Sample records for 3c capacity adjusted

  1. Optimal transition from coal to gas and renewable power under capacity constraints and adjustment costs

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Optimal transition from coal to gas and renewable power under capacity constraints and adjustment existing coal power plants to gas and renewable power under a carbon budget. It solves a model of polluting, exhaustible resources with capacity constraints and adjustment costs (to build coal, gas, and renewable power

  2. EIA Energy Efficiency-Table 3c. Capacity Adjusted Value of Production a by

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40CoalLease(Billion2,128 2,469DecadeOrigin State GlossaryEnergy ) for1998,Selected

  3. Power Compensation Effect of an Adjustable-Speed Rotary Condenser with a Flywheel for a Large Capacity Magnet Power Supply

    E-Print Network [OSTI]

    Akagi, H

    1999-01-01T23:59:59.000Z

    Power Compensation Effect of an Adjustable-Speed Rotary Condenser with a Flywheel for a Large Capacity Magnet Power Supply

  4. FeO0.7F1.3/C Nanocomposite as a High-Capacity Cathode Material for Sodium-Ion Batteries

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhou, Yong-Ning [Brookhaven National Laboratory, Department of Chemistry, Uptown, NY (United States); Sina, Masha [Rutgers Univ., Materials and Engineering, Piscataway, NJ (United States); Pereira, Nathalie [Rutgers Univ., Energy Storage Research Group (ESRG), Piscataway, NJ (United States); Yu, Xiquian [Brookhaven National Laboratory, Department of Chemistry, Uptown, NY (United States); Amatucci, Glenn G. [Rutgers Univ., Energy Storage Research Group (ESRG), Piscataway, NJ (United States); Yang, Xiao-Qing [Brookhaven National Laboratory, Department of Chemistry, Uptown, NY (United States); Cosandey, Frederic [Rutgers Univ., Materials and Engineering, Piscataway, NJ (United States); Nam, Kyung-Wan [Dongguk University-Seoul (Korea, Republic of). Dept. of Energy and Materials Engineering

    2015-02-01T23:59:59.000Z

    Searching high capacity cathode materials is one of the most important fields of the research and development of sodium-ion batteries (SIBs). Here, we report a FeO0.7F1.3/C nanocomposite synthesized via a solution process as a new cathode material for SIBs. This material exhibits a high initial discharge capacity of 496 mAh g-1 in a sodium cell at 50 °C. From the 3rd to 50th cycle, the capacity fading is only 0.14% per cycle (from 388 mAh g-1 at 3rd the cycle to 360 mAh g-1 at the 50th cycle), demonstrating superior cyclability. A high energy density of 650 Wh kg-1 is obtained at the material level. The reaction mechanism studies of FeO0.7F1.3/C with sodium show a hybridized mechanism of both intercalation and conversion reaction.

  5. ARM - Instrument - mwr3c

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006Datastreamstwrcam40mgovInstrumentsmwr3c Documentation MWR3C : Handbook ARM Data Discovery Browse Data

  6. ARM - Datastreams - mwr3c

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492air Comments?Datastreamsmfr10m Documentation DataDatastreamsmplDatastreamsmwr3c Documentation Data

  7. Budget Adjustment Single Sided Budget Adjustment

    E-Print Network [OSTI]

    Stephens, Graeme L.

    Budget Adjustment & Single Sided Budget Adjustment WELCOME! #12;Accessing Kuali · Campus://busfin.colostate.edu #12;What will be covered today? · When should I use a Budget Adjustment (BA) or Single Sided Budget · Error correction · Onesided vs. singlesided entries #12;When to use a Budget Adjustment · How do I know

  8. Deep radio observations of 3C 324 and 3C 368: evidence for jetcloud interactions

    E-Print Network [OSTI]

    Best, Philip

    Deep radio observations of 3C 324 and 3C 368: evidence for jet­cloud interactions P. N. Best,1 C. L form 1997 August 27 A B S T R AC T High-resolution, deep radio images are presented for two distant radio galaxies, 3C 324 (z ¼ 1:206) and 3C 368 (z ¼ 1:132), which are both prime examples of the radio

  9. Governance of Adjustments

    E-Print Network [OSTI]

    Wernerfelt, Birger

    2003-03-14T23:59:59.000Z

    The article proposes a research program to compare game forms in terms of their ability to govern ex post adjustments to ex ante contracts. The comparisons can be ...

  10. Purchased Gas Adjustment Rules (Tennessee)

    Broader source: Energy.gov [DOE]

    The Purchased Gas Adjustment Rules are implemented by the Tennessee Regulatory Authority (Authority). Purchased Gas Adjustment (PGA) Rules are intended to permit the company/LDC (local gas...

  11. Automatic temperature adjustment apparatus

    DOE Patents [OSTI]

    Chaplin, James E. (66 Overlook Rd., Bloomingdale, NJ 07403)

    1985-01-01T23:59:59.000Z

    An apparatus for increasing the efficiency of a conventional central space heating system is disclosed. The temperature of a fluid heating medium is adjusted based on a measurement of the external temperature, and a system parameter. The system parameter is periodically modified based on a closed loop process that monitors the operation of the heating system. This closed loop process provides a heating medium temperature value that is very near the optimum for energy efficiency.

  12. Precision adjustable stage

    DOE Patents [OSTI]

    Cutburth, Ronald W. (Tracy, CA); Silva, Leonard L. (Livermore, CA)

    1988-01-01T23:59:59.000Z

    An improved mounting stage of the type used for the detection of laser beams is disclosed. A stage center block is mounted on each of two opposite sides by a pair of spaced ball bearing tracks which provide stability as well as simplicity. The use of the spaced ball bearing pairs in conjunction with an adjustment screw which also provides support eliminates extraneous stabilization components and permits maximization of the area of the center block laser transmission hole.

  13. 86 GHz Very Long Baseline Polarimetry of 3C273 and 3C279 with the Coordinated Millimeter VLBI Array

    E-Print Network [OSTI]

    Joanne M. Attridge

    2001-04-18T23:59:59.000Z

    86 GHz Very Long Baseline Polarimetry probes magnetic field structures within the cores of Active Galactic Nuclei at higher angular resolutions and a spectral octave higher than previously achievable. Observations of 3C273 and 3C279 taken in April 2000 with the Coordinated Millimeter VLBI Array have resulted in the first total intensity (Stokes I) and linear polarization VLBI images reported of any source at 86 GHz. These results reveal the 86 GHz electric vector position angles within the jets of 3C273 and 3C279 to be orthogonal to each other, and the core of 3C273 to be unpolarized. If this lack of polarization is due to Faraday depolarization alone, the dispersion in rotation measure is >=90000 rad/m^2 for the core of 3C273.

  14. Data:1af230d5-5e65-4802-be70-3d3c816a1548 | Open Energy Information

    Open Energy Info (EERE)

    - rate applies to schedules 1A, 1B, 2A, 2B, 3B, 3C, 10A & 10B as co-generation purchase rates - adjustments are averages of June, July and August on-peak and off-peak rates and all...

  15. The Rahman polynomials and the Lie algebra sl_3(C)

    E-Print Network [OSTI]

    Iliev, Plamen

    2010-01-01T23:59:59.000Z

    We interpret the Rahman polynomials in terms of the Lie algebra $sl_3(C)$. Using the parameters of the polynomials we define two Cartan subalgebras for $sl_3(C)$, denoted $H$ and $\\tilde{H}$. We display an antiautomorphism $\\dagger$ of $sl_3(C)$ that fixes each element of $H$ and each element of $\\tilde{H}$. We consider a certain finite-dimensional irreducible $sl_3(C)$-module $V$ consisting of homogeneous polynomials in three variables. We display a nondegenerate symmetric bilinear form $$ on $V$ such that $ = $ for all $\\beta \\in sl_3(C)$ and $\\xi,\\zeta \\in V$. We display two bases for $V$; one diagonalizes $H$ and the other diagonalizes $\\tilde{H}$. Both bases are orthogonal with respect to $$. We show that when $$ is applied to a vector in each basis, the result is a trivial factor times a Rahman polynomial evaluated at an appropriate argument. Thus for both transition matrices between the bases each entry is described by a Rahman polynomial. From these results we recover the previously known orthogonalit...

  16. Microwave Radiometer – 3 Channel (MWR3C) Handbook

    SciTech Connect (OSTI)

    Cadeddu, MP

    2012-05-04T23:59:59.000Z

    The microwave radiometer 3-channel (MWR3C) provides time-series measurements of brightness temperatures from three channels centered at 23.834, 30, and 89 GHz. These three channels are sensitive to the presence of liquid water and precipitable water vapor.

  17. Adjusted Estimates of Texas Natural Gas Production

    U.S. Energy Information Administration (EIA) Indexed Site

    1 Energy Information Administration Adjusted Estimates of Texas Natural Gas Production Background The Energy Information Administration (EIA) is adjusting its estimates of natural...

  18. The dynamics and environmental impact of 3C452

    E-Print Network [OSTI]

    Shelton, D L; Croston, J H

    2011-01-01T23:59:59.000Z

    We present a detailed analysis of a new XMM-Newton observation of the FRII radio galaxy 3C452 and its environment. We detect X-ray emission from the hot intragroup medium and measure its temperature as well as obtaining the surface brightness and pressure profiles. We provide evidence that 3C452 is currently heating its environment, measuring a temperature of $1.18\\pm0.11$ keV for the immediate environment of the radio source compared to $0.86^{+0.13}_{-0.05}$ keV for the outer environment. We also present evidence that the outer regions of the lobes are overpressured (internal pressure of $2.6\\times10^{-13}$ Pa and external pressure of $1.11\\pm{0.11}\\times10^{-13}$ Pa at the edge of the lobes) and therefore are driving a shock at the lobe edges (with a temperature which we constrain to be $1.7^{+0.9}_{-0.5}$ keV), while the inner regions of the lobes are underpressured and contracting. Taking into account the very large amount of energy stored in the lobes, we show that this relatively low-powered FRII radio...

  19. Capacity Markets for Electricity

    E-Print Network [OSTI]

    Creti, Anna; Fabra, Natalia

    2004-01-01T23:59:59.000Z

    Designing Markets for Electricity. Wiley IEEE Press. [25]in the England and Wales Electricity Market”, Power WorkingFelder (1996), “Should Electricity Markets Have a Capacity

  20. ORISE: Capacity Building

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capacity Building Because public health agencies must maintain the resources to respond to public health challenges, critical situations and emergencies, the Oak Ridge Institute...

  1. Liquid heat capacity lasers

    DOE Patents [OSTI]

    Comaskey, Brian J. (Walnut Creek, CA); Scheibner, Karl F. (Tracy, CA); Ault, Earl R. (Livermore, CA)

    2007-05-01T23:59:59.000Z

    The heat capacity laser concept is extended to systems in which the heat capacity lasing media is a liquid. The laser active liquid is circulated from a reservoir (where the bulk of the media and hence waste heat resides) through a channel so configured for both optical pumping of the media for gain and for light amplification from the resulting gain.

  2. Knudsen heat capacity

    SciTech Connect (OSTI)

    Babac, Gulru, E-mail: babac@itu.edu.tr [Institute of Energy, Istanbul Technical University, Istanbul 34469 (Turkey)] [Institute of Energy, Istanbul Technical University, Istanbul 34469 (Turkey); Reese, Jason M. [School of Engineering, University of Edinburgh, Edinburgh EH9 3JL (United Kingdom)] [School of Engineering, University of Edinburgh, Edinburgh EH9 3JL (United Kingdom)

    2014-05-15T23:59:59.000Z

    We present a “Knudsen heat capacity” as a more appropriate and useful fluid property in micro/nanoscale gas systems than the constant pressure heat capacity. At these scales, different fluid processes come to the fore that are not normally observed at the macroscale. For thermodynamic analyses that include these Knudsen processes, using the Knudsen heat capacity can be more effective and physical. We calculate this heat capacity theoretically for non-ideal monatomic and diatomic gases, in particular, helium, nitrogen, and hydrogen. The quantum modification for para and ortho hydrogen is also considered. We numerically model the Knudsen heat capacity using molecular dynamics simulations for the considered gases, and compare these results with the theoretical ones.

  3. Atomic Computer Simulations of Defect Migration in 3C and 4H...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computer Simulations of Defect Migration in 3C and 4H-SiC. Atomic Computer Simulations of Defect Migration in 3C and 4H-SiC. Abstract: Knowledge of the migration of intrinsic point...

  4. Refinery Capacity Report

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    by State as of January 1, 2006 PDF 5 Refiners' Operable Atmospheric Crude Oil Distillation Capacity as of January 1, 2006 PDF 6 Operable Crude Oil and Downstream Charge...

  5. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    Capacity Report June 2014 With Data as of January 1, 2014 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 This report was prepared by...

  6. Forward capacity market CONEfusion

    SciTech Connect (OSTI)

    Wilson, James F.

    2010-11-15T23:59:59.000Z

    In ISO New England and PJM it was assumed that sponsors of new capacity projects would offer them into the newly established forward centralized capacity markets at prices based on their levelized net cost of new entry, or ''Net CONE.'' But the FCCMs have not operated in the way their proponents had expected. To clear up the CONEfusion, FCCM designs should be reconsidered to adapt them to the changing circumstances and to be grounded in realistic expectations of market conduct. (author)

  7. Faraday Rotation Measures in the parsec scale jets of the radio galaxies M87, 3C 111, and 3C 120

    E-Print Network [OSTI]

    Taylor, Greg

    Faraday Rotation Measures in the parsec scale jets of the radio galaxies M87, 3C 111, and 3C 120 R. T. Zavala 1;2 & G. B. Taylor 1 rzavala@nrao.edu, gtaylor@nrao.edu Received ; accepted 1 National. Introduction Several recent papers (Udomprasert et al. 1997, Cotton 1997 and Taylor 1998 & 2000) have

  8. Dual capacity reciprocating compressor

    DOE Patents [OSTI]

    Wolfe, R.W.

    1984-10-30T23:59:59.000Z

    A multi-cylinder compressor particularly useful in connection with northern climate heat pumps and in which different capacities are available in accordance with reversing motor rotation is provided with an eccentric cam on a crank pin under a fraction of the connecting rods, and arranged for rotation upon the crank pin between opposite positions 180[degree] apart so that with cam rotation on the crank pin such that the crank throw is at its normal maximum value all pistons pump at full capacity, and with rotation of the crank shaft in the opposite direction the cam moves to a circumferential position on the crank pin such that the overall crank throw is zero. Pistons whose connecting rods ride on a crank pin without a cam pump their normal rate with either crank rotational direction. Thus a small clearance volume is provided for any piston that moves when in either capacity mode of operation. 6 figs.

  9. Dual capacity reciprocating compressor

    DOE Patents [OSTI]

    Wolfe, Robert W. (Wilkinsburg, PA)

    1984-01-01T23:59:59.000Z

    A multi-cylinder compressor 10 particularly useful in connection with northern climate heat pumps and in which different capacities are available in accordance with reversing motor 16 rotation is provided with an eccentric cam 38 on a crank pin 34 under a fraction of the connecting rods, and arranged for rotation upon the crank pin between opposite positions 180.degree. apart so that with cam rotation on the crank pin such that the crank throw is at its normal maximum value all pistons pump at full capacity, and with rotation of the crank shaft in the opposite direction the cam moves to a circumferential position on the crank pin such that the overall crank throw is zero. Pistons 24 whose connecting rods 30 ride on a crank pin 36 without a cam pump their normal rate with either crank rotational direction. Thus a small clearance volume is provided for any piston that moves when in either capacity mode of operation.

  10. Quantum Channel Capacities

    E-Print Network [OSTI]

    Graeme Smith

    2010-07-16T23:59:59.000Z

    A quantum communication channel can be put to many uses: it can transmit classical information, private classical information, or quantum information. It can be used alone, with shared entanglement, or together with other channels. For each of these settings there is a capacity that quantifies a channel's potential for communication. In this short review, I summarize what is known about the various capacities of a quantum channel, including a discussion of the relevant additivity questions. I also give some indication of potentially interesting directions for future research.

  11. Robust Risk Adjustment in Health Insurance

    E-Print Network [OSTI]

    2014-08-07T23:59:59.000Z

    Aug 7, 2014 ... Moody's estimates the preliminary median operating margins for ..... [1] Staff, ORYX risk adjustment guide, Tech. rep., Joint Commission (2014).

  12. Efficient Adjustable Reflectivity Smart Window

    SciTech Connect (OSTI)

    D. Morgan Tench

    2005-12-01T23:59:59.000Z

    This project addressed the key technical issues for development of an efficient smart window based on reversible electrochemical transfer of silver between a mirror electrode and a localized counter electrode. Effort to provide uniform switching over large areas focused on use of a resistive transparent electrode innerlayer to increase the interelectrode resistance. An effective edge seal was developed in collaboration with adhesive suppliers and an electrochromic device manufacturer. Work to provide a manufacturable counter electrode focused on fabricating a dot matrix electrode without photolithography by electrodeposition of Pt nuclei on inherent active sites on a transparent oxide conductor. An alternative counter electrode based on a conducting polymer and an ionic liquid electrolyte was also investigated. Work in all of these areas was successful. Sputtered large-bandgap oxide innerlayers sandwiched between conductive indium tin oxide (ITO) layers were shown to provide sufficient cross-layer resistance (>300 ohm/cm{sup 2}) without significantly affecting the electrochemical properties of the ITO overlayer. Two edge seal epoxies, one procured from an epoxy manufacturer and one provided by an electrochromic device manufacturer in finished seals, were shown to be effective barriers against oxygen intrusion up to 80 C. The optimum density of nuclei for the dot matrix counter electrode was attained without use of photolithography by electrodeposition from a commercial alkaline platinum plating bath. Silver loss issues for cells with dot matrix electrodes were successfully addressed by purifying the electrolyte and adjusting the cell cycling parameters. More than 30K cycles were demonstrated for a REM cell (30-cm square) with a dot matrix counter electrode. Larger cells (30-cm square) were successfully fabricated but could not be cycled since the nucleation layers (provided by an outside supplier) were defective so that mirror deposits could not be produced.

  13. Magnetic properties of Fe3C nanograins embedded in carbon matrix Y. H. Lee,a)

    E-Print Network [OSTI]

    Huang, Jung-Chun

    Magnetic properties of Fe3C nanograins embedded in carbon matrix Y. H. Lee,a) T. C. Han, and J. C. A. Huang Physics Department, National Cheng-Kung University, Tainan 70101, Taiwan, Republic of China rods was used in manufacturing carbon films with Fe3C nanograin inclusions. Both temperature- and field

  14. 3C-SiC Films on Si for MEMS Applications: Mechanical Properties , G. Kravchenko2

    E-Print Network [OSTI]

    Volinsky, Alex A.

    diamond tip. These results indicate that polycrystalline SiC thin films are attractive for MEMS. In addition, poly-crystalline 3C- SiC was also grown on (100)Si so that a comparison with monocrystaline 3C-SiC, also grown on (100)Si, could be made. The mechanical properties of single crystal and polycrystalline 3

  15. The interaction between radio lobes and hot gas in the nearby radio galaxies 3C285 and 3C442A

    E-Print Network [OSTI]

    M. J. Hardcastle; R. P. Kraft; D. M. Worrall; J. H. Croston; D. A. Evans; M. Birkinshaw; S. S. Murray

    2007-03-05T23:59:59.000Z

    We present Chandra observations of two nearby radio galaxies in group environments, 3C285 and 3C442A. The host galaxies of both sources are involved in mergers with nearby massive galaxies, and the hot gas in the systems is extended along lines joining the interacting galaxies. Both sources show strong evidence for interactions between the radio lobes and the asymmetrical hot gas. We argue that the structure in the hot gas is independent of the existence of the radio lobes in these systems, and argue that hot gas shaped by an ongoing massive galaxy merger may play an important role in the dynamics of radio lobes in other objects. For 3C442A, our observations show that gas is being driven out of both members of the host interacting galaxy pair, and the implied constraints on galaxy velocities are consistent with mildly supersonic motions with respect to the group-scale hot gas. The previously known filamentary radio structure in the center of 3C442A may be a result of the interaction between hot gas expelled from these galaxies and pre-existing radio-emitting plasma. In 3C285, where there is no ongoing galaxy merger, the powerful radio source is probably having a significant effect on the energetics of the host group.

  16. EIA Energy Efficiency-Table 4c. Capacity Adjusted Value of Production a by

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40CoalLease(Billion2,128 2,469DecadeOrigin State GlossaryEnergy )and

  17. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for Table 1.1;"21Capacity Report

  18. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for Table 1.1;"21Capacity Report5

  19. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for Table 1.1;"21Capacity

  20. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for Table 1.1;"21Capacity Operable

  1. Refinery Capacity Report

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for Table 1.1;"21Capacity

  2. Refinery Capacity Report

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade1 Source:Additions to Capacity onThousand(Dollars2009Rail

  3. Refinery Capacity Report Historical

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade1 Source:Additions to Capacity onThousand(Dollars2009Rail

  4. ORISE: Capacity Building

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparencyDOE Project *1980-1981 U.S.CapabilitiesCapacity Building

  5. Data:8a4d5375-a571-4be7-ac3c-3c65e9b423cb | Open Energy Information

    Open Energy Info (EERE)

    service rate with demand Sector: Commercial Description: Purchased Power Adjustment cost + amount over 0.060 per kWh Source or reference: www.ci.north-saint-paul.mn.us...

  6. Magnetic bearing element with adjustable stiffness

    DOE Patents [OSTI]

    Post, Richard F

    2013-11-12T23:59:59.000Z

    A compact magnetic bearing element is provided which is made of permanent magnet discs configured to be capable of the adjustment of the bearing stiffness and levitation force over a wide range.

  7. Risk-adjusted monitoring of survival times

    SciTech Connect (OSTI)

    Sego, Landon H.; Reynolds, Marion R.; Woodall, William H.

    2009-02-26T23:59:59.000Z

    We consider the monitoring of clinical outcomes, where each patient has a di®erent risk of death prior to undergoing a health care procedure.We propose a risk-adjusted survival time CUSUM chart (RAST CUSUM) for monitoring clinical outcomes where the primary endpoint is a continuous, time-to-event variable that may be right censored. Risk adjustment is accomplished using accelerated failure time regression models. We compare the average run length performance of the RAST CUSUM chart to the risk-adjusted Bernoulli CUSUM chart, using data from cardiac surgeries to motivate the details of the comparison. The comparisons show that the RAST CUSUM chart is more efficient at detecting a sudden decrease in the odds of death than the risk-adjusted Bernoulli CUSUM chart, especially when the fraction of censored observations is not too high. We also discuss the implementation of a prospective monitoring scheme using the RAST CUSUM chart.

  8. A 3D-3C Reflection Seismic Survey and Data Integration to Identify...

    Open Energy Info (EERE)

    A 3D-3C Reflection Seismic Survey and Data Integration to Identify the Seismic Response of Fractures and Permeable Zones Over a Known Geothermal Resource at Soda Lake, Churchill...

  9. Response of Nanocrystalline 3C Silicon Carbide to Heavy-Ion Irradiatio...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Citation: Jiang W, H Wang, I Kim, IT Bae, G Li, P Nachimuthu, Z Zhu, Y Zhang, and WJ Weber.2009."Response of Nanocrystalline 3C Silicon Carbide to Heavy-Ion...

  10. Amorphization of nanocrystalline 3C-SiC irradiated with Si+ ions...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    interface and interior amorphization. Citation: Jiang W, H Wang, I Kim, Y Zhang, and WJ Weber.2010."Amorphization of nanocrystalline 3C-SiC irradiated with Si+ ions."Journal of...

  11. A 3D-3C Reflection Seismic Survey and Data Integration to Identify...

    Office of Environmental Management (EM)

    to Identify the Seismic Response of Fractures and Permeable Zones Over a Known Geothermal Resource at Soda Lake, Churchhill Co., NV A 3D-3C Reflection Seismic Survey and Data...

  12. Precision X-ray spectroscopy of 3C 273 jet knots

    E-Print Network [OSTI]

    Avara, Mark J

    2008-01-01T23:59:59.000Z

    We present results from precision X-ray spectroscopy using high-resolution ([delta lambda] = 0.01A) spectra of 3C 273 jet knots extracted from eight observations made using Chandra in conjunction with the HETGS. Using these ...

  13. An asymmetrical synchrotron model for knots in the 3C 273 jet

    E-Print Network [OSTI]

    Liu, Wen-Po

    2015-01-01T23:59:59.000Z

    To interpret the emissions of knots in the 3C 273 jet from radio to X-rays, we propose a synchrotron model: considering the shock compression effect, the injection spectra from a shock to upstream and downstream emission regions are asymmetric. Our model could well explain the spectral energy distributions (SED) of knots in the 3C 273 jet, and the predictions on the spectra of knots could be tested by future observations.

  14. Cubic GaN on Nanopatterned 3C-SiC/Si (001) Substrates

    E-Print Network [OSTI]

    As, Donat Josef

    Chapter 15 Cubic GaN on Nanopatterned 3C-SiC/Si (001) Substrates Ricarda Maria Kemper, Donat Josef relaxed cubic GaN by plasma-assisted molecular beam epitaxy on prepat- terned 3C-SiC/Si (001) substrates) process. We analyze the influence of the substrate on the GaN growth and show that it is possible to grow

  15. MEASUREMENT OF SPECIFIC HEAT CAPACITY OF SALTSTONE

    SciTech Connect (OSTI)

    Harbour, J; Vickie Williams, V

    2008-09-29T23:59:59.000Z

    One of the goals of the Saltstone variability study is to identify (and quantify the impact of) the operational and compositional variables that control or influence the important processing and performance properties of Saltstone grout mixtures. The heat capacity of the Saltstone waste form is one of the important properties of Saltstone mixes that was last measured at SRNL in 1997. It is therefore important to develop a core competency for rapid and accurate analysis of the specific heat capacity of the Saltstone mixes in order to quantify the impact of compositional and operational variations on this property as part of the variability study. The heat capacity, coupled with the heat of hydration data obtained from isothermal calorimetry for a given Saltstone mix, can be used to predict the maximum temperature increase in the cells within the vaults of the Saltstone Disposal Facility (SDF). The temperature increase controls the processing rate and the pour schedule. The maximum temperature is also important to the performance properties of the Saltstone. For example, in mass pours of concrete or grout of which Saltstone is an example, the maximum temperature increase and the maximum temperature difference (between the surface and the hottest location) are controlled to ensure durability of the product and prevent or limit the cracking caused by the thermal gradients produced during curing. This report details the development and implementation of a method for the measurement of the heat capacities of Saltstone mixes as well as the heat capacities of the cementitious materials of the premix and the simulated salt solutions used to batch the mixes. The developed method utilizes the TAM Air isothermal calorimeter and takes advantage of the sophisticated heat flow measurement capabilities of the instrument. Standards and reference materials were identified and used to validate the procedure and ensure accuracy of testing. Heat capacities of Saltstone mixes were {approx} 55% higher than the previous measurement of specific heat capacity on a reference Saltstone mix in 1997. Values of mixes prepared using Deliquification, Dissolution and Adjustment (DDA), Modular Caustic Side Solvent Extraction Unit (MCU) and Salt Waste Processing Facility (SWPF) simulants and premix at 0.60 w/cm ratio were {approx} 1.95 J/g/{sup o}C and were equivalent within experimental error. The simple law of mixtures was used to predict the heat capacities of the Saltstone and the results were in excellent agreement with experimental data. This simple law of mixtures can therefore be used to predict the heat capacities of Saltstone mixes in those cases where measurements have not been made. The time dependence of the heat capacity is important as an input to the modeling of temperature increase in Saltstone vaults. The heat capacity of a mix of MCU and premix at 0.60 w/cm ratio was measured immediately after initial mixing and then periodically up to times greater than 100 days. Within experimental error, the heat capacity did not change with time. Therefore, the modeling is not complicated by requiring a time dependent function for specific heat capacity. The water to cementitious material (w/cm) ratio plays a key role in determining the value of the heat capacity. Both experimental and predictive values for SWPF mixes as function of the w/cm ratio were obtained and presented in this report. Predictions of the maximum temperatures of the Saltstone mixes were made using the heat of hydration data from previous isothermal measurements and the newly measured heat capacities for DDA, MCU and SWPF mixes. The maximum temperature increase ranged from 37 to 48 C for these mixes. The presence of aluminate at 0.33 M produced a temperature increase of 68 C which is close to the adiabatic temperature rise of 74 C observed by Steimke and Fowler in 1997 for a mix containing 0.35 M aluminate. Aluminum dissolution of the sludge will increase the aluminate in the DSS which in turn will result in a larger temperature increase in the Saltstone vaults during the curing p

  16. Cost of Gas Adjustment for Gas Utilities (Maine)

    Broader source: Energy.gov [DOE]

    This rule, applicable to gas utilities, establishes rules for calculation of gas cost adjustments, procedures to be followed in establishing gas cost adjustments and refunds, and describes reports...

  17. FIRST-PRINCIPLES CALCULATIONS OF CHARGE STATES AND FORMATION ENERGIES OF Mg TRANSMUTANT IN 3C-SIC

    SciTech Connect (OSTI)

    Hu, Shenyang Y.; Setyawan, Wahyu; Jiang, Weilin; Henager, Charles H.; Kurtz, Richard J.

    2014-03-31T23:59:59.000Z

    To investigate the thermodynamic and kinetic properties of various transmutants in 3C-SiC using density functional theory.

  18. A California generation capacity market

    SciTech Connect (OSTI)

    Conkling, R.L.

    1998-10-01T23:59:59.000Z

    California, overconfident with its new Power Exchange spot market, seems unaware that it could be afflicted by the same turmoil that bludgeoned the Midwest in June. An electricity capacity market should be put in place before crisis strikes. This article outlines a framework for adding an electricity capacity market in California. The new market would not create a new bureaucracy but would function within the state`s now operational PX and independent system operator (ISO) mechanisms. It would be an open market, in which capacity would be traded transparently, with freedom of entree for all willing sellers and all willing buyers.

  19. Load controller and method to enhance effective capacity of a photovoltaic power supply using a dynamically determined expected peak loading

    DOE Patents [OSTI]

    Perez, Richard

    2005-05-03T23:59:59.000Z

    A load controller and method are provided for maximizing effective capacity of a non-controllable, renewable power supply coupled to a variable electrical load also coupled to a conventional power grid. Effective capacity is enhanced by monitoring power output of the renewable supply and loading, and comparing the loading against the power output and a load adjustment threshold determined from an expected peak loading. A value for a load adjustment parameter is calculated by subtracting the renewable supply output and the load adjustment parameter from the current load. This value is then employed to control the variable load in an amount proportional to the value of the load control parameter when the parameter is within a predefined range. By so controlling the load, the effective capacity of the non-controllable, renewable power supply is increased without any attempt at operational feedback control of the renewable supply.

  20. Article mounting and position adjustment stage

    DOE Patents [OSTI]

    Cutburth, Ronald W. (Tracy, CA); Silva, Leonard L. (Livermore, CA)

    1988-01-01T23:59:59.000Z

    An improved adjustment and mounting stage of the type used for the detection of laser beams is disclosed. A ring sensor holder has locating pins on a first side thereof which are positioned within a linear keyway in a surrounding housing for permitting reciprocal movement of the ring along the keyway. A rotatable ring gear is positioned within the housing on the other side of the ring from the linear keyway and includes an oval keyway which drives the ring along the linear keyway upon rotation of the gear. Motor-driven single-stage and dual (x, y) stage adjustment systems are disclosed which are of compact construction and include a large laser transmission hole.

  1. Article mounting and position adjustment stage

    DOE Patents [OSTI]

    Cutburth, R.W.; Silva, L.L.

    1988-05-10T23:59:59.000Z

    An improved adjustment and mounting stage of the type used for the detection of laser beams is disclosed. A ring sensor holder has locating pins on a first side thereof which are positioned within a linear keyway in a surrounding housing for permitting reciprocal movement of the ring along the keyway. A rotatable ring gear is positioned within the housing on the other side of the ring from the linear keyway and includes an oval keyway which drives the ring along the linear keyway upon rotation of the gear. Motor-driven single-stage and dual (x, y) stage adjustment systems are disclosed which are of compact construction and include a large laser transmission hole. 6 figs.

  2. From Centimeter to Millimeter Wavelengths: A High Angular Resolution Study of 3C273

    E-Print Network [OSTI]

    T. P. Krichbaum; A. Witzel; J. A. Zensus

    2001-03-27T23:59:59.000Z

    We monitored 3C273 with VLBI at 15-86 GHz since 1990. We discuss component trajectories, opacity effects at the jet base, a rotating and perhaps precessing jet, and outburst-ejection relations from Gamma-ray to radio bands.

  3. Radio-Optical Study of Double-Peaked AGNs. I. 3C 390.3

    E-Print Network [OSTI]

    J. Leon-Tavares; A. P. Lobanov; V. H. Chavushyan; T. G. Arshakian

    2007-12-11T23:59:59.000Z

    We aim to test the model proposed to explain the correlation between the flux density at 15 GHz of a stationary component in the parsec-scale jet and the optical continuum emission in the radio galaxy 3C~390.3. In the model, the double-peaked emission from 3C~390.3 is likely to be generated both near the disk and in a rotating subrelativistic outflow surrounding the jet, due to ionization of the outflow by the beamed continuum emission from the jet. This scenario is chosen since broad-emission lines are observed to vary following changes in the inner radio jet. For recent epochs we have imaged and modelled the radio emission of the inner jet of 3C~390.3, which was observed with very long baseline interferometry at 15 GHz, 22 GHz and 43 GHz, to image the inner part of the parsec-scale jet, locate the exact region where the bulk of the continuum luminosity is generated and search for the mechanism that drives the double-peaked profile emission. We present the preliminary results of testing the model using data from 11 years of active monitoring of 3C~390.3.

  4. Mechanical Properties of 3C-SiC Films for MEMS Applications Jayadeep Deva Reddy1

    E-Print Network [OSTI]

    Volinsky, Alex A.

    . A detailed study of the mechanical properties of single crystal and polycrystalline 3C-SiC films grown on Si substrates was performed by means of nanoindentation using a Berkovich diamond tip. The thickness of both the single and polycrystalline SiC films was around 1-2 µm. Under indentation loads below 500 µN both films

  5. Remote control for anode-cathode adjustment

    DOE Patents [OSTI]

    Roose, Lars D. (Albuquerque, NM)

    1991-01-01T23:59:59.000Z

    An apparatus for remotely adjusting the anode-cathode gap in a pulse power machine has an electric motor located within a hollow cathode inside the vacuum chamber of the pulse power machine. Input information for controlling the motor for adjusting the anode-cathode gap is fed into the apparatus using optical waveguides. The motor, controlled by the input information, drives a worm gear that moves a cathode tip. When the motor drives in one rotational direction, the cathode is moved toward the anode and the size of the anode-cathode gap is diminished. When the motor drives in the other direction, the cathode is moved away from the anode and the size of the anode-cathode gap is increased. The motor is powered by batteries housed in the hollow cathode. The batteries may be rechargeable, and they may be recharged by a photovoltaic cell in combination with an optical waveguide that receives recharging energy from outside the hollow cathode. Alternatively, the anode-cathode gap can be remotely adjusted by a manually-turned handle connected to mechanical linkage which is connected to a jack assembly. The jack assembly converts rotational motion of the handle and mechanical linkage to linear motion of the cathode moving toward or away from the anode.

  6. Wage adjustment, competitiveness and unemployment East Germany after unification

    E-Print Network [OSTI]

    Pfeifer, Holger

    Wage adjustment, competitiveness and unemployment ­ East Germany after unification Werner Smolny years after unification large differences of the labor market situation in East and West Germany persist adjustment in East Germany and the resulting development of competitiveness and unemployment differentials

  7. Adjustable expandable cryogenic piston and ring

    DOE Patents [OSTI]

    Mazur, Peter O. (Aurora, IL); Pallaver, Carl B. (Woodridge, IL)

    1980-01-01T23:59:59.000Z

    The operation of a reciprocating expansion engine for cryogenic refrigeration is improved by changing the pistons and rings so that the piston can be operated from outside the engine to vary the groove in which the piston ring is located. This causes the ring, which is of a flexible material, to be squeezed so that its contact with the wall is subject to external control. This control may be made manually or it may be made automatically in response to instruments that sense the amount of blow-by of the cryogenic fluid and adjust for an optimum blow-by.

  8. Elliptically polarizing adjustable phase insertion device

    DOE Patents [OSTI]

    Carr, Roger (Redwood City, CA)

    1995-01-01T23:59:59.000Z

    An insertion device for extracting polarized electromagnetic energy from a beam of particles is disclosed. The insertion device includes four linear arrays of magnets which are aligned with the particle beam. The magnetic field strength to which the particles are subjected is adjusted by altering the relative alignment of the arrays in a direction parallel to that of the particle beam. Both the energy and polarization of the extracted energy may be varied by moving the relevant arrays parallel to the beam direction. The present invention requires a substantially simpler and more economical superstructure than insertion devices in which the magnetic field strength is altered by changing the gap between arrays of magnets.

  9. Visible Photoluminescence from Cubic (3C) Silicon Carbide Microdisks Coupled to High Quality Whispering Gallery Modes

    E-Print Network [OSTI]

    Marina Radulaski; Thomas M. Babinec; Kai Müller; Konstantinos G. Lagoudakis; Jingyuan Linda Zhang; Sonia Buckley; Yousif A. Kelaita; Kassem Alassaad; Gabriel Ferro; Jelena Vu?kovi?

    2014-12-08T23:59:59.000Z

    We present the design, fabrication and characterization of cubic (3C) silicon carbide microdisk resonators with high quality factor modes at visible and near infrared wavelengths (600 - 950 nm). Whispering gallery modes with quality factors as high as 2,300 and corresponding mode volumes V ~ 2 ({\\lambda}/n)^3 are measured using laser scanning confocal microscopy at room temperature. We obtain excellent correspondence between transverse-magnetic (TM) and transverse-electric (TE) polarized resonances simulated using Finite Difference Time Domain (FDTD) method and those observed in experiment. These structures based on ensembles of optically active impurities in 3C-SiC resonators could play an important role in diverse applications of nonlinear and quantum photonics, including low power optical switching and quantum memories.

  10. adjusted clinical groups: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    status, psychiatric symptomatology, various family variables, psychosocial adjustment and knowledge of illness, medication, stress management and problem-solving skills......

  11. adjusted clinical group: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    status, psychiatric symptomatology, various family variables, psychosocial adjustment and knowledge of illness, medication, stress management and problem-solving skills......

  12. Photonic Crystal Cavities in Cubic (3C) Polytype Silicon Carbide Films

    E-Print Network [OSTI]

    Marina Radulaski; Thomas M. Babinec; Sonia Buckley; Armand Rundquist; J Provine; Kassem Alassaad; Gabriel Ferro; Jelena Vu?kovi?

    2013-11-30T23:59:59.000Z

    We present the design, fabrication, and characterization of high quality factor and small mode volume planar photonic crystal cavities from cubic (3C) thin films (thickness ~ 200 nm) of silicon carbide (SiC) grown epitaxially on a silicon substrate. We demonstrate cavity resonances across the telecommunications band, with wavelengths from 1,250 - 1,600 nm. Finally, we discuss possible applications in nonlinear optics, optical interconnects, and quantum information science.

  13. Magnetic Field Geometry of the Broad Line Radio Galaxy 3C111

    E-Print Network [OSTI]

    P. Kharb; D. Gabuzda; W. Alef; E. Preuss; P. Shastri

    2003-01-06T23:59:59.000Z

    Very Long Baseline Polarimetric observations of the Broad Line Radio galaxy 3C111 performed in July and September of 1996 at 8 and 43 GHz reveal rapidly evolving parsec-scale radio structure after a large millimetre outburst. The B-field geometry is not simple. We present a first analysis of possible Faraday and optical depth effects based on a comparison of the polarization images for the two frequencies.

  14. Broad-line region structure and kinematics in the radio galaxy 3C 120

    E-Print Network [OSTI]

    Kollatschny, W; Zetzl, M; Kaspi, S; Haas, M

    2014-01-01T23:59:59.000Z

    Broad emission lines originate in the surroundings of supermassive black holes in the centers of active galactic nuclei (AGN). One method to investigate the extent, structure, and kinematics of the BLR is to study the continuum and line profile variability in AGN. We selected the radio-loud Seyfert 1 galaxy 3C 120 as a target for this study. We took spectra with a high signal-to-noise ratio of 3C 120 with the 9.2m Hobby-Eberly Telescope between Sept. 2008 and March 2009. In parallel, we photometrically monitored the continuum flux at the Wise observatory. We analyzed the continuum and line profile variations in detail (1D and 2D reverberation mapping) and modeled the geometry of the line-emitting regions based on the line profiles. We show that the BLR in 3C 120 is stratified with respect to the distance of the line-emitting regions from the center with respect to the line widths (FWHM) of the rms profiles and with respect to the variability amplitude of the emission lines. The emission line wings of H{\\alpha...

  15. Self-adjusting magnetic bearing systems

    DOE Patents [OSTI]

    Post, R.F.

    1998-07-21T23:59:59.000Z

    A self-adjusting magnetic bearing automatically adjusts the parameters of an axially unstable magnetic bearing such that its force balance is maintained near the point of metastable equilibrium. Complete stabilization can be obtained with the application of weak restoring forces either from a mechanical bearing (running at near-zero load, thus with reduced wear) or from the action of residual eddy currents in a snubber bearing. In one embodiment, a torque is generated by the approach of a slotted pole to a conducting plate. The torque actuates an assembly which varies the position of a magnetic shunt to change the force exerted by the bearing. Another embodiment achieves axial stabilization by sensing vertical displacements in a suspended bearing element, and using this information in an electrical servo system. In a third embodiment, as a rotating eddy current exciter approaches a stationary bearing, it heats a thermostat which actuates an assembly to weaken the attractive force between the two bearing elements. An improved version of an electromechanical battery utilizing the designs of the various embodiments is described. 7 figs.

  16. Self-adjusting magnetic bearing systems

    DOE Patents [OSTI]

    Post, Richard F. (Walnut Creek, CA)

    1998-01-01T23:59:59.000Z

    A self-adjusting magnetic bearing automatically adjusts the parameters of an axially unstable magnetic bearing such that its force balance is maintained near the point of metastable equilibrium. Complete stabilization can be obtained with the application of weak restoring forces either from a mechanical bearing (running at near-zero load, thus with reduced wear) or from the action of residual eddy currents in a snubber bearing. In one embodiment, a torque is generated by the approach of a slotted pole to a conducting plate. The torque actuates an assembly which varies the position of a magnetic shunt to change the force exerted by the bearing. Another embodiment achieves axial stabilization by sensing vertical displacements in a suspended bearing element, and using this information in an electrical servo system. In a third embodiment, as a rotating eddy current exciter approaches a stationary bearing, it heats a thermostat which actuates an assembly to weaken the attractive force between the two bearing elements. An improved version of an electromechanical battery utilizing the designs of the various embodiments is described.

  17. Kampung Capacity Local Solutions for

    E-Print Network [OSTI]

    Kammen, Daniel M.

    utility customers. Using a hybrid energy resource optimization framework, we explore optimal configurationKampung Capacity Local Solutions for Sustainable Rural Energy in the Baram River Basin, Sarawak Energy Laboratory (RAEL) & Energy and Resources Group and Goldman School of Public Policy Release Date

  18. Data aggregation for capacity management

    E-Print Network [OSTI]

    Lee, Yong Woo

    2004-09-30T23:59:59.000Z

    This thesis presents a methodology for data aggregation for capacity management. It is assumed that there are a very large number of products manufactured in a company and that every product is stored in the database with its standard unit per hour...

  19. Adjusting the IP $\\beta$ Functions in RHIC

    E-Print Network [OSTI]

    Wittmer, W; Pilat, F; Ptitsyn, V; Van Zeijts, J

    2004-01-01T23:59:59.000Z

    The beta functions at the IP can be adjusted without perturbation of other optics functions via several approaches. In this paper we describe a scheme based on a vector knob, which assigns fixed values to the different tuning quadrupoles and scales them by a common multiplier. The values for the knob vector were calculated for a lattice without any errors using MADX. Previous studies for the LHC [1] have shown that this approach can meet the design goals. A specific feature of the RHIC lattice is the nested power supply system. To cope with the resulting problems a detailed response matrix analysis has been carried out and different sets of knobs were calculated and compared. The knobs were tested at RHIC during the 2004 run and preliminary results are discussed. Simultaneously a new approach to measure the beam sizes of both colliding beams at the IP, based on the tunability provided by the knobs, was developed and tested.

  20. Scheme for rapid adjustment of network impedance

    DOE Patents [OSTI]

    Vithayathil, John J. (3814 NE. 136th Pl., Portland, OR 97230)

    1991-01-01T23:59:59.000Z

    A static controlled reactance device is inserted in series with an AC electric power transmission line to adjust its transfer impedance. An inductor (reactor) is serially connected with two back-to-back connected thyristors which control the conduction period and hence the effective reactance of the inductor. Additional reactive elements are provided in parallel with the thyristor controlled reactor to filter harmonics and to obtain required range of variable reactance. Alternatively, the static controlled reactance device discussed above may be connected to the secondary winding of a series transformer having its primary winding connected in series to the transmission line. In a three phase transmission system, the controlled reactance device may be connected in delta configuration on the secondary side of the series transformer to eliminate triplen harmonics.

  1. Permanent-magnet multipole with adjustable strength

    DOE Patents [OSTI]

    Halbach, K.

    1982-09-20T23:59:59.000Z

    Two or more magnetically soft pole pieces are symmetrically positioned along a longitudinal axis to provide a magnetic field within a space defined by the pole pieces. Two or more permanent magnets are mounted to an external magnetically-soft cylindrical sleeve which rotates to bring the permanent magnets into closer coupling with the pole pieces and thereby adjustably control the field strength of the magnetic field produced in the space defined by the pole pieces. The permanent magnets are preferably formed of rare earth cobalt (REC) material which has a high remanent magnetic field and a strong coercive force. The pole pieces and the permanent magnets have corresponding cylindrical surfaces which are positionable with respect to each other to vary the coupling there between. Auxiliary permanent magnets are provided between the pole pieces to provide additional magnetic flux to the magnetic field without saturating the pole pieces.

  2. Permanent magnet multipole with adjustable strength

    DOE Patents [OSTI]

    Halbach, Klaus (Berkeley, CA)

    1985-01-01T23:59:59.000Z

    Two or more magnetically soft pole pieces are symmetrically positioned along a longitudinal axis to provide a magnetic field within a space defined by the pole pieces. Two or more permanent magnets are mounted to an external magnetically-soft cylindrical sleeve which rotates to bring the permanent magnets into closer coupling with the pole pieces and thereby adjustably control the field strength of the magnetic field produced in the space defined by the pole pieces. The permanent magnets are preferably formed of rare earth cobalt (REC) material which has a high remanent magnetic field and a strong coercive force. The pole pieces and the permanent magnets have corresponding cylindrical surfaces which are positionable with respect to each other to vary the coupling therebetween. Auxiliary permanent magnets are provided between the pole pieces to provide additional magnetic flux to the magnetic field without saturating the pole pieces.

  3. Adjustable flow rate controller for polymer solutions

    DOE Patents [OSTI]

    Jackson, Kenneth M. (Bartlesville, OK)

    1981-01-01T23:59:59.000Z

    An adjustable device for controlling the flow rate of polymer solutions which results in only little shearing of the polymer molecules, said device comprising an inlet manifold, an outlet manifold, a plurality of tubes capable of providing communication between said inlet and outlet manifolds, said tubes each having an internal diameter that is smaller than that of the inlet manifold and large enough to insure that viscosity of the polymer solution passing through each said tube will not be reduced more than about 25 percent, and a valve associated with each tube, said valve being capable of opening or closing communication in that tube between the inlet and outlet manifolds, each said valve when fully open having a diameter that is substantially at least as great as that of the tube with which it is associated.

  4. Elliptically polarizing adjustable phase insertion device

    DOE Patents [OSTI]

    Carr, R.

    1995-01-17T23:59:59.000Z

    An insertion device for extracting polarized electromagnetic energy from a beam of particles is disclosed. The insertion device includes four linear arrays of magnets which are aligned with the particle beam. The magnetic field strength to which the particles are subjected is adjusted by altering the relative alignment of the arrays in a direction parallel to that of the particle beam. Both the energy and polarization of the extracted energy may be varied by moving the relevant arrays parallel to the beam direction. The present invention requires a substantially simpler and more economical superstructure than insertion devices in which the magnetic field strength is altered by changing the gap between arrays of magnets. 3 figures.

  5. Adjustable shear stress erosion and transport flume

    DOE Patents [OSTI]

    Roberts, Jesse D. (Carlsbad, NM); Jepsen, Richard A. (Carlsbad, NM)

    2002-01-01T23:59:59.000Z

    A method and apparatus for measuring the total erosion rate and downstream transport of suspended and bedload sediments using an adjustable shear stress erosion and transport (ASSET) flume with a variable-depth sediment core sample. Water is forced past a variable-depth sediment core sample in a closed channel, eroding sediments, and introducing suspended and bedload sediments into the flow stream. The core sample is continuously pushed into the flow stream, while keeping the surface level with the bottom of the channel. Eroded bedload sediments are transported downstream and then gravitationally separated from the flow stream into one or more quiescent traps. The captured bedload sediments (particles and aggregates) are weighed and compared to the total mass of sediment eroded, and also to the concentration of sediments suspended in the flow stream.

  6. Remote adjustable focus Raman spectroscopy probe

    DOE Patents [OSTI]

    Schmucker, John E. (Hurt, VA); Blasi, Raymond J. (Harrison City, PA); Archer, William B. (Bethel Park, PA)

    1999-01-01T23:59:59.000Z

    A remote adjustable focus Raman spectroscopy probe allows for analyzing Raman scattered light from a point of interest external probe. An environmental barrier including at least one window separates the probe from the point of interest. An optical tube is disposed adjacent to the environmental barrier and includes a long working length compound lens objective next to the window. A beam splitter and a mirror are at the other end. A mechanical means is used to translated the prove body in the X, Y, and Z directions resulting in a variable focus optical apparatus. Laser light is reflected by the beam splitter and directed toward the compound lens objective, then through the window and focused on the point of interest. Raman scattered light is then collected by the compound lens objective and directed through the beam splitter to a mirror. A device for analyzing the light, such as a monochrometer, is coupled to the mirror.

  7. Excitation and Disruption of a Giant Molecular Cloud by the Supernova Remnant 3C391

    E-Print Network [OSTI]

    William T. Reach; Jeonghee Rho

    1998-07-28T23:59:59.000Z

    Using the IRAM 30-m telescope, we observed the supernova remnant 3C 391 (G31.9+0.0) and its surroundings in the CO(2-1), HCO+(1-0), CS(2-1), CS(3-2), and CS(5-4) lines. The ambient molecular gas at the distance (9 kpc) of the remnant comprises a giant molecular cloud whose edge is closely parallel to a ridge of bright non-thermal radio continuum, which evidently delineates the blast-wave into the cloud. We found that in a small (0.6 pc) portion of the radio shell, the molecular line profiles consist of a narrow (2 km/s) component, plus a very wide (> 20 km/s) component. Both spectral components peak within 20" of a previously-detected OH 1720 MHz maser. We name this source 3C 391:BML (broad molecular line); it provides a new laboratory, similar to IC 443 but on a larger scale, to study shock interactions with dense molecular gas. The wide spectral component is relatively brighter in the higher-excitation lines. We interpret the wide spectral component as post-shock gas, either smoothly accelerated or partially dissociated and reformed behind the shock. The narrow component is either the pre-shock gas or cold gas reformed behind a fully dissociative shock. Using the 3 observed CS lines, we measured the temperature, CS column density, and H2 volume density in a dense clump in the parent molecular cloud as well as the wide-line and narrow-line portions of the shocked clump. The physical conditions of the narrow-line gas are comparable to the highest-density clumps in the giant molecular cloud, while the wide-line gas is both warmer and denser. The mass of compressed gas in 3C 391:BML is high enough that its self-gravity is significant, and eventually it could form one or several stars.

  8. High capacity immobilized amine sorbents

    DOE Patents [OSTI]

    Gray, McMahan L. (Pittsburgh, PA); Champagne, Kenneth J. (Fredericktown, PA); Soong, Yee (Monroeville, PA); Filburn, Thomas (Granby, CT)

    2007-10-30T23:59:59.000Z

    A method is provided for making low-cost CO.sub.2 sorbents that can be used in large-scale gas-solid processes. The improved method entails treating an amine to increase the number of secondary amine groups and impregnating the amine in a porous solid support. The method increases the CO.sub.2 capture capacity and decreases the cost of utilizing an amine-enriched solid sorbent in CO.sub.2 capture systems.

  9. Load controller and method to enhance effective capacity of a photovoltaic power supply

    DOE Patents [OSTI]

    Perez, Richard (Delmar, NY)

    2000-01-01T23:59:59.000Z

    A load controller and method are provided for maximizing effective capacity of a non-controllable, renewable power supply coupled to a variable electrical load also coupled to a conventional power grid. Effective capacity is enhanced by monitoring power output of the renewable supply and loading, and comparing the loading against the power output and a load adjustment threshold determined from an expected peak loading. A value for a load adjustment parameter is calculated by subtracting the renewable supply output and the load adjustment parameter from the current load. This value is then employed to control the variable load in an amount proportional to the value of the load control parameter when the parameter is within a predefined range. By so controlling the load, the effective capacity of the non-controllable, renewable power supply is increased without any attempt at operational feedback control of the renewable supply. The renewable supply may comprise, for example, a photovoltaic power supply or a wind-based power supply.

  10. Capacity expansion in contemporary telecommunication networks

    E-Print Network [OSTI]

    Sivaraman, Raghavendran

    2007-01-01T23:59:59.000Z

    We study three capacity expansion problems in contemporary long distance telecommunication networks. The first two problems, motivated by a major long distance provider, address capacity expansion in national hybrid long ...

  11. Neural substrates of cognitive capacity limitations

    E-Print Network [OSTI]

    Buschman, Tim

    Cognition has a severely limited capacity: Adult humans can retain only about four items “in mind”. This limitation is fundamental to human brain function: Individual capacity is highly correlated with intelligence measures ...

  12. FURTHER EXPERIMENTS IN FISHWAY CAPACITY, 1957

    E-Print Network [OSTI]

    capacity trials 7 Maximum entry and exit 7 Entry capacity 8 Maximum number of fish present in the fishway 8 on 16 and a mean depth of 6. 3 feet. Maximum observed entry and exit of salmonids are discussed

  13. Trade Adjustment Assistance Community College and Career Training...

    Broader source: Energy.gov (indexed) [DOE]

    View a list of all current Trade Adjustment Assistance Community College and Career Training (TAACCCT) grant program awards containing Energy andor Manufacturing topics. This...

  14. adjustable speed ac: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Input Voltage Sag and Unbalance on DC Link Inductor and Capacitor Stress in Adjustable Speed Drives Renewable Energy Websites Summary: 's transition into single-phase operation,...

  15. ac adjustable speed: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Input Voltage Sag and Unbalance on DC Link Inductor and Capacitor Stress in Adjustable Speed Drives Renewable Energy Websites Summary: 's transition into single-phase operation,...

  16. Adjustment Data Report for Fiscal Years Prior to 2008 | Department...

    Broader source: Energy.gov (indexed) [DOE]

    covers the adjustment data report for fiscal years prior to 2008. energydatareport.xls More Documents & Publications Reporting Guidance for Federal Agency Annual Report on Energy...

  17. ,"New York Dry Natural Gas Reserves Adjustments (Billion Cubic...

    U.S. Energy Information Administration (EIA) Indexed Site

    Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","New York Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)",1,"Annual",2013 ,"Release...

  18. Optimization Online - Robust risk adjustment in health insurance

    E-Print Network [OSTI]

    Tengjiao Xiao

    2014-08-08T23:59:59.000Z

    Aug 8, 2014 ... Abstract: Risk adjustment is used to calibrate payments to health plans based on the relative health status of insured populations and helps ...

  19. Voluntary Initiative: Partnering to Enhance Program Capacity...

    Energy Savers [EERE]

    to Enhance Program Capacity Better Buildings Residential Network Program Sustainability Peer Exchange Call Series: Voluntary Initiative: Partnering to Enhance Program...

  20. Can Science and Technology Capacity be Measured?

    E-Print Network [OSTI]

    Wagner, Caroline S; Dutta, Arindum

    2015-01-01T23:59:59.000Z

    The ability of a nation to participate in the global knowledge economy depends to some extent on its capacities in science and technology. In an effort to assess the capacity of different countries in science and technology, this article updates a classification scheme developed by RAND to measure science and technology capacity for 150 countries of the world.

  1. An IC/CMB interpretation for the large-scale jet X-ray emission of 3C 273

    E-Print Network [OSTI]

    Liu, Wen-Po

    2015-01-01T23:59:59.000Z

    We present that the model of inverse Compton scattering of cosmic microwave background photons (IC/CMB) could well explain the large-scale jet X-ray radiation of 3C 273, and does not violate new Fermi observations. For the individual knots, the synchrotron spectrum of the low-energy electrons responsible for the IC/CMB X-ray emission may be different from the extrapolation of the 10GHz radio spectrum of knots. Based on the IC/CMB model for the 3C 273 large-scale jet, the Fermi observations may mainly come from the small-scale jet of 3C 273 (i.e., the core). Future observations could examine our interpretation on the spectral energy distributions (SED) of knots and large-scale jet in 3C 273.

  2. Concurrent 43 and 86 GHz Very Long Baseline Polarimetry of 3C273

    E-Print Network [OSTI]

    Joanne M. Attridge; John F. C. Wardle; Daniel C. Homan

    2005-06-10T23:59:59.000Z

    We present sub-milliarcsecond resolution total intensity and linear polarization VLBI images of 3C273, using concurrent 43 and 86 GHz data taken with the Very Long Baseline Array in May 2002. The structure seen in the innermost jet suggest that we have fortuitously caught the jet in the act of changing direction. The polarization images confirm that the core is unpolarized (fractional polarization m 5.2 x 10^{4} rad m^{-2} must be present in or in front of that region. These are among the highest rotation measures reported so far in the nucleus of any active galaxy or quasar, and must occur outside (but probably close to) the radio emitting region. The transverse rotation measure gradient is in the same sense as that observed by Asada et al and by Zavala and Taylor at greater core distances. The magnitude of the transverse gradient decreases rapidly with distance down the jet, and appears to be variable.

  3. Overdensity of X-Ray sources near 3C 295: a candidate filament

    E-Print Network [OSTI]

    V. D'Elia; F. Fiore; F. Cocchia

    2004-07-22T23:59:59.000Z

    We present a statistical analysis of the Chandra observation of the source field around the 3C 295 galaxy cluster (z=0.46) aimed at the search for clustering of X-ray sources. Three different methods of analysis, namely a chip by chip logN-logS, a two dimensional Kolmogorov-Smirnov test, and the angular correlation function (ACF) show a strong overdensity of sources in the North-East of the field. In particular, the ACF shows a clear signal on scales of 0.5 - 5 arcmin. This correlation angle is > 2 times higher than that of a sample of 8 ACIS-I field at the 2.5 sigma confidence level. If this overdensity is spatially associated to the cluster, we are observing a 'filament' of the large scale structure of the Universe. We discuss some first results that seem to indicate such an association.

  4. Bound States of (Anti-)Scalar-Quarks in SU(3)c Lattice QCD

    SciTech Connect (OSTI)

    Iida, H.; Takahashi, T. T. [Yukawa Institute for Theoretical Physics, Kyoto University, Sakyo, Kyoto 606-8502 (Japan); Suganuma, H. [Department of Physics, Graduate School of Science, Kyoto University, Kyoto 606-8502 (Japan)

    2007-06-13T23:59:59.000Z

    Light scalar-quarks {phi} (colored scalar particles or idealized diquarks) and their color-singlet hadronic states are studied with quenched SU(3)c lattice QCD in terms of mass generation. We investigate 'scalar-quark mesons' {phi}{dagger}{phi} and 'scalar-quark baryons' {phi}{phi}{phi} as the bound states of scalar-quarks {phi}. We also investigate the bound states of scalar-quarks {phi} and quarks {psi}, i.e., {phi}{dagger}{psi}, {psi}{psi}{phi} and {phi}{phi}{psi}, which we name 'chimera hadrons'. All the new-type hadrons including {phi} are found to have a large mass due to large quantum corrections by gluons, even for zero bare scalar-quark mass m{phi} = 0 at a-1 {approx} 1GeV. We conjecture that all colored particles generally acquire a large effective mass due to dressed gluon effects.

  5. The Heart-shaped Supernova Remnant 3C391 viewed in Multi-bands

    E-Print Network [OSTI]

    Yang Su; Yang Chen

    2007-03-29T23:59:59.000Z

    Using Chandra X-ray, Spitzer mid-IR, and 1.5 GHz radio data, we examine the spatial structure of SNR 3C391. The X-ray surface brightness is generally anti-correlative with the IR and radio brightness. The multiband data clearly exhibit a heart-shaped morphology and show the multi-shell structure of the remnant. A thin brace-like shell on the south detected at 24 um is projected outside the radio border and confines the southern faint X-ray emission. The leading 24 um knot on the SE boundary appears to be partly surrounded by soft X-ray emitting gas. The mid-IR emission is dominated by the contribution of the shocked dust grains, which may have been partly destroyed by sputtering.

  6. Origin of radiation tolerance in 3C-SiC with nanolayered planar defects

    SciTech Connect (OSTI)

    Ishimaru, Dr. Manabu [Osaka University; Zhang, Yanwen [ORNL; Shannon, Prof. Steven [North Carolina State University; Weber, William J [ORNL

    2013-01-01T23:59:59.000Z

    We have recently found that the radiation tolerance of SiC is highly enhanced by introducing nanolayers of stacking faults and twins [Y. Zhang et al., Phys. Chem. Chem. Phys. 14, 13429 (2012)]. To reveal the origin of this radiation resistance, we used in situ transmission electron microscopy to examine structural changes induced by electron beam irradiation in 3C-SiC containing nanolayers of (111) planar defects. We found that preferential amorphization, when it does occur, takes place at grain boundaries and at 111 and 111 planar defects. Radiationinduced point defects, such as interstitials and vacancies, migrate two-dimensionally between the (111) planar defects, which probably enhances the damage recovery.

  7. Capacity fade of Sony 18650 cells cycled at elevated temperatures Part II. Capacity fade analysis

    E-Print Network [OSTI]

    Popov, Branko N.

    Capacity fade of Sony 18650 cells cycled at elevated temperatures Part II. Capacity fade analysis P August 2002 Abstract A complete capacity fade analysis was carried out for Sony 18650 cells cycled the other losses. # 2002 Elsevier Science B.V. All rights reserved. Keywords: Capacity fade; Sony 18650

  8. CSEM WP 120 Asymmetric Price Adjustment and Consumer Search

    E-Print Network [OSTI]

    California at Berkeley. University of

    CSEM WP 120 Asymmetric Price Adjustment and Consumer Search: An Examination of the Retail Gasoline of Economics November 13, 2003 Abstract It has been documented that retail gasoline prices respond more quickly theoretical model of asymmetric adjustment that empiri- cally matches observed retail gasoline price behavior

  9. Upgrade LCDs or TVs with improved ergonomic adjustability

    E-Print Network [OSTI]

    Saskatchewan, University of

    Highlights · Upgrade LCDs or TVs with improved ergonomic adjustability · Constant Force (CFTM) patented lift-and-pivot motion technology produces smooth adjustment · Neo-Flex LCD Stand is the only range of movement to your LCD display or TV with the Neo-Flex LCD Stand! This proven technology is now

  10. Risk adjusted control charts for health care Willem Albers

    E-Print Network [OSTI]

    Al Hanbali, Ahmad

    )) strongly suggest to apply SPC methods, in particular control charts, and we shall follow that line hereRisk adjusted control charts for health care monitoring Willem Albers Department of Applied membership can be used to adjust the basic negative binomial charts to the actual risk incurred. Attention

  11. Would Border Carbon Adjustments prevent carbon leakage and heavy industry

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    No 52-2013 Would Border Carbon Adjustments prevent carbon leakage and heavy industry halshs-00870689,version1-7Oct2013 #12;Would Border Carbon Adjustments prevent carbon leakage and heavy The efficiency of unilateral climate policies may be hampered by carbon leakage and competitiveness losses

  12. STAR-JET INTERACTIONS AND GAMMA-RAY OUTBURSTS FROM 3C454.3

    SciTech Connect (OSTI)

    Khangulyan, D. V. [Institute of Space and Astronautical Science/JAXA, 3-1-1 Yoshinodai, Chuo-ku, Sagamihara, Kanagawa 252-5210 (Japan); Barkov, M. V. [Max-Planck-Institut fuer Kernphysik, Saupfercheckweg 1, D-69117 Heidelberg (Germany); Bosch-Ramon, V. [Departament d'Astronomia i Meteorologia, Institut de Ciencies del Cosmos (ICC), Universitat de Barcelona (IEEC-UB), Marti i Franques 1, E-08028 Barcelona (Spain); Aharonian, F. A. [Dublin Institute for Advanced Studies, 31 Fitzwilliam Place, Dublin 2 (Ireland); Dorodnitsyn, A. V. [Laboratory for High Energy Astrophysics, NASA Goddard Space Flight Center, Code 662, Greenbelt, MD 20771 (United States)

    2013-09-10T23:59:59.000Z

    We propose a model to explain the ultra-bright GeV gamma-ray flares observed from the blazar 3C454.3. The model is based on the concept of a relativistic jet interacting with compact gas condensations produced when a star (a red giant) crosses the jet close to the central black hole. The study includes an analytical treatment of the evolution of the envelope lost by the star within the jet, and calculations of the related high-energy radiation. The model readily explains the day-long that varies on timescales of hours, GeV gamma-ray flare from 3C454.3, observed during 2010 November on top of a plateau lasting weeks. In the proposed scenario, the plateau state is caused by a strong wind generated by the heating of the stellar atmosphere due to nonthermal particles accelerated at the jet-star interaction region. The flare itself could be produced by a few clouds of matter lost by the red giant after the initial impact of the jet. In the framework of the proposed scenario, the observations constrain the key model parameters of the source, including the mass of the central black hole: M{sub BH} {approx_equal} 10{sup 9} M{sub Sun }, the total jet power: L{sub j} {approx_equal} 10{sup 48} erg s{sup -1}, and the Doppler factor of the gamma-ray emitting clouds: {delta} {approx_equal} 20. Whereas we do not specify the particle acceleration mechanisms, the potential gamma-ray production processes are discussed and compared in the context of the proposed model. We argue that synchrotron radiation of protons has certain advantages compared to other radiation channels of directlyaccelerated electrons. An injected proton distribution {proportional_to}E {sup -1} or harder below the relevant energies would be favored to alleviate the tight energetic constraints and to avoid the violation of the observational low-energy constraints.

  13. Systems Analysis of an Advanced Nuclear Fuel Cycle Based on a Modified UREX+3c Process

    SciTech Connect (OSTI)

    E. R. Johnson; R. E. Best

    2009-12-28T23:59:59.000Z

    The research described in this report was performed under a grant from the U.S. Department of Energy (DOE) to describe and compare the merits of two advanced alternative nuclear fuel cycles -- named by this study as the “UREX+3c fuel cycle” and the “Alternative Fuel Cycle” (AFC). Both fuel cycles were assumed to support 100 1,000 MWe light water reactor (LWR) nuclear power plants operating over the period 2020 through 2100, and the fast reactors (FRs) necessary to burn the plutonium and minor actinides generated by the LWRs. Reprocessing in both fuel cycles is assumed to be based on the UREX+3c process reported in earlier work by the DOE. Conceptually, the UREX+3c process provides nearly complete separation of the various components of spent nuclear fuel in order to enable recycle of reusable nuclear materials, and the storage, conversion, transmutation and/or disposal of other recovered components. Output of the process contains substantially all of the plutonium, which is recovered as a 5:1 uranium/plutonium mixture, in order to discourage plutonium diversion. Mixed oxide (MOX) fuel for recycle in LWRs is made using this 5:1 U/Pu mixture plus appropriate makeup uranium. A second process output contains all of the recovered uranium except the uranium in the 5:1 U/Pu mixture. The several other process outputs are various waste streams, including a stream of minor actinides that are stored until they are consumed in future FRs. For this study, the UREX+3c fuel cycle is assumed to recycle only the 5:1 U/Pu mixture to be used in LWR MOX fuel and to use depleted uranium (tails) for the makeup uranium. This fuel cycle is assumed not to use the recovered uranium output stream but to discard it instead. On the other hand, the AFC is assumed to recycle both the 5:1 U/Pu mixture and all of the recovered uranium. In this case, the recovered uranium is reenriched with the level of enrichment being determined by the amount of recovered plutonium and the combined amount of the resulting MOX. The study considered two sub-cases within each of the two fuel cycles in which the uranium and plutonium from the first generation of MOX spent fuel (i) would not be recycled to produce a second generation of MOX for use in LWRs or (ii) would be recycled to produce a second generation of MOX fuel for use in LWRs. The study also investigated the effects of recycling MOX spent fuel multiple times in LWRs. The study assumed that both fuel cycles would store and then reprocess spent MOX fuel that is not recycled to produce a next generation of LWR MOX fuel and would use the recovered products to produce FR fuel. The study further assumed that FRs would begin to be brought on-line in 2043, eleven years after recycle begins in LWRs, when products from 5-year cooled spent MOX fuel would be available. Fuel for the FRs would be made using the uranium, plutonium, and minor actinides recovered from MOX. For the cases where LWR fuel was assumed to be recycled one time, the 1st generation of MOX spent fuel was used to provide nuclear materials for production of FR fuel. For the cases where the LWR fuel was assumed to be recycled two times, the 2nd generation of MOX spent fuel was used to provide nuclear materials for production of FR fuel. The number of FRs in operation was assumed to increase in successive years until the rate that actinides were recovered from permanently discharged spent MOX fuel equaled the rate the actinides were consumed by the operating fleet of FRs. To compare the two fuel cycles, the study analyzed recycle of nuclear fuel in LWRs and FRs and determined the radiological characteristics of irradiated nuclear fuel, nuclear waste products, and recycle nuclear fuels. It also developed a model to simulate the flows of nuclear materials that could occur in the two advanced nuclear fuel cycles over 81 years beginning in 2020 and ending in 2100. Simulations projected the flows of uranium, plutonium, and minor actinides as these nuclear fuel materials were produced and consumed in a fleet of 100 1,000 MWe LWRs and in FRs. The model als

  14. Scalar-Quark Systems and Chimera Hadrons in SU(3)_c Lattice QCD

    E-Print Network [OSTI]

    Iida, H; Takahashi, T T

    2007-01-01T23:59:59.000Z

    Light scalar-quarks \\phi (colored scalar particles or idealized diquarks) and their color-singlet hadronic states are studied with quenched SU(3)_c lattice QCD in terms of mass generation in strong interaction without chiral symmetry breaking. We investigate ``scalar-quark mesons'' \\phi^\\dagger \\phi and ``scalar-quark baryons'' \\phi\\phi\\phi which are the bound states of scalar-quarks \\phi. We also investigate the bound states of scalar-quarks \\phi and quarks \\psi, i.e., \\phi^\\dagger \\psi, \\psi\\psi\\phi and \\phi\\phi\\psi, which we name ``chimera hadrons''. All the new-type hadrons including \\phi are found to have a large mass even for zero bare scalar-quark mass m_\\phi=0 at a^{-1}\\simeq 1GeV. We find that the constituent scalar-quark and quark picture is satisfied for all the new-type hadrons. Namely, the mass of the new-type hadron composed of m \\phi's and n \\psi's, M_{{m}\\phi+{n}\\psi}, satisfies M_{{m}\\phi+{n}\\psi}\\simeq {m} M_\\phi +{n} M_\\psi, where M_\\phi and M_\\psi are the constituent scalar-quark and quark...

  15. FIRST-PRINCIPLES CALCULATIONS OF INTRINSIC DEFECTS AND Mg TRANSMUTANTS IN 3C-SiC

    SciTech Connect (OSTI)

    Hu, Shenyang Y.; Setyawan, Wahyu; Van Ginhoven, Renee M.; Jiang, Weilin; Henager, Charles H.; Kurtz, Richard J.

    2013-09-25T23:59:59.000Z

    Silicon carbide (SiC) possesses many desirable attributes for applications in high-temperature and neutron radiation environments. These attributes include excellent dimensional and thermodynamic stability, low activation, high strength, and high thermal conductivity. Therefore, SiC based materials draw broad attention as structural materials for the first wall (FW) and blanket in fusion power plants. Under the severe high-energy neutron environment of D-T fusion systems, SiC suffers significant transmutation resulting in both gaseous and metallic transmutants. Recent calculations by Sawan, et al. [2] predict that at a fast neutron dose of ~100 dpa, there will be about 0.5 at% Mg generated in SiC through nuclear transmutation. Other transmutation products, including 0.15 at% Al, 0.2 at% Be and 2.2 at% He, also emerge. Formation and migration energies of point defects in 3C-SiC have been widely investigated using density functional theory (DFT). However, the properties of defects associated with transmutants are currently not well understood. Fundamental understanding of where the transmutation products go and how they affect microstructure evolution of SiC composites will help to predict property evolution and performance of SiC-based materials in fusion reactors.

  16. Solar Energy and Capacity Value (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-09-01T23:59:59.000Z

    This is a one-page, two-sided fact sheet on the capacity of solar power to provide value to utilities and power system operators.

  17. Increasing water holding capacity for irrigation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Increasing water holding capacity for irrigation Reseachers recommend solutions for sediment trapping in irrigation system LANL and SNL leveraged technical expertise to determine...

  18. Worldwide Energy Efficiency Action through Capacity Building...

    Open Energy Info (EERE)

    and Training (WEACT) Jump to: navigation, search Logo: Worldwide Energy Efficiency Action through Capacity Building and Training (WEACT) Name Worldwide Energy Efficiency Action...

  19. Quantum Capacities of Channels with small Environment

    E-Print Network [OSTI]

    Michael M. Wolf; David Perez-Garcia

    2006-07-11T23:59:59.000Z

    We investigate the quantum capacity of noisy quantum channels which can be represented by coupling a system to an effectively small environment. A capacity formula is derived for all cases where both system and environment are two-dimensional--including all extremal qubit channels. Similarly, for channels acting on higher dimensional systems we show that the capacity can be determined if the channel arises from a sufficiently small coupling to a qubit environment. Extensions to instances of channels with larger environment are provided and it is shown that bounds on the capacity with unconstrained environment can be obtained from decompositions into channels with small environment.

  20. adjusted correlation analysis: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the quickest convergence to maxmin-fair states. Whereas Chiu-Jain model rests on a well modeling, it is still common to use Chiu-Jain model for comparison of binary adjust-...

  1. An asset-pricing view of external adjustment

    E-Print Network [OSTI]

    Pavlova, Anna

    Recent literature has argued that conventional measures of external sustainability – the trade balance and current account – are misleading because they omit capital gains on net foreign asset positions. We adjust the ...

  2. ADJUSTMENT COEFFICIENT FOR RISK PROCESSES IN SOME DEPENDENT CONTEXTS

    E-Print Network [OSTI]

    Maume-Deschamps, Véronique

    ADJUSTMENT COEFFICIENT FOR RISK PROCESSES IN SOME DEPENDENT CONTEXTS H. COSSETTE, E. MARCEAU, AND V, ruin theory, non para- metric estimation, weak dependence. . 1 #12;2 H. COSSETTE, E. MARCEAU, AND V

  3. ADJUSTMENT COEFFICIENT FOR RISK PROCESSES IN SOME DEPENDENT CONTEXTS

    E-Print Network [OSTI]

    Boyer, Edmond

    ADJUSTMENT COEFFICIENT FOR RISK PROCESSES IN SOME DEPENDENT CONTEXTS H. COSSETTE, E. MARCEAU, AND V" DOI : 10.1007/s11009-010-9182-y #12;2 H. COSSETTE, E. MARCEAU, AND V. MAUME-DESCHAMPS with UTu = u

  4. A Study of Adjustable Speed Drive Applications for Pumps

    E-Print Network [OSTI]

    Triezenberg, D. M.; Lakhavani, S. T.

    1983-01-01T23:59:59.000Z

    A STUDY OF ADJUSTABLE SPEED DRIVE APPLICATIONS FOR PUMPS D. M. Triezenberg and S. T. Lakhavani Westinghouse R&D Center Pittsburgh, Pennsylvania ABSTRACT We have undertaken a survey and analysis of potential ASD applications for pumps in U...

  5. Support assembly having three dimension position adjustment capabilities

    DOE Patents [OSTI]

    Cutburth, R.W.; House, F.A.

    1985-11-08T23:59:59.000Z

    An assembly for supporting an apparatus such as a microscope or laser to and against a planer surface is disclosed herein. This apparatus includes three specific arrangements for adjusting the positions of three segments of the apparatus so as to adjust the position of the overall apparatus with respect to the planer surface in the x-, y- and z-directions, where the x-direction and the y-direction are both parallel with the planer surface and perpendicular to one another and where the z-direction is perpendicular to the planer surface and the x- and y-directions. Each of two of the three arrangements includes its own means for providing x-, y- and z-adjustments (which includes rotation in the x, y plane) while it is only necessary for the third arrangement to provide adjustments in the z-direction.

  6. Constraining the extension of a possible gamma-ray halo of 3C 279 from 2008-2014 solar occultations

    E-Print Network [OSTI]

    Kotelnikov, Egor; Troitsky, Sergey

    2014-01-01T23:59:59.000Z

    The angular extension of the gamma-ray image of 3C 279 may be constrained by studying its solar occultations as suggested by Fairbairn et al. (2010). We perform this kind of analysis for seven occultations observed by Fermi-LAT in 2008-2014, using the Fermi-LAT Solar System tools. The results are interpreted in terms of models with extended gamma-ray halo of 3C 279; first constraints on the size and the flux of the halo are reported.

  7. Method for preparing membranes with adjustable separation performance

    DOE Patents [OSTI]

    Peterson, E.S.; Orme, C.J.; Stone, M.L.

    1995-01-31T23:59:59.000Z

    Methods for adjustable separation of solutes and solvents involve the combination of the use of a maximally swollen membrane and subsequent vacuum depressurization exerted on the permeate side of that membrane. By adjusting the extent of depressurization it is possible to separate solvent from solutes and solutes from each other. Improved control of separation parameters as well as improved flux rates characterize the present invention. 2 figs.

  8. Data:089cbb3c-55a9-4632-9dee-014fc8aaadf4 | Open Energy Information

    Open Energy Info (EERE)

    from 10pm-6am Small Commercial Sector: Commercial Description: The current Regulatory Cost Charge is 0.000578kWh for all accounts. The current Power Cost Adjustment is...

  9. North Dakota Refining Capacity Study

    SciTech Connect (OSTI)

    Dennis Hill; Kurt Swenson; Carl Tuura; Jim Simon; Robert Vermette; Gilberto Marcha; Steve Kelly; David Wells; Ed Palmer; Kuo Yu; Tram Nguyen; Juliam Migliavacca

    2011-01-05T23:59:59.000Z

    According to a 2008 report issued by the United States Geological Survey, North Dakota and Montana have an estimated 3.0 to 4.3 billion barrels of undiscovered, technically recoverable oil in an area known as the Bakken Formation. With the size and remoteness of the discovery, the question became 'can a business case be made for increasing refining capacity in North Dakota?' And, if so what is the impact to existing players in the region. To answer the question, a study committee comprised of leaders in the region's petroleum industry were brought together to define the scope of the study, hire a consulting firm and oversee the study. The study committee met frequently to provide input on the findings and modify the course of the study, as needed. The study concluded that the Petroleum Area Defense District II (PADD II) has an oversupply of gasoline. With that in mind, a niche market, naphtha, was identified. Naphtha is used as a diluent used for pipelining the bitumen (heavy crude) from Canada to crude markets. The study predicted there will continue to be an increase in the demand for naphtha through 2030. The study estimated the optimal configuration for the refinery at 34,000 barrels per day (BPD) producing 15,000 BPD of naphtha and a 52 percent refinery charge for jet and diesel yield. The financial modeling assumed the sponsor of a refinery would invest its own capital to pay for construction costs. With this assumption, the internal rate of return is 9.2 percent which is not sufficient to attract traditional investment given the risk factor of the project. With that in mind, those interested in pursuing this niche market will need to identify incentives to improve the rate of return.

  10. Managing nuclear predominant generating capacity

    SciTech Connect (OSTI)

    Bouget, Y.H.; Herbin, H.C.; Carbonnier, D.

    1998-07-01T23:59:59.000Z

    The most common belief, associated with nuclear power plant, leads to the conclusion that it can only operate, as a base load plant. This observation can be reversed, by just looking at large generating capacity, using an important nuclear generation mix. Nuclear plants may certainly load follow and contribute to the grid frequency control. The French example illustrates these possibilities. The reactor control of French units has been customized to accommodate the grid requests. Managing such a large nuclear plant fleet requires various actions be taken, ranging from a daily to a multi-annual perspective. The paper describes the various contributions leading to safe, reliable, well accepted and cost competitive nuclear plants in France. The combination of all aspects related to operations, maintenance scheduling, nuclear safety management, are presented. The use of PWR units carries considerable weight in economic terms, with several hundred million francs tied in with outage scheduling every year. This necessitates a global view of the entire generating system which can be mobilized to meet demand. There is considerable interaction between units as, on the one hand, they are competing to satisfy the same need, and, on the other hand, reducing maintenance costs means sharing the necessary resources, and thus a coordinated staggering of outages. In addition, nuclear fuel is an energy reserve which remains in the reactor for 3 or 4 years, with some of the fuel renewed each year. Due to the memory effect, the fuel retains a memory of past use, so that today's choices impact upon the future. A medium-term view of fuel management is also necessary.

  11. 86, 43, and 22 GHz VLBI Observations of 3C120

    E-Print Network [OSTI]

    Jose-Luis Gomez; Alan P. Marscher; Antonio Alberdi

    1999-06-11T23:59:59.000Z

    We present the first 86 GHz VLBI observations of the radio galaxy 3C~120, together with contemporaneous 43 and 22 GHz polarimetric VLBA observations. The very high angular resolution obtained at 86 GHz provides an upper limit to the size of the core of 54 $\\mu$as (0.025 $h^{-1}$pc). This represents a direct determination of the base of the jet which is independent of variability arguments (which depend on uncertain estimates of the Doppler factor), and places it below approximately one light-month. Comparison with previous VLBA observations after a one-year interval shows pronounced changes in the structure and polarization of the jet. Most of the components are found to follow a curved path while undergoing a steepening of their spectra accompanied by a decrease in total and polarized emission. However, at least one component is observed to follow a quasi-ballistic motion, accompanied by a flattening of its spectrum, as well as an increase in total and polarized flux. This may be explained by its interaction with the external medium, resulting in a shock that enhances the emission and aligns the magnetic field perpendicular to the component motion, thereby producing an increase of the degree of polarization from undetected values to as high as 15%. A second strong component, with the highest degree of polarization (23%), is found to have experienced a displacement from the ridge line of the structural position angle of the jet as it moved downstream. We have found a mean swing to the south of the position angle of the innermost components of $\\sim 6^{\\circ}$ between late 1996 and 1997, which may be responsible for the jet curvature observed at parsec and kiloparsec scales.

  12. Scalar-Quark Systems and Chimera Hadrons in SU(3)_c Lattice QCD

    E-Print Network [OSTI]

    H. Iida; H. Suganuma; T. T. Takahashi

    2007-05-28T23:59:59.000Z

    Light scalar-quarks \\phi (colored scalar particles or idealized diquarks) and their color-singlet hadronic states are studied with quenched SU(3)_c lattice QCD in terms of mass generation in strong interaction without chiral symmetry breaking. We investigate ``scalar-quark mesons'' \\phi^\\dagger \\phi and ``scalar-quark baryons'' \\phi\\phi\\phi which are the bound states of scalar-quarks \\phi. We also investigate the bound states of scalar-quarks \\phi and quarks \\psi, i.e., \\phi^\\dagger \\psi, \\psi\\psi\\phi and \\phi\\phi\\psi, which we name ``chimera hadrons''. All the new-type hadrons including \\phi are found to have a large mass even for zero bare scalar-quark mass m_\\phi=0 at a^{-1}\\simeq 1GeV. We find that the constituent scalar-quark and quark picture is satisfied for all the new-type hadrons. Namely, the mass of the new-type hadron composed of m \\phi's and n \\psi's, M_{{m}\\phi+{n}\\psi}, satisfies M_{{m}\\phi+{n}\\psi}\\simeq {m} M_\\phi +{n} M_\\psi, where M_\\phi and M_\\psi are the constituent scalar-quark and quark mass, respectively. M_\\phi at m_\\phi=0 estimated from these new-type hadrons is 1.5-1.6GeV, which is larger than that of light quarks, M_\\psi\\simeq 400{\\rm MeV}. Therefore, in the systems of scalar-quark hadrons and chimera hadrons, scalar-quarks acquire large mass due to large quantum corrections by gluons. Together with other evidences of mass generations of glueballs and charmonia, we conjecture that all colored particles generally acquire a large effective mass due to dressed gluon effects.

  13. Dynamics of the Lyman alpha and C IV emitting gas in 3C 273

    E-Print Network [OSTI]

    Stephane Paltani; Marc Turler

    2002-10-04T23:59:59.000Z

    In this paper we study the variability properties of the Lyman alpha and C IV emission lines in 3C273 using archival IUE observations. Our data show for the first time the existence of variability on time scales of several years. We study the spatial distribution and the velocity field of the emitting gas by performing detailed analyses on the line variability using correlations, 1D and 2D response functions, and principal component analysis. In both lines we find evidence for two components, one which has the dynamic properties of gas in Keplerian motion around a black hole with a mass of the order of 10^9 Mo, and one which is characterized by high, blue-shifted velocities at large lag. There is no indication of the presence of optically thick emission medium neither in the Lya, nor in the Civ response functions. The component characterized by blue-shifted velocities, which is comparatively much stronger in Civ than in Lya, is more or less compatible with being the result of gas falling towards the central black hole with free-fall acceleration. We propose however that the line emission at high, blue-shifted velocities is better explained in terms of entrainment of gas clouds by the jet. This gas is therefore probably collisionally excited as a result of heating due to the intense infrared radiation from the jet, which would explain the strength of this component in Civ relative to Lya. This phenomenon might be a signature of disk-jet interaction.

  14. Mitochondrial Respiratory Capacity Is a Critical Regulator

    E-Print Network [OSTI]

    respiratory capacity (SRC). SRC is the extra capacity available in cells to produce energy in response. In response to antigen (Ag) and costimulation, CD8+ T cells undergo a developmental program characterized- ating in response to Ag, it is thought that quiescent T cells (e.g., naive and memory T cells), like

  15. REDUCTION CAPACITY OF SALTSTONE AND SALTSTONE COMPONENTS

    SciTech Connect (OSTI)

    Roberts, K.; Kaplan, D.

    2009-11-30T23:59:59.000Z

    The duration that saltstone retains its ability to immobilize some key radionuclides, such as technetium (Tc), plutonium (Pu), and neptunium (Np), depends on its capacity to maintain a low redox status (or low oxidation state). The reduction capacity is a measure of the mass of reductants present in the saltstone; the reductants are the active ingredients that immobilize Tc, Pu, and Np. Once reductants are exhausted, the saltstone loses its ability to immobilize these radionuclides. The reduction capacity values reported here are based on the Ce(IV)/Fe(II) system. The Portland cement (198 {micro}eq/g) and especially the fly ash (299 {micro}eq/g) had a measurable amount of reduction capacity, but the blast furnace slag (820 {micro}eq/g) not surprisingly accounted for most of the reduction capacity. The blast furnace slag contains ferrous iron and sulfides which are strong reducing and precipitating species for a large number of solids. Three saltstone samples containing 45% slag or one sample containing 90% slag had essentially the same reduction capacity as pure slag. There appears to be some critical concentration between 10% and 45% slag in the Saltstone formulation that is needed to create the maximum reduction capacity. Values from this work supported those previously reported, namely that the reduction capacity of SRS saltstone is about 820 {micro}eq/g; this value is recommended for estimating the longevity that the Saltstone Disposal Facility will retain its ability to immobilize radionuclides.

  16. High Quality Graphene Formation on Improved 3C-SiC Epilayer Michael Walker,1,2

    E-Print Network [OSTI]

    UG-32 High Quality Graphene Formation on Improved 3C-SiC Epilayer Michael Walker,1 excellent electronic, mechanical, photonic properties and 2D nature, graphene is believed to be able to push the semiconductor industry into the beyond- CMOS era. Among all the synthesis methods, the Graphene-On-Silicon (GOS

  17. Epstein-Barr virus nuclear antigens 3C and 3A maintain lymphoblastoid cell growth by repressing

    E-Print Network [OSTI]

    Chen, Yiling

    into continuously proliferating lymphoblast cell lines (LCLs) and for maintaining LCL growth. We now find that EBNA3 with increased transcription. Importantly, knockdown of p16INK4A or p14ARF partially rescued LCLs from EBNA3C, and in vitro, EBV latency III infection converts B cells into proliferating lymphoblast cell lines (LCLs) (2, 3

  18. MULTIWAVELENGTH OBSERVATIONS OF 3C 454.3. II. THE AGILE 2007 DECEMBER CAMPAIGN

    SciTech Connect (OSTI)

    Donnarumma, I.; Pucella, G.; Vittorini, V.; D'Ammando, F.; Tavani, M. [INAF/IASF-Rome, Via del Fosso del Cavaliere 100, I-00133 Rome (Italy); Vercellone, S. [INAF/IASF Palermo Via Ugo La Malfa 153, 90146 Palermo (Italy); Raiteri, C. M.; Villata, M.; Smart, R. L. [INAF/OATo, Via Osservatorio 20, I-10025 Pino Torinese (Italy); Perri, M. [ASI-ASDC, Via G. Galilei, I-00044 Frascati (Rome) (Italy); Chen, W. P. [Institute of Astronomy, National Central University, Taiwan (China); Kataoka, J.; Kawai, N.; Mori, Y. [Department of Physics, Tokyo Institute of Technology, Tokyo (Japan); Tosti, G.; Impiombato, D. [Dip. di Fisica, Univ. di Perugia, Via Pascoli, I-06123 Perugia (Italy); Takahashi, T.; Sato, R. [ISAS/JAXA, 3-1-1 Yoshinodai, Sagamihara, Kanagawa 229-8510 (Japan); Bulgarelli, A. [INAF/IASF-Bologna, Via Gobetti 101, I-40129 Bologna (Italy); Chen, A. W., E-mail: immacolata.donnarumma@iasf-roma.inaf.i [INAF/IASF-Milano, Via E. Bassini 15, I-20133 Milan (Italy)

    2009-12-20T23:59:59.000Z

    We report on the second Astrorivelatore Gamma a Immagini Leggero (AGILE) multiwavelength campaign of the blazar 3C 454.3 during the first half of 2007 December. This campaign involved AGILE, Spitzer, Swift, Suzaku, the Whole Earth Blazar Telescope (WEBT) consortium, the Rapid Eye Mount (REM), and the Multicolor Imaging Telescopes for Survey and Monstrous Explosions (MITSuME) telescopes, offering a broadband coverage that allowed for a simultaneous sampling of the synchrotron and inverse Compton (IC) emissions. The two-week AGILE monitoring was accompanied by radio to optical monitoring by WEBT and REM, and by sparse observations in mid-infrared and soft/hard X-ray energy bands performed by means of Target of Opportunity observations by Spitzer, Swift, and Suzaku, respectively. The source was detected with an average flux of approx250 x 10{sup -8} photons cm{sup -2} s{sup -1} above 100 MeV, typical of its flaring states. The simultaneous optical and gamma-ray monitoring allowed us to study the time lag associated with the variability in the two energy bands, resulting in a possible approx

  19. Representation of the Solar Capacity Value in the ReEDS Capacity Expansion Model: Preprint

    SciTech Connect (OSTI)

    Sigrin, B.; Sullivan, P.; Ibanez, E.; Margolis, R.

    2014-08-01T23:59:59.000Z

    An important emerging issue is the estimation of renewables' contributions to reliably meeting system demand, or their capacity value. While the capacity value of thermal generation can be estimated easily, assessment of wind and solar requires a more nuanced approach due to resource variability. Reliability-based methods, particularly, effective load-carrying capacity (ELCC), are considered to be the most robust techniques for addressing this resource variability. The Regional Energy Deployment System (ReEDS) capacity expansion model and other long-term electricity capacity planning models require an approach to estimating CV for generalized PV and system configurations with low computational and data requirements. In this paper we validate treatment of solar photovoltaic (PV) capacity value by ReEDS capacity expansion model by comparing model results to literature for a range of energy penetration levels. Results from the ReEDS model are found to compare well with both comparisons--despite not being resolved at an hourly scale.

  20. Photovoltaics effective capacity: Interim final report 2

    SciTech Connect (OSTI)

    Perez, R.; Seals, R. [State Univ. of New York, Albany, NY (United States). Atmospheric Sciences Research Center

    1997-11-01T23:59:59.000Z

    The authors provide solid evidence, based on more than 8 million data points, that regional photovoltaic (PV) effective capacity is largely unrelated to the region`s solar resource. They confirm, however, that effective capacity is strongly related to load-shape characteristics. The load-shape effective-capacity relationship appears to be valid for end-use loads as small as 100 kW, except possibly in the case of electrically heated buildings. This relationship was used as a tool to produce a US map of PV`s effective capacity. The regions of highest effective capacities include (1) the central US from the northern Great Plains to the metropolitan areas of Chicago and Detroit, down to the lower Mississippi Valley, (2) California and western Arizona, and (3) the northeast metropolitan corridor. The features of this map are considerably different from the traditional solar resource maps. They tend to reflect the socio-economic and climatic factors that indirectly drive PV`s effective capacity: e.g., commercial air-conditioning, little use of electric heat, and strong summer heat waves. The map provides a new and significant insight to a comprehensive valuation of the PV resource. The authors assembled preliminary evidence showing that end-use load type may be related to PV`s effective capacity. Highest effective capacities were found for (nonelectrically heated) office buildings, followed by hospitals. Lowest capacities were found for airports and residences. Many more data points are needed, however, to ascertain and characterize these preliminary findings.

  1. Load controller and method to enhance effective capacity of a photovotaic power supply using a dynamically determined expected peak loading

    DOE Patents [OSTI]

    Perez, Richard (Delmar, NY)

    2003-04-01T23:59:59.000Z

    A load controller and method are provided for maximizing effective capacity of a non-controllable, renewable power supply coupled to a variable electrical load also coupled to a conventional power grid. Effective capacity is enhanced by monitoring power output of the renewable supply and loading, and comparing the loading against the power output and a load adjustment threshold determined from an expected peak loading. A value for a load adjustment parameter is calculated by subtracting the renewable supply output and the load adjustment parameter from the current load. This value is then employed to control the variable load in an amount proportional to the value of the load control parameter when the parameter is within a predefined range. By so controlling the load, the effective capacity of the non-controllable, renewable power supply is increased without any attempt at operational feedback control of the renewable supply. The expected peak loading of the variable load can be dynamically determined within a defined time interval with reference to variations in the variable load.

  2. Feedback Capacity of the Compound Channel

    E-Print Network [OSTI]

    Shrader, Brooke E.

    In this work, we find the capacity of a compound finite-state channel (FSC) with time-invariant deterministic feedback. We consider the use of fixed length block codes over the compound channel. Our achievability result ...

  3. Inventories and capacity utilization in general equilibrium

    E-Print Network [OSTI]

    Trupkin, Danilo Rogelio

    2009-05-15T23:59:59.000Z

    The primary goal of this dissertation is to gain a better understanding, in thecontext of a dynamic stochastic general equilibrium framework, of the role of inventories and capacity utilization (of both capital and labor) and, in particular...

  4. Expandability, reversibility, and optimal capacity choice

    E-Print Network [OSTI]

    Dixit, Avinash K.

    1997-01-01T23:59:59.000Z

    We develop continuous-time models of capacity choice when demand fluctuates stochastically, and the firm's opportunities to expand or contract are limited. Specifically, we consider costs of investing or disinvesting that ...

  5. Developing High Capacity, Long Life Anodes

    Broader source: Energy.gov (indexed) [DOE]

    more than 1000 mAhg with poor cyleability. * The formation of Sn x Co y C z and MO composite could lead to the increase in the capacity, reduce the amount of cobalt in the...

  6. California: Conducting Polymer Binder Boosts Storage Capacity...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - 10:17am Addthis Working with Nextval, Inc., Lawrence Berkeley National Laboratory (LBNL) developed a Conducting Polymer Binder for high-capacity lithium-ion batteries. With a...

  7. Capacity Building Project with Howard University

    Broader source: Energy.gov [DOE]

    The purpose of this initiative is to build community capacity for public participation in environmental and energy decision making. The target communities are those impacted by U.S. Department of...

  8. Measuring the capacity impacts of demand response

    SciTech Connect (OSTI)

    Earle, Robert; Kahn, Edward P.; Macan, Edo

    2009-07-15T23:59:59.000Z

    Critical peak pricing and peak time rebate programs offer benefits by increasing system reliability, and therefore, reducing capacity needs of the electric power system. These benefits, however, decrease substantially as the size of the programs grows relative to the system size. More flexible schemes for deployment of demand response can help address the decreasing returns to scale in capacity value, but more flexible demand response has decreasing returns to scale as well. (author)

  9. Discovery of TeV gamma-ray emission from the Pulsar Wind Nebula 3C 58 by MAGIC

    E-Print Network [OSTI]

    Bigas, O Blanch; Carmona, E; Pérez-Torres, M A

    2015-01-01T23:59:59.000Z

    The Pulsar Wind Nebula (PWN) 3C 58 is energized by one of the highest spin-down power pulsars known (5% of Crab pulsar) and it has been compared to the Crab Nebula due to their morphological similarities. This object was detected by Fermi-LAT with a spectrum extending beyond 100 GeV. We analyzed 81 hours of 3C 58 data taken with the MAGIC telescopes and we detected VHE gamma-ray emission for the first time at TeV energies with a significance of 5.7 sigma and an integral flux of 0.65% C.U. above 1 TeV. The differential energy spectrum between 400 GeV and 10 TeV is well described by a power-law function $d\\Phi/dE=f_{o}(E/1TeV)^{-\\Gamma}$ with $f_{o}=(2.0\\pm0.4stat\\pm0.6sys) 10^{-13}cm^{-2}s^{-1}TeV^{-1}$ and $\\Gamma=2.4\\pm0.2sta\\pm0.2sys$. This leads 3C 58 to be the least luminous PWN ever detected at VHE and the one with the lowest flux at VHE to date. According to time-dependent models in which electrons up-scatter photon fields, the best representation favors a distance to the PWN of 2 kpc and FIR comparable...

  10. Implications for Damage Recognition during Dpo4-Mediated Mutagenic Bypass of m1G and m3C Lesions

    SciTech Connect (OSTI)

    Rechkoblit, Olga; Delaney, James C.; Essigmann, John M.; Patel, Dinshaw J. (MIT); (MSKCC)

    2012-05-08T23:59:59.000Z

    DNA is susceptible to alkylation damage by a number of environmental agents that modify the Watson-Crick edge of the bases. Such lesions, if not repaired, may be bypassed by Y-family DNA polymerases. The bypass polymerase Dpo4 is strongly inhibited by 1-methylguanine (m1G) and 3-methylcytosine (m3C), with nucleotide incorporation opposite these lesions being predominantly mutagenic. Further, extension after insertion of both correct and incorrect bases, introduces additional base substitution and deletion errors. Crystal structures of the Dpo4 ternary extension complexes with correct and mismatched 3'-terminal primer bases opposite the lesions reveal that both m1G and m3C remain positioned within the DNA template/primer helix. However, both correct and incorrect pairing partners exhibit pronounced primer terminal nucleotide distortion, being primarily evicted from the DNA helix when opposite m1G or misaligned when pairing with m3C. Our studies provide insights into mechanisms related to hindered and mutagenic bypass of methylated lesions and models associated with damage recognition by repair demethylases.

  11. GLOBAL GLACIAL ISOSTATIC ADJUSTMENT: TARGET FIELDS FOR SPACE GEODESY

    E-Print Network [OSTI]

    Peltier, W. Richard

    GLOBAL GLACIAL ISOSTATIC ADJUSTMENT: TARGET FIELDS FOR SPACE GEODESY W.R. Peltier Department of Physics, University of Toronto, Toronto, Ontario, Canada M5S-1A7 peltier) and Sabadini and Peltier (1981) whose analysis was based upon the application of a homogeneous viscoelastic

  12. Respiratory and Cardiovascular Adjustments to Exercise in Reptiles

    E-Print Network [OSTI]

    Bennett, Albert F.

    challenges to the respiratory system of reptiles. Incrementing aerobic metabolism above resting levelsRespiratory and Cardiovascular Adjustments to Exercise in Reptiles T.T. GLEESON ' and A.F. BEN NETT all levels of activity (Fig. lb). The mechanism for an- aerobic energy production during exercise

  13. Sensitivity of health risk estimates to air quality adjustment procedure

    SciTech Connect (OSTI)

    Whitfield, R.G.

    1997-06-30T23:59:59.000Z

    This letter is a summary of risk results associated with exposure estimates using two-parameter Weibull and quadratic air quality adjustment procedures (AQAPs). New exposure estimates were developed for children and child-occurrences, six urban areas, and five alternative air quality scenarios. In all cases, the Weibull and quadratic results are compared to previous results, which are based on a proportional AQAP.

  14. Estimation in Covariate Adjusted Regression Damla Senturk1

    E-Print Network [OSTI]

    Sentürk, Damla

    confounder in a multiplicative fashion. One example is data collected for a study on diabetes, where adjusted for the effects of the confounders. One example is data collected for a study on diabetes (Willems for diabetes, including cholesterol and hypertension, and diagnostic variables, such as glycosolated hemoglobin

  15. Saving Energy by Adjusting Transmission Power in Wireless Sensor Networks

    E-Print Network [OSTI]

    Rowe, Neil C.

    Saving Energy by Adjusting Transmission Power in Wireless Sensor Networks Xiao Chen Department and communication areas. Energy-efficient communication is an important issue in WSNs because of the limited power propose methods to reduce communication energy by minimizing the total sensor trans- mission power

  16. On Adjusting Power to Defend Wireless Networks from Jamming

    E-Print Network [OSTI]

    Xu, Wenyuan

    1 On Adjusting Power to Defend Wireless Networks from Jamming Wenyuan Xu Department of Computer}@engr.sc.edu Abstract-- Wireless networks are susceptible to accidental or intentional radio interference. One way, we turn to examining the more complicated scenario consisting of a multi- hop wireless network. We

  17. Ihsan Yaniko No. 2013-022 ADJUSTABLE ROBUST PARAMETER ...

    E-Print Network [OSTI]

    BruijnC

    2013-03-21T23:59:59.000Z

    Mar 21, 2013 ... The goal of many experiments is to estimate the best solution for a ... Output may be univariate (a single or scalar response) or multivariate ... second type of inputs is not controlled by the users; e.g., demand in an inventory system. ...... practice, a part of the controllable factors can often be adjusted after ...

  18. OPERATIONAL BUDGET ADJUSTMENTS: FOCUSING RESOURCES TO 2016 AND BEYOND

    E-Print Network [OSTI]

    Saskatchewan, University of

    OPERATIONAL BUDGET ADJUSTMENTS: FOCUSING RESOURCES TO 2016 AND BEYOND EMMA LAKE KENDERDINE CAMPUS. This decision, while difficult, was necessary in a time of budget restraint. In addition to saving budget, in 2008 the Provost's Committee on Integrated Planning (PCIP) began providing an annual

  19. Bias adjustment of radar-based 3-hour precipitation accumulations

    E-Print Network [OSTI]

    Stoffelen, Ad

    projection of KNMI radar images 55 4 #12;Chapter 1 Introduction Since June 2003 a daily gauge is generated at 1400 UTC when the majority of the manual gauge observations have been reported. The radar-gaugeBias adjustment of radar-based 3-hour precipitation accumulations Iwan Holleman Technical Report

  20. Movement Planning and Simulation for Attitude Adjustment of a Drilling Robot

    E-Print Network [OSTI]

    Movement Planning and Simulation for Attitude Adjustment of a Drilling Robot Chengkun Wang planning method for attitude adjustment of a drilling robot is presented in this paper. The double eccentric discs normal adjustment mechanism is used in the robot to adjust the attitude of the drill axis

  1. Data:949a6bb8-ee3c-4eb2-ae13-fad40000eaef | Open Energy Information

    Open Energy Info (EERE)

    1 1 1 1 1 1 1 1 Dec 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Comments Energy Optimization: .001780 added onto adjustments. kWh << Previous 1 2 3 Next >>...

  2. High-capacity hydrogen storage in lithium and sodium amidoboranes...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    capacity hydrogen storage in lithium and sodium amidoboranes. High-capacity hydrogen storage in lithium and sodium amidoboranes. Abstract: A substantial effort worldwide has been...

  3. Solid-State Hydrogen Storage: Storage Capacity,Thermodynamics...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hydrogen Storage: Storage Capacity,Thermodynamics and Kinetics. Solid-State Hydrogen Storage: Storage Capacity,Thermodynamics and Kinetics. Abstract: Solid-state reversible...

  4. Is there life in other markets? BPA explores preschedule capacity

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    can diminish the federal hydropower system's capacity to balance supply and demand for power. The process allowed BPA to explore an untested capacity market this spring to acquire...

  5. Modeling-Thermo-electrochemistry, Capacity Degradation and Mechanics...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Modeling-Thermo-electrochemistry, Capacity Degradation and Mechanics with SEI Layer Modeling-Thermo-electrochemistry, Capacity Degradation and Mechanics with SEI Layer 2011 DOE...

  6. RULES FOR CONGESTION MANAGEMENT EVALUATION OF AVAILABILITY OF CAPACITY AND

    E-Print Network [OSTI]

    RULES FOR CONGESTION MANAGEMENT EVALUATION OF AVAILABILITY OF CAPACITY AND POSSIBILITIES.............................................................12 4.4 Available trading capacity in the market

  7. HT Combinatorial Screening of Novel Materials for High Capacity...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    HT Combinatorial Screening of Novel Materials for High Capacity Hydrogen Storage HT Combinatorial Screening of Novel Materials for High Capacity Hydrogen Storage Presentation for...

  8. Expansion of Novolyte Capacity for Lithium Ion Electrolyte Production...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    15eswise2012p.pdf More Documents & Publications Expansion of Novolyte Capacity for Lithium Ion Electrolyte Production Expansion of Novolyte Capacity for Lithium Ion Electrolyte...

  9. Expansion of Novolyte Capacity for Lithium Ion Electrolyte Production...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    15eswise2011p.pdf More Documents & Publications Expansion of Novolyte Capacity for Lithium Ion Electrolyte Production Expansion of Novolyte Capacity for Lithium Ion Electrolyte...

  10. Employee-Driven Initiative Increases Treatment Capacity, Reduces...

    Energy Savers [EERE]

    Employee-Driven Initiative Increases Treatment Capacity, Reduces Clean Water Demands Employee-Driven Initiative Increases Treatment Capacity, Reduces Clean Water Demands June 30,...

  11. Assessment of the Adequacy of Natural Gas Pipeline Capacity in...

    Office of Environmental Management (EM)

    Assessment of the Adequacy of Natural Gas Pipeline Capacity in the Northeast United States - November 2013 Assessment of the Adequacy of Natural Gas Pipeline Capacity in the...

  12. Representation of Solar Capacity Value in the ReEDS Capacity Expansion Model

    SciTech Connect (OSTI)

    Sigrin, B.; Sullivan, P.; Ibanez, E.; Margolis, R.

    2014-03-01T23:59:59.000Z

    An important issue for electricity system operators is the estimation of renewables' capacity contributions to reliably meeting system demand, or their capacity value. While the capacity value of thermal generation can be estimated easily, assessment of wind and solar requires a more nuanced approach due to the resource variability. Reliability-based methods, particularly assessment of the Effective Load-Carrying Capacity, are considered to be the most robust and widely-accepted techniques for addressing this resource variability. This report compares estimates of solar PV capacity value by the Regional Energy Deployment System (ReEDS) capacity expansion model against two sources. The first comparison is against values published by utilities or other entities for known electrical systems at existing solar penetration levels. The second comparison is against a time-series ELCC simulation tool for high renewable penetration scenarios in the Western Interconnection. Results from the ReEDS model are found to compare well with both comparisons, despite being resolved at a super-hourly temporal resolution. Two results are relevant for other capacity-based models that use a super-hourly resolution to model solar capacity value. First, solar capacity value should not be parameterized as a static value, but must decay with increasing penetration. This is because -- for an afternoon-peaking system -- as solar penetration increases, the system's peak net load shifts to later in the day -- when solar output is lower. Second, long-term planning models should determine system adequacy requirements in each time period in order to approximate LOLP calculations. Within the ReEDS model we resolve these issues by using a capacity value estimate that varies by time-slice. Within each time period the net load and shadow price on ReEDS's planning reserve constraint signals the relative importance of additional firm capacity.

  13. DOE mixed waste treatment capacity analysis

    SciTech Connect (OSTI)

    Ross, W.A.; Wehrman, R.R.; Young, J.R.; Shaver, S.R.

    1994-06-01T23:59:59.000Z

    This initial DOE-wide analysis compares the reported national capacity for treatment of mixed wastes with the calculated need for treatment capacity based on both a full treatment of mixed low-level and transuranic wastes to the Land Disposal Restrictions and on treatment of transuranic wastes to the WIPP waste acceptance criteria. The status of treatment capacity is reported based on a fifty-element matrix of radiation-handling requirements and functional treatment technology categories. The report defines the classifications for the assessment, describes the models used for the calculations, provides results from the analysis, and includes appendices of the waste treatment facilities data and the waste stream data used in the analysis.

  14. Heat capacity at the glass transition

    E-Print Network [OSTI]

    Kostya Trachenko; Vadim Brazhkin

    2010-07-13T23:59:59.000Z

    A fundamental problem of glass transition is to explain the jump of heat capacity at the glass transition temperature $T_g$ without asserting the existence of a distinct solid glass phase. This problem is also common to other disordered systems, including spin glasses. We propose that if $T_g$ is defined as the temperature at which the liquid stops relaxing at the experimental time scale, the jump of heat capacity at $T_g$ follows as a necessary consequence due to the change of system's elastic, vibrational and thermal properties. In this picture, we discuss time-dependent effects of glass transition, and identify three distinct regimes of relaxation. Our approach explains widely observed logarithmic increase of $T_g$ with the quench rate and the correlation of heat capacity jump with liquid fragility.

  15. A study of freeway capacity in Texas

    E-Print Network [OSTI]

    Ringert, John Franklin

    1992-01-01T23:59:59.000Z

    studies have been undertaken to determine the value of capacity. A study by Hurdle and Datta in 1983 concluded that the value of 2, 000 pcphpl was still a good estimate of capacity (5). In contrast, a study by Agyemang-Duah (6) concluded...). Many other studies have attempted to measure the flows in both conditions and have produced varying results. Another related issue is the requirement for the existence of sufficient demand which is highlighted by McShane and Roess (13). Agyemang-Duah...

  16. A Shell of Thermal X-ray Emission Associated with the Young Crab-like Remnant 3C58

    E-Print Network [OSTI]

    E. V. Gotthelf; D. J. Helfand; L. Newburgh

    2006-09-12T23:59:59.000Z

    Deep X-ray imaging spectroscopy of the bright pulsar wind nebula 3C58 confirms the existence of an embedded thermal X-ray shell surrounding the pulsar PSR J0205+6449. Radially resolved spectra obtained with the XMM-Newton telescope are well-characterized by a power-law model with the addition of a soft thermal emission component in varying proportions. These fits reproduce the well-studied increase in the spectral index with radius attributed to synchrotron burn-off of high energy electrons. Most interestingly, a radially resolved thermal component is shown to map out a shell-like structure ~6' in diameter. The presence of a strong emission line corresponding to the Ne IX He-like transition requires an overabundance of ~3 x [Ne/Ne(sun)] in the Raymond-Smith plasma model. The best-fit temperature kT ~ 0.23 keV is essentially independent of radius for the derived column density of N_H = (4.2 +/- 0.1)E21 per cm squared. Our result suggests that thermal shells can be obscured in the early evolution of a supernova remnant by non-thermal pulsar wind nebulae emission; the luminosity of the 3C58 shell is more than an order of magnitude below the upper limit on a similar shell in the Crab Nebula. We find the shell centroid to be offset from the pulsar location. If this neutron star has a velocity similar to that of the Crab pulsar, we derive an age of 3700 yr and a velocity vector aligned with the long axis of the PWN. The shell parameters and pulsar offset add to the accumulating evidence that 3C58 is not the remnant of the supernova of CE 1181.

  17. THE INFLUENCE OF NEUTRON-IRRADIATION AT LOW TEMPERATURES ON THE DIELECTRIC PARAMETERS OF 3C-SiC

    SciTech Connect (OSTI)

    J.A.A. Engelbrecht; G. Deyzel; E. Minnaar; W.E. Goosen; I. J. van Rooyen

    2014-04-01T23:59:59.000Z

    3C-SiC wafers were irradiated with neutrons of various fluences and at low (200 - 400 ?C) irradiation temperatures. Fourier Transform infrared (FTIR) reflectance spectra were obtained for the samples, and the spectra used to extract the dielectric parameters for each specimen, using statistical curve-fitting procedures. Analysis of all data revealed trends in reflectance peak heights as well as in the dielectric parameters. The surface roughness of the irradiated samples was measured by atomic force spectroscopy (AFM) and certain trends could be ascribed to surface roughness.

  18. Fe Emission And Ionized Excess Absorption in the Luminous Quasar 3C109 With XMM-Newton

    SciTech Connect (OSTI)

    Miniutti, Giovanni; /Cambridge U., Inst. of Astron.; Ballantyne, D.R.; /Arizona U.; Allen, S.W.; /KIPAC, Menlo Park; Fabian, A.C.; /Cambridge U., Inst. of Astron.; Ross,; /Holy Cross Coll.

    2006-06-09T23:59:59.000Z

    We report results from an XMM-Newton observation of the broad-line radio galaxy 3C 109 (z=0.3056). Previous ASCA data revealed the presence of a broad iron line from the accretion disc with which the XMM-Newton spectrum is fully consistent. However, although improving the ASCA constraints on the line parameters, the quality of the data is not high enough to distinguish between an untruncated accretion disc extending down to small radii close to the black hole and a scenario in which the innermost 20-30 gravitational radii are missing. For this reason, our results are model-dependent and the hard data can be modeled equally well by considering an absorption scenario in which a large column of neutral gas partially covers the X-ray continuum source. However, the absorber would have to comprise hundreds/thousands very compact clouds close to the X-ray source, which seems rather extreme a requirement. The 2-10 keV intrinsic luminosity of 3C 109 is of the order of 2-3 x 10{sup 45} erg s{sup -1} regardless of the adopted model. A recent black hole mass estimate of {approx} 2 x 10{sup 8} M{sub {circle_dot}} implies that L{sub bol}/L{sub Edd} > 1. If partial covering is excluded, the observed reflection fraction (of the order of unity), steep photon index (1.86), and Fe line equivalent width (about 100 eV) all suggest to exclude that the X-ray continuum is strongly beamed indicating that the large Eddington ratio is associated with a radiatively efficient accretion process and making it unlikely that the innermost accretion disc is replaced by a thick radiatively inefficient medium such as in advection-dominated accretion models. We also confirm previous findings on the detection of low energy absorption in excess of the Galactic value, where we find excellent agreement with previous results obtained in X-rays and at other wavelengths (optical and infrared). The better quality of the XMM-Newton data enables us to attribute the excess absorption to slightly ionized gas in the line of sight, located at the redshift of 3C 109. The most likely interpretation for the excess absorption is that the line-of-sight is grazing the obscuring torus of unified models, which is consistent with the inclination inferred from the Fe line profile (about 40{sup o}) and with the hybrid radio-galaxy/quasar nature of 3C 109.

  19. Adjustable Speed AC Motor Drives-Applications Problems

    E-Print Network [OSTI]

    Enjeti, P.

    Adjustable Speed AC Motor Drives Applications Problems by Dr. P. Enjeti Power Quality Laboratory Department ofElectrical Engineering Texas A&M University College Station, TX 77843 Tel: 409-845-7466 Fax: 409-845-6259 Email..., it generates side effects, some which have been recognized only recently. This paper presents a comprehensive coverage of application issues of PWM inverter controlled ac motor drives which include damage to motor insulation due to reflected voltages caused...

  20. STATE OF CALIFORNIA MAXIMUM RATED TOTAL COOLING CAPACITY

    E-Print Network [OSTI]

    that the installed space conditioning system must have a cooling capacity rating at ARI conditions that is equal Total Cooling Capacity of the installed system (Btu/hr) 3b Sum of the ARI Rated Total Cooling Capacities, then the sum of ARI Rated Cooling Capacities of the installed cooling systems must be calculated and entered

  1. TURKEY'S CIVILIAN CAPACITY IN POST-CONFLICT RECONSTRUCTION

    E-Print Network [OSTI]

    Yanikoglu, Berrin

    TURKEY'S CIVILIAN CAPACITY IN POST-CONFLICT RECONSTRUCTION 1 TURKEY'S CIVILIAN CAPACITY IN POST-CONFLICT RECONSTRUCTION by Teri Murphy & Onur Sazak #12;Turkey's Civilian Capacity in post-Conflict Reconstruction By Teri-checking was indispensable for the realization of this project. #12;TURKEY'S CIVILIAN CAPACITY IN POST

  2. PROJECT REPORT HVAC EQUIPMENT DEMOGRAPHICS AND CAPACITY

    E-Print Network [OSTI]

    California at Davis, University of

    - nently reduce the connected capacity, with respect to the HVAC system, by disconnecting compressors within RTUs that contain multiple compressors. We reviewed existing literature and col- lected primary data by conducting field surveys in order to estab- lish how multiple compressor RTUs are typically

  3. Electricity market module: Electricity capacity planning submodule

    SciTech Connect (OSTI)

    NONE

    1996-06-01T23:59:59.000Z

    The purpose of this report is to describe modifications to the Electricity Capacity Planning Submodule (ECP) for the Annual Energy Outlook 1996. It describes revisions to enhance the representation of planned maintenance, incorporate technological improvements in operating efficiencies, revise the algorithm for determining international firm power imports, and include risk premiums for new plant construction.

  4. Multivariable controller increased MTBE complex capacity

    SciTech Connect (OSTI)

    Robertson, D.; Peterson, T.J.; O`Connor, D. [DMC Corp., Houston, TX (United States); Payne, D.; Adams, V. [Valero Refining Co., Corpus Christi, TX (United States)

    1997-03-01T23:59:59.000Z

    Capacity increased by more than 4.6% when one dynamic matrix multivariable controller began operating in Valero Refining Company`s MTBE production complex in Corpus Christi, Texas. This was on a plant that was already running well above design capacity due to previously made process changes. A single controller was developed to cover an isobutane dehydrogenation (ID) unit and an MTBE reaction and fractionation plant with the intermediate isobutylene surge drum. The overall benefit is realized by a comprehensive constrained multivariable predictive controller that properly handles all sets of limits experienced by the complex, whether limited by the front-end ID or back-end MTBE units. The controller has 20 manipulated, 6 disturbance and 44 controlled variables, and covers widely varying dynamics with settling times ranging from twenty minutes to six hours. The controller executes each minute with a six hour time horizon. A unique achievement is intelligent surge drum level handling by the controller for higher average daily complex capacity as a whole. The ID unit often operates at simultaneous limits on reactor effluent compressor capacity, cold box temperature and hydrogen/hydrocarbon ratio, and the MTBE unit at impurity in butene column overhead as well as impurity in MTBE product. The paper discusses ether production, isobutane dehydrogenation, maximizing production, controller design, and controller performance.

  5. STORAGE CAPACITY ALLOCATION ALGORITHMS FOR HIERARCHICAL

    E-Print Network [OSTI]

    Stavrakakis, Ioannis

    STORAGE CAPACITY ALLOCATION ALGORITHMS FOR HIERARCHICAL CONTENT DISTRIBUTION Nikolaos Laoutaris of Athens, 15784 Athens, Greece {laoutaris,vassilis,istavrak}@di.uoa.gr Abstract The addition of storage storage budget to the nodes of a hierarchical con- tent distribution system is formulated; optimal

  6. CSEM WP 124 Capacity Markets for Electricity

    E-Print Network [OSTI]

    California at Berkeley. University of

    CSEM WP 124 Capacity Markets for Electricity Anna Creti, LEEERNA, University of Toulouse for Electricity Anna Creti LEEERNA, University of Toulouse Natalia Fabra Universidad Carlos III de Madrid February 2004 Abstract The creation of electricity markets has raised the fundamental question as to whether

  7. Kampung Capacity Local Solutions for Sustainable

    E-Print Network [OSTI]

    Kammen, Daniel M.

    Kampung Capacity Local Solutions for Sustainable Rural Energy in the Baram River Basin, Sarawak and social opportunities of up to 1.5 billion people worldwide. As a critical case in point, most rural of service provision based on large-scale regional electrification. A range of different renewable energy

  8. Capacity Building in Wind Energy for PICs

    E-Print Network [OSTI]

    indicates that significant wind energy potential exists. · A monitoring project showed that in Rarotonga system. · About 30 other islands could have potential for grid connected wind turbines in the 100-1000 k1 Capacity Building in Wind Energy for PICs Presentation of the project Regional Workshop Suva

  9. Constrained capacity of MIMO Rayleigh fading channels

    E-Print Network [OSTI]

    He, Wenyan

    2011-08-08T23:59:59.000Z

    In this thesis channel capacity of a special type of multiple-input multiple-output (MIMO) Rayleigh fading channels is studied, where the transmitters are subject to a finite phase-shift keying (PSK) input alphabet. The constraint on the input...

  10. Designing, implementing and monitoring social impact mitigation strategies: Lessons from Forest Industry Structural Adjustment Packages

    SciTech Connect (OSTI)

    Loxton, Edwina A., E-mail: Edwina.Loxton@anu.edu.au [Fenner School of Environment and Society, The Australian National University, Canberra, 0200 (Australia); Schirmer, Jacki, E-mail: Jacki.Schirmer@canberra.edu.au [Fenner School of Environment and Society, The Australian National University, Canberra, 0200 (Australia) [Fenner School of Environment and Society, The Australian National University, Canberra, 0200 (Australia); Cooperative Research Centre for Forestry, Hobart, 7001 (Australia); Kanowski, Peter, E-mail: P.Kanowski@cgiar.org [Fenner School of Environment and Society, The Australian National University, Canberra, 0200 (Australia) [Fenner School of Environment and Society, The Australian National University, Canberra, 0200 (Australia); Cooperative Research Centre for Forestry, Hobart, 7001 (Australia)

    2013-09-15T23:59:59.000Z

    Social impact mitigation strategies are implemented by the proponents of policies and projects with the intent of reducing the negative, and increasing the positive social impacts of their activities, and facilitating the achievement of policy/project goals. Evaluation of mitigation strategies is critical to improving their future success and cost-effectiveness. This paper evaluates two Forest Industry Structural Adjustment Packages (FISAP) implemented in Australia in the 1990s to 2000s as part of broader policy changes that reduced access to timber from publicly owned native forests. It assesses the effectiveness of the structure, design, implementation and monitoring of the FISAPs, and highlights the interactions between these four elements and their influence on social impacts. The two FISAPs were found to be effective in terms of reducing negative impacts, encouraging positive impacts and contributing towards policy goals, although they did not mitigate negative impacts in all cases, and sometimes interacted with external factors and additional policy changes to contribute to significant short and long term negative impacts. -- Highlights: ? Mitigation strategies aim to reduce negative and enhance positive social impacts ? Mitigation strategy design, implementation, and monitoring are critical to success ? Effective mitigation enhanced the capacity of recipients to respond to change ? Mitigation strategies influenced multiple interacting positive and negative impacts ? Success required good communication, transparency, support, resources and timing.

  11. Tiny scale opacity fluctuations from VLBA, MERLIN and VLA observations of HI absorption toward 3C 138

    E-Print Network [OSTI]

    Roy, Nirupam; Goss, W M; Brogan, Crystal L; Lazio, T J W

    2012-01-01T23:59:59.000Z

    The structure function of opacity fluctuations is a useful statistical tool to study tiny scale structures of neutral hydrogen. Here we present high resolution observation of HI absorption towards 3C 138, and estimate the structure function of opacity fluctuations from the combined VLA, MERLIN and VLBA data. The angular scales probed in this work are ~ 10-200 milliarcsec (about 5-100 AU). The structure function in this range is found to be well represented by a power law S_tau(x) ~ x^{beta} with index beta ~ 0.33 +/- 0.07 corresponding to a power spectrum P_tau(U) ~ U^{-2.33}. This is slightly shallower than the earlier reported power law index of ~ 2.5-3.0 at ~ 1000 AU to few pc scales. The amplitude of the derived structure function is a factor of ~ 20-60 times higher than the extrapolated amplitude from observation of Cas A at larger scales. On the other hand, extrapolating the AU scale structure function for 3C 138 predicts the observed structure function for Cas A at the pc scale correctly. These results...

  12. A Chandra X-ray study of the mixed-morphology supernova remnant 3C400.2

    E-Print Network [OSTI]

    Broersen, Sjors

    2015-01-01T23:59:59.000Z

    We present an analysis of archival Chandra observations of the mixed-morphology remnant 3C400.2. We analysed spectra of different parts of the remnant to observe if the plasma properties provide hints on the origin of the mixed-morphology class. These remnants often show overionization, which is a sign of rapid cooling of the thermal plasma, and super-solar abundances of elements which is a sign of ejecta emission. Our analysis shows that the thermal emission of 3C400.2 can be well explained by a two component non-equilibrium ionization model, of which one component is underionized, has a high temperature ($kT \\approx 3.9$ keV) and super-solar abundances, while the other component has a much lower temperature ($kT \\approx 0.14$ keV), solar abundances and shows signs of overionization. The temperature structure, abundance values and density contrast between the different model components suggest that the hot component comes from ejecta plasma, while the cooler component has an interstellar matter origin. This ...

  13. Data:Fc626f7c-c16e-42e8-ad06-857acf951c3c | Open Energy Information

    Open Energy Info (EERE)

    to serve a new outdoor security light. POWER COST ADJUSTMENT: The Cooperative buys wholesale power from the Bonneville Power Administration (BPA) through the Pacific Northwest...

  14. Data:E70650df-5370-41fb-a364-699a373e3c1c | Open Energy Information

    Open Energy Info (EERE)

    to the Power Cost Adjustment Clause. Source or reference: http:psc.wi.govapps40tariffsviewfile.aspx?typeelectric&id6490 Source Parent: Comments Applicability Demand...

  15. Data:1f26a3c0-e101-402d-aa61-a38b67dbf165 | Open Energy Information

    Open Energy Info (EERE)

    date if known: Rate name: Residential service rate Sector: Residential Description: Power Cost Adjustment on all kWh + .003 Source or reference: http:www.citytrf.net...

  16. Data:4be113a0-4a3c-47c1-95f0-f3033c088b56 | Open Energy Information

    Open Energy Info (EERE)

    Transmission Cost Recovery Rider+ the Environmental Cost, Recovery Rider+ the Demand Side Management Cost Adjustment Factor +the Infrastructure Rider. 0.007562 0.002868 +...

  17. Data:3c5e5e45-0988-4c91-9cab-f4a7d1dcfdf9 | Open Energy Information

    Open Energy Info (EERE)

    consumers,public authorities,trusts and municipalities or single phase lines for pumping and incidental lighting service - Subject to Power cost adjustment, Tax...

  18. Data:21263577-1c3c-4ff6-8b41-754aa77547a5 | Open Energy Information

    Open Energy Info (EERE)

    Distribution Delivery Charge + Electric Supply Service Charge Adjustments Energy Optimization Surcharge + Power Supply Cost Recovery Factor kWh << Previous 1 2 3 Next >>...

  19. Maximum Network Lifetime in Wireless Sensor Networks with Adjustable Sensing Ranges

    E-Print Network [OSTI]

    Wu, Jie

    1 Maximum Network Lifetime in Wireless Sensor Networks with Adjustable Sensing Ranges Mihaela problem in wireless sensor networks with adjustable sensing range. Communication and sensing consume Wireless sensor networks (WSNs) constitute the foundation of a broad range of applications related

  20. Wyoming Underground Natural Gas Storage Capacity

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial602 1,397 125 Q 69 (MillionAdjustments (MillionYearYear Jan Feb162111,167

  1. Adjustable speed drives: Applications and R&D needs

    SciTech Connect (OSTI)

    Stefanovic, V.R.

    1995-09-01T23:59:59.000Z

    The largest opportunity for the growth of adjustable speed drives (ASDs) during the next 5-6 years is in pump, fan and compressor (PFC) applications where a constant, fixed speed operation is converted to adjustable speed in order to realize energy savings. Inverter supplied induction motors are and will continue to be predominately used in these applications. Over the long term (10-15 years), the greatest ASD growth is expected in large volume consumer applications: first in hybrid electric vehicles (EVs) and in residential heating, ventilation and air-conditioning (HVAC). Both induction and a variety of AC Permanent Magnet motors are expected to be the dominant technology in this new field. The traditional ASD applications in industries which require adjustable speed (such as machine tools, robotics, steel rolling, extruders, paper mill finishing lines, etc.) offer a relatively limited potential for above average ASD growth since most of these applications have already converted to electronic speed control. As a result, ASD growth in this sector will essentially track the growth of the corresponding industries. If realized, both short and long term ASD growth opportunities will result in significant advancements of ASD technology, which will then substantially affect all other, more fragmented, ASD applications. In fact, any single large volume ASD application will serve as a catalyst for improving ASD characteristics in all other ASD applications with the same voltage rating. ASD cost and reliability (defined in the context of application compatibility) are the two most important factors which will determine whether the ASD growth opportunities are realized. Conversely, any technological improvement which carries a cost increase will be restricted to niche applications, at best. Consequently, future R & D efforts should be directed to secure reduction in ASD cost and improvement in ASD reliability. A specific action plan is outlined in this report.

  2. Sonde Adjust Value-Added Product Technical Report

    SciTech Connect (OSTI)

    Troyan, D

    2012-01-09T23:59:59.000Z

    The Sonde Adjust (SONDEADJUST) value-added product (VAP) creates a file that includes all fields from original Atmospheric Radiation Measurement Climate Research Facility (ARM Facility) radiosonde files and contains several value-added fields that provide adjustments related to well-known humidity issues. SONDEADJUST produces data that correct documented biases in radiosonde humidity measurements. Previous efforts towards applying some of these corrections are available via the discontinued PI product sgpsondecorr1miloC1. Unique fields contained within this datastream include smoothed original relative humidity, dry bias corrected relative humidity, and final corrected relative humidity. The smoothed RH field refines the relative humidity from integers-the resolution of the instrument-to fractions of a percent. This profile is then used to calculate the dry bias corrected field. The final correction fixes the time-lag problem and uses the dry-bias field as input into the algorithm. In addition to dry bias, solar heating is another correction that is encompassed in the final corrected RH field. Output from SONDEADJUST differs from the previous RH-corrected datastreams in important ways. First, all three types of ARM radiosondes-Vaisala RS-80, RS-90, and RS-92-are corrected using dedicated procedures and/or parameters. Second, the output variables include all of those found in the original radiosonde file: dry bulb temperature, dewpoint temperature, wind speed, wind direction, eastward wind component, northward wind component, wind status (a Vaisala-produced field used in conjunction with the Loran system), ascent rate, and original relative humidity. Additional humidity fields are smoothed relative humidity, dry biased corrected relative humidity, final ambient relative humidity, and scaled adjusted relative humidity. Third, quality control (QC) flags of the fields from the original radiosonde datastream are brought into the SONDEADJUST output file. Additional QC variables are created for the new fields.

  3. Data:244966b1-7125-4237-ae9c-3afd6a3c7cd2 | Open Energy Information

    Open Energy Info (EERE)

    afd6a3c7cd2 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2....

  4. Calculations of Heat-Capacities of Adsorbates

    E-Print Network [OSTI]

    LAWRENCE, WR; Allen, Roland E.

    1976-01-01T23:59:59.000Z

    PHYSICAL REVIEW B VOLUME 14, NUMBER 7 1 OCTOBER 1976 Calculations of heat capacities of adsorbates W. R. Lawrence and R. E. Allen Department of Physics, Texas A& M University, College Station, Texas 77843 (Received 2 September 1975) The phonon... the substrate has a perfect (100) surface and the adsorbate goes down as a solid monolayer in registry with the substrate. The quasiharmonic approximation was used, and the results for Ne adsorbates were considerably different from those obtained...

  5. Engine control system having fuel-based adjustment

    DOE Patents [OSTI]

    Willi, Martin L. (Dunlap, IL); Fiveland, Scott B. (Metamora, IL); Montgomery, David T. (Edelstein, IL); Gong, Weidong (Dunlap, IL)

    2011-03-15T23:59:59.000Z

    A control system for an engine having a cylinder is disclosed having an engine valve configured to affect a fluid flow of the cylinder, an actuator configured to move the engine valve, and an in-cylinder sensor configured to generate a signal indicative of a characteristic of fuel entering the cylinder. The control system also has a controller in communication with the actuator and the sensor. The controller is configured to determine the characteristic of the fuel based on the signal and selectively regulate the actuator to adjust a timing of the engine valve based on the characteristic of the fuel.

  6. Kansas Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40 Building FloorspaceThousandWithdrawals0.0Decade Year-0Base7 3 2 1301Adjustments

  7. Kentucky Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40 Buildingto China (Million Cubic Feet) Kenai, AK LiquefiedCubicAdjustments

  8. Mississippi Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40 Buildingto China (Million Cubic Feet)Commercialper Thousand70 349252Adjustments

  9. Texas Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial ConsumersThousandCubicSeparation 7,559 8,762 10,130Adjustments

  10. Alabama Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National and Regional Data; Row: NAICS8) Distribution Category UC-950 Cost and Quality of Fuels forA 6 J 9 U B u o f l d w3,290 2,871Adjustments

  11. Alaska Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National and Regional Data; Row: NAICS8) Distribution Category UC-950 Cost and Quality of Fuels forA 6 J 9 U B uYear Jan Feb MarAdjustments

  12. Colorado Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40CoalLease(Billion2,128 2,469 2,321Spain (Million Cubic 1.Year Jan3,302Adjustments

  13. West Virginia Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial602 1,397 125 Q 69 (Million Cubic58 810Year Jan Feb39,28720 21Adjustments

  14. Wyoming Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial602 1,397 125 Q 69 (MillionAdjustments (Billion Cubic Feet) Wyoming Dry

  15. U.S. Shale Proved Reserves Adjustments (Billion Cubic Feet)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40 Buildingto17 34 44Year Jan Feb MarDecade Year-0 Year-1(Billion- -Adjustments

  16. Utah Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40 Buildingto17 34 44Year Jan Feb MarDecadeFour-Dimensional2009893 725Adjustments

  17. Oklahoma Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5 Tables July 1996 Energy Information Administration Office ofthroughYear Jan Feb Mar Apr May Jun Jul9Thousand CubicAdjustments (Billion

  18. Pennsylvania Dry Natural Gas Reserves Adjustments (Billion Cubic Feet)

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5 Tables July 1996 Energy Information Administration Office ofthroughYear Jan Feb Mar Apr MayYear Jan MonthlyCubic17 34 44Adjustments

  19. A kinematic wave theory of capacity drop

    E-Print Network [OSTI]

    Wen-Long Jin; Qi-Jian Gan; Jean-Patrick Lebacque

    2013-10-09T23:59:59.000Z

    Capacity drop at active bottlenecks is one of the most puzzling traffic phenomena, but a thorough understanding is practically important for designing variable speed limit and ramp metering strategies. In this study, we attempt to develop a simple model of capacity drop within the framework of kinematic wave theory based on the observation that capacity drop occurs when an upstream queue forms at an active bottleneck. In addition, we assume that the fundamental diagrams are continuous in steady states. This assumption is consistent with observations and can avoid unrealistic infinite characteristic wave speeds in discontinuous fundamental diagrams. A core component of the new model is an entropy condition defined by a discontinuous boundary flux function. For a lane-drop area, we demonstrate that the model is well-defined, and its Riemann problem can be uniquely solved. We theoretically discuss traffic stability with this model subject to perturbations in density, upstream demand, and downstream supply. We clarify that discontinuous flow-density relations, or so-called "discontinuous" fundamental diagrams, are caused by incomplete observations of traffic states. Theoretical results are consistent with observations in the literature and are verified by numerical simulations and empirical observations. We finally discuss potential applications and future studies.

  20. Infrared diode laser spectroscopy of jet-cooled NiCO, Ni,,CO...3,,13 and Ni,,CO...3,,C18

    E-Print Network [OSTI]

    Morse, Michael D.

    Infrared diode laser spectroscopy of jet-cooled NiCO, Ni,,CO...3,,13 CO..., and Ni,,CO...3,,C18 O infrared spectroscopic investigations of the CO vibration of jet-cooled NiCO, Ni CO 3 13 CO , and Ni CO 3 C diode laser spectrometer. The rotationally resolved spectrum of NiCO was collected as it was formed

  1. Growth of cubic GaN on nano-patterned 3C-SiC/Si (0 0 1) substrates R.M. Kemper n

    E-Print Network [OSTI]

    As, Donat Josef

    Growth of cubic GaN on nano-patterned 3C-SiC/Si (0 0 1) substrates R.M. Kemper n , M. Weinl, C matched nano- patterned substrates. In hexagonal GaN inherent spontaneous and piezoelectric polarization conditions to achieve heteroepitaxial growth of cubic GaN [8]. The most ade- quate substrate is 3C-SiC (0 0 1

  2. Phenomenology of the SU(3)_c X SU(3)_L X U(1)_X model with right-handed neutrinos

    E-Print Network [OSTI]

    Diego A. Gutierrez; William A. Ponce; Luis A. Sanchez

    2006-02-16T23:59:59.000Z

    A phenomenological analysis of the three-family local gauge group $SU(3)_c\\otimes SU(3)_L\\otimes U(1)_X$ with right-handed neutrinos is carried out. Instead of using the minimal scalar sector able to break the symmetry in a proper way, we introduce an alternative set of four Higgs scalar triplets, which combined with an anomaly-free discrete symmetry, produces a quark mass spectrum without hierarchies in the Yukawa coupling contants. We also embed the structure into a simple gauge group and show some conditions to achieve a low energy gauge coupling unification, avoiding possible conflict with proton decay bounds. By using experimental results from the CERN-LEP, SLAC linear collider and atomic parity violation data, we update constraints on several parameters of the model.

  3. A review of statistical methods for the meteorological adjustment of tropospheric ozone

    E-Print Network [OSTI]

    Washington at Seattle, University of

    A review of statistical methods for the meteorological adjustment of tropospheric ozone Mary Lou adjustment of tropospheric ozone Mary Lou Thompson1 Joel Reynolds1 Lawrence H. Cox2 Peter Guttorp1 Paul D.larry@epamail.epa.gov ABSTRACT: A variety of statistical methods for meteorological adjustment of ozone have been proposed

  4. Testing the photoionization models of powerful radio galaxies: Mixed line-emitting media in 3C 321

    E-Print Network [OSTI]

    T. G. Robinson; C. N. Tadhunter; D. J. Axon; A. Robinson

    2000-05-10T23:59:59.000Z

    The photoionization models for the narrow emission line regions of powerful radio galaxies have yet to be tested in depth. To this end, we present high-quality long-slit spectroscopy of the powerful double-nucleus radio galaxy 3C 321. The data have good enough spatial resolution to be able to trace the variation in emission-line properties on kpc scales. Continuum modelling and subtraction enables the faint emission line fluxes to be measured in several regions across the emission line nebula. We plot diagnostic line-ratio diagrams and compare them with the predictions of various photoionization models, finding that the data is best fit by models which assume a mixture of optically thin and thick clouds illuminated by a power-law continuum. The emission line kinematics, line ratios and deduced physical conditions show remarkably little variation across the source. We deduce a mean electron density of 400 +/- 120 cm-3 and a mean temperature of 11500 +/- 1500 K. Assuming a single population of optically thick line-emitting clouds, we calculate a mean photoionization parameter of (1.1 +/- 0.5) x 10e-2 and hence a photoionizing photon luminosity of Q ~ 10e55 -- 10e56 photon/s/sr. This indicates a central engine as luminous as that of the powerful quasar 3C 273, yet there is no evidence for such an energetically prolific central engine at either far-infrared or radio wavelengths. We therefore conclude that the mixed-media models, which give Q ~ 5 x 10e53 -- 5 x 10e54, represent a more likely scenario. As a by-product of the continuum subtraction we infer that young stellar populations account for ~ 0.4% of the visible stellar mass in the galaxy, and that these populations are spatially extended.

  5. Shuttling P(3) [P subscript 3] from Niobium to Rhodium: The Synthesis and Use of Ph(3)SnP(3)(C(6)H(8)) [Ph subscript 3 Sn P subscript 3 (C subscript 6 H subscript 8)] as a P(3) (-) [P subscript 3 superscript 1-] Synthon

    E-Print Network [OSTI]

    Cossairt, Brandi M.

    Anatomy of a P3? [P subscript 3 superscript -] synthon: The Ph3SnP3(C6H8) [Ph subscript 3 Sn P subscript 3 (C subscript 6 H subscript 8)] molecule (see picture; Sn?red, P?orange) has been synthesized by triphosphorus ...

  6. 3C.PDF

    Broader source: Energy.gov (indexed) [DOE]

    an agreement between Mozambique and Enron Corporation to develop and market the Pande natural gas reserves and related pipeline infrastructure. On the day of the trip to...

  7. C C3 C

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced. C o w l i t z C o . C l a r k C o . C l a r k C o

  8. National CHP Roadmap: Doubling Combined Heat and Power Capacity...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CHP Roadmap: Doubling Combined Heat and Power Capacity in the United States by 2010, March 2001 National CHP Roadmap: Doubling Combined Heat and Power Capacity in the United States...

  9. Evaluation of capacity release transactions in the natural gas industry

    E-Print Network [OSTI]

    Lautzenhiser, Stephen

    1994-01-01T23:59:59.000Z

    The purpose of this thesis is to analyze capacity release transactions in the natural gas industry and to state some preliminary conclusions about how the capacity release market is functioning. Given FERC's attempt to ...

  10. Storage and capacity rights markets in the natural gas industry

    E-Print Network [OSTI]

    Paz-Galindo, Luis A.

    1999-01-01T23:59:59.000Z

    This dissertation presents a different approach at looking at market power in capacity rights markets that goes beyond the functional aspects of capacity rights markets as access to transportation services. In particular, ...

  11. anaerobic work capacity: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    aspect of working memory (WM) is the capacity to maintain goal-relevant information in mind, but little is known about how this capacity develops in the human brain. We compared...

  12. Model NOx storage systems: Storage capacity and thermal aging...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Model NOx storage systems: Storage capacity and thermal aging of BaOtheta- Al2O3NiAl(100). Model NOx storage systems: Storage capacity and thermal aging of BaOtheta- Al2O3...

  13. Optimal Capacity Conversion for Product Transitions Under High Service Requirements

    E-Print Network [OSTI]

    Li, Hongmin

    We consider the capacity planning problem during a product transition in which demand for a new-generation product gradually replaces that for the old product. Capacity for the new product can be acquired both by purchasing ...

  14. The economics of shutting and restarting primary aluminium smelting capacity

    SciTech Connect (OSTI)

    Driscoll, K.J. [CRU International, Ltd., London (United Kingdom)

    1996-10-01T23:59:59.000Z

    In recent years the aluminum industry in the Western world has been operating well below capacity, with cutbacks in production due largely to the depressed aluminum market conditions of 1992 and 1993. Since mid-1995, however, aluminum producers have begun restarting idled capacity. Extensive efforts and preparation are required both to close capacity in an orderly manner and to restart idled capacity. This paper presents a comprehensive analysis of the costs of shutting capacity, maintaining idled capacity, and restarting potlines. Costs have been calculated for a smelter which may be considered representative of the industry as a whole. Technical aspects and commercial data are outlined for the representative smelter, with costs presented under a variety of shutdown and restart conditions. Additionally, the time required to bring capacity back on-line is examined for several scenarios, and the economic impact of idled capacity is discussed.

  15. ISO New England Forward Capacity Market (Rhode Island)

    Broader source: Energy.gov [DOE]

    Under the Forward Capacity Market (FCM), ISO New England projects the capacity needs of the region’s power system three years in advance and then holds an annual auction to purchase the power...

  16. Author's personal copy Ramp metering and freeway bottleneck capacity

    E-Print Network [OSTI]

    Levinson, David M.

    ; Hall and Agyemang-Duah, 1991; Banks, 1991a,b). The two-capacity hypothesis argues that metering can

  17. Constrained capacity of MIMO Rayleigh fading channels 

    E-Print Network [OSTI]

    He, Wenyan

    2011-08-08T23:59:59.000Z

    . : : : : : : : : : : : : : : : : 32 1 CHAPTER I INTRODUCTION As IEEE 802.11n standards become more and more readily available in various elec- tronics products, multi-input multi-output (MIMO) has never been more accepted by the general public. With 3G networks gradually... Array? ? M N 11h NMh ijh Fig. 1. Block diagram of a MIMO system. This thesis follows the style of IEEE Transactions on Information Theory. 2 A. Previous Work on MIMO Capacity After the pioneering work on MIMO systems was published by Telatar [1...

  18. Petrochem industry expands North American MTBE capacity

    SciTech Connect (OSTI)

    Not Available

    1992-10-05T23:59:59.000Z

    This paper reports that petrochemical manufacturers continue to increase methyl tertiary butyl ether (MTBE) capacity in North America. The action reflects refiners' reformulation of gasoline to help reduce auto emissions. Demand for gasoline blending oxygenates such as MTBE is expected to increase as U.S. refiners reconfigure processing trains to produce fuels meeting requirements of the Clean Air Act amendments of 1990. Recent progress includes plans to build an MTBE plant in Mexico and start-ups of plants on the U.S. Gulf Coast and in Canada.

  19. Excess Capacity from LADWP Control Area

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T,OfficeEnd of Year 2010Salt | DepartmentExamination Report:Excess Capacity from

  20. Property:Capacity | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation,PillarPublicationType Jump to: navigation, search This isCapRockAge JumpCapacity

  1. Property:USGSMeanCapacity | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGenerationMethod Jump to:This property isType"USGSMeanCapacity Jump to:

  2. STATE OF CALIFORNIA MAXIMUM RATED TOTAL COOLING CAPACITY

    E-Print Network [OSTI]

    /09) CALIFORNIA ENERGY COMMISSION INSTALLATION CERTIFICATE CF-6R-MECH-27-HERS Maximum Rated Total Cooling Capacity of the installed system (Btu/hr) 3b Sum of the ARI Rated Total Cooling Capacities of multiple systems installed Cooling Capacities of the installed cooling systems must be calculated and entered in row 3b. 4a MRTCC

  3. GROUNDWATER NITRATE REMOVAL CAPACITY OF RIPARIAN ZONES IN

    E-Print Network [OSTI]

    Gold, Art

    , and 3 in Urban watersheds to study denitrification capacity. Mini-piezometers were installed at eachGROUNDWATER NITRATE REMOVAL CAPACITY OF RIPARIAN ZONES IN URBANIZING WATERSHEDS BY TARA KIMBERLY and geomorphology of riparian zones, potentially changing riparian groundwater denitrification capacity. Little work

  4. Manure Storage Winter Capacity Planning Level Guidance January 1, 2013

    E-Print Network [OSTI]

    Guiltinan, Mark

    1 Manure Storage Winter Capacity Planning Level Guidance January 1, 2013 The guidance outlined in this document is to be used to determine the Manure Storage Winter Capacity Planning Level for CAFO operations must be documented in the NMP Standard Format. For determining the manure storage winter capacity

  5. Developing Leadership Capacity Conference The New Romantics of Responsible Leadership

    E-Print Network [OSTI]

    Diggle, Peter J.

    The 6th Developing Leadership Capacity Conference The New Romantics of Responsible Leadership 8th Conference Timetable Developing Leadership Capacity in Times of Austerity and Economic Crisis Grasmere from 6th Developing Leadership Capacity Conference Monday 7th July 2014 Venue 10.30 Round Table Event

  6. Assessing Efficiency and Capacity in Fisheries James E. Kirkley

    E-Print Network [OSTI]

    Assessing Efficiency and Capacity in Fisheries James E. Kirkley College of William and Mary.M.Ward@noaa.gov ____________________ Prepared for the National Marine Fisheries Service Workshop of "Assessing Technical Efficiency and Capacity in Fisheries (Silver Spring, Maryland; September 29 - October 1, 1999). #12;Efficiency and Capacity iv Table

  7. Capacity of Wireless Ad Hoc Networks Using Practical Directional Antennas

    E-Print Network [OSTI]

    , which is called MC-MDA network. The capacity in MC-MDA network is derived under arbitrary and random of side lobe and back lobe into account. We derive the capacity upper-bounds of MC-MDA networks decreases when s increases. Moreover, we compare the network capacity of MC-MDA using the simplified antenna

  8. TOWARDS REACHING CONSENSUS IN THE DETERMINATION OF PHOTOVOLTAICS CAPACITY CREDIT

    E-Print Network [OSTI]

    Perez, Richard R.

    , 251 Fuller Rd Albany, NY, 12203 Perez@asrc.cestm.albany,edu Mike Taylor Solar Electric Power effort to reach consensus on the notion of capacity credit for solar power electrical generation capacity or capacity credit of a power plant quantifies the output of a power plant that effectively

  9. Programmable Differential Delay Circuit With Fine Delay Adjustment

    DOE Patents [OSTI]

    DeRyckere, John F. (Eau Claire, WI); Jenkins, Philip Nord (Eau Claire, WI); Cornett, Frank Nolan (Chippewa Falls, WI)

    2002-07-09T23:59:59.000Z

    Circuitry that provides additional delay to early arriving signals such that all data signals arrive at a receiving latch with same path delay. The delay of a forwarded clock reference is also controlled such that the capturing clock edge will be optimally positioned near quadrature (depending on latch setup/hold requirements). The circuitry continuously adapts to data and clock path delay changes and digital filtering of phase measurements reduce errors brought on by jittering data edges. The circuitry utilizes only the minimum amount of delay necessary to achieve objective thereby limiting any unintended jitter. Particularly, this programmable differential delay circuit with fine delay adjustment is designed to allow the skew between ASICS to be minimized. This includes skew between data bits, between data bits and clocks as well as minimizing the overall skew in a channel between ASICS.

  10. Adjustable Nonlinear Springs to Improve Efficiency of Vibration Energy Harvesters

    E-Print Network [OSTI]

    S. Boisseau; G. Despesse; B. Ahmed Seddik

    2015-06-01T23:59:59.000Z

    Vibration Energy Harvesting is an emerging technology aimed at turning mechanical energy from vibrations into electricity to power microsystems of the future. Most of present vibration energy harvesters are based on a mass spring structure introducing a resonance phenomenon that allows to increase the output power compared to non-resonant systems, but limits the working frequency bandwidth. Therefore, they are not able to harvest energy when ambient vibrations' frequencies shift. To follow shifts of ambient vibration frequencies and to increase the frequency band where energy can be harvested, one solution consists in using nonlinear springs. We present in this paper a model of adjustable nonlinear springs (H-shaped springs) and their benefits to improve velocity-damped vibration energy harvesters' (VEH) output powers. A simulation on a real vibration source proves that the output power can be higher in nonlinear devices compared to linear systems (up to +48%).

  11. Capacity additions ease tight methanol supply

    SciTech Connect (OSTI)

    Greek, B.F. (C and EN, Houston, TX (US))

    1988-10-03T23:59:59.000Z

    Two menthanol plants now in operation - one in the U.S., the other in Chile - will boost global supplies of methanol more than 375 million gal annually. This large capacity addition and smaller expansions in other parts of the world will exceed demand growth during 1988 and 1989, easing the squeeze on supplies. As the result of increased supplies, methanol prices could slip slightly in the fourth quarter. They are more likely to decline next year, however. The two plants, which started up in August, are owned and operated by Tenneco Oil Co. Processing and Marketing and by Cape Horn Methanol (CHM). The Tenneco plant, located in Pasadena, Tex., was restarted after a shutdown in 1982 when prices for methanol were low. It now is running at full capacity of 125 million gal per year. The plant uses the low-pressure process technology of Lurgi, reportedly requiring for feedstock and energy between 100,000 and 125,000 cu ft of methane per gallon. Global trade in methanol smooths out the supply and demand inconsistencies. Surging methanol demand in the U.S. and in Western Europe has been met by imports from areas where methanol production is most economical - that is, where natural gas is readily available and has no other application as high in value. Canada, Chile, and Trinidad are examples of those areas.

  12. Information storage capacity of discrete spin systems

    SciTech Connect (OSTI)

    Yoshida, Beni, E-mail: rouge@caltech.edu

    2013-11-15T23:59:59.000Z

    Understanding the limits imposed on information storage capacity of physical systems is a problem of fundamental and practical importance which bridges physics and information science. There is a well-known upper bound on the amount of information that can be stored reliably in a given volume of discrete spin systems which are supported by gapped local Hamiltonians. However, all the previously known systems were far below this theoretical bound, and it remained open whether there exists a gapped spin system that saturates this bound. Here, we present a construction of spin systems which saturate this theoretical limit asymptotically by borrowing an idea from fractal properties arising in the Sierpinski triangle. Our construction provides not only the best classical error-correcting code which is physically realizable as the energy ground space of gapped frustration-free Hamiltonians, but also a new research avenue for correlated spin phases with fractal spin configurations. -- Highlights: •We propose a spin model with fractal ground states and study its coding properties. •We show that the model asymptotically saturates a theoretical limit on information storage capacity. •We discuss its relations to various theoretical physics problems.

  13. SHEAR WAVE SEISMIC STUDY COMPARING 9C3D SV AND SH IMAGES WITH 3C3D C-WAVE IMAGES

    SciTech Connect (OSTI)

    John Beecherl; Bob A. Hardage

    2004-07-01T23:59:59.000Z

    The objective of this study was to compare the relative merits of shear-wave (S-wave) seismic data acquired with nine-component (9-C) technology and with three-component (3-C) technology. The original proposal was written as if the investigation would be restricted to a single 9-C seismic survey in southwest Kansas (the Ashland survey), on the basis of the assumption that both 9-C and 3-C S-wave images could be created from that one data set. The Ashland survey was designed as a 9-C seismic program. We found that although the acquisition geometry was adequate for 9-C data analysis, the source-receiver geometry did not allow 3-C data to be extracted on an equitable and competitive basis with 9-C data. To do a fair assessment of the relative value of 9-C and 3-C seismic S-wave data, we expanded the study beyond the Ashland survey and included multicomponent seismic data from surveys done in a variety of basins. These additional data were made available through the Bureau of Economic Geology, our research subcontractor. Bureau scientists have added theoretical analyses to this report that provide valuable insights into several key distinctions between 9-C and 3-C seismic data. These theoretical considerations about distinctions between 3-C and 9-C S-wave data are presented first, followed by a discussion of differences between processing 9-C common-midpoint data and 3-C common-conversion-point data. Examples of 9-C and 3-C data are illustrated and discussed in the last part of the report. The key findings of this study are that each S-wave mode (SH-SH, SV-SV, or PSV) involves a different subsurface illumination pattern and a different reflectivity behavior and that each mode senses a different Earth fabric along its propagation path because of the unique orientation of its particle-displacement vector. As a result of the distinct orientation of each mode's particle-displacement vector, one mode may react to a critical geologic condition in a more optimal way than do the other modes. A conclusion of the study is that 9-C seismic data contain more rock and fluid information and more sequence and facies information than do 3-C seismic data; 9-C data should therefore be acquired in multicomponent seismic programs whenever possible.

  14. The connection between the radio jet and the gamma-ray emission in the radio galaxy 3C 120

    E-Print Network [OSTI]

    Casadio, Carolina; Grandi, Paola; Jorstad, Svetlana G; Marscher, Alan P; Lister, Matthew L; Kovalev, Yuri Y; Savolainen, Tuomas; Pushkarev, Alexander B

    2015-01-01T23:59:59.000Z

    We present the analysis of the radio jet evolution of the radio galaxy 3C 120 during a period of prolonged gamma-ray activity detected by the Fermi satellite between December 2012 and October 2014. We find a clear connection between the gamma-ray and radio emission, such that every period of gamma-ray activity is accompanied by the flaring of the mm-VLBI core and subsequent ejection of a new superluminal component. However, not all ejections of components are associated with gamma-ray events detectable by Fermi. Clear gamma-ray detections are obtained only when components are moving in a direction closer to our line of sight.This suggests that the observed gamma-ray emission depends not only on the interaction of moving components with the mm-VLBI core, but also on their orientation with respect to the observer. Timing of the gamma-ray detections and ejection of superluminal components locate the gamma-ray production to within almost 0.13 pc from the mm-VLBI core, which was previously estimated to lie about 0...

  15. Detection of Far-Infrared Water Vapor, Hydroxyl, and Carbon Monoxide Emissions from the Supernova Remnant 3C 391

    E-Print Network [OSTI]

    William T. Reach; Jeonghee Rho

    1998-09-01T23:59:59.000Z

    We report the detection of shock-excited far-infrared emission of H2O, OH, and CO from the supernova remnant 3C 391, using the ISO Long-Wavelength Spectrometer. This is the first detection of thermal H2O and OH emission from a supernova remnant. For two other remnants, W~28 and W~44, CO emission was detected but OH was only detected in absorption. The observed H2O and OH emission lines arise from levels within ~400 K of the ground state, consistent with collisional excitation in warm, dense gas created after the passage of the shock front through the dense clumps in the pre-shock cloud. The post-shock gas we observe has a density ~2x10^5 cm^{-3} and temperature 100-1000 K, and the relative abundances of CO:OH:H2O in the emitting region are 100:1:7 for a temperature of 200 K. The presence of a significant column of warm H2O suggests that the chemistry has been significantly changed by the shock. The existence of significant column densities of both OH and H2O, which is at odds with models for non-dissociative shocks into dense gas, could be due to photodissociation of H2O or a mix of fast and slow shocks through regions with different pre-shock density.

  16. A Shell of Thermal X-ray Emission Associated with the Young Crab-like Remnant 3C58

    E-Print Network [OSTI]

    Gotthelf, E V; Newburgh, L

    2006-01-01T23:59:59.000Z

    Deep X-ray imaging spectroscopy of the bright pulsar wind nebula 3C58 confirms the existence of an embedded thermal X-ray shell surrounding the pulsar PSR J0205+6449. Radially resolved spectra obtained with the XMM-Newton telescope are well-characterized by a power-law model with the addition of a soft thermal emission component in varying proportions. These fits reproduce the well-studied increase in the spectral index with radius attributed to synchrotron burn-off of high energy electrons. Most interestingly, a radially resolved thermal component is shown to map out a shell-like structure ~6' in diameter. The presence of a strong emission line corresponding to the Ne IX He-like transition requires an overabundance of ~3 x [Ne/Ne(sun)] in the Raymond-Smith plasma model. The best-fit temperature kT ~ 0.23 keV is essentially independent of radius for the derived column density of N_H = (4.2 +/- 0.1)E21 per cm squared. Our result suggests that thermal shells can be obscured in the early evolution of a supernova...

  17. Environmental Assessment for the Proposed Increase in the Facility Capacity and Petroleum Inventory at the Strategic Petroleum Reserve's Bryan Mound Storage Facility, Texas

    SciTech Connect (OSTI)

    N /A

    2004-11-24T23:59:59.000Z

    The DOE proposes that the authorized capacity of the BM facility and, upon Administration authorization, the petroleum inventory be increased by 3.5 million m{sup 3} (22 MMB). The proposed action may be subdivided into two distinct actions, the action to increase the facility capacity and the action to increase the facility's petroleum inventory, which is conditioned upon future authorization by the Administration. A portion of the proposed increase in facility capacity would be obtained via modification of the existing internal cavern infrastructure. Specifically, of the proposed increase in cavern capacity, up to 1.4 million m{sup 3} (8.8 MMB) would result from adjustment of the suspended casing of 10 caverns, thereby increasing the working cavern volumes without changing the cavern dimensions. The balance of the proposed increase to facility capacity, 2.1 million m{sup 3} (13.2 MMB), would result from administrative activities including the return of cavern 112 to service at its full capacity [approximately 1.9 million m{sup 3} (12 MMB)] and volume upgrades of at least 0.19 million m{sup 3} (1.2 MMB) based on new information obtained during sonar investigation of caverns.

  18. Data:3c77dab0-512e-4740-94b3-500c450bc22d | Open Energy Information

    Open Energy Info (EERE)

    Approval of the Cooperative must be obtained prior to the installation of any motor having a rated capacity of five horsepower or more. Source or reference: http:...

  19. Data:341d3c68-beb8-44cd-bd6c-06ded9ea582d | Open Energy Information

    Open Energy Info (EERE)

    Valley Elec Coop Inc Effective date: 20120401 End date if known: Rate name: Controlled Water Heaters - Storage Capacity over 80 Gallons with No Sub-meter Sector: Residential...

  20. Adsorption -capacity data for 283 organic compounds

    SciTech Connect (OSTI)

    Yaws, C.L.; Bu, L.; Nijhawan, S. [Lamar Univ., Beaumont, TX (United States)

    1995-05-01T23:59:59.000Z

    Adsorption on activated carbon is a widely used method for removing volatile organic compounds (VOCs) from gases and other exhaust streams. This article presents a compilation of adsorption-capacity data as a function of the VOC concentration in the gas. The results are useful in engineering and environmental studies, and in the design of carbon-based adsorption systems to remove unwanted organic pollutants from gases. For vapor control, carbon-based systems typically combine a carbon-adsorption unit with a secondary control method to reclaim or destroy the vapors desorbed during carbon-bed regeneration. To remove organics dissolved in wastewater, air stripping is typically used to transfer the organics to a vapor stream. Carbon adsorption is then used to separate the organics from the stripper exhaust. Collected vapors can be recovered for reuse or destroyed, depending on their value.

  1. Korean oxygenates rule sparks MTBE capacity plans

    SciTech Connect (OSTI)

    Kim, Hyung-Jin

    1994-06-15T23:59:59.000Z

    The Korean government`s strict standard for gasoline sold domestically is expected to have a significant impact on the methyl tert-butyl ether (MTBE) market. The mandate-requiring gasoline oxygen content of 0.5% this year, 0.75% by 1996, and 1.0% by 1998-has sparked a rush by Korean refineries to build new MTBE plants. If expansion plans are carried out, Korea`s MTBE capacity will increase from 280,000 m.t./year to 650,000 m.t./year by 1996, far surpassing predicted demand. Honam Oil, part of the Lucky Group, plans startup of a 100,000-m.t./year unit at Yeochon by early 1996. In addition, by the end of 1996 Ssangyong Oil will bring a 100,000-m.t./year unit onstream.

  2. Information storage capacity of discrete spin systems

    E-Print Network [OSTI]

    Beni Yoshida

    2012-12-24T23:59:59.000Z

    Understanding the limits imposed on information storage capacity of physical systems is a problem of fundamental and practical importance which bridges physics and information science. There is a well-known upper bound on the amount of information that can be stored reliably in a given volume of discrete spin systems which are supported by gapped local Hamiltonians. However, all the previously known systems were far below this theoretical bound, and it remained open whether there exists a gapped spin system that saturates this bound. Here, we present a construction of spin systems which saturate this theoretical limit asymptotically by borrowing an idea from fractal properties arising in the Sierpinski triangle. Our construction provides not only the best classical error-correcting code which is physically realizable as the energy ground space of gapped frustration-free Hamiltonians, but also a new research avenue for correlated spin phases with fractal spin configurations.

  3. Modeling the Capacity and Emissions Impacts of Reduced Electricity Demand. Part 1. Methodology and Preliminary Results.

    E-Print Network [OSTI]

    Coughlin, Katie

    2013-01-01T23:59:59.000Z

    in the required total installed capacity (GW). Additionalemissions and installed capacity per unit of generationb) The change in installed capacity by fuel/technology type,

  4. The NASA CSTI High Capacity Power Program

    SciTech Connect (OSTI)

    Winter, J.M.

    1994-09-01T23:59:59.000Z

    The SP-100 program was established in 1983 by DOD, DOE, and NASA as a joint program to develop the technology necessary for space nuclear power systems for military and civil applications. During 1986 and 1987, the NASA Advanced Technology Program was responsible for maintaining the momentum of promising technology advancement efforts started during Phase I of SP-100 and to strengthen, in key areas, the chances for successful development and growth capability of space nuclear reactor power systems for future space applications. In 1988, the NASA Advanced Technology Program was incorporated into NASA`s new Civil Space Technology Initiative (CSTI). The CSTI program was established to provide the foundation for technology development in automation and robotics, information, propulsion, and power. The CSTI High Capacity Power Program builds on the technology efforts of the SP-100 program, incorporates the previous NASA advanced technology project, and provides a bridge to the NASA exploration technology programs. The elements of CSTI high capacity power development include conversion systems - Stirling and thermoelectric, thermal management, power management, system diagnostics, and environmental interactions. Technology advancement in all areas, including materials, is required to provide the growth capability, high reliability and 7 to 10 years lifetime demanded for future space nuclear power systems. The overall program will develop and demonstrate the technology base required to provide a wide range of modular power systems while minimizing the impact of day/night operation as well as attitudes and distance from the Sun. Significant accomplishments in all of the program elements will be discussed, along with revised goals and project timelines recently developed.

  5. IMPACT OF DIELECTRIC PARAMETERS ON THE REFLECTIVITY OF 3C-SiC WAFERS WITH A ROUGH SURFACE MORPHOLOGY IN THE RESTSTRAHLEN REGION

    SciTech Connect (OSTI)

    J.A.A. Engelbrecht; E. Janzén; A. Henry; I.J. van Rooyen

    2014-04-01T23:59:59.000Z

    A layer-on-substrate model is used to obtain the infrared reflectance for 3C-SiC with a rough surface morphology. The effect of varying dielectric parameters of the “damaged layer” on the observed reflectivity of the 3C-SiC in the reststrahlen region is assessed. Different simulated reflectance spectra are obtained to those if the dielectric parameters of the “substrate” were varied. Most notable changes in the shape of the simulated reststrahlen peak are observed for changes in the high frequency dielectric constant, the phonon damping constant, the phonon frequencies and “thickness” of damaged surface layer.

  6. Discovery of Very High Energy Gamma-Rays from the Distant Flat Spectrum Radio Quasar 3C 279 with the MAGIC Telescope

    E-Print Network [OSTI]

    Masahiro Teshima; Elisa Prandini; Rudolf Bock; Manel Errando; Daniel Kranich; Pratik Majumdar; Daniel Mazin; Elina Lindfors; Eckart Lorenz; Mose Mariotti; Villi Scalzotto; Robert Wagner

    2007-09-10T23:59:59.000Z

    The quasar 3C 279 is one of the best-studied flat spectrum radio quasars. It is located at a comparatively large redshift of z=0.536: E>100 GeV observations of such distant sources were until recently impossible both due to the expected steep energy spectrum and the expected attenuation of the gamma-rays by the extragalactic background light. Here we present results on the observation of 3C 279 with the MAGIC telescope in early 2006. We report the detection of a significant very high energy gamma-ray signal in the MAGIC energy range on the observation night of 2006 February 23.

  7. Data:Dcbe0e9c-a02c-4beb-ba07-aa9a76b3c43a | Open Energy Information

    Open Energy Info (EERE)

    furnish, install, and maintain street lighting units. This rate is subject to a Power Cost Adjustment charge per all kWh, that varies on a monthly basis. Source or reference:...

  8. Data:3c3a7a9e-55df-4439-84ce-3b697d45689c | Open Energy Information

    Open Energy Info (EERE)

    commercial service rate Sector: Commercial Description: Purchased Power Adjustment cost + amount over 0.060 per kWh Source or reference: www.ci.north-saint-paul.mn.us...

  9. Data:3c96658e-7993-4756-bce5-8e8b03b50393 | Open Energy Information

    Open Energy Info (EERE)

    power plant cost adjustment factor:0.01000 for all kWh, all service classes. State of Michigan P.A. 295, of Public Acts 2008, commonly referred to as the Clean, Renewable and...

  10. Data:8ddac2a0-3c8e-4fb7-9ff4-44308cdf0d45 | Open Energy Information

    Open Energy Info (EERE)

    power plant cost adjustment factor:0.01000 for all kWh, all service classes. State of Michigan P.A. 295, of Public Acts 2008, commonly referred to as the Clean, Renewable and...

  11. Data:43427f05-c8da-4ac5-bc3b-3c9efc3b7f2e | Open Energy Information

    Open Energy Info (EERE)

    power plant cost adjustment factor: 0.01000 for all kWh, all service classes. State of Michigan P.A. 295, of Public Acts 2008, commonly referred to as the Clean, Renewable and...

  12. Data:17072fe2-a458-461f-9ea3-da0ba3c404ea | Open Energy Information

    Open Energy Info (EERE)

    Service Optional Time-of-Day Single Phase 8am-8pm Sector: Commercial Description: Power Cost Adjustment Clause All metered rates shall be subject to a positive or negative power...

  13. Debt-repayment capacity and projected adjustments for irrigated farms with a declining water level in an area of the Texas High Plains

    E-Print Network [OSTI]

    Khan, Waliul Islam

    1968-01-01T23:59:59.000Z

    , 382 131 '2, 251 1 Source: Unpublished data developed by personnel of the Economi" Research Service, U. S. Department of Agriculture, for National Project FE9 ? 19, "Analysis of Agricultural Produc- tion Response. " Eight hours per day for December... . and lira. Eugene Lena and to other American and Pakistani friends and well wishcrs fo" their encouragement. The author is indebted to U. S. AID and Government of Pakistan, especially the Departmen of Agricul. ure, Gov znment of East Pakistan...

  14. Adjustable Shock Test Sled for Haversine Pulses at 250 fps

    SciTech Connect (OSTI)

    Troy Hartwig; Brent Hower; Aaron Seaholm

    2008-05-05T23:59:59.000Z

    New test requirements were developed by Sandia National Laboratory to simulate a regime of shock testing not previously performed at the Kansas City Plant operated by Honeywell Federal Manufacturing & Technologies. These environments were unique in that they involved amplitude of shock >1000g with relatively long pulse durations (greater 5 ms but less than 10 ms) and involved velocity changes up to 235 ft/sec. Ten months were available to develop, design, manufacture and prove-in this new capability. We designed a new shock sled to deliver this new family of shock environments in a laboratory test. The performance range of the new sled includes five specific shocks (1000 g – 8 ms, 1300 - 6 ms, 1500 g – 5.4 ms, 1950 g – 6 ms, 2250 g – 5.4 ms; all haversine shaped), and it also incorporates adjustability to accommodate new shocks within this range. These shock environments result in velocity changes ranging from 160 fps to 250 fps. The test sled accommodates test articles weighing up to 20 lbs and measuring up to 10” along any axis.

  15. Apparatus for adjustably controlling valve movement and fuel injection

    SciTech Connect (OSTI)

    Miller, C.R.; Shyu, T.P.; Weber, J.R.

    1993-08-24T23:59:59.000Z

    Apparatus is described for adjustably controlling valve movement and fuel injection of an engine having at least one fuel injection system, one exhaust valve system, one intake valve system, a microprocessor controller for receiving input signals and delivering engine controlling electrical signals, and a liquid pressure system, comprising: a single piezoelectric motor connectable to the microprocessor controller and the liquid pressure system and being adapted to receive engine controlling electrical signals from the microprocessor and controllably delivering pressurized liquid signals to the liquid pressure system in response to the received signal; and a spool valve having a single spool, the valve having a plurality of inlets and outlets and being connectable to the liquid pressure system for receiving pressurized liquid signals therefrom and controllably moving the single spool of the spool valve and delivering valve and injection controlling signals to the valve systems and injector system and controlling both valve movement and fuel injection responsive to engine controlling electrical signals received by the piezoelectric motor.

  16. Capacitor charging FET switcher with controller to adjust pulse width

    DOE Patents [OSTI]

    Mihalka, Alex M. (Livermore, CA)

    1986-01-01T23:59:59.000Z

    A switching power supply includes an FET full bridge, a controller to drive the FETs, a programmable controller to dynamically control final output current by adjusting pulse width, and a variety of protective systems, including an overcurrent latch for current control. Power MOSFETS are switched at a variable frequency from 20-50 kHz to charge a capacitor load from 0 to 6 kV. A ferrite transformer steps up the DC input. The transformer primary is a full bridge configuration with the FET switches and the secondary is fed into a high voltage full wave rectifier whose output is connected directly to the energy storage capacitor. The peak current is held constant by varying the pulse width using predetermined timing resistors and counting pulses. The pulse width is increased as the capacitor charges to maintain peak current. A digital ripple counter counts pulses, and after the desired number is reached, an up-counter is clocked. The up-counter output is decoded to choose among different resistors used to discharge a timing capacitor, thereby determining the pulse width. A current latch shuts down the supply on overcurrent due to either excessive pulse width causing transformer saturation or a major bridge fault, i.e., FET or transformer failure, or failure of the drive circuitry.

  17. Adjustment, Political Transition, and the Organization of Military Power in Nigeria

    E-Print Network [OSTI]

    Ihonvbere, Julius O.

    1991-01-01T23:59:59.000Z

    and Cambridge Universities in Nigeria, Lagos. May 1990. 44future after NOTES 1 "Nigeria: Taming the Army," AfricanPhillips, Economic Impact of Nigeria's Structural Adjustment

  18. ADJUSTMENT COSTS, LEARNING-BY-DOING, AND TECHNOLOGY ADOPTION UNDER UNCERTAINTY

    E-Print Network [OSTI]

    Pavlova, Anna

    2003-01-27T23:59:59.000Z

    We consider a variety of vintage capital models of a firm's choice of technology under uncertainty in the presence of adjustment costs and technology-specific learning. ...

  19. Asymmetric Price Adjustment and Consumer Search: An Examination of the Retail Gasoline Market

    E-Print Network [OSTI]

    Lewis, Matt

    2003-01-01T23:59:59.000Z

    The Behavior of Retail Gasoline Prices: Symmetric or Not? ”Adjustment of U.K. Retail Gasoline Prices to Cost Changes. ”documented that retail gasoline prices respond more quickly

  20. Asymmetric Price Adjustment and Consumer Search: An Examination of the Retail Gasoline Industry

    E-Print Network [OSTI]

    Lewis, Matt

    2003-01-01T23:59:59.000Z

    Adjustment of U.K. Retail Gasoline Prices to Cost Changes. ”The Behavior of Retail Gasoline Prices: Symmetric or Not? ”documented that retail gasoline prices respond more quickly

  1. Hydrogen contribution to the heat capacity of single phase, face centered cubic scandium deuteride

    SciTech Connect (OSTI)

    Moss, M.; Richards, P.M.; Venturini, E.L.; Gieske, J.H.; Graeber, E.J.

    1986-01-15T23:59:59.000Z

    The heat capacity at constant pressure, C/sub p/, of single-phase, face-centered cubic ScD/sub x/ (x = 1.75, 1.83, 1.91, and 1.99) was measured from room temperature to 950 K, and analyzed in terms of various contributions of the deuterium and metal constituents. Values ranged from approximately 40 to 80 J mol/sup -1/ K/sup -1/ with increasing temperature. The heat capacity at constant volume was assumed to be composed of lattice contributions from an acoustic vibrational mode, C/sup l/(a)/sub v/, and an optical vibrational mode, C/sup l/(o)/sub v/, plus an electronic contribution, C/sup e//sub v/. The acoustic part, C/sup l/(a)/sub v/, was evaluated as a Debye term with characteristic Debye temperatures calculated from measured values of temperature-dependent acoustic velocities and lattice constants. An isotope-adjusted Einstein temperature, derived from inelastic neutron scattering measurements on ScH/sub 2/, was used to find C/sup l/(o)/sub v/. The C/sup e//sub v/ term was evaluated from a published value of the electronic heat capacity constant for ScH/sub 2/ (assumed to be the same for ScD/sub 2/). Particular attention was paid to the dilation term, C/sup d/ = C/sub p/-C/sub v/, by evaluating it explicitly from the temperature-dependent volume expansion and elastic modulus.

  2. 2014 Across-Breed EPD Adjustment Factors Released When using EPDs, bulls from one breed cannot be compared to another unless an adjustment factor is used. Since 1993,

    E-Print Network [OSTI]

    Florida, University of

    Research Center in Clay Center, Nebraska have released adjustment factors for growth traits and maternal Tough Decisions I have heard several questions concerning 1.) Should I sell my calves at weaning?, And 2

  3. Surface and bulk modified high capacity layered oxide cathodes with low irreversible capacity loss

    DOE Patents [OSTI]

    Manthiram, Arumugam (Austin, TX); Wu, Yan (Austin, TX)

    2010-03-16T23:59:59.000Z

    The present invention includes compositions, surface and bulk modifications, and methods of making of (1-x)Li[Li.sub.1/3Mn.sub.2/3]O.sub.2.xLi[Mn.sub.0.5-yNi.sub.0.5-yCo.sub.2- y]O.sub.2 cathode materials having an O3 crystal structure with a x value between 0 and 1 and y value between 0 and 0.5, reducing the irreversible capacity loss in the first cycle by surface modification with oxides and bulk modification with cationic and anionic substitutions, and increasing the reversible capacity to close to the theoretical value of insertion/extraction of one lithium per transition metal ion (250-300 mAh/g).

  4. FIRST-PRINCIPLES CALCULATIONS OF CHARGE STATES AND FORMATION ENERGIES OF Mg, Al, and Be TRANSMUTANTS IN 3C-SiC

    SciTech Connect (OSTI)

    Hu, Shenyang Y.; Setyawan, Wahyu; Jiang, Weilin; Henager, Charles H.; Kurtz, Richard J.

    2014-08-28T23:59:59.000Z

    The Vienna Ab-initio Simulation Package (VASP) is employed to calculate charge states and the formation energies of Mg, Al and Be transmutants at different lattice sites in 3C-SiC. The results provide important information on the dependence of the most stable charge state and formation energy of Mg, Al, Be and vacancies on electron potentials.

  5. A CHANDRA OBSERVATION OF 3C 288—REHEATING THE COOL CORE OF A 3 keV CLUSTER FROM A NUCLEAR OUTBURST at z = 0.246

    E-Print Network [OSTI]

    Lal, D. V.

    We present results from a 42 ks Chandra/ACIS-S observation of the transitional FR I/FR II radio galaxy 3C 288 at z = 0.246. We detect ~3 keV gas extending to a radius of ~0.5 Mpc with a 0.5-2.0 keV luminosity of 6.6 × ...

  6. THE HARD X-RAY VIEW OF REFLECTION, ABSORPTION, AND THE DISK-JET CONNECTION IN THE RADIO-LOUD AGN 3C 33

    E-Print Network [OSTI]

    Evans, Daniel A.

    We present results from Suzaku and Swift observations of the nearby radio galaxy 3C 33, and investigate the nature of absorption, reflection, and jet production in this source. We model the 0.5-100 keV nuclear continuum ...

  7. An Efficient Algorithm for Computing Robust Minimum Capacity st Cuts

    E-Print Network [OSTI]

    Doug Altner

    2008-03-20T23:59:59.000Z

    Mar 20, 2008 ... In this paper, we present an efficient algorithm for computing minimum capacity s-t cuts under a polyhedral model of robustness. Our algorithm ...

  8. Indonesia-ECN Capacity building for energy policy formulation...

    Open Energy Info (EERE)

    building for energy policy formulation and implementation of sustainable energy projects Jump to: navigation, search Name CASINDO: Capacity development and strengthening for energy...

  9. Open versus closed loop capacity equilibria in electricity markets ...

    E-Print Network [OSTI]

    S. Wogrin

    2012-05-07T23:59:59.000Z

    May 7, 2012 ... Abstract: We consider two game-theoretic models of the generation capacity expansion problem in liberalized electricity markets. The first is an ...

  10. CLEAN-Capacity Building and Training for Low Emissions Development...

    Open Energy Info (EERE)

    Development Planning Jump to: navigation, search Tool Summary Name: CLEAN-Capacity Building and Training for Low Emissions Development Planning AgencyCompany Organization:...

  11. Optimization of Flexural capacity Of Reinforced fibrous concrete ...

    E-Print Network [OSTI]

    D Suji

    2005-12-22T23:59:59.000Z

    Dec 22, 2005 ... Optimization of Flexural capacity Of Reinforced fibrous concrete Beams Using Genetic Algorithm. D Suji (suji_mohan2002 ***at*** yahoo.com)

  12. affecting energy capacity: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    organization of Santiago affects its capacity to design and apply urban energy initiatives MIT - DSpace Summary: The need for greater levels of energy efficiency has never...

  13. Geothermal: Sponsored by OSTI -- Geothermal Plant Capacity Factors

    Office of Scientific and Technical Information (OSTI)

    Plant Capacity Factors Geothermal Technologies Legacy Collection HelpFAQ | Site Map | Contact Us HomeBasic Search About Publications Advanced Search New Hot Docs News Related...

  14. Design and Evaluation of Novel High Capacity Cathode Materials...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    & Publications Design and Evaluation of Novel High Capacity Cathode Materials Lithium Source For High Performance Li-ion Cells Lithium Source For High Performance Li-ion...

  15. DOE Receives Responses on the Implementation of Large-Capacity...

    Broader source: Energy.gov (indexed) [DOE]

    Enforcement Guidance on Large-Capacity Clothes Washer Waivers and the Waiver Process Electrolux Gibson Air Conditioner and Equator Clothes Washer Fail DOE Energy Star Testing...

  16. assessing nuclear capacity: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    who are familiar Langendoen, Koen 5 Assessing the Control Systems Capacity for Demand Response in Energy Storage, Conversion and Utilization Websites Summary: LBNL-5319E...

  17. Serbia-Enhancing Capacity for Low Emission Development Strategies...

    Open Energy Info (EERE)

    for Low Emission Development Strategies (EC-LEDS) Jump to: navigation, search Name Serbia-Enhancing Capacity for Low Emission Development Strategies (EC-LEDS) AgencyCompany...

  18. The NASA CSTI High Capacity Power Project

    SciTech Connect (OSTI)

    Winter, J.; Dudenhoefer, J.; Juhasz, A.; Schwarze, G.; Patterson, R.; Ferguson, D.; Titran, R. [National Aeronautics and Space Administration, Cleveland, OH (United States). Lewis Research Center; Schmitz, P. [Sverdrup Technology, Inc., Brook Park, OH (United States). Lewis Research Center Group; Vandersande, J. [Jet Propulsion Lab., Pasadena, CA (United States)

    1994-09-01T23:59:59.000Z

    The SP-100 Space Nuclear Power Program was established in 1983 by DOD, DOE, and NASA as a joint program to develop technology for military and civil applications. Starting in 1986, NASA has funded a technology program to maintain the momentum of promising aerospace technology advancement started during Phase I of SP-100 and to strengthen, in key areas, the changes for successful development and growth capability of space nuclear reactor power systems for a wide range of future space applications. The elements of the CSTI High Capacity Power Project include Systems Analysis, Stirling Power Conversion, Thermoelectric Power Conversion, Thermal Management, Power Management, Systems Diagnostics, Environmental Interactions, and Material/Structural Development. Technology advancement in all elements is required to provide the growth capability, high reliability and 7 to 10 year lifetime demanded for future space nuclear power systems. The overall project with develop and demonstrate the technology base required to provide a wide range of modular power systems compatible with the SP-100 reactor which facilitates operation during lunar and planetary day/night cycles as well as allowing spacecraft operation at any attitude or distance from the sun. Significant accomplishments in all of the project elements will be presented, along with revised goals and project timelines recently developed.

  19. Ergonomics Self-Evaluation: Computer Workstation Step 1: Adjust the Chair

    E-Print Network [OSTI]

    Johnston, Daniel

    Ergonomics Self-Evaluation: Computer Workstation Step 1: Adjust the Chair a. Seat height ­ Adjust medical condition or ergonomic concern, contact the UT at Austin Occupational Health Program at 512.471.4OHP(4647). http://www.utexas.edu/hr/current/services/ohp.html Ergonomic evaluation services

  20. Emerging Furniture Design Challenges and Product Development -Plus-size Furniture and Adjustable Furniture

    E-Print Network [OSTI]

    Emerging Furniture Design Challenges and Product Development - Plus-size Furniture and Adjustable population, · Furniture with reduced environmental impact, · Furniture lifecycle and end-of-life disposal of Problem: Adjustable furniture is a high-end product which provides customers more options to increase

  1. Cyclical adjustment, capital-labor substitution and total factor productivity convergence East Germany after unification

    E-Print Network [OSTI]

    Pfeifer, Holger

    Cyclical adjustment, capital-labor substitution and total factor productivity convergence ­ East integration and massive help from the Federal Government East German productivity catching up faded out in the nineties. This paper presents panel-data estimates of the productivity adjustment based on a production

  2. A Bayesian method for linear, inequality-constrained adjustment and its application to GPS positioning

    E-Print Network [OSTI]

    Santerre, Rock

    A Bayesian method for linear, inequality-constrained adjustment and its application to GPS 2005 Abstract. One of the typical approaches to linear, inequality-constrained adjustment (LICA be improved significantly and the new approach is feasible. Key words: Linear, inequality-constrained

  3. Section 1 (For Expenditure Adjustments) EXPENDITURES FOR BUSINESS BUDGET BUDGET BUDGET BUDGET OFFICE USE

    E-Print Network [OSTI]

    Tennessee, University of

    DATE Section 1 (For Expenditure Adjustments) EXPENDITURES FOR BUSINESS BUDGET BUDGET BUDGET BUDGET AMOUNT AMOUNT AMOUNT CODE TOTAL FOR BUSINESS Section 2 (For Revenue and Other Adjustments) BUDGET BUDGET/Chief Administrative Officer Department Head Chief Business Officer Dean or Director Vice President for Budget

  4. Capacity Building on Access to Energy in Africa: Final Report

    E-Print Network [OSTI]

    Capacity Building on Access to Energy in Africa: Final Report Danish Support to EUEI Facilitation from African partner organisations and individuals Title: Capacity Building on Access to Energy (Danish Ministry of Foreign Affairs) Cover: Solar home system installed at house near Chipata, Eastern

  5. MASTERS REPORT ANALYSIS AND MODELING OF ACID NEUTRALIZING CAPACITY

    E-Print Network [OSTI]

    itself against acidification and is used to monitor the effect of acid rain on watersheds. From 1993MASTERS REPORT ANALYSIS AND MODELING OF ACID NEUTRALIZING CAPACITY IN THE MID-ATLANTIC HIGHLANDS UNIVERSITY #12;ABSTRACT Acid Neutralizing Capacity (ANC) is a measure of a solution's ability to buffer

  6. Multicomponent Adsorption and Chromatography with Uneven Saturation Capacities

    E-Print Network [OSTI]

    Gu, Tingyue

    Multicomponent Adsorption and Chromatography with Uneven Saturation Capacities Tingyue Gu, Gow, the extent of size exclusion is not the same for all the components. This often causes uneven adsorption capacity and vice versa. A study of size exclusion coupled with adsorption is a rel- atively new topic

  7. Asymptotic entanglement capacity of the Ising and anisotropic Heisenberg interactions

    E-Print Network [OSTI]

    Childs, A M; Verstraete, F; Vidal, G

    2003-01-01T23:59:59.000Z

    We compute the asymptotic entanglement capacity of the Ising interaction ZZ, the anisotropic Heisenberg interaction XX + YY, and more generally, any two-qubit Hamiltonian with normal form K = a XX + b YY. We also describe an entanglement assisted classical communication protocol using the Hamiltonian K with rate equal to the asymptotic entanglement capacity.

  8. Adaptive Online Battery Parameters/SOC/Capacity Co-estimation

    E-Print Network [OSTI]

    Chow, Mo-Yuen

    and even storage ageing of the battery. Following our previous publications in which we developed an onlineAdaptive Online Battery Parameters/SOC/Capacity Co-estimation Habiballah Rahimi-Eichi and Mo parameters to characterize the performance and application of a battery. Although the nominal capacity

  9. Prediction methods for capacity of drag anchors in clayey soils

    E-Print Network [OSTI]

    Yoon, Yeo Hoon

    2002-01-01T23:59:59.000Z

    A drag anchor is a marine foundation element, which is penetrated into the seabed by dragging in order to generate a required capacity. The holding capacity of a drag anchor in a particular soil condition is developed by soil resistance acting...

  10. On the Capacity of Hybrid Wireless Networks Benyuan Liu

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    On the Capacity of Hybrid Wireless Networks Benyuan Liu , Zhen Liu + , Don Towsley Department 704 Yorktown Heights, NY 10598 Abstract-- We study the throughput capacity of hybrid wireless networks stations are assumed to be connected by a high-bandwidth wired network and act as relays for wireless nodes

  11. A Framework for the Capacity Evaluation of Multihop Wireless Networks

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    A Framework for the Capacity Evaluation of Multihop Wireless Networks Herv´e Rivano CNRS - INRIA and localized CDS. Index Terms--network capacity, multihop wireless networks, upper and lower bounds, linear programing I. INTRODUCTION Ad hoc networks are spontaneous multihop topologies of wireless nodes

  12. Does Beamforming achieve Outage Capacity with Direction Feedback?

    E-Print Network [OSTI]

    Jafar, Syed A.

    Does Beamforming achieve Outage Capacity with Direction Feedback? Sudhir Srinivasa and Syed Ali Jafar Sriram Vishwanath Electrical Engineering and Computer Science Electrical and Computer Engineering: syed@ece.uci.edu, sudhirs@uci.edu Email: sriram@ece.utexas.edu Abstract We explore the outage capacity

  13. Energy-Efficient Capacity Optimization in Wireless Networks

    E-Print Network [OSTI]

    Wang, Yu

    Energy-Efficient Capacity Optimization in Wireless Networks Lu Liu, Xianghui Cao, Yu Cheng, Lili Du capacity in the most energy-efficient manner over a general large-scale wireless network, say, a multi numerical results demonstrate the energy efficiency improvement by the proposed energy-efficient

  14. Sizing Storage and Wind Generation Capacities in Remote Power Systems

    E-Print Network [OSTI]

    Victoria, University of

    Sizing Storage and Wind Generation Capacities in Remote Power Systems by Andy Gassner B Capacities in Remote Power Systems by Andy Gassner B.Sc., University of Wisconsin ­ Madison, 2003 Supervisory and small power systems. However, the variability due to the stochastic nature of the wind resource

  15. Figure 4: Case study network Maximising Renewable Capacity

    E-Print Network [OSTI]

    Harrison, Gareth

    . A variety of techniques have been used for distribution system optimisations. Here, Optimal Power Flow (OPF at several combinations of locations (DG at 0.9 lagging power factor). 3.5 MW of capacity is foundW is allocated at A. Without network reinforcement connection of the full 3.5 MW of mini-hydro capacity

  16. ORIGINAL ARTICLE Effect of Different Sitting Postures on Lung Capacity,

    E-Print Network [OSTI]

    Makhsous, Mohsen

    ORIGINAL ARTICLE Effect of Different Sitting Postures on Lung Capacity, Expiratory Flow, and Lumbar, Makhsous M. Effect of different sitting postures on lung capacity, expiratory flow, and lumbar lordosis. Arch Phys Med Rehabil 2006;87:504-9. Objective: To investigate the effect of sitting posture on lung

  17. Assessment of the methane oxidation capacity of compacted soils intended for use as landfill cover materials

    SciTech Connect (OSTI)

    Rachor, Ingke, E-mail: i.rachor@ifb.uni-hamburg.de [University of Hamburg, Institute of Soil Science, Allende-Platz 2, 20146 Hamburg (Germany); Gebert, Julia; Groengroeft, Alexander; Pfeiffer, Eva-Maria [University of Hamburg, Institute of Soil Science, Allende-Platz 2, 20146 Hamburg (Germany)

    2011-05-15T23:59:59.000Z

    The microbial oxidation of methane in engineered cover soils is considered a potent option for the mitigation of emissions from old landfills or sites containing wastes of low methane generation rates. A laboratory column study was conducted in order to derive design criteria that enable construction of an effective methane oxidising cover from the range of soils that are available to the landfill operator. Therefore, the methane oxidation capacity of different soils was assessed under simulated landfill conditions. Five sandy potential landfill top cover materials with varying contents of silt and clay were investigated with respect to methane oxidation and corresponding soil gas composition over a period of four months. The soils were compacted to 95% of their specific proctor density, resulting in bulk densities of 1.4-1.7 g cm{sup -3}, reflecting considerably unfavourable conditions for methane oxidation due to reduced air-filled porosity. The soil water content was adjusted to field capacity, resulting in water contents ranging from 16.2 to 48.5 vol.%. The investigated inlet fluxes ranged from 25 to about 100 g CH{sub 4} m{sup -2} d{sup -1}, covering the methane load proposed to allow for complete oxidation in landfill covers under Western European climate conditions and hence being suggested as a criterion for release from aftercare. The vertical distribution of gas concentrations, methane flux balances as well as stable carbon isotope studies allowed for clear process identifications. Higher inlet fluxes led to a reduction of the aerated zone, an increase in the absolute methane oxidation rate and a decline of the relative proportion of oxidized methane. For each material, a specific maximum oxidation rate was determined, which varied between 20 and 95 g CH{sub 4} m{sup -2} d{sup -1} and which was positively correlated to the air-filled porosity of the soil. Methane oxidation efficiencies and gas profile data imply a strong link between oxidation capacity and diffusive ingress of atmospheric air. For one material with elevated levels of fine particles and high organic matter content, methane production impeded the quantification of methane oxidation potentials. Regarding the design of landfill cover layers it was concluded that the magnitude of the expected methane load, the texture and expected compaction of the cover material are key variables that need to be known. Based on these, a column study can serve as an appropriate testing system to determine the methane oxidation capacity of a soil intended as landfill cover material.

  18. Detailed study of the influence of surface misorientation on the density of Anti-Phase Boundaries in 3C-SiC layers grown on (001) silicon

    SciTech Connect (OSTI)

    Jiao, S. [Universite Francois Rabelais, Tours, Laboratoire de Microelectronique de Puissance, 16 rue Pierre et Marie Curie, BP 7155, 37071 Tours Cedex 2 (France); Centre de Recherche sur l'Hetero-Epitaxie et ses Applications CNRS-UPR10, rue Bernard Gregory, 06560 Valbonne (France); Zielinski, M.; Chassagne, T. [NOVASiC, Savoie Technolac, Arche Bat 4, BP 267, 73375 Le Bourget du Lac Cedex (France); Roy, S. [Saint Gobain recherche, 39 Quai Lucien Lefranc 93300 Aubervilliers cedex (France); Michaud, J. F.; Alquier, D. [Universite Francois Rabelais, Tours, Laboratoire de Microelectronique de Puissance, 16 rue Pierre et Marie Curie, BP 7155, 37071 Tours Cedex 2 (France); Portail, M. [Centre de Recherche sur l'Hetero-Epitaxie et ses Applications CNRS-UPR10, rue Bernard Gregory, 06560 Valbonne (France)

    2010-11-01T23:59:59.000Z

    In this work we investigated the influence of the Si substrate misorientation and 3C-SiC film thickness on the density of Anti-Phase Boundaries, in order to better understand the mechanism of antiphase domain annihilation. The two highlights in our work are the utilization of [001] orientated Si on-axis wafer with spherical dimples, which gave us access to a continuum of off-cut angles (0 deg. to {approx}11 deg.) and directions, and the deposition of elongated silicon islands on the surface of 3C-SiC epilayers, which improved the detection of APDs by analysis of Scanning Electron Microscopy images. We found that for a given layer thickness the relative surface occupation of one domain increases with the off-cut angle value, leading to single domain film up to a certain angle. This critical value is reduced as the film is thickened.

  19. Heat capacity of liquids: an approach from the solid phase

    E-Print Network [OSTI]

    Kostya Trachenko

    2008-08-20T23:59:59.000Z

    We calculate the energy and heat capacity of a liquid on the basis of its elastic properties and vibrational states. The experimental decrease of liquid heat capacity with temperature is attributed to the increasing loss of two transverse modes with frequency $\\omegaliquid relaxation time. In a simple model, liquid heat capacity is related to viscosity and is compared with the experimental data of mercury. We also calculate the vibrational energy of a quantum liquid, and show that transverse phonons can not be excited in the low-temperature limit. Finally, we discuss the implications of the proposed approach to liquids for the problem of glass transition.

  20. DEVELOPMENT OF A 400 LEVEL 3C CLAMPED DOWNHOLE SEISMIC RECEIVER ARRAY FOR 3D BOREHOLE SEISMIC IMAGING OF GAS RESERVOIRS

    SciTech Connect (OSTI)

    Bjorn N.P. Paulsson

    2005-03-31T23:59:59.000Z

    Borehole seismology is the highest resolution geophysical imaging technique available today to the oil and gas industry for characterization and monitoring of oil and gas reservoirs. However, the industry's ability to economically do high resolution 3D imaging of deep and complex gas reservoirs using borehole seismology is currently hampered by the lack of the acquisition technology necessary to record the large volumes of the high frequency, high signal-to-noise-ratio borehole seismic data needed to do 3D imaging. This project takes direct aim at this shortcoming by developing a 400 level 3C clamped downhole seismic receiver array, and accompanying software, for borehole seismic 3D imaging. This large borehole seismic array will remove the technical acquisition barrier for recording the necessary volumes of data to do high resolution 3D VSP or 3D cross well seismic imaging. Massive 3D VSP{reg_sign} and long range Cross-Well Seismology (CWS) are two of the borehole seismic techniques that will allow the Gas industry to take the next step in their quest for higher resolution images of the gas reservoirs for the purpose of improving the recovery of the natural gas resources. Today only a fraction of the original Oil or Gas in place is produced when reservoirs are considered depleted. This is primarily due to our lack of understanding of the detailed compartmentalization of the oil and gas reservoirs. The 400 level 3C borehole seismic receiver array will allow for the economic use of 3D borehole seismic imaging for reservoir characterization and monitoring by allowing the economic recording of the required large data volumes that have a sufficiently dense spatial sampling. By using 3C surface seismic or 3C borehole seismic sources the 400 level receiver arrays will furthermore allow 3D reservoir imaging using 9C data. The 9C borehole seismic data will provide P, SH and SV information for imaging of the complex deep gas reservoirs and allow quantitative prediction of the rock and the fluid types. The data quality and the data volumes from a 400 level 3C array will allow us to develop the data processing technology necessary for high resolution reservoir imaging.

  1. Development of a 400 Level 3C Clamped Downhole Seismic Receiver Array for 3D Borehole Seismic Imaging of Gas Reservoirs

    SciTech Connect (OSTI)

    Bjorn N. P. Paulsson

    2005-09-30T23:59:59.000Z

    Borehole seismology is the highest resolution geophysical imaging technique available today to the oil and gas industry for characterization and monitoring of oil and gas reservoirs. However, the industry's ability to economically do high resolution 3D imaging of deep and complex gas reservoirs using borehole seismology is currently hampered by the lack of the acquisition technology necessary to record the large volumes of the high frequency, high signal-to-noise-ratio borehole seismic data needed to do 3D imaging. This project takes direct aim at this shortcoming by developing a 400 level 3C clamped downhole seismic receiver array, and accompanying software, for borehole seismic 3D imaging. This large borehole seismic array will remove the technical acquisition barrier for recording the necessary volumes of data to do high resolution 3D VSP or 3D cross well seismic imaging. Massive 3D VSP{reg_sign} and long range Cross-Well Seismology (CWS) are two of the borehole seismic techniques that will allow the Gas industry to take the next step in their quest for higher resolution images of the gas reservoirs for the purpose of improving the recovery of the natural gas resources. Today only a fraction of the original Oil or Gas in place is produced when reservoirs are considered depleted. This is primarily due to our lack of understanding of the detailed compartmentalization of the oil and gas reservoirs. The 400 level 3C borehole seismic receiver array will allow for the economic use of 3D borehole seismic imaging for reservoir characterization and monitoring by allowing the economic recording of the required large data volumes that have a sufficiently dense spatial sampling. By using 3C surface seismic or 3C borehole seismic sources the 400 level receiver arrays will furthermore allow 3D reservoir imaging using 9C data. The 9C borehole seismic data will provide P, SH and SV information for imaging of the complex deep gas reservoirs and allow quantitative prediction of the rock and the fluid types. The data quality and the data volumes from a 400 level 3C array will allow us to develop the data processing technology necessary for high resolution reservoir imaging.

  2. Development of a 400 Level 3C Clamped Downhole Seismic Receiver Array for 3D Borehole Seismic Imaging of Gas Reservoirs

    SciTech Connect (OSTI)

    Bjorn N.P Paulsson

    2006-05-05T23:59:59.000Z

    Borehole seismology is the highest resolution geophysical imaging technique available today to the oil and gas industry for characterization and monitoring of oil and gas reservoirs. However, the industry's ability to economically do high resolution 3D imaging of deep and complex gas reservoirs using borehole seismology is currently hampered by the lack of the acquisition technology necessary to record the large volumes of the high frequency, high signal-to-noise-ratio borehole seismic data needed to do 3D imaging. This project takes direct aim at this shortcoming by developing a 400 level 3C clamped downhole seismic receiver array, and accompanying software, for borehole seismic 3D imaging. This large borehole seismic array will remove the technical acquisition barrier for recording the necessary volumes of data to do high resolution 3D VSP or 3D cross well seismic imaging. Massive 3D VSP{reg_sign} and long range Cross-Well Seismology (CWS) are two of the borehole seismic techniques that will allow the Gas industry to take the next step in their quest for higher resolution images of the gas reservoirs for the purpose of improving the recovery of the natural gas resources. Today only a fraction of the original Oil or Gas in place is produced when reservoirs are considered depleted. This is primarily due to our lack of understanding of the detailed compartmentalization of the oil and gas reservoirs. The 400 level 3C borehole seismic receiver array will allow for the economic use of 3D borehole seismic imaging for reservoir characterization and monitoring by allowing the economic recording of the required large data volumes that have a sufficiently dense spatial sampling. By using 3C surface seismic or 3C borehole seismic sources the 400 level receiver arrays will furthermore allow 3D reservoir imaging using 9C data. The 9C borehole seismic data will provide P, SH and SV information for imaging of the complex deep gas reservoirs and allow quantitative prediction of the rock and the fluid types. The data quality and the data volumes from a 400 level 3C array will allow us to develop the data processing technology necessary for high resolution reservoir imaging.

  3. Development of a 400 Level 3C Clamped Downhole Seismic Receiver Array for 3D Borehole Seismic Imaging of Gas Reservoirs

    SciTech Connect (OSTI)

    Bjorn N.P. Paulsson

    2005-08-21T23:59:59.000Z

    Borehole seismology is the highest resolution geophysical imaging technique available today to the oil and gas industry for characterization and monitoring of oil and gas reservoirs. However, the industry's ability to economically do high resolution 3D imaging of deep and complex gas reservoirs using borehole seismology is currently hampered by the lack of the acquisition technology necessary to record the large volumes of the high frequency, high signal-to-noise-ratio borehole seismic data needed to do 3D imaging. This project takes direct aim at this shortcoming by developing a 400 level 3C clamped downhole seismic receiver array, and accompanying software, for borehole seismic 3D imaging. This large borehole seismic array will remove the technical acquisition barrier for recording the necessary volumes of data to do high resolution 3D VSP or 3D cross well seismic imaging. Massive 3D VSP{reg_sign} and long range Cross-Well Seismology (CWS) are two of the borehole seismic techniques that will allow the Gas industry to take the next step in their quest for higher resolution images of the gas reservoirs for the purpose of improving the recovery of the natural gas resources. Today only a fraction of the original Oil or Gas in place is produced when reservoirs are considered depleted. This is primarily due to our lack of understanding of the detailed compartmentalization of the oil and gas reservoirs. The 400 level 3C borehole seismic receiver array will allow for the economic use of 3D borehole seismic imaging for reservoir characterization and monitoring by allowing the economic recording of the required large data volumes that have a sufficiently dense spatial sampling. By using 3C surface seismic or 3C borehole seismic sources the 400 level receiver arrays will furthermore allow 3D reservoir imaging using 9C data. The 9C borehole seismic data will provide P, SH and SV information for imaging of the complex deep gas reservoirs and allow quantitative prediction of the rock and the fluid types. The data quality and the data volumes from a 400 level 3C array will allow us to develop the data processing technology necessary for high resolution reservoir imaging.

  4. Psychological Characteristics and Adjustment in Caregivers of Children with Severe Neurodisability with Chronic Pulmunary Symptoms

    E-Print Network [OSTI]

    Blucker, Ryan Thomas

    2011-08-08T23:59:59.000Z

    -reported experiences related to general health and psychological adjustment. It was hypothesized that this specific group of caregivers would report relatively high levels of distress related to disability severity and resulting respiratory care management plan...

  5. Is the hourly data I get from NREL's PV Watts program adjusted...

    Open Energy Info (EERE)

    get from NREL's PV Watts program adjusted for daylight savings time. Home I take the hourly AC output numbers and apply them to a program I built that assigns a dollar value to the...

  6. E-Print Network 3.0 - adjusted d-dimer cut-off Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    44 Study of the Response Function of the CUORE Bolometers towards a Neutrinoless Double Beta Decay Summary: sampling and cut-off frequency for each bolometer and adjust them...

  7. 31.01.01.V1.05 SALARY ADJUSTMENTS FOR INTERNATIONAL ASSIGNMENTS

    E-Print Network [OSTI]

    administered by the employee, or other measure of increased responsibility resulting from the assignment. 1 associated with a change in position. 2.00 GUIDELINES AND PROCEDURES 2.01 All salary adjustments

  8. Essays in Applied Macroeconomics: Asymmetric Price Adjustment, Exchange Rate and Treatment Effect

    E-Print Network [OSTI]

    Gu, Jingping

    2009-05-15T23:59:59.000Z

    -varying volatility of gasoline price disturbances is an important feature of the data, and when we allow for asymmetric GARCH errors and investigate the system wide impulse response function, we find evidence of asymmetric adjustment to crude oil price changes...

  9. Assessment of Dancoff adjusted Wigner-Seitz cells for self-shielding LWR lattices

    E-Print Network [OSTI]

    Roomy, Thomas Hayward

    2012-01-01T23:59:59.000Z

    The objective of this thesis was to assess the effectiveness of using a Wigner-Seitz (WS) cell with an adjusted moderator thickness to produce more accurate resonance self-shielded cross sections for light water reactor ...

  10. The relation between family functioning and psychological adjustment in children with asthma and children with diabetes

    E-Print Network [OSTI]

    Fontaine, Eve Nicole

    2007-04-25T23:59:59.000Z

    The goals of this study were to evaluate the relationships among family functioning, psychological adjustment, and health-related quality of life in children with asthma and children with diabetes. A secondary goal of this study was to examine...

  11. Design of an adjustable arm-supported table that is counterbalanced against gravity

    E-Print Network [OSTI]

    Olle, Chase R

    2013-01-01T23:59:59.000Z

    A prototype system was designed and constructed that used a wall-mounted, counterbalanced mechanical arm to support a workspace that can be adjusted for position. Possible applications of the system include use as a writing ...

  12. Information Capacity of an Energy Harvesting Sensor Node

    E-Print Network [OSTI]

    Viswanath, Pramod

    practical architectures. Our main result is the characterization of the Shannon capacity. INTRODUCTION Sensor nodes are often deployed for monitoring a random field. These nodes are characterized by limited battery power, computational resources and storage space. Once deployed, the battery

  13. Capacity Requirements to Support Inter-Balancing Area Wind Delivery

    SciTech Connect (OSTI)

    Kirby, B.; Milligan, M.

    2009-07-01T23:59:59.000Z

    Paper examines the capacity requirements that arise as wind generation is integrated into the power system and how those requirements change depending on where the wind energy is delivered.

  14. Increasing Freeway Merge Capacity Through On-Ramp Metering

    E-Print Network [OSTI]

    Rudjanakanoknad, Jittichai

    2005-01-01T23:59:59.000Z

    Hall, F. L. and Agywmang-Duah, K. (1991), Freeway capacity1990; Hall and Agyemang-Duah, 1991). As explained below,Later, Hall and Agyemang- Duah (1991) studied a freeway

  15. Minimum Cost Capacity Installation for Multicommodity Network Flows \\Lambda

    E-Print Network [OSTI]

    Bienstock, Daniel

    Capacity Installation (MCCI) problem. Applications of MCCI are commonly seen in the design for MCCI and then we transform this for­ mulation to a lower dimensional space by projecting out all

  16. Global Installed Capacity of Coal Fired Power Generation to Reach...

    Open Energy Info (EERE)

    Global Installed Capacity of Coal Fired Power Generation to Reach 2,057.6 GW by 2019 Home > Groups > Increase Natural Gas Energy Efficiency John55364's picture Submitted by...

  17. Capacity planning and admission control policies for intensive care units

    E-Print Network [OSTI]

    Chaiwanon, Wongsakorn

    2010-01-01T23:59:59.000Z

    Poor management of the patient flow in intensive care units (ICUs) causes service rejections and presents significant challenges from the standpoint of capacity planning and management in ICUs. This thesis reports on the ...

  18. High capacity stabilized complex hydrides for hydrogen storage

    DOE Patents [OSTI]

    Zidan, Ragaiy; Mohtadi, Rana F; Fewox, Christopher; Sivasubramanian, Premkumar

    2014-11-11T23:59:59.000Z

    Complex hydrides based on Al(BH.sub.4).sub.3 are stabilized by the presence of one or more additional metal elements or organic adducts to provide high capacity hydrogen storage material.

  19. Saudi production capacity climbing to 10 million b/d

    SciTech Connect (OSTI)

    Not Available

    1994-07-11T23:59:59.000Z

    Saudi Arabia this year is completing its expansion of production capacity and developing recent discoveries to enhance export flexibility. The 3 million b/d capacity expansion to 10 million b/d, announced in 1989, is on target for completion by year end 1994. Most of the effort involves restoration of mothballed production equipment and installation of several gas-oil separation plants (GOSPs) in existing fields. But Saudi Arabian Oil Co. (Saudi Aramco) also this year will start up production of extra-light oil from a new field in the central part of the kingdom. Start-up of Hawtah area production demonstrates success of an oil search Aramco began after receiving exclusive exploration rights to nearly all of Saudi Arabia's prospective area in 1986. From new fields and traditional producing areas, therefore, Saudi Arabia has the potential to expand production capacity beyond 10 million b/d. The paper describes the development of the extra capacity.

  20. Development of large-capacity gas-insulated transformer

    SciTech Connect (OSTI)

    Takahashi, E.; Tanaka, K. [Tokyo Electric Power Co., Ltd. (Japan)] [Tokyo Electric Power Co., Ltd. (Japan); Toda, K.; Ikeda, M.; Teranishi, T.; Inaba, M.; Yanari, T. [Toshiba Corp., Kawasaki (Japan)] [Toshiba Corp., Kawasaki (Japan)

    1996-04-01T23:59:59.000Z

    Concentrations of population and business activities result in high electricity demand in urban areas. This requires the construction of large-capacity underground substations. Oilless, non-flammable and non-explosive equipment is recommended for underground substations. Therefore, several types of large-capacity gas-insulated transformer have been developed. Because the gas forced cooling type was considered to be available up to approximately 60 MVA, all of these gas-insulated transformers are liquid cooled. But the liquid cooling type has the disadvantage of a complex structure for liquid cooling. For this reason, the authors have been studying the development of a simple design for a gas forced cooling, large-capacity gas-insulated transformer. This paper discusses research and development of cooling and insulation technology for a large-capacity gas-insulated transformer and the development of a 275 kV, 300 MVA gas-insulated transformer.

  1. Design and Evaluation of Novel High Capacity Cathode Materials...

    Broader source: Energy.gov (indexed) [DOE]

    the reaction is, in turn, intercalated into the negative electrode (i.e. graphite, graphene composites, intermetallics, Si-C composites, high-capacity TiO 2 (B bronze), TiO 2...

  2. Capacity planning and change management in an aerospace overhaul cell

    E-Print Network [OSTI]

    Walker, David, M.B.A. Massachusetts Institute of Technology

    2013-01-01T23:59:59.000Z

    Purpose - This thesis analyzes the transformation of the Small Components Cell in Pratt & Whitney's aftermarket division through lean manufacturing techniques. The thesis focuses on use of a labor capacity planning model, ...

  3. Development of operations based long range network capacity planning models

    E-Print Network [OSTI]

    Wilson, Cynthia M. (Cynthia Marie)

    2011-01-01T23:59:59.000Z

    Planning for vaccines manufacturing capacity is both a complex task requiring many inputs and an important function of manufacturers to ensure the supply of vaccines that prevent life-threatening illnesses. This thesis ...

  4. Creative capacity building in post-conflict Uganda

    E-Print Network [OSTI]

    Taha, Kofi A. (Kofi Abdul Malik)

    2011-01-01T23:59:59.000Z

    Creative Capacity Building (CCB) is a methodology that emphasizes the ability of people living in poverty to create livelihood technologies, i.e., machines and tools that increase income, improve health and safety, decrease ...

  5. The multicast capacity region of large wireless networks

    E-Print Network [OSTI]

    Shah, Devavrat

    We study the problem of determining the multicast capacity region of a wireless network of n nodes randomly located in an extended area and communicating with each other over Gaussian fading channels. We obtain an explicit ...

  6. Predictive capacity planning modeling with tactical and strategic applications

    E-Print Network [OSTI]

    Zeppieri, Michael A. (Michael Anthony), 1975-

    2004-01-01T23:59:59.000Z

    The focus of my internship was the development of a predictive capacity planning model to characterize the storage requirements and space utilization for Amazon's Campbellsville (SDF) Fulfillment Center (FC). Amazon currently ...

  7. Real options approach to capacity planning under uncertainty

    E-Print Network [OSTI]

    Mittal, Geetanjali, 1979-

    2004-01-01T23:59:59.000Z

    This thesis highlights the effectiveness of Real Options Analysis (ROA) in capacity planning decisions for engineering projects subject to uncertainty. This is in contrast to the irreversible decision-making proposed by ...

  8. Nitrogen expander cycles for large capacity liquefaction of natural gas

    SciTech Connect (OSTI)

    Chang, Ho-Myung; Park, Jae Hoon; Gwak, Kyung Hyun [Hong Ik University, Department of Mechanical Engineering, Seoul, 121-791 (Korea, Republic of); Choe, Kun Hyung [Korea Gas Corporation, Incheon, 406-130 (Korea, Republic of)

    2014-01-29T23:59:59.000Z

    Thermodynamic study is performed on nitrogen expander cycles for large capacity liquefaction of natural gas. In order to substantially increase the capacity, a Brayton refrigeration cycle with nitrogen expander was recently added to the cold end of the reputable propane pre-cooled mixed-refrigerant (C3-MR) process. Similar modifications with a nitrogen expander cycle are extensively investigated on a variety of cycle configurations. The existing and modified cycles are simulated with commercial process software (Aspen HYSYS) based on selected specifications. The results are compared in terms of thermodynamic efficiency, liquefaction capacity, and estimated size of heat exchangers. The combination of C3-MR with partial regeneration and pre-cooling of nitrogen expander cycle is recommended to have a great potential for high efficiency and large capacity.

  9. Developing A New High Capacity Anode With Long Cycle Life

    Broader source: Energy.gov (indexed) [DOE]

    more than 1000 mAhg with poor cyleability. * The formation of Sn x Co y C z and MO composite could lead to the increase in the capacity, reduce the amount of cobalt in the...

  10. Dynamics of social contagions with limited contact capacity

    E-Print Network [OSTI]

    Wang, Wei; Zhu, Yu-Xiao; Tang, Ming; Zhang, Yi-Cheng

    2015-01-01T23:59:59.000Z

    Individuals are always limited by some inelastic resources, such as time and energy, which restrict them to dedicate to social interaction and limit their contact capacity. Contact capacity plays an important role in dynamics of social contagions, which so far has eluded theoretical analysis. In this paper, we first propose a non-Markovian model to understand the effects of contact capacity on social contagions, in which each individual can only contact and transmit the information to a finite number of neighbors. We then develop a heterogeneous edge-based compartmental theory for this model, and a remarkable agreement with simulations is obtained. Through theory and simulations, we find that enlarging the contact capacity makes the network more fragile to behavior spreading. Interestingly, we find that both the continuous and discontinuous dependence of the final adoption size on the information transmission probability can arise. And there is a crossover phenomenon between the two types of dependence. More ...

  11. Fail Safe Design for Large Capacity Lithium-ion Batteries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fail Safe Design for Large Capacity Lithium-ion Batteries NREL Commercialization & Tech Transfer Webinar March 27, 2011 Gi-Heon Kim gi-heon.kim@nrel.gov John Ireland, Kyu-Jin Lee,...

  12. Why Are We Talking About Capacity Markets? (Presentation)

    SciTech Connect (OSTI)

    Milligan, M.

    2011-06-01T23:59:59.000Z

    Capacity markets represent a new and novel way to achieve greater economic use of variable generation assets such as wind and solar, and this concept is discussed in this presentation.

  13. Creative agencies : a model for building community capacity

    E-Print Network [OSTI]

    Ramaccia, Elizabeth M. (Elizabeth Marie)

    2011-01-01T23:59:59.000Z

    This research investigates how existing initiatives based in artistic and non-artistic disciplines build indigenous capacity for leadership in disenfranchised communities through the application of the creative process. ...

  14. Strategies for Sharing Bottleneck Capacity among Buses and Cars

    E-Print Network [OSTI]

    Guler, Sukran Ilgin

    2012-01-01T23:59:59.000Z

    at first, since bus-car sharing strategies for facilities ofsharing the middle link’s median lane between cars andfor Sharing Bottleneck Capacity among Buses and Cars by

  15. ,"New York Natural Gas Underground Storage Capacity (MMcf)"

    U.S. Energy Information Administration (EIA) Indexed Site

    ,,"(202) 586-8800",,,"2262015 9:17:17 AM" "Back to Contents","Data 1: New York Natural Gas Underground Storage Capacity (MMcf)" "Sourcekey","N5290NY2"...

  16. An Efficient Algorithm for Computing Robust Minimum Capacity st Cuts

    E-Print Network [OSTI]

    2008-04-03T23:59:59.000Z

    Apr 3, 2008 ... under data uncertainty such as in open-pit mining or scheduling jobs on ..... maximum flow problem in that arcs e1,e2, ··· ,ei had their capacities ...

  17. "Assessment of the Adequacy of Natural Gas Pipeline Capacity...

    Broader source: Energy.gov (indexed) [DOE]

    its "Assessment of the Adequacy of Natural Gas Pipeline Capacity in the Northeast United States" report. The report is now available for downloading. In 2005-06, the Office of...

  18. Offshore Wind Energy Market Installed Capacity is Anticipated...

    Open Energy Info (EERE)

    Offshore Wind Energy Market Installed Capacity is Anticipated to Reach 52,120.9 MW by 2022 Home > Groups > Renewable Energy RFPs Wayne31jan's picture Submitted by Wayne31jan(150)...

  19. Seismic Capacity of Threaded, Brazed, and Grooved Pipe Joints

    Office of Environmental Management (EM)

    SEISMIC CAPACITY OF THREADED, BRAZED AND GROOVED PIPE JOINTS Brent Gutierrez, PhD, PE George Antaki, PE, F.ASME DOE NPH Conference October 25-26, 2011 Motivation * Understand the...

  20. Tracking Progress Last updated 10/7/2013 Installed Capacity 1

    E-Print Network [OSTI]

    Tracking Progress Last updated 10/7/2013 Installed Capacity 1 Installed Capacity The capacities 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 Capacity (MW) Wind Solar Small Hydro Large Hydro Reporting #12;Tracking Progress Last updated 10/7/2013 Installed Capacity 2 Table 1 provides the data

  1. Uncertainty-based Estimation of the Secure Range for ISO New England Dynamic Interchange Adjustment

    SciTech Connect (OSTI)

    Etingov, Pavel V.; Makarov, Yuri V.; Wu, Di; Hou, Zhangshuan; Sun, Yannan; Maslennikov, S.; Luo, Xiaochuan; Zheng, T.; George, S.; Knowland, T.; Litvinov, E.; Weaver, S.; Sanchez, E.

    2014-04-14T23:59:59.000Z

    The paper proposes an approach to estimate the secure range for dynamic interchange adjustment, which assists system operators in scheduling the interchange with neighboring control areas. Uncertainties associated with various sources are incorporated. The proposed method is implemented in the dynamic interchange adjustment (DINA) tool developed by Pacific Northwest National Laboratory (PNNL) for ISO New England. Simulation results are used to validate the effectiveness of the proposed method.

  2. Denial of Service attacks: path reconstruction for IP traceback using Adjusted Probabilistic Packet Marking

    E-Print Network [OSTI]

    Dube, Raghav

    2005-02-17T23:59:59.000Z

    DENIAL OF SERVICE ATTACKS: PATH RECONSTRUCTION FOR IP TRACEBACK USING ADJUSTED PROBABILISTIC PACKET MARKING A Thesis by RAGHAV DUBE Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE December 2004 Major Subject: Electrical Engineering DENIAL OF SERVICE ATTACKS: PATH RECONSTRUCTION FOR IP TRACEBACK USING ADJUSTED PROBABILISTIC PACKET MARKING A Thesis by RAGHAV DUBE Submitted to Texas A&M University...

  3. Tri-Laboratory Linux Capacity Cluster 2007 SOW

    SciTech Connect (OSTI)

    Seager, M

    2007-03-22T23:59:59.000Z

    The Advanced Simulation and Computing (ASC) Program (formerly know as Accelerated Strategic Computing Initiative, ASCI) has led the world in capability computing for the last ten years. Capability computing is defined as a world-class platform (in the Top10 of the Top500.org list) with scientific simulations running at scale on the platform. Example systems are ASCI Red, Blue-Pacific, Blue-Mountain, White, Q, RedStorm, and Purple. ASC applications have scaled to multiple thousands of CPUs and accomplished a long list of mission milestones on these ASC capability platforms. However, the computing demands of the ASC and Stockpile Stewardship programs also include a vast number of smaller scale runs for day-to-day simulations. Indeed, every 'hero' capability run requires many hundreds to thousands of much smaller runs in preparation and post processing activities. In addition, there are many aspects of the Stockpile Stewardship Program (SSP) that can be directly accomplished with these so-called 'capacity' calculations. The need for capacity is now so great within the program that it is increasingly difficult to allocate the computer resources required by the larger capability runs. To rectify the current 'capacity' computing resource shortfall, the ASC program has allocated a large portion of the overall ASC platforms budget to 'capacity' systems. In addition, within the next five to ten years the Life Extension Programs (LEPs) for major nuclear weapons systems must be accomplished. These LEPs and other SSP programmatic elements will further drive the need for capacity calculations and hence 'capacity' systems as well as future ASC capability calculations on 'capability' systems. To respond to this new workload analysis, the ASC program will be making a large sustained strategic investment in these capacity systems over the next ten years, starting with the United States Government Fiscal Year 2007 (GFY07). However, given the growing need for 'capability' systems as well, the budget demands are extreme and new, more cost effective ways of fielding these systems must be developed. This Tri-Laboratory Linux Capacity Cluster (TLCC) procurement represents the ASC first investment vehicle in these capacity systems. It also represents a new strategy for quickly building, fielding and integrating many Linux clusters of various sizes into classified and unclassified production service through a concept of Scalable Units (SU). The programmatic objective is to dramatically reduce the overall Total Cost of Ownership (TCO) of these 'capacity' systems relative to the best practices in Linux Cluster deployments today. This objective only makes sense in the context of these systems quickly becoming very robust and useful production clusters under the crushing load that will be inflicted on them by the ASC and SSP scientific simulation capacity workload.

  4. GASCAP: Wellhead Gas Productive Capacity Model documentation, June 1993

    SciTech Connect (OSTI)

    Not Available

    1993-07-01T23:59:59.000Z

    The Wellhead Gas Productive Capacity Model (GASCAP) has been developed by EIA to provide a historical analysis of the monthly productive capacity of natural gas at the wellhead and a projection of monthly capacity for 2 years into the future. The impact of drilling, oil and gas price assumptions, and demand on gas productive capacity are examined. Both gas-well gas and oil-well gas are included. Oil-well gas productive capacity is estimated separately and then combined with the gas-well gas productive capacity. This documentation report provides a general overview of the GASCAP Model, describes the underlying data base, provides technical descriptions of the component models, diagrams the system and subsystem flow, describes the equations, and provides definitions and sources of all variables used in the system. This documentation report is provided to enable users of EIA projections generated by GASCAP to understand the underlying procedures used and to replicate the models and solutions. This report should be of particular interest to those in the Congress, Federal and State agencies, industry, and the academic community, who are concerned with the future availability of natural gas.

  5. Determining the Capacity Value of Wind: An Updated Survey of Methods and Implementation; Preprint

    SciTech Connect (OSTI)

    Milligan, M.; Porter, K.

    2008-06-01T23:59:59.000Z

    This paper summarizes state and regional studies examining the capacity value of wind energy, how different regions define and implement capacity reserve requirements, and how wind energy is defined as a capacity resource in those regions.

  6. Pipeline capacity trading could be more efficient if{hor_ellipsis}

    SciTech Connect (OSTI)

    Roth, R.

    1995-12-31T23:59:59.000Z

    This paper discusses the efficiency of pipeline capacity trading. The characteristics of efficient markets, southwest U.S. capacity market, and a solution to excess capacity burden are discussed. It is concluded that capacity trading could be more efficient if the following were to occur: parity of capacity sales was achieved; timely reporting of EBBs of price, volume, and path was mandatory; rate caps on released capacity were removed; and market based rates are established for pipelines.

  7. Sequence Logos, Machine/Channel Capacity, Maxwell's Demon, and Molecular Computers: a Review of the

    E-Print Network [OSTI]

    Schneider, Thomas D.

    Sequence Logos, Machine/Channel Capacity, Maxwell's Demon, and Molecular Computers: a Review. D. Schneider. Sequence logos, machine/channel capacity, Maxwell's demon, and molecular computers

  8. Thermodynamic and Kinetic Properties of Intrinsic Defects and Mg Transmutants in 3C-SiC Determined by Density Functional Theory

    SciTech Connect (OSTI)

    Hu, Shenyang Y.; Setyawan, Wahyu; Van Ginhoven, Renee M.; Jiang, Weilin; Henager, Charles H.; Kurtz, Richard J.

    2014-02-20T23:59:59.000Z

    Density functional theory (DFT) is used to calculate the thermodynamic and kinetic properties of transmutant Mg in 3C-SiC due to high-energy neutron irradiation associated with the fusion nuclear environment. The formation and binding energies of intrinsic defects, Mg-related defects, and clusters in 3C-SiC are systematically calculated. The minimum energy paths and activation energies during point defect migration and small cluster evolution are studied using a generalized solid-state elastic band (G-SSNEB) method with DFT energy calculations. Stable defect structures and possible defect migration mechanisms are identified. The evolution of binding energies during Mg2Si formation demonstrates that the formation of Mg2Si needs to overcome a critical nucleus size and nucleation barrier. It is also found that a compressive stress field exists around the Mg2Si nucleus. These data are important inputs in meso- and macro-scale modeling and experiments to understand and predict the impact of Mg on phase stability, microstructure evolution, and performance of SiC and SiC-based materials during long-term neutron exposures.

  9. Jet-ISM Interaction in the Radio Galaxy 3C293: Jet-driven Shocks Heat ISM to Power X-ray and Molecular H2 emission

    E-Print Network [OSTI]

    Lanz, Lauranne; Evans, Daniel; Appleton, Philip N; Guillard, Pierre; Emonts, Bjorn

    2015-01-01T23:59:59.000Z

    We present a 70ks Chandra observation of the radio galaxy 3C293. This galaxy belongs to the class of molecular hydrogen emission galaxies (MOHEGs) that have very luminous emission from warm molecular hydrogen. In radio galaxies, the molecular gas appears to be heated by jet-driven shocks, but exactly how this mechanism works is still poorly understood. With Chandra, we observe X-ray emission from the jets within the host galaxy and along the 100 kpc radio jets. We model the X-ray spectra of the nucleus, the inner jets, and the X-ray features along the extended radio jets. Both the nucleus and the inner jets show evidence of 10^7 K shock-heated gas. The kinetic power of the jets is more than sufficient to heat the X-ray emitting gas within the host galaxy. The thermal X-ray and warm H2 luminosities of 3C293 are similar, indicating similar masses of X-ray hot gas and warm molecular gas. This is consistent with a picture where both derive from a multiphase, shocked interstellar medium (ISM). We find that radio-l...

  10. Valence and conduction band alignment at ScN interfaces with 3C-SiC (111) and 2H-GaN (0001)

    SciTech Connect (OSTI)

    King, Sean W., E-mail: sean.king@intel.com [Department of Materials Science and Engineering, North Carolina State University, Raleigh, North Carolina 27695 (United States); Logic Technology Development, Intel Corporation, Hillsboro, Oregon 97124 (United States); Nemanich, Robert J. [Department of Physics, North Carolina State University, Raleigh, North Carolina 27695 (United States); Department of Physics, Arizona State University, Tempe, Arizona 85281 (United States); Davis, Robert F. [Department of Materials Science and Engineering, North Carolina State University, Raleigh, North Carolina 27695 (United States); Department of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213 (United States)

    2014-08-25T23:59:59.000Z

    In order to understand and predict the behavior of future scandium nitride (ScN) semiconductor heterostructure devices, we have utilized in situ x-ray and ultra-violet photoelectron spectroscopy to determine the valence band offset (VBO) present at ScN/3C-SiC (111) and 2H-GaN (0001)/ScN (111) interfaces formed by ammonia gas source molecular beam epitaxy. The ScN/3C-SiC (111) VBO was dependent on the ScN growth temperature and resistivity. VBOs of 0.4?±?0.1 and 0.1?±?0.1?eV were, respectively, determined for ScN grown at 925?°C (low resistivity) and 800?°C (high resistivity). Using the band-gaps of 1.6?±?0.2 and 1.4?±?0.2?eV previously determined by reflection electron energy loss spectroscopy for the 925 and 800?°C ScN films, the respective conduction band offsets (CBO) for these interfaces were 0.4?±?0.2 and 0.9?±?0.2?eV. For a GaN (0001) interface with 925?°C ScN (111), the VBO and CBO were similarly determined to be 0.9?±?0.1 and 0.9?±?0.2?eV, respectively.

  11. Plug and Process Loads Capacity and Power Requirements Analysis

    SciTech Connect (OSTI)

    Sheppy, M.; Gentile-Polese, L.

    2014-09-01T23:59:59.000Z

    This report addresses gaps in actionable knowledge that would help reduce the plug load capacities designed into buildings. Prospective building occupants and real estate brokers lack accurate references for plug and process load (PPL) capacity requirements, so they often request 5-10 W/ft2 in their lease agreements. Limited initial data, however, suggest that actual PPL densities in leased buildings are substantially lower. Overestimating PPL capacity leads designers to oversize electrical infrastructure and cooling systems. Better guidance will enable improved sizing and design of these systems, decrease upfront capital costs, and allow systems to operate more energy efficiently. The main focus of this report is to provide industry with reliable, objective third-party guidance to address the information gap in typical PPL densities for commercial building tenants. This could drive changes in negotiations about PPL energy demands.

  12. Surface Tension Adjustment in a Pseudo-Potential Lattice Boltzmann Model

    E-Print Network [OSTI]

    Hu, Anjie; Uddin, Rizwan

    2014-01-01T23:59:59.000Z

    Pseudo-potential lattice Boltzmann models have been widely applied in many multiphase simulations. However, most of these models still suffer from some drawbacks such as spurious velocities and untunable surface tension. In this paper, we aim to discuss the surface tension of a popular pseudo-potential model proposed by Kupershtokh et al., which has attracted much attention due to its simplicity and stability. The influence of a parameter on the surface tension in the model is analyzed. Based on the analysis, we proposed a method to adjust surface tension by changing the parameter in the model. However, the density distribution and the stability of the model also depend on the parameter. To adjust the surface tension independently, the pressure tensor modifying method is introduced and numerically tested. The simulation results show that, by applying the pressure tensor modifying method, the surface tension can be adjusted with little influence on the stability and density distributions.

  13. Additivity of Entangled Channel Capacity for Quantum Input States

    E-Print Network [OSTI]

    V. P. Belavkin; X. Dai

    2007-02-10T23:59:59.000Z

    An elementary introduction into algebraic approach to unified quantum information theory and operational approach to quantum entanglement as generalized encoding is given. After introducing compound quantum state and two types of informational divergences, namely, Araki-Umegaki (a-type) and of Belavkin-Staszewski (b-type) quantum relative entropic information, this paper treats two types of quantum mutual information via entanglement and defines two types of corresponding quantum channel capacities as the supremum via the generalized encodings. It proves the additivity property of quantum channel capacities via entanglement, which extends the earlier results of V. P. Belavkin to products of arbitrary quantum channels for quantum relative entropy of any type.

  14. World nuclear capacity and fuel cycle requirements, November 1993

    SciTech Connect (OSTI)

    Not Available

    1993-11-30T23:59:59.000Z

    This analysis report presents the current status and projections of nuclear capacity, generation, and fuel cycle requirements for all countries in the world using nuclear power to generate electricity for commercial use. Long-term projections of US nuclear capacity, generation, fuel cycle requirements, and spent fuel discharges for three different scenarios through 2030 are provided in support of the Department of Energy`s activities pertaining to the Nuclear Waste Policy Act of 1982 (as amended in 1987). The projections of uranium requirements also support the Energy Information Administration`s annual report, Domestic Uranium Mining and Milling Industry: Viability Assessment.

  15. Method of increasing the sulfation capacity of alkaline earth sorbents

    DOE Patents [OSTI]

    Shearer, J.A.; Turner, C.B.; Johnson, I.

    1980-03-13T23:59:59.000Z

    A system and method for increasing the sulfation capacity of alkaline earth carbonates to scrub sulfur dioxide produced during the fluidized bed combustion of coal in which partially sulfated alkaline earth carbonates are hydrated in a fluidized bed to crack the sulfate coating and convert the alkaline earth oxide to the hydroxide. Subsequent dehydration of the sulfate-hydroxide to a sulfate-oxide particle produces particles having larger pore size, increased porosity, decreased grain size and additional sulfation capacity. A continuous process is disclosed.

  16. On the heat capacity of Ce{sub 3}Al

    SciTech Connect (OSTI)

    Singh, Durgesh, E-mail: durgeshkushinagar@gmail.com; Samatham, S. Shanmukharao, E-mail: durgeshkushinagar@gmail.com; Venkateshwarlu, D., E-mail: durgeshkushinagar@gmail.com; Gangrade, Mohan, E-mail: durgeshkushinagar@gmail.com; Ganesan, V., E-mail: durgeshkushinagar@gmail.com [UGC-DAE Consortium for Scientific Research, University Campus, Khandwa Road, Indore-452001, Madhya Pradesh (India)

    2014-04-24T23:59:59.000Z

    Electrical resistivity and heat capacity measurements on Cerium based dense Kondo compound Ce{sub 3}Al have been reported. Clear signatures of first order structural transition at 108K, followed by a Kondo minimum and coherence are clearly seen in resistivity. The structural transition is robust and is not affected by magnetic fields. Heat capacity measurements reveal an anomalous enhancement in the heavy fermion character upon magnetic fields. Vollhardt invariance in specific heat C(T.H) curves have been observed at T=3.7K and at H ? 6T.

  17. Accuracy of Link Capacity Estimates using Passive and Active Approaches with CapProbe

    E-Print Network [OSTI]

    Chen, Ling-Jyh

    appropriate streaming rates, while ISPs would be able to determine the capacity of their installed linksAccuracy of Link Capacity Estimates using Passive and Active Approaches with CapProbe Rohit Kapoor to estimate capacity. CapProbe combines both dispersion and end-to-end delay to estimate the capacity

  18. Tacit collusion in a non-repeated price competition game with a soft capacity constraint

    E-Print Network [OSTI]

    cost function. Key words: price competition, tacit collusion, convex cost, Bertrand Para- dox, capacity

  19. 1. Theory for Liquid Heat Capacity I ) Polynomial equation (HC_CPLEQN)

    E-Print Network [OSTI]

    Hong, Deog Ki

    1. Theory for Liquid Heat Capacity I ) Polynomial equation (HC_CPLEQN) Polynomial equation is usedJ/kg-mol.K. II ) Corresponding States Method for Liquid Heat Capacity (HC_CPLCSP) The expression basedGraw-Hill, New York, 2000 2. KDB Routines for Liquid Heat Capacity Calculation KDB liquid heat capacity

  20. High Capacity Li Ion Battery Anodes Using Ge Nanowires

    E-Print Network [OSTI]

    Cui, Yi

    High Capacity Li Ion Battery Anodes Using Ge Nanowires Candace K. Chan, Xiao Feng Zhang, and Yi Cui efficiency > 99%. Structural characterization revealed that the Ge nanowires remain intact and connected nanowire anodes are promising candidates for the development of high-energy-density lithium batteries

  1. Determining the People Capacity of a Structure May 7, 1999

    E-Print Network [OSTI]

    Mitchener, W. Garrett

    sustaining injury? Another important issue is that of comfort: how many people can be #12;t in a room, during, in an overcrowded room, might leave many people injured in the rush to exit whether or not the threat is realTeam 243 Determining the People Capacity of a Structure Team 243 May 7, 1999 1 Introduction

  2. Spent nuclear fuel project design basis capacity study

    SciTech Connect (OSTI)

    Cleveland, K.J.

    1996-09-09T23:59:59.000Z

    A parametric study of the Spent Nuclear Fuel Project system capacity is presented. The study was completed using a commercially available software package to develop a summary level model of the major project systems. Alternative configurations, sub-system cycle times, and operating scenarios were tested to identify their impact on total project duration and equipment requirements.

  3. Assessing the Control Systems Capacity for Demand Response in

    E-Print Network [OSTI]

    LBNL-5319E Assessing the Control Systems Capacity for Demand Response in California Industries in this report was coordinated by the Demand Response Research Center and funded by the California Energy of the Demand Response Research Center Industrial Controls Experts Working Group: · Jim Filanc, Southern

  4. Wind Farm Portfolio Optimization under Network Capacity Constraints

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Wind Farm Portfolio Optimization under Network Capacity Constraints H´el`ene Le Cadre, Anthony of wind farms in a Market Coupling organization, for two Market Designs (exogenous prices and endogenous of efficient wind farm portfolios, is derived theoretically as a function of the number of wind farms

  5. Power Control and Capacity of Spread Spectrum Wireless Networks

    E-Print Network [OSTI]

    Tse, David

    Power Control and Capacity of Spread Spectrum Wireless Networks S.V. Hanly a;1 , and D.N. Tse b;2, there has been signif­ icant research in the area in recent years. While power control has been considered questions about optimal power control as well as the problem of charac­ terizing the resulting network

  6. Effect of Mobility on Power Control and System Capacity

    E-Print Network [OSTI]

    Kumar, Anurag

    Effect of Mobility on Power Control and System Capacity in CDMA Cellular Wireless Networks Munish control, admission control and user mobility. We compare two methods for power control: Constant Re­ ceived Power Control (CRPC) in which the total power received at each base station (BS) is kept constant

  7. Energy-Efficient Dynamic Capacity Provisioning in Server Farms

    E-Print Network [OSTI]

    Harchol-Balter, Mor

    Energy-Efficient Dynamic Capacity Provisioning in Server Farms Anshul Gandhi Varun Gupta Mor, either expressed or implied, of NSF. #12;Keywords: Server farms, Power management, Queueing theory #12;Abstract A central question in designing server farms today is how to efficiently provision the number

  8. High capacity nickel battery material doped with alkali metal cations

    DOE Patents [OSTI]

    Jackovitz, John F. (Monroeville, PA); Pantier, Earl A. (Penn Hills, PA)

    1982-05-18T23:59:59.000Z

    A high capacity battery material is made, consisting essentially of hydrated Ni(II) hydroxide, and about 5 wt. % to about 40 wt. % of Ni(IV) hydrated oxide interlayer doped with alkali metal cations selected from potassium, sodium and lithium cations.

  9. Capacities and Research in Homeland Security The University at Buffalo

    E-Print Network [OSTI]

    Krovi, Venkat

    , and Biophotonics (ILPB) and the Center for Spin Effects and Quantum Information in Nanostructures (CSEQuIN) conduct multidisciplinary science and technology programs focusing on the development of: (1) high capacity data storage devices for "smart sensor" systems to detect biological and chemical agents. These research directions

  10. The Capacity Loss of Dense Constellations Tobias Koch

    E-Print Network [OSTI]

    high SNR, our results recover the power loss of 1.53dB for square signal constellations without-noise channels for suitably high signal- to-noise ratio. Our expression for the capacity loss recovers the power loss of 1.53dB for square signal constellations. I. INTRODUCTION As it is well known, the channel

  11. TRENDS IN ELECTRICITY CONSUMPTION, PEAK DEMAND, AND GENERATING CAPACITY IN

    E-Print Network [OSTI]

    California at Berkeley. University of

    PWP-085 TRENDS IN ELECTRICITY CONSUMPTION, PEAK DEMAND, AND GENERATING CAPACITY IN CALIFORNIA, California 94720-5180 www.ucei.org #12;TRENDS IN ELECTRICITY CONSUMPTION, PEAK DEMAND, AND GENERATING** Abstract This study analyzes state and regional electricity supply and demand trends for the eleven states

  12. Dynamic Energy-Aware Capacity Provisioning for Cloud Computing Environments

    E-Print Network [OSTI]

    Boutaba, Raouf

    reduction in energy cost, while maintaining an acceptable average scheduling delay for individual tasksDynamic Energy-Aware Capacity Provisioning for Cloud Computing Environments Qi Zhang University by amortizing initial capital investment over large number of machines, they also incur tremendous energy cost

  13. A CAUTIONARY NOTE REGARDING THE DATA INTEGRITY CAPACITY

    E-Print Network [OSTI]

    Irvine, Cynthia E.

    assurance components, as well as the integrity of data read from high assurance repositories and displayedA CAUTIONARY NOTE REGARDING THE DATA INTEGRITY CAPACITY OF CERTAIN SECURE SYSTEMS Cynthia E. Irvine of architecture. We discuss the general integrity property that systems can only be trusted to manage modi able

  14. Capacity-aware back-pressure traffic signal control

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    load, one must wonder whether the network is used at its maximum capacity. Vehicle automation is expected to enable much more precise and intelligent coordination between vehicles, possibly reducing congestion [1]. However, automated cars are not currently ready for large commercial deployment. Human

  15. On the Throughput Capacity of Heterogeneous Wireless Networks

    E-Print Network [OSTI]

    Latchman, Haniph A.

    On the Throughput Capacity of Heterogeneous Wireless Networks Pan Li, Member, IEEE, and Yuguang of wireless networks. However, it is commonly assumed that all nodes in the network are identical. The issue of heterogeneous wireless networks with general network settings. Specifically, we consider an extended network

  16. Solar Photovoltaic Capacity F t P f d P li

    E-Print Network [OSTI]

    6/19/2013 1 Solar Photovoltaic ­ Capacity F t P f d P li Generating Resources Advisory Committee Advisor Model (SAM), version 2013.1.15 Technology: Solar PV (PVWatts system model)Technology: Solar PV (MWh) (First year output, each year thereafter degrades 0.5%) 6 #12;6/19/2013 4 Shape of PNW Solar PV

  17. Lecture Ch. 2a Energy and heat capacity

    E-Print Network [OSTI]

    Russell, Lynn

    machine! Conservation of energy! Definition of energy! Uniqueness of work values! Q = 0,W = 0 ! "E = 0 ! E1 Lecture Ch. 2a · Energy and heat capacity ­ State functions or exact differentials ­ Internal energy vs. enthalpy · 1st Law of thermodynamics ­ Relate heat, work, energy · Heat/work cycles (and path

  18. Lecture Ch. 2a Energy and heat capacity

    E-Print Network [OSTI]

    Russell, Lynn

    of energy Definition of energy Uniqueness of work values Q = 0,W = 0 E = 0 E2 = E1 Q = 0 E = W Wrev1 Lecture Ch. 2a · Energy and heat capacity ­ State functions or exact differentials ­ Internal energy vs. enthalpy · 1st Law of thermodynamics ­ Relate heat, work, energy · Heat/work cycles (and path

  19. Linear Codes, Target Function Classes, and Network Computing Capacity

    E-Print Network [OSTI]

    Franceschetti, Massimo

    Linear Codes, Target Function Classes, and Network Computing Capacity Rathinakumar Appuswamy Submitted: May 6, 2011 Abstract We study the use of linear codes for network computing in single in network coding are applicable to network computing as well. Network computing problems arise in various

  20. : Measurement of Battery Capacity in Mobile Robot Systems

    E-Print Network [OSTI]

    Breu, Ruth

    . These enhancements pose demanding operation conditions on the battery, emphasizing the importance of this com- ponentRoBM2 : Measurement of Battery Capacity in Mobile Robot Systems Nestor Lucas1 , Cosmin Codrea1. With battery driven robot systems performing very sophisti- cated tasks, increasing demands on the power supply

  1. COMMUNITY CAPACITY BUILDING FOR REVITALIZATION AND SUSTAINABLE REDEVELOPMENT

    SciTech Connect (OSTI)

    Downing, Melinda; Rosenthall, John; Hudson, Michelle

    2003-02-27T23:59:59.000Z

    Capacity building programs help poor and disadvantaged communities to improve their ability to participate in the environmental decision-making processes. They encourage citizen involvement, and provide the tools that enable them to do so. Capacity building enables communities that would otherwise be excluded to participate in the process, leading to better, and more just decisions. The Department of Energy (DOE) continues to be committed to promoting environmental justice and involving its stakeholders more directly in the planning and decision-making process for environmental cleanup. DOE's Environmental Management Program (EM) is in full support of this commitment. Through its environmental justice project, EM provides communities with the capacity to effectively contribute to a complex technical decision-making process by furnishing access to computers, the Internet, training and technical assistance. DOE's Dr. Samuel P. Massie Chairs of Excellence Program (Massie Chairs) function as technical advisors to many of these community projects. The Massie Chairs consist of nationally and internationally recognized engineers and scientists from nine Historically Black Colleges and Universities (HBCUs) and one Hispanic Serving Institution (HIS). This paper will discuss capacity building initiatives in various jurisdictions.

  2. How Mobility Increases Mobile Cloud Computing Processing Capacity

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    How Mobility Increases Mobile Cloud Computing Processing Capacity Anh-Dung Nguyen, Patrick S--In this paper, we address a important and still unanswered question in mobile cloud computing "how mobility the resilience of mobile cloud computing services. Keywords--Mobile cloud computing, mobility, quality of service

  3. Capacity planning in a transitional economy: What issues? Which models?

    SciTech Connect (OSTI)

    Mubayi, V.; Leigh, R.W. [Brookhaven National Lab., Upton, NY (United States); Bright, R.N. [Anylec Research, Inc., Bayport, NY (United States)

    1996-03-01T23:59:59.000Z

    This paper is devoted to an exploration of the important issues facing the Russian power generation system and its evolution in the foreseeable future and the kinds of modeling approaches that capture those issues. These issues include, for example, (1) trade-offs between investments in upgrading and refurbishment of existing thermal (fossil-fired) capacity and safety enhancements in existing nuclear capacity versus investment in new capacity, (2) trade-offs between investment in completing unfinished (under construction) projects based on their original design versus investment in new capacity with improved design, (3) incorporation of demand-side management options (investments in enhancing end-use efficiency, for example) within the planning framework, (4) consideration of the spatial dimensions of system planning including investments in upgrading electric transmission networks or fuel shipment networks and incorporating hydroelectric generation, (5) incorporation of environmental constraints and (6) assessment of uncertainty and evaluation of downside risk. Models for exploring these issues include low power shutdown (LPS) which are computationally very efficient, though approximate, and can be used to perform extensive sensitivity analyses to more complex models which can provide more detailed answers but are computationally cumbersome and can only deal with limited issues. The paper discusses which models can usefully treat a wide range of issues within the priorities facing decision makers in the Russian power sector and integrate the results with investment decisions in the wider economy.

  4. Optimal Demand Response Capacity of Automatic Lighting Control

    E-Print Network [OSTI]

    Mohsenian-Rad, Hamed

    . To remedy this problem, different demand side management programs have been proposed to shape the energy prior studies have extensively studied the capacity of offering demand response in buildings and office buildings. Keywords: Demand response, automatic lighting control, commercial and office buildings

  5. DHC: a diurnal heat capacity program for microcomputers

    SciTech Connect (OSTI)

    Balcomb, J.D.

    1985-01-01T23:59:59.000Z

    A computer program has been developed that can predict the temperature swing in direct gain passive solar buildings. The diurnal heat capacity (DHC) program calculates the DHC for any combination of homogeneous or layered surfaces using closed-form harmonic solutions to the heat diffusion equation. The theory is described, a Basic program listing is provided, and an example solution printout is given.

  6. Advanced Reservoir Characterization and Development through High-Resolution 3C3D Seismic and Horizontal Drilling: Eva South Marrow Sand Unit, Texas County, Oklahoma

    SciTech Connect (OSTI)

    Wheeler,David M.; Miller, William A.; Wilson, Travis C.

    2002-03-11T23:59:59.000Z

    The Eva South Morrow Sand Unit is located in western Texas County, Oklahoma. The field produces from an upper Morrow sandstone, termed the Eva sandstone, deposited in a transgressive valley-fill sequence. The field is defined as a combination structural stratigraphic trap; the reservoir lies in a convex up -dip bend in the valley and is truncated on the west side by the Teepee Creek fault. Although the field has been a successful waterflood since 1993, reservoir heterogeneity and compartmentalization has impeded overall sweep efficiency. A 4.25 square mile high-resolution, three component three-dimensional (3C3D) seismic survey was acquired in order to improve reservoir characterization and pinpoint the optimal location of a new horizontal producing well, the ESU 13-H.

  7. Development of a 400 Level 3C Clamped Downhole Seismic Receiver Array for 3D Borehole Seismic Imaging of Gas Reservoirs

    SciTech Connect (OSTI)

    Bjorn N. P. Paulsson

    2006-09-30T23:59:59.000Z

    Borehole seismology is the highest resolution geophysical imaging technique available today to the oil and gas industry for characterization and monitoring of oil and gas reservoirs. However, the industry's ability to perform high resolution 3D imaging of deep and complex gas reservoirs using borehole seismology has been hampered by the lack of acquisition technology necessary to record large volumes of high frequency, high signal-to-noise-ratio borehole seismic data. This project took aim at this shortcoming by developing a 400 level 3C clamped downhole seismic receiver array, and accompanying software, for borehole seismic 3D imaging. This large borehole seismic array has removed the technical acquisition barrier for recording the data volumes necessary to do high resolution 3D VSP and 3D cross-well seismic imaging. Massive 3D VSP{reg_sign} and long range Cross-Well Seismology (CWS) are two of the borehole seismic techniques that promise to take the gas industry to the next level in their quest for higher resolution images of deep and complex oil and gas reservoirs. Today only a fraction of the oil or gas in place is produced when reservoirs are considered depleted. This is primarily due to our lack of understanding of detailed compartmentalization of oil and gas reservoirs. In this project, we developed a 400 level 3C borehole seismic receiver array that allows for economic use of 3D borehole seismic imaging for reservoir characterization and monitoring. This new array has significantly increased the efficiency of recording large data volumes at sufficiently dense spatial sampling to resolve reservoir complexities. The receiver pods have been fabricated and tested to withstand high temperature (200 C/400 F) and high pressure (25,000 psi), so that they can operate in wells up to 7,620 meters (25,000 feet) deep. The receiver array is deployed on standard production or drill tubing. In combination with 3C surface seismic or 3C borehole seismic sources, the 400 level receiver array can be used to obtain 3D 9C data. These 9C borehole seismic data provide both compressional wave and shear wave information that can be used for quantitative prediction of rock and pore fluid types. The 400-level borehole receiver array has been deployed successfully in a number of oil and gas wells during the course of this project, and each survey has resulted in marked improvements in imaging of geologic features that are critical for oil or gas production but were previously considered to be below the limits of seismic resolution. This added level of reservoir detail has resulted in improved well placement in the oil and gas fields that have been drilled using the Massive 3D VSP{reg_sign} images. In the future, the 400-level downhole seismic receiver array is expected to continue to improve reservoir characterization and drilling success in deep and complex oil and gas reservoirs.

  8. The design and optimization of two low frequency energy harvesters employing 3C-SiC/AlN/Mo composite layers

    SciTech Connect (OSTI)

    Iqbal, Abid, E-mail: abid.iqbal@griffithuni.edu.au; Mohd-Yasin, Faisal, E-mail: abid.iqbal@griffithuni.edu.au; Dimitrijev, Sima, E-mail: abid.iqbal@griffithuni.edu.au [Queensland Micro- and Nanotechnology Centre, Griffith University, Brisbane, QLD 4111 (Australia)

    2014-10-24T23:59:59.000Z

    This paper presents the design and simulation of twocantilever-based energy harvesters that employs cubic silicon carbide on silicon (3C-SiC-on-Si) wafer as the base material and bottom electrode. Aluminum Nitride (AlN) is employed as the piezoelectric/middle layer due to its excellent material properties and high stability in varying temperature and harsh environment. Molybdenum (Mo) serves as the top layer/electrode. The thickness of the structural layers are optimized through MATLAB and also analyzed via Finite Element Analysis using Intellisuite. Two designs are proposed at low resonant frequency, one with conventional cantilever beam, the other being a T-shaped cantilever beam. Both structures are simulated and their performances are compared.

  9. Direct growth of few-layer graphene on 6H-SiC and 3C-SiC/Si via propane chemical vapor deposition

    SciTech Connect (OSTI)

    Michon, A.; Vezian, S.; Portail, M. [CNRS-CRHEA, Rue Bernard Gregory, 06560 Valbonne (France); Ouerghi, A. [CNRS-LPN, Route de Nozay, 91460 Marcoussis (France); Zielinski, M.; Chassagne, T. [NOVASiC, Savoie Technolac, Arche Bat 4, BP267, 73375 Le Bourget du Lac (France)

    2010-10-25T23:59:59.000Z

    We propose to grow graphene on SiC by a direct carbon feeding through propane flow in a chemical vapor deposition reactor. X-ray photoemission and low energy electron diffraction show that propane allows to grow few-layer graphene (FLG) on 6H-SiC(0001). Surprisingly, FLG grown on (0001) face presents a rotational disorder similar to that observed for FLG obtained by annealing on (000-1) face. Thanks to a reduced growth temperature with respect to the classical SiC annealing method, we have also grown FLG/3C-SiC/Si(111) in a single growth sequence. This opens the way for large-scale production of graphene-based devices on silicon substrate.

  10. Two-dimensional titanium carbonitrides and their hydroxylated derivatives: Structural, electronic properties and stability of MXenes Ti{sub 3}C{sub 2?x}N{sub x}(OH){sub 2} from DFTB calculations

    SciTech Connect (OSTI)

    Enyashin, A.N.; Ivanovskii, A.L., E-mail: ivanovskii@ihim.uran.ru

    2013-11-15T23:59:59.000Z

    The structural, electronic properties and stability of the new MXene compounds—two-dimensional pristine carbonitrides Ti{sub 3}C{sub 2?x}N{sub x} and their hydroxylated derivatives Ti{sub 3}C{sub 2?x}N{sub x}(OH){sub 2} are studied by means of DFTB calculations. The genesis of the properties is discussed in the sequence: binary MXenes Ti{sub 3}C{sub 2} (Ti{sub 3}N{sub 2})?hydroxylated forms Ti{sub 3}C{sub 2}(OH){sub 2} (Ti{sub 3}N{sub 2}(OH){sub 2})?pristine MXene Ti{sub 3}C{sub 2?x}N{sub x}?hydroxylated Ti{sub 3}C{sub 2?x}N{sub x}(OH){sub 2}. All examined materials are metallic-like. The most favorable type of OH-covering is presented by the occupation of the hollow sites between three neighboring carbon (nitrogen) atoms. Two-dimensional MXene carbonitrides with random distribution of C and N atoms are found to be thermodynamically more favorable. - Graphical abstract: The side views of the optimized atomic structures of some examined hydroxylated derivatives of MXene Ti{sub 3}CN and their electronic band structures. Display Omitted - Highlights: • Very recently 2D titanium carbonitrides have been synthesized. • Structural, electronic properties and stability for these materials were evaluated. • The hydroxylated derivatives of 2D titanium carbonitrides are examined.

  11. B and I-band optical micro-variability observations of the BL Lac objects S5 2007+777 and 3C371

    E-Print Network [OSTI]

    E. M. Xilouris; I. E. Papadakis; P. Boumis; A. Dapergolas; J. Alikakos; J. Papamastorakis; N. Smith; C. D. Goudis

    2005-11-04T23:59:59.000Z

    We have observed S5 2007+777 and 3C371 in the B and I bands for 13 and 8 nights, respectively, during various observing runs in 2001, 2002 and 2004. The observations resulted in almost evenly sampled light curves, 6-9 hours long. We do not detect any flares within the observed light curves, but we do observe small amplitude, significant variations, in both bands, on time scales of hours and days. The average variability amplitude on time scales of minutes/hours is 2.5% and 1-1.5% in the case of S5 2007+777 and 3C371, respectively. The average amplitudes increase to 5-12% and 4-6%, respectively, on time scales of days. We find that the B and I band variations are highly correlated, on both short and long time scales. During the 2004 observations, which resulted in the longest light curves, we observe two well defined flux-decay and rising trends in the light curves of both objects. When the flux decays, we observe significant delays, with the B band flux decaying faster than the flux in the I band. As a result, we also observe significant, flux related spectral variations as well. The flux-spectral relation is rather complicated, with loop-like structures forming during the flux evolution. The presence of spectral variations imply that the observed variability is not caused by geometric effects. On the other hand, our results are fully consistent with the hypothesis that the observed variations are caused by perturbations which affect different regions in the jet of the sources.

  12. Modeling Credit Value Adjustment With Downgrade-Triggered Termination Clause Using A Ruin Theoretic Approach

    E-Print Network [OSTI]

    Feng, Runhuan

    . At the heart of the valuation of credit risk adjustment(CVA) is the computation of the probability of default, Laplace transform inversion, finite- time ruin probability. 1 Introduction The recent financial crisis limit. Nevertheless, numerous examples from the 2007 crisis have shown that even the high profile

  13. Using Electronic Adjustable Speed Drives for Efficiency Improvement and Cost Reduction

    E-Print Network [OSTI]

    Friedman, N. R.

    U.S. industry and utilities have been using ac adjustable speed drives (ASDs) for more than 50 years. ASDs utilize power electronics technology to control the flow of power to an ac motor, thereby controlling the motor’s speed and rate of energy...

  14. Reinforcement Learning to Adjust Robot Movements to New Situations MPI Tbingen, Germany

    E-Print Network [OSTI]

    , namely a kernelized version of the reward-weighted regres- sion. We show two robot applications and Peters, 2010], and even in tasks with potential industrial applications [Urbanek et al., 2004Reinforcement Learning to Adjust Robot Movements to New Situations Jens Kober MPI Tübingen, Germany

  15. Z .Global and Planetary Change 20 1999 93123 Global sea level rise and glacial isostatic adjustment

    E-Print Network [OSTI]

    Peltier, W. Richard

    adjustment W.R. Peltier ) Department of Physics, UniÕersity of Toronto, 60 St. George Street, Toronto-mail: peltier@atmosp.physics.utoronto.ca Z .rather recently Peltier and Tushingham, 1989 , it was not clearly;( )W.R. PeltierrGlobal and Planetary Change 20 1999 93­12394 Z .existed at that time e.g., Peltier

  16. JOURNAL OF GEOPHYSICAL RESEARCH, VOL. ???, XXXX, DOI:10.1029/, Altitude-Adjusted Corrected Geomagnetic Coordinates

    E-Print Network [OSTI]

    Shepherd, Simon

    ]; and satellite measurements of particles and electric currents to determine magnetospheric boundaries and large Geomagnetic Coordinates: Definition and Functional Approximations S. G. Shepherd Thayer School of Engineering to transform between geo- graphic and Altitude-Adjusted Corrected Geomagnetic (AACGM) coordinates reveals

  17. A Nonparametric Matching Method for Covariate Adjustment with Application to Economic Evaluation

    E-Print Network [OSTI]

    Sekhon, Jasjeet S.

    A Nonparametric Matching Method for Covariate Adjustment with Application to Economic Evaluation of propensity score and Mahalanobis distance matching. We apply Genetic Matching to an economic evaluation and nonparametric methods; observational stud- ies; health economic evaluation #12;1 Introduction Progress has been

  18. Faraday cup with nanosecond response and adjustable impedance for fast electron beam characterization

    SciTech Connect (OSTI)

    Hu Jing; Rovey, Joshua L. [Missouri University of Science and Technology (Formerly University of Missouri-Rolla), Rolla, Missouri 65409 (United States)

    2011-07-15T23:59:59.000Z

    A movable Faraday cup design with simple structure and adjustable impedance is described in this work. This Faraday cup has external adjustable shunt resistance for self-biased measurement setup and 50 {Omega} characteristic impedance to match with 50 {Omega} standard BNC coaxial cable and vacuum feedthroughs for nanosecond-level pulse signal measurements. Adjustable shunt resistance allows self-biased measurements to be quickly acquired to determine the electron energy distribution function. The performance of the Faraday cup is validated by tests of response time and amplitude of output signal. When compared with a reference source, the percent difference of the Faraday cup signal fall time is less than 10% for fall times greater than 10 ns. The percent difference of the Faraday cup signal pulse width is below 6.7% for pulse widths greater than 10 ns. A pseudospark-generated electron beam is used to compare the amplitude of the Faraday cup signal with a calibrated F-70 commercial current transformer. The error of the Faraday cup output amplitude is below 10% for the 4-14 kV tested pseudospark voltages. The main benefit of this Faraday cup is demonstrated by adjusting the external shunt resistance and performing the self-biased method for obtaining the electron energy distribution function. Results from a 4 kV pseudospark discharge indicate a ''double-humped'' energy distribution.

  19. Economics Department Working Paper Series Border Carbon Adjustments and the Potential for

    E-Print Network [OSTI]

    Sussex, University of

    in major emerging economies ­ especially India and China ­ with consequent carbon leakage2 . UnderEconomics Department Working Paper Series No. 6-2010 Border Carbon Adjustments and the Potential.holmes@sussex.ac.uk j.rollo@sussex.ac.uk Abstract: Balancing legitimate fears that carbon leakage could undermine

  20. Consumption-Based Adjustment of China's Emissions-Intensity Targets: An

    E-Print Network [OSTI]

    China's Twelfth Five-Year Plan (2011­2015) aims to achieve a national carbon intensity reduction of 17's provinces is complicated by the fact that more than half of China's national carbon emissions are embodiedConsumption-Based Adjustment of China's Emissions-Intensity Targets: An Analysis of its Potential

  1. Generalized 3-D Tolerance Analysis of Mechanical Assemblies with Small Kinematic Adjustments

    E-Print Network [OSTI]

    ) for tolerance analysis of 3-D mechanical assemblies is presented. Vector assembly models are used, based on 3-D. Tolerance analysis procedures are formulated for both open and closed loop assembly models. The method generalizes assembly variation models to include small kinematic adjustments between mating parts. Open vector

  2. Life-Add: Lifetime Adjustable Design for WiFi Networks with Heterogeneous Energy Supplies

    E-Print Network [OSTI]

    Sinha, Prasun

    Life-Add: Lifetime Adjustable Design for WiFi Networks with Heterogeneous Energy Supplies Shengbo Chen§, Tarun Bansal§, Yin Sun§, Prasun Sinha and Ness B. Shroff Department of ECE, The Ohio State University Department of CSE, The Ohio State University Email: {chens,shroff}@ece.osu.edu, {bansal,prasun}@cse.ohio

  3. A Gain-adjusted Fuzzy PI/PD Adaptive Controller based on the Accumulated Genetic Algorithm

    E-Print Network [OSTI]

    Chou, Chien-Hsing (Ister)

    for each cycle and future regulates the parameter of controller by two factors or functions. In addition, the controller signal is fed back to the adaptive mechanism [15] and [16]. Then, the regulated functions on a fuzzy reasoning is designed to adjust the output range of a controller in [17]. The ideal structure

  4. A uniform price auction with locational price adjustments for competitive electricity markets

    E-Print Network [OSTI]

    b School of Electrical Engineering, Phillips Hall, Cornell University, Ithaca, NY 14853, USA cA uniform price auction with locational price adjustments for competitive electricity markets of Agricultural, Resource and Managerial Economics (ARME), Warren Hall, Cornell University, Ithaca, NY 14853, USA

  5. ADJUSTING TO NATURAL DISASTERS Smith, V., Carbone, J., Hallstrom, D., Pope, J. & Darden, M.

    E-Print Network [OSTI]

    Wang, Hai

    the largest U.S. natural disaster on record, Hurricane Andrew, to evaluate how people and housing markets Hurricane Andrew, the largest U.S. natural disaster on record, to investigate two questions.1 We first most of the differences in demographic groups' patterns of adjustment to the hurricane damage. Low

  6. The Adjustment of Avian Metabolic Rates and Water Fluxes to Desert Environments

    E-Print Network [OSTI]

    Williams, Jos. B.

    ambient air temperatures (Ta), low primary productivity, and lack of surface water place deserts among and Seely 1982; Williams and Tieleman 2000b). Likewise, lack of surface water ostensibly limits water intake461 The Adjustment of Avian Metabolic Rates and Water Fluxes to Desert Environments B. Irene

  7. Hydraulic adjustment of Scots pine across Europe J. Martnez-Vilalta1,2

    E-Print Network [OSTI]

    Mencuccini, Maurizio

    Research Hydraulic adjustment of Scots pine across Europe J. Martínez-Vilalta1,2 , H. Cochard3), 8903 Birmensdorf, Switzerland Summary · The variability of branch-level hydraulic properties, xylem anatomy, sapwood- and leaf-specific hydraulic conductivity (KS and KL), vulnerability to embolism

  8. Adjusting for selection bias in Web surveys using propensity scores: the case of the Health

    E-Print Network [OSTI]

    Schonlau, Matt

    Adjusting for selection bias in Web surveys using propensity scores: the case of the Health at the Joint Statistical Meetings, Toronto, August 2004. Abstract Many web surveys allow respondents to self as supplementary information about which subset of HRS respondents also responded to an additional web survey (web

  9. Development of the Flux-Adjusting Surface Data Assimilation System for Mesoscale Models

    E-Print Network [OSTI]

    Niyogi, Dev

    Development of the Flux-Adjusting Surface Data Assimilation System for Mesoscale Models KIRAN and temperature and for surface air temperature and water vapor mixing ratio for mesoscale models. In the FASDAS-field variables. The FASDAS is coupled to a land surface submodel in a three-dimensional mesoscale model and tests

  10. The Adjustable Grid: A Grid-Based Cursor Control Solution using Speech Recognition

    E-Print Network [OSTI]

    Gray, Jeffrey G.

    The Adjustable Grid: A Grid-Based Cursor Control Solution using Speech Recognition Tarif Haque1 of grid-based cursor control systems using speech recognition have been developed. These systems typically overlay a numbered 3x3 grid on the screen and allow the user to recursively drill the cursor down

  11. Carbon Dioxide Sealing Capacity: Textural or Compositional Controls?

    SciTech Connect (OSTI)

    Cranganu, Constantin; Soleymani, Hamidreza; Sadiqua, Soleymani; Watson, Kieva

    2013-11-30T23:59:59.000Z

    This research project is aiming to assess the carbon dioxide sealing capacity of most common seal-rocks, such as shales and non-fractured limestones, by analyzing the role of textural and compositional parameters of those rocks. We hypothesize that sealing capacity is controlled by textural and/or compositional pa-rameters of caprocks. In this research, we seek to evaluate the importance of textural and compositional parameters affecting the sealing capacity of caprocks. The conceptu-al framework involves two testable end-member hypotheses concerning the sealing ca-pacity of carbon dioxide reservoir caprocks. Better understanding of the elements controlling sealing quality will advance our knowledge regarding the sealing capacity of shales and carbonates. Due to relatively low permeability, shale and non-fractured carbonate units are considered relatively imper-meable formations which can retard reservoir fluid flow by forming high capillary pres-sure. Similarly, these unites can constitute reliable seals for carbon dioxide capture and sequestration purposes. This project is a part of the comprehensive project with the final aim of studying the caprock sealing properties and the relationship between microscopic and macroscopic characteristics of seal rocks in depleted gas fields of Oklahoma Pan-handle. Through this study we examined various seal rock characteristics to infer about their respective effects on sealing capacity in special case of replacing reservoir fluid with super critical carbon dioxide (scCO{sub 2}). To assess the effect of textural and compositional properties on scCO{sub 2} maximum reten-tion column height we collected 30 representative core samples in caprock formations in three counties (Cimarron, Texas, Beaver) in Oklahoma Panhandle. Core samples were collected from various seal formations (e.g., Cherokee, Keys, Morrowan) at different depths. We studied the compositional and textural properties of the core samples using several techniques. Mercury Injection Porosimetry (MIP), Scanning Electron Microsco-py SEM, and Sedigraph measurements are used to assess the pore-throat-size distribu-tion, sorting, texture, and grain size of the samples. Also, displacement pressure at 10% mercury saturation (Pd) and graphically derived threshold pressure (Pc) were deter-mined by MIP technique. SEM images were used for qualitative study of the minerals and pores texture of the core samples. Moreover, EDS (Energy Dispersive X-Ray Spec-trometer), BET specific surface area, and Total Organic Carbon (TOC) measurements were performed to study various parameters and their possible effects on sealing capaci-ty of the samples. We found that shales have the relatively higher average sealing threshold pressure (Pc) than carbonate and sandstone samples. Based on these observations, shale formations could be considered as a promising caprock in terms of retarding scCO{sub 2} flow and leak-age into above formations. We hypothesized that certain characteristics of shales (e.g., 3 fine pore size, pore size distribution, high specific surface area, and strong physical chemical interaction between wetting phase and mineral surface) make them an effi-cient caprock for sealing super critical CO{sub 2}. We found that the displacement pressure at 10% mercury saturation could not be the ultimate representative of the sealing capacity of the rock sample. On the other hand, we believe that graphical method, introduced by Cranganu (2004) is a better indicator of the true sealing capacity. Based on statistical analysis of our samples from Oklahoma Panhandle we assessed the effects of each group of properties (textural and compositional) on maximum supercriti-cal CO{sub 2} height that can be hold by the caprock. We conclude that there is a relatively strong positive relationship (+.40 to +.69) between supercritical CO{sub 2} column height based on Pc and hard/ soft mineral content index (ratio of minerals with Mohs hardness more than 5 over minerals with Mohs hardness less than 5) in both shales and limestone samples. Average median pore rad

  12. MISO Capacity with Per-Antenna Power Constraint

    E-Print Network [OSTI]

    Vu, Mai

    2010-01-01T23:59:59.000Z

    We establish in closed-form the capacity and the optimal signaling scheme for a MISO channel with per-antenna power constraint. Two cases of channel state information are considered: constant channel known at both the transmitter and receiver, and Rayleigh fading channel known only at the receiver. For the first case, the optimal signaling scheme is beamforming with the phases of the beam weights matched to the phases of the channel coefficients, but the amplitudes independent of the channel coefficients and dependent only on the constrained powers. For the second case, the optimal scheme is to send independent signals from the antennas with the constrained powers. In both cases, the capacity with per-antenna power constraint is usually less than that with sum power constraint.

  13. Great Lakes ports coal handling capacity and export coal potential

    SciTech Connect (OSTI)

    Ames, A.H. Jr.

    1981-02-01T23:59:59.000Z

    This study was developed to determine the competitive position of the Great Lakes Region coal-loading ports in relation to other US coastal ranges. Due to the congestion at some US Atlantic coastal ports US coal producers have indicated a need for alternative export routes, including the Great Lakes-St. Lawrence Seaway System. The study assesses the regions coal handling capacity and price competitiveness along with the opportunity for increased US flag vessel service. A number of appendices are included showing major coal producers, railroad marketing representatives, US vessel operators, and port handling capacities and throughput. A rate analysis is provided including coal price at the mine, rail rate to port, port handling charges, water transportation rates to western Europe, Great Lakes route versus the US Atlantic Coast ports.

  14. Wyoming Natural Gas Underground Storage Capacity (Million Cubic Feet)

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial602 1,397 125 Q 69 (MillionAdjustments (MillionYear Jan Feb Mar Apr May

  15. Wyoming Working Natural Gas Underground Storage Capacity (Million Cubic

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial602 1,397 125 Q 69 (MillionAdjustments (MillionYearYear Jan

  16. Spent nuclear fuel project design basis capacity study

    SciTech Connect (OSTI)

    Cleveland, K.J.

    1998-07-22T23:59:59.000Z

    A parametric study of the Spent Nuclear Fuel Project system capacity is presented. The study was completed using a commercially available software package to develop a summary level model of the major project systems. A base case, reflecting the Fiscal Year 1998 process configuration, is evaluated. Parametric evaluations are also considered, investigating the impact of higher fuel retrieval system productivity and reduced shift operations at the canister storage building on total project duration.

  17. Psychrometric Testing Facility Restoration and Cooling Capacity Testing 

    E-Print Network [OSTI]

    Cline, Vincent E.

    2010-10-12T23:59:59.000Z

    .................................................................. 15 Table 3 Specified test tolerances for cooling capacity testing according to ASHRAE 210/240 .................................................................. 16 Table 4 Required test condition variations not covered in Table 2... throughout the test while maintaining the room conditions [2]. The air conditioning system and psychrometric rooms are run for at least 1.5 hours before data is recorded in order to allow the rooms to reach and maintain steady state conditions. Data...

  18. Optimal control in thermodynamic systems with sources of finite capacity

    SciTech Connect (OSTI)

    Kuznetsov, A.G.; Rudenko, A.V.; Tsirlin, A.M.

    1985-11-10T23:59:59.000Z

    This paper considers problems of optimal control of thermodynamic processes of heat and mass transfer on contact of two systems. The control signal is a vector of the temperatures and concentrations of one system, the parameters of the second being variable at a rate proportional to the heat and material flows. The limiting efficiency of the heat machine is found when the cycle duration and source capacities are bounded.

  19. Hybrid heat capacity-moving slab solid-state laser

    DOE Patents [OSTI]

    Stappaerts, Eddy A.

    2005-03-01T23:59:59.000Z

    Laser material is pumped and its stored energy is extracted in a heat capacity laser mode at a high duty factor. When the laser material reaches a maximum temperature, it is removed from the lasing region and a subsequent volume of laser material is positioned into the lasing region to repeat the lasing process. The heated laser material is cooled passively or actively outside the lasing region.

  20. High Capacity Pouch-Type Li-air Batteries

    SciTech Connect (OSTI)

    Wang, Deyu; Xiao, Jie; Xu, Wu; Zhang, Jiguang

    2010-05-05T23:59:59.000Z

    The pouch-type Li-air batteries operated in ambient condition are reported in this work. The battery used a heat sealable plastic membrane as package material, O2¬ diffusion membrane and moisture barrier. The large variation in internal resistance of the batteries is minimized by a modified separator which can bind the cell stack together. The cells using the modified separators show improved and repeatable discharge performances. It is also found that addition of about 20% of 1,2-dimethoxyethane (DME) in PC:EC (1:1) based electrolyte solvent improves can improve the wetability of carbon electrode and the discharge capacities of Li-air batteries, but further increase in DME amount lead to a decreased capacity due to increase electrolyte loss during discharge process. The pouch-type Li-air batteries with the modified separator and optimized electrolyte has demonstrated a specific capacity of 2711 mAh g-1 based on carbon and a specific energy of 344 Wh kg-1 based on the complete batteries including package.

  1. Near-Capacity Turbo Equalization Using Optimized Turbo Codes

    E-Print Network [OSTI]

    Vladimir D. Trajkovi?; Minyue Fu; Peter J. Schreier

    Abstract—In this paper we analyze a turbo equalization scheme that combines Maximum a Posteriori Probability (MAP) equalization and turbo decoding. Our aim is to optimize the turbo equalizer in order to approach the information capacity limit for channels with severe Inter-Symbol Interference (ISI). For this purpose, we perform an extensive search for turbo codes that give an SNR-BER performance closest to the channel information capacity limit. Our results show that the optimized turbo equalizer can approach the information capacity limit to within 0.7 dB. We also optimize the turbo equalizer in terms of the minimum number of required turbo decoding iterations. Our results show that a turbo decoder within a turbo equalization loop requires only a small number of iterations. Finally, our analysis reveals that when there are turbo codes with similar extrinsic information transfer characteristics, the computational complexity can be reduced by choosing the code with the smallest constraint length with no loss in SNR-BER performance. I.

  2. Adjustment of the Remote Tropical Climate to El Nio Conditions BENJAMIN R. LINTNER* AND JOHN C. H. CHIANG

    E-Print Network [OSTI]

    Lintner, Benjamin Richard

    convective heating anomalies that in turn cause remote tropical changes through a suite of tele- connectedAdjustment of the Remote Tropical Climate to El Niño Conditions BENJAMIN R. LINTNER* AND JOHN C. H) ABSTRACT The adjustment of the tropical climate outside the Pacific (the "remote Tropics") to the abrupt

  3. Building Long-Term Sustained Capacity and Influencing Decisions: The U.S. DOE SEP Capacity Model

    SciTech Connect (OSTI)

    McCarthy, Patrick [TecMarket Works; Hall, Nick [TecMarket Works; Schweitzer, Martin [ORNL; Lambert, Faith [U.S. Department of Energy

    2011-01-01T23:59:59.000Z

    This paper presents a state-level systems model that incorporates traditional behavior change models into a more extensive framework for explaining energy efficiency and renewable energy impacts. The model was developed from a seminal national study of state energy programs covering a broad array of programmatic topic areas. The study examined a wide range of program offerings within 24 states, involving over 25 years of state efforts. While specific priorities and outcomes varied greatly across the states for each of the topic areas, consistent systems-level capacity-building patterns were revealed. This model demonstrates how the U.S. Department of Energy s (DOE s) State Energy Program (SEP) and non-SEP resources, when incorporated into a framework of essential capacity-building components, can lead to energy efficiency and renewable energy achievements. This paper then features two case study illustrations of the model.

  4. Model 923-B Mouse Gas Anesthesia Head Holder Adaptor Adjustment Features

    E-Print Network [OSTI]

    Kleinfeld, David

    Model 923-B Mouse Gas Anesthesia Head Holder Adaptor Adjustment Features Dorsal/Ventral dial.352.3139 Toll Free: 1.877.352.3275 ^^ci&ion Q)e&i^n^^^r ^esea/H^/i Model 923-B Mouse Gas Anesthesia Head Holder 923B-1/07 #12;MODEL 923-B MOUSE GAS ANESTHESIA HEAD HOLDER The KOPF Mouse Gas Anesthesia Head Holder

  5. Information Basic to Farm Adjustments in the High Plains Cotton Area of Texas.

    E-Print Network [OSTI]

    Thibodeaux, B. H. (Ben Hur); Bonnen, C. A. (Clarence Alfred); Magee, A. C. (Aden Combs)

    1944-01-01T23:59:59.000Z

    Division of Farm and Ranch Economics in Cooperation with Bureau of Agricultural Economics U. S. Department of Agriculture TEXAS AGRICULTURAL EXPERIMENT STATION A. B. CONNER, Director College Station, Texas BULLETIN NO. 652 JULY 1944... INFORMATION BASIC TO FARM ADJUSTMENTS IN THE HIGH PLAINS COTTON AREA OF TEXAS A. C. MAGEE, C. A. BONNEN, and B. H. THIBODEAUX AGRICULTURAL AND MECHANICAL COLLEGE OF TEXAS GIBB GILCHRIST, President [Blank Page in Original Bulletin] This bulletin deals...

  6. Use of parameter adjustment techniques in the simulation of multi-echelon inventory/distribution system

    E-Print Network [OSTI]

    Der Tatevasion, Thomas John

    1981-01-01T23:59:59.000Z

    USE OF PARAMETER ADJUSTI4IENT TECHNIQUES IN THE SIMULATION OF A 11ULTI-ECHELON INVENTORY/DISTRIBUTION SYSTEM A Thesis by THOMAS JOHN DER TATEVASION Submitted to the Graduate College of Texas ARM University in partial fulfillment... of the requirement for the degree of MASTER OF SCIENCE August 1981 Major Subject: Industrial Engineering USE OF PARAMETER ADJUSTMENT TECHNIQUES IN THE SIMULATION OF A MULTI-ECHELOI'I INVENTORY/DISTRIBUTION SYSTEM A Thes1s by THOMAS JOHN DER TATEVASION...

  7. New insights into the evolution of the FR I radio galaxy 3C 270 (NGC 4261) from VLA and GMRT radio observations

    E-Print Network [OSTI]

    Kolokythas, Konstantinos; Giacintucci, Simona; Raychaudhury, Somak; Ishwara-Chandra, C H; Worrall, Diana M; Birkinshaw, Mark

    2015-01-01T23:59:59.000Z

    We present Giant Metrewave Radio Telescope (GMRT) 240 MHz observations of the nearby luminous FR I radio source 3C 270, in the group-central elliptical NGC 4261. Combining these data with reprocessed Very Large Array (VLA) 1.55 and 4.8 GHz observations, we produce spectral index maps that reveal a constant spectral index along the jets and a gradual steepening from the ends of the jets through the lobes towards the nucleus. A Jaffe & Perola (JP) model fitted to the integrated spectrum of the source gives an asymptotic low-frequency index of $\\alpha_{inj}=0.53_{-0.02}^{+0.01}$, while JP models fitted to the observed spectral index trend along the lobes allow us to estimate radiative ages of $\\sim29$ Myr and $\\sim37$ Myr for the west and east lobes respectively. Our age estimates are a factor of two lower than the 75-Myr upper limit derived from X-ray data (O'Sullivan et al. 2011). We find unlikely the scenario of an early supersonic phase in which the lobe expanded into the ISM at approximately Mach 6 (350...

  8. The State Energy Program: Building Energy Efficiency and Renewable Energy Capacity in the States

    Broader source: Energy.gov [DOE]

    This study documents the capacity-building effects that the federal State Energy Program (SEP) has had on the states' capacity to design, manage and implement energy efficiency and renewable energy programs.

  9. Grid Integration and the Carrying Capacity of the U.S. Grid to...

    Energy Savers [EERE]

    Grid Integration and the Carrying Capacity of the U.S. Grid to Incorporate Variable Renewable Energy Grid Integration and the Carrying Capacity of the U.S. Grid to Incorporate...

  10. A New Vision for High-Capacity Hybrid Li-ion/Li-O2 Batteries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Introduces A New Vision for High-Capacity Hybrid Li-ionLi-O2 Batteries Diagram illustrating the CEES all-in-one vision for a high-capacity Li-ionLi-O2 cell. Illustration of CEES'...

  11. CRITICAL FIELD FOR SUPERCONDUCTIVITY AND LOW-TEMPERATURE NORMAL-STATE HEAT CAPACITY OF TUNGSTEN

    E-Print Network [OSTI]

    Triplett, B.B.

    2008-01-01T23:59:59.000Z

    NORMAL-STATE HEAT CAPACITY OF TUNGSTEN B. B. Triplett, N. E.State Heat Capacity of Tungsten* B. n. Triplett,t N. E.I. ;\\feasurement Properties of tungsten sa~ples. ~feasured

  12. Nanosheet-structured LiV3O8 with high capacity and excellent...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nanosheet-structured LiV3O8 with high capacity and excellent stability for high energy lithium batteries . Nanosheet-structured LiV3O8 with high capacity and excellent stability...

  13. Design of a cluster analysis heuristic for the configuration and capacity management of manufacturing cells

    E-Print Network [OSTI]

    Shim, Young Hak

    2007-09-17T23:59:59.000Z

    , the machine capacity was first ensured, and then manufacturing cells were configured to minimize intercellular movements. In order to ensure the machine capacity, the duplication of machines and the split of operations are allowed and operations are assigned...

  14. Parameter Estimation and Capacity Fade Analysis of Lithium-Ion Batteries Using Reformulated Models

    E-Print Network [OSTI]

    Braatz, Richard D.

    Many researchers have worked to develop methods to analyze and characterize capacity fade in lithium-ion batteries. As a complement to approaches to mathematically model capacity fade that require detailed understanding ...

  15. A Super-Additivity Inequality for Channel Capacity of Classical-Quantum Channels

    E-Print Network [OSTI]

    Rahul Jain

    2009-02-20T23:59:59.000Z

    We show a super-additivity inequality for the channel capacity of classical-quantum (c - q) channels.

  16. Equation calculates activated carbon's capacity for adsorbing pollutants

    SciTech Connect (OSTI)

    Yaws, C.L.; Bu, L.; Nijhawan, S. (Lamar Univ., Beaumont, TX (United States))

    1995-02-13T23:59:59.000Z

    Adsorption on activated carbon is an effective method for removing volatile organic compound (VOC) contaminants from gases. A new, simple equation has been developed for calculating activated carbon's adsorption capacity as a function of the VOC concentration in the gas. The correlation shows good agreement with experimental results. Results from the equation are applicable for conditions commonly encountered in air pollution control techniques (25 C, 1 atm). The only input parameters needed are VOC concentrations and a table of correlation coefficients for 292 C[sub 8]-C[sub 14] compounds. The table is suitable for rapid engineering usage with a personal computer or hand calculator.

  17. Biological Kraft Chemical Recycle for Augmentation of Recovery Furnace Capacity

    SciTech Connect (OSTI)

    Stuart E. Strand

    2001-12-06T23:59:59.000Z

    The chemicals used in pulping of wood by the kraft process are recycled in the mill in the recovery furnace, which oxidizes organics while simultaneously reducing sulfate to sulfide. The recovery furnace is central to the economical operation of kraft pulp mills, but it also causes problems. The total pulp production of many mills is limited by the recovery furnace capacity, which cannot easily be increased. The furnace is one of the largest sources of air pollution (as reduced sulfur compounds) in the kraft pulp mill.

  18. Flood control reservoir operations for conditions of limited storage capacity

    E-Print Network [OSTI]

    Rivera Ramirez, Hector David

    2005-02-17T23:59:59.000Z

    ). Therefore, if the entire flood control capacity of a reservoir is available, only an extremely severe flood event would require the implementation of the EOS for most reservoir projects, and thus the bulk of the research has been focused on how to manage... operations objectives. In other words, the REOS provide a set of rules that reflect the risk of flooding upstream as well as downstream of the dams. The USACE and other reservoir management agencies may use the methodology proposed in this study...

  19. U.S. Downstream Charge Capacity of Operable Petroleum Refineries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron Spin Transition in2,EHSS A-Zandofpoint motional%^602SWPACharge Capacity

  20. EIA - Natural Gas Pipeline Network - Pipeline Capacity and Utilization

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade Year-0E (2001)gasoline353/06)Pipeline Utilization & Capacity About

  1. EIA - Natural Gas Pipeline Network - Region To Region System Capacity

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade Year-0E (2001)gasoline353/06)Pipeline Utilization & Capacity

  2. AGA Producing Region Natural Gas Working Underground Storage Capacity

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40 Building Floorspace (Square Feet) 1,001Capacity (Million(Million Cubic Feet)

  3. AGA WesternConsuming Region Natural Gas Underground Storage Capacity

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40 Building Floorspace (Square Feet) 1,001Capacity(Million Cubic(Million Cubic

  4. Property:Geothermal/CapacityBtuHr | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska:PrecourtOid Jump to:Docket Number JumpAnnualGenBtuYrCapacityBtuHr

  5. Property:PotentialHydropowerCapacity | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGeneration Jump to: navigation,PotentialHydropowerCapacity Jump to:

  6. Property:PotentialOffshoreWindCapacity | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGeneration Jump to:PotentialOffshoreWindCapacity Jump to: navigation, search

  7. Property:PotentialOnshoreWindCapacity | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGeneration Jump to:PotentialOffshoreWindCapacity Jump

  8. Property:Project Installed Capacity (MW) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGenerationMethod Jump to: navigation, search Property NameInstalled Capacity

  9. An Analytical Model for Predicting the Remaining Battery Capacity of Lithium-Ion Batteries

    E-Print Network [OSTI]

    Pedram, Massoud

    An Analytical Model for Predicting the Remaining Battery Capacity of Lithium-Ion Batteries Peng cycle-life tends to shrink significantly. The capacities of commercial lithium-ion batteries fade by 10 prediction model to estimate the remaining capacity of a Lithium-Ion battery. The proposed analytical model

  10. ERDC/CHLTR-12-18 Dredged Material Placement Site Capacity

    E-Print Network [OSTI]

    US Army Corps of Engineers

    ERDC/CHLTR-12-18 Dredged Material Placement Site Capacity Analysis for Navigation Improvement. #12;ERDC/CHL TR-12-18 September 2012 Dredged Material Placement Site Capacity Analysis for Navigation of perfor- ming a dredged material placement (DMP) site capacity analysis for a Navigation Improvement

  11. On the Storage Capacity of Hopfield Models with Weakly Correlated Patterns

    E-Print Network [OSTI]

    Bielefeld, University of

    On the Storage Capacity of Hopfield Models with Weakly Correlated Patterns Matthias L¨owe Universit@mathematik.uni­bielefeld.de Keywords: Hopfield model, neural networks, storage capacity, Markov chains, large deviations AMS Subject Classification: 82C32, 82B44, 60K35 Abstract We analyze the storage capacity of different forms of the Hopfield

  12. Sensitivity of Gaussian Channel Capacity and ate-Distortion Function to nonGaussian Contamination

    E-Print Network [OSTI]

    Verdú, Sergio

    Sensitivity of Gaussian Channel Capacity and ate-Distortion Function to nonGaussian Contamination-Gaussian contaminating noise. Although the ca- pacity of such channels cannot be evaluated in general, we analyze the decrease in capacity, or sensitivity of the channel capacity to the weak contaminating noise. We show

  13. Edinburgh Research Explorer ERK2 Suppresses Self-Renewal Capacity of Embryonic Stem

    E-Print Network [OSTI]

    Koehn, Philipp

    Edinburgh Research Explorer ERK2 Suppresses Self-Renewal Capacity of Embryonic Stem Cells, T 2013, 'ERK2 Suppresses Self-Renewal Capacity of Embryonic Stem Cells, but Is Not Required for Multi date: 26. Jun. 2014 #12;ERK2 Suppresses Self-Renewal Capacity of Embryonic Stem Cells

  14. Energy-efficient Capacity-constrained Routing in Wireless Sensor Networks

    E-Print Network [OSTI]

    Venkatesan, S.

    1 Energy-efficient Capacity-constrained Routing in Wireless Sensor Networks Maulin Patel*, R or maximize the lifetime of the sensor network without taking into consideration limited capacity of wireless-hoc networks; Routing; Maximum Lifetime; Energy efficient; Capacity-constrained I. INTRODUCTION Wireless sensor

  15. DETERMINATION OF PHOTOVOLTAIC EFFECTIVE CAPACITY FOR Richard Perez for Clean Power Research

    E-Print Network [OSTI]

    Perez, Richard R.

    DETERMINATION OF PHOTOVOLTAIC EFFECTIVE CAPACITY FOR NEW JERSEY Richard Perez for Clean Power) requirements. #12;DETERMINATION OF PHOTOVOLTAIC EFFECTIVE CAPACITY FOR NEW JERSEY The ELCC metric dispatchable power plant. 2 #12;DETERMINATION OF PHOTOVOLTAIC EFFECTIVE CAPACITY FOR NEW JERSEY 0 1 2 3 4 5 6 7

  16. On Capacity of Wireless Networks Using Practical Directional Antennas Linghe Kong, 2

    E-Print Network [OSTI]

    antennas, which is called MC-MDA network. The capacity in MC-MDA network is derived under arbitrary of side lobe into account. We derive the capacity upper-bounds of MC-MDA networks in arbitrary and random the ratio increases. Moreover, we compare the network capacity of MC-MDA using the simplified antenna model

  17. PJM's Capacity Market in a Price-Spike World Steven Stoft

    E-Print Network [OSTI]

    California at Berkeley. University of

    PWP-077 PJM's Capacity Market in a Price-Spike World Steven Stoft May, 2000 This paper is part, California 94720-5180 www.ucei.org #12;PJM's Capacity Market in a Price-Spike World Steven Stoft 1 May 7, 2000 Abstract PJM's market was designed to rely on a capacity market instead of price-spikes to induce

  18. Calculation of heat capacities of light and heavy water by path-integral molecular dynamics

    E-Print Network [OSTI]

    Nielsen, Steven O.

    reproduces the isotope effect. The heat capacity in the liquid D2O has been calculated to be 10% higher than important in the liquid phase. In fact, in many systems, the heat capacity has an isotope effect, whichCalculation of heat capacities of light and heavy water by path-integral molecular dynamics

  19. Non-Coherent Capacity of Secret-Key Agreement with Public Discussion

    E-Print Network [OSTI]

    Khisti, Ashish

    1 Non-Coherent Capacity of Secret-Key Agreement with Public Discussion Anurag Agrawal, Zouheir-coherent capacity of secret-key agreement with public discussion, where neither the sender nor the receivers have Signal-to-Noise Ratio (SNR), the secret-key capacity is bounded in SNR, regardless of the number

  20. Evaluation of Simplified Methods for Estimating Shear Capacity Using JNES/NUPEC Low-Rise Concrete Shear Wall Cyclic Test Data.

    SciTech Connect (OSTI)

    Nie,J.; Braverman, J.; Hofmayer, C.; Ali, S.

    2008-06-01T23:59:59.000Z

    The simplified methods in current codes for determining the shear capacity of reinforced concrete shear walls had mostly been validated using the test results of single-element shear walls. Recently available JNES/NUPEC test data of reinforced concrete shear walls under multi-directional cyclic loadings provided a unique opportunity to investigate the adequacy of the simplified methods for use in situations with strong interaction effects. A total of 11 test specimens with aspect ratios between 0.47 and 0.87 have been used in the assessment. Two simplified methods from the ACI 349-01 standard [1] and one from the ASCE 43-05 standard [2] have been evaluated. This paper also presents the development of an adjustment factor to consider the aspect ratio and the development of two approaches to consider interaction effects for one of the simplified methods. It concludes with the insights on the applicability of the code methods when interaction effects exist.

  1. Data:A3c99f85-5e0a-4a80-bbe1-a849f9a14cb6 | Open Energy Information

    Open Energy Info (EERE)

    120240 volts three-wire, or other voltages as might be mutually agreeable. The fuel cost adjustment in dollars per kWh shall be the same as that recently billed to the Fulton...

  2. Discovery of Pulsations from the Pulsar J0205 6449 in SNR 3C 58 with the Fermi Gamma-Ray Space Telescope

    SciTech Connect (OSTI)

    Abdo, Aous A.; /Naval Research Lab, Wash., D.C.; Ackermann, M.; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Ajello, Marco; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Atwood, William B.; /UC, Santa Cruz; Axelsson, M.; /Stockholm U., OKC /Stockholm U.; Baldini, L.; /INFN, Pisa; Ballet, J.; /DAPNIA, Saclay; Barbiellini, Guido; /INFN, Trieste /Trieste U.; Bastieri, Denis; /INFN, Padua /Padua U.; Baughman, B.M.; /Ohio State U.; Bechtol, K.; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Bellazzini, Ronaldo; /INFN, Pisa; Berenji, Bijan; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Blandford, Roger D.; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Bloom, Elliott D.; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Bonamente, E.; /INFN, Perugia /Perugia U.; Borgland, Anders W.; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Bouvier, A.; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Bregeon, J.; /INFN, Pisa; Brez, A.; /INFN, Pisa; Brigida, M.; /Bari U. /INFN, Bari /Ecole Polytechnique /Washington U., Seattle /Bari U. /INFN, Bari /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /Columbia U. /IASF, Milan /IASF, Milan /DAPNIA, Saclay /INFN, Perugia /Perugia U. /NASA, Goddard /George Mason U. /Naval Research Lab, Wash., D.C. /NASA, Goddard /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /INFN, Perugia /Perugia U. /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /LPCE, Orleans /Montpellier U. /Stockholm U., OKC /Royal Inst. Tech., Stockholm /Stockholm U. /Naval Research Lab, Wash., D.C. /INFN, Trieste /Bari U. /INFN, Bari /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /UC, Santa Cruz /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /CENBG, Gradignan /CENBG, Gradignan /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /Manchester U. /Montpellier U. /Bari U. /INFN, Bari /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; /more authors..

    2011-12-01T23:59:59.000Z

    We report the discovery of {gamma}-ray pulsations ({ge}0.1 GeV) from the young radio and X-ray pulsar PSR J0205 + 6449 located in the Galactic supernova remnant 3C 58. Data in the {gamma}-ray band were acquired by the Large Area Telescope aboard the Fermi Gamma-ray Space Telescope (formerly GLAST), while the radio rotational ephemeris used to fold {gamma}-rays was obtained using both the Green Bank Telescope and the Lovell telescope at Jodrell Bank. The light curve consists of two peaks separated by 0.49 {+-} 0.01 {+-} 0.01 cycles which are aligned with the X-ray peaks. The first {gamma}-ray peak trails the radio pulse by 0.08 {+-} 0.01 {+-} 0.01, while its amplitude decreases with increasing energy as for the other {gamma}-ray pulsars. Spectral analysis of the pulsed {gamma}-ray emission suggests a simple power law of index -2.1 {+-} 0.1 {+-} 0.2 with an exponential cutoff at 3.0{sub -0.7}{sup +1.1} {+-} 0.4 GeV. The first uncertainty is statistical and the second is systematic. The integral {gamma}-ray photon flux above 0.1 GeV is (13.7 {+-} 1.4 {+-} 3.0) x 10{sup -8} cm{sup -2} s{sup -1}, which implies for a distance of 3.2 kpc and assuming a broad fan-like beam a luminosity of 8.3 x 10{sup 34} erg s{sup -1} and an efficiency {eta} of 0.3%. Finally, we report a 95% upper limit on the flux of 1.7 x 10{sup -8} cm{sup -2} s{sup -1} for off-pulse emission from the object.

  3. Air conditioning system with supplemental ice storing and cooling capacity

    DOE Patents [OSTI]

    Weng, Kuo-Lianq (Taichung, TW); Weng, Kuo-Liang (Taichung, TW)

    1998-01-01T23:59:59.000Z

    The present air conditioning system with ice storing and cooling capacity can generate and store ice in its pipe assembly or in an ice storage tank particularly equipped for the system, depending on the type of the air conditioning system. The system is characterized in particular in that ice can be produced and stored in the air conditioning system whereby the time of supplying cooled air can be effectively extended with the merit that the operation cycle of the on and off of the compressor can be prolonged, extending the operation lifespan of the compressor in one aspect. In another aspect, ice production and storage in great amount can be performed in an off-peak period of the electrical power consumption and the stored ice can be utilized in the peak period of the power consumption so as to provide supplemental cooling capacity for the compressor of the air conditioning system whereby the shift of peak and off-peak power consumption can be effected with ease. The present air conditioning system can lower the installation expense for an ice-storing air conditioning system and can also be applied to an old conventional air conditioning system.

  4. Liquid fuel vaporizer and combustion chamber having an adjustable thermal conductor

    DOE Patents [OSTI]

    Powell, Michael R; Whyatt, Greg A; Howe, Daniel T; Fountain, Matthew S

    2014-03-04T23:59:59.000Z

    The efficiency and effectiveness of apparatuses for vaporizing and combusting liquid fuel can be improved using thermal conductors. For example, an apparatus having a liquid fuel vaporizer and a combustion chamber can be characterized by a thermal conductor that conducts heat from the combustion chamber to the vaporizer. The thermal conductor can be a movable member positioned at an insertion depth within the combustion chamber that corresponds to a rate of heat conduction from the combustion chamber to the vaporizer. The rate of heat conduction can, therefore, be adjusted by positioning the movable member at a different insertion depth.

  5. Adjustable, rapidly switching microfluidic gradient generation using focused travelling surface acoustic waves

    SciTech Connect (OSTI)

    Destgeer, Ghulam; Im, Sunghyuk; Hang Ha, Byung; Ho Jung, Jin; Ahmad Ansari, Mubashshir; Jin Sung, Hyung, E-mail: hjsung@kaist.ac.kr [Department of Mechanical Engineering, KAIST, 291 Daejak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of)

    2014-01-13T23:59:59.000Z

    We demonstrate a simple device to generate chemical concentration gradients in a microfluidic channel using focused travelling surface acoustic waves (F-TSAW). A pair of curved interdigitated metal electrodes deposited on the surface of a piezoelectric (LiNbO{sub 3}) substrate disseminate high frequency sound waves when actuated by an alternating current source. The F-TSAW produces chaotic acoustic streaming flow upon its interaction with the fluid inside a microfluidic channel, which mixes confluent streams of chemicals in a controlled fashion for an adjustable and rapidly switching gradient generation.

  6. Information Basic to Farm Adjustments in the Rolling Plains Area of Texas.

    E-Print Network [OSTI]

    Bonnen, C. A. (Clarence Alfred); Czarowitz, P. H. (Philmore Hempel)

    1942-01-01T23:59:59.000Z

    , affeptiny but few farms. Because of the local nature of hail storms they may have no widespread effect upon farm incomes, but may cause partial or complete crop failures on a few farms. Damage to young crors from wind results through the rapid movement...A. B. CONNER. DIRECTOR \\ College Station, Texas \\ i 'i RULLETIS SO. 61'1 SEPTEJPEER 1942 I -4. INFORMATION BASIC TO FARM ADJUST- BTENTS IN THE ROLLING PLAIXS AREA4 OF TEXAS Di~sion of Farm nncl Xwnch Economics 3ULTURAL AND MECH...

  7. A computer test bench for checking and adjusting the automatic regulators of generator excitation systems

    SciTech Connect (OSTI)

    Dovganyuk, I. Ya.; Labunets, I. A.; Plotnikova, T. V.; Sokur, P. V. [Affiliate of the 'NTTs Elektroenergetiki' Company - Scientific Research Institute of Electric Power (VNIIE) (Russian Federation)

    2008-05-15T23:59:59.000Z

    A computer test bench for testing and debugging natural samples of the automatic excitation regulation systems of generators, the protection units and the power part of the excitation system is described. The bench includes a personal computer with specialized input-output circuit boards for analog and digital signals, and enables the time and cost involved in developing and checking control systems to be reduced considerably. The program employed operates in real time and enables the automatic excitation regulators of synchronous generators and generators with longitudinal-transverse excitation in a specific power system to be adjusted.

  8. U.S. Coalbed Methane Proved Reserves Adjustments (Billion Cubic Feet)

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40 Buildingto17 34 44Year Jan Feb Mar Apr May Jun602 1,397 125 QL1.PastAdjustments

  9. U.S. Natural Gas Plant Liquids, Reserves Adjustments (Million Barrels)

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40CoalLease(Billion Cubic Feet)Year Jan Feb Mar Apr May Jun2009Adjustments (Million

  10. Property:OpenEI/UtilityRate/EnergyRateStructure/Tier4Adjustment | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkinsInformation DemandReactivePowerCharge JumpEnergy Information Tier4Adjustment

  11. 3 C E 301 Civil Engineering Systems * (fall or spring) 3 CH 302 Principles of Chemistry II * 3 CH 301 Principles of Chemistry I * 4 M 408D Seq, Series & Multivariable Calculus *

    E-Print Network [OSTI]

    Lightsey, Glenn

    S Probability & Statistics for Civil Engineers * 3 E M 306 Statics * 3 E M 319 Mechanics of Solids requirements. Approved Math/Science/ Engineering Science Elective ______________ Approved Science Elective3 C E 301 Civil Engineering Systems * (fall or spring) 3 CH 302 Principles of Chemistry II * 3 CH

  12. VOLUME 83, NUMBER 2 P H Y S I C A L R E V I E W L E T T E R S 12 JULY 1999 Carbon Isotope Effect in Single-Crystal Rb3C60

    E-Print Network [OSTI]

    Fuhrer, Michael S

    abundance and 99% 13 C-enriched Rb3C60 reveal the carbon isotope effect with unprecedented accuracy have similar (99%) isotopic enrichment. Time-of-flight mass spectrometry and secondary-ion mass spectrometry verified the purity and isotopic enrichment of the C60. Vapor transport from C60 powder using

  13. Fair Labor Standard Act and Service Contract Act Price Adjustment UT-B Contracts Div Page 1 of 1

    E-Print Network [OSTI]

    Pennycook, Steve

    Fair Labor Standard Act and Service Contract Act ­ Price Adjustment UT-B Contracts Div Sept 2009 Page 1 of 1 flsa-price-adj-ext-sept09.doc FAIR LABOR STANDARDS ACT AND SERVICE CONTRACT ACT - PRICE

  14. Impact of Input Voltage Sag and Unbalance on DC Link Inductor and Capacitor Stress in Adjustable Speed Drives

    E-Print Network [OSTI]

    Lipo, Thomas

    , outages, voltage surges and sags. Power quality problems induced in adjustable-speed drives (ASDs) have (120 Hz for 60 Hz system) that increases the electrical stresses on the dc bus choke inductor (if used

  15. Modeling household adoption of earthquake hazard adjustments: a longitudinal panel study of Southern California and Western Washington residents 

    E-Print Network [OSTI]

    Arlikatti, Sudha S

    2006-10-30T23:59:59.000Z

    This research, aimed at advancing the theory of environmental hazard adjustment processes by contrasting households from three cities in a high seismic hazard area with households from three other cities in a moderate ...

  16. Expanded Prussian Blue Analogues Incorporating [Re6Se8(CN)6]3-/4-Clusters: Adjusting Porosity via Charge Balance

    E-Print Network [OSTI]

    Shores, Matthew P.

    Expanded Prussian Blue Analogues Incorporating [Re6Se8(CN)6]3-/4- Clusters: Adjusting Porosity via of octahedral [M(CN)6]3-/4- complexes for the synthesis of microporous Prussian blue type solids with adjustable to be a direct expansion of Prussian blue (Fe4[Fe(CN)6]3,14H2O), with [Re6Se8(CN)6]4- clusters connected through

  17. Dual capacity compressor with reversible motor and controls arrangement therefor

    DOE Patents [OSTI]

    Sisk, Francis J. (Washington Township, Fayette County, PA)

    1980-12-02T23:59:59.000Z

    A hermetic reciprocating compressor such as may be used in heat pump applications is provided for dual capacity operation by providing the crankpin of the crankshaft with an eccentric ring rotatably mounted thereon, and with the end of the connecting rod opposite the piston encompassing the outer circumference of the eccentric ring, with means limiting the rotation of the eccentric ring upon the crankpin between one end point and an opposite angularly displaced end point to provide different values of eccentricity depending upon which end point the eccentric ring is rotated to upon the crankpin, and a reversible motor in the hermetic shell of the compressor for rotating the crankshaft, the motor operating in one direction effecting the angular displacement of the eccentric ring relative to the crankpin to the one end point, and in the opposite direction effecting the angular displacement of the eccentric ring relative to the crankpin to the opposite end point, this arrangement automatically giving different stroke lengths depending upon the direction of motor rotation. The mechanical structure of the arrangement may take various forms including at least one in which any impact of reversal is reduced by utilizing lubricant passages and chambers at the interface area of the crankpin and eccentric ring to provide a dashpot effect. In the main intended application of the arrangement according to the invention, that is, in a refrigerating or air conditioning system, it is desirable to insure a delay during reversal of the direction of compressor operation. A control arrangement is provided in which the control system controls the direction of motor operation in accordance with temperature conditions, the system including control means for effecting operation in a low capacity direction or alternatively in a high capacity direction in response to one set, and another set, respectively, of temperature conditions and with timer means delaying a restart of the compressor motor for at least a predetermined time in response to a condition of the control means operative to initiate a change in the operating direction of the compressor when it restarts.

  18. Resonant frequency detection and adjustment method for a capacitive transducer with differential transformer bridge

    SciTech Connect (OSTI)

    Hu, M.; Bai, Y. Z., E-mail: abai@mail.hust.edu.cn; Zhou, Z. B., E-mail: zhouzb@mail.hust.edu.cn; Li, Z. X.; Luo, J. [MOE Key Laboratory of Fundamental Physical Quantities Measurement, School of Physics, Huazhong University of Science and Technology, Wuhan 430074 (China)] [MOE Key Laboratory of Fundamental Physical Quantities Measurement, School of Physics, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2014-05-15T23:59:59.000Z

    The capacitive transducer with differential transformer bridge is widely used in ultra-sensitive space accelerometers due to their simple structure and high resolution. In this paper, the front-end electronics of an inductive-capacitive resonant bridge transducer is analyzed. The analysis result shows that the performance of this transducer depends upon the case that the AC pumping frequency operates at the resonance point of the inductive-capacitive bridge. The effect of possible mismatch between the AC pumping frequency and the actual resonant frequency is discussed, and the theoretical analysis indicates that the output voltage noise of the front-end electronics will deteriorate by a factor of about 3 due to either a 5% variation of the AC pumping frequency or a 10% variation of the tuning capacitance. A pre-scanning method to determine the actual resonant frequency is proposed followed by the adjustment of the operating frequency or the change of the tuning capacitance in order to maintain expected high resolution level. An experiment to verify the mismatching effect and the adjustment method is provided.

  19. Method, system and apparatus for monitoring and adjusting the quality of indoor air

    DOE Patents [OSTI]

    Hartenstein, Steven D.; Tremblay, Paul L.; Fryer, Michael O.; Hohorst, Frederick A.

    2004-03-23T23:59:59.000Z

    A system, method and apparatus is provided for monitoring and adjusting the quality of indoor air. A sensor array senses an air sample from the indoor air and analyzes the air sample to obtain signatures representative of contaminants in the air sample. When the level or type of contaminant poses a threat or hazard to the occupants, the present invention takes corrective actions which may include introducing additional fresh air. The corrective actions taken are intended to promote overall health of personnel, prevent personnel from being overexposed to hazardous contaminants and minimize the cost of operating the HVAC system. The identification of the contaminants is performed by comparing the signatures provided by the sensor array with a database of known signatures. Upon identification, the system takes corrective actions based on the level of contaminant present. The present invention is capable of learning the identity of previously unknown contaminants, which increases its ability to identify contaminants in the future. Indoor air quality is assured by monitoring the contaminants not only in the indoor air, but also in the outdoor air and the air which is to be recirculated. The present invention is easily adaptable to new and existing HVAC systems. In sum, the present invention is able to monitor and adjust the quality of indoor air in real time by sensing the level and type of contaminants present in indoor air, outdoor and recirculated air, providing an intelligent decision about the quality of the air, and minimizing the cost of operating an HVAC system.

  20. On Ergodic Secrecy Capacity for Gaussian MISO Wiretap Channels

    E-Print Network [OSTI]

    Li, Jiangyuan

    2010-01-01T23:59:59.000Z

    A Gaussian multiple-input single-output (MISO) wiretap channel model is considered, where there exists a transmitter equipped with multiple antennas, a legitimate receiver and an eavesdropper each equipped with a single antenna. We study the problem of finding the optimal input covariance that achieves ergodic secrecy capacity subject to a power constraint where only statistical information about the eavesdropper channel is available at the transmitter. This is a non-convex optimization problem that is in general difficult to solve. Existing results address the case in which the eavesdropper or/and legitimate channels have independent and identically distributed Gaussian entries with zero-mean and unit-variance, i.e., the channels have trivial covariances. This paper addresses the general case where eavesdropper and legitimate channels have nontrivial covariances. A set of equations describing the optimal input covariance matrix are proposed along with an algorithm to obtain the solution. Based on this framew...