Sample records for accelerator systems division

  1. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    (Chairman) F. Willeke, DESY 1. Follow up of previous Meeting The first report by the DANE Machine AdvisoryK K DANE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, May 11, 2000 Note: G-55 Report by DANE Machine Advisory Panel on 2nd Meeting held on 4-5 May 2000 J. M. Jowett, CERN S. Myers, CERN

  2. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    K K DANE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, 28 November, 2002 IR-12 together with the total losses around the rings. Results seem encouraging, as calculated loss rates at IR2 in details and compared to calculated losses for the KLOE and the DEAR cases. 1 Introduction Background rates

  3. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    K K DANE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, March 10, 1997 Note: BM-1 BUNCH current. This measurement allows to calculate energy losses due to parasitic beam-vacuum chamber losses. In this Note we present results of the measurements and their analysis, comparing the results

  4. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    KKKK KKKK DANE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, January 13, 1993 Note: IR to see how much heat has to be removed. The two main sources of heat are: 1) Resistive losses due. Technol. 5(6) 3446 (1987). #12;IR-1 pg. 6 APPENDIX IA Losses in the I.R. 1) Resistive losses in Be: dp dz

  5. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    KKKK KKKK DANE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, October 26, 1994 Note: RF enough (i.e. if the parasitic losses are low with respect to the energy left by each passing bunch-zero longitudinal electric field on the cavity axis. Being azimuthally symmetric, it is possible to calculate them

  6. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    K K DANE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, July 16, 1996 Note: RF-19 losses and prevents to reach the operating voltage range. The RF cavity of the DANE -Factory Accumulator and electrical conductivities. Multipactoring (MP) is a phenomenon of resonant electron discharge which can occur

  7. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    K K DANE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, December 14, 1995 Note: CD-5, are also needed in order to minimise the losses. In order to use this device as a transverse kicker, two) excitation. #12;CD-5 pg. 3 The combined magnetic and electric field gives a net deflecting Lorentz force

  8. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    KKKK KKKK DANE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, Sept. 26, 1991 Note: RF-4 and vacuum simpler and less expensive. The cavity will be made of copper which has better electrical and thermal conductivity to reduce the RF losses and keep the cooling easier. #12;RF-4 pg. 2 Multipacting (MP

  9. Accelerator Technology Division progress report, FY 1992

    SciTech Connect (OSTI)

    Schriber, S.O.; Hardekopf, R.A.; Heighway, E.A.

    1993-07-01T23:59:59.000Z

    This report briefly discusses the following topics: The Ground Test Accelerator Program; Defense Free-Electron Lasers; AXY Programs; A Next Generation High-Power Neutron-Scattering Facility; JAERI OMEGA Project and Intense Neutron Sources for Materials Testing; Advanced Free-Electron Laser Initiative; Superconducting Supercollider; The High-Power Microwave (HPM) Program; Neutral Particle Beam (NPB) Power Systems Highlights; Industrial Partnering; Accelerator Physics and Special Projects; Magnetic Optics and Beam Diagnostics; Accelerator Design and Engineering; Radio-Frequency Technology; Accelerator Theory and Free-Electron Laser Technology; Accelerator Controls and Automation; Very High-Power Microwave Sources and Effects; and GTA Installation, Commissioning, and Operations.

  10. Guidance Systems Division ,

    Office of Legacy Management (LM)

    Oockec No. 10-0772 22 OCT 1981 Bcndlx CorporaLion ' Guidance Systems Division , ATTN: Mr. Wf 11 la,,, Hnrr,,or Manngar, PlanL Englne0rtny Teterboro, New Jersey 07608 uwm STATES...

  11. integration division Human Systems

    E-Print Network [OSTI]

    integration division Human Systems Eye-Movement Metrics: Non-Intrusive Quantitative Tools for Monitoring Human Visual Performance Objective Approach Impact A reliable quantitative yet non-intrusive methodologies that provide quantitative yet non-intrusive measures of human visual performance for use

  12. Accelerator and Fusion Research Division 1989 summary of activities

    SciTech Connect (OSTI)

    Not Available

    1990-06-01T23:59:59.000Z

    This report discusses the research being conducted at Lawrence Berkeley Laboratory's Accelerator and Fusion Research Division. The main topics covered are: heavy-ion fusion accelerator research; magnetic fusion energy; advanced light source; center for x-ray optics; exploratory studies; high-energy physics technology; and bevalac operations.

  13. Accelerator Technology Division progress report, FY 1993

    SciTech Connect (OSTI)

    Schriber, S.O.; Hardekopf, R.A.; Heighway, E.A.

    1993-12-31T23:59:59.000Z

    This report discusses the following topics: A Next-Generation Spallation-Neutron Source; Accelerator Performance Demonstration Facility; APEX Free-Electron Laser Project; The Ground Test Accelerator (GTA) Program; Intense Neutron Source for Materials Testing; Linac Physics and Special Projects; Magnetic Optics and Beam Diagnostics; Radio-Frequency Technology; Accelerator Controls and Automation; Very High-Power Microwave Sources and Effects; and GTA Installation, Commissioning, and Operation.

  14. Accelerator & Fusion Research Division: 1993 Summary of activities

    SciTech Connect (OSTI)

    Chew, J.

    1994-04-01T23:59:59.000Z

    The Accelerator and Fusion Research Division (AFRD) is not only one of the largest scientific divisions at LBL, but also the one of the most diverse. Major efforts include: (1) investigations in both inertial and magnetic fusion energy; (2) operation of the Advanced Light Source, a state-of-the-art synchrotron radiation facility; (3) exploratory investigations of novel radiation sources and colliders; (4) research and development in superconducting magnets for accelerators and other scientific and industrial applications; and (5) ion beam technology development for nuclear physics and for industrial and biomedical applications. Each of these topics is discussed in detail in this book.

  15. Systems Division NO. REV. NO.

    E-Print Network [OSTI]

    Rathbun, Julie A.

    Conditioning Unit (PCU) is compatible with a solar panel array. The Solar Panel Simulator and the PCU Test SetAerospace Systems Division NO. REV. NO. EATM-17 PCU - SOLAR PANEL SIMULATOR TEST REPORT:' Courtois ~ll~K. Hsi #12;MO. REV. MO. EATM-17 ~ Systems Division PCU - Solar Panel Simulator Test Report

  16. DA NE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    K K DA NE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, Sept. 2, 1991 Note: G-7 ENERGY LOSS DUE TO THE BROAD-BAND IMPEDANCE IN DA NE L. Palumbo, M. Serio 1. INTRODUCTION The Broad-Band (BB to simplify the evaluation of single-bunch instability thresholds and parasitic losses [1]. Lacking detailed

  17. DA NE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    K K DA NE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, Sept. 2, 1991 Note: G-8 RF AND RESISTIVE ENERGY LOSS IN THE INTERACTION REGION VACUUM CHAMBER S. Bartalucci, L. Palumbo, M. Serio, B-section variation leads to sub- stantial energy losses localized in the IR vacuum chamber even if the steps in cross

  18. DA NE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    K K DA NE TECHNICAL NOTE INFN - LNF, Accelerator Division Frascati, April 6, 1992 Note: G-13 RF ENERGY LOSSES AND IMPEDANCE OF THE DA NE ACCUMULATOR RING VACUUM CHAMBER S. Bartalucci, L. Palumbo, M chamber. This field acts back on the beam and it is re- sponsible for energy losses and instabilities. We

  19. Division 1137 property control system

    SciTech Connect (OSTI)

    Pastor, D.J.

    1982-01-01T23:59:59.000Z

    An automated data processing property control system was developed by Mobile and Remote Range Division 1137. This report describes the operation of the system and examines ways of using it in operational planning and control.

  20. Accelerator and Fusion Research Division: summary of activities, 1983

    SciTech Connect (OSTI)

    Not Available

    1984-08-01T23:59:59.000Z

    The activities described in this summary of the Accelerator and Fusion Research Division are diverse, yet united by a common theme: it is our purpose to explore technologically advanced techniques for the production, acceleration, or transport of high-energy beams. These beams may be the heavy ions of interest in nuclear science, medical research, and heavy-ion inertial-confinement fusion; they may be beams of deuterium and hydrogen atoms, used to heat and confine plasmas in magnetic fusion experiments; they may be ultrahigh-energy protons for the next high-energy hadron collider; or they may be high-brilliance, highly coherent, picosecond pulses of synchrotron radiation.

  1. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    THE RADIOFREQUENCY SYSTEM FOR DANE: FIRST REMARKS R. Boni, A. Gallo INTRODUCTION This note presents some considerations on the Radiofrequency System (RFS) for DANE. It is worthed to mention that the RFS has to supply to the beams the energy lost by synchrotron radiation and parasitic losses. We propose two different solutions

  2. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    of the utilities (electrical power substation and cooling system) in the linac tunnel and klystron gallery before. Hutton (CEBAF), Chairman W. Scandale (CERN) A. Wrülich (ST) Overall Project Progress and Status The Committee noted the progress made since the last Review and is pleased to see that the major Project

  3. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    compounds), a large reduction of these peaks will indicate the end of the treatement. e) A Nitrogen glow will be vented with slight positive dry Nitrogen and sealed until ready to be installed. 2) Vacuum Group has safety problems). We have to study the best solution for our system. 6) Titanium ion pumps. Star-Cell ion

  4. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    of a synchrotron radiation device, because the solenoidal field at the IP is longitudinal. An electrostatic system-3 A LUMINOSITY MONITOR FOR DANE M. Preger 1. Introduction A fast and precise luminosity monitor, based on the direct measurement of an electromagnetic reaction, is one of the possible tools for real

  5. Accelerator and Fusion Research Division: 1984 summary of activities

    SciTech Connect (OSTI)

    Not Available

    1985-05-01T23:59:59.000Z

    During fiscal 1984, major programmatic activities in AFRD continued in each of five areas: accelerator operations, highlighted by the work of nuclear science users, who produced clear evidence for the formation of compressed nuclear matter during heavy-ion collisions; high-energy physics, increasingly dominated by our participation in the design of the Superconducting Super Collider; heavy-ion fusion accelerator research, which focused on the design of a four-beam experiment as a first step toward assessing the promise of heavy-ion inertial-confinement fusion; and research at the Center for X-Ray Optics, which completed its first year of broadly based activities aimed at the exploitation of x-ray and ultraviolet radiation. At the same time, exploratory studies were under way, aimed at investigating major new programs for the division. During the past year, for example, we took a preliminary look at how we could use the Bevatron as an injector for a pair of colliding-beam rings that might provide the first glimpse of a hitherto unobserved state of matter called the quark-gluon plasma. Together with Livermore scientists, we also conducted pioneering high-gain free-electron laser (FEL) experiments and proposed a new FEL-based scheme (called the two-beam accelerator) for accelerating electrons to very high energies. And we began work on the design of the Coherent XUV Facility (CXF), an advanced electron storage ring for the production of intense coherent radiation from either undulators or free-electron lasers.

  6. RFQ accelerator tuning system

    DOE Patents [OSTI]

    Bolie, Victor W. (Albuquerque, NM)

    1990-01-01T23:59:59.000Z

    A cooling system is provided for maintaining a preselected operating temperature in a device, which may be an RFQ accelerator, having a variable heat removal requirement, by circulating a cooling fluid through a cooling system remote from the device. Internal sensors in the device enable an estimated error signal to be generated from parameters which are indicative of the heat removal requirement from the device. Sensors are provided at predetermined locations in the cooling system for outputting operational temperature signals. Analog and digital computers define a control signal functionally related to the temperature signals and the estimated error signal, where the control signal is defined effective to return the device to the preselected operating temperature in a stable manner. The cooling system includes a first heat sink responsive to a first portion of the control signal to remove heat from a major portion of the circulating fluid. A second heat sink is responsive to a second portion of the control signal to remove heat from a minor portion of the circulating fluid. The cooled major and minor portions of the circulating fluid are mixed in response to a mixing portion of the control signal, which is effective to proportion the major and minor portions of the circulating fluid to establish a mixed fluid temperature which is effective to define the preselected operating temperature for the remote device. In an RFQ environment the stable temperature control enables the resonant frequency of the device to be maintained at substantially a predetermined value during transient operations.

  7. RFQ accelerator tuning system

    DOE Patents [OSTI]

    Bolie, V.W.

    1990-07-03T23:59:59.000Z

    A cooling system is provided for maintaining a preselected operating temperature in a device, which may be an RFQ accelerator, having a variable heat removal requirement, by circulating a cooling fluid through a cooling system remote from the device. Internal sensors in the device enable an estimated error signal to be generated from parameters which are indicative of the heat removal requirement from the device. Sensors are provided at predetermined locations in the cooling system for outputting operational temperature signals. Analog and digital computers define a control signal functionally related to the temperature signals and the estimated error signal, where the control signal is defined effective to return the device to the preselected operating temperature in a stable manner. The cooling system includes a first heat sink responsive to a first portion of the control signal to remove heat from a major portion of the circulating fluid. A second heat sink is responsive to a second portion of the control signal to remove heat from a minor portion of the circulating fluid. The cooled major and minor portions of the circulating fluid are mixed in response to a mixing portion of the control signal, which is effective to proportion the major and minor portions of the circulating fluid to establish a mixed fluid temperature which is effective to define the preselected operating temperature for the remote device. In an RFQ environment the stable temperature control enables the resonant frequency of the device to be maintained at substantially a predetermined value during transient operations. 3 figs.

  8. NO. REV. NO. Systems Division DATE

    E-Print Network [OSTI]

    Rathbun, Julie A.

    -~ NO. REV. NO. EATM-15 PAGE OF ~ Systems Division DATE EASEP /PSEP Solar Panel Development Design+"'--.:L'_;;;J....;::::::..··-=·~::!!:!!!e::...._ K. Hsi #12;NO. REV. NO. EATM-15 EASEP/PSEP Solar Panel Development ~ Systems Division Design of the EASE-PSEP Solar Panel Array~PA::G:,:E:..::=l=~o:F~=2=7= DATE 20 Nov. 1968 1. 0 SUMMARY Electrical power

  9. Accelerator Fusion Research Division 1991 summary of activities

    SciTech Connect (OSTI)

    Berkner, Klaus H.

    1991-12-01T23:59:59.000Z

    This report discusses research projects in the following areas: Heavy-ion fusion accelerator research; magnetic fusion energy; advanced light source; center for x-ray optics; exploratory studies; superconducting magnets; and bevalac operations.

  10. Accelerator & Fusion Research Division 1991 summary of activities

    SciTech Connect (OSTI)

    Not Available

    1991-12-01T23:59:59.000Z

    This report discusses research projects in the following areas: Heavy-ion fusion accelerator research; magnetic fusion energy; advanced light source; center for x-ray optics; exploratory studies; superconducting magnets; and bevalac operations.

  11. Accelerator and fusion research division. 1992 Summary of activities

    SciTech Connect (OSTI)

    Not Available

    1992-12-01T23:59:59.000Z

    This report contains brief discussions on research topics in the following area: Heavy-Ion Fusion Accelerator Research; Magnetic Fusion Energy; Advanced Light Source; Center for Beam Physics; Superconducting Magnets; and Bevalac Operations.

  12. Accelerator and Fusion Research Division: 1987 summary of activities

    SciTech Connect (OSTI)

    Not Available

    1988-04-01T23:59:59.000Z

    An overview of the design and the initial studies for the Advanced Light Source is given. The research efforts for the Center for X-Ray Optics include x-ray imaging, multilayer mirror technology, x-ray sources and detectors, spectroscopy and scattering, and synchrotron radiation projects. The Accelerator Operations highlights include the research by users in nuclear physics, biology and medicine. The upgrade of the Bevalac is also discussed. The High Energy Physics Technology review includes the development of superconducting magnets and superconducting cables. A review of the Heavy-Ion Fusion Accelerator Research is also presented. The Magnetic Fusion Energy research included the development of ion sources, accelerators for negative ions, diagnostics, and theoretical plasma physics. (WRF)

  13. ENABLING SYSTEMS THINKING TO ACCELERATE THE DEVELOPMENT OF SENIOR SYSTEMS ENGINEERS

    E-Print Network [OSTI]

    de Weck, Olivier L.

    ENABLING SYSTEMS THINKING TO ACCELERATE THE DEVELOPMENT OF SENIOR SYSTEMS ENGINEERS by Heidi Leoti of Cincinnati SUBMITTED TO THE ENGINEERING SYSTEMS DIVISION IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF DOCTOR OF PHILOSOPHY IN ENGINEERING SYSTEMS AT THE MASSACHUSETTS INSTITUTE OF TECHNOLOGY

  14. Parametric Study of Emerging High Power Accelerator Applications Using Accelerator Systems Model (ASM)

    E-Print Network [OSTI]

    Berwald, D H; Myers, T J; Paulson, C C; Peacock, M A; Piaszczyk, C M; Rathke, J W; Piechowiak, E M

    1996-01-01T23:59:59.000Z

    Parametric Study of Emerging High Power Accelerator Applications Using Accelerator Systems Model (ASM)

  15. accelerator division annual: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Multiprocessor Control System for the Frascati Storage Rings DANE Giampiero Di Pirro, Catia Istituto Nazionale di Fisica Nucleare (INFN) 87 DANE TECHNICAL NOTE INFN -LNF,...

  16. accelerator technology division: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Ecology Websites Summary: energy supply is based on solar thermal collectors, a photovoltaic system, as well as building technology such as outside temperature and solar...

  17. Accelerator Division

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProducts (VAP) VAP7-0973 1 Introduction In theACME -Toggle Fermilab Navbar Toggle

  18. Analytical Chemistry Division's sample transaction system

    SciTech Connect (OSTI)

    Stanton, J.S.; Tilson, P.A.

    1980-10-01T23:59:59.000Z

    The Analytical Chemistry Division uses the DECsystem-10 computer for a wide range of tasks: sample management, timekeeping, quality assurance, and data calculation. This document describes the features and operating characteristics of many of the computer programs used by the Division. The descriptions are divided into chapters which cover all of the information about one aspect of the Analytical Chemistry Division's computer processing.

  19. Modified Accelerated Cost-Recovery System (MACRS)

    Broader source: Energy.gov [DOE]

    Under the federal Modified Accelerated Cost-Recovery System (MACRS), businesses may recover investments in certain property through depreciation deductions. The MACRS establishes a set of class l...

  20. Solar system constraints on Rindler acceleration

    E-Print Network [OSTI]

    Sante Carloni; Daniel Grumiller; Florian Preis

    2011-05-09T23:59:59.000Z

    We discuss the classical tests of general relativity in the presence of Rindler acceleration. Among these tests the perihelion shifts give the tightest constraints and indicate that the Pioneer anomaly cannot be caused by a universal solar system Rindler acceleration. We address potential caveats for massive test-objects. Our tightest bound on Rindler acceleration that comes with no caveats is derived from radar echo delay and yields |a|<3nm/s^2.

  1. Harrison Radiator Division's Energy Management, Reporting and Accounting System

    E-Print Network [OSTI]

    Goubeaux, R. J.

    HARRISON RADIATOR DIVISION'S ENERGY MANAGEMENT, REPORTING and ACCOUNTING SYSTEM Ronald J. Goubeaux Harrison Radiator Division Lockport, New York ABSTRACT Energy management is essential for obtaining the lowest possible product..., farm equipment, small aircraft and other types of vehicles. The energy management, reporting and accounting system that is covered in this paper is operating in Harrison's West Complex of the New York Operations located in Lockport, Western...

  2. SLAC National Accelerator Laboratory Persis Drell, Director

    E-Print Network [OSTI]

    Quake, Stephen R.

    . Reichanadter, Acting ALD L. Dardzinski Interim Assistant Director LCLS Directorate J. Stöhr, ALD U. Bergmann, Facilities LCLS-II John Galayda Mechanical Engineering and Technical Support Division K. Fant Accelerator Research Division E. Colby LCLS Accelerator Systems Division A. Brachmann Instrumentation & Controls

  3. Accelerating the transformation of power systems

    E-Print Network [OSTI]

    Accelerating the transformation of power systems Introduction Flexibility of operation--the ability of a power system to respond to change in demand and supply--is a characteristic of all power systems. Flexibility is especially prized in twenty-first century power systems, with higher levels of grid

  4. Vehicle Systems Integration Laboratory Accelerates Powertrain Development

    SciTech Connect (OSTI)

    None

    2014-04-15T23:59:59.000Z

    ORNL's Vehicle Systems Integration (VSI) Laboratory accelerates the pace of powertrain development by performing prototype research and characterization of advanced systems and hardware components. The VSI Lab is capable of accommodating a range of platforms from advanced light-duty vehicles to hybridized Class 8 powertrains with the goals of improving overall system efficiency and reducing emissions.

  5. Vehicle Systems Integration Laboratory Accelerates Powertrain Development

    ScienceCinema (OSTI)

    None

    2014-06-25T23:59:59.000Z

    ORNL's Vehicle Systems Integration (VSI) Laboratory accelerates the pace of powertrain development by performing prototype research and characterization of advanced systems and hardware components. The VSI Lab is capable of accommodating a range of platforms from advanced light-duty vehicles to hybridized Class 8 powertrains with the goals of improving overall system efficiency and reducing emissions.

  6. Accelerating the transformation of power systems

    E-Print Network [OSTI]

    Accelerating the transformation of power systems Ancillary Services Peer Exchange with India in power system transformation is an increasingly vital resource for national and subnational decision of power systems. The Power Partnership is a multilateral effort of the Clean Energy Ministerial and serves

  7. Application accelerator system having bunch control

    DOE Patents [OSTI]

    Wang, Dunxiong (Newport News, VA); Krafft, Geoffrey Arthur (Newport News, VA)

    1999-01-01T23:59:59.000Z

    An application accelerator system for monitoring the gain of a free electron laser. Coherent Synchrotron Radiation (CSR) detection techniques are used with a bunch length monitor for ultra short, picosec to several tens of femtosec, electron bunches. The monitor employs an application accelerator, a coherent radiation production device, an optical or beam chopping device, an infrared radiation collection device, a narrow-banding filter, an infrared detection device, and a control.

  8. Application accelerator system having bunch control

    DOE Patents [OSTI]

    Wang, D.; Krafft, G.A.

    1999-06-22T23:59:59.000Z

    An application accelerator system for monitoring the gain of a free electron laser is disclosed. Coherent Synchrotron Radiation (CSR) detection techniques are used with a bunch length monitor for ultra short, picosec to several tens of femtosec, electron bunches. The monitor employs an application accelerator, a coherent radiation production device, an optical or beam chopping device, an infrared radiation collection device, a narrow-banding filter, an infrared detection device, and a control. 1 fig.

  9. Fermilab accelerator control system: Analog monitoring facilities

    SciTech Connect (OSTI)

    Seino, K.; Anderson, L.; Smedinghoff, J.

    1987-10-01T23:59:59.000Z

    Thousands of analog signals are monitored in different areas of the Fermilab accelerator complex. For general purposes, analog signals are sent over coaxial or twinaxial cables with varying lengths, collected at fan-in boxes and digitized with 12 bit multiplexed ADCs. For higher resolution requirements, analog signals are digitized at sources and are serially sent to the control system. This paper surveys ADC subsystems that are used with the accelerator control systems and discusses practical problems and solutions, and it describes how analog data are presented on the console system.

  10. Generic device controller for accelerator control systems

    SciTech Connect (OSTI)

    Mariotti, R.; Buxton, W.; Frankel, R.; Hoff, L.

    1987-01-01T23:59:59.000Z

    A new distributed intelligence control system has become operational at the AGS for transport, injection, and acceleration of heavy ions. A brief description of the functionality of the physical devices making up the system is given. An attempt has been made to integrate the devices for accelerator specific interfacing into a standard microprocessor system, namely, the Universal Device Controller (UDC). The main goals for such a generic device controller are to provide: local computing power; flexibility to configure; and real time event handling. The UDC assemblies and software are described. (LEW)

  11. BNL ACCELERATOR TEST FACILITY CONTROL SYSTEM UPGRADE R. Malone...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ACCELERATOR TEST FACILITY CONTROL SYSTEM UPGRADE R. Malone, I. Ben-Zvi, X. Wang, V. Yakimenko BNL , Upton, NY 11973, USA Abstract Brookhaven National Laboratory's Accelerator...

  12. The BNL Accelerator Test Facility control system

    SciTech Connect (OSTI)

    Malone, R.; Bottke, I.; Fernow, R.; Ben-Zvi, I.

    1993-01-01T23:59:59.000Z

    Described is the VAX/CAMAC-based control system for Brookhaven National Laboratory's Accelerator Test Facility, a laser/linac research complex. Details of hardware and software configurations are presented along with experiences of using Vsystem, a commercial control system package.

  13. Ground test accelerator control system software

    SciTech Connect (OSTI)

    Burczyk, L.; Dalesio, R.; Dingler, R.; Hill, J.; Howell, J.A.; Kerstiens, D.; King, R.; Kozubal, A.; Little, C.; Martz, V.; Rothrock, R.; Sutton, J.

    1988-01-01T23:59:59.000Z

    The GTA control system provides an environment in which the automation of a state-of-the-art accelerator can be developed. It makes use of commercially available computers, workstations, computer networks, industrial I/O equipment, and software. This system has built-in supervisory control (like most accelerator control systems), tools to support continuous control (like the process control industry), and sequential control for automatic startup and fault recovery (like few other accelerator control systems). Several software tools support these levels of control: a real-time operating system (VxWorks) with a real-time kernel (VRTX), a configuration database, a sequencer, and a graphics editor. VxWorks supports multitasking, fast context-switching, and preemptive scheduling. VxWorks/VRTX is a network-based development environment specifically designed to work in partnership with the UNIX operating system. A database provides the interface to the accelerator components. It consists of a run time library and a database configuration and editing tool. A sequencer initiates and controls the operation of all sequence programs (expressed as state programs). A graphics editor gives the user the ability to create color graphic displays showing the state of the machine in either text or graphics form. 11 refs., 2 figs.

  14. Energy and Environmental Systems Division's publications publications 1968-1982

    SciTech Connect (OSTI)

    none,

    1982-03-01T23:59:59.000Z

    Books, journal articles, conference papers, and technical reports produced by the Energy and Environmental Systems Division of Argonne National Laboratory are listed in this bibliography. Subjects covered are energy resources (recovery and use); energy-efficient technology; electric utilities, and environments. (MCW)

  15. Interface control document between the Tank Waste Remediation System and the Solid Waste Disposal Division

    SciTech Connect (OSTI)

    Duncan, D.R.

    1995-04-01T23:59:59.000Z

    This document discusses the interface between the Tank Waste Remediation System (TWRS) and the Solid Waste Division (SWD).

  16. Induction accelerators for the phase rotator system

    SciTech Connect (OSTI)

    Reginato, Lou; Yu, Simon; Vanecek, Dave

    2001-07-30T23:59:59.000Z

    The principle of magnetic induction has been applied to the acceleration of high current beams in betatrons and a variety of induction accelerators. The linear induction accelerator (LIA) consists of a simple nonresonant structure where the drive voltage is applied to an axially symmetric gap that encloses a toroidal ferromagnetic material. The change in flux in the magnetic core induces an axial electric field that provides particle acceleration. This simple nonresonant (low Q) structure acts as a single turn transformer that can accelerate from hundreds of amperes to tens of kiloamperes, basically only limited by the drive impedance. The LIA is typically a low gradient structure that can provide acceleration fields of varying shapes and time durations from tens of nanoseconds to several microseconds. The efficiency of the LIA depends on the beam current and can exceed 50% if the beam current exceeds the magnetization current required by the ferromagnetic material. The acceleration voltage available is simply given by the expression V=A dB/dt. Hence, for a given cross section of material, the beam pulse duration influences the energy gain. Furthermore, a premium is put on minimizing the diameter, which impacts the total weight or cost of the magnetic material. The diameter doubly impacts the cost of the LIA since the power (cost) to drive the cores is proportional to the volume as well. The waveform requirements during the beam pulse makes it necessary to make provisions in the pulsing system to maintain the desired dB/dt during the useful part of the acceleration cycle. This is typically done two ways, by using the final stage of the pulse forming network (PFN) and by the pulse compensation network usually in close proximity of the acceleration cell. The choice of magnetic materials will be made by testing various materials both ferromagnetic and ferrimagnetic. These materials will include the nickel-iron, silicon steel amorphous and various types of ferrites not only to determine the properties that are essential in this application but the energy losses in the magnetization process which directly impact the cost.

  17. Application of local area networks to accelerator control systems at the Stanford Linear Accelerator

    SciTech Connect (OSTI)

    Fox, J.D.; Linstadt, E.; Melen, R.

    1983-03-01T23:59:59.000Z

    The history and current status of SLAC's SDLC networks for distributed accelerator control systems are discussed. These local area networks have been used for instrumentation and control of the linear accelerator. Network topologies, protocols, physical links, and logical interconnections are discussed for specific applications in distributed data acquisition and control system, computer networks and accelerator operations.

  18. Application of local area networks to accelerator control systems at the Stanford linear accelerator

    SciTech Connect (OSTI)

    Fox, J.D.; Linstadt, E.; Melen, R.

    1983-08-01T23:59:59.000Z

    The history and current status of SLAC's SDLC networks for distributed accelerator control systems are discussed. These local area networks have been used for instrumentation and control of the linear accelerator. Network topologies, protocols, physical links, and logical interconnections are discussed for specific applications in distributed data acquisition and control systems, computer networks and accelerator operations.

  19. Physics division annual report 2006.

    SciTech Connect (OSTI)

    Glover, J.; Physics

    2008-02-28T23:59:59.000Z

    This report highlights the activities of the Physics Division of Argonne National Laboratory in 2006. The Division's programs include the operation as a national user facility of ATLAS, the Argonne Tandem Linear Accelerator System, research in nuclear structure and reactions, nuclear astrophysics, nuclear theory, investigations in medium-energy nuclear physics as well as research and development in accelerator technology. The mission of nuclear physics is to understand the origin, evolution and structure of baryonic matter in the universe--the core of matter, the fuel of stars, and the basic constituent of life itself. The Division's research focuses on innovative new ways to address this mission.

  20. Hardware Accelerator for MIMO Wireless Systems

    E-Print Network [OSTI]

    Bhagawat, Pankaj

    2012-02-14T23:59:59.000Z

    of DOCTOR OF PHILOSOPHY Approved by: Chair of Committee, Gwan Choi Committee Members, Jiang Hu Rabi Mahapatra Jim Ji Head of Department, Costas Georghiades December 2011 Major Subject: Computer Engineering iii ABSTRACT Hardware Accelerator for MIMO... Wireless Systems. (December 2011) Pankaj Bhagawat, B.S., National Insitute of Technology, Tiruchirapally, India; M.S., Texas A&M University Chair of Advisory Committee: Dr. Gwan Choi Ever increasing demand for higher data rates and better Quality...

  1. Energy and Environmental Systems Division 1981 research review

    SciTech Connect (OSTI)

    Not Available

    1982-04-01T23:59:59.000Z

    To effectively manage the nation's energy and natural resources, government and industry leaders need accurate information regarding the performance and economics of advanced energy systems and the costs and benefits of public-sector initiatives. The Energy and Environmental Systems Division (EES) of Argonne National Laboratory conducts applied research and development programs that provide such information through systems analysis, geophysical field research, and engineering studies. During 1981, the division: analyzed the production economics of specific energy resources, such as biomass and tight sands gas; developed and transferred to industry economically efficient techniques for addressing energy-related resource management and environmental protection problems, such as the reclamation of strip-mined land; determined the engineering performance and cost of advanced energy-supply and pollution-control systems; analyzed future markets for district heating systems and other emerging energy technologies; determined, in strategic planning studies, the availability of resources needed for new energy technologies, such as the imported metals used in advanced electric-vehicle batteries; evaluated the effectiveness of strategies for reducing scarce-fuel consumption in the transportation sector; identified the costs and benefits of measures designed to stabilize the financial condition of US electric utilities; estimated the costs of nuclear reactor shutdowns and evaluated geologic conditions at potential sites for permanent underground storage of nuclear waste; evaluated the cost-effectiveness of environmental regulations, particularly those affecting coal combustion; and identified the environmental effects of energy technologies and transportation systems.

  2. Systems and methods for the magnetic insulation of accelerator electrodes in electrostatic accelerators

    DOE Patents [OSTI]

    Grisham, Larry R

    2013-12-17T23:59:59.000Z

    The present invention provides systems and methods for the magnetic insulation of accelerator electrodes in electrostatic accelerators. Advantageously, the systems and methods of the present invention improve the practically obtainable performance of these electrostatic accelerators by addressing, among other things, voltage holding problems and conditioning issues. The problems and issues are addressed by flowing electric currents along these accelerator electrodes to produce magnetic fields that envelope the accelerator electrodes and their support structures, so as to prevent very low energy electrons from leaving the surfaces of the accelerator electrodes and subsequently picking up energy from the surrounding electric field. In various applications, this magnetic insulation must only produce modest gains in voltage holding capability to represent a significant achievement.

  3. accelerator driven systems: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    purpose of incinerating long-lived radionuclides in high- level waste 5 Thorium as a Fuel for Accelerator Driven Subcritical Electronuclear Systems CERN Preprints Summary:...

  4. accelerator driven system: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    purpose of incinerating long-lived radionuclides in high- level waste 5 Thorium as a Fuel for Accelerator Driven Subcritical Electronuclear Systems CERN Preprints Summary:...

  5. Doctor of Engineering internship experience at Ball Aerospace Systems Division, Boulder, Colorado: an internship report

    E-Print Network [OSTI]

    Larson, Wiley J.

    2013-03-13T23:59:59.000Z

    This monograph describes the author's internship experiences at Ball Aerospace Systems Division, Boulder, Colorado. A system-level spacecraft design procedure is presented. It describes a spacecraft design flow with emphasis...

  6. From US NAVY Mate to Division Leader for Operations - Requirements, Development and Career Paths of LANL/LANSCE Accelerator Operators

    SciTech Connect (OSTI)

    Spickermann, Thomas [Los Alamos National Laboratory

    2012-07-26T23:59:59.000Z

    There are opportunities for advancement within the team. Operators advance by: (1) Becoming fully qualified - following the LANSCE Accelerator Operator Training Manual, Operator trainees go through 5 levels of qualification, from Radiation Security System to Experimental Area Operator. Must obtain Knowledge and Performance checkouts by an OSS or AOSS, and an End-of-Card checkout by the team leader or RSS engineer (level I). Program was inspired by US NAVY qualification program for nuclear reactor operators. Time to complete: 2-2.5 years. (2) Fully qualified operators are eligible to apply for vacant (OSS)/AOSS positions; and (3) Alternatively, experienced operators can sign up for the voluntary Senior Operator Qualification Program. They must demonstrate in-depth knowledge of all areas of the accelerator complex. Time to complete is 2-3 years (Minimum 4 years from fully qualified). Eligible for promotion to level between qualified operator and AOSS.

  7. SYSTEMS DIVISION RESEARCH 2013 1 Abstract--This research seeks to define an appropriate

    E-Print Network [OSTI]

    SYSTEMS DIVISION RESEARCH 2013 1 1 Abstract-- This research seeks to define an appropriate System of Systems (SoS) Risk Management framework and the production of a support tool enabling Management literature. Index Terms--Systems Engineering, System of Systems, System of Systems Engineering

  8. Optical add/drop filter for wavelength division multiplexed systems

    DOE Patents [OSTI]

    Deri, Robert J. (Pleasanton, CA); Strand, Oliver T. (Castro Valley, CA); Garrett, Henry E. (Livermore, CA)

    2002-01-01T23:59:59.000Z

    An optical add/drop filter for wavelength division multiplexed systems and construction methods are disclosed. The add/drop filter includes a first ferrule having a first pre-formed opening for receiving a first optical fiber; an interference filter oriented to pass a first set of wavelengths along the first optical fiber and reflect a second set of wavelengths; and, a second ferrule having a second pre-formed opening for receiving the second optical fiber, and the reflected second set of wavelengths. A method for constructing the optical add/drop filter consists of the steps of forming a first set of openings in a first ferrule; inserting a first set of optical fibers into the first set of openings; forming a first set of guide pin openings in the first ferrule; dividing the first ferrule into a first ferrule portion and a second ferrule portion; forming an interference filter on the first ferrule portion; inserting guide pins through the first set of guide pin openings in the first ferrule portion and second ferrule portion to passively align the first set of optical fibers; removing material such that light reflected from the interference filter from the first set of optical fibers is accessible; forming a second set of openings in a second ferrule; inserting a second set of optical fibers into the second set of openings; and positioning the second ferrule with respect to the first ferrule such that the second set of optical fibers receive the light reflected from the interference filter.

  9. Small system for tritium accelerator mass spectrometry

    DOE Patents [OSTI]

    Roberts, M.L.; Davis, J.C.

    1993-02-23T23:59:59.000Z

    Apparatus for ionizing and accelerating a sample containing isotopes of hydrogen and detecting the ratios of hydrogen isotopes contained in the sample is disclosed. An ion source generates a substantially linear ion beam including ions of tritium from the sample. A radio-frequency quadrupole accelerator is directly coupled to and axially aligned with the source at an angle of substantially zero degrees. The accelerator accelerates species of the sample having different mass to different energy levels along the same axis as the ion beam. A spectrometer is used to detect the concentration of tritium ions in the sample. In one form of the invention, an energy loss spectrometer is used which includes a foil to block the passage of hydrogen, deuterium and [sup 3]He ions, and a surface barrier or scintillation detector to detect the concentration of tritium ions. In another form of the invention, a combined momentum/energy loss spectrometer is used which includes a magnet to separate the ion beams, with Faraday cups to measure the hydrogen and deuterium and a surface barrier or scintillation detector for the tritium ions.

  10. Small system for tritium accelerator mass spectrometry

    DOE Patents [OSTI]

    Roberts, Mark L. (Livermore, CA); Davis, Jay C. (Livermore, CA)

    1993-01-01T23:59:59.000Z

    Apparatus for ionizing and accelerating a sample containing isotopes of hydrogen and detecting the ratios of hydrogen isotopes contained in the sample is disclosed. An ion source generates a substantially linear ion beam including ions of tritium from the sample. A radio-frequency quadrupole accelerator is directly coupled to and axially aligned with the source at an angle of substantially zero degrees. The accelerator accelerates species of the sample having different mass to different energy levels along the same axis as the ion beam. A spectrometer is used to detect the concentration of tritium ions in the sample. In one form of the invention, an energy loss spectrometer is used which includes a foil to block the passage of hydrogen, deuterium and .sup.3 He ions, and a surface barrier or scintillation detector to detect the concentration of tritium ions. In another form of the invention, a combined momentum/energy loss spectrometer is used which includes a magnet to separate the ion beams, with Faraday cups to measure the hydrogen and deuterium and a surface barrier or scintillation detector for the tritium ions.

  11. accelerator elektroniczny system: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Preprints Summary: The vacuum control system of most of the CERN accelerators is based on Siemens PLCs and on PVSS SCADA. After the transition from the LHC commissioning phase to...

  12. Intern experience at Honeywell, Inc., Large Information Systems Division: an internship report

    E-Print Network [OSTI]

    Ismail, Abdel-Wahab Tarek, 1956-

    2013-03-13T23:59:59.000Z

    This report describes the author's internship assignment at Honeywell Inc. - Large Information Systems Division from January, 1982 through August, 1982. The purpose of the assignment was to fulfill the internship requirements...

  13. A new tool for accelerator system modeling and analysis

    SciTech Connect (OSTI)

    Gillespie, G.H.; Hill, B.W. [G.H. Gillespie Associates, Inc., Del Mar, CA (United States); Jameson, R.A. [Los Alamos National Lab., NM (United States)

    1994-09-01T23:59:59.000Z

    A novel computer code is being developed to generate system level designs of radiofrequency ion accelerators. The goal of the Accelerator System Model (ASM) code is to create a modeling and analysis tool that is easy to use, automates many of the initial design calculations, supports trade studies used in assessing alternate designs and yet is flexible enough to incorporate new technology concepts as they emerge. Hardware engineering parameters and beam dynamics are modeled at comparable levels of fidelity. Existing scaling models of accelerator subsystems were sued to produce a prototype of ASM (version 1.0) working within the Shell for Particle Accelerator Related Codes (SPARC) graphical user interface. A small user group has been testing and evaluating the prototype for about a year. Several enhancements and improvements are now being developed. The current version (1.1) of ASM is briefly described and an example of the modeling and analysis capabilities is illustrated.

  14. Power Control for Code Division Multiple Access Cellular Systems Bassam Hashem and Halim Yanikomeroglu

    E-Print Network [OSTI]

    Yanikomeroglu, Halim

    Power Control for Code Division Multiple Access Cellular Systems Bassam Hashem and Halim the interference results in a direct increase in the system capacity. Power control is the most important mobile velocities. Finally, we look at the power control algorithms from a system point of view. Power

  15. Accelerator System Model (ASM) user manual with physics and engineering model documentation. ASM version 1.0

    SciTech Connect (OSTI)

    NONE

    1993-07-01T23:59:59.000Z

    The Accelerator System Model (ASM) is a computer program developed to model proton radiofrequency accelerators and to carry out system level trade studies. The ASM FORTRAN subroutines are incorporated into an intuitive graphical user interface which provides for the {open_quotes}construction{close_quotes} of the accelerator in a window on the computer screen. The interface is based on the Shell for Particle Accelerator Related Codes (SPARC) software technology written for the Macintosh operating system in the C programming language. This User Manual describes the operation and use of the ASM application within the SPARC interface. The Appendix provides a detailed description of the physics and engineering models used in ASM. ASM Version 1.0 is joint project of G. H. Gillespie Associates, Inc. and the Accelerator Technology (AT) Division of the Los Alamos National Laboratory. Neither the ASM Version 1.0 software nor this ASM Documentation may be reproduced without the expressed written consent of both the Los Alamos National Laboratory and G. H. Gillespie Associates, Inc.

  16. Hardware Accelerator for MIMO Wireless Systems 

    E-Print Network [OSTI]

    Bhagawat, Pankaj

    2012-02-14T23:59:59.000Z

    potential that multiple antenna systems promise. Furthermore, in order to make judicious use of the available bandwidth, the baseband units have to dynamically adapt to different modes (modulation schemes, code rates etc) of operations. Flexibility and high...

  17. IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, VOL. 56, NO. 3, MAY 2007 1197 An Interleave-Division-Multiplexing MISO System

    E-Print Network [OSTI]

    Ping, Li

    -Division-Multiplexing MISO System With Partial CSI at Transmitter Chuxiang Li, Kai Li, Xiaodong Wang, Senior Member, IEEE-division-multiplexing (IDM) multiple-input­ single-output (MISO) system with partial channel state information (CSI the performance of such an IDM-MISO system. In particular, an SNR tracking method is proposed to calculate

  18. Boston University College of Engineering Division of Systems Engineering

    E-Print Network [OSTI]

    BE 760 Structural Bioinformatics ENG BE 767 Systems Biology ENG BE 777 Computational Genomics I B Area: A. Computational and Systems Biology Course A. Computational and Systems Biology ENG BE 505 Molecular Bioengineering I ENG BE 561 DNA

  19. Health-hazard evaluation report HETA 83-186-1628, Raytheon Missile Systems Division, Bristol, Tennessee

    SciTech Connect (OSTI)

    Salisbury, S.; Lucas, C.

    1985-09-01T23:59:59.000Z

    Environmental and breathing-zone samples were analyzed for cutting-oil mists, metal working fluids, and mineral spirits at Raytheon Missile Systems Divisions, Bristol, Tennessee in July, 1985. The evaluation was requested confidentially to investigate the occurrence of skin rashes in Machine-Department employees.

  20. Boston University College of Engineering Division of Systems Engineering

    E-Print Network [OSTI]

    Bioinformatics ENG BE 767 Systems Biology ENG BE 777 Computational Genomics I B. Control Systems ENG SE/EC/ME 501 on reverse ­ 8 credits Circle the Concentration Area: A. Computational and Systems Biology Course. Computational and Systems Biology ENG BE 505 Molecular Bioengineering I ENG BE 561 DNA and Protein Sequence

  1. Boston University College of Engineering Division of Systems Engineering

    E-Print Network [OSTI]

    /Semester/Grade ______________________________ Control Systems SE/ME 762 Nonlinear Systems and Control ME/MS 507 Process Modeling and Control ME 570 Theory SE/EC/ME 543 Sustainable Power Systems ME/MS 545 Electrochemistry of Fuel Cells and Batteries CAS Dynamic Programming and Stochastic Control Semester/Grade _________________ B. SE/EC 524 Optimization

  2. Boston University College of Engineering Division of Systems Engineering

    E-Print Network [OSTI]

    Process Modeling and Control ENG ME 560 Precision Machine Design and Instrumentation ENG ME 570 Robot and Environmental Systems CAS EC 513 Game Theory ENG SE/EC/ME 543 Sustainable Power Systems ENG ME/MS 545 Control of Business ENG EC/MS 573 Solar Energy Systems GRS GE 712 Regional Energy Modeling GRS EC 716 Game

  3. Boston University College of Engineering Division of Systems Engineering

    E-Print Network [OSTI]

    and Control ME/MS 507 Process Modeling and Control ME 570 Robot Motion Planning EC 702 Recursive Estimation/Semester/Grade ______________________________ Energy and Environmental Systems CAS EC 513 Game Theory SE/EC/ME 543 Sustainable Power Systems ME/MS 545 Control of Business EC/MS 573 Solar Energy Systems GRS GE 712 Regional Energy Modeling GRS EC 716 Game

  4. Quick setup of unit test for accelerator controls system

    SciTech Connect (OSTI)

    Fu, W.; D'Ottavio, T.; Gassner, D.; Nemesure, S.; Morris, J.

    2011-03-28T23:59:59.000Z

    Testing a single hardware unit of an accelerator control system often requires the setup of a program with graphical user interface. Developing a dedicated application for a specific hardware unit test could be time consuming and the application may become obsolete after the unit tests. This paper documents a methodology for quick design and setup of an interface focused on performing unit tests of accelerator equipment with minimum programming work. The method has three components. The first is a generic accelerator device object (ADO) manager which can be used to setup, store, and log testing controls parameters for any unit testing system. The second involves the design of a TAPE (Tool for Automated Procedure Execution) sequence file that specifies and implements all te testing and control logic. The sting third is the design of a PET (parameter editing tool) page that provides the unit tester with all the necessary control parameters required for testing. This approach has been used for testing the horizontal plane of the Stochastic Cooling Motion Control System at RHIC.

  5. Fusion & Materials for Nuclear Systems Division | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Group focuses on the development and application of advanced remote handling systems, tooling, and facilities for hazardous and inaccessible environments. The group has decades of...

  6. Boston University College of Engineering Division of Systems Engineering

    E-Print Network [OSTI]

    Systems Theory ENG ME/MS 507 Process Modeling and Control ENG ME 560 Precision Machine Design Sustainable Power Systems ENG ME/MS 545 Electrochemistry of Fuel Cells and Batteries CAS EC 571 Energy Programming and Stochastic Control ENG SE/ME 714 Advanced Stochastic Modeling and Simulation ENG SE/EC/ME 724

  7. Cryogenic system for the MYRRHA superconducting linear accelerator

    SciTech Connect (OSTI)

    Chevalier, Nicolas R.; Junquera, Tomas [Accelerators and Cryogenic Systems, 86, rue de Paris, 91400 Orsay (France); Thermeau, Jean-Pierre [Institut de Physique Nucléaire, Université Paris Sud, 91400 Orsay (France); Romão, Luis Medeiros; Vandeplassche, Dirk [SCK-CEN, Boeretang 200, 2400 Mol (Belgium)

    2014-01-29T23:59:59.000Z

    SCK?CEN, the Belgian Nuclear Research Centre, is designing MYRRHA, a flexible fast spectrum research reactor (80 MW{sub th}), conceived as an accelerator driven system (ADS), able to operate in sub-critical and critical modes. It contains a continuous-wave (CW) superconducting (SC) proton accelerator of 600 MeV, a spallation target and a multiplying core with MOX fuel, cooled by liquid lead-bismuth (Pb-Bi). From 17 MeV onward, the SC accelerator will consist of 48 ?=0.36 spoke-loaded cavities (352 MHz), 34 ?=0.47 elliptical cavities (704 MHz) and 60 ?=0.65 elliptical cavities (704 MHz). We present an analysis of the thermal loads and of the optimal operating temperature of the cryogenic system. In particular, the low operating frequency of spoke cavities makes their operation in CW mode possible both at 4.2 K or at 2 K. Our analysis outlines the main factors that determine at what temperature the spoke cavities should be operated. We then present different cryogenic fluid distribution schemes, important characteristics (storage, transfer line, etc.) and the main challenges offered by MYRRHA in terms of cryogenics.

  8. Feed forward rf control system of the accelerator test facility

    SciTech Connect (OSTI)

    Ben-Zvi, I.; Xie, Jialin; Zhang, Renshan.

    1991-01-01T23:59:59.000Z

    We report a scheme to control the amplitude and phase of the rf accelerating field in a klystron driven electron linac. The amplitude and phase distribution within the rf pulse can be controlled to follow specified functions to reduce the energy spread of the electron beam being accelerated. The scheme employs fast beam energy and phase detectors and voltage-controlled electronic attenuator and phase shifter in the amplifier chain. The control voltages of these devices are generated by arbitrary function generators. The function generators' outputs are calculated numerically using an algorithm which takes into consideration the desired target function and the deviation (due to load variations or system parameter drift) from the target function. Results of preliminary tests on producing flat rf power and phase pulses from a high power klystron indicate that amplitude variation of {plus minus}0.2% and phase variation of {plus minus}1{degree} can be readily achieved. 4 refs., 3 figs.

  9. Harrison Radiator Division's Energy Management, Reporting and Accounting System 

    E-Print Network [OSTI]

    Goubeaux, R. J.

    1986-01-01T23:59:59.000Z

    Energy management is essential for obtaining the lowest possible product manufacturing cost. Many systems have been created over the years to manage the energy used in manufacturing. However, for a variety of reasons, most of them never reached...

  10. RESEARCH ACCELERATOR DIVISION K. JONES, DIVISION DIRECTOR

    E-Print Network [OSTI]

    TECHNICIAN K. DANILOVA DATABASE PROG Controls Hardware P. W RIGHT TEAM LEADER J. STIGAL ENGINEER B. STONE

  11. EFFECTS OF POLLUTANTS ON BIOLOGICAL SYSTEMS. CHAPTER FROM THE ENERGY AND ENVIRONMENT DIVISION ANNUAL REPORT 1979

    E-Print Network [OSTI]

    Authors, Various

    2010-01-01T23:59:59.000Z

    to DOE Division of Geothermal Energy, January 30, 1980.in utilization of geothermal energy that adequate andthe DOE Division of Geothermal Energy. S. L. Phillips and E.

  12. Novel Approach to Linear Accelerator Superconducting Magnet System

    SciTech Connect (OSTI)

    Kashikhin, Vladimir; /Fermilab

    2011-11-28T23:59:59.000Z

    Superconducting Linear Accelerators include a superconducting magnet system for particle beam transportation that provides the beam focusing and steering. This system consists of a large number of quadrupole magnets and dipole correctors mounted inside or between cryomodules with SCRF cavities. Each magnet has current leads and powered from its own power supply. The paper proposes a novel approach to magnet powering based on using superconducting persistent current switches. A group of magnets is powered from the same power supply through the common, for the group of cryomodules, electrical bus and pair of current leads. Superconducting switches direct the current to the chosen magnet and close the circuit providing the magnet operation in a persistent current mode. Two persistent current switches were fabricated and tested. In the paper also presented the results of magnetic field simulations, decay time constants analysis, and a way of improving quadrupole magnetic center stability. Such approach substantially reduces the magnet system cost and increases the reliability.

  13. RELWAY: a process data highway system optimized for accelerators

    SciTech Connect (OSTI)

    Frankel, R.; Buxton, W,; Kohler, K.; Warkentien, R.; White, A.

    1981-01-01T23:59:59.000Z

    The command/control scheme for the Isabelle accelerator, specifically the process data highway are discussed. (GHT)J

  14. accelerator-driven systems programme: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    purpose of incinerating long-lived radionuclides in high- level waste 4 Thorium as a Fuel for Accelerator Driven Subcritical Electronuclear Systems CERN Preprints Summary:...

  15. accelerator-driven sub-critical system: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    purpose of incinerating long-lived radionuclides in high- level waste 4 Thorium as a Fuel for Accelerator Driven Subcritical Electronuclear Systems CERN Preprints Summary:...

  16. accelerator-driven system ads: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    experimental facilities 1 T. Takizuka; T. Sasa; K. Tsujimoto; H. Takano 5 Thorium as a Fuel for Accelerator Driven Subcritical Electronuclear Systems CERN Preprints Summary:...

  17. accelerator-driven systems fast: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    purpose of incinerating long-lived radionuclides in high- level waste 4 Thorium as a Fuel for Accelerator Driven Subcritical Electronuclear Systems CERN Preprints Summary:...

  18. accelerator-driven system prototype: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    purpose of incinerating long-lived radionuclides in high- level waste 4 Thorium as a Fuel for Accelerator Driven Subcritical Electronuclear Systems CERN Preprints Summary:...

  19. Modified Accelerated Cost-Recovery System (MACRS) + Bonus Depreciation (2008-2012)

    Broader source: Energy.gov [DOE]

    Under the federal Modified Accelerated Cost-Recovery System (MACRS), businesses may recover investments in certain property through depreciation deductions. The MACRS establishes a set of class...

  20. RFQ (radio-frequency quadrupole) accelerator tuning system

    DOE Patents [OSTI]

    Bolie, V.W.

    1988-04-12T23:59:59.000Z

    A cooling system is provided for maintaining a preselected operating temperature in a device, which may be an RFQ accelerator, having a variable heat removal requirement, by circulating a cooling fluid through a cooling system remote from the device. Internal sensors in the device enable an estimated error signal to be generated from parameters which are indicative of the heat removal requirement from the device. Sensors are provided at predetermined locations in the cooling system for outputting operational temperature signals. Analog and digital computers define a control signal functionally related to the temperature signals and the estimated error signal, where the control signal is defined effective to return the device to the preselected operating temperature in a stable manner. The cooling system includes a first heat sink responsive to a first portion of the control signal to remove heat from a major portion of the circulating fluid. A second heat sink is responsive to a second portion of the control to remove heat from a minor portion of the circulating fluid. The cooled major and minor portions of the circulating fluid are mixed in responsive to a mixing portion of the control signal, which is effective to proportion the major and minor portions of the circulating fluid to establish a mixed fluid temperature which is effective to define the preselected operating temperature for the remote device. 3 figs., 2 tabs.

  1. A Framework for a General Purpose Intelligent Control System for Particle Accelerators. Phase II Final Report

    SciTech Connect (OSTI)

    Dr. Robert Westervelt; Dr. William Klein; Dr. Michael Kroupa; Eric Olsson; Rick Rothrock

    1999-06-28T23:59:59.000Z

    Vista Control Systems, Inc. has developed a portable system for intelligent accelerator control. The design is general in scope and is thus configurable to a wide range of accelerator facilities and control problems. The control system employs a multi-layer organization in which knowledge-based decision making is used to dynamically configure lower level optimization and control algorithms.

  2. THE POWER SUPPLY SYSTEM FOR THE ACCELERATING COLUMN OF THE 2 MEV ELECTRON COOLER FOR COSY

    E-Print Network [OSTI]

    Kozak, Victor R.

    a high-energy electron beam. The power supply for the accelerating column of the electron cooling systemTHE POWER SUPPLY SYSTEM FOR THE ACCELERATING COLUMN OF THE 2 MEV ELECTRON COOLER FOR COSY D controlled voltage source for 60 kV, 1mA and an additional supply for the solenoids of the magnetic system

  3. Systems and methods for cylindrical hall thrusters with independently controllable ionization and acceleration stages

    DOE Patents [OSTI]

    Diamant, Kevin David; Raitses, Yevgeny; Fisch, Nathaniel Joseph

    2014-05-13T23:59:59.000Z

    Systems and methods may be provided for cylindrical Hall thrusters with independently controllable ionization and acceleration stages. The systems and methods may include a cylindrical channel having a center axial direction, a gas inlet for directing ionizable gas to an ionization section of the cylindrical channel, an ionization device that ionizes at least a portion of the ionizable gas within the ionization section to generate ionized gas, and an acceleration device distinct from the ionization device. The acceleration device may provide an axial electric field for an acceleration section of the cylindrical channel to accelerate the ionized gas through the acceleration section, where the axial electric field has an axial direction in relation to the center axial direction. The ionization section and the acceleration section of the cylindrical channel may be substantially non-overlapping.

  4. Transmutation of nuclear waste in accelerator-driven systems

    E-Print Network [OSTI]

    Herrera-Martínez, A

    2004-01-01T23:59:59.000Z

    Today more than ever energy is not only a cornerstone of human development, but also a key to the environmental sustainability of economic activity. In this context, the role of nuclear power may be emphasized in the years to come. Nevertheless, the problems of nuclear waste, safety and proliferation still remain to be solved. It is believed that the use of accelerator-driven systems (ADSs) for nuclear waste transmutation and energy production would address these problems in a simple, clean and economically viable, and therefore sustainable, manner. This thesis covers the major nuclear physics aspects of ADSs, in particular the spallation process and the core neutronics specific to this type of systems. The need for accurate nuclear data is described, together with a detailed analysis of the specific isotopes and energy ranges in which this data needs to be improved and the impact of their uncertainty. Preliminary experimental results for some of these isotopes, produced by the Neutron Time-of-Flight (n_TOF) ...

  5. Feasibility Study of Accelerator Driven System Proposed by JAEA

    SciTech Connect (OSTI)

    Sugawara, Takanori; Nishihara, Kenji; Tsujimoto, Kazufumi; Iwanaga, Kohei; Kurata, Yuji; Sasa, Toshinobu; Oigawa, Hiroyuki [Japan Atomic Energy Agency: 2-4 Shirakata-shirane Tokai-Mura, Ibaraki, 319-1195 (Japan)

    2007-07-01T23:59:59.000Z

    Accelerator Driven System (ADS) has been studied to transmute minor actinides (MA) discharged from spent fuel of commercial nuclear power plants. In Japan Atomic Energy Agency (JAEA), various R and D for an 800 MWt, lead bismuth eutectic (LBE) cooled ADS have been performed. The feasibility for the ADS is discussed in the present study in terms of the neutronics design, the safety analysis and the design of the beam window. In the neutronics design, the maximum temperature at the surface of the fuel pin was decreased from 578 deg. C to 498 deg. C by the adjustment of the ZrN inert matrix ratio for four zones. In the safety analysis, it was confirmed that there was very little possibility of core disruptive accidents at unprotected accidents in the ADS proposed by JAEA. For the design of the beam window, the parametric survey for the buckling failure was performed to discuss the methods to increase the margin for the buckling pressure. (authors)

  6. Disposition of Nuclear Waste Using Subcritical Accelerator-Driven Systems

    SciTech Connect (OSTI)

    Doolen, G.D.; Venneri, F.; Li, N.; Williamson, M.A.; Houts, M.; Lawrence, G.

    1998-06-27T23:59:59.000Z

    ATW destroys virtually all the plutonium and higher actinides without reprocessing the spent fuel in a way that could lead to weapons material diversion. An ATW facility consists of three major elements: (1) a high-power proton linear accelerator; (2) a pyrochemical spent fuel treatment i waste cleanup system; (3) a liquid lead-bismuth cooled burner that produces and utilizes an intense source-driven neutron flux for transmutation in a heterogeneous (solid fuel) core. The concept is the result of many years of development at LANL as well as other major international research centers. Once demonstrated and developed, ATW could be an essential part of a global non-proliferation strategy for countries that could build up large quantities of plutonium from their commercial reactor waste. ATW technology, initially proposed in the US, has received wide and rapidly increasing attention abroad, especially in Europe and the Far East with major programs now being planned, organized and tided. Substantial convergence presently exists on the technology choices among the programs, opening the possibility of a strong and effective international collaboration on the phased development of the ATW technology.

  7. Vacuum Systems Consensus Guideline for Department of Energy Accelerator Laboratories

    SciTech Connect (OSTI)

    Casey,R.; Haas, E.; Hseuh, H-C.; Kane, S.; Lessard, E.; Sharma, S.; Collins, J.; Toter, W. F.; Olis, D. R.; Pushka, D. R.; Ladd, P.; Jobe, R. K.

    2008-09-09T23:59:59.000Z

    Vacuum vessels, including evacuated chambers and insulated jacketed dewars, can pose a potential hazard to equipment and personnel from collapse, rupture due to back-fill pressurization, or implosion due to vacuum window failure. It is therefore important to design and operate vacuum systems in accordance with applicable and sound engineering principles. 10 CFR 851 defines requirements for pressure systems that also apply to vacuum vessels subject to back-fill pressurization. Such vacuum vessels are potentially subject to the requirements of the American Society of Mechanical Engineers (ASME) Pressure Vessel Code Section VIII (hereafter referred to as the 'Code'). However, the scope of the Code excludes vessels with internal or external operating pressure that do not exceed 15 pounds per square inch gauge (psig). Therefore, the requirements of the Code do not apply to vacuum systems provided that adequate pressure relief assures that the maximum internal pressure within the vacuum vessel is limited to less than 15 psig from all credible pressure sources, including failure scenarios. Vacuum vessels that cannot be protected from pressurization exceeding 15 psig are subject to the requirements of the Code. 10 CFR 851, Appendix A, Part 4, Pressure Safety, Section C addresses vacuum system requirements for such cases as follows: (c) When national consensus codes are not applicable (because of pressure range, vessel geometry, use of special materials, etc.), contractors must implement measures to provide equivalent protection and ensure a level of safety greater than or equal to the level of protection afforded by the ASME or applicable state or local code. Measures must include the following: (1) Design drawings, sketches, and calculations must be reviewed and approved by a qualified independent design professional (i.e., professional engineer). Documented organizational peer review is acceptable. (2) Qualified personnel must be used to perform examinations and inspections of materials, in-process fabrications, non-destructive tests, and acceptance test. (3) Documentation, traceability, and accountability must be maintained for each unique pressure vessel or system, including descriptions of design, pressure conditions, testing, inspection, operation, repair, and maintenance. The purpose of this guideline is to establish a set of expectations and recommendations which will satisfy the requirements for vacuum vessels in general and particularly when an equivalent level of safety as required by 10 CFR 851 must be provided. It should be noted that these guidelines are not binding on DOE Accelerator Laboratories and that other approaches may be equally acceptable in addressing the Part 851 requirements.

  8. accelerator system string: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    are being used for. Initially introduced to handle equipment builders' data, commercial DBMS are now being used in almost all areas of accelerators from on-line control to...

  9. A Software System for Modeling and Controlling Accelerator Physics Parameters at the Advanced Light Source

    E-Print Network [OSTI]

    Schachinger, L.C.

    2011-01-01T23:59:59.000Z

    and Controlling Accelerator Physics Parameters at theLight Source for accelerator physics studies and accelerator

  10. Designing Accelerator-Based Distributed Systems for High Performance M. Mustafa Rafique, Ali R. Butt

    E-Print Network [OSTI]

    Butt, Ali R.

    ), yielding highly power-efficient and cost-efficient designs, with per- formance exceeding 100 Gflops [1Designing Accelerator-Based Distributed Systems for High Performance M. Mustafa Rafique, Ali R general- purpose cores (e.g. x86, PowerPC) and computational accelerators (e.g. SIMD processors and GPUs

  11. AT2 DS II - Accelerator System Design (Part II) - CCC Video Conference

    ScienceCinema (OSTI)

    None

    2011-10-06T23:59:59.000Z

    Discussion Session - Accelerator System Design (Part II) Tutors: C. Darve, J. Weisend II, Ph. Lebrun, A. Dabrowski, U. Raich Video Conference with the CERN Control Center. Experts in the field of Accelerator science will be available to answer the students questions. This session will link the CCC and SA (using Codec VC).

  12. AT2 DS II - Accelerator System Design (Part II) - CCC Video Conference

    SciTech Connect (OSTI)

    None

    2010-12-17T23:59:59.000Z

    Discussion Session - Accelerator System Design (Part II) Tutors: C. Darve, J. Weisend II, Ph. Lebrun, A. Dabrowski, U. Raich Video Conference with the CERN Control Center. Experts in the field of Accelerator science will be available to answer the students questions. This session will link the CCC and SA (using Codec VC).

  13. Application of JLab 12GeV helium refrigeration system for the FRIB accelerator at MSU

    SciTech Connect (OSTI)

    Ganni, V.; Knudsen, P.; Arenius, D. [Thomas Jefferson National Accelerator Facility, Newport News, VA 23606 (United States); Casagrande, F. [MSU-FRIB, East Lansing, MI 48824 (United States)

    2014-01-29T23:59:59.000Z

    The planned approach to have a turnkey helium refrigeration system for the MSU-FRIB accelerator system, encompassing the design, fabrication, installation and commissioning of the 4.5-K refrigerator cold box(es), cold compression system, warm compression system, gas management, oil removal and utility/ancillary systems, was found to be cost prohibitive. Following JLab’s suggestion, MSU-FRIB accelerator management made a formal request to evaluate the applicability of the recently designed 12GeV JLab cryogenic system for this application. The following paper will outline the findings and the planned approach for the FRIB helium refrigeration system.

  14. Application of JLab 12GeV helium refrigeration system for the FRIB accelerator at MSU

    SciTech Connect (OSTI)

    Ganni, Venkatarao [JLAB; Knudsen, Peter N. [JLAB; Arenius, Dana M. [JLAB; Casagrande, Fabio [Michigan State University

    2014-01-01T23:59:59.000Z

    The planned approach to have a turnkey helium refrigeration system for the MSU-FRIB accelerator system, encompassing the design, fabrication, installation and commissioning of the 4.5-K refrigerator cold box(es), cold compression system, warm compression system, gas management, oil removal and utility/ancillary systems, was found to be cost prohibitive. Following JLab’s suggestion, MSU-FRIB accelerator management made a formal request to evaluate the applicability of the recently designed 12GeV JLab cryogenic system for this application. The following paper will outline the findings and the planned approach for the FRIB helium refrigeration system.

  15. accelerator-driven transmutation system: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    plan is considered Yu Qi; Ouyang Hua Fu; Xu Tao Guang 2001-01-01 7 Thorium as a Fuel for Accelerator Driven Subcritical Electronuclear Systems CERN Preprints Summary:...

  16. accelerator-driven subcritical systems: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Thorium as a Fuel for Accelerator Driven Subcritical Electronuclear Systems CERN Preprints Summary:...

  17. accelerator-driven transmutation systems: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    plan is considered Yu Qi; Ouyang Hua Fu; Xu Tao Guang 2001-01-01 7 Thorium as a Fuel for Accelerator Driven Subcritical Electronuclear Systems CERN Preprints Summary:...

  18. Development of repetitive railgun pellet accelerator and steady-state pellet supply system

    SciTech Connect (OSTI)

    Oda, Y.; Onozuka, M.; Azuma, K. [Mitsubishi Heavy Industries, Ltd., Kobe (Japan); Kasai, S.; Hasegawa, K. [Japan Atomic Energy Research Inst., Naka (Japan)

    1995-12-31T23:59:59.000Z

    A railgun system for repetitive high-speed pellet acceleration and steady-state pellet supply system has been developed and investigated. Using a 2m-long railgun system, the hydrogen pellet was accelerated to 2.6km/sec by the supplied energy of 1.7kJ. It is expected that the hydrogen pellet can be accelerated to 3km/sec using the present pneumatic pellet accelerator and a 2m-long augment railgun. Screw-driven hydrogen-isotope filament extruding system has been fabricated and will be tested to examine its applicability to the steady-state extrusion of the solid hydrogen-isotope filament.

  19. Direct measurement of the cosmic acceleration by 21cm absorption systems

    E-Print Network [OSTI]

    Yu, Hao-Ran; Pen, Ue-Li

    2013-01-01T23:59:59.000Z

    So far there is only indirect evidence that the universe is undergoing an accelerated expansion. The evidence for cosmic acceleration is based on the observation of different objects at different distances, and requires invoking the Copernican cosmological principle, and Einstein's equations of motion. We examine the direct observability using recession velocity drifts (Sandage-Loeb effect) of 21cm hydrogen absorption systems in upcoming radio surveys. This measures the change in velocity of the {\\it same} objects separate by a time interval and is a model-independent measure of acceleration. We forecast that for a CHIME-like survey with a decade time span, we can detect the acceleration of a $\\Lambda$CDM universe with $\\sim 6\\sigma$ confidence. This acceleration test requires modest data analysis and storage changes from the normal processing, and cannot be recovered retroactively.

  20. Advanced Klystrons for High Efficiency Accelerator Systems - Final Report

    SciTech Connect (OSTI)

    Read, Michael; Ives, Robert Lawrence

    2014-03-26T23:59:59.000Z

    This program explored tailoring of RF pulses used to drive accelerator cavities. Simulations indicated that properly shaping the pulse risetime to match accelerator cavity characteristics reduced reflected power and increased total efficiency. Tailoring the pulse requires a high power, gridded, klystron to shape the risetime while also controlling the beam current. The Phase I program generated a preliminary design of a gridded electron gun for a klystron producing 5-10 MW of RF power. This required design of a segmented cathode using Controlled Porosity Reservoir cathodes to limit power deposition on the grid. The program was successful in computationally designing a gun producing a high quality electron beam with grid control. Additional analysis of pulse tailoring indicated that technique would only be useful for cavity drive pulses that were less than approximately 2-3 times the risetime. Otherwise, the efficiency gained during the risetime of the pulse became insignificant when considering the efficiency over the entire pulse. Consequently, it was determined that a Phase II program would not provide sufficient return to justify the cost. Never the less, other applications for a high power gridded gun are currently being pursued. This klystron, for example, would facilitate development inverse Comptom x-ray sources by providing a high repetition rate (10 -100 kHz) RF source.

  1. Disposition of nuclear waste using subcritical accelerator-driven systems

    SciTech Connect (OSTI)

    Venneri, F.; Li, N.; Williamson, M.; Houts, M.; Lawrence, G.

    1998-12-31T23:59:59.000Z

    Spent fuel from nuclear power plants contains large quantities of Pu, other actinides, and fission products (FP). This creates challenges for permanent disposal because of the long half-lives of some isotopes and the potential for diversion of the fissile material. Two issues of concern for the US repository concept are: (1) long-term radiological risk peaking tens-of-thousands of years in the future; and (2) short-term thermal loading (decay heat) that limits capacity. An accelerator-driven neutron source can destroy actinides through fission, and can convert long-lived fission products to shorter-lived or stable isotopes. Studies over the past decade have established that accelerator transmutation of waste (ATW) can have a major beneficial impact on the nuclear waste problem. Specifically, the ATW concept the authors are evaluating: (1) destroys over 99.9% of the actinides; (2) destroys over 99.9% of the Tc and I; (3) separates Sr-90 and Cs-137; (4) separates uranium from the spent fuel; (5) produces electric power.

  2. accelerator control system: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    control system is largely based on standard industrial hardware and software components. SIEMENS Simatic S7-300 programmable logic controllers have been used as equipment...

  3. accelerator controls system: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    control system is largely based on standard industrial hardware and software components. SIEMENS Simatic S7-300 programmable logic controllers have been used as equipment...

  4. accelerator control systems: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    control system is largely based on standard industrial hardware and software components. SIEMENS Simatic S7-300 programmable logic controllers have been used as equipment...

  5. HIGH-POWER PRECISION CURRENT SUPPLY IST2-1000M FOR ELEMENTS OF MAGNETIC SYSTEMS OF ACCELERATORS AND

    E-Print Network [OSTI]

    Kozak, Victor R.

    HIGH-POWER PRECISION CURRENT SUPPLY IST2-1000M FOR ELEMENTS OF MAGNETIC SYSTEMS OF ACCELERATORS. These supplies are intended to power magnetic systems of accelerators, requiring high stability and low ripples current at non-inductive load % 0,02 Rate of current raise without disturbing operation of the system

  6. Protecting Accelerator Control Systems in the Face of Sophisticated Cyber Attacks

    SciTech Connect (OSTI)

    Hartman, Steven M [ORNL] [ORNL

    2012-01-01T23:59:59.000Z

    Cyber security for industrial control systems has received significant attention in the past two years. The news coverage of the Stuxnet attack, believed to be targeted at the control system for a uranium enrichment plant, brought the issue to the attention of news media and policy makers. This has led to increased scrutiny of control systems for critical infrastructure such as power generation and distribution, and industrial systems such as chemical plants and petroleum refineries. The past two years have also seen targeted network attacks aimed at corporate and government entities including US Department of Energy National Laboratories. Both of these developments have potential repercussions for the control systems of particle accelerators. The need to balance risks from potential attacks with the operational needs of an accelerator present a unique challenge for the system architecture and access model.

  7. Phase and amplitude control system for Stanford Linear Accelerator

    SciTech Connect (OSTI)

    Yoo, S.J.

    1983-09-26T23:59:59.000Z

    The computer controlled phase and amplitude detection system measures the instantaneous phase and amplitude of a 1 micro-second 2856 MHz rf pulse at a 180 Hz rate. This will be used for phase feedback control, and also for phase and amplitude jitter measurement. The program, which was originally written by John Fox and Keith Jobe, has been modified to improve the function of the system. The software algorithms used in the measurement are described, as is the performance of the prototype phase and amplitude detector system.

  8. Asynchronous data change notification between database server and accelerator controls system

    SciTech Connect (OSTI)

    Fu, W.; Morris, J.; Nemesure, S.

    2011-10-10T23:59:59.000Z

    Database data change notification (DCN) is a commonly used feature. Not all database management systems (DBMS) provide an explicit DCN mechanism. Even for those DBMS's which support DCN (such as Oracle and MS SQL server), some server side and/or client side programming may be required to make the DCN system work. This makes the setup of DCN between database server and interested clients tedious and time consuming. In accelerator control systems, there are many well established software client/server architectures (such as CDEV, EPICS, and ADO) that can be used to implement data reflection servers that transfer data asynchronously to any client using the standard SET/GET API. This paper describes a method for using such a data reflection server to set up asynchronous DCN (ADCN) between a DBMS and clients. This method works well for all DBMS systems which provide database trigger functionality. Asynchronous data change notification (ADCN) between database server and clients can be realized by combining the use of a database trigger mechanism, which is supported by major DBMS systems, with server processes that use client/server software architectures that are familiar in the accelerator controls community (such as EPICS, CDEV or ADO). This approach makes the ADCN system easy to set up and integrate into an accelerator controls system. Several ADCN systems have been set up and used in the RHIC-AGS controls system.

  9. Collider-Accelerator Department/SNSRing Systems BROOKHAVENNATIONALLABORATORY

    E-Print Network [OSTI]

    shall be installed by Brookhaven National Laboratory (BNL) as part of a large magnet power system ANSI/IEEE C57 Distribution, Power and Regulating Transformers NFPA70 National ElectricCode IEEE 5ScienceAssociates Upton, New York 11973 SPEC. SNS-OO9 December 14, 1999 SDecification for Iuiection Bumo Power Suoolies "T

  10. Data acquisition system at the RIKEN accelerator facility

    SciTech Connect (OSTI)

    Ichihara, T.; Inamura, T.; Wada, T.; Ishihara, M. (RIKEN Accelerator facility 2-1, Hirosawa, Wako, 351-01 (JP))

    1989-10-01T23:59:59.000Z

    This paper describes data acquisition system using J11 CPU (Starburst 2180 ACC) and Micro VAX II. Each event is processed by J11 CPU. Buffered data is transferred to Micro VAX II through Kinetic parallel bus. The executable image on J11 is builded on Micro VAX II using VAX/RSX and down-line loaded via CAMAC dataway.

  11. ACCELERATOR TEST FACILITY

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LABORATORY PHYSICS DEPARTMENT Effective: 04012004 Page 1 of 2 Subject: Accelerator Test Facility - Linear Accelerator General Systems Guide Prepared by: Michael Zarcone...

  12. Accelerating Acceptance of Fuel Cell Backup Power Systems - Final Report

    SciTech Connect (OSTI)

    Petrecky, James; Ashley, Christopher

    2014-07-21T23:59:59.000Z

    Since 2001, Plug Power has installed more than 800 stationary fuel cell systems worldwide. Plug Power’s prime power systems have produced approximately 6.5 million kilowatt hours of electricity and have accumulated more than 2.5 million operating hours. Intermittent, or backup, power products have been deployed with telecommunications carriers and government and utility customers in North and South America, Europe, the United Kingdom, Japan and South Africa. Some of the largest material handling operations in North America are currently using the company’s motive power units in fuel cell-powered forklifts for their warehouses, distribution centers and manufacturing facilities. The low-temperature GenSys fuel cell system provides remote, off-grid and primary power where grid power is unreliable or nonexistent. Built reliable and designed rugged, low- temperature GenSys delivers continuous or backup power through even the most extreme conditions. Coupled with high-efficiency ratings, low-temperature GenSys reduces operating costs making it an economical solution for prime power requirements. Currently, field trials at telecommunication and industrial sites across the globe are proving the advantages of fuel cells—lower maintenance, fuel costs and emissions, as well as longer life—compared with traditional internal combustion engines.

  13. A proposed second harmonic acceleration system for the Intense Pulsed Neutron Source Rapid Cycling Synchrotron

    SciTech Connect (OSTI)

    Norem, J.; Brandeberry, F.; Rauchas, A.

    1983-08-01T23:59:59.000Z

    The Rapid Cycling Synchrotron (RCS) of the Intense Pulsed Neutron Source (IPNS) operating at Argonne National Laboratory is presently producing intensities of 2-2.5 x 10/sup 12/ protons per pulse (ppp) with the addition of a new ion source. This intensity is close to the space charge limit of the machine, estimated at about 3 x 10/sup 12/ ppp, depending somewhat on the available aperture. With the present good performance in mind, accelerator improvements are being directed at increasing beam intensities for neutron science, lowering acceleration losses to minimize activation, and gaining better control of the beam so that losses can be made to occur when and where they can be most easily controlled. On the basis of preliminary measurements, the authors are now proposing a third cavity for the RF system which would provide control of the longitudinal bunch shape during the cycle which would permit raising the effective space charge limit of the accelerator and reducing losses.

  14. Exposure of Polymeric Glazing Materials Using NREL's Ultra-Accelerated Weathering System (UAWS)

    SciTech Connect (OSTI)

    Bingham, C.; Jorgensen, G.; Wylie, A.

    2010-01-01T23:59:59.000Z

    NREL's Ultra-Accelerated Weathering System (UAWS) selectively reflects and concentrates natural sunlight ultraviolet irradiance below 475 nm onto exposed samples to provide accelerated weathering of materials while keeping samples within realistic temperature limits. This paper will explain the design and implementation of the UAWS which allow it to simulate the effect of years of weathering in weeks of exposure. Exposure chamber design and instrumentation will be discussed for both a prototype UAWS used to test glazing samples as well as a commercial version of UAWS. Candidate polymeric glazing materials have been subjected to accelerated exposure testing at a light intensity level of up to 50 UV suns for an equivalent outdoor exposure in Miami, FL exceeding 15 years. Samples include an impact modified acrylic, fiberglass, and polycarbonate having several thin UV-screening coatings. Concurrent exposure is carried out for identical sample sets at two different temperatures to allow thermal effects to be quantified along with resistance to UV.

  15. G-NetMon: a GPU-accelerated network performance monitoring system

    SciTech Connect (OSTI)

    Wu, Wenji; DeMar, Phil; Holmgren, Don; Singh, Amitoj; /Fermilab

    2011-06-01T23:59:59.000Z

    At Fermilab, we have prototyped a GPU-accelerated network performance monitoring system, called G-NetMon, to support large-scale scientific collaborations. In this work, we explore new opportunities in network traffic monitoring and analysis with GPUs. Our system exploits the data parallelism that exists within network flow data to provide fast analysis of bulk data movement between Fermilab and collaboration sites. Experiments demonstrate that our G-NetMon can rapidly detect sub-optimal bulk data movements.

  16. Israel Careers ACCELERATE YOUR FUTURE

    E-Print Network [OSTI]

    Rimon, Elon

    Lithography Control products within the product lifecycle process including defining requirements, settingIsrael Careers ACCELERATE YOUR FUTURE Product Marketing Manager Job Description: Product Marketing Manager at the Optical Metrology Division is responsible for product strategy and customer interface

  17. Centrifugal accelerator, system and method for removing unwanted layers from a surface

    DOE Patents [OSTI]

    Foster, Christopher A. (Clinton, TN); Fisher, Paul W. (Heiskell, TN)

    1995-01-01T23:59:59.000Z

    A cryoblasting process having a centrifugal accelerator for accelerating frozen pellets of argon or carbon dioxide toward a target area utilizes an accelerator throw wheel designed to induce, during operation, the creation of a low-friction gas bearing within internal passages of the wheel which would otherwise retard acceleration of the pellets as they move through the passages. An associated system and method for removing paint from a surface with cryoblasting techniques involves the treating, such as a preheating, of the painted surface to soften the paint prior to the impacting of frozen pellets thereagainst to increase the rate of paint removal. A system and method for producing large quantities of frozen pellets from a liquid material, such as liquid argon or carbon dioxide, for use in a cryoblasting process utilizes a chamber into which the liquid material is introduced in the form of a jet which disintegrates into droplets. A non-condensible gas, such as inert helium or air, is injected into the chamber at a controlled rate so that the droplets freeze into bodies of relatively high density.

  18. PREPRINT MCS-P446-0694, MATHEMATICS AND COMPUTER SCIENCE DIVISION, ARGONNE NATI* STABILITY OF AUGMENTED SYSTEM FACTORIZATIONS IN

    E-Print Network [OSTI]

    Wright, Steve

    PREPRINT MCS-P446-0694, MATHEMATICS AND COMPUTER SCIENCE DIVISION, ARGONNE NATI* *ONAL LABORATORY Science Division, Argonne National Laboratory, 970* *0 South Cass Avenue, Argonne, IL 60439. This work

  19. 2011_Accelerator_Detector_RD_PI_Meeting_files | U.S. DOE Office...

    Office of Science (SC) Website

    Principal Investigators' Meetings 2011 Accelerator Detector RD PI Meeting files Scientific User Facilities (SUF) Division SUF Home About User Facilities Projects Accelerator &...

  20. The accelerator automation application toolkit workshop presentations

    SciTech Connect (OSTI)

    Howell, J.A.; Bjorklund, E.A.; Clout, P.N.; Dalesio, L.R.; Kozubal, A.J.; Mottershead, C.T.; Rothrock, R.B.; Schaller, S.C.; Stuewe, R.B.; Westervelt, R.T.

    1988-01-01T23:59:59.000Z

    Over the past 18 months on the GTA project at Los Alamos, we have been developing tools for building control systems for accelerators. The first tool developed has already demonstrated greatly reduced requirements for conventional computer programming in applying control systems to an accelerator. Even in the early stages, this work has received considerable attention and the system is currently being investigated or used at several other institutes. Further tools are either in the conceptual design, design, or implementation phase. Over the same period, a group at CERN has been developing the ideas and design for a generic software kit for the application of a control system to accelerators. The CERN software kit also addresses the technical management and documentation aspects of control systems. The purpose of the AT Division effort and the CERN kit is to greatly simplify the implementation and lifetime maintenance of an accelerator control system. Experience has shown that accelerator control systems are also applicable to other experimental physics machines. The purpose of the workshop was to explore these ideas and developments as well as other relevant developments in the field, to verify the viability of the concepts, and to develop further the written specifications for some of the components of such a toolkit. We had draft specifications prepared prior to the workshop. 21 figs.

  1. Accelerator Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWP TWP Related LinksATHENA couldAbout BudgetAboutNewsOSTI, USAccelerator

  2. A three dimensional simulation of a thermal experiment conducted on an accelerator driven system target model concept

    E-Print Network [OSTI]

    Pratt, Preston Persley

    2003-01-01T23:59:59.000Z

    Accelerator transmutation of waste (ATW) is a new concept that would destroy actinides in spent fuel and produce electrical power. This study explores the possibility of modeling the thermo-hydraulics of this system with computational fluid...

  3. Superconducting Magnet Division

    E-Print Network [OSTI]

    Ohta, Shigemi

    Superconducting Magnet Division MAGNETIC DESIGN OF E-LENS SOLENOID AND CORRECTOR SYSTEM FOR RHIC* R.6 A gun collectors gun Combined Horizontal and Vertical Corrector Design Both types of dipole correctors. Gupta, M. Anerella, W. Fischer, G. Ganetis, X. Gu, A. Ghosh, A. Jain, P. Kovach, A. Marone, S. Plate, A

  4. Case Files of the California Poison Control System, San Francisco Division: Blue Thunder Ingestion: Methanol, Nitromethane, and Elevated Creatinine

    E-Print Network [OSTI]

    Ngo, Adeline Su-Yin; Rowley, Freda; Olson, Kent R.

    2010-01-01T23:59:59.000Z

    San Francisco Division: Blue Thunder Ingestion: Methanol,by consuming vodka and “ Blue Thunder”, a fuel for radio-controlled car fuels such as “Blue Thunder”, the primary

  5. Proposed second harmonic acceleration system for the intense pulsed neutron source rapid cycling synchrotron

    SciTech Connect (OSTI)

    Norem, J.; Brandeberry, F.; Rauchas, A.

    1983-01-01T23:59:59.000Z

    The Rapid Cycling Synchrotron (RCS) of the Intense Pulsed Neutron Source (IPNS) operating at Argonne National Laboratory is presently producing intensities of 2 to 2.5 x 10/sup 12/ protons per pulse (ppp) with the addition of a new ion source. This intensity is close to the space charge limit of the machine, estimated at approx.3 x 10/sup 12/ ppp, depending somewhat on the available aperture. With the present good performance in mind, accelerator improvements are being directed at: (1) increasing beam intensities for neutron science; (2) lowering acceleration losses to minimize activation; and (3) gaining better control of the beam so that losses can be made to occur when and where they can be most easily controlled. On the basis of preliminary measurements, we are now proposing a third cavity for the RF systems which would provide control of the longitudinal bunch shape during the cycle which would permit raising the effective space charge limit of the accelerator and reducing losses.

  6. Models of f(R) Cosmic Acceleration that Evade Solar-System Tests

    E-Print Network [OSTI]

    Wayne Hu; Ignacy Sawicki

    2007-05-08T23:59:59.000Z

    We study a class of metric-variation f(R) models that accelerates the expansion without a cosmological constant and satisfies both cosmological and solar-system tests in the small-field limit of the parameter space. Solar-system tests alone place only weak bounds on these models, since the additional scalar degree of freedom is locked to the high-curvature general-relativistic prediction across more than 25 orders of magnitude in density, out through the solar corona. This agreement requires that the galactic halo be of sufficient extent to maintain the galaxy at high curvature in the presence of the low-curvature cosmological background. If the galactic halo and local environment in f(R) models do not have substantially deeper potentials than expected in LCDM, then cosmological field amplitudes |f_R| > 10^{-6} will cause the galactic interior to evolve to low curvature during the acceleration epoch. Viability of large-deviation models therefore rests on the structure and evolution of the galactic halo, requiring cosmological simulations of f(R) models, and not directly on solar-system tests. Even small deviations that conservatively satisfy both galactic and solar-system constraints can still be tested by future, percent-level measurements of the linear power spectrum, while they remain undetectable to cosmological-distance measures. Although we illustrate these effects in a specific class of models, the requirements on f(R) are phrased in a nearly model-independent manner.

  7. BENDIX SYSTEMS DIVISION ANN A R8 oR, M1CH NO. REV.NO. Solar Wind Programming for

    E-Print Network [OSTI]

    Rathbun, Julie A.

    experiment program decommutates its own data, organizes it, processes it, and prepares it for output. Specifically, for Solar Wind, there is provision (using sense switches) for allowing or inhibiting the outputBENDIX SYSTEMS DIVISION ANN A R8 oR, M1CH NO. REV.NO. Solar Wind Programming for I I DPS 2000

  8. Cavity beam position monitor system for the Accelerator Test Facility 2

    SciTech Connect (OSTI)

    Kim, Y.I.; /Kyungpook Natl. U.; Ainsworth, R.; /Royal Holloway, U. of London; Aryshev, A.; /KEK, Tsukuba; Boogert, S.T.; Boorman, G.; /Royal Holloway, U. of London; Frisch, J.; /SLAC; Heo, A.; /Kyungpook Natl. U.; Honda, Y.; /KEK, Tsukuba; Hwang, W.H.; Huang, J.Y.; /Pohang Accelerator Lab.; Kim, E-S.; /Kyungpook Natl. U. /Pohang Accelerator Lab. /Royal Holloway, U. of London /KEK, Tsukuba

    2012-04-02T23:59:59.000Z

    The Accelerator Test Facility 2 (ATF2) is a scaled demonstrator system for final focus beam lines of linear high energy colliders. This paper describes the high resolution cavity beam position monitor (BPM) system, which is a part of the ATF2 diagnostics. Two types of cavity BPMs are used, C-band operating at 6.423 GHz, and S-band at 2.888 GHz with an increased beam aperture. The cavities, electronics, and digital processing are described. The resolution of the C-band system with attenuators was determined to be approximately 250 nm and 1 {mu}m for the S-band system. Without attenuation the best recorded C-band cavity resolution was 27 nm.

  9. Division of Finance Division of Finance Alignment

    E-Print Network [OSTI]

    Hayden, Nancy J.

    Division of Finance Division of Finance Alignment September 11, 2014 1 #12;Division of Finance of Finance Goal of the DF Alignment Project The internal and external alignment of the Division of Finance of Finance The Process We Followed 17 Meetings17 Meetings 120+ Pages of Data 103 Themes 12 Meta Themes Goals

  10. Physics division. Progress report for period ending September 30, 1996

    SciTech Connect (OSTI)

    Ball, S.J. [ed.

    1997-04-01T23:59:59.000Z

    This report covers the research and development activities of the Physics Division for the 1995 and 1996 fiscal years, beginning October 1, 1994, and ending September 30, 1996. The activities of the Division continue to be concentrated in the areas of experimental nuclear physics, experimental atomic physics, and theoretical nuclear and atomic physics. In addition, there are smaller programs in plasma diagnostics and data compilation and evaluation. During the period of this report, there has been considerable success in bringing the Holifield Radioactive Ion Beam Facility (HRIBF) into routine operation. The budgets of the nuclear physics portion of the Division have increased each year in nearly all areas, and several new members have been added to the Division research and development staff. On August 30, 1996, the HRIBF successfully accelerated its first radioactive ion beams, {sup 69}As and {sup 70}As. Prior to this, the heart of the facility, the RIB injector system, was completed, including installation of a remote handling system for the target/ion source assembly. Target and ion source development is likely to be the technical key to success of the HRIBF. We have expanded our efforts in those development areas. Of special note is the development of highly permeable composite targets which have now been shown to allow release of difficult-to-produce radioactive ions such as {sup 17,18}F. A summary of the HRIBF work is provided in Chapter 1, along with supporting activities of the Joint Institute for Heavy Ion Research.

  11. Transmutation of {sup 129}I Using an Accelerator-Driven System

    SciTech Connect (OSTI)

    Nishihara, Kenji; Takano, Hideki [Japan Atomic Energy Research Institute (Japan)

    2002-01-15T23:59:59.000Z

    A conceptual blanket design for {sup 129}I transmutation is proposed for an accelerator-driven system (ADS) that is designed to transmute minor actinides (MAs). In this ADS, 250 kg/yr of MA and 56 kg/yr of iodine are simultaneously transmuted, and they correspond to the quantities generated from {approx}10 units of existing light water reactors. Furthermore, an introduction scenario and the benefit of iodine transmutation are studied for future introduction of fast breeder reactors. It is shown that the transmutation of iodine benefits the concept of underground disposal.

  12. accelerator beam dumps: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the blaze at the Tagarades dump under control. Efforts had been hampered by the extreme heat as the fire burned plastic items Columbia University 385 Accelerator Division...

  13. A hybrid data acquisition system for magnetic measurements of accelerator magnets

    SciTech Connect (OSTI)

    Wang, X.; Hafalia, R.; Joseph, J.; Lizarazo, J.; Martchevsky, M.; Sabbi, G. L.

    2011-06-03T23:59:59.000Z

    A hybrid data acquisition system was developed for magnetic measurement of superconducting accelerator magnets at LBNL. It consists of a National Instruments dynamic signal acquisition (DSA) card and two Metrolab fast digital integrator (FDI) cards. The DSA card records the induced voltage signals from the rotating probe while the FDI cards records the flux increment integrated over a certain angular step. This allows the comparison of the measurements performed with two cards. In this note, the setup and test of the system is summarized. With a probe rotating at a speed of 0.5 Hz, the multipole coefficients of two magnets were measured with the hybrid system. The coefficients from the DSA and FDI cards agree with each other, indicating that the numerical integration of the raw voltage acquired by the DSA card is comparable to the performance of the FDI card in the current measurement setup.

  14. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    differenziali sono state fatte considerando un asse per volta, cioè impiegando due canali della scheda, grazie riferimento scelto per la descrizione degli spostamenti è rappresentato in Figura 1, dove l'asse z è

  15. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    -5 MISURA QUADRUPOLO ASTER #2 CON SISTEMA DANFYSIK RICERCA DELL'ASSE MAGNETICO B. Bolli, F. Iungo, C. Sanelli, M. Sardone Nel seguito si riportano i risultati relativi alla misura dell'asse magnetico del. #12;MM-5 pg. 3 FIG. 1 #12;MM-5 pg. 4 Le misure per l'individuazione dell'asse magnetico vanno

  16. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    asse coincidente con quello di un laser, solidale alla macchina, e da un altro appartenente al piano verticale passante per il primo. La messa a punto della macchina è tale che l'asse del laser e quello della allineamento magnetico finale, viene misurato e quindi mosso in modo da portare il suo centro magnetico sull'asse

  17. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    in the following : - Thermionic gun - Prebuncher at the main LINAC frequency f = 3 GHz. - Standing Wave (SWV . - Positron converter - Capture section - Low current e+e- TW LINAC with output energy 510 MeV. 2 - LINAC.9 Injection into the DR idr 0.5 Converter to DR transport ldr = 0.9 Positron conversion @ 250 MeV c = 8.0 10

  18. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    suitable material for the DANE vacuum chamber theoretical and experimental results on some aluminum alloys and mechanical characteristics are considered aluminum and aluminum alloys are preferable materials for ultrahigh - Properties of commercial grade aluminum alloy and stainless steel [2] Aluminum Stainless Commercial grade

  19. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    collegate due pompe a turbina agli attacchi presenti agli estremi della TL. Dopo un pompaggio di 10 giorni

  20. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    of pumps could be added. DISTRIBUTED ION PUMPS Along the vacuum chamber of the sector we are considering and information about the storage ring vacuum chamber components (pumps, valves, gauges, and so on), GAS chamber sector composed by two bending magnets and one wiggler, we have: - 1021 phot/sec per sector

  1. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    emittances is discussed. This method allows also the evaluation of the beam optical functions (Twiss - The 'scanning quad' method 1.1 General description The emittance and the Twiss parameters values are derived and analyzed in order to derive emittance and Twiss parameters. In § 1.3 it will be described how this analysis

  2. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    ) This is the matrix that in MAD is denoted as R matrix in the output of the command TWISS when the COUPLE option , , , , = = - + = = + + 11 2 12 11 12 2 22 2 12 22 12 2 2 2 (16) ( a b a b a b, , ,, , are the Twiss parameters of the two

  3. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    - razione delle varie macchine e per la protezione di eventuali valvole da vuoto. Si propone quindi come

  4. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    of possible high power loss. Another potential danger is creation of dust particles between the sliding of the coupling of the power spectrum lines to the HOMs is not negligible. The power loss in case of the full coupling can be of the order of some thousand watts. In order to estimate the possible power loss we can

  5. ANE TECHNICAL NOTE NFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    ADAPTATION OF THE DANE LONGITUDINAL KICKER GEOMETRY TO THE NEEDS OF THE BESSY II SYNCHROTRON LIGHT SOURCE A. Gallo, T. Knuth(*), F. Marcellini, B. Spataro, M. Zobov (*) BESSY II, Rodower Chaussee 5, Berlin modes. Recently, the group of BESSY II, the new Berlin synchrotron light source whose construction

  6. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    LATTICE UPDATE M.E. Biagini, S. Guiducci, M.R. Masullo, G. Vignola 1. INTRODUCTION An improved version are of a different type: the first one nearer to the IP is a sector type dipole, while the second is a rectangular 2.III - DANE single ring parameters list Energy (MeV) 510 Circumference (m) 97.69 Dipole bending

  7. DANE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    ) feedback effect 3) beam-cavity interaction. In Fig.1 we show a simplified flow chart of the code. The input. 1 - Flow chart. 2.1 Propagation around the ring The quantities necessary to describe the motion of a single bunch in the machine, are the energy deviation E with respect to the nominal energy Eo

  8. Pyrochemical separations technologies envisioned for the U. S. accelerator transmutation of waste system

    SciTech Connect (OSTI)

    Laidler, J. J.

    2000-02-17T23:59:59.000Z

    A program has been initiated for the purpose of developing the chemical separations technologies necessary to support a large Accelerator Transmutation of Waste (ATW) system capable of dealing with the projected inventory of spent fuel from the commercial nuclear power stations in the United States. The baseline process selected combines aqueous and pyrochemical processes to enable the efficient separation of uranium, technetium, iodine, and the transuranic elements from LWR spent fuel. The diversity of processing methods was chosen for both technical and economic factors. A six-year technology evaluation and development program is foreseen, by the end of which an informed decision can be made on proceeding with demonstration of the ATW system.

  9. SYSTEMS DIVISION RESEARCH 2013 1 Abstract--High-Redundancy Actuator (HRA) refers to an

    E-Print Network [OSTI]

    AND MOTIVATION Modern engineering technologies depend strongly on complex design to meet their required of the system. Parallel configuration will also be rendered useless when lock-up faults occur. HRA is a new

  10. Physics division annual report 1999

    SciTech Connect (OSTI)

    Thayer, K., ed.; Physics

    2000-12-06T23:59:59.000Z

    This report summarizes the research performed in the past year in the Argonne Physics Division. The Division's programs include operation of ATLAS as a national heavy-ion user facility, nuclear structure and reaction research with beams of heavy ions, accelerator research and development especially in superconducting radio frequency technology, nuclear theory and medium energy nuclear physics. The Division took significant strides forward in its science and its initiatives for the future in the past year. Major progress was made in developing the concept and the technology for the future advanced facility of beams of short-lived nuclei, the Rare Isotope Accelerator. The scientific program capitalized on important instrumentation initiatives with key advances in nuclear science. In 1999, the nuclear science community adopted the Argonne concept for a multi-beam superconducting linear accelerator driver as the design of choice for the next major facility in the field a Rare Isotope Accelerator (WA) as recommended by the Nuclear Science Advisory Committee's 1996 Long Range Plan. Argonne has made significant R&D progress on almost all aspects of the design concept including the fast gas catcher (to allow fast fragmentation beams to be stopped and reaccelerated) that in large part defined the RIA concept the superconducting rf technology for the driver accelerator, the multiple-charge-state concept (to permit the facility to meet the design intensity goals with existing ion-source technology), and designs and tests of high-power target concepts to effectively deal with the full beam power of the driver linac. An NSAC subcommittee recommended the Argonne concept and set as tie design goal Uranium beams of 100-kwatt power at 400 MeV/u. Argonne demonstrated that this goal can be met with an innovative, but technically in-hand, design. The heavy-ion research program focused on GammaSphere, the premier facility for nuclear structure gamma-ray studies. One example of the ground-breaking research with Garnmasphere was the first study of the limits of stability with angular momentum in the shell stabilized nobelium isotopes. It was found that these heaviest nuclei could be formed at surprisingly high angular momentum, providing important new insight into the production mechanisms for super-heavy elements. Another focus continues to be experiments with short-lived beams for critical nuclear astrophysics applications. Measurements revealed that {sup 44}Ti is more readily destroyed in supernovae than was expected. Major progress was made in collecting and storing unstable ions in the Canadian Penning Trap. The technique of stopping and rapidly extracting ions from a helium gas cell led directly to the new paradigm in the production of rare isotope beams that became RIA. ATLAS provided a record 6046 hours of beam use for experiments in FY99. The facility pressed hard to support the heavy demands of the GammaSphere Research program but maintained an operational reliability of 93%. Of the 29 different isotopes provided as beams in FY99, radioactive beams of {sup 44}Ti and {sup 17}F comprised 6% of the beam time. The theoretical efforts in the Division made dramatic new strides in such topics as quantum Monte Carlo calculations of light nuclei to understand microscopic many-body forces in nuclei; QCD calculations based on the Dyson-Schwinger approach which were extended to baryon systems and finite temperatures and densities; the structure of heavy nuclei; and proton decay modes of nuclei far from stability. The medium-energy program continues to focus on new techniques to understand how the quark-gluon structure of matter impacts the structure of nuclei. The HERMES experiment began making measurements of the fraction of the spin of the nucleon carried by the glue. Drell-Yan experiments study the flavor composition of the sea of the proton. Experiments at Jefferson lab search for clues of QCD dynamics at the hadronic level. A major advance in trace isotope analysis was realized with pioneering work on Atom Trap Trace Analysis, exploitin

  11. AN ACCELERATOR-BASED NEUTRON MICROBEAM SYSTEM FOR STUDIES OF RADIATION EFFECTS

    E-Print Network [OSTI]

    Brenner, David Jonathan

    and David J. Brenner1 1 Radiological Research Accelerator Facility, Columbia University, Irvington, NY 10533 2010 A novel neutron microbeam is being developed at the Radiological Research Accelerator Facility on existing microbeam tech- niques at the Radiological Research Accelerator Facility (RARAF) of Columbia

  12. Superconducting Magnet Division

    E-Print Network [OSTI]

    Superconducting Magnet Division DOE NP Program Review - July 06 1 Brookhaven Magnet Division - Nuclear Physics Program Support Activities Superconducting Magnet Program RHIC Operations Support Spin Summary Peter Wanderer, DOE review, July 25, 2006 Acting Head, Superconducting Magnet Division #12

  13. Laser-based proton acceleration on ultra-thin foil with a 100 TW class high intensity laser system

    E-Print Network [OSTI]

    Marjoribanks, Robin S.

    of electromagnetic fields in plasma, isotopes production or hadron therapy. The 100 TW class laser systemLaser-based proton acceleration on ultra-thin foil with a 100 TW class high intensity laser system. To characterize the plasma expansion, we monitor it with an imaging technique using a femtosecond laser probe

  14. ASYMPTOTIC ANALYSIS OF CHANNEL DIVISION MULTIPLE ACCESS SCHEMES FOR ULTRA-WIDEBAND SYSTEMS

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    that the asymp- totic spectral efficiency depends only on the system load, the power delay profile, the noise of the paths, is built based on the channel power profile. The capacity is in- vestigated assuming no Channel combi- nations of continuous impulses of finite duration and employ two different power delay profiles

  15. Design and implementation of a Client-Server System for Acquiring Beam Intensity Data from High Energy Accelerators at CERN

    E-Print Network [OSTI]

    Topaloudis, A; Bellas, N; Jensen, L

    The world’s largest research center in the domain of High Energy Physics (HEP) is the European Organization for Nuclear Research (CERN) whose main goal is to accelerate particles through a sequence of acceleratorsaccelerator complex – and bring them into collision in order to study the fundamental elements of matter and the forces acting between them. For controlling the accelerator complex, CERN needs several diagnostic tools to provide information about the beam’s attributes and one such system is the Fast Beam Current Transformer (FBCT) measuring system that provides bunch-by-bunch and total beam intensity information. The current hardware and firmware of the FBCT system has certain issues and lacks diagnostics as a lot of the calculations are done in an FPGA. In order to improve on this, the firmware was redesigned and simplified in order to increase its capabilities and provide the base of a unified FBCT measuring system that could be installed in several of CERN’s accelerator complex’s pa...

  16. AGS SUPER NEUTRINO BEAM FACILITY ACCELERATOR AND TARGET SYSTEM DESIGN (NEUTRINO WORKING GROUP REPORT-II).

    SciTech Connect (OSTI)

    DIWAN,M.; MARCIANO,W.; WENG,W.; RAPARIA,D.

    2003-04-21T23:59:59.000Z

    This document describes the design of the accelerator and target systems for the AGS Super Neutrino Beam Facility. Under the direction of the Associate Laboratory Director Tom Kirk, BNL has established a Neutrino Working Group to explore the scientific case and facility requirements for a very long baseline neutrino experiment. Results of a study of the physics merit and detector performance was published in BNL-69395 in October 2002, where it was shown that a wide-band neutrino beam generated by a 1 MW proton beam from the AGS, coupled with a half megaton water Cerenkov detector located deep underground in the former Homestake mine in South Dakota would be able to measure the complete set of neutrino oscillation parameters: (1) precise determination of the oscillation parameters {Delta}m{sub 32}{sup 2} and sin{sup 2} 2{theta}{sub 32}; (2) detection of the oscillation of {nu}{sub {mu}}-{nu}{sub e} and measurement of sin{sup 2} 2{theta}{sub 13}; (3) measurement of {Delta}m{sub 21}{sup 2} sin 2{theta}{sub 12} in a {nu}{sub {mu}} {yields} {nu}{sub e} appearance mode, independent of the value of {theta}{sub 13}; (4) verification of matter enhancement and the sign of {Delta}m{sub 32}{sup 2}; and (5) determination of the CP-violation parameter {delta}{sub CP} in the neutrino sector. This report details the performance requirements and conceptual design of the accelerator and the target systems for the production of a neutrino beam by a 1.0 MW proton beam from the AGS. The major components of this facility include a new 1.2 GeV superconducting linac, ramping the AGS at 2.5 Hz, and the new target station for 1.0 MW beam. It also calls for moderate increase, about 30%, of the AGS intensity per pulse. Special care is taken to account for all sources of proton beam loss plus shielding and collimation of stray beam halo particles to ensure equipment reliability and personal safety. A preliminary cost estimate and schedule for the accelerator upgrade and target system are also included.

  17. Biological Systems Science Division (BSSD) | U.S. DOE Office of Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced Materials Find Find More LikeAndreasHelp(SC) Biological Systems

  18. Nuclear Systems Design and Analysis (NSD&A) Division | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic2 OPAM615_CostNSAR - T en Y earEnergy Research andSiteSafetyScienceSystems

  19. Finance Division Employee Status Form Finance Division

    E-Print Network [OSTI]

    Crews, Stephen

    Finance Division Employee Status Form Finance Division CB 1225, 104 Airport Drive Chapel Hill, NC Phone: 919-962-7242 finance.unc.edu Failure to Follow Instructions Below Will Delay Processing Today information in five areas: 1. Division-wide emergency call tree 2. Finance Web site contacts 3. Departmental

  20. Proposal for the award of a contract for the design, supply, installation and commissioning of Heating, Ventilation and Air-Conditioning (HVAC) systems for the PS accelerator infrastructure

    E-Print Network [OSTI]

    2012-01-01T23:59:59.000Z

    Proposal for the award of a contract for the design, supply, installation and commissioning of Heating, Ventilation and Air-Conditioning (HVAC) systems for the PS accelerator infrastructure

  1. Energy Management and Control Systems and their Use for Performance Monitoring in the LoanSTAR Program, Technical Report prepared for the Lawrence Berkeley Laboratory, University of California, Energy and Environment Division

    E-Print Network [OSTI]

    Heinemeier, K. E.; Akbari, H.

    1993-01-01T23:59:59.000Z

    ESL-TR-93/06-02 LBL-33114 UC-350 LAWRENCE BERKELEY LABORATORY UNIVERSITY OF CALIFORNIA ENERGY AND ENVIRONMENT DIVISION ENERGY MANAGEMENT AND CONTROL SYSTEMS AND THEIR USE FOR PERFORMANCE MONITORING IN THE LOANSTAR PROGRAM Final Report Prepared...

  2. RESEARCH UPDATE Ecology Division

    E-Print Network [OSTI]

    1 RESEARCH UPDATE Ecology Division Biotype has changed its name to Ecotype! Following the re-organisation of Forest Research into five science Divisions and three Support Divisions, the former Woodland Ecology Branches to form the new Ecology Division. We decided to give the divisional newsletter a new name (and

  3. Final technical report [ACCELERATED MOLECULAR DYNAMICS SIMULATIONS OF REACTIVE HYDROCARBON SYSTEMS

    SciTech Connect (OSTI)

    Stuart, Steven J.

    2014-02-25T23:59:59.000Z

    The research activities in this project consisted of four different sub-projects. Three different accelerated dynamics techniques (parallel replica dynamics, hyperdynamics, and temperature-accelerated dynamics) were applied to the modeling of pyrolysis of hydrocarbons. In addition, parallel replica dynamics was applied to modeling of polymerization.

  4. Guidance Systems Division ,

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group currentBradleyTableSelling CorpNewCF INDUSTRIES,L? . -. .- *' *---:Oockec

  5. Physics Division progress report, January 1, 1984-September 30, 1986

    SciTech Connect (OSTI)

    Keller, W.E. (comp.)

    1987-10-01T23:59:59.000Z

    This report provides brief accounts of significant progress in development activities and research results achieved by Physics Division personnel during the period January 1, 1984, through September 31, 1986. These efforts are representative of the three main areas of experimental research and development in which the Physics Division serves Los Alamos National Laboratory's and the Nation's needs in defense and basic sciences: (1) defense physics, including the development of diagnostic methods for weapons tests, weapon-related high-energy-density physics, and programs supporting the Strategic Defense Initiative; (2) laser physics and applications, especially to high-density plasmas; and (3) fundamental research in nuclear and particle physics, condensed-matter physics, and biophysics. Throughout the report, emphasis is placed on the design, construction, and application of a variety of advanced, often unique, instruments and instrument systems that maintain the Division's position at the leading edge of research and development in the specific fields germane to its mission. A sampling of experimental systems of particular interest would include the relativistic electron-beam accelerator and its applications to high-energy-density plasmas; pulsed-power facilities; directed energy weapon devices such as free-electron lasers and neutral-particle-beam accelerators; high-intensity ultraviolet and x-ray beam lines at the National Synchrotron Light Source (at Brookhaven National Laboratory); the Aurora KrF ultraviolet laser system for projected use as an inertial fusion driver; antiproton physics facility at CERN; and several beam developments at the Los Alamos Meson Physics Facility for studying nuclear, condensed-matter, and biological physics, highlighted by progress in establishing the Los Alamos Neutron Scattering Center.

  6. 41 Current projects Climate Variability Research Research within this Division focuses on large-scale

    E-Print Network [OSTI]

    Haak, Hein

    Research Division participates in the informal network for Earth System Models of Intermediate Complexity

  7. G-NetMon: A GPU-accelerated Network Performance Monitoring System for Large Scale Scientific Collaborations

    SciTech Connect (OSTI)

    Wu, Wenji; DeMar, Phil; Holmgren, Don; Singh, Amitoj; Pordes, Ruth; /Fermilab

    2011-08-01T23:59:59.000Z

    At Fermilab, we have prototyped a GPU-accelerated network performance monitoring system, called G-NetMon, to support large-scale scientific collaborations. Our system exploits the data parallelism that exists within network flow data to provide fast analysis of bulk data movement between Fermilab and collaboration sites. Experiments demonstrate that our G-NetMon can rapidly detect sub-optimal bulk data movements.

  8. Earth Sciences Division Division Director

    E-Print Network [OSTI]

    Berkeley Nanogeoscience Center Center for Computational Geoscience Center for Environmental Biotechnology Systems Burton M. (Mack) Kennedy Nuclear Energy & Waste Jens Birkholzer Environmental & Biological Systems Science Susan S. Hubbard Janet Jansson Environmental Remediation & Water Resources Kenneth Hurst Williams

  9. A practical target system for accelerator-based BNCT which may effectively double the dose rate

    E-Print Network [OSTI]

    Brenner, David Jonathan

    . Randers-Pehrsona) and D. J. Brenner Center for Radiological Research, Radiological Research Accelerator Facility, Columbia University, Irvington, New York 10533 Received 27 May 1997; accepted for publication 31

  10. Entanglement of Accelerating Particles

    E-Print Network [OSTI]

    W. L. Ku; M. -C. Chu

    2007-09-03T23:59:59.000Z

    We study how the entanglement of a maximally entangled pair of particles is affected when one or both of the pair are uniformly accelerated, while the detector remains in an inertial frame. We find that the entanglement is unchanged if all degrees of freedom are considered. However, particle pairs are produced, and the entanglements of different bipartite systems may change with the acceleration. In particular, the entanglement between accelerating fermions is transferred preferentially to the produced antiparticles when the acceleration is large, and the entanglement transfer is complete when the acceleration approaches infinity. However, for scalar particles, no entanglement transfer to the antiparticles is observed.

  11. Conceptual design of minor actinides burner with an accelerator-driven subcritical system.

    SciTech Connect (OSTI)

    Cao, Y.; Gohar, Y. (Nuclear Engineering Division)

    2011-11-04T23:59:59.000Z

    In the environmental impact study of the Yucca Mountain nuclear waste repository, the limit of spent nuclear fuel (SNF) for disposal is assessed at 70,000 metric tons of heavy metal (MTHM), among which 63,000 MTHM are the projected SNF discharge from U.S. commercial nuclear power plants though 2011. Within the 70,000 MTHM of SNF in storage, approximately 115 tons would be minor actinides (MAs) and 585 tons would be plutonium. This study describes the conceptual design of an accelerator-driven subcritical (ADS) system intended to utilize (burn) the 115 tons of MAs. The ADS system consists of a subcritical fission blanket where the MAs fuel will be burned, a spallation neutron source to drive the fission blanket, and a radiation shield to reduce the radiation dose to an acceptable level. The spallation neutrons are generated from the interaction of a 1 GeV proton beam with a lead-bismuth eutectic (LBE) or liquid lead target. In this concept, the fission blanket consists of a liquid mobile fuel and the fuel carrier can be LBE, liquid lead, or molten salt. The actinide fuel materials are dissolved, mixed, or suspended in the liquid fuel carrier. Therefore, fresh fuel can be fed into the fission blanket to adjust its reactivity and to control system power during operation. Monte Carlo analyses were performed to determine the overall parameters of an ADS system utilizing LBE as an example. Steady-state Monte Carlo simulations were studied for three fission blanket configurations that are similar except that the loaded amount of actinide fuel in the LBE is either 5, 7, or 10% of the total volume of the blanket, respectively. The neutron multiplication factor values of the three configurations are all approximately 0.98 and the MA initial inventories are each approximately 10 tons. Monte Carlo burnup simulations using the MCB5 code were performed to analyze the performance of the three conceptual ADS systems. Preliminary burnup analysis shows that all three conceptual ADS systems consume about 1.2 tons of actinides per year and produce 3 GW thermal power, with a proton beam power of 25 MW. Total MA fuel that would be consumed in the first 10 years of operation is 9.85, 11.80, or 12.68 tons, respectively, for the systems with 5, 7, or 10% actinide fuel particles loaded in the LBE. The corresponding annual MA fuel transmutation rate after reaching equilibrium at 10 years of operation is 0.83, 0.94, or 1.02 tons/year, respectively. Assuming that the ADS systems can be operated for 35 full-power years, the total MAs consumed in the three ADS systems are 30.6, 35.3, and 37.2 tons, respectively. For the three configurations, it is estimated that 3.8, 3.3, or 3.1 ADS system units are required to utilize the entire 115 tons of MA fuel in the SNF inventory, respectively.

  12. Physics Division annual report 2004.

    SciTech Connect (OSTI)

    Glover, J.

    2006-04-06T23:59:59.000Z

    This report highlights the research performed in 2004 in the Physics Division of Argonne National Laboratory. The Division's programs include operation of ATLAS as a national user facility, nuclear structure and reaction research, nuclear theory, medium energy nuclear research and accelerator research and development. The intellectual challenges of this research represent some of the most fundamental challenges in modern science, shaping our understanding of both tiny objects at the center of the atom and some of the largest structures in the universe. A great strength of these efforts is the critical interplay of theory and experiment. Notable results in research at ATLAS include a measurement of the charge radius of He-6 in an atom trap and its explanation in ab-initio calculations of nuclear structure. Precise mass measurements on critical waiting point nuclei in the rapid-proton-capture process set the time scale for this important path in nucleosynthesis. An abrupt fall-off was identified in the subbarrier fusion of several heavy-ion systems. ATLAS operated for 5559 hours of research in FY2004 while achieving 96% efficiency of beam delivery for experiments. In Medium Energy Physics, substantial progress was made on a long-term experiment to search for the violation of time-reversal invariance using trapped Ra atoms. New results from HERMES reveal the influence of quark angular momentum. Experiments at JLAB search for evidence of color transparency in rho-meson production and study the EMC effect in helium isotopes. New theoretical results include a Poincare covariant description of baryons as composites of confined quarks and non-point-like diquarks. Green's function Monte Carlo techniques give accurate descriptions of the excited states of light nuclei and these techniques been extended to scattering states for astrophysics studies. A theoretical description of the phenomena of proton radioactivity has been extended to triaxial nuclei. Argonne continues to lead in the development and exploitation of the new technical concepts that will truly make RIA, in the words of NSAC, ''the world-leading facility for research in nuclear structure and nuclear astrophysics''. The performance standards for new classes of superconducting cavities continue to increase. Driver linac transients and faults have been analyzed to understand reliability issues and failure modes. Liquid-lithium targets were shown to successfully survive the full-power deposition of a RIA beam. Our science and our technology continue to point the way to this major advance. It is a tremendously exciting time in science for RIA holds the keys to unlocking important secrets of nature. The work described here shows how far we have come and makes it clear we know the path to meet these intellectual challenges. The great progress that has been made in meeting the exciting intellectual challenges of modern nuclear physics reflects the talents and dedication of the Physics Division staff and the visitors, guests and students who bring so much to the research.

  13. Aviation Human Factors Division Institute of Aviation

    E-Print Network [OSTI]

    AHFD Aviation Human Factors Division Institute of Aviation University of Illinois at Urbana Systems Monitoring and Control Gavin R. Essenberg, Douglas A. Wiegmann, Aviation Human Factors Division experiments with more difficult path selection tasks might reveal if there are advantages for motion. Overall

  14. Accelerators and the Accelerator Community

    E-Print Network [OSTI]

    Malamud, Ernest

    2009-01-01T23:59:59.000Z

    for a PhD in accelerator physics was by E.O. Lawrence.of Beams) organizes accelerator physics sessions at APSstudents specializing in accelerator physics are not being “

  15. Division of Agriculture,

    E-Print Network [OSTI]

    Ray, David

    DAFVM Division of Agriculture, Forestry, and Veterinary M e d i c i n e Visit us online at www to the Mississippi State University Division of Agriculture, Forestry, and Veterinary Medicine. Discrimination based-3-14) Mississippi State University's Division of Agriculture, Forestry, and Veterinary Medicine, or DAFVM

  16. DIVISION OF GRADUATE STUDIES

    E-Print Network [OSTI]

    Palffy-Muhoray, Peter

    recipients at the time of their graduation to monitor and project the scientific workforce. Between 1961DIVISION OF GRADUATE STUDIES 2012-2013 ACADEMIC YEAR REpORT Excellence in Action Division of Graduate Studies #12;Division of Graduate Studies Kent State University 2012 - 2013 Academic Year Report

  17. Microelectromechanical acceleration-sensing apparatus

    DOE Patents [OSTI]

    Lee, Robb M. (Albuquerque, NM); Shul, Randy J. (Albuquerque, NM); Polosky, Marc A. (Albuquerque, NM); Hoke, Darren A. (Albuquerque, NM); Vernon, George E. (Rio Rancho, NM)

    2006-12-12T23:59:59.000Z

    An acceleration-sensing apparatus is disclosed which includes a moveable shuttle (i.e. a suspended mass) and a latch for capturing and holding the shuttle when an acceleration event is sensed above a predetermined threshold level. The acceleration-sensing apparatus provides a switch closure upon sensing the acceleration event and remains latched in place thereafter. Examples of the acceleration-sensing apparatus are provided which are responsive to an acceleration component in a single direction (i.e. a single-sided device) or to two oppositely-directed acceleration components (i.e. a dual-sided device). A two-stage acceleration-sensing apparatus is also disclosed which can sense two acceleration events separated in time. The acceleration-sensing apparatus of the present invention has applications, for example, in an automotive airbag deployment system.

  18. Acquisition Notice Posting Headquarters Acquisition Division

    E-Print Network [OSTI]

    Christian, Eric

    the technology readiness of the selected systems, provide tangible, innovative technology products, are cost CROSSCUTTING CAPABILITY DEMONSTRATIONS DIVISION TECHNOLOGY DEMONSTRATION MISSIONS PROGRAM General Information, NASA plans to begin the Technology Demonstrations Missions Program. One of the greatest challenges

  19. Architecture, implementation, and testing of a multiple-shell gas injection system for high current implosions on the Z accelerator

    SciTech Connect (OSTI)

    Krishnan, Mahadevan; Elliott, Kristi Wilson; Madden, Robert E. [Alameda Applied Sciences Corporation, San Leandro, California 94577 (United States); Coleman, P. L. [Evergreen Hill Sciences, Philomath, Oregon 97370 (United States); Thompson, John R. [812 Temple Street, San Diego, California 92106 (United States); Bixler, Alex [Space Sciences Laboratory, University of California, Berkeley, Berkeley, California 94720 (United States); Lamppa, D. C.; McKenney, J. L.; Strizic, T.; Johnson, D.; Johns, O.; Vigil, M. P.; Jones, B.; Ampleford, D. J.; Savage, M. E.; Cuneo, M. E.; Jones, M. C. [Sandia National Laboratories, Albuquerque, New Mexico 87185 (United States)

    2013-06-15T23:59:59.000Z

    Tests are ongoing to conduct {approx}20 MA z-pinch implosions on the Z accelerator at Sandia National Laboratory using Ar, Kr, and D{sub 2} gas puffs as the imploding loads. The relatively high cost of operations on a machine of this scale imposes stringent requirements on the functionality, reliability, and safety of gas puff hardware. Here we describe the development of a prototype gas puff system including the multiple-shell nozzles, electromagnetic drivers for each nozzle's valve, a UV pre-ionizer, and an inductive isolator to isolate the {approx}2.4 MV machine voltage pulse present at the gas load from the necessary electrical and fluid connections made to the puff system from outside the Z vacuum chamber. This paper shows how the assembly couples to the overall Z system and presents data taken to validate the functionality of the overall system.

  20. Argonne Physics Division - ATLAS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ATLAS Operations personnel, and to various experimental instrument specialists in the Physics Division. The PAC members will review each proposal for scientific merit and...

  1. High-value use of weapons-plutonium by burning in molten salt accelerator-driven subcritical systems or reactors

    SciTech Connect (OSTI)

    Bowman, C.D.; Venneri, F.

    1993-11-01T23:59:59.000Z

    The application of thermal-spectrum molten-salt reactors and accelerator-driven subcritical systems to the destruction of weapons-return plutonium is considered from the perspective of deriving the maximum societal benefit. The enhancement of electric power production from burning the fertile fuel {sup 232}Th with the plutonium is evaluated. Also the enhancement of destruction of the accumulated waste from commercial nuclear reactors is considered using the neutron-rich weapons plutonium. Most cases examined include the concurrent transmutation of the long-lived actinide and fission product waste ({sup 99}Tc, {sup 129}I, {sup 135}Cs, {sup 126}Sn and {sup 79}Se).

  2. Physics division annual report - October 2000.

    SciTech Connect (OSTI)

    Thayer, K. [ed.

    2000-10-16T23:59:59.000Z

    This report summarizes the research performed in the past year in the Argonne Physics Division. The Division's programs include operation of ATLAS as a national heavy-ion user facility, nuclear structure and reaction research with beams of heavy ions, accelerator research and development especially in superconducting radio frequency technology, nuclear theory and medium energy nuclear physics. The Division took significant strides forward in its science and its initiatives for the future in the past year. Major progress was made in developing the concept and the technology for the future advanced facility of beams of short-lived nuclei, the Rare Isotope Accelerator. The scientific program capitalized on important instrumentation initiatives with key advances in nuclear science. In 1999, the nuclear science community adopted the Argonne concept for a multi-beam superconducting linear accelerator driver as the design of choice for the next major facility in the field a Rare Isotope Accelerator (RIA) as recommended by the Nuclear Science Advisory Committee's 1996 Long Range Plan. Argonne has made significant R&D progress on almost all aspects of the design concept including the fast gas catcher (to allow fast fragmentation beams to be stopped and reaccelerated) that in large part, defined the RIA concept the superconducting rf technology for the driver accelerator, the multiple-charge-state concept (to permit the facility to meet the design intensity goals with existing ion-source technology), and designs and tests of high-power target concepts to effectively deal with the full beam power of the driver linac. An NSAC subcommittee recommended the Argonne concept and set as tie design goal Uranium beams of 100-kwatt power at 400 MeV/u. Argonne demonstrated that this goal can be met with an innovative, but technically in-hand, design.

  3. ACCELERATOR & FUSION RESEARCH DIV. ANNUAL REPORT, OCT. 79 - SEPT. 80

    E-Print Network [OSTI]

    Authors, Various

    2010-01-01T23:59:59.000Z

    11, 1980, p. 725. MAGNETIC FUSION ENERGY Staff W. Kunkel andsupport) Accelerator and Fusion Research Division N.Abt Y.Wong J. Zatver HEAVY ION FUSION Work continued during FY80

  4. Simulations of flame acceleration and deflagration-to-detonation transitions in methane-air systems

    SciTech Connect (OSTI)

    Kessler, D.A.; Gamezo, V.N.; Oran, E.S. [Laboratory for Computational Physics and Fluid Dynamics, Naval Research Laboratory, Washington, DC (United States)

    2010-11-15T23:59:59.000Z

    Flame acceleration and deflagration-to-detonation transitions (DDT) in large obstructed channels filled with a stoichiometric methane-air mixture are simulated using a single-step reaction mechanism. The reaction parameters are calibrated using known velocities and length scales of laminar flames and detonations. Calculations of the flame dynamics and DDT in channels with obstacles are compared to previously reported experimental data. The results obtained using the simple reaction model qualitatively, and in many cases, quantitatively match the experiments and are found to be largely insensitive to small variations in model parameters. (author)

  5. Case Files of the California Poison Control System, San Francisco Division: Blue Thunder Ingestion: Methanol, Nitromethane, and Elevated Creatinine

    E-Print Network [OSTI]

    Ngo, Adeline Su-Yin; Rowley, Freda; Olson, Kent R.

    2010-01-01T23:59:59.000Z

    Files of the California Poison Control System, San FranciscoK. R. Olson California Poison Control System, San Franciscoreported to the Drug and Poison Information Center in Izmir,

  6. Superconducting Magnet Division

    E-Print Network [OSTI]

    Gupta, Ramesh

    Superconducting Magnet Division Permanent Magnet Designs with Large Variations in Field Strength the residual field of the magnetized bricks by concentrating flux lines at the iron pole. Low Field Design Medium Field Design Superconducting Magnet Division Dipole and Quadrupole Magnets for RHIC e

  7. Hypertension Research Division

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Hypertension & Vascular Research Division Department of Internal Medicine Jeffrey L. Garvin, Ph.D. ­ Division Head #12;Prevalence of Hypertension in U.S. Men by Age and Ethnicity 18 ­ 29 30 ­ 39 40 ­ 49 50 Prevalence of High BP Adapted from Burt et al. Hypertension 1995;25:305. 25 50 75 #12;Introduction

  8. Superconducting Magnet Division

    E-Print Network [OSTI]

    McDonald, Kirk

    Superconducting Magnet Division Ramesh Gupta 20T Target Solenoid with HTS Insert Solenoid Capture Laboratory New York, USA http://www.bnl.gov/magnets/staff/gupta #12;Superconducting Magnet Division Ramesh of HTS may significantly reduce the amount of Tungsten shielding · Summary #12;Superconducting Magnet

  9. Direct cell reprogramming is a stochastic process amenable to acceleration

    E-Print Network [OSTI]

    van Oudenaarden, Alexander

    ARTICLES Direct cell reprogramming is a stochastic process amenable to acceleration Jacob Hanna1 demonstrate that reprogramming by these transcription factors is a continuous stochastic process where almost-division-rate-independent manner. Quantitative analyses define distinct cell-division-rate-dependent and -independent modes

  10. Instrumentation and Controls Division progress report, September 1, 1980-July 1, 1982

    SciTech Connect (OSTI)

    Klobe, L.E.E. (ed.)

    1982-12-01T23:59:59.000Z

    Activities are reported by the Reactor Systems Section, Research Instrument Section, and the Measurement and Controls Engineering Section. Reactor system activities include dynamic analysis, survillanc and diagnostic methods, design and evaluation, detectors, facilities support, process instrumentation development, and special assignments. Activities in the Research Instrument Section include the Navy-ORNL RADIAC development program, advanced ..gamma.. and x ray detector systems, neutron detection and subcriticality measurements, circuit development, position-sensitive detectors, stand-alone computers, environmental monitoring-detectors and systems, plant security, engineering support for fusion energy division, engineering support for accelerator physics, and communications: radio, closed-circuit tv, and computer. Activities in the Measurement and Controls Engineering Section include the AVLIS program; gas centrifuge enrichment technology support; Advanced Instrumentation for Reflood Studies (AIDRS) program; instrumentation development support for fuel reprocessing; in-core experiments and reactor systems; energy, conservation, and electric power systems; computer systems; measurements research; and fossil energy studies Publications are listed. (WHK)

  11. PHYSICS DIVISION CHEMICAL HYGIENE PLAN

    E-Print Network [OSTI]

    Kemner, Ken

    PHYSICS DIVISION CHEMICAL HYGIENE PLAN 2008 Prepared by _________________________________________________ T. Mullen Physics Division Chemical Hygiene Officer Reviewed by ___________________________________________________ J. Woodring Site Chemical Hygiene Officer Approved

  12. Progress on laser plasma accelerators

    SciTech Connect (OSTI)

    Chen, P.

    1986-04-01T23:59:59.000Z

    Several laser plasma accelerator schemes are reviewed, with emphasis on the Plasma Beat Wave Accelerator (PBWA). Theory indicates that a very high acceleration gradient, of order 1 GeV/m, can exist in the plasma wave driven by the beating lasers. Experimental results obtained on the PBWA experiment at UCLA confirms this. Parameters related to the PBWA as an accelerator system are derived, among them issues concerning the efficiency and the laser power and energy requirements are discussed.

  13. 2005 Conference on Information Sciences and Systems, The Johns Hopkins University, March 1618, 2005 A Linear Daisy Chain with Two Divisible Load Sources

    E-Print Network [OSTI]

    Robertazzi, Thomas G.

    load amounts at each source the overall (dual source) solution time curve is equal to the single source­18, 2005 A Linear Daisy Chain with Two Divisible Load Sources Theron Lammie and Thomas G. Robertazzi1@ece.sunysb.edu Abstract -- A finite linear daisy chain with divisible load origi- nating from the two boundary stations

  14. Development of a Rating System for a Comparative Accelerated Test Standard (Presentation)

    SciTech Connect (OSTI)

    Kurtz, S.

    2013-06-01T23:59:59.000Z

    This presentation discusses methods of developing and structuring a useful rating system and communicating the results.

  15. Physics Division computer facilities

    SciTech Connect (OSTI)

    Cyborski, D.R.; Teh, K.M.

    1995-08-01T23:59:59.000Z

    The Physics Division maintains several computer systems for data analysis, general-purpose computing, and word processing. While the VMS VAX clusters are still used, this past year saw a greater shift to the Unix Cluster with the addition of more RISC-based Unix workstations. The main Divisional VAX cluster which consists of two VAX 3300s configured as a dual-host system serves as boot nodes and disk servers to seven other satellite nodes consisting of two VAXstation 3200s, three VAXstation 3100 machines, a VAX-11/750, and a MicroVAX II. There are three 6250/1600 bpi 9-track tape drives, six 8-mm tapes and about 9.1 GB of disk storage served to the cluster by the various satellites. Also, two of the satellites (the MicroVAX and VAX-11/750) have DAPHNE front-end interfaces for data acquisition. Since the tape drives are accessible cluster-wide via a software package, they are, in addition to replay, used for tape-to-tape copies. There is however, a satellite node outfitted with two 8 mm drives available for this purpose. Although not part of the main cluster, a DEC 3000 Alpha machine obtained for data acquisition is also available for data replay. In one case, users reported a performance increase by a factor of 10 when using this machine.

  16. High Energy Physics Division semiannual report of research activities, July 1, 1993--December 31, 1993

    SciTech Connect (OSTI)

    Wagner, R.; Moonier, P.; Schoessow, P.; Talaga, R.

    1994-05-01T23:59:59.000Z

    This report describes the research conducted in the High Energy Physics Division of Argonne National Laboratory during the period of July 1, 1993--December 31, 1993. Topics covered here include experimental and theoretical particle physics, advanced accelerator physics, detector development, and experimental facilities research. Lists of division publications and colloquia are included.

  17. High Energy Physics Division semiannual report of research activities, July 1, 1992--December 30, 1992

    SciTech Connect (OSTI)

    Schoessow, P.; Moonier, P.; Talaga, R.; Wagner, R. [eds.

    1993-07-01T23:59:59.000Z

    This report describes the research conducted in the High Energy Physics Division of Argonne National Laboratory during the period of July 1, 1992--December 30, 1992. Topics covered here include experimental and theoretical particle physics, advanced accelerator physics, detector development, and experimental facilities research. Lists of division publications and colloquia are included.

  18. High Energy Physics Division semiannual report of research activities, January 1, 1993--June 30, 1993

    SciTech Connect (OSTI)

    Schoessow, P.; Moonier, P.; Talaga, R.; Wagner, R. [eds.

    1993-12-01T23:59:59.000Z

    This report describes the research conducted in the High Energy Physics Division of Argonne National Laboratory during the period of January 1, 1993--June 30, 1993. Topics covered here include experimental and theoretical particle physics, advanced accelerator physics, detector development, and experimental facilities research. Lists of division publications and colloquia are included.

  19. Physics Division progress report for period ending September 30, 1984

    SciTech Connect (OSTI)

    Livingston, A.B. (ed.)

    1985-01-01T23:59:59.000Z

    The research activities of the Division are centered primarily in three areas: experimental nuclear physics, experimental atomic physics, and theoretical nuclear and atomic physics. The largest of these efforts, experimental nuclear physics, is dominated by the heavy ion research program. A major responsibility under this program is the operation of the Holifield Heavy Ion Research Facility as a national user facility. During the period of this report, the facility has begun routine operation for the experimental program. The experimental atomic physics program has two components: the accelerator-based studies of basic collisional phenomena and the studies in support of the controlled fusion program. Also associated with the fusion-related studies are a plasma diagnostics program and the operation of an atomic physics data center. The theoretical physics program, both nuclear and atomic, is covered. This program has benefited this year from the success of the VAX-AP computer system and from the increase in manpower provided by the ORNL/University of Tennessee Distinguished Scientist Program. Smaller programs in applications and high-energy physics are summarized. During the period of this report, we continued to explore possible future extensions of the Holifield Facility. We retain a strong interest in a relativistic heavy-ion collider in the 10 x 10 GeV/nuclear energy range. The ideas for such a facility, described in last year's report, have been modified to utilize the HHIRF 25 MV tandem accelerator as the first stage. Finally, the report concludes with some general information on publications, Division activities, and personnel changes.

  20. Argonne Physics Division - ATLAS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    call 911 on the internal phones (or 252-1911 on cell phones) Safety Tom Mullen, Physics Division Safety Engineer. Please Note: If you have any comments or concerns regarding...

  1. Director, Division of Investigations

    Broader source: Energy.gov [DOE]

    The Federal Energy Regulatory Commission is looking for an experienced, highly skilled executive to serve as Director of the Division of Investigations (DOI) in the Office of Enforcement (OE). The...

  2. Division Student Liaisons

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    None Fire Protection (FP-DO) Robert J. Farris (Rob) 667-9045 sirraf@lanl.gov K493 Nuclear Criticality Safety None Operations Support Division (OS-DO) None Radiological...

  3. System for Nuclear Waste Transmutation Driven by Target-Distributed Accelerators

    E-Print Network [OSTI]

    Blanovsky, A

    2004-01-01T23:59:59.000Z

    A design concept and characteristics for an epithermal breeder controlled by variable feedback and external neutron source intensity are presented. By replacing the control rods with neutron sources, we could improve safety and perform radioactive waste burning in high flux subcritical reactors (HFSR). To increase neutron source intensity the HFSR is divided into two zones: a booster and a blanket operating with solid and liquid fuels. Use of a liquid actinide fuel permits transport of the delayed-neutron emitters from the blanket to the booster where they can provide additional neutrons or all the necessary excitation. With blanket and booster multiplication factors of k=0.95 and 0.98, respectively, an external photoneutron source rate of at least 10.sup.15 n/s (electron beam power 2.5MW) is needed to control the HFSR that produces 300MWt. An inexpensive method of obtaining large neutron fluxes is target-distributed accelerators (TDA), in which a fission electrical cell (FEC) compensates for lost beam energy...

  4. Design, construction and operational results of the IGBT controlled solid state modulator high voltage power supply used in the high power RF systems of the Low Energy Demonstration Accelerator of the accelerator production of tritium (APT) project

    SciTech Connect (OSTI)

    Bradley, J.T. III; Rees, D.; Przeklasa, R.S. [Los Alamos National Lab., NM (United States); Scott, M.C. [Continental Electronics Corp., Dallas, TX (United States)

    1998-12-31T23:59:59.000Z

    The 1700 MeV, 100 mA Accelerator Production of Tritium (APT) Proton Linac will require 244 1 MW, continuous wave RF systems. 1 MW continuous wave klystrons are used as the RF source and each klystron requires 95 kV, 17 A of beam voltage and current. The cost of the DC power supplies is the single largest percentage of the total RF system cost. Power supply reliability is crucial to overall RF system availability and AC to DC conversion efficiency affects the operating cost. The Low Energy Demonstration Accelerator (LEDA) being constructed at Los Alamos National Laboratory (LANL) will serve as the prototype and test bed for APT. The design of the RF systems used in LEDA is driven by the need to field test high efficiency systems with extremely high reliability before APT is built. The authors present a detailed description and test results of one type of advanced high voltage power supply system using Insulated Gate Bipolar Transistors (IGBTs) that has been used with the LEDA High Power RF systems. The authors also present some of the distinctive features offered by this power supply topology, including crowbarless tube protection and modular construction which allows graceful degradation of power supply operation.

  5. OPERATING EXPERIENCE WITH A NEW ACCELERATOR CONTROL SYSTEM BASED UPON MICROPROCESSORS

    E-Print Network [OSTI]

    Magyary, S.

    2010-01-01T23:59:59.000Z

    CONTROL SYSTEM BASED UPON MICROPROCESSORS* E S. Magyary, H.architecture of i t s microprocessor based control systemlarge number (~20) of microprocessor boards, each executiny

  6. Cryogenic systems for the HEB accelerator of the Superconducting Super Collider

    SciTech Connect (OSTI)

    Abramovich, S.; Yuecel, A.

    1994-07-01T23:59:59.000Z

    This report discusses the following topics related to the Superconducting Super Collider: Cryogenic system -- general requirements; cryogenic system components; heat load budgets and refrigeration plant capacities; flow and thermal characteristics; process descriptions; cryogenic control instrumentation and value engineering trade-offs.

  7. Reduction of the Radiotoxicity of Spent Nuclear Fuel Using a Two-Tiered System Comprising Light Water Reactors and Accelerator-Driven Systems

    SciTech Connect (OSTI)

    H.R. Trellue

    2003-06-01T23:59:59.000Z

    Two main issues regarding the disposal of spent nuclear fuel from nuclear reactors in the United States in the geological repository Yucca Mountain are: (1) Yucca Mountain is not designed to hold the amount of fuel that has been and is proposed to be generated in the next few decades, and (2) the radiotoxicity (i.e., biological hazard) of the waste (particularly the actinides) does not decrease below that of natural uranium ore for hundreds of thousands of years. One solution to these problems may be to use transmutation to convert the nuclides in spent nuclear fuel to ones with shorter half-lives. Both reactor and accelerator-based systems have been examined in the past for transmutation; there are advantages and disadvantages associated with each. By using existing Light Water Reactors (LWRs) to burn a majority of the plutonium in spent nuclear fuel and Accelerator-Driven Systems (ADSs) to transmute the remainder of the actinides, the benefits of each type of system can be realized. The transmutation process then becomes more efficient and less expensive. This research searched for the best combination of LWRs with multiple recycling of plutonium and ADSs to transmute spent nuclear fuel from past and projected nuclear activities (assuming little growth of nuclear energy). The neutronic design of each system is examined in detail although thermal hydraulic performance would have to be considered before a final system is designed. The results are obtained using the Monte Carlo burnup code Monteburns, which has been successfully benchmarked for MOX fuel irradiation and compared to other codes for ADS calculations. The best combination of systems found in this research includes 41 LWRs burning mixed oxide fuel with two recycles of plutonium ({approx}40 years operation each) and 53 ADSs to transmute the remainder of the actinides from spent nuclear fuel over the course of 60 years of operation.

  8. THE IEEE FOURTH INTERNATIONAL CONFERENCE ON INTELLIGENT TRANSPORTATION SYSTEMS 1 Space Division Multiple Access (SDMA) for Robust

    E-Print Network [OSTI]

    Varaiya, Pravin

    in enhancing safety but also in vehicle automation. V2V communica- tion is a key element in vehicle automation. A vehicle in automated highway systems (AHS) [1] communicates with neighboring vehicles to exchange vehicle control data [2], [3], [4]. As a result, automated vehicles interact safely. V2V communication is likely

  9. The design and performance of a water cooling system for a prototype coupled cavity linear particle accelerator for the spallation neutron source

    SciTech Connect (OSTI)

    Bernardin, J. D. (John D.); Ammerman, C. N. (Curtt N.); Hopkins, S. M. (Steve M.)

    2002-01-01T23:59:59.000Z

    The Spallation Neutron Source (SNS) is a facility being designed for scientific and industrial research and development. The SNS will generate and employ neutrons as a research tool in a variety of disciplines including biology, material science, superconductivity, chemistry, etc. The neutrons will be produced by bombarding a heavy metal target with a high-energy beam of protons, generated and accelerated with a linear particle accelerator, or linac. The low energy end of the linac consists of, in part, a multi-cell copper structure termed a coupled cavity linac (CCL). The CCL is responsible for accelerating the protons from an energy of 87 MeV, to 185 MeV. Acceleration of the charged protons is achieved by the use of large electrical field gradients established within specially designed contoured cavities of the CCL. While a large amount of the electrical energy is used to accelerate the protons, approximately 60-80% of this electrical energy is dissipated in the CCL's copper structure. To maintain an acceptable operating temperature, as well as minimize thermal stresses and maintain desired contours of the accelerator cavities, the electrical waste heat must be removed from the CCL structure. This is done using specially designed water cooling passages within the linac's copper structure. Cooling water is supplied to these cooling passages by a complex water cooling and temperature control system. This paper discusses the design, analysis, and testing of a water cooling system for a prototype CCL. First, the design concept and method of water temperature control is discussed. Second, the layout of the prototype water cooling system, including the selection of plumbing components, instrumentation, as well as controller hardware and software is presented. Next, the development of a numerical network model used to size the pump, heat exchanger, and plumbing equipment, is discussed. Finally, empirical pressure, flow rate, and temperature data from the prototype CCL water cooling tests are used to assess water cooling system performance and numerical modeling accuracy.

  10. Accelerating value capture of SAP enterprise resource planning (ERP) system : governance model and process

    E-Print Network [OSTI]

    Shih, Ting-Chih

    2009-01-01T23:59:59.000Z

    Raytheon produces a diverse range of defense products using a wide range of business systems and tools that are not currently integrated. To achieve the corporate vision of "one company", in 2005, Raytheon began to deploy ...

  11. OPERATING EXPERIENCE WITH A NEW ACCELERATOR CONTROL SYSTEM BASED UPON MICROPROCESSORS

    E-Print Network [OSTI]

    Magyary, S.

    2010-01-01T23:59:59.000Z

    control system compo­ nents such as multiplexors, timing modules, and graphicsCONTROL " ~ FROM DMM VECTOR VOLTAGES il l ENABLE SCOPE 1 HP 1350A GRAPHICScontrol. These signals are added to the output of the graphics

  12. Experimental study on the thorium-loaded accelerator-driven system at the Kyoto Univ. critical assembly

    SciTech Connect (OSTI)

    Pyeon, C. H.; Yagi, T.; Lim, J. Y.; Misawa, T. [Nuclear Science Engineering Div., Research Reactor Inst., Kyoto Univ., Asashiro-nishi, Kumatori-cho, Sennan-gun, Osaka 590-0494 (Japan)

    2012-07-01T23:59:59.000Z

    The experimental study on the thorium-loaded accelerator-driven system (ADS) is conducted in the Kyoto Univ. Critical Assembly (KUCA). The experiments are carried out in both the critical and subcritical states for attaining the reaction rates of the thorium capture and fission reactions. In the critical system, the thorium plate irradiation experiment is carried out for the thorium capture and fission reactions. From the results of the measurements, the thorium fission reactions are obtained apparently in the critical system, and the C/E values of reaction rates show the accuracy of relative difference of about 30%. In the ADS experiments with 14 MeV neutrons and 100 MeV protons, the subcritical experiments are carried out in the thorium-loaded cores to obtain the capture reaction rates through the measurements of {sup 115}In(n, {gamma}){sup 116m}In reactions. The results of the experiments reveal the difference between the reaction rate distributions for the change in not only the neutron spectrum but also the external neutron source. The comparison between the measured and calculated reaction rate distributions demonstrates a discrepancy of the accuracy of reaction rate analyses of thorium capture reactions through the thorium-loaded ADS experiments with 14 MeV neutrons. Hereafter, kinetic experiments are planned to be carried out to deduce the delayed neutron decay constants and subcriticality using the pulsed neutron method. (authors)

  13. Vehicle Technologies Office Merit Review 2014: Accelerating the Evaluation and Market Introduction of Advanced Technologies Through Model Based System Engineering

    Broader source: Energy.gov [DOE]

    Presentation given by Argonne National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about accelerating the...

  14. Vehicle Technologies Office Merit Review 2015: Accelerate the Development and Introduction of Advanced Technologies Through Model Based System Engineering

    Broader source: Energy.gov [DOE]

    Presentation given by Argonne National Laboratory at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about accelerate the...

  15. Accelerate Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Accelerate Energy Productivity 2030 Over the next year, the U.S. Department of Energy, the Council on Competitiveness and the Alliance to Save Energy will join forces to undertake...

  16. Instrumentation and Controls Division Progress Report for the Period of July 1, 1994 to December 31, 1997: Publications, Presentations, Activities, and Awards

    SciTech Connect (OSTI)

    McDonald, D.W.

    1998-04-01T23:59:59.000Z

    This report contains a record of publishing and other activities in the Oak Ridge National Laboratory (ORNL) Instrumentation and Controls (I&C) Division for the period of July 1, 1994, to December31, 1997. It is a companion volume to Working Together on New Horizons: Instrumentation and Controls Division Progress Report for the Period of July 1, 1994, to December 31, 1997 (OR.NLA4-6530). Working Together on New Horizons contains illustrated summaries of some of the projects under way in I&C Division. Both books can be obtained by contacting C. R. Brittain (brittain@ornl. gov), P.O. Box 2008, Oak Ridge, TN 37831-6005. l&C Division Mission and Vision I&C Division develops and maintains techniques, instruments, and systems that lead to a better understanding of nature and harnessing of natural phenomena for the benefit of humankind. We have dedicated ourselves to accelerating the advancement of science and the transfer of those advancements into products and processes that benefit U.S. industry and enhance the security of our citizens.

  17. Energy Technology Division research summary -- 1994

    SciTech Connect (OSTI)

    Not Available

    1994-09-01T23:59:59.000Z

    Research funded primarily by the NRC is directed toward assessing the roles of cyclic fatigue, intergranular stress corrosion cracking, and irradiation-assisted stress corrosion cracking on failures in light water reactor (LWR) piping systems, pressure vessels, and various core components. In support of the fast reactor program, the Division has responsibility for fuel-performance modeling and irradiation testing. The Division has major responsibilities in several design areas of the proposed International Thermonuclear Experimental Reactor (ITER). The Division supports the DOE in ensuring safe shipment of nuclear materials by providing extensive review of the Safety Analysis Reports for Packaging (SARPs). Finally, in the nuclear area they are investigating the safe disposal of spent fuel and waste. In work funded by DOE`s Energy Efficiency and Renewable Energy, the high-temperature superconductivity program continues to be a major focal point for industrial interactions. Coatings and lubricants developed in the division`s Tribology Section are intended for use in transportation systems of the future. Continuous fiber ceramic composites are being developed for high-performance heat engines. Nondestructive testing techniques are being developed to evaluate fiber distribution and to detect flaws. A wide variety of coatings for corrosion protection of metal alloys are being studied. These can increase lifetimes significant in a wide variety of coal combustion and gasification environments.

  18. Muon Acceleration - RLA and FFAG

    SciTech Connect (OSTI)

    Alex Bogacz

    2011-10-01T23:59:59.000Z

    Various acceleration schemes for muons are presented. The overall goal of the acceleration systems: large acceptance acceleration to 25 GeV and 'beam shaping' can be accomplished by various fixed field accelerators at different stages. They involve three superconducting linacs: a single pass linear Pre-accelerator followed by a pair of multi-pass Recirculating Linear Accelerators (RLA) and finally a non-scaling FFAG ring. The present baseline acceleration scenario has been optimized to take maximum advantage of appropriate acceleration scheme at a given stage. The solenoid based Pre-accelerator offers very large acceptance and facilitates correction of energy gain across the bunch and significant longitudinal compression trough induced synchrotron motion. However, far off-crest acceleration reduces the effective acceleration gradient and adds complexity through the requirement of individual RF phase control for each cavity. The RLAs offer very efficient usage of high gradient superconducting RF and ability to adjust path-length after each linac pass through individual return arcs with uniformly periodic FODO optics suitable for chromatic compensation of emittance dilution with sextupoles. However, they require spreaders/recombiners switchyards at both linac ends and significant total length of the arcs. The non-scaling Fixed Field Alternating Gradient (FFAG) ring combines compactness with very large chromatic acceptance (twice the injection energy) and it allows for large number of passes through the RF (at least eight, possibly as high as 15).

  19. Southwest Research Institute Signal Exploitation and Geolocation Division

    E-Print Network [OSTI]

    Chapman, Clark R.

    Southwest Research Institute ® Signal Exploitation and Geolocation Division CERTIFIED TO ISO 9001:2008 BY LLOYD'S REGISTER QUALITY ASSURANCE APRIL 1, 2012 CERTIFICATE NUMBER: UQA 0111601 ISO 9001:2008 Quality to have the division quality management system certified to the stringent quality standards of ISO 9001

  20. Chemistry Division Department of Biological

    E-Print Network [OSTI]

    Heller, Barbara

    1 Chemistry Division Department of Biological and Chemical Sciences, Illinois Institute-13 Chemistry Division invites nominations for Kilpatrick Fellowship for the academic year 2012's Chemistry Department from 1947­1960. Mary Kilpatrick was a chemistry faculty member from 1947

  1. Lectures on Linear Algebra over Division Ring

    E-Print Network [OSTI]

    Aleks Kleyn

    2014-10-11T23:59:59.000Z

    In this book i treat linear algebra over division ring. A system of linear equations over a division ring has properties similar to properties of a system of linear equations over a field. However, noncommutativity of a product creates a new picture. Matrices allow two products linked by transpose. Biring is algebra which defines on the set two correlated structures of the ring. As in the commutative case, solutions of a system of linear equations build up right or left vector space depending on type of system. We study vector spaces together with the system of linear equations because their properties have a close relationship. As in a commutative case, the group of automorphisms of a vector space has a single transitive representation on a frame manifold. This gives us an opportunity to introduce passive and active representations. Studying a vector space over a division ring uncovers new details in the relationship between passive and active transformations, makes this picture clearer. Considering of twin representations of division ring in Abelian group leads to the concept of D vector space and their linear map. Based on polyadditive map I considered definition of tensor product of rings and tensor product of D vector spaces.

  2. Solid State Division

    SciTech Connect (OSTI)

    Green, P.H.; Watson, D.M. (eds.)

    1989-08-01T23:59:59.000Z

    This report contains brief discussions on work done in the Solid State Division of Oak Ridge National Laboratory. The topics covered are: Theoretical Solid State Physics; Neutron scattering; Physical properties of materials; The synthesis and characterization of materials; Ion beam and laser processing; and Structure of solids and surfaces. (LSP)

  3. Acceleration Fund

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProducts (VAP) VAP7-0973 1 Introduction In theACME - AcceleratedAccelerating

  4. Security Division 2007 Annual Report

    E-Print Network [OSTI]

    Computer Security Division 2007 Annual Report #12;TAble of ConTenTS Welcome Division Organization The Computer Security Division Responds to the Federal Information Security Management Act of 2002 Security Information Technology 15 Security Testing and Metrics 17 Validation Programs and Laboratory Accreditation 17

  5. Physics division annual report 2005.

    SciTech Connect (OSTI)

    Glover, J.; Physics

    2007-03-12T23:59:59.000Z

    This report highlights the research performed in 2005 in the Physics Division of Argonne National Laboratory. The Division's programs include operation of ATLAS as a national user facility, nuclear structure and reaction research, nuclear theory, medium energy nuclear research and accelerator research and development. The mission of Nuclear Physics is to understand the origin, evolution and structure of baryonic matter in the universe--the matter that makes up stars, planets and human life itself. The Division's research focuses on innovative new ways to address this mission and 2005 was a year of great progress. One of the most exciting developments is the initiation of the Californium Rare Ion Breeder Upgrade, CARIBU. By combining a Cf-252 fission source, the gas catcher technology developed for rare isotope beams, a high-resolution isobar separator, and charge breeding ECR technology, CARIBU will make hundreds of new neutron-rich isotope beams available for research. The cover illustration shows the anticipated intensities of low-energy beams that become available for low-energy experiments and for injection into ATLAS for reacceleration. CARIBU will be completed in early 2009 and provide us with considerable experience in many of the technologies developed for a future high intensity exotic beam facility. Notable results in research at ATLAS include a measurement of the isomeric states in {sup 252}No that helps pin down the single particle structure expected for superheavy elements, and a new low-background measurement of {sup 16}N beta-decay to determine the {sup 12}C({alpha},{gamma}){sup 16}O reaction rate that is so important in astrophysical environments. Precise mass measurements shed new light on the unitarity of the quark weak-mixing matrix in the search for physics beyond the standard model. ATLAS operated for 4686 hours of research in FY2005 while achieving 95% efficiency of beam delivery for experiments. In Medium-Energy Physics, radium isotopes were trapped in an atom trap for the first time, a major milestone in an innovative search for the violation of time-reversal symmetry. New results from HERMES establish that strange quarks carry little of the spin of the proton and precise results have been obtained at JLAB on the changes in quark distributions in light nuclei. New theoretical results reveal that the nature of the surfaces of strange quark stars. Green's function Monte Carlo techniques have been extended to scattering problems and show great promise for the accurate calculation, from first principles, of important astrophysical reactions. Flame propagation in type 1A supernova has been simulated, a numerical process that requires considering length scales that vary by factors of eight to twelve orders of magnitude. Argonne continues to lead in the development and exploitation of the new technical concepts that will truly make an advanced exotic beam facility, in the words of NSAC, 'the world-leading facility for research in nuclear structure and nuclear astrophysics'. Our science and our technology continue to point the way to this major advance. It is a tremendously exciting time in science for these new capabilities hold the keys to unlocking important secrets of nature. The great progress that has been made in meeting the exciting intellectual challenges of modern nuclear physics reflects the talents and dedication of the Physics Division staff and the visitors, guests and students who bring so much to the research.

  6. Computer, Computational, and Statistical Sciences Division

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computing CCS Division Computer, Computational, and Statistical Sciences Division Computational physics, computer science, applied mathematics, statistics and the integration of...

  7. Test Facility Daniil Stolyarov, Accelerator Test Facility User...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Development of the Solid-State Laser System for the Accelerator Test Facility Daniil Stolyarov, Accelerator Test Facility User's Meeting April 3, 2009 Outline Motivation for...

  8. Division of Human Resources Payroll Certification Process

    E-Print Network [OSTI]

    Meyers, Steven D.

    Division of Human Resources Payroll Certification Process Questions (813) 974-7955 Payroll/Payroll Processing Rev. 04/2010 Payroll Certification is the process by which departments submit to Payroll the hours to be paid for each employee within each department. This process utilizes the online Certification System

  9. Plasma accelerator

    DOE Patents [OSTI]

    Wang, Zhehui (Los Alamos, NM); Barnes, Cris W. (Santa Fe, NM)

    2002-01-01T23:59:59.000Z

    There has been invented an apparatus for acceleration of a plasma having coaxially positioned, constant diameter, cylindrical electrodes which are modified to converge (for a positive polarity inner electrode and a negatively charged outer electrode) at the plasma output end of the annulus between the electrodes to achieve improved particle flux per unit of power.

  10. Argonne Physics Division - ATLAS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CARIBU Beam Yields for Representative Species Updated July, 2009 Typical CARIBU intensities for low-energy (stopped) and accelerated beams for the three 252Cf sources that will be...

  11. 2004 Conference on Information Sciences and Systems, Princeton University, March 1719, 2004 Monetary Cost and Energy Use Optimization in Divisible Load

    E-Print Network [OSTI]

    Robertazzi, Thomas G.

    , we study the monetary cost and energy opti- mization of a single level tree network by using various is discussed. The mathematical analysis of the monetary cost and energy use in single level tree networks Monetary Cost and Energy Use Optimization in Divisible Load Processing Mequanint A. Moges, Leonardo A

  12. GENERAL DYNAMICS Space Systems Division

    E-Print Network [OSTI]

    .A. Abdou, UCLA D.E. Baldwin, LLNL K.H. Berkner, LBNL L.A. Berry, ORNL F.L. Culler, EPRI S.O. Dean, FPA D

  13. GENERAL DYNAMICS Space Systems Division

    E-Print Network [OSTI]

    "fusion nuclear engineering problems will be pushed past the retirement and even lifetimes of the individualsnow and other "in-vessel"components such as PFCs. Successin obtainingreactor- grade plasmas and their control can build a much smallerdriven tokamak for the essential and parallel development and testing

  14. GENERAL DYNAMICS Space Systems Division

    E-Print Network [OSTI]

    to any kind of a competitive commercialpower plant. Such a plant was to be theobjectiveaccording tothe and waste disposalproblems)and solar(which is costly at the present time). My staff has shownme designs of the new passively safenuclearplants and of solar electricplants, and it sccms to me that these, on p a p

  15. Systems Division NO. RIY. NO,

    E-Print Network [OSTI]

    Rathbun, Julie A.

    . The upper and lower curves show the ±5o/o limits on the output power which is approximately the variation expected from seasonal solar radiation variations. POWER MANAGEMENT Calculations were made of reserve power power limits from Figure 2 are shown as vertical lines at 34 and 48 watts. The nominal output at lunar

  16. Thomas Precession by Uniform Acceleration

    E-Print Network [OSTI]

    Miroslav Pardy

    2014-12-09T23:59:59.000Z

    We determine the nonlinear transformations between coordinate systems which are mutually in a constant symmetrical accelerated motion. The maximal acceleration limit follows from the kinematical origin and it is an analogue of the maximal velocity in special relativity. We derive the dependence of mass, length, time, Doppler effect, Cherenkov effect and transition radiation angle on acceleration as an analogue phenomena in special theory of relativity. The last application of our method is the Thomas precession by uniform acceleration with the possible role in the modern physics and cosmology. The comparison of derived results with other relativistic methods is necessary.

  17. Compact accelerator for medical therapy

    DOE Patents [OSTI]

    Caporaso, George J.; Chen, Yu-Jiuan; Hawkins, Steven A.; Sampayan, Stephen E.; Paul, Arthur C.

    2010-05-04T23:59:59.000Z

    A compact accelerator system having an integrated particle generator-linear accelerator with a compact, small-scale construction capable of producing an energetic (.about.70-250 MeV) proton beam or other nuclei and transporting the beam direction to a medical therapy patient without the need for bending magnets or other hardware often required for remote beam transport. The integrated particle generator-accelerator is actuable as a unitary body on a support structure to enable scanning of a particle beam by direction actuation of the particle generator-accelerator.

  18. Thomas Precession by Uniform Acceleration

    E-Print Network [OSTI]

    Pardy, Miroslav

    2015-01-01T23:59:59.000Z

    We determine the nonlinear transformations between coordinate systems which are mutually in a constant symmetrical accelerated motion. The maximal acceleration limit follows from the kinematical origin and it is an analogue of the maximal velocity in special relativity. We derive the dependence of mass, length, time, Doppler effect, Cherenkov effect and transition radiation angle on acceleration as an analogue phenomena in special theory of relativity. The last application of our method is the Thomas precession by uniform acceleration with the possible role in the modern physics and cosmology. The comparison of derived results with other relativistic methods is necessary.

  19. Technology & Engineering Division 1DAQ for BNL 15 T Pulsed Magnet

    E-Print Network [OSTI]

    McDonald, Kirk

    Technology & Engineering Division 1DAQ for BNL 15 T Pulsed Magnet DATA ACQUISITION FOR PRE and Fusion Center October 17 ­ 19, 2005 #12;Technology & Engineering Division 2DAQ for BNL 15 T Pulsed Magnet & Engineering Division 4DAQ for BNL 15 T Pulsed Magnet Data Acquisition System Use 2 National Instrument NB

  20. DA NE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    sul piano orizzontale di simmetria a 3 cm dall'asse, sia a destra che a sinistra, in funzione della, definito come il valore del campo misurato diviso per la distanza dall'asse. Il punto di lavoro dei simmetria orizzontale lungo rette parallele all'asse del magnete, in 11 diverse posizioni spaziate di 10 mm

  1. DA!NE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    'ultima con del cianoacrilato. Il sistema di riferimento associato alle misure è così fatto: · asse x secondo la direzione ortogonale al pavimento; · asse y secondo la direzione principale della strumentazione (asse motore-encoder); · asse z ortogonale ai precedenti, in modo da ottenere una terna equiversa. 6

  2. DA NE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    of the Splitter Magnet, built by TESLA Engineering, Storrington (U.K.), was delivered to LNF on July 19, 1996. Due to summer holidays, the magnetic measurements and magnet characterization started beginning of September of the construction. In fact, there has not been any necessity of magnetic length adjustment, that means no machining

  3. DA!NE TECHNICAL NOTE INFN -LNF, Accelerator Division

    E-Print Network [OSTI]

    Istituto Nazionale di Fisica Nucleare (INFN)

    of the sensitivity to the mechanical deformations induced by the surface power loss on the metallic walls distribution inside the structure due respectively to radiation heat and electromagnetic power loss produced if the temperature profile in case of radiation heating is flatter than that induced by the rf-surface power loss

  4. Andrew Hutton Named Head of Jefferson Lab's Accelerator Division |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProductsAlternative FuelsSanta3 Table 3. SummaryAncientAndrea

  5. MUON ACCELERATION

    SciTech Connect (OSTI)

    BERG,S.J.

    2003-11-18T23:59:59.000Z

    One of the major motivations driving recent interest in FFAGs is their use for the cost-effective acceleration of muons. This paper summarizes the progress in this area that was achieved leading up to and at the FFAG workshop at KEK from July 7-12, 2003. Much of the relevant background and references are also given here, to give a context to the progress we have made.

  6. Accelerating into the Future Zero to 1GeV in a Few Centimeters

    ScienceCinema (OSTI)

    LBNL

    2009-09-01T23:59:59.000Z

    July 8, 2008 Berkeley Lab lecture: By exciting electric fields in plasma-based waveguides, lasers accelerate electrons in a fraction of the distance conventional accelerators require. The Accelerator and Fusion Research Division's LOASIS program, headed by Wim Leemans, has used 40-trillion-watt laser pulses to deliver billion-electron-volt (1 GeV) electron beams within centimeters. Leemans looks ahead to BELLA, 10-GeV accelerating modules that could power a future linear collider.

  7. Acceleration of dormant storage effects to address the reliability of silicon surface micromachined Micro-Electro-Mechanical Systems (MEMS).

    SciTech Connect (OSTI)

    Cox, James V.; Candelaria, Sam A.; Dugger, Michael Thomas; Duesterhaus, Michelle Ann; Tanner, Danelle Mary; Timpe, Shannon J.; Ohlhausen, James Anthony; Skousen, Troy J.; Jenkins, Mark W.; Jokiel, Bernhard, Jr.; Walraven, Jeremy Allen; Parson, Ted Blair

    2006-06-01T23:59:59.000Z

    Qualification of microsystems for weapon applications is critically dependent on our ability to build confidence in their performance, by predicting the evolution of their behavior over time in the stockpile. The objective of this work was to accelerate aging mechanisms operative in surface micromachined silicon microelectromechanical systems (MEMS) with contacting surfaces that are stored for many years prior to use, to determine the effects of aging on reliability, and relate those effects to changes in the behavior of interfaces. Hence the main focus was on 'dormant' storage effects on the reliability of devices having mechanical contacts, the first time they must move. A large number ({approx}1000) of modules containing prototype devices and diagnostic structures were packaged using the best available processes for simple electromechanical devices. The packaging processes evolved during the project to better protect surfaces from exposure to contaminants and water vapor. Packages were subjected to accelerated aging and stress tests to explore dormancy and operational environment effects on reliability and performance. Functional tests and quantitative measurements of adhesion and friction demonstrated that the main failure mechanism during dormant storage is change in adhesion and friction, precipitated by loss of the fluorinated monolayer applied after fabrication. The data indicate that damage to the monolayer can occur at water vapor concentrations as low as 500 ppm inside the package. The most common type of failure was attributed to surfaces that were in direct contact during aging. The application of quantitative methods for monolayer lubricant analysis showed that even though the coverage of vapor-deposited monolayers is generally very uniform, even on hidden surfaces, locations of intimate contact can be significantly depleted in initial concentration of lubricating molecules. These areas represent defects in the film prone to adsorption of water or contaminants that can cause movable structures to adhere. These analysis methods also indicated significant variability in the coverage of lubricating molecules from one coating process to another, even for identical processing conditions. The variability was due to residual molecules left in the deposition chamber after incomplete cleaning. The coating process was modified to result in improved uniformity and total coverage. Still, a direct correlation was found between the resulting static friction behavior of MEMS interfaces, and the absolute monolayer coverage. While experimental results indicated that many devices would fail to start after aging, the modeling approach used here predicted that all the devices should start. Adhesion modeling based upon values of adhesion energy from cantilever beams is therefore inadequate. Material deposition that bridged gaps was observed in some devices, and potentially inhibits start-up more than the adhesion model indicates. Advances were made in our ability to model MEMS devices, but additional combined experimental-modeling studies will be needed to advance the work to a point of providing predictive capability. The methodology developed here should prove useful in future assessments of device aging, however. Namely, it consisted of measuring interface properties, determining how they change with time, developing a model of device behavior incorporating interface behavior, and then using the age-aware interface behavior model to predict device function.

  8. Energy Research and Development Division FINAL PROJECT REPORT

    E-Print Network [OSTI]

    CEC5002013042 Prepared for: California Energy Commission Prepared by: Lawrence Berkeley National · EnergyRelated Environmental Research · Energy Systems Integration · Environmentally Preferred Advanced. The information from this project contributes to Energy Research and Development Division's Buildings End

  9. Energy Research and Development Division FINAL PROJECT REPORT

    E-Print Network [OSTI]

    Energy Research and Development Division FINAL PROJECT REPORT PLANNING ALTERNATIVE5002013021 Prepared for: California Energy Commission Prepared by: Facet Decision Systems, Inc. #12-08-030 Prepared for: California Energy Commission Linda Spiegel Contract Manager Linda Spiegel Office Manager

  10. Energy Research and Development Division FINAL PROJECT REPORT

    E-Print Network [OSTI]

    Energy Research and Development Division FINAL PROJECT REPORT ENERGY for: California Energy Commission Prepared by: San Diego State Research Foundation #12: California Energy Commission Raquel Kravitz Program Manager Fernando Pina Office Manager Energy Systems

  11. Energy Research and Development Division FINAL PROJECT REPORT

    E-Print Network [OSTI]

    Energy Research and Development Division FINAL PROJECT REPORT ENERGY for: California Energy Commission Prepared by: San Diego State Research Foundation #12 Energy Commission Raquel E. Kravitz Program Manager Fernando Pina Office Manager Energy Systems Research

  12. Energy Research and Development Division FINAL PROJECT REPORT

    E-Print Network [OSTI]

    Energy Research and Development Division FINAL PROJECT REPORT LIGHTING CALIFORNIA'S FUTURE RetrofitIntegrated Classroom Lighting System (RICLS) Prepared for: California Energy Commission Managed by: Architectural Energy Corporation Prepared by: Finelite Inc. FEBRUARY 2013 CEC

  13. RIKEN Center for Emergent Matter Science Strong Correlation Physics Division

    E-Print Network [OSTI]

    Fukai, Tomoki

    Device Research Team Emergent Soft Matter Structure Reserch Team Emergent Functional Polymers Research Information Electronics Division Quantum Functional System Research Group Quantum Optics Research Group Quantum Electronics Research Team Emergent Phenomena Observation Technology Research Team Quantum Nano

  14. Accelerators and the Accelerator Community

    SciTech Connect (OSTI)

    Malamud, Ernest; Sessler, Andrew

    2008-06-01T23:59:59.000Z

    In this paper, standing back--looking from afar--and adopting a historical perspective, the field of accelerator science is examined. How it grew, what are the forces that made it what it is, where it is now, and what it is likely to be in the future are the subjects explored. Clearly, a great deal of personal opinion is invoked in this process.

  15. Energy Division progress report, fiscal years 1994--1995

    SciTech Connect (OSTI)

    Moser, C.I. [ed.

    1996-06-01T23:59:59.000Z

    At ORNL, the Energy Division`s mission is to provide innovative solutions to energy and related issues of national and global importance through interdisciplinary research and development. Its goals and accomplishments are described in this progress report for FY 1994 and FY 1995. The Division`s expenditures in FY 1995 totaled 44.9 million. Sixty percent of the divisions work was supported by the US DOE. Other significant sponsors include the US DOT, the US DOD, other federal agencies, and some private organizations. The Division`s programmatic activities cover three main areas: (1) analysis and assessment, (2) transportation systems, and (3) energy use and delivery technologies. Analysis and assessment activities involve energy and resource analysis, preparation of environmental assessments and impact statements, and impact statements, research on emergency preparedness, analysis of energy and environmental needs in developing countries, and transportation analysis. Transportation systems research seeks to improve the quality of both civilian and military transportation efforts. Energy use and delivery technologies focus on building equipment, building envelopes, (walls, roofs, attics, and materials), improvement of energy efficiency in buildings, and electric power systems.

  16. Frequency Interpolation Methods for Accelerating Parallel EMC Analysis Secure Computing Laboratory, Computer System Laboratories, Fujitsu Laboratories Ltd

    E-Print Network [OSTI]

    Strazdins, Peter

    Frequency Interpolation Methods for Accelerating Parallel EMC Analysis K. Homma Secure Computing-specific Electromagnetic Compatibility (EMC) re- quirements. Hence, minimizing the undesired radiation and avoiding electromagnetic wave radiation from these devices tends to increase. In such a situation, the estimation of EMC

  17. Peculiar acceleration

    E-Print Network [OSTI]

    Luca Amendola; Claudia Quercellini; Amedeo Balbi

    2007-08-08T23:59:59.000Z

    It has been proposed recently to observe the change in cosmological redshift of distant galaxies or quasars with the next generation of large telescope and ultra-stable spectrographs (the so-called Sandage-Loeb test). Here we investigate the possibility of observing the change in peculiar velocity in nearby clusters and galaxies. This ``peculiar acceleration'' could help reconstructing the gravitational potential without assuming virialization. We show that the expected effect is of the same order of magnitude of the cosmological velocity shift. Finally, we discuss how to convert the theoretical predictions into quantities directly related to observations.

  18. ACCELERATE ENERGY

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015ofDepartmentDepartment of Energy ThisThistheSummaryACCELERATE ENERGY

  19. Linear Accelerator

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |Is Your HomeLatestCenter (LMI-EFRC) -Choices toLeeLinear Accelerator

  20. Mission | APS Engineering Support Division

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    APS Engineering Support Division (AES) Search Button About Welcome Overview Visiting the APS Mission & Goals Find People Organization Charts Committees Job Openings User...

  1. Earth Sciences Division annual report 1990

    SciTech Connect (OSTI)

    NONE

    1991-06-01T23:59:59.000Z

    This Annual Report presents summaries of selected representative research activities grouped according to the principal disciplines of the Earth Sciences Division: Reservoir Engineering and Hydrogeology, Geology and Geochemistry, and Geophysics and Geomechanics. Much of the Division`s research deals with the physical and chemical properties and processes in the earth`s crust, from the partially saturated, low-temperature near-surface environment to the high-temperature environments characteristic of regions where magmatic-hydrothermal processes are active. Strengths in laboratory and field instrumentation, numerical modeling, and in situ measurement allow study of the transport of mass and heat through geologic media -- studies that now include the appropriate chemical reactions and the hydraulic-mechanical complexities of fractured rock systems. Of particular note are three major Division efforts addressing problems in the discovery and recovery of petroleum, the application of isotope geochemistry to the study of geodynamic processes and earth history, and the development of borehole methods for high-resolution imaging of the subsurface using seismic and electromagnetic waves. In 1989 a major DOE-wide effort was launched in the areas of Environmental Restoration and Waste Management. Many of the methods previously developed for and applied to deeper regions of the earth will in the coming years be turned toward process definition and characterization of the very shallow subsurface, where man-induced contaminants now intrude and where remedial action is required.

  2. High Energy Physics Division semiannual report of research activities, July 1, 1990--December 31, 1990

    SciTech Connect (OSTI)

    Berger, E.; Moonier, P.; May, E.; Norem, J. (eds.)

    1991-02-01T23:59:59.000Z

    A report is presented of research and development activities conducted in the High Energy Physics Division at Argonne National Laboratory during the six month period July 1 through December 31, 1990. Analyses of data from experiments performed by members of the Division are summarized, and the status of experiments taking data and of those being prepared is reviewed. Descriptions are included of research on theoretical and phenomenological topics in particle physics. Progress reports are provided on accelerator research and development, detector research and development, and experimental facilities research. Lists are presented of publications, of colloquia and conference talks, and of significant external community activities of members of the Division.

  3. Engineering Physics and Mathematics Division progress report for period ending September 30, 1987

    SciTech Connect (OSTI)

    Not Available

    1987-12-01T23:59:59.000Z

    This report provides an archival record of the activities of the Engineering Physics and Mathematics Division during the period June 30, 1985 through September 30, 1987. Work in Mathematical Sciences continues to include applied mathematics research, statistics research, and computer science. Nuclear-data measurements and evaluations continue for fusion reactors, fission reactors, and other nuclear systems. Also discussed are long-standing studies of fission-reactor shields through experiments and related analysis, of accelerator shielding, and of fusion-reactor neutronics. Work in Machine Intelligence continues to feature the development of an autonomous robot. The last descriptive part of this report reflects the work in our Engineering Physics Information Center, which again concentrates primarily upon radiation-shielding methods and related data.

  4. PART III DIVISION 13 PAGE 1 RUTGERS DESIGN STANDARDS MANUAL NOV 2008 DIVISION 13 SPECIAL CONSTRUCTION

    E-Print Network [OSTI]

    operating condition. The system #12;PART III DIVISION 13 PAGE 2 RUTGERS DESIGN STANDARDS MANUAL NOV 2008 detail battery calculations per NFPA 72. 4. Indicate all A/C, fans, Dampers to be monitored by fire alarm detailed battery calculations per the

  5. Solar Energy Program: Chapter from the Energy and Environmental Division Annual Report 1980

    E-Print Network [OSTI]

    Energy and Environment Division

    1981-01-01T23:59:59.000Z

    SOLAR ENERGY PROGRAM PERSONNEL Small Particle SuspensionsStrategies for Active Solar Energy Systems M. Warren, S.ENVIRONMENT DIVISION I SOLAR ENERGY PROGRAM Chapter from t h

  6. Linear induction accelerator

    DOE Patents [OSTI]

    Buttram, M.T.; Ginn, J.W.

    1988-06-21T23:59:59.000Z

    A linear induction accelerator includes a plurality of adder cavities arranged in a series and provided in a structure which is evacuated so that a vacuum inductance is provided between each adder cavity and the structure. An energy storage system for the adder cavities includes a pulsed current source and a respective plurality of bipolar converting networks connected thereto. The bipolar high-voltage, high-repetition-rate square pulse train sets and resets the cavities. 4 figs.

  7. Sandia National Laboratories: accelerate hydrogen infrastructure...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    accelerate hydrogen infrastructure technologies Energy Department Awards 7M to Advance Hydrogen Storage Systems On June 12, 2014, in CRF, Energy, Energy Storage, Energy Storage...

  8. Sandia National Laboratories: accelerated lifetime testing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    accelerated lifetime testing Sandia Solar Energy Test System Cited in National Engineering Competition On May 16, 2013, in Concentrating Solar Power, Energy, Energy Storage,...

  9. Physics Division progress report for period ending September 30, 1988

    SciTech Connect (OSTI)

    Livingston, A.B. (ed.)

    1989-03-01T23:59:59.000Z

    This report covers the research and development activities of the Physics Division for the 1988 fiscal year, beginning October 1, 1987, and ending September 30, 1988. The activities of this Division are concentrated in the areas of experimental nuclear physics, experimental atomic physics, and theoretical nuclear and atomic physics. Operation of the Holifield Heavy Ion Research Facility as a national user facility continues to represent the single largest activity within the Division. This year saw the completion of the acceleration tube upgrade of the 25-MV tandem electrostatic accelerator and the achievement of record terminal potentials, operation for an experiment with 25 million volts on terminal, and successful tests with beam at 25.5 MV. The experimental nuclear physics program continues to be dominated by research utilizing heavy ions. These activities, while continuing to center largely on the Holifield Facility, have seen significant growth in the use of facilities that provide intermediate energies and especially ultrarelativistic beams. The UNISOR program, since its inception, has been intimately associated with the Division and, most particularly, with the Holifield Facility. In addition to the Holifield Facility, the Division operates two smaller facilities, the EN Tandem and the ECR Ion Source Facility, as ''User Resources.'' The efforts in theoretical physics, covering both nuclear and atomic physics, are presented. In addition to research with multicharged heavy ions from the ECR source, the effort on atomic physics in support of the controlled fusion program includes a plasma diagnostics development program. The concentration of this program on optical and laser technology is marked by the change in designation to the Laser and Electro-Optics Lab. A small, continuing effort in elementary particle physics, carried out in collaboration with the University of Tennessee, is reported.

  10. accelerator-driven targets understanding: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The accelerator-driven system (ADS) is recognized Haviland, David 3 Thorium as a Fuel for Accelerator Driven Subcritical Electronuclear Systems CERN Preprints Summary:...

  11. ENERGY & ENVIRONMENT DIVISION ANNUAL REPORT 1979

    E-Print Network [OSTI]

    Cairns, E.J.

    2010-01-01T23:59:59.000Z

    Population Impacts of Geothermal Energy Development in thethe DOE Division of Geothermal Energy. S. L. Phillips and E.to DOE Division of Geothermal Energy, January 30, 1980.

  12. EARTH SCIENCES DIVISION ANNUAL REPORT 1978

    E-Print Network [OSTI]

    Authors, Various

    2012-01-01T23:59:59.000Z

    of Energy's Division of Geothermal Energy has undertaken aand Ghormley, E. L. , 1976. Geothermal energy conversion andof the Division of Geothermal Energy, and is compatible with

  13. A Wire Position Monitor System for the 1.3 FHZ Tesla-Style Cryomodule at the Fermilab New-Muon-Lab Accelerator

    SciTech Connect (OSTI)

    Eddy, N.; Fellenz, B.; Prieto, P.; Semenov, A.; Voy, D.C.; Wendt, M.; /Fermilab

    2011-08-17T23:59:59.000Z

    The first cryomodule for the beam test facility at the Fermilab New-Muon-Lab building is currently under RF commissioning. Among other diagnostics systems, the transverse position of the helium gas return pipe with the connected 1.3 GHz SRF accelerating cavities is measured along the {approx}15 m long module using a stretched-wire position monitoring system. An overview of the wire position monitor system technology is given, along with preliminary results taken at the initial module cooldown, and during further testing. As the measurement system offers a high resolution, we also discuss options for use as a vibration detector. An electron beam test facility, based on superconducting RF (SRF) TESLA-style cryomodules is currently under construction at the Fermilab New-Muon-Lab (NML) building. The first, so-called type III+, cryomodule (CM-1), equipped with eight 1.3 GHz nine-cell accelerating cavities was recently cooled down to 2 K, and is currently under RF conditioning. The transverse alignment of the cavity string within the cryomodule is crucial for minimizing transverse kick and beam break-up effects, generated by the high-order dipole modes of misaligned accelerating structures. An optimum alignment can only be guaranteed during the assembly of the cavity string, i.e. at room temperatures. The final position of the cavities after cooldown is uncontrollable, and therefore unknown. A wire position monitoring system (WPM) can help to understand the transverse motion of the cavities during cooldown, their final location and the long term position stability after cryo-temperatures are settled, as well as the position reproducibility for several cold-warm cycles. It also may serve as vibration sensor, as the wire acts as a high-Q resonant detector for mechanical vibrations in the low-audio frequency range. The WPM system consists out of a stretched-wire position detection system, provided with help of INFN-Milano and DESY Hamburg, and RF generation and read-out electronics, developed at Fermilab.

  14. for sequence accelerators

    E-Print Network [OSTI]

    Zakharov, Vladimir

    Wynn's -algorithm for sequence accelerators using high precision arithmetic Rachel Baumann University of Arizona Wynn's -algorithm for sequence accelerators using high precision arithmetic Rachel Baumann University of Arizona April 17, 2012 #12;Wynn's -algorithm for sequence accelerators using high

  15. Chemical Technology Division annual technical report, 1994

    SciTech Connect (OSTI)

    NONE

    1995-06-01T23:59:59.000Z

    Highlights of the Chemical Technology (CMT) Division`s activities during 1994 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion; (3) methods for treatment of hazardous waste and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from waste streams, concentrating radioactive waste streams with advanced evaporator technology, and producing {sup 99}Mo from low-enriched uranium for medical applications; (6) electrometallurgical treatment of the many different types of spent nuclear fuel in storage at Department of Energy sites; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, molecular sieve structures, and impurities in scrap copper and steel; and the geochemical processes involved in mineral/fluid interfaces and water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  16. Chemical Technology Division, Annual technical report, 1991

    SciTech Connect (OSTI)

    Not Available

    1992-03-01T23:59:59.000Z

    Highlights of the Chemical Technology (CMT) Division`s activities during 1991 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources; chemistry of superconducting oxides and other materials of interest with technological application; interfacial processes of importance to corrosion science, catalysis, and high-temperature superconductivity; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  17. Chemical Technology Division. Annual technical report, 1995

    SciTech Connect (OSTI)

    Laidler, J.J.; Myles, K.M.; Green, D.W.; McPheeters, C.C.

    1996-06-01T23:59:59.000Z

    Highlights of the Chemical Technology (CMT) Division`s activities during 1995 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) methods for treatment of hazardous waste and mixed hazardous/radioactive waste; (3) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (4) processes for separating and recovering selected elements from waste streams, concentrating low-level radioactive waste streams with advanced evaporator technology, and producing {sup 99}Mo from low-enriched uranium; (5) electrometallurgical treatment of different types of spent nuclear fuel in storage at Department of Energy sites; and (6) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems.

  18. Multiorbit induction accelerators

    SciTech Connect (OSTI)

    Zvontsov, A.A.; Kas'yanov, V.A.; Chakhlov, V.L.

    1985-09-01T23:59:59.000Z

    Large numbers of particles accelerated per cycle are made possible by accelerating simultaneously in several equilibrium orbits in a single betatron structure. (AIP)

  19. Accelerating Into the Future: From 0 to GeV in a Few Centimeters (LBNL Summer Lecture Series)

    ScienceCinema (OSTI)

    Leemans, Wim [LOASIS Program, AFRD

    2011-04-28T23:59:59.000Z

    Summer Lecture Series 2008: By exciting electric fields in plasma-based waveguides, lasers accelerate electrons in a fraction of the distance conventional accelerators require. The Accelerator and Fusion Research Division's LOASIS program, headed by Wim Leemans, has used 40-trillion-watt laser pulses to deliver billion-electron-volt (1 GeV) electron beams within centimeters. Leemans looks ahead to BELLA, 10-GeV accelerating modules that could power a future linear collider.

  20. Weak-Chaos Ratchet Accelerator

    E-Print Network [OSTI]

    Itzhack Dana; Vladislav B. Roitberg

    2012-05-28T23:59:59.000Z

    Classical Hamiltonian systems with a mixed phase space and some asymmetry may exhibit chaotic ratchet effects. The most significant such effect is a directed momentum current or acceleration. In known model systems, this effect may arise only for sufficiently strong chaos. In this paper, a Hamiltonian ratchet accelerator is introduced, featuring a momentum current for arbitrarily weak chaos. The system is a realistic, generalized kicked rotor and is exactly solvable to some extent, leading to analytical expressions for the momentum current. While this current arises also for relatively strong chaos, the maximal current is shown to occur, at least in one case, precisely in a limit of arbitrarily weak chaos.

  1. Centralized digital control of accelerators

    SciTech Connect (OSTI)

    Melen, R.E.

    1983-09-01T23:59:59.000Z

    In contrasting the title of this paper with a second paper to be presented at this conference entitled Distributed Digital Control of Accelerators, a potential reader might be led to believe that this paper will focus on systems whose computing intelligence is centered in one or more computers in a centralized location. Instead, this paper will describe the architectural evolution of SLAC's computer based accelerator control systems with respect to the distribution of their intelligence. However, the use of the word centralized in the title is appropriate because these systems are based on the use of centralized large and computationally powerful processors that are typically supported by networks of smaller distributed processors.

  2. DIVISION 16 -ELECTRICAL 16000 GENERAL

    E-Print Network [OSTI]

    DIVISION 16 - ELECTRICAL _____________________________________________________________ 16000 GENERAL A. Design Considerations 1. All drawing, specifications and construction shall conform to the following: National Electrical Code National Electrical Safety Code National Fire Protection Association

  3. Lawrence Berkeley National Laboratory Engineering Division Office

    E-Print Network [OSTI]

    /4867399 DMAttia@lbl.gov Administrative Staff Glenda Fish Division Office Administrator 510/4867123 GJFish

  4. Accelerator technology program. Progress report, January-June 1981

    SciTech Connect (OSTI)

    Knapp, E.A.; Jameson, R.A. (comps.)

    1982-05-01T23:59:59.000Z

    This report covers the activities of Los Alamos National Laboratory's Accelerator Technology Division during the first 6 months of calendar 1981. We discuss the Division's major projects, which reflect a variety of applications and sponsors. The varied technologies concerned with the Proton Storage ring are concerned with the Proton Storage Ring are continuing and are discussed in detail. For the racetrack microtron (RTM) project, the major effort has been the design and construction of the demonstration RTM. Our development of the radio-frequency quadrupole (RFQ) linear accelerator continues to stimulate interest for many possible applications. Frequent contacts from other laboratories have revealed a wide acceptance of the RFQ principle in solving low-velocity acceleration problems. In recent work on heavy ion fusion we have developed ideas for funneling beams from RFQ linacs; the funneling process is explained. To test as many aspects as possible of a fully integrated low-energy portion of a Pion generator for Medical Irradiation (PIGMI) Accelerator, a prototype accelerator was designed to take advantage of several pieces of existing accelerator hardware. The important principles to be tested in this prototype accelerator are detailed. Our prototype gyrocon has been extensively tested and modified; we discuss results from our investigations. Our work with the Fusion Materials Irradiation Test Facility is reviewed in this report.

  5. CESR Test Accelerator

    E-Print Network [OSTI]

    Rubin, David L

    2013-01-01T23:59:59.000Z

    The Cornell Electron Storage Ring (CESR) was reconfigured in 2008 as a test accelerator to investigate the physics of ultra-low emittance damping rings. During the approximately 40 days/year available for dedicated operation as a test accelerator, specialized instrumentation is used to measure growth and mitigation of the electron cloud, emittance growth due to electron cloud, intra-beam scattering, and ions, and single and multi-bunch instabilities generated by collective effects. The flexibility of the CESR guide field optics and the integration of accelerator modeling codes with the control system have made possible an extraordinary range of experiments. Findings at CesrTA with respect to electron cloud effects, emittance tuning techniques, and beam instrumentation for measuring electron cloud, beam sizes, and beam positions are the basis for much of the design of the ILC damping rings as documented in the ILC-Technical Design Report. The program has allowed the Cornell group to cultivate the kind of talen...

  6. SLAC National Accelerator Laboratory Accelerator Physics Faculty Search

    E-Print Network [OSTI]

    Ford, James

    SLAC National Accelerator Laboratory Accelerator Physics Faculty Search The SLAC National Accelerator Laboratory invites applications for a faculty appointment in Accelerator Physics (LCLS), LCLS-II, SPEAR-3, NLC Test Accelerator (NLCTA), Cathode Test Facility (CTF), the proposed

  7. Superconducting Radiofrequency (SRF) Accelerator Cavities

    ScienceCinema (OSTI)

    Reece, Charlie

    2014-05-22T23:59:59.000Z

    Charlie Reece, an accelerator technology scientist, explains how superconducting radiofrequency accelerator cavities work.

  8. Accelerating Scientific Discovery

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Analysis & Visualization Division 2 Developing and applying the world's best tools for neutron scattering High Flux Isotope Reactor: Intense steady-state neutron flux and a...

  9. Space time coded code division multiplexing on SC140 DSP

    E-Print Network [OSTI]

    Menon, Murali P

    2001-01-01T23:59:59.000Z

    The aim of this research is to design a high data rate wireless communication system for multi-path fading channels. Code-division multiplexing is proposed as a modulation scheme for a space-time coded multiple antenna system that would guarantee...

  10. Facilities Division ISM Plan 2009 1.0 Purpose

    E-Print Network [OSTI]

    ://www.lbl.gov/ehs/pub3000/ · Operating & Quality Management Plan, Rev. 9 LBNL/PUB-3111 (http://www.7 Student Safety 3.8 Division Safety Coordinator 3.9. Safety Review Committee Member 3.10 Building Manager.g.,HMS system) 5.2 Work Requiring Specific Authorization (e.g., list Group JHAs, point to system) 6

  11. APT accelerator. Topical report

    SciTech Connect (OSTI)

    Lawrence, G.; Rusthoi, D. [comp.] [ed.

    1995-03-01T23:59:59.000Z

    The Accelerator Production of Tritium (APT) project, sponsored by Department of Energy Defense Programs (DOE/DP), involves the preconceptual design of an accelerator system to produce tritium for the nation`s stockpile of nuclear weapons. Tritium is an isotope of hydrogen used in nuclear weapons, and must be replenished because of radioactive decay (its half-life is approximately 12 years). Because the annual production requirements for tritium has greatly decreased since the end of the Cold War, an alternative approach to reactors for tritium production, based on a linear accelerator, is now being seriously considered. The annual tritium requirement at the time this study was undertaken (1992-1993) was 3/8 that of the 1988 goal, usually stated as 3/8-Goal. Continued reduction in the number of weapons in the stockpile has led to a revised (lower) production requirement today (March, 1995). The production requirement needed to maintain the reduced stockpile, as stated in the recent Nuclear Posture Review (summer 1994) is approximately 3/16-Goal, half the previous level. The Nuclear Posture Review also requires that the production plant be designed to accomodate a production increase (surge) to 3/8-Goal capability within five years, to allow recovery from a possible extended outage of the tritium plant. A multi-laboratory team, collaborating with several industrial partners, has developed a preconceptual APT design for the 3/8-Goal, operating at 75% capacity. The team has presented APT as a promising alternative to the reactor concepts proposed for Complex-21. Given the requirements of a reduced weapons stockpile, APT offers both significant safety, environmental, and production-fexibility advantages in comparison with reactor systems, and the prospect of successful development in time to meet the US defense requirements of the 21st Century.

  12. Data management in energy and environment systems : a case study of Web services in the E.P.A.'s Clean Air Markets Division.

    E-Print Network [OSTI]

    Adams, Michael W. (Michael Wayne), 1978-

    2004-01-01T23:59:59.000Z

    The components comprising the energy and environment system for electric power are both complex and data intensive. With monitoring of different system components becoming common, increasingly the limits posed on participants ...

  13. Computer Sciences and Mathematics Division | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computer Sciences and Mathematics Division SHARE Computer Sciences and Mathematics Division The Computer Science and Mathematics Division (CSMD) is ORNL's premier source of basic...

  14. Computational Sciences and Engineering Division | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computational Sciences and Engineering Division SHARE Computational Sciences and Engineering Division The Computational Sciences and Engineering Division is a major research...

  15. Community Petascale Project for Accelerator Science and Simulation: Advancing Computational Science for Future Accelerators and Accelerator Technologies

    SciTech Connect (OSTI)

    Spentzouris, P.; /Fermilab; Cary, J.; /Tech-X, Boulder; McInnes, L.C.; /Argonne; Mori, W.; /UCLA; Ng, C.; /SLAC; Ng, E.; Ryne, R.; /LBL, Berkeley

    2011-11-14T23:59:59.000Z

    The design and performance optimization of particle accelerators are essential for the success of the DOE scientific program in the next decade. Particle accelerators are very complex systems whose accurate description involves a large number of degrees of freedom and requires the inclusion of many physics processes. Building on the success of the SciDAC-1 Accelerator Science and Technology project, the SciDAC-2 Community Petascale Project for Accelerator Science and Simulation (ComPASS) is developing a comprehensive set of interoperable components for beam dynamics, electromagnetics, electron cooling, and laser/plasma acceleration modelling. ComPASS is providing accelerator scientists the tools required to enable the necessary accelerator simulation paradigm shift from high-fidelity single physics process modeling (covered under SciDAC1) to high-fidelity multiphysics modeling. Our computational frameworks have been used to model the behavior of a large number of accelerators and accelerator R&D experiments, assisting both their design and performance optimization. As parallel computational applications, the ComPASS codes have been shown to make effective use of thousands of processors. ComPASS is in the first year of executing its plan to develop the next-generation HPC accelerator modeling tools. ComPASS aims to develop an integrated simulation environment that will utilize existing and new accelerator physics modules with petascale capabilities, by employing modern computing and solver technologies. The ComPASS vision is to deliver to accelerator scientists a virtual accelerator and virtual prototyping modeling environment, with the necessary multiphysics, multiscale capabilities. The plan for this development includes delivering accelerator modeling applications appropriate for each stage of the ComPASS software evolution. Such applications are already being used to address challenging problems in accelerator design and optimization. The ComPASS organization for software development and applications accounts for the natural domain areas (beam dynamics, electromagnetics, and advanced acceleration), and all areas depend on the enabling technologies activities, such as solvers and component technology, to deliver the desired performance and integrated simulation environment. The ComPASS applications focus on computationally challenging problems important for design or performance optimization to all major HEP, NP, and BES accelerator facilities. With the cost and complexity of particle accelerators rising, the use of computation to optimize their designs and find improved operating regimes becomes essential, potentially leading to significant cost savings with modest investment.

  16. Argonne Physics Division - ATLAS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of the upgrade will replace the front end of the ATLAS Positive Ion Injector linac (PII) by a new bunching system, a Radio-Frequency Quadrupole (RFQ) and a new cryostat of...

  17. Some Frontiers of Accelerator Physics

    E-Print Network [OSTI]

    Sessler, Andrew M.

    2008-01-01T23:59:59.000Z

    Some Frontiers of Accelerator Physics A.M. Sessler OctoberSOME FRONTIERS OF ACCELERATOR PHYSICS* Andrew M. Sessleris Some Frontiers of Accelerator Physics and it is most

  18. Accelerating Particles with Plasma

    SciTech Connect (OSTI)

    Litos, Michael; Hogan, Mark

    2014-11-05T23:59:59.000Z

    Researchers at SLAC explain how they use plasma wakefields to accelerate bunches of electrons to very high energies over only a short distance. Their experiments offer a possible path for the future of particle accelerators.

  19. DIVISION 6 -WOOD AND PLASTICS 06000 GENERAL

    E-Print Network [OSTI]

    DIVISION 6 - WOOD AND PLASTICS ________________________________________________________________________ 06000 GENERAL 1. For both woods and plastics, special attention is called to matters of flame spread-dried. 3. For exterior wood or plastic framed structures, see Division 4 for dimensions of Sample Panel

  20. Education Strategy Team Policy Division

    E-Print Network [OSTI]

    Rambaut, Andrew

    Education Strategy Team Policy Division DFID 1 Palace Street London SW1E 5HE 30 October 2009 TEL fellowships in India under the Wellcome Trust/DBT India Alliance2 . We believe that such investment is vital/Global-health-research/WTX055734.htm 2 Wellcome Trust/DBT India Alliance: http://www.wellcomedbt.org/index.htm #12;to support

  1. Publishing Division The Edinburgh Building

    E-Print Network [OSTI]

    Rosenberger, Alfred H.

    Publishing Division The Edinburgh Building Shaftesbury Road Cambridge CB2 2RU, UK TELEPHONE 01223 Building, Cambridge CB2 2RU, UK 40 West 20th Street, New York NY 10011-4211, USA 477 Williamstown Road Record [1] walter carl hartwig 2 The origin of primates [5] david tab rasmussen The earliest primates

  2. Biosciences Division Media Mentions | Clean Energy | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Biosciences Division Publications Newsletters Organizational Charts Research Highlights Media Mentions Clean Energy Home | Science & Discovery | Clean Energy | Supporting...

  3. Westinghouse Advanced Reactors Division Plutonium Fuel Laboratories

    Office of Legacy Management (LM)

    Radiological Condition of the Westinghouse Advanced Reactors Division Plutonium Fuel Laboratories Cheswick, Pennsylvania -. -, -- AGENCY: Office of Operational Safety, Department...

  4. Chemical Technology Division, Annual technical report, 1991

    SciTech Connect (OSTI)

    Not Available

    1992-03-01T23:59:59.000Z

    Highlights of the Chemical Technology (CMT) Division's activities during 1991 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources; chemistry of superconducting oxides and other materials of interest with technological application; interfacial processes of importance to corrosion science, catalysis, and high-temperature superconductivity; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  5. Commnity Petascale Project for Accelerator Science and Simulation: Advancing Computational Science for Future Accelerators and Accelerator Technologies

    SciTech Connect (OSTI)

    Spentzouris, Panagiotis; /Fermilab; Cary, John; /Tech-X, Boulder; Mcinnes, Lois Curfman; /Argonne; Mori, Warren; /UCLA; Ng, Cho; /SLAC; Ng, Esmond; Ryne, Robert; /LBL, Berkeley

    2008-07-01T23:59:59.000Z

    The design and performance optimization of particle accelerators is essential for the success of the DOE scientific program in the next decade. Particle accelerators are very complex systems whose accurate description involves a large number of degrees of freedom and requires the inclusion of many physics processes. Building on the success of the SciDAC1 Accelerator Science and Technology project, the SciDAC2 Community Petascale Project for Accelerator Science and Simulation (ComPASS) is developing a comprehensive set of interoperable components for beam dynamics, electromagnetics, electron cooling, and laser/plasma acceleration modeling. ComPASS is providing accelerator scientists the tools required to enable the necessary accelerator simulation paradigm shift from high-fidelity single physics process modeling (covered under SciDAC1) to high-fidelity multi-physics modeling. Our computational frameworks have been used to model the behavior of a large number of accelerators and accelerator R&D experiments, assisting both their design and performance optimization. As parallel computational applications, the ComPASS codes have been shown to make effective use of thousands of processors.

  6. Commnity Petascale Project for Accelerator Science And Simulation: Advancing Computational Science for Future Accelerators And Accelerator Technologies

    SciTech Connect (OSTI)

    Spentzouris, Panagiotis; /Fermilab; Cary, John; /Tech-X, Boulder; Mcinnes, Lois Curfman; /Argonne; Mori, Warren; /UCLA; Ng, Cho; /SLAC; Ng, Esmond; Ryne, Robert; /LBL, Berkeley

    2011-10-21T23:59:59.000Z

    The design and performance optimization of particle accelerators are essential for the success of the DOE scientific program in the next decade. Particle accelerators are very complex systems whose accurate description involves a large number of degrees of freedom and requires the inclusion of many physics processes. Building on the success of the SciDAC-1 Accelerator Science and Technology project, the SciDAC-2 Community Petascale Project for Accelerator Science and Simulation (ComPASS) is developing a comprehensive set of interoperable components for beam dynamics, electromagnetics, electron cooling, and laser/plasma acceleration modelling. ComPASS is providing accelerator scientists the tools required to enable the necessary accelerator simulation paradigm shift from high-fidelity single physics process modeling (covered under SciDAC1) to high-fidelity multiphysics modeling. Our computational frameworks have been used to model the behavior of a large number of accelerators and accelerator R&D experiments, assisting both their design and performance optimization. As parallel computational applications, the ComPASS codes have been shown to make effective use of thousands of processors.

  7. Finance Division EXTRA MILE AWARD PROGRAM

    E-Print Network [OSTI]

    Crews, Stephen

    Finance Division EXTRA MILE AWARD PROGRAM Nomination Form Instructions Any fulltime or parttime permanent or temporary SPA employee within the Finance Division who works 20 or more provided. The seven major departments within the Finance Division to choose from are described below

  8. EARTH SCIENCES Lower-Division Requirements

    E-Print Network [OSTI]

    Constable, Steve

    2012-2013 EARTH SCIENCES Lower-Division Requirements Math 20A_____ 20B_____ 20C_____ 20D (BILD 3) _____ SIO 50* _____ Group A: Earth Science Upper-Division Core Requirements (all courses _____ Introduction to Geophysics SIO 104 _____ Paleobiology and History of Life* Group B: Upper-Division Earth

  9. Computer Security Division 2008 Annual Report

    E-Print Network [OSTI]

    Computer Security Division 2008 Annual Report #12;TAble of ConTenTS Welcome 1 Division Organization 2 The Computer Security Division Responds to the Federal Information Security Management Act of 2002 3 Security Management and Assistance Group (SMA) 4 FISMA Implementation Project 4 Publications

  10. YALINA facility a sub-critical Accelerator- Driven System (ADS) for nuclear energy research facility description and an overview of the research program (1997-2008).

    SciTech Connect (OSTI)

    Gohar, Y.; Smith, D. L.; Nuclear Engineering Division

    2010-04-28T23:59:59.000Z

    The YALINA facility is a zero-power, sub-critical assembly driven by a conventional neutron generator. It was conceived, constructed, and put into operation at the Radiation Physics and Chemistry Problems Institute of the National Academy of Sciences of Belarus located in Minsk-Sosny, Belarus. This facility was conceived for the purpose of investigating the static and dynamic neutronics properties of accelerator driven sub-critical systems, and to serve as a neutron source for investigating the properties of nuclear reactions, in particular transmutation reactions involving minor-actinide nuclei. This report provides a detailed description of this facility and documents the progress of research carried out there during a period of approximately a decade since the facility was conceived and built until the end of 2008. During its history of development and operation to date (1997-2008), the YALINA facility has hosted several foreign groups that worked with the resident staff as collaborators. The participation of Argonne National Laboratory in the YALINA research programs commenced in 2005. For obvious reasons, special emphasis is placed in this report on the work at YALINA facility that has involved Argonne's participation. Attention is given here to the experimental program at YALINA facility as well as to analytical investigations aimed at validating codes and computational procedures and at providing a better understanding of the physics and operational behavior of the YALINA facility in particular, and ADS systems in general, during the period 1997-2008.

  11. MATERIALS AND MOLECULAR RESEARCH DIVISION. ANNUAL REPORT 1980

    E-Print Network [OSTI]

    Searcy, Alan W.

    2010-01-01T23:59:59.000Z

    of trans­ uranium organometallic chemistry, particularlyfor Uranium Isotope Separation," Chemistry Division, IsotopeOlander, "Uranium Enrichment by Laser," Chemistry Division,

  12. analytical sciences division: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Division Environmental Management and Restoration Websites Summary: Chemical Sciences and Engineering Division Director Assoc Director Ops Assoc Director Science Yates...

  13. MATERIALS AND MOLECULAR RESEARCH DIVISION. ANNUAL REPORT 1980

    E-Print Network [OSTI]

    Searcy, Alan W.

    2010-01-01T23:59:59.000Z

    for Uranium Isotope Separation," Chemistry Division, Isotopeof trans­ uranium organometallic chemistry, particularlyOlander, "Uranium Enrichment by Laser," Chemistry Division,

  14. USENIX Association NSDI '11: 8th USENIX Symposium on Networked Systems Design and Implementation 1 SSLShader: Cheap SSL Acceleration with Commodity Processors

    E-Print Network [OSTI]

    Moon, Sue B.

    SSLShader: Cheap SSL Acceleration with Commodity Processors Keon Jang+, Sangjin Han+, Seungyeop Han*, Sue. Unfortunately, today's SSL deployment is largely limited to security or privacy- critical domains. The low, and the cost of good privacy on the Internet is tightly bound to expensive hardware SSL accelerators

  15. Chemical Technology Division annual technical report, 1986

    SciTech Connect (OSTI)

    Not Available

    1987-06-01T23:59:59.000Z

    Highlights of the Chemical Technology (CMT) Division's activities during 1986 are presented. In this period, CMT conducted research and development in areas that include the following: (1) high-performance batteries - mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants, the technology for fluidized-bed combustion, and a novel concept for CO/sub 2/ recovery from fossil fuel combustion; (5) methods for recovery of energy from municipal waste; (6) methods for the electromagnetic continuous casting of steel sheet; (7) techniques for treatment of hazardous waste such as reactive metals and trichloroethylenes; (8) nuclear technology related to waste management, a process for separating and recovering transuranic elements from nuclear waste, and the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor; and (9) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of catalytic hydrogenation and catalytic oxidation; materials chemistry for associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, surface science, and catalysis; the thermochemistry of zeolites and related silicates; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 127 refs., 71 figs., 8 tabs.

  16. Chemical technology division: Annual technical report 1987

    SciTech Connect (OSTI)

    Not Available

    1988-05-01T23:59:59.000Z

    Highlights of the Chemical Technology (CMT) Division's activities during 1987 are presented. In this period, CMT conducted research and development in the following areas: (1) high-performance batteries--mainly lithium-alloy/metal sulfide and sodium/sulfur; (2) aqueous batteries (lead-acid, nickel/iron, etc.); (3) advanced fuel cells with molten carbonate or solid oxide electrolytes; (4) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (5) methods for the electromagnetic continuous casting of steel sheet and for the purification of ferrous scrap; (6) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (7) nuclear technology related to a process for separating and recovering transuranic elements from nuclear waste, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor, and waste management; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for liquids and vapors at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; the thermochemistry of various minerals; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be the major user of the technical support provided by the Analytical Chemistry Laboratory at ANL. 54 figs., 9 tabs.

  17. Chemical Technology Division annual technical report 1989

    SciTech Connect (OSTI)

    Not Available

    1990-03-01T23:59:59.000Z

    Highlights of the Chemical Technology (CMT) Division's activities during 1989 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including high-performance batteries (mainly lithium/iron sulfide and sodium/metal chloride), aqueous batteries (lead-acid and nickel/iron), and advanced fuel cells with molten carbonate and solid oxide electrolytes: (2) coal utilization, including the heat and seed recovery technology for coal-fired magnetohydrodynamics plants and the technology for fluidized-bed combustion; (3) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (4) nuclear technology related to a process for separating and recovering transuranic elements from nuclear waste and for producing {sup 99}Mo from low-enriched uranium targets, the recovery processes for discharged fuel and the uranium blanket in a sodium-cooled fast reactor (the Integral Fast Reactor), and waste management; and (5) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for superconducting oxides and associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; and the geochemical processes responsible for trace-element migration within the earth's crust. The Division continued to be administratively responsible for and the major user of the Analytical Chemistry Laboratory at Argonne National Laboratory (ANL).

  18. Nuclear Science Division 1994 annual report

    SciTech Connect (OSTI)

    Myers, W.D. [ed.

    1995-06-01T23:59:59.000Z

    This report describes the activities of the Nuclear Science Division for the period of January 1, 1994, to December 31, 1994. This was a time of significant accomplishment for all of the programs in the Division. Assembly of the solar neutrino detector at the Sudbury Neutrino Observatory is well under way. All of the components fabricated by LBL were shipped to Sudbury early in the year and our efforts are now divided between assisting the assembly of the detector and preparing software for data analysis once the detector is operational in 1996. Much of the activity at the 88-Inch Cyclotron centered on Gammasphere. The {open_quotes}early implementation{close_quotes} phase of the detector ended in September. This phase was extremely successful, involving over 60 experiments with nearly 200 users from 37 institutions worldwide. The mechanical structure was installed and the final electronic system is expected to operate in March 1995. The Division concurrently hosted a conference on physics for large {gamma}-ray detector arrays at the Clark Kerr Campus at UC Berkeley in August. This was a very successful meeting, reflecting the enthusiasm for this field worldwide. Also at the Cyclotron, the progress toward weak interaction experiments using ultra-thin sources passed a major milestone with the trapping of radioactive {sup 21}Na atoms. We are now engaged in a major upgrade of the experimental area and the outlook is very promising for these novel experiments. Another highlight of research at the Cyclotron was the confirmation of element 106. This development allowed the original LLNL/LBL discovery team to move forward with their proposal to name this element seaborgium.

  19. Energy Research and Development Division FINAL PROJECT REPORT

    E-Print Network [OSTI]

    Energy Research and Development Division FINAL PROJECT REPORT Integrated CHP Company, California Air Resource Board, U.S. Department of Energy, Integrated CHP Systems Corporation Integrated CHP Using UltraLow NOx Supplemental Firing is the final report for the Integrated CHP Using Ultra

  20. Acquisition Services Management (ASM) Division Subcontracts, ASM-SUB

    E-Print Network [OSTI]

    Acquisition Services Management (ASM) Division Subcontracts, ASM-SUB P.O. Box 1663, Mail Stop D447-trace of itself while running. Question/Issue 3 This question is on the three codes described in the Trinity Capability Improvement codes on the Cielo system is shown at different node counts. What is the memory

  1. Energy Research and Development Division FINAL PROJECT REPORT

    E-Print Network [OSTI]

    Energy Research and Development Division FINAL PROJECT REPORT POTENTIAL TARGETS AND BENEFITS FOR URBAN ENERGY SYSTEMS RESEARCH MAY 2009 CEC-500-2010-009 Prepared for: California Energy Commission Institute of the Environment Los Angeles, CA Contract Number: BOA-99-207-P Prepared for: California Energy

  2. Energy Research and Development Division FINAL PROJECT REPORT

    E-Print Network [OSTI]

    Energy Research and Development Division FINAL PROJECT REPORT PILOT PHASE OF A FIELD STUDY TO DETERMINE WASTE OF WATER AND ENERGY IN RESIDENTIAL HOT WATER DISTRIBUTION SYSTEMS JULY 2009 CEC-500-2013-135 Prepared for: California Energy Commission Prepared by: Lawrence Berkeley National Laboratory #12;PREPARED

  3. Energy Research and Development Division FINAL PROJECT REPORT

    E-Print Network [OSTI]

    Energy Research and Development Division FINAL PROJECT REPORT EFFICIENT HEAT AND POWER SYSTEMS FOR CHP APPLICATIONS MARCH 2012 CEC-500-2014-002 Prepared for: California Energy Commission Prepared by-003 Prepared for: California Energy Commission Mike Kane Contract Manager Linda Spiegel Office Manager Energy

  4. Energy Research and Development Division FINAL PROJECT REPORT

    E-Print Network [OSTI]

    Energy Research and Development Division FINAL PROJECT REPORT AN ECONOMIC ANALYSIS OF SIX DAIRY DIGESTER SYSTEMS IN CALIFORNIA Volume 2 MARCH 2013 CEC-500-2014-001-V2 Prepared for: California Energy: California Energy Commission Abolghasem Edalati Contract Manager Linda Spiegel Office Manager Energy

  5. High brightness electron accelerator

    DOE Patents [OSTI]

    Sheffield, Richard L. (Los Alamos, NM); Carlsten, Bruce E. (Los Alamos, NM); Young, Lloyd M. (Los Alamos, NM)

    1994-01-01T23:59:59.000Z

    A compact high brightness linear accelerator is provided for use, e.g., in a free electron laser. The accelerator has a first plurality of acclerating cavities having end walls with four coupling slots for accelerating electrons to high velocities in the absence of quadrupole fields. A second plurality of cavities receives the high velocity electrons for further acceleration, where each of the second cavities has end walls with two coupling slots for acceleration in the absence of dipole fields. The accelerator also includes a first cavity with an extended length to provide for phase matching the electron beam along the accelerating cavities. A solenoid is provided about the photocathode that emits the electons, where the solenoid is configured to provide a substantially uniform magnetic field over the photocathode surface to minimize emittance of the electons as the electrons enter the first cavity.

  6. Strategic Alignment of the Division of Earth Systems Science at Oregon State University Responses to Comments and Questions from SABRRC, Provost's Council, and Others

    E-Print Network [OSTI]

    Escher, Christine

    for positions in the private sector, state and federal agencies, and academia. Building on a solid foundation managed wildland systems for renewable natural resources beyond food, fiber, and wood: water, renewable materials and energy, fish and wildlife, re-creational retreats, carbon storage These clusters

  7. Diffusive Acceleration of Ions at Interplanetary Shocks

    E-Print Network [OSTI]

    Matthew G. Baring; Errol J. Summerlin

    2005-06-08T23:59:59.000Z

    Heliospheric shocks are excellent systems for testing theories of particle acceleration in their environs. These generally fall into two classes: (1) interplanetary shocks that are linear in their ion acceleration characteristics, with the non-thermal ions serving as test particles, and (2) non-linear systems such as the Earth's bow shock and the solar wind termination shock, where the accelerated ions strongly influence the magnetohydrodynamic structure of the shock. This paper explores the modelling of diffusive acceleration at a particular interplanetary shock, with an emphasis on explaining in situ measurements of ion distribution functions. The observational data for this event was acquired on day 292 of 1991 by the Ulysses mission. The modeling is performed using a well-known kinetic Monte Carlo simulation, which has yielded good agreement with observations at several heliospheric shocks, as have other theoretical techniques, namely hybrid plasma simulations, and numerical solution of the diffusion-convection equation. In this theory/data comparison, it is demonstrated that diffusive acceleration theory can, to first order, successfully account for both the proton distribution data near the shock, and the observation of energetic protons farther upstream of this interplanetary shock than lower energy pick-up protons, using a single turbulence parameter. The principal conclusion is that diffusive acceleration of inflowing upstream ions can model this pick-up ion-rich event without the invoking any seed pre-acceleration mechanism, though this investigation does not rule out the action of such pre-acceleration.

  8. Physics Division progress report for period ending September 30, 1990

    SciTech Connect (OSTI)

    Livingston, A.B. (ed.)

    1991-03-01T23:59:59.000Z

    The activities of this Division continue to be concentrated in the areas of experimental nuclear physics, experimental atomic physics, and theoretical nuclear and atomic physics. The Holifield Heavy Ion Research Facility and its operation as a national user facility continued as the single largest activity within the Division. The experimental nuclear physics program continues to emphasize heavy ion studies, with much of the activity centered at the Holifield Facility. The work with heavy ions at ultrarelativistic energies continues at the CERN SPS. Studies at the Brookhaven AGS, particularly in preparation of future experiments at RHIC, have seen an increased emphasis. A major consortium has been formed to propose the design and construction of a dimuon detector as the basis for one the principal experiments for RHIC. Also included are results from the increasing effort in particle physics, including participation in the L* proposal for the SSC. The UNISOR program, since its inception, has been associated intimately with the Division and, most particularly, with the Holifield Facility. A major area of experimental research for the Division is atomic physics. This activity comprises two groups: one on accelerator-based atomic physics, centered primarily at the EN-tandem and the Holifield Facility, but extending this year to an experiment at ultrarelativistic energies at the CERN SPS; and one on atomic physics in support of fusion energy, based primarily at the ECR ion source facility. Included in this section is also a description of a new effort in multicharged ion-surface interactions, and details of a planned upgrade of the ECR source.

  9. Physics Division progress report for period ending September 30, 1987

    SciTech Connect (OSTI)

    Livingston, A.B. (ed.)

    1988-03-01T23:59:59.000Z

    The activities of this Division are concentrated in the areas of experimental nuclear physics, experimental atomic physics, and theoretical nuclear and atomic physics. A major activity within the Division is operation of the Holifield Heavy Ion Research Facility as a national user facility. Highlights for this year, which include a record number of beam hours provided for research, are summarized. The experimental nuclear physics program continues to be dominated by research utilizing heavy ions. These activities, while continuing to center largely on the Holifield Facility, have seen growth in the use of facilities that provide intermediate energies (GANIL) and ultrarelativistic beams (CERN). The UNISOR program, since its inception, has been intimately associated with the Division and, most particularly, with the Holifield Facility. The experimental nuclear structure research of this consortium is included. In addition to the Holifield Facility, the Division also operates two smaller facilities, the EN Tandem and the ECR Ion Source Facility, as /open quotes/User Resources/close quotes/. The tandem continues a long history of supporting research in accelerator-based atomic physics. During this past year, new beam lines have been added to the ECR ion source to create user opportunities for atomic physics experiments with this unique device. These two facilities and the experimental programs in atomic physics are discussed. The efforts in theoretical physics, covering both nuclear and atomic physics, are presented. Also included is the theory effort in support of the UNISOR structure program. In addition to research with multicharged heavy ions from the ECR source, the effort on atomic physics in support of the controlled fusion program includes a plasma diagnostics development program and operation of an atomic physics data center. The nuclear physics program also operates a compilation and evaluation effort; this work is also described.

  10. Cost and Performance Report Accelerated Site Technology Deployment Program

    SciTech Connect (OSTI)

    P. S. Morris

    2002-05-01T23:59:59.000Z

    The U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Operations Office (NNSA/NV) Environmental Restoration Division (ERD) Industrial Sites Project Deactivation and Decommissioning (D and D) source group has limited budget and is constantly searching for new technologies to reduce programmatic costs. Partnering with the DOE Office of Science and Technology Deactivation and Decommissioning Focus Area (DDFA) reduces NNSA/NV programmatic risk and encourages accelerated deployment of potentially beneficial technologies to the Nevada Test Site (NTS).

  11. PRODUCTION AND APPLICATIONS OF NEUTRONS USING PARTICLE ACCELERATORS

    SciTech Connect (OSTI)

    David L. Chichester

    2009-11-01T23:59:59.000Z

    Advances in neutron science have gone hand in hand with the development and of particle accelerators from the beginning of both fields of study. Early accelerator systems were developed simply to produce neutrons, allowing scientists to study their properties and how neutrons interact in matter, but people quickly realized that more tangible uses existed too. Today the diversity of applications for industrial accelerator-based neutron sources is high and so to is the actual number of instruments in daily use is high, and they serve important roles in the fields where they're used. This chapter presents a technical introduction to the different ways particle accelerators are used to produce neutrons, an historical overview of the early development of neutron-producing particle accelerators, a description of some current industrial accelerator systems, narratives of the fields where neutron-producing particle accelerators are used today, and comments on future trends in the industrial uses of neutron producing particle accelerators.

  12. Chemical Technology Division annual technical report, 1993

    SciTech Connect (OSTI)

    Battles, J.E.; Myles, K.M.; Laidler, J.J.; Green, D.W.

    1994-04-01T23:59:59.000Z

    Chemical Technology (CMT) Division this period, conducted research and development in the following areas: advanced batteries and fuel cells; fluidized-bed combustion and coal-fired magnetohydrodynamics; treatment of hazardous waste and mixed hazardous/radioactive waste; reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; separating and recovering transuranic elements, concentrating radioactive waste streams with advanced evaporators, and producing {sup 99}Mo from low-enriched uranium; recovering actinide from IFR core and blanket fuel in removing fission products from recycled fuel, and disposing removal of actinides in spent fuel from commercial water-cooled nuclear reactors; and physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, molecular sieve structures, thin-film diamond surfaces, effluents from wood combustion, and molten silicates; and the geochemical processes involved in water-rock interactions. The Analytical Chemistry Laboratory in CMT also provides a broad range of analytical chemistry support.

  13. Health, Safety, and Environment Division

    SciTech Connect (OSTI)

    Wade, C [comp.] [comp.

    1992-01-01T23:59:59.000Z

    The primary responsibility of the Health, Safety, and Environmental (HSE) Division at the Los Alamos National Laboratory is to provide comprehensive occupational health and safety programs, waste processing, and environmental protection. These activities are designed to protect the worker, the public, and the environment. Meeting these responsibilities requires expertise in many disciplines, including radiation protection, industrial hygiene, safety, occupational medicine, environmental science and engineering, analytical chemistry, epidemiology, and waste management. New and challenging health, safety, and environmental problems occasionally arise from the diverse research and development work of the Laboratory, and research programs in HSE Division often stem from these applied needs. These programs continue but are also extended, as needed, to study specific problems for the Department of Energy. The results of these programs help develop better practices in occupational health and safety, radiation protection, and environmental science.

  14. Argonne National Laboratory Physics Division annual report, January--December 1996

    SciTech Connect (OSTI)

    Thayer, K.J. [ed.

    1997-08-01T23:59:59.000Z

    The past year has seen several of the Physics Division`s new research projects reach major milestones with first successful experiments and results: the atomic physics station in the Basic Energy Sciences Research Center at the Argonne Advanced Photon Source was used in first high-energy, high-brilliance x-ray studies in atomic and molecular physics; the Short Orbit Spectrometer in Hall C at the Thomas Jefferson National Accelerator (TJNAF) Facility that the Argonne medium energy nuclear physics group was responsible for, was used extensively in the first round of experiments at TJNAF; at ATLAS, several new beams of radioactive isotopes were developed and used in studies of nuclear physics and nuclear astrophysics; the new ECR ion source at ATLAS was completed and first commissioning tests indicate excellent performance characteristics; Quantum Monte Carlo calculations of mass-8 nuclei were performed for the first time with realistic nucleon-nucleon interactions using state-of-the-art computers, including Argonne`s massively parallel IBM SP. At the same time other future projects are well under way: preparations for the move of Gammasphere to ATLAS in September 1997 have progressed as planned. These new efforts are imbedded in, or flowing from, the vibrant ongoing research program described in some detail in this report: nuclear structure and reactions with heavy ions; measurements of reactions of astrophysical interest; studies of nucleon and sub-nucleon structures using leptonic probes at intermediate and high energies; atomic and molecular structure with high-energy x-rays. The experimental efforts are being complemented with efforts in theory, from QCD to nucleon-meson systems to structure and reactions of nuclei. Finally, the operation of ATLAS as a national users facility has achieved a new milestone, with 5,800 hours beam on target for experiments during the past fiscal year.

  15. Accelerator technology program. Progress report, July-December 1980

    SciTech Connect (OSTI)

    Knapp, E.A.; Jameson, R.A. (comp.)

    1982-01-01T23:59:59.000Z

    The activities of Los Alamos National Laboratory's Accelerator Technology Division are discussed. This report covers the last six months of calendar 1980 and is organized around the Division's major projects. These projects reflect a wide variety of applications and sponsors. The major technological innovations promoted by the Pion Generator for Medical Irradiation (PIGMI) program have been developed; accelerator technologies relevant to the design of a medically practical PIGMI have been identified. A new group in AT Division deals with microwave and magnet studies; we describe the status of some of their projects. We discuss the prototype gyrocon, which has been completed, and the development of the radio-frequency quadrupole linear accelerator, which continues to stimulate interest for many possible applications. One section of this report briefly describes the results of a design study for an electron beam ion source that is ideally suited as an injector for a heavy ion linac; another section reports on a turbine engine test facility that will expose operating turbine engines to simulated maneuver forces. In other sections we discuss various activities: the Fusion Materials Irradiation Test program, the free-electron laser program, the racetrack microtron project, the Proton Storage ring, and H/sup -/ ion sources and injectors.

  16. Leaky Fermi accelerators

    E-Print Network [OSTI]

    Shah, Kushal; Rom-Kedar, Vered; Turaev, Dmitry

    2015-01-01T23:59:59.000Z

    A Fermi accelerator is a billiard with oscillating walls. A leaky accelerator interacts with an environment of an ideal gas at equilibrium by exchange of particles through a small hole on its boundary. Such interaction may heat the gas: we estimate the net energy flow through the hole under the assumption that the particles inside the billiard do not collide with each other and remain in the accelerator for sufficiently long time. The heat production is found to depend strongly on the type of the Fermi accelerator. An ergodic accelerator, i.e. one which has a single ergodic component, produces a weaker energy flow than a multi-component accelerator. Specifically, in the ergodic case the energy gain is independent of the hole size, whereas in the multi-component case the energy flow may be significantly increased by shrinking the hole size.

  17. THE DIELECTRIC WALL ACCELERATOR

    SciTech Connect (OSTI)

    Caporaso, G J; Chen, Y; Sampayan, S E

    2009-08-17T23:59:59.000Z

    The Dielectric Wall Accelerator (DWA), a class of induction accelerators, employs a novel insulating beam tube to impress a longitudinal electric field on a bunch of charged particles. The surface flashover characteristics of this tube may permit the attainment of accelerating gradients on the order of 100 MV/m for accelerating pulses on the order of a nanosecond in duration. A virtual traveling wave of excitation along the tube is produced at any desired speed by controlling the timing of pulse generating modules that supply a tangential electric field to the tube wall. Because of the ability to control the speed of this virtual wave, the accelerator is capable of handling any charge to mass ratio particle; hence it can be used for electrons, protons and any ion. The accelerator architectures, key technologies and development challenges will be described.

  18. Particle acceleration in electron-ion jets

    E-Print Network [OSTI]

    K. -I. Nishikawa; P. Hardee; C. B. Hededal; G. Richardson; R. Preece; H. Sol; G. J. Fishman; C. Kouvelioutou; Y. Mizuno

    2005-09-20T23:59:59.000Z

    Weibel instability created in collisionless shocks is responsible for particle (electron, positron, and ion) acceleration. Using a 3-D relativistic electromagnetic particle (REMP) code, we have investigated particle acceleration associated with a relativistic electron-ion jet fronts propagating into an ambient plasma without initial magnetic fields with a longer simulation system in order to investigate nonlinear stage of the Weibel instability and its acceleration mechanism. The current channels generated by the Weibel instability induce the radial electric fields. The z component of the Poynting vector (E x B) become positive in the large region along the jet propagation direction. This leads to the acceleration of jet electrons along the jet. In particular the E x B drift with the large scale current channel generated by the ion Weibel instability accelerate electrons effectively in both parallel and perpendicular directions.

  19. Optically pulsed electron accelerator

    DOE Patents [OSTI]

    Fraser, J.S.; Sheffield, R.L.

    1985-05-20T23:59:59.000Z

    An optically pulsed electron accelerator can be used as an injector for a free electron laser and comprises a pulsed light source, such as a laser, for providing discrete incident light pulses. A photoemissive electron source emits electron bursts having the same duration as the incident light pulses when impinged upon by same. The photoemissive electron source is located on an inside wall of a radiofrequency-powered accelerator cell which accelerates the electron burst emitted by the photoemissive electron source.

  20. Optically pulsed electron accelerator

    DOE Patents [OSTI]

    Fraser, John S. (Los Alamos, NM); Sheffield, Richard L. (Los Alamos, NM)

    1987-01-01T23:59:59.000Z

    An optically pulsed electron accelerator can be used as an injector for a free electron laser and comprises a pulsed light source, such as a laser, for providing discrete incident light pulses. A photoemissive electron source emits electron bursts having the same duration as the incident light pulses when impinged upon by same. The photoemissive electron source is located on an inside wall of a radio frequency powered accelerator cell which accelerates the electron burst emitted by the photoemissive electron source.

  1. Muon Collider Progress: Accelerators

    E-Print Network [OSTI]

    Michael S. Zisman

    2011-09-14T23:59:59.000Z

    A muon collider would be a powerful tool for exploring the energy-frontier with leptons, and would complement the studies now under way at the LHC. Such a device would offer several important benefits. Muons, like electrons, are point particles so the full center-of-mass energy is available for particle production. Moreover, on account of their higher mass, muons give rise to very little synchrotron radiation and produce very little beamstrahlung. The first feature permits the use of a circular collider that can make efficient use of the expensive rf system and whose footprint is compatible with an existing laboratory site. The second feature leads to a relatively narrow energy spread at the collision point. Designing an accelerator complex for a muon collider is a challenging task. Firstly, the muons are produced as a tertiary beam, so a high-power proton beam and a target that can withstand it are needed to provide the required luminosity of ~1 \\times 10^34 cm^-2s^-1. Secondly, the beam is initially produced with a large 6D phase space, which necessitates a scheme for reducing the muon beam emittance ("cooling"). Finally, the muon has a short lifetime so all beam manipulations must be done very rapidly. The Muon Accelerator Program, led by Fermilab and including a number of U.S. national laboratories and universities, has undertaken design and R&D activities aimed toward the eventual construction of a muon collider. Design features of such a facility and the supporting R&D program are described.

  2. Machine Protection: Availability for Particle Accelerators

    E-Print Network [OSTI]

    Apollonio, Andrea; Schmidt, Ruediger

    2015-03-16T23:59:59.000Z

    Machine availability is a key indicator for the performance of the next generation of particle accelerators. Availability requirements need to be carefully considered during the design phase to achieve challenging objectives in different fields, as e.g. particle physics and material science. For existing and future High-Power facilities, such as ESS (European Spallation Source) and HL-LHC (High-Luminosity LHC), operation with unprecedented beam power requires highly dependable Machine Protection Systems (MPS) to avoid any damage-induced downtime. Due to the high complexity of accelerator systems, finding the optimal balance between equipment safety and accelerator availability is challenging. The MPS architecture, as well as the choice of electronic components, have a large influence on the achievable level of availability. In this thesis novel methods to address the availability of accelerators and their protection systems are presented. Examples of studies related to dependable MPS architectures are given i...

  3. Advanced Accelerator Concepts Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on high energy ion generation Levi Schachter Active Media Accelerators Benjamin Bowes Ultrafast 2-D radiative transport in a micron-scale aluminum plasma excited at...

  4. Accelerator Test Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Test Facility Vitaly Yakimenko October 6-7, 2010 ATF User meeting DOE HE, S. Vigdor, ALD - (Contact) T. Ludlam Chair, Physics Department V. Yakimenko Director ATF, Accelerator...

  5. Accelerator Concepts Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Colliders to Synchrotron Radiation Sources. The wide scope of the workshop includes new methods of particle acceleration to high energies, techniques for production of...

  6. Charged particle accelerator grating

    DOE Patents [OSTI]

    Palmer, Robert B. (Shoreham, NY)

    1986-01-01T23:59:59.000Z

    A readily disposable and replaceable accelerator grating for a relativistic particle accelerator. The grating is formed for a plurality of liquid droplets that are directed in precisely positioned jet streams to periodically dispose rows of droplets along the borders of a predetermined particle beam path. A plurality of lasers are used to direct laser beams into the droplets, at predetermined angles, thereby to excite the droplets to support electromagnetic accelerating resonances on their surfaces. Those resonances operate to accelerate and focus particles moving along the beam path. As the droplets are distorted or destroyed by the incoming radiation, they are replaced at a predetermined frequency by other droplets supplied through the jet streams.

  7. Accelerator R&D

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Superconducting RF Module with a PBG Coupler Cell, 2013 North American Particle Accelerator Conference, Pasadena, CA, September 29 - October 4th, 2013. Evgenya I. Simakov,...

  8. Market Acceleration (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-09-01T23:59:59.000Z

    The fact sheet summarizes the goals and activities of the DOE Solar Energy Technologies Program efforts within its market acceleration subprogram.

  9. Mechanical Engineering & Design Group (AES-MED)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Techniques Sectors Directory Status and Schedule Safety and Training Divisions APS Engineering Support Division AES Groups Accelerator Systems Division ASD Groups X-ray Science...

  10. Materials Physics and Engineering | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Techniques Sectors Directory Status and Schedule Safety and Training Divisions APS Engineering Support Division AES Groups Accelerator Systems Division ASD Groups X-ray Science...

  11. legal_land_01

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MATRIXED 50% TO APS UPGRADE ARE LISTED IN HOME DIVISION WITH NAME IN PARENTHESIS 912014 ACCELERATOR SYSTEMS DIVISION A. ZHOLENTS DIVISION DIRECTOR EXECUTIVE SECRETARY A....

  12. Engineering Physics and Mathematics Division progress report for period ending March 31, 1991

    SciTech Connect (OSTI)

    Not Available

    1991-10-01T23:59:59.000Z

    The primary purpose of this report is to provide an archival record of the activities of the Engineering Physics and Mathematics Division during the period September 1, 1989 through March 31, 1991. Earlier reports in this series are identified on the previous pages, along with the progress reports describing ORNL's research on the mathematical sciences prior to 1984 when those activities moved into the division. As in previous reports, our research is described through abstracts of journal articles, technical reports, and presentations. Summary lists of publications and presentations, staff additions and departures, scientific and professional activities of division staff, and technical conferences organized and sponsored by the division are included as appendices. The report is organized following the division of our research among four sections and information centers. These research areas are: Mathematical Sciences; Nuclear Data Measurement and Evaluations; Intelligent Systems; Nuclear Analysis and Shielding; and Engineering Physics Information Center.

  13. NIST Computer Security Division csrc.nist.gov Supplemental Guidance on

    E-Print Network [OSTI]

    -03, Enhancing the Security of Federal Information and Information Systems, stated that, "Our nation's security monitoring, or security authorization. Keywords Federal Information Security Management Act, Information Information For additional information on NIST's Computer Security Division programs, projects

  14. Carlsbad Area Office Waste Isolation Division Transition Plan

    SciTech Connect (OSTI)

    Not Available

    1994-01-01T23:59:59.000Z

    In October 1993, the US Department of Energy (DOE) announced the Revised Test Strategy for the Waste Isolation Pilot Plant (WIPP). The new strategy involves conducting additional radioactive waste tests in laboratories instead of the underground at the WIPP. It will likely result in an acceleration of regulatory compliance activities needed for a disposal decision, which could result in permanent disposal of transuranic waste earlier than the previous test program and regulatory compliance strategy. The Revised Test Strategy changes the near-term program activities for the WIPP site. The revised strategy deletes radioactive waste tests at the WIPP, prior to completing all activities for initiating disposal operations, and consequently the need to maintain readiness to receive waste in the near-term. However, the new strategy enables the DOE to pursue an earlier disposal decision, supported by an accelerated regulatory compliance strategy. With the new strategy, the WIPP must prepare for disposal operations in early 1998. This Westinghouse Waste Isolation Division (WID) Transition Plan addresses the WID programmatic, budgetary, and personnel changes to conform to the Revised Test Strategy, and to support the accelerated compliance strategy and earlier disposal operations at the WIPP.

  15. Particle-acceleration timescales in TeV blazar flares

    E-Print Network [OSTI]

    Joni Tammi; Peter Duffy

    2008-12-01T23:59:59.000Z

    Observations of minute-scale flares in TeV Blazars place constraints on particle acceleration mechanisms in those objects. The implications for a variety of radiation mechanisms have been addressed in the literature; in this paper we compare four different acceleration mechanisms: diffusive shock acceleration, second-order Fermi, shear acceleration and the converter mechanism. When the acceleration timescales and radiative losses are taken into account, we can exclude shear acceleration and the neutron-based converted mechanism as possible acceleration processes in these systems. The first-order Fermi process and the converter mechanism working via SSC photons are still practically instantaneous, however, provided sufficient turbulence is generated on the timescale of seconds. We propose stochastic acceleration as a promising candidate for the energy-dependent time delays in recent gamma-ray flares of Markarian 501.

  16. Chemical Technology Division annual technical report 1997

    SciTech Connect (OSTI)

    NONE

    1998-06-01T23:59:59.000Z

    The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials and electrified interfaces. In addition, the Division operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division`s activities during 1997 are presented.

  17. Community petascale project for accelerator science and simulation: Advancing computational science for future accelerators and accelerator technologies

    E-Print Network [OSTI]

    Spentzouris, Panagiotis

    2008-01-01T23:59:59.000Z

    program for computational accelerator physics development isof computational accelerator physics applications, withof computational accelerator physics. Under ComPASS, the

  18. aps linear accelerator: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    description of the APS and its documented numerous minor changes to accelerator system technical descriptions to ensure those descriptions Kemner, Ken 97 3-D Model of Broadband...

  19. accelerator driven neutron: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    effects of this term from being periodic. Brett D. Altschul 1999-04-11 8 Thorium as a Fuel for Accelerator Driven Subcritical Electronuclear Systems CERN Preprints Summary:...

  20. accelerator driven hybrid: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Rubbia, Carlo; Burgio, N; Carta, M; Santagata, A; Cinotti, L 2002-01-01 45 Thorium as a Fuel for Accelerator Driven Subcritical Electronuclear Systems CERN Preprints Summary:...

  1. ads accelerator driven: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Rubbia, Carlo; Burgio, N; Carta, M; Santagata, A; Cinotti, L 2002-01-01 19 Thorium as a Fuel for Accelerator Driven Subcritical Electronuclear Systems CERN Preprints Summary:...

  2. accelerator-driven transmutation technologies: Topics by E-print...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    as the European ADS technology demonstrator. Alex C. Mueller 2012-10-16 7 Thorium as a Fuel for Accelerator Driven Subcritical Electronuclear Systems CERN Preprints Summary:...

  3. accelerator driven reactors: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    discover a finite theta13 by observing Y. Obayashi 2008-07-25 39 Thorium as a Fuel for Accelerator Driven Subcritical Electronuclear Systems CERN Preprints Summary:...

  4. accelerator-driven transmutation technology: Topics by E-print...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    as the European ADS technology demonstrator. Alex C. Mueller 2012-10-16 7 Thorium as a Fuel for Accelerator Driven Subcritical Electronuclear Systems CERN Preprints Summary:...

  5. The Klynac: An Integrated Klystron and Linear Accelerator

    SciTech Connect (OSTI)

    Potter, J. M., Schwellenbach, D., Meidinger, A.

    2012-08-07T23:59:59.000Z

    The Klynac concept integrates an electron gun, a radio frequency (RF) power source, and a coupled-cavity linear accelerator into a single resonant system

  6. accelerated carbon ion: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    as test particles, and (2) non-linear systems such as the Earth's bow shock and the solar wind termination shock, where the accelerated ions strongly influence the...

  7. Neutrino physics at accelerators

    E-Print Network [OSTI]

    Enrique Fernandez

    2006-07-16T23:59:59.000Z

    Present and future neutrino experiments at accelerators are mainly concerned with understanding the neutrino oscillation phenomenon and its implications. Here a brief account of neutrino oscillations is given together with a description of the supporting data. Some current and planned accelerator neutrino experiments are also explained.

  8. Microscale acceleration history discriminators

    DOE Patents [OSTI]

    Polosky, Marc A. (Albuquerque, NM); Plummer, David W. (Albuquerque, NM)

    2002-01-01T23:59:59.000Z

    A new class of micromechanical acceleration history discriminators is claimed. These discriminators allow the precise differentiation of a wide range of acceleration-time histories, thereby allowing adaptive events to be triggered in response to the severity (or lack thereof) of an external environment. Such devices have applications in airbag activation, and other safety and surety applications.

  9. Accelerators (4/5)

    ScienceCinema (OSTI)

    None

    2011-10-06T23:59:59.000Z

    1a) Introduction and motivation 1b) History and accelerator types 2) Transverse beam dynamics 3a) Longitudinal beam dynamics 3b) Figure of merit of a synchrotron/collider 3c) Beam control 4) Main limiting factors 5) Technical challenges Prerequisite knowledge: Previous knowledge of accelerators is not required.

  10. Accelerators (5/5)

    ScienceCinema (OSTI)

    None

    2011-10-06T23:59:59.000Z

    1a) Introduction and motivation 1b) History and accelerator types 2) Transverse beam dynamics 3a) Longitudinal beam dynamics 3b) Figure of merit of a synchrotron/collider 3c) Beam control 4) Main limiting factors 5) Technical challenges Prerequisite knowledge: Previous knowledge of accelerators is not required.

  11. Safety of Accelerator Facilities

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-07-23T23:59:59.000Z

    To establish accelerator-specific safety requirements which, when supplemented by other applicable safety and health requirements, will serve to prevent injuries and illnesses associated with Department of Energy (DOE) or National Nuclear Security Administration (NNSA) accelerator operations. Cancels DOE O 420.2A. Certified 5-13-08. Canceled by DOE O 420.2C.

  12. Accelerators (3/5)

    ScienceCinema (OSTI)

    None

    2011-10-06T23:59:59.000Z

    1a) Introduction and motivation 1b) History and accelerator types 2) Transverse beam dynamics 3a) Longitudinal beam dynamics 3b) Figure of merit of a synchrotron/collider 3c) Beam control 4) Main limiting factors 5) Technical challenges Prerequisite knowledge: Previous knowledge of accelerators is not required.

  13. Safety of Accelerator Facilities

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-07-21T23:59:59.000Z

    The order defines accelerators and establishes accelerator specific safety requirements and approval authorities which, when supplemented by other applicable safety and health requirements, promote safe operations to ensure protection of workers, the public, and the environment. Cancels DOE O 420.2B.

  14. Safety of Accelerator Facilities

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-01-08T23:59:59.000Z

    To establish accelerator-specific safety requirements which, when supplemented by other applicable safety and health requirements, will serve to prevent injuries and illnesses associated with Department of Energy (DOE) or National Nuclear Security Administration (NNSA) accelerator operations. Cancels DOE O 420.2. Canceled by DOE O 420.2B.

  15. Accelerated Quantum Dynamics

    E-Print Network [OSTI]

    Lynch, Morgan H

    2015-01-01T23:59:59.000Z

    In this paper we establish a formalism for the computation of observables due to acceleration-induced particle physics processes. General expressions for the transition rate, multiplicity, power, spectra, and displacement law of particles undergoing time-dependent acceleration and transitioning into a final state of arbitrary particle number are obtained. The transition rate, power, and spectra are characterised by unique polynomials of multiplicity and thermal distributions of both bosonic and fermionic statistics. The acceleration dependent multiplicity is computed in terms of the branching fractions of the associated inertial processes. The displacement law of the spectra predicts the energy of the emitted particles are directly proportional to the accelerated temperature. These results extend our understanding of particle physics into the high acceleration sector.

  16. On Making Relational Division Comprehensible

    E-Print Network [OSTI]

    McCann, Lester I.

    pno jno qty S1 P1 J1 200 ... ... ... ... S5 P6 J4 500 FIE 2003 ­ p.8/33 #12;A More Practical Example,pno(SPJ) and pno(weight=17(P)) sno pno pno S1 P1 P2 S2 P3 P3 S2 P5 S3 P3 S3 P4 S4 P6 S5 P1 S5 P2 S5 P3 S5 P4 S5 P5 S5 P6 FIE 2003 ­ p.10/33 #12;Division in Relational Algebra Idea: Find the values that do

  17. Colorado Air Pollution Control Division - Construction Permits...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Web Site: Colorado Air Pollution Control Division - Construction Permits Forms and Air Pollutant Emission Notices (APENs)...

  18. EARTH SCIENCES DIVISION. ANNUAL REPORT 1977.

    E-Print Network [OSTI]

    Witherspoon, P.A.

    2011-01-01T23:59:59.000Z

    8erkeley Laboratory (LBL), the Earth Sciences Division, wasactivation analysis: rare earth element distribution (D)can be used to generate earth- quake records for use in

  19. Enforcement Letter, Westinghouse Waste Isolation Division - October...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to Westinghouse Waste Isolation Division related to Quality Assurance and Occupational Radiation Protection Noncompliances at the Waste Isolation Pilot Plant On October 3, 2000,...

  20. Sandia National Laboratories: Internal Combustion Engine Division...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Internal Combustion Engine Division conference CRF Researchers Received "Best Paper" Award for Paper Presented at American Society of Mechanical Engineers' (ASME) 2012 Internal...

  1. Chemical Sciences Division | Advanced Materials |ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    reduce costs, and minimize the environmental impact in the production of rare-earth metals and alloys. The division's Nuclear Analytical Chemistry and Isotopics...

  2. Physics Division ESH Bulletin 02-7 New Physics Division Procedure

    E-Print Network [OSTI]

    Physics Division ESH Bulletin 02-7 New Physics Division Procedure Applies to disablement of Physics-Interlock Disablement form is completed and given to the ESH Officer for filing 6/10/02 INTERLOCKS, TEMPORARY DISABLEMENT FILE maintained by Physics Division ESH Officer) #12;

  3. Inverse free-electron laser accelerator

    SciTech Connect (OSTI)

    Pellegrini, C.; Campisi, R.

    1982-01-01T23:59:59.000Z

    We first describe the basic physical properties of an inverse free-electron laser and make an estimate of the order of magnitude of the accelerating field obtainable with such a system; then apply the general ideas to the design of an actual device and through this example we give a more accurate evaluation of the fundamental as well as the technical limitations that this acceleration scheme imposes.

  4. Biological and medical research with accelerated heavy ions at the Bevalac, 1977-1980. [Lead abstract

    SciTech Connect (OSTI)

    Pirruccello, M.C.; Tobias, C.A. (eds.)

    1980-11-01T23:59:59.000Z

    Separate abstracts were prepared for the 46 papers presented in this progress report. This report is a major review of studies with accelerated heavy ions carried out by the Biology and Medicine Division of Lawrence Berkeley Laboratory from 1977 to 1980. (KRM)

  5. Life Sciences Division progress report for CYs 1997-1998 [Oak Ridge National Laboratory

    SciTech Connect (OSTI)

    Mann, Reinhold C.

    1999-06-01T23:59:59.000Z

    This is the first formal progress report issued by the ORNL Life Sciences Division. It covers the period from February 1997 through December 1998, which has been critical in the formation of our new division. The legacy of 50 years of excellence in biological research at ORNL has been an important driver for everyone in the division to do their part so that this new research division can realize the potential it has to make seminal contributions to the life sciences for years to come. This reporting period is characterized by intense assessment and planning efforts. They included thorough scrutiny of our strengths and weaknesses, analyses of our situation with respect to comparative research organizations, and identification of major thrust areas leading to core research efforts that take advantage of our special facilities and expertise. Our goal is to develop significant research and development (R&D) programs in selected important areas to which we can make significant contributions by combining our distinctive expertise and resources in the biological sciences with those in the physical, engineering, and computational sciences. Significant facilities in mouse genomics, mass spectrometry, neutron science, bioanalytical technologies, and high performance computing are critical to the success of our programs. Research and development efforts in the division are organized in six sections. These cluster into two broad areas of R&D: systems biology and technology applications. The systems biology part of the division encompasses our core biological research programs. It includes the Mammalian Genetics and Development Section, the Biochemistry and Biophysics Section, and the Computational Biosciences Section. The technology applications part of the division encompasses the Assessment Technology Section, the Environmental Technology Section, and the Toxicology and Risk Analysis Section. These sections are the stewards of the division's core competencies. The common mission of the division is to advance science and technology to understand complex biological systems and their relationship with human health and the environment.

  6. Systems Biology | Clean Energy | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of interdisciplinary scientists. Additional systems biology resources Research Highlights Media Mentions Publications Newsletters Biosciences Division Recent news releases 11...

  7. Jar mechanism accelerator

    SciTech Connect (OSTI)

    Anderson, E.A.; Webb, D.D.

    1989-07-11T23:59:59.000Z

    This patent describes an accelerator for use with a jar mechanism in a well pipe string to enhance the jarring impact delivered to a stuck object wherein the jar mechanism includes inner and outer members for connection, respectively, between the well pipe string the stuck object. The jar mechanism members are constructed to (1) restrict relative longitudinal movement therebetween to build up energy in the well pipe string and accelerator and then (2) to release the jar mechanism members for unrestrained, free relative longitudinal movement therebetween to engage jarring surfaces on the jar mechanism members for delivering a jarring impact to the stuck object. The accelerator includes: inner and outer telescopically connected members relatively movable longitudinally to accumulate energy in the accelerator; the inner and outer accelerator members each having means for connecting the accelerator in the well pipe string; means associated with the inner and outer members for initially accomodating a predetermined minimum length of unrestrained, free relative longitudinal movement between the inner and outer accelerator members.

  8. Research in the Earth System Science Division

    E-Print Network [OSTI]

    instrument being developed is based on inelastic neutron scattering reactions with carbon in soil. Gamma ray- rays that are emitted by it within picoseconds of interacting with a fast neutron. #12;Lucian

  9. Kolby Jeremiah Jardine Earth System Science Division

    E-Print Network [OSTI]

    Ajo-Franklin, Jonathan

    , Sommer E, Saleska S, Huxman T, Harley P & Abrell L (2010) Gas-phase measurements of pyruvic acid and its (2011) Ecosystem-scale compensation points of formic and acetic #12;acid in the central Amazon

  10. DIVISION 14 -CONVEYING SYSTEMS 14200 ELEVATORS

    E-Print Network [OSTI]

    O'Thompson ESCO CEMCO 3. Door Operators: GAL MAC 4. Door Protection: T.L. Jones Microscan II Janus relay, switch or other electrical component utilized, the diagrams shall identify each wiring terminal

  11. California Energy Commission Systems Assessment & Facilities Division

    E-Print Network [OSTI]

    ,000 1,500 2,000 2,500250 Miles Scale 1:30,000,000 GCS WGS 1984 Projection Legend Worldwide LNG Marine Worldwide Liquefied Natural Gas Marine Terminals June, 2010 T:\\Projects\\CEC\\World LNG FILENAME:World_ LNG_6

  12. Reactor and Nuclear Systems Division (RNSD)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeedingTechnicalPurchase,Reaction-Driven Restructuring of

  13. Chemical Technology Division annual technical report, 1990

    SciTech Connect (OSTI)

    Not Available

    1991-05-01T23:59:59.000Z

    Highlights of the Chemical Technology (CMT) Division's activities during 1990 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for coal- fired magnetohydrodynamics and fluidized-bed combustion; (3) methods for recovery of energy from municipal waste and techniques for treatment of hazardous organic waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for a high-level waste repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams, concentrating plutonium solids in pyrochemical residues by aqueous biphase extraction, and treating natural and process waters contaminated by volatile organic compounds; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also has a program in basic chemistry research in the areas of fluid catalysis for converting small molecules to desired products; materials chemistry for superconducting oxides and associated and ordered solutions at high temperatures; interfacial processes of importance to corrosion science, high-temperature superconductivity, and catalysis; and the geochemical processes responsible for trace-element migration within the earth's crust. The Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the scientific and engineering programs at Argonne National Laboratory (ANL). 66 refs., 69 figs., 6 tabs.

  14. Physics Division progress report for period ending September 30, 1985

    SciTech Connect (OSTI)

    Livingston, A.B. (ed.)

    1986-04-01T23:59:59.000Z

    This report covers the research and development activities of the Physics Division for the 1985 fiscal year. The research activities were centered on experimental nuclear physics, experimental atomic physics, and theoretical nuclear and atomic physics. The experimental nuclear physics program is dominated by heavy ion research. A major part of this effort is the responsibility for operating the Holifield Heavy Ion Research Facility as a national user facility. A major new activity described is the preparation for participation in an ultrarelativistic heavy ion experiment to be performed at CERN in 1986. The experimental atomic physics program has two components: the accelerator-based studies of basic collisional phenomena and the studies in support of the controlled fusion program. Also associated with the fusion-related studies are a plasma diagnostics program and the operation of an atomic physics data center. Theory efforts associated with the UNISOR program are described, as well as smaller programs in applications and high-energy physics. (LEW)

  15. West Virginia University Division of Human Resources

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    on the WVU Division of Human Resources Web page hr.wvu.edu. In the event of a conflict between the current posted version and this printed copy, the posted version on the Web page is controlling. Page 1 of 2 of this administrative procedure has been posted on the WVU Division of Human Resources Web page hr.wvu.edu. In the event

  16. West Virginia University Division of Human Resources

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    on the WVU Division of Human Resources Web page hr.wvu.edu. In the event of a conflict between the current posted version and this printed copy, the posted version on the Web page is controlling. Page 1 of 3 Division of Human Resources Web page hr.wvu.edu. In the event of a conflict between the current posted

  17. West Virginia University Division of Human Resources

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    on the WVU Division of Human Resources Web page hr.wvu.edu. In the event of a conflict between the current posted version and this printed copy, the posted version on the Web page is controlling. Page 1 of 2 been posted on the WVU Division of Human Resources Web page hr.wvu.edu. In the event of a conflict

  18. West Virginia University Division of Human Resources

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    Division of Human Resources Web page hr.wvu.edu. In the event of a conflict between the current posted version and this printed copy, the posted version on the Web page is controlling. Page 1 of 2 Employment been posted on the WVU Division of Human Resources Web page hr.wvu.edu. In the event of a conflict

  19. West Virginia University Division of Human Resources

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    Division of Human Resources Web page hr.wvu.edu. In the event of a conflict between the current posted version and this printed copy, the posted version on the Web page is controlling. Page 1 of 2 Access been posted on the WVU Division of Human Resources Web page hr.wvu.edu. In the event of a conflict

  20. Satellite Meteorology and Climatology Division Roadmap

    E-Print Network [OSTI]

    Kuligowski, Bob

    Satellite Meteorology and Climatology Division Roadmap NOAA NESDIS Center for Satellite Applications and Research #12;SMCD Roadmap 2 NOAA/NESDIS/STAR Satellite Meteorology and Climatology Division Roadmap September 2005 NOAA Science Center, 5200 Auth Road, Room 712, Camp Springs, MD 20746 #12;SMCD

  1. Nuclear Engineering Division Think, explore, discover, innovate

    E-Print Network [OSTI]

    Kemner, Ken

    : "Application of an Annular Metallic Fuel with Lower Gas Plenum for Sodium- cooled Fast Reactor") ANS N. Stauff Award ANS K. Laurin-Kovitz 2013 Best Paper Award in Reactor Physics Division (RPD) (Paper Title Nuclear Society E. Merzari, H. Ninokata(***) 2010 Best Paper in Reactor Physics Division (RPD) American

  2. Progress Report on Power Division Work Plan

    E-Print Network [OSTI]

    RPS & impacts on PNW · Analysis of negative wholesale power prices · Wind Integration Forum · Maintain balancing" DR pilot programs · Tracking Smart Grid Demo Project ­ ­ Will include "conventional" and "load/windProgress Report on Power Division Work Plan Power Committee Meeting October 2010 1 #12;The Division

  3. EMS Division Potential Benefits of Selected

    E-Print Network [OSTI]

    driven by a high speed gas turbine supplied power to a 400 HP superconductive homopolar motor during at Overcome by New Technology: Cryocoolers & Cu Fiber brushes2 #12;EMS Division Baseline with Multi-turn Field Coil Multi-turn Armature Cryostat Steel Flux Return #12;EMS Division Homopolar Motor Technology

  4. LEADERSHIP TRAINING DIVISION Undergraduate Program Application

    E-Print Network [OSTI]

    Emmons, Scott

    LEADERSHIP TRAINING DIVISION Undergraduate Program Application 1 For more information: Questions in school: College: School in Israel: (if applicable): Major/Minor: High School: #12;LEADERSHIP TRAINING DIVISION Undergraduate Program Application 2 QUEST LEADERSHIP FELLOWSHIP The mission of Quest is to inspire

  5. Materials Sciences Division 1990 annual report

    SciTech Connect (OSTI)

    Not Available

    1990-12-31T23:59:59.000Z

    This report is the Materials Sciences Division`s annual report. It contains abstracts describing materials research at the National Center for Electron Microscopy, and for research groups in metallurgy, solid-state physics, materials chemistry, electrochemical energy storage, electronic materials, surface science and catalysis, ceramic science, high tc superconductivity, polymers, composites, and high performance metals.

  6. PHYSICS DIVISION ESH BULLETIN 07-02

    E-Print Network [OSTI]

    , and sealed or open celled lead-acid. No batteries should be disposed of in the trash. HOW TO MANAGE USED the Division Waste Generator to dispose lead-acid (car) batteries or if you have any questions. ReferencePHYSICS DIVISION ESH BULLETIN 07-02 BATTERY RECYCLING May 21, 2007 ORNL recycles all types

  7. School of Art Division of Graphic Design

    E-Print Network [OSTI]

    Moore, Paul A.

    .372.7763 419.372.6955 fax lyoung@bgsu.edu www.bgsu.edu/art BOWLING GREEN STATE UNIVERSITY Division of Graphic.bgsu.edu/art BOWLING GREEN STATE UNIVERSITY 1) Be of Junior (60+ hours) or Senior (90+ hours) standing withinSchool of Art Division of Graphic Design 1020 Fine Arts Center Bowling Green, Ohio 43403-0204 419

  8. Fixed Income Division Nomura International plc

    E-Print Network [OSTI]

    Macrina, Andrea

    Fixed Income Division © Nomura International plc Symmetry methods for quadratic Gaussian models International plc Outline Motivation The quadratic Gaussian distribution The quadratic Gaussian process The quadratic Gaussian model #12;Fixed Income Division 3© Nomura International plc Part 1 Motivation #12;Fixed

  9. 1998 Chemical Technology Division Annual Technical Report.

    SciTech Connect (OSTI)

    Ackerman, J.P.; Einziger, R.E.; Gay, E.C.; Green, D.W.; Miller, J.F.

    1999-08-06T23:59:59.000Z

    The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials. In addition, the Division operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division's activities during 1998 are presented.

  10. Energy Division annual progress report for period ending September 30, 1991

    SciTech Connect (OSTI)

    Stone, J.N. [ed.

    1992-04-01T23:59:59.000Z

    The Energy Division is one of 17 research divisions at Oak Ridge Laboratory. Its goals and accomplishments are described in this annual progress report for FY 1991. The division`s total expenditures in FY 1991 were $39.1 million. The work is supported by the US Department of Energy, US Department of Defense, many other federal agencies, and some private organizations. Disciplines of the 124 technical staff members include engineering, social sciences, physical and life sciences, and mathematics and statistics. The Energy Division`s programmatic activities focus on three major areas: (1) analysis and assessment, (2) energy conservation technologies, and (3) military transportation systems. Analysis and assessment activities cover energy and resource analysis, the preparation of environmental assessments and impact statements, research on waste management, analysis of emergency preparedness for natural and technological disasters, analysis of the energy and environmental needs of developing countries, technology transfer, and analysis of civilian transportation. Energy conservation technologies include electric power systems, building equipment (thermally activated heat pumps, advanced refrigeration systems, novel cycles), building envelopes (walls, foundations, roofs, attics, and materials), and technical issues for improving energy efficiency in existing buildings. Military transportation systems concentrate on research for sponsors within the US military on improving the efficiency of military deployment, scheduling, and transportation coordination.

  11. Charged particle accelerator grating

    DOE Patents [OSTI]

    Palmer, R.B.

    1985-09-09T23:59:59.000Z

    A readily disposable and replaceable accelerator grating for a relativistic particle accelerator is described. The grating is formed for a plurality of liquid droplets that are directed in precisely positioned jet streams to periodically dispose rows of droplets along the borders of a predetermined particle beam path. A plurality of lasers are used to direct laser beams onto the droplets, at predetermined angles, thereby to excite the droplets to support electromagnetic accelerating resonances on their surfaces. Those resonances operate to accelerate and focus particles moving along the beam path. As the droplets are distorted or destroyed by the incoming radiation, they are replaced at a predetermined frequency by other droplets supplied through the jet streams.

  12. Accelerator on a Chip

    ScienceCinema (OSTI)

    England, Joel

    2014-07-16T23:59:59.000Z

    SLAC's Joel England explains how the same fabrication techniques used for silicon computer microchips allowed their team to create the new laser-driven particle accelerator chips. (SLAC Multimedia Communications)

  13. BNL | Accelerator Test Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and new approaches to particle acceleration and x-ray generation. A next-generation ultra-fast CO2 laser based on chirped pulse amplification in isotopic gas mixtures is...

  14. CEBAF accelerator achievements

    SciTech Connect (OSTI)

    Y.C. Chao, M. Drury, C. Hovater, A. Hutton, G.A. Krafft, M. Poelker, C. Reece, M. Tiefenback

    2011-06-01T23:59:59.000Z

    In the past decade, nuclear physics users of Jefferson Lab's Continuous Electron Beam Accelerator Facility (CEBAF) have benefited from accelerator physics advances and machine improvements. As of early 2011, CEBAF operates routinely at 6 GeV, with a 12 GeV upgrade underway. This article reports highlights of CEBAF's scientific and technological evolution in the areas of cryomodule refurbishment, RF control, polarized source development, beam transport for parity experiments, magnets and hysteresis handling, beam breakup, and helium refrigerator operational optimization.

  15. Breakthrough: Fermilab Accelerator Technology

    ScienceCinema (OSTI)

    None

    2014-08-12T23:59:59.000Z

    There are more than 30,000 particle accelerators in operation around the world. At Fermilab, scientists are collaborating with other laboratories and industry to optimize the manufacturing processes for a new type of powerful accelerator that uses superconducting niobium cavities. Experimenting with unique polishing materials, a Fermilab team has now developed an efficient and environmentally friendly way of creating cavities that can propel particles with more than 30 million volts per meter.

  16. APT accelerator technology

    SciTech Connect (OSTI)

    Schneider, J.D.

    1996-09-01T23:59:59.000Z

    Proposed accelerator production of tritium (APT) project requires an accelerator providing a cw proton beam of 100 mA at 1300 MeV. Since most of the technical risk of a high-current cw (continuous-wave, 100% DF) accelerator resides in the low-energy section, Los Alamos is building a 20 MeV duplicate of the accelerator front end to confirm design codes, beam performance, and demonstrate operaional reliability. We report on design details of this low-energy demonstration accelerator (LEDA) and discuss the integrated design of the full accelerator for the APT plant. LEDA`s proton injector is under test and has produced more than 130 mA at 75 keV. Fabrication is proceeding on a 6.7-KeV, 8-m long RFQ, and detailed design is underway on coupled-cavity drift-tube linac (CCDTL) structures. Detailed design and technology experiments are underway on medium-beta superconducting cavities to assess feasibility of replacing the conventional (room-temperature copper) high-energy linac with a linac made of niobium superconducting RF cavities.

  17. Earth Sciences Division Research Summaries 2006-2007

    E-Print Network [OSTI]

    DePaolo, Donald

    2008-01-01T23:59:59.000Z

    the commencement of the Earth Sciences Division 30 yearstelling. Happy Anniversary! Earth Sciences Division ears YTritium in Engineered and Earth Materials Stefan Finsterle,

  18. APS Engineering Support Division (AES) | Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    APS Engineering Support Division (AES) The APS Engineering Support Division provides reliable operations and technical support to the Advanced Photon Source user community. AES...

  19. Energy Division annual progress report for period ending September 30, 1993

    SciTech Connect (OSTI)

    Wolff, P.P. [ed.

    1994-07-01T23:59:59.000Z

    One of 17 research divisions at Oak Ridge National Laboratory, Energy Division`s mission is to provide innovative solutions to energy and related issues of national and global importance through interdisciplinary research and development. Its goals and accomplishments are described in this annual progress report for FY1993. Energy Division is committed to (1) understanding the mechanisms by which societies make choices in energy use; (2) improving society`s understanding of the environmental, social, and economic implications of technological change; (3) developing and transferring energy-efficient technologies; (4) improving transportation policy and planning; (5) enhancing basic knowledge in the social sciences as related to energy and associated issues. Energy Division`s expenditures in FY1993 totaled $42 million. The work was supported by the US DOE, DOD, many other federal agencies, and some private organizations. Disciplines of the 126.5 technical staff members include engineering, social sciences, physical and life sciences, and computer sciences and data systems. The division`s programmatic activities cover three main areas: (1) analysis and assessment, (2) energy use and delivery technologies, and (3) transportation systems. Analysis and assessment activities involve energy and resource analysis, preparation of environmental assessments and impact statements, research on emergency preparedness, transportation analysis, and analysis of energy and environmental needs in developing countries. Energy use and delivery technologies focus on electric power systems, building equipment, building envelopes (walls, foundations, roofs, attics, and materials), and methods to improve energy efficiency in existing buildings. Transportation systems research is conducted both to improve the quality of civilian transportation and for sponsors within the US military to improve the efficiency of deployment, scheduling, and transportation coordination.

  20. Plasma-based accelerator structures

    SciTech Connect (OSTI)

    Schroeder, Carl B.

    1999-12-01T23:59:59.000Z

    Plasma-based accelerators have the ability to sustain extremely large accelerating gradients, with possible high-energy physics applications. This dissertation further develops the theory of plasma-based accelerators by addressing three topics: the performance of a hollow plasma channel as an accelerating structure, the generation of ultrashort electron bunches, and the propagation of laser pulses is underdense plasmas.

  1. Physically Based Rendering Intersection Acceleration

    E-Print Network [OSTI]

    Kazhdan, Michael

    Physically Based Rendering (600.657) Intersection Acceleration #12;Intersection Testing Accelerated partitions: Group objects into clusters Cluster volumes may overlap #12;Uniform (Voxel) Grid Acceleration Acceleration · Trace rays through grid cells ­ Fast ­ Incremental A B C D E F Only check primitives

  2. Chemical Technology Division annual technical report, 1992

    SciTech Connect (OSTI)

    Battles, J.E.; Myles, K.M.; Laidler, J.J.; Green, D.W.

    1993-06-01T23:59:59.000Z

    In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous waste, mixed hazardous/radioactive waste, and municipal solid waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams, treating water contaminated with volatile organics, and concentrating radioactive waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (EFR); (7) processes for removal of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials (corium; Fe-U-Zr, tritium in LiAlO{sub 2} in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources and novel` ceramic precursors; materials chemistry of superconducting oxides, electrified metal/solution interfaces, and molecular sieve structures; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).

  3. Fermilab | Science | Particle Accelerators | Fermilab's Accelerator Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHall A ThisFermilab's Accelerator Complex photo

  4. Fermilab | Science | Particle Accelerators | Leading Accelerator Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItem NotEnergy,ARMFormsGasReleaseSpeechesHall A ThisFermilab's Accelerator ComplexLeading

  5. Accelerating DSMC data extraction.

    SciTech Connect (OSTI)

    Gallis, Michail A.; Piekos, Edward Stanley

    2006-10-01T23:59:59.000Z

    In many direct simulation Monte Carlo (DSMC) simulations, the majority of computation time is consumed after the flowfield reaches a steady state. This situation occurs when the desired output quantities are small compared to the background fluctuations. For example, gas flows in many microelectromechanical systems (MEMS) have mean speeds more than two orders of magnitude smaller than the thermal speeds of the molecules themselves. The current solution to this problem is to collect sufficient samples to achieve the desired resolution. This can be an arduous process because the error is inversely proportional to the square root of the number of samples so we must, for example, quadruple the samples to cut the error in half. This work is intended to improve this situation by employing more advanced techniques, from fields other than solely statistics, for determining the output quantities. Our strategy centers on exploiting information neglected by current techniques, which collect moments in each cell without regard to one another, values in neighboring cells, nor their evolution in time. Unlike many previous acceleration techniques that modify the method itself, the techniques examined in this work strictly post-process so they may be applied to any DSMC code without affecting its fidelity or generality. Many potential methods are drawn from successful applications in a diverse range of areas, from ultrasound imaging to financial market analysis. The most promising methods exploit relationships between variables in space, which always exist in DSMC due to the absence of shocks. Disparate techniques were shown to produce similar error reductions, suggesting that the results shown in this report may be typical of what is possible using these methods. Sample count reduction factors of approximately three to five were found to be typical, although factors exceeding ten were shown on some variables under some techniques.

  6. Energy Division annual progress report for period ending September 30, 1992

    SciTech Connect (OSTI)

    Counce, D.M.; Wolff, P.P. [eds.

    1993-04-01T23:59:59.000Z

    Energy Division`s mission is to provide innovative solutions to energy and related Issues of national and global importance through interdisciplinary research and development. Its goals and accomplishments are described in this annual progress report for FY 1992. Energy Division`s total expenditures in FY 1992 were $42.8 million. The work is supported by the US Department of Energy, the US Department of Defense, many other federal agencies, and some private organizations. Disciplines of the 116.5 technical staff members include engineering, social sciences, physical and life sciences, and mathematics and statistics. The division`s programmatic activities cover three main areas: (1) analysis and assessment, (2) energy conservation technologies, and (3) military transportation systems. Analysis and assessment activities involve energy and resource analysis, preparation of environmental assessments and impact statements, research on waste management, technology transfer, analysis of energy and environmental needs in developing countries, and civilian transportation analysis. Energy conservation technologies focus on electric power systems, building envelopes (walls, foundations, roofs, attics, and materials), and methods to improve energy efficiency in existing buildings. Military transportation systems conduct research for sponsors within the US military to improve the efficiency of military deployment, scheduling, and transportation coordination. Much of Energy Division`s research is valuable to other organizations as well as to sponsors. This information is disseminated by the staff`s involvement in professional and trade organizations and workshops; joint research with universities and private-sector firms; collaboration with state and local governments; presentation of work at conferences; and publication of research results in journals, reports, and conference proceedings.

  7. Biology and Medicine Division: Annual report 1986

    SciTech Connect (OSTI)

    Not Available

    1987-04-01T23:59:59.000Z

    The Biology and Medicine Division continues to make important contributions in scientific areas in which it has a long-established leadership role. For 50 years the Division has pioneered in the application of radioisotopes and charged particles to biology and medicine. There is a growing emphasis on cellular and molecular applications in the work of all the Division's research groups. The powerful tools of genetic engineering, the use of recombinant products, the analytical application of DNA probes, and the use of restriction fragment length polymorphic DNA are described and proposed for increasing use in the future.

  8. Chemical Sciences Division annual report 1994

    SciTech Connect (OSTI)

    NONE

    1995-06-01T23:59:59.000Z

    The division is one of ten LBL research divisions. It is composed of individual research groups organized into 5 scientific areas: chemical physics, inorganic/organometallic chemistry, actinide chemistry, atomic physics, and chemical engineering. Studies include structure and reactivity of critical reaction intermediates, transients and dynamics of elementary chemical reactions, and heterogeneous and homogeneous catalysis. Work for others included studies of superconducting properties of high-{Tc} oxides. In FY 1994, the division neared completion of two end-stations and a beamline for the Advanced Light Source, which will be used for combustion and other studies. This document presents summaries of the studies.

  9. Earth Sciences Division collected abstracts: 1979

    SciTech Connect (OSTI)

    Henry, A.L.; Schwartz, L.L.

    1980-04-30T23:59:59.000Z

    This report is a compilation of abstracts of papers, internal reports, and talks presented during 1979 at national and international meetings by members of the Earth Sciences Division, Lawrence Livermore Laboratory. The arrangement is alphabetical (by author). For a given report, a bibliographic reference appears under the name of each coauthor, but the abstract iself is given only under the name of the first author or the first Earth Sciences Division author. A topical index at the end of the report provides useful cross references, while indicating major areas of research interest in the Earth Sciences Division.

  10. MP-Division health and safety reference handbook. [Contains glossary

    SciTech Connect (OSTI)

    Putnam, T.M.

    1987-09-01T23:59:59.000Z

    This report presents the objectives, organization, policies, and essential rules and procedures that have been adopted by MP Division and that form the basis of the Health and Safety Program of the Clinton P. Anderson Meson Physics Facility (LAMPF). The facility includes the beam-delivery systems for the Los Alamos Neutron Scattering Center and the Weapons Neutron Research Facility (LANSCE/WNR). The program is designed not only to assure the health and safety of all personnel, including users, in their work at LAMPF, and of MP-Division staff in their work on the LANSCE/WNR beam lines, but also to protect the facility (buildings and equipment) and the environment. 33 refs., 18 figs., 2 tabs.

  11. Systems Signals The newsletter of the Institute for Systems Research

    E-Print Network [OSTI]

    Shapiro, Benjamin

    project, Operational Meth- ods in Semiconductor Manufacturing: Integrating Product Dynamics and Process and Product Systems Division and the Semiconductor Research Corporation's Factory Sciences Division. Its's inside Bridge Baron........... 3 CATS ........................2 NSF survey .............7 Faculty news

  12. I am very pleased to announce today the appointment of Andrew Peterson as EHS Assurance Manager for the Environmental Health and Safety Division at LBNL. Please join me in welcoming

    E-Print Network [OSTI]

    Knowles, David William

    Manager for the Environmental Health and Safety Division at LBNL. Please join me in welcoming Andrew as a key interface between LBNL EHS and the DOE Berkeley Site Office. Andrew has a Master's Degree Sciences Division's implementation of LBNL's EHS systems and managed the Division's Self Assessment program

  13. Perturbations for transient acceleration

    SciTech Connect (OSTI)

    Vargas, Cristofher Zuñiga; Zimdahl, Winfried [Universidade Federal do Espírito Santo, Departamento de Física, Av. Fernando Ferrari, 514, Campus de Goiabeiras, CEP 29075-910, Vitória, Espírito Santo (Brazil); Hipólito-Ricaldi, Wiliam S., E-mail: win_unac@hotmail.com, E-mail: hipolito@ceunes.ufes.br, E-mail: winfried.zimdahl@pq.cnpq.br [Universidade Federal do Espírito Santo, Departamento de Ciências Naturais, Grupo de Física Teórica, Rodovia BR 101 Norte, km 60, Campus de São Mateus, CEP 29932-540, São Mateus, Espírito Santo (Brazil)

    2012-04-01T23:59:59.000Z

    According to the standard ?CDM model, the accelerated expansion of the Universe will go on forever. Motivated by recent observational results, we explore the possibility of a finite phase of acceleration which asymptotically approaches another period of decelerated expansion. Extending an earlier study on a corresponding homogeneous and isotropic dynamics, in which interactions between dark matter and dark energy are crucial, the present paper also investigates the dynamics of the matter perturbations both on the Newtonian and General Relativistic (GR) levels and quantifies the potential relevance of perturbations of the dark-energy component. In the background, the model is tested against the Supernova type Ia (SNIa) data of the Constitution set and on the perturbative level against growth rate data, among them those of the WiggleZ survey, and the data of the 2dFGRS project. Our results indicate that a transient phase of accelerated expansion is not excluded by current observations.

  14. HIGH GRADIENT INDUCTION ACCELERATOR

    SciTech Connect (OSTI)

    Caporaso, G J; Sampayan, S; Chen, Y; Blackfield, D; Harris, J; Hawkins, S; Holmes, C; Krogh, M; Nelson, S; Nunnally, W; Paul, A; Poole, B; Rhodes, M; Sanders, D; Selenes, K; Sullivan, J; Wang, L; Watson, J

    2007-06-21T23:59:59.000Z

    A new type of compact induction accelerator is under development at the Lawrence Livermore National Laboratory that promises to increase the average accelerating gradient by at least an order of magnitude over that of existing induction machines. The machine is based on the use of high gradient vacuum insulators, advanced dielectric materials and switches and is stimulated by the desire for compact flash x-ray radiography sources. Research describing an extreme variant of this technology aimed at proton therapy for cancer will be described. Progress in applying this technology to several applications will be reviewed.

  15. Financial Services Division of Administration & Finance

    E-Print Network [OSTI]

    de Lijser, Peter

    Financial Services Division of Administration & Finance (657) 278-2512 / Fax (714) 278: May Wong / Financial Services (CP-300). Instructions are at Questions? Email Directive11@fullerton.eduwww.finance

  16. Export Controls Compliance Division of Research

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    Export Controls Compliance Division of Research of this document is to provide overall guidance on export control regulations and internal procedures information contained in their Export Control Compliance programs in the development of this document. #12

  17. EARTH SCIENCES DIVISION ANNUAL REPORT 1978

    E-Print Network [OSTI]

    Authors, Various

    2012-01-01T23:59:59.000Z

    of electrolytes: IX, rare earth chlorides, nitrates, andU E OF AQUIFER RESPONSE TO EARTH TIDES AS A MEANS O F SLawrence Berkeley Laboratory, Earth Sciences Division, 1977.

  18. EARTH SCIENCES DIVISION ANNUAL REPORT 1978

    E-Print Network [OSTI]

    Authors, Various

    2012-01-01T23:59:59.000Z

    of Energy's Division of Geothermal Energy has undertaken aand Ghormley, E. L. , 1976. Geothermal energy conversion andi a , Mexico, i n Geothermal energy: a n o v e l t y becomes

  19. Community Development Department Building & Safety Division

    E-Print Network [OSTI]

    BUILDING, RESIDENTIAL AND GREEN BUILDING CODES, AMENDING FREMONT MUNICIPAL CODE TITLE vn (BUILDING TO ENERGY REGULATIONS THE 2010 CALIFORNIA,GREEN BUILDING CODE The City of Fremont proposed to adopt local................ Community Development Department Building & Safety Division 39550 Liberty Street

  20. Energy Research and Development Division STAFF REPORT

    E-Print Network [OSTI]

    Energy Research and Development Division STAFF REPORT NATURAL GAS RESEARCH AND DEVELOPMENT 2013 Annual Report CALIFORNIA ENERGY COMMISSION Edmund G. Brown Jr., Governor OCTOBER 2013 CEC5002013111 #12; CALIFORNIA ENERGY COMMISSION Linda Schrupp Primary Authors Prepared for: California

  1. Argonne National Decision and Information Sciences Division

    E-Print Network [OSTI]

    Argonne National Laboratory Decision and Information Sciences Division Introducing EMTools conforms to expecta- tions. Argonne National Laboratory, developer of the successful Synchronization Matrix and exercise tool: EMTools. EMTools integrates the func- tionality of Argonne's previous-generation emergency

  2. Materials Sciences Division Integrated Safety Management Plan

    E-Print Network [OSTI]

    Materials Sciences Division Integrated Safety Management Plan Revised: February 9, 2012 Prepared by: signed Feb. 9, 2012 Rick Kelly, Facility/EH&S Manager Submitted by: signed Feb. 9, 2012 Miquel Salmeron.1 RESPONSIBILITY AND AUTHORITY THROUGH LINE MANAGEMENT............................................................5

  3. UNIVERSITY OF CALIFORNIA, SANTA CRUZ DIVISION OF GRADUATE STUDIES

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    and Graduate Division coordination of efforts to increase graduate support and postdoctoral placement through

  4. Accelerator Driven Nuclear Energy: The Thorium Option

    SciTech Connect (OSTI)

    Raja, Rajendran

    2009-03-18T23:59:59.000Z

    Conventional nuclear reactors use enriched Uranium as fuel and produce nuclear waste which needs to be stored away for over 10,000 years. At the current rate of use, existing sources of Uranium will last for 50-100 years. We describe a solution to the problem that uses particle accelerators to produce fast neutrons that can be used to burn existing nuclear waste and produce energy. Such systems, initially proposed by Carlo Rubbia and collaborators in the 1990's, are being seriously considered by many countries as a possible solution to the green energy problem. Accelerator driven reactors operate in a sub-critical regime and, thus, are safer and can obtain energy from plentiful elements such as Thorium-232 and Uranium-238. What is missing is the high intensity (10MW) accelerator that produces 1 GeV protons. We will describe scenarios which if implemented will make such systems a reality.

  5. Accelerator Driven Nuclear Energy - The Thorium Option

    SciTech Connect (OSTI)

    Rajendran Raja

    2009-03-18T23:59:59.000Z

    Conventional nuclear reactors use enriched Uranium as fuel and produce nuclear waste which needs to be stored away for over 10,000 years.   At the current rate of use, existing sources of Uranium will last for 50-100 years.  We describe a solution to the problem that uses particle accelerators to produce fast neutrons that can be used to burn existing nuclear waste and produce energy.  Such systems, initially proposed by Carlo Rubbia and collaborators in the 1990's, are being seriously considered by many countries as a possible solution to the green energy problem.  Accelerator driven reactors operate in a sub-critical regime and, thus, are safer and can obtain energy from plentiful elements such as Thorium-232 and Uranium-238. What is missing is the high intensity (10MW) accelerator that produces 1 GeV protons. We will describe scenarios which if implemented will make such systems a reality.  

  6. Accelerator Driven Nuclear Energy - The Thorium Option

    ScienceCinema (OSTI)

    Rajendran Raja

    2010-01-08T23:59:59.000Z

    Conventional nuclear reactors use enriched Uranium as fuel and produce nuclear waste which needs to be stored away for over 10,000 years.   At the current rate of use, existing sources of Uranium will last for 50-100 years.  We describe a solution to the problem that uses particle accelerators to produce fast neutrons that can be used to burn existing nuclear waste and produce energy.  Such systems, initially proposed by Carlo Rubbia and collaborators in the 1990's, are being seriously considered by many countries as a possible solution to the green energy problem.  Accelerator driven reactors operate in a sub-critical regime and, thus, are safer and can obtain energy from plentiful elements such as Thorium-232 and Uranium-238. What is missing is the high intensity (10MW) accelerator that produces 1 GeV protons. We will describe scenarios which if implemented will make such systems a reality.  

  7. Organization of ISI by Divisions and Constituent Units Information Sciences Division

    E-Print Network [OSTI]

    Bandyopadhyay, Antar

    Biological Sciences Division Agricultural and Ecological Research Unit Human Genetics Unit Biological Unit Canteen Security Unit Medical Welfare Unit Telephone Unit Transport Unit Guest House Audio Visual

  8. Earth Sciences Division annual report 1989

    SciTech Connect (OSTI)

    Not Available

    1990-06-01T23:59:59.000Z

    This Annual Report presents summaries of selected representative research activities from Lawrence Berkeley Laboratory grouped according to the principal disciplines of the Earth Sciences Division: Reservoir Engineering and Hydrology, Geology and Geochemistry, and Geophysics and Geomechanics. We are proud to be able to bring you this report, which we hope will convey not only a description of the Division's scientific activities but also a sense of the enthusiasm and excitement present today in the Earth Sciences.

  9. Weapons Experiments Division Explosives Operations Overview

    SciTech Connect (OSTI)

    Laintz, Kenneth E. [Los Alamos National Laboratory

    2012-06-19T23:59:59.000Z

    Presentation covers WX Division programmatic operations with a focus on JOWOG-9 interests. A brief look at DARHT is followed by a high level overview of explosives research activities currently being conducted within in the experimental groups of WX-Division. Presentation covers more emphasis of activities and facilities at TA-9 as these efforts have been more traditionally aligned with ongoing collaborative explosive exchanges covered under JOWOG-9.

  10. Earth Sciences Division collected abstracts: 1980

    SciTech Connect (OSTI)

    Henry, A.L.; Hornady, B.F. (eds.)

    1981-10-15T23:59:59.000Z

    This report is a compilation of abstracts of papers, reports, and talks presented during 1980 at national and international meetings by members of the Earth Sciences Division, Lawrence Livermore National Laboratory. The arrangement is alphabetical (by author). For a given report, a bibliographic reference appears under the name of each coauthor, but the abstract itself is given only under the name of the first author (indicated in capital letters) or the first Earth Sciences Division author.

  11. Magnet Division Note: AMNO328 Magnet Division Note: AMNO328

    E-Print Network [OSTI]

    Ohta, Shigemi

    .........................................................................................................................30 8. Cold Mass Heat Leak Calculations at 4°K....................................................................................................37 Total Heat Load to 4 K System

  12. Biology Division progress report, October 1, 1991--September 30, 1993

    SciTech Connect (OSTI)

    Hartman, F.C.; Cook, J.S.

    1993-10-01T23:59:59.000Z

    This Progress Report summarizes the research endeavors of the Biology Division of the Oak Ridge National Laboratory during the period October 1, 1991, through September 30, 1993. The report is structured to provide descriptions of current activities and accomplishments in each of the Division`s major organizational units. Lists of information to convey the entire scope of the Division`s activities are compiled at the end of the report.

  13. Environmental Education and Development Division (EM-522). Annual report, Fiscal year 1993

    SciTech Connect (OSTI)

    Not Available

    1993-12-31T23:59:59.000Z

    The Environmental Education and Development Division (EM-522) is one of three divisions within the Office of Technology Integration and Environmental Education and Development (EM-52) in Environmental Restoration and Waste Management`s (EM`s) Office of Technology Development (EM-50). The primary design criterion for EM-522 education activities is directly related to meeting EM`s goal of environmental compliance on an accelerated basis and cleanup of the 1989 inventory of inactive sites and facilities by the year 2019. Therefore, EM-522`s efforts are directed specifically toward stimulating knowledge and capabilities to achieve the goals of EM while contributing to DOE`s overall goal of increasing scientific, mathematical, and technical literacy and competency. This report discusses fiscal year 1993 activities.

  14. Physics, Computer Science and Mathematics Division. Annual report, January 1-December 31, 1980

    SciTech Connect (OSTI)

    Birge, R.W.

    1981-12-01T23:59:59.000Z

    Research in the physics, computer science, and mathematics division is described for the year 1980. While the division's major effort remains in high energy particle physics, there is a continually growing program in computer science and applied mathematics. Experimental programs are reported in e/sup +/e/sup -/ annihilation, muon and neutrino reactions at FNAL, search for effects of a right-handed gauge boson, limits on neutrino oscillations from muon-decay neutrinos, strong interaction experiments at FNAL, strong interaction experiments at BNL, particle data center, Barrelet moment analysis of ..pi..N scattering data, astrophysics and astronomy, earth sciences, and instrument development and engineering for high energy physics. In theoretical physics research, studies included particle physics and accelerator physics. Computer science and mathematics research included analytical and numerical methods, information analysis techniques, advanced computer concepts, and environmental and epidemiological studies. (GHT)

  15. A GPU-INSPIRED SOFT PROCESSOR FOR HIGH-THROUGHPUT ACCELERATION

    E-Print Network [OSTI]

    Steffan, J. Gregory

    Methodology 35 6.1 System Simulation . . . . . . . A GPU-INSPIRED SOFT PROCESSOR FOR HIGH-THROUGHPUT ACCELERATION by Jeffrey Richard Code Kingyens Code Kingyens #12;Abstract A GPU-Inspired Soft Processor for High-Throughput Acceleration Jeffrey

  16. Vacuum Insulator Development for the Dielectric Wall Accelerator

    SciTech Connect (OSTI)

    Harris, J R; Blackfield, D; Caporaso, G J; Chen, Y; Hawkins, S; Kendig, M; Poole, B; Sanders, D M; Krogh, M; Managan, J E

    2008-03-17T23:59:59.000Z

    At Lawrence Livermore National Laboratory, we are developing a new type of accelerator, known as a Dielectric Wall Accelerator, in which compact pulse forming lines directly apply an accelerating field to the beam through an insulating vacuum boundary. The electrical strength of this insulator may define the maximum gradient achievable in these machines. To increase the system gradient, we are using 'High Gradient Insulators' composed of alternating layers of dielectric and metal for the vacuum insulator. In this paper, we present our recent results from experiment and simulation, including the first test of a High Gradient Insulator in a functioning Dielectric Wall Accelerator cell.

  17. A DNA damage checkpoint in Caulobacter crescentus inhibits cell division through a direct interaction with FtsW

    E-Print Network [OSTI]

    Modell, Joshua Wexler

    Following DNA damage, cells typically delay cell cycle progression and inhibit cell division until their chromosomes have been repaired. The bacterial checkpoint systems responsible for these DNA damage responses are ...

  18. Energy Division annual progress report for period ending September 30, 1990

    SciTech Connect (OSTI)

    Selden, R.H. (ed.)

    1991-06-01T23:59:59.000Z

    The Energy Division is one of 17 research divisions at Oak Ridge National Laboratory. The goals and accomplishments of the Energy Division are described in this annual progress report for FY 1990. The Energy Division is a multidisciplinary research organization committed to (1) increasing the knowledge and understanding of how societies make choices in energy use; (2) improving society's understanding of the environmental, social, and economic implications of technological change; (3) developing and transferring energy efficient technologies; and (4) developing improved transportation planning and policy. Disciplines of the 129 staff members include engineering, social sciences, physical and life sciences, and mathematics and statistics. The Energy Division's programmatic activities focus on three major areas: (1) analysis and assessment, (2) energy conservation technologies, and (3) military transportation systems. Analysis and assessment activities cover energy and resource analysis, the preparation of environmental assessments and impact statements, research on waste management, analysis of emergency preparedness for natural and technological disasters, analysis of the energy and environmental needs of developing countries, technology transfer, and analysis of civilian transportation. Energy conservation technologies include building equipment (thermally activated heat pumps, chemical heat pumps, refrigeration systems, novel cycles), building enveloped (walls, foundations, roofs, attics, and materials), retrofits for existing buildings, and electric power systems. Military transportation systems concentrate on research for sponsors within the US military on improving the efficiency of military deployment, scheduling, and transportation coordination. 48 refs., 34 figs., 7 tabs.

  19. Beam-driven acceleration in ultra-dense plasma media

    SciTech Connect (OSTI)

    Shin, Young-Min [Fermi National Accelerator Laboratory, Batavia, IL (United States)

    2014-09-12T23:59:59.000Z

    Accelerating parameters of beam-driven wakefield acceleration in an extremely dense plasma column has been analyzed with the dynamic framed particle-in-cell plasma simulator, and compared with analytic calculations. In the model, a witness beam undergoes a TeV/m scale alternating potential gradient excited by a micro-bunched drive beam in a 1025 m-3 and 1.6 x 1028 m-3 plasma column. The acceleration gradient, energy gain, and transformer ratio have been extensively studied in quasi-linear, linear-, and blowout-regimes. The simulation analysis indicated that in the beam-driven acceleration system a hollow plasma channel offers 20 % higher acceleration gradient by enlarging the channel radius (r) from 0.2 Ap to 0.6 .Ap in a blowout regime. This paper suggests a feasibility of TeV/m scale acceleration with a hollow crystalline structure (e.g. nanotubes) of high electron plasma density.

  20. Beam-driven acceleration in ultra-dense plasma media

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Shin, Young-Min [Fermi National Accelerator Laboratory, Batavia, IL (United States)

    2014-09-15T23:59:59.000Z

    Accelerating parameters of beam-driven wakefield acceleration in an extremely dense plasma column has been analyzed with the dynamic framed particle-in-cell plasma simulator, and compared with analytic calculations. In the model, a witness beam undergoes a TeV/m scale alternating potential gradient excited by a micro-bunched drive beam in a 1025 m-3 and 1.6 x 1028 m-3 plasma column. The acceleration gradient, energy gain, and transformer ratio have been extensively studied in quasi-linear, linear-, and blowout-regimes. The simulation analysis indicated that in the beam-driven acceleration system a hollow plasma channel offers 20 % higher acceleration gradient by enlarging the channel radius (r) from 0.2 ?p to 0.6 ?p in a blowout regime. This paper suggests a feasibility of TeV/m scale acceleration with a hollow crystalline structure (e.g. nanotubes) of high electron plasma density.

  1. Beam-driven acceleration in ultra-dense plasma media

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Shin, Young-Min

    2014-09-15T23:59:59.000Z

    Accelerating parameters of beam-driven wakefield acceleration in an extremely dense plasma column has been analyzed with the dynamic framed particle-in-cell plasma simulator, and compared with analytic calculations. In the model, a witness beam undergoes a TeV/m scale alternating potential gradient excited by a micro-bunched drive beam in a 1025 m-3 and 1.6 x 1028 m-3 plasma column. The acceleration gradient, energy gain, and transformer ratio have been extensively studied in quasi-linear, linear-, and blowout-regimes. The simulation analysis indicated that in the beam-driven acceleration system a hollow plasma channel offers 20 % higher acceleration gradient by enlarging the channel radius (r)more »from 0.2 ?p to 0.6 ?p in a blowout regime. This paper suggests a feasibility of TeV/m scale acceleration with a hollow crystalline structure (e.g. nanotubes) of high electron plasma density.« less

  2. Deuterium accelerator experiments for APT.

    SciTech Connect (OSTI)

    Causey, Rion A. (Sandia National Laboratories, Livermore, CA); Hertz, Kristin L. (Sandia National Laboratories, Livermore, CA); Cowgill, Donald F. (Sandia National Laboratories, Livermore, CA)

    2005-08-01T23:59:59.000Z

    Sandia National Laboratories in California initiated an experimental program to determine whether tritium retention in the tube walls and permeation through the tubes into the surrounding coolant water would be a problem for the Accelerator Production of Tritium (APT), and to find ways to mitigate the problem, if it existed. Significant holdup in the tube walls would limit the ability of APT to meet its production goals, and high levels of permeation would require a costly cleanup system for the cooling water. To simulate tritium implantation, a 200 keV accelerator was used to implant deuterium into Al 6061-T and SS3 16L samples at temperatures and particle fluxes appropriate for APT, for times varying between one week and five months. The implanted samples were characterized to determine the deuterium retention and Permeation. During the implantation, the D(d,p)T nuclear reaction was used to monitor the build-up of deuterium in the implant region of the samples. These experiments increased in sophistication, from mono-energetic deuteron implants to multi-energetic deuteron and proton implants, to more accurately reproduce the conditions expected in APT. Micron-thick copper, nickel, and anodized aluminum coatings were applied to the front surface of the samples (inside of the APT walls) in an attempt to lower retention and permeation. The reduction in both retention and permeation produced by the nickel coatings, and the ability to apply them to the inside of the APT tubes, indicate that both nickel-coated Al 6061-T6 and nickel-coated SS3 16L tubes would be effective for use in APT. The results of this work were submitted to the Accelerator Production of Tritium project in document number TPO-E29-Z-TNS-X-00050, APT-MP-01-17.

  3. Variable-energy drift-tube linear accelerator

    DOE Patents [OSTI]

    Swenson, Donald A. (Los Alamos, NM); Boyd, Jr., Thomas J. (Los Alamos, NM); Potter, James M. (Los Alamos, NM); Stovall, James E. (Los Alamos, NM)

    1984-01-01T23:59:59.000Z

    A linear accelerator system includes a plurality of post-coupled drift-tubes wherein each post coupler is bistably positionable to either of two positions which result in different field distributions. With binary control over a plurality of post couplers, a significant accumlative effect in the resulting field distribution is achieved yielding a variable-energy drift-tube linear accelerator.

  4. Simulations of Direct Ion Acceleration with Beating Electrostatic Waves

    E-Print Network [OSTI]

    Choueiri, Edgar

    . Gardineer, IV , Benjamin Jorns , and Edgar Y. Choueiri Electric Propulsion and Plasma Dynamics Laboratory Wave Thruster (BWT) ­ an electrodeless electric propulsion concept based on direct ion acceleration. The ultimate goal is for this acceleration mechanism to form the basis of a new plasma propulsion system called

  5. Summary Report of Working Group 1: Laser-Plasma Acceleration

    E-Print Network [OSTI]

    Geddes, Cameron Guy Robinson

    structure providing a linear mechanism with potential to harness low-energy laser systems [11 orders beyond conventional machines, with quasi-monoenergetic beams at MeV-GeV energies, making them and diagnostics. This includes laser wakefield acceleration [1], where acceleration by a plasma wave excited

  6. Drift tube suspension for high intensity linear accelerators

    DOE Patents [OSTI]

    Liska, D.J.; Schamaun, R.G.; Clark, D.C.; Potter, R.C.; Frank, J.A.

    1980-03-11T23:59:59.000Z

    The disclosure relates to a drift tube suspension for high intensity linear accelerators. The system comprises a series of box-sections girders independently adjustably mounted on a linear accelerator. A plurality of drift tube holding stems are individually adjustably mounted on each girder.

  7. Insights from US ITER: Strategies for Accelerating

    E-Print Network [OSTI]

    Insights from US ITER: Strategies for Accelerating Fusion Energy as a Project Ned Sauthoff US ITER Project Manager SOFE Town Hall Meeting | June 27, 2011 #12;1. Treat fusion energy as a project, rather than a program. Mission: ·Rapid materials and fusion systems development, leading

  8. Proceedings of the 22nd Particle Accelerator Conference (PAC'07)

    SciTech Connect (OSTI)

    N /A

    2007-08-01T23:59:59.000Z

    The twenty-second Particle Accelerator Conference, PAC'07, took place at the Albuquerque Convention Centre in Albuquerque, the largest city in New Mexico, from Monday to Friday, 2007 June 25 to 29. It was attended by over 1350 delegates from 25 different countries (63% North America, 24% Europe, 11% Asia and 2% Other), and was held under the auspices of the two professional societies that oversee and make holding this series of conferences possible, the Division of Physics of Beams within APS, and the Nuclear and Plasma Sciences Society within IEEE. As host of the conference, Los Alamos National Laboratory (LANL) is especially thanked for their many contributions and assistance both prior to and during the conference. The Convention Center was an ideal location for information sharing and discussions between the interdisciplinary aspects of the accelerator community, as well as for related meetings and ad-hoc 'rump' sessions.

  9. TOPICS IN THE PHYSICS OF PARTICLE ACCELERATORS

    E-Print Network [OSTI]

    Sessler, A.M.

    2008-01-01T23:59:59.000Z

    their whole lives to accelerator physics. As high energysome appreciation of accelerator physics. We cannot, nor dolectures on basic accelerator physics; then you will hear

  10. Optics elements for modeling electrostatic lenses and accelerator components II. Acceleration columns

    SciTech Connect (OSTI)

    Gillespie, G.H., Brown, T.A.

    1998-05-01T23:59:59.000Z

    A set of optical models for a variety of electrostatic lenses and accelerator columns has been developed for the computer code TRACE 3-D. TRACE 3-D is an envelope (matrix) code including space charge that is often used to model bunched beams in magnetic transport systems and radiofrequency (RF) accelerators when the effects of beam current may be important. Several new matrix models have been developed that allow the code to be used for modeling beam lines and accelerators with electrostatic components. The new models include a number of options for: (1) einzel lenses, (2) accelerator columns, (3) electrostatic deflectors (prisms), and (4) an electrostatic quadrupole. A prescription for setting up the initial beam appropriate to modeling 2-D (continuous) beams has also been developed. The new models for (2) are described in this paper, selected comparisons with other calculations are presented, and a beamline application is summarized.

  11. Energy Technology Division research summary - 1999.

    SciTech Connect (OSTI)

    NONE

    1999-03-31T23:59:59.000Z

    The Energy Technology Division provides materials and engineering technology support to a wide range of programs important to the US Department of Energy. As shown on the preceding page, the Division is organized into ten sections, five with concentrations in the materials area and five in engineering technology. Materials expertise includes fabrication, mechanical properties, corrosion, friction and lubrication, and irradiation effects. Our major engineering strengths are in heat and mass flow, sensors and instrumentation, nondestructive testing, transportation, and electromechanics and superconductivity applications. The Division Safety Coordinator, Environmental Compliance Officers, Quality Assurance Representative, Financial Administrator, and Communication Coordinator report directly to the Division Director. The Division Director is personally responsible for cultural diversity and is a member of the Laboratory-wide Cultural Diversity Advisory Committee. The Division's capabilities are generally applied to issues associated with energy production, transportation, utilization, or conservation, or with environmental issues linked to energy. As shown in the organization chart on the next page, the Division reports administratively to the Associate Laboratory Director (ALD) for Energy and Environmental Science and Technology (EEST) through the General Manager for Environmental and Industrial Technologies. While most of our programs are under the purview of the EEST ALD, we also have had programs funded under every one of the ALDs. Some of our research in superconductivity is funded through the Physical Research Program ALD. We also continue to work on a number of nuclear-energy-related programs under the ALD for Engineering Research. Detailed descriptions of our programs on a section-by-section basis are provided in the remainder of this book.

  12. The History of Metals and Ceramics Division

    SciTech Connect (OSTI)

    Craig, D.F.

    1999-01-01T23:59:59.000Z

    The division was formed in 1946 at the suggestion of Dr. Eugene P. Wigner to attack the problem of the distortion of graphite in the early reactors due to exposure to reactor neutrons, and the consequent radiation damage. It was called the Metallurgy Division and assembled the metallurgical and solid state physics activities of the time which were not directly related to nuclear weapons production. William A. Johnson, a Westinghouse employee, was named Division Director in 1946. In 1949 he was replaced by John H Frye Jr. when the Division consisted of 45 people. He was director during most of what is called the Reactor Project Years until 1973 and his retirement. During this period the Division evolved into three organizational areas: basic research, applied research in nuclear reactor materials, and reactor programs directly related to a specific reactor(s) being designed or built. The Division (Metals and Ceramics) consisted of 204 staff members in 1973 when James R. Weir, Jr., became Director. This was the period of the oil embargo, the formation of the Energy Research and Development Administration (ERDA) by combining the Atomic Energy Commission (AEC) with the Office of Coal Research, and subsequent formation of the Department of Energy (DOE). The diversification process continued when James O. Stiegler became Director in 1984, partially as a result of the pressure of legislation encouraging the national laboratories to work with U.S. industries on their problems. During that time the Division staff grew from 265 to 330. Douglas F. Craig became Director in 1992.

  13. North Atlantic DivisionNorth Atlantic Division SuperstormSuperstorm SandySandy

    E-Print Network [OSTI]

    US Army Corps of Engineers

    North Atlantic DivisionNorth Atlantic Division SuperstormSuperstorm SandySandy Dredging Industry BriefDredging Industry BriefDredging Industry BriefDredging Industry Brief 3 April 20133 April 2013 #12;NAD Sandy Dredging BriefNAD Sandy Dredging Brief · Purposep · Goals · Sandy Program Overview

  14. SHR Service Team: Academic Divisions -Contact Matrix Primary Contact by Unit/Division

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    SHR Service Team: Academic Divisions - Contact Matrix Primary Contact by Unit/Division Astronomy Consultation Dawn Harker Teresa Roffe Barbara Lorimer Last Revised: 07/07/2010 Mail Stop: SHR-Service Teams Fax: 831-459-2661 1 of 2 #12;SHR Operations Services Team One SHR Partner Services Senior Manager, SHR

  15. Transportation Energy Technology DivisionEnergy Technology Division --TribologyTribology

    E-Print Network [OSTI]

    -frictionless carbon coatings to the components when appropriate · Develop and evaluate polymer composite materials to their prototype using Hitco C/C composite and anodized aluminum material combination. · Fabricated and evaluatedTransportation Materials Energy Technology DivisionEnergy Technology Division -- Tribology

  16. Division of Student Life 20122013 ANNUAL REPORT Division of Student Life

    E-Print Network [OSTI]

    1 Division of Student Life 2012­2013 ANNUAL REPORT Division of Student Life #12;2 The Power to Transform: Expectations of Our Students At UW­Madison, we know that the Wisconsin Experience has learning inside and outside the classroom to make the world a better place?" In the eight departments

  17. Particle Acceleration at Relativistic Shocks

    E-Print Network [OSTI]

    Yves A. Gallant

    2002-01-15T23:59:59.000Z

    I review the current status of Fermi acceleration theory at relativistic shocks. I first discuss the relativistic shock jump conditions, then describe the non-relativistic Fermi mechanism and the differences introduced by relativistic flows. I present numerical calculations of the accelerated particle spectrum, and examine the maximum energy attainable by this process. I briefly consider the minimum energy for Fermi acceleration, and a possible electron pre-acceleration mechanism.

  18. Acceleration of inertial particles in wall bounded flows: DNS and LES with stochastic modelling of the subgrid acceleration

    E-Print Network [OSTI]

    Boyer, Edmond

    environmental systems, from sediment transport to atmospheric dispersion of pollutants or solid depositionAcceleration of inertial particles in wall bounded flows: DNS and LES with stochastic modelling and LES with stochastic modelling of the subgrid acceleration R´emi Zamansky, Ivana Vinkovic, Mikhael

  19. International Technology Exchange Division: 1993 Annual report

    SciTech Connect (OSTI)

    Not Available

    1993-12-31T23:59:59.000Z

    The Office of Technology Development (OTD) was established to ensure that reliable and acceptable technologies are available for implementation at DOE sites and that a technically trained work force is available to complete the EM mission by 2019. OTD established the International Technology Exchange Staff (ITES) to identify, evaluate, and acquire international technologies which can accelerate US DOE cleanup operations. ITES`s goal is to pursue international collaboration among government organizations, educational institutions, and private industry to identify world-wide needs and available technologies that will meet US environmental needs in general, and EM cleanup needs in particular; and establish mechanisms by which US government ER/WM technologies will be transferred to the US private sector for commercialization and export to international markets. ITES has developed the following strategic objectives to implement its international goals: develop and implement EM`s policy for international programs in accordance with DOE and US Government policies and regulations; establish efficient and predictable international technology transfer mechanisms; assist the US private sector in the commercialization and deployment of federally funded EM technologies and related knowledge in international markets; leverage US and non-US resources to accelerate international development and regulatory acceptance of EM technologies; contribute to the improvement of EM`s training of US students, scientists, and managers on international environmental issues. A summary and descriptions of program activities and accomplishments are given for 17 programs which comprise the four main areas of the ITES program: Activities with the Former Soviet Union, International Technology Transfer, International Cooperation, and Information Systems and Publications. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  20. Radiation from Accelerated Branes

    E-Print Network [OSTI]

    Mohab Abou-Zeid; Miguel S. Costa

    2000-01-29T23:59:59.000Z

    The radiation emitted by accelerated fundamental strings and D-branes is studied within the linear approximation to the supergravity limit of string theory. We show that scalar, gauge field and gravitational radiation is generically emitted by such branes. In the case where an external scalar field accelerates the branes, we derive a Larmor-type formula for the emitted scalar radiation and study the angular distribution of the outgoing energy flux. The classical radii of the branes are calculated by means of the corresponding Thompson scattering cross sections. Within the linear approximation, the interaction of the external scalar field with the velocity fields of the branes gives a contribution to the observed gauge field and gravitational radiation.