Powered by Deep Web Technologies
Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Hospital Triage in the First 24 Hours after a Nuclear or Radiological Disaster  

NLE Websites -- All DOE Office Websites (Extended Search)

Hospital Triage in the First 24 Hours after a Nuclear or Radiological Disaster Hospital Triage in the First 24 Hours after a Nuclear or Radiological Disaster Berger, ME; Leonard, RB; Ricks, RC; Wiley, AL; Lowry, PC; Flynn, DF Abstract: This article addresses the problems emergency physicians would face in the event of a nuclear or radiological catastrophe. It presents information about what needs to be done so that useful information will be gathered and reasonable decisions made in the all important triage period. A brief introductory explanation of radiation injury is followed by practical guides for managing the focused history, physical exam, laboratory tests, initial treatment, and disposition of victims of acute radiation syndrome and combined injury. The guides are not intended to serve as a hospital's "emergency

2

Mirant: Ambient 24 Hour SO2 Values: Model vs Monitor | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mirant: Ambient 24 Hour SO2 Values: Model vs Monitor Mirant: Ambient 24 Hour SO2 Values: Model vs Monitor Mirant: Ambient 24 Hour SO2 Values: Model vs Monitor Docket No. EO-05-01: Mirant: Ambient 24 Hour SO2 Values: Model vs Monitor, March 2002 to November 2004, showing the model overprediction Mirant: Ambient 24 Hour SO2 Values: Model vs Monitor More Documents & Publications Comments on Department of Energy's Emergency Order To Resume Limited Operation at Mirant's Potomac River Generating Station and Proposed Mirant Compliance Plan Answer of Potomac Electric Power Company and PJM lnterconnection, L.L.C. to the October 6, 2005 motion filed by the Virginia Department of Environmental Quality Special Environmental Analysis For Actions Taken under U.S. Department of Energy Emergency Orders Regarding Operation of the Potomac River Generating

3

Derivation of 24-Hour Average SO2, Background for the Update 1 Report |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Derivation of 24-Hour Average SO2, Background for the Update 1 Derivation of 24-Hour Average SO2, Background for the Update 1 Report Derivation of 24-Hour Average SO2, Background for the Update 1 Report Docket No. EO-05-01. As supporting documentation for "Update 1 to: A Dispersion Modeling Analysis of Downwash from Mirant's Potomac River Power Plant: Modeling Unit 1 Emissions in a Cycling Mode" this memo documents the fact that the observed 24-hour SO2 background concentrations during periods when meteorological conditions produce the highest impacts from Unit 1. Derivation of 24-Hour Average SO2, Background for the Update 1 Report More Documents & Publications Review of the ENSR Report Titled "Update 1 to: A Dispersion Modeling Analysis of Downwash from Mirant's Potomac River Power Plant"

4

TJ Automation | Open Energy Information  

Open Energy Info (EERE)

TJ Automation TJ Automation Jump to: navigation, search Name TJ Automation Facility TJ Automation Sector Wind energy Facility Type Small Scale Wind Facility Status In Service Owner TJ Automation Energy Purchaser TJ Automation Location Archbold OH Coordinates 41.45823855°, -84.30666804° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.45823855,"lon":-84.30666804,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

5

Sams Teach Yourself Paint Shop Pro 6 in 24 Hours, 1st edition  

Science Conference Proceedings (OSTI)

From the Publisher:This easily accessible tutorial uses a friendly, conversational approach to teach you the basics of Paint Shop Pro 6. With its careful, step-by-step approach, Sams Teach Yourself Paint Shop Pro 6 in 24 Hours makes it easy even for ...

T. Michael Clark; Michael Clark / Kris Tufto

1999-11-01T23:59:59.000Z

6

Context and Structure in Automated Full-Text Information Access  

E-Print Network (OSTI)

Context and Structure in Automated Full-Text Information Access Marti A. Hearst Report No. UCB 94720 #12;#12;Context and Structure in Automated Full-Text Information Access by Marti A. Hearst B and Structure in Automated Full-Text Information Access Copyright c 1994 by Marti A. Hearst #12;In memory of my

Hearst, Marti

7

Automation Alley Technology Center | Open Energy Information  

Open Energy Info (EERE)

Automation Alley Technology Center Jump to: navigation, search Name Automation Alley Technology Center Place United States Sector Services Product General Financial & Legal...

8

Solar Automation Inc | Open Energy Information  

Open Energy Info (EERE)

Inc Inc Jump to: navigation, search Name Solar Automation Inc Place Albuquerque, New Mexico Zip NM 8110 Product Produces manufacturing equipment for PV cells. References Solar Automation Inc[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Solar Automation Inc is a company located in Albuquerque, New Mexico . References ↑ "Solar Automation Inc" Retrieved from "http://en.openei.org/w/index.php?title=Solar_Automation_Inc&oldid=351247" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes Special pages Printable version Permanent link Browse properties About us Disclaimers Energy blogs Linked Data Developer services

9

Mirle Automation Corporation | Open Energy Information  

Open Energy Info (EERE)

Mirle Automation Corporation Mirle Automation Corporation Jump to: navigation, search Name Mirle Automation Corporation Place Hsinchu, Taiwan Zip 30077 Sector Solar Product A Taiwan-based automation system integrators and related product manufacturers who have entered thin film solar cell manufacturing equipment business. Coordinates 24.69389°, 121.148064° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":24.69389,"lon":121.148064,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

10

Definition: Distribution Automation | Open Energy Information  

Open Energy Info (EERE)

Automation Automation Jump to: navigation, search Dictionary.png Distribution Automation DA is a family of technologies including sensors, processors, communication networks, and switches that can perform a number of distribution system functions depending on how they are implemented. Over the last 20 years, utilities have been applying DA to improve reliability, service quality and operational efficiency. More recently, DA is being applied to perform automatic switching, reactive power compensation coordination, or other feeder operations/control.[1] Related Terms sustainability, smart grid References ↑ https://www.smartgrid.gov/category/technology/distribution_automation [[Ca LikeLike UnlikeLike You and one other like this.One person likes this. Sign Up to see what your friends like.

11

AIS Automation Dresden | Open Energy Information  

Open Energy Info (EERE)

AIS Automation Dresden AIS Automation Dresden Jump to: navigation, search Name AIS Automation Dresden Place Dresden, Germany Zip D-01237 Product Provides software for industrial process control for the semiconductor and photovoltaic industries. Coordinates 51.053645°, 13.740815° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":51.053645,"lon":13.740815,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

12

Definition: Automated Capacitors | Open Energy Information  

Open Energy Info (EERE)

Capacitors Capacitors Jump to: navigation, search Dictionary.png Automated Capacitors Capacitors can increase the voltage on a distribution circuit by providing reactive power (often referred to as volt-amperes-reactive or VArs). Capacitor banks are switched in discrete steps, either manually, or in response to the voltage at the location where they are connected; typically, distribution capacitor banks are switched in a single step. If the voltage falls too far below the set point, the capacitor is switched in to raise the voltage. If the voltage rises too high above the set point, the capacitor is switched out to lower the voltage. Automated capacitors can be switched in coordination with other voltage control devices with signals from local sensors, distribution automation systems, or grid

13

Definition: Automated Voltage Regulators | Open Energy Information  

Open Energy Info (EERE)

Regulators Regulators Jump to: navigation, search Dictionary.png Automated Voltage Regulators Voltage regulators are transformers that can increase or decrease the voltage on a distribution circuit to help keep the voltage within a pre-determined band. Unlike capacitor banks, voltage regulators cannot adjust power factor. These devices typically monitor the voltage at the location where they are connected, and compare it to a programmed set point. If the voltage deviates too far from the set point, the voltage regulator can increase or decrease its output voltage by moving the tap on the secondary side up or down. An automated voltage regulator can operate with remote control signals, or in concert with other area voltage control devices, to help regulate distribution voltage in a coordinated fashion.

14

Energy Automation Systems Inc | Open Energy Information  

Open Energy Info (EERE)

Energy Automation Systems Inc Energy Automation Systems Inc Jump to: navigation, search Name Energy Automation Systems Inc. Place Hendersonville, Tennessee Zip 37075 Sector Buildings, Efficiency Product An energy efficiency consultancy firm focusing on analysis of energy consumption in buildings and providing improvments in the efficiency of the distribution system and equipment loads, similar to an ESCO. Coordinates 36.304861°, -86.620214° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":36.304861,"lon":-86.620214,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

15

Manz Automation AG | Open Energy Information  

Open Energy Info (EERE)

AG AG Jump to: navigation, search Name Manz Automation AG Place Reutlingen, Baden-Württemberg, Germany Zip D-72768 Sector Solar Product German manufacturer of solar and LCD capital equipment. Coordinates 48.49159°, 9.21487° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.49159,"lon":9.21487,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

16

The Influence of Variations in Surface Treatment on 24-Hour Forecasts with a Limited Area Model, Including a Comparison of Modeled and Satellite-Measured Surface Temperatures  

Science Conference Proceedings (OSTI)

The effect of variations in surface parameters on 24-hour limited area forecasts has been examined on a day in July 1981. The vehicle for the study is a ten-level primitive equation model covering most of the continental United States. Variations ...

George Diak; Stacey Heikkinen; John Rates

1986-01-01T23:59:59.000Z

17

Guidelines for Implementing Substation Automation Using IEC61850, the International Power System Information Modeling Standard  

Science Conference Proceedings (OSTI)

This report provides guidelines for substation planners, project managers, substation engineers, information technologists, and substation integrators on informational issues related to substation automation (SA) when IEC61850 standards are used.

2004-12-22T23:59:59.000Z

18

Definition: Automated Islanding And Reconnection | Open Energy Information  

Open Energy Info (EERE)

Islanding And Reconnection Islanding And Reconnection Jump to: navigation, search Dictionary.png Automated Islanding And Reconnection Automated Islanding and Reconnection Automated islanding and reconnection is achieved by automated separation and subsequent reconnection (autonomous synchronization) of an independently operated portion of the T&D system (i.e., microgrid) from the interconnected electric grid. A microgrid is an integrated energy system consisting of interconnected loads and distributed energy resources which, as an integrated system, can operate in parallel with the grid or as an island.[1] View on Wikipedia Wikipedia Definition Islanding refers to the condition in which a distributed (DG) generator continues to power a location even though electrical grid power

19

Comparison groups on bills: Automated, personalized energy information  

SciTech Connect

A program called ``Innovative Billing?? has been developed to provide individualized energy information for a mass audience?the entireresidential customer base of an electric or gas utility. Customers receive a graph on the bill that compares that customer?s consumption with othersimilar customers for the same month. The program aims to stimulate customers to make ef?ciency improvements. To group as many as severalmillion customers into small ``comparison groups??, an automated method must be developed drawing solely from the data available to the utility.This paper develops and applies methods to compare the quality of resulting comparison groups.A data base of 114,000 customers from a utility billing system was used to evaluate Innovative Billing comparison groups, comparing fouralternative criteria: house characteristics (?oor area, housing type, and heating fuel); street; meter read route; billing cycle. Also, customers wereinterviewed to see what forms of comparison graphs made most sense and led to fewest errors of interpretation. We ?nd that good qualitycomparison groups result from using street name, meter book, or multiple house characteristics. Other criteria we tested, such as entire cycle, entiremeter book, or single house characteristics such as ?oor area, resulted in poor quality comparison groups. This analysis provides a basis forchoosing comparison groups based on extensive user testing and statistical analysis. The result is a practical set of guidelines that can be used toimplement realistic, inexpensive innovative billing for the entire customer base of an electric or gas utility.

Iyer, Maithili; Kempton, Willett; Payne, Christopher

2006-07-01T23:59:59.000Z

20

Definition: Automated Feeder And Line Switching | Open Energy Information  

Open Energy Info (EERE)

Definition Definition Edit with form History Facebook icon Twitter icon » Definition: Automated Feeder And Line Switching Jump to: navigation, search Dictionary.png Automated Feeder And Line Switching Automated feeder and line switching is realized through automatic isolation and reconfiguration of faulted segments of distribution feeders or transmission lines via sensors, controls, switches, and communications systems. These devices can operate autonomously in response to local events or in response to signals from a central control system.[1] Related Terms transmission lines, transmission line References ↑ SmartGrid.gov 'Description of Functions' An i LikeLike UnlikeLike You like this.Sign Up to see what your friends like. nline Glossary Definition Retrieved from "http://en.openei.org/w/index.php?title=Definition:Automated_Feeder_And_Line_Switching&oldid=480562"

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Automated Information Extraction to Support Biomedical Decision Model Construction: A Preliminary Design  

E-Print Network (OSTI)

We propose an information extraction framework to support automated construction of decision models in biomedicine. Our proposed technique classifies text-based documents from a large biomedical literature repository, e.g., ...

Li, Xiaoli

22

Teach Yourself in 24 Hours  

E-Print Network (OSTI)

"ations .................................................. 302 Reclaiming Memory with the kill Command .................................. 303 Getting System Load in a retrieval system, or transmitted by any means, electronic, mechanical, photo- copying, recording 1 Hour 1 Preparing to Install Linux 3 2 Installing Linux 11 3 Configuring the X Window System 31

Eckmiller, Rolf

23

KSL Kuttler Automation Systems GmbH | Open Energy Information  

Open Energy Info (EERE)

KSL Kuttler Automation Systems GmbH KSL Kuttler Automation Systems GmbH Jump to: navigation, search Name KSL-Kuttler Automation Systems GmbH Place Dauchingen, Baden-Württemberg, Germany Zip 78083 Sector Solar Product KSL-Kuttler Automation Systems GmbH is a manufacturer of automation systems for the PCB-industry and solar industry. KSL Kuttler was acquired by Suntech in April 2008. Coordinates 48.090319°, 8.552377° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.090319,"lon":8.552377,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

24

Security Automation Conference & Workshop  

Science Conference Proceedings (OSTI)

... Security Automation Conference & Workshop. ... Richard Hale, DISA - Information Security & Security Automation in DoD (coming soon); ...

25

Aescusoft GmbH Automation | Open Energy Information  

Open Energy Info (EERE)

Aescusoft GmbH Automation Aescusoft GmbH Automation Jump to: navigation, search Name Aescusoft GmbH Automation Place Ettenheim, Germany Zip 77955 Product Offers PV cell testing lines. Coordinates 48.256309°, 7.813654° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.256309,"lon":7.813654,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

26

DA (Distribution Automation) (Smart Grid Project) | Open Energy Information  

Open Energy Info (EERE)

DA (Distribution Automation) (Smart Grid Project) DA (Distribution Automation) (Smart Grid Project) Jump to: navigation, search Project Name DA (Distribution Automation) Country Netherlands Coordinates 52.132633°, 5.291266° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":52.132633,"lon":5.291266,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

27

International Automated Systems Inc IAUS | Open Energy Information  

Open Energy Info (EERE)

International Automated Systems Inc IAUS International Automated Systems Inc IAUS Jump to: navigation, search Name International Automated Systems Inc (IAUS) Place Salem, Utah Zip 84653 Product Has developed a lens-based technology for concentrating heat in STEGSs, which it plans to deploy at projects. Coordinates 42.554485°, -88.110549° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.554485,"lon":-88.110549,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

28

Automation of disassembly processes and its information systems  

Science Conference Proceedings (OSTI)

The recycling of the manufacturing products becomes a major concern in the majority of the industrialized countries. To be effective this one cannot be considered only in the ultimate stage of the life cycle of the product and must be more or less automated. ...

B. T. David; N. Boutros; K. Saikali; D. Chevron; S. Gerner; A. Skaf; Z. Binder; M. Dubois

1999-02-01T23:59:59.000Z

29

Definition: Automated Voltage And Var Control | Open Energy Information  

Open Energy Info (EERE)

Voltage And Var Control Voltage And Var Control Jump to: navigation, search Dictionary.png Automated Voltage And Var Control Automated voltage and VAR control requires coordinated operation of reactive power resources such as capacitor banks, voltage regulators, transformer load-tap changers, and distributed generation (DG) with sensors, controls, and communications systems. These devices could operate autonomously in response to local events or in response to signals from a central control system.[1] View on Wikipedia Wikipedia Definition Also Known As Volt-VAR Control (VVC) Related Terms smart grid, Reactive Power References ↑ SmartGrid.gov 'Description of Functions' An i LikeLike UnlikeLike You like this.Sign Up to see what your friends like. nline Glossary Definition Retrieved from

30

Substation automation feasibility study. Final report. Export trade information  

SciTech Connect

This study, conducted by Macro Corporation, was funded by the U.S. Trade and Development Agency, on behalf of the Polish Power Grid Company. The report shows the results of a feasibility study for the implementation of substation automation on the company`s high-voltage transmission network. The report is aimed at providing a technical-economic assessment of modernizing the monitoring, protection, and control systems in the major transmission substations. The report is divided into the following sections: (1) Introduction; (2) Existing Situation And Assessment Of Operational Needs; (3) Functional Requirements; (4) Implementation Options and Costs; (5) Guidelines for Staged Implementation; (6) Conclusions and Recommendations.

1995-07-01T23:59:59.000Z

31

Comparison of Average Heart Rates Determined by Surface ECG and 24-Hour Ambulatory ECG (Holter) in Dogs with Spontaneous Atrial Fibrillation  

E-Print Network (OSTI)

The purpose of this study was to compare the heart rates of dogs presenting with spontaneous atrial fibrillation (AF) by a surface electrocardiogram (ECG) and a 24 hour ambulatory ECG (Holter recording) in order to determine if there was a difference between these two diagnostic tests. Seven dogs with clinically stable, spontaneous AF were evaluated with a 6 lead surface ECG (MAC 5000, GE Milwaukee) and a Holter monitor (Monitor device: LifecardCE Delmar Reynolds Medical, Holter analysis:Aria Holter software). Statistical analyses, including t-tests and linear regression models, were performed using Stata data-analysis and statistical software. When heart rates (bpm) determined by both diagnostic testing methods were compared individually and among all of the dogs, no statistically significant differences were found. Complete data for analysis were available in 4 of the 7 dogs. This study demonstrates that despite the potential superiority of Holter monitoring relative to the surface ECG for the diagnosis of cardiac arrhythmias, average heart rates were not statistically different in these 4 dogs with controlled AF. Therefore, the average HR determined by surface ECG in the hospital may be as reliable as the average HR determined by Holter monitoring in dogs with well controlled spontaneous AF.

Perea Lugo, Adriana

2010-12-01T23:59:59.000Z

32

Automated Protocols Used by Labs | Scientific and Technical Information  

Office of Scientific and Technical Information (OSTI)

Notices Notices Automated Protocols Used by Labs Print page Print page Email page Email page DOE laboratories have two additional options for submitting data electronically to OSTI. They are: Batch Upload (Site-to-OSTI), and Harvesting (OSTI-to-Site). The XML DTD supporting Batch Upload specifies the same metadata that is used by the web-based AN 241.1. The main difference between web notice input and Harvesting upload is that the latter allows uploading of multiple records as a batch file. The web 241.1 is for single-record input only. Harvesting consists of three main phases: 1) Metadata mapping and technical development, 2) Testing, and 3) Production. The production phase is ongoing based on monitoring for quality control. Required Metadata Elements Author(s)

33

Automated Human Performance Analysis: Evaluation of Advanced Tools for Extracting Useful Information from Text-Based Reports  

Science Conference Proceedings (OSTI)

Automated text processing systems represent a potentially powerful technology for deriving valuable information from text-based documents. This report describes a preliminary evaluation of advanced tools for extracting useful information from text-based incident and event reports typical of those generated in the energy industry. It also presents a review of background literature and current research related to automated text processing.

2001-11-28T23:59:59.000Z

34

Launching professional services automation: Institutional entrepreneurship for information technology innovations  

Science Conference Proceedings (OSTI)

Why do some information technology innovations come to be adopted widely while others do not? One promising research stream has begun to investigate how institutional factors shape the diffusion of IT innovations. Here we examine how these institutional ... Keywords: Information technology innovation, Institutional entrepreneurship, Legitimation, Mobilization, Organizational community, Organizing vision, Technological momentum

Ping Wang; E. Burton Swanson

2007-01-01T23:59:59.000Z

35

Collaboration, Automation, and Information Management at Hanford High Level Radioactive Waste (HLW) Tank Farms - 14210  

Science Conference Proceedings (OSTI)

Washington River Protection Solutions (WRPS), operator of High Level Radioactive Waste (HLW) Tank Farms at the Hanford Site, is taking an over 20-year leap in technology, replacing systems that were monitored with clipboards and obsolete computer systems, as well as solving major operations and maintenance hurdles in the area of process automation and information management. While WRPS is fully compliant with procedures and regulations, the current systems are not integrated and do not share data efficiently, hampering how information is obtained and managed.

Aurah, Mirwaise Y.; Roberts, Mark A.

2013-12-12T23:59:59.000Z

36

Test Automation Test Automation  

E-Print Network (OSTI)

Test Automation Test Automation Mohammad Mousavi Eindhoven University of Technology, The Netherlands Software Testing 2013 Mousavi: Test Automation #12;Test Automation Outline Test Automation Mousavi: Test Automation #12;Test Automation Why? Challenges of Manual Testing Test-case design: Choosing inputs

Mousavi, Mohammad

37

Terminal automation system maintenance  

SciTech Connect

Nothing has improved petroleum product loading in recent years more than terminal automation systems. The presence of terminal automation systems (TAS) at loading racks has increased operational efficiency and safety and enhanced their accounting and management capabilities. However, like all finite systems, they occasionally malfunction or fail. Proper servicing and maintenance can minimize this. And in the unlikely event a TAS breakdown does occur, prompt and effective troubleshooting can reduce its impact on terminal productivity. To accommodate around-the-clock loading at racks, increasingly unattended by terminal personnel, TAS maintenance, servicing and troubleshooting has become increasingly demanding. It has also become increasingly important. After 15 years of trial and error at petroleum and petrochemical storage and transfer terminals, a number of successful troubleshooting programs have been developed. These include 24-hour {open_quotes}help hotlines,{close_quotes} internal (terminal company) and external (supplier) support staff, and {open_quotes}layered{close_quotes} support. These programs are described.

Coffelt, D.; Hewitt, J. [Engineered Systems Inc., Tempe, AZ (United States)

1997-01-01T23:59:59.000Z

38

ENHANCING SEISMIC CALIBRATION RESEARCH THROUGH SOFTWARE AUTOMATION AND SCIENTIFIC INFORMATION MANAGEMENT  

SciTech Connect

The National Nuclear Security Administration (NNSA) Ground-Based Nuclear Explosion Monitoring Research and Engineering (GNEM R&E) Program at LLNL has made significant progress enhancing the process of deriving seismic calibrations and performing scientific integration, analysis, and information management with software automation tools. Several achievements in schema design, data visualization, synthesis, and analysis were completed this year. Our tool efforts address the problematic issues of very large datasets and varied formats encountered during seismic calibration research. As data volumes have increased, scientific information management issues such as data quality assessment, ontology mapping, and metadata collection that are essential for production and validation of derived calibrations have negatively impacted researchers abilities to produce products. New information management and analysis tools have resulted in demonstrated gains in efficiency of producing scientific data products and improved accuracy of derived seismic calibrations. Significant software engineering and development efforts have produced an object-oriented framework that provides database centric coordination between scientific tools, users, and data. Nearly a half billion parameters, signals, measurements, and metadata entries are all stored in a relational database accessed by an extensive object-oriented multi-technology software framework that includes elements of stored procedures, real-time transactional database triggers and constraints, as well as coupled Java and C++ software libraries to handle the information interchange and validation requirements. Significant resources were applied to schema design to enable recording of processing flow and metadata. A core capability is the ability to rapidly select and present subsets of related signals and measurements to the researchers for analysis and distillation both visually (JAVA GUI client applications) and in batch mode (instantiation of multi-threaded applications on clusters of processors). Development of efficient data exploitation methods has become increasingly important throughout academic and government seismic research communities to address multi-disciplinary large scale initiatives. Effective frameworks must also simultaneously provide the researcher with robust measurement and analysis tools that can handle and extract groups of events effectively and isolate the researcher from the now onerous task of database management and metadata collection necessary for validation and error analysis. Sufficient information management robustness is required to avoid loss of metadata that would lead to incorrect calibration results in addition to increasing the data management burden. Our specific automation methodology and tools improve the researchers ability to assemble quality-controlled research products for delivery into the NNSA Knowledge Base (KB). The software and scientific automation tasks also provide the robust foundation upon which synergistic and efficient development of, GNEM R&E Program, seismic calibration research may be built.

Ruppert, S D; Dodge, D A; Ganzberger, M D; Hauk, T F; Matzel, E M

2007-07-06T23:59:59.000Z

39

ENHANCING SEISMIC CALIBRATION RESEARCH THROUGH SOFTWARE AUTOMATION AND SCIENTIFIC INFORMATION MANAGEMENT  

SciTech Connect

The National Nuclear Security Administration (NNSA) Ground-Based Nuclear Explosion Monitoring Research and Development (GNEMRD) Program at LLNL continues to make significant progress enhancing the process of deriving seismic calibrations and performing scientific integration, analysis, and information management with software automation tools. Our tool efforts address the problematic issues of very large datasets and varied formats encountered during seismic calibration research. New information management and analysis tools have resulted in demonstrated gains in efficiency of producing scientific data products and improved accuracy of derived seismic calibrations. The foundation of a robust, efficient data development and processing environment is comprised of many components built upon engineered versatile libraries. We incorporate proven industry 'best practices' throughout our code and apply source code and bug tracking management as well as automatic generation and execution of unit tests for our experimental, development and production lines. Significant software engineering and development efforts have produced an object-oriented framework that provides database centric coordination between scientific tools, users, and data. Over a half billion parameters, signals, measurements, and metadata entries are all stored in a relational database accessed by an extensive object-oriented multi-technology software framework that includes stored procedures, real-time transactional database triggers and constraints, as well as coupled Java and C++ software libraries to handle the information interchange and validation requirements. Significant resources were applied to schema design to enable management of processing methods and station parameters, responses and metadata. This allowed for the development of merged ground-truth (GT) data sets compiled by the NNSA labs and AFTAC that include hundreds of thousands of events and tens of millions of arrivals. The schema design groundwork facilitated extensive quality-control and revalidation steps. In support of the GT merge effort, a comprehensive site merge process was also accomplished this year that included station site information for tens of thousands of entries from NNSA labs, AFTAC, NEIC, ISC, and IRIS. A core capability is the ability to rapidly select and present subsets of related signals and measurements to the researchers for analysis and distillation both visually (JAVA GUI client applications) and in batch mode (instantiation of multi-threaded applications on clusters of processors). RBAP Version 2 is one such example. Over the past year RBAP was significantly improved in capability and performance. A new role-based security model now allows fine-grain access control over all aspects of the tool's functions enabling researchers to share their work with others without fear of unintended parameter alterations. A new, faster and more reliable GIS mapping framework was added, as well as expanded powerful interactive plotting graphics. In addition, we implemented parent-child type projects to enhance calibration data management. Our specific automation methodology and tools improve the researchers ability to assemble quality-controlled research products for delivery into the NNSA Knowledge Base (KB). The software and scientific automation tasks provide the robust foundation upon which synergistic and efficient development of GNEMRD Program seismic calibration research may be built.

Ruppert, S; Dodge, D A; Ganzberger, M D; Hauk, T F; Matzel, E M

2008-07-03T23:59:59.000Z

40

ENHANCING SEISMIC CALIBRATION RESEARCH THROUGH SOFTWARE AUTOMATION AND SCIENTIFIC INFORMATION MANAGEMENT  

SciTech Connect

The National Nuclear Security Administration (NNSA) Ground-Based Nuclear Explosion Monitoring Research and Development (GNEMRD) Program at LLNL continues to make significant progress enhancing the process of deriving seismic calibrations and performing scientific integration, analysis, and information management with software automation tools. Our tool efforts address the problematic issues of very large datasets and varied formats encountered during seismic calibration research. New information management and analysis tools have resulted in demonstrated gains in efficiency of producing scientific data products and improved accuracy of derived seismic calibrations. The foundation of a robust, efficient data development and processing environment is comprised of many components built upon engineered versatile libraries. We incorporate proven industry 'best practices' throughout our code and apply source code and bug tracking management as well as automatic generation and execution of unit tests for our experimental, development and production lines. Significant software engineering and development efforts have produced an object-oriented framework that provides database centric coordination between scientific tools, users, and data. Over a half billion parameters, signals, measurements, and metadata entries are all stored in a relational database accessed by an extensive object-oriented multi-technology software framework that includes stored procedures, real-time transactional database triggers and constraints, as well as coupled Java and C++ software libraries to handle the information interchange and validation requirements. Significant resources were applied to schema design to enable management of processing methods and station parameters, responses and metadata. This allowed for the development of merged ground-truth (GT) data sets compiled by the NNSA labs and AFTAC that include hundreds of thousands of events and tens of millions of arrivals. The schema design groundwork facilitated extensive quality-control and revalidation steps. In support of the GT merge effort, a comprehensive site merge process was also accomplished this year that included station site information for tens of thousands of entries from NNSA labs, AFTAC, NEIC, ISC, and IRIS. A core capability is the ability to rapidly select and present subsets of related signals and measurements to the researchers for analysis and distillation both visually (JAVA GUI client applications) and in batch mode (instantiation of multi-threaded applications on clusters of processors). RBAP Version 2 is one such example. Over the past year RBAP was significantly improved in capability and performance. A new role-based security model now allows fine-grain access control over all aspects of the tool's functions enabling researchers to share their work with others without fear of unintended parameter alterations. A new, faster and more reliable GIS mapping framework was added, as well as expanded powerful interactive plotting graphics. In addition, we implemented parent-child type projects to enhance calibration data management. Our specific automation methodology and tools improve the researchers ability to assemble quality-controlled research products for delivery into the NNSA Knowledge Base (KB). The software and scientific automation tasks provide the robust foundation upon which synergistic and efficient development of GNEMRD Program seismic calibration research may be built.

Ruppert, S; Dodge, D A; Ganzberger, M D; Hauk, T F; Matzel, E M

2008-07-03T23:59:59.000Z

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Validation Program - The Security Content Automation ...  

Science Conference Proceedings (OSTI)

... Information technology Laboratory (ITL). Security Content Automation Protocol (SCAP) Validation Program. The SCAP Validation ...

2013-12-10T23:59:59.000Z

42

Benefits of Utilizing Advanced Metering Provided Information Support and Control Capabilities in Distribution Automation Application s  

Science Conference Proceedings (OSTI)

Advanced Metering systems can serve a variety of applications beyond revenue cycle services. This paper describes several distribution automation functions that can significantly benefit from integration with the Advanced Metering Infrastructure (AMI). Installation of Smart Meters with two-way communications is under way at several service territories of electric utilities throughout North America, Europe, Asia and Australia. These meters could be capable of providing a variety of data representing the p...

2009-12-22T23:59:59.000Z

43

SMEO: a platform for smart classrooms with enhanced information access and operations automation  

Science Conference Proceedings (OSTI)

This paper explores the area of creating smart spaces using mobile Internet devices to develop intelligent classrooms. We propose a suite of applications that leverage the recent progress made in the domains of mobile computers and information access, ... Keywords: information access, intelligent classrooms, smart spaces, teaching methodologies

Akshey Jawa; Sudip Datta; Sujeeth Nanda; Vishal Garg; Vasudeva Varma; Suresh Chande; Murali Krishna Punaganti Venkata

2010-08-01T23:59:59.000Z

44

Using the web for automated translation extraction in cross-language information retrieval  

Science Conference Proceedings (OSTI)

There have been significant advances in Cross-Language Information Retrieval (CLIR) in recent years. One of the major remaining reasons that CLIR does not perform as well as monolingual retrieval is the presence of out of vocabulary (OOV) terms. Previous ... Keywords: OOV problem, cross-language IR, query translation

Ying Zhang; Phil Vines

2004-07-01T23:59:59.000Z

45

Automation Status  

NLE Websites -- All DOE Office Websites (Extended Search)

NREL Manufacturing R&D Workshop NREL Manufacturing R&D Workshop NREL H2/FC Manufacturing R&D Workshop Automation Status Garry Sperrick garry@sperkllc.com 585-259-0311 August 11, 2011 Automation Status NREL Manufacturing R&D Workshop Presentation Overview ƒ Brief Introduction ƒ DOE / NREL - Review & Discussion ƒ Automation Platforms ƒ Automation Processes ƒ Automation Considerations of the Manufacturer ƒ Manufacturer and the Supplier ƒ Three (3) Automation Programs Following these Guidelines ƒ Automotive Component Manufacturing ƒ Medical Manufacturing ƒ Membrane Electrode Assembly Manufacturing ƒ Hypothetical Fuel Cell Manufacturing Platforms August 11, 2011 Automation Status NREL Manufacturing R&D Workshop Professional Bio ƒ Automation Technician - Mobil Chemical

46

Home Automation  

E-Print Network (OSTI)

In this paper I briefly discuss the importance of home automation system. Going in to the details I briefly present a real time designed and implemented software and hardware oriented house automation research project, capable of automating house's electricity and providing a security system to detect the presence of unexpected behavior.

Ahmed, Zeeshan

2010-01-01T23:59:59.000Z

47

Test Automation Ant JUnit Test Automation  

E-Print Network (OSTI)

Test Automation Ant JUnit Test Automation Mohammad Mousavi Eindhoven University of Technology, The Netherlands Software Testing 2012 Mousavi: Test Automation #12;Test Automation Ant JUnit Outline Test Automation Ant JUnit Mousavi: Test Automation #12;Test Automation Ant JUnit Why? Challenges of Manual Testing

Mousavi, Mohammad

48

HIGHLY AUTOMATED MACROMOLECULAR  

NLE Websites -- All DOE Office Websites (Extended Search)

AUTOMATED MACROMOLECULAR AUTOMATED MACROMOLECULAR CRYSTALLOGRAPHY BEAMLINE (AMX) Group Leader: Dieter Schneider Proposal Team: M. Allaire 1 , L. Berman 1 , M. Chance 2 , W. Hendrickson 3 , A. Héroux 1 , J. Jakoncic 1 , A. Orville 1 , H. Robinson 1 , D. Schneider 1 , W. Shi 2 , A. Soares 1 , V. Stojanoff 1 , R. Sweet 1 1 Brookhaven National Laboratory, 2 Case Western Reserve University, 3 Columbia University MISSION APPLICATIONS AND CAPABILITIES ADDITIONAL INFORMATION * AMX at NSLS-II will provide structural biologists with ready access to an advanced macromolecular crystallography (MX) beamline for the elucidation of structure and function of macromolecular complexes. * Its high flux, tunable energy, and natively small focal spot will make it a crystallographer's preferred beamline. * Its high degree of automation will provide a high throughput

49

Automated testing using executable formal specifications  

Science Conference Proceedings (OSTI)

A new method is presented for the automated random generation of valid content-sensitive test data and corresponding oracle information. The process takes as input a specification of the program under test, expressed as a functional program, and produces ... Keywords: automated program testing, automated random test data generation, automatic testing, computer aided software engineering, executable formal specifications, formal specification, functional program, oracle information, output test cases, program testing, valid content-sensitive test data, valid input space

N. Sanders

1996-01-01T23:59:59.000Z

50

Automated dispenser  

DOE Patents (OSTI)

An automated dispenser having a conventional pipette attached to an actuating cylinder through a flexible cable for delivering precise quantities of a liquid through commands from remotely located computer software. The travel of the flexible cable is controlled by adjustable stops and a locking shaft. The pipette can be positioned manually or by the hands of a robot. 1 fig.

Hollen, R.M.; Stalnaker, N.D.

1989-04-06T23:59:59.000Z

51

Enabling run-time memory data transfer optimizations at the system level with automated extraction of embedded software metadata information  

Science Conference Proceedings (OSTI)

The information about the run-time behavior of software applications is crucial for enabling system level optimizations for embedded systems. This embedded Software Metadata information is especially important today, because several complex multi-threaded ...

Alexandros Bartzas; Miguel Peon-Quiros; Stylianos Mamagkakis; Francky Catthoor; Dimitrios Soudris; Jose M. Mendias

2008-01-01T23:59:59.000Z

52

Automated Demand Response Tests  

Science Conference Proceedings (OSTI)

This report includes assessments and test results of four end-use technologies, representing products in the residential, commercial, and industrial sectors, each configured to automatically receive real-time pricing information and critical peak pricing (CPP) demand response (DR) event notifications. Four different vendors were asked to follow the interface requirements set forth in the Open Automated Demand Response (OpenADR) standard that was introduced to the public in 2008 and currently used in two ...

2008-12-22T23:59:59.000Z

53

Automated Demand Response Tests  

Science Conference Proceedings (OSTI)

This report, which is an update to EPRI Report 1016082, includes assessments and test results of four end-use vendor technologies. These technologies represent products in the residential, commercial, and industrial sectors, each configured to automatically receive real-time pricing information and critical peak pricing (CPP) demand response (DR) event notifications. Four different vendors were asked to follow the interface requirements set forth in the Open Automated Demand Response (OpenADR) Communicat...

2009-03-30T23:59:59.000Z

54

Making data matter : the role of information design and process in applying automated data to improve transit service  

E-Print Network (OSTI)

As public transit agencies install new technology systems they are gaining increasing amounts of data. This data has the potential to change how they operate by generating better information for decision-making. Deriving ...

Tribone, Dominick (Dominick Anthony)

2013-01-01T23:59:59.000Z

55

Guidelines for Implementing Substation Automation Using UCA-SA (Utility Communications Architecture-Substation Automation)  

Science Conference Proceedings (OSTI)

This report provides guidelines for substation engineers, information technologists, and utility managers on the information issues related to substation automation, in particular when UCA-SA (Utility Communications Architecture Substation Automation IEC61850) standards are used. Substation automation is a new challenge for the utility industry, and these guidelines provide the overall vision as well as the specific steps that should be taken for successful implementation of this new enabling cap...

2003-11-11T23:59:59.000Z

56

Automated gas chromatography  

DOE Patents (OSTI)

An apparatus and process for the continuous, near real-time monitoring of low-level concentrations of organic compounds in a liquid, and, more particularly, a water stream. A small liquid volume of flow from a liquid process stream containing organic compounds is diverted by an automated process to a heated vaporization capillary where the liquid volume is vaporized to a gas that flows to an automated gas chromatograph separation column to chromatographically separate the organic compounds. Organic compounds are detected and the information transmitted to a control system for use in process control. Concentrations of organic compounds less than one part per million are detected in less than one minute. 7 figs.

Mowry, C.D.; Blair, D.S.; Rodacy, P.J.; Reber, S.D.

1999-07-13T23:59:59.000Z

57

Definition: Distribution Automation Communications Network | Open Energy  

Open Energy Info (EERE)

Automation Communications Network Automation Communications Network Jump to: navigation, search Dictionary.png Distribution Automation Communications Network A communications network or networks designed to deliver control signals and information between distribution automation devices, and between these devices and utility grid control systems. These networks can utilize wired or wireless connections, and can be utility-owned or provided as services by a third party.[1] Related Terms distribution automation References ↑ https://www.smartgrid.gov/category/technology/distribution_automation_communications_network [[C LikeLike UnlikeLike You like this.Sign Up to see what your friends like. ategory: Smart Grid Definitionssmart grid,smart grid, |Template:BASEPAGENAME]]smart grid,smart grid, Retrieved from

58

Steam Generator Automated Eddy Current Data Analysis: A Benchmarking Study  

Science Conference Proceedings (OSTI)

This benchmarking study informs utility nondestructive evaluation (NDE) engineers of the status of automating analysis of data from steam generator tube eddy current testing. Study results will contribute to a detailed plan for continuing development of automated data analysis system processes. One day, automated data analysis will provide utilities with a consistent, accurate, and cost-effective method of analyzing eddy current inspection data.

1998-12-16T23:59:59.000Z

59

Nearly-automated metadata hierarchy creation  

Science Conference Proceedings (OSTI)

Currently, information architects create metadata category hierarchies manually. We present a nearly-automated approach for deriving such hierarchies, by converting the lexical hierarchy WordNet into a format that reflects the contents of a target ...

Emilia Stoica; Marti A. Hearst

2004-05-01T23:59:59.000Z

60

Automated deduction for verification  

Science Conference Proceedings (OSTI)

Automated deduction uses computation to perform symbolic logical reasoning. It has been a core technology for program verification from the very beginning. Satisfiability solvers for propositional and first-order logic significantly automate the task ...

Natarajan Shankar

2009-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Making automation work  

Science Conference Proceedings (OSTI)

Today's automated systems provide enormous safety and convenience. However, when glitches, problems, or breakdowns occur, the results can be catastrophic.

Samuel Greengard

2009-12-01T23:59:59.000Z

62

Evolution of industrial automation  

Science Conference Proceedings (OSTI)

Automation has been of high priority for the manufacturing sector, from Ford's first set of Model-T Assembly lines in the early 1920s to the modern factory floor. With appropriate automation, the aim was to rationalise the production and keep ... Keywords: Ethernet, architecture, automated manufacturing, bus topology, control servers, distributed control, economies of scale, embedded intelligence, functionality, fuzzy logic, global village, graphic panel, industrial automation, networking, networks

R. Murugesan

2006-03-01T23:59:59.000Z

63

Automated task allocation  

Science Conference Proceedings (OSTI)

The goal of the paradigm shift in Air Traffic Management (ATM) is to increase its overall performance by means of redesigning processes, evolving to a more automated, autonomous and predictable system. Nevertheless, when dealing with automation, it is ... Keywords: ATM, anticipatory, autonomous, centric, compensatory, decision support tools, level of automation, operations research, optimisation, performance metrics, task allocation

Roco Barragn Montes, Eduardo Garca, Francisco Javier Sez Nieto

2013-05-01T23:59:59.000Z

64

Automated Export Control.PDF  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 3 I N S P E C T I O N R E P O R T U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF INSPECTIONS INSPECTION OF THE DEPARTMENT OF ENERGY'S AUTOMATED EXPORT CONTROL SYSTEM DECEMBER 2001 U.S. DEPARTMENT OF ENERGY Washington, DC 20585 December 7, 2001 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman /s/ Inspector General SUBJECT: INFORMATION: Report on "Inspection of the Department of Energy's Automated Export Control System" BACKGROUND The National Defense Authorization Act for Fiscal Year 2000 (NDAA for FY 2000) contained a provision that not later than March 30 of each year the President will submit to Congress, beginning in the year 2000 and ending in the year 2007, an annual report on the Government's policies and procedures with respect to the export of technologies and technical information with

65

Security Automation Developer Days  

Science Conference Proceedings (OSTI)

... not addressed is the actual distribution of standardized ... 3:30 4:45 Automation Content Repositories ... provide protocols for querying devices as to ...

2012-10-26T23:59:59.000Z

66

CAESAR: Computer Automated Resummations  

E-Print Network (OSTI)

This talk gives a brief discussion of the motivations and principles behind computer automated expert semi-analytical resummation (CAESAR) for QCD final states.

Gavin P. Salam

2004-07-30T23:59:59.000Z

67

Automated nutrient analyses in seawater  

Science Conference Proceedings (OSTI)

This manual was assembled for use as a guide for analyzing the nutrient content of seawater samples collected in the marine coastal zone of the Northeast United States and the Bering Sea. Some modifications (changes in dilution or sample pump tube sizes) may be necessary to achieve optimum measurements in very pronounced oligotrophic, eutrophic or brackish areas. Information is presented under the following section headings: theory and mechanics of automated analysis; continuous flow system description; operation of autoanalyzer system; cookbook of current nutrient methods; automated analyzer and data analysis software; computer interfacing and hardware modifications; and trouble shooting. The three appendixes are entitled: references and additional reading; manifold components and chemicals; and software listings. (JGB)

Whitledge, T.E.; Malloy, S.C.; Patton, C.J.; Wirick, C.D.

1981-02-01T23:59:59.000Z

68

Automated Demand Response and Commissioning  

E-Print Network (OSTI)

Fully-Automated Demand Response Test in Large Facilities14in DR systems. Demand Response using HVAC in Commercialof Fully Automated Demand Response in Large Facilities

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Bourassa, Norman

2005-01-01T23:59:59.000Z

69

Automated economic data processing in the changing business world  

Science Conference Proceedings (OSTI)

An attempt is made for exploring some strands of the automated economic data processing in the changing business world. The new realities in business management and automated economic data processing are outlined. Some strands for intellectual support ... Keywords: E-business, M-business, business intelligence, data processing, information technology, knowledge management

Ljuben Kraev

2003-06-01T23:59:59.000Z

70

Automated Demand Response Today  

Science Conference Proceedings (OSTI)

Demand response (DR) has progressed over recent years beyond manual and semi-automated DR to include growing implementation and experience with fully automated demand response (AutoDR). AutoDR has been shown to be of great value over manual and semi-automated DR because it reduces the need for human interactions and decisions, and it increases the speed and reliability of the response. AutoDR, in turn, has evolved into the specification known as OpenADR v1.0 (California Energy Commission, PIER Program, C...

2012-03-29T23:59:59.000Z

71

AUTOMATING GROUNDWATER SAMPLING AT HANFORD  

Science Conference Proceedings (OSTI)

Until this past October, Fluor Hanford managed Hanford's integrated groundwater program for the U.S. Department of Energy (DOE). With the new contract awards at the Site, however, the CH2M HILL Plateau Remediation Company (CHPRC) has assumed responsibility for the groundwater-monitoring programs at the 586-square-mile reservation in southeastern Washington State. These programs are regulated by the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response Compensation and Liability Act (CERCLA). The purpose of monitoring is to track existing groundwater contamination from past practices, as well as other potential contamination that might originate from RCRA treatment, storage, and disposal (TSD) facilities. An integral part of the groundwater-monitoring program involves taking samples of the groundwater and measuring the water levels in wells scattered across the site. More than 1,200 wells are sampled each year. Historically, field personnel or 'samplers' have been issued pre-printed forms that have information about the well(s) for a particular sampling evolution. This information is taken from the Hanford Well Information System (HWIS) and the Hanford Environmental Information System (HEIS)--official electronic databases. The samplers used these hardcopy forms to document the groundwater samples and well water-levels. After recording the entries in the field, the samplers turned the forms in at the end of the day and the collected information was posted onto a spreadsheet that was then printed and included in a log book. The log book was then used to make manual entries of the new information into the software application(s) for the HEIS and HWIS databases. This is a pilot project for automating this tedious process by providing an electronic tool for automating water-level measurements and groundwater field-sampling activities. The automation will eliminate the manual forms and associated data entry, improve the accuracy of the information recorded, and enhance the efficiency and sampling capacity of field personnel. The goal of the effort is to eliminate 100 percent of the manual input to the database(s) and replace the management of paperwork by the field and clerical personnel with an almost entirely electronic process. These activities will include the following: scheduling the activities of the field teams, electronically recording water-level measurements, electronically logging and filing Groundwater Sampling Reports (GSR), and transferring field forms into the site-wide Integrated Document Management System (IDMS).

CONNELL CW; HILDEBRAND RD; CONLEY SF; CUNNINGHAM DE

2009-01-16T23:59:59.000Z

72

Automated Program Description  

E-Print Network (OSTI)

The Programmer's apprentice (PA) is an automated program development tool. The PA depends upon a library of common algorithms (cliches) as the source of its knowledge about programming. The PA uses these cliches to understand ...

Cyphers, D. Scott

73

Automated reaction mapping  

Science Conference Proceedings (OSTI)

Automated reaction mapping is a fundamental first step in the analysis of chemical reactions and opens the door to the development of sophisticated chemical kinetic tools. This article formulates the reaction mapping problem as an optimization problem. ... Keywords: Cheminformatics, mechanisms

John D. Crabtree; Dinesh P. Mehta

2009-02-01T23:59:59.000Z

74

Roxboro Integrated Automation Project  

Science Conference Proceedings (OSTI)

EPRI, Carolina Power & Light (CP&L), and ASEA Brown Boveri (ABB) formed an alliance to develop and demonstrate automation technologies at CP&LOs Roxboro Plant. This alliance is governed by a Memorandum of Understanding that allows all parties to share in the success of the products developed, and to contribute to their commercialization. This research project is intended to demonstrate the economic benefits of efficient and useful plant-wide automation technologies for the utility industry. Successful im...

1997-01-12T23:59:59.000Z

75

Technical and System Requirements for Advanced Distribution Automation  

Science Conference Proceedings (OSTI)

Traditional distribution systems were designed to perform one function: distribute electrical energy to end-users. Advanced Distribution Automation (ADA) is a concept for a fully controllable and flexible distribution system that will facilitate the exchange of both electrical energy and information between participants and system components. This report presents background information on distribution automation technologies and develops a roadmap to achieve the ADA systems required for future power deli...

2004-06-09T23:59:59.000Z

76

NSLS ESH&Q | BNL Emergency Information  

NLE Websites -- All DOE Office Websites (Extended Search)

BNL Emergency Information Reporting Emergencies | Examples of Emergencies | Automated External Defibrillators (AED) | Building Alarm Bells and Evacuation | BNL Site Emergency...

77

Automating DNA processing  

E-Print Network (OSTI)

Technology is currently available to identify the genetic codes responsible for physical traits and genetic diseases in both plants and animals. Regardless of whether the final goal is medical diagnosis or breeder selection, extensive time and resources must be spent in laboratory research to determine the genetic structure of the relevant organisms. DNA processing is riddled with time intensive laboratory techniques that must be improved or replaced if genotyping large numbers of samples is to be accomplished. This thesis identifies and explains modules in DNA processing and how they can be improved by automation. modules associated with genome mapping are the focus of most of the discussion. A functional biochemistry background is provided so that researchers in automation can be efficiently assimilated to future biochen-fistry/automation projects. The needs of biochemistry researchers at Texas A&M University are specifically addressed. Herein, DNA processing has been defined as a series of discrete sub-processes or process modules in order to aid scheduling of future automation projects. Target process modules (sub-processes with a high probability of automation success) have been identified. In addition, possible automation solutions have been proposed for each target module along with a characterization of fundamental design parameters. Concluding this text is a discussion of procedures in genome mapping that have not been sufficiently automated. The initial focus of this thesis is on short term solutions. However, attention is given to more conceptual solutions accompanied by the biochemistry background necessary to begin developing them. Though systems are proposed to improve the efficiency of many processes, no implementation has been attempted. Design specifications are based on observation of current laboratory techniques and the variance that is typically allowed in relevant process parameters in TAMU laboratories.

Wienen, Michael Jan

1994-01-01T23:59:59.000Z

78

Australian Nuclear Science & Technology Organization (ANSTO) Interdicted Samples 24-Hour Report  

Science Conference Proceedings (OSTI)

Categorization is complete. Samples 11-3-1 (NSR-F-270409-01) and 11-3-2 (NSR-F-270409-02) are depleted uranium powders of moderate purity ({approx}65-80 % U). The uranium feed stocks for 11-3-1 and 11-3-2 have both experienced a neutron flux (as demonstrated by the presence of {sup 232}U). Sample 11-3-3 is indistinguishable from a natural uranium ore concentrate of moderate purity ({approx}70-80% U). Two anomalous objects (11-3-1-4 and 11-3-2-5) were found in the material during aliquoting. These objects might be valuable for route attribution.

Kristo, M J; Hutcheon, I D; Grant, P M; Borg, L E; Sharp, M A; Moody, K J; Conrado, C L; Wooddy, P T

2011-01-27T23:59:59.000Z

79

Help when you need it: 24 hours a day! That's Online Tutoring: Anywhere, Anytime  

E-Print Network (OSTI)

.smarthinking.com Troubleshooting Tips: Make sure that your browser is set up to allow cookies and pop-up windows. SMARTHINKING

District of Columbia, University of the

80

Leveraging temporal and spatial separations with the 24-hour knowledge factory paradigm  

Science Conference Proceedings (OSTI)

The 24-H Knowledge Factory facilitates collaboration between geographically and temporally distributed teams. The teams themselves form a strategic partnership whose joint efforts contribute to the completion of a project. Project-related tasks are likewise ... Keywords: Data management, Global software development, Knowledge representation, Offshoring

Amar Gupta; Igor Crk; Rajdeep Bondade

2011-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Here is your MEDEX Identification Card WORLDWIDE 24-HOURS A DAY  

E-Print Network (OSTI)

of Medical Records Continuous Updates to Family, Employer and Home Physician Hotel Arrangements 1977, MEDEX has been assisting travelers worldwide by utilizing highly trained, multilingual

Quigg, Chris

82

24 Hour Day-Ahead Reactive Power Forecasting and Optimal Scheduling  

Science Conference Proceedings (OSTI)

Reactive power management affects not only the system voltage profiles but also system efficiencies. Changes in the flow of reactive power have an influence on system losses. Reactive power forecasting and optimal scheduling of power system control elements can be conducted to efficiently and reliably transfer power across the system. The tool discussed in this report optimizes the power system to produce a security-constrained case, reduce losses, increase reactive reserve, and securely maintain ...

2013-12-29T23:59:59.000Z

83

Linear Regime Duration: Is 24 Hours a Long Time in Synoptic Weather Forecasting?  

Science Conference Proceedings (OSTI)

Day-to-day variations in the growth of uncertainty in the current state of the atmosphere have led to operational ensemble weather predictions in which an ensemble of different initial conditions, each perturbed from the best estimate of the ...

Isla Gilmour; Leonard A. Smith; Roberto Buizza

2001-11-01T23:59:59.000Z

84

Reference Model for Control and Automation Systems in Electrical Power |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Model for Control and Automation Systems in Electrical Model for Control and Automation Systems in Electrical Power Reference Model for Control and Automation Systems in Electrical Power Modern infrastructure automation systems are threatened by cyber attack. Their higher visibility in recent years and the increasing use of modern information technology (IT) components contribute to increased security risk. A means of analyzing these infrastructure automation systems is needed to help understand and study the many system relationships that affect the overall security of the system. Modeling these systems is a very cost effective means of addressing the problem of security from an overall system view. The model presented in the document below provides a structured, cost effective approach to address technical security in process control systems

85

Automated software engineering: supporting understanding  

Science Conference Proceedings (OSTI)

The most important role for automation in software engineering is the support of human understanding. Some aspects of understanding and how it can be supported are discussed. Keywords: Automation, Complexity, Description, Fragmentation, Manipulation, Mechanisation

Michael Jackson

2008-12-01T23:59:59.000Z

86

Automated Transportation Management System (ATMS) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Waste Management Packaging and Transportation Automated Transportation Management System (ATMS) Automated Transportation Management System (ATMS) The Department of Energy's...

87

Automated Demand Response and Commissioning  

E-Print Network (OSTI)

internal conditions. Maximum Demand Saving Intensity [W/ft2]automated electric demand sheds. The maximum electric shed

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Bourassa, Norman

2005-01-01T23:59:59.000Z

88

Portable Automated Mesonet II  

Science Conference Proceedings (OSTI)

The Portable Automated Mesonet II (PAM II) system was developed by NCAR to provide surface mesoscale data for the research needs of the atmospheric science community. The PAM system has 60 remote stations with planned growth to 300. In such a ...

Fred V. Brock; George H. Saum; Steven R. Semmer

1986-12-01T23:59:59.000Z

89

V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

V-205: IBM Tivoli System Automation for Multiplatforms Java V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities July 29, 2013 - 4:20am Addthis PROBLEM: IBM has acknowledged a weakness and multiple vulnerabilities in IBM Tivoli System Automation for Multiplatforms, which can be exploited by malicious, local users to disclose certain sensitive information and gain escalated privileges and by malicious people to disclose certain sensitive information, manipulate certain data, bypass certain security restrictions, cause a DoS (Denial of Service), and compromise a vulnerable system. PLATFORM: The weakness and the vulnerabilities are reported in versions 3.1 through 3.2.2 running on AIX, Linux, Solaris, and Windows.

90

Design and Operation of an Open, Interoperable Automated Demand Response  

NLE Websites -- All DOE Office Websites (Extended Search)

Design and Operation of an Open, Interoperable Automated Demand Response Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings Title Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings Publication Type Journal Article LBNL Report Number LBNL-2340e Year of Publication 2009 Authors Piette, Mary Ann, Girish Ghatikar, Sila Kiliccote, David S. Watson, Edward Koch, and Dan Hennage Journal Journal of Computing Science and Information Engineering Volume 9 Issue 2 Keywords communication and standards, market sectors, openadr Abstract This paper describes the concept for and lessons from the development and field-testing of an open, interoperable communications infrastructure to support automated demand response (auto-DR). Automating DR allows greater levels of participation, improved reliability, and repeatability of the DR in participating facilities. This paper also presents the technical and architectural issues associated with auto-DR and description of the demand response automation server (DRAS), the client/server architecture-based middle-ware used to automate the interactions between the utilities or any DR serving entity and their customers for DR programs. Use case diagrams are presented to show the role of the DRAS between utility/ISO and the clients at the facilities.

91

inform  

Science Conference Proceedings (OSTI)

The monthly member publication of AOCS. inform Inform Magazine Membership Merchandise Subscriptions Journals Membership Merchandise 8C5A902BB64F1A5D499524EFF5918AE0 INFORM-NM 2008

92

New Services for Building Maintenance Enabled by Building Automation  

NLE Websites -- All DOE Office Websites (Extended Search)

New Services for Building Maintenance Enabled by Building Automation New Services for Building Maintenance Enabled by Building Automation Systems Speaker(s): Heikki Ihasalo Date: May 17, 2007 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Peng Xu Today's building automation systems enable building systems integration and access to information from a variety of sources, e.g. fire alarm systems, access control, security systems, lighting and control systems. With the help of Internet technology and XML (Extensible Markup Language) building automation systems can also connect to other enterprise\ applications such as facility management software, maintenance management systems, ERP or financial systems. New applications are also emerging to manage energy consumption in buildings, for example demand response and fault detection

93

Automated Demand Response and Commissioning  

NLE Websites -- All DOE Office Websites (Extended Search)

and Commissioning Title Automated Demand Response and Commissioning Publication Type Conference Paper LBNL Report Number LBNL-57384 Year of Publication 2005 Authors Piette, Mary...

94

Automated Centrifugal Chiller Diagnostician - Available ...  

Summary. Researchers and engineers at PNNL have developed an automated, sophisticated, multi-level, real-time centrifugal chiller diagnostician with ...

95

Heavy Oil Process Monitor: Automated On-Column Asphaltene Precipitation and Re-Dissolution  

Science Conference Proceedings (OSTI)

An automated separation technique was developed that provides a new approach to measuring the distribution profiles of the most polar, or asphaltenic components of an oil, using a continuous flow system to precipitate and re-dissolve asphaltenes from the oil. Methods of analysis based on this new technique were explored. One method based on the new technique involves precipitation of a portion of residua sample in heptane on a polytetrafluoroethylene-packed (PTFE) column. The precipitated material is re-dissolved in three steps using solvents of increasing polarity: cyclohexane, toluene, and methylene chloride. The amount of asphaltenes that dissolve in cyclohexane is a useful diagnostic of the thermal history of oil, and its proximity to coke formation. For example, about 40 % (w/w) of the heptane asphaltenes from unpyrolyzed residua dissolves in cyclohexane. As pyrolysis progresses, this number decrease to below 15% as coke and toluene insoluble pre-coke materials appear. Currently, the procedure for the isolation of heptane asphaltenes and the determination of the amount of asphaltenes soluble in cyclohexane spans three days. The automated procedure takes one hour. Another method uses a single solvent, methylene chloride, to re-dissolve the material that precipitates on heptane on the PTFE-packed column. The area of this second peak can be used to calculate a value which correlates with gravimetric asphaltene content. Currently the gravimetric procedure to determine asphaltenes takes about 24 hours. The automated procedure takes 30 minutes. Results for four series of original and pyrolyzed residua were compared with data from the gravimetric methods. Methods based on the new on-column precipitation and re-dissolution technique provide significantly more detail about the polar constituent's oils than the gravimetric determination of asphaltenes.

John F. Schabron; Joseph F. Rovani; Mark Sanderson

2007-03-31T23:59:59.000Z

96

Installation and Commissioning Automated Demand Response Systems  

Science Conference Proceedings (OSTI)

Demand Response (DR) can be defined as actions taken to reduce electric loads when contingencies, such as emergencies and congestion, occur that threaten supply-demand balance, or market conditions raise supply costs. California utilities have offered price and reliability DR based programs to customers to help reduce electric peak demand. The lack of knowledge about the DR programs and how to develop and implement DR control strategies is a barrier to participation in DR programs, as is the lack of automation of DR systems. Most DR activities are manual and require people to first receive notifications, and then act on the information to execute DR strategies. Levels of automation in DR can be defined as follows. Manual Demand Response involves a labor-intensive approach such as manually turning off or changing comfort set points at each equipment switch or controller. Semi-Automated Demand Response involves a pre-programmed demand response strategy initiated by a person via centralized control system. Fully-Automated Demand Response does not involve human intervention, but is initiated at a home, building, or facility through receipt of an external communications signal. The receipt of the external signal initiates pre-programmed demand response strategies. We refer to this as Auto-DR (Piette et. al. 2005). Auto-DR for commercial and industrial facilities can be defined as fully automated DR initiated by a signal from a utility or other appropriate entity and that provides fully-automated connectivity to customer end-use control strategies. One important concept in Auto-DR is that a homeowner or facility manager should be able to 'opt out' or 'override' a DR event if the event comes at time when the reduction in end-use services is not desirable. Therefore, Auto-DR is not handing over total control of the equipment or the facility to the utility but simply allowing the utility to pass on grid related information which then triggers facility defined and programmed strategies if convenient to the facility. From 2003 through 2006 Lawrence Berkeley National Laboratory (LBNL) and the Demand Response Research Center (DRRC) developed and tested a series of demand response automation communications technologies known as Automated Demand Response (Auto-DR). In 2007, LBNL worked with three investor-owned utilities to commercialize and implement Auto-DR programs in their territories. This paper summarizes the history of technology development for Auto-DR, and describes the DR technologies and control strategies utilized at many of the facilities. It outlines early experience in commercializing Auto-DR systems within PG&E DR programs, including the steps to configure the automation technology. The paper also describes the DR sheds derived using three different baseline methodologies. Emphasis is given to the lessons learned from installation and commissioning of Auto-DR systems, with a detailed description of the technical coordination roles and responsibilities, and costs.

Global Energy Partners; Pacific Gas and Electric Company; Kiliccote, Sila; Kiliccote, Sila; Piette, Mary Ann; Wikler, Greg; Prijyanonda, Joe; Chiu, Albert

2008-04-21T23:59:59.000Z

97

Automated fiber pigtailing machine  

DOE Patents (OSTI)

The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectronic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems. 26 figs.

Strand, O.T.; Lowry, M.E.

1999-01-05T23:59:59.000Z

98

Information Technology Solutions Automated Solar Field Mirror ...  

accuracy of CSP systems Standardizes measurements which may be prone to human variability Significantly improved performance Reduced cost ...

99

Installation and Commissioning Automated Demand Response Systems  

E-Print Network (OSTI)

their partnership in demand response automation research andand Techniques for Demand Response. LBNL Report 59975. Mayof Fully Automated Demand Response in Large Facilities.

Kiliccote, Sila; Global Energy Partners; Pacific Gas and Electric Company

2008-01-01T23:59:59.000Z

100

Installation and Commissioning Automated Demand Response Systems  

E-Print Network (OSTI)

al: Installation and Commissioning Automated Demand ResponseConference on Building Commissioning: April 22 24, 2008al: Installation and Commissioning Automated Demand Response

Kiliccote, Sila; Global Energy Partners; Pacific Gas and Electric Company

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Rockwell Automation - Owens Corning Teaming Profile  

NLE Websites -- All DOE Office Websites (Extended Search)

Rockwell Automation programmable automation controller to collect data on motor kilowatts, speed, and torque. Project Summary By using real time data collected by the...

102

Building Technologies Office: Automated Home Energy Management...  

NLE Websites -- All DOE Office Websites (Extended Search)

Home Area Network Trends SmartGridCity(tm) Integration with Home Controls Automated HomeEnergy Management Automated Monitoring, Control, Diagnostics, Optimization and Soft Repair...

103

Security Automation Considered Harmful? W. Keith Edwards Erika Shehan Poole Jennifer Stoll  

E-Print Network (OSTI)

Security Automation Considered Harmful? W. Keith Edwards Erika Shehan Poole Jennifer Stoll School link in information security. Because of this perception, a growing body of research and commercial activity is focused on automated approaches to security. With these approaches, security decisions

Edwards, Keith

104

Automating the analytical laboratory via the Chemical Analysis Automation paradigm  

Science Conference Proceedings (OSTI)

To address the need for standardization within the analytical chemistry laboratories of the nation, the Chemical Analysis Automation (CAA) program within the US Department of Energy, Office of Science and Technology`s Robotic Technology Development Program is developing laboratory sample analysis systems that will automate the environmental chemical laboratories. The current laboratory automation paradigm consists of islands-of-automation that do not integrate into a system architecture. Thus, today the chemist must perform most aspects of environmental analysis manually using instrumentation that generally cannot communicate with other devices in the laboratory. CAA is working towards a standardized and modular approach to laboratory automation based upon the Standard Analysis Method (SAM) architecture. Each SAM system automates a complete chemical method. The building block of a SAM is known as the Standard Laboratory Module (SLM). The SLM, either hardware or software, automates a subprotocol of an analysis method and can operate as a standalone or as a unit within a SAM. The CAA concept allows the chemist to easily assemble an automated analysis system, from sample extraction through data interpretation, using standardized SLMs without the worry of hardware or software incompatibility or the necessity of generating complicated control programs. A Task Sequence Controller (TSC) software program schedules and monitors the individual tasks to be performed by each SLM configured within a SAM. The chemist interfaces with the operation of the TSC through the Human Computer Interface (HCI), a logical, icon-driven graphical user interface. The CAA paradigm has successfully been applied in automating EPA SW-846 Methods 3541/3620/8081 for the analysis of PCBs in a soil matrix utilizing commercially available equipment in tandem with SLMs constructed by CAA.

Hollen, R.; Rzeszutko, C.

1997-10-01T23:59:59.000Z

105

Robust automated knowledge capture.  

SciTech Connect

This report summarizes research conducted through the Sandia National Laboratories Robust Automated Knowledge Capture Laboratory Directed Research and Development project. The objective of this project was to advance scientific understanding of the influence of individual cognitive attributes on decision making. The project has developed a quantitative model known as RumRunner that has proven effective in predicting the propensity of an individual to shift strategies on the basis of task and experience related parameters. Three separate studies are described which have validated the basic RumRunner model. This work provides a basis for better understanding human decision making in high consequent national security applications, and in particular, the individual characteristics that underlie adaptive thinking.

Stevens-Adams, Susan Marie; Abbott, Robert G.; Forsythe, James Chris; Trumbo, Michael Christopher Stefan; Haass, Michael Joseph; Hendrickson, Stacey M. Langfitt

2011-10-01T23:59:59.000Z

106

Berkeley automated supernova search  

SciTech Connect

The Berkeley automated supernova search employs a computer controlled 36-inch telescope and charge coupled device (CCD) detector to image 2500 galaxies per night. A dedicated minicomputer compares each galaxy image with stored reference data to identify supernovae in real time. The threshold for detection is m/sub v/ = 18.8. We plan to monitor roughly 500 galaxies in Virgo and closer every night, and an additional 6000 galaxies out to 70 Mpc on a three night cycle. This should yield very early detection of several supernovae per year for detailed study, and reliable premaximum detection of roughly 100 supernovae per year for statistical studies. The search should be operational in mid-1982.

Kare, J.T.; Pennypacker, C.R.; Muller, R.A.; Mast, T.S.; Crawford, F.S.; Burns, M.S.

1981-01-01T23:59:59.000Z

107

Integration of Real-Time Data Into Building Automation Systems  

SciTech Connect

The project goal was to investigate the possibility of using predictive real-time information from the Internet as an input to building management system algorithms. The objectives were to identify the types of information most valuable to commercial and residential building owners, managers, and system designers. To comprehensively investigate and document currently available electronic real-time information suitable for use in building management systems. Verify the reliability of the information and recommend accreditation methods for data and providers. Assess methodologies to automatically retrieve and utilize the information. Characterize equipment required to implement automated integration. Demonstrate the feasibility and benefits of using the information in building management systems. Identify evolutionary control strategies.

Mark J. Stunder; Perry Sebastian; Brenda A. Chube; Michael D. Koontz

2003-04-16T23:59:59.000Z

108

Automation in modeling: using automation for finishing room capacity planning  

Science Conference Proceedings (OSTI)

Capacity planning of a furniture finishing system using both deterministic analysis and stochastic simulation is conveniently performed with the aid ActiveX Automation. Users interactively build a complete model of a finishing system with an Excel interface, ...

Ryan Heath Melton; C. Thomas Culbreth; Stephen D. Roberts; Jeffrey A. Joines

2001-12-01T23:59:59.000Z

109

Open Automated Demand Response Communications Specification (Version 1.0)  

Science Conference Proceedings (OSTI)

The development of the Open Automated Demand Response Communications Specification, also known as OpenADR or Open Auto-DR, began in 2002 following the California electricity crisis. The work has been carried out by the Demand Response Research Center (DRRC), which is managed by Lawrence Berkeley National Laboratory. This specification describes an open standards-based communications data model designed to facilitate sending and receiving demand response price and reliability signals from a utility or Independent System Operator to electric customers. OpenADR is one element of the Smart Grid information and communications technologies that are being developed to improve optimization between electric supply and demand. The intention of the open automated demand response communications data model is to provide interoperable signals to building and industrial control systems that are preprogrammed to take action based on a demand response signal, enabling a demand response event to be fully automated, with no manual intervention. The OpenADR specification is a flexible infrastructure to facilitate common information exchange between the utility or Independent System Operator and end-use participants. The concept of an open specification is intended to allow anyone to implement the signaling systems, the automation server or the automation clients.

Piette, Mary Ann; Ghatikar, Girish; Kiliccote, Sila; Koch, Ed; Hennage, Dan; Palensky, Peter; McParland, Charles

2009-02-28T23:59:59.000Z

110

Automating Personalized Battery Management on Smartphones  

E-Print Network (OSTI)

3 Automating Battery Management . . . . . . .122 Battery Goal Setting UI . . . . . . . . . . . . . . .Power and Battery Management . . . . . . . . . . . . . . .

Falaki, Mohamamd Hossein

2012-01-01T23:59:59.000Z

111

Automated User Modeling for Personalized Digital Libraries  

E-Print Network (OSTI)

Digital libraries (DL) have become one of the most typical ways of accessing any kind of digitalized information. Due to this key role, users welcome any improvements on the services they receive from digital libraries. One trend used to improve digital services is through personalization. Up to now, the most common approach for personalization in digital libraries has been user-driven. Nevertheless, the design of efficient personalized services has to be done, at least in part, in an automatic way. In this context, machine learning techniques automate the process of constructing user models. This paper proposes a new approach to construct digital libraries that satisfy users necessity for information: Adaptive Digital Libraries, libraries that automatically learn user preferences and goals and personalize their interaction using this information.

E. Frias-martinez; G. Magoulas; S. Chen; R. Macredie

2006-01-01T23:59:59.000Z

112

A survey on communication networks for electric system automation  

Science Conference Proceedings (OSTI)

In today's competitive electric utility marketplace, reliable and real-time information become the key factor for reliable delivery of power to the end-users, profitability of the electric utility and customer satisfaction. The operational and commercial ... Keywords: Electric system automation, Internet based Virtual Private Network, Power line communication, Satellite communication, WiMAX, Wireless mesh networks, Wireless sensor networks

V. C. Gungor; F. C. Lambert

2006-05-01T23:59:59.000Z

113

Detecting and Forecasting Economic Regimes in Automated Exchanges  

E-Print Network (OSTI)

Detecting and Forecasting Economic Regimes in Automated Exchanges Wolfgang Ketter , John Collins. The agent can use this information to make both tactical decisions such as pricing and strategic decisions, such as over- supply or scarcity, from historical data using computational methods to construct price density

Ketter, Wolfgang

114

Automated hedcut illustration using isophotes  

Science Conference Proceedings (OSTI)

In this work, we present an automated system for creating hedcut illustrations, portraits rendered using small image feature aligned dots (stipples). We utilize edge detection and shading cues from the input photograph to direct stipple placement within ...

SungYe Kim; Insoo Woo; Ross Maciejewski; David S. Ebert

2010-06-01T23:59:59.000Z

115

Automated Assembly Using Feature Localization  

E-Print Network (OSTI)

Automated assembly of mechanical devices is studies by researching methods of operating assembly equipment in a variable manner; that is, systems which may be configured to perform many different assembly operations ...

Gordon, Steven Jeffrey

1986-12-01T23:59:59.000Z

116

Information engineering  

SciTech Connect

The Information Engineering thrust area develops information technology to support the programmatic needs of Lawrence Livermore National Laboratory`s Engineering Directorate. Progress in five programmatic areas are described in separate reports contained herein. These are entitled Three-dimensional Object Creation, Manipulation, and Transport, Zephyr:A Secure Internet-Based Process to Streamline Engineering Procurements, Subcarrier Multiplexing: Optical Network Demonstrations, Parallel Optical Interconnect Technology Demonstration, and Intelligent Automation Architecture.

Hunt, D.N.

1997-02-01T23:59:59.000Z

117

Certificates for Automated Clients Status of This Memo  

E-Print Network (OSTI)

This memo provides information to the Grid community regarding new class of certificates for automated Grid Clients. It does not define any standards or technical recommendations. Distribution is unlimited. Copyright Notice Copyright Global Grid Forum (2003). All Rights Reserved. In evaluating Grid technology for production use, several members of the DOESG community feel there is a need for another class of certificates to be used for authenticating automated clients that connect to Grid servers. The usage of these new certificates is different enough so that current CP policies will need to be updated. Contents

Stephen Chan Nersc/lbnl; Matt Crawford Fnal

2003-01-01T23:59:59.000Z

118

Corridor Rate Analysis Results - Energy Information Administration  

U.S. Energy Information Administration (EIA)

Energy Information Administration 113 ... with the pipeline company tariff rates obtained using the Federal Energy Regulatory Commission Automated System for Tariff

119

Building Energy Information Systems: User Case Studies  

E-Print Network (OSTI)

Web based enterprise energy and building automation systems.operations. Energy and Buildings, 33(8), 10. Heinemeier,from an analysis of building Energy Information System

Granderson, Jessica

2010-01-01T23:59:59.000Z

120

Open Automated Demand Response for Small Commerical Buildings  

E-Print Network (OSTI)

ofFullyAutomatedDemand ResponseinLargeFacilities. FullyAutomatedDemandResponseTestsinLargeFacilities. OpenAutomated DemandResponseCommunicationStandards:

Dudley, June Han

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Scenarios for Consuming Standardized Automated Demand Response Signals  

E-Print Network (OSTI)

of Fully Automated Demand Response in Large Facilities.Fully Automated Demand Response Tests in Large Facilities.Interoperable Automated Demand Response Infrastructure.

Koch, Ed

2009-01-01T23:59:59.000Z

122

Automation World Features New White Paper on Wireless Security...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Automation World Features New White Paper on Wireless Security Automation World Features New White Paper on Wireless Security The April 2009 issue of Automation World magazine...

123

title Automated Price and Demand Response Demonstration for Large Customers  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated Price and Demand Response Demonstration for Large Customers Automated Price and Demand Response Demonstration for Large Customers in New York City using OpenADR booktitle International Conference for Enhanced Building Operations ICEBO year month address Montreal Quebec abstract p class p1 Open Automated Demand Response OpenADR an XML based information exchange model is used to facilitate continuous price responsive operation and demand response participation for large commercial buildings in New York who are subject to the default day ahead hourly pricing We summarize the existing demand response programs in New York and discuss OpenADR communication prioritization of demand response signals and control methods Building energy simulation models are developed and field tests are conducted to evaluate continuous energy management

124

Automated Dna Curvature Profile Reconstruction In Atomic Force  

E-Print Network (OSTI)

An automated algorithm is presented to determine the DNA molecule intrinsic curvature profiles and the molecular spatial orientations in Atomic Force Microscope images. The curvature is composed by static and dynamic contributions. The first one is the intrinsic curvature, vectorial function of the DNA nucletide sequence, while the second one is due to thermal noise. This algorithm allows to reconstruct the intrinsic curvature profile excluding the thermal contribution and detects fragment orientation on AFM image with a percentage of molecular-orientation detection of 96.79 % for molecules with a high curvature peak. The automated approach allows to minimize the processing time compared to semi-automated methods, avoids errors introduced from operator bias and increases the amount of available information.

Microscope Images Elisa; Elisa Ficarra; Daniele Masotti; Luca Benini; Michela Milano

2002-01-01T23:59:59.000Z

125

PROBE: a feasibility demonstration of substation and distribution automation  

SciTech Connect

Substation and distribution automation has existed for a number of years with varying degrees of sophistication. Recently trial installations have been initiated utilizing digital computer technology and advanced electronics to accomplish automation of certain substation functions. Investigations are also under way of remote meter reading and customer load management. The PROBE project is a research investigation to determine the feasibility of sampling data and creation of a data base to achieve these functions using digital techniques. A key objective of PROBE is to demonstrate the feasibility of utilizing data base information to make sophisticated decisions automatically and achieve a degree of coordination between functions not hitherto attainable. The equipment used, test procedures and results are described. Experience from the PROBE feasibility demonstration and Phase 1 tests show that the described substation and distribution automation implementation techniques are viable.

Croghan, J.F. (Commonwealth Edison Co., Maywood, IL); Jenkins, D.R.; Rushden, F.A.; Bunch, J.B.; Gurr, G.P.

1977-01-01T23:59:59.000Z

126

Dynamic or Tiered Rates? Utility or Customer-Controlled Event Automation?  

NLE Websites -- All DOE Office Websites (Extended Search)

Dynamic or Tiered Rates? Utility or Customer-Controlled Event Automation? Dynamic or Tiered Rates? Utility or Customer-Controlled Event Automation? Speaker(s): Karen Herter Date: September 27, 2013 - 12:00pm - 1:00pm Location: 90-3122 Seminar Host/Point of Contact: Janie Page SMUD's 2011-2012 Residential Summer Solutions Study investigated the effects of real-time energy data and TOU-CPP rates in the presence of utility or customer controlled thermostat automation. Of the four rate and automation options offered, the TOU-CPP rate + customer-controlled automation provided the greatest savings, with 4% energy savings, daily weekday peak savings of more than 30%, and an average event peak load shed of nearly 60%. Effects of real-time information on these impacts were modest (1-7%), but in many cases statistically significant. On average,

127

IT-Security for Safety-Critical Automation Systems  

E-Print Network (OSTI)

The protection of safety-critical and infrastructure systems (such as automation systems for utilities, but also for manufacturing plants) against electronic and communication network based attacks becomes more and more important. This paper investigates how such safety-critical plants and automation systems can be secured against information system and network based attacks. The two common approaches, hard perimeter, and defense-in-depth are discussed. Based on the defense-in-depth approach, a conceptional, generic security zone model for use in analysis and synthesis of a plant security architecture is proposed, and for each of its zones a survey of the available and appropriate security mechanisms is given. Using an example from the substation automation domain, it is shown how threats and counter-measures can be systematically derived and how the specific system and usage characteristics of automation systems (or at least their restricted safety critical sub-functions) can be exploited in a positive way to deploy security mechanisms that would in this form not be available and applicable to home or office information systems. 1.

Martin Naedele

2002-01-01T23:59:59.000Z

128

Disciplined agility for process control & automation  

E-Print Network (OSTI)

Process automation vendors must consider agility as a basis to gain a competitive edge in innovation. Process Automation systems can impact the operating cost of manufacturing equipment, the safe control of large quantities ...

Tibazarwa, Augustine

2009-01-01T23:59:59.000Z

129

Automated Demand Response Opportunities in Wastewater Treatment Facilities  

E-Print Network (OSTI)

Interoperable Automated Demand Response Infrastructure,study of automated demand response in wastewater treatmentopportunities for demand response control strategies in

Thompson, Lisa

2008-01-01T23:59:59.000Z

130

AutoMed: an automated mediator for multi-issue bilateral negotiations  

Science Conference Proceedings (OSTI)

In this paper, we present AutoMed, an automated mediator for multi-issue bilateral negotiation under time constraints. AutoMed elicits the negotiators preferences and analyzes them. It monitors the negotiations and proposes possible solutions for resolving ... Keywords: Automated mediator, Experiments, Negotiation

Michal Chalamish; Sarit Kraus

2012-05-01T23:59:59.000Z

131

NISTIR 7511 Revision 1, Security Content Automation ...  

Science Conference Proceedings (OSTI)

... CONTENT AUTOMATION PROTOCOL (SCAP) VERSION 1.0 VALIDATION PROGRAM TEST REQUIREMENTS (DRAFT) XCCDF.V.2: The vendor ...

2013-04-29T23:59:59.000Z

132

Adaptable methodology for automation application development  

Science Conference Proceedings (OSTI)

An adaptable methodology for automation application development (AMAAD) is introduced. This development methodology is based on the key concept that design automation (DA) applications are a subset of higher level knowledge-based engineering (KBE) applications, ... Keywords: CommonKADS, Design automation, Knowledge-based engineering, MOKA, Productivity enhancement

Christian van der Velden; Cees Bil; Xinghuo Xu

2012-04-01T23:59:59.000Z

133

Collaborative Systems for Building Automation  

Science Conference Proceedings (OSTI)

This paper describes the use of new generation of PLC's and WinCC software in creating collaborative systems for managing, controlling and supervising building electric equipment. These systems assure all the requirements of a building and offer to the ... Keywords: Building Automation System, PLC, WinCC, Redundancy, HVAC, HAS, SCADA, HMI

Ioan Valentin Sita

2012-09-01T23:59:59.000Z

134

Automation ensures safety, extends production  

Science Conference Proceedings (OSTI)

This paper reviews some current improvements in offshore platform safety as a result of new regulations. In response to Norwegian Petroleum Directorate regulations limiting personnel on the rig floor, Weatherford Norway has developed a casing modem with remote-controlled power tongs. This paper reviews the various automated systems for handling drill pipes and joints on offshore platforms and how they work.

Perdue, J.M.

1996-06-01T23:59:59.000Z

135

Automated computation of scattering amplitudes  

E-Print Network (OSTI)

We review some of the recent advances in the computation of one-loop scattering amplitudes which led to the construction of efficient and automated computational tools for NLO predictions. Particular attention is devoted to unitarity-based methods and integrand-level reduction techniques. Extensions of one-loop integrand-level techniques to higher orders are also briefly illustrated.

Giovanni Ossola

2013-10-11T23:59:59.000Z

136

Fourth international symposium on distribution automation and demand side management (DA/DSM 94)  

SciTech Connect

This document is the conference proceedings from the 1994 Distribution Automation/Demand Side Management meeting in Orlando, Florida. There are 87 papers presented, and topics include: (1) improved feeder efficiency, (2) automation of older substations, (3) modeling tools for distribution, planning, and operations, (4) sensing and fault detection, (5) outage monitoring, (6) cost and benefits of distribution automation, (7) communications, (8) optimization of feeder systems operations, (9) information technology, (10) demand-side management applications in the industrial, commercial, and residential sectors, (11) pricing and regulation, and (12) applications to the natural gas industry.

NONE

1994-12-31T23:59:59.000Z

137

Opportunities for Open Automated Demand Response in Wastewater Treatment Facilities in California - Phase II Report. San Luis Rey Wastewater Treatment Plant Case Study  

SciTech Connect

This case study enhances the understanding of open automated demand response opportunities in municipal wastewater treatment facilities. The report summarizes the findings of a 100 day submetering project at the San Luis Rey Wastewater Treatment Plant, a municipal wastewater treatment facility in Oceanside, California. The report reveals that key energy-intensive equipment such as pumps and centrifuges can be targeted for large load reductions. Demand response tests on the effluent pumps resulted a 300 kW load reduction and tests on centrifuges resulted in a 40 kW load reduction. Although tests on the facility?s blowers resulted in peak period load reductions of 78 kW sharp, short-lived increases in the turbidity of the wastewater effluent were experienced within 24 hours of the test. The results of these tests, which were conducted on blowers without variable speed drive capability, would not be acceptable and warrant further study. This study finds that wastewater treatment facilities have significant open automated demand response potential. However, limiting factors to implementing demand response are the reaction of effluent turbidity to reduced aeration load, along with the cogeneration capabilities of municipal facilities, including existing power purchase agreements and utility receptiveness to purchasing electricity from cogeneration facilities.

Thompson, Lisa; Lekov, Alex; McKane, Aimee; Piette, Mary Ann

2010-08-20T23:59:59.000Z

138

A tool for automated resource consumption profiling of distributed transactions  

E-Print Network (OSTI)

Abstract. In this paper, we present a tool, called Autoprofiler, that automates the discovery of resource consumption by transactions on distributed systems. Such information is required as input to performance analysis tools, which may be used for capacity planning, for rearchitecting a distributed system, or to identify potential bottlenecks. Deriving this information using existing tools is a tedious and error prone process. In contrast, our tool requires minimal human intervention, and brings down the time required to profile complex distributed systems to a few minutes. It does this by co-ordinating the process of load generation and server resource profiling. Our tool also works with a Java profiler, called LiteJava Profiler, which we have built, to fully automate the process of resource consumption discovery for J2EE servers. 1

B. Nagaprabhanjan; Varsha Apte

2005-01-01T23:59:59.000Z

139

Rockwell Automation - Owens Corning Teaming Profile  

NLE Websites -- All DOE Office Websites (Extended Search)

Rockwell Automation Owens Corning Rockwell Automation Owens Corning 1201 S. Second Street 247 York Road Milwaukee, WI 53204 Guelph, Ontario N1E 3G4 Business: Industrial Automation Business: Textile / Fiber Nigel Hitchings Frank Peel Marketing Manager Electrical Support Specialist Phone: 508-357-8404 Phone: 519-823-7208 Email: nehitchings@ra.rockwell.com Email: frank.peel@owenscorning.com Owens Corning partners with Rockwell Automation to retrofit fans with VFDs, saving $67,000 annually Project Scope Owens Corning and Rockwell Automation installed Variable Frequency Drives (VFDs) on one 125HP cooling fan and three 40HP recirculation fans at the Owens Corning Guelph Glass Plant. The VFDs were integrated with the existing Rockwell Automation programmable automation controller to collect

140

Automated defect spatial signature analysis for semiconductor manufacturing process  

DOE Patents (OSTI)

An apparatus and method for performing automated defect spatial signature alysis on a data set representing defect coordinates and wafer processing information includes categorizing data from the data set into a plurality of high level categories, classifying the categorized data contained in each high level category into user-labeled signature events, and correlating the categorized, classified signature events to a present or incipient anomalous process condition.

Tobin, Jr., Kenneth W. (Harriman, TN); Gleason, Shaun S. (Knoxville, TN); Karnowski, Thomas P. (Knoxville, TN); Sari-Sarraf, Hamed (Knoxville, TN)

1999-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

National SCADA Test Bed Substation Automation Evaluation Report  

Science Conference Proceedings (OSTI)

Increased awareness of the potential for cyber attack has recently resulted in improved cyber security practices associated with the electrical power grid. However, the level of practical understanding and deployment of cyber security practices has not been evenly applied across all business sectors. Much of the focus has been centered on information technology business centers and control rooms. This report explores the current level of substation automation, communication, and cyber security protection deployed in electrical substations throughout existing utilities in the United States. This report documents the evaluation of substation automation implementation and associated vulnerabilities. This evaluation used research conducted by Newton-Evans Research Company for some of its observations and results. The Newton Evans Report aided in the determination of what is the state of substation automation in North American electric utilities. Idaho National Laboratory cyber security experts aided in the determination of what cyber vulnerabilities may pose a threat to electrical substations. This report includes cyber vulnerabilities as well as recommended mitigations. It also describes specific cyber issues found in typical substation automation configurations within the electric utility industry. The evaluation report was performed over a 5-month period starting in October 2008

Kenneth Barnes; Briam Johnson

2009-10-01T23:59:59.000Z

142

Automated Transportation Management System (ATMS)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Re evised June 2010 Re evised June 2010 Autom The Depa Transport an integra system al outbound air. Its ea 1989 DOE significant operationa commerce electronic rates, pre transporta users eva shipments opportunit logistics im ATMS is i radioactiv shipments System ATMS is a activities p packaging including materials. common s lading, fre * W * C S * A * H * E * * O 0 mated T artment of Ene tation Manage ated web-base lowing users freight shipm arly developm E Inspector G t opportunitie al efficiency t e. Today's sy cally prepare s pare shipping ation bills befo aluate carrier s, and use co ties for system mprovements ts capability t ve and other h s in a comple Modules a modular sys performed by g and transpo radioactive a . Its modules shipment info eight bills, rate System Web Applic Carrier Eval Selection Automated

143

AUTOMATING GROUNDWATER SAMPLING AT HANFORD THE NEXT STEP  

Science Conference Proceedings (OSTI)

Historically, the groundwater monitoring activities at the Department of Energy's Hanford Site in southeastern Washington State have been very "people intensive." Approximately 1500 wells are sampled each year by field personnel or "samplers." These individuals have been issued pre-printed forms showing information about the well(s) for a particular sampling evolution. This information is taken from 2 official electronic databases: the Hanford Well information System (HWIS) and the Hanford Environmental Information System (HEIS). The samplers used these hardcopy forms to document the groundwater samples and well water-levels. After recording the entries in the field, the samplers turned the forms in at the end of the day and other personnel posted the collected information onto a spreadsheet that was then printed and included in a log book. The log book was then used to make manual entries of the new information into the software application(s) for the HEIS and HWIS databases. A pilot project for automating this extremely tedious process was lauched in 2008. Initially, the automation was focused on water-level measurements. Now, the effort is being extended to automate the meta-data associated with collecting groundwater samples. The project allowed electronic forms produced in the field by samplers to be used in a work flow process where the data is transferred to the database and electronic form is filed in managed records - thus eliminating manually completed forms. Elimating the manual forms and streamlining the data entry not only improved the accuracy of the information recorded, but also enhanced the efficiency and sampling capacity of field office personnel.

CONNELL CW; CONLEY SF; HILDEBRAND RD; CUNNINGHAM DE; R_D_Doug_Hildebrand@rl.gov; DeVon_E_Cunningham@rl.gov

2010-01-21T23:59:59.000Z

144

Instrumentation, Controls, and Automation Newsletter  

Science Conference Proceedings (OSTI)

This is the first newsletter for the Instrumentation, Controls, and Automation program of EPRI. This newsletter summarizes results of past and current projects and provides an overview of projects that will be completed in 2010. The first article describes the recently prototyped software Asset Fault Signature Database. The second article, "Inter-Control Center Communications Protocol Benefits Assessment," describes a previously completed EPRI/Southern Company tailored collaboration project. "Survey of C...

2009-12-22T23:59:59.000Z

145

Guidelines for Planning Interoperable Distribution Automation Systems  

Science Conference Proceedings (OSTI)

Fully integrated distribution automation is a relatively new challenge for the utility industry, and the full range of new capabilities it enables are not well understood. In addition, developing an overall strategy to long-term automation integration and deployment through the use of open standards adds to the challenge. These guidelines were developed to describe the overall vision of distribution automation and to assist in application of emerging open standards to the procurement and integration of a...

2004-04-26T23:59:59.000Z

146

Automated Surface Observing System: Standby Power Options  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated Automated Surface Observing System Standby Options Power Automated Surface Observing System (ASOS) General System Description * Self contained group of sensors and data gathering equipment that produces an automated weather observation * Weather observations support aviation, climate data, non government weather operations, public consumption, etc. * Initial deployment began in 1991 and continued through 1997 * Located at 884 sites nationwide, normally at airports * System has two distinct subsystems: Field installed equipment (DCP & Sensor Group) and an indoor processor (ACU) with peripherals * Separate facility power for DCP & Sensors and ACU 1 * measure and collect data * Located on the airport * back up group for 10 minutes * Currently pl

147

Automated fenestration selection based on lighting performance...  

NLE Websites -- All DOE Office Websites (Extended Search)

i.e., aims at automated selection of fenestration systems that best meet specific lighting performance goals. The new method is based on manipulation of matrices that represent...

148

Next-Generation Robotics and Automation  

Science Conference Proceedings (OSTI)

... NIST activities led to the approval of a new IEEE Robotics and Automation Society Standards Working Group on ... Lead Organizational Unit: el. Staff: ...

2013-01-10T23:59:59.000Z

149

Building Technologies Office: Distributed Intelligent-Automated...  

NLE Websites -- All DOE Office Websites (Extended Search)

Distributed Intelligent-Automated Demand Response Building Management System Research Project to someone by E-mail Share Building Technologies Office: Distributed...

150

Automated Demand Response Technology Demonstration Project for...  

NLE Websites -- All DOE Office Websites (Extended Search)

Demonstration Project for Small and Medium Commercial Buildings Title Automated Demand Response Technology Demonstration Project for Small and Medium Commercial Buildings...

151

Substation automation gains momentum with modern options  

SciTech Connect

This paper discusses issues associated with utility substation automation. Monitoring equipment for monitoring power flow, quality, and harmonics for three substations simultaneously is described.

Beaty, W.

1996-12-01T23:59:59.000Z

152

Automated Continuous Commissioning of Commercial Buildings  

E-Print Network (OSTI)

Conference on Building Commissioning. San Francisco, CA. 17.Commercial Buildings Commissioning, LBNL- 56637, Nov. 2004.Automated Continuous Commissioning Tool GUI Screenshots from

Bailey, Trevor

2013-01-01T23:59:59.000Z

153

Home Network Technologies and Automating Demand Response  

E-Print Network (OSTI)

networks_in_the_home_the_new_growth_market.htm [12] NationalHome Network Technologies and Automating Demand Responsethe University of California. Home Network Technologies and

McParland, Charles

2010-01-01T23:59:59.000Z

154

Automated Transmission Kikuchi Diffraction for Nanomaterials ...  

Science Conference Proceedings (OSTI)

Presentation Title, Automated Transmission Kikuchi Diffraction for Nanomaterials Characterization in the SEM. Author(s), Scott Sitzman. On-Site Speaker...

155

Automated micro-tracking planar solar concentrators  

E-Print Network (OSTI)

Photonics) University of California, San Diego, 2011UNIVERSITY OF CALIFORNIA, SAN DIEGO Automated Micro-TrackingChair University of California, San Diego iii DEDICATION To

Hallas, Justin Matthew

2011-01-01T23:59:59.000Z

156

REMOTE LABORATORIES IN AUTOMATION: AIP-PRIMECA RAO ARI PLATFORM Remote Laboratories in Automation  

E-Print Network (OSTI)

Terms -- Education, Laboratories, Manufacturing automation, Remote handling I.INTRODUCTION For a fewREMOTE LABORATORIES IN AUTOMATION: AIP-PRIMECA RAO ARI PLATFORM Remote Laboratories in Automation learners to train themselves on remote real or virtual systems. They represent essential components in e

Paris-Sud XI, Université de

157

IT Security for Automation Systems Motivations and Mechanisms  

E-Print Network (OSTI)

The protection of safety-critical and infrastructure systems (such as automation systems for utilities, but also for manufacturing plants) against electronic and communication network based attacks becomes more and more important. This paper examines how such safety-critical plants and automation systems can be secured against information system and network based attacks. Based on the defense-in-depth approach, a conceptional, generic security zone model for use in analysis and synthesis of a plant security architecture is proposed, and for each of its zones a survey of the available and appropriate security mechanisms for delay, detection, and reaction is given. Der Schutz von sicherheitskritischen Systemen und Infrastruktureinrichtungen (wie zum Beispiel der Automatisierungsanlagen von Versorgungsunternehmen, aber auch von Fabrikationsanlagen) gegen

Martin Naedele; Abb Schweiz Ag

2004-01-01T23:59:59.000Z

158

NETL Crosscutting: Instrumentation, Controls & Automation Interest Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Research Advanced Research 2012 Conference Proceedings Instrumentation, Controls & Automation Interest Group Meeting June 6-7, 2012 The Department of Energy National Energy Technology Laboratory Crosscutting Research program and the Electric Power Research Institute (EPRI) together hosted the Instrumentation, Controls, and Automation Interest Group Meeting to address sensors and controls research for the power industry. This meeting was held in conjunction with the 2012 ISA POWID Conference on June 6-7, 2012. The goal was to share ongoing research activities, exchange ideas and collect information from power industry to identify potential future topics that can be used in new solicitation. Several topics were covered to stimulate discussion in areas that included wireless technologies, fiber optic sensors, model based control, cyber security and advances in sensors. The interactive discussions were captured, and can be accessed in the meeting notes [PDF-149KB].

159

Automating the determination of 3D protein structure  

SciTech Connect

The creation of an automated method for determining 3D protein structure would be invaluable to the field of biology and presents an interesting challenge to computer science. Unfortunately, given the current level of protein knowledge, a completely automated solution method is not yet feasible, therefore, our group has decided to integrate existing databases and theories to create a software system that assists X-ray crystallographers in specifying a particular protein structure. By breaking the problem of determining overall protein structure into small subproblems, we hope to come closer to solving a novel structure by solving each component. By generating necessary information for structure determination, this method provides the first step toward designing a program to determine protein conformation automatically.

Rayl, K.D.

1993-12-31T23:59:59.000Z

160

Automated fuel pin loading system  

DOE Patents (OSTI)

An automated loading system for nuclear reactor fuel elements utilizes a gravity feed conveyor which permits individual fuel pins to roll along a constrained path perpendicular to their respective lengths. The individual lengths of fuel cladding are directed onto movable transports, where they are aligned coaxially with the axes of associated handling equipment at appropriate production stations. Each fuel pin can be reciprocated axially and/or rotated about its axis as required during handling steps. The fuel pins are inserted as a batch prior to welding of end caps by one of two disclosed welding systems.

Christiansen, David W. (Kennewick, WA); Brown, William F. (West Richland, WA); Steffen, Jim M. (Richland, WA)

1985-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Automate feeders to improve reliability  

SciTech Connect

Pacific Gas and Electric Co. (PG and E) improved system reliability and saved money with an alarm and control system for substation distribution switches using remote control by standard telephone-communication links. The method is especially well suited for urban and suburban areas with independent telephone and power systems. The automated systems can also add capability to areas now limited by the emergency capability. The primary distribution alarm and control system has both a substation and a field switch element. Photographs accompanying the description help to explain how the controls work. 7 figures. (DCK)

1981-01-01T23:59:59.000Z

162

Human-automation interaction for lunar landing aimpoint redesignation  

E-Print Network (OSTI)

Human-automation interactions are a critical area of research in systems with modem automation. The decision-making portion of tasks presents a special challenge for human-automation interactions because of the many factors ...

Needham, Jennifer M

2008-01-01T23:59:59.000Z

163

Concepts of User Centered Automation  

E-Print Network (OSTI)

The accident statistics of large technical systems have been steadily improved during the last decades. Also the number of fatal accidents in air and surface transportation is decreasing in spite off increased traffic. However, the relative share of so called human errors is increasing across application areas. Hence, for further improved reliability, the functional integration of humans in such systems must be reconsidered. Since the user, in the long run, will not and should not be eliminated by computers this paper reviews basic requirements of a human centered automation. Following an analysis of generic system functions, human factors requirements for automated functions are defined. It is shown how manual functions can be supported by assistance functions, for which a general system architecture and a classification scheme are presented. # 2001 ditions scientifiques et mdicales Elsevier SAS Zusammenfassung Die Unfallstatistiken grotechnischer Systeme haben sich in den letzten Jahrzehnten stndig verbessert, auch die Anzahl der Unflle mit Todesfolge im Luft- und Straenverkehr sinkt bei wachsendem Verkehrsaufkommen stetig. Der relative Anteil sogenannter menschlicher Fehler nimmt dagegen in allen Bereichen zu. Es besteht somit Anla, die Rolle des Menschen in derartigen Systemen neu zu berdenken, um die Zuverl ssigkeit komplexer Systeme weiter zu erhhen. Da der Benutzer auf lange Sicht nicht durch Rechner eliminiert werden kann und soll, untersucht dieser Beitrag die Erfordernisse einer benutzergerechten Automatisierung. Nach einer einleitenden Analyse grundlegender Systemfunktionen, der Automatisierungsgrenzen und der Leistungsdefizite des Menschen werden mgliche Formen und Strategien der Funktionsteilung zwischen Automatik und Benutzer hergeleitet. Zur Untersttzung...

Karl-friedrich Kraiss; Nico Hamacher

2001-01-01T23:59:59.000Z

164

Substation Integrated Automation System Based on DSP  

Science Conference Proceedings (OSTI)

This Paper introduces the application of digital signal processor (DSP) at Substation Integrated Automation System. Using the powerful digital signal processing capability of DSP, high-speed multi-channel data acquisition function, and excellent data ... Keywords: Substation, Digital Signal Processor, Integrated Automation System

Yanzhe Li; Duowang Fan; Xuwei Dong

2009-08-01T23:59:59.000Z

165

Findings from the 2004 Fully Automated Demand Response Tests...  

NLE Websites -- All DOE Office Websites (Extended Search)

the 2004 Fully Automated Demand Response Tests in Large Facilities Title Findings from the 2004 Fully Automated Demand Response Tests in Large Facilities Publication Type Report...

166

Demand Response and Open Automated Demand Response Opportunities...  

NLE Websites -- All DOE Office Websites (Extended Search)

Response and Open Automated Demand Response Opportunities for Data Centers Title Demand Response and Open Automated Demand Response Opportunities for Data Centers Publication Type...

167

A Demand Response (DR) Event: Benefits, Strategies, Automation...  

NLE Websites -- All DOE Office Websites (Extended Search)

A Demand Response (DR) Event: Benefits, Strategies, Automation and Future of DR Title A Demand Response (DR) Event: Benefits, Strategies, Automation and Future of DR Publication...

168

Design and Operation of an Open, Interoperable Automated Demand...  

NLE Websites -- All DOE Office Websites (Extended Search)

Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings Title Design and Operation of an Open, Interoperable Automated...

169

Demand Response and Open Automated Demand Response Opportunities...  

NLE Websites -- All DOE Office Websites (Extended Search)

Demand Response and Open Automated Demand Response Opportunities for Data Centers Title Demand Response and Open Automated Demand Response Opportunities for Data Centers...

170

Results and commissioning issues from an automated demand response pilot  

E-Print Network (OSTI)

of Fully Automated Demand Response in Large Facilities"Management and Demand Response in Commercial Buildings", L Band Commissioning Issues from an Automated Demand Response.

Piette, Mary Ann; Watson, Dave; Sezgen, Osman; Motegi, Naoya

2004-01-01T23:59:59.000Z

171

Findings from Seven Years of Field Performance Data for Automated...  

NLE Websites -- All DOE Office Websites (Extended Search)

Seven Years of Field Performance Data for Automated Demand Response in Commercial Buildings Title Findings from Seven Years of Field Performance Data for Automated Demand Response...

172

Open Automated Demand Response Dynamic Pricing Technologies and Demonstration  

E-Print Network (OSTI)

Goodin. 2009. Open Automated Demand Response Communicationsin Demand Response for Wholesale Ancillary Services. InOpen Automated Demand Response Demonstration Project. LBNL-

Ghatikar, Girish

2010-01-01T23:59:59.000Z

173

Field Demonstration of Automated Demand Response for Both Winter...  

NLE Websites -- All DOE Office Websites (Extended Search)

Demonstration of Automated Demand Response for Both Winter and Summer Events in Large Buildings in the Pacific Northwest Title Field Demonstration of Automated Demand Response for...

174

Field Testing of Automated Demand Response for Integration of...  

NLE Websites -- All DOE Office Websites (Extended Search)

Field Testing of Automated Demand Response for Integration of Renewable Resources in California's Ancillary Services Market for Regulation Products Title Field Testing of Automated...

175

Fast Automated Demand Response to Enable the Integration of Renewable...  

NLE Websites -- All DOE Office Websites (Extended Search)

Fast Automated Demand Response to Enable the Integration of Renewable Resources Title Fast Automated Demand Response to Enable the Integration of Renewable Resources Publication...

176

Open Automated Demand Response Communications Specification (Version 1.0)  

E-Print Network (OSTI)

and Techniques for Demand Response. May 2007. LBNL-59975.tofacilitateautomating demandresponseactionsattheInteroperable Automated Demand Response Infrastructure,

Piette, Mary Ann

2009-01-01T23:59:59.000Z

177

Microsoft Word - Wireless Automation World for OE FINAL.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Automation World Features New White Paper on Wireless Security, Interviews Authors April 16, 2009 The April 2009 issue of Automation World magazine features the white paper...

178

Computer Measurement and Automation System for Gas-fired Heating...  

NLE Websites -- All DOE Office Websites (Extended Search)

Computer Measurement and Automation System for Gas-fired Heating Furnace Title Computer Measurement and Automation System for Gas-fired Heating Furnace Publication Type Journal...

179

V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities July 29, 2013...

180

Automated-Manual Transitions: Human Capabilities and Adaptive Cruise Control  

E-Print Network (OSTI)

TRANSIT AND HIGHWAYS Automated-Manual Transitions: HumanOF CALIFORNIA, BERKELEY Automated-Manual Transitions: HumanSuch systems will supplant manual controls during certain

Barton, Joseph E.; Cohn, Theodore E.; Nguyen, Khoi M.; Nguyen, Tieuvi; Toyofuku, Natsuko

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Mixed Manual/Semi-Automated Traffic: A Macroscopic Analysis  

E-Print Network (OSTI)

of Traffic Flow with Mixed Manual and Semi- Automatedof Mixed Semi-Automated/Manual Traffic, SAE Technical Paperof traffic flow with mixed manual and semi- automated

Bose, Arnab; Ioannou, Petros

2001-01-01T23:59:59.000Z

182

ISA Approves Standard for Wireless Automation in Process Control...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications On September 9, the...

183

Dynamic Whitelist Generation for Automated Response  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Methodology Methodology Results Dynamic Whitelist Generation for Automated Response Chris Strasburg, Josh Adams Ames Laboratory, US DOE cstras@ameslab.gov, jadams@ameslab.gov The Ames Laboratory, US DOE 1 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results Outline 1 Introduction About Ames Laboratory Motivation 2 Methodology Data Classifiers Experiments 3 Results The Ames Laboratory, US DOE 2 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results About Ames Laboratory Motivation Ames Physical Environment The Ames Laboratory, US DOE 3 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results About Ames Laboratory Motivation Ames Network Environment The Ames Laboratory, US DOE 4 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results About Ames

184

Take an integrated approach to refinery automation  

Science Conference Proceedings (OSTI)

An integrated approach to designing refinery automation systems is essential to guaranteeing systems compatibility and maximizing benefits. Several aspects of implementing integrated refinery automation should be considered early in the project. Many refineries have major parts of their business automated, starting from corporate planning at the higher level, down to DCS and field instrumentation. A typical refinery automation system architecture of the mid-eighties is shown. Automation systems help refineries improve their business through: Rationalization of man power; Increased throughputs; Reduced give-away; Reduced energy consumption; Better response to market demands and changes; Effective use of offsite areas through scheduling and automatic line-up systems; Reduced losses; and Decision support systems.

Wadi, I. (Abu Dhabi National Oil Co. (United Arab Emirates))

1993-09-01T23:59:59.000Z

185

Automated Galaxy Morphology: A Fourier Approach  

E-Print Network (OSTI)

We use automated surface photometry and pattern classification techniques to morphologically classify galaxies. The two-dimensional light distribution of a galaxy is reconstructed using Fourier series fits to azimuthal profiles computed in concentric elliptical annuli centered on the galaxy. Both the phase and amplitude of each Fourier component have been studied as a function of radial bin number for a large collection of galaxy images using principal component analysis. We find that up to 90 percent of the variance in many of these Fourier profiles may be characterized in as few as 3 principal components and their use substantially reduces the dimensionality of the classification problem. We use supervised learning methods in the form of artificial neural networks to train galaxy classifiers that detect morphological bars at the 85-90 percent confidence level and can identify the Hubble type with a 1-sigma scatter of 1.5 steps on the 16-step stage axis of the revised Hubble system. Finally, we systematically characterize the adverse effects of decreasing resolution and S/N on the quality of morphological information predicted by these classifiers.

S. C. Odewahn; S. H. Cohen; R. A. Windhorst; N. S. Philip

2001-10-11T23:59:59.000Z

186

Magnetic Resonance Connectome Automated Pipeline  

E-Print Network (OSTI)

This manuscript presents a novel, tightly integrated pipeline for estimating a connectome, which is a comprehensive description of the neural circuits in the brain. The pipeline utilizes magnetic resonance imaging (MRI) data to produce a high-level estimate of the structural connectivity in the human brain. The Magnetic Resonance Connectome Automated Pipeline (MRCAP) is efficient and its modular construction allows researchers to modify algorithms to meet their specific requirements. The pipeline has been validated and over 200 connectomes have been processed and analyzed to date. This tool enables the prediction and assessment of various cognitive covariates, and this research is applicable to a variety of domains and applications. MRCAP will enable MR connectomes to be rapidly generated to ultimately help spur discoveries about the structure and function of the human brain.

Gray, William R; Vogelstein, Joshua T; Landman, Bennett A; Prince, Jerry L; Vogelstein, R Jacob

2011-01-01T23:59:59.000Z

187

Automated Fresnel lens tester system  

DOE Green Energy (OSTI)

An automated data collection system controlled by a desktop computer has been developed for testing Fresnel concentrators (lenses) intended for solar energy applications. The system maps the two-dimensional irradiance pattern (image) formed in a plane parallel to the lens, whereas the lens and detector assembly track the sun. A point detector silicon diode (0.5-mm-dia active area) measures the irradiance at each point of an operator-defined rectilinear grid of data positions. Comparison with a second detector measuring solar insolation levels results in solar concentration ratios over the image plane. Summation of image plane energies allows calculation of lens efficiencies for various solar cell sizes. Various graphical plots of concentration ratio data help to visualize energy distribution patterns.

Phipps, G.S.

1981-07-01T23:59:59.000Z

188

Automated cleaning of electronic components  

SciTech Connect

Environmental and operator safety concerns are leading to the elimination of trichloroethylene and chlorofluorocarbon solvents in cleaning processes that remove rosin flux, organic and inorganic contamination, and particulates from electronic components. Present processes depend heavily on these solvents for manual spray cleaning of small components and subassemblies. Use of alternative solvent systems can lead to longer processing times and reduced quality. Automated spray cleaning can improve the quality of the cleaning process, thus enabling the productive use of environmentally conscious materials, while minimizing personnel exposure to hazardous materials. We describe the development of a prototype robotic system for cleaning electronic components in a spray cleaning workcell. An important feature of the prototype system is the capability to generate the robot paths and motions automatically from the CAD models of the part to be cleaned, and to embed cleaning process knowledge into the automatically programmed operations.

Drotning, W.; Meirans, L.; Wapman, W.; Hwang, Y.; Koenig, L.; Petterson, B.

1994-07-01T23:59:59.000Z

189

Automated Comparison of Building Energy Simulation Engines (Presentation)  

SciTech Connect

This presentation describes the BEopt comparative test suite, which is a tool that facilitates the automated comparison of building energy simulation engines. It also demonstrates how the test suite is improving the accuracy of building energy simulation programs. Building energy simulation programs inform energy efficient design for new homes and energy efficient upgrades for existing homes. Stakeholders rely on accurate predictions from simulation programs. Previous research indicates that software tends to over-predict energy usage for poorly-insulated leaky homes. NREL is identifying, investigating, and resolving software inaccuracy issues. Comparative software testing is one method of many that NREL uses to identify potential software issues.

Polly, B.; Horowitz, S.; Booten, B.; Kruis, N.; Christensen, C.

2012-08-01T23:59:59.000Z

190

Process development for automated solar cell and module production. Task 4: automated array assembly  

DOE Green Energy (OSTI)

The scope of work under this contract involves specifying a process sequence which can be used in conjunction with automated equipment for the mass production of solar cell modules for terrestrial use. This process sequence is then critically analyzed from a technical and economic standpoint to determine the technological readiness of each process step for implementation. The process steps are ranked according to the degree of development effort required and according to their significance to the overall process. Under this contract the steps receiving analysis were: back contact metallization, automated cell array layup/interconnect, and module edge sealing. For automated layup/interconnect both hard automation and programmable automation (using an industrial robot) were studied. The programmable automation system was then selected for actual hardware development. Economic analysis using the SAMICS system has been performed during these studies to assure that development efforts have been directed towards the ultimate goal of price reduction. Details are given. (WHK)

Hagerty, J.J.

1980-06-30T23:59:59.000Z

191

Fueling Robot Automates Hydrogen Hose Reliability Testing (Fact Sheet)  

SciTech Connect

Automated robot mimics fueling action to test hydrogen hoses for durability in real-world conditions.

Harrison, K.

2014-01-01T23:59:59.000Z

192

Automated container transport system between inland port and terminals  

Science Conference Proceedings (OSTI)

In this article we propose a new concept called automated container transportation system between inland port and terminals (ACTIPOT) which involves the use of automated trucks to transfer containers between an inland port and container terminals. The ... Keywords: Automated container transportation system, Petri nets, automated truck, supervisory control, vehicle control

Jianlong Zhang; Petros A. Ioannou; Anastasios Chassiakos

2006-04-01T23:59:59.000Z

193

Participation through Automation: Fully Automated Critical Peak Pricing in Commercial Buildings  

E-Print Network (OSTI)

2004. Working Group 2 Demand Response Evaluation Program2006. Au tomated Demand Response Control Strategies inrequired. Figure 2. Demand Response Automation Server and

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Kiliccote, Sila; Linkugel, Eric

2006-01-01T23:59:59.000Z

194

Automation of Capacity Bidding with an Aggregator Using Open Automated Demand Response  

E-Print Network (OSTI)

ProjectCommittee135 CapacityBiddingProgram ClientandREPORT AUTOMATION OF CAPACITY BIDDING WITH AN AGGREGATORDevelopmentandTestingoftheCapacityBiddingProgramfor

Kiliccote, Sila

2011-01-01T23:59:59.000Z

195

Definition: Automated Distribution Circuit Switches | Open Energy  

Open Energy Info (EERE)

Circuit Switches Circuit Switches Jump to: navigation, search Dictionary.png Automated Distribution Circuit Switches Distribution circuit switches that can be operated automatically in response to control signals from local sensors, distribution automation systems, or grid control systems. Such switches can be installed as automated devices or existing equipment can be retrofitted with controls and communications. The degree of automation depends on the controls and communications system implemented. These switches can be opened or closed to isolate portions of a distribution circuit that has experienced a short circuit (fault), or must be taken out of service for maintenance or other operations. When used in combination, these switches can reroute power from other substations or nearby distribution circuits.[1]

196

LANL to certify automated influenza surveillance system  

NLE Websites -- All DOE Office Websites (Extended Search)

LANL to certify automated influenza surveillance system LANL to certify automated influenza surveillance system LANL to certify automated influenza surveillance system A compact automated system for surveillance and screening of potential pandemic strains of influenza and other deadly infectious diseases is a step closer to reality. January 31, 2011 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy

197

The Automated Tropical Cyclone Forecasting System (ATCF)  

Science Conference Proceedings (OSTI)

The U.S. Navy Automated Tropical Cyclone Forecasting System (ATCF) is an IBM-AT compatible software package developed for the Joint Typhoon Warning Center (JTWC), Guam. ATCF is designed to assist forecasters with the process of making tropical ...

Ronald J. Miller; Ann J. Schrader; Charles R. Sampson; Ted L. Tsui

1990-12-01T23:59:59.000Z

198

Distributed Intelligent Automated Demand Response (DIADR) Building  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Distributed Intelligent Automated Demand Distributed Intelligent Automated Demand Response (DIADR) Building Management System Distributed Intelligent Automated Demand Response (DIADR) Building Management System The U.S. Department of Energy (DOE) is currently conducting research into distributed intelligent-automated demand response (DIADR) building management systems. Project Description This project aims to develop a DIADR building management system with intelligent optimization and control algorithms for demand management, taking into account a multitude of factors affecting cost including: Comfort Heating, ventilating, and air conditioning (HVAC) Lighting Other building systems Climate Usage and occupancy patterns. The key challenge is to provide the demand response the ability to address more and more complex building systems that include a variety of loads,

199

Automated Demand Response for Critical Peak Pricing  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated Demand Response for Critical Peak Pricing Speaker(s): Naoya Motegi Date: June 9, 2005 - 12:00pm Location: Bldg. 90 California utilities have been exploring the use of...

200

Design automation for microfluidics-based biochips  

Science Conference Proceedings (OSTI)

Advances in microfluidics technology offer exciting possibilities in the realm of enzymatic analysis, DNA analysis, proteomic analysis involving proteins and peptides, immunoassays, implantable drug delivery devices, and environmental toxicity monitoring. ... Keywords: Microfluidics, biochips, design automation

Krishnendu Chakrabarty; Jun Zeng

2005-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Automated Speech Recognition in air traffic control  

E-Print Network (OSTI)

Over the past few years, the technology and performance of Automated Speech Recognition (ASR) systems has been improving steadily. This has resulted in their successful use in a number of industrial applications. Motivated ...

Trikas, Thanassis

1987-01-01T23:59:59.000Z

202

Robust Automated Quality Assurance of Radiosonde Temperatures  

Science Conference Proceedings (OSTI)

This paper presents a description of the fully automated quality-assurance (QA) procedures that are being applied to temperatures in the Integrated Global Radiosonde Archive (IGRA). Because these data are routinely used for monitoring variations ...

Imke Durre; Russell S. Vose; David B. Wuertz

2008-08-01T23:59:59.000Z

203

An Evaluation of Inspection Automation Tools  

Science Conference Proceedings (OSTI)

A key element in manufacturing quality software is the early detection of defects which can be fostered by inspection techniques. Inspections may be boosted by automated tools that help in various tasks during the whole inspection process. We present ...

Vesa Tenhunen; Jorma Sajaniemi

2002-06-01T23:59:59.000Z

204

Essays on impact of information technology  

E-Print Network (OSTI)

The five essays in this dissertation look at how specific information technologies (such as Electronic Document Management (EDM), Semantic Web and RuleML) and IT in general can be used to automate and standardize data and ...

Bhansali, Sumit Milap

2007-01-01T23:59:59.000Z

205

Assessment of Wireless Technologies for Advanced Automation  

Science Conference Proceedings (OSTI)

The power industry is seeing a resurgence of interest in advanced automation and customer communications. A variety of wireless technologies are becoming available that could be used in advanced automation applications for utilities. However, decisions on physical media infrastructure should be made cautiously since use of these technologies may directly impact system performance, reliability, and long-term costs. This report is a preliminary analysis of some of the leading wireless technologies that are...

2007-12-20T23:59:59.000Z

206

Scientific Process Automation Improves Data Interaction  

SciTech Connect

This is an article written for the September 09 Scientific Computing magazine about the work of the Scientific Process Automation team of The U.S. Department of Energy (DOE) Scientific Discovery through Advanced Computing (SciDAC) program. The SPA team is focused on developing and deploying automated workflows for a variety of computational science domains. Scientific workflows are the formalization of a scientific process that is frequently and repetitively performed.

Critchlow, Terence J.

2009-09-30T23:59:59.000Z

207

Automated Centrifugal Chiller Diagnostician - Energy ...  

oil & gas; More Information. This technology is protected under copyright granted through the U.S. Copyright Office. Technology Status. Technology ID Development Stage

208

Automated Parallel Capillary Electrophoretic System  

DOE Patents (OSTI)

An automated electrophoretic system is disclosed. The system employs a capillary cartridge having a plurality of capillary tubes. The cartridge has a first array of capillary ends projecting from one side of a plate. The first array of capillary ends are spaced apart in substantially the same manner as the wells of a microtitre tray of standard size. This allows one to simultaneously perform capillary electrophoresis on samples present in each of the wells of the tray. The system includes a stacked, dual carousel arrangement to eliminate cross-contamination resulting from reuse of the same buffer tray on consecutive executions from electrophoresis. The system also has a gel delivery module containing a gel syringe/a stepper motor or a high pressure chamber with a pump to quickly and uniformly deliver gel through the capillary tubes. The system further includes a multi-wavelength beam generator to generate a laser beam which produces a beam with a wide range of wavelengths. An off-line capillary reconditioner thoroughly cleans a capillary cartridge to enable simultaneous execution of electrophoresis with another capillary cartridge. The streamlined nature of the off-line capillary reconditioner offers the advantage of increased system throughput with a minimal increase in system cost.

Li, Qingbo (State College, PA); Kane, Thomas E. (State College, PA); Liu, Changsheng (State College, PA); Sonnenschein, Bernard (Brooklyn, NY); Sharer, Michael V. (Tyrone, PA); Kernan, John R. (Loganton, PA)

2000-02-22T23:59:59.000Z

209

Facility automation for retail facilities  

Science Conference Proceedings (OSTI)

This article will focus on retail chain stores with areas of 22,000 to 75,000 sq ft, but much of the article will apply to all retail stores independent of size. Typically, a store is serviced by 5 to 15 rooftop HVAC units with a total cooling capacity of 50 to 150 tons, depending on the floor area and geographic location. The interior lighting represents a load of 80 to 300 KW with three lighting levels--retail, stocking, and security or night. Most stores are located in strip centers, and therefore, the parking lot lighting is provided by the landlord, but each store does control and service its own sign lighting. Generally, the total load controlled by an FAS represents 130 to 450 KW with corresponding annual energy costs ranging from $65,000 to $200,000 (natural gas and electricity), depending on the size of the store and the local unit costs of energy. Historical utility data, electrical and mechanical drawings, site surveys, significant analyses of data, and most importantly, discussions with corporate facilities management personnel and store operations personnel provide the source for the development theory and sequence of operation of the design of the facility automation systems for retail stores. The three main goals of an FAS are: reduce utility operating costs, maintain comfort levels during occupied hours, reduce HVAC maintenance costs.

Ameduri, G. (Roth Bros., Inc., Youngstown, OH (United States). Facilities Automation Division)

1994-12-01T23:59:59.000Z

210

Neutron Scattering Experiment Automation with Python  

Science Conference Proceedings (OSTI)

The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory currently holds the Guinness World Record as the world most powerful pulsed spallation neutron source. Neutrons scattered off atomic nuclei in a sample yield important information about the position, motions, and magnetic properties of atoms in materials. A neutron scattering experiment usually involves sample environment control (temperature, pressure, etc.), mechanical alignment (slits, sample and detector position), magnetic field controllers, neutron velocity selection (choppers) and neutron detectors. The SNS Data Acquisition System (DAS) consists of real-time sub-system (detector read-out with custom electronics, chopper interface), data preprocessing (soft real-time) and a cluster of control and ancillary PCs. The real-time system runs FPGA firmware and programs running on PCs (C++, LabView) typically perform one task such as motor control and communicate via TCP/IP networks. PyDas is a set of Python modules that are used to integrate various components of the SNS DAS system. It enables customized automation of neutron scattering experiments in a rapid and flexible manner. It provides wxPython GUIs for routine experiments as well as IPython command line scripting. Matplotlib and numpy are used for data presentation and simple analysis. We will present an overview of SNS Data Acquisition System and PyDas architectures and implementation along with the examples of use. We will also discuss plans for future development as well as the challenges that have to be met while maintaining PyDas for 20+ different scientific instruments.

Zolnierczuk, Piotr A [ORNL; Riedel, Richard A [ORNL

2010-01-01T23:59:59.000Z

211

Open Automated Demand Response Technologies for Dynamic Pricing and Smart Grid  

E-Print Network (OSTI)

for Automated Demand Response in Commercial Buildings. In2010. Open Automated Demand Response Dynamic Pricing2009. Open Automated Demand Response Communications

Ghatikar, Girish

2010-01-01T23:59:59.000Z

212

TY CONF T1 Automated Price and Demand Response Demonstration for Large Customers  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated Price and Demand Response Demonstration for Large Customers Automated Price and Demand Response Demonstration for Large Customers in New York City using OpenADR T2 International Conference for Enhanced Building Operations ICEBO A1 Joyce Jihyun Kim A1 Rongxin Yin A1 Sila Kiliccote AB p class p1 Open Automated Demand Response OpenADR an XML based information exchange model is used to facilitate continuous price responsive operation and demand response participation for large commercial buildings in New York who are subject to the default day ahead hourly pricing We summarize the existing demand response programs in New York and discuss OpenADR communication prioritization of demand response signals and control methods Building energy simulation models are developed and field tests are conducted to evaluate continuous energy management

213

Analysis of the potential for automating EIA-0129 main line natural gas sales to industrial users  

Science Conference Proceedings (OSTI)

This report presents the results of a review of the publication, Main Line Natural Gas Sales to Industrial Users, to examine alternative approaches to data handling. Preparation of the publication is divided into three phases: collection, processing, and production. Much of the information presented in the report is generated by manually searching the reporting schedule and performing arithmetic calculations to determine sales totals and price averages. Simple alphabetic searches and computational algorithms could be implemented to greatly simplify the production of this report. In particular, the most quantitative phase of developing the report, that of processing the data, has aspects which present possibilities for automation. Potential options include total automation, in which all calculations, checking and table construction are performed by the system; partial automation, in which calculations are processed by the system but preparation of tables is performed by hand; and retention of the current manual system.

Not Available

1982-05-10T23:59:59.000Z

214

Automated array assembly. Final report  

DOE Green Energy (OSTI)

Three main sections are included which describe a general technology assessment and manufacturing cost analysis; a near-term (1982) factory design; and the results of an experimental production study for the large-scale production of flat-panel silicon solar-cell arrays. The results of an extensive study and detailed analysis of technologies which could be related to array module manufacturing are presented. From this study, several manufacturing sequences emerge as candidates for satisfying the ERDA/JPL cost goal of $0.50/W selling price in 1986. A minimum manufacturing cost was found in a highly automated line of $0.30/W assuming the silicon is free. The panels are of a double-glass construction and are based on round wafers. Screen-printed silver has been used as the metallization with a spray-coated antireflection (AR) layer. The least expensive junction-formation technology appears to be ion implantation;however, several other technologies also may be used with very little cost penalty as described. An interim 1982 factory is described for the large-scale production of silicon solar-cell array modules. The boundary conditions for this design are the use of Czochralski silicon crystals and $25/kg polycrystalline silicon. The objective is a large-scale production facility to meet an intermediate ERDA cost goal of $2.00/W in 1982. A 6-month experimental production study of the elements of low-cost solar-cell manufacturing sequences is described as an outgrowth of the cost and manufacturing studies. This program consisted of three parts: an experimental production line study of the major variables associated with the fabrication of 3-in.-diameter silicon solar cells; a study of thick-film screen-printed silver metallization; and panel design and assembly development. (WHK)

D'Aiello, R.V.

1977-12-01T23:59:59.000Z

215

Automated array assembly. Annual report  

DOE Green Energy (OSTI)

The goal of the ERDA/JPL LSSA program of $0.50/W selling price for array modules in 1986 turns out to have been remarkably appropriate. An extensive and detailed analysis of technologies which could be related to array module manufacturing was completed and a minimum manufacturing cost in a highly automated line of $0.30/W was found assuming the silicon is free. The panels are of a double glass construction and are based on round wafers. Screen printed silver has been used as the metallization with a spray-coated AR layer. The least expensive junction formation technology appears to be ion implantation; however, several other technologies also may be used with very little cost penalty as described. Based on the required investment, a profit of $0.05/W appears reasonable. If silicon wafers are available at a price of $20 to 40/M/sup 2/, a selling price for these array modules of $0.50 to 0.66/W is projected. An analysis of the impact of factory size has been made. For a production level of 500 MW/yr, the price above is derived. For comparison, a factory processing 50 MW/yr using the same technology would sell modules for $0.54/W to $0.70/W. An analysis of the impact of wafer size indicates that with traditional metallization and panel designs there is no advantage in increasing wafer size from 3 in. to 5 in., and, in fact, there is some penalty (10% in $/W) due to increasedmetallization costs and reduced system performance. There is a premium placed on high efficiency due to its impact, not only on array module cost, but on system cost. For the near term goals of this program, wafers cut from single-crystal material seem the most likely sheet configuration.

Williams, B.F.

1977-05-01T23:59:59.000Z

216

Automated Collaborative Filtering Applications for Online Recruitment Services  

E-Print Network (OSTI)

. Online recruitment services suffer from shortcomings due to traditional search techniques. Most users fail to construct queries that provide an adequate and accurate description of their (job) requirements, leading to imprecise search results. We investigate one potential solution that combines implicit profiling methods and automated collaborative filtering (ACF) techniques to build personalised query-less job recommendations. Two ACF strategies are implemented and evaluated in the JobFinder domain. 1 Introduction Online recruitment services have emerged as one of the most successful and popular information services on the Internet, providing job seekers with a comprehensive database of jobs and a dedicated search engine. For example, the award-winning Irish site, JobFinder (www.jobfinder.ie). However, like many similar Internet applications JobFinder suffers from shortcomings, due to its reliance on traditional database technology and the client-pull information access mode...

Rachael Rafter; Keith Bradley; Barry Smyth

2000-01-01T23:59:59.000Z

217

ISA Approves Standard for Wireless Automation in Process Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ISA Approves Standard for Wireless Automation in Process Control ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications On September 9, the Standards and Practices Board of the International Society for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. ISA Approves Standard for Wireless Automation in Process Control Applications More Documents & Publications DOE/OE National SCADA Test Bed Fiscal Year 2009 Work Plan Wireless System Considerations When Implementing NERC Critical Infrastructure Protection Standards Control Systems Security Standards: Accomplishments And Impacts

218

Automated welding of nuclear piping systems  

SciTech Connect

Automated welding, or more broadly, automatic and mechanized welding processes, has found a role in nuclear power plant fabrication. This role has expanded from a rare or isolated application to relatively frequent usage in the last five years. More importantly, it is envisioned that use of automated welding will be increasing at an accelerated rate as broader exposure to this technology is achieved. Among the various pipe welding processes, the only one which has been developed for mechanized and automated nuclear piping welding is the gas tungsten arc welding (GTAW) process. This development has occurred in the past 10 to 15 years through the steady improvement and commmercialization of orbiting welding heads. Improvements in GTAW power supplies, control systems, etc., have aided this commercialization but the main element and pacing item has been the welding head itself. In order to review the status of mechanized and automated nuclear pipe welding, the topics of basic process equipment, joint design, fit-up requirements, welding parameters, and producibility will be addressed. In addition, anticipated future developments in automated systems will be discussed.

Hood, D.W.

1979-01-01T23:59:59.000Z

219

Comparison groups on bills: Automated, personalized energy information  

E-Print Network (OSTI)

evidence for dynamic social impact: the emergence ofconformity game: dynamic social impact in electronic groups,

Iyer, Maithili

2008-01-01T23:59:59.000Z

220

Quantitative Ice Accretion Information from the Automated Surface Observing System  

Science Conference Proceedings (OSTI)

Freezing precipitation is a persistent winter weather problem that costs the United States millions of dollars annually. Costs and infrastructure disruption may be greatly reduced by ice-storm warnings issued by the National Weather Service (NWS),...

Charles C. Ryerson; Allan C. Ramsay

2007-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Comparison groups on bills: Automated, personalized energy information  

NLE Websites -- All DOE Office Websites (Extended Search)

Buildings Cool Roofs and Heat Islands Demand Response Energy Efficiency Program and Market Trends High Technology and Industrial Systems Lighting Systems Residential Buildings...

222

Automated Sorting of Transuranic Waste  

SciTech Connect

The HANDSS-55 Transuranic Waste Sorting Module is designed to sort out items found in 55-gallon drums of waste as determined by an operator. Innovative imaging techniques coupled with fast linear motor-based motion systems and a flexible end-effector system allow the operator to remove items from the waste stream by a touch of the finger. When all desired items are removed from the waste stream, the remaining objects are automatically moved to a repackaging port for removal from the glovebox/cell. The Transuranic Waste Sorting Module consists of 1) a high accuracy XYZ Stereo Measurement and Imaging system, 2) a vibrating/tilting sorting table, 3) an XY Deployment System, 4) a ZR Deployment System, 5) several user-selectable end-effectors, 6) a waste bag opening system, 7) control and instrumentation, 8) a noncompliant waste load-out area, and 9) a Human/Machine Interface (HMI). The system is modular in design to accommodate database management tools, additional load-out ports, and other enhancements. Manually sorting the contents of a 55-gallon drum takes about one day per drum. The HANDSS-55 Waste Sorting Module is designed to significantly increase the throughput of this sorting process by automating those functions that are strenuous and tiresome for an operator to perform. The Waste Sorting Module uses the inherent ability of an operator to identify the items that need to be segregated from the waste stream and then, under computer control, picks that item out of the waste and deposits it in the appropriate location. The operator identifies the object by locating the visual image on a large color display and touches the image on the display with his finger. The computer then determines the location of the object, and performing a highspeed image analysis determines its size and orientation, so that a robotic gripper can be deployed to pick it up. Following operator verification by voice or function key, the object is deposited into a specified location.

Shurtliff, Rodney Marvin

2001-03-01T23:59:59.000Z

223

Bar-code automated waste tracking system  

Science Conference Proceedings (OSTI)

The Bar-Code Automated Waste Tracking System was designed to be a site-Specific program with a general purpose application for transportability to other facilities. The system is user-friendly, totally automated, and incorporates the use of a drive-up window that is close to the areas dealing in container preparation, delivery, pickup, and disposal. The system features ``stop-and-go`` operation rather than a long, tedious, error-prone manual entry. The system is designed for automation but allows operators to concentrate on proper handling of waste while maintaining manual entry of data as a backup. A large wall plaque filled with bar-code labels is used to input specific details about any movement of waste.

Hull, T.E.

1994-10-01T23:59:59.000Z

224

Automated imaging system for single molecules  

SciTech Connect

There is provided a high throughput automated single molecule image collection and processing system that requires minimal initial user input. The unique features embodied in the present disclosure allow automated collection and initial processing of optical images of single molecules and their assemblies. Correct focus may be automatically maintained while images are collected. Uneven illumination in fluorescence microscopy is accounted for, and an overall robust imaging operation is provided yielding individual images prepared for further processing in external systems. Embodiments described herein are useful in studies of any macromolecules such as DNA, RNA, peptides and proteins. The automated image collection and processing system and method of same may be implemented and deployed over a computer network, and may be ergonomically optimized to facilitate user interaction.

Schwartz, David Charles; Runnheim, Rodney; Forrest, Daniel

2012-09-18T23:59:59.000Z

225

Verified hybrid controllers for automated vehicles  

E-Print Network (OSTI)

Abstract The objective of an Automated Highway System (AHS) is to increase the safety and throughput of the existing highway infrastructure by introducing traffic automation. AHS is an example of a large scale, multiagent complex dynamical system and is ideally suited for a hierarchical hybrid controller. We discuss the design of safe and efficient hybrid controllers for regulation of vehicles on an AHS. We use game theoretic techniques to deal with the multiagent and multiobjective nature of the problem. The result is a hybrid controller that by design guarantees safety, without the need for further verification. The calculations also provide an upper bound on the performance that can be expected in terms of throughput at various levels of centralization. Index Terms Automated highway systems, game theory, safety. I.

John Lygeros; Datta N. Godbole; Shankar Sastry

1998-01-01T23:59:59.000Z

226

Beyond Commissioning: The Role of Automation  

Science Conference Proceedings (OSTI)

This article takes a brief look at the benefits of commissioning and describes a vision of the future where most of the objectives of commissioning will be accomplished automatically by capabilities built into the building systems themselves. Commissioning will become an activity that's performed continuously rather than periodically, and only repairs requiring replacement or overhaul of equipment will require manual intervention. The article then identifies some of the technologies that will be needed to realize this vision and ends with a call for all involved in the enterprise of building commissioning and automation to embrace and dedicate themselves to a future of automated commissioning.

Brambley, Michael R.; Katipamula, Srinivas

2005-02-01T23:59:59.000Z

227

Automated classification of congressional legislation  

Science Conference Proceedings (OSTI)

For social science researchers, content analysis and classification of United States Congressional legislative activities have been time consuming and costly. The Library of Congress THOMAS system provides detailed information about bills and laws, but ... Keywords: SVMs, U.S. congress, institutions, legislative activities, support vector machines, text analysis

Stephen Purpura; Dustin Hillard

2006-05-01T23:59:59.000Z

228

Home Automation in the Wild: Challenges and Opportunities  

E-Print Network (OSTI)

automation in two groups: 1) Do-it-yourselfers (DIY) who have installed automation themselves and 2 purposes [33]. To compare and contrast these two groups, we recruited both DIY and Outsourced households

Rajamani, Sriram K.

229

Automated Demand Response Strategies and Commissioning Commercial Building Controls  

E-Print Network (OSTI)

4 9 . Piette et at Automated Demand Response Strategies andDynamic Controls for Demand Response in New and ExistingFully Automated Demand Response Tests in Large Facilities"

Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila; Linkugel, Eric

2006-01-01T23:59:59.000Z

230

Automated Battery Swap and Recharge to Enable Persistent UAV Missions  

E-Print Network (OSTI)

This paper introduces a hardware platform for automated battery changing and charging for multiple UAV agents. The automated station holds a bu er of 8 batteries in a novel dual-drum structure that enables a "hot" battery ...

Toksoz, Tuna

231

Automated and human proofs in general mathematics: an initial comparison  

Science Conference Proceedings (OSTI)

First-order translations of large mathematical repositories allow discovery of new proofs by automated reasoning systems. Large amounts of available mathematical knowledge can be re-used by combined AI/ATP systems, possibly in unexpected ways. But automated ...

Jesse Alama; Daniel Khlwein; Josef Urban

2012-03-01T23:59:59.000Z

232

Automated Part Tracking and Metrology Applied to a Manufacturing Process  

E-Print Network (OSTI)

This paper presents a case study in the design of an automated part tracking and metrology systems for an industrial manufacturing system. A major productivity challenge of this facility is managing each batch of parts as it is formed, treated, and processed. Currently this is handled with paper forms that are transferred manually with each batch, resulting in scheduling problems, lost parts, and a general lack of ability to track orders through the production process. Problems in quality control also lead to significant waste. Required part measurements are taken and recorded manually, and are not considered reliable by plant management. The prototype design is an automated part tracking and quality control system to enhance productivity. The system uses RFID technology to identify parts and associate them with a particular order, giving management real-time information on the location of any product batch in the plant. In addition, part measurement quality control is enhanced with digitized calipers and scales, thus increases reliability of part measurement accuracy through human error reduction.

Morelli, F.; Halbert, T.; Hignight, M.; Kell, Z.; Lacy, J.; Rasmussen, B. P.

2013-01-01T23:59:59.000Z

233

Northwest Open Automated Demand Response Technology Demonstration Project  

SciTech Connect

The Lawrence Berkeley National Laboratory (LBNL) Demand Response Research Center (DRRC) demonstrated and evaluated open automated demand response (OpenADR) communication infrastructure to reduce winter morning and summer afternoon peak electricity demand in commercial buildings the Seattle area. LBNL performed this demonstration for the Bonneville Power Administration (BPA) in the Seattle City Light (SCL) service territory at five sites: Seattle Municipal Tower, Seattle University, McKinstry, and two Target stores. This report describes the process and results of the demonstration. OpenADR is an information exchange model that uses a client-server architecture to automate demand-response (DR) programs. These field tests evaluated the feasibility of deploying fully automated DR during both winter and summer peak periods. DR savings were evaluated for several building systems and control strategies. This project studied DR during hot summer afternoons and cold winter mornings, both periods when electricity demand is typically high. This is the DRRC project team's first experience using automation for year-round DR resources and evaluating the flexibility of commercial buildings end-use loads to participate in DR in dual-peaking climates. The lessons learned contribute to understanding end-use loads that are suitable for dispatch at different times of the year. The project was funded by BPA and SCL. BPA is a U.S. Department of Energy agency headquartered in Portland, Oregon and serving the Pacific Northwest. BPA operates an electricity transmission system and markets wholesale electrical power at cost from federal dams, one non-federal nuclear plant, and other non-federal hydroelectric and wind energy generation facilities. Created by the citizens of Seattle in 1902, SCL is the second-largest municipal utility in America. SCL purchases approximately 40% of its electricity and the majority of its transmission from BPA through a preference contract. SCL also provides ancillary services within its own balancing authority. The relationship between BPA and SCL creates a unique opportunity to create DR programs that address both BPA's and SCL's markets simultaneously. Although simultaneously addressing both market could significantly increase the value of DR programs for BPA, SCL, and the end user, establishing program parameters that maximize this value is challenging because of complex contractual arrangements and the absence of a central Independent System Operator or Regional Transmission Organization in the northwest.

Kiliccote, Sila; Piette, Mary Ann; Dudley, Junqiao

2010-03-17T23:59:59.000Z

234

Northwest Open Automated Demand Response Technology Demonstration Project  

E-Print Network (OSTI)

Report 2009. Open Automated Demand Response Communicationsand Techniques for Demand Response. California Energyand S. Kiliccote. Estimating Demand Response Load Impacts:

Kiliccote, Sila

2010-01-01T23:59:59.000Z

235

Performance of Integrated Systems of Automated Roller Shade Systems...  

NLE Websites -- All DOE Office Websites (Extended Search)

032011 Keywords automated roller shade systems, daylight responsive dimming systems, daylighting, Integrated systems, photoelectric controls Abstract Daylight responsive...

236

AN UPDATE ON THE DEVELOPMENT OF AN AUTOMATED ...  

Science Conference Proceedings (OSTI)

... An unconventional automated lipidomics approach (1) was designed by applying a liquid chromatography autosampler to draw up discrete ...

237

SYSTEMS AND METHODS FOR THE AUTONOMOUS CONTROL, AUTOMATED ...  

systems and methods for the autonomous control, automated guidance, and global coordination of moving process machinery united states patent application

238

Use of Automated External Defibrillators  

SciTech Connect

In an effort to improve survival from cardiac arrest, the American Heart Association (AHA) has promoted the Chain of Survival concept, describing a sequence of prehospital steps that result in improved survival after sudden cardiac arrest. These interventions include immediate deployment of emergency medical services, prompt cardiopulmonary resuscitation, early defibrillation when indicated, and early initiation of advanced medical care. Early defibrillation has emerged as the most important intervention with survival decreasing by 10% with each minute of delay in defibrillation. Ventricular Fibrillation (VF) is a condition in which there is uncoordinated contraction of the heart cardiac muscle of the ventricles in the heart, making them tremble rather than contract properly. VF is a medical emergency and if the arrhythmia continues for more than a few seconds, blood circulation will cease, and death can occur in a matter of minutes. During VF, contractions of the heart are not synchronized, blood flow ceases, organs begin to fail from oxygen deprivation and within 10 minutes, death will occur. When VF occurs, the victim must be defibrillated in order to establish the hearts normal rhythm. On average, the wait for an ambulance in populated areas of the United States is about 11 minutes. In view of these facts, the EFCOG Electrical Safety Task Group initiated this review to evaluate the potential value of deployment and use of automated external defibrillators (AEDs) for treatment of SCA victims. This evaluation indicates the long term survival benefit to victims of SCA is high if treated with CPR plus defibrillation within the first 3-5 minutes after collapse. According to the American Heart Association (AHA), survival rates as high as 74% are possible if treatment and defibrillation is performed in the first 3 minutes. In contrast survival rates are only 5% where no AED programs have been established to provide prompt CPR and defibrillation. ["CPR statistics" American Heart Association] Early intervention with both CPR and defibrillation can result in high long-term survival rates for SCA, as demonstrated by a study investigating the beneficial effects of AED devices at Chicagos OHare and Midway airports. The American Medical Association (AMA) advocates the widespread placement of AEDs [AMA Res. 413, A-02; Res. 424, A-04]; supports increasing government and industry funding for the purchase of AED devices; and encourages the American public to become trained in CPR and the use of AEDs. Some states, including Maryland, have enacted legislation requiring AED devices and a certified responder be available at high school and school-sponsored athletic events due the risk of SCA to athletes (the most common cause of death in young athletes). Ensuring AED availability at Department of Energy (DOE) sites would serve as a means of preventative intervention for over 14,000 DOE employees and 193,000 contract workers. It is estimated 1 per 1,000 adults 35 years of age and older will experience SCA in a given year.

Gregory K Christensen

2009-02-01T23:59:59.000Z

239

Automated Battery Swap and Recharge to Enable Persistent UAV Missions  

E-Print Network (OSTI)

Automated Battery Swap and Recharge to Enable Persistent UAV Missions Tuna Toksoz , Joshua Redding introduces a hardware platform for automated battery changing and charging for multiple UAV agents. The automated station holds a buffer of 8 batteries in a novel dual-drum structure that enables a "hot" battery

How, Jonathan P.

240

White Paper Series An Overview of Automated Enforcement  

E-Print Network (OSTI)

White Paper Series An Overview of Automated Enforcement Systems and Their Potential for Improving The following paper takes a widespread look at automated enforcement systems, specifically red-light cameras of drivers running red lights and speeding, the paper will define automated enforcement systems, the impact

North Carolina at Chapel Hill, University of

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Docking automation related technology, Phase 2 report  

SciTech Connect

This report generalizes the progress for Phase II of the Docking Automated Related Technologies task component within the Modular Artillery Ammunition Delivery System (MAADS) technology demonstrator of the Future Armored Resupply Vehicle (FARV) project. This report also covers development activity at Oak Ridge National Laboratory (ORNL) during the period from January to July 1994.

Jatko, W.B.; Goddard, J.S.; Gleason, S.S.; Ferrell, R.K.

1995-04-01T23:59:59.000Z

242

Automated modeling of modular robotic configurations  

Science Conference Proceedings (OSTI)

This research presents an automated method to build kinematic and dynamic models for assembling modular components of modular robotic systems. By comparison with other approaches, the proposed method is applicable to any robotic configuration with serial, ... Keywords: Automatic modeling, Computer-aided design, Configuration design, Finite element method, Modular architecture, Modular robotic system, Reconfigurable robot

Z. M. Bi; W. A. Gruver; W. J. Zhang; S. Y. T. Lang

2006-12-01T23:59:59.000Z

243

Apparatus for automated testing of biological specimens  

DOE Patents (OSTI)

An apparatus for performing automated testing of infections biological specimens is disclosed. The apparatus comprise a process controller for translating user commands into test instrument suite commands, and a test instrument suite comprising a means to treat the specimen to manifest an observable result, and a detector for measuring the observable result to generate specimen test results.

Layne, Scott P. (Los Angeles, CA); Beugelsdijk, Tony J. (Los Alamos, NM)

1999-01-01T23:59:59.000Z

244

Focus Windows: A Tool for Automated Provers ?  

E-Print Network (OSTI)

Focus Windows: A Tool for Automated Provers ? Florina Piroi Research Institute For Symbolic or understand the validity of a particular step. Focus windows were #12;rst introduced as a technique for proof the implementation and the use of the focus windows technique in the frame of the Theorema system [3]. One

245

Safe controllers design for industrial automation systems  

Science Conference Proceedings (OSTI)

The design of safe industrial controllers is one of the most important domains related to Automation Systems research. To support it, synthesis and analysis techniques are available. Among the analysis techniques, two of the most important are Simulation ... Keywords: Formal verification, Industrial systems behaviour modelling, Real-time systems, Safe controllers, Simulation

Jos Machado; Eurico Seabra; Jos C. Campos; Filomena Soares; Celina P. Leo

2011-05-01T23:59:59.000Z

246

Automated reasoning service for HOL light  

Science Conference Proceedings (OSTI)

HOL(y)Hammer is an AI/ATP service for formal (computer-understandable) mathematics encoded in the HOL Light system, in particular for the users of the large Flyspeck library. The service uses several automated reasoning systems combined with several ...

Cezary Kaliszyk, Josef Urban

2013-07-01T23:59:59.000Z

247

Honeywell Modular Automation System Computer Software Documentation  

Science Conference Proceedings (OSTI)

This document provides a Computer Software Documentation for a new Honeywell Modular Automation System (MAS) being installed in the Plutonium Finishing Plant (PFP). This system will be used to control new thermal stabilization furnaces in HA-211 and vertical denitration calciner in HC-230C-2.

CUNNINGHAM, L.T.

1999-09-27T23:59:59.000Z

248

Toward automation in hearing aid design  

Science Conference Proceedings (OSTI)

In the manufacturing of customized medical prostheses, such as in-the-ear hearing aids, the design process often is dictated by a source template representing the anatomy of a patient and a set of work instructions representing the description of surface ... Keywords: Application, Automation, CAD, CAM, Expert systems, Feature recognition, Hearing aid design, Medical prostheses manufacturing, Modeling, Rule-based systems, Shape transformation

Konrad Sickel; Sajjad Baloch; Rupen Melkisetoglu; Vojtech Bubnik; Sergei Azernikov; Tong Fang

2011-12-01T23:59:59.000Z

249

Salsbury and Diamond: Automated Testing of HVAC Systems for Commissioning -1 -Automated Testing of HVAC Systems for Commissioning  

E-Print Network (OSTI)

and Diamond: Automated Testing of HVAC Systems for Commissioning - 1 - Automated Testing of HVAC Systems This paper describes an approach to the automation of the commissioning of HVAC systems. The approach of many HVAC systems is limited more by poor installation, commissioning, and maintenance than by poor

250

Automation of Capacity Bidding with an Aggregator Using Open Automated Demand Response  

Science Conference Proceedings (OSTI)

This report summarizes San Diego Gas& Electric Company?s collaboration with the Demand Response Research Center to develop and test automation capability for the Capacity Bidding Program in 2007. The report describes the Open Automated Demand Response architecture, summarizes the history of technology development and pilot studies. It also outlines the Capacity Bidding Program and technology being used by an aggregator that participated in this demand response program. Due to delays, the program was not fully operational for summer 2007. However, a test event on October 3, 2007, showed that the project successfully achieved the objective to develop and demonstrate how an open, Web?based interoperable automated notification system for capacity bidding can be used by aggregators for demand response. The system was effective in initiating a fully automated demand response shed at the aggregated sites. This project also demonstrated how aggregators can integrate their demand response automation systems with San Diego Gas& Electric Company?s Demand Response Automation Server and capacity bidding program.

Kiliccote, Sila; Piette, Mary Ann

2008-10-01T23:59:59.000Z

251

Sabbath Day Home Automation: "It's Like Mixing Technology and Religion"  

E-Print Network (OSTI)

We present a qualitative study of 20 American Orthodox Jewish families' use of home automation for religious purposes. These lead users offer insight into real-life, long-term experience with home automation technologies. We discuss how automation was seen by participants to contribute to spiritual experience and how participants oriented to the use of automation as a religious custom. We also discuss the relationship of home automation to family life. We draw design implications for the broader population, including surrender of control as a design resource, home technologies that support long-term goals and lifestyle choices, and respite from technology.

Woodruff, Allison; Foucault, Brooke

2007-01-01T23:59:59.000Z

252

Assessment of Emerging Wired and Fiber Technologies for Advanced T&D Automation  

Science Conference Proceedings (OSTI)

This report summarizes the strengths and weaknesses of some of the leading candidate wireless technologies for short-distance utility automation and customer systems integration. The report also identifies some of the remaining questions and issues with the use of these technologies as applied to proposed utility applications. This information can augment utility decision-making surrounding the development or adoption of these technologies for a given application.

2008-10-27T23:59:59.000Z

253

IFC BIM-Based Methodology for Semi-Automated Building Energy Performance Simulation  

SciTech Connect

Building energy performance (BEP) simulation is still rarely used in building design, commissioning and operations. The process is too costly and too labor intensive, and it takes too long to deliver results. Its quantitative results are not reproducible due to arbitrary decisions and assumptions made in simulation model definition, and can be trusted only under special circumstances. A methodology to semi-automate BEP simulation preparation and execution makes this process much more effective. It incorporates principles of information science and aims to eliminate inappropriate human intervention that results in subjective and arbitrary decisions. This is achieved by automating every part of the BEP modeling and simulation process that can be automated, by relying on data from original sources, and by making any necessary data transformation rule-based and automated. This paper describes the new methodology and its relationship to IFC-based BIM and software interoperability. It identifies five steps that are critical to its implementation, and shows what part of the methodology can be applied today. The paper concludes with a discussion of application to simulation with EnergyPlus, and describes data transformation rules embedded in the new Geometry Simplification Tool (GST).

Bazjanac, Vladimir

2008-07-01T23:59:59.000Z

254

DAVIC - Distributed Energy Automation via Implicit Communication  

NLE Websites -- All DOE Office Websites (Extended Search)

DAVIC - Distributed Energy Automation via Implicit Communication DAVIC - Distributed Energy Automation via Implicit Communication Speaker(s): Peter Palensky Date: January 22, 2008 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Peng Xu The electricity grid is seen as a wide-area distributed process, determined by its sub-processes - in our case the loads and distributed generation. Network-based coordination needs to be done very carefully and properly timed to avoid instabilities. Luckily, every point of the grid has the same grid frequency and the same time. Integrating these two trivial things (implicit communication) into one consistent communication model might complement a low-quality (explicit) best-effort communication channel (e.g. Internet, GPRS) for real time applications. A simulation shall clarify how

255

home automation | OpenEI Community  

Open Energy Info (EERE)

91 91 Varnish cache server Home Groups Community Central Green Button Applications Developer Utility Rate FRED: FRee Energy Database More Public Groups Private Groups Features Groups Blog posts Content Stream Documents Discussions Polls Q & A Events Notices My stuff Energy blogs 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142285591 Varnish cache server home automation Home Graham7781's picture Submitted by Graham7781(2002) Super contributor 23 January, 2013 - 13:57 The Consumer Electronics Show round-up CES electronics home automation Las Vegas OpenEI Smart Grid Every January, Las Vegas hosts the Consumer Electronics Show. The CES is the world's largest technology-related trade show. The highlights of this year's show were OLED TVs, ultra-thin laptops,

256

Automated Hydroforming of Seamless Superconducting RF Cavity  

SciTech Connect

We are studying the possibility of automated hydroforming process for seamless superconducting RF cavities. Preliminary hydroforming tests of three-cell cavities from seamless tubes made of C1020 copper have been performed. The key point of an automated forming is to monitor and strictly control some parameters such as operation time, internal pressure and material displacements. Especially, it is necessary for our studies to be able to control axial and radial deformation independently. We plan to perform the forming in two stages to increase the reliability of successful forming. In the first stage hydroforming by using intermediate constraint dies, three-cell cavities were successfully formed in less than 1 minute. In parallel, we did elongation tests on cavity-quality niobium and confirmed that it is possible to achieve an elongation of >64% in 2 stages that is required for our forming of 1.3 GHz cavities.

Nagata, Tomohiko [ULVAC, Inc.; Shinozawa, Seiichi [ULVAC, Inc.; Abe, Noriyuki [ULVAC, Inc.; Nagakubo, Junki [ULVAC, Inc.; Murakami, Hirohiko [ULVAC, Inc.; Tajima, Tsuyoshi [Los Alamos National Laboratory; Inoue, Hitoshi [High Energy Accelerator Research Organization, KEK; Yamanaka, Masashi [High Energy Accelerator Research Organization, KEK; Ueno, Kenji [High Energy Accelerator Research Organization, KEK

2012-07-31T23:59:59.000Z

257

A Modular Architecture for Building Automation Systems  

E-Print Network (OSTI)

The deployment of building automation systems (BAS) allows to increase comfort, safety and security and to reduce operational cost. Today such systems typically follow a two-layered hierarchical approach. While control networks interconnect distributed sensors, actuators and controllers, a backbone provides the necessary infrastructure for management tasks hosted by configuration and management devices. In addition, devices interconnecting the control network with the backbone and the backbone with further networks (e.g., the Internet) play a strategic role. All BAS devices contributing to a particular functionality differ in their requirements for hardware. This paper discusses requirements for devices used in the building automation domain and presents our work in progress to assemble platforms with different purposes relying on a modular architecture. 1

Wolfgang Granzer; Wolfgang Kastner; Georg Neugschw; Fritz Praus

2006-01-01T23:59:59.000Z

258

Automation impact study of Army Training Management  

SciTech Connect

The main objectives of this impact study were to identify the potential cost savings associated with automated Army Training Management (TM), and to perform a cost-benefit analysis for an Army-wide automated TM system. A subsidiary goal was to establish baseline data for an independent evaluation of a prototype Integrated Training Management System (ITMS), to be tested in the fall of 1988. A structured analysis of TM doctrine was performed for comparison with empirical data gathered in a job analysis survey of selected units of the 9ID (MTZ) at Ft. Lewis, Washington. These observations will be extended to other units in subsequent surveys. The survey data concerning staffing levels and amount of labor expended on eight distinct TM tasks were analyzed in a cost effectiveness model. The main results of the surveys and cost effectiveness modelling are summarized. 18 figs., 47 tabs.

Sanquist, T.F.; Schuller, C.R.; McCallum, M.C.; Underwood, J.A.; Bettin, P.J.; King, J.L.; Melber, B.D.; Hostick, C.J.; Seaver, D.A.

1988-01-01T23:59:59.000Z

259

Flow through electrode with automated calibration  

DOE Patents (OSTI)

The present invention is an improved automated flow through electrode liquid monitoring system. The automated system has a sample inlet to a sample pump, a sample outlet from the sample pump to at least one flow through electrode with a waste port. At least one computer controls the sample pump and records data from the at least one flow through electrode for a liquid sample. The improvement relies upon (a) at least one source of a calibration sample connected to (b) an injection valve connected to said sample outlet and connected to said source, said injection valve further connected to said at least one flow through electrode, wherein said injection valve is controlled by said computer to select between said liquid sample or said calibration sample. Advantages include improved accuracy because of more frequent calibrations, no additional labor for calibration, no need to remove the flow through electrode(s), and minimal interruption of sampling.

Szecsody, James E [Richland, WA; Williams, Mark D [Richland, WA; Vermeul, Vince R [Richland, WA

2002-08-20T23:59:59.000Z

260

The Warning Decision Support SystemIntegrated Information  

Science Conference Proceedings (OSTI)

The Warning Decision Support SystemIntegrated Information (WDSS-II) is the second generation of a system of tools for the analysis, diagnosis, and visualization of remotely sensed weather data. WDSS-II provides a number of automated algorithms ...

Valliappa Lakshmanan; Travis Smith; Gregory Stumpf; Kurt Hondl

2007-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Algorithms to Automate LCLS Undulator Tuning  

Science Conference Proceedings (OSTI)

Automation of the LCLS undulator tuning offers many advantages to the project. Automation can make a substantial reduction in the amount of time the tuning takes. Undulator tuning is fairly complex and automation can make the final tuning less dependent on the skill of the operator. Also, algorithms are fixed and can be scrutinized and reviewed, as opposed to an individual doing the tuning by hand. This note presents algorithms implemented in a computer program written for LCLS undulator tuning. The LCLS undulators must meet the following specifications. The maximum trajectory walkoff must be less than 5 {micro}m over 10 m. The first field integral must be below 40 x 10{sup -6} Tm. The second field integral must be below 50 x 10{sup -6} Tm{sup 2}. The phase error between the electron motion and the radiation field must be less than 10 degrees in an undulator. The K parameter must have the value of 3.5000 {+-} 0.0005. The phase matching from the break regions into the undulator must be accurate to better than 10 degrees. A phase change of 113 x 2{pi} must take place over a distance of 3.656 m centered on the undulator. Achieving these requirements is the goal of the tuning process. Most of the tuning is done with Hall probe measurements. The field integrals are checked using long coil measurements. An analysis program written in Matlab takes the Hall probe measurements and computes the trajectories, phase errors, K value, etc. The analysis program and its calculation techniques were described in a previous note. In this note, a second Matlab program containing tuning algorithms is described. The algorithms to determine the required number and placement of the shims are discussed in detail. This note describes the operation of a computer program which was written to automate LCLS undulator tuning. The algorithms used to compute the shim sizes and locations are discussed.

Wolf, Zachary

2010-12-03T23:59:59.000Z

262

Automated Methods for Multiplexed Pathogen Detection  

Science Conference Proceedings (OSTI)

Detection of pathogenic microorganisms in environmental samples is a difficult process. Concentration of the organisms of interest also co-concentrates inhibitors of many end-point detection methods, notably, nucleic acid methods. In addition, sensitive, highly multiplexed pathogen detection continues to be problematic. The primary function of the BEADS (Biodetection Enabling Analyte Delivery System) platform is the automated concentration and purification of target analytes from interfering substances, often present in these samples, via a renewable surface column. In one version of BEADS, automated immunomagnetic separation (IMS) is used to separate cells from their samples. Captured cells are transferred to a flow-through thermal cycler where PCR, using labeled primers, is performed. PCR products are then detected by hybridization to a DNA suspension array. In another version of BEADS, cell lysis is performed, and community RNA is purified and directly labeled. Multiplexed detection is accomplished by direct hybridization of the RNA to a planar microarray. The integrated IMS/PCR version of BEADS can successfully purify and amplify 10 E. coli O157:H7 cells from river water samples. Multiplexed PCR assays for the simultaneous detection of E. coli O157:H7, Salmonella, and Shigella on bead suspension arrays was demonstrated for the detection of as few as 100 cells for each organism. Results for the RNA version of BEADS are also showing promising results. Automation yields highly purified RNA, suitable for multiplexed detection on microarrays, with microarray detection specificity equivalent to PCR. Both versions of the BEADS platform show great promise for automated pathogen detection from environmental samples. Highly multiplexed pathogen detection using PCR continues to be problematic, but may be required for trace detection in large volume samples. The RNA approach solves the issues of highly multiplexed PCR and provides ''live vs. dead'' capabilities. However, sensitivity of the method will need to be improved for RNA analysis to replace PCR.

Straub, Tim M.; Dockendorff, Brian P.; Quinonez-Diaz, Maria D.; Valdez, Catherine O.; Shutthanandan, Janani I.; Tarasevich, Barbara J.; Grate, Jay W.; Bruckner-Lea, Cindy J.

2005-09-01T23:59:59.000Z

263

Home Network Technologies and Automating Demand Response  

Science Conference Proceedings (OSTI)

Over the past several years, interest in large-scale control of peak energy demand and total consumption has increased. While motivated by a number of factors, this interest has primarily been spurred on the demand side by the increasing cost of energy and, on the supply side by the limited ability of utilities to build sufficient electricity generation capacity to meet unrestrained future demand. To address peak electricity use Demand Response (DR) systems are being proposed to motivate reductions in electricity use through the use of price incentives. DR systems are also be design to shift or curtail energy demand at critical times when the generation, transmission, and distribution systems (i.e. the 'grid') are threatened with instabilities. To be effectively deployed on a large-scale, these proposed DR systems need to be automated. Automation will require robust and efficient data communications infrastructures across geographically dispersed markets. The present availability of widespread Internet connectivity and inexpensive, reliable computing hardware combined with the growing confidence in the capabilities of distributed, application-level communications protocols suggests that now is the time for designing and deploying practical systems. Centralized computer systems that are capable of providing continuous signals to automate customers reduction of power demand, are known as Demand Response Automation Servers (DRAS). The deployment of prototype DRAS systems has already begun - with most initial deployments targeting large commercial and industrial (C & I) customers. An examination of the current overall energy consumption by economic sector shows that the C & I market is responsible for roughly half of all energy consumption in the US. On a per customer basis, large C & I customers clearly have the most to offer - and to gain - by participating in DR programs to reduce peak demand. And, by concentrating on a small number of relatively sophisticated energy consumers, it has been possible to improve the DR 'state of the art' with a manageable commitment of technical resources on both the utility and consumer side. Although numerous C & I DR applications of a DRAS infrastructure are still in either prototype or early production phases, these early attempts at automating DR have been notably successful for both utilities and C & I customers. Several factors have strongly contributed to this success and will be discussed below. These successes have motivated utilities and regulators to look closely at how DR programs can be expanded to encompass the remaining (roughly) half of the state's energy load - the light commercial and, in numerical terms, the more important residential customer market. This survey examines technical issues facing the implementation of automated DR in the residential environment. In particular, we will look at the potential role of home automation networks in implementing wide-scale DR systems that communicate directly to individual residences.

McParland, Charles

2009-12-01T23:59:59.000Z

264

V-132: IBM Tivoli System Automation Application Manager Multiple  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: IBM Tivoli System Automation Application Manager Multiple 2: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities V-132: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities April 12, 2013 - 6:00am Addthis PROBLEM: IBM has acknowledged multiple vulnerabilities in IBM Tivoli System Automation Application Manager PLATFORM: The vulnerabilities are reported in IBM Tivoli System Automation Application Manager versions 3.1, 3.2, 3.2.1, and 3.2.2 ABSTRACT: Multiple security vulnerabilities exist in the IBM Java Runtime Environment component of IBM Tivoli System Automation Application Manager which may affect the product REFERENCE LINKS: Secunia Advisory: SA53006 IBM Security Bulletin 21633991 IBM Security Bulletin 21633992 CVE-2011-3563 CVE-2012-0497 CVE-2012-0498 CVE-2012-0499 CVE-2012-0501

265

V-132: IBM Tivoli System Automation Application Manager Multiple  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: IBM Tivoli System Automation Application Manager Multiple 2: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities V-132: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities April 12, 2013 - 6:00am Addthis PROBLEM: IBM has acknowledged multiple vulnerabilities in IBM Tivoli System Automation Application Manager PLATFORM: The vulnerabilities are reported in IBM Tivoli System Automation Application Manager versions 3.1, 3.2, 3.2.1, and 3.2.2 ABSTRACT: Multiple security vulnerabilities exist in the IBM Java Runtime Environment component of IBM Tivoli System Automation Application Manager which may affect the product REFERENCE LINKS: Secunia Advisory: SA53006 IBM Security Bulletin 21633991 IBM Security Bulletin 21633992 CVE-2011-3563 CVE-2012-0497 CVE-2012-0498 CVE-2012-0499 CVE-2012-0501

266

Phase 2 of the array automated assembly task for the low cost silicon solar array project. Interim report  

DOE Green Energy (OSTI)

The LSA Automated Array Assembly Task has as its goal the manufacture of photovoltaic modules at a capacity of 500 MW per year at a cost of $0.50 per peak watt. Divided between ten solar cell manufacturers, each installation should produce 50 MW per year. This implies that automated machinery would continuously produce 120 solar cells per minute. The purpose of this report is to detail the processes and techniques which are believed to have great promise of accomplishing this task. The initial stages of the program were involved in studying the possibility of automated assembly. Phase 1 reviewed a large cross section of processes, conceptual designs, and innovative technologies in preparation for 1986. Through this documentation, a large amount of comprehensive data has been collected. It is these reports upon which the next phase of the program is based. The purpose of Phase 2 is to propose an automated sequence, verify it and present future cost projections. Utilizing the large amount of information available from Phase 1 and drawing from its own experience Solarex has proposed a process sequence which it is believed has great potential of achieving the LSA goals. This report describes the processes, details, the verification tests performed, and estimates the cost of such an automated array assembly.

Wihl, M.; Toro, J.; Scheinine, A.; Anderson, J.

1978-11-01T23:59:59.000Z

267

EL Program: Next-Generation Robotics and Automation  

Science Conference Proceedings (OSTI)

... and automation technologies for smart manufacturing and cyber-physical systems ... robotics technology holds the potential to transform the future of ...

2013-01-02T23:59:59.000Z

268

Industrial SPP/Partner Teaming Profile - Rockwell Automation  

NLE Websites -- All DOE Office Websites (Extended Search)

the system at 14 General Mills facilities. Project Summary The project was to design an EMS for dramatically different AHUs. Rockwell Automation worked with General Mills...

269

Direct versus Facility Centric Load Control for Automated Demand Response  

E-Print Network (OSTI)

Interoperable Automated Demand Response Infrastructure.and Techniques for Demand Response. LBNL Report 59975. Mayand Communications for Demand Response and Energy Efficiency

Piette, Mary Ann

2010-01-01T23:59:59.000Z

270

Linking Continuous Energy Management and Open Automated Demand Response  

E-Print Network (OSTI)

A. Barat, D. Watson. Demand Response Spinning ReserveOpen Automated Demand Response Communication Standards:Dynamic Controls for Demand Response in a New Commercial

Piette, Mary Ann

2009-01-01T23:59:59.000Z

271

Northwest Open Automated Demand Response Technology Demonstration Project  

E-Print Network (OSTI)

reliability signals for demand response GTA HTTPS HVAC IT kWand Commissioning Automated Demand Response Systems. and Techniques for Demand Response. California Energy

Kiliccote, Sila

2010-01-01T23:59:59.000Z

272

Measurement and evaluation techniques for automated demand response demonstration  

E-Print Network (OSTI)

Development for Demand Response Calculation Findings andManagement and Demand Response in Commercial Buildings. of Fully Automated Demand Response in Large Facilities.

Motegi, Naoya; Piette, Mary Ann; Watson, David S.; Sezgen, Osman; ten Hope, Laurie

2004-01-01T23:59:59.000Z

273

Results and commissioning issues from an automated demand response pilot  

E-Print Network (OSTI)

Conference on Building Commissioning. May 2002. Motegi,et al: Results and Commissioning Issues from an AutomatedConference on Building Commissioning: May 1e-20, 2004

Piette, Mary Ann; Watson, Dave; Sezgen, Osman; Motegi, Naoya

2004-01-01T23:59:59.000Z

274

Safety Aware Platooning of Automated Electric Transport Vehicles.  

E-Print Network (OSTI)

??Safety is a paramount concern when considering implementation of an automated highway where computers control the vehicles. Even with computer-fast reaction time there is inevitably (more)

Jackson, Spencer Scott

2013-01-01T23:59:59.000Z

275

Automated Diagnostics and Soft-Repair for Smart Homes  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated fault detection and diagnosis (AFDD) (<<1%) *&1; Around-the-clock protection and optimization *&1; Energy savings and longer equipment life *&1; Condition-based maintenance...

276

Automated Soil Gas Monitoring Chamber - Oak Ridge National ...  

Automated Soil Gas Monitoring Chamber ... A chamber for trapping soil gases as they evolve from the soil without disturbance to the soil and to the natural

277

HEADLINE: DOE Pursues Automation in West Virginia Lab  

NLE Websites -- All DOE Office Websites (Extended Search)

assigned to their definition of a Smart Grid. So, what exactly does this Smart Grid distribution automation system look like? As always, interoperability is a factor. First, it's...

278

Automation uses common data base. [Power Resource Optimization by Electronics (PROBE)  

SciTech Connect

Supervisory-control and data-acquisition (SCADA) systems are not new to electric utilities, but the extension of this technology into substation and distribution-feeder automation has been slow. General Electric Co. and Commonwealth Edison Co. have installed a substation/distribution-automation research system at the latter's LaGrange Park substation to demonstrate feasibility and gain field experience. Niagara Mohawk Power Corp has recently joined in evaluating the functional specifications, in planning and in evaluating field tests, and is sharing in the funding. The project has been named PROBE (power resource optimization by electronics), and its key concept is use of a common data base for substation and distribution information. The project will include three phases of which the initial trial evaluation at LaGrange Park is identified as PROBE-1.

1976-09-01T23:59:59.000Z

279

PUCK: an automated prompting system for smart environments: toward achieving automated prompting--challenges involved  

Science Conference Proceedings (OSTI)

The growth in popularity of smart environments has been quite steep in the last decade and so has the demand for smart health assistance systems. A smart home-based prompting system can enhance these technologies to deliver in-home interventions to users ... Keywords: Automated prompting, Imbalanced class distribution, Machine learning, Prompting systems, Smart environments

Barnan Das; Diane J. Cook; Maureen Schmitter-Edgecombe; Adriana M. Seelye

2012-10-01T23:59:59.000Z

280

AUTOMATED PROCESS MONITORING: APPLYING PROVEN AUTOMATION TECHNIQUES TO INTERNATIONAL SAFEGUARDS NEEDS  

SciTech Connect

Identification and quantification of specific alpha- and beta-emitting radionuclides in complex liquid matrices is highly challenging, and is typically accomplished through laborious wet chemical sample preparation and separations followed by analysis using a variety of detection methodologies (e.g., liquid scintillation, gas proportional counting, alpha energy analysis, mass spectrometry). Analytical results may take days or weeks to report. Chains of custody and sample security measures may also complicate or slow the analytical process. When an industrial process-scale plant requires the monitoring of specific radionuclides as an indication of the composition of its feed stream or of plant performance, radiochemical measurements must be fast, accurate, and reliable. Scientists at Pacific Northwest National Laboratory have assembled a fully automated prototype Process Monitor instrument capable of a variety of tasks: automated sampling directly from a feed stream, sample digestion / analyte redox adjustment, chemical separations, radiochemical detection and data analysis / reporting. The system is compact, its components are fluidically inter-linked, and analytical results could be immediately transmitted to on- or off-site locations. The development of a rapid radiochemical Process Monitor for 99Tc in Hanford tank waste processing streams, capable of performing several measurements per hour, will be discussed in detail. More recently, the automated platform was modified to perform measurements of 90Sr in Hanford tank waste stimulant. The system exemplifies how automation could be integrated into reprocessing facilities to support international nuclear safeguards needs.

O'Hara, Matthew J.; Durst, Philip C.; Grate, Jay W.; Devol, Timothy A.; Egorov, Oleg; Clements, John P.

2008-07-13T23:59:59.000Z

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Evaluatoni of Automated Utility Bill Calibration Methods  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. Evaluation of Automated Utility Bill Calibration Methods BA Technical Update Meeting Ben Polly, Joe Robertson 04/30/13 Utility Bill Calibration * "Calibrate" or "true-up" building energy models to utility bill data to increase the accuracy of retrofit savings predictions * Calibration methods typically involve adjusting input parameters * Predict retrofit savings using the adjusted (calibrated) model 2 Background: BESTEST-EX * BESTEST-EX is a suite for testing calibration methods and retrofit savings predictions associated with audit software * Field trials showed that:

282

Automated flow-temperature-humidity control system  

SciTech Connect

An automated system that controls air flow, temperature, and humidity was developed from a commercially available temperature-humidity indicator and a specially built flow-temperature-humidity control module. Parameters are set using direct-reading dials on the control module. The air flow is maintained using a mass-flow controller while process controllers connected to the indicator regulate humidity and temperature. The system will run indefinitely without need for operator intervention. If the module and indicator are calibrated properly, accurate air flows (+-2% of full scale), temperatures (+-0.3/sup 0/C), and humidities (+-2% RH) can be achieved.

Nelson, G.O.; Taylor, R.D.

1980-10-01T23:59:59.000Z

283

Automated Knowledge Annotation for Dynamic Collaborative Environments  

Science Conference Proceedings (OSTI)

This paper describes the Knowledge Encapsulation Framework (KEF), a suite of tools to enable automated knowledge annotation for modeling and simulation projects. This framework can be used to capture evidence (e.g., facts extracted from journal articles and government reports), discover new evidence (from similar peer-reviewed material as well as social media), enable discussions surrounding domain-specific topics and provide automatically generated semantic annotations for improved corpus investigation. The current KEF implementation is presented within a wiki environment, providing a simple but powerful collaborative space for team members to review, annotate, discuss and align evidence with their modeling frameworks.

Cowell, Andrew J.; Gregory, Michelle L.; Marshall, Eric J.; McGrath, Liam R.

2009-05-19T23:59:59.000Z

284

Honeywell Modular Automation System Computer Software Documentation  

SciTech Connect

The purpose of this Computer Software Document (CSWD) is to provide configuration control of the Honeywell Modular Automation System (MAS) in use at the Plutonium Finishing Plant (PFP). This CSWD describes hardware and PFP developed software for control of stabilization furnaces. The Honeywell software can generate configuration reports for the developed control software. These reports are described in the following section and are attached as addendum's. This plan applies to PFP Engineering Manager, Thermal Stabilization Cognizant Engineers, and the Shift Technical Advisors responsible for the Honeywell MAS software/hardware and administration of the Honeywell System.

STUBBS, A.M.

2000-12-04T23:59:59.000Z

285

Cellnet | Open Energy Information  

Open Energy Info (EERE)

automated metre reading and distribution automation solutions to the utility industry, acquired by Bayard Group in November 2006 and merged into the Group's single...

286

Formal Verification of Safety Automation Logic Designs  

E-Print Network (OSTI)

In safety critical processes, especially in nuclear power plants, the new digitalized automation (I&C) systems have brought out new needs for safety evaluation. The programmable digital logic controllers can perform complicated control tasks and, thus, their comprehensive verification against safety requirements is a difficult task. Model checking is a promising approach that enables complete verification of a logic design when a finite state machine model of the control logic is available. The paper describes the use of model checking for the verification of an arc protection system and summarizes experiences of utilizing model checking in automation design and verification. For the verification of the arc protection system, it was necessary to model the overall design of the system and its operation environment. The environment model could be kept relatively simple while covering the essential behaviour of the environment. The results show that it is possible to reliably verify the presence of a desired or the absence of an undesired behaviour of the system. The possibility of complete verification makes model checking different from simulation based testing where only selected schemes can be simulated and one can never be sure that all the possible sequences are examined.

Janne Valkonen; Matti Koskimies; Kim Bjrkman; Keijo Heljanko; Ilkka Niemel; Jari J. Hmlinen

2009-01-01T23:59:59.000Z

287

UV LED lighting for automated crystal centring  

E-Print Network (OSTI)

A direct outcome of the exponential growth of macromolecular crystallography is the continuously increasing demand for synchrotron beam time, both from academic and industrial users. As more and more projects entail screening a profusion of sample crystals, fully automated procedures at every level of the experiments are being implemented at all synchrotron facilities. One of the major obstacles to achieving such automation lies in the sample recognition and centring in the X-ray beam. The capacity of UV light to specifically react with aromatic residues present in proteins or with DNA base pairs is at the basis of UV-assisted crystal centring. Although very efficient, a well known side effect of illuminating biological samples with strong UV sources is the damage induced on the irradiated samples. In the present study the effectiveness of a softer UV light for crystal centring by taking advantage of low-power light-emitting diode (LED) sources has been investigated. The use of UV LEDs represents a lowcost solution for crystal centring with high specificity.

Leonard M. G. Chavas; Yusuke Yamada; Masahiko Hiraki; Noriyuki Igarashi; Naohiro Matsugaki; Soichi Wakatsuki

2010-01-01T23:59:59.000Z

288

Automation of the LANL ARIES lathe glovebox  

SciTech Connect

This paper presents the design of an automation system required for material handling within a glovebox. The Advanced Recovery and Integration Extraction System (ARIES) located at the Los Alamos National Laboratory (LANL) enables workers to dismantle nuclear weapons, separating the plutonium from other weapon components. The ARIES line consists of several gloveboxes that allow the 'pit' or trigger of a nuclear weapon to be dismantled and the plutonium stored in a safe form. The Lathe glovebox is the first step in the ARIES line and is used to cut the pit open to be dismantled. There are several methods for doing this, however there are advantages to using the lathe over other methods for this process. In general, this system will give the ARIES line the capability to handle a wider range of pit types. The system consists of a lathe, a 4 Degree of Freedom (DOF) robot, a glovebox that houses them, and a universal controller that resides outside the glovebox and controls all equipment. This paper will present the design and possible implementation of this lathe automation system. It will cover the system requirements, the mechanical hardware used within the glovebox, the control system and software, and operation procedures for various tasks.

Pittman, P. C. (Pete C.); Staab, T. A. (Torsten); Nelson, D. C. (David C.); Santistevan, W. W. (William W.); Brown, W. G. (Wendel G.)

2001-01-01T23:59:59.000Z

289

Application Guide for the Automation of Distribution Feeder Capacitors  

Science Conference Proceedings (OSTI)

This fourth and final report in EPRI's capacitor reliability study deals with automating distribution capacitors. Prior reports dealt with nuisance fuse operations, operating and construction practices, and lighting protection and grounding of capacitor controllers. This guide is concerned with applying automated switched capacitors to distribution systems. Consideration is given to applications involving locally controlled capacitor banks and to systems utilizing centrally controlled, switched capacitor...

2005-12-13T23:59:59.000Z

290

Automated Phase Design and Timing Adjustment for Signal Phase Design  

Science Conference Proceedings (OSTI)

In this paper we describe the design processes of human traffic engineers and the development of an automated system that solves the problem of timing adjustment in signal phase sequence design. i>Signal phase sequencing refers to the sequence of ... Keywords: automated design, case-based reasoning, signal phase design, traffic management

L. Wang; C. C. Hayes; R. R. Penner

2001-06-01T23:59:59.000Z

291

Automated gas transfer systems for low pressure operations  

Science Conference Proceedings (OSTI)

The introduction of new components and the modification of commercially available hardware have been instrumental in the automation of low pressure gas transfer systems. The benefits from the automation have been faster sample operation, increased precision and a safer environment for the operator.

Baker, R.W.; Hoseus, N.L.

1988-01-22T23:59:59.000Z

292

Exploring user's perception toward automated checkout trolley in developing countries  

Science Conference Proceedings (OSTI)

Retailers nowadays have relied on technology-based self-service options such as the self-checkout system to provide better customer value through pleasant shopping experience. Recently, automated checkout shopping trolley technologies have taken a further ... Keywords: automated checkout, technology management, technology-based self-service (TBSS)

Koh Peik See; Tan Shiang-Yen; Nasuha Lee Abdullah; Rosnah Idrus

2011-04-01T23:59:59.000Z

293

An automated translator for model checking time constrained workflow systems  

Science Conference Proceedings (OSTI)

Workflows have proven to be a useful conceptualization for the automation of business processes. While formal verification methods (e.g., model checking) can help ensure the reliability of workflow systems, the industrial uptake of such methods has been ... Keywords: automated translation, distributed model checking, modeling, time, workflow systems

Ahmed Shah Mashiyat; Fazle Rabbi; Hao Wang; Wendy MacCaull

2010-09-01T23:59:59.000Z

294

Automated Configuration of Algorithms for Solving Hard Computational Problems  

E-Print Network (OSTI)

Automated Configuration of Algorithms for Solving Hard Computational Problems by Frank Hutter Dipl-performing algorithms for many hard problems are highly parameterized. Selecting the best heuristics and tuning studies the automation of this important part of algorithm design: the configuration of discrete algorithm

Hutter, Frank

295

Weight control in an automated design environment. [Of aircraft  

SciTech Connect

Results of a program to study weight control in an automated design environment are presented. Automation, computer applications, design coverage and special communication problems are discussed. Results of a tube weight analysis routine, a program of weight control incentives, and results of a special weight reduction program are given.

Staton, R.N.

1987-01-01T23:59:59.000Z

296

Prototypes for automated architectural 3D-layout  

Science Conference Proceedings (OSTI)

Prototypes for automated spatial layout in architecture focus on approaches, which define occupiable space as an orthogonal 2D-grid and use algorithms to allocate each rectangle of the grid to a particular function. However, these approaches are limiting ... Keywords: 3D-modeling and automated spatial layout, euclidean and non-euclidean geometries, satisfiability

Henriette Bier; Adriaan De Jong; Niels Brouwers; Marijn Heule; Hans Van Maaren / Gijs Van Der Hoorn

2007-09-01T23:59:59.000Z

297

Efficient and effective automated surveillance agents using kernel tricks  

Science Conference Proceedings (OSTI)

Many schemes have been presented over the years to develop automated visual surveillance systems. However, these schemes typically need custom equipment, or involve significant complexity and storage requirements. In this paper we present three software-based ... Keywords: agent, automated, camera, intrusion, kernel, surveillance

Tarem Ahmed, Xianglin Wei, Supriyo Ahmed, Al-Sakib Khan Pathan

2013-05-01T23:59:59.000Z

298

Traffic measurement and analysis of building automation and control networks  

Science Conference Proceedings (OSTI)

This paper proposes a framework for a flow-based network traffic monitoring of building automation and control networks. Current approaches to monitor special environment networks are limited to checking accessibility and a state of monitored devices. ... Keywords: BACnet, BACnetflow, analysis, automation, building, control, measurement, network

Radek Krej?; Pavel ?eleda; Jakub Dobrovoln

2012-06-01T23:59:59.000Z

299

Towards automated design of MAC protocols for underwater wireless networks  

Science Conference Proceedings (OSTI)

We present a framework for the automated design of MAC protocols for underwater acoustic wireless networks. We formulate a protocol optimization problem in which the exchange of control packets is explicitly modeled. A protocol optimization program generates ... Keywords: automation, mac, network, wireless underwater protocol

Volkan Rodoplu; Amir Aminzadeh Gohari; Wei Tang

2008-09-01T23:59:59.000Z

300

The CADE-23 Automated Theorem Proving System Competition - CASC-23  

Science Conference Proceedings (OSTI)

The CADE ATP System Competition (CASC) is an annual evaluation of fully automatic, classical logic Automated Theorem Proving (ATP) systems. CASC-23 was the sixteenth competition in the CASC series. Thirty-six ATP systems and system variants competed ... Keywords: Automated theorem proving, competition

Geoff Sutcliffe

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

An application of automated reasoning in natural language question answering  

Science Conference Proceedings (OSTI)

The LogAnswer system is an application of automated reasoning to the field of open domain question answering. In order to find answers to natural language questions regarding arbitrary topics, the system integrates an automated theorem prover in a framework ... Keywords: Question answering, theorem prover

Ulrich Furbach; Ingo Glckner; Bjrn Pelzer

2010-04-01T23:59:59.000Z

302

The CADE-21 automated theorem proving system competition  

Science Conference Proceedings (OSTI)

The CADE ATP system competition (CASC) is an annual evaluation of fully automatic, first order Automated Theorem Proving (ATP) systems. CASC-21 was the twelfth competition in the CASC series. Twenty ATP systems and system variants competed in the various ... Keywords: Competition, automated theorem proving

Geoff Sutcliffe

2008-01-01T23:59:59.000Z

303

Design automation of cellular neural networks for data fusion applications  

Science Conference Proceedings (OSTI)

In this study, a novel methodology for the design automation of cellular neural networks (CNNs) for different applications is proposed. In particular, an evolvable algorithm has been developed providing the ability to generate the netlist of the requested ... Keywords: Cellular neural networks, Data fusion, Design automation, Sensor network

Prodromos Chatziagorakis; Georgios Ch. Sirakoulis; John N. Lygouras

2012-02-01T23:59:59.000Z

304

Opportunities for Energy Efficiency and Automated Demand Response in Industrial Refrigerated Warehouses in California  

E-Print Network (OSTI)

your Power. (2008). "Demand Response Programs." RetrievedS. (2008). Automated Demand Response Results from Multi-Yearusing Open Automated Demand Response, California Energy

Lekov, Alex

2009-01-01T23:59:59.000Z

305

Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings  

E-Print Network (OSTI)

below. Fig. 4 Automated demand response general features Thearchitecture Automated Demand Response System ArchitectureCould Bene?t for Demand Response Programs, But Challenges

Piette, Mary Ann

2010-01-01T23:59:59.000Z

306

Demand Response and Open Automated Demand Response Opportunities for Data Centers  

E-Print Network (OSTI)

Standardized Automated Demand Response Signals. Presented atand Automated Demand Response in Industrial RefrigeratedActions for Industrial Demand Response in California. LBNL-

Mares, K.C.

2010-01-01T23:59:59.000Z

307

Findings from Seven Years of Field Performance Data for Automated Demand Response in Commercial Buildings  

E-Print Network (OSTI)

Open Automated Demand Response Demonstration Project LBNL-2009a). Open Automated Demand Response Communications inand Actions for Industrial Demand Response in California.

Kiliccote, Sila

2010-01-01T23:59:59.000Z

308

Design and Implementation of an Open, Interoperable Automated Demand Response Infrastructure  

E-Print Network (OSTI)

of Fully Automated Demand Response in Large Facilities. CEC-Fully Automated Demand Response Tests in Large Facilities.Management and Demand Response in Commercial Building. ,

Piette, Mary Ann; Kiliccote, Sila; Ghatikar, Girish

2008-01-01T23:59:59.000Z

309

Data:C26df8ff-6cf7-41b6-ab3c-543adbd694eb | Open Energy Information  

Open Energy Info (EERE)

df8ff-6cf7-41b6-ab3c-543adbd694eb df8ff-6cf7-41b6-ab3c-543adbd694eb No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Salt River Electric Coop Corp Effective date: 2011/06/01 End date if known: Rate name: Interruptible Service Sector: Commercial Description: NUMBER AND DURATION OF INTERRUPTIONS A. Winter Season: There shall be no more than two (2) interruptions during any 24 hour calendar day. No interruption shall last more than six hours. B. Summer Season: There shall be no more than one (1) interruption during any 24 hour calendar day. No interruption shall last more than twelve hours. C. The maximum number of annual hours of interruption shall be in accordance with the customer-contracted level of interruptible service.

310

Building Technologies Office: Small- and Medium-Sized Building Automation  

NLE Websites -- All DOE Office Websites (Extended Search)

Small- and Medium-Sized Small- and Medium-Sized Building Automation and Control System Needs: Scoping Study Research Project to someone by E-mail Share Building Technologies Office: Small- and Medium-Sized Building Automation and Control System Needs: Scoping Study Research Project on Facebook Tweet about Building Technologies Office: Small- and Medium-Sized Building Automation and Control System Needs: Scoping Study Research Project on Twitter Bookmark Building Technologies Office: Small- and Medium-Sized Building Automation and Control System Needs: Scoping Study Research Project on Google Bookmark Building Technologies Office: Small- and Medium-Sized Building Automation and Control System Needs: Scoping Study Research Project on Delicious Rank Building Technologies Office: Small- and Medium-Sized Building

311

ISA Approves Standard for Wireless Automation in Process Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ISA Approves Standard for Wireless Automation in Process Control ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications September 22, 2009 - 1:28pm Addthis September 22, 2009 On September 9, the Standards and Practices Board of the International Society for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. The standard is intended to provide secure, reliable wireless operation for monitoring, alerting, and control applications. It enables robustness with non-ISA-compliant legacy wireless systems, coexistence and interoperability with other wireless devices, and robustness in harsh industrial

312

A sensor-based automation system for handling nuclear materials  

Science Conference Proceedings (OSTI)

An automated system is being developed for handling large payloads of radioactive nuclear materials in an analytical laboratory. The automation system performs unpacking and repacking of payloads from shipping and storage containers, and delivery of the payloads to the stations in the laboratory. The system uses machine vision and force/torque sensing to provide sensor-based control of the automation system in order to enhance system safety, flexibility, and robustness, and achieve easy remote operation. The automation system also controls the operation of the laboratory measurement systems and the coordination of them with the robotic system. Particular attention has been given to system design features and analytical methods that provide an enhanced level of operational safety. Independent mechanical gripper interlock and tool release mechanisms were designed to prevent payload mishandling. An extensive Failure Modes and Effects Analysis of the automation system was developed as a safety design analysis tool.

Drotning, W.; Kimberly, H.; Wapman, W.; Darras, D. [and others

1997-03-01T23:59:59.000Z

313

Developing a comprehensive training records and information system using ORACLE  

Science Conference Proceedings (OSTI)

A a result of Department of Energy orders and the need to improve the quality and management of employee training information, Westinghouse Savannah River Company (WSRC), Training Integration is charged with developing and implementing a sitewide automated and fully integrated Training Records And Information Network (TRAIN). TRAIN is a sitewide training support system developed in ORACLE for use by line management and training personnel. The TRAIN system follows the Performance-Based Training methodology and is designed to accomplish the following: support accrediation efforts; standardize training records and processes; provide management with current training information, and meet changing requirements in a timely, cost-effective manner. The system will utilize the site network to electronically access comprehensive training histories for site employees; course development information; centrally managed computer-based training; automated exam generation; course, instructor, and facility evaluation information; and automated course scheduling.

Page, C.; Winn, M.

1991-01-01T23:59:59.000Z

314

General-purpose automation programming: A case study on using a graphic language  

Science Conference Proceedings (OSTI)

Object-oriented programming is the future direction of computer programming and automation. It provides fast, easy and very reliable methodology for developing large complicated software programs to test prototype configurations and develop computer control of multiple operations. This report is part of technology transfer to assist the petroleum industry and other engineering, science and manufacturing areas by conveying background information and the benefits of this approach that were acquired during development of the data acquisition/control/analysis/presentation software to operate a high-temperature, high-pressure steamflood laboratory. NIPER developed the background and extensive applications using object-oriented programming software using National Instruments{trademark} LabVIEW{reg_sign}2 as the programming platform. The objective of developing this software was to automate the thermal lab; however, it was designed in such a way that the program would be general and could be configured to any laboratory automation during the run time. This modular program has been constructed so that application, with minor modification, can be used in other laboratory, pilot plant or commercial operations for data acquisition/control/analysist/ presentation.

Mahmood, S.M.; Olsen, D.K.

1992-10-01T23:59:59.000Z

315

General-purpose automation programming: A case study on using a graphic language  

Science Conference Proceedings (OSTI)

Object-oriented programming is the future direction of computer programming and automation. It provides fast, easy and very reliable methodology for developing large complicated software programs to test prototype configurations and develop computer control of multiple operations. This report is part of technology transfer to assist the petroleum industry and other engineering, science and manufacturing areas by conveying background information and the benefits of this approach that were acquired during development of the data acquisition/control/analysis/presentation software to operate a high-temperature, high-pressure steamflood laboratory. NIPER developed the background and extensive applications using object-oriented programming software using National Instruments{trademark} LabVIEW{reg sign}2 as the programming platform. The objective of developing this software was to automate the thermal lab; however, it was designed in such a way that the program would be general and could be configured to any laboratory automation during the run time. This modular program has been constructed so that application, with minor modification, can be used in other laboratory, pilot plant or commercial operations for data acquisition/control/analysist/ presentation.

Mahmood, S.M.; Olsen, D.K.

1992-10-01T23:59:59.000Z

316

Corporate Information Systems | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Corporate Information Systems Corporate Information Systems Corporate Information Systems The mission of the Office of Corporate Information Systems (CF-40) is to plan and manage the design, development, operation and maintenance of the Department's Integrated Management Navigation (iManage) program and projects; identify and implement business process automation initiatives; provide technical support for legacy systems operations and maintenance; provide technical support for web design, development and maintenance; manage cyber security and enterprise architecture activities; and serve as the liaison to Chief Information Officer for Information Technology services. Functions: Plan and manage the design, integration, and implementation of the Department's corporate business systems through the iManage program,

317

Open Automated Demand Response Dynamic Pricing Technologies and Demonstration  

SciTech Connect

This study examines the use of OpenADR communications specification, related data models, technologies, and strategies to send dynamic prices (e.g., real time prices and peak prices) and Time of Use (TOU) rates to commercial and industrial electricity customers. OpenADR v1.0 is a Web services-based flexible, open information model that has been used in California utilities' commercial automated demand response programs since 2007. We find that data models can be used to send real time prices. These same data models can also be used to support peak pricing and TOU rates. We present a data model that can accommodate all three types of rates. For demonstration purposes, the data models were generated from California Independent System Operator's real-time wholesale market prices, and a California utility's dynamic prices and TOU rates. Customers can respond to dynamic prices by either using the actual prices, or prices can be mapped into"operation modes," which can act as inputs to control systems. We present several different methods for mapping actual prices. Some of these methods were implemented in demonstration projects. The study results demonstrate show that OpenADR allows interoperability with existing/future systems/technologies and can be used within related dynamic pricing activities within Smart Grid.

Ghatikar, Girish; Mathieu, Johanna L.; Piette, Mary Ann; Koch, Ed; Hennage, Dan

2010-08-02T23:59:59.000Z

318

Pulse code modulation data compression for automated test equipment  

SciTech Connect

Development of automated test equipment for an advanced telemetry system requires continuous monitoring of PCM data while exercising telemetry inputs. This requirements leads to a large amount of data that needs to be stored and later analyzed. For example, a data stream of 4 Mbits/s and a test time of thirty minutes would yield 900 Mbytes of raw data. With this raw data, information needs to be stored to correlate the raw data to the test stimulus. This leads to a total of 1.8 Gb of data to be stored and analyzed. There is no method to analyze this amount of data in a reasonable time. A data compression method is needed to reduce the amount of data collected to a reasonable amount. The solution to the problem was data reduction. Data reduction was accomplished by real time limit checking, time stamping, and smart software. Limit checking was accomplished by an eight state finite state machine and four compression algorithms. Time stamping was needed to correlate stimulus to the appropriate output for data reconstruction. The software was written in the C programming language with a DOS extender used to allow it to run in extended mode. A 94--98% compression in the amount of data gathered was accomplished using this method. 1 fig.

Navickas, T.A.; Jones, S.G.

1991-05-01T23:59:59.000Z

319

Automated Spot Weld Inspection using Infrared Thermography  

Science Conference Proceedings (OSTI)

An automated non-contact and non-destructive resistance spot weld inspection system based on infrared (IR) thermography was developed for post-weld applications. During inspection, a weld coupon was heated up by an auxiliary induction heating device from one side of the weld, while the resulting thermal waves on the other side were observed by an IR camera. The IR images were analyzed to extract a thermal signature based on normalized heating time, which was then quantitatively correlated to the spot weld nugget size. The use of normalized instead of absolute IR intensity was found to be useful in minimizing the sensitivity to the unknown surface conditions and environment interference. Application of the IR-based inspection system to different advanced high strength steels, thickness gauges and coatings were discussed.

Chen, Jian [ORNL; Zhang, Wei [ORNL; Yu, Zhenzhen [ORNL; Feng, Zhili [ORNL

2012-01-01T23:59:59.000Z

320

Automated startup of the MIT research reactor  

SciTech Connect

This summary describes the development, implementation, and testing of a generic method for performing automated startups of nuclear reactors described by space-independent kinetics under conditions of closed-loop digital control. The technique entails first obtaining a reliable estimate of the reactor's initial degree of subcriticality and then substituting that estimate into a model-based control law so as to permit a power increase from subcritical on a demanded trajectory. The estimation of subcriticality is accomplished by application of the perturbed reactivity method. The shutdown reactor is perturbed by the insertion of reactivity at a known rate. Observation of the resulting period permits determination of the initial degree of subcriticality. A major advantage to this method is that repeated estimates are obtained of the same quantity. Hence, statistical methods can be applied to improve the quality of the calculation.

Kwok, K.S. (Massachusetts Inst. of Tech., Cambridge (United States))

1992-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

An automated neutron monitor maintenance system  

Science Conference Proceedings (OSTI)

Neutron detectors are commonly used by the nuclear materials processing industry to monitor fissile materials in process vessels and tanks. The proper functioning of these neutron monitors must be periodically evaluated. We have developed and placed in routine use a PC-based multichannel analyzer (MCA) system for on-line BF3 and He-3 gas-filled detector function testing. The automated system: 1) acquires spectral data from the monitor system, 2) analyzes the spectrum to determine the detector`s functionality, 3) makes suggestions for maintenance or repair, as required, and 4) saves the spectrum and results to disk for review. The operator interface has been designed to be user-friendly and to minimize the training requirements of the user. The system may also be easily customized for various applications

Moore, F.S.; Griffin, J.C.; Odell, D.M.C.

1996-09-01T23:59:59.000Z

322

Honeywell modular automation system computer software documentation  

SciTech Connect

The purpose of this Computer Software Document (CSWD) is to provide configuration control of the Honeywell Modular Automation System (MAS) in use at the Plutonium Finishing Plant (PFP). The Honeywell MAS is used to control the thermal stabilization furnaces in glovebox HA-211. The PFP developed software is being updated to reflect the Polycube Processing and Unwashed Salt Thermal Stabilization program addition. The polycube processing program was installed per HNF-FMP-02-11162-R2. The functional test of the program was performed in JCS work package 22-02-1031, The unwashed salt item program was installed per HNF-FMP-03-16577-RO. The functional test of the program completed in JCS work package 22-03-00654.

STUBBS, A.M.

2003-07-02T23:59:59.000Z

323

Automated Fuel Element Closure Welding System  

SciTech Connect

The Automated Fuel Element Closure Welding System is a robotic device that will load and weld top end plugs onto nuclear fuel elements in a highly radioactive and inert gas environment. The system was developed at Argonne National Laboratory-West as part of the Fuel Cycle Demonstration. The welding system performs four main functions, it (1) injects a small amount of a xenon/krypton gas mixture into specific fuel elements, and (2) loads tiny end plugs into the tops of fuel element jackets, and (3) welds the end plugs to the element jackets, and (4) performs a dimensional inspection of the pre- and post-welded fuel elements. The system components are modular to facilitate remote replacement of failed parts. The entire system can be operated remotely in manual, semi-automatic, or fully automatic modes using a computer control system. The welding system is currently undergoing software testing and functional checkout.

Wahlquist, D.R.

1993-01-01T23:59:59.000Z

324

Automated Fuel Element Closure Welding System  

SciTech Connect

The Automated Fuel Element Closure Welding System is a robotic device that will load and weld top end plugs onto nuclear fuel elements in a highly radioactive and inert gas environment. The system was developed at Argonne National Laboratory-West as part of the Fuel Cycle Demonstration. The welding system performs four main functions, it (1) injects a small amount of a xenon/krypton gas mixture into specific fuel elements, and (2) loads tiny end plugs into the tops of fuel element jackets, and (3) welds the end plugs to the element jackets, and (4) performs a dimensional inspection of the pre- and post-welded fuel elements. The system components are modular to facilitate remote replacement of failed parts. The entire system can be operated remotely in manual, semi-automatic, or fully automatic modes using a computer control system. The welding system is currently undergoing software testing and functional checkout.

Wahlquist, D.R.

1993-03-01T23:59:59.000Z

325

Obstacle detectors for automated transit vehicles: a technoeconomic and market analysis  

SciTech Connect

A search was conducted to identify the technical and economic characteristics of both NASA and nonNASA obstacle detectors. The findings, along with market information were compiled and analyzed for consideration by DOT and NASA in decisions about any future automated transit vehicle obstacle detector research, development, or applications project. Currently available obstacle detectors and systems under development are identified by type (sonic, capacitance, infrared/optical, guided radar, and probe contact) and compared with the three NASA devices selected as possible improvements or solutions to the problems in existing obstacle detection systems. Cost analyses and market forecasts individually for the AGT and AMTV markets are included.

Lockerby, C.E.

1979-12-01T23:59:59.000Z

326

Microsoft Word - Wireless Automation World for OE FINAL.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Automation World Features New White Paper on Wireless Security, Interviews Authors Automation World Features New White Paper on Wireless Security, Interviews Authors April 16, 2009 The April 2009 issue of Automation World magazine features the white paper Wireless Systems Considerations When Implementing NERC Critical Infrastructure Protection Standards. The paper addresses wireless protection issues arising from requirements of the Critical Infrastructure Protection (CIP) Standards for the electricity sector, developed by the North American Electric Reliability Corporation (NERC). The CIP standards require entities to monitor and control all electronic access to a company's electronic security perimeter, but this requirement becomes difficult to implement when it

327

Distribution automation. (Latest citations from the INSPEC database). Published Search  

SciTech Connect

The bibliography contains citations concerning distribution automation for the electric power utility industry. Distribution automation comprises a combination of real-time load monitoring; detailed modeling of the distribution, generation, transmission, and customer systems; and remote control of devices. Distribution automation achieves energy conservation by reduction of consumption, lower losses in distribution and transmission mission circuits, and reduction of peak load. Topics covered include demand-side management, telecontrol, distribution networks, communications software, and cost-benefit analyses. (Contains a minimum of 93 citations and includes a subject term index and title list.)

Not Available

1994-12-01T23:59:59.000Z

328

To Wave Or Not To Wave? Order Release Policies for Warehouses with an Automated Sorter  

E-Print Network (OSTI)

Wave-based release policies are prevalent in warehouses with an automated sorter, and take different

Gallien, Jrmie

2008-09-08T23:59:59.000Z

329

Information Products Laboratory for Emergency Response (IPLER)  

E-Print Network (OSTI)

Technology and Information Products for Emergency Response #12;2 IPLER Problem Statement · Disaster response #12;9 NSF Rapid, Google Studies · NSF RAPID: Automated Target Detection Tool for Disaster Response Support Technologies for Environmental Forecasting and Disaster Response" o Supports the national need

Zanibbi, Richard

330

The information furnace: consolidated home control  

Science Conference Proceedings (OSTI)

?The Information Furnace is a basement-installed PC-type device that integrates existing consumer home-control, infotainment, security and communication technologies to transparently provide accessible and value-added services. A modern home contains ... Keywords: Automation, Consumer electronics, Home-control, Multi-modal interfaces

Diomidis D. Spinellis

2003-05-01T23:59:59.000Z

331

Exploring the inherent benefits of RFID and automated self-serve checkouts in a B2C environment  

Science Conference Proceedings (OSTI)

Automated identification services such as RFID and self-serve checkouts that require many different technological components in order to successfully operate and be accepted in a B2C (Business-to-Customer) environment. In theory, ... Keywords: B2C, CRM, RFID, SCM, autoID, automatic identification, business information systems, business-to-, customer, customer relationship management, radio frequency identification, retail grocery, retailing, self service checkouts, self-checkout, strategy, supply chain management, technology adoption

Alan D. Smith

2005-07-01T23:59:59.000Z

332

Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

340E 340E Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings M.A. Piette, G. Ghatikar, S. Kiliccote, D. Watson Lawrence Berkeley National Laboratory E. Koch, D. Hennage Akuacom June 2009 Journal of Computing Science and Information Engineering, Vol. 9, Issue 2 DISCLAIMER This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information,

333

Radioanalytical Chemistry for Automated Nuclear Waste Process Monitoring  

Science Conference Proceedings (OSTI)

The objectives of our research were to develop the first automated radiochemical process analyzer including sample pretreatment methodoology, and to initiate work on new detection approaches, especially using modified diode detectors.

Jay W. Grate; Timothy A. DeVol

2006-07-20T23:59:59.000Z

334

ISA Approves Standard for Wireless Automation in Process Control Applications  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications September 22, 2009 On September 9, the Standards and Practices Board of the International Society for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. The standard is intended to provide secure, reliable wireless operation for monitoring, alerting, and control applications. It enables robustness with non-ISA-compliant legacy wireless systems, coexistence and interoperability with other wireless devices, and robustness in harsh industrial environments. To meet the needs of industrial wireless users and operators of low-energy fixed, portable, and moving

335

Java Automation Controller and Real-Time Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Java Automation Controller and Real-Time Systems Java Automation Controller and Real-Time Systems Speaker(s): Greg Bollella Date: June 29, 2009 - 12:00pm Location: 90-3122 Java has always been a disruptive technology and now it is breaking the mold in industrial, process, building, and transportation automation systems. For many years, programmable logic controllers (PLCs), the digital versions of old relay-based control systems (such as that used in the NYC Subway system in the late 1800s) have primarily controlled these systems. PLCs are the workhorses of the controls industry but the market is characterized by proprietary, closed, expensive, special-purpose solutions. A Java-based automation controller breaks the mold by allowing control algorithms, which require strict real-time capabilities, to run on

336

Industrial SPP/Partner Teaming Profile - Rockwell Automation  

NLE Websites -- All DOE Office Websites (Extended Search)

Rockwell Automation Rockwell Automation 6400 West Enterprise Drive Mequon, WI 53092 Business: Control Products & Solutions Joshua J. Olive Sr. Product Specialist Phone: 262-512-2095 Email: jjolive@ra.rockwell.com Industrial Partner General Mills 9000 Plymouth Ave. North Minneapolis, MN 55427 Business: Food Processing David Spryshak Facilities, Control, & IS Engineer Phone: 763-764-7091 Email: Dave.spryshak@genmills.com Rockwell Automation helps General Mills save $2.6 million annually through a standardized energy management system for air handling units Project Scope Rockwell Automation partnered with General Mills to develop a standardized energy management system (EMS) for controlling air handling units (AHU) and has installed the system at 14 General Mills

337

Price Server System for Automated Critical Peak Pricing  

NLE Websites -- All DOE Office Websites (Extended Search)

Price Server System for Automated Critical Peak Pricing Price Server System for Automated Critical Peak Pricing Speaker(s): David S. Watson Date: June 3, 2005 - 12:00pm Location: 90-3148 Overview of current California Energy Commission (CEC)/Demand Response Research Center (DRRC) Auto-CPP project: This summer, some select commercial CPP customers of PG&E will have the option of joining the Automated Critical Peak Pricing pilot. The pilot will have the same tariffs as standard CPP programs, but will include an added feature: automated shedding of electric loads. Through use of the Price Server System, day-ahead CPP event signals initiated by PG&E will ultimately cause electric loads to be automatically curtailed on commercial customer sites. These optional predetermined shed strategies will occur without

338

Global health response more accurate with automated influenza surveillance  

NLE Websites -- All DOE Office Websites (Extended Search)

Global health response more accurate with automated influenza Global health response more accurate with automated influenza surveillance Global health response more accurate with automated influenza surveillance Public health officials will be able to determine whether an outbreak of an infectious disease comes from a pandemic strain or one less virulent. January 31, 2011 Lance Green of LANL tests an earlier version of a modular laboratory like the ones that will be part of the High-Throughput Laboratory Network Lance Green of LANL tests an earlier version of a modular laboratory like the ones that will be part of the High-Throughput Laboratory Network-a series of compact, self-contained, automated systems for surveillance and screening of potential pandemic strains of influenza and other deadly infectious diseases.

339

Monitoring Free-Water Evaporation at Automated Weather Stations  

Science Conference Proceedings (OSTI)

The automation of weather stations necessitates an alternative approach to the traditional manual measure of free-water evaporation made using a class A pan. This study compared commercially available water-level sensing transducers mounted on ...

S. M. McGinn; H. D. J. McLean

1995-12-01T23:59:59.000Z

340

Comprehensive Automated Quality Assurance of Daily Surface Observations  

Science Conference Proceedings (OSTI)

This paper describes a comprehensive set of fully automated quality assurance (QA) procedures for observations of daily surface temperature, precipitation, snowfall, and snow depth. The QA procedures are being applied operationally to the Global ...

Imke Durre; Matthew J. Menne; Byron E. Gleason; Tamara G. Houston; Russell S. Vose

2010-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

A simulation tool for automated platooning in mixed highway scenarios  

Science Conference Proceedings (OSTI)

Automated platooning is one of the most challenging fields in the domain of Intelligent Transportation Systems (ITS). Conceptually, platooning means creating clusters of vehicles which closely follow each other autonomously without action of the driver, ...

Michele Segata; Falko Dressler; Renato Lo Cigno; Mario Gerla

2013-02-01T23:59:59.000Z

342

Summary of the 2006 Automated Demand Response Pilot  

E-Print Network (OSTI)

This paper discusses the specific concept for, design of, and results from a pilot program to automate demand response with critical peak pricing. California utilities have been exploring the use of critical peak pricing (CPP) to help reduce peak day summer time electric loads. CPP is a form of price-responsive demand response. This Automated Critical Peak Pricing (Auto-CPP) project from 2006 draws upon three years of previous research and demonstrations from the years of 2003, 2004, and 2005. The purpose of automated demand response (DR) is to improve the responsiveness and participation of electricity customers in DR programs and lower overall costs to achieve DR. Auto-CPP is a form of automated demand response (Auto-DR).

Piette, M.; Kiliccote, S.

2007-01-01T23:59:59.000Z

343

Automated electricity demand response - Tech Close-Up  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated electricity demand response - Tech Close-Up Click here to view this video Date: August 27, 2013 Presenter(s): Many, including EETD's Mary Ann Piette. A Tech Close-Up news...

344

Automated Video Analysis of Animal Movements Using Gabor Orientation Filters  

E-Print Network (OSTI)

a Single frame from a video clip, after de-interlacing.median of all frames in the video sequence. c The output of010-9062-1 Automated Video Analysis of Animal Movements

Wagenaar, Daniel A.; Kristan, Wiliam B.

2010-01-01T23:59:59.000Z

345

Development of an Automated Classification Procedure for Rainfall Systems  

Science Conference Proceedings (OSTI)

An automated procedure for classifying rainfall systems (meso-? scale and larger) was developed using an operational analysis of hourly precipitation estimates from radar and rain gauge data. The development process followed two main phases: a ...

Michael E. Baldwin; John S. Kain; S. Lakshmivarahan

2005-04-01T23:59:59.000Z

346

Decisions in the perspective automated artillery fire support  

Science Conference Proceedings (OSTI)

This paper is focused on decisions in the future Automated Artillery Fire Support Control System. Artillery units of the Army of the Czech Republic, reflecting current global security neighborhood, can be used outside the Czech Republic. The paper presents ...

M. Blaha; L. Potuk

2011-10-01T23:59:59.000Z

347

Operational Automated Graphics at the National Climatic Data Center  

Science Conference Proceedings (OSTI)

In January 1987 the National Climatic Data Center introduced automated graphics into its Climatological Data publications. The publications, which are produced for each state and distributed to thousands of subscribers monthly, have, in the past, ...

Michael Crowe; Thomas Reek; Robert Mattingly

1988-01-01T23:59:59.000Z

348

Toward Automated Interpretation of Satellite Imagery for Navy Shipboard Applications  

Science Conference Proceedings (OSTI)

The U.S. Navy has plans to develop an automated system to analyze satellite imagery aboard its ships at sea. Lack of time for training, in combination with frequent personnel rotations, precludes the building of extensive imagery interpretation ...

James E. Peak; Paul M. Tag

1992-07-01T23:59:59.000Z

349

Intelligent and collaborative embedded computing in automation engineering  

Science Conference Proceedings (OSTI)

This paper presents an overview of the the novel technologies that we are experiencing today in the automation industries. We present the opportunities and challenges of having tightly coupled collaborative networks of embedded systems for controlling ...

Mohammad Abdullah Al Faruque; Arquimedes Canedo

2012-03-01T23:59:59.000Z

350

Assessing the performance of human-automation collaborative planning systems  

E-Print Network (OSTI)

Planning and Resource Allocation (P/RA) Human Supervisory Control (HSC) systems utilize the capabilities of both human operators and automated planning algorithms to schedule tasks for complex systems. In these systems, ...

Ryan, Jason C. (Jason Christopher)

2011-01-01T23:59:59.000Z

351

Face occlusion detection for automated teller machine surveillance  

Science Conference Proceedings (OSTI)

Real time automatic alarm systems play an essential role in security management, as evidenced by the surveillance cameras installed in nearly all automated teller machines (ATMs). Whereas manual video surveillance requires constant staff monitoring, ...

Daw-Tung Lin; Ming-Ju Liu

2006-12-01T23:59:59.000Z

352

Human-automation collaborative RRT for UAV mission path planning  

E-Print Network (OSTI)

Future envisioned Unmanned Aerial Vehicle (UAV) missions will be carried out in dynamic and complex environments. Human-automation collaboration will be required in order to distribute the increased mission workload that ...

Caves, Amrico De Jess (Caves Corral)

2010-01-01T23:59:59.000Z

353

Wireless home automation networks: a survey of architectures and technologies  

Science Conference Proceedings (OSTI)

Wireless home automation networks comprise wireless embedded sensors and actuators that enable monitoring and control applications for home user comfort and efficient home management. This article surveys the main current and emerging solutions that ...

Carles Gomez; Josep Paradells

2010-06-01T23:59:59.000Z

354

V-132: IBM Tivoli System Automation Application Manager Multiple...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3.1, 3.2, 3.2.1, and 3.2.2 ABSTRACT: Multiple security vulnerabilities exist in the IBM Java Runtime Environment component of IBM Tivoli System Automation Application Manager which...

355

Automated generation of kinetic chemical mechanisms using rewriting  

Science Conference Proceedings (OSTI)

Several software systems have been developed recently for the automated generation of combustion reactions kinetic mechanisms using different representations of species and reactions and different generation algorithms. In parallel, several software ...

Olivier Bournez; Guy-Marie Cme; Valrie Conraud; Hlne Kirchner; Liliana Ib?nescu

2003-06-01T23:59:59.000Z

356

An Automated Radar Technique for the Identification of Tropical Precipitation  

Science Conference Proceedings (OSTI)

A radar-based automated technique for the identification of tropical precipitation was developed to improve quantitative precipitation estimation during extreme rainfall events. The technique uses vertical profiles of reflectivity to identify the ...

Xiaoyong Xu; Kenneth Howard; Jian Zhang

2008-10-01T23:59:59.000Z

357

Exploiting home automation protocols for load monitoring in smart buildings  

Science Conference Proceedings (OSTI)

Monitoring and controlling electrical loads is crucial for demand-side energy management in smart grids. Home automation (HA) protocols, such as X10 and Insteon, have provided programmatic load control for many years, and are being widely deployed in ...

David Irwin; Sean Barker; Aditya Mishra; Prashant Shenoy; Anthony Wu; Jeannie Albrecht

2011-11-01T23:59:59.000Z

358

Automated reaction mechanism generation : improving accuracy and broadening scope  

E-Print Network (OSTI)

Chemical kinetic modeling plays an important role in the study of reactive chemical systems. Thus, an automated means of constructing chemical kinetic models forms a useful tool in the engineering and science surrounding ...

Magoon, Gregory Russell

2012-01-01T23:59:59.000Z

359

State-of-the-art automated process simulation systems  

Science Conference Proceedings (OSTI)

The control and engineering tasks accomplished with the help of automated process simulation systems are described. The practical solution examples are cited. The UniSim Design system, providing modeling of all stages of production cycle, is described.

V. M. Dozortsev; E. Yu. Kreidlin

2010-09-01T23:59:59.000Z

360

Proceedings of the 45th annual Design Automation Conference  

Science Conference Proceedings (OSTI)

Welcome to the 45th Design Automation Conference and the City of Anaheim! DAC is the premier event for the electronic design community. It offers the industry's most prestigious technical conference in combination with the biggest exhibition. DAC is ...

Limor Fix

2008-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Modelling and automated composition of user-centric services  

Science Conference Proceedings (OSTI)

User-centric services bring additional constraints to the problem of automated service composition. While in business-centric settings the services are orchestrated in order to accomplish a specific business task, user-centric service composition should ...

Raman Kazhamiakin; Massimo Paolucci; Marco Pistore; Heorhi Raik

2010-10-01T23:59:59.000Z

362

Automated construction technologies : analyses and future development strategies  

E-Print Network (OSTI)

Substandard productivity and the lack of skilled workers in the construction industry have led major corporations all over the world aiming to produce various types of automated construction technologies. During the process, ...

Hoang, Han (Han Mai)

2005-01-01T23:59:59.000Z

363

Proceedings of the 42nd annual Design Automation Conference  

Science Conference Proceedings (OSTI)

Welcome to the 42nd Design Automation Conference and the city of Anaheim! More than ever, DAC is the place where researchers and developers, industry and academia, exhibitors and their customers come to learn about the latest breakthroughs, the latest ...

William H. Joyner, Jr.; Grant E. Martin; Andrew B. Kahng

2005-06-01T23:59:59.000Z

364

A Generative Model for Statistical Determination of Information Content from Conversation Threads  

Science Conference Proceedings (OSTI)

We present a generative model for determining the information content of a message without analyzing the message content. Such a tool is useful for automated analysis of the vast contents of online communication which are extensively contaminated by ...

Yingjie Zhou; Malik Magdon-Ismail; William A. Wallace; Mark Goldberg

2008-06-01T23:59:59.000Z

365

Documenting Storm Severity in the Mid-Atlantic Region Using Lightning and Radar Information  

Science Conference Proceedings (OSTI)

Storm severity in the mid-Atlantic region of the United States is examined using lightning, radar, and model-derived information. Automated Warning Decision Support System (WDSS) procedures are developed to create grids of lightning and radar ...

Scott D. Rudlosky; Henry E. Fuelberg

2013-09-01T23:59:59.000Z

366

Installation and Commissioning Automated Demand Response Systems  

E-Print Network (OSTI)

Information System or Energy Management System (EMCS) so aimplementation in energy management systems. This effort isTC): Trained energy management control system vendors were

Kiliccote, Sila; Global Energy Partners; Pacific Gas and Electric Company

2008-01-01T23:59:59.000Z

367

Automated Anatomical Labeling of Bronchial Branches Extracted ...  

Science Conference Proceedings (OSTI)

1. Graduate School of Information Science, Nagoya University, kensaku@is. nagoya-u.ac.jp. 2. Innovative Research Center for Preventive Medical Engineering,...

368

Automated Demand Response Opportunities in Wastewater Treatment Facilities  

Science Conference Proceedings (OSTI)

Wastewater treatment is an energy intensive process which, together with water treatment, comprises about three percent of U.S. annual energy use. Yet, since wastewater treatment facilities are often peripheral to major electricity-using industries, they are frequently an overlooked area for automated demand response opportunities. Demand response is a set of actions taken to reduce electric loads when contingencies, such as emergencies or congestion, occur that threaten supply-demand balance, and/or market conditions occur that raise electric supply costs. Demand response programs are designed to improve the reliability of the electric grid and to lower the use of electricity during peak times to reduce the total system costs. Open automated demand response is a set of continuous, open communication signals and systems provided over the Internet to allow facilities to automate their demand response activities without the need for manual actions. Automated demand response strategies can be implemented as an enhanced use of upgraded equipment and facility control strategies installed as energy efficiency measures. Conversely, installation of controls to support automated demand response may result in improved energy efficiency through real-time access to operational data. This paper argues that the implementation of energy efficiency opportunities in wastewater treatment facilities creates a base for achieving successful demand reductions. This paper characterizes energy use and the state of demand response readiness in wastewater treatment facilities and outlines automated demand response opportunities.

Thompson, Lisa; Song, Katherine; Lekov, Alex; McKane, Aimee

2008-11-19T23:59:59.000Z

369

Collaborative recommender systems for building automation  

E-Print Network (OSTI)

Building Automation Systems (BASs) can save building owners money by reducing energy consumption while simultaneously preserving occupant comfort. There are algorithms that optimize this tradeoff, such as detecting which appliances are turned on without requiring expensive status detectors to be attached to each appliance. However, better ways are needed to determine which algorithms are best-suited to a particular building. This paper explores the idea of allowing building managers to automatically communicate among themselves and exchange ratings of individual monitoring and control algorithms in such a way that each building manager can then obtain predicted ratings for all algorithms that he has not yet tried personally. We allow individual algorithms to be replaced by using a blackboard architecture to loosen the coupling between them. We propose a recommender system that operates on a database of contributed ratings to predict ratings of untried algorithms. To explore this approach, we developed a prototype that seamlessly interacts with both emulated physical buildings and buildings simulated in software and we implemented several of the control algorithms described in previous works. We demonstrate a recommender system that selects between algorithms in various types of buildings. 1.

Michael Lemay; Jason J. Haas; Carl A. Gunter

2009-01-01T23:59:59.000Z

370

THE QUASIPERIODIC AUTOMATED TRANSIT SEARCH ALGORITHM  

Science Conference Proceedings (OSTI)

We present a new algorithm for detecting transiting extrasolar planets in time-series photometry. The Quasiperiodic Automated Transit Search (QATS) algorithm relaxes the usual assumption of strictly periodic transits by permitting a variable, but bounded, interval between successive transits. We show that this method is capable of detecting transiting planets with significant transit timing variations without any loss of significance-{sup s}mearing{sup -}as would be incurred with traditional algorithms; however, this is at the cost of a slightly increased stochastic background. The approximate times of transit are standard products of the QATS search. Despite the increased flexibility, we show that QATS has a run-time complexity that is comparable to traditional search codes and is comparably easy to implement. QATS is applicable to data having a nearly uninterrupted, uniform cadence and is therefore well suited to the modern class of space-based transit searches (e.g., Kepler, CoRoT). Applications of QATS include transiting planets in dynamically active multi-planet systems and transiting planets in stellar binary systems.

Carter, Joshua A. [Harvard-Smithsonian Center for Astrophysics, 60 Garden St., Cambridge, MA 02138 (United States); Agol, Eric [Department of Astronomy, Box 351580, University of Washington, Seattle, WA 98195 (United States)

2013-03-10T23:59:59.000Z

371

Automation Enhancement of Multilayer Laue Lenses  

SciTech Connect

X-ray optics fabrication at Brookhaven National Laboratory has been facilitated by a new, state of the art magnetron sputtering physical deposition system. With its nine magnetron sputtering cathodes and substrate carrier that moves on a linear rail via a UHV brushless linear servo motor, the system is capable of accurately depositing the many thousands of layers necessary for multilayer Laue lenses. I have engineered a versatile and automated control program from scratch for the base system and many subsystems. Its main features include a custom scripting language, a fully customizable graphical user interface, wireless and remote control, and a terminal-based interface. This control system has already been successfully used in the creation of many types of x-ray optics, including several thousand layer multilayer Laue lenses.Before reaching the point at which a deposition can be run, stencil-like masks for the sputtering cathodes must be created to ensure the proper distribution of sputtered atoms. Quality of multilayer Laue lenses can also be difficult to measure, given the size of the thin film layers. I employ my knowledge of software and algorithms to further ease these previously painstaking processes with custom programs. Additionally, I will give an overview of an x-ray optic simulator package I helped develop during the summer of 2010. In the interest of keeping my software free and open, I have worked mostly with the multiplatform Python and the PyQt application framework, utilizing C and C++ where necessary.

Lauer K. R.; Conley R.

2010-12-01T23:59:59.000Z

372

Developing Automated Methods of Waste Sorting  

SciTech Connect

The U.S. Department of Energy (DOE) analyzed the need complex-wide for remote and automated technologies as they relate to the treatment and disposal of mixed wastes. This analysis revealed that several DOE sites need the capability to open drums containing waste, visually inspect and sort the contents, and finally repackage the containers that are acceptable at a waste disposal facility such as the Waste Isolation Pilot Plant (WIPP) in New Mexico. Conditioning contaminated waste so that it is compatible with the WIPP criteria for storage is an arduous task whether the waste is contact handled (waste having radioactivity levels below 200 mrem/hr) or remote handled. Currently, WIPP non-compliant items are removed from the waste stream manually, at a rate of about one 55-gallon drum per day. Issues relating to contamination-based health hazards as well as repetitive motion health hazards are steering industry towards a more user-friendly, method of conditioning or sorting waste.

Shurtliff, Rodney Marvin

2002-08-01T23:59:59.000Z

373

Information extraction from concise passages of natural language sources  

Science Conference Proceedings (OSTI)

This paper will present a semi-automated approach for information extraction for ontology construction. The sources used are short news extracts syndicated online. These are used because they contain short passages which provide information in a concise ... Keywords: POS tagging, knowledge engineering, knowledge extraction, knowledge formalization, named entity recognition, natural language processing, ontology construction, ontology population

Sandi Pohorec; Mateja Verli?; Milan Zorman

2010-09-01T23:59:59.000Z

374

Process development for automated solar cell and module production. Task 4: automated array assembly. Quarterly report No. 2  

DOE Green Energy (OSTI)

Installation of the cell preparation station into its new enclosure is now complete and operation verification tests have been performed. The detailed layout drawings of the Automated Lamination Station have been produced and construction has begun. All major and most minor components have been delivered by vendors. The station framework has been built and assembly of components is underway. The final drawings for the Automated Vacuum Chamber are being completed and the first in-house components are being fabricated.

Hagerty, J. J.

1981-01-15T23:59:59.000Z

375

Process development for automated solar-cell and module production. Task 4. Automated array assembly. Quarterly report No. 3  

DOE Green Energy (OSTI)

The Automated Lamination Station is mechanically complete and is currently undergoing final wiring. The high current driver and isolator boards have been completed and installed, and the main interface board is under construction. The automated vacuum chamber has had a minor redesign to increase stiffness and improve the cover open/close mechanism. Design of the Final Assembly Station has been completed and construction is underway.

Hagerty, J. J.; Gifford, M.

1981-04-15T23:59:59.000Z

376

TAMPERE UNIVERSITY OF TECHNOLOGY DEPARTMENT OF AUTOMATION  

E-Print Network (OSTI)

Maintenance Management System Manufacturing Execution Control Process Control Enterprise Resource Planning ERP activities are supported by Computerized Maintenance Management Systems (CMMS), which are basically database management. Because of its database centered nature, maintenance information system can easily be integrated

377

Automated Generation of Context-Aware Tests  

Science Conference Proceedings (OSTI)

The incorporation of context-awareness capabilities into pervasive applications allows them to leverage contextual information to provide additional services while maintaining an acceptable quality of service. These added capabilities, however, introduce ...

Zhimin Wang; Sebastian Elbaum; David S. Rosenblum

2007-05-01T23:59:59.000Z

378

Findings from Seven Years of Field Performance Data for Automated Demand Response in Commercial Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

3E 3E Findings from Seven Years of Field Performance Data for Automated Demand Response in Commercial Buildings S. Kiliccote, M.A. Piette, J. Mathieu, K. Parrish Environmental Energy Technologies Division May 2010 Presented at the 2010 ACEEE Summer Study on Energy Efficiency in Buildings, Pacific Grove, CA, August 15-20, 2010, and published in the Proceedings DISCLAIMER This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information,

379

The NIF DISCO Framework: Facilitating Automated Integration of Neuroscience Content on the Web  

E-Print Network (OSTI)

Abstract This paper describes the capabilities of DISCO, an extensible approach that supports integrative Web-based information dissemination. DISCO is a component of the Neuroscience Information Framework (NIF), an NIH Neuroscience Blueprint initiative that facilitates integrated access to diverse neuroscience resources via the Internet. DISCO facilitates the automated maintenance of several distinct capabilities using a collection of files 1) that are maintained locally by the developers of participating neuroscience resources and 2) that are harvested on a regular basis by a central DISCO server. This approach allows central NIF capabilities to be updated as each resources content changes over time. DISCO currently supports the following capabilities: 1) resource descriptions, 2) LinkOut to a resources data items from NCBI Entrez resources such as PubMed, 3) Web-based interoperation with a resource, 4) sharing a resources lexicon and

Luis Marenco; Rixin Wang; Gordon M. Shepherd; Perry L. Miller; L. Marenco; L. Marenco; R. Wang; P. L. Miller; G. M. Shepherd; P. L. Miller

2010-01-01T23:59:59.000Z

380

Data:7c82aec2-807a-45d5-839e-5db3fb95a242 | Open Energy Information  

Open Energy Info (EERE)

aec2-807a-45d5-839e-5db3fb95a242 aec2-807a-45d5-839e-5db3fb95a242 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: City of Stilwell, Oklahoma (Utility Company) Effective date: End date if known: Rate name: Special Events Sector: Description: $50.00 per each 24-hours paid in advance. Source or reference: Source Parent: Comments Applicability Demand (kW) Minimum (kW): Maximum (kW): History (months): Energy (kWh) Minimum (kWh): Maximum (kWh): History (months): Service Voltage Minimum (V): Maximum (V): Character of Service Voltage Category: Phase Wiring: << Previous 1 2 3 Next >> << Previous 1 2 3 Next >>

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Automated roller shades : Daylighting The New York Times Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated roller shades Automated roller shades Overview The architectural approach The owner's approach Daylighting field study Daylighting control systems Automated roller shades Procurement specifications Shades and Shade Controls Lighting Controls Visualizing daylight Commissioning/ verification Demand response Mainstream solutions Post-occupancy evaluation Publications Sponsors Project team Automated roller shades Automated roller shades manage daylight, solar heat gains, view, glare, privacy, and building appearance through changes in shade height. A roller shade consists of a fabric wrapped around a horizontal tube, which contains a tubular motor. The tubular motor rotates when ac- or dc- power is applied to it causing modulation in shade height. The control system can be designed to optimize numerous variables, the most common being control of direct sun. In this application, the shades were controlled to five preset heights that aligned with the architectural features of the façade - i.e., the vision portion of the window wall - so that direct sun penetrated no more than a specified distance from the window wall. The Times Company also requested that the shades control window glare, yet maximize the opportunity for view and daylight admission. Unnecessary up/down movement of the shade was to be minimized. Fabric choices (openness of the weave, color of the fabric facing toward the interior and exterior) were additional considerations in terms of appearance as well as visual comfort and daylighting benefits.

382

CRDIAC: Coupled Reactor Depletion Instrument with Automated Control  

SciTech Connect

When modeling the behavior of a nuclear reactor over time, it is important to understand how the isotopes in the reactor will change, or transmute, over that time. This is especially important in the reactor fuel itself. Many nuclear physics modeling codes model how particles interact in the system, but do not model this over time. Thus, another code is used in conjunction with the nuclear physics code to accomplish this. In our code, Monte Carlo N-Particle (MCNP) codes and the Multi Reactor Transmutation Analysis Utility (MRTAU) were chosen as the codes to use. In this way, MCNP would produce the reaction rates in the different isotopes present and MRTAU would use cross sections generated from these reaction rates to determine how the mass of each isotope is lost or gained. Between these two codes, the information must be altered and edited for use. For this, a Python 2.7 script was developed to aid the user in getting the information in the correct forms. This newly developed methodology was called the Coupled Reactor Depletion Instrument with Automated Controls (CRDIAC). As is the case in any newly developed methodology for modeling of physical phenomena, CRDIAC needed to be verified against similar methodology and validated against data taken from an experiment, in our case AFIP-3. AFIP-3 was a reduced enrichment plate type fuel tested in the ATR. We verified our methodology against the MCNP Coupled with ORIGEN2 (MCWO) method and validated our work against the Post Irradiation Examination (PIE) data. When compared to MCWO, the difference in concentration of U-235 throughout Cycle 144A was about 1%. When compared to the PIE data, the average bias for end of life U-235 concentration was about 2%. These results from CRDIAC therefore agree with the MCWO and PIE data, validating and verifying CRDIAC. CRDIAC provides an alternative to using ORIGEN-based methodology, which is useful because CRDIAC's depletion code, MRTAU, uses every available isotope in its depletion, unlike ORIGEN, which only depletes the isotopes specified by the user. This means that depletions done by MRTAU more accurately reflect reality. MRTAU also allows the user to build new isotope data sets, which means any isotope with nuclear data could be depleted, something that would help predict the outcomes of nuclear reaction testing in materials other than fuel, like beryllium or gold.

Steven K. Logan

2012-08-01T23:59:59.000Z

383

Analysis of Remote Diagnosis Architecture for a PLCBbased Automated Assembly System  

E-Print Network (OSTI)

To troubleshoot equipment installed in geographically distant locations, equipment manufacturers and system integrators are increasingly resorting to remote diagnosis in order to reduce the down time of the equipment, thereby achieving savings in cost and time on both the customer and manufacturer side. Remote diagnosis involves the use of communication technologies to perform fault diagnosis of a system located at a site distant to a troubleshooter. In order to achieve remote diagnosis, several frameworks have been proposed incorporating advancements such as automated fault diagnosis, collaborative diagnosis and mobile communication techniques. Standards exist for the capabilities representative of different levels of remote equipment diagnosis. Several studies have been performed to analyze the ability of human machine interface to assist troubleshooters in local fault diagnosis. However, the ability of a remote diagnosis system architecture to assist the troubleshooter in performing diagnosis and the effects of the failure types and other factors in a remote diagnosis environment on remote troubleshooting performance are not frequently addressed. In this thesis, an attempt is made to understand the factors that affect remote troubleshooting performance: remote diagnosis architecture, nature of failure, skill level of the local operator and level of expertise of the remote troubleshooter. For this purpose, three hierarchical levels of remote diagnosis architectures to diagnose failures in a PLC based automated assembly system were built based on existing standards. Common failures in automated assembly systems were identified and duplicated. Experiments were performed in which expert and novice troubleshooters used these remote diagnosis architectures to diagnose different types of failures while working with novice and engineer operators. The results suggest that in the diagnosis of failures related to measured or monitored system variables by remote expert troubleshooters, remote troubleshooting performance improved with the increase in the levels of the remote diagnosis architectures. In contrast, in the diagnosis of these failures by novice troubleshooters, no significant difference was observed among the three architectures in terms of remote troubleshooting performance and the novice troubleshooters experienced problems with managing the increased information available. Failures unrelated to monitored system parameters resulted in significantly reduced remote troubleshooting performance with all the three architectures in comparison to the failures related to monitored system parameters for both expert and novice troubleshooters. The experts exhibited better information gathering capabilities by spending more time per information source and making fewer transitions between information sources while diagnosing failures. The increase in capabilities of the architectures resulted in reduced operator interaction to a to a greater extent with experts. The difference in terms of overall remote troubleshooting performance between engineer and novice operators was not found to be significant.

Sekar, Ramnath

2010-08-01T23:59:59.000Z

384

Process development for automated solar cell and module production. Task 4. Automated array assembly. Annual report  

DOE Green Energy (OSTI)

MBA has been working on the automated array assembly task of the Low-Cost Solar Array project. A baseline sequence for the manufacture of solar cell modules is specified. Starting with silicon wafers, the process goes through damage etching, texture etching, junction formation, plasma edge etch, aluminum back surface field formation, and screen printed metallization to produce finished solar cells which are then series connected on a ribbon and bonded into a finished glass, PVB, tedlar module. A number of steps required additional developmental effort to verify technical and economic feasibility. These steps include texture etching, plasma edge etch, aluminum back surface field formation, array layup and interconnect, and module edge sealing and framing.

Witham, C.R.

1979-06-12T23:59:59.000Z

385

Market transformation lessons learned from an automated demand response test in the Summer and Fall of 2003  

E-Print Network (OSTI)

of Fully Automated Demand Response in Large FacilitiesLearned from an Automated Demand Response Test in the SummerLearned from an Automated Demand Response Test in the Summer

Shockman, Christine; Piette, Mary Ann; ten Hope, Laurie

2004-01-01T23:59:59.000Z

386

HEADLINE: DOE Pursues Automation in West Virginia Lab  

NLE Websites -- All DOE Office Websites (Extended Search)

HEADLINE: DOE Pursues Automation in West Virginia Lab HEADLINE: DOE Pursues Automation in West Virginia Lab By Elizabeth McGowan Hakan Inan can envision a day in the near future when electric utilities will be able to find and isolate faults, then restore service-in record time and without human intervention. His goal is to create a model for automating the process of locating a fault and reconfiguring the feeder. And in utility circles, it's considered very tricky because nobody has yet perfected the process, even though the hardware and software have become available during the last several years. Hakan Inan, is an electrical engineer for Science Applications International Corporation, providing support to the NETL Modern Grid Strategy Program through Research and Development Solutions, LLC, is experimenting with this technology in Morgantown, W.V.,

387

Automation and security of Supply (Smart Grid Project) | Open Energy  

Open Energy Info (EERE)

Automation and security of Supply (Smart Grid Project) Automation and security of Supply (Smart Grid Project) Jump to: navigation, search Project Name Automation and security of Supply Country Denmark Coordinates 56.26392°, 9.501785° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":56.26392,"lon":9.501785,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

388

Automated Demand Response Strategies and Commissioning CommercialBuilding Controls  

SciTech Connect

California electric utilities have been exploring the use of dynamic critical peak pricing (CPP) and other demand response programs to help reduce peaks in customer electric loads. CPP is a new electricity tariff design to promote demand response. This paper begins with a brief review of terminology regarding energy management and demand response, followed by a discussion of DR control strategies and a preliminary overview of a forthcoming guide on DR strategies. The final section discusses experience to date with these strategies, followed by a discussion of the peak electric demand savings from the 2005 Automated CPP program. An important concept identified in the automated DR field tests is that automated DR will be most successful if the building commissioning industry improves the operational effectiveness of building controls. Critical peak pricing and even real time pricing are important trends in electricity pricing that will require new functional tests for building commissioning.

Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila; Linkugel, Eric

2006-05-01T23:59:59.000Z

389

Automated Demand Response Technologies and Demonstration in New York City  

NLE Websites -- All DOE Office Websites (Extended Search)

Technologies and Demonstration in New York City Technologies and Demonstration in New York City using OpenADR Title Automated Demand Response Technologies and Demonstration in New York City using OpenADR Publication Type Report LBNL Report Number LBNL-6470E Year of Publication 2013 Authors Kim, Joyce Jihyun, Sila Kiliccote, and Rongxin Yin Date Published 09/2013 Publisher LBNL/NYSERDA Abstract Demand response (DR) - allowing customers to respond to reliability requests and market prices by changing electricity use from their normal consumption pattern - continues to be seen as an attractive means of demand-side management and a fundamental smart-grid improvement that links supply and demand. Since October 2011, the Demand Response Research Center at Lawrence Berkeley National Laboratory and New York State Energy Research and Development Authority have conducted a demonstration project enabling Automated Demand Response (Auto-DR) in large commercial buildings located in New York City using Open Automated Demand Response (OpenADR) communication protocols. In particular, this project focuses on demonstrating how OpenADR can automate and simplify interactions between buildings and various stakeholders in New York State including the independent system operator, utilities, retail energy providers, and curtailment service providers. In this paper, we present methods to automate control strategies via building management systems to provide event-driven demand response, price response and demand management based on OpenADR signals. We also present cost control opportunities under day-ahead hourly pricing for large customers and Auto-DR control strategies developed for demonstration buildings. Lastly, we discuss the communication architecture and Auto-DR system designed for the demonstration project to automate price response and DR participation.

390

Proteomics Data Interoperation with Applications to Integrated Data mining and Enhanced Information Retrieval  

E-Print Network (OSTI)

Information Retrieval Andrew Kendall Smith 2006 This thesis addresses the problem of data integration-database queries in support of scientific exploratory data analysis and enhanced information retrieval. Semantic ranking in support of enhanced automated information retrieval of web or biomedical scientific literature

Gerstein, Mark

391

Incorporation of corpus-specific semantic information into question answering context  

Science Conference Proceedings (OSTI)

In today's environment of information overload, Question Answering (QA) is a critically important research area for the Semantic Web. In order for humans to make effective use of the expansive information sources available to us, we require automated ... Keywords: information retrieval, language modeling, question answering, statistical language modeling

Protima Banerjee; Hyoil Han

2008-10-01T23:59:59.000Z

392

Computer-automated controls for superconducting magnetic energy storage  

DOE Green Energy (OSTI)

A computer-automated control system that allows unmanned operation of the Superconducting Magnetic Energy Storage (SMES) system has been designed and almost completely installed at Los Alamos National Laboratory. In addition to unmanned operation, the computer offers continual monitoring and recording of all the important SMES signals, operator guidance in starting up and maintaining SMES, emergency shutdown control, and high-speed data acquisition for failure diagnosis. The major components of the computer-automated control system are two slave computers that perform the data acquisition and a master computer that performs the control.

Criscuolo, A.L.

1981-01-01T23:59:59.000Z

393

Rockwell Automation & General Mills Teaming Profile | ENERGY STAR Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Rockwell Automation & General Mills Teaming Profile Rockwell Automation & General Mills Teaming Profile Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

394

A Key-Distribution Scheme for Wireless Home Automation Networks  

E-Print Network (OSTI)

Wireless home automation networks are one example of how wireless technologies may soon become part of our daily life, yet security in existing products is woefully inadequate. An important problem in this area is the question of secure key distribution. In this paper we present a key-distribution scheme geared towards home automation networks, but applicable to other networks with related properties as well. Our approach uses a decentralized scheme that is designed to work on resource-poor devices, allows easy addition and removal of devices and limits the workload on the end user while guaranteeing the secrecy of the exchanged keys even in the presence of subverted nodes.

Arno Wacker; Timo Heiber; Holger Cermann

2004-01-01T23:59:59.000Z

395

Automated energy model creation for conceptual design  

Science Conference Proceedings (OSTI)

Architects today rarely use whole building energy analysis to inform their early design process. During this stage of design, the team is responsible for macro-level decisions (such as basic form and orientation) that can have the most significant effects ... Keywords: building performance simulation, design process, whole building energy analysis

Lillian Smith; Kyle Bernhardt; Matthew Jezyk

2011-04-01T23:59:59.000Z

396

Automated user modeling for personalized digital libraries  

Science Conference Proceedings (OSTI)

Digital libraries (DLs) have become one of the most typical ways of accessing any kind of digitalized information. Due to this key role, users welcome any improvements on the services they receive from DLs. One trend used to improve digital services ... Keywords: Adaptive library services, Digital libraries, Personalization, User modeling

E. Frias-Martinez; G. Magoulas; S. Chen; R. Macredie

2006-06-01T23:59:59.000Z

397

Use Energy Information Services to Benchmark with ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Information Services to Energy Information Services to Benchmark with ENERGY STAR ® Tracking Building Energy Performance Tracking a building's energy performance provides a building owner or manager with critical knowledge to make improvements to the building's operations and reduce energy consumption. Energy information services offer a variety of ways to help companies obtain and organize this valuable energy information. Energy information service providers that have partnered with ENERGY STAR offer an additional tool to assess the energy performance of buildings: automated benchmarking. ENERGY STAR is the national symbol for saving the environment through energy efficiency, recognized by more than 65 percent of the American public. Automated benchmarking allows energy information service providers to provide their customers with ENERGY STAR

398

An Automated System for the Analysis of Gravity Waves and Other Mesoscale Phenomena  

Science Conference Proceedings (OSTI)

An automated near-real-time system for the surface analysis of gravity waves and other mesoscale phenomena is developed, tested, and applied to several cases. Five-minute observations from the Automated Surface Observing System (ASOS) network ...

Steven E. Koch; Stephen Saleeby

2001-12-01T23:59:59.000Z

399

Automation of a hydroelectric power station using variable-structure control systems  

Science Conference Proceedings (OSTI)

This article presents the basis and conception of, and some experimental results obtained from, the automation of a hydroelectric power station. The principle of this automation, the purpose of which was to maximize the active power supplied by the station, ...

J. Erschler; F. Roubellat; J. P. Vernhes

1974-01-01T23:59:59.000Z

400

Development and Evaluation of an Automated Annotation Pipeline and cDNA Annotation System  

E-Print Network (OSTI)

Development and Evaluation of an Automated Annotation Pipeline and cDNA Annotation System Takeya, including an automated annotation pipeline that provides high-quality preliminary annotation for each

Gough, Julian

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Using Jini to Integrate Home Automation in a Distributed Software-System  

Science Conference Proceedings (OSTI)

The last few years, a tendency arose to integrate various programmable devices through ever expanding computer networks. One particular domain in which this evolution stood out clearly is home automation. The EIB standard defines a home automation solution ...

Peter Rigole; Tom Holvoet; Yolande Berbers

2002-04-01T23:59:59.000Z

402

Design and Performance Analysis of an Automated 10-Channel Solar Radiometer Instrument  

Science Conference Proceedings (OSTI)

An automated multichannel solar radiometer has been designed and fabricated by the Atmospheric Remote Sensing Laboratory at The University of Arizona. The automated radiometer has 10 separate silicon-photodiode-based channels that allow near-...

A. R. Ehsani; J. A. Reagan; W. H. Erxleben

1998-06-01T23:59:59.000Z

403

Automated ground maintenance and health management for autonomous unmanned aerial vehicles  

E-Print Network (OSTI)

Automated ground maintenance is a necessity for multi-UAV systems. Without such automation, these systems will become more of a burden than a benefit as human operators struggle to contend with maintenance operations for ...

Dale, Daniel R., M. Eng. Massachusetts Institute of Technology

2007-01-01T23:59:59.000Z

404

Automated scoring for creative problem-solving ability with ideation-explanation modeling  

E-Print Network (OSTI)

Abstract. This paper describes an automated scorer for assessing students Creative Problem-Solving (CPS) abilities via modeling the intra-structure of students essays describing their thoughts on solving particular problems. The automated scorer aims

Hao-chuan Wang; Chun-yen Chang; Tsai-yen Li

2005-01-01T23:59:59.000Z

405

Design of an automated sorting and orienting machine for electronic pins  

E-Print Network (OSTI)

At the power electronics manufacturer SynQor, the printed circuit board (PCB) assembly line is fully automated with the exception of the step which inserts electronic pins into the PCBs. Past attempts to automate this ...

Chang, Michelle Sueway

2012-01-01T23:59:59.000Z

406

ETM (Distribution Network Automation on 10 kV cable line stations...  

Open Energy Info (EERE)

ETM (Distribution Network Automation on 10 kV cable line stations) (Smart Grid Project) Jump to: navigation, search Project Name ETM (Distribution Network Automation on 10 kV cable...

407

Development testing of the chemical analysis automation polychlorinated biphenyl standard analysis method during surface soils sampling at the David Witherspoon 1630 site  

SciTech Connect

The Chemical Analysis Automation (CAA) project is developing standardized, software-driven, site-deployable robotic laboratory systems with the objective of lowering the per-sample analysis cost, decreasing sample turnaround time, and minimizing human exposure to hazardous and radioactive materials associated with DOE remediation projects. The first integrated system developed by the CAA project is designed to determine polychlorinated biphenyls (PCB) content in soil matrices. A demonstration and development testing of this system was conducted in conjuction with surface soil characterization activities at the David Witherspoon 1630 Site in Knoxville, Tennessee. The PCB system consists of five hardware standard laboratory modules (SLMs), one software SLM, the task sequence controller (TSC), and the human-computer interface (HCI). Four of the hardware SLMs included a four-channel Soxhlet extractor, a high-volume concentrator, a column cleanup, and a gas chromatograph. These SLMs performed the sample preparation and measurement steps within the total analysis protocol. The fifth hardware module was a robot that transports samples between the SLMs and the required consumable supplies to the SLMs. The software SLM is an automated data interpretation module that receives raw data from the gas chromatograph SLM and analyzes the data to yield the analyte information. The TSC is a software system that provides the scheduling, management of system resources, and the coordination of all SLM activities. The HCI is a graphical user interface that presents the automated laboratory to the analyst in terms of the analytical procedures and methods. Human control of the automated laboratory is accomplished via the HCI. Sample information required for processing by the automated laboratory is entered through the HCI. Information related to the sample and the system status is presented to the analyst via graphical icons.

Hunt, M.A.; Klatt, L.N.; Thompson, D.H. [and others

1998-02-01T23:59:59.000Z

408

Demand Response and Open Automated Demand Response Opportunities for Data Centers  

SciTech Connect

This study examines data center characteristics, loads, control systems, and technologies to identify demand response (DR) and automated DR (Open Auto-DR) opportunities and challenges. The study was performed in collaboration with technology experts, industrial partners, and data center facility managers and existing research on commercial and industrial DR was collected and analyzed. The results suggest that data centers, with significant and rapidly growing energy use, have significant DR potential. Because data centers are highly automated, they are excellent candidates for Open Auto-DR. 'Non-mission-critical' data centers are the most likely candidates for early adoption of DR. Data center site infrastructure DR strategies have been well studied for other commercial buildings; however, DR strategies for information technology (IT) infrastructure have not been studied extensively. The largest opportunity for DR or load reduction in data centers is in the use of virtualization to reduce IT equipment energy use, which correspondingly reduces facility cooling loads. DR strategies could also be deployed for data center lighting, and heating, ventilation, and air conditioning. Additional studies and demonstrations are needed to quantify benefits to data centers of participating in DR and to address concerns about DR's possible impact on data center performance or quality of service and equipment life span.

Ghatikar, Girish; Piette, Mary Ann; Fujita, Sydny; McKane, Aimee; Dudley, Junqiao Han; Radspieler, Anthony; Mares, K.C.; Shroyer, Dave

2009-12-30T23:59:59.000Z

409

Functions and Requirements and Specifications for Replacement of the Computer Automated Surveillance System (CASS)  

SciTech Connect

Functional requirements and specifications document for system to replace tank farm computer automated waste tank surveillance system.

DOUKA, K.C.

2000-05-05T23:59:59.000Z

410

Automated forensic fingerprint analysis: a novel generic process model and container format  

Science Conference Proceedings (OSTI)

The automated forensic analysis of latent fingerprints poses a new challenge. While for the pattern recognition aspects involved, the required processing steps can be related to fingerprint biometrics, the common biometric model needs to be extended ... Keywords: automated dactyloscopy, automated forensic analysis, forensic container format, multibranched biometric process

Tobias Kiertscher; Claus Vielhauer; Marcus Leich

2011-03-01T23:59:59.000Z

411

Abstract -The paper discusses automated substation data integration and analysis. Recorded data collected  

E-Print Network (OSTI)

Control and Data Acquisition (SCADA) and Energy Management System (EMS) applications of substation environment of substation automation project. It provides data to a number of application including automated1 Abstract--With the deregulation and restructuring of utility industry, many substation automation

Kezunovic, Mladen

412

Abstract--With the deregulation and restructuring of utility industry, many substation automation applications are being  

E-Print Network (OSTI)

Control and Data Acquisition (SCADA) and Energy Management System (EMS) applications of substation environment of substation automation project. It provides data to a number of application including automated1 Abstract--With the deregulation and restructuring of utility industry, many substation automation

413

Making technology homey: finding sources of satisfaction and meaning in home automation  

Science Conference Proceedings (OSTI)

Home and automation are not natural partners--one homey and the other cold. Most current automation in the home is packaged in the form of appliances. To better understand the current reality and possible future of living with other types of domestic ... Keywords: home automation, need finding

Leila Takayama; Caroline Pantofaru; David Robson; Bianca Soto; Michael Barry

2012-09-01T23:59:59.000Z

414

On cost-effectiveness of human-centered and socially acceptable robot and automation systems  

Science Conference Proceedings (OSTI)

This paper considers human-centered and socially appropriate robots as well as automation systems within the context of their cost-effectiveness. Usually, the objection of system designers is that approaches for human-centered and socio-technical design ... Keywords: Cost-effective automation, Human factors, Human-centered systems, Robots, Socially appropriate automation, Socio-technical systems

Janko Cernetic

2003-06-01T23:59:59.000Z

415

Communications Infrastructure for Distribution Applications and Automation  

Science Conference Proceedings (OSTI)

The purpose of this report is to determine the role that communications will play in the distribution system of the future and to define the research, development, and demonstration (RD&D) activities required to enable the communications infrastructure needed to support the future vision. The communications infrastructure needed to support the distribution system of the future must support scalability, flexibility, and interoperability for data and information exchange using standards across the entire g...

2011-12-20T23:59:59.000Z

416

Automated safety and training avionics for general aviation aircraft  

E-Print Network (OSTI)

The past decade has seen the U.S. general aviation community plagued by substantial cost increases while operating in an increasingly complex and crowded air traffic control structure. Unfortunately, there has been a corresponding rise in accident rates involving these aircraft. In an attempt to improve safety factors and training programs for this aviation sector, researchers at Texas A&M University are investigating "smart cockpit systems." This research program is titled Automated Safety and Training Avionics (ASTRA). ASTRA research is focused on integrating low-cost, yet sophisticated, computing technology into general aviation aircraft. The system architecture includes a Flight Mode Interpreter (FMI), which provides real-time identification of the aircraft operational maneuvering mode, through interpretation by fuzzy logic of aircraft state variables. This inference controls a Head-Up Display (HUD) to automatically present a unique display format appropriate to the operational situation. The FMI also drives a rule-based Pilot Advisor for generation of alarms and piloting advice. The pilot communicates with ASTRA through the Head-Down Display (HDD), which is configured similarly to the Multi-Function Displays found in many "glass cockpit" aircraft. This configuration permits the pilot to readily access, edit, and display a wide variety of information. The research reported in this thesis was to formally define the performance and test specifications for ASTRA and its various subsystems, as well as to design the system displays. Performance of these research tasks drew heavily on the author's experience as an Army experimental test pilot. Because the FMI is a unique development in modem aeronautics, definition of its functionality and integration with other system components could not rely on existing methodology and called for a imaginative approach. Likewise, design of the HUD and HDD display formats, as integrated with the FMI, was equally challenging. It is hoped that the research contributions of this thesis will form a firm foundation for the implementation and evaluation of the ASTRA system. It is felt that the success of the system will hinge on its functionality and perceived utility from the perspective of the general aviation pilot.

Trang, Jeffrey Alan

1997-01-01T23:59:59.000Z

417

Inform Editors  

Science Conference Proceedings (OSTI)

Inform editorial board Inform Editors inform Magazine algae algal AOCS biomass business chemistry cottonseed date detergents fats filing first history inform inform Magazine international inventor law magazine member members monthly news oil oils

418

Subscription Information  

Science Conference Proceedings (OSTI)

Inform subscription rates. Subscription Information inform Magazine algae algal AOCS biomass business chemistry cottonseed date detergents fats filing first history inform inform Magazine international inventor law magazine member members monthly

419

Automating the Selection of Fenestration Systems to Best Meet Daylighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Automating the Selection of Fenestration Systems to Best Meet Daylighting Automating the Selection of Fenestration Systems to Best Meet Daylighting Performance Goals Title Automating the Selection of Fenestration Systems to Best Meet Daylighting Performance Goals Publication Type Conference Paper LBNL Report Number LBNL-53003 Year of Publication 2003 Authors Fernandes, Luis L., and Konstantinos M. Papamichael Conference Name 2003 International Building Performance Simulation Association Conference Date Published 02/2003 Conference Location Eindhoven, Netherlands Call Number LBNL-53003 Abstract Traditional selection of fenestration systems follows a trial-and-error approach, i.e., iterative selection of fenestration systems and evaluation of their performance through the use of simulation tools and techniques. This paper is about the development of a new method, which inverts traditional practice, i.e., aims at automated selection of fenestration systems that best meet specific lighting performance goals. The new method is based on manipulation of matrices that represent the optical properties of fenestration systems, the propagation of light in interior spaces, and the outdoors luminous conditions. The method follows two steps: 1) the determination of the luminous flux distribution originating from the location of the fenestration that best meets the desired lighting performance goals and 2) the selection of the fenestration system that comes closer to producing the desired flux distribution from the outdoor daylight distribution.

420

Evidence algorithm and system for automated deduction: a retrospective view  

Science Conference Proceedings (OSTI)

A research project aimed at the development of an automated theorem proving system was started in Kiev (Ukraine) in early 1960s. The mastermind of the project, Academician V. Glushkov, baptized it "Evidence Algorithm", EA1. The work on the project lasted, ...

Alexander Lyaletski; Konstantin Verchinine

2010-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

The function of semantics in automated language processing  

Science Conference Proceedings (OSTI)

This paper is a survey of some of the major semantic models that have been developed for automated semantic analysis of natural language. Current approaches to semantic analysis and logical inference are based mainly on models of human cognitive processes ... Keywords: computational linguistics, grammars, natural language processing, semantics

Milos Pacak; Arnold W. Pratt

1971-04-01T23:59:59.000Z

422

Automated Source-Level Error Localization in Hardware Designs  

Science Conference Proceedings (OSTI)

Recent achievements in formal verification techniques allow for fault detection even in large real-world designs. Tool support for localizing the faulty statements is critical, because it reduces development time and overall project costs. Automated ... Keywords: design error diagnosis, software debugging, model-based diagnosis, fault localization

Bernhard Peischl; Franz Wotawa

2006-01-01T23:59:59.000Z

423

Automated Temperature and Relative Humidity Calibrations for the Oklahoma Mesonetwork  

Science Conference Proceedings (OSTI)

A low-cost (under $12,000), fully automated, relative humidity calibration chamber capable of testing up to six probes simultaneously over a range of humidifies from 5% to approximately 95% is designed, constructed, and tested for use by the ...

Scott J. Richardson

1995-08-01T23:59:59.000Z

424

Opportunities for Automated Demand Response in Wastewater Treatment  

NLE Websites -- All DOE Office Websites (Extended Search)

Opportunities for Automated Demand Response in Wastewater Treatment Opportunities for Automated Demand Response in Wastewater Treatment Facilities in California - Southeast Water Pollution Control Plant Case Study Title Opportunities for Automated Demand Response in Wastewater Treatment Facilities in California - Southeast Water Pollution Control Plant Case Study Publication Type Report LBNL Report Number LBNL-6056E Year of Publication 2012 Authors Olsen, Daniel, Sasank Goli, David Faulkner, and Aimee T. McKane Date Published 12/2012 Publisher CEC/LBNL Keywords market sectors, technologies Abstract This report details a study into the demand response potential of a large wastewater treatment facility in San Francisco. Previous research had identified wastewater treatment facilities as good candidates for demand response and automated demand response, and this study was conducted to investigate facility attributes that are conducive to demand response or which hinder its implementation. One years' worth of operational data were collected from the facility's control system, submetered process equipment, utility electricity demand records, and governmental weather stations. These data were analyzed to determine factors which affected facility power demand and demand response capabilities.

425

Automating the mutation testing of aspect-oriented Java programs  

Science Conference Proceedings (OSTI)

Aspect-Oriented Programming has introduced new types of software faults that may be systematically tackled with mutation testing. However, such testing approach requires adequate tooling support in order to be properly performed. This paper addresses ... Keywords: aspect-oriented programming, mutation testing, test automation, testing tools

Fabiano Cutigi Ferrari; Elisa Yumi Nakagawa; Awais Rashid; Jos Carlos Maldonado

2010-05-01T23:59:59.000Z

426

An efficient electronic archiving approach for office automation  

Science Conference Proceedings (OSTI)

Recentlly, electronic archives are becoming very important for office automation. Minimizing the size of the stored data in electronic archive is a main issue to reduce the phyzical storage area. In this paper, the effect of different types of Arabic ... Keywords: cross correlation, electronic archiving, fast word detection, frequency domain

Hazem M. El-Bakry; Nikos Mastorakis

2009-06-01T23:59:59.000Z

427

A simulation tool for automated platooning in mixed highway scenarios  

Science Conference Proceedings (OSTI)

Automated platooning is one of the most challenging fields in the domain of ITS. Conceptually, platooning means creating clusters of vehicles which closely follow each other autonomously without action of the driver, neither for accelerating, nor for ... Keywords: cooperative adaptive cruise control, platooning, simulation, vehicular networks

Michele Segata; Falko Dressler; Renato Lo Cigno; Mario Gerla

2012-08-01T23:59:59.000Z

428

Automated composition of Web services via planning in asynchronous domains  

Science Conference Proceedings (OSTI)

The service-oriented paradigm promises a novel degree of interoperability between business processes, and is leading to a major shift in way distributed applications are designed and realized. While novel and more powerful services can be obtained, in ... Keywords: Automated program synthesis, Planning, Web services

Piergiorgio Bertoli; Marco Pistore; Paolo Traverso

2010-03-01T23:59:59.000Z

429

The ironies of automation: still going strong at 30?  

Science Conference Proceedings (OSTI)

Motivation -- Bainbridge highlighted some of the ironies of automation 30 years ago and identified possible solutions. Society is now highly dependent on complex technological systems, so we assess our performance in addressing the ironies in ... Keywords: ergonomics, human factors, resilience, systems engineering

Gordon Baxter; John Rooksby; Yuanzhi Wang; Ali Khajeh-Hosseini

2012-08-01T23:59:59.000Z

430

An extensive study on automated Dewey Decimal Classification  

Science Conference Proceedings (OSTI)

In this paper, we present a theoretical analysis and extensive experiments on the automated assignment of Dewey Decimal Classification (DDC) classes to bibliographic data with a supervised machine-learning approach. Library classification systems, such ... Keywords: Dewey Decimal Classification, automatic classification, hierarchical classification, hierarchical models, tree structures

Jun Wang

2009-11-01T23:59:59.000Z

431

Automated Analysis Using IED-Recorded Data: Implementation and Integration  

E-Print Network (OSTI)

-recorded substation data in an automatic way. It focuses on adding new automated functions built on the top of the substation IED database. There are several types of modern IEDs used in today's substations. Different file of integrating IED data collected by different IED types and then focuses on how to use the integrated substation

Kezunovic, Mladen

432

Design and Construction of an Automated Community Bicycle Loan/  

E-Print Network (OSTI)

$20 Box $50 Solar Power Panels $50 CPU $200 Total Per Unit $432 #12;Conclusion and Future · Lessons design and construct an automated community bike share system in-house in a cost efficient manner/Closed? #12;The Circuit · Parallel Port · 1 bit input · 1 bit output · 12 V and 5 V power #12;The RFID Antenna

Goadrich, Mark

433

Improved Empty Vehicle Balancing in Automated Material Handling Systems  

Science Conference Proceedings (OSTI)

The use of automated guided vehicles in high-tech industries such as the semiconductor industry results, due to the size of such factories, in highly complex rail-networks. In contrast to the routing of vehicles that are transporting a lot to its destination, ... Keywords: Vehicle Balancing, AMHS, Semiconductor, Simulation

Roland Wertz; Christian Fischmann; Fabian Bttinger; Martin Kasperczyk

2008-04-01T23:59:59.000Z

434

An automated system for search and retrieval of trademarks  

Science Conference Proceedings (OSTI)

The number of trademarks is growing rapidly, which makes searching among a large database of trademarks very difficult. The aim has been to develop an automated system to facilitate searching, comparing and retrieving trademarks. In this paper, such ... Keywords: annotation, content-based image retrieval (CBIR), text-based image retrieval (TBIR), trademark

Faezeh Karamzadeh; Mohammad Abdollahi Azgomi

2009-08-01T23:59:59.000Z

435

Automated troubleshooting of a UMTS-WLAN test platform  

Science Conference Proceedings (OSTI)

Amongst troubleshooting tasks, correct diagnosis of faults is a complex and time consuming task. Bayesian Networks provide a modelling approach suitable to cater for the uncertainty inherent in human reasoning. The method presented in this paper, valid ... Keywords: analysis, automated troubleshooting, test platform

Ronan Skehill; Sean McGrath; Carlos Antonio de Ramos

2008-03-01T23:59:59.000Z

436

Making an automated monitoring system work at Tolt Dam  

SciTech Connect

A major upgrade of the dam safety program at Tolt Dam in Seattle, Washington is described. The upgrade was prompted by the age (30 years) of the dam, the addition of a hydroelectric plant, and public concern. The program is based on an automated condition monitoring and advance warning system. The design, implementation, and operating experience of the system are described.

Marilley, J.M. [Seattle Water Dept., WA (United States); Myers, B.K. [Woodward-Clyde Consultants, Seattle, WA (United States)

1996-10-01T23:59:59.000Z

437

ARES: automated response function code. Users manual. [HPGAM and LSQVM  

SciTech Connect

This ARES user's manual provides detailed instructions for a general understanding of the Automated Response Function Code and gives step by step instructions for using the complete code package on a HP-1000 system. This code is designed to calculate response functions of NaI gamma-ray detectors, with cylindrical or rectangular geometries.

Maung, T.; Reynolds, G.M.

1981-06-01T23:59:59.000Z

438

Automated Energy Distribution and Reliability System (AEDR): Final Report  

Science Conference Proceedings (OSTI)

This report describes Northern Indiana Public Service Co. project efforts to develop an automated energy distribution and reliability system. The purpose of this project was to implement a database-driven GIS solution that would manage all of the company's gas, electric, and landbase objects.

Buche, D. L.

2008-07-01T23:59:59.000Z

439

Automated Energy Distribution and Reliability System Status Report  

Science Conference Proceedings (OSTI)

This report describes Northern Indiana Public Service Co. project efforts to develop an automated energy distribution and reliability system. The purpose of this project was to implement a database-driven GIS solution that would manage all of the company's gas, electric, and landbase objects.

Buche, D. L.; Perry, S.

2007-10-01T23:59:59.000Z

440

Proceedings of the 49th Annual Design Automation Conference  

Science Conference Proceedings (OSTI)

It is a great pleasure to welcome you to the 49th annual edition of the Design Automation Conference, appropriately held in beautiful San Francisco. Since 1964, which is even before the beginning of Moore's law, DAC is the place where electronic systems ...

Patrick Groeneveld; Donatella Sciuto; Soha Hassoun

2012-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Automation Schemes for FPGA Implementation of Wave-Pipelined Circuits  

Science Conference Proceedings (OSTI)

Operating frequencies of combinational logic circuits can be increased using Wave-Pipelining (WP), by adjusting the clock periods and clock skews. In this article, Built-In Self-Test (BIST) and System-on-Chip (SOC) approaches are proposed for automating ... Keywords: CORDIC, DAA, FPGA, SOC, pipelining, wave-pipelining

G. Seetharaman; B. Venkataramani

2009-06-01T23:59:59.000Z

442

Automation of port facilities for import of GNL  

Science Conference Proceedings (OSTI)

This article examines the implementation of port terminals intended for the import of liquified natural gas in Brazilian territory and its importance to assure the continuity of energy offer, which historically has been one of the main factors limiting ... Keywords: GNL, automation, power resources, regaseification, terminal

Andr Seichi Ribeiro Kuramoto; Nilson Magalhes Bueno; Walter Da Silva Frazo Filho; Eduardo Mario Dias; Caio Fernando Fontana

2009-07-01T23:59:59.000Z

443

Detecting and Forecasting Economic Regimes in Automated Exchanges  

E-Print Network (OSTI)

Detecting and Forecasting Economic Regimes in Automated Exchanges Wolfgang Ketter # , John Collins tactical decisions such as pricing and strategic decisions such as product mix and production planning. We historical data using computational methods to construct price density functions. We discuss how

Ketter, Wolfgang

444

A Case Study in Automated Feeder Switching Map Creation  

Science Conference Proceedings (OSTI)

This project's objective was to autogenerate a set of custom paper maps of distribution systems to improve switching, reliability, and customer service. The paper maps were designed as a stop-gap measure to help operators until a long-term solution with a more automated interface that can display recloser and switch loops is developed.

2009-06-30T23:59:59.000Z

445

NIF ICCS Test Controller for Automated & Manual Testing  

SciTech Connect

The National Ignition Facility (NIF) Integrated Computer Control System (ICCS) is a large (1.5 MSLOC), hierarchical, distributed system that controls all aspects of the NIF laser [1]. The ICCS team delivers software updates to the NIF facility throughout the year to support shot operations and commissioning activities. In 2006, there were 48 releases of ICCS: 29 full releases, 19 patches. To ensure the quality of each delivery, thousands of manual and automated tests are performed using the ICCS Test Controller test infrastructure. The TestController system provides test inventory management, test planning, automated test execution and manual test logging, release testing summaries and test results search, all through a web browser interface. Automated tests include command line based frameworks server tests and Graphical User Interface (GUI) based Java tests. Manual tests are presented as a checklist-style web form to be completed by the tester. The results of all tests, automated and manual, are kept in a common repository that provides data to dynamic status reports. As part of the 3-stage ICCS release testing strategy, the TestController system helps plan, evaluate and track the readiness of each release to the NIF facility.

Zielinski, J S

2007-10-03T23:59:59.000Z

446

Assessing the reliability of an automated dose-rounding algorithm  

Science Conference Proceedings (OSTI)

Objective: Pediatric dose rounding is a unique and complex process whose complexity is rarely supported by e-prescribing systems, though amenable to automation and deployment from a central service provider. The goal of this project was to validate an ... Keywords: Biomedical informatics, Clinical practice, Computer software, Electronic prescribing, Medical informatics, Prescriptions

Kevin B. Johnson, Yun-Xian Ho, S. Andrew Spooner, Marvin Palmer, Stuart T. Weinberg

2013-10-01T23:59:59.000Z

447

A comparison of automation techniques for optimization of compressor scheduling  

Science Conference Proceedings (OSTI)

Compressor selection is one of the primary functions in operation of natural gas pipelines, and a major concern of the task is to minimize operating costs. This study presents a comparison of three automation techniques for compressor selection: mixed ... Keywords: Compressor selection optimization, Expert system, Genetic algorithms, Mixed integer linear programming

H. H. Nguyen; V. Uraikul; C. W. Chan; P. Tontiwachwuthikul

2008-03-01T23:59:59.000Z

448

Building the case for automated building energy management  

Science Conference Proceedings (OSTI)

Energy consumption in buildings comprises a significant fraction of total worldwide energy consumption and is strongly influenced by occupant behavior. To explore the quantitative effect of particular occupant actions on building energy consumption, ... Keywords: building automation, energy saving behaviors, in-home display

Alan Marchiori; Qi Han; William C. Navidi; Lieko Earle

2012-11-01T23:59:59.000Z

449

PERSPECTIVE Automated protein structure calculation from NMR data  

E-Print Network (OSTI)

PERSPECTIVE Automated protein structure calculation from NMR data Mike P. Williamson ? C. Jeremy completely automatic structure determination of small pro- teins of\\15 kDa, from NMR spectra to structure, particu- larly by structural genomics consortia. Keywords NMR structure calculation of proteins Á

Craven, Jeremy

450

Automated segmentation of tissue images for computerized IHC analysis  

Science Conference Proceedings (OSTI)

This paper presents two automated methods for the segmentation of immunohistochemical tissue images that overcome the limitations of the manual approach as well as of the existing computerized techniques. The first independent method, based on unsupervised ... Keywords: Image processing, Immunohistochemistry, Nuclear segmentation, Tissue images, Tissue segmentation

S. Di Cataldo; E. Ficarra; A. Acquaviva; E. Macii

2010-10-01T23:59:59.000Z

451

Fundamentals of SCADA and automated meter reading  

SciTech Connect

This paper discusses SCADA systems allow users to control and acquire data from remote facilities such as compressors, pressure-regulating stations, control valves and measurement stations. In general, a SCADA system performs functions in sequential control, continuous control, supervisory setpoint control and data acquisitions. AMR systems allow users to obtain up-to-date information on their gas demand. When AMR was in its infancy, equipment was designed only to read and record gas consumption values. The basic function of an early AMR system was to read gas volume at a fixed interval and record the data in its memory until it communicated with a central receiving facility.

Kwok, A. (Data Acquisition, BC Gas Inc., Burnaby, British Columbia (CA))

1992-02-01T23:59:59.000Z

452

Identification and validation of cognitive design principles for automated generation of assembly instructions  

E-Print Network (OSTI)

Designing effective instructions for everyday products is challenging. One reason is that designers lack a set of design principles for producing visually comprehensible and accessible instructions. We describe an approach for identifying such design principles through experiments investigating the production, preference, and comprehension of assembly instructions for furniture. We instantiate these principles into an algorithm that automatically generates assembly instructions. Finally, we perform a user study comparing our computergenerated instructions to factory-provided and highly rated hand-designed instructions. Our results indicate that the computer-generated instructions informed by our cognitive design principles significantly reduce assembly time an average of 35 % and error by 50%. Details of the experimental methodology and the implementation of the automated system are described.

Julie Heiser; Doantam Phan; Maneesh Agrawala; Barbara Tversky; Pat Hanrahan

2004-01-01T23:59:59.000Z

453

Automated method and system for the alignment and correlation of images from two different modalities  

DOE Patents (OSTI)

A method and system for the computerized registration of radionuclide images with radiographic images, including generating image data from radiographic and radionuclide images of the thorax. Techniques include contouring the lung regions in each type of chest image, scaling and registration of the contours based on location of lung apices, and superimposition after appropriate shifting of the images. Specific applications are given for the automated registration of radionuclide lungs scans with chest radiographs. The method in the example given yields a system that spatially registers and correlates digitized chest radiographs with V/Q scans in order to correlate V/Q functional information with the greater structural detail of chest radiographs. Final output could be the computer-determined contours from each type of image superimposed on any of the original images, or superimposition of the radionuclide image data, which contains high activity, onto the radiographic chest image.

Giger, Maryellen L. (Elmhurst, IL); Chen, Chin-Tu (Lisle, IL); Armato, Samuel (Chicago, IL); Doi, Kunio (Willowbrook, IL)

1999-10-26T23:59:59.000Z

454

Inform App  

Science Conference Proceedings (OSTI)

Access INFORM anytime with our free app available on iPad, iPhone, Android and Kindle. Inform App Inform App

455

Automated resolution of semantic heterogeneity in multidatabases  

Science Conference Proceedings (OSTI)

A multidatabase system provides intergrated access to heterogeneous, autonomous local databases in a distributed system. An important problem in current multidatabase systems is identification of semantically similar data in different local databases. The Summary Schemas Model (SSM) is proposed as an extension to multidatabase systems to aid in semantic identification. The SSM uses a global data structure to abstract the information available in a multidatabase system. This abstracted form allows users to use their own terms. The system uses the global data structure to match the user`s terms to the semantically closest available system terms. A simulation of the SSM is presented to compare imprecise-query processing with corresponding query-processing costs in a standard multidatabase system. The costs and benefits of the SSM are discussed, and future research directions are presented. 57 refs., 15 figs.

Bright, M.W. [IBM Federal Systems Company, Gaithersburg, MD (United States); Hurson, A.R.; Pakzad, S. [Pennsylvania State Univ., University Park, PA (United States)

1994-06-01T23:59:59.000Z

456

Automated visual direction : LDRD 38623 final report.  

Science Conference Proceedings (OSTI)

Mobile manipulator systems used by emergency response operators consist of an articulated robot arm, a remotely driven base, a collection of cameras, and a remote communications link. Typically the system is completely teleoperated, with the operator using live video feedback to monitor and assess the environment, plan task activities, and to conduct the operations via remote control input devices. The capabilities of these systems are limited, and operators rarely attempt sophisticated operations such as retrieving and utilizing tools, deploying sensors, or building up world models. This project has focused on methods to utilize this video information to enable monitored autonomous behaviors for the mobile manipulator system, with the goal of improving the overall effectiveness of the human/robot system. Work includes visual servoing, visual targeting, utilization of embedded video in 3-D models, and improved methods of camera utilization and calibration.

Anderson, Robert J.

2005-01-01T23:59:59.000Z

457

Automated Weld Characterization Using The Thermoelectric Method  

E-Print Network (OSTI)

this paper, we examine a seldom used approach based on the thermoelectric (TE) effect for characterizing welds and their associated heat affected zone (HAZ). The thermoelectric method monitors the thermoelectric power which is sensitive to small changes in the kinetics of the conduction electrons near the Fermi surface that can be caused by changes in the local microstructure. The technique has been applied to metal sorting, quality testing, flaw detection, thickness gauging of layers, and microscopic structural analysis[1-6]. To demonstrate the effectiveness of the technique for characterizing welds, a series of tungsten-inert-gas welded Inconel-718 samples were scanned with a computer controlled TE probe. The samples were then analyzed using a scanning electron microscope and Rockwell hardness tests to characterize the weld and the associated HAZ. We then correlated the results with the TE measurements to provide quantitative information on the size of the HAZ and the degree of hardness of the material in the weld region. This provides potentially valuable information on the strength and fatigue life of the weld. We begin the paper by providing a brief review of the TE technique and then highlight some of the factors that can effect the measurements. Next, we provide an overview of the experimental procedure and discuss the results. Finally, we summarize our findings and consider areas for future research. INTRODUCTION TO THERMOELECTRICITY The thermoelectric technique is based on an effect first discovered by Seebeck in 1822. Seebeck found that when two dissimilar conductors A and B make a circuit a current will flow when the junctions of the two conductors are at different temperatures (Fig. 1). The Seebeck effect occurs because at the hot end, electrons are excited ...

J. P. Fulton; B. Wincheski; M. Namkung

1993-01-01T23:59:59.000Z

458

Open Automated Demand Response Dynamic Pricing Technologies and Demonstration  

E-Print Network (OSTI)

OASIS SDO. 2010b. Energy Market Information Exchange (eMIX)11 Wholesale Electricity Market InformationWholesale Electricity Market Information Systems Several

Ghatikar, Girish

2010-01-01T23:59:59.000Z

459

Information Management Architecture for an Integrated Computing Environment for the Environmental Restoration Program. Volume 1, Introduction  

SciTech Connect

As part of the Environmental Restoration Program at Martin Marietta, IEM (Information Engineering Methodology) was developed as part of a complete and integrated approach to the progressive development and subsequent maintenance of automated data sharing systems. This approach is centered around the organization`s objectives, inherent data relationships and business practices. IEM provides the Information Systems community with a tool kit of disciplined techniques supported by automated tools. It includes seven stages: Information Strategy Planning; Business Area Analysis; Business System Design; Technical Design; Construction; Transition; Production.

Not Available

1994-09-01T23:59:59.000Z

460

Automated coregistration of MTI spectral bands.  

SciTech Connect

In the focal plane of a pushbroom imager, a linear array of pixels is scanned across the scene, building up the image one row at a time. For the Multispectral Thermal Imager (MTI), each of fifteen different spectral bands has its own linear array. These arrays are pushed across the scene together, but since each band's array is at a different position on the focal plane, a separate image is produced for each band. The standard MTI data products resample these separate images to a common grid and produce coregistered multispectral image cubes. The coregistration software employs a direct 'dead reckoning' approach. Every pixel in the calibrated image is mapped to an absolute position on the surface of the earth, and these are resampled to produce an undistorted coregistered image of the scene. To do this requires extensive information regarding the satellite position and pointing as a function of time, the precise configuration of the focal plane, and the distortion due to the optics. These must be combined with knowledge about the position and altitude of the target on the rotating ellipsoidal earth. We will discuss the direct approach to MTI coregistration, as well as more recent attempts to 'tweak' the precision of the band-to-band registration using correlations in the imagery itself.

Theiler, J. P. (James P.); Galbraith, A. E. (Amy E.); Pope, P. A. (Paul A.); Ramsey, K. A. (Keri A.); Szymanski, J. J. (John J.)

2002-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Automated data system for emergency meteorological response  

SciTech Connect

The Savannah River Plant (SRP) releases small amounts of radioactive nuclides to the atmosphere as a consequence of the production of radioisotopes. The potential for larger accidental releases to the atmosphere also exists, although the probability for most accidents is low. To provide for emergency meteorological response to accidental releases and to conduct research on the transport and diffusion of radioactive nuclides in the routine releases, a series of high-quality meteorological sensors have been located on towers in and about SRP. These towers are equipped with instrumentation to detect and record temperature and wind turbulence. Signals from the meterological sensors are brought by land-line to the SRL Weather Center-Analysis Laboratory (WC-AL). At the WC-AL, a Weather Information and Display (WIND) system has been installed. The WIND system consists of a minicomputer with graphical displays in the WC-AL and also in the emergency operating center (EOC) of SRP. In addition, data are available to the system from standard weather teletype services, which provide both routine surface weather observations and routine upper air wind and temperature observations for the southeastern United States. Should there be an accidental release to the atmosphere, available recorded data and computer codes would allow the calculation and display of the location, time, and downwind concentration of the atmospheric release. These data are made available to decision makers in near real-time to permit rapid decisive action to limit the consequences of such accidental releases. (auth)

Kern, C.D.

1975-01-01T23:59:59.000Z

462

A Case Study: Preparing for the Smart Grids - Identifying Current Practice for Information Security Incident Management in the Power Industry  

Science Conference Proceedings (OSTI)

The power industry faces the implementation of smart grids, which will introduce new information security threats to the power automation systems. The ability to appropriately prepare for, and respond to, information security incidents, is of utmost ... Keywords: Information security, incident respons, smart grids

Maria B. Line

2013-03-01T23:59:59.000Z

463

Development of an Automated Pit Packaging System for Pantex  

E-Print Network (OSTI)

Sandia National Laboratories is developing a system that uses robots to package pits at Pantex in the AT-400A pit storage and transportation container. This report will give an overview of the AT-400A packaging process, and the parts of the overall AT-400A packaging operation that will be performed robotically. The process employed to move from development in the laboratory at Sandia to production use at Pantex will be described. Finally, important technology components being developed for and incorporated into the robotic system will be described. ____________________________________________________________________________ 2 Development of an Automated Pit Packaging System for Pantex Intentionally Left Blank ______________________________________________________________________________ Development of an Automated Pit Packaging System for Pantex 3 Contents 1. Introduction........................................................................................................... 7 ...

Jill Fahrenholtz Manufacturing; System For Pantex; Jill C. Fahrenholtz

1997-01-01T23:59:59.000Z

464

A data automation system at Los Alamos National Laboratory.  

Science Conference Proceedings (OSTI)

Idaho National Engineering and Environmental Laboratory (INEEL) has developed an automated computer program, Data Review Expert System (DRXS), for reviewing nondestructive assay (NDA) data. DRXS significantly reduces the data review time needed to meet characterization requirements for the Waste Isolation Pilot Plant (WIPP). Los Alamos National Laboratory (LANL) is in the process of developing a computer program, Software System Logic for Intelligent Certification (SSLIC), to automate other tasks associa ted with characterization of Transuranic Waste (TRU) samples. LANL has incorporated a version of DRXS specific to LANL's isotopic data into SSLIC. This version of SSLIC was audited by the National Transuranic Program on October, 24, 2001. This paper will present the results of the audit, and discuss future plans for SSLIC including the integration on the INEELLANL developed Rule Editor.

Betts, S. E. (Stephen E.); Schneider, C. M. (Connie M.); Pickrell, M. M. (Mark Manley)

2001-01-01T23:59:59.000Z

465

Optimizing automated gas turbine fault detection using statistical pattern recognition  

SciTech Connect

A method enabling the automated diagnosis of Gas Turbine Compressor blade faults, based on the principles of statistical pattern recognition is initially presented. The decision making is based on the derivation of spectral patterns from dynamic measurements data and then the calculation of discriminants with respect to reference spectral patterns of the faults while it takes into account their statistical properties. A method of optimizing the selection of discriminants using dynamic measurements data is also presented. A few scalar discriminants are derived, in such a way that the maximum available discrimination potential is exploited. In this way the success rate of automated decision making is further improved, while the need for intuitive discriminant selection is eliminated. The effectiveness of the proposed methods is demonstrated by application to data coming from an Industrial Gas Turbine while extension to other aspects of Fault Diagnosis is discussed. 9 refs.

Loukis, E.; Mathioudakis, K.; Papailiou, K. (Athens National Technical Univ. (Greece))

1992-01-01T23:59:59.000Z

466

Optimizing automated gas turbine fault detection using statistical pattern recognition  

SciTech Connect

A method enabling the automated diagnosis of gas turbine compressor blade faults, based on the principles of statistical pattern recognition, is initially presented. The decision making is based on the derivation of spectral patterns from dynamic measurement data and then the calculation of discriminants with respect to reference spectral patterns of the faults while it takes into account their statistical properties. A method of optimizing the selection of discriminants using dynamic measurement data is also presented. A few scalar discriminants are derived, in such a way that the maximum available discrimination potential is exploited. In this way the success rate of automated decision making is further improved, while the need for intuitive discriminant selection is eliminated. The effectiveness of the proposed methods is demonstrated by application to data coming from an industrial gas turbine while extension to other aspects of fault diagnosis is discussed.

Loukis, E.; Mathioudakis, K.; Papailiou, K. (National Technical Univ. of Athens (Greece). Lab. of Thermal Turbomachines)

1994-01-01T23:59:59.000Z

467

Less Impact Of Power Failures Due To Substation Automation  

E-Print Network (OSTI)

This paper is an attempt to convey that SA can be used to effectively deal with the problems of power interruptions, in that its devices serve as data sources to assess the actual service conditions of main capital plant items, and in that they enable automated and intelligent power restoration procedures as a measure to reduce the power interruption duration, and to avoid the consequences of loss of power for the consumer ' s business

Volker Lohmann Abb; Volker Lohmann; Otto Preiss

1999-01-01T23:59:59.000Z

468

AutoDipole - Automated generation of dipole subtraction terms -  

E-Print Network (OSTI)

We present an automated generation of the subtraction terms for next-to-leading order QCD calculations in the Catani-Seymour dipole formalism. For a given scattering process with n external particles our Mathematica package generates all dipole terms, allowing for both massless and massive dipoles. The numerical evaluation of the subtraction terms proceeds with MadGraph, which provides Fortran code for the necessary scattering amplitudes. Checks of the numerical stability are discussed.

K. Hasegawa; S. Moch; P. Uwer

2009-11-23T23:59:59.000Z

469

An Automated Home Made Low Cost Vibrating Sample Magnetometer  

E-Print Network (OSTI)

The design and operation of a homemade low cost vibrating sample magnetometer is described here. The sensitivity of this instrument is better than 10-2 emu and found to be very efficient for the measurement of magnetization of most of the ferromagnetic and other magnetic materials as a function of temperature down to 77 K and magnetic field upto 800 Oe. Both M(H) and M(T) data acquisition are fully automated employing computer and Labview software

Kundu, S

2011-01-01T23:59:59.000Z

470

Automated closure system for nuclear reactor fuel assemblies  

DOE Patents (OSTI)

A welder for automated closure of fuel pins by a pulsed magnetic process in which the open end of a length of cladding is positioned within a complementary tube surrounded by a pulsed magnetic welder. Seals are provided at each end of the tube, which can be evacuated or can receive tag gas for direct introduction to the cladding interior. Loading of magnetic rings and end caps is accomplished automatically in conjunction with the welding steps carried out within the tube.

Christiansen, David W. (Kennewick, WA); Brown, William F. (West Richland, WA)

1985-01-01T23:59:59.000Z

471

Analysis of the differences in energy simulation results between building information modeling (BIM)-based simulation method and the detailed simulation method  

Science Conference Proceedings (OSTI)

Building Information Modeling (BIM)-based simulation models have been used to automate lengthy building energy modeling processes and it enable fast acquisition of results. Recent improvements of simulation programs have continued to the increase in ...

Seongchan Kim; Jeong-Han Woo

2011-12-01T23:59:59.000Z

472

Automated hybridization/imaging device for fluorescent multiplex DNA sequencing  

DOE Patents (OSTI)

A method is disclosed for automated multiplex sequencing of DNA with an integrated automated imaging hybridization chamber system. This system comprises an hybridization chamber device for mounting a membrane containing size-fractionated multiplex sequencing reaction products, apparatus for fluid delivery to the chamber device, imaging apparatus for light delivery to the membrane and image recording of fluorescence emanating from the membrane while in the chamber device, and programmable controller apparatus for controlling operation of the system. The multiplex reaction products are hybridized with a probe, the enzyme (such as alkaline phosphatase) is bound to a binding moiety on the probe, and a fluorogenic substrate (such as a benzothiazole derivative) is introduced into the chamber device by the fluid delivery apparatus. The enzyme converts the fluorogenic substrate into a fluorescent product which, when illuminated in the chamber device with a beam of light from the imaging apparatus, excites fluorescence of the fluorescent product to produce a pattern of hybridization. The pattern of hybridization is imaged by a CCD camera component of the imaging apparatus to obtain a series of digital signals. These signals are converted by the controller apparatus into a string of nucleotides corresponding to the nucleotide sequence an automated sequence reader. The method and apparatus are also applicable to other membrane-based applications such as colony and plaque hybridization and Southern, Northern, and Western blots. 9 figs.

Weiss, R.B.; Kimball, A.W.; Gesteland, R.F.; Ferguson, F.M.; Dunn, D.M.; Di Sera, L.J.; Cherry, J.L.

1995-11-28T23:59:59.000Z

473

Automated hybridization/imaging device for fluorescent multiplex DNA sequencing  

DOE Patents (OSTI)

A method is disclosed for automated multiplex sequencing of DNA with an integrated automated imaging hybridization chamber system. This system comprises an hybridization chamber device for mounting a membrane containing size-fractionated multiplex sequencing reaction products, apparatus for fluid delivery to the chamber device, imaging apparatus for light delivery to the membrane and image recording of fluorescence emanating from the membrane while in the chamber device, and programmable controller apparatus for controlling operation of the system. The multiplex reaction products are hybridized with a probe, then an enzyme (such as alkaline phosphatase) is bound to a binding moiety on the probe, and a fluorogenic substrate (such as a benzothiazole derivative) is introduced into the chamber device by the fluid delivery apparatus. The enzyme converts the fluorogenic substrate into a fluorescent product which, when illuminated in the chamber device with a beam of light from the imaging apparatus, excites fluorescence of the fluorescent product to produce a pattern of hybridization. The pattern of hybridization is imaged by a CCD camera component of the imaging apparatus to obtain a series of digital signals. These signals are converted by the controller apparatus into a string of nucleotides corresponding to the nucleotide sequence an automated sequence reader. The method and apparatus are also applicable to other membrane-based applications such as colony and plaque hybridization and Southern, Northern, and Western blots.

Weiss, Robert B. (Salt Lake City, UT); Kimball, Alvin W. (Salt Lake City, UT); Gesteland, Raymond F. (Salt Lake City, UT); Ferguson, F. Mark (Salt Lake City, UT); Dunn, Diane M. (West Valley City, UT); Di Sera, Leonard J. (Salt Lake City, UT); Cherry, Joshua L. (Salt Lake City, UT)

1995-01-01T23:59:59.000Z

474

Design and Control of a Fully Automated Vehicle door  

E-Print Network (OSTI)

The objective of the research was to develop a fully automated vehicle car door that can detect any object obstructing its path during operation. A fully automated door concept has not yet been implemented in the car industry. The door, operated via a pull of the door handle, utilizes an IR sensor to detect objects in its path. The vehicle door utilizes a linear direct current (DC) actuator with a built in potentiometer to power and control the vehicle door. The built in potentiometer provides feedback to the system. Proportional integral (PI) control was implemented to the system in order to provide a smoother and safer operation. The rise time of the system is 0.77 seconds and settling time is 1.07 seconds. The operation time is 3 seconds for the door to either open or close. The automated door has greater benefits compared to a manually operated door, such as ensuring greater safety in door operation and enhancing the lifetime as the door will not be slammed during its cycle. In addition, the door will provide more convenience to physically challenged people, as they will be able to open and close the door with the push of a button.

Hong, Kyung-Min

2010-05-01T23:59:59.000Z

475

A Automated Tool for Supporting FMEAs of Digital Systems  

SciTech Connect

Although designs of digital systems can be very different from each other, they typically use many of the same types of generic digital components. Determining the impacts of the failure modes of these generic components on a digital system can be used to support development of a reliability model of the system. A novel approach was proposed for such a purpose by decomposing the system into a level of the generic digital components and propagating failure modes to the system level, which generally is time-consuming and difficult to implement. To overcome the associated issues of implementing the proposed FMEA approach, an automated tool for a digital feedwater control system (DFWCS) has been developed in this study. The automated FMEA tool is in nature a simulation platform developed by using or recreating the original source code of the different module software interfaced by input and output variables that represent physical signals exchanged between modules, the system, and the controlled process. For any given failure mode, its impacts on associated signals are determined first and the variables that correspond to these signals are modified accordingly by the simulation. Criteria are also developed, as part of the simulation platform, to determine whether the system has lost its automatic control function, which is defined as a system failure in this study. The conceptual development of the automated FMEA support tool can be generalized and applied to support FMEAs for reliability assessment of complex digital systems.

Yue,M.; Chu, T.-L.; Martinez-Guridi, G.; Lehner, J.

2008-09-07T23:59:59.000Z

476

Field demonstrations of communication systems for distribution automation. Final report  

Science Conference Proceedings (OSTI)

This report summarizes the results of a field demonstration of the use of UHF radio links in the 950-MHz portion of the spectrum as a communication medium for performing automated electric power distribution. Prototype radiohardware was combined with logic and control equipment developed by Westinghouse for power-line carrier automated distribution systems. Transceivers were used in the remote interactive terminals. 3dbm transceivers were used in the Central Base Station and the three Primary Radio Terminals, which functioned as system repeaters. Pre-installation field-strength measurements were made along selected radials and in spot locations to characterize the anticipated field-strength contours that would be encountered during the operational testing. A propagation model was developed that accurately predicted the conditions actually recorded. Post-installation measurements were used to further calibrate the computer model. The resulting propagation analysis proved exceedingly effective in characterizing a UHF radio system for digital communication. Data collected during a 10-month operational period supports the conclusion that 950-MHz radio is a viable communications medium for performing utility automated distribution functions. The system consists of 250 remote terminals, each interrogated from three sites. This provides 750 paths for communication performance evaluation.The reliability of the prototype radio units used in this project fell below that predicted through MTBF analysis, and did not meet utility reliability standards. The logic and control circuitry and central station required very little maintenance during the test.

Not Available

1981-06-01T23:59:59.000Z

477

Akuacom | Open Energy Information  

Open Energy Info (EERE)

Services Product California-based provider of technology and services for Automated Demand Response (Auto-DR). References Akuacom1 LinkedIn Connections CrunchBase Profile...

478

U-047: Siemens Automation License Manager Bugs Let Remote Users Deny  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7: Siemens Automation License Manager Bugs Let Remote Users 7: Siemens Automation License Manager Bugs Let Remote Users Deny Service or Execute Arbitrary Code U-047: Siemens Automation License Manager Bugs Let Remote Users Deny Service or Execute Arbitrary Code November 29, 2011 - 9:00am Addthis PROBLEM: Siemens Automation License Manager Bugs Let Remote Users Deny Service or Execute Arbitrary Code. PLATFORM: Siemens Automation License Manager 500.0.122.1 ABSTRACT: Several vulnerabilities were reported in Siemens Automation License Manager. reference LINKS: SecurityTracker Alert ID: 1026354 Bugtraq Siemens Advisory Services IMPACT ASSESSMENT: Medium Discussion: A remote user can execute arbitrary code on the target system. A remote user can cause denial of service conditions. A remote user can send specially crafted *_licensekey commands to trigger a

479

Prediction of environmental carcinogens: a strategy for the mid-1980s. [Use of computer-automated structure-evaluation (CASE) system  

SciTech Connect

Both government and the private sector have developed methods capable of detecting potentially harmful agents. This information could be used to predict possible harmful effects, suggest mechanisms of action, make risk assessment thereof, and develop nonbiased protocols. The paper describes an artificial intelligence system (Computer-Automated Structure-Evaluation (CASE) that is capable of predicting harmful effects based on structural determinants. In addition, a matrix of strategies has been devised which uses the already generated information to identify the types of assays that are the most predictive as well as the most economical.

Rosenkranz, H.S.; Klopman, G.; Chankong, V.; Pet-Edwards, J.; Haimes, Y.Y.

1984-01-01T23:59:59.000Z

480

Assessment of Commercial Building Automation and Energy Management Systems for Demand Response Applications  

Science Conference Proceedings (OSTI)

This Technical Update is an overview of commercial building automation and energy management systems with a focus on their capabilities (current and future), especially in support of demand response (DR). The report includes background on commercial building automation and energy management systems; a discussion of demand response applications in commercial buildings, including building loads and control strategies; and a review of suppliers building automation and energy management systems to support d...

2009-12-14T23:59:59.000Z

Note: This page contains sample records for the topic "24-hour automated information" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Information Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Information Science Information Science1354608000000Information ScienceSome of these resources are LANL-only and will require Remote Access.NoQuestions? 667-5809library@lanl.gov...

482

User Information  

NLE Websites -- All DOE Office Websites (Extended Search)

User Information User Information Print User Guide A step-by-step guide for users about how to apply and prepare for beam time at the ALS. Includes information about submitting a...

483

Informed Traders  

E-Print Network (OSTI)

A model is introduced in which there is a small agent who is more susceptible to the flow of information in the market than the general market participant, and who tries to implement strategies based on the additional information. In this model market participants have access to a stream of noisy information concerning the future return of an asset, whereas the informed trader has access to a further information source which is obscured by an additional noise that may be correlated with the market noise. The informed trader uses the extraneous information source to seek statistical arbitrage opportunities, while at the same time accommodating the additional risk. The amount of information available to the general market participant concerning the asset return is measured by the mutual information of the asset price and the associated cash flow. The worth of the additional information source is then measured in terms of the difference of mutual information between the general market participant and the informe...

Brody, Dorje C; Friedman, Robyn L; Hughston, Lane P

2008-01-01T23:59:59.000Z

484

About Inform  

Science Conference Proceedings (OSTI)

AOCS member magazine that provide international news on fats, oils, surfactants, detergents, and related material. inform About Inform Publications aocs articles book books cdrom cdroms detergents echapters fats inform international journal journ

485

Small- and Medium-Size Building Automation and Control System Needs: Scoping Study  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Small- and Medium-Size Building Automation and Control System Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Michael Brambley, Ph.D. Pacific Northwest National Laboratory Michael.Brambley@pnnl.gov (509) 375-6875 April 2, 2013 2 | Building Technologies Office eere.energy.gov Problem Statement * Less than 10% of the buildings have building automation systems (BAS) * Over 90% of buildings stock either: - small (<5,000 sf) or - medium-sized (between 5,000 sf and 50,000 sf)

486

Small- and Medium-Size Building Automation and Control System Needs: Scoping Study  

NLE Websites -- All DOE Office Websites (Extended Search)

Small- and Medium-Size Building Automation and Control System Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Michael Brambley, Ph.D. Pacific Northwest National Laboratory Michael.Brambley@pnnl.gov (509) 375-6875 April 2, 2013 2 | Building Technologies Office eere.energy.gov Problem Statement * Less than 10% of the buildings have building automation systems (BAS) * Over 90% of buildings stock either: - small (<5,000 sf) or - medium-sized (between 5,000 sf and 50,000 sf)

487

Automated Demand Response: The Missing Link in the Electricity Value Chain  

E-Print Network (OSTI)

Laboratory. Berkeley. Demand Response Research Center,and Automated Demand Response in Wastewater TreatmentLaboratory. Berkeley. Demand Response Research Center,

McKane, Aimee

2010-01-01T23:59:59.000Z

488

Automated Demand Response: The Missing Link in the Electricity Value Chain  

E-Print Network (OSTI)

and Open Automated Demand Response. In Grid Interop Forum.Berkeley National Laboratory. Demand Response ResearchCenter, Demand Response Research Center PIER Team Briefing,

McKane, Aimee

2010-01-01T23:59:59.000Z

489

Architecture Concepts and Technical Issues for an Open, Interoperable Automated Demand Response Infrastructure  

E-Print Network (OSTI)

energy efficiency and demand response in large facilities.was sponsored by the Demand Response Research Center whichInteroperable Automated Demand Response Infrastructure Ed

Koch, Ed; Piette, Mary Ann

2008-01-01T23:59:59.000Z

490

Fast Automated Demand Response to Enable the Integration of Renewable Resources  

E-Print Network (OSTI)

Consulting), and Dave Shroyer (SCG). Demand Response andOpen Automated Demand Response Opportunities for DataIAW Research Team, Demand Response Research Center, Lawrence

Watson, David S.

2013-01-01T23:59:59.000Z

491

Automated Critical Peak Pricing Field Tests: 2006 Pilot Program Description and Results  

E-Print Network (OSTI)

Techniques for Demand Response. Lawrence BerkeleyCommunications for DemandResponseandEnergyEfficiencyfor Automated Demand Response Demonstration. 2004.

Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila

2007-01-01T23:59:59.000Z

492

Open Automated Demand Response Communications in Demand Response for Wholesale Ancillary Services  

E-Print Network (OSTI)

A. Barat, D. Watson. 2006 Demand Response Spinning ReserveKueck, and B. Kirby 2008. Demand Response Spinning ReserveReport 2009. Open Automated Demand Response Communications

Kiliccote, Sila

2010-01-01T23:59:59.000Z

493

Modeling object identification and tracking errors on automated spatial safety assessment of earthmoving operations.  

E-Print Network (OSTI)

??Recent research studies have been conducted for automating the safety assessment process in order to identify risks and safety hazards on a job site without (more)

Chi, Seok Ho

2010-01-01T23:59:59.000Z

494

Rnnotator: an automated de novo transcriptome assembly pipeline from stranded RNA-Seq reads  

E-Print Network (OSTI)

transcriptome assembly pipeline from stranded RNA-Seq readsRnnotator assembly pipeline. Figure 2. Read dereplicationan automated software pipeline that generates transcript

Martin, Jeffrey

2011-01-01T23:59:59.000Z

495

Grid Information Security Functional Requirement - Fulfilling Information Security of a Smart Grid System  

E-Print Network (OSTI)

This paper describes the background of smart information infrastructure and the needs for smart grid information security. It introduces the conceptual analysis to the methodology with the application of hermeneutic circle and information security functional requirement identification. Information security for the grid market cover matters includes automation and communications industry that affects the operation of electric power systems and the functioning of the utilities that manage them and its awareness of this information infrastructure has become critical to the reliability of the power system. Community benefits from of cost savings, flexibility and deployment along with the establishment of wireless communications. However, concern revolves around the security protections for easily accessible devices such as the smart meter and the related communications hardware. On the other hand, the changing points between traditional versus smart grid networking trend and the information security importance on...

Ling, Amy Poh Ai; 10.5121/ijgca.2011.2201

2011-01-01T23:59:59.000Z

496

Context-based automated defect classification system using multiple morphological masks  

DOE Patents (OSTI)

Automatic detection of defects during the fabrication of semiconductor wafers is largely automated, but the classification of those defects is still performed manually by technicians. This invention includes novel digital image analysis techniques that generate unique feature vector descriptions of semiconductor defects as well as classifiers that use these descriptions to automatically categorize the defects into one of a set of pre-defined classes. Feature extraction techniques based on multiple-focus images, multiple-defect mask images, and segmented semiconductor wafer images are used to create unique feature-based descriptions of the semiconductor defects. These feature-based defect descriptions are subsequently classified by a defect classifier into categories that depend on defect characteristics and defect contextual information, that is, the semiconductor process layer(s) with which the defect comes in contact. At the heart of the system is a knowledge database that stores and distributes historical semiconductor wafer and defect data to guide the feature extraction and classification processes. In summary, this invention takes as its input a set of images containing semiconductor defect information, and generates as its output a classification for the defect that describes not only the defect itself, but also the location of that defect with respect to the semiconductor process layers.

Gleason, Shaun S. (Knoxville, TN); Hunt, Martin A. (Knoxville, TN); Sari-Sarraf, Hamed (Lubbock, TX)

2002-01-01T23:59:59.000Z

497

Hybrid digital signal processing and neural networks for automated diagnostics using NDE methods  

Science Conference Proceedings (OSTI)

The primary purpose of the current research was to develop an integrated approach by combining information compression methods and artificial neural networks for the monitoring of plant components using nondestructive examination data. Specifically, data from eddy current inspection of heat exchanger tubing were utilized to evaluate this technology. The focus of the research was to develop and test various data compression methods (for eddy current data) and the performance of different neural network paradigms for defect classification and defect parameter estimation. Feedforward, fully-connected neural networks, that use the back-propagation algorithm for network training, were implemented for defect classification and defect parameter estimation using a modular network architecture. A large eddy current tube inspection database was acquired from the Metals and Ceramics Division of ORNL. These data were used to study the performance of artificial neural networks for defect type classification and for estimating defect parameters. A PC-based data preprocessing and display program was also developed as part of an expert system for data management and decision making. The results of the analysis showed that for effective (low-error) defect classification and estimation of parameters, it is necessary to identify proper feature vectors using different data representation methods. The integration of data compression and artificial neural networks for information processing was established as an effective technique for automation of diagnostics using nondestructive examination methods.

Upadhyaya, B.R.; Yan, W. [Tennessee Univ., Knoxville, TN (United States). Dept. of Nuclear Engineering

1993-11-01T23:59:59.000Z

498

General Information  

Science Conference Proceedings (OSTI)

... at the Embassy Suites Hotel, Pittsburgh, Pennsylvania. For more information on this location, check out the travel information and destination highlights page.

499

Peering Information  

NLE Websites -- All DOE Office Websites (Extended Search)

Peering Information Network Overview Tools Peering Information Interactive Network Map Network Maps Connected Sites Contact Us Technical Assistance: 1 800-33-ESnet (Inside the US)...

500

Automated Demand Response Technology Demonstration Project for Small and  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Demonstration Project for Small and Technology Demonstration Project for Small and Medium Commercial Buildings Title Automated Demand Response Technology Demonstration Project for Small and Medium Commercial Buildings Publication Type Report LBNL Report Number LBNL-4982E Year of Publication 2011 Authors Page, Janie, Sila Kiliccote, Junqiao Han Dudley, Mary Ann Piette, Albert K. Chiu, Bashar Kellow, Edward Koch, and Paul Lipkin Date Published 07/2011 Publisher CEC/LBNL Keywords demand response, emerging technologies, market sectors, medium commercial business, openadr, small commercial, small commercial business, technologies Abstract Small and medium commercial customers in California make up about 20-25% of electric peak load in California. With the roll out of smart meters to this customer group, which enable granular measurement of electricity consumption, the investor-owned utilities will offer dynamic prices as default tariffs by the end of 2011. Pacific Gas and Electric Company, which successfully deployed Automated Demand Response (AutoDR) Programs to its large commercial and industrial customers, started investigating the same infrastructures application to the small and medium commercial customers. This project aims to identify available technologies suitable for automating demand response for small-medium commercial buildings; to validate the extent to which that technology does what it claims to be able to do; and determine the extent to which customers find the technology useful for DR purpose. Ten sites, enabled by eight vendors, participated in at least four test AutoDR events per site in the summer of 2010. The results showed that while existing technology can reliably receive OpenADR signals and translate them into pre-programmed response strategies, it is likely that better levels of load sheds could be obtained than what is reported here if better understanding of the building systems were developed and the DR response strategies had been carefully designed and optimized for each site.