Powered by Deep Web Technologies
Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Spiso-3D operation manual (US Patent 8,077,945 B2) Section 1. Introduction : Spiso-3D is an automated software calculating optical 3D  

E-Print Network (OSTI)

1 Spiso-3D operation manual (US Patent 8,077,945 B2) Section 1. Introduction : Spiso-3D is an automated software calculating optical 3D images of neurons mathematically to analyze dendrites and spines (= post synapses). Spiso-3D software was developed by Kawato's laboratory (University of Tokyo

Kawato, Suguru

2

Persistent Ocean Monitoring with Underwater Gliders: Path Plans and Adapting Sampling Resolution 3D/4D  

E-Print Network (OSTI)

, penalized for navigating through waters of large magnitude ocean currents, and is length constrained. AlongPersistent Ocean Monitoring with Underwater Gliders: Path Plans and Adapting Sampling Resolution 3D Abstract Ocean processes are dynamic and complex events that occur on multiple different spatial

Frandsen, Jannette B.

3

The WOCE-era 3-D Pacific Ocean circulation and heat budget A.M. Macdonald a,*, S. Mecking b  

E-Print Network (OSTI)

The WOCE-era 3-D Pacific Ocean circulation and heat budget A.M. Macdonald a,*, S. Mecking b , P was that of Ganachaud (1999), which refined several prior global analyses (Macdonald, 1998; Macdonald and Wunsch, 1996

Talley, Lynne D.

4

Airport Viz - A 3D Tool to Enhance Security Operations | ornl...  

NLE Websites -- All DOE Office Websites (Extended Search)

Airport Viz - A 3D Tool to Enhance Security Operations June 12, 2013 Problem Statement: Airport security personnel needed an easy-to-use tool to investigate passenger checkpoint...

5

A 3D radiative transfer framework: I. non-local operator splitting and continuum scattering problems  

E-Print Network (OSTI)

We describe a highly flexible framework to solve 3D radiation transfer problems in scattering dominated environments based on a long characteristics piece-wise parabolic formal solution and an operator splitting method. We find that the linear systems are efficiently solved with iterative solvers such as Gauss-Seidel and Jordan techniques. We use a sphere-in-a-box test model to compare the 3D results to 1D solutions in order to assess the accuracy of the method. We have implemented the method for static media, however, it can be used to solve problems in the Eulerian-frame for media with low velocity fields.

Peter H. Hauschildt; E. Baron

2006-01-09T23:59:59.000Z

6

Reliable and Fault-Tolerant Software-Defined Network Operations Scheme for Remote 3D Printing  

Science Journals Connector (OSTI)

The recent wide expansion of applicable three-dimensional (3D) printing and software-defined networking (SDN) technologies ... of responsiveness and reliability of SDN for remote 3D printing and control processes...

Dongkyun Kim; Joon-Min Gil

2014-12-01T23:59:59.000Z

7

150 IEEE JOURNAL OF OCEANIC ENGINEERING, VOL. 34, NO. 2, APRIL 2009 Large Area 3-D Reconstructions From  

E-Print Network (OSTI)

relief. We present a complete and validated system for processing optical images acquired from by matching overlapping submaps. The final stage of processing is a bundle adjustment that provides the 3-D hydrothermal vents and spreading ridges in geology [2], ancient shipwrecks and settle- ments in archeology [

Eustice, Ryan

8

3D building reconstruction and thermal mapping in fire brigade operations  

Science Journals Connector (OSTI)

Fire fighting remains a dangerous profession despite many recent technological and organizational measures. Sensors and technical systems can augment the performance of fire fighters to increase safety and efficiency during operation. An important aspect ... Keywords: augmented reality, fire fighter safety, real-time dense reconstruction, thermal camera

Christian Sch鰊auer; Emanuel Vonach; Georg Gerstweiler; Hannes Kaufmann

2013-03-01T23:59:59.000Z

9

Mean, variance, and temporal coherence of the 3D acoustic field forward propagated through random inhomogeneities in continental-shelf and deep ocean waveguides  

E-Print Network (OSTI)

When an acoustic field propagates through a multimodal waveguide, the effect of variations in medium properties induced by 3D random inhomogeneities accumulates by multiple forward scattering over range. This causes ...

Chen, Tianrun

2009-01-01T23:59:59.000Z

10

www.cesos.ntnu.no Author Centre for Ships and Ocean Structures Offshore Wind Turbine Operation  

E-Print Network (OSTI)

1 www.cesos.ntnu.no Author 颅 Centre for Ships and Ocean Structures Offshore Wind Turbine Operation icing for offshore Wind Turbines ? 路 Wherever there is sea icing ! 路 Temperature bellow zero degree Structures Outline 路 Introduction 路 Wind Turbine Operational Conditions 路 Wind Turbine Operation under

N酶rv氓g, Kjetil

11

Symbology development for a 3D conformal synthetic vision helmet-mounted display for helicopter operations in degraded visual environment  

Science Journals Connector (OSTI)

To increase situation awareness for helicopter pilots in poor visibility symbology for a helmet-mounted display was developed. The symbology comprises the conformal presentation of obstacles, route information and threat areas. In an online survey 48 ... Keywords: conformal symbology, degraded visual environment, helicopter operations, helmet-mounted display, synthetic vision systems

Patrizia Knabl; Helmut T鯾ben

2013-07-01T23:59:59.000Z

12

Bulletin of the Australian Meteorological and Oceanographic Society Vol.18 page 104 BLUElink> Progress on operational ocean prediction for Australia  

E-Print Network (OSTI)

of the three- dimensional ocean state (temperature, salinity and pressure) and currents for the short BLUElink> Progress on operational ocean prediction for Australia Gary B. Brassington1 , Graham Warren1 are now on standby. At their disposal are analyses and forecasts from the Bureau's new operational ocean

Oke, Peter

13

Oil and Gas CDT Development of a SUNTANS Baroclinic Model for 3D Oil  

E-Print Network (OSTI)

Oil and Gas CDT Development of a SUNTANS Baroclinic Model for 3D Oil Pollution Tracking Heriot) Key Words Oil Spill, HF Radar, Trajectory Forecasting, Hydrodynamic Modelling, Oil Chemistry Overview In an oil spill emergency, an operational system must forecast ocean and weather conditions in addition

Henderson, Gideon

14

3D NUCLEAR SEGMENTAT  

Energy Science and Technology Software Center (OSTI)

003029WKSTN00 Delineation of nuclear structures in 3D multicellular systems https://vision.lbl.gov/Software/3DMorphometry/

15

3D heart reconstruction.  

E-Print Network (OSTI)

??The purpose of this thesis was to achieve a 3D reconstruction of the four heart chambers using 2D echocardiographic images. A level set algorithm based (more)

Roxo, Diogo

2011-01-01T23:59:59.000Z

16

F3D  

Energy Science and Technology Software Center (OSTI)

003188MLTPL00 F3D Image Processing and Analysis for Many - and Multi-core Platforms http://camera.lbl.gov/software

17

Graphene's 3D Counterpart  

NLE Websites -- All DOE Office Websites (Extended Search)

Print ALS researchers have discovered a material that is essentially a 3D version of graphene-the 2D sheets of carbon through which electrons race at many times the speed at which...

18

Graphene's 3D Counterpart  

NLE Websites -- All DOE Office Websites (Extended Search)

08:59 ALS researchers have discovered a material that is essentially a 3D version of graphene-the 2D sheets of carbon through which electrons race at many times the speed at which...

19

3D Plasmon Ruler  

SciTech Connect

In this animation of a 3D plasmon ruler, the plasmonic assembly acts as a transducer to deliver optical information about the structural dynamics of an attached protein. (courtesy of Paul Alivisatos group)

None

2011-01-01T23:59:59.000Z

20

3D Computer Vision and Video Computing 3D Vision3D Vision  

E-Print Network (OSTI)

3D Computer Vision and Video Computing 3D Vision3D Vision CSC I6716 Fall 2010 Topic 1 of Part II Camera Models Zhigang Zhu, City College of New York zhu@cs.ccny.cuny.edu #12;3D Computer Vision and Video Computing 3D Vision3D Vision Closely Related Disciplines Image Processing 颅 images to mages Computer

Zhu, Zhigang

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

3D Computer Vision and Video Computing 3D Vision3D Vision  

E-Print Network (OSTI)

1 3D Computer Vision and Video Computing 3D Vision3D Vision Topic 1 of Part II Camera Models CSC I6716 Spring2011 Zhigang Zhu, City College of New York zhu@cs.ccny.cuny.edu 3D Computer Vision and Video Computing 3D Vision3D Vision Closely Related Disciplines Image Processing 颅 images to mages Computer

Zhu, Zhigang

22

Quantum 3D superstrings  

Science Journals Connector (OSTI)

The classical Green-Schwarz superstring action, with N=1 or N=2 spacetime supersymmetry, exists for spacetime dimensions D=3, 4, 6, 10, but quantization in the light-cone gauge breaks Lorentz invariance unless either D=10, which leads to critical superstring theory, or D=3. We give details of results presented previously for the bosonic and N=1 closed 3D (super)strings and extend them to the N=2 3D superstring. In all cases, the spectrum is parity-invariant and contains anyons of irrational spin.

Luca Mezincescu and Paul K. Townsend

2011-11-08T23:59:59.000Z

23

Introduction to 3D Printing  

Science Journals Connector (OSTI)

Three-dimensional (3D) printing has evolved dramatically in the last few years. 3D printers have become plentiful and affordable enough ... can own one. Indeed, the cost of 3D printers (as little as $200 USD) ......

Charles Bell

2014-01-01T23:59:59.000Z

24

Grey-box modeling of an ocean vessel for operational optimization  

Science Journals Connector (OSTI)

Operational optimization of ocean vessels, both off-line and in real-time, is becoming increasingly important due to rising fuel cost and added environmental constraints. Accurate and efficient simulation models are needed to achieve maximum energy efficiency. In this paper a grey-box modeling approach for the simulation of ocean vessels is presented. The modeling approach combines conventional analysis models based on physical principles (a white-box model) with a feed forward neural-network (a black-box model). Two different ways of combining these models are presented, in series and in parallel. The results of simulating several trips of a medium sized container vessel show that the grey-box modeling approach, both serial and parallel approaches, can improve the prediction of the vessel fuel consumption significantly compared to a white-box model. However, a prediction of the vessel speed is only improved slightly. Furthermore, the results give an indication of the potential advantages of grey-box models, which is extrapolation beyond a given training data set and the incorporation of physical phenomena which are not modeled in the white-box models. Finally, included is a discussion on how to enhance the predictability of the grey-box models as well as updating the neural-network in real-time.

Leifur . Leifsson; Hildur S鎣arsd髏tir; Sven . Sigur餾son; Ari V閟teinsson

2008-01-01T23:59:59.000Z

25

3d X 3d X SrTiO3Ti 2p 3d  

E-Print Network (OSTI)

XX 3d X 3d X X XX X XX SrTiO3Ti 2p 3d SrTiO3Ti 2p 3d 2p 2p SrTiO3 ts) 2p3/2 (t2g) 2p3/2 (e ) 2p1/2 (eg)2p SrTiO3 3d unit (t2g) (eg) (eg)2p1/2 (t2g)3d (Ti Fe Cu) arb. ( 2g) (Ti, Fe, Cu) y(ansitynten 3d In 3d 468464460456 路 Photon Energy (e

Katsumoto, Shingo

26

3D scanning for personal 3D printing: build your own desktop 3D scanner  

Science Journals Connector (OSTI)

3D Printing has entered the mainstream. Multiple low cost desktop 3D printers are currently available from various vendors, and open source projects let hobbyists build their own. This course addresses the problem of creating 3D models for 3D printing. ...

Gabriel Taubin; Daniel Moreno; Douglas Lanman

2014-07-01T23:59:59.000Z

27

The Nereus Hybrid Underwater Robotic Vehicle for Global Ocean Science Operations to 11,000m Depth  

E-Print Network (OSTI)

is to provide the U.S. oceanographic community with the first capable and cost- effective vehicle for routineThe Nereus Hybrid Underwater Robotic Vehicle for Global Ocean Science Operations to 11,000m Depth-- This paper reports an overview of the new Nereus hybrid underwater vehicle and summarizes the vehicle's per

Whitcomb, Louis L.

28

3D Computer Vision and Video Computing 3D Vision3D Vision  

E-Print Network (OSTI)

1 3D Computer Vision and Video Computing 3D Vision3D Vision CSc I6716 Fall 2010 Topic 3 of Part II Stereo Vision Zhigang Zhu, City College of New York zhu@cs.ccny.cuny.edu 3D Computer Vision and Video Computing Stereo VisionStereo Vision Problem Infer 3D structure of a scene from two or more images taken

Zhu, Zhigang

29

3D Computer Vision and Video Computing 3D Vision3D Vision  

E-Print Network (OSTI)

1 3D Computer Vision and Video Computing 3D Vision3D Vision CSc I6716 Spring 2011 Topic 3 of Part II Stereo Vision p g Zhigang Zhu, City College of New York zhu@cs.ccny.cuny.edu 3D Computer Vision and Video Computing Stereo VisionStereo Vision Problem Infer 3D structure of a scene from two or more images

Zhu, Zhigang

30

3D modeling with silhouettes  

E-Print Network (OSTI)

With the increasing power of computers and the spread of dedicated graphics hardware, 3D content has become ubiquitous in every field, from medicine to video games. However, designing 3D models remains a time-consuming and ...

Rivers, Alec (Alec Rothmyer)

2010-01-01T23:59:59.000Z

31

Slicing a 3D Model  

Science Journals Connector (OSTI)

This chapter and the next are the core of this book抯 explanation of the 3D printing process. 3D printers cannot use a computer...slicing.

Joan Horvath

2014-01-01T23:59:59.000Z

32

The Desktop 3D Printer  

Science Journals Connector (OSTI)

In Chapter 1 we saw that 3D printing has a 30-year history spanning a ... technical, legal, and societal shifts in the 3D-printing market since the major patents in the...

Joan Horvath

2014-01-01T23:59:59.000Z

33

3 D interactive pictorial maps  

E-Print Network (OSTI)

of simplififcation and exaggeration.. . . . . . . . . . . . . . 21 8 3 D polygonal text in Maya. . . . . . . . . . . . . . . . . . . . . . . . 22 9 Final 3 D model of Italy with text. . . . . . . . . . . . . . . . . . . . 23 10 Top view of 3 D model of France... the files in a format that is suitable for web viewing. 15 CHAPTER IV METHODOLOGY There are three major steps to making an interactive pictorial map. The fifrst step is to build the 3 D model using a modeling software, Maya. The second step is to apply...

Naz, Asma

2005-02-17T23:59:59.000Z

34

3D Printed Bionic Ears  

Science Journals Connector (OSTI)

(bottom) a 3D printer used for the printing process. ... Figure 2A shows the 3D printed bionic ear immediately after printing. ... A student version of the Autodesk 3ds Max software package was used to modify and render the 3D images. ...

Manu S. Mannoor; Ziwen Jiang; Teena James; Yong Lin Kong; Karen A. Malatesta; Winston O. Soboyejo; Naveen Verma; David H. Gracias; Michael C. McAlpine

2013-05-01T23:59:59.000Z

35

3D Tissue Scaffolds BIOMATERIALS  

E-Print Network (OSTI)

3D Tissue Scaffolds BIOMATERIALS Our goal is to develop measurement tools and reference materials for assessing the impact of the physical and chemical properties of 3D tissue scaffolds on cellular response. These tools will be used to explore the relationship between cellular response on 2D surfaces to that in 3D

36

3D World Building System  

SciTech Connect

This video provides an overview of the Sandia National Laboratories developed 3-D World Model Building capability that provides users with an immersive, texture rich 3-D model of their environment in minutes using a laptop and color and depth camera.

None

2013-10-30T23:59:59.000Z

37

3D World Building System  

ScienceCinema (OSTI)

This video provides an overview of the Sandia National Laboratories developed 3-D World Model Building capability that provides users with an immersive, texture rich 3-D model of their environment in minutes using a laptop and color and depth camera.

None

2014-02-26T23:59:59.000Z

38

Imaging atoms in 3-D  

ScienceCinema (OSTI)

Berkeley Lab's Peter Ercius discusses "Imaging atoms in 3-D" in this Oct. 28, 2013 talk, which is part of a Science at the Theater event entitled Eight Big Ideas

Ercius, Peter

2014-06-27T23:59:59.000Z

39

3D nonparametric neural identification  

Science Journals Connector (OSTI)

This paper presents the state identification study of 3D partial differential equations (PDEs) using the differential neural networks (DNNs) approximation. There are so many physical situations in applied mathematics and engineering that can be described ...

Rita Q. Fuentes; Isaac Chairez; Alexander Poznyak; Tatyana Poznyak

2012-01-01T23:59:59.000Z

40

3D Polygon Rendering Pipeline Michael Kazhdan  

E-Print Network (OSTI)

3D Polygon Rendering Pipeline Michael Kazhdan (600.357 / 600.457) HB Ch. 12 FvDFH Ch. 6, 18.3 #12;3D Polygon Rendering 路 Many applications use rendering of 3D polygons with direct illumination #12;3D Polygon Rendering 路 Many applications use rendering of 3D polygons with direct illumination Half-Life 2

Kazhdan, Michael

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

3D Polygon Rendering Pipeline Michael Kazhdan  

E-Print Network (OSTI)

3D Polygon Rendering Pipeline Michael Kazhdan (600.357 / 600.457) HB Ch. 12 FvDFH Ch. 6, 18.3 #12;3D Polygon Rendering 路 Many applications use rendering of 3D polygons with direct illumination #12;3D Polygon Rendering 路 Many applications use rendering of 3D polygons with direct illumination Crysis 3

Kazhdan, Michael

42

3-D Model for Deactivation & Decommissioning  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Project & Identifier Project & Identifier Tech Stage: Deployment In-Situ Decommissioning: SR09171 SRS Area Closure Projects: PBS SR-0040 3-D models of the R reactor building and P reactor vessel were delivered to SRS Area Closure Projects Page 1 of 2 Tech Fact Sheet Savannah River Site South Carolina 3-D Model for Deactivation & Decommissioning Challenge Planning for the safe and controlled deactivation and decommissioning (D&D) of highly contaminated nuclear facilities requires that engineers and managers fully understand the work space in which personnel and equipment will operate. It also requires that they effectively communicate safety concerns and work sequences to the personnel who will perform the work. This crucial knowledge is conveyed in

43

Voxel octree intersection based 3D scanning.  

E-Print Network (OSTI)

??Recent developments in the field of three dimensional (3D) printing have resulted in widely available low-cost 3D printers. These printers require 3D models, which are (more)

Bennett, Joel

2014-01-01T23:59:59.000Z

44

Characterization of 3D Photovoltaics  

E-Print Network (OSTI)

Characterization of 3D Photovoltaics SEMICONDUCTORS Our goal is to provide industry with test structures and models of next-generation photovoltaics, with an initial focus on cadmium telluride (Cd (nanostructured) photovoltaic devices. Objective Impact and Customers 路 The U.S. Photovoltaic Industry Roadmap

45

3D Printed Shelby Cobra  

Energy.gov (U.S. Department of Energy (DOE))

ORNL's newly printed 3D car will be showcased at the 2015 NAIAS in Detroit. This "laboratory on wheels" uses the Shelby Cobra design, celebrating the 50th anniversary of this model and honoring the first vehicle to be voted a national monument. The Shelby will allow research and development of integrated components to be tested and enhanced in real time, improving the use of sustainable, digital manufacturing solutions in the automotive industry.

46

3D Imaging Technology Conference & Applications Workshop  

E-Print Network (OSTI)

2nd London 3D Imaging Technology Conference & Applications Workshop 3D scanning and vertical, Greece, bilalis@dpem.tuc.gr Abstract. The new 3D scanning technology had changed the way and opened new from some 3D scanning approaches, which were applied for the first time in the southern part of Europe

Aristomenis, Antoniadis

47

3D N = 4 Gauge Theory Compactication  

E-Print Network (OSTI)

Outline 3D N = 4 Gauge Theory Compactication Twistors 3D N = 4 Supersymmetric Gauge Theories and Hyperk篓ahler Metrics Richard Eager UCSB Friday, October 17th, 2008, 4:00 p.m. Richard Eager UCSB 3D N = 4 Supersymmetric Gauge Theories and Hyperk篓ahler M #12;Outline 3D N = 4 Gauge Theory Compactication Twistors

Bigelow, Stephen

48

Fast 3D keypoints detector and descriptor for view-based 3D objects recognition  

E-Print Network (OSTI)

Fast 3D keypoints detector and descriptor for view-based 3D objects recognition Ayet Shaiek1 Abstract. In this paper, we propose a new 3D object recognition method that employs a set of 3D keypoints extracted from point cloud representation of 3D views. The method makes use of the 2D organization of range

Paris-Sud XI, Universit茅 de

49

A 3D radiative transfer framework: II. line transfer problems  

E-Print Network (OSTI)

Higher resolution telescopes as well as 3D numerical simulations will require the development of detailed 3D radiative transfer calculations. Building upon our previous work we extend our method to include both continuum and line transfer. We present a general method to calculate radiative transfer including scattering in the continuum as well as in lines in 3D static atmospheres. The scattering problem for line transfer is solved via means of an operator splitting (OS) technique. The formal solution is based on a long-characteristics method. The approximate $\\Lambda$ operator is constructed considering nearest neighbors {\\em exactly}. The code is parallelized over both wavelength and solid angle using the MPI library. We present the results of several test cases with different values of the thermalization parameter and two choices for the temperature structure. The results are directly compared to 1D spherical tests. With our current grid setup the interior resolution is much lower in 3D than in 1D, nevertheless the 3D results agree very well with the well-tested 1D calculations. We show that with relatively simple parallelization that the code scales to very large number of processors which is mandatory for practical applications. Advances in modern computers will make realistic 3D radiative transfer calculations possible in the near future. Our current code scales to very large numbers of processors, but requires larger memory per processor at high spatial resolution.

E. Baron; Peter H. Hauschildt

2007-03-16T23:59:59.000Z

50

A Brief History of 3D Printing  

Science Journals Connector (OSTI)

Enormous hype surrounds 3D printing, with predictions that it will spur a ... manufacturing facility. There are many areas where 3D printing really is creating significant change, particularly in...

Joan Horvath

2014-01-01T23:59:59.000Z

51

Part removal of 3D printed parts  

E-Print Network (OSTI)

An experimental study was performed to understand the correlation between printing parameters in the FDM 3D printing process, and the force required to remove a part from the build platform of a 3D printing using a patent ...

Pe馻 Doll, Mateo

2014-01-01T23:59:59.000Z

52

ArrangePak-3D User's Manual  

E-Print Network (OSTI)

ArrangePak-3D User's Manual File Planes Options Help Quit Planes: 5 颅120.2732,+28.2707 poweredbyLEDA ArrangePak颅3D #12; #12; ArrangePak-3D User's Manual Manipulating Arrangements of Planes in Three- chantability or #12;tness for a particular purpose. version 1.0x License: The ArrangePak-3D source code

Wismath, Stephen

53

Digital Pygmalion Accurate 3D reconstruction  

E-Print Network (OSTI)

;Overview 路 Accurate 3D reconstruction from uncalibrated cameras (motion and lighting) 路 Multi-view stereo - 3D shape from uncalibrated images (review) 路 Multi-view photometric stereo with uncalibrated lights reconstruction of streets #12;Trumpington Street Data #12;3D reconstruction #12;Reconstruction texture mapped #12

Cipolla, Roberto

54

3D Printing Prof. Hank Dietz  

E-Print Network (OSTI)

3D Printing Prof. Hank Dietz TCMS, March 14, 2014 University of Kentucky Electrical & Computer #12;3D With Glue Layers of paper: printed with glue & cut Layers of powder: printed with glue Can also be printed in full color #12;3D Extrusion (RepRaps) FDM: Fused Deposition Modeling FFF: Fused

Dietz, Henry G. "Hank"

55

3D Sparse Representations Lanusse F. a  

E-Print Network (OSTI)

3D Sparse Representations Lanusse F. a Starck J.-L. a Woiselle A. c Fadili M.J. b a Laboratoire AIM Securite, 95101 Argenteuil CEDEX, France. Abstract In this chapter we review a variety of 3D sparse representations developed in recent years and adapted to different kinds of 3D signals. In particular, we describe

Starck, Jean-Luc

56

3D Imaging Of Wet Granular Matter  

E-Print Network (OSTI)

3D Imaging Of Wet Granular Matter Leonard Goff Advisor: Dr. Wolfgang Losert With Application to Penetrometer Insertion #12;3D Imaging Of Wet Granular Matter Leonard Goff, Advisor: Dr. Wolfgang Losert CoffeeSand Gravel Oops! #12;3D Imaging Of Wet Granular Matter Leonard Goff, Advisor: Dr. Wolfgang Losert

Anlage, Steven

57

3D Postprozessor Diplomarbeit von Samuel Gerber  

E-Print Network (OSTI)

3D Postprozessor Diplomarbeit von Samuel Gerber Fachhochschule Aargau FHA University of Applied篓angsschnitt . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.3.4 Querschnit . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.3.5 3D-Bilder . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.4 3D Ansicht . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.5 Bericht

Gerber, Samuel

58

Supersymmetric Gauge Theories in 3d  

E-Print Network (OSTI)

Supersymmetric Gauge Theories in 3d Nathan Seiberg IAS #12;The Search for Fundamental Physics Dine. 8 #12;Supersymmetric Gauge Theories in 3d Nathan Seiberg IAS Based on work with Aharony, Intriligator, Razamat, and Willett, to appear #12;3d SUSY Gauge Theories 路 New lessons about dynamics

California at Santa Cruz, University of

59

2D 3D * iklee)@yonsei.ac.kr  

E-Print Network (OSTI)

1 2012 2D 3D * 0 , 1 , 2 0,2 1 ( 0 skrcjstk, 2 iklee)@yonsei.ac.kr 1 rinthel Science, Yonsei University. 1 Dept. of Information Media, The University of Suwon. 2D 3D . 2D - , 3D (Disparity) 3D . . 1. 3D 3D . 3D 3D [1

Lee, In-Kwon

60

Ocean Wave Energy Systems Design: Conceptual Design Methodology for the Operational Matching of the Wells Air Turbine  

Science Journals Connector (OSTI)

The paper has set out a conceptual design methodology that was employed in the design of a Wells air turbine for OWC ocean wave energy plants. In particular, the ... sizing, given the range and frequency of power

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Hollywood 3D: Recognizing Actions in 3D Natural Scenes Simon Hadfield Richard Bowden  

E-Print Network (OSTI)

Hollywood 3D: Recognizing Actions in 3D Natural Scenes Simon Hadfield Richard Bowden Centre-class variations. It is made even more challenging when complex 3D actions are projected down to the image plane, losing a great deal of information. The recent emergence of 3D data, both in broadcast content

Bowden, Richard

62

3D Imaging Symposium, Friday 11:00 3D APPROACHES IN PALEOANTHROPOLOGY USING GEOMETRIC MOR-  

E-Print Network (OSTI)

3D Imaging Symposium, Friday 11:00 3D APPROACHES IN PALEOANTHROPOLOGY USING GEOMETRIC MOR, Eugene, OR; ROSENBERGER, Alfred, Brooklyn College/CUNY, Brooklyn, NY The emergence of 3D GM (geometric- ble to easily collect data in a true 3D sense, such as sets of homologous landmarks or com- plete

Delson, Eric

63

3D Multiprocessor with 3D NoC Architecture Based on Tezzaron Technology  

E-Print Network (OSTI)

1 3D Multiprocessor with 3D NoC Architecture Based on Tezzaron Technology M.H Jabbar1,2 , D. Houzet the architecture and implementation of 3D multiprocessor with 3D NoC. The 2 tiers design is based on 16 processors simulation, the purpose of this work is to accurately measure NoC performances in real 3D chip when running

Paris-Sud XI, Universit茅 de

64

3D Site Response using NLSSI  

Energy.gov (U.S. Department of Energy (DOE))

3D Site Response using NLSSI Justin Coleman, P.E. Bob Spears Nuclear Science and Technology Idaho National Laboratory October 22, 2014

65

Advanced 3D Sensing and Visualization System for Unattended Monitoring  

SciTech Connect

The purpose of this project was to create a reliable, 3D sensing and visualization system for unattended monitoring. The system provides benefits for several of Sandia's initiatives including nonproliferation, treaty verification, national security and critical infrastructure surety. The robust qualities of the system make it suitable for both interior and exterior monitoring applications. The 3D sensing system combines two existing sensor technologies in a new way to continuously maintain accurate 3D models of both static and dynamic components of monitored areas (e.g., portions of buildings, roads, and secured perimeters in addition to real-time estimates of the shape, location, and motion of humans and moving objects). A key strength of this system is the ability to monitor simultaneous activities on a continuous basis, such as several humans working independently within a controlled workspace, while also detecting unauthorized entry into the workspace. Data from the sensing system is used to identi~ activities or conditions that can signi~ potential surety (safety, security, and reliability) threats. The system could alert a security operator of potential threats or could be used to cue other detection, inspection or warning systems. An interactive, Web-based, 3D visualization capability was also developed using the Virtual Reality Modeling Language (VRML). The intex%ace allows remote, interactive inspection of a monitored area (via the Internet or Satellite Links) using a 3D computer model of the area that is rendered from actual sensor data.

Carlson, J.J.; Little, C.Q.; Nelson, C.L.

1999-01-01T23:59:59.000Z

66

A Brief Introduction to Ocean Oil Spills Professor Tommy Dickey, Secretary of the Navy/Chief of Naval Operations  

E-Print Network (OSTI)

, ecosystems (sfc. and beach organisms + birds most affected) -impacts depend on form of hydrocarbons (i to the ocean. 85% of petroleum input (~700,000 bbls) in N. America waters comes from land runoff (i.e., from Impacts to Marine Life + Oil affects birds temp., buoyancy, flight, physiology (toxicity) + Mammals

Fabrikant, Sara Irina

67

Bootstrapping Mixed Correlators in the 3D Ising Model  

E-Print Network (OSTI)

We study the conformal bootstrap for systems of correlators involving non-identical operators. The constraints of crossing symmetry and unitarity for such mixed correlators can be phrased in the language of semidefinite programming. We apply this formalism to the simplest system of mixed correlators in 3D CFTs with a $\\mathbb{Z}_2$ global symmetry. For the leading $\\mathbb{Z}_2$-odd operator $\\sigma$ and $\\mathbb{Z}_2$-even operator $\\epsilon$, we obtain numerical constraints on the allowed dimensions $(\\Delta_\\sigma, \\Delta_\\epsilon)$ assuming that $\\sigma$ and $\\epsilon$ are the only relevant scalars in the theory. These constraints yield a small closed region in $(\\Delta_\\sigma, \\Delta_\\epsilon)$ space compatible with the known values in the 3D Ising CFT.

Kos, Filip; Simmons-Duffin, David

2014-01-01T23:59:59.000Z

68

A PARALLEL ADAPTIVE 3D MHD SCHEME FOR MODELING CORONAL AND SOLAR WIND PLASMA FLOWS  

E-Print Network (OSTI)

A PARALLEL ADAPTIVE 3D MHD SCHEME FOR MODELING CORONAL AND SOLAR WIND PLASMA FLOWS C. P. T. GROTH, Oceanic and Space Sciences, University of Michigan, Ann Arbor, MI 48109颅2143, USA K. G. POWELL Department of Aerospace Engineering, University of Michigan, Ann Arbor, MI 48109颅2118, USA Abstract. A parallel adaptive

De Zeeuw, Darren L.

69

3-D seismology in the Arabian Gulf  

SciTech Connect

Since 1977 when Aramco and GSI (Geophysical Services International) pioneered the first 3-D seismic survey in the Arabian Gulf, under the guidance of Aramco`s Chief Geophysicist John Hoke, 3-D seismology has been effectively used to map many complex subsurface geological phenomena. By the mid-1990s extensive 3-D surveys were acquired in Abu Dhabi, Oman, Qatar and Saudi Arabia. Also in the mid-1990`s Bahrain, Kuwait and Dubai were preparing to record surveys over their fields. On the structural side 3-D has refined seismic maps, focused faults and fractures systems, as well as outlined the distribution of facies, porosity and fluid saturation. In field development, 3D has not only reduced drilling costs significantly, but has also improved the understanding of fluid behavior in the reservoir. In Oman, Petroleum Development Oman (PDO) has now acquired the first Gulf 4-D seismic survey (time-lapse 3D survey) over the Yibal Field. The 4-D survey will allow PDO to directly monitor water encroachment in the highly-faulted Cretaceous Shu`aiba reservoir. In exploration, 3-D seismology has resolved complex prospects with structural and stratigraphic complications and reduced the risk in the selection of drilling locations. The many case studies from Saudi Arabia, Oman, Qatar and the United Arab Emirates, which are reviewed in this paper, attest to the effectiveness of 3D seismology in exploration and producing, in clastics and carbonates reservoirs, and in the Mesozoic and Paleozoic.

Al-Husseini, M. [Gulf PetroLink, Manama (Bahrain); Chimblo, R. [Saudi Aramco, Dhahran (Saudi Arabia)

1995-08-01T23:59:59.000Z

70

3, 35433588, 2003 3-D air pollution  

E-Print Network (OSTI)

ACPD 3, 3543颅3588, 2003 3-D air pollution modelling L. M. Frohn et al. Title Page Abstract hemispheric nested air pollution model L. M. Frohn, J. H. Christensen, J. Brandt, C. Geels, and K. M. Hansen 2003 Correspondence to: L. M. Frohn (lmf@dmu.dk) 3543 #12;ACPD 3, 3543颅3588, 2003 3-D air pollution

Boyer, Edmond

71

BEAMS3D Neutral Beam Injection Model  

SciTech Connect

With the advent of applied 3D fi elds in Tokamaks and modern high performance stellarators, a need has arisen to address non-axisymmetric effects on neutral beam heating and fueling. We report on the development of a fully 3D neutral beam injection (NBI) model, BEAMS3D, which addresses this need by coupling 3D equilibria to a guiding center code capable of modeling neutral and charged particle trajectories across the separatrix and into the plasma core. Ionization, neutralization, charge-exchange, viscous velocity reduction, and pitch angle scattering are modeled with the ADAS atomic physics database [1]. Benchmark calculations are presented to validate the collisionless particle orbits, neutral beam injection model, frictional drag, and pitch angle scattering effects. A calculation of neutral beam heating in the NCSX device is performed, highlighting the capability of the code to handle 3D magnetic fields.

Lazerson, Samuel

2014-04-14T23:59:59.000Z

72

3D modellering og pathfinding i Java; 3D Modeling and Pathfinding in Java.  

E-Print Network (OSTI)

??English: This project explores the performance of Java3D through a large 3D?model and the possibility of running this model with a pathfinding algorithm from an (more)

Thorlund, Steffen

2009-01-01T23:59:59.000Z

73

3D view with pst-vue3d Manuel Luque (mluque5130@aol.com)  

E-Print Network (OSTI)

3D view with pst-vue3d Manuel Luque (mluque5130@aol.com) in cooperation with Herbert Vo? (voss@perce.de) 13th August 2004 1 Presentation The 3D representation of an object or a landscape is one of the most (cube, sphere etc. . . ) and many other things. I want to signal that 路 Regarding 3D representation, one

Mintmire, John W.

74

3D2D3D photonic crystal heterostructures fabricated by direct laser writing  

E-Print Network (OSTI)

3D颅2D颅3D photonic crystal heterostructures fabricated by direct laser writing M. Deubel and M fabricate photoresist templates for 3D颅2D颅3D photonic crystal heterostruc- tures for what we believe for the microfabrication and testing of broadband, 3D air颅waveguide microcir- cuitry in photonic bandgap materials. 漏 2006

John, Sajeev

75

The VAMOS Ocean-Cloud-Atmosphere-Land Study Regional Experiment (VOCALS-REx): Goals, platforms, and field operations  

SciTech Connect

The VAMOS Ocean-Cloud-Atmosphere-Land Study Regional Experiment (VOCALS-REx) was an international field program designed to make observations of poorly understood but critical components of the coupled climate system of the southeast Pacific. This region is characterized by strong coastal upwelling, the coolest SSTs in the tropical belt, and is home to the largest subtropical stratocumulus deck on Earth. The field intensive phase of VOCALS-REx took place during October and November 2008 and constitutes a critical part of a broader CLIVAR program (VOCALS) designed to develop and promote scientific activities leading to improved understanding, model simulations, and predictions of the southeastern Pacific (SEP) coupled ocean-atmosphere-land system, on diurnal to interannual timescales. The other major components of VOCALS are a modeling program with a model hierarchy ranging from the local to global scales, and a suite of extended observations from regular research cruises, instrumented moorings, and satellites. The two central themes of VOCALS-REx focus upon (a) links between aerosols, clouds and precipitation and their impacts on marine stratocumulus radiative properties, and (b) physical and chemical couplings between the upper ocean and the lower atmosphere, including the role that mesoscale ocean eddies play. A set of hypotheses designed to be tested with the combined field, monitoring and modeling work in VOCALS is presented here. A further goal of VOCALS-REx is to provide datasets for the evaluation and improvement of large-scale numerical models. VOCALS-REx involved five research aircraft, two ships and two surface sites in northern Chile. We describe the instrument payloads and key mission strategies for these platforms and give a summary of the missions conducted.

Wood, R.; Springston, S.; Mechoso, C. R.; Bretherton, C. S.; A.Weller, R.; Huebert, B.; Straneo, F.; Albrecht, B. A.; Coe, H.; Allen, G.; Vaughan, G.; Daum, P.; Fairall, C.; Chand, D.; Klenner, L. G.; Garreaud, R.; Grados, C.; Covert, D. S.; Bates, T. S.; Krejci, R.; Russell, L. M.; Szoeke, S. d.; Brewer, A.; Yuter, S. E.; Chaigneau, A.; Toniazzo, T.; Minnis, P.; Palikonda, R.; Abel, S. J.; Brown, W. O. J.; Williams, S.; Fochesatto, J.; Brioude, J.; Bower, K. N

2011-01-21T23:59:59.000Z

76

3D packaging for integrated circuit systems  

SciTech Connect

A goal was set for high density, high performance microelectronics pursued through a dense 3D packing of integrated circuits. A {open_quotes}tool set{close_quotes} of assembly processes have been developed that enable 3D system designs: 3D thermal analysis, silicon electrical through vias, IC thinning, mounting wells in silicon, adhesives for silicon stacking, pretesting of IC chips before commitment to stacks, and bond pad bumping. Validation of these process developments occurred through both Sandia prototypes and subsequent commercial examples.

Chu, D.; Palmer, D.W. [eds.

1996-11-01T23:59:59.000Z

77

Investigations in massive 3D gravity  

SciTech Connect

Some interesting gravitational properties of the Bergshoeff-Hohm-Townsend model (massive 3D gravity), such as the presence of a short-range gravitational force in the nonrelativistic limit and the existence of an impact-parameter-dependent gravitational deflection angle, are studied. Interestingly enough, these phenomena have no counterpart in the usual Einstein 3D gravity. In order to better understand the two aforementioned gravitational properties, they are also analyzed in the framework of 3D higher-derivative gravity with the Einstein-Hilbert term with the 'wrong sign'.

Accioly, Antonio [Laboratorio de Fisica Experimental (LAFEX), Centro Brasileiro de Pesquisas Fisicas (CBPF), Rua Dr. Xavier Sigaud 150, Urca, 22290-180, Rio de Janeiro, RJ (Brazil); Instituto de Fisica Teorica (IFT), Sao Paulo State University (UNESP), Rua Dr. Bento Teobaldo Ferraz 271, Bloco II-Barra Funda, 01140-070, Sao Paulo, SP (Brazil); Helayeel-Neto, Jose; Morais, Jefferson; Turcati, Rodrigo [Laboratorio de Fisica Experimental (LAFEX), Centro Brasileiro de Pesquisas Fisicas (CBPF), Rua Dr. Xavier Sigaud 150, Urca, 22290-180, Rio de Janeiro, RJ (Brazil); Scatena, Eslley [Instituto de Fisica Teorica (IFT), Sao Paulo State University (UNESP), Rua Dr. Bento Teobaldo Ferraz 271, Bloco II-Barra Funda, 01140-070, Sao Paulo, SP (Brazil)

2011-05-15T23:59:59.000Z

78

MT3D: a 3 dimensional magnetotelluric modeling program (user's guide and documentation for Rev. 1)  

SciTech Connect

MT3D.REV1 is a non-interactive computer program written in FORTRAN to do 3-dimensional magnetotelluric modeling. A 3-D volume integral equation has been adapted to simulate the MT response of a 3D body in the earth. An integro-difference scheme has been incorporated to increase the accuracy. This is a user's guide for MT3D.REV1 on the University of Utah Research Institute's (UURI) PRIME 400 computer operating under PRIMOS IV, Rev. 17.

Nutter, C.; Wannamaker, P.E.

1980-11-01T23:59:59.000Z

79

3D MHD Modeling of the Galaxy  

Science Journals Connector (OSTI)

We show the results of our 3D MHD simulations of the flow of the Galactic ... synthetic l - v and v - b diagrams for an imaginary observer inside our modeled...

G. C. G髆ez; D. P. Cox

2005-01-01T23:59:59.000Z

80

Printed 3D Multi-View Images  

Science Journals Connector (OSTI)

The technique to produce full-parallax 3D multi-view still pictures is described. The matrix of source views (from 6x6 to 15x15 views) is built from computer-generated images or...

Kim, Sung-Sik; Son, Kwang-Hun; Saveljev, V V; Son, Jung-Young

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Internet video streaming using 3-D SPIHT  

E-Print Network (OSTI)

several years. Video streaming involves video compression, protocols selection for streaming media, client/receiver buffer management and packet loss recovery. This thesis documents a new Internet video streaming system based on the state-of-the-art 3-D...

Jiang, Jianhong

2012-06-07T23:59:59.000Z

82

3D face recognition with wireless transportation  

E-Print Network (OSTI)

In this dissertation, we focus on two related parts of a 3D face recognition system with wireless transportation. In the ?rst part, the core components of the system, namely, the feature extraction and classi?cation component, are introduced...

Zou, Le

2009-05-15T23:59:59.000Z

83

Three dimensional (3D) optical information processing  

E-Print Network (OSTI)

Light exhibits dramatically different properties when it propagates in or interacts with 3D structured media. Comparing to 2D optical elements where the light interacts with a sequence of surfaces separated by free space, ...

Tian, Kehan

2006-01-01T23:59:59.000Z

84

3D Spectroscopy and the Virtual Observatory  

E-Print Network (OSTI)

Integral field, or 3D, spectroscopy is the technique of obtaining spectral information over a two-dimensional, hopefully contiguous, field of view. While there is some form of astronomical 3D spectroscopy at all wavelengths, there has been a rapid increase in interest in optical and near-infrared 3D spectroscopy. This has resulted in the deployment of a large variety of integral-field spectrographs on most of the large optical/infrared telescopes. The amount of IFU data available in observatory archives is large and growing rapidly. The complications of treating IFU data as both imaging and spectroscopy make it a special challenge for the virtual observatory. This article describes the various techniques of optical and near-infrared spectroscopy and some of the general needs and issues related to the handling of 3D data by the virtual observatory.

Bryan W. Miller

2007-08-15T23:59:59.000Z

85

3D TORUS V1.0  

Energy Science and Technology Software Center (OSTI)

002440MLTPL00 3D Torus Routing Engine Module for OFA OpenSM v. 1.0 http://www.openfabrics.org/git?p=sashak/management.git;a=sum

86

RELAP5-3D Developer Guidelines and Programming Practices  

SciTech Connect

Our ultimate goal is to create and maintain RELAP5-3D as the best software tool available to analyze nuclear power plants. This begins with writing excellent programming and requires thorough testing. This document covers development of RELAP5-3D software, the behavior of the RELAP5-3D program that must be maintained, and code testing. RELAP5-3D must perform in a manner consistent with previous code versions with backward compatibility for the sake of the users. Thus file operations, code termination, input and output must remain consistent in form and content while adding appropriate new files, input and output as new features are developed. As computer hardware, operating systems, and other software change, RELAP5-3D must adapt and maintain performance. The code must be thoroughly tested to ensure that it continues to perform robustly on the supported platforms. The coding must be written in a consistent manner that makes the program easy to read to reduce the time and cost of development, maintenance and error resolution. The programming guidelines presented her are intended to institutionalize a consistent way of writing FORTRAN code for the RELAP5-3D computer program that will minimize errors and rework. A common format and organization of program units creates a unifying look and feel to the code. This in turn increases readability and reduces time required for maintenance, development and debugging. It also aids new programmers in reading and understanding the program. Therefore, when undertaking development of the RELAP5-3D computer program, the programmer must write computer code that follows these guidelines. This set of programming guidelines creates a framework of good programming practices, such as initialization, structured programming, and vector-friendly coding. It sets out formatting rules for lines of code, such as indentation, capitalization, spacing, etc. It creates limits on program units, such as subprograms, functions, and modules. It establishes documentation guidance on internal comments. The guidelines apply to both existing and new subprograms. They are written for both FORTRAN 77 and FORTRAN 95. The guidelines are not so rigorous as to inhibit a programmer抯 unique style, but do restrict the variations in acceptable coding to create sufficient commonality that new readers will find the coding in each new subroutine familiar. It is recognized that this is a 搇iving document and must be updated as languages, compilers, and computer hardware and software evolve.

Dr. George L Mesina

2014-03-01T23:59:59.000Z

87

Lightweight 3D Modeling of Urban Buildings From Range Data Department of Computer Science  

E-Print Network (OSTI)

scanning, range data, segmentation, Google SketchUp, vectorization I. INTRODUCTION The 3D modeling of urban such as Google SketchUp. A key idea is that a simple set of extrusion and tapering operations applied to 2D

Wolberg, George

88

Exploration 3-D Seismic Field Test/Native Tribes Initiative  

SciTech Connect

To determine current acquisition procedures and costs and to further the goals of the President's Initiative for Native Tribes, a seismic-survey project is to be conducted on Osage tribal lands. The goals of the program are to demonstrate the capabilities, costs, and effectiveness of 3-D seismic work in a small-operator setting and to determine the economics of such a survey. For these purposes, typical small-scale independent-operator practices are being followed and a shallow target chose in an area with a high concentration of independent operators. The results will be analyzed in detail to determine if there are improvements and/or innovations which can be easily introduced in field-acquisition procedures, in processing, or in data manipulation and interpretation to further reduce operating costs and to make the system still more active to the small-scale operator.

Carroll, Herbert B.; Chen, K.C.; Guo, Genliang; Johnson, W.I.; Reeves,T.K.; Sharma,Bijon

1999-04-27T23:59:59.000Z

89

Short Communication Three ocean state indices implemented in  

E-Print Network (OSTI)

, and currents at various resolutions. We briefly present the OFS, then describe three currently available oceanShort Communication Three ocean state indices implemented in the Mercator-Ocean operational suite L., and Soulat, F. 2008. Three ocean state indices implemented in the Mercator-Ocean operational suite. 颅 ICES

Ribes, Aur茅lien

90

3D Self-Portraits Etienne Vouga2  

E-Print Network (OSTI)

scanning pose change output reconstruction textured reconstruction large variety of examples3D print Figure for applications such as online avatars or 3D printing (the miniature shown here was printed using a ZPrinter 650 and accurate cap- ture system for 3D self-portraits using a single 3D sensor. Figure 2: 3D printed miniatures

O'Brien, James F.

91

3D Engineered Models for Construction Support & Available Tools  

E-Print Network (OSTI)

3D Engineered Models for Construction Support & Available Tools #12;3D Engineered Models for Construction 路 New web page www.fhwa.dot.gov/3d (search "fhwa 3D") 颅 Specs, Standards, Details, Tech Briefs 颅 Provides initial response within 24 hours of inquiry National Website and TSSC 2 #12;3D Engineered Models

92

3D Keypoints Detection for Objects Recognition Ayet Shaiek1  

E-Print Network (OSTI)

3D Keypoints Detection for Objects Recognition Ayet Shaiek1 , and Fabien Moutarde1 1 Robotics a new 3D object recognition method that employs a set of 3D local features extracted from point cloud representation of 3D views. The method makes use of the 2D organization of range data produced by 3D sensor

Paris-Sud XI, Universit茅 de

93

AES Encryption and Decryption Using Direct3D 10 API  

E-Print Network (OSTI)

Current video cards (GPUs - Graphics Processing Units) are very programmable, have become much more powerful than the CPUs and they are very affordable. In this paper, we present an implementation for the AES algorithm using Direct3D 10 certified GPUs. The graphics API Direct3D 10 is the first version that allows the use of integer operations, making from the traditional GPUs (that works only with floating point numbers), General Purpose GPUs that can be used for a large number of algorithms, including encryption. We present the performance of the symmetric key encryption algorithm - AES, on a middle range GPU and on a middle range quad core CPU. On the testing system, the developed solution is almost 3 times faster on the GPU than on one single core CPU, showing that the GPU can perform as an efficient cryptographic accelerator.

Chiuta, Adrian Marius

2012-01-01T23:59:59.000Z

94

Beam Optics Analysis - An Advanced 3D Trajectory Code  

SciTech Connect

Calabazas Creek Research, Inc. has completed initial development of an advanced, 3D program for modeling electron trajectories in electromagnetic fields. The code is being used to design complex guns and collectors. Beam Optics Analysis (BOA) is a fully relativistic, charged particle code using adaptive, finite element meshing. Geometrical input is imported from CAD programs generating ACIS-formatted files. Parametric data is inputted using an intuitive, graphical user interface (GUI), which also provides control of convergence, accuracy, and post processing. The program includes a magnetic field solver, and magnetic information can be imported from Maxwell 2D/3D and other programs. The program supports thermionic emission and injected beams. Secondary electron emission is also supported, including multiple generations. Work on field emission is in progress as well as implementation of computer optimization of both the geometry and operating parameters. The principle features of the program and its capabilities are presented.

Ives, R. Lawrence; Bui, Thuc; Vogler, William; Neilson, Jeff; Read, Mike [Calabazas Creek Research, Inc., 20937 Comer Drive, Saratoga, CA 95070-3753 (United States); Shephard, Mark; Bauer, Andrew; Datta, Dibyendu [Scientific Center for Computational Research, Rensselaer Polytechnic Institute, Troy NY 12180 (United States); Beal, Mark [Simmetrix, Inc., Clifton Park, NY 12065 (United States)

2006-01-03T23:59:59.000Z

95

NORTH HILL CREEK 3-D SEISMIC EXPLORATION PROJECT  

SciTech Connect

Wind River Resources Corporation (WRRC) received a DOE grant in support of its proposal to acquire, process and interpret fifteen square miles of high-quality 3-D seismic data on non-allotted trust lands of the Uintah and Ouray (Ute) Indian Reservation, northeastern Utah, in 2000. Subsequent to receiving notice that its proposal would be funded, WRRC was able to add ten square miles of adjacent state and federal mineral acreage underlying tribal surface lands by arrangement with the operator of the Flat Rock Field. The twenty-five square mile 3-D seismic survey was conducted during the fall of 2000. The data were processed through the winter of 2000-2001, and initial interpretation took place during the spring of 2001. The initial interpretation identified multiple attractive drilling prospects, two of which were staked and permitted during the summer of 2001. The two initial wells were drilled in September and October of 2001. A deeper test was drilled in June of 2002. Subsequently a ten-well deep drilling evaluation program was conducted from October of 2002 through March 2004. The present report discusses the background of the project; design and execution of the 3-D seismic survey; processing and interpretation of the data; and drilling, completion and production results of a sample of the wells drilled on the basis of the interpreted survey. Fifteen wells have been drilled to test targets identified on the North Hill Creek 3-D Seismic Survey. None of these wildcat exploratory wells has been a dry hole, and several are among the best gas producers in Utah. The quality of the data produced by this first significant exploratory 3-D survey in the Uinta Basin has encouraged other operators to employ this technology. At least two additional 3-D seismic surveys have been completed in the vicinity of the North Hill Creek Survey, and five additional surveys are being planned for the 2004 field season. This project was successful in finding commercial oil, natural gas and natural gas liquids production on a remote part of the Uintah & Ouray Reservation. Much of the natural gas and natural gas liquids are being produced from the Wingate Formation, which to our knowledge has never produced commercially anywhere. Another large percentage of the natural gas is being produced from the Entrada Formation which has not previously produced in this part of the Uinta Basin. In all, at least nine geologic formations are contributing hydrocarbons to these wells. This survey has clearly established the fact that high-quality data can be obtained in this area, despite the known obstacles.

Marc T. Eckels; David H. Suek; Denise H. Harrison; Paul J. Harrison

2004-05-06T23:59:59.000Z

96

A support-operator method for 3-D rupture dynamics  

Science Journals Connector (OSTI)

......faulting) is also capable of handling geometries appropriate to low-angle...variables by deltat/2. The material variables incorporate the hexahedral...elastic isotropic medium. The material and fault parameters for TPV3...parameters. Figure 2. Schematic diagram of the model configuration......

Geoffrey P. Ely; Steven M. Day; Jean-Bernard Minster

2009-06-01T23:59:59.000Z

97

Superplastic forming using NIKE3D  

SciTech Connect

The superplastic forming process requires careful control of strain rates in order to avoid strain localizations. A load scheduler was developed and implemented into the nonlinear finite element code NIKE3D to provide strain rate control during forming simulation and process schedule output. Often the sheets being formed in SPF are very thin such that less expensive membrane elements can be used as opposed to shell elements. A large strain membrane element was implemented into NIKE3D to assist in SPF process modeling.

Puso, M.

1996-12-04T23:59:59.000Z

98

3D printing of multifunctional nanocomposites  

Science Journals Connector (OSTI)

Summary Additive manufacturing (aka, 3D printing) holds strong potential for the formation of a new class of multifunctional nanocomposites. With the ability to print complex 3D objects layer by layer, additive manufacturing with nanomaterials could be leveraged in new ways toward greater control over material properties across part dimensions. Multifunctionality through embedding of nanomaterials can further extend capabilities of nanocomposites to properties such as gradients in thermal and electrical conductivity, photonic emissions tunable for wavelength, and increased strength and reduced weight. Here we discuss the promises offered by nanomaterials-based additive manufacturing as a new paradigm for nanocomposite functionality.

Thomas A. Campbell; Olga S. Ivanova

2013-01-01T23:59:59.000Z

99

3D Modeling Engine Representation Summary Report  

SciTech Connect

Computers have been used for 3D modeling and simulation, but only recently have computational resources been able to give realistic results in a reasonable time frame for large complex models. This summary report addressed the methods, techniques, and resources used to develop a 3D modeling engine to represent risk analysis simulation for advanced small modular reactor structures and components. The simulations done for this evaluation were focused on external events, specifically tsunami floods, for a hypothetical nuclear power facility on a coastline.

Steven Prescott; Ramprasad Sampath; Curtis Smith; Timothy Yang

2014-09-01T23:59:59.000Z

100

3D-3D registration of free formed objects using shape and texture Fernando C. M. Martins  

E-Print Network (OSTI)

3D-3D registration of free formed objects using shape and texture Fernando C. M. Martins , Hirohisa and orientation of the object in 3D space with respect to an arbitrary fixed reference, given the current measurement and the 3D object model under construction. Measurement integration is the updating of the 3D

Moura, Jos茅

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

A 3D Printed Fluidic Device that Enables Integrated Features  

Science Journals Connector (OSTI)

Fluorescence Detector for Capillary Separations Fabricated by 3D Printing ... Fluorescence Detector for Capillary Separations Fabricated by 3D Printing ... Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences ...

Kari B. Anderson; Sarah Y. Lockwood; R. Scott Martin; Dana M. Spence

2013-05-21T23:59:59.000Z

102

A 3D Computer Simulation Test of the Leibowitz Hypothesis  

E-Print Network (OSTI)

Barton & Cohn A 3D Computer Simulation Test of the Leibowitzan experiment using a 3D visual simulator in which differentthan smaller ones. The use of 3D visual simulators to assess

Barton, Joseph E.; Cohn, Theodore E

2007-01-01T23:59:59.000Z

103

3D Magnetotelluic characterization of the Coso Geothermal Field  

E-Print Network (OSTI)

and Neubauer, F. M. , 2003, 3D inversion of a scalar radio3D MAGNETOTELLURIC CHARACTERIZATION OF THE COSO GEOTHERMALMT imaging. An initial 3D conductivity model was constructed

Newman, Gregory A.; Hoversten, G. Michael; Wannamaker, Philip E.; Gasperikova, Erika

2008-01-01T23:59:59.000Z

104

Physical sectioning in 3D biological microscopy  

E-Print Network (OSTI)

developed in the Brain Networks Laboratory at Texas A&M University, has been used for the purpose of this study. However, the modes of characterizing chatter and its measurement are equally applicable to all current variants of 3D biological microscopy using...

Guntupalli, Jyothi Swaroop

2008-10-10T23:59:59.000Z

105

Physical sectioning in 3D biological microscopy  

E-Print Network (OSTI)

developed in the Brain Networks Laboratory at Texas A&M University, has been used for the purpose of this study. However, the modes of characterizing chatter and its measurement are equally applicable to all current variants of 3D biological microscopy using...

Guntupalli, Jyothi Swaroop

2009-05-15T23:59:59.000Z

106

Printing 3D Catalytic Devices | The Ames Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Printing 3D Catalytic Devices Ames Laboratory scientist Igor Slowing discusses using 3D printers to create new materials, including catalysts...

107

Advanced 3D Geophysical Imaging Technologies for Geothermal Resource...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced 3D Geophysical Imaging Technologies for Geothermal Resource Characterization Advanced 3D Geophysical Imaging Technologies for Geothermal Resource Characterization Advanced...

108

Advanced 3D Geophysical Imaging Technologies for Geothermal Resource...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced 3D Geophysical Imaging Technologies for Geothermal Resource Characterization Advanced 3D Geophysical Imaging Technologies for Geothermal Resource Characterization DOE...

109

D3-D7 holographic dual of a perturbed 3D CFT  

Science Journals Connector (OSTI)

An appropriately oriented D3-D7-brane system is the holographic dual of relativistic fermions occupying a 2+1-dimensional defect embedded in a 3+1-dimensional spacetime. The fermions interact via fields of N=4 Yang-Mills theory in the 3+1-dimensional bulk. Recently, using internal flux to stabilize the system in the probe N7?N3 limit, a number of solutions which are dual to conformal field theories with fermion content have been found. We use holographic techniques to study perturbations of a particular one of the conformal field theories by relevant operators. Generally, the response of a conformal field theory to such a perturbation grows and becomes nonperturbative at low energy scales. We shall find that a perturbation which switches on a background magnetic field B and fermion mass m induces a renormalization group flow that can be studied perturbatively in the limit of small m2/B. We solve the leading order explicitly. We find that, for one particular value of internal flux, the system exhibits magnetic catalysis, the spontaneous breaking of chiral symmetry enhanced by the presence of the magnetic field. In the process, we derive formulas predicting the Debye screening length of the fermion-antifermion plasma at finite density and the diamagnetic moment of the ground state of the fermion system in the presence of a magnetic field.

Hamid Omid and Gordon W. Semenoff

2013-07-10T23:59:59.000Z

110

3d mirror symmetry as a canonical transformation  

E-Print Network (OSTI)

We generalize the free Fermi-gas formulation of certain 3d ${\\cal N}=3$ supersymmetric Chern-Simons-matter theories by allowing Fayet-Iliopoulos couplings as well as mass terms for bifundamental matter fields. The resulting partition functions are given by simple modifications of the argument of the Airy function found previously. With these extra parameters it is easy to see that mirror-symmetry corresponds to linear canonical transformations on the phase space (or operator algebra) of the 1-dimensional fermions.

Drukker, Nadav

2015-01-01T23:59:59.000Z

111

Fiber reinforcement during 3D printing  

Science Journals Connector (OSTI)

Abstract Three-dimensional (3D) printing is an attractive rapid prototyping technology for the fabrication of 3D structures by the localized deposition of a reactive binder liquid onto thin powder layers in predominantly technical applications. A practical limitation is often the low green strength of printed samples, which can lead to a collapse of large and fragile structures during removal from the powder bed and the following depowdering procedure. Fibre reinforcement may improve green mechanical properties of printed samples, which was investigated in this study using a range of different short fibres added to a matrix of cellulose-modified gypsum powder. Mechanical testing of printed samples revealed a bending strength increase of 180% and up to 10 times higher work of fracture values compared to non-reinforced printed samples.

Susanne Christ; Martin Schnabel; Elke Vorndran; J黵gen Groll; Uwe Gbureck

2015-01-01T23:59:59.000Z

112

3-D Metals | Open Energy Information  

Open Energy Info (EERE)

Metals Metals Jump to: navigation, search Name 3-D Metals Facility 3-D Metals Sector Wind energy Facility Type Small Scale Wind Facility Status In Service Location Valley City OH Coordinates 41.2481362掳, -81.88305616掳 Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.2481362,"lon":-81.88305616,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

113

3D-Printing Spatially Varying BRDFs  

Science Journals Connector (OSTI)

A new method fabricates custom surface reflectance and spatially varying bidirectional reflectance distribution functions (svBRDFs). Researchers optimize a microgeometry for a range of normal distribution functions and simulate the resulting surface's ... Keywords: Three-dimensional displays,Printing,Fabrication,Computational modeling,Solid modeling,Printers,Face recognition,computer graphics,bidirectional reflectance distribution function,BRDF,spatially varying bidirectional reflectance distribution function,svBRDF,3D printing,normal distribution function,NDF,microgeometry,surface reflectance

Olivier Rouiller; Bernd Bickel; Wojciech Matusik; Marc Alexa; Jan Kautz

2013-11-01T23:59:59.000Z

114

3D Imaging with Holographic Tomography  

Science Journals Connector (OSTI)

There are two main types of tomography that enable the 3D internal structures of objects to be reconstructed from scattered data. The commonly known computerized tomography (CT) give good results in the x?ray wavelength range where the filtered back?projection theorem and Radon transform can be used. These techniques rely on the Fourier projection?slice theorem where rays are considered to propagate straight through the object. Another type of tomography called 慸iffraction tomography applies in applications in optics and acoustics where diffraction and scattering effects must be taken into account. The latter proves to be a more difficult problem as light no longer travels straight through the sample. Holographic tomography is a popular way of performing diffraction tomography and there has been active experimental research on reconstructing complex refractive index data using this approach recently. However there are two distinct ways of doing tomography: either by rotation of the object or by rotation of the illumination while fixing the detector. The difference between these two setups is intuitive but needs to be quantified. From Fourier optics and information transformation point of view we use 3D transfer function analysis to quantitatively describe how spatial frequencies of the object are mapped to the Fourier domain. We first employ a paraxial treatment by calculating the Fourier transform of the defocused OTF. The shape of the calculated 3D CTF for tomography by scanning the illumination in one direction only takes on a form that we might call a 抪eanut compared to the case of object rotation where a diablo is formed the peanut exhibiting significant differences and non?isotropy. In particular there is a line singularity along one transverse direction. Under high numerical aperture conditions the paraxial treatment is not accurate and so we make use of 3D analytical geometry to calculate the behaviour in the non?paraxial case. This time we obtain a similar peanut but without the line singularity.

Colin J. R. Sheppard; Shan Shan Kou

2010-01-01T23:59:59.000Z

115

CAN 3D PRINTING REVOLUTIONIZE GLOBAL MANUFACTURING? A DELPHI STUDY  

E-Print Network (OSTI)

CAN 3D PRINTING REVOLUTIONIZE GLOBAL MANUFACTURING? A DELPHI STUDY 颅 Master Thesis Proposal 颅 BACKGROUND 3D printing (or additive manufacturing) is not an entirely new phenomenon. First introduced and president of Foxconn, calls it a nice "gimmick" and even Nick Allen, founder of 3D printing company 3D Print

116

3D Printing of Functional and Biological Materials  

E-Print Network (OSTI)

! 3D Printing of Functional and Biological Materials Jennifer A. Lewis Wyss Professor)! Multimaterial 3D printing ! #12;3D antennas! Li ion microbatteries! Lightweight microlattices!Flexible sensors! 3D Printing of Integrated Electronic Devices ! #12;20 nm average , 5 颅 50 nm

117

3D Model Retrieval based on Adaptive Views Clustering  

E-Print Network (OSTI)

3D Model Retrieval based on Adaptive Views Clustering Tarik Filali Ansary1 , Mohamed Daoudi2 , Jean.daoudi@univ-tours.fr http://www-rech.enic.fr/miire Abstract. In this paper, we propose a method for 3D model indexing based selection of 2D views from a 3D model, and a probabilistic Bayesian method for 3D model retrieval from

Paris-Sud XI, Universit茅 de

118

Stress relief: improving structural strength of 3D printable objects  

Science Journals Connector (OSTI)

The use of 3D printing has rapidly expanded in the past couple of years. It is now possible to produce 3D-printed objects with exceptionally high fidelity and precision. However, although the quality of 3D printing has improved, both the time to print ... Keywords: 3D printing, physics-based modeling, structural analysis

Ondrej Stava; Juraj Vanek; Bedrich Benes; Nathan Carr; Radom韗 M?ch

2012-08-01T23:59:59.000Z

119

3D REGULARIZED VELOCITY FROM 3D DOPPLER RADIAL VELOCITY X. Chen, J.L. Barron, R.E. Mercer  

E-Print Network (OSTI)

3D REGULARIZED VELOCITY FROM 3D DOPPLER RADIAL VELOCITY X. Chen, J.L. Barron, R.E. Mercer Dept, Ontario, M3H 5T4 Paul.Joe@ec.gc.ca ABSTRACT The recent availability of sequences of 3D Doppler radial velocity datasets provides sufficient information to estimate the 3D velocity of Doppler storms. We present

Barron, John

120

Spiso-3D (USA Patent 8,077,945 B2) Section 1. "Spiso-3D" 3  

E-Print Network (OSTI)

1 Spiso-3D (USA Patent 8,077,945 B2) Section 1. "Spiso-3D" 3 BioInfomatics I(x) Taylor, Java 3D . graphic card graphic card . Trial version of Spiso Google down-load Neurolucida 2%Spiso-3D Kawato's laboratory Homepage http://glia.c.u-tokyo.ac.jp #12;2 Section 1, Introduction

Kawato, Suguru

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

3D as a content, 3D as a metaphor. Experiments on distributing and interfacing information about historic artefacts using  

E-Print Network (OSTI)

3D as a content, 3D as a metaphor. Experiments on distributing and interfacing information about MAP, France jyb@gamsau.map.archi.fr idu@gamsau.map.archi.fr Key Words Architectural heritage, 3D The importance we attach to 3D is probably related to the manner we perceive the world. Humans in general seem

Paris-Sud XI, Universit茅 de

122

A 3D INTENSITY MODEL BASED ON SPHERICAL HARMONICS FOR AUTOMATIC 3D SEGMENTATION OF HETEROCHROMATIN FOCI  

E-Print Network (OSTI)

A 3D INTENSITY MODEL BASED ON SPHERICAL HARMONICS FOR AUTOMATIC 3D SEGMENTATION OF HETEROCHROMATIN DKFZ Heidelberg and BIOQUANT, Research Group Genome Organization & Function ABSTRACT We introduce a 3D model-based approach for automatic segmentation of 3D fluorescent heterochromatin foci from microscopy

Rippe, Karsten

123

3D GAUSSIAN DESCRIPTOR: A NEW DESCRIPTOR FOR 3D MODELS Mohamed Chaouch and Anne Verroust-Blondet  

E-Print Network (OSTI)

3D GAUSSIAN DESCRIPTOR: A NEW DESCRIPTOR FOR 3D MODELS Mohamed Chaouch and Anne Verroust.chaouch, anne.verroust}@inria.fr ABSTRACT This paper presents a new approach to 3D shape compari- son Shape Benchmark database. Index Terms-- 3D shape retrieval, Gaussian transform 1. INTRODUCTION

Paris-Sud XI, Universit茅 de

124

1998 3D GIS vs Advanced visualisation -Hack & Ozmutlu -LWI Seminar 1 3D-GIS vs Advanced Visualization  

E-Print Network (OSTI)

1998 3D GIS vs Advanced visualisation - Hack & Ozmutlu - LWI Seminar 1 3D-GIS vs Advanced Visualization Hack H.R.G.K. and Ozmutlu S. LWI seminar 1998 Delft, The Netherlands #12;1998 3D GIS vs Advanced visualisation - Hack & Ozmutlu - LWI Seminar 2 3D-GIS vs Advanced Visualization Visualization Strategy At source

Hack, Robert

125

Does 3D increase the enjoyment experience? A comparative experiment on the psychological effects of 3D  

Science Journals Connector (OSTI)

[Figure not available: see fulltext.] Keywords: 3D, Emotional Fatigue, Enjoyment, Experiment, Limited Capacity

Qihao Ji; Jessica Tanca; Sophie Janicke

2013-12-01T23:59:59.000Z

126

3D reconstruction of tensors and vectors  

SciTech Connect

Here we have developed formulations for the reconstruction of 3D tensor fields from planar (Radon) and line-integral (X-ray) projections of 3D vector and tensor fields. Much of the motivation for this work is the potential application of MRI to perform diffusion tensor tomography. The goal is to develop a theory for the reconstruction of both Radon planar and X-ray or line-integral projections because of the flexibility of MRI to obtain both of these type of projections in 3D. The development presented here for the linear tensor tomography problem provides insight into the structure of the nonlinear MRI diffusion tensor inverse problem. A particular application of tensor imaging in MRI is the potential application of cardiac diffusion tensor tomography for determining in vivo cardiac fiber structure. One difficulty in the cardiac application is the motion of the heart. This presents a need for developing future theory for tensor tomography in a motion field. This means developing a better understanding of the MRI signal for diffusion processes in a deforming media. The techniques developed may allow the application of MRI tensor tomography for the study of structure of fiber tracts in the brain, atherosclerotic plaque, and spine in addition to fiber structure in the heart. However, the relations presented are also applicable to other fields in medical imaging such as diffraction tomography using ultrasound. The mathematics presented can also be extended to exponential Radon transform of tensor fields and to other geometric acquisitions such as cone beam tomography of tensor fields.

Defrise, Michel; Gullberg, Grant T.

2005-02-17T23:59:59.000Z

127

Speed-line for 3D animation  

E-Print Network (OSTI)

Committee Members, Carol LaFayette John Keyser Head of Department, Mardelle Shepley December 2005 Major Subject: Visualization Sciences iii ABSTRACT Speed-Line for 3D Animation. (December 2005) Won Chan Song, B.F.A., Ringling School of Art and Design Chair... to thank my committee members, Prof. Carol LaFayette and Dr. John Keyser for their advice and feedback. My gratitude also goes to Hobart Chan for letting me borrow his car model, which saved me a huge amount of time when I was making an animation as a...

Song, Won Chan

2007-04-25T23:59:59.000Z

128

Learning Robot Grasping from 3-D Images with Markov Random Fields Abdeslam Boularias, Oliver Kroemer, Jan Peters  

E-Print Network (OSTI)

Learning Robot Grasping from 3-D Images with Markov Random Fields Abdeslam Boularias, Oliver Kroemer, Jan Peters Abstract-- Learning to grasp novel objects is an essential skill for robots operating is successfully tested in simulation, and on a real robot using 3-D scans of various types of objects

129

APPLICATION OF 2D AND 3D MODELS FOR TEACHING OF NATURAL SCIENCES  

E-Print Network (OSTI)

by three systems: the use of a 3D scanner, 3D photography and digital video camera, plus 3D SketchUp and 3D

Outerelo. Raimundo

130

Rheology of nearly ideal 3d foams  

E-Print Network (OSTI)

We probe the complex rheology of nearly ideal 3d foam by flowing through a narrow column. The foams we investigate have large bubble size, to minimize the effects of coarsening, and are very dry. Foams of this type cannot be studied via conventional rheometry. The foam flows upward through a vertical rectangular column with a 4:1 cross-sectional aspect ratio, by bubbling gas through a soapy solution at the base of our apparatus. At the column's narrow surfaces are sticky boundaries, which create shear due to the zero velocity boundary condition. As expected, the flow profile between the adjacent slippery broad faces is flat, however the profile between the narrow, sticky faces exhibits a curved velocity profile that is dependent on gas flow rate. We are able to analyze a 2d velocity profile from a 3d bulk system. We employ particle image velocimetry to measure the strain rate, and compute the stress from the pressure drop along the channel, to investigate the local stress-strain relationships in a flowing foam. We find these dry foams to have a Hershel-Bulkley exponent of 0.21, which is significantly lower (more shear thinning) than other results shown in the literature for much wetter foams.

C. D. Jones; K. N. Nordstrom; D. J. Durian

2014-04-10T23:59:59.000Z

131

Solving the 3d Ising Model with the Conformal Bootstrap II. c-Minimization and Precise Critical Exponents  

E-Print Network (OSTI)

We use the conformal bootstrap to perform a precision study of the operator spectrum of the critical 3d Ising model. We conjecture that the 3d Ising spectrum minimizes the central charge c in the space of unitary solutions to crossing symmetry. Because extremal solutions to crossing symmetry are uniquely determined, we are able to precisely reconstruct the first several Z2-even operator dimensions and their OPE coefficients. We observe that a sharp transition in the operator spectrum occurs at the 3d Ising dimension Delta_sigma=0.518154(15), and find strong numerical evidence that operators decouple from the spectrum as one approaches the 3d Ising point. We compare this behavior to the analogous situation in 2d, where the disappearance of operators can be understood in terms of degenerate Virasoro representations.

El-Showk, Sheer; Poland, David; Rychkov, Slava; Simmons-Duffin, David; Vichi, Alessandro

2014-01-01T23:59:59.000Z

132

Photo of the Week: Improving Power Plant Technology... in 3-D | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Improving Power Plant Technology... in 3-D Improving Power Plant Technology... in 3-D Photo of the Week: Improving Power Plant Technology... in 3-D June 6, 2013 - 12:58pm Addthis This week, Secretary Ernest Moniz experienced the 3-D visualizations at the Consortium for the Advanced Simulation of Light Water Reactors (CASL), one of the Department's Energy Innovation Hubs. The facility, located at Oak Ridge National Laboratory, develops computer models that simulate nuclear power plant operations. The researchers at CASL are developing technology that could accelerate upgrades at existing nuclear plants while improving the plants' reliability and safety. Check out more photos from Secretary Moniz's visit to CASL. | Photo courtesy of Oak Ridge National Laboratory.

133

Bridging 3D seismic onshore: Lodgepole play highlights promise and challenges  

SciTech Connect

Recent major discoveries by Conoco Inc. and Duncan Oil in the Lower Mississippian Lodgepole formation of the Williston basin show that finding major oil reserves is still possible in the US and that 3D seismic methods have the capability to locate them. The implications are profound for independent oil and gas producers, who traditionally concentrate their operations in the mature US. Like major companies, independents are profiting form use of 3D seismic methods. The Williston basin successes show how independents might use 3D seismic methods to identify opportunities in a region once considered to be drilled up. Both the increasing use of these technologies by independents as well as the experiences major companies have had with them are well-documented. The paper discusses the Lodgepole discoveries, rejuvenation of the US oil and gas industry, stratigraphic information available by 3D seismic means, economic impact, and implications of 30 seismic work in the US.

O`Connor, R.B. Jr. [Wavetech Geophysical Inc., Denver, CO (United States)

1995-11-20T23:59:59.000Z

134

Needle segmentation using 3D Hough transform in 3D TRUS guided prostate transperineal therapy  

SciTech Connect

Purpose: Prostate adenocarcinoma is the most common noncutaneous malignancy in American men with over 200 000 new cases diagnosed each year. Prostate interventional therapy, such as cryotherapy and brachytherapy, is an effective treatment for prostate cancer. Its success relies on the correct needle implant position. This paper proposes a robust and efficient needle segmentation method, which acts as an aid to localize the needle in three-dimensional (3D) transrectal ultrasound (TRUS) guided prostate therapy. Methods: The procedure of locating the needle in a 3D TRUS image is a three-step process. First, the original 3D ultrasound image containing a needle is cropped; the cropped image is then converted to a binary format based on its histogram. Second, a 3D Hough transform based needle segmentation method is applied to the 3D binary image in order to locate the needle axis. The position of the needle endpoint is finally determined by an optimal threshold based analysis of the intensity probability distribution. The overall efficiency is improved through implementing a coarse-fine searching strategy. The proposed method was validated in tissue-mimicking agar phantoms, chicken breast phantoms, and 3D TRUS patient images from prostate brachytherapy and cryotherapy procedures by comparison to the manual segmentation. The robustness of the proposed approach was tested by means of varying parameters such as needle insertion angle, needle insertion length, binarization threshold level, and cropping size. Results: The validation results indicate that the proposed Hough transform based method is accurate and robust, with an achieved endpoint localization accuracy of 0.5 mm for agar phantom images, 0.7 mm for chicken breast phantom images, and 1 mm for in vivo patient cryotherapy and brachytherapy images. The mean execution time of needle segmentation algorithm was 2 s for a 3D TRUS image with size of 264 Multiplication-Sign 376 Multiplication-Sign 630 voxels. Conclusions: The proposed needle segmentation algorithm is accurate, robust, and suitable for 3D TRUS guided prostate transperineal therapy.

Qiu Wu [Department of Biomedical Engineering, School of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, Hubei 430074 (China); Imaging Research Laboratories, Robarts Research Institute, Western University, London, Ontario N6A 5K8 (Canada); Yuchi Ming; Ding Mingyue [Department of Biomedical Engineering, School of Life Science and Technology, Huazhong University of Science and Technology, Wuhan, Hubei 430074 (China); Tessier, David; Fenster, Aaron [Imaging Research Laboratories, Robarts Research Institute, University of Western Ontario, London, Ontario N6A 5K8 (Canada)

2013-04-15T23:59:59.000Z

135

AUTOMATED, HIGHLY ACCURATE VERIFICATION OF RELAP5-3D  

SciTech Connect

Computer programs that analyze light water reactor safety solve complex systems of governing, closure and special process equations to model the underlying physics. In addition, these programs incorporate many other features and are quite large. RELAP5-3D[1] has over 300,000 lines of coding for physics, input, output, data management, user-interaction, and post-processing. For software quality assurance, the code must be verified and validated before being released to users. Verification ensures that a program is built right by checking that it meets its design specifications. Recently, there has been an increased importance on the development of automated verification processes that compare coding against its documented algorithms and equations and compares its calculations against analytical solutions and the method of manufactured solutions[2]. For the first time, the ability exists to ensure that the data transfer operations associated with timestep advancement/repeating and writing/reading a solution to a file have no unintended consequences. To ensure that the code performs as intended over its extensive list of applications, an automated and highly accurate verification method has been modified and applied to RELAP5-3D. Furthermore, mathematical analysis of the adequacy of the checks used in the comparisons is provided.

George L Mesina; David Aumiller; Francis Buschman

2014-07-01T23:59:59.000Z

136

ASIC for High Rate 3D Position Sensitive Detectors  

SciTech Connect

We report on the development of an application specific integrated circuit (ASIC) for 3D position sensitive detectors (3D PSD). The ASIC is designed to operate with pixelated wide bandgap sensors like Cadmium-Zinc-Telluride (CZT), Mercuric Iodide (Hgl2) and Thallium Bromide (TIBr). It measures the amplitudes and timings associated with an ionizing event on 128 anodes, the anode grid, and the cathode. Each channel provides low-noise charge amplification, high-order shaping with peaking time adjustable from 250 ns to 12 {micro}s, gain adjustable to 20 mV/fC or 120 mV/fC (for a dynamic range of 3.2 MeV and 530 keV in CZT), amplitude discrimination with 5-bit trimming, and positive and negative peak and timing detections. The readout can be full or sparse, based on a flag and single- or multi-cycle token passing. All channels, triggered channels only, or triggered with neighbors can be read out thus increasing the rate capability of the system to more than 10 kcps. The ASIC dissipates 330 mW which corresponds to about 2.5 mW per channel.

Vernon, E.; De Geronimo, G.; Ackley, K.; Fried, J.; He, Z.; Herman, C.; Zhang, F.

2010-06-16T23:59:59.000Z

137

Toward a compact underwater structured light 3-D imaging system  

E-Print Network (OSTI)

A compact underwater 3-D imaging system based on the principles of structured light was created for classroom demonstration and laboratory research purposes. The 3-D scanner design was based on research by the Hackengineer ...

Dawson, Geoffrey E

2013-01-01T23:59:59.000Z

138

Contributions to the 3D city modeling : 3D polyhedral building model reconstruction from aerial images and 3D facade modeling from terrestrial 3D point cloud and images.  

E-Print Network (OSTI)

??The aim of this work is to develop research on 3D building modeling. In particular, the research in aerial-based 3D building reconstruction is a topic (more)

Hammoudi, Karim

2011-01-01T23:59:59.000Z

139

Stereoscopic Presentations Taking the Difficulty out of 3D  

E-Print Network (OSTI)

1 Stereoscopic Presentations 颅 Taking the Difficulty out of 3D Andrew Woods, Centre for Marine of the two projectors. The audience then wear appropriately polarised 3D video projector (CRT/LCD/DMD) video

140

Computational 3D and reflectivity imaging with high photon efficiency  

E-Print Network (OSTI)

Imaging the 3D structure and reflectivity of a scene can be done using photon-counting detectors. Traditional imagers of this type typically require hundreds of detected photons per pixel for accurate 3D and reflectivity ...

Shin, Dongeek

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

3-D Earth model more accurately pinpoints explosions  

NLE Websites -- All DOE Office Websites (Extended Search)

3-D Earth model more accurately pinpoints explosions 3-D Earth model more accurately pinpoints explosions The purpose of this model is to assist the U.S. Air Force and the...

142

Ames Laboratory 3D printing technology research taking shape...  

NLE Websites -- All DOE Office Websites (Extended Search)

3D printing technology research taking shape Insider Scientists at the U.S. Department of Energy's Ames Laboratory see amazing potential in 3D printing and additive manufacturing,...

143

3D printing and simulation of naturally randomized cellular automata  

Science Journals Connector (OSTI)

3D printing technology usually aims at reproducing objects deterministically ... tools; however, the author has discovered that 3D printing can also generate self-organizing patterns similar ... proposed method w...

Yasusi Kanada

2014-11-01T23:59:59.000Z

144

3D Printing Comes of Age | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3D Printing Comes of Age 3D Printing Comes of Age September 19, 2014 - 5:25pm Addthis The highlight of this year's International Manufacturing Technology Show (IMTS), held earlier...

145

Catalyst Cartography: 3D Super-Resolution Mapping of Catalytic...  

NLE Websites -- All DOE Office Websites (Extended Search)

Catalyst Cartography: 3D Super-Resolution Mapping of Catalytic Activity Thanks to a groundbreaking new method, scientists have created the first 3D super-resolution maps of...

146

FMI Borehole Geology, Geomechanics and 3D Reservoir Modeling...  

Open Energy Info (EERE)

Geomechanics and 3D Reservoir Modeling Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: FMI Borehole Geology, Geomechanics and 3D Reservoir Modeling...

147

Characterizing tensile loading responses of 3D printed samples  

E-Print Network (OSTI)

An experimental study was performed to characterize the loading response of samples manufactured through 3D printing. Tensile testing was performed on a number of 3D printed samples created through Fused Filament Fabrication ...

Haid, Christopher M

2014-01-01T23:59:59.000Z

148

Ames Lab 101: Real-Time 3D Imaging  

ScienceCinema (OSTI)

Ames Laboratory scientist Song Zhang explains his real-time 3-D imaging technology. The technique can be used to create high-resolution, real-time, precise, 3-D images for use in healthcare, security, and entertainment applications.

Zhang, Song

2012-08-29T23:59:59.000Z

149

3-D GRMHD Simulations of Generating Jets  

E-Print Network (OSTI)

We have performed a first fully 3-D GRMHD simulation with Schwarzschild black hole with a free falling corona. The initial simulation results show that a jet is created as in the previous simulations using the axisymmetric geometry with the mirror symmetry at the equator. However, the time to generate the jet is longer than in the 2-D axisymmetric simulations. We expect that due to the additional freedom in the azimuthal dimension without axisymmetry with respect to the z axis and reflection symmetry with respect to the equatorial plane, the dynamics of jet formation can be modified. Further simulations are required for the study of instabilities along the azimuthal direction such as accretion-eject instability

Nishikawa, K I; Shibata, K; Kudoh, T; Sol, H

2002-01-01T23:59:59.000Z

150

3-D GRMHD Simulations of Generating Jets  

E-Print Network (OSTI)

We have performed a first fully 3-D GRMHD simulation with Schwarzschild black hole with a free falling corona. The initial simulation results show that a jet is created as in the previous simulations using the axisymmetric geometry with the mirror symmetry at the equator. However, the time to generate the jet is longer than in the 2-D axisymmetric simulations. We expect that due to the additional freedom in the azimuthal dimension without axisymmetry with respect to the z axis and reflection symmetry with respect to the equatorial plane, the dynamics of jet formation can be modified. Further simulations are required for the study of instabilities along the azimuthal direction such as accretion-eject instability

K. -I. Nishikawa; S. Koide; K. Shibata; T. Kudoh; H. Sol

2002-08-05T23:59:59.000Z

151

A 3D scanning system for biomedical purposes  

Science Journals Connector (OSTI)

The use of three-dimensional (3D) scanning systems for acquiring the external shape features of biological objects has recently been gaining popularity in the biomedical field. A simple, low cost, 3D scanning system is presented, which employs ... Keywords: 3D geometric modelling, 3D scanning, EFDs, biological objects, biomedical scanners, camera calibration, data acquisition, direct linear transformation, elliptical Fourier descriptors, laser light-sectioning, medical imaging, shape features

B. D. Bradley; A. D. C. Chan; M. J. D. Hayes

2009-06-01T23:59:59.000Z

152

Localization and 3D Reconstruction of Urban Scenes Using GPS  

E-Print Network (OSTI)

D models in Google earth 路 Manual modeling and texturing (sketch-up) 路 3D model covers limited area

Haro, Antonio

153

3D Rendering and Ray Casting Michael Kazhdan  

E-Print Network (OSTI)

3D Rendering and Ray Casting Michael Kazhdan (600.357 / 600.457) HB Ch. 13.7, 14.6 FvDFH 15.5, 15.10 #12;Rendering 路 Generate an image from geometric primitives Rendering Geometric Primitives (3D) Raster Image (2D) #12;3D Rendering Example What issues must be addressed by a 3D rendering system? #12;Overview

Kazhdan, Michael

154

3-D Finite Element Analyses of the Egan Cavern Field  

SciTech Connect

Three-dimensional finite element analyses were performed for the two gas-filled storage caverns at the Egan field, Jennings dome, Louisiana. The effects of cavern enlargement on surface subsidence, storage loss, and cavern stability were investigated. The finite element model simulated the leaching of caverns to 6 and 8 billion cubic feet (BCF) and examined their performance at various operating conditions. Operating pressures varied from 0.15 psi/ft to 0.9 psi/ft at the bottom of the lowest cemented casing. The analysis also examined the stability of the web or pillar of salt between the caverns under differential pressure loadings. The 50-year simulations were performed using JAC3D, a three dimensional finite element analysis code for nonlinear quasistatic solids. A damage criterion based on onset of dilatancy was used to evaluate cavern instability. Dilation results from the development of microfractures in salt and, hence, potential increases in permeability onset occurs well before large scale failure. The analyses predicted stable caverns throughout the 50-year period for the range of pressures investigated. Some localized salt damage was predicted near the bottom walls of the caverns if the caverns are operated at minimum pressure for long periods of time. Volumetric cavern closures over time due to creep were moderate to excessive depending on the salt creep properties and operating pressures. However, subsidence above the cavern field was small and should pose no problem, to surface facilities.

Klamerus, E.W.; Ehgartner, B.L.

1999-02-01T23:59:59.000Z

155

Using interactive 3-D visualization for public consultation  

Science Journals Connector (OSTI)

......www.presagis.com/products/content_creation/creator ) was used to create the model and Autodesk 3D Studio Max ( http://usa.autodesk.com/ ) was used to add further details to the model. The 3D games graphics engine Ogre 3D......

Paul van Schaik

2010-11-01T23:59:59.000Z

156

3D Printing Prof. Hank Dietz & Paul Eberhart  

E-Print Network (OSTI)

3D Printing Prof. Hank Dietz & Paul Eberhart September 28, 2013 University of Kentucky Electrical/Craft: paper moves in Y, knife in X EDM/Laser: X/Y bed, vaporizes material #12;Subtractive 3D CNC: Computer "The whole is greater than the sum of its parts." 颅 Aristotle #12;Additive 3D Building Material

Dietz, Henry G. "Hank"

157

3-D Earth model more accurately pinpoints explosions  

E-Print Network (OSTI)

- 1 - 3-D Earth model more accurately pinpoints explosions October 25, 2013 During the Cold War, U) have partnered to develop a 3-D model of the Earth's mantle and crust called SALSA3D (Sandia-Los Alamos of explosions. Significance of the research After an explosion, the energy travels through the Earth as waves

158

Issues in the Development of 3D Icons Rob Erbacher  

E-Print Network (OSTI)

Issues in the Development of 3D Icons Rob Erbacher Georges Grinstein Institute for Visualization dimensions through the use of 3D icons. We briefly discuss geometric and color icons and the 2D textures they generate. We then exhibit a 3D icon, explain its parameters and features, and demonstrate how this icon

Erbacher, Robert F.

159

3D PRINTING FOR INTELLIGENT METALLIC STRUCTURES M. Strantza1  

E-Print Network (OSTI)

3D PRINTING FOR INTELLIGENT METALLIC STRUCTURES M. Strantza1 , D. De Baere2 , M. Rombouts3 , SSHM system is produced by 3D printing or additive manufacturing. Additive Manufacturing (AM) is a "process to enable its implementation. This work demonstrates the feasibility study of eSHM systems produced by 3D

Boyer, Edmond

160

3D RECONSTRUCTION FROM A SINGLE IMAGE Diego Rother  

E-Print Network (OSTI)

3D RECONSTRUCTION FROM A SINGLE IMAGE By Diego Rother and Guillermo Sapiro IMA Preprint Series. 1 3D Reconstruction from a Single Image Diego Rother and Guillermo Sapiro Abstract-- A probabilistic framework for 3D object reconstruction from a single image is introduced in this work. First

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Fast 3D Scanning for Biometric Identification and Verification  

E-Print Network (OSTI)

Fast 3D Scanning for Biometric Identification and Verification June 2011 Authors Anselmo., & Chen, A. (2011). Fast 3D Scanning for Biometric Identification and Verification. (Prepared by RTI..................................................10 Summary and Findings for Integration of Imperceptible Structured Lighting and SIS's 3D Snapshot

McShea, Daniel W.

162

3D imaging and ranging by time-correlated single  

E-Print Network (OSTI)

3D imaging and ranging by time-correlated single photon counting by A. M. Wallace, 6. S. Buller and A. C. Walker 3D imaging is an important tool for metrology and reverse engineering of components and architecturalsurveying. In this article, we review briefly the principal methods in current use for 3D imaging

Buller, Gerald S.

163

3D Scanning for Biometric Identification and Verification  

E-Print Network (OSTI)

June 2010 3D Scanning for Biometric Identification and Verification Project Leads Anselmo Lastra visibility, cannot be controlled. A relatively new biometric, 3D facial recognition, holds great promise performance using 3D shape and texture matched that of the much more mature technologies of high

McShea, Daniel W.

164

3D discrete rotations using hinge angles Yohan Thibaulta,  

E-Print Network (OSTI)

3D discrete rotations using hinge angles Yohan Thibaulta, , Akihiro Sugimotob , Yukiko Kenmochia a of Informatics, Japan Abstract In this paper, we study 3D rotations on grid points computed by using only integers. For that purpose, we investigate the intersection between the 3D half- grid and the rotation

Paris-Sud XI, Universit茅 de

165

3D Engineered Models for Stringless Paving Workshop  

E-Print Network (OSTI)

3D Engineered Models for Stringless Paving Workshop As the highway industry looks for greater productivity through electronic tools and methods, 3D modeling is fast becoming a standard for project delivery quality, cost, and time benefits from using 3D modeling. For construction, this includes more accurate

166

3D Laser Imaging at Highway Speed Kelvin CP Wang  

E-Print Network (OSTI)

3D Laser Imaging at Highway Speed Kelvin CP Wang And the Team Formerly at the University Concrete Consortium Meeting Oklahoma City Sheraton Hotel #12;3D Laser Imaging for Pavements Mature Potential to Cover Most if Not All Data Collection on Pavement Surface How to Obtain True 1mm 3D Visual

167

The 3D jigsaw puzzle: mapping large indoor spaces  

E-Print Network (OSTI)

The 3D jigsaw puzzle: mapping large indoor spaces Ricardo Martin-Brualla1 , Yanling He1 , Bryan C of famous tourist sites. While current 3D reconstruction algorithms often produce a set of disconnected components (3D pieces) for indoor scenes due to scene coverage or matching failures, we make use

Anderson, Richard

168

Analyzing 3D Images of the Brain NICHOLAS AYACHE  

E-Print Network (OSTI)

Analyzing 3D Images of the Brain NICHOLAS AYACHE OVERVIEW During the past 5 years, there has been research. Along these lines, and focusing on 3D images of the brain obtained with CT, MRI, SPECT, and PET for an objective analysis of 3D images of the brain. Such methods include segmentation, shape analysis, rigid

Paris-Sud XI, Universit茅 de

169

3 D seismic interpretation, reservoir characteristics and petroleum prospects for South Marsh Island OCS Blocks, Gulf of Mexico  

E-Print Network (OSTI)

show great stratigraphic diversity within short distances, making the ability to accurately determine whether sand lenses have been adequately produced or bypassed essential for production opportunities for operators. New 3 D seismic processing...

Duan, Ling

2012-06-07T23:59:59.000Z

170

A Simple Proposal for Radial 3D Needlets  

E-Print Network (OSTI)

We present here a simple construction of a wavelet system for the three-dimensional ball, which we label \\emph{Radial 3D Needlets}. The construction envisages a data collection environment where an observer located at the centre of the ball is surrounded by concentric spheres with the same pixelization at different radial distances, for any given resolution. The system is then obtained by weighting the projector operator built on the corresponding set of eigenfunctions, and performing a discretization step which turns out to be computationally very convenient. The resulting wavelets can be shown to have very good localization properties in the real and harmonic domain; their implementation is computationally very convenient, and they allow for exact reconstruction as they form a tight frame systems. Our theoretical results are supported by an extensive numerical analysis.

Durastanti, Claudio; Hansen, Frode K; Marinucci, Domenico; Pesenson, Isaac Z

2014-01-01T23:59:59.000Z

171

6, 1270112728, 2006 3-D polarised RT and  

E-Print Network (OSTI)

. of Atmosphere and oceanic Sciences, University of Colorado, USA 3 Department of Space Science, Lulea Technical

Boyer, Edmond

172

Stack and cell modelling with SOFC3D: a computer program for the 3D simulations of  

E-Print Network (OSTI)

Stack and cell modelling with SOFC3D: a computer program for the 3D simulations of solid oxide fuel, France 1 Introduction SOFC3D is a computer program, which simulates the behaviour of a solid oxide fuel model A detailed cell model was obtained [9] by writing the conservation laws in the solid parts

Herbin, Rapha猫le

173

Ocean Acidification  

Science Journals Connector (OSTI)

Ocean Acidification ... The first assignment I give my students in Environmental Modeling class is to calculate the mass of the oceans versus the mass of the atmosphere and the 搇iving soil. ... As a young chemical engineer in the early 1970s, I remember discussing the horrors of sulfur and particulate pollution from steel mills, smelters, and power plants. ...

Jerald L. Schnoor

2013-11-05T23:59:59.000Z

174

ALARA pre-job studies using the VISIPLAN 3D ALARA planning tool  

Science Journals Connector (OSTI)

......an in situ test at a nuclear power plant(3). At the moment...radiation from LWR nuclear power plants (1979). 3. Vermeersch...use of 3D dose assessment and human motion simulation in ALARA DD problems...operation and repair of nuclear power plant (VRIMOR). FISA 2001......

Fernand Vermeersch

2005-12-20T23:59:59.000Z

175

Using Immersive 3D Terrain Models For Fusion Of UAV Surveillance Imagery  

E-Print Network (OSTI)

Using Immersive 3D Terrain Models For Fusion Of UAV Surveillance Imagery Sean Owens , Katia Sycara and Paul Scerri Carnegie Mellon University, Pittsburgh, PA, 15213, USA Teams of small and micro UAVs a single operator to utilize data from several UAVs and interact with the data in a more natural and less

Scerri, Paul

176

3D simulations of multipacting in the 56 MHz SRF cavity  

SciTech Connect

The 56 MHz SRF Quarter-Wave Resonator (QWR) is designed for RHIC as a storage cavity to improve the collider performance. 2D multipacting simulation has been done for the cavity alone. Ripples were added to the outer body of the cavity for multipacting suppression based on the simulation findings. During operation, there will be four higher order mode (HOM) couplers. All of these components will be exposed to high RF fields. In this paper we compare 2D and 3D codes simulation results for multipacting in the cavity. We also report 3D simulation results for multipacting simulation at the couplers.

Wu Q.; Belomestnykh, S.; Ge, L.; Ko, K.; Li, Z.; Ng, C.; Xiao, L.

2012-05-20T23:59:59.000Z

177

3D turtle geometry: artwork, theory, program equivalence and symmetry  

Science Journals Connector (OSTI)

We define a 3D variant of turtle graphics and present the theoretical foundations of 3D turtle geometry. This theory enables one to reason about open and closed 3D polygonal paths by means of algebraic calculations. In particular, we introduce several equivalence relations on turtle programs and theorems that define corresponding standard forms. Also we express the relationship between the symmetries of a 3D polygonal path and the symmetries of a generating turtle program in a suitable standard form. Finally, we discuss software tool support for 3D turtle geometry. Along the way, we present some artworks designed through 3D turtle graphics. These artworks have never been described in the literature before.

Tom Verhoeff

2010-01-01T23:59:59.000Z

178

3-D Model for Deactivation & Decommissioning | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3-D Model for Deactivation & Decommissioning 3-D Model for Deactivation & Decommissioning 3-D Model for Deactivation & Decommissioning The design and production of 3-D scale models that replicate the highly contaminated structures within the nuclear facility would provide a significant improvement in visualization of the work space, which would give managers and supervisors a more powerful tool for planning and communicating safety issues and work sequences to personnel executing the physical D&D tasks. 3-D Model for Deactivation & Decommissioning More Documents & Publications D&D Toolbox Robotic Deployment of High Resolution Laser Imaging for Characterization D&D and Risk Assessment Tools 3-D Model for Deactivation & Decommissioning Deactivation & Decommissioning Knowledge Management Information Tool (D&D

179

Ocean Energy  

Science Journals Connector (OSTI)

Some of these technologies are taking off from very low power capacities, although with an intense activity....4, 5] including La Rance tidal power station calculate a capacity of ocean energy facilities worldwid...

Ricardo Guerrero-Lemus; Jos Manuel Mart韓ez-Duart

2013-01-01T23:59:59.000Z

180

Proceedings OceanSAR 2006 Third Workshop on Coastal and Marine Applications of SAR, St. John's, NL, Canada, October 2006 Algorithm development for operational satellite SAR  

E-Print Network (OSTI)

1 Proceedings OceanSAR 2006 颅 Third Workshop on Coastal and Marine Applications of SAR, St. John, U.S.A. Tel: 734-741-2265, Fax: 734-741-2055, E-mail: george.leshkevich@noaa.gov 2 Jet Propulsion types using the Jet Propulsion Laboratory (JPL) C-band scatterometer, together with surface-based ice

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

NASA to send 3D printer into space  

Science Journals Connector (OSTI)

... time that a 3D printer flies in space. The agency has already embraced ground-based 3D printing as a fast, cheap way to make spacecraft parts, including rocket engine components that ... to make spacecraft parts literally on the fly. Space experts say that the promise of 3D爌rinting is real, but a long way from the hype that surrounds it. 揟here ...

Alexandra Witze

2014-09-10T23:59:59.000Z

182

Climate Change Capacity Development (C3D+) | Open Energy Information  

Open Energy Info (EERE)

C3D+) C3D+) Jump to: navigation, search Logo: Climate Change Capacity Development (C3D+) Name Climate Change Capacity Development (C3D+) Agency/Company /Organization United Nations Institute for Training and Research (UNITAR) Partner Caribbean Climate Change Community Centre (CCCCC), Climate System Analysis Group at UCT Cape Town (CSAG), Environment and Development Action in the Third World (ENDA-TM), University of Cape Town-Energy Research Centre, South Pacific Regional Environment Programme (SPREP), Munasinghe Institute (MIND), Center for International Forestry Research, International Institute for Sustainable Development (IISD), Stockholm Environment Institute Sector Climate Topics Low emission development planning Resource Type Training materials

183

Coordination Polymers A Unique 3D Alternating Ferro-and  

E-Print Network (OSTI)

(3-ptz)] (3-ptz = 5-(3-pyridyl)tetrazolate),[7e] in which the metal centers are diamagnetic 3d10 cadmium

Gao, Song

184

Identificering af teknologi gennem narrativer; 3D print.  

E-Print Network (OSTI)

??Denne rapport arbejder med en gennemgang af den s錵aldte 3D printer teknologi. Denne vil s鎡tes i sammenh鎛g med et teknologifilosofisk 抐orm of life ? forst錯lse (more)

Petersen, Mikael

2011-01-01T23:59:59.000Z

185

3D Printing of nanostructured catalytic materials | The Ames...  

NLE Websites -- All DOE Office Websites (Extended Search)

3D Printing of nanostructured catalytic materials Over the last couple of decades, scientists have been able to develop a tremendous control over the synthesis and properties of...

186

From Digital to Physical: Computational Aspects of 3D Manufacturing.  

E-Print Network (OSTI)

??The desktop publishing revolution of the 1980s is currently repeating itself in 3D, referred to as desktop manufacturing. Online services such as Shapeways have become (more)

Baecher, Moritz Niklaus

2013-01-01T23:59:59.000Z

187

Advanced 3D Geophysical Imaging Technologies for Geothermal Resource Characterization  

Energy.gov (U.S. Department of Energy (DOE))

Advanced 3D Geophysical Imaging Technologies for Geothermal Resource Characterization presentation at the April 2013 peer review meeting held in Denver, Colorado.

188

Just Plain Cool, the 3D Printed Shelby Cobra  

Energy.gov (U.S. Department of Energy (DOE))

Indistinguishable from conventional production vehicles on display, the 3D printed Shelby Cobra celebrated its 50th anniversary at the Detroit Auto Show in early January.

189

Ames Laboratory 3D printing technology research taking shape...  

NLE Websites -- All DOE Office Websites (Extended Search)

3D printing technology research taking shape Contacts: For Release: Sept. 23, 2014 Igor Slowing, Chemical and Biological Sciences, 515-294-1959 Laura Millsaps, Public Affairs,...

190

Making 3D Printed Christmas Ornaments | GE Global Research  

NLE Websites -- All DOE Office Websites (Extended Search)

enjoys baking cookies and snowball fights. Recent Posts by This Contributor Using 3D Printing to Redesign Santa's Sleigh A Sneak Peek Into Santa's Smarter Sleigh Subscribe to...

191

Homogeneous and Interfacial Catalysis in 3D Controlled Environment...  

NLE Websites -- All DOE Office Websites (Extended Search)

Homogeneous and Interfacial Catalysis in 3D Controlled Environment FWPProject Description: Project Leader(s): Marek Pruski Principal Investigators: Andreja Bakac, Marek Pruski,...

192

RELAP5-3D V. 4.X.X  

Energy Science and Technology Software Center (OSTI)

000191MLTPL01 NON-NRC FUNDED RELAP5-3D VERSION 4.x.x SOFTWARE REACTOR EXCURSION AND LEAK ANALYSIS PACKAGE - THREE DIMENSIONAL

193

Nano, photonic research gets boost from new 3-D visualization...  

NLE Websites -- All DOE Office Websites (Extended Search)

imaging (CSSI) data. An image as 2-D coherent surface scattering imaging (CSSI) data. Nano, photonic research gets boost from new 3-D visualization technology By Tona Kunz *...

194

3D calculation of Tucson-Melbourne 3NF effect in triton binding energy  

E-Print Network (OSTI)

As an application of the new realistic three-dimensional (3D) formalism reported recently for three-nucleon (3N) bound states, an attempt is made to study the effect of three-nucleon forces (3NFs) in triton binding energy in a non partial wave (PW) approach. The spin-isospin dependent 3N Faddeev integral equations with the inclusion of 3NFs, which are formulated as function of vector Jacobi momenta, specifically the magnitudes of the momenta and the angle between them, are solved with Bonn-B and Tucson-Melbourne NN and 3N forces in operator forms which can be incorporated in our 3D formalism. The comparison with numerical results in both, novel 3D and standard PW schemes, shows that non PW calculations avoid the very involved angular momentum algebra occurring for the permutations and transformations and it is more efficient and less cumbersome for considering the 3NF.

M. R. Hadizadeh; L. Tomio; S. Bayegan

2010-03-24T23:59:59.000Z

195

Shape-based retrieval and analysis of 3D models  

Science Journals Connector (OSTI)

Large repositories of 3D data are rapidly becoming available in several fields, including mechanical CAD, molecular biology, and computer graphics. As the number of 3D models grows, there is an increasing need for computer algorithms to help people find ...

Thomas Funkhouser; Michael Kazhdan

2004-08-01T23:59:59.000Z

196

WirePrint: 3D printed previews for fast prototyping  

Science Journals Connector (OSTI)

Even though considered a rapid prototyping tool, 3D printing is so slow that a reasonably sized object requires printing overnight. This slows designers down to a single iteration per day. In this paper, we propose to instead print low-fidelity wireframe ... Keywords: 3D printing, rapid prototyping

Stefanie Mueller, Sangha Im, Serafima Gurevich, Alexander Teibrich, Lisa Pfisterer, Fran鏾is Guimbreti鑢e, Patrick Baudisch

2014-10-01T23:59:59.000Z

197

Surface light fields for 3D photography Daniel N. Wood  

E-Print Network (OSTI)

Surface light fields for 3D photography Daniel N. Wood A dissertation submitted in partial This is to certify that I have examined this copy of a doctoral dissertation by Daniel N. Wood and have found for 3D photography by Daniel N. Wood Chair of Supervisory Committee: Associate Professor Brian L

Washington at Seattle, University of

198

Mastering AutoCAD Civil 3D 2011  

Science Journals Connector (OSTI)

The only comprehensive reference and tutorial for Civil 3D 2011 Civil 3D is Autodesks popular, robust civil engineering software, and this fully updated guide is the only one endorsed by Autodesk to help students prepare for certification exams. Packed ...

P. James E. Wedding; Scott McEachron

2010-08-01T23:59:59.000Z

199

Automatic 3D modeling of palatal plaster casts Marco Andreetto  

E-Print Network (OSTI)

Automatic 3D modeling of palatal plaster casts Marco Andreetto Dept. of Information Engineer-form surfaces of anatomi- cal interest. 1. Introduction Plaster models derived from palate's impressions. A data-base with the 3D models of the plaster casts, which could be called a "virtual gypsotheque", can

Abu-Mostafa, Yaser S.

200

Surround structured lighting: 3-D scanning with orthographic illumination  

Science Journals Connector (OSTI)

This paper presents a new system for rapidly acquiring complete 3-D surface models using a single orthographic structured light projector, a pair of planar mirrors, and one or more synchronized cameras. Using the mirrors, we project structured light ... Keywords: 3-D reconstruction, Full object scanning, Gray codes, Orthographic projection, Structured lighting

Douglas Lanman; Daniel Crispell; Gabriel Taubin

2009-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Chopper: Partitioning models into 3D-printable parts  

E-Print Network (OSTI)

3D printing technology is rapidly maturing and becoming ubiquitous. One of the remaining obstacles to wide-scale adoption is that the object to be printed must fit into the working volume of the 3D printer. We propose a ...

Luo, Linjie

202

3D Wavelet-Based Filter and Method  

DOE Patents (OSTI)

A 3D wavelet-based filter for visualizing and locating structural features of a user-specified linear size in 2D or 3D image data. The only input parameter is a characteristic linear size of the feature of interest, and the filter output contains only those regions that are correlated with the characteristic size, thus denoising the image.

Moss, William C. (San Mateo, CA); Haase, Sebastian (San Francisco, CA); Sedat, John W. (San Francisco, CA)

2008-08-12T23:59:59.000Z

203

3D THERMOGRAPHY FOR QUANTIFICATION OF HEAT GENERATION RESULTING FROM  

E-Print Network (OSTI)

been used for decades by biologists and clinicians to isolate main sites of body heat loss by biologists and clinicians to isolate main sites of body heat loss and to assist with diagnosis3D THERMOGRAPHY FOR QUANTIFICATION OF HEAT GENERATION RESULTING FROM INFLAMMATION THERMOGRAPHIE 3D

Nebel, Jean-Christophe

204

3D printing rises to the occasion | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Features Features 2014 2013 2012 2011 2010 News Home | ORNL | News | Features | 2013 SHARE 3D printing rises to the occasion ORNL group shows how it's done, one layer at a time A perforated metal box produced by an Arcam 3D printer. This detailed A perforated metal box produced by an Arcam 3D printer. This detailed "calibration" part illustrates some of the versatility of 3D printing. Photo: Jason Richards (hi-res image) Things have come a long way since the mid-1980s when 3D Systems cofounder Chuck Hull worked out the technology to print objects in three dimensions, one very thin layer at a time. Hull called his new technology "stereolithography." In it, a guided beam of ultraviolet light is focused on a vat of liquid polymer, solidifying areas where it hits. When one layer is complete, the

205

Energy Savings in 3-D | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy savings in 3-D Energy savings in 3-D ORNL researchers show production, energy advantages of additive manufacturing ORNL 3-D printer in use. ORNL 3-D printer in use. Researchers at the Department of Energy's Oak Ridge National Laboratory are working with aircraft makers to determine energy savings through the use of additive manufacturing, also known as 3-D printing. Sachin Nimbalkar and his ORNL colleagues are printing airplane parts to show additive manufacturing's potential as a technology that should be considered foundational to processes seeking more energy efficiency. Additive manufacturing builds products precisely, layer by layer, and is distinctly different from traditional subtractive manufacturing processes, which take raw material and cut it down into a desired shape and size.

206

11971197AUGUST 2007AMERICAN METEOROLOGICAL SOCIETY | The Global Ocean Data Assimilation  

E-Print Network (OSTI)

and in situ observations, for NWP, ocean forecasting, ecosystem applications, and climate research. BY C forecasting, military and defence operations, validating or forcing ocean and atmospheric models, ecosystem11971197AUGUST 2007AMERICAN METEOROLOGICAL SOCIETY | The Global Ocean Data Assimilation Experiment

Merchant, Chris

207

GPU-accelerated denoising of 3D magnetic resonance images  

SciTech Connect

The raw computational power of GPU accelerators enables fast denoising of 3D MR images using bilateral filtering, anisotropic diffusion, and non-local means. In practice, applying these filtering operations requires setting multiple parameters. This study was designed to provide better guidance to practitioners for choosing the most appropriate parameters by answering two questions: what parameters yield the best denoising results in practice? And what tuning is necessary to achieve optimal performance on a modern GPU? To answer the first question, we use two different metrics, mean squared error (MSE) and mean structural similarity (MSSIM), to compare denoising quality against a reference image. Surprisingly, the best improvement in structural similarity with the bilateral filter is achieved with a small stencil size that lies within the range of real-time execution on an NVIDIA Tesla M2050 GPU. Moreover, inappropriate choices for parameters, especially scaling parameters, can yield very poor denoising performance. To answer the second question, we perform an autotuning study to empirically determine optimal memory tiling on the GPU. The variation in these results suggests that such tuning is an essential step in achieving real-time performance. These results have important implications for the real-time application of denoising to MR images in clinical settings that require fast turn-around times.

Howison, Mark; Wes Bethel, E.

2014-05-29T23:59:59.000Z

208

A High-Throughput 3-D X-ray Microtomography System with Real-Time 3-D  

NLE Websites -- All DOE Office Websites (Extended Search)

Throughput 3-D X-ray Microtomography System with Real-Time 3-D Throughput 3-D X-ray Microtomography System with Real-Time 3-D Reconstruction A high-throughput x-ray microtomography system (XMS) that can acquire, reconstruct, and interactively display rendered 3-D images of a sample at micrometer-scale resolution within minutes has been developed at Advanced Photon Source (APS) beamline 2-BM, which is managed by the Synchrotron Radiation Instrumentation Collaborative Access Team (SRI-CAT). This system could bring better understanding of an array of scientific and technological problems, ranging from failure in microelectronic devices to structures in biological samples. A rendered image from a three-dimensional tomographic reconstruction of a cricket, obtained with the x-ray microtomography system. The image has been digitally cut at different planes to show the internal structures of the cricket's head.

209

Critical exponents of the 3d Ising and related models from Conformal Bootstrap  

E-Print Network (OSTI)

The constraints of conformal bootstrap are applied to investigate a set of conformal field theories in various dimensions. The prescriptions can be applied to both unitary and non unitary theories allowing for the study of the spectrum of low-lying primary operators of the theory. We evaluate the lowest scaling dimensions of the local operators associated with the Yang-Lee edge singularity for $2 \\le D \\le 6$. Likewise we obtain the scaling dimensions of six scalars and four spinning operators for the 3d critical Ising model. Our findings are in agreement with existing results to a per mill precision and estimate several new exponents.

Gliozzi, Ferdinando

2014-01-01T23:59:59.000Z

210

The oceanic crust in 3D: Paleomagnetic reconstruction in the Troodos ophiolite gabbro  

E-Print Network (OSTI)

Uranium-Lead Isotopic Ages of Plagiogranites from the Troodos Ophiolite, Cyprus, and Their Tectonic Significance, Geology

Granot, R; Abelson, Meir; Ron, Hagai; Agnon, Amotz

2006-01-01T23:59:59.000Z

211

Real time 3D and heterogeneous data fusion  

SciTech Connect

This project visualizes characterization data in a 3D setting, in real time. Real time in this sense means collecting the data and presenting it before it delays the user, and processing faster than the acquisition systems so no bottlenecks occur. The goals have been to build a volumetric viewer to display 3D data, demonstrate projecting other data, such as images, onto the 3D data, and display both the 3D and projected images as fast as the data became available. The authors have examined several ways to display 3D surface data. The most effective was generating polygonal surface meshes. They have created surface maps form a continuous stream of 3D range data, fused image data onto the geometry, and displayed the data with a standard 3D rendering package. In parallel with this, they have developed a method to project real-time images onto the surface created. A key component is mapping the data on the correct surfaces, which requires a-priori positional information along with accurate calibration of the camera and lens system.

Little, C.Q.; Small, D.E.

1998-03-01T23:59:59.000Z

212

3D Spectroscopy in the Virtual Observatory: Current Status  

E-Print Network (OSTI)

Three cornerstones for the 3D data support in the Virtual Observatory are: (1) data model to describe them, (2) data access services providing access to fully-reduced datasets, and (3) client applications which can deal with 3D data. Presently all these components became available in the VO. We demonstrate an application of the IVOA Characterisation data model to description of IFU and Fabry-Perot datasets. Two services providing SSA-like access to 3D-spectral data and Characterisation metadata have been implemented by us: ASPID-SR at SAO RAS for accessing IFU and Fabry-Perot data from the Russian 6-m telescope, and the Giraffe Archive at the VO Paris portal for the VLT FLAMES-Giraffe datasets. We have implemented VO Paris Euro3D Client, handling Euro3D FITS format, that interacts with CDS Aladin and ESA VOSpec using PLASTIC to display spatial and spectral cutouts of 3D datasets. Though the prototype we are presenting is yet rather simple, it demonstrates how 3D spectroscopic data can be fully integrated into the VO infrastructure.

Igor Chilingarian; Francois Bonnarel; Mireille Louys; Ivan Zolotukhin; Frederic Royer; Isabelle Jegouzo; Pierre Le Sidaner; Pierre Fernique; Thomas Boch

2007-11-02T23:59:59.000Z

213

PSU ARL Additive Manufacturing Capstone Project For the first time the PSU ARL, the IE480W CIMP-3D Group at Penn State showed that  

E-Print Network (OSTI)

PSU ARL Additive Manufacturing Capstone Project For the first time the PSU ARL, the IE480W CIMP-3D Processing by Direct Digital Deposition (CIMP-3D), is a program utilizing Additive Manufacturing (AM was to develop an understanding of how key operating parameters such as layer thickness, manufacturing

Demirel, Melik C.

214

Grafta: A 3D environment for biomolecular networks  

Science Journals Connector (OSTI)

The importance of a comprehensive environment for the depiction of biomolecular networks in the domain of system biology has been emphasised after the completion of genomic, proteomic and metabolomic initatives. Grafta is a software application developed for the three dimensional illustration of biomolecular interactions such as protein interaction networks. Grafta allows its user to move in a 3D environment through a complex assembly of biomolecules represented by 3D objects such as spheres. Their interactions are displayed by an array of 3D tubes. One novelty in Grafta is its anthropomorphic navigation of the viewpoint with respect to the displayed biomolecular network.

Peyman Najmabadi; Hans He Lee; Tony Aung; Aung Thuya; Julio Ng; James J. La Clair; Michael D. Burkart

2009-01-01T23:59:59.000Z

215

Controlling Tokamak Geometry with 3D Magnetic Perturbations  

E-Print Network (OSTI)

It is shown that small externally applied magnetic perturbations can significantly alter important geometric properties of magnetic flux surfaces in tokamaks. Through 3D shaping, experimentally relevant perturbation levels are large enough to influence turbulent transport and MHD stability in the pedestal region. It is shown that the dominant pitch-resonant flux surface deformations are primarily induced by non-resonant 3D fields, particularly in the presence of significant axisymmetric shaping. The spectral content of the applied 3D field can be used to control these effects.

Bird, Thomas M

2014-01-01T23:59:59.000Z

216

Shallow quantum well excitons: 2D or 3D?  

Science Journals Connector (OSTI)

A new regime is obtained in semiconductor heterostructures with constituents of nearly identical band gaps. Previously, it has been shown that even extremely shallow quantum wells (SHQWs) exhibit excitonic and electroabsorption properties typical of a 2D system, but 3D transport features. We show that, surprisingly, even when carriers are two-dimensionally confined in SHQWs, the hole spin relaxation is extremely fast (?400 fsec) as in the bulk (3D) limit and that a 2D-3D transition in the hole spin dynamics in GaAs/AlxGa1-xAs SHQWs takes place at x?5%.

I. Brener; W. H. Knox; K. W. Goossen; J. E. Cunningham

1993-01-18T23:59:59.000Z

217

Approaches for Additive Manufacturing of 3D Electronic Applications  

Science Journals Connector (OSTI)

Abstract Additive manufacturing processes typically used for mechanical parts can be combined with enhanced technologies for electronics production to enable a highly flexible manufacturing of personalized 3D electronic devices. To illustrate different approaches for implementing electrical and electronic functionality, conductive paths and electronic components were embedded in a powder bed printed substrate using an enhanced 3D printer. In addition, a modified Aerosol Jet printing process and assembly technologies adapted from the technology of Molded Interconnect Devices were applied to print circuit patterns and to electrically interconnect components on the surface of the 3D substrates.

J. Hoerber; J. Glasschroeder; M. Pfeffer; J. Schilp; M. Zaeh; J. Franke

2014-01-01T23:59:59.000Z

218

Fluorescence Detector for Capillary Separations Fabricated by 3D Printing  

Science Journals Connector (OSTI)

Fluorescence Detector for Capillary Separations Fabricated by 3D Printing ... Additive manufacturing, also known as 3D printing, rapid prototyping, or solid-freeform technology, has become an efficient method for rapid prototyping and fabrication applications ranging from small home projects to architecture and industrial machining. ... Compared to the more expensive alternatives using the standard optic component, the 3D printing provides significant cost reduction and, especially, sharing of information between laboratories for easy replication or further modifications, customization of the spatial arrangement, and miniaturization. ...

Jan Prikryl; Frantisek Foret

2014-11-26T23:59:59.000Z

219

Comparison of 2D and 3D gamma analyses  

SciTech Connect

Purpose: As clinics begin to use 3D metrics for intensity-modulated radiation therapy (IMRT) quality assurance, it must be noted that these metrics will often produce results different from those produced by their 2D counterparts. 3D and 2D gamma analyses would be expected to produce different values, in part because of the different search space available. In the present investigation, the authors compared the results of 2D and 3D gamma analysis (where both datasets were generated in the same manner) for clinical treatment plans. Methods: Fifty IMRT plans were selected from the authors clinical database, and recalculated using Monte Carlo. Treatment planning system-calculated (揺valuated dose distributions) and Monte Carlo-recalculated (搑eference dose distributions) dose distributions were compared using 2D and 3D gamma analysis. This analysis was performed using a variety of dose-difference (5%, 3%, 2%, and 1%) and distance-to-agreement (5, 3, 2, and 1 mm) acceptance criteria, low-dose thresholds (5%, 10%, and 15% of the prescription dose), and data grid sizes (1.0, 1.5, and 3.0 mm). Each comparison was evaluated to determine the average 2D and 3D gamma, lower 95th percentile gamma value, and percentage of pixels passing gamma. Results: The average gamma, lower 95th percentile gamma value, and percentage of passing pixels for each acceptance criterion demonstrated better agreement for 3D than for 2D analysis for every plan comparison. The average difference in the percentage of passing pixels between the 2D and 3D analyses with no low-dose threshold ranged from 0.9% to 2.1%. Similarly, using a low-dose threshold resulted in a difference between the mean 2D and 3D results, ranging from 0.8% to 1.5%. The authors observed no appreciable differences in gamma with changes in the data density (constant difference: 0.8% for 2D vs 3D). Conclusions: The authors found that 3D gamma analysis resulted in up to 2.9% more pixels passing than 2D analysis. It must be noted that clinical 2D versus 3D datasets may have additional differences梖or example, if 2D measurements are made with a different dosimeter than 3D measurements. Factors such as inherent dosimeter differences may be an important additional consideration to the extra dimension of available data that was evaluated in this study.

Pulliam, Kiley B.; Huang, Jessie Y.; Howell, Rebecca M.; Followill, David; Kry, Stephen F., E-mail: sfkry@mdanderson.org [Department of Radiation Physics, The University of Texas MD Anderson Cancer Center and The University of Texas Graduate School of Biomedical Sciences at Houston, Houston, Texas 77030 (United States); Bosca, Ryan [Department of Imaging Physics, The University of Texas MD Anderson Cancer Center and The University of Texas Graduate School of Biomedical Sciences at Houston, Houston, Texas 77030 (United States)] [Department of Imaging Physics, The University of Texas MD Anderson Cancer Center and The University of Texas Graduate School of Biomedical Sciences at Houston, Houston, Texas 77030 (United States); O扗aniel, Jennifer [Department of Radiation Oncology, Duke University, Durham, North Carolina 27705 (United States)] [Department of Radiation Oncology, Duke University, Durham, North Carolina 27705 (United States)

2014-02-15T23:59:59.000Z

220

Software: DIF3D - Nuclear Engineering Division (Argonne)  

NLE Websites -- All DOE Office Websites (Extended Search)

D D Software: ETOE-2 MC2-2 SDX DIF3D DIF3DK VIM REBUS-3 RCT ORIGEN-RA VARI3D SE2-ANL (SUPERENERGY2) SAS4A/SASSYS-1 SAS-DIF3DK MSET PRODIAG Join us on Facebook Follow us on Twitter NE on Flickr Celebrating the 70th Anniversary of Chicago Pile 1 (CP-1) Argonne OutLoud on Nuclear Energy Argonne Energy Showcase 2012 Software DIF3D (Diffusion and Transport Theory Codes) Bookmark and Share Standard Code Description NAME AND TITLE DIF3D 10.0: Code System Using Variational Nodal Methods and Finite Difference Methods to Solve Neutron Diffusion and Transport Theory Problems. CONTRIBUTOR K. L. Derstine Nuclear Engineering Division Argonne National Laboratory, Argonne, Illinois 60439. CODING LANGUAGE AND COMPUTER Fortran 90 and C source code for Linux PCs, MacOSX and SUN, (C00784MNYCP00).

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

3-D Earth model more accurately pinpoints explosions  

NLE Websites -- All DOE Office Websites (Extended Search)

3-D Earth model more accurately pinpoints explosions 3-D Earth model more accurately pinpoints explosions 3-D Earth model more accurately pinpoints explosions The purpose of this model is to assist the U.S. Air Force and the international Comprehensive Nuclear Test Ban Treaty Organization with more accurately locating all types of explosions. October 25, 2013 A one-dimensional velocity profile with depth plotted within a three-dimensional Earth. The colors are compressional wave velocity in km/s. The rays are examples coming from a pseudo station at the North Pole. This model is used as the starting point to calculate the full SALSA3D velocity model. A one-dimensional velocity profile with depth plotted within a three-dimensional Earth. The colors are compressional wave velocity in km/s. The rays are examples coming from a pseudo station at the North Pole.

222

3D Photonic Crystals for Photon Management in Solar Cells  

Science Journals Connector (OSTI)

Photon management is a key element to optimize the optical and electro-optical performance of solar cells. The potential of 3D photonic crystals for photon management in solar cells...

Wehrspohn, Ralf; Sprafke, Alexander

223

3-D Thermoconvection in an Anisotropic Inclined Sedimentary Layer  

Science Journals Connector (OSTI)

......3-D thermoconvection in an anisotropic inclined sedimentary layer...basin generally present an anisotropic structure with maximum permeability...We extend these results to anisotropic media, with anisotropies...are usually embedded in a shale matrix (Busch 1974; Pettijohn......

Anne Ormond; Pierre Genthon

1993-02-01T23:59:59.000Z

224

3D Printing a Classic | Department of Energy  

Energy Savers (EERE)

a Classic 3D Printing a Classic January 15, 2015 - 4:02pm Addthis The team from the Oak Ridge Manufacturing Demonstration Facility is at the Detroit Auto Show this week to...

225

3D Modelling of Enhanced Surface Emission by Surface Roughening  

Science Journals Connector (OSTI)

3D FDTD is used to study the effect of surface roughening on the emission of a point source embedded in GaAs with a mirror behind the dipole. Enhancement factors of 10:1 are observed.

Buss, Ian J; Cryan, Martin J; Ho, Daniel; Craddock, Ian; Nash, Geoff; Haigh, Mary K; Railton, Chris; Rarity, John G

226

Investigation of 3-D Heat Transfer Effects in Fenestration Products.  

E-Print Network (OSTI)

??ABSTRACT INVESTIGATION OF 3-D HEAT TRANSFER EFFECTS IN FENESTRATION PRODUCTS SEPTEMBER 2010 SNEH KUMAR B. TECH., INDIAN INSTITUTE OF TECHNOLOGY, CHENNAI INDIA M.S.M.E., UNIVERSITY OF (more)

Kumar, Sneh

2010-01-01T23:59:59.000Z

227

3D Printed Car at the International Manufacturing Technology...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Courtesy of Local Motors Carbon Fiber Pellets 4 of 6 Carbon Fiber Pellets Pellets of plastic mixed with carbon fiber were used in the production process of the 3D-printed car....

228

Introducing 3D Venn and Euler Diagrams Peter Rodgers1  

E-Print Network (OSTI)

University of Kent, UK p.j.rodgers@kent.ac.uk 2 Autodesk, UK 3 Visual Modelling Group, University of Brighton Venn-3s. www.eulerdiagrams.com/3D/workshop/. Using the freely available Autodesk Design Review software

Kent, University of

229

BUILD YOUR OWN 3D GLASSES! Oaktag (sturdy poster board)  

E-Print Network (OSTI)

BUILD YOUR OWN 3D GLASSES! Materials 路 Oaktag (sturdy poster board) 路 Scissors 路 Clear tape 路 Basic or sturdy poster board. Cut the glasses out making sure to also cut out the eyeholes. Step 3 Tape the red

Christian, Eric

230

3D Maneuvers For Asymmetric Under-Actuated Rigid Body  

E-Print Network (OSTI)

single-axis maneuvers and (ii) three-dimensional (3D) coupled maneuvers. The sequential single-axis maneuver strategies are established for torque, time, and fuel minimization applications. The resulting control laws are more complicated than...

Kim, Dong Hoon

2013-08-01T23:59:59.000Z

231

3D Printed Quantum Dot Light-Emitting Diodes  

Science Journals Connector (OSTI)

Developing the ability to 3D print various classes of materials possessing distinct properties could enable the freeform generation of active electronics in unique functional, interwoven architectures. ... Finally, we show that novel architectures that are not easily accessed using standard microfabrication techniques can be constructed, by 3D printing a 2 2 2 cube of encapsulated LEDs, in which every component of the cube and electronics are 3D printed. ... These include (1) increasing the resolution of the 3D printer such that smaller devices can be printed, (2) improving the performance and yield of the printed devices, and (3) incorporating other classes of nanoscale functional building blocks and devices, including semiconductor, plasmonic, and ferroelectric materials. ...

Yong Lin Kong; Ian A. Tamargo; Hyoungsoo Kim; Blake N. Johnson; Maneesh K. Gupta; Tae-Wook Koh; Huai-An Chin; Daniel A. Steingart; Barry P. Rand; Michael C. McAlpine

2014-10-31T23:59:59.000Z

232

Quantitative Data Analysis Methods for 3D Microstructure  

E-Print Network (OSTI)

of electrochemical ceramic devices such as solid oxide fuel and electrolyser cells depends on the distributionQuantitative Data Analysis Methods for 3D Microstructure Characterization of Solid Oxide Cells

233

3-D Earth model more accurately pinpoints explosions  

NLE Websites -- All DOE Office Websites (Extended Search)

3-D Earth model more accurately pinpoints explosions The purpose of this model is to assist the U.S. Air Force and the international Comprehensive Nuclear Test Ban Treaty...

234

3D EMHD reconnection in a laboratory plasma  

Science Journals Connector (OSTI)

In a large laboratory plasma, reconnection of three-dimensional (3D) magnetic fields is studied in the parameter regime of electron magnetohydrodynamics (EMHD). The field topologies are spheromak-like with two-di...

R. L. Stenzel; J. M. Urrutia; M. C. Griskey; K. D. Strohmaier

2001-06-01T23:59:59.000Z

235

A fast 3D full-wave solver for nanophotonics  

E-Print Network (OSTI)

Conventional fast integral equation solvers seem to be ideal approaches for simulating 3-D nanophotonic devices, as these devices are considered to be open structures, generating fields in both an interior channel and in ...

Zhang, Lei, Ph. D. Massachusetts Institute of Technology. Department of Electrical Engineering and Computer Science.

2007-01-01T23:59:59.000Z

236

Segmentation of 3D Meshes through Spectral Clustering  

E-Print Network (OSTI)

2 , 2/ , ji eji D W - = 2/12/1 -- = WLLO L : diagonal matrix of W 's row sums Normalization PG '04Segmentation of 3D Meshes through Spectral Clustering Rong Liu, Hao Zhang GrUVi Lab, Simon Fraser

Zhang, Richard "Hao"

237

3D pose estimation and segmentation using specular cues  

E-Print Network (OSTI)

We present a system for fast model-based segmentation and 3D pose estimation of specular objects using appearance based specular features. We use observed (a) specular reflection and (b) specular flow as cues, which are ...

Raskar, Ramesh

238

3D printing: a valuable resource in human anatomy education  

Science Journals Connector (OSTI)

In addition to known methods such as plastination and Thiel method embalming, a new three-dimensional printing system (3D printing) has been developed recently梐n innovative approach...

Mauro Vaccarezza; Veronica Papa

2014-10-01T23:59:59.000Z

239

Effective elastic properties of randomly fractured soils: 3D numerical ...  

E-Print Network (OSTI)

The standard Gassmann equation cannot be applied to our 3D fractured media ... Finite-difference methods discretize the wave equation on a grid. They replace ...... 55/2-2) and the Wave Inversion Technology (WIT) Consor- tium project for...

Pinnacle

2004-04-23T23:59:59.000Z

240

3-D Seismic Methods for Shallow Imaging Beneath Pavement  

E-Print Network (OSTI)

The research presented in this dissertation focuses on survey design and acquisition of near-surface 3D seismic reflection and surface wave data on pavement. Increased efficiency for mapping simple subsurface interfaces ...

Miller, Brian

2013-05-31T23:59:59.000Z

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

3D Tracking at the Nanoscale | The Ames Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

3D Tracking at the Nanoscale A new theory shows that reactivity at catalytic sites inside narrow pores is controlled by how molecules move at the pore openings. Like cars...

242

An alternative derivation of the Minimal massive 3D gravity  

E-Print Network (OSTI)

By using the algebra of exterior forms and the first order formalism with constraints, an alternative derivation of the field equations for the Minimal massive 3D gravity model is presented.

Ahmet Baykal

2014-08-22T23:59:59.000Z

243

Computational imaging for 3D phase and coherence retrieval |...  

NLE Websites -- All DOE Office Websites (Extended Search)

Computational imaging for 3D phase and coherence retrieval Wednesday, December 10, 2014 - 3:00pm SLAC, Redtail Hawk Conference Room 108A Speaker: Laura Waller (UC Berkeley) Program...

244

Observing Warm Clouds in 3D Using ARM Scanning Cloud  

NLE Websites -- All DOE Office Websites (Extended Search)

Observing Warm Clouds in 3D Using ARM Scanning Cloud Radars and a Novel Ensemble Method For original submission and image(s), see ARM Research Highlights http:www.arm.gov...

245

3D Representations for Software Visualization Andrian Marcus  

E-Print Network (OSTI)

research from software analysis, information visualization, human-computer interaction, and cognitive, texture, abstraction mechanism, and by supporting new manipulation techniques and user interfaces.2 [Information Interfaces and Presentation] User Interfaces Keywords: Software visualization, 3D visualization

246

Further Analysis of 3D Magnetotelluric Measurements Over the Coso  

Open Energy Info (EERE)

Further Analysis of 3D Magnetotelluric Measurements Over the Coso Further Analysis of 3D Magnetotelluric Measurements Over the Coso Geothermal Field Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Proceedings: Further Analysis of 3D Magnetotelluric Measurements Over the Coso Geothermal Field Details Activities (1) Areas (1) Regions (0) Abstract: At last year's GRC annual meeting we presented initial results of a 3D investigation of the Coso Geothermal field utilizing a dense grid of magnetotelluric (MT) stations plus a single line of contiguous bipole array profiling over the east flank of the field (Newman et al., 2005). Motivation for this study is that electrical resistivity/ conductivity mapping can contribute to better improved understanding of enhanced geothermal systems (EGS) by imaging the geometry, bounds and controlling

247

3-D Earth model more accurately pinpoints explosions  

NLE Websites -- All DOE Office Websites (Extended Search)

3-D Earth model more accurately pinpoints explosions 3-D Earth model more accurately pinpoints explosions 3-D Earth model more accurately pinpoints explosions The purpose of this model is to assist the U.S. Air Force and the international Comprehensive Nuclear Test Ban Treaty Organization with more accurately locating all types of explosions. October 25, 2013 A one-dimensional velocity profile with depth plotted within a three-dimensional Earth. The colors are compressional wave velocity in km/s. The rays are examples coming from a pseudo station at the North Pole. This model is used as the starting point to calculate the full SALSA3D velocity model. A one-dimensional velocity profile with depth plotted within a three-dimensional Earth. The colors are compressional wave velocity in km/s. The rays are examples coming from a pseudo station at the North Pole.

248

Development of an embedded 3D graphics processor  

E-Print Network (OSTI)

DEVELOPMENT OF AN EMBEDDED 3D GRAPHICS PROCESSOR A Thesis by BRIAN MURRAY Submitted to the Office of Graduate Studies of Texas ARM University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE May 2002 Major... Subject: Computer Engineering DEVELOPMENT OF AN EMBEDDED 3D GRAPHICS PROCESSOR A Thesis by BRIAN MURRAY Submitted to Texas ASM University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Approved as to style...

Murray, Brian

2012-06-07T23:59:59.000Z

249

Object segmentation and classification using 3-D range camera  

Science Journals Connector (OSTI)

This paper proposes a vision system using a 3-D range camera for scene segmentation and pedestrian classification. The system detects and segments objects in the foreground, measures their distances to the camera, and classifies them into pedestrians ... Keywords: 3-D range image segmentation, Assistive navigation, Feature extraction, Image segmentation evaluation, Object classification, Pedestrian classification, RGB-D image processing, Range/intensity image processing

Xue Wei; Son Lam Phung; Abdesselam Bouzerdoum

2014-01-01T23:59:59.000Z

250

Reconhecimento de modelos 3D em realidade aumentada m髒el  

Science Journals Connector (OSTI)

In order to use Mobile Augmented Reality (AR) in a Participatory Design of a leisure area, the application equipAR! for iPad was developed. The purpose of this application is to enable the visualization and interaction in AR of 3D models of urban equipment ... Keywords: iPad application, mobile augmented reality, perception, recognition of 3D models, tangible augmented reality

Ana Regina M. Cuperschmid; Regina Coeli Ruschel; Ana Maria R. de G. Monteiro

2013-10-01T23:59:59.000Z

251

Patient specific 3D printed phantom for IMRT quality assurance  

Science Journals Connector (OSTI)

The purpose of this study was to test the feasibility of a patient specific phantom for patient specific dosimetric verification.Using the head and neck region of an anthropomorphic phantom as a substitute for an actual patient, a soft-tissue equivalent model was constructed with the use of a 3D printer. Calculated and measured dose in the anthropomorphic phantom and the 3D printed phantom was compared for a parallel-opposed head and neck field geometry to establish tissue equivalence. A nine-field IMRT plan was constructed and dose verification measurements were performed for the 3D printed phantom as well as traditional standard phantoms.The maximum difference in calculated dose was 1.8% for the parallel-opposed configuration. Passing rates of various dosimetric parameters were compared for the IMRT plan measurements; the 3D printed phantom爎esults showed greater disagreement at superficial depths than other methods.A custom phantom was created using a 3D printer. It was determined that the use of patient specific phantoms to perform dosimetric verification and estimate the dose in the patient is feasible. In addition, end-to-end testing on a per-patient basis was possible with the 3D printed phantom. Further refinement of the phantom construction process is needed for routine use.

Eric D Ehler; Brett M Barney; Patrick D Higgins; Kathryn E Dusenbery

2014-01-01T23:59:59.000Z

252

Toward single cell traction microscopy within 3D collagen matrices  

SciTech Connect

Mechanical interaction between the cell and its extracellular matrix (ECM) regulates cellular behaviors, including proliferation, differentiation, adhesion, and migration. Cells require the three-dimensional (3D) architectural support of the ECM to perform physiologically realistic functions. However, current understanding of cell朎CM and cell朿ell mechanical interactions is largely derived from 2D cell traction force microscopy, in which cells are cultured on a flat substrate. 3D cell traction microscopy is emerging for mapping traction fields of single animal cells embedded in either synthetic or natively derived fibrous gels. We discuss here the development of 3D cell traction microscopy, its current limitations, and perspectives on the future of this technology. Emphasis is placed on strategies for applying 3D cell traction microscopy to individual tumor cell migration within collagen gels. - Highlights: Review of the current state of the art in 3D cell traction force microscopy. Bulk and micro-characterization of remodelable fibrous collagen gels. Strategies for performing 3D cell traction microscopy within collagen gels.

Hall, Matthew S. [Department of Biological and Environmental Engineering, Cornell University, Ithaca, NY 14853 (United States); Long, Rong [Department of Mechanical Engineering, University of Alberta, Edmonton, AB, Canada T6G 2G8 (Canada); Feng, Xinzeng [Department of Mechanical and Aerospace Engineering, Cornell University, Ithaca, NY 14853 (United States); Huang, YuLing [Department of Biological and Environmental Engineering, Cornell University, Ithaca, NY 14853 (United States); Hui, Chung-Yuen [Department of Mechanical and Aerospace Engineering, Cornell University, Ithaca, NY 14853 (United States); Wu, Mingming, E-mail: mw272@cornell.edu [Department of Biological and Environmental Engineering, Cornell University, Ithaca, NY 14853 (United States)

2013-10-01T23:59:59.000Z

253

3D printing facilitated scaffold-free tissue unit fabrication  

Science Journals Connector (OSTI)

Tissue spheroids hold great potential in tissue engineering as building blocks to assemble into functional tissues. To date, agarose molds have been extensively used to facilitate fusion process of tissue spheroids. As a molding material, agarose typically requires low temperature plates for gelation and/or heated dispenser units. Here, we proposed and developed an alginate-based, direct 3D mold-printing technology: 3D printing microdroplets of alginate solution into biocompatible, bio-inert alginate hydrogel molds for the fabrication of scaffold-free tissue engineering constructs. Specifically, we developed a 3D printing technology to deposit microdroplets of alginate solution on calcium containing substrates in a layer-by-layer fashion to prepare ring-shaped 3D hydrogel molds. Tissue spheroids composed of 50% endothelial cells and 50% smooth muscle cells were robotically placed into the 3D printed alginate molds using a 3D printer, and were found to rapidly fuse into toroid-shaped tissue units. Histological and immunofluorescence analysis indicated that the cells secreted collagen type I playing a critical role in promoting cell朿ell adhesion, tissue formation and maturation.

Yu Tan; Dylan J Richards; Thomas C Trusk; Richard P Visconti; Michael J Yost; Mark S Kindy; Christopher J Drake; William Scott Argraves; Roger R Markwald; Ying Mei

2014-01-01T23:59:59.000Z

254

Oceans '88  

SciTech Connect

These proceedings discuss the following papers: Solid waste disposal crisis; Plastics in Ocean; Continental shelf environmental research; Seafood technology advancements; Gulf of Mexico chemosynthetic petroleum seep communities; Water reuse on onshore mariculture and processing facilities; Oil and gas industry conflicts on the outer continental shelf; Cumulative environmental effects of the oil and gas leasing program; Oil and gas exploration; and Oil and gas resource management; Aids to navigation systems and equipment; and Surveillance experiments.

Not Available

1988-01-01T23:59:59.000Z

255

Optical Properties of 3D Printable Plastics in the THz Regime and their Application for 3D Printed THz Optics  

Science Journals Connector (OSTI)

We characterize the terahertz (THz) properties of several materials which can be used for fused material deposition 3D printing. We identify Polystyrene as a material which ... compromise between printability and...

S. F. Busch; M. Weidenbach; M. Fey

2014-10-01T23:59:59.000Z

256

3D Image Viz-Analysis Tools and V3D Development Hackathon, July 26 -August 8, 2010  

E-Print Network (OSTI)

- Hacking / Dinner at Bob's Pub #12;3D Image Viz-Analysis Tools and V3D Development Hackathon, July 26, Zongcai Ruan, and Luis Ibanez 12:00-1:00 pm Lunch 1:00 pm- Hacking / Dinner at Bob's Pub July 28, 29, 30 to talk about their problems. See schedule below) 12:00-1:00 pm Lunch 1:00 pm- Hacking / Dinner at Bob

Peng, Hanchuan

257

NEBU_3D: A fast pseudo-3D photoionization code for aspherical planetary nebulae and HII regions  

E-Print Network (OSTI)

We describe a pseudo-3D photoionization code, NEBU_3D and its associated visualization tool, VIS_NEB3D, which are able to easily and rapidly treat a wide variety of nebular geometries, by combining models obtained with a 1D photoionization code. We also present a tool, VELNEB_3D, which can be applied to the results of 1D or 3D photoionization codes to generate emission line profiles, position-velocity maps and 3D maps in any emission line by assuming an arbitrary velocity field. As examples of the capabilities of these new tools, we consider three very different theoretical cases. The first one is a blister HII region, for which we have also constructed a spherical model (the spherical impostor) which has exactly the same Hbeta surface brightness distribution as the blister model and the same ionizing star. The second example shows how complex line profiles can be obtained even with a simple expansion law if the nebula is bipolar and the slit slightly off-center. The third example shows different ways to produce line profiles that could be attributed to a turbulent velocity field while there is no turbulence in the model.

C. Morisset; G. Stasinska; M. Pena

2005-09-22T23:59:59.000Z

258

Ocean and Sea Ice SAF Technical Note  

E-Print Network (OSTI)

Ocean and Sea Ice SAF Technical Note SAF/OSI/CDOP/KNMI/TEC/RP/147 Validation of ASCAT 12.5-km winds The Ocean and Sea Ice Satellite Application Facility (OSI SAF) delivers an operational level 2 wind product produces a level 1 product with 12.5-km WVC spacing that has a resolution of approximately 25 km. Since

Stoffelen, Ad

259

2D?3D polycatenated and 3D?3D interpenetrated metal杘rganic frameworks constructed from thiophene-2,5-dicarboxylate and rigid bis(imidazole) ligands  

SciTech Connect

Hydrothermal reactions of rigid 1,4-bis(imidazol-1-yl)benzene (dib) and 1,4-bis(imidazol-1-yl)-2,5-dimethylbenzene (dimb) with deprotonated thiophene-2,5-dicarboxylic acid (H{sub 2}tdc) in the presence of Zn(II) and Cd(II) salts in H{sub 2}O produced three new metal杘rganic frameworks, namely, [Zn(-tdc)(H{sub 2}O)(-dib)]{sub n} (1), [Cd(-tdc)(H{sub 2}O)(-dib)]{sub n} (2), and ([Cd{sub 2}(祘sub 3}-tdc){sub 2}(-dimb){sub 2}](H{sub 2}O)){sub n}(3). These MOFs were characterized by FT-IR spectroscopy, elemental, thermal (TG, DTA, DTG and DSC), and single-crystal X-ray diffraction analyses. Isomorphous complexes 1 and 2 reveal polycatenated 2D+2D?3D framework based on an undulated (4,4)-sql layer. Complex 3 exhibits a new 4-fold interpenetrating 3D framework with the point symbol of 6{sup 6}. Molecular simulations were used to assess the potentials of the complexes for H{sub 2} storage application. Moreover, these coordination polymers exhibit blue fluorescent emission bands in the solid state at room temperature. - Graphical abstract: In this study, hydrothermal reactions of rigid 1,4-bis(imidazol-1-yl)benzene (dib) and 1,4-bis(imidazol-1-yl)-2,5-dimethylbenzene (dimb) with deprotonated thiophene-2,5-dicarboxylic acid (H{sub 2}tdc) in the presence of Zn(II) and Cd(II) salts in H{sub 2}O produced three new metal杘rganic frameworks. Isomorphous complexes 1 and 2 reveal polycatenated 2D+2D?3D framework based on an undulated (4,4)-sql layer. Complex 3 exhibits a new 4-fold interpenetrating 3D framework with the point symbol of 6{sup 6}. Molecular simulations were used to assess the potentials of the complexes for H{sub 2} storage application. These coordination polymers exhibit blue fluorescent emission bands in the solid state at room temperature. Display Omitted - Highlights: Complexes 1 and 2 display polycatenated 2D+2D?3D framework. Complex 3 exhibits a new 4-fold interpenetrating 3D framework. Complex 1 adsorbs the highest amount of H{sub 2} at 100 bar and 298 K. Complexes display blue fluorescent emission bands.

Erer, Hakan [Department of Chemistry, Faculty of Arts and Sciences, Eski?ehir Osmangazi University, 26480 Eski?ehir (Turkey); Ye?ilel, Okan Zafer, E-mail: yesilel@ogu.edu.tr [Department of Chemistry, Faculty of Arts and Sciences, Eski?ehir Osmangazi University, 26480 Eski?ehir (Turkey); Ar?c?, M黵sel [Department of Chemistry, Faculty of Arts and Sciences, Eski?ehir Osmangazi University, 26480 Eski?ehir (Turkey); Keskin, Seda [Department of Chemical and Biological Engineering, Ko University, ?stanbul (Turkey); B鼀黭g黱g鰎, Orhan [Department of Physics, Faculty of Arts and Sciences, Ondokuz May?s University, 55139 Samsun (Turkey)

2014-02-15T23:59:59.000Z

260

Enhanced 2D/3D Approaches Based on Relevance Index for 3D-Shape Retrieval Mohamed Chaouch, Anne Verroust-Blondet  

E-Print Network (OSTI)

Enhanced 2D/3D Approaches Based on Relevance Index for 3D-Shape Retrieval Mohamed Chaouch, Anne.Chaouch,Anne.Verroust}@inria.fr Shape Modeling International'06, Matsushima, June 14-16, 2006 Abstract We present a new approach for 3D model indexing and retrieval using 2D/3D shape descriptors based on silhou- ettes or depth-buffer images

Paris-Sud XI, Universit茅 de

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

SunFloor 3D: A Tool for Networks on Chip Topology Synthesis for 3D Systems on Ciprian Seiculescu , Srinivasan Murali  

E-Print Network (OSTI)

SunFloor 3D: A Tool for Networks on Chip Topology Synthesis for 3D Systems on Chips Ciprian an efficient Network on Chip (NoC) intercon- nect for a 3D SoC that not only meets the application performance constraints, but also the constraints imposed by the 3D technology, is a significant challenge. In this work

De Micheli, Giovanni

262

Scanning Cloud Radar Observations at Azores: Preliminary 3D Cloud Products  

SciTech Connect

The deployment of the Scanning W-Band ARM Cloud Radar (SWACR) during the AMF campaign at Azores signals the first deployment of an ARM Facility-owned scanning cloud radar and offers a prelude for the type of 3D cloud observations that ARM will have the capability to provide at all the ARM Climate Research Facility sites by the end of 2010. The primary objective of the deployment of Scanning ARM Cloud Radars (SACRs) at the ARM Facility sites is to map continuously (operationally) the 3D structure of clouds and shallow precipitation and to provide 3D microphysical and dynamical retrievals for cloud life cycle and cloud-scale process studies. This is a challenging task, never attempted before, and requires significant research and development efforts in order to understand the radar's capabilities and limitations. At the same time, we need to look beyond the radar meteorology aspects of the challenge and ensure that the hardware and software capabilities of the new systems are utilized for the development of 3D data products that address the scientific needs of the new Atmospheric System Research (ASR) program. The SWACR observations at Azores provide a first look at such observations and the challenges associated with their analysis and interpretation. The set of scan strategies applied during the SWACR deployment and their merit is discussed. The scan strategies were adjusted for the detection of marine stratocumulus and shallow cumulus that were frequently observed at the Azores deployment. Quality control procedures for the radar reflectivity and Doppler products are presented. Finally, preliminary 3D-Active Remote Sensing of Cloud Locations (3D-ARSCL) products on a regular grid will be presented, and the challenges associated with their development discussed. In addition to data from the Azores deployment, limited data from the follow-up deployment of the SWACR at the ARM SGP site will be presented. This effort provides a blueprint for the effort required for the development of 3D cloud products from all new SACRs that the program will deploy at all fixed and mobile sites by the end of 2010.

Kollias, P.; Johnson, K.; Jo, I.; Tatarevic, A.; Giangrande, S.; Widener, K.; Bharadwaj, N.; Mead, J.

2010-03-15T23:59:59.000Z

263

Propagation in 3D of microwaves through density perturbations  

E-Print Network (OSTI)

Simulations using 3D and 2D full-wave codes have shown that edge filaments in tokamak plasmas can significantly affect the propagation of microwaves across a broad frequency spectrum, resulting in scattering angles of up to 46 degrees. Parameter scans were carried out for density perturbations comparable in width and amplitude to MAST filaments and the effect on the measured emission was calculated. 3D effects were discovered in the case of an obliquely incident beam. In general, the problem of EM propagation past wavelength-sized 3D inhomogeneities is not well understood, yet is of importance for both heating and diagnostic applications in the electron cyclotron frequency range for tokamaks, as well as atmospheric physics. To improve this understanding, a new cold-plasma code, EMIT-3D, was written to extend full-wave microwave simulations in magnetized plasmas to 3D, and make comparisons to the existing 2D code IPF-FDMC. This work supports MAST experiments using the SAMI diagnostic to image microwave emissio...

Williams, T R N; O'Brien, M R; Vann, R G L

2013-01-01T23:59:59.000Z

264

AUTOMATED MODELING OF 3D BUILDING ROOFS USING IMAGE AND LIDAR DATA  

E-Print Network (OSTI)

AUTOMATED MODELING OF 3D BUILDING ROOFS USING IMAGE AND LIDAR DATA N. Demir* , E. Baltsavias, Detection, 3D Modelling ABSTRACT: In this work, an automated approach for 3D building roof modelling on the 3D building roof modelling. Buildings have a critical role for 3D city models, decision support

Schindler, Konrad

265

3 July 2003 HIRES3D -ITC Research Seminar -Robert Hack 1 HIGH RESOLUTION REMOTE SENSING  

E-Print Network (OSTI)

3 July 2003 HIRES3D - ITC Research Seminar - Robert Hack 1 HIRES3D HIGH RESOLUTION REMOTE SENSING FOR 3D GROUND MODELING AND CLASSIFICATION ITC Research Seminar, 3 July 2003 Robert Hack International Seminar - Robert Hack 2 HIRES3D HIGH RESOLUTION REMOTE SENSING FOR 3D GROUND MODELING AND CLASSIFICATION

Hack, Robert

266

A novel framework for exploring 3-D FPGAs with heterogeneous interconnect fabric  

Science Journals Connector (OSTI)

A heterogeneous interconnect architecture can be a useful approach for the design of 3-D FPGAs. A methodology to investigate heterogeneous interconnection schemes for 3-D FPGAs under different 3-D fabrication technologies is proposed. Application of ... Keywords: 3-D integration, 3-D reconfigurable architectures, FPGAs, design framework, interconnection fabric

Kostas Siozios; Vasilis F. Pavlidis; Dimitrios Soudris

2012-03-01T23:59:59.000Z

267

3D analysis of the performances degradation caused by series resistance in concentrator solar cells  

SciTech Connect

This paper deals with the modeling of series resistance components in silicon concentrator solar cells. The main components of the macroscopic series resistance are analyzed by means of one-dimensional (1D), two-dimensional (2D), and three-dimensional (3D) numerical simulations. It is shown that the contribution of the lateral current flux, flowing along the emitter region, and of the transverse current flux, flowing along the metal grid, cannot be neglected and, hence, the operation of solar cells subjected to high current densities cannot be described by simple one-dimensional models. The percentage weight of 2D and 3D components on the total value of the series resistance is evaluated and rules for the proper design of the cell geometries are given. An analysis of the effectiveness of the most popular methods for the extraction of the series resistance from the I-V curves of solar cells is also proposed. (author)

Daliento, Santolo [Department of Electronic Engineering and TLC, University of Naples ''Federico II'', Via Claudio 21, 80125 Napoli (Italy); Lancellotti, Laura [ENEA Research Center, Localita Granatello, 80055 Portici (Italy)

2010-01-15T23:59:59.000Z

268

A heightened radiosensitivity of stromal fibroblasts in 3D matrix  

NLE Websites -- All DOE Office Websites (Extended Search)

heightened radiosensitivity of stromal fibroblasts in 3D matrix heightened radiosensitivity of stromal fibroblasts in 3D matrix X. Liu, K. McHenry & Z. Yuan. Department of Genetics and Complex Diseases, Harvard School of Public Health, Boston, MA 02115 Our recent study suggested that stromal fibroblasts can sensitize cocultured epithelial cells to radiation exposure. Since stromal fibroblasts exhibit highly elongated cytoplasmic extensions (pseudopodia), which as shown in our previous study are essential to guide neighboring epithelial cells to form branching ducts, we asked whether radiation could interfere with the formation of fibroblasts' pseudopodium, which would then impair their ability to structurally and functionally support the associated epithelial cells. For this, HMFs were seeded in 3D and were either mock-treated or irradiated 24 h

269

Virtual Frog Dissection: Interactive 3D Graphics Via the Web  

NLE Websites -- All DOE Office Websites (Extended Search)

Dissection: Interactive 3D Graphics Via the Web Dissection: Interactive 3D Graphics Via the Web David Robertson, William Johnston, and Wing Nip Imaging and Distributed Computing Group Lawrence Berkeley National Laboratory Published in Proceedings, The Second International WWW Conference '94: Mosaic and the Web, Chicago, IL (1994). Hyperlinks have been updated periodically to replace stale links. ABSTRACT We have developed a set of techniques for providing interactive 3D graphics via the World Wide Web (WWW) as part of the ``Whole Frog'' project [ 1 ]. We had three goals: (1) to provide K-12 biology students with the ability to explore the anatomy of a frog with a virtual dissection tool; (2) to show the feasibility of interactive visualization over the Web; and (3) to show the possibility for the Web and its associated browsers to be an

270

3D Visualization of Water Transport in Ferns  

NLE Websites -- All DOE Office Websites (Extended Search)

3D Visualization of Water Transport 3D Visualization of Water Transport in Ferns 3D Visualization of Water Transport in Ferns Print Monday, 08 April 2013 00:00 Plants transport water through elongated cells called xylem. However, in trees such as eucalyptus or redwood, the xylem tissue-better known as wood-bears the weight of the branches and leaves, giving rise to the often massive canopies characteristic of these species. We know much about water transport in woody plants, but considerably less about primitive plants such as ferns. Not only have ferns played an important role in the evolution of trees and shrubs but collectively, these plant forms are a fascinating study in contrasts because ferns use xylem strictly for water transport, leaving structural support to other tissues. Given the global distribution and impressive diversity of ferns, how has their xylem evolved to deal with variable habitat water availability?

271

A 3-D Link between Antibiotic Resistance and Brain Disease  

NLE Websites -- All DOE Office Websites (Extended Search)

A 3-D Link between Antibiotic Resistance and Brain Disease A 3-D Link between Antibiotic Resistance and Brain Disease The story of what makes certain types of bacteria resistant to a specific antibiotic has a sub-plot that gives insight into the cause of a rare form of brain degeneration among children, according to investigators at St. Jude Children's Research Hospital. The story takes a twist as key differences among the structures of its main molecular characters disappear and reappear as they are assembled in the cell. The story is based on a study of the three-dimensional (3-D) structure of an enzyme called pantothenate kinase, which triggers the first step in the production coenzyme A (CoA), a molecule that is indispensable to all forms of life. Enzymes are proteins that speed up biochemical reactions. CoA plays a pivotal role in the cells' ability to extract energy from fatty

272

3D gravity and non-linear cosmology  

E-Print Network (OSTI)

By the inclusion of an additional term, non-linear in the scalar curvature $R$, it is tested if dark energy could rise as a geometrical effect in 3D gravitational formulations. We investigate a cosmological fluid obeying a non-polytropic equation of state (the van der Waals equation) that is used to construct the energy-momentum tensor of the sources, representing the hypothetical inflaton in gravitational interaction with a matter contribution. Following the evolution in time of the scale factor, its acceleration, and the energy densities of constituents it is possible to construct the description of an inflationary 3D universe, followed by a matter dominated era. For later times it is verified that, under certain conditions, the non-linear term in $R$ can generate the old 3D universe in accelerated expansion, where the ordinary matter is represented by the barotropic limit of the van der Waals constituent.

F. P. Devecchi; M. L. Froehlich

2005-10-11T23:59:59.000Z

273

Building Energy Software Tools Directory: Look3D  

NLE Websites -- All DOE Office Websites (Extended Search)

Look3D Look3D Look3D logo. A Windows program that creates three-dimensional, full-color surface plots from columnar data. These surface plots can be rotated and customized. Keywords three-dimensional, full-color surface plots from columnar data, energy-use data Validation/Testing N/A Expertise Required No special expertise required. Users International. Audience Anyone analyzing time series data. Input ASCII space delimited numeric files. Input should have time stamp for maximum usability. Output Visualization on screen. Computer Platform Windows 3.1 or higher. Programming Language Visual C++ (source not available). Strengths Particularly useful for visualizing load profile changes over time. Weaknesses N/A Contact Company: Energy Systems Laboratory Address: Building Energy Analysis Division

274

ARM - Publications: Science Team Meeting Documents: Application of 3D  

NLE Websites -- All DOE Office Websites (Extended Search)

Application of 3D Radiative Transfer to Mountains Application of 3D Radiative Transfer to Mountains Chen, Yong UCLA Hall, Alex University of California, Los Angeles Liou, Kuo-Nan UCLA A large part of the land surface is not flat, but vertically structured. In mountain terrain, accurate calculations of the net radiation for slopes of varying gradient and orientation are of considerable importance in determining the energy budget of the surface. In order to evaluate the surface variations of total solar irradiance, it is necessary to calculate the direct, diffuse and terrain-reflected components. A 3D Monte Carlo radiative transfer model has been developed and applied to mountain surfaces to study the diurnal and seasonal changes in surface fluxes by choosing 9 different solar zenith angles, including noon, sunrise+1/2 hour,

275

3D Magnetotelluric characterization of the COSO GeothermalField  

SciTech Connect

Knowledge of the subsurface electrical resistivity/conductivity can contribute to a better understanding of complex hydrothermal systems, typified by Coso geothermal field, through mapping the geometry (bounds and controlling structures) over existing production. Three-dimensional magnetotelluric (MT) inversion is now an emerging technology for characterizing the resistivity structures of complex geothermal systems. The method appears to hold great promise, but histories exploiting truly 3D inversion that demonstrate the advantages that can be gained by acquiring and analyzing MT data in three dimensions are still few in number. This project will address said issue, by applying 3D MT forward modeling and inversion to a MT data set acquired over the Coso geothermal field. The goal of the project is to provide the capability to image large geothermal reservoirs in a single self-consistent model. Initial analysis of the Coso MT data has been carried out using 2D MT imaging technology to construct an initial 3D resistivity model from a series of 2D resistivity images obtained using the inline electric field measurements (Zxy impedance elements) along different measurement transects. This model will be subsequently refined through a 3D inversion process. The initial 3D resistivity model clearly shows the controlling geological structures possibly influencing well production at Coso. The field data however, also show clear three dimensionality below 1 Hz, demonstrating the limitations of 2D resistivity imaging. The 3D MT predicted data arising from this starting model show good correspondence in dominant components of the impedance tensor (Zxy and Zyx) above 1Hz. Below 1 Hz there is significant differences between the field data and the 2D model data.

Newman, Gregory A.; Hoversten, Michael; Gasperikova, Erika; Wannamaker, Philip E.

2005-01-01T23:59:59.000Z

276

Dynamically Coupled 3D Pollutant Dispersion Model for Assessing Produced Water Discharges in the Canadian Offshore Area  

Science Journals Connector (OSTI)

Dynamically Coupled 3D Pollutant Dispersion Model for Assessing Produced Water Discharges in the Canadian Offshore Area ... The collected samples of produced water and seawater were analyzed by the COOGER (Centre for Offshore Oil and Gas Environmental Research) at the Fisheries and Oceans Canada, Environmental Engineering labrotary at the Concordia University, and the Trace Analysis Facility (TAF) at the University of Regina. ... In Offshore Oil and Gas Environmental Effects Monitoring Approaches and Technologies; Armsworthy, S. L.; Cranford, P. J.; Lee, K., Eds.; Battelle Memorial Institute: Columbus, OH 2005; pp 319 342. ...

Lin Zhao; Zhi Chen; Kenneth Lee

2012-12-26T23:59:59.000Z

277

Inspection planning for sensor coverage of 3D marine structures  

E-Print Network (OSTI)

We introduce an algorithm to achieve complete sensor coverage of complex, three-dimensional structures surveyed by an autonomous agent with multiple degrees of freedom. Motivated by the application of an ocean vehicle ...

Englot, Brendan

278

RELAP5-3D Code Validation for RBMK Phenomena  

SciTech Connect

The RELAP5-3D thermal-hydraulic code was assessed against Japanese Safety Experiment Loop (SEL) and Heat Transfer Loop (HTL) tests. These tests were chosen because the phenomena present are applicable to analyses of Russian RBMK reactor designs. The assessment cases included parallel channel flow fluctuation tests at reduced and normal water levels, a channel inlet pipe rupture test, and a high power, density wave oscillation test. The results showed that RELAP5-3D has the capability to adequately represent these RBMK-related phenomena.

Fisher, James Ebberly

1999-09-01T23:59:59.000Z

279

RELAP5-3D code validation for RBMK phenomena  

SciTech Connect

The RELAP5-3D thermal-hydraulic code was assessed against Japanese Safety Experiment Loop (SEL) and Heat Transfer Loop (HTL) tests. These tests were chosen because the phenomena present are applicable to analyses of Russian RBMK reactor designs. The assessment cases included parallel channel flow fluctuation tests at reduced and normal water levels, a channel inlet pipe rupture test, and a high power, density wave oscillation test. The results showed that RELAP5-3D has the capability to adequately represent these RBMK-related phenomena.

Fisher, J.E.

1999-09-01T23:59:59.000Z

280

3D Flat Holography: Entropy and Logarithmic Corrections  

E-Print Network (OSTI)

We compute the leading corrections to the Bekenstein-Hawking entropy of the Flat Space Cosmological (FSC) solutions in 3D flat spacetimes, which are the flat analogues of the BTZ black holes in AdS3. The analysis is done by a computation of density of states in the dual 2D Galilean Conformal Field Theory and the answer obtained by this matches with the limiting value of the expected result for the BTZ inner horizon entropy as well as what is expected for a generic thermodynamic system. Along the way, we also develop other aspects of holography of 3D flat spacetimes.

Arjun Bagchi; Rudranil Basu

2013-12-19T23:59:59.000Z

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Polarization Singularities in 2D and 3D Speckle Fields  

Science Journals Connector (OSTI)

The 3D structure of randomly polarized light fields is exemplified by its polarization singularities: lines along which the polarization is purely circular (C lines) and surfaces on which the polarization is linear (L surfaces). We visualize these polarization singularities experimentally in vector laser speckle fields, and in numerical simulations of random wave superpositions. Our results confirm previous analytical predictions [M.?R. Dennis, Opt. Commun. 213, 201 (2002)] regarding the statistical distribution of types of C points and relate their 2D properties to their 3D structure.

Florian Flossmann; Kevin O慔olleran; Mark R. Dennis; Miles J. Padgett

2008-05-22T23:59:59.000Z

282

Modelling Gaia CCD pixels with Silvaco 3D engineering software  

E-Print Network (OSTI)

Gaia will only achieve its unprecedented measurement accuracy requirements with detailed calibration and correction for radiation damage. We present our Silvaco 3D engineering software model of the Gaia CCD pixel and two of its applications for Gaia: (1) physically interpreting supplementary buried channel (SBC) capacity measurements (pocket-pumping and first pixel response) in terms of e2v manufacturing doping alignment tolerances; and (2) deriving electron densities within a charge packet as a function of the number of constituent electrons and 3D position within the charge packet as input to microscopic models being developed to simulate radiation damage.

Seabroke, G M; Hopkinson, G; Burt, D; Robbins, M; Holland, A

2010-01-01T23:59:59.000Z

283

Evolving spherical boson stars on a 3D cartesian grid  

E-Print Network (OSTI)

A code to evolve boson stars in 3D is presented as the starting point for the evolution of scalar field systems with arbitrary symmetries. It was possible to reproduce the known results related to perturbations discovered with 1D numerical codes in the past, which include evolution of stable and unstable equilibrium configurations. In addition, the apparent and event horizons masses of a collapsing boson star are shown for the first time. The present code is expected to be useful at evolving possible sources of gravitational waves related to scalar field objects and to handle toy models of systems perturbed with scalar fields in 3D.

F. Siddhartha Guzman

2004-07-14T23:59:59.000Z

284

STELLOPT Modeling of the 3D Diagnostic Response in ITER  

SciTech Connect

The ITER three dimensional diagnostic response to an n=3 resonant magnetic perturbation is modeled using the STELLOPT code. The in-vessel coils apply a resonant magnetic perturbation (RMP) fi eld which generates a 4 cm edge displacement from axisymmetry as modeled by the VMEC 3D equilibrium code. Forward modeling of flux loop and magnetic probe response with the DIAGNO code indicates up to 20 % changes in measured plasma signals. Simulated LIDAR measurements of electron temperature indicate 2 cm shifts on the low field side of the plasma. This suggests that the ITER diagnostic will be able to diagnose the 3D structure of the equilibria.

Lazerson, Samuel A

2013-05-07T23:59:59.000Z

285

Ocean | Open Energy Information  

Open Energy Info (EERE)

Related Links List of Ocean Thermal Incentives Retrieved from "http:en.openei.orgwindex.php?titleOcean&oldid273467" Categories: Articles with outstanding TODO tasks Sectors...

286

Ocean Observing Ocean Observing Systems (OOS)  

E-Print Network (OSTI)

, national, and global scales. 路 Ocean Observing Systems serve: Fishing industry National security Coastal properties, such as salinity, temperature, and waves Satellite maps of sea surface temperature NATIONAL Integrated Ocean Observing System (IOOS) 11 REGIONAL Systems, including: MANY LOCAL Systems

Schladow, S. Geoffrey

287

School of Art & Design 3D Printing of Relief Forms onto Ceramic Tiles  

E-Print Network (OSTI)

School of Art & Design 3D Printing of Relief Forms onto Ceramic Tiles Lead: Lharne Shaw 3D printing tile production. It will also assess the feasibility of introducing a 3D slip printing system into both

Evans, Paul

288

3D Single Particle Tracking Spectroscopy and Nanoparticles for Interrogating Complex Systems  

E-Print Network (OSTI)

2.4 Real-time 3D single-particle trackingnanoparticles using real-time 3D single-particle tracking. ( axis (Ref. [124]). (b) A 3D representation of detected

Montiel, Daniel

2012-01-01T23:59:59.000Z

289

3D Human Motion Tracking with a Coordinated Mixture of燜actor Analyzers  

E-Print Network (OSTI)

evaluation of video-based 3d person tracking. In IEEELee, C. -S. (2004). Inferring 3D body pose from silhouettesMonocular tracking of 3D human motion with a coordinated

Li, Rui; Tian, Tai-Peng; Sclaroff, Stan; Yang, Ming-Hsuan

2010-01-01T23:59:59.000Z

290

A 3D Model for Ion Beam Formation and Transport Simulation  

E-Print Network (OSTI)

g magnet section. A. Solution of the 3D Poisson Equation inexcellent. B. Solution of the 3D Poisson Equation in Frenet-of distance from the 3D simulation and 2D simulation for a

Qiang, J.; Todd, D.; Leitner, D.

2006-01-01T23:59:59.000Z

291

3D global and regional patterns of human fetal subplate growth determined in utero  

E-Print Network (OSTI)

010-0286-5 ORIGINAL ARTICLE 3D global and regional patternsof multislice MRI for 3D in utero fetal brain imagethe developing brain anatomy in 3D from in utero imaging. We

2011-01-01T23:59:59.000Z

292

3D culture models of normal and malignant breast epithelial cells  

E-Print Network (OSTI)

3D culture models of normal and malignant breast epithelialcells; Lee et al. 3D culture models of normal and malignantFor correspondence: mjbissell@lbl.gov 3D culture models of

Lee, Genee Y.; Kenny, Paraic A.; Lee, Eva H.; Bissell, Mina J.

2006-01-01T23:59:59.000Z

293

A 3D Ultrasound Study of Sinus Tract Formation in Hidradenitis Suppurativa  

E-Print Network (OSTI)

classified as Hurley 1. B. 3D ultrasound image demonstratesclassified as Hurley 1. B. and C. 3D ultrasounds demonstrateas Hurley 2. B. and C. 3D ultrasound images show involvement

Wortsman, Ximena; Jemec, Gregor

2013-01-01T23:59:59.000Z

294

2D and 3D Acoustic Source Localization Using the AML Algorithm and ENSBox Nodes  

E-Print Network (OSTI)

Networked Sensing 2D and 3D Acoustic Source Localizationhairs, median red square) 3D bearing estimates: (azimuth,1.37,1.52) (2.38,1.82) Node 153 3D AML performance UCLA

2007-01-01T23:59:59.000Z

295

The quaternion Bingham Distribution, 3D object detection, and dynamic manipulation  

E-Print Network (OSTI)

Over the past few years, the field of robotic computer vision has undergone a 3-D revolution. One of the biggest challenges in dealing with 3-D geometry lies in appropriately handling 3-D rotational data. To specify "where" ...

Glover, Jared Marshall

2014-01-01T23:59:59.000Z

296

Wire Congestion And Thermal Aware 3D Global Placement  

E-Print Network (OSTI)

Wire Congestion And Thermal Aware 3D Global Placement Karthik Balakrishnan, Vidit Nanda, Siddharth compro- mising total wirelength and via count. Our approach consists of two phases. First, we use a multi and global routing for global wire congestion and maximum temperature reduction. Our experimental results

Lim, Sung Kyu

297

A 3D numerical model for Kepler's supernova remnant  

Science Journals Connector (OSTI)

......28, 1428 Buenos Aires, Argentina 3 Facultad de Ciencias Exactas...Universidad de Buenos Aires, Argentina We present new 3D numerical...density of 103 and an explosion energy of 7-1050-erg. The obtained...the gas pressure. The total energy density E is given by where......

J. C. Toledo-Roy; A. Esquivel; P. F. Vel醶quez; E. M. Reynoso

2014-01-01T23:59:59.000Z

298

3D model-based tracking for UAV indoor localisation  

E-Print Network (OSTI)

3D model-based tracking for UAV indoor localisation C麓eline Teuli`ere, Eric Marchand, Laurent Eck set toward the peaks of the distribution. Motivated by the UAV indoor localisation problem where GPS signal is not available, we validate the algorithm on real image sequences from UAV flights. Index Terms

Paris-Sud XI, Universit茅 de

299

TCAUP FabLab 3D PRINTING ORDER FORM  

E-Print Network (OSTI)

TCAUP FabLab 3D PRINTING ORDER FORM: UNIQ NAME: Zcorp 400/310 10"x 8"x 8" ABS 8"x 8"x 12" or 10"x://www.taubmancollege.umich.edu/digital_tech/digital_fablab/ * ZCorp members below .125" are printed at student's own risk and expense. (reasonable .125"breakage

Kamat, Vineet R.

300

Extra Dimensions: 3D and Time in PDF Documentation  

SciTech Connect

High energy physics is replete with multi-dimensional information which is often poorly represented by the two dimensions of presentation slides and print media. Past efforts to disseminate such information to a wider audience have failed for a number of reasons, including a lack of standards which are easy to implement and have broad support. Adobe's Portable Document Format (PDF) has in recent years become the de facto standard for secure, dependable electronic information exchange. It has done so by creating an open format, providing support for multiple platforms and being reliable and extensible. By providing support for the ECMA standard Universal 3D (U3D) file format in its free Adobe Reader software, Adobe has made it easy to distribute and interact with 3D content. By providing support for scripting and animation, temporal data can also be easily distributed to a wide audience. In this talk, we present examples of HEP applications which take advantage of this functionality. We demonstrate how 3D detector elements can be documented, using either CAD drawings or other sources such as GEANT visualizations as input. Using this technique, higher dimensional data, such as LEGO plots or time-dependent information can be included in PDF files. In principle, a complete event display, with full interactivity, can be incorporated into a PDF file. This would allow the end user not only to customize the view and representation of the data, but to access the underlying data itself.

Graf, Norman A.; /SLAC

2011-11-10T23:59:59.000Z

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Large area 3D helical photonic crystals A. K. Rauba)  

E-Print Network (OSTI)

.1116/1.3640756] I. INTRODUCTION Chiral, coil-spring-like helical photonic crystal structures are useful for optical the helical lattice periodicity and coil pitch of the 3D PhC. This technique con- sists of a simple two

New Mexico, University of

302

Oct 8, 2004 Segmentation of 3D Meshes  

E-Print Network (OSTI)

matrix W using exponential kernel 2 , 2/ , ji eji D W - = 2/12/1 -- = WLLO L : diagonal matrix of W 'sOct 8, 2004 sfsdfsfd 1 Segmentation of 3D Meshes through Spectral Clustering Rong Liu, Hao Zhang Gr

Toronto, University of

303

Photo tourism: exploring photo collections in 3D  

Science Journals Connector (OSTI)

We present a system for interactively browsing and exploring large unstructured collections of photographs of a scene using a novel 3D interface. Our system consists of an image-based modeling front end that automatically computes the viewpoint of each ... Keywords: image-based modeling, image-based rendering, photo browsing, structure from motion

Noah Snavely; Steven M. Seitz; Richard Szeliski

2006-07-01T23:59:59.000Z

304

Coming to grips: 3D printing for accessibility  

Science Journals Connector (OSTI)

In this demonstration, we discuss a case study involving a student with limited hand motor ability and the process of exploring consumer grade, Do-It-Yourself (DIY) technology in order to create a viable assistive solution. This paper extends our previous ... Keywords: 3d printing, assistive technology, children, developmental disability, digital fabrication, motor impairment, rapid prototyping, special education

Erin Buehler, Amy Hurst, Megan Hofmann

2014-10-01T23:59:59.000Z

305

3D object recognition, localization and treatment of rumex  

E-Print Network (OSTI)

Aim of the project 路 Build reliable and robust real time plant detection system.y 路 For a plant:路 Short problem description: 颅 Weed recognition these days. 颅 Vehicle, measurement principle, etc detection only 3D point cloud data will be used. 颅 Color images are to be analyzed too, after segmentation

306

8, 42674308, 2008 3-D retrieval of cloud  

E-Print Network (OSTI)

ACPD 8, 4267颅4308, 2008 3-D retrieval of cloud particle profiles T. Zinner et al. Title Page.0 License. Atmospheric Chemistry and Physics Discussions Remote sensing of cloud sides of deep convection: towards a three-dimensional retrieval of cloud particle size profiles T. Zinner 1,2 , A. Marshak 1 , S

Paris-Sud XI, Universit茅 de

307

Computation of optimized arrays for 3-D electrical imaging surveys  

Science Journals Connector (OSTI)

......the resistivity of the water (rho 0 = 13.8 omegam...from measurements of the water resistivity) within...to 10-000 times the water resistivity for the material...imaging at a heterogeneous remediation site. Geophysics (2004...A.J. , et al. 3D ground model development for......

M. H. Loke; P. B. Wilkinson; S. S. Uhlemann; J. E. Chambers; L. S. Oxby

2014-01-01T23:59:59.000Z

308

A data-mapping approach to 3-D wavefield redatuming  

Science Journals Connector (OSTI)

......application of the redatuming process to 3-D data acquired by conventional...to formulate the redatuming process in terms of a data mapping problem...integral expression describing the process. Only a 2-D integral needs...Geophys., 74th Ann. Internat. Mtg., pp. 2024-2027. Alkhalifah......

S. Tegtmeier-Last; A. Gisolf; D. J. Verschuur

2008-02-01T23:59:59.000Z

309

Considerations for Targets in 3D Pointing Experiments  

E-Print Network (OSTI)

Pointing at three-dimensional objects to select them is a fundamental task in 3D user interfaces' law [2] and the ISO 9241-9 standard [6]. The ISO standard contributes the measure of throughput, which 9241-9 ACM Classification Keywords H.5.2. User Interfaces: Evaluation/methodology. Introduction

St眉rzlinger, Wolfgang

310

Shape Reconstruction of 3D Bilaterally Symmetric Surfaces  

Science Journals Connector (OSTI)

The paper presents a new approach for shape recovery based on integrating geometric and photometric information. We consider 3D bilaterally symmetric objects, that is, objects which are symmetric with respect to a plane (e.g., faces), and their reconstruction ... Keywords: bilaterally symmetric objects, shape recovery, shape-from-shading, stereo

Ilan Shimshoni; Yael Moses; Michael Lindenbaum

2000-09-01T23:59:59.000Z

311

Studies of the 3D surface roughness height  

SciTech Connect

Nowadays nano-coatings occupy more and more significant place in technology. Innovative, functional coatings acquire new aspects from the point of view of modern technologies, considering the aggregate of physical properties that can be achieved manipulating in the production process with the properties of coatings surfaces on micro- and nano-level. Nano-coatings are applied on machine parts, friction surfaces, contacting parts, corrosion surfaces, transparent conducting films (TCF), etc. The equipment available at present for the production of transparent conducting oxide (TCO) coatings with highest quality is based on expensive indium tin oxide (ITO) material; therefore cheaper alternatives are being searched for. One such offered alternative is zink oxide (ZnO) nano-coatings. Evaluating the TCF physical and mechanical properties and in view of the new ISO standard (EN ISO 25178) on the introduction of surface texture (3D surface roughness) in the engineering calculations, it is necessary to examine the height of 3D surface roughness, which is one of the most significant roughness parameters. The given paper studies the average values of 3D surface roughness height and the most often applied distribution laws are as follows: the normal distribution and Rayleigh distribution. The 3D surface is simulated by a normal random field.

Avisane, Anita; Rudzitis, Janis; Kumermanis, Maris [Institute of Mechanical Engineering, Riga Technical University, Ezermalas str. 6k, Riga (Latvia)

2013-12-16T23:59:59.000Z

312

Liver vasculature refinement with multiple 3D structuring element shapes  

Science Journals Connector (OSTI)

Delineating anatomical structures and other regions of interest is an important component of assisting and automating specific diagnostic, radiological, and surgical tasks. In this paper, a segmentation approach for liver region delineation is proposed, ... Keywords: 3D structuring element, Hysteresis thresholding, Mathematical morphology, Region growing, Texture analysis, Vessel tree refinement

Do-Yeon Kim

2014-08-01T23:59:59.000Z

313

Electromagnetic Waves Propagation in 3D Plasma Configurations  

E-Print Network (OSTI)

Electromagnetic Waves Propagation in 3D Plasma Configurations Pavel Popovich, W. Anthony Cooper such method is based on heating the plasma by electromagnetic waves with various frequencies. Wave behaviour that allows to simulate mode-conversion effects. The wave equation is formulated in terms of electromagnetic

314

3D Tomography from Few Projections in Experimental Fluid Dynamics  

E-Print Network (OSTI)

3D Tomography from Few Projections in Experimental Fluid Dynamics Stefania Petra, Andreas Schr projections due to both limited optical access to wind and water tunnels and cost S. Petra, C. Schn projection data. The latter are the pixel entries in the recorded 2D images that represent the integration

Schn枚rr, Christoph

315

Propagation Beam Consideration for 3D THz Computed Tomography  

E-Print Network (OSTI)

Propagation Beam Consideration for 3D THz Computed Tomography B. Recur, 1, J.P. Guillet, 2 I. Manek, "Refraction losses in terahertz computed tomography," Opt. Commun. 283, 2050颅2055 (2010). 8. S. Nadar, H, "Accelerated image reconstruction using ordered subsets of projection data," IEEE Trans. Med. Imaging 13, 601

Boyer, Edmond

316

Manual 3D Lattice-Boltzmann Parallel code Author: Mike Sukop, Danny Thorne and Haibo Huang  

E-Print Network (OSTI)

Manual 颅 3D Lattice-Boltzmann Parallel code Author: Mike Sukop, Danny Thorne and Haibo Huang Manual 颅 3D Lattice-Boltzmann Parallel code

Sukop, Mike

317

3D Printing for Rapid Manufacturing: Study of Dimensional and Geometrical Accuracy  

Science Journals Connector (OSTI)

3D printing (3DP) is one of the innovative ... an important role in educating product design and 3D modeling because it helps students/designer to...

Hirpa G. Lemu; Safet Kurtovic

2012-01-01T23:59:59.000Z

318

Supplemental Document: Interface Techniques for 3D Control of Spatial Keyframing  

E-Print Network (OSTI)

Supplemental Document: Interface Techniques for 3D Control of Spatial Keyframing Igor Mordatch. Figure 4: Two photographs of character poses created interactively using our 3D tracking interface

Toronto, University of

319

An Algorithm for Computing Customized 3D Printed Implants with Curvature Constrained Channels for Enhancing  

E-Print Network (OSTI)

An Algorithm for Computing Customized 3D Printed Implants with Curvature Constrained Channels results in 3D printing and steerable needle motion planning to create customized implants containing

North Carolina at Chapel Hill, University of

320

Impact of 3D printing on global supply chains by 2020 .  

E-Print Network (OSTI)

??This thesis aims to quantitatively estimate the potential impact of 3D Printing on global supply chains. Industrial adoption of 3D Printing has been increasing gradually (more)

Bodla, Muhammad Raheel

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

E-Print Network 3.0 - absorbed dose 3d Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

unit absorbed dose. Conclusions Polymer gel dosimetry offers a method of acquiring 3D... -dimensional (3D) dose measurements can be produced by position- ing lm in multiple...

322

Photo 3D-Printer, Image Credit, Ames Lab | OSTI, US Dept of Energy...  

Office of Scientific and Technical Information (OSTI)

Photo 3D-Printer, Image Credit, Ames Lab Critical Materials Institute speed metals research with 3D printer. Default Caption and Credits Read More: Critical Materials Institute...

323

Explanatory Lifelike Avatars: Performing User-Centered Tasks in 3D Learning Environments  

E-Print Network (OSTI)

environment, a 3D learning environment for the domain of computer architecture and systems for novices, WHIZLOW, who inhabits the CPU CITY 3D learning envir

Zettlemoyer, Luke

324

XEDS STEM Tomography For 3D Chemical CharacterizationOf Nanoscale...  

NLE Websites -- All DOE Office Websites (Extended Search)

XEDS STEM Tomography For 3D Chemical CharacterizationOf Nanoscale Particles. XEDS STEM Tomography For 3D Chemical CharacterizationOf Nanoscale Particles. Abstract: We present a...

325

Merging BIM and GIS using ontologies application to urban facility management in \\{ACTIVe3D\\}  

Science Journals Connector (OSTI)

Abstract This article presents the research work done in order to reduce the gap of heterogeneity between Geographic Information System and Building Information Models. The goal is to extend a platform dedicated to facility management called ACTIVe3D. We want to enlarge its scope to take into account the management of urban elements contained in the building environment, as well as other buildings. The particularity of the platform is that data can be accessed either by a semantic view or through a 3D interface. The SIGA3D project describes a set of processes that aims, for all the stakeholders of urban projects, to manage pieces of information through all the lifecycle of construction projects. To solve the heterogeneity problem between BIM and GIS, we developed a semantic extension to the BIM called UIM (Urban Information Modeling). This extension defines spatial, temporal and multi-representation concepts to build an extensible ontology. The knowledge database can be populated with information coming from standards like IFC and CityGML. This information system has been adapted and implemented into the existing platform and is today fully operational and used by thousands of users.

Clement Mignard; Christophe Nicolle

2014-01-01T23:59:59.000Z

326

The Pacific Ocean抯 Acidification Laboratory  

Science Journals Connector (OSTI)

The Pacific Ocean抯 Acidification Laboratory ... Five years ago, at the quadrennial International Coral Reef Symposium in Okinawa, Japan, a poll of the scientists and resource managers present ranked ocean acidification 38th out of a list of 39 possible threats facing reefs, recalls Rusty Brainard, head of the National Oceanic and Atmospheric Administration抯 (NOAA抯) Coral Reef Ecosystem Division. ... As the oceans absorb CO2 from the atmosphere at the rate of one million tons per hour, the pH of the water is changing. ...

Christopher Pala

2009-08-05T23:59:59.000Z

327

The M3D-C1 Approach to Simulating 3D 2-fluid Magnetohydrodynamics in Magnetic Fusion Experiments  

SciTech Connect

A new approach for solving the 3D MHD equations in a strongly magnetized toroidal plasma is presented which uses high-order 2D finite elements with C1 continuity. The vector fields use a physics-based decomposition. An efficient implicit time advance separates the velocity and field advance. ITAPS (SCOREC) adaptivity software and TOPS solvers are used.

S. C. Jardin, N. Ferraro, X. Luo, J. Chen, J. Breslau, K.E. Jansen, and M. S. Shephard

2008-06-24T23:59:59.000Z

328

Data:Dd3d94ec-da90-4fa2-a3d7-4067bc17041b | Open Energy Information  

Open Energy Info (EERE)

d94ec-da90-4fa2-a3d7-4067bc17041b d94ec-da90-4fa2-a3d7-4067bc17041b No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Village of Cadott, Wisconsin (Utility Company) Effective date: 2000/10/19 End date if known: Rate name: Ms-2 Security Lighting Service(Metered) Sector: Lighting Description: Application: This schedule will be applied to security lighting. This schedule reflects the installation of either 175-Watt Mercury Vapor or 100-Watt High Pressure Sodium lamps that operate on an all night every-night schedule. The utility will furnish, install, and maintain lighting units. This rate schedule reflects the cost of lighting units installed on utility-owned distribution poles. If the utility must install a dedicated pole solely for providing the customer with the security light, then the customer must pay for the cost of the pole plus the cost of installing the pole. Fixed Monthly Charge includes Commitment to Community Rider: $1.33 per customer per month.

329

Design, simulation, fabrication, and preliminary tests of 3D CMS pixel detectors for the super-LHC  

SciTech Connect

The Super-LHC upgrade puts strong demands on the radiation hardness of the innermost tracking detectors of the CMS, which cannot be fulfilled with any conventional planar detector design. The so-called 3D detector architectures, which feature columnar electrodes passing through the substrate thickness, are under investigation as a potential solution for the closest operation points to the beams, where the radiation fluence is estimated to reach 10{sup 16} n{sub eq}/cm{sup 2}. Two different 3D detector designs with CMS pixel readout electronics are being developed and evaluated for their advantages and drawbacks. The fabrication of full-3D active edge CMS pixel devices with p-type substrate has been successfully completed at SINTEF. In this paper, we study the expected post-irradiation behaviors of these devices with simulations and, after a brief description of their fabrication, we report the first leakage current measurement results as performed on wafer.

Koybasi, Ozhan; /Purdue U.; Bortoletto, Daniela; /Purdue U.; Hansen, Thor-Erik; /SINTEF, Oslo; Kok, Angela; /SINTEF, Oslo; Hansen, Trond Andreas; /SINTEF, Oslo; Lietaer, Nicolas; /SINTEF, Oslo; Jensen, Geir Uri; /SINTEF, Oslo; Summanwar, Anand; /SINTEF, Oslo; Bolla, Gino; /Purdue U.; Kwan, Simon Wing Lok; /Fermilab

2010-01-01T23:59:59.000Z

330

3-D MAPPING TECHNOLOGIES FOR HIGH LEVEL WASTE TANKS  

SciTech Connect

This research investigated four techniques that could be applicable for mapping of solids remaining in radioactive waste tanks at the Savannah River Site: stereo vision, LIDAR, flash LIDAR, and Structure from Motion (SfM). Stereo vision is the least appropriate technique for the solids mapping application. Although the equipment cost is low and repackaging would be fairly simple, the algorithms to create a 3D image from stereo vision would require significant further development and may not even be applicable since stereo vision works by finding disparity in feature point locations from the images taken by the cameras. When minimal variation in visual texture exists for an area of interest, it becomes difficult for the software to detect correspondences for that object. SfM appears to be appropriate for solids mapping in waste tanks. However, equipment development would be required for positioning and movement of the camera in the tank space to enable capturing a sequence of images of the scene. Since SfM requires the identification of distinctive features and associates those features to their corresponding instantiations in the other image frames, mockup testing would be required to determine the applicability of SfM technology for mapping of waste in tanks. There may be too few features to track between image frame sequences to employ the SfM technology since uniform appearance may exist when viewing the remaining solids in the interior of the waste tanks. Although scanning LIDAR appears to be an adequate solution, the expense of the equipment ($80,000-$120,000) and the need for further development to allow tank deployment may prohibit utilizing this technology. The development would include repackaging of equipment to permit deployment through the 4-inch access ports and to keep the equipment relatively uncontaminated to allow use in additional tanks. 3D flash LIDAR has a number of advantages over stereo vision, scanning LIDAR, and SfM, including full frame time-of-flight data (3D image) collected with a single laser pulse, high frame rates, direct calculation of range, blur-free images without motion distortion, no need for precision scanning mechanisms, ability to combine 3D flash LIDAR with 2D cameras for 2D texture over 3D depth, and no moving parts. The major disadvantage of the 3D flash LIDAR camera is the cost of approximately $150,000, not including the software development time and repackaging of the camera for deployment in the waste tanks.

Marzolf, A.; Folsom, M.

2010-08-31T23:59:59.000Z

331

Automated 3D trabecular bone structure analysis of the proximal femur梡rediction of biomechanical strength by CT and DXA  

E-Print Network (OSTI)

z ORIGINAL ARTICLE Automated 3D trabecular bone structureIntroduction An automated 3D segmentation algorithm wasstudy was to use an automated 3D segmentation algorithm to

2010-01-01T23:59:59.000Z

332

3D Mt Resistivity Imaging For Geothermal Resource Assessment And  

Open Energy Info (EERE)

Resistivity Imaging For Geothermal Resource Assessment And Resistivity Imaging For Geothermal Resource Assessment And Environmental Mitigation At The Glass Mountain Kgra, California Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Paper: 3D Mt Resistivity Imaging For Geothermal Resource Assessment And Environmental Mitigation At The Glass Mountain Kgra, California Details Activities (3) Areas (2) Regions (0) Abstract: MT and TDEM surveys acquired in 2005 were integrated with existing MT and TDEM data recovered from obsolete formats to characterize the geometry of the geothermal reservoir. An interpretation based on the correlation of the 3D MT resistivity with well properties indicated that most of the previous exploration wells had been tarted close to but not in the center of areas tha appeared most likely to be permeable. Such

333

3D MAGNETOTELLURIC CHARACTERIZATION OF THE COSO GEOTHERMAL FIELD | Open  

Open Energy Info (EERE)

CHARACTERIZATION OF THE COSO GEOTHERMAL FIELD CHARACTERIZATION OF THE COSO GEOTHERMAL FIELD Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Proceedings: 3D Magnetotelluric characterization of the COSO Geothermal Field Details Activities (0) Areas (0) Regions (0) Abstract: Knowledge of the subsurface electrical resistivity/conductivity can contribute to a better understanding of complex hydrothermal systems, typified by Coso geothermal field, through mapping the geometry (bounds and controlling structures) over existing production. Three-dimensional magnetotelluric (MT) inversion is now an emerging technology for characterizing the resistivity structures of complex geothermal systems. The method appears to hold great promise, but histories exploiting truly 3D inversion that demonstrate the advantages that can be gained by acquiring

334

2D-3D transition of gold cluster anions resolved  

Science Journals Connector (OSTI)

Small gold cluster anions Aun? are known for their unusual two-dimensional (2D) structures, giving rise to properties very different from those of bulk gold. Previous experiments and calculations disagree about the number of gold atoms nc where the transition to 3D structures occurs. We combine trapped ion electron diffraction and state of the art electronic structure calculations to resolve this puzzle and establish nc=12. It is shown that theoretical studies using traditional generalized gradient functionals are heavily biased towards 2D structures. For a correct prediction of the 2D-3D crossover point it is crucial to use density functionals yielding accurate jellium surface energies, such as the Tao-Perdew-Staroverov-Scuseria (TPSS) functional or the Perdew-Burke-Ernzerhof functional modified for solids (PBEsol). Further, spin-orbit effects have to be included, and large, flexible basis sets employed. This combined theoretical-experimental approach is promising for larger gold and other metal clusters.

Mikael P. Johansson; Anne Lechtken; Detlef Schooss; Manfred M. Kappes; Filipp Furche

2008-05-19T23:59:59.000Z

335

D3-D7 inflationary model and M theory  

Science Journals Connector (OSTI)

A proposal is made for a cosmological D3-D7 model with a constant magnetic flux along the D7 world volume. It describes an N=2 gauge model with Fayet-Iliopoulos terms and the potential of the hybrid P-term inflation. The motion of the D3-brane towards D7 in a phase with spontaneously broken supersymmetry provides a period of slow-roll inflation in the de Sitter valley, the role of the inflaton being played by the distance between D3- and D7-branes. After tachyon condensation a supersymmetric ground state is formed: a D3-D7 bound state corresponding to an Abelian non-linear (non-commutative) instanton. In this model the existence of a non-vanishing cosmological constant is associated with the resolution of the instanton singularity. We discuss a possible embedding of this model into a compactified M-theory setup.

Keshav Dasgupta; Carlos Herdeiro; Shinji Hirano; Renata Kallosh

2002-05-23T23:59:59.000Z

336

Widespread 3D seismic survey covers mature field in Gabon  

SciTech Connect

The exploration potential of the Port Gentil region, characterized by some of the earliest petroleum discoveries in Gabon, continues to be of important interest today. Available seismic data are of an older vintage (1974--82), recorded with low common mid-point (CMP) fold. They are critically void of coverage through the transition zone. The geology is highly complex, characterized by salt structures and strong tectonic activity. An intensive joint exploration and reservoir definition campaign is crucial to full evaluation of this area. This article describes the 3D survey conducted during 1992 and early 1993 over a mature oil field in an around Port Gentil and incorporating elements of land, transition zone, and shallow marine data acquisition -- the 3D Mandji program.

Riley, D.; Fleming, M. (Western Geophysical, Houston, TX (United States)); Delvaux, J. (Elf Gabon, Port Gentil (Gabon))

1993-12-06T23:59:59.000Z

337

Multicomponent 3-D characterization of a coalbed methane reservoir  

SciTech Connect

Methane is produced from fractured coalbed reservoirs at Cedar Hill Field in the San Juan Basin. Fracturing and local stress are critical to production because of the absence of matrix permeability in the coals. Knowledge of the direction of open fractures, the degree of fracturing, reservoir pressure, and compartmentalization is required to understand the flow of fluids through the reservoir. A multicomponent 3-D seismic survey was acquired to aid in coalbed methane reservoir characterization. Coalbed reservoir heterogeneities, including isolated pressure cells, zones of increased fracture density, and variable fracture directions, have been interpreted through the analysis of the multicomponent data and integration with petrophysical and reservoir engineering studies. Strike-slip faults, which compartmentalize the reservoir, have been identified by structural interpretation of the 3-D P-wave seismic data. These faults form boundaries for pressure cells that have been identified by P-wave reflection amplitude anomalies.

Shuck, E.L. [Advance Geophysical Corp., Englewood, CO (United States)] [Advance Geophysical Corp., Englewood, CO (United States); Davis, T.L.; Benson, R.D. [Colorado School of Mines, Golden, CO (United States). Geophysics Dept.] [Colorado School of Mines, Golden, CO (United States). Geophysics Dept.

1996-03-01T23:59:59.000Z

338

Sculplexity: Sculptures of Complexity using 3D printing  

E-Print Network (OSTI)

We show how to convert models of complex systems such as 2D cellular automata into a 3D printed object. Our method takes into account the limitations inherent to 3D printing processes and materials. Our approach automates the greater part of this task, bypassing the use of CAD software and the need for manual design. As a proof of concept, a physical object representing a modified forest fire model was successfully printed. Automated conversion methods similar to the ones developed here can be used to create objects for research, for demonstration and teaching, for outreach, or simply for aesthetic pleasure. As our outputs can be touched, they may be particularly useful for those with visual disabilities.

Reiss, D S; Evans, T S

2014-01-01T23:59:59.000Z

339

Sculplexity: Sculptures of Complexity using 3D printing  

Science Journals Connector (OSTI)

We show how to convert models of complex systems such as 2D cellular automata into a 3D printed object. Our method takes into account the limitations inherent to 3D printing processes and materials. Our approach automates the greater part of this task, bypassing the use of CAD software and the need for manual design. As a proof of concept, a physical object representing a modified forest fire model was successfully printed. Automated conversion methods similar to the ones developed here can be used to create objects for research, for demonstration and teaching, for outreach, or simply for aesthetic pleasure. As our outputs can be touched, they may be particularly useful for those with visual disabilities.

D. S. Reiss; J. J. Price; T. S. Evans

2013-01-01T23:59:59.000Z

340

Electric field in 3D gravity with torsion  

E-Print Network (OSTI)

It is shown that in static and spherically symmetric configurations of the system of Maxwell field coupled to 3D gravity with torsion, at least one of the Maxwell field components has to vanish. Restricting our attention to the electric sector of the theory, we find an interesting exact solution, corresponding to the azimuthal electric field. Its geometric structure is to a large extent influenced by the values of two different central charges, associated to the asymptotic AdS structure of spacetime.

M. Blagojevi?; B. Cvetkovi?

2008-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Development of a physical 3D anthropomorphic breast phantom  

SciTech Connect

Purpose: Develop a technique to fabricate a 3D anthropomorphic breast phantom with known ground truth for image quality assessment of 2D and 3D breast x-ray imaging systems. Methods: The phantom design is based on an existing computer model that can generate breast voxel phantoms of varying composition, size, and shape. The physical phantom is produced in two steps. First, the portion of the voxel phantom consisting of the glandular tissue, skin, and Cooper's ligaments is separated into sections. These sections are then fabricated by high-resolution rapid prototyping using a single material with 50% glandular equivalence. The remaining adipose compartments are then filled using an epoxy-based resin (EBR) with 100% adipose equivalence. The phantom sections are stacked to form the physical anthropomorphic phantom. Results: The authors fabricated a prototype phantom corresponding to a 450 ml breast with 45% dense tissue, deformed to a 5 cm compressed thickness. Both the rapid prototype (RP) and EBR phantom materials are radiographically uniform. The coefficient of variation (CoV) of the relative attenuation between RP and EBR phantom samples was <1% and the CoV of the signal intensity within RP and EBR phantom samples was <1.5% on average. Digital mammography and reconstructed digital breast tomosynthesis images of the authors' phantom were reviewed by two radiologists; they reported that the images are similar in appearance to clinical images, noting there are still artifacts from air bubbles in the EBR. Conclusions: The authors have developed a technique to produce 3D anthropomorphic breast phantoms with known ground truth, yielding highly realistic x-ray images. Such phantoms may serve both qualitative and quantitative performance assessments for 2D and 3D breast x-ray imaging systems.

Carton, Ann-Katherine; Bakic, Predrag; Ullberg, Christer; Derand, Helen; Maidment, Andrew D. A. [Department of Radiology, University of Pennsylvania, 1 Silverstein Building, 3400 Spruce Street, Philadelphia, Pennsylvania 19104-4206 (United States); XCounter AB, Svaerdvaegen 11, SE-182 33 Danderyd (Sweden); Department of Radiology, University of Pennsylvania, 1 Silverstein Building, 3400 Spruce Street, Philadelphia, Pennsylvania 19104-4206 (United States)

2011-02-15T23:59:59.000Z

342

3D acoustic imaging applied to the Baikal Neutrino Telescope  

E-Print Network (OSTI)

A hydro-acoustic imaging system was tested in a pilot study on distant localization of elements of the Baikal underwater neutrino telescope. For this innovative approach, based on broad band acoustic echo signals and strictly avoiding any active acoustic elements on the telescope, the imaging system was temporarily installed just below the ice surface, while the telescope stayed in its standard position at 1100 m depth. The system comprised an antenna with four acoustic projectors positioned at the corners of a 50 meter square; acoustic pulses were "linear sweep-spread signals" - multiple-modulated wide-band signals (10-22 kHz) of 51.2 s duration. Three large objects (two string buoys and the central electronics module) were localized by the 3D acoustic imaging, with a accuracy of ~0.2 m (along the beam) and ~1.0 m (transverse). We discuss signal forms and parameters necessary for improved 3D acoustic imaging of the telescope, and suggest a layout of a possible stationary bottom based 3D imaging setup. The presented technique may be of interest for neutrino telescopes of km3-scale and beyond, as a flexible temporary or as a stationary tool to localize basic telescope elements, while these are completely passive.

K. G. Kebkal; R. Bannasch; O. G. Kebkal; A. I. Panfilov; R. Wischnewski

2008-11-07T23:59:59.000Z

343

Single molecule microscopy in 3D cell cultures and tissues  

Science Journals Connector (OSTI)

Abstract From the onset of the first microscopic visualization of single fluorescent molecules in living cells at the beginning of this century, to the present, almost routine application of single molecule microscopy, the method has well-proven its ability to contribute unmatched detailed insight into the heterogeneous and dynamic molecular world life is composed of. Except for investigations on bacteria and yeast, almost the entire story of success is based on studies on adherent mammalian 2D cell cultures. However, despite this continuous progress, the technique was not able to keep pace with the move of the cell biology community to adapt 3D cell culture models for basic research, regenerative medicine, or drug development and screening. In this review, we will summarize the progress, which only recently allowed for the application of single molecule microscopy to 3D cell systems and give an overview of the technical advances that led to it. While initially posing a challenge, we finally conclude that relevant 3D cell models will become an integral part of the on-going success of single molecule microscopy.

Florian M. Lauer; Elke Kaemmerer; Tobias Meckel

2014-01-01T23:59:59.000Z

344

On Enhancing Power Benefits in 3D ICs: Block Folding and Bonding Styles Perspective  

Science Journals Connector (OSTI)

Low power is widely considered as a key benefit of 3D ICs, yet there have been few thorough design studies on how to maximize power benefits in 3D ICs. In this paper, we present design methodologies to reduce power consumption in 3D ICs using a large-scale ... Keywords: 3D IC, block folding, bonding style, power benefit

Moongon Jung, Taigon Song, Yang Wan, Yarui Peng, Sung Kyu Lim

2014-06-01T23:59:59.000Z

345

Metrological analysis of a procedure for the automatic 3D modeling of dental plaster casts  

E-Print Network (OSTI)

Metrological analysis of a procedure for the automatic 3D modeling of dental plaster casts Nicola to an automatic procedure recently proposed for the 3D modeling of dental plaster casts. This contribution derives of an automatic 3D modeling procedure recently proposed and it shows the accuracy of 3D modeling dental plaster

Abu-Mostafa, Yaser S.

346

From Low-Cost Depth Sensors to CAD: Cross-Domain 3D Shape Retrieval via  

E-Print Network (OSTI)

applications for 3D shape retrieval, such as high-quality 3D scanning, manipulation and printing. NoteFrom Low-Cost Depth Sensors to CAD: Cross-Domain 3D Shape Retrieval via Regression Tree Fields Yan@us.ibm.com Abstract. The recent advances of low-cost and mobile depth sensors dramatically extend the potential of 3D

Chang, Shih-Fu

347

3D MODEL RETRIEVAL BASED ON DEPTH LINE DESCRIPTOR Mohamed Chaouch and Anne Verroust-Blondet  

E-Print Network (OSTI)

3D MODEL RETRIEVAL BASED ON DEPTH LINE DESCRIPTOR Mohamed Chaouch and Anne Verroust-Blondet INRIA.verroust}@inria.fr. ABSTRACT In this paper, we propose a novel 2D/3D approach for 3D model matching and retrieving. Each model information provides a more accurate description of 3D shape boundaries than using other 2D shape descriptors

Paris-Sud XI, Universit茅 de

348

3D Graph Visualization with the Oculus Rift Virtual Graph Reality  

E-Print Network (OSTI)

3D Graph Visualization with the Oculus Rift Virtual Graph Reality Farshad Barahimi, Stephen Wismath regarding three- dimensional (3D) representations of graphs. However, the actual usefulness of such 3D reality environment such as a CAVE, or 路 printed as a physical model with a 3D printer. Early studies

Wismath, Stephen

349

Learning 3D Object Templates by Hierarchical Quantization of Geometry and Appearance Spaces  

E-Print Network (OSTI)

Learning 3D Object Templates by Hierarchical Quantization of Geometry and Appearance Spaces Wenze for learning 3D object tem- plates from view labeled object images. The 3D template is defined in a joint-sampled discrete space. Using information gain as a criterion, the best 3D template can be searched through the AND

Zhu, Song Chun

350

3D Haptic Modeling System using Ungrounded Pen-shaped Kinesthetic Display  

E-Print Network (OSTI)

3D Haptic Modeling System using Ungrounded Pen-shaped Kinesthetic Display Sho Kamuro 1) Kouta-dimensional (3D) haptic modeling system that enables a user to create 3D models as though he/she is drawing and intuitively create various 3D shapes by drawing closed curves in air using the device. The created shapes

Tachi, Susumu

351

3D Engineered Models for Highway Construction Gabe Nelson, P.E.  

E-Print Network (OSTI)

3D Engineered Models for Highway Construction Gabe Nelson, P.E. Snyder & Associates, Inc. Overview of 3D Engineered Models for Highway Construction Module 1 Introduction #12;3D Engineered Models & Quality 颅 Protect the Environment 路 Every Day Counts 2 included 3D Engineered Models for Construction

352

3D tomodosimetry using long scintillating fibers: A feasibility study  

SciTech Connect

Purpose: 3D dosimetry is recognized as an ideal for patient-specific quality assurance (QA) of highly conformal radiotherapy treatments. However, existing 3D dosimeters are not straightforward to implement in the clinic, as their read-out procedure is often tedious and their accuracy, precision, and/or sample size exhibit limitations. The purpose of this work is to develop a 3D dosimeter based on the concept of tomodosimetry inside concentric cylindrical planes using long scintillating fibers for the QA of modern radiotherapy techniques such as intensity-modulated radiation therapy (IMRT) or intensity-modulated arc therapy (IMAT).Methods: Using a model-based simulation, scintillating fibers were modeled on three concentric cylindrical planes of radii 2.5, 5.0, and 7.5 cm, inside a 10 cm radius water-equivalent cylinder phantom. The phantom was set to rotate around its central axis, made parallel to the linac gantry axis of rotation. Light acquisitions were simulated using the calculated dose from the treatment planning software and reconstructed in each cylindrical plane at a resolution of 1 mm{sup 2} using a total-variation minimization iterative reconstruction algorithm. The 3D dose was then interpolated from the reconstructed cylindrical plane doses at a resolution of 1 mm{sup 3}. Different scintillating fiber patterns were compared by varying the angle of each fiber in its cylindrical plane and introducing a light-tight cut in each fiber. The precision of the reconstructed cylindrical dose distribution was evaluated using a Poisson modeling of the acquired light signals and the accuracy of the interpolated 3D dose was evaluated using an IMRT clinical plan for a prostate case.Results: Straight scintillating fiber patterns with light-tight cuts were the most accurate in cylindrical dose reconstruction, showing less than 0.5 mm distance-to-agreement in dose gradients and a mean local dose difference of less than 0.2% in the high dose region for a 10 10 cm{sup 2} field. The precision attained with this fiber configuration was less than 0.9% in the high dose, low gradient region of an IMRT segment for light acquisitions of 0.1 MU over a 360 degree rotation of the cylinder phantom. 3D dose interpolation for the IMRT clinical plan yielded an overall dose difference with the reference input of less than 1%, except in high dose gradients.Conclusions: Using long scintillating fibers inside rotating, concentric cylindrical planes, the authors demonstrate that their tomodosimetry method has the potential for high resolution, precise, and accurate 3D dosimetry. Moreover, because of its water-equivalence and rotational symmetry, this design should find interesting application for both treatment QA and machine commissioning.

Goulet, Mathieu; Archambault, Louis; Beaulieu, Luc; Gingras, Luc [D閜artement de Physique, de G閚ie Physique et d扥ptique et Centre de Recherche sur le cancer, Universit Laval, Qu閎ec, Qu閎ec G1V 0A6, Canada, and D閜artement de Radio-Oncologie and CRCHU de Quebec, CHU de Qu閎ec, 11 C魌e du Palais, Qu閎ec, Qu閎ec G1R 2J6 (Canada)] [D閜artement de Physique, de G閚ie Physique et d扥ptique et Centre de Recherche sur le cancer, Universit Laval, Qu閎ec, Qu閎ec G1V 0A6, Canada, and D閜artement de Radio-Oncologie and CRCHU de Quebec, CHU de Qu閎ec, 11 C魌e du Palais, Qu閎ec, Qu閎ec G1R 2J6 (Canada)

2013-10-15T23:59:59.000Z

353

The simulation of 3D microcalcification clusters in 2D digital mammography and breast tomosynthesis  

SciTech Connect

Purpose: This work proposes a new method of building 3D models of microcalcification clusters and describes the validation of their realistic appearance when simulated into 2D digital mammograms and into breast tomosynthesis images. Methods: A micro-CT unit was used to scan 23 breast biopsy specimens of microcalcification clusters with malignant and benign characteristics and their 3D reconstructed datasets were segmented to obtain 3D models of microcalcification clusters. These models were then adjusted for the x-ray spectrum used and for the system resolution and simulated into 2D projection images to obtain mammograms after image processing and into tomographic sequences of projection images, which were then reconstructed to form 3D tomosynthesis datasets. Six radiologists were asked to distinguish between 40 real and 40 simulated clusters of microcalcifications in two separate studies on 2D mammography and tomosynthesis datasets. Receiver operating characteristic (ROC) analysis was used to test the ability of each observer to distinguish between simulated and real microcalcification clusters. The kappa statistic was applied to assess how often the individual simulated and real microcalcification clusters had received similar scores (''agreement'') on their realistic appearance in both modalities. This analysis was performed for all readers and for the real and the simulated group of microcalcification clusters separately. ''Poor'' agreement would reflect radiologists' confusion between simulated and real clusters, i.e., lesions not systematically evaluated in both modalities as either simulated or real, and would therefore be interpreted as a success of the present models. Results: The area under the ROC curve, averaged over the observers, was 0.55 (95% confidence interval [0.44, 0.66]) for the 2D study, and 0.46 (95% confidence interval [0.29, 0.64]) for the tomosynthesis study, indicating no statistically significant difference between real and simulated lesions (p > 0.05). Agreement between allocated lesion scores for 2D mammography and those for the tomosynthesis series was poor. Conclusions: The realistic appearance of the 3D models of microcalcification clusters, whether malignant or benign clusters, was confirmed for 2D digital mammography images and the breast tomosynthesis datasets; this database of clusters is suitable for use in future observer performance studies related to the detectability of microcalcification clusters. Such studies include comparing 2D digital mammography to breast tomosynthesis and comparing different reconstruction algorithms.

Shaheen, Eman; Van Ongeval, Chantal; Zanca, Federica; Cockmartin, Lesley; Marshall, Nicholas; Jacobs, Jurgen; Young, Kenneth C.; Dance, David R.; Bosmans, Hilde [Department of Radiology, University Hospitals Leuven, Herestraat 49, 3000 Leuven (Belgium); National Coordinating Centre for the Physics of Mammography, Royal Surrey County Hospital, Guildford, GU2 7XX (United Kingdom); Department of Radiology, University Hospitals Leuven, Herestraat 49, 3000 Leuven (Belgium)

2011-12-15T23:59:59.000Z

354

Sound Absorption in the Pacific Ocean  

Science Journals Connector (OSTI)

The absorption of sound in the Pacific Ocean at a nominal frequency of 75 kHz was measured over a horizontal path at depths of 910 and 3350 m. The results are 20.01.5 dB/km and 13.51.5 dB/km respectively which may be compared to values of 27.3 dB/km and 22.7 dB/km extrapolated from the empirical relation of Schulkin and Marsh. Evidently the useful range of this relation is severely limited. In addition the effect of pressure may be greater than previously suspected.

H. F. Bezdek

1972-01-01T23:59:59.000Z

355

TOWARDSAUTOMATICMODELING OF 3D CULTURAL HERITAGE M. Andreetto, R. Bemardini, G.M. Cortelazzo,L. Lucchese  

E-Print Network (OSTI)

by means of the "3D printing" devices used in mechanical rapid prototyping. Another one is that 3D objects

Abu-Mostafa, Yaser S.

356

3-D HYDRODYNAMIC MODELING IN A GEOSPATIAL FRAMEWORK  

SciTech Connect

3-D hydrodynamic models are used by the Savannah River National Laboratory (SRNL) to simulate the transport of thermal and radionuclide discharges in coastal estuary systems. Development of such models requires accurate bathymetry, coastline, and boundary condition data in conjunction with the ability to rapidly discretize model domains and interpolate the required geospatial data onto the domain. To facilitate rapid and accurate hydrodynamic model development, SRNL has developed a pre- and post-processor application in a geospatial framework to automate the creation of models using existing data. This automated capability allows development of very detailed models to maximize exploitation of available surface water radionuclide sample data and thermal imagery.

Bollinger, J; Alfred Garrett, A; Larry Koffman, L; David Hayes, D

2006-08-24T23:59:59.000Z

357

Nuclear Dynamics with the Sky3D code  

E-Print Network (OSTI)

A description is presented of how to use the Sky3D time-dependent Hartree-Fock code to calculate giant monopole resonances. This requires modification to the code, and a step-by-step guide of how to make the necessary modification is given. An example of how to analyse the output of the code to obtain quantities of physics interest is included. Together, the modifications and the post-processing are intended to serve as a typical example of how the code, which was designed to be extendable to particular users' needs, can be extended.

Stevenson, P D

2014-01-01T23:59:59.000Z

358

Virtual reality 3D headset based on DMD light modulators  

SciTech Connect

We present the design of an immersion-type 3D headset suitable for virtual reality applications based upon digital micro-mirror devices (DMD). Our approach leverages silicon micro mirrors offering 720p resolution displays in a small form-factor. Supporting chip sets allow rapid integration of these devices into wearable displays with high resolution and low power consumption. Applications include night driving, piloting of UAVs, fusion of multiple sensors for pilots, training, vision diagnostics and consumer gaming. Our design is described in which light from the DMD is imaged to infinity and the user抯 own eye lens forms a real image on the user抯 retina.

Bernacki, Bruce E.; Evans, Allan; Tang, Edward

2014-06-13T23:59:59.000Z

359

Vehicle Technologies Office: 3-D Animation Shows Complex Geometry of Diesel  

NLE Websites -- All DOE Office Websites (Extended Search)

3-D Animation Shows 3-D Animation Shows Complex Geometry of Diesel Particulates to someone by E-mail Share Vehicle Technologies Office: 3-D Animation Shows Complex Geometry of Diesel Particulates on Facebook Tweet about Vehicle Technologies Office: 3-D Animation Shows Complex Geometry of Diesel Particulates on Twitter Bookmark Vehicle Technologies Office: 3-D Animation Shows Complex Geometry of Diesel Particulates on Google Bookmark Vehicle Technologies Office: 3-D Animation Shows Complex Geometry of Diesel Particulates on Delicious Rank Vehicle Technologies Office: 3-D Animation Shows Complex Geometry of Diesel Particulates on Digg Find More places to share Vehicle Technologies Office: 3-D Animation Shows Complex Geometry of Diesel Particulates on AddThis.com... 3-D Animation Shows Complex Geometry of Diesel Particulates

360

MO-A-9A-01: Innovation in Medical Physics Practice: 3D Printing Applications  

Science Journals Connector (OSTI)

3D printing also called additive manufacturing has great potential to advance the field of medicine. Many medical uses have been exhibited from facial reconstruction to the repair of pulmonary obstructions. The strength of 3D printing is to quickly convert a 3D computer model into a physical object. Medical use of 3D models is already ubiquitous with technologies such as computed tomography and magnetic resonance imaging. Thus tailoring 3D printing technology to medical functions has the potential to impact patient care. This session will discuss applications to the field of Medical Physics. Topics discussed will include introduction to 3D printing methods as well as examples of real-world uses of 3D printing spanning clinical and research practice in diagnostic imaging and radiation therapy. The session will also compare 3D printing to other manufacturing processes and discuss a variety of uses of 3D printing technology outside the field of Medical Physics.

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Causes of ocean currents  

Science Journals Connector (OSTI)

In the foregoing analysis of the ocean and the atmosphere as two interacting subsystems, we have identified two major energy inputs into the ocean. These are the wind stress over the sea surface and heat fluxe...

David Tolmazin

1985-01-01T23:59:59.000Z

362

3-D physical modeling of a complex salt canopy  

SciTech Connect

Recent drilling has confirmed both significant reservoir potential and the presence of commercial hydrocarbons below salt structures in the Gulf of Mexico. Obtaining definitive seismic images with standard processing schemes beneath these salt structures is very difficult if not impossible. Because of the complicated seismic behavior of these structures, full volume 3-D prestack depth migration is required. Unfortunately, carrying out the multitude of calculations needed to create a proper image requires the largest and fastest supercomputers and rather complex numerical algorithms. Furthermore, developing and testing the imaging algorithms is quite involved and requires appropriate test data sets. To better understand the problems and issues of subsalt imaging, Marathon Oil Company and Louisiana Land and Exploration Company contracted with the University of Houston`s Allied Geophysical Laboratories (AGL) to construct a salt canopy physical model. The model is patterned after the SEG/EAEG Salt Model and is made from synthetic materials. It is a full three-dimensional model with an irregularly shaped, lateral salt structure embedded in five distinct sedimentary layers. The model was used to acquire a multi-offset 3-D marine-style survey. These data are being used to address problems of subsalt imaging. In addition to standard processing techniques, the authors investigate algorithms for multiple removal and prestack depth migration.

Wiley, R.W. [Marathon Oil Co., Littleton, CO (United States); Sekharan, K.K. [Univ. of Houston, TX (United States). Allied Geophysical Labs.

1996-12-31T23:59:59.000Z

363

Desktop 3D printing of controlled release pharmaceutical bilayer tablets  

Science Journals Connector (OSTI)

Abstract Three dimensional (3D) printing was used as a novel medicine formulation technique for production of viable tablets capable of satisfying regulatory tests and matching the release of standard commercial tablets. Hydroxypropyl methylcellulose (HPMC 2208) (Methocel K100M Premium) and poly(acrylic acid) (PAA) (Carbopol 974P NF) were used as a hydrophilic matrix for a sustained release (SR) layer. Hypromellose (HPMC 2910) was used as a binder while microcrystalline cellulose (MCC) (Pharmacel 102) and sodium starch glycolate (SSG) (Primojel) were used as disintegrants for an immediate release (IR) layer. Commercial guaifenesin bi-layer tablets (GBT) were used as a model drug (Mucinex) for this study. There was a favourable comparison of release of the active guaifenesin from the printed hydrophilic matrix compared with the commercially available GBT. The printed formulations were also evaluated for physical and mechanical properties such as weight variation, friability, hardness and thickness as a comparison to the commercial tablet and were within acceptable range as defined by the international standards stated in the United States Pharmacopoeia (USP). All formulations (standard tablets and 3D printed tablets) showed Korsmeyer-Peppas n values between 0.27 and 0.44 which indicates Fickian diffusion drug release through a hydrated HPMC gel layer.

Shaban A. Khaled; Jonathan C. Burley; Morgan R. Alexander; Clive J. Roberts

2014-01-01T23:59:59.000Z

364

Realizacao domestica e escolar de foto e video 3D  

E-Print Network (OSTI)

English: Industry does not give attention to the small domestic or professional market of digital technologies for 3D images. What was done on the XX century by using photographic film is not know available to the common people, though the facilities are even better. Some technique developed in Brasil twenty years ago and the use of conventional domestic photo or video cameras allows fot making pictures and films at home by using digital conversions for editing, and two-color goggles. The anaglyphic technique, the same NASA employs to show Mars images to the public, is not employed in Brazil yet. We must analize the reasons for that. Portugues: A industria nao tem dado atencao ao mercado domestico ou profissional de pequena escala nas novas tecnologias digitais para imagem 3D. O que foi feito ao longo do seculo XX usando filme fotografico nao esta hoje ao alcance das pessoas, sendo que a facilidade de uso e muito maior. Tecnicas desenvolvidas no Brasil ha mais de vinte anos, e o uso de simples cameras convencionais de fotografia e video permitem realizar fotos e filmes caseiros por meio de conversoes digitais na edicao e o uso de oculos bicolor. A tecnica anagifica, a mesma que a NASA usa para mostrar ao publico as imagens de Marte, por exemplo, nao teve espaco no Brasil ainda. Devemos analisar os motivos que podem estar influenciando e os caminhos para mudar isso.

Jose J. Lunazzi

2012-12-19T23:59:59.000Z

365

KAM theory and the 3D Euler equation  

E-Print Network (OSTI)

We prove that the dynamical system defined by the hydrodynamical Euler equation on any closed Riemannian 3-manifold $M$ is not mixing in the $C^k$ topology ($k > 4$ and non-integer) for any prescribed value of helicity and sufficiently large values of energy. This can be regarded as a 3D version of Nadirashvili's and Shnirelman's theorems showing the existence of wandering solutions for the 2D Euler equation. Moreover, we obtain an obstruction for the mixing under the Euler flow of $C^k$-neighborhoods of divergence-free vectorfields on $M$. On the way we construct a family of functionals on the space of divergence-free $C^1$ vectorfields on the manifold, which are integrals of motion of the 3D Euler equation. Given a vectorfield these functionals measure the part of the manifold foliated by ergodic invariant tori of fixed isotopy types. We use the KAM theory to establish some continuity properties of these functionals in the $C^k$-topology. This allows one to get a lower bound for the $C^k$-distance between a divergence-free vectorfield (in particular, a steady solution) and a trajectory of the Euler flow.

Boris Khesin; Sergei Kuksin; Daniel Peralta-Salas

2014-01-21T23:59:59.000Z

366

CHARACTERIZING DANGEROUS WAVES FOR OCEAN WAVE ENERGY CONVERTER SURVIVABILITY Justin Hovland  

E-Print Network (OSTI)

CHARACTERIZING DANGEROUS WAVES FOR OCEAN WAVE ENERGY CONVERTER SURVIVABILITY Justin Hovland ABSTRACT Ocean Wave Energy Converters (OWECs) operating on the water surface are subject to storms at station 139. Keywords: wave energy, survivability, breaking waves, joint distribution, OWEC INTRODUCTION

Haller, Merrick

367

3D Computational Fluid Dynamics Simulation of Natural Coke Steam Gasification in General and Improved Fluidized Beds  

Science Journals Connector (OSTI)

The thermal characteristics of natural coke steam gasification in a fluidized bed were three-dimensionally (3D) simulated based on the computational fluid dynamics (CFD) method using Fluent code. ... However, this technology seems difficult to carry out due to its abradability, hard ignition, hot burst, and so on. ... In short, all the results in this work have a significance to provide the theoretical basis for the design, operational optimization, and scale-up of the natural coke steam gasification process. ...

Ya-li Tang; Dai-jun Liu; Yu-hong Liu; Qian Luo

2010-09-30T23:59:59.000Z

368

ocean | OpenEI  

Open Energy Info (EERE)

ocean ocean Dataset Summary Description This shapefile represents the seasonal winter depth profile to reach water at a temperature of 20潞C. Source NREL Date Released October 28th, 2012 (2 years ago) Date Updated Unknown Keywords depth profile hydrokinetic ocean ocean energy ocean thermal energy conversion OTEC seawater cooling thermal Data application/zip icon OTEC Seawater Cooling 20潞C Depth Profile - Winter Average (zip, 1.1 MiB) Quality Metrics Level of Review Peer Reviewed Comment Temporal and Spatial Coverage Frequency Time Period March 2009 - February 2011 License License Other or unspecified, see optional comment below Comment This GIS data was developed by the National Renewable Energy Laboratory ("NREL"), which is operated by the Alliance for Sustainable Energy, LLC for the U.S. Department of Energy ("DOE"). The user is granted the right, without any fee or cost, to use, copy, modify, alter, enhance and distribute this data for any purpose whatsoever, provided that this entire notice appears in all copies of the data. Further, the user of this data agrees to credit NREL in any publications or software that incorporate or use the data. Access to and use of the GIS data shall further impose the following obligations on the User. The names DOE/NREL may not be used in any advertising or publicity to endorse or promote any product or commercial entity using or incorporating the GIS data unless specific written authorization is obtained from DOE/NREL. The User also understands that DOE/NREL shall not be obligated to provide updates, support, consulting, training or assistance of any kind whatsoever with regard to the use of the GIS data. THE GIS DATA IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL DOE/NREL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO CLAIMS ASSOCIATED WITH THE LOSS OF DATA OR PROFITS, WHICH MAY RESULT FROM AN ACTION IN CONTRACT, NEGLIGENCE OR OTHER TORTIOUS CLAIM THAT ARISES OUT OF OR IN CONNECTION WITH THE ACCESS OR USE OF THE GIS DATA. The User acknowledges that access to the GIS data is subject to U.S. Export laws and regulations and any use or transfer of the GIS data must be authorized under those regulations. The User shall not use, distribute, transfer, or transmit GIS data or any products incorporating the GIS data except in compliance with U.S. export regulations. If requested by DOE/NREL, the User agrees to sign written assurances and other export-related documentation as may be required to comply with U.S. export regulations.

369

A decoupled approach for NOx朜2O 3-D CFD modeling in CFB plants  

Science Journals Connector (OSTI)

Abstract In this study, a 3D CFD model for the formation of \\{NOx\\} and N2O in a lignite fired 1.2燤Wth CFB pilot plant is developed. The decoupled approach (decoupled from combustion simulation) is tested for the minimization of computational cost. As combustion simulation is prerequired, this was achieved through a simplified 3-D CFD combustion model. The developed model is then applied to the pilot-scale 1.2燤Wth CFB plant and validated against experimental data. As concerns the NOx朜2O model, an extensive literature review is also carried out for the incorporation of the appropriate reactions network and respective reaction rates expressions. Results show that homogenous reactions are favoured on the lower section of the bed, due to the abundance of fuel devolatilization products. On the other hand, on the upper section, heterogeneous reactions govern nitric oxide formation/reduction. It is found that for the lignite examined in this work, HCN is released in negligible amounts during char combustion. The proposed and validated CFD model for \\{NOx\\} and N2O, is capable of examining the effect of different operational parameters and coal properties on the overall nitric oxides emissions from a CFB combustor, with low computational cost and without the additional expenses for pilot-scale experiments.

A. Nikolopoulos; I. Malgarinos; N. Nikolopoulos; P. Grammelis; S. Karrelas; E. Kakaras

2014-01-01T23:59:59.000Z

370

3D Global Estimation and Augmented Reality Visualization of Intra-operative X-ray Dose  

Science Journals Connector (OSTI)

The growing use of image-guided minimally-invasive surgical procedures is confronting clinicians and surgical staff with new radiation exposure risks from X-ray imaging devices. The accurate estimation of intr...

Nicolas Loy Rodas; Nicolas Padoy

2014-01-01T23:59:59.000Z

371

Ocean | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Ocean Ocean Ocean Data Tools Technical Guide Map Gallery Regional Planning Feedback Ocean Welcome to our COMMUNITY This is the National Ocean Council's portal for data, information, and decision tools to support people engaged in regional marine planning for the future use of the ocean, our coasts, and the Great Lakes. Our goal is to enhance discovery of and access to data and information for planners, stakeholders, and the public. Please visit our Feedback page to tell us what would make the site most useful to you as we expand our content. Start Here! Previous Pause Next PacIOOS - Pacific Islands Voyager PacIOOS - Pacific Islands Voyager View More West Coast Governors Alliance - Regional Data Framework West Coast Governors Alliance - Regional Data Framework View More Mid-Atlantic Ocean Data Portal

372

Minimizing Test Time through Test FlowOptimization in 3D-SICs.  

E-Print Network (OSTI)

?? 3D stacked ICs (3D-SICs) with multiple dies interconnected by through-silicon-vias(TSVs) are considered as a technology driver and proven to have overwhelming advantagesover traditional ICs (more)

DASH, ASSMITRA

2013-01-01T23:59:59.000Z

373

Tubular Enhanced Geodesic Active Contours for Continuum Robot Detection using 3D Ultrasound  

E-Print Network (OSTI)

Tubular Enhanced Geodesic Active Contours for Continuum Robot Detection using 3D Ultrasound continuum robots in 3D ultrasound images. The proposed approach combines geodesic active contours Enhanced Geodesic Active Contours (TEGAC), is demonstrated through ex vivo intracardiac experiments

Dupont, Pierre

374

Geometric modeling and optimization in 3D solar cells : implementation and algorithms  

E-Print Network (OSTI)

Conversion of solar energy in three-dimensional (3D) devices has been essentially untapped. In this thesis, I design and implement a C++ program that models and optimizes a 3D solar cell ensemble embedded in a given ...

Wan, Jin Hao, M. Eng. Massachusetts Institute of Technology

2014-01-01T23:59:59.000Z

375

Harnessing AutoCAD Civil 3D 2011, 1st edition  

Science Journals Connector (OSTI)

HARNESSING AUTOCAD CIVIL 3D 2011, introduces readers to Autodesk? Civil 3D 2011, the very latest release of this software. Strategically developed exercises printed within the book are supported by over 600 pages of online text emphasizing industry best ...

Phillip J. Zimmerman

2010-10-01T23:59:59.000Z

376

High-resolution 3-D refractive index imaging and Its biological applications  

E-Print Network (OSTI)

This thesis presents a theory of 3-D imaging in partially coherent light under a non-paraxial condition. The transmission cross-coefficient (TCC) has been used to characterize partially coherent imaging in a 2- D and 3-D ...

Sung, Yongjin

2011-01-01T23:59:59.000Z

377

Developing a 3D colour image reproduction system for additive manufacturing of facial prostheses  

Science Journals Connector (OSTI)

In this study, a new 3D colour image reproduction system is proposed for the automated and accurate additive manufacturing of soft tissue facial prostheses. A framework ... show that the protocol used in the 3D manufacturing

Kaida Xiao; Faraedon Zardawi

2014-02-01T23:59:59.000Z

378

Generation of Energy Efficient Trajectories for NIMS3D, a Three-Dimensional Cabled Robot  

E-Print Network (OSTI)

are ideal for many tasks, such as handling of hazardous materials and disaster search and rescue efforts [2 - NIMS3D. Fig. 1 shows a schematic diagram of NIMS3D. The system is comprised of three components: 1

Sukhatme, Gaurav S.

379

Efficient Generation of Video Hologram Using Spatio-Temporal Redundant Data of 3-D Video  

Science Journals Connector (OSTI)

In this paper, a new method for efficient generation of video hologram for 3-D video is proposed by combined use of redundant data of 3-D video and look-up table techniques.

Kim, Seung-Cheol; Kim, Eun-Soo

380

Design and analysis of a concrete modular housing system constructed with 3D panels  

E-Print Network (OSTI)

An innovative modular house system design utilizing an alternative concrete residential building system called 3D panels is presented along with an overview of 3D panels as well as relevant methods and markets. The proposed ...

Sarcia, Sam Rhea, 1982-

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

A qualitative security analysis of a new class of 3-d integrated crypto co-processors  

Science Journals Connector (OSTI)

3-D integration presents many new opportunities for architects and embedded systems designers. However, 3-D integration has not yet been explored by the cryptographic hardware community. Traditionally, crypto co-processors have been implemented as a ...

Jonathan Valamehr; Ted Huffmire; Cynthia Irvine; Ryan Kastner; $#199;etin Kaya Ko$#231;; Timothy Levin; Timothy Sherwood

2012-01-01T23:59:59.000Z

382

Programmers Manual for the PVM Coupling Interface in RELAP5-3D  

SciTech Connect

This report describes the implementation of the PVM API in the RELAP5-3D computer code. The information in the report is intended for programmers wanting to correct or extend RELAP5-3D.

Walter L Weaver III

2005-03-01T23:59:59.000Z

383

Impact of 3D printing on global supply chains by 2020  

E-Print Network (OSTI)

This thesis aims to quantitatively estimate the potential impact of 3D Printing on global supply chains. Industrial adoption of 3D Printing has been increasing gradually from prototyping to manufacturing of low volume ...

Bhasin, Varun

2014-01-01T23:59:59.000Z

384

3-D Printed Electrically and Optically Paced Skeletal Muscle Based Biological Machines Caroline Cvetkovic, Bioengineering  

E-Print Network (OSTI)

3-D Printed Electrically and Optically Paced Skeletal Muscle Based Biological Machines Caroline Research Aims and Goals 路 To use 3D printing technologies to fabricate the structure of the biological

Kilian, Kristopher A.

385

ARM's efforts to address the need for 3D cloud and precipitation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Pavlos Kollias ARM's efforts to address the need for 3D cloud and precipitation measurements ARM will get into 3D measurements, stop explaining why The ARRA arrived at the doorstep...

386

E-Print Network 3.0 - automatic 3d reconstruction Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

3d reconstruction Search Powered by Explorit Topic List Advanced Search Sample search results for: automatic 3d reconstruction Page: << < 1 2 3 4 5 > >> 1 Int.Workshop on...

387

Efficient 3D building model generation from 2D floor plans  

E-Print Network (OSTI)

3D building models are beneficial to architects, interior designers, and ordinary people in visualizing indoor space in three dimensions. 3D building models appear to be more aesthetic to ordinary people than architectural ...

Kashlev, Dmitry

2008-01-01T23:59:59.000Z

388

Towards a unified treatment of 3D display using partially coherent light  

E-Print Network (OSTI)

This thesis develops a novel method of decomposing a 3D phase space description of light into multiple partially coherent modes, and applies this decomposition to the creation of a more flexible 3D display format. Any type ...

Horstmeyer, Roarke (Roarke William)

2011-01-01T23:59:59.000Z

389

Application Of 3D Inversion To Magnetotelluric Data In The Ogiri...  

Open Energy Info (EERE)

Of 3D Inversion To Magnetotelluric Data In The Ogiri Geothermal Area, Japan Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Application Of 3D...

390

"Flying Through the Known Universe" Screens at 3D Film Festival...  

NLE Websites -- All DOE Office Websites (Extended Search)

3D movie flight through hundreds of thousands of galaxies at considerably faster than the speed of light has its world-premiere screening at the 3D Film Festival in Los Angeles....

391

Method to Remedy Image Degradations Due to Facet Braiding in 3D Integral-Imaging Monitors  

Science Journals Connector (OSTI)

One of the main challenges in 3D integral imaging (InI) is to overcome the limited depth of field of displayed 3D images. Although this limitation can ...

Navarro, H閏tor; Mart韓ez-Cuenca, Ra鷏; Molina-Mart韓, Ainhoa; Mart韓ez-Corral, Manuel; Saavedra, Genaro; Javidi, Bahram

2010-01-01T23:59:59.000Z

392

3D Magnetotelluric Characterization Of The Geothermal Anomaly In The  

Open Energy Info (EERE)

Magnetotelluric Characterization Of The Geothermal Anomaly In The Magnetotelluric Characterization Of The Geothermal Anomaly In The Llucmajor Aquifer System (Majorca, Spain) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: 3D Magnetotelluric Characterization Of The Geothermal Anomaly In The Llucmajor Aquifer System (Majorca, Spain) Details Activities (0) Areas (0) Regions (0) Abstract: In the Llucmajor aquifer system (Majorca Island, Spain) some geothermal evidences have appeared. This phenomenon is not isolated to Majorca and it is present in other areas, where it can be associated with structural conditions, especially to the extensional event suffered by the island after the Alpine Orogeny. However, the origin of this anomaly in Llucmajor is not well known, and there is no surface geological evidence of

393

Automating the determination of 3D protein structure  

SciTech Connect

The creation of an automated method for determining 3D protein structure would be invaluable to the field of biology and presents an interesting challenge to computer science. Unfortunately, given the current level of protein knowledge, a completely automated solution method is not yet feasible, therefore, our group has decided to integrate existing databases and theories to create a software system that assists X-ray crystallographers in specifying a particular protein structure. By breaking the problem of determining overall protein structure into small subproblems, we hope to come closer to solving a novel structure by solving each component. By generating necessary information for structure determination, this method provides the first step toward designing a program to determine protein conformation automatically.

Rayl, K.D.

1993-12-31T23:59:59.000Z

394

3D deformation field throughout the interior of materials.  

SciTech Connect

This report contains the one-year feasibility study for our three-year LDRD proposal that is aimed to develop an experimental technique to measure the 3D deformation fields inside a material body. In this feasibility study, we first apply Digital Volume Correlation (DVC) algorithm to pre-existing in-situ Xray Computed Tomography (XCT) image sets with pure rigid body translation. The calculated displacement field has very large random errors and low precision that are unacceptable. Then we enhance these tomography images by setting threshold of the intensity of each slice. DVC algorithm is able to obtain accurate deformation fields from these enhanced image sets and the deformation fields are consistent with the global mechanical loading that is applied to the specimen. Through this study, we prove that the internal markers inside the pre-existing tomography images of aluminum alloy can be enhanced and are suitable for DVC to calculate the deformation field throughout the material body.

Jin, Huiqing; Lu, Wei-Yang

2013-09-01T23:59:59.000Z

395

3D Model of the San Emidio Geothermal Area  

DOE Data Explorer (OSTI)

The San Emidio geothermal system is characterized by a left-step in a west-dipping normal fault system that bounds the western side of the Lake Range. The 3D geologic model consists of 5 geologic units and 55 faults. Overlying Jurrassic-Triassic metasedimentary basement is a ~500 m-1000 m thick section of the Miocene lower Pyramid sequence, pre- syn-extensional Quaternary sedimentary rocks and post-extensional Quaternary rocks. 15-30 eastward dip of the stratigraphy is controlled by the predominant west-dipping fault set. Both geothermal production and injection are concentrated north of the step over in an area of closely spaced west dipping normal faults.

James E. Faulds

396

3D Model of the San Emidio Geothermal Area  

SciTech Connect

The San Emidio geothermal system is characterized by a left-step in a west-dipping normal fault system that bounds the western side of the Lake Range. The 3D geologic model consists of 5 geologic units and 55 faults. Overlying Jurrassic-Triassic metasedimentary basement is a ~500 m-1000 m thick section of the Miocene lower Pyramid sequence, pre- syn-extensional Quaternary sedimentary rocks and post-extensional Quaternary rocks. 15-30 eastward dip of the stratigraphy is controlled by the predominant west-dipping fault set. Both geothermal production and injection are concentrated north of the step over in an area of closely spaced west dipping normal faults.

James E. Faulds

2013-12-31T23:59:59.000Z

397

3D Model of the Neal Hot Springs Geothermal Area  

SciTech Connect

The Neal Hot Springs geothermal system lies in a left-step in a north-striking, west-dipping normal fault system, consisting of the Neal Fault to the south and the Sugarloaf Butte Fault to the north (Edwards, 2013). The Neal Hot Springs 3D geologic model consists of 104 faults and 13 stratigraphic units. The stratigraphy is sub-horizontal to dipping <10 degrees and there is no predominant dip-direction. Geothermal production is exclusively from the Neal Fault south of, and within the step-over, while geothermal injection is into both the Neal Fault to the south of the step-over and faults within the step-over.

Faulds, James E.

2013-12-31T23:59:59.000Z

398

3D Model of the Neal Hot Springs Geothermal Area  

DOE Data Explorer (OSTI)

The Neal Hot Springs geothermal system lies in a left-step in a north-striking, west-dipping normal fault system, consisting of the Neal Fault to the south and the Sugarloaf Butte Fault to the north (Edwards, 2013). The Neal Hot Springs 3D geologic model consists of 104 faults and 13 stratigraphic units. The stratigraphy is sub-horizontal to dipping <10 degrees and there is no predominant dip-direction. Geothermal production is exclusively from the Neal Fault south of, and within the step-over, while geothermal injection is into both the Neal Fault to the south of the step-over and faults within the step-over.

Faulds, James E.

399

3-D Seismic Methods For Geothermal Reservoir Exploration And  

Open Energy Info (EERE)

Methods For Geothermal Reservoir Exploration And Methods For Geothermal Reservoir Exploration And Assessment-Summary Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Report: 3-D Seismic Methods For Geothermal Reservoir Exploration And Assessment-Summary Details Activities (5) Areas (1) Regions (0) Abstract: A wide variety of seismic methods covering the spectrum from DC to kilohertz have been employed at one time or the other in geothermal environments. The reasons have varied from exploration for a heat source to attempting to find individual fractures producing hot fluids. For the purposes here we will assume that overall objective of seismic imaging is for siting wells for successful location of permeable pathways (often fracture permeability) that are controlling flow and transport in naturally

400

3D Magnetotelluic characterization of the Coso Geothermal Field | Open  

Open Energy Info (EERE)

Magnetotelluic characterization of the Coso Geothermal Field Magnetotelluic characterization of the Coso Geothermal Field Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: 3D Magnetotelluic characterization of the Coso Geothermal Field Details Activities (1) Areas (1) Regions (0) Abstract: Electrical resistivity may contribute to progress in understanding geothermal systems by imaging the geometry, bounds and controlling structures in existing production, and thereby perhaps suggesting new areas for field expansion. To these ends, a dense grid of magnetotelluric (MT) stations plus a single line of contiguous bipole array profiling has been acquired over the east flank of the Coso geothermal system. Acquiring good quality MT data in producing geothermal systems is a challenge due to production related electromagnetic (EM) noise and, in the

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Painting-to-3D Model Alignment Via Discriminative Visual Elements  

E-Print Network (OSTI)

] as well as simplified models obtained from 3D mod- eling tools such as Google Sketchup. Example results

Paris-Sud XI, Universit茅 de

402

Final report: high resolution lensless 3D imaging of nanostructures with coherent x-rays  

SciTech Connect

Final report on the project "High resolution lensless 3D imaging of nanostructures with coherent x-rays"

Jacobsen, Chris

2014-12-07T23:59:59.000Z

403

3D Printed Molecules and Extended Solid Models for Teaching Symmetry and Point Groups  

Science Journals Connector (OSTI)

There are several full-color 3D printers available that can print multiple colors within one object. ... In contrast to the fragile color printing molecular model attempts, models printed on the Stratasys Dimension Elite 3D printer reported in this article using the ABS P430 model material and P400SR dissolvable support material consistently produced structures with excellent mechanical integrity. ... Both file preparation methods produced successful 3D prints of equal quality using a Stratasys Dimension Elite 3D printer. ...

Vincent F. Scalfani; Thomas P. Vaid

2014-04-18T23:59:59.000Z

404

CAD for 3D Circuits: Solutions and Challenges Sachin S. Sapatnekar  

E-Print Network (OSTI)

, it is essential to develop compuer-aided design techniques that are 3D- specific. This paper discusses problems

Sapatnekar, Sachin

405

3D Printing Phosphonium Ionic Liquid Networks with Mask Projection Microstereolithography  

Science Journals Connector (OSTI)

3D Printing Phosphonium Ionic Liquid Networks with Mask Projection Microstereolithography ... Additive manufacturing, often referred to as 3D printing, where objects are constructed in a layer-by-layer fashion, enables the design and creation of geometrically complex objects with tailored topology, and thus, functionality. ... Herein, we report photopolymerization strategies coupled with additive manufacturing to achieve 3D printed phosphonium PILs in order to demonstrate the first example of 3D printing of an ion-conducting polymer. ...

Alison R. Schultz; Philip M. Lambert; Nicholas A. Chartrain; David M. Ruohoniemi; Zhiyang Zhang; Chainika Jangu; Musan Zhang; Christopher B. Williams; Timothy E. Long

2014-11-06T23:59:59.000Z

406

A User Study Comparing 3D Modeling with Silhouettes and Google SketchUp  

E-Print Network (OSTI)

We describe a user study comparing 3D Modeling with Silhouettes and Google SketchUp. In the user study, ten users were asked to create 3D models of three different objects, using either 3D Modeling with Silhouettes or ...

Igarashi, Takeo

2010-05-05T23:59:59.000Z

407

Recovery of 3D Solar Magnetic Field Model Parameter Using Image Structure Matching  

Science Journals Connector (OSTI)

An approach to recover a 3D solar magnetic field model parameter using intensity images of the Sun's corona is introduced. The approach is a quantitative approach in which the 3D model parameter is determined via an image structure matching scheme. The ... Keywords: 3D Parameter Recovery, Image-based Modeling, Structure Matching

Jong Kwan Lee; G. Allen Gary

2009-05-01T23:59:59.000Z

408

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION 1 A Rigorous and Efficient Analysis of 3D Printed  

E-Print Network (OSTI)

IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION 1 A Rigorous and Efficient Analysis of 3D Printed of structures with multiple vertical strips running in multilayer environment. Index Terms-- Multilayered 3D is developed to accurately simulate 3D structures in multilayer environment [1], and to simultaneously simulate

Aksun, M. Irsadi

409

Department of Mechanical Engineering Spring 2013 3D Printed Medical Device  

E-Print Network (OSTI)

PENNSTATE Department of Mechanical Engineering Spring 2013 3D Printed Medical Device Overview This project aimed to develop a 3D-printed everting structure for use in conjunction with current endosurgical/concept and that our main form of manufacturing revolved around 3D-printing, which allowed us to quickly make

Demirel, Melik C.

410

Production of 3D Structures in Printing Veronika Chovancova*, Alexandra Pekarovicova* and Paul D. Fleming III*  

E-Print Network (OSTI)

Production of 3D Structures in Printing Veronika Chovancova*, Alexandra Pekarovicova* and Paul D from our laboratory show a modified formula of hot melt ink that can be used in 3D thermal wax printing. Fleming III* Keywords: 3D Structure, Hot Melt, Blowing Agents, Calorimetry Abstract The ability to form

Fleming, Paul D. "Dan"

411

COREGISTRATION OF DSM AND 3D POINT CLOUDS ACQUIRED BY A MOBILE MAPPING SYSTEM  

E-Print Network (OSTI)

COREGISTRATION OF DSM AND 3D POINT CLOUDS ACQUIRED BY A MOBILE MAPPING SYSTEM Corregistro do DSM e Clouds; DSM. 1. INTRODUCTION The production of realistic 3D map databases is a matter of increasing (DSM) obtained by correlation between aerial images with 20x20 cm horizontal resolution. (Right) Lara3D

Paris-Sud XI, Universit茅 de

412

Customization and 3D printing: a challenging playground for software product lines  

Science Journals Connector (OSTI)

3D printing is gaining more and more momentum to build customized product in a wide variety of fields. We conduct an exploratory study of Thingiverse, the most popular Website for sharing user-created 3D design files, in order to establish a possible ... Keywords: 3D printing, customization, software product lines

Mathieu Acher, Benoit Baudry, Olivier Barais, Jean-Marc J閦閝uel

2014-09-01T23:59:59.000Z

413

Charge Collection Measurements in single-type column 3D Sensors  

E-Print Network (OSTI)

Charge Collection Measurements in single-type column 3D Sensors M. Scaringella*, A. Polyakov, and H sensors. In particular, 3D detectors with columns of both n-and p-doping are considered to be especially-substrate [5]. The principle of the single-type column 3D sensors is shown in Fig. 1. Their advantages over

California at Santa Cruz, University of

414

A 2D/3D Hybrid Geographical Information System Stephen Brooks*  

E-Print Network (OSTI)

the exploration, presentation and manipulation of geographical data. 3D maps can be used by GIS specialists is a 3D marine GIS that supports real-time input and texture mapped imagery using a simple viewpoint Abstract We present a unique Geographical Information System (GIS) that seamlessly integrates 2D and 3D

Brooks, Stephen

415

ROBOPuppet: Low-Cost, 3D Printed Miniatures for Teleoperating Full-Size Robots  

E-Print Network (OSTI)

ROBOPuppet: Low-Cost, 3D Printed Miniatures for Teleoperating Full-Size Robots Anna Eilering of the robot links, which are then 3D printed and assembled. This procedure is generalizable to variety to target robot. smaller scale suitable for desktop use. The puppet is a 3D- printed miniature of the target

Hauser, Kris

416

Planning Locally Optimal, Curvature-Constrained Trajectories in 3D using Sequential Convex Optimization  

E-Print Network (OSTI)

, bevel-tip medical needles, planning curvature-constrained channels in 3D printed implants for targeted for perturbations. Our ap- proach can also be used for designing optimized channel layouts within 3D printed is the design of multiple bounded curvature channels in intracavitary 3D printed im- plants through which

Abbeel, Pieter

417

A Series of Tubes: Adding Interactivity to 3D Prints Using Internal Pipes  

E-Print Network (OSTI)

A Series of Tubes: Adding Interactivity to 3D Prints Using Internal Pipes Valkyrie Savage valkyrie flexibility and potential. Author Keywords Fabrication; 3D Printing; Interactive Objects; Design Tools ACM. Recently, human-computer interaction researchers have be- gun to explore adding interaction to 3D printed

Zakhor, Avideh

418

Custom 3D-Printed Rollers for Frieze Pattern Cookies Robert Hanson  

E-Print Network (OSTI)

Custom 3D-Printed Rollers for Frieze Pattern Cookies Robert Hanson Towson University, Emeritus a method for converting images of repeating patterns, e.g., Roman friezes or Escher tessellations, into 3D-printed the world of mathematics and the art of cooking. Fractal cookies based on stretching and folding [1] and 3D-printed

419

Planning Curvature and Torsion Constrained Ribbons in 3D with Application to Intracavitary Brachytherapy  

E-Print Network (OSTI)

multiple smooth channels through a 3D printed structure for a healthcare applica- tion and is relevant 3D printed implants to temporarily insert high-dose radioactive sources to reach and cover tumors] demonstrated that 3D printing can be used to design customized implants that conform to the patient anatomy

Abbeel, Pieter

420

Manipulating complex network structures in virtual reality and 3D printing of the results  

E-Print Network (OSTI)

Manipulating complex network structures in virtual reality and 3D printing of the results Alberto the results at any time for direct 3D printing. 1. INTRODUCTION Although its first appearance on the market can be tracked up to three decades ago, stereolithography (also known as 3D printing) has become

Verschure, Paul

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Bridging the Gap: Automated Steady Scaffoldings for 3D Printing Jrmie Dumas  

E-Print Network (OSTI)

Bridging the Gap: Automated Steady Scaffoldings for 3D Printing J锟絩锟絤ie Dumas Universit锟 de Figure 1: The upper leg of the Poppy robot (www.poppy-project.org) cannot be 3D printed on low cost FDM usage. Abstract Fused Filament Fabrication (FFF) is the process of 3D printing ob- jects from melted

L茅vy, Bruno

422

Customization and 3D Printing: A Challenging Playground for Software Product Lines  

E-Print Network (OSTI)

Customization and 3D Printing: A Challenging Playground for Software Product Lines Mathieu Acher firstname.lastname@irisa.fr ABSTRACT 3D printing is gaining more and more momentum to build customized. We provide hints that SPL-alike techniques are practically used in 3D printing and thus relevant

Boyer, Edmond

423

3D User Interfaces: New Directions and New Perspectives Doug A. Bowman*  

E-Print Network (OSTI)

1 3D User Interfaces: New Directions and New Perspectives Doug A. Bowman* , Sabine Coquillart ABSTRACT Three-dimensional user interfaces (3D UIs) allow users to interact with virtual objects, environments, or information using direct 3D input in the physical and/or virtual space. With the advent

St眉rzlinger, Wolfgang

424

Efficient 3D shape matching and retrieval using a concrete radialized spherical projection representation  

E-Print Network (OSTI)

Efficient 3D shape matching and retrieval using a concrete radialized spherical projection We present a 3D shape retrieval methodology based on the theory of spherical harmonics. Using PCA on the face normals of the model. The 3D model is decomposed into a set of spherical functions

Paris-Sud XI, Universit茅 de

425

3D-mesh models: view-based indexing and structural analysis  

E-Print Network (OSTI)

3D-mesh models: view-based indexing and structural analysis Mohamed Daoudi, Tarik Filali Ansary.daoudi@lifl.fr, tarik.filali@lifl.fr, julien.tierny@lifl.fr, jean-philippe.vandeborre@lifl.fr Abstract. 3D-mesh models applications, medical or military simulations, video games and so on. Indexing and analyzing these 3D data

Paris-Sud XI, Universit茅 de

426

3D Interactive Room Organizer Eranda De Alwis and Baihua Li  

E-Print Network (OSTI)

3D Interactive Room Organizer Eranda De Alwis and Baihua Li Department of Computing and Mathematics in position. To resolve the problem, we present the prototype implementation of a web-based 3D interactive to interact with furniture and other elements in the room, and arrange them properly in 3D world. The user can

Li, Baihua

427

3D Downtown Phoenix Modeling This project is to develop the efficient and effective method for  

E-Print Network (OSTI)

3D Downtown Phoenix Modeling ABSTRACT This project is to develop the efficient and effective method for creating 3D city models that will be used with GIS (Geographical Information Systems) data in VR (Virtual Reality) environment. Here introduces the modeling process to create 3D city model from aerial photos

Hall, Sharon J.

428

3D VIDEO QUALITY EVALUATION WITH DEPTH QUALITY VARIATIONS Gustavo Leon, Hari Kalva, and Borko Furht  

E-Print Network (OSTI)

3D VIDEO QUALITY EVALUATION WITH DEPTH QUALITY VARIATIONS Gustavo Leon, Hari Kalva, and Borko Furht on 3D video perception on autostereoscopic displays. This study was done using objective as well image quality and compression on the perceived 3D experience. Another objective is to evaluate the use

Kalva, Hari

429

3D Human Video Retrieval: from Pose to Motion Matching R. Slama1,2  

E-Print Network (OSTI)

3D Human Video Retrieval: from Pose to Motion Matching R. Slama1,2 , H. Wannous1,2 and M. Daoudi2, France Abstract 3D video retrieval is a challenging problem lying at the heart of many primary research areas in computer graph- ics and computer vision applications. In this paper, we present a new 3D human

Paris-Sud XI, Universit茅 de

430

3D CONTENT-BASED RETRIEVAL IN ARTWORK DATABASES David Gorisse(1)  

E-Print Network (OSTI)

3D CONTENT-BASED RETRIEVAL IN ARTWORK DATABASES David Gorisse(1) , Matthieu Cord(2) , Michel Jordan, France ABSTRACT In this paper, we present first results obtained in the frame of the EROS-3D project, which aims at dealing with a collection of artwork 3D models, i.e. visualize them, classify them

Paris-Sud XI, Universit茅 de

431

3D/4D MODELLING, VISUALIZATION AND INFORMATION FRAMEWORKS: CURRENT U.S. GEOLOGICAL SURVEY PRACTICE  

E-Print Network (OSTI)

33 3D/4D MODELLING, VISUALIZATION AND INFORMATION FRAMEWORKS: CURRENT U.S. GEOLOGICAL SURVEY to visualize and model geologic data and information in 3 spatial dimensions (3D) and sometimes adding time in visualizing and coupling geologic, hydrologic, atmospheric, and biologic processes together into 3D/4D

432

3D Harmonic Mapping and Tetrahedral Meshing of Brain Imaging Data  

E-Print Network (OSTI)

3D Harmonic Mapping and Tetrahedral Meshing of Brain Imaging Data Yalin Wang1 , Xianfeng Gu2 , Paul Department, Harvard University, Cambridge, MA, USA Abstract. We developed two techniques to address 3D volume algorithm finds a harmonic map from a 3-manifold to a 3D solid sphere and the second is a novel sphere

Thompson, Paul

433

SEEING 3D OBJECTS IN A SINGLE 2D IMAGE Diego Rother  

E-Print Network (OSTI)

SEEING 3D OBJECTS IN A SINGLE 2D IMAGE By Diego Rother and Guillermo Sapiro IMA Preprint SeriesD segmentation, object recognition, and 3D reconstruction from a single image is introduced in this paper. The proposed approach partitions 3D space into voxels and estimates the voxel states

434

3D MHD Free Surface Fluid Flow Simulation Based on Magnetic-Field Induction Equations  

E-Print Network (OSTI)

1 3D MHD Free Surface Fluid Flow Simulation Based on Magnetic-Field Induction Equations H.L. HUANG Huang@fusion.ucla.edu Abstract: The purpose of this paper is to present our recent efforts on 3D MHD-plane magnetic field configurations have shown that 3D MHD effects from a surface normal field gradient cause

California at Los Angeles, University of

435

3D-Model Search Engine from Photos Tarik Filali Ansary  

E-Print Network (OSTI)

3D-Model Search Engine from Photos Tarik Filali Ansary LIFL UMR CNRS/USTL 8022 Univ. Lille 1 Univ. Lille 1 颅 France daoudi@lifl.fr ABSTRACT In this paper, we present the FOX-MIIRE 3D-Model Search uses statisti- cal model distribution scores to select the optimal number of views to characterise a 3D

Vandeborre, Jean-Philippe

436

3D Human Motion Analysis Framework for Shape Similarity and Retrieval  

E-Print Network (OSTI)

3D Human Motion Analysis Framework for Shape Similarity and Retrieval Rim Slamaa,b , Hazem Wannousa, Villeneuve d'Ascq, France c Institut Mines-T麓el麓ecom / T麓el麓ecom Lille, Villeneuve d'Ascq, France Abstract 3D the problem of 3D shape representation and shape similarity in human video sequences. Our shape representation

Paris-Sud XI, Universit茅 de

437

On 3D retrieval from photos Tarik Filali Ansary, Jean-Phillipe Vandeborre, Mohamed Daoudi  

E-Print Network (OSTI)

On 3D retrieval from photos Tarik Filali Ansary, Jean-Phillipe Vandeborre, Mohamed Daoudi FOX}@enic.fr http://www-rech.enic.fr/fox-miire Abstract In this paper, we propose a method for 3D-model retrieval from one or more photos. This method provides an "opti- mal" selection of 2D views to represent a 3D

Vandeborre, Jean-Philippe

438

3D-Model view characterization using equilibrium planes Adrien Theetten1  

E-Print Network (OSTI)

3D-Model view characterization using equilibrium planes Adrien Theetten1 , Tarik Filali Ansary1 to characteristic views. Abstract We propose a new method for 3D-mesh model charac- teristic view selection. It consists in using the views that come from the equilibrium states of a 3D-model: they cor- respond

Paris-Sud XI, Universit茅 de

439

3D finite amplitude folding: Implications for stress evolution during crustal and lithospheric deformation  

E-Print Network (OSTI)

3D finite amplitude folding: Implications for stress evolution during crustal and lithospheric-layer folding to study this instability in 3D. It is demonstrated that linear theories correctly describe insensitive to the applied background shortening directions. Furthermore, the 3D folding instability reduces

Kaus, Boris

440

3D Cache Hierarchy Optimization Leonid Yavits, Amir Morad, Ran Ginosar  

E-Print Network (OSTI)

3D Cache Hierarchy Optimization Leonid Yavits, Amir Morad, Ran Ginosar Department of Electrical@tx.technion.ac.il, ran@ee.technion.ac.il Abstract--3D integration has the potential to improve the scalability and performance of Chip Multiprocessors (CMP). A closed form analytical solution for optimizing 3D CMP cache

Ginosar, Ran

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Computed 3D visualisation of an extinct cephalopod using computer tomographs  

Science Journals Connector (OSTI)

The first 3D visualisation of a heteromorph cephalopod species from the Southern Alps (Dolomites, northern Italy) is presented. Computed tomography, palaeontological data and 3D reconstructions were included in the production of a movie, which shows ... Keywords: 3D visualisation, Cephalopods, Computer tomography, Cretaceous, Palaeontology

Alexander Lukeneder

2012-08-01T23:59:59.000Z

442

Assessing the protective effect of mountain forests against rockfall using a 3D simulation model  

E-Print Network (OSTI)

Assessing the protective effect of mountain forests against rockfall using a 3D simulation model and compared the results obtained with the 3D simulation model RockyFor with empirical data on tree impacts; Rockfall; 3D simulation model; Swiss Alps 1. Introduction Many mountain forests effectively protect people

Stoffel, Markus

443

THREE DIMENSIONAL INTEGRATED CHARACTERIZATION AND ARCHIVING SYSTEM (3D-ICAS)  

SciTech Connect

The overall objective of this project is to develop an integrated system that remotely characterizes, maps, and archives measurement data of hazardous decontamination and decommissioning (D&D) areas. The system will generate a detailed 3-dimensional topography of the area as well as real-time quantitative measurements of volatile organics and radionuclides. The system will analyze substrate materials consisting of concrete, asbestos, and transite. The system will permanently archive the data measurements for regulatory and data integrity documentation. Exposure limits, rest breaks, and donning and removal of protective garments generate waste in the form of contaminated protective garments and equipment. Survey times are increased and handling and transporting potentially hazardous materials incur additional costs. Off-site laboratory analysis is expensive and time-consuming, often necessitating delay of further activities until results are received. The Three Dimensional Integrated Characterization and Archiving System (3D-ICAS) has been developed to alleviate some of these problems. 3D-ICAS provides a flexible system for physical, chemical and nuclear measurements reduces costs and improves data quality. Operationally, 3D-ICAS performs real-time determinations of hazardous and toxic contamination. A prototype demonstration unit is available for use in early 2000. The tasks in this Phase included: (1) Mobility Platforms: Integrate hardware onto mobility platforms, upgrade surface sensors, develop unit operations and protocol. (2) System Developments: Evaluate metals detection capability using x-ray fluorescence technology. (3) IWOS Upgrades: Upgrade the IWOS software and hardware for compatibility with mobility platform. The system was modified, tested and debugged during 1999 and 2000. The 3D-ICAS was shipped on 11 May 2001 to FIU-HCET for demonstration and validation of the design modifications. These modifications included simplifying the design from a two-vehicle system to a single mobile platform, integration of the XRF sensor for enhanced substrate analysis and upgrading of the IWOS operating system. Several of the system's power supplies were accidentally damaged upon power on because FIU wired 3 phase AC power to the system instead of the requested single phase. Repairs were made in the field to the damaged power supplies but 3 of 5 days time were lost to complete the repairs. Once the repairs were made CyTerra was able to demonstrate the CLR mapping and the movement of the sensor probe to selected locations on the test wall. The XRF sensor was also demonstrated on a stainless steel substrate. A surrogate solution was determined to be below the detection threshold. The radionuclide and GCMS sensors were not demonstrated due to either failed power supply or lack of time remaining in the schedule. The GCMS failure was partially the result of the debugging activities that took place during the week for assessing electrical damage. Specifically, GCMS electronic modules, which control the heating of two of gas transfer elements, may have been damaged during field debugging that was required. Given the financial constraints of the program, CyTerra Corporation decided to return the equipment to Waltham facilities for further assessment. We believe the principles of operation were shown, however a complete demonstration did not occur due to these difficulties.

George Jarvis

2001-06-18T23:59:59.000Z

444

Fully 3D Multiple Beam Dynamics Processes Simulation for the Fermilab Tevatron  

SciTech Connect

The Fermilab Tevatron has been, until 2010, the premier high-energy physics collider in the world. The data collected over the last decade by high-energy physics experiments running at the Tevatron have been analyzed to make important measurements in fundamental areas such as B meson masses and flavor oscillation, searches for the Higgs boson, and supersymmetry. Collecting these data at the limits of detectability has required the Tevatron to operate reliably at high beam intensities to maximize the number of collisions to analyze. This impressive achievement has been assisted by the use of HPC resources and software provided through the SciDAC program. This paper describes the enhancements to the BeamBeam3d code to realistically simulate the Tevatron, the validation of these simulations, and the improvement in equipment reliability and personal safety achieved with the aid of simulations.

Stern, E.; Amundson, J.; Spentzouris, P; Valishev, A.; /Fermilab

2010-06-01T23:59:59.000Z

445

OCEAN THERMAL ENERGY CONVERSION PROGRAMMATIC ENVIRONMENTAL ASSESSMENT  

E-Print Network (OSTI)

Ocean Thermal Energy Conversion (OTEC) Draft Programmaticof ocean thermal energy conversion technology. U.S. Depart~on Ocean TherUial Energy Conversion, June 18, 1979. Ocean

Sands, M.Dale

2013-01-01T23:59:59.000Z

446

3D Model of the Tuscarora Geothermal Area  

SciTech Connect

The Tuscarora geothermal system sits within a ~15 km wide left-step in a major west-dipping range-bounding normal fault system. The step over is defined by the Independence Mountains fault zone and the Bull Runs Mountains fault zone which overlap along strike. Strain is transferred between these major fault segments via and array of northerly striking normal faults with offsets of 10s to 100s of meters and strike lengths of less than 5 km. These faults within the step over are one to two orders of magnitude smaller than the range-bounding fault zones between which they reside. Faults within the broad step define an anticlinal accommodation zone wherein east-dipping faults mainly occupy western half of the accommodation zone and west-dipping faults lie in the eastern half of the accommodation zone. The 3D model of Tuscarora encompasses 70 small-offset normal faults that define the accommodation zone and a portion of the Independence Mountains fault zone, which dips beneath the geothermal field. The geothermal system resides in the axial part of the accommodation, straddling the two fault dip domains. The Tuscarora 3D geologic model consists of 10 stratigraphic units. Unconsolidated Quaternary alluvium has eroded down into bedrock units, the youngest and stratigraphically highest bedrock units are middle Miocene rhyolite and dacite flows regionally correlated with the Jarbidge Rhyolite and modeled with uniform cumulative thickness of ~350 m. Underlying these lava flows are Eocene volcanic rocks of the Big Cottonwood Canyon caldera. These units are modeled as intracaldera deposits, including domes, flows, and thick ash deposits that change in thickness and locally pinch out. The Paleozoic basement of consists metasedimenary and metavolcanic rocks, dominated by argillite, siltstone, limestone, quartzite, and metabasalt of the Schoonover and Snow Canyon Formations. Paleozoic formations are lumped in a single basement unit in the model. Fault blocks in the eastern portion of the model are tilted 5-30 degrees toward the Independence Mountains fault zone. Fault blocks in the western portion of the model are tilted toward steeply east-dipping normal faults. These opposing fault block dips define a shallow extensional anticline. Geothermal production is from 4 closely-spaced wells, that exploit a west-dipping, NNE-striking fault zone near the axial part of the accommodation zone.

Faulds, James E.

2013-12-31T23:59:59.000Z

447

Abstract--3D IC technologies have recently attracted great attention due to the potential performance improvement, power  

E-Print Network (OSTI)

Abstract--3D IC technologies have recently attracted great attention due to the potential a 3D physical design flow based on OpenAccess (named 3D-Craft) to facilitate the rapid adoption of 3D IC technologies. The OpenAccess extension for 3D-Craft is discussed, and the key components including

Cong, Jason "Jingsheng"

448

Solution accelerators for large scale 3D electromagnetic inverse problems  

SciTech Connect

We provide a framework for preconditioning nonlinear 3D electromagnetic inverse scattering problems using nonlinear conjugate gradient (NLCG) and limited memory (LM) quasi-Newton methods. Key to our approach is the use of an approximate adjoint method that allows for an economical approximation of the Hessian that is updated at each inversion iteration. Using this approximate Hessian as a preconditoner, we show that the preconditioned NLCG iteration converges significantly faster than the non-preconditioned iteration, as well as converging to a data misfit level below that observed for the non-preconditioned method. Similar conclusions are also observed for the LM iteration; preconditioned with the approximate Hessian, the LM iteration converges faster than the non-preconditioned version. At this time, however, we see little difference between the convergence performance of the preconditioned LM scheme and the preconditioned NLCG scheme. A possible reason for this outcome is the behavior of the line search within the LM iteration. It was anticipated that, near convergence, a step size of one would be approached, but what was observed, instead, were step lengths that were nowhere near one. We provide some insights into the reasons for this behavior and suggest further research that may improve the performance of the LM methods.

Newman, Gregory A.; Boggs, Paul T.

2004-04-05T23:59:59.000Z

449

Evolutions in 3D numerical relativity using fixed mesh refinement  

E-Print Network (OSTI)

We present results of 3D numerical simulations using a finite difference code featuring fixed mesh refinement (FMR), in which a subset of the computational domain is refined in space and time. We apply this code to a series of test cases including a robust stability test, a nonlinear gauge wave and an excised Schwarzschild black hole in an evolving gauge. We find that the mesh refinement results are comparable in accuracy, stability and convergence to unigrid simulations with the same effective resolution. At the same time, the use of FMR reduces the computational resources needed to obtain a given accuracy. Particular care must be taken at the interfaces between coarse and fine grids to avoid a loss of convergence at higher resolutions, and we introduce the use of "buffer zones" as one resolution of this issue. We also introduce a new method for initial data generation, which enables higher-order interpolation in time even from the initial time slice. This FMR system, "Carpet", is a driver module in the freely available Cactus computational infrastructure, and is able to endow generic existing Cactus simulation modules ("thorns") with FMR with little or no extra effort.

Erik Schnetter; Scott H. Hawley; Ian Hawke

2004-03-02T23:59:59.000Z

450

Reynolds-stress model prediction of 3-D duct flows  

E-Print Network (OSTI)

The paper examines the impact of different modelling choices in second-moment closures by assessing model performance in predicting 3-D duct flows. The test-cases (developing flow in a square duct [Gessner F.B., Emery A.F.: {\\em ASME J. Fluids Eng.} {\\bf 103} (1981) 445--455], circular-to-rectangular transition-duct [Davis D.O., Gessner F.B.: {\\em AIAA J.} {\\bf 30} (1992) 367--375], and \\tsn{S}-duct with large separation [Wellborn S.R., Reichert B.A., Okiishi T.H.: {\\em J. Prop. Power} {\\bf 10} (1994) 668--675]) include progressively more complex strains. Comparison of experimental data with selected 7-equation models (6 Reynolds-stress-transport and 1 scale-determining equations), which differ in the closure of the velocity/pressure-gradient tensor $\\Pi_{ij}$, suggests that rapid redistribution controls separation and secondary-flow prediction, whereas, inclusion of pressure-diffusion modelling improves reattachment and relaxation behaviour.

Gerolymos, G A

2014-01-01T23:59:59.000Z

451

2D/3D registration algorithm for lung brachytherapy  

SciTech Connect

Purpose: A 2D/3D registration algorithm is proposed for registering orthogonal x-ray images with a diagnostic CT volume for high dose rate (HDR) lung brachytherapy. Methods: The algorithm utilizes a rigid registration model based on a pixel/voxel intensity matching approach. To achieve accurate registration, a robust similarity measure combining normalized mutual information, image gradient, and intensity difference was developed. The algorithm was validated using a simple body and anthropomorphic phantoms. Transfer catheters were placed inside the phantoms to simulate the unique image features observed during treatment. The algorithm sensitivity to various degrees of initial misregistration and to the presence of foreign objects, such as ECG leads, was evaluated. Results: The mean registration error was 2.2 and 1.9 mm for the simple body and anthropomorphic phantoms, respectively. The error was comparable to the interoperator catheter digitization error of 1.6 mm. Preliminary analysis of data acquired from four patients indicated a mean registration error of 4.2 mm. Conclusions: Results obtained using the proposed algorithm are clinically acceptable especially considering the complications normally encountered when imaging during lung HDR brachytherapy.

Zvonarev, P. S. [McMaster University, Medical Physics and Applied Radiation Sciences, Hamilton, Ontario L8S 4L8 (Canada); Farrell, T. J.; Hunter, R.; Wierzbicki, M.; Hayward, J. E. [McMaster University, Medical Physics and Applied Radiation Sciences, Hamilton, Ontario L8S 4L8 (Canada); Juravinski Cancer Centre, Medical Physics, Hamilton, Ontario L8V 5C2 (Canada); Sur, R. K. [McMaster University, Medical Physics and Applied Radiation Sciences, Hamilton, Ontario L8S 4L8 (Canada); Juravinski Cancer Centre, Radiation Oncology, Hamilton, Ontario L8V 5C2 (Canada)

2013-02-15T23:59:59.000Z

452

Non-Paraxial Wave Analysis of 3D Airy Beams  

E-Print Network (OSTI)

The 3D Airy beam (AiB) is thoroughly explored from a wave-theory point of view. We utilize the exact spectral integral for the AiB to derive local ray-based solutions that do not suffer from the limitations of the conventional parabolic equation (PE) solution, and are valid far beyond the paraxial zone and for longer ranges. The ray topology near the main lobe of the AiB delineates a hyperbolic umilic diffraction catastrophe, consisting of a cusped double-layered caustic, but this caustic is deformed in the far range where the field loses its beam shape. The field in the vicinity of this caustic is described uniformly by a hyperbolic umilic canonical integral which is structured explicitly on the local geometry of the caustic as obtained from the initial field distribution. In order to accommodate the finite-energy AiB we also modify the canonical integral by adding a complex loss parameter. The canonical integral is calculated using a series expansion and the results are used to identify the validity zone of the conventional PE solution. The analysis is performed within the framework of the non-dispersive AiB where the aperture field is scaled with frequency such that the ray skeleton is frequency-independent. This scaling enables an extension of the theory to the ultra wide band (UWB) regime and ensures that the pulsed field propagates along the curved beam trajectory without dispersion, as will be demonstrated in a subsequent publication.

Y. Kaganovsky; E. Heyman

2011-12-14T23:59:59.000Z

453

Evolution of 3D Boson Stars with Waveform Extraction  

E-Print Network (OSTI)

Numerical results from a study of boson stars under nonspherical perturbations using a fully general relativistic 3D code are presented together with the analysis of emitted gravitational radiation. We have constructed a simulation code suitable for the study of scalar fields in space-times of general symmetry by bringing together components for addressing the initial value problem, the full evolution system and the detection and analysis of gravitational waves. Within a series of numerical simulations, we explicitly extract the Zerilli and Newman-Penrose scalar $\\Psi_4$ gravitational waveforms when the stars are subjected to different types of perturbations. Boson star systems have rapidly decaying nonradial quasinormal modes and thus the complete gravitational waveform could be extracted for all configurations studied. The gravitational waves emitted from stable, critical, and unstable boson star configurations are analyzed and the numerically observed quasinormal mode frequencies are compared with known linear perturbation results. The superposition of the high frequency nonspherical modes on the lower frequency spherical modes was observed in the metric oscillations when perturbations with radial and nonradial components were applied. The collapse of unstable boson stars to black holes was simulated. The apparent horizons were observed to be slightly nonspherical when initially detected and became spherical as the system evolved. The application of nonradial perturbations proportional to spherical harmonics is observed not to affect the collapse time. An unstable star subjected to a large perturbation was observed to migrate to a stable configuration.

Jayashree Balakrishna; Ruxandra Bondarescu; Gregory Daues; F. Siddhartha Guzman; Edward Seidel

2006-02-20T23:59:59.000Z

454

A parallel algorithm for 3D dislocation dynamics  

SciTech Connect

Dislocation dynamics (DD), a discrete dynamic simulation method in which dislocations are the fundamental entities, is a powerful tool for investigation of plasticity, deformation and fracture of materials at the micron length scale. However, severe computational difficulties arising from complex, long-range interactions between these curvilinear line defects limit the application of DD in the study of large-scale plastic deformation. We present here the development of a parallel algorithm for accelerated computer simulations of DD. By representing dislocations as a 3D set of dislocation particles, we show here that the problem of an interacting ensemble of dislocations can be converted to a problem of a particle ensemble, interacting with a long-range force field. A grid using binary space partitioning is constructed to keep track of node connectivity across domains. We demonstrate the computational efficiency of the parallel micro-plasticity code and discuss how O(N) methods map naturally onto the parallel data structure. Finally, we present results from applications of the parallel code to deformation in single crystal fcc metals.

Wang Zhiqiang [University of California - Los Angeles, Los Angeles, CA 90095-1597 (United States)]. E-mail: zhiqiang@lanl.gov; Ghoniem, Nasr [University of California - Los Angeles, Los Angeles, CA 90095-1597 (United States); Swaminarayan, Sriram [University of California, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); LeSar, Richard [University of California, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

2006-12-10T23:59:59.000Z

455

3D MHD modelling of the glidarc behaviour of a low current high voltage DC plasma torch Journal of Physics D: Applied Physics  

E-Print Network (OSTI)

in terms of: global behaviour, arc length, mean voltage and glidarc frequency. 1. Introduction The non-thermal on magnetohydrodynamic (MHD) modelling of atmospheric pressure direct current (DC) plasma torch operating at low current3D MHD modelling of the glidarc behaviour of a low current 颅 high voltage DC plasma torch Journal

Paris-Sud XI, Universit茅 de

456

4. Ocean Modelling and Prediction Matthew H. England and Peter R. Oke  

E-Print Network (OSTI)

be of enormous value. Modelling and pre- diction of ocean currents in coastal regions is important for many and rescue operations, and oil spills. Ocean currents near the coast also a ect beach conditions that impact of the built environment. At larger scales, vast ocean currents carry heat around the globe, a ecting climate

Oke, Peter

457

Real-time monitoring of quorum sensing in 3D-printed bacterial aggregates using scanning electrochemical microscopy  

Science Journals Connector (OSTI)

...manipulating small populations. Micro-3D printing is a lithographic technique capable...cells or small populations. This 3D-printing strategy can organize bacteria...behaviors. Here, we combined micro-3D printing and scanning electrochemical...

Jodi L. Connell; Jiyeon Kim; Jason B. Shear; Allen J. Bard; Marvin Whiteley

2014-01-01T23:59:59.000Z

458

A fully 3D atomistic quantum mechanical study on random dopant induced effects in 25nm MOSFETs  

E-Print Network (OSTI)

A Fully 3D Atomistic Quantum Mechanical Study on RandomWang* Abstract We present a fully 3D atomistic quantum me-Dopant ?uctuation, MOSFETs, 3D, threshold, LCBB, quantum

Jiang, Xiang-Wei

2008-01-01T23:59:59.000Z

459

Roles of 3D traction forces in migration and focal adhesion dynamics of bovine aortic endothelial cells  

E-Print Network (OSTI)

BY BAEC. 51 FIG. 3-21. 3D DISPLACEMENT FIELD BY BAECPAXILLIN 52 xii FIG. 3-22. 3D TRACTION FORCE FIELD BY BAEC61 FIG. 3-31. 3D DISPLACEMENT FIELD OF GFP-FAK TRANSFECTED

Hur, Sung-Sik

2007-01-01T23:59:59.000Z

460

How ocean currents are studied  

Science Journals Connector (OSTI)

How infinite and boundless the ocean must have seemed to the first man to set foot upon its shore. Kind or stern, shallow or steep, the ocean抯 shores have always held a peculiar fascination for man. The moist...

David Tolmazin

1985-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Challenges in Ocean Energy Utilization  

Science Journals Connector (OSTI)

Ocean is a reservoir of energy. It is ... . Development of suitable cost effective technologies for power generation from different forms of ocean energy (like wave energy, tidal energy, Ocean Thermal Energy Conv...

S. Neelamani

2013-01-01T23:59:59.000Z

462

3D Printing of Li-Ion Microbattery Architectures K. Sun, T.-S. Wei, B.Y. Ahn, J.Y. Seo, S.J. Dillon, and J.A. Lewis, "3D  

E-Print Network (OSTI)

3D Printing of Li-Ion Microbattery Architectures K. Sun, T.-S. Wei, B.Y. Ahn, J, and actuators. These 3D printed ba

Faraon, Andrei

463

3-D modelling and analysis of Dst C-responses in the North Pacific Ocean region, revisited  

Science Journals Connector (OSTI)

......order to derive eq. (37) we used the elementary equality cos d = cos cos 0+ sin sin...distribution of the lithosphere: The transverse resistance, R, is taken to be 3 108omega m2 beneath...Schmucker U. , 1985. Magnetic and electric fields due to electromagnetic induction......

Alexei Kuvshinov; Hisashi Utada; Dmitry Avdeev; Takao Koyama

2005-02-01T23:59:59.000Z

464

GalPak3D: A Bayesian parametric tool for extracting morpho-kinematics of galaxies from 3D data  

E-Print Network (OSTI)

We present a method to constrain galaxy parameters directly from 3-dimensional data-cubes. The algorithm compares directly the data-cube with a parametric model mapped in $x,y,\\lambda$ coordinates. It uses the spectral Line Spread Function (LSF) and the spatial Point Spread Function (PSF) to generate a 3-dimensional kernel whose characteristics are instrument-specific or user-generated. The algorithm returns the intrinsic modeled properties along with both an `intrinsic' model data-cube and the modeled galaxy convolved with the 3D-kernel. The algorithm uses a Markov Chain Monte Carlo (MCMC) approach with a non-traditional proposal distribution in order to efficiently probe the parameter space. We demonstrate the robustness of the algorithm using 1728 mock galaxies and galaxies generated from hydrodynamical simulations in various seeing conditions from 0.6" to 1.2". We find that the algorithm can recover the morphological parameters (inclination, position angle) to within 10% and the kinematic parameters (maxi...

Bouch, N; Schroetter, I; Michel-Dansac, L; Contini, T

2015-01-01T23:59:59.000Z

465

Accurate, finite-volume methods for 3D MHD on unstructured Lagrangian meshes  

SciTech Connect

Previous 2D methods for magnetohydrodynamics (MHD) have contributed both to development of core code capability and to physics applications relevant to AGEX pulsed-power experiments. This strategy is being extended to 3D by development of a modular extension of an ASCI code. Extension to 3D not only increases complexity by problem size, but also introduces new physics, such as magnetic helicity transport. The authors have developed a method which incorporates all known conservation properties into the difference scheme on a Lagrangian unstructured mesh. Because the method does not depend on the mesh structure, mesh refinement is possible during a calculation to prevent the well known problem of mesh tangling. Arbitrary polyhedral cells are decomposed into tetrahedrons. The action of the magnetic vector potential, A {center_dot} {delta}l, is centered on the edges of this extended mesh. For ideal flow, this maintains {del} {center_dot} B = 0 to round-off error. Vertex forces are derived by the variation of magnetic energy with respect to vertex positions, F = {minus}{partial_derivative}W{sub B}/{partial_derivative}r. This assures symmetry as well as magnetic flux, momentum, and energy conservation. The method is local so that parallelization by domain decomposition is natural for large meshes. In addition, a simple, ideal-gas, finite pressure term has been included. The resistive diffusion part is calculated using the support operator method, to obtain an energy conservative, symmetric method on an arbitrary mesh. Implicit time difference equations are solved by preconditioned, conjugate gradient methods. Results of convergence tests are presented. Initial results of an annular Z-pinch implosion problem illustrate the application of these methods to multi-material problems.

Barnes, D.C.; Rousculp, C.L.

1998-10-01T23:59:59.000Z

466

Ocean General Circulation Models  

SciTech Connect

1. Definition of Subject The purpose of this text is to provide an introduction to aspects of oceanic general circulation models (OGCMs), an important component of Climate System or Earth System Model (ESM). The role of the ocean in ESMs is described in Chapter XX (EDITOR: PLEASE FIND THE COUPLED CLIMATE or EARTH SYSTEM MODELING CHAPTERS). The emerging need for understanding the Earth抯 climate system and especially projecting its future evolution has encouraged scientists to explore the dynamical, physical, and biogeochemical processes in the ocean. Understanding the role of these processes in the climate system is an interesting and challenging scientific subject. For example, a research question how much extra heat or CO2 generated by anthropogenic activities can be stored in the deep ocean is not only scientifically interesting but also important in projecting future climate of the earth. Thus, OGCMs have been developed and applied to investigate the various oceanic processes and their role in the climate system.

Yoon, Jin-Ho; Ma, Po-Lun

2012-09-30T23:59:59.000Z

467

Chapter 16 - Ocean Engines  

Science Journals Connector (OSTI)

Publisher Summary Ocean thermal energy converters (OTECs) took advantage of the ocean acting as an immense collector and storer of solar radiation, thus delivering a steady flow of low-grade thermal energy. The ocean plays a similar role in relation to the wind energy, which is transformed into waves far steadier than the air currents that created them. Nevertheless, waves are neither steady nor concentrated enough to constitute a highly attractive energy source notwithstanding their large total power. There is little net horizontal motion of water in a surface ocean wave. A floating object drifts in the direction of the wave with about 1% of the wave velocity. A given elementary cell of water will move in a vertical circle, surging forward near the crest of the wave but receding by an almost equal amount at the trough. Any system in which the wave velocity depends on wavelength is called dispersive; hence the deep ocean is dispersive.

Aldo Vieira da Rosa

2009-01-01T23:59:59.000Z

468

A systematic approach for 2D-image to 3D-range registration in urban environments  

E-Print Network (OSTI)

applicable to models of any type (i.e. 3D point clouds, 3D meshes, CAD, SketchUp, etc.). Our system first

Stamos, Ioannis

469

Optimal Control Strategy Search Using a Simplest 3-D PWR Xenon Oscillation Simulator  

SciTech Connect

Power spatial oscillations due to the transient xenon spatial distribution are well known as xenon oscillation in large PWRs. When the reactor size becomes larger than the current design, then even radial oscillations can be also divergent. Even if the radial oscillation is convergent, when some control rods malfunction occurs, it is necessary to suppress the oscillation in as short time as possible. In such cases, optimal control strategy is required. Generally speaking the optimality search based on the modern control theory requires a lot of calculation for the evaluation of state variables. In the case of control rod malfunctions the xenon oscillation could be three dimensional. In such case, direct core calculations would be inevitable. From this point of view a very simple model, only four point reactor model, has been developed and verified. In this paper, an example of a procedure and the results for optimal control strategy search are presented. It is shown that we have only one optimal strategy within a half cycle of the oscillation with fixed control strength. It is also shown that a 3-D xenon oscillation introduced by a control rod malfunction can not be controlled by only one control step as can be done for axial oscillations. They might be quite strong limitations to the operators. Thus it is recommended that a strategy generator, which is quick in analyzing and easy to use, might be installed in a monitoring system or operator guiding system. (author)

Yoichiro, Shimazu [Graduate School of Engineering, Hokkaido University, Kita13, Nishi8, Kita-ku, Sapporo (Japan)

2004-07-01T23:59:59.000Z

470

A pilot study: 3D stereo photogrammetric image superimposition on to 3D CT scan images the future of orthognathic surgery  

E-Print Network (OSTI)

the Radiology Department of the Glasgow Dental School, Figure 1. A mask was then constructed on top Walker c and Donald Hadley d a Glasgow Dental Hospital and School, Glasgow, Scotland,UK b 3D

Nebel, Jean-Christophe

471

3D Channel Model Emulation in a MIMO OTA , Pekka Kysti 2  

E-Print Network (OSTI)

1 3D Channel Model Emulation in a MIMO OTA Setup Wei Fan1 , Pekka Ky枚sti 2 , Fan Sun1 , Jesper ? reconstruction technique for 3D geometry-based channels in a multi-probe based MIMO OTA setup. The proposed in realistic environ- ments in the lab, it would be desirable that the 3D radio channels can be accurately

Berning, Torsten

472

Low-cost, Efficient, Flexible Solar Cells with 3D Nanopillar...  

NLE Websites -- All DOE Office Websites (Extended Search)

Photovoltaic Solar Photovoltaic Find More Like This Return to Search Low-cost, Efficient, Flexible Solar Cells with 3D Nanopillar Arrays Lawrence Berkeley National Laboratory...

473

A 3D HUMAN TEETH DATABASE CONSTRUCTION BASED ON A POINT-BASED SHAPE REGISTRATION  

E-Print Network (OSTI)

. Chen2 , A. A. Farag2 , R. Pusateri2 , C. Carter2 , M. Miller2 , A. Farman3 , D. Tasman3 1 Computer

Farag, Aly A.

474

3D analysis of magnetization distribution magnetized by capacitor-discharge impulse magnetizer  

Science Journals Connector (OSTI)

Method for calculating the magnetization distribution magnetized by capacitor-discharge impulse magnetizer is expanded to 3D, and the calculated flux distribution is compared with measured one.

Norio Takahashi

2001-01-01T23:59:59.000Z

475

Observation of Self-Similar Behavior of the 3D, Nonlinear Rayleigh-Taylor Instability  

SciTech Connect

The Rayleigh-Taylor unstable growth of laser-seededm 3D broadband perturbations was experimentally measured in the laser-seeded, planar plastic foils.

Sadot, O.; Smalyuk, V.A.; Delettrez, J. A.; Meyerhofer, D.D.; Sangster, T.C.; Betti, R.; Goncharov, V.N.; Shvarts, D.

2005-12-29T23:59:59.000Z

476

Painting by numbersPrinting paintings in 3D Timo de Rijk  

E-Print Network (OSTI)

Delft #12;2 Nuna7 wins again 16 Less heat loss thanks to Organic Rankine Cycle 3D reproduction of paintings

Lindken, Ralph

477

Analysis of microelectronic power distribution networks and exploration of 3D ICs  

E-Print Network (OSTI)

Regulator Based Power Distribution Design Under WorstTanmoy Roy. Power Distribution System Design Methodology andChen, 3D Power Distribution Network Co-design for Nanoscale

Hu, Xiang

2012-01-01T23:59:59.000Z

478

figures for inverse problem paper in 3d - Department of Mathematics ...  

E-Print Network (OSTI)

FIGURES FOR INVERSE PROBLEM PAPER IN 3D. JUAN E. SANTOS. Departamento de Geof sica Aplicada, Facultad de Ciencias Astron omicas y Geof sicas,.

santos

1910-20-20T23:59:59.000Z

479

Sorender: an interactive graphical interface from Softimage 3D TM to Renderman TM  

E-Print Network (OSTI)

Visualizer does not [11,12, 14, 31]. 12 PROBLEM STATEMENT The problem this thesis addresses is creating an interface from Softimage 3D to RenderMan. Softimage 3D is easily the most popular animation system in the Texas A & M Visualization Laboratory... Visualizer does not [11,12, 14, 31]. 12 PROBLEM STATEMENT The problem this thesis addresses is creating an interface from Softimage 3D to RenderMan. Softimage 3D is easily the most popular animation system in the Texas A & M Visualization Laboratory...

Walvoord, John David

2012-06-07T23:59:59.000Z

480

Coherence Holography and Spatial Frequency Comb for 3-D Coherence Imaging  

Science Journals Connector (OSTI)

The principle and the applications of a recently proposed unconventional holography technique, called coherence holography, and a related technique for dispersion-free 3-D coherence...

Takeda, Mitsuo; Wang, Wei; Duan, Zhihui; Miyamoto, Yoko; Rosen, Joseph

Note: This page contains sample records for the topic "3-d operational ocean" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Bob Ellis designs a PPPL first: A 3D printed mirror for microwave...  

NLE Websites -- All DOE Office Websites (Extended Search)

for shorter experiments, decided to try out a novel manufacturing process called 3D printing that produces components as unified wholes with minimal need for further...

482

Next Generation Lunch: Revealing the World抯 First 3D Printed Car (text version)  

Energy.gov (U.S. Department of Energy (DOE))

Below is the text version for the Next Generation Lunch: Revealing the World抯 First 3D Printed Car燰ideo.

483

Next steps in understanding the asymptotics of $3d$ quantum gravity  

E-Print Network (OSTI)

Based on a combinatorial approach and random matrix theory, we show a central limit theorem that gives important insight into causally triangulated $3d$ quantum gravity.

Maria Simonetta Bernabei; Horst Thaler

2014-12-10T23:59:59.000Z

484

E-Print Network 3.0 - advanced 3d power Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Science and Engineering, University of Toronto Collection: Materials Science ; Energy Storage, Conversion and Utilization 23 Physical Design Automation Challenges for 3D...

485

A stacked memory device on logic 3D technology for ultra-high-density data storage  

Science Journals Connector (OSTI)

We have demonstrated, for the first time, a novel three-dimensional (3D) memory chip architecture of stacked-memory-devices-on-logic (SMOL) achieving up to 95% of cell-area efficiency by directly building up memory devices on top of front-end CMOS devices. In order to realize the SMOL, a unique 3D Flash memory device and vertical integration structure have been successfully developed. The SMOL architecture has great potential to achieve tera-bit level memory density by stacking memory devices vertically and maximizing cell-area efficiency. Furthermore, various emerging devices could replace the 3D memory device to develop new 3D chip architectures.

Jiyoung Kim; Augustin J Hong; Sung Min Kim; Kyeong-Sik Shin; Emil B Song; Yongha Hwang; Faxian Xiu; Kosmas Galatsis; Chi On Chui; Rob N Candler; Siyoung Choi; Joo-Tae Moon; Kang L Wang

2011-01-01T23:59:59.000Z

486

Development of 3-D Neutronic Kinetic Model and Control for CANDU Reactors.  

E-Print Network (OSTI)

??The development of a three dimensional (3-D) neutronic kinetic modeling process aiming at control system design for CANadian Deuterium Uranium (CANDU) reactors is carried out (more)

Xia, Lingzhi

2012-01-01T23:59:59.000Z

487

Constraining oceanic dust deposition using surface ocean dissolved Al  

E-Print Network (OSTI)

Constraining oceanic dust deposition using surface ocean dissolved Al Qin Han,1 J. Keith Moore,1; accepted 7 December 2007; published 12 April 2008. [1] We use measurements of ocean surface dissolved Al (DEAD) model to constrain dust deposition to the oceans. Our Al database contains all available

Zender, Charles

488

Simple ocean carbon cycle models  

SciTech Connect

Simple ocean carbon cycle models can be used to calculate the rate at which the oceans are likely to absorb CO{sub 2} from the atmosphere. For problems involving steady-state ocean circulation, well calibrated ocean models produce results that are very similar to results obtained using general circulation models. Hence, simple ocean carbon cycle models may be appropriate for use in studies in which the time or expense of running large scale general circulation models would be prohibitive. Simple ocean models have the advantage of being based on a small number of explicit assumptions. The simplicity of these ocean models facilitates the understanding of model results.

Caldeira, K. [Lawrence Livermore National Lab., CA (United States); Hoffert, M.I. [New York Univ., NY (United States). Dept. of Earth System Sciences; Siegenthaler, U. [Bern Univ. (Switzerland). Inst. fuer Physik

1994-02-01T23:59:59.000Z

489

Ocean Thermal Energy Conversion  

Science Journals Connector (OSTI)

A pertinent question, however, is: what is the worldwide power resource that could be extracted with OTEC plants without affecting the thermohaline ocean circulation? The estimate is that the maximum steady-state...

Dr. Luis A. Vega Ph.D.

2013-01-01T23:59:59.000Z

490

Ocean Thermal Energy Conversion  

Science Journals Connector (OSTI)

A pertinent question, however, is: what is the worldwide power resource that could be extracted with OTEC plants without affecting the thermohaline ocean circulation? The estimate is that the maximum steady-state...

Dr. Luis A. Vega Ph.D.

2012-01-01T23:59:59.000Z

491

Use of Ocean Energies  

Science Journals Connector (OSTI)

For converting the current of water for the production of electricity, there is a wide range of technological approaches. The Italian ocean current power plant named Kobold (Fig.6.2) was the first commercial o...

Prof. Dr.-Ing Hermann-Josef Wagner

2011-01-01T23:59:59.000Z

492

JavaGL and Its Applications for Web3D Platform Bing-Yu Chen Tomoyuki Nishita  

E-Print Network (OSTI)

Internet browsers. It is also a good example for JavaGL. Keywords OpenGL, VRML, Web3D, Java. 1 ABSTRACT This paper proposes a new platform for the 3D graphics on the Internet (or for Web3D as a new platform recently). To develop 3D graphics programs on the Internet is not very easy, because

Ouhyoung, Ming

493

For additional information, please e-mail ctsc_noveltech@med.cornell.edu REQUEST FOR CTSC 3D PRINTING APPLICATIONS  

E-Print Network (OSTI)

for commercialization 3D Printing Novel Technology Award $10,000 (direct costs) with use of the New CTSC 3D Printing with 3D printing technology in order to rapidly develop novel biomedical products with application) and importance of funding to feasibility of the project Research Plan (use of the CTSC 3D Printing Core Facility

Chen, Tsuhan

494

3D MURALE: A Multimedia System for Archaeology John Cosmas, Take Itegaki, Damian Green, Edward Grabczewski, Fred Weimer,  

E-Print Network (OSTI)

3D MURALE: A Multimedia System for Archaeology John Cosmas, Take Itegaki, Damian Green, Edward the 3D Measurement and Virtual Reconstruction of Ancient Lost Worlds of Europe system (3D MURALE have the facility to store and access data. The paper describes the overall architecture of the 3D

Schindler, Konrad

495

3D Rigid Structure from Video: What Are "Easy" Shapes and "Good" Motions ? Pedro M. Q. Aguiar  

E-Print Network (OSTI)

3D Rigid Structure from Video: What Are "Easy" Shapes and "Good" Motions ? Pedro M. Q. Aguiar--Factorization algorithms are increasingly popular to recover 3D rigid structure from video. In this paper, we analyze the rank 1 factorization algorithm to determine what are the most suitable 3D shapes or the best 3D motions

Aguiar, Pedro M. Q.

496

Digits: Freehand 3D Interactions Anywhere Using a Wrist-Worn Gloveless Sensor  

E-Print Network (OSTI)

on the move. By instrumenting only the wrist, the user's entire hand is left to interact freely withoutDigits: Freehand 3D Interactions Anywhere Using a Wrist-Worn Gloveless Sensor David Kim1,2 , Otmar@ics.forth.gr, p.l.olivier@ncl.ac.uk Figure 1: A) Digits is a wrist-worn sensor for freehand 3D interactions

497

High and Low Temperature Series Estimates for the Critical Temperature of the 3D Ising Model  

E-Print Network (OSTI)

of the 3D Ising Model Zaher Salman and Joan Adler Department-dimensional Ising model on the simple cubic lattice. Our analys* *is of Butera and Comi's new 32 term temperature of the three-dimensional (3d) Ising model on the si* *mple cubic lattice has been exhaustively

Adler, Joan

498

High and Low Temperature Series Estimates for the Critical Temperature of the 3D Ising Model  

E-Print Network (OSTI)

High and Low Temperature Series Estimates for the Critical Temperature of the 3D Ising Model Zaher Abstract We have analysed low and high temperature series expansions for the three颅dimensional Ising model temperature of the three颅dimensional (3d) Ising model on the simple cubic lattice has been exhaustively

Adler, Joan

499

THE 3D DIMER AND ISING PROBLEMS REVISITED MARTIN LOEBL AND LENKA ZDEBOROV  

E-Print Network (OSTI)

THE 3D DIMER AND ISING PROBLEMS REVISITED MARTIN LOEBL AND LENKA ZDEBOROV #19; A Abstract. We adjacency matrices, and the #12;nite 3D Ising partition sum as a linear combination of products over in basic statistical physics models, the Ising and the Dimer models. Let us mention two such recent

Loebl, Martin

500

Sensor Fusion of Structure-From-Motion, Bathymetric 3D, and Beacon-Based Navigation Modalities.  

E-Print Network (OSTI)

multiple types of fusion. When fusion is performed at the data level, each modality is used to ex- tract 3DSensor Fusion of Structure-From-Motion, Bathymetric 3D, and Beacon-Based Navigation Modalities for the fusion of 3D data underwater obtained from multiple sensing modali- ties. In particular, we examine

Eustice, Ryan