National Library of Energy BETA

Sample records for 2012-q1 100 80

  1. R.C.W. 80-50-100 | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: R.C.W. 80-50-100Legal Abstract This section includes recommendations to the governor -...

  2. w80 | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    w80

  3. RD100

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RD100 - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced Nuclear Energy

  4. New Water Booster Pump System Reduces Energy Consumption by 80...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This case study outlines how General Motors (GM) developed a highly efficient pumping ... As a result, the company reduced pumping system energy consumption by 80 percent (225,100 ...

  5. 80

    Energy Savers [EERE]

    Rulemakings - Implementation Report: Energy Conservation Standards Activities | Department of Energy 7th Semi-Annual Report to Congress on Appliance Energy Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities 7th Semi-Annual Report to Congress on Appliance Energy Efficiency Rulemakings - Implementation Report: Energy Conservation Standards Activities This document is the 7th Semi-Annual Report to Congress on Appliance Energy Efficiency Rulemakings -

  6. AFR-100 safety analyses

    SciTech Connect (OSTI)

    Sumner, T.; Moisseytsev, A.; Wei, T. Y. C.

    2012-07-01

    The Advanced Fast Reactor-100 (AFR-100) is Argonne National Laboratory's 250 MWth metal-fueled modular sodium-cooled pool-type fast reactor concept. [1] A series of accident sequences that focused on the AFR-100's ability to provide protection against reactor damage during low probability accident sequences resulting from multiple equipment failures were examined. Protected and Unprotected Loss of Flow (PLOF and ULOF) and Unprotected Transient Over-Power (UTOP) accidents were simulated using the SAS4A/SASSYS-1 safety analysis code. The large heat capacity of the sodium in the pool-type reactor allows the AFR-100 to absorb large amounts of energy during a PLOF with relatively small temperature increases throughout the system. During a ULOF with a 25-second flow halving time, coolant and cladding temperatures peak around 720 deg. C within the first minute before reactivity feedback effects decrease power to match the flow. Core radial expansion and fuel Doppler provide the necessary feedback during the UTOP to bring the system back to critical before system temperatures exceed allowable limits. Simulation results indicate that adequate ULOF safety margins exist for the AFR-100 design with flow halving times of twenty-five seconds. Significant safety margins are maintained for PLOF accidents as well as UTOP accidents if a rod stop is used. (authors)

  7. NA 80 - Associate Administrator for Counterterrorism and

    National Nuclear Security Administration (NNSA)

    Counterproliferation | National Nuclear Security Administration 80 - Associate Administrator for Counterterrorism and Counterproliferation

  8. Science at 100 T

    SciTech Connect (OSTI)

    Harrison, Neil [Los Alamos National Laboratory

    2012-06-01

    100 tesla fields are essential for answering many key questions in condensed matter: (1) Collapse of magnetic length crucial tool for understanding high Tc superconductors; (2) Field can also behave as 'negative pressure' in condensed matter; and (3) Field-tuned emergent phenomena involving commensurability effects.

  9. Sampling Instruction: 100-D-100 and 100-D-30/104 Excavation Sites

    SciTech Connect (OSTI)

    Truex, Michael J.; Vermeul, Vincent R.; Qafoku, Nikolla; Lee, Brady D.

    2014-08-01

    This document describes procedures that will be used to obtain and analyze samples a the 100-D-100 and 100-D-30/104 excavation sites in the 100 Area of Hanford.

  10. FIRST 100 T NON-DESTRUCTIVE MAGNET

    SciTech Connect (OSTI)

    J. R. SIMS; ET AL

    1999-10-01

    The first 100 T non-destructive (100 T ND) magnet and power supplies as currently designed are described. This magnet will be installed as part of the user facility research equipment at the National High Magnetic Field Laboratory (NHMFL) Pulsed Field Facility at Los Alamos National Laboratory. The 100 T ND magnet will provide a 100 T pulsed field of 5 ms duration (above 90% of full field) in a 15 mm diameter bore once per hour. Magnet operation will be non-destructive. The magnet will consist of a controlled power outer coil set which produces a 47 T platform field in a 225 mm diameter bore. Located within the outer coil set will be a 220 mm outer diameter capacitor powered insert coil. Using inertial energy storage a synchronous motor/generator will provide ac power to a set of seven ac-dc converters rated at 64 MW/80 MVA each. These converters will energize three independent coil circuits to create 170 MJ of field energy in the outer coil set at the platform field of 47 T. The insert will then be energized to produce the balance of the 100 T peak field using a 2.3 MJ, 18 kV (charged to 15 kV), 14.4 mF capacitor bank controlled with solid-state switches. The magnet will be the first of its kind and the first non-destructive, reusable 100 T pulsed magnet. The operation of the magnet will be described along with special features of its design and construction.

  11. {100}<100> or 45.degree.-rotated {100}<100>, semiconductor-based, large-area, flexible, electronic devices

    DOE Patents [OSTI]

    Goyal, Amit

    2012-05-15

    Novel articles and methods to fabricate the same resulting in flexible, {100}<100> or 45.degree.-rotated {100}<100> oriented, semiconductor-based, electronic devices are disclosed. Potential applications of resulting articles are in areas of photovoltaic devices, flat-panel displays, thermophotovoltaic devices, ferroelectric devices, light emitting diode devices, computer hard disc drive devices, magnetoresistance based devices, photoluminescence based devices, non-volatile memory devices, dielectric devices, thermoelectric devices and quantum dot laser devices.

  12. R&D 100 Awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    received 62 R&D 100 awards. 2015: High-power Intelligent Laser Diode System (HILADS) 2014: Convergent, Initial Surface Independent, Single Iteration, Rogue-Particle Free (CISR) ...

  13. NETL: The First 100 Years

    SciTech Connect (OSTI)

    2015-07-21

    The National Energy Technology Laboratory celebrates 100 years of innovative energy technology development. NETL has been a leader in energy technology development. This video takes a look back at the many accomplishments over the past 100 years. These advances benefit the American people, enhance our nation's energy security and protect our natural resources.

  14. New Water Booster Pump System Reduces Energy Consumption by 80 Percent and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Increases Reliability | Department of Energy Water Booster Pump System Reduces Energy Consumption by 80 Percent and Increases Reliability New Water Booster Pump System Reduces Energy Consumption by 80 Percent and Increases Reliability This case study outlines how General Motors (GM) developed a highly efficient pumping system for their Pontiac Operations Complex in Pontiac, Michigan. In short, GM was able to replace five original 60- to 100-hp pumps with three 15-hp pumps whose speed could

  15. 71-100-01d

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SPECIFIED DIMENSIONS ARE IN MM AND TOLERANCES ARE: JS13 higs target room shielding layout for experiment planning 71-100-01d 1 1 E DUKE UNIVERSITY FREE ELECTRON LASER...

  16. WIPP Receives 100th Shipment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Waste Isolation Pilot Plant Receives 100 th Shipment CARLSBAD, N.M., October 19, 2000 - The 100 th shipment of defense-generated transuranic radioactive waste has arrived safely at the U.S. Department of Energy's (DOE) Waste Isolation Pilot Plant (WIPP). The shipment came from DOE's Rocky Flats Environmental Technology Site (RFETS) in Colorado. "This is a major milestone for WIPP as we work toward clean up of DOE sites across the country," said Dr. Inés Triay, Manager of the Carlsbad

  17. CX-100 and TX-100 blade field tests.

    SciTech Connect (OSTI)

    Holman, Adam (USDA-Agriculture Research Service, Bushland, TX); Jones, Perry L.; Zayas, Jose R.

    2005-12-01

    In support of the DOE Low Wind Speed Turbine (LWST) program two of the three Micon 65/13M wind turbines at the USDA Agricultural Research Service (ARS) center in Bushland, Texas will be used to test two sets of experimental blades, the CX-100 and TX-100. The blade aerodynamic and structural characterization, meteorological inflow and wind turbine structural response will be monitored with an array of 75 instruments: 33 to characterize the blades, 15 to characterize the inflow, and 27 to characterize the time-varying state of the turbine. For both tests, data will be sampled at a rate of 30 Hz using the ATLAS II (Accurate GPS Time-Linked Data Acquisition System) data acquisition system. The system features a time-synchronized continuous data stream and telemetered data from the turbine rotor. This paper documents the instruments and infrastructure that have been developed to monitor these blades, turbines and inflow.

  18. Two small businesses selected for work valued at $80 million

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Businesses compete for drilling, monitoring work Two small businesses selected for work valued at 80 million Two small businesses compete for up to 80 million in well drilling ...

  19. New Water Booster Pump System Reduces Energy Consumption by 80...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Water Booster Pump System Reduces Energy Consumption by 80 Percent and Increases Reliability New Water Booster Pump System Reduces Energy Consumption by 80 Percent and Increases ...

  20. NA 80 - Associate Administrator for Counterterrorism andCounterprolif...

    National Nuclear Security Administration (NNSA)

    Us Our Operations Management and Budget Office of Civil Rights Workforce Statistics NA 80 - Associate Administrator for Counterterrorism ... NA 80 - Associate...

  1. 8.0 FACILITY DISPOSITION PROCESS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8-1 8.0 FACILITY DISPOSITION PROCESS 8.1 INTRODUCTION The facility disposition process defines the approach by which DOE, with involvement of the lead regulatory agencies, will take a facility from operational status to its end state condition (final disposition) at Hanford. This is accomplished by the completion of facility transition, surveillance and maintenance (S&M), and disposition phase activities. The process is designed to integrate DOE Order 430.1B, U.S. Department of Energy Real

  2. Science up to 100 tesla

    SciTech Connect (OSTI)

    Campbell, L.J. [Los Alamos National Lab., NM (United States). National High Magnetic Field Lab.

    1995-05-01

    100 Tesla is the highest attainable field that can be held for milli-sec in a non-destructive magnet. The strongest steels turn soft under stresses of 4GPa, which is the magnetic pressure of 100 T. Until there is a breakthrough in materials, magnets having all the low temperature and high pressure trimmings will be limited to about 100 T. Within the field range 1-100 T far more resources are now devoted to producing the highest possible continuous fields (40+5 T) than to producing longer pulsed fields above 50 T. This illustrates that the utility of the field can be more important than the strength of the field to researchers in condensed matter. Discoveries are typically made in new territory, but this can be new combinations of pressure, temperature, and magnetic field, or new probes and new materials. If any activity has kept up with the proliferation of new experiments and new facilities in high magnetic field research it is the listing of experiments that could and should be done in high fields. Part of the reason for the vitality of high field research is that high fields provide a generic environment. Compared to particle accelerators and plasma machines a high field laboratory is a setting for generic science, like synchrotron light sources or neutron scattering centers. Although the latter two installations probes states, while a magnetic field creates a state. Because it is unrealistic to try to list all the science opportunities at high fields, the author list sources for lists in the public domain and gives a few examples.

  3. United States Wind Resource Map: Annual Average Wind Speed at 80 Meters

    Wind Powering America (EERE)

    80 m 01-APR-2011 2.1.1 Wind Speed m/s >10.5 10.0 9.5 9.0 8.5 8.0 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 < 4.0 Source: Wind resource estimates developed by AWS Truepower, LLC for windNavigator . Web: http://www.windnavigator.com | http://www.awstruepower.com. Spatial resolution of wind resource data: 2.5 km. Projection: Albers Equal Area WGS84. ¶

  4. Machinability study of Aermet 100

    SciTech Connect (OSTI)

    Squire, D.V.; Syn, C.K.; Fix, B.L.

    1995-02-08

    Machinability of Aermet 100, an ultrahigh strength alloy developed for Navy by Carpenter Technology as a candidate material for aircraft landing gear application, was studied by performing single-point turning tests. Coated and uncoated carbides, ceramic, and cermet cutting tool inserts of a square geometry (SNG 432 type) were used. Round stock workpieces were tested in the as - received, unaged condition and without using any cutting fluid. The turning tests for each tool material were conducted by (i) first establishing the cutting conditions that would allow the continued generation of broken chips during a given cutting test, (ii) measuring intermittently the flank wear as a function of cutting time under such established cutting conditions for discontinuous broken chips, and (iii) determining the tool life using the criteria specified in the ISO Standard 3685: 1993(E). Cutting tools except some uncoated carbide and ceramic were used with a mechanical chip breaker to induce chip breakage and avoid the generation of long continuous chips. The results obtained include the optimal cutting conditions for discontinuous chips, tool wear - cutting time curves, and records of tool life and tool failure mode for each tool material. From the measured tool life and cutting conditions, the amount of material removed by each cutting material was calculated. Coated carbide with CVD tri-phase coating showed the longest tool life that exceeded the twelve minute criterion and removed the highest amount of material per tool. Other tools failed by cutting edge chipping and their lives were shorter.

  5. R.C.W. 80-50 | Open Energy Information

    Open Energy Info (EERE)

    Citation R.C.W. 80-50 (1994). Retrieved from "http:en.openei.orgwindex.php?titleR.C.W.80-50&oldid884441" Feedback Contact needs updating Image needs updating...

  6. R&D 100 Awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    R&D 100 Awards R&D 100 Awards The Laboratory's discoveries, developments, advancements, and inventions make America-and the world-a better and safer place, bolster national security, and enhance national competitiveness. The R&D 100 Awards honor the top 100 proven technological advances of the year. A continuing winning streak since 1978 The R&D 100 Awards, selected by a group of R&D Magazine's elite judges, honor the top 100 proven technological advances of the year. These

  7. Martian laser surpasses 100,000 zaps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Martian laser surpasses 100,000 zaps Martian laser surpasses 100,000 zaps ChemCam zaps rocks with a high-powered laser to determine their composition and carries a camera that can ...

  8. 100 LPW 800 Lm Warm White LED

    SciTech Connect (OSTI)

    Sun, Decai

    2010-10-31

    An illumination grade warm white (WW) LED, having correlated color temperature (CCT) between 2800 K and 3500K and capable of producing 800 lm output at 100 lm/W, has been developed in this program. The high power WW LED is an ideal source for use as replacement for incandescent, and Halogen reflector and general purpose lamps of similar lumen value. Over the two year period, we have made following accomplishments: developed a high power warm white LED product and made over 50% improvements in light output and efficacy. The new high power WW LED product is a die on ceramic surface mountable LED package. It has four 1x1 mm{sup 2} InGaN pump dice flip chip attached to a ceramic submount in 2x2 array, covered by warm white phosphor ceramic platelets called Lumiramica and an overmolded silicone lens encapsulating the LED array. The performance goal was achieved through breakthroughs in following key areas: (1) High efficiency pump LED development through pump LED active region design and epi growth quality improvement (funded by internal programs). (2) Increase in injection efficiency (IE) represented by reduction in forward voltage (V{sub f}) through the improvement of the silver-based p-contact and a reduction in spreading resistance. The injection efficiency was increased from 80% at the start of the program to 96% at the end of the program at 700 mA/mm{sup 2}. (3) Improvement in thermal design as represented by reduction in thermal resistance from junction to case, through improvement of the die to submount connection in the thin film flip chip (TFFC) LED and choosing the submount material of high thermal conductivity. A thermal resistance of 1.72 K/W was demonstrated for the high power LED package. (4) Improvement in extraction efficiency from the LED package through improvement of InGaN die level and package level optical extraction efficiency improvement. (5) Improvement in phosphor system efficiency by improving the lumen equivalent (LE) and phosphor package efficiency (PPE) through improvement in phosphor-package interactions. Another achievement in the development of the phosphor integration technology is the demonstration of tight color control. The high power WW LED product developed has been proven to have good reliability. The manufacturing of the product will be done in Philips Lumileds LUXEON Rebel production line which has produced billions of high power LEDs. The first high power WW LED product will be released to the market in 2011.

  9. JLab Cluster Tops 100 Teraflops | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cluster Tops 100 Teraflops JLab Cluster Tops 100 Teraflops NEWPORT NEWS, VA, Oct. 14 - The fastest computer system in Hampton Roads has booted up with more than 100 Teraflops of processing power. Located at the Department of Energy's Thomas Jefferson National Accelerator Facility, the cluster computer system was recently upgraded with video game components to assist scientists in modeling the smallest bits of matter in the universe. "Our resources crossed 100 Teraflops of sustained

  10. PP-80 Citizens Utility Company | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Citizens Utility Company to construct, opertate, and maintain transmission facilities at the U.S. - Canada Border. PDF icon PP-80 Citizens Utility Company More Documents & ...

  11. FIRST 100 T NON-DESTRUCTIVE MAGNET OUTER COIL SET

    SciTech Connect (OSTI)

    J. BACON; A. BACA; ET AL

    1999-09-01

    The controlled power outer coil set of the first 100 T non-destructive (100 T ND) magnet is described. This magnet will be installed as part of the user facility research equipment at the National High Magnetic Field laboratory (NHMFL) Pulsed Field Facility at Los Alamos National Laboratory. The 100 T ND controlled power outer coil set consists of seven nested, mechanically independent externally reinforced coils. These coils, in combination, will produce a 47 T platform field in a 225-mm diameter bore. Using inertial energy storage a synchronous motor/generator provides ac power to a set of seven ac-dc converters rated at 64 MW/80 MVA each. These converters energize three independent coil circuits to create 170 MJ of field energy in the outer coil set at the platform field of 47 T. Each coil consists of a multi-layer winding of high strength conductor supported by an external high strength stainless steel shell. Coils with the highest magnetic loads will utilize a reinforcing shell fabricated from highly cold worked 301 stainless steel strip. The autofrettage conditioning method will be used to pre-stress the coils and thereby limit conductor and reinforcement strains to the elastic range. The purpose of pre-stressing the coils is to attain a design life of 10,000 full field pulses. The operation and conditioning of the coil set will be described along with special features of its design, magnetic and structural analyses and construction.

  12. Sandia National Laboratories: 100 Resilient Cities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    100 Resilient Cities - Sandia Challenge Facebook Twitter YouTube Flickr RSS 100 Resilient Cities - Sandia Challenge 100 Resilient Cities Helping leaders better assess resilience challenges Picture of global map and transportation Providing technical expertise to help cities better address the shocks & stresses of the 21st Century Solar panels Energy Researcher in lab Water Medical image Medical Red and green peppers Food Picture of globe Economy Map of city Risk Analysis Worker and machine

  13. Reaching 100% Renewable Energy, City of Aspen

    SciTech Connect (OSTI)

    2015-08-01

    This brochure describes the analysis and process used by NREL to assist the City of Aspen in attaining its 100% renewable energy goal.

  14. TX-100 manufacturing final project report.

    SciTech Connect (OSTI)

    Ashwill, Thomas D.; Berry, Derek S.

    2007-11-01

    This report details the work completed under the TX-100 blade manufacturing portion of the Carbon-Hybrid Blade Developments: Standard and Twist-Coupled Prototype project. The TX-100 blade is a 9 meter prototype blade designed with bend-twist coupling to augment the mitigation of peak loads during normal turbine operation. This structural coupling was achieved by locating off axis carbon fiber in the outboard portion of the blade skins. The report will present the tooling selection, blade production, blade instrumentation, blade shipping and adapter plate design and fabrication. The baseline blade used for this project was the ERS-100 (Revision D) wind turbine blade. The molds used for the production of the TX-100 were originally built for the production of the CX-100 blade. The same high pressure and low pressure skin molds were used to manufacture the TX-100 skins. In order to compensate for the difference in skin thickness between the CX-100 and the TX-100, however, a new TX-100 shear web plug and mold were required. Both the blade assembly fixture and the root stud insertion fixture used for the CX-100 blades could be utilized for the TX-100 blades. A production run of seven TX-100 prototype blades was undertaken at TPI Composites during the month of October, 2004. Of those seven blades, four were instrumented with strain gauges before final assembly. After production at the TPI Composites facility in Rhode Island, the blades were shipped to various test sites: two blades to the National Wind Technology Center at the National Renewable Energy Laboratory in Boulder, Colorado, two blades to Sandia National Laboratory in Albuquerque, New Mexico and three blades to the United States Department of Agriculture turbine field test facility in Bushland, Texas. An adapter plate was designed to allow the TX-100 blades to be installed on existing Micon 65/13M turbines at the USDA site. The conclusion of this program is the kick-off of the TX-100 blade testing at the three testing facilities.

  15. Westinghouse 100 kWe SOFC demonstration status

    SciTech Connect (OSTI)

    Veyo, S.

    1996-12-31

    The world`s first 100 kWe class Solid Oxide Fuel Cell (SOFC) power generation system is being supplied by Westinghouse and is sponsored by EDB/ELSAM, a consortium of Dutch and Danish utilities. This natural gas fueled experimental field unit will be installed near Arnhem, The Netherlands, at an auxiliary district heating plant. The module utilizes tubular Air Electrode Supported SOFCs. The system will achieve an electrical generation efficiency of 49%, and this combined with recovery of heat for district heating can yield an overall fuel effectiveness approaching 80%. Significant progress toward reduction of CO{sub 2}, a greenhouse gas, will be obtained, and the system will be environmentally benign.

  16. New Water Booster Pump System Reduces Energy Consumption by 80...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BENEFITS A Motor Challeng NEW WATER BOOSTER PUMP SYSTEM REDUCES ENERGY CONSUMPTION BY 80 ... * * * APPLICATIONS The use of a single pump with a recirculation line to serve a wide ...

  17. DOE Collects $80,000 Civil Penalty From Showerhead Manufacturer |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy $80,000 Civil Penalty From Showerhead Manufacturer DOE Collects $80,000 Civil Penalty From Showerhead Manufacturer August 10, 2011 - 4:54pm Addthis The DOE Office of Enforcement has settled a civil penalty action against Hudson-Reed, Limited, after the manufacturer failed to certify over 60 of its showerhead models. In the settlement, the manufacturer further acknowledges that its showerheads used more water than allowed by federal law. As enacted by Congress,

  18. Secretary Chu Announces Nearly $80 Million Investment for Advanced Biofuels

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research and Fueling Infrastructure | Department of Energy Million Investment for Advanced Biofuels Research and Fueling Infrastructure Secretary Chu Announces Nearly $80 Million Investment for Advanced Biofuels Research and Fueling Infrastructure January 13, 2010 - 12:00am Addthis Washington, DC - U.S. Department of Energy Secretary Steven Chu today announced the investment of nearly $80 million under the American Recovery and Reinvestment Act for advanced biofuels research and fueling

  19. 100-N Area underground storage tank closures

    SciTech Connect (OSTI)

    Rowley, C.A.

    1993-08-01

    This report describes the removal/characterization actions concerning underground storage tanks (UST) at the 100-N Area. Included are 105-N-LFT, 182-N-1-DT, 182-N-2-DT, 182-N-3-DT, 100-N-SS-27, and 100-N-SS-28. The text of this report gives a summary of remedial activities. In addition, correspondence relating to UST closures can be found in Appendix B. Appendix C contains copies of Unusual Occurrence Reports, and validated sampling data results comprise Appendix D.

  20. JLab Completes 100th Experiment | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Completes 100th Experiment JLab Completes 100th Experiment The experiment, titled "Quark Propagation through Cold QCD Matter," began its run in December 2003 and wrapped up in early March. It probed Quantum Chromodynamics (QCD), a fundamental theory of particle physics that describes the interactions of quarks and gluons - the basic building blocks of matter. A property of QCD, called confinement, states that no quark can ever be found alone. Instead, quarks combine in pairs or

  1. The XENON100 Dark Matter Experiment

    SciTech Connect (OSTI)

    Tziaferi, E.

    2010-06-23

    The XENON100 experiment is searching for WIMPs, which are particles that may consist dark matter. It is located in the underground laboratory of Gran Sasso (LNGS) in Italy at a depth of {approx}3600 m.w.e.. The experiment description, its performance and the expected background based on Monte Carlo simulations and material screening along with the projected sensitivities of the experiment are presented. In addition, a brief description of the upgrade XENON100 detector is given.

  2. Advice and Response 100 - 1 - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    100- 1 Hanford Advisory Board Convening Report SSAB Guidance Memorandum of Understanding Membership Nomination and Appointment Process Operating Ground Rules Calendars Advice and Responses Full Board Meeting Information Committee Meeting Information Outgoing Board Correspondence Key Board Products and Special Reports HAB Annual Report HAB and Committee Lists Points of Contact Related Links Advice and Response 100 - 1 Email Email Page | Print Print Page |Text Increase Font Size Decrease Font Size

  3. The System 80+ Standard Plant design control document. Volume 17

    SciTech Connect (OSTI)

    1997-12-31

    This Design Control Document (DCD) is a repository of information comprising the System 80+{trademark} Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ``Tier 1``] and the Approved Design Material (ADM) [i.e., ``Tier 2``] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains parts 2-7 and appendix 15A for section 15 (Accident Analysis) of the ADM Design and Analysis. Topics covered in these parts are: decrease in heat removal; decrease in RCS flow rate; power distribution anomalies; increase in RCS inventory; decrease in RCS inventory; release of radioactive materials. The appendix covers radiological release models. Also contained here are five technical specifications for section 16 (Technical Specifications) of the ADM Design and Analysis. They are: TS 1.0 Use and Applications; TS 2.0 Safety Limits; TS 3.0 LCO Availability; TS 3.1 Reactivity Control; and TS 3.2 Power Distribution.

  4. A 100-Gigbit Highway for Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A 100-Gigabit Highway for Science News & Publications ESnet News Media & Press Publications and Presentations Galleries ESnet Awards and Honors Contact Us Media Jon Bashor, jbashor@lbl.gov, +1 510 486 5849 or Media@es.net Technical Assistance: 1 800-33-ESnet (Inside the US) 1 800-333-7638 (Inside the US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback: info@es.net A 100-Gigabit Highway for Science Researchers Take a

  5. Thermal performance of various multilayer insulation systems below 80K

    SciTech Connect (OSTI)

    Boroski, W.N.; Nicol, T.H.; Schoo, C.J.

    1992-04-01

    The SSC collider dipole cryostat consists of a vacuum shell operating at room temperature, two thermal shields operating near 80K and 20K respectively, and the superconducting magnet assembly operating near 4K. The cryostat design incorporates multilayer insulation (MLI) blankets to limit radiant heat transfer into the 80K and 20K thermal shields. Also, an MLI blanket is used to impede heat transfer through residual gas conduction into the 4K superconducting magnet assembly. A measurement facility at Fermilab has been used to experimentally optimize the thermal insulation system for the dipole cryostat. Previous thermal measurements have been used to define the 80K MLI system configuration and verify system performance. With the 80K MLI system defined, the current effort has focused on experimentally defining the optimum insulation scheme for the 20K thermal shield. The SSC design specification requires that radiant heat transfer be limited to 0.093 W/m[sup 2] at an insulating vacuum of 10[sup [minus]6]torr.

  6. Thermal performance of various multilayer insulation systems below 80K

    SciTech Connect (OSTI)

    Boroski, W.N.; Nicol, T.H.; Schoo, C.J.

    1992-04-01

    The SSC collider dipole cryostat consists of a vacuum shell operating at room temperature, two thermal shields operating near 80K and 20K respectively, and the superconducting magnet assembly operating near 4K. The cryostat design incorporates multilayer insulation (MLI) blankets to limit radiant heat transfer into the 80K and 20K thermal shields. Also, an MLI blanket is used to impede heat transfer through residual gas conduction into the 4K superconducting magnet assembly. A measurement facility at Fermilab has been used to experimentally optimize the thermal insulation system for the dipole cryostat. Previous thermal measurements have been used to define the 80K MLI system configuration and verify system performance. With the 80K MLI system defined, the current effort has focused on experimentally defining the optimum insulation scheme for the 20K thermal shield. The SSC design specification requires that radiant heat transfer be limited to 0.093 W/m{sup 2} at an insulating vacuum of 10{sup {minus}6}torr.

  7. 100 T science at the NHMFL

    SciTech Connect (OSTI)

    Harrison, Neil

    2012-06-29

    100 T science is a vibrant area of research: (1) Collapse of magnetic length crucial tool for understanding high Tc superconductors; (2) Field can also behave as 'negative pressure' in condensed matter; and (3) Field-tuned emergent phenomena involving commensurability effects.

  8. Haiti - Annual Average Wind Speed at 80 meters

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Liberte Hinche 06-JAN-2014 3.5.1 50 0 Port-au-Prince Jacmel Les Cayes Jeremie 50 100 Kilometers DOMINI REPUBL CAN IC The wind resource estimates on this map are from model...

  9. Dominican Republic - Annual Average Wind Speed at 80 meters

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Monte Plata Bonao Elias Pina El Seibo Hato Mayor Higuey Santo Domingo La Romana San Pedro Jimani San Cristobal Azua Neiba Bani Barahona Pedernales Wind Speed ms >10.5 10.0 9.5...

  10. Design of applicative 100 W Stirling engine

    SciTech Connect (OSTI)

    Kagawa, Noboru; Hirata, Koichi; Takeuchi, Makoto

    1995-12-31

    A small 100 W displacer type Stirling engine is being developed under a project of a JSME committee, RC127. The project consists of sixteen Japanese academic researchers of universities and governmental laboratories and eleven enterprise members related to the Stirling field. The engine has very unique features. Its expansion cylinder is heated by combustion gas or solar energy directly, and a simple cooling system rejects heat from the working fluid. A regenerator is built in the displacer piston with heating and cooling tubes in which the working fluid flows from/to outer tubes. The outer tubes for heating were located at the top of the expansion cylinder and the tubes for cooling are in the middle of the cylinder. The target performance is a 100 W output with 20% thermal efficiency at the operating conditions of 923 K expansion space temperature, 343 K compression space temperature, and 1,000 rpm. The 100 W displacer engine was designed based on a design manual established by a related JSME committee, RC110. It contains several guides to design for cycle, heat exchanger system, and mechanism of most Stirling cycle machines. The engine was designed by using the fundamental method, the second and third-order analyses accomplished with the newly arranged knowledge about each component. This paper presents the engine specifications and the theoretical analysis results. The design method is also introduced briefly.

  11. Compact, maintainable 80-KeV neutral beam module

    DOE Patents [OSTI]

    Fink, Joel H. (Livermore, CA); Molvik, Arthur W. (Livermore, CA)

    1980-01-01

    A compact, maintainable 80-keV arc chamber, extractor module for a neutral beam system immersed in a vacuum of <10.sup.-2 Torr, incorporating a nested 60-keV gradient shield located midway between the high voltage ion source and surrounding grounded frame. The shield reduces breakdown or arcing path length without increasing the voltage gradient, tends to keep electric fields normal to conducting surfaces rather than skewed and reduces the peak electric field around irregularities on the 80-keV electrodes. The arc chamber or ion source is mounted separately from the extractor or ion accelerator to reduce misalignment of the accelerator and to permit separate maintenance to be performed on these systems. The separate mounting of the ion source provides for maintaining same without removing the ion accelerator.

  12. RDD-100 model development for TWRS

    SciTech Connect (OSTI)

    Gneiting, B.C.

    1996-10-01

    The purpose of this document is to describe the work performed to develop an executable model of the TWRS technical baseline using the RDD-100 Dynamic Verification Facility. The benefit of developing a DVF model that simulates the conceptual TWRS baseline system is that is provides a verification of the system performance and the traceability needed between the system requirements and the proposed architectures that will satisfy the requirements and perform the identified functions. The initial modeling results showed some potential interface and scheduling conflicts between some of the TWRS components.

  13. CENIC Honors ESnet's 100G Testbed

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CENIC Honors ESnet's 100G Testbed with 2015 Innovations in Networking Award News & Publications ESnet News Media & Press Publications and Presentations Galleries ESnet Awards and Honors Contact Us Media Jon Bashor, jbashor@lbl.gov, +1 510 486 5849 or Media@es.net Technical Assistance: 1 800-33-ESnet (Inside the US) 1 800-333-7638 (Inside the US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback: info@es.net CENIC Honors

  14. Web100-based Network Diagnostic Tool

    Energy Science and Technology Software Center (OSTI)

    2003-03-20

    NDT is a client/server based network diagnostic tool developed to aid in finding network performance and configuration problems. The tool measures data transfer rates between two internet hosts (client and server). It also gathers detailed TCP statistical variable counters supplied by the Web100 modified server and uses these TCP variables to compute the theoretical performance rate between the two internet hosts. It then compares these analytical results with the measured results to determine if performancemore » or configuration problems exist and translates these results into plain text messages to aid users and network operators in resolving reported problems.« less

  15. CAGE100: Real-Time Multi-Port Packet Capture System for 100 Gigabit Ethernet Traffic

    SciTech Connect (OSTI)

    Ali Namazi; Babak Azimi-Sadjadi; Chujen Lin

    2012-06-14

    Future large scale sciences are anticipated to use massive amount of data in their experiments. DOE?¢????s ESnet (Energy Science Network) is developing a 100 Gbps backbone based on this state-of-the-art 100 Gigabit Ethernet standard. ESnet will serve thousands of DOE and non-DOE scientists with its high bandwidth backbone, and connect several national laboratories. Current Ethernet test and debug solutions, such as network traffic capturer/analyzer tools, support up to 10 Gbps speed, and the very few capable of handling 100 Gbps are extremely costly. Such tools are essential in the development of high speed devices and routers, and ultimately the success of 100 Gigabit Ethernet.

  16. The SNL100-01 blade : carbon design studies for the Sandia 100-meter blade.

    SciTech Connect (OSTI)

    Griffith, Daniel Todd

    2013-02-01

    A series of design studies to investigate the effect of carbon on blade weight and performance for large blades was performed using the Sandia 100-meter All-glass Baseline Blade design as a starting point. This document provides a description of the final carbon blade design, which is termed as SNL100-01. This report includes a summary of the design modifications applied to the baseline all-glass 100-meter design and a description of the NuMAD model files that are made publicly available. This document is intended primarily to be a companion document to the distribution of the NuMAD blade model files for SNL100-01.

  17. Preliminary SP-100/Stirling heat exchanger designs

    SciTech Connect (OSTI)

    Schmitz, P.; Tower, L.; Dawson, R.; Blue, B.; Dunn, P.

    1994-09-01

    Analytic modeling of several heat exchanger concepts to couple the SP-100 nuclear reactor lithium loop and the Space Stirling Power Convertor (SSPC) was performed. Four 25 kWe SSPC`s are used to produce the required 100 kW of electrical power. This design work focused on the interface between a single SSPC and the primary lithium loop. Manifolding to separate and collect the four channel flow was not modeled. This work modeled two separate types of heat exchanger interfaces (conductive coupling and radiative coupling) to explore their relative advantages and disadvantages. The minimum mass design of the conductively coupled concepts was 18 kg or 0.73 kg/kWe for a single 25 kWe convertor. The minimum mass radiatively coupled concept was 41 kg or 1.64 kg/kWe. The direct conduction heat exchanger provides a lighter weight system because of its ability to operate the Stirling convertor evaporator at higher heat fluxes than those attainable by the radiatively coupled systems. Additionally the conductively coupled concepts had relatively small volumes and provide potentially simpler assembly. Their disadvantages were the tight tolerances and material joining problems associated with this refractory to superalloy interface. The advantages of the radiatively coupled designs were the minimal material interface problems.

  18. System 80+{trademark} Standard Design: CESSAR design certification. Volume 13

    SciTech Connect (OSTI)

    1997-12-31

    This report has been prepared in support of the industry effort to standardize nuclear plant designs. This document describes the Combustion Engineering, Inc. System 80+{trademark} Standard Design. This volume contains sections 2 thru 7 of Chapter 15 -- Accident Analyses. Topics covered are: decrease in heat removal by the secondary system; decrease in reactor coolant flow rate; reactivity and power distribution anomalies; increase in RCS inventory; decrease in RCS inventory; and radioactive material release from a system or component. Appendices 15A, 15B, and 15C are included.

  19. OPEC's maximum oil revenue will be $80 billion per year

    SciTech Connect (OSTI)

    Steffes, D.W.

    1986-01-01

    OPEC's income from oil is less than $80 billion this year, only one fourth its 1981 revenue. The optimum revenue OPEC can expect is 15 MBB/D at $15/barrel. Energy conservation will continue despite falling prices because consumers no longer feel secure that OPEC can deliver needed supplies. Eleven concepts which affect the future world economic outlook include dependence upon petroleum and petroleum products, the condition of capital markets, low energy and commodity prices, the growth in money supply without a corresponding growth in investment, and the high debt level of the US and the developing countries.

  20. Coulomb Excitation of the N = 50 nucleus {sup 80}Zn

    SciTech Connect (OSTI)

    Van de Walle, J.; Cocolios, T. E.; Huyse, M.; Ivanov, O.; Mayet, P.; Raabe, R.; Sawicka, M.; Stefanescu, I.; Duppen, P. van; Aksouh, F.; Behrens, T.; Gernhauser, R.; Kroell, T.; Kruecken, R.; Bildstein, V.; Blazhev, A.; Eberth, J.

    2008-05-12

    Neutron rich Zinc isotopes, including the N = 50 nucleus {sup 80}Zn, were produced and post-accelerated at the Radioactive Ion Beam (RIB) facility REX-ISOLDE (CERN). Low-energy Coulomb excitation was induced on these isotopes after post-acceleration, yielding B(E2) strengths to the first excited 2{sup +} states. For the first time, an excited state in {sup 80}Zn was observed and the 2{sub 1}{sup +} state in {sup 78}Zn was established. The measured B(E2,2{sub 1}{sup +}{yields}0{sub 1}{sup +}) values are compared to two sets of large scale shell model calculations. Both calculations reproduce the observed B(E2) systematics for the full Zinc isotopic chain. The results for N = 50 isotones indicate a good N = 50 shell closure and a strong Z = 28 proton core polarization. The new results serve as benchmarks to establish theoretical models, predicting the nuclear properties of the doubly magic nucleus {sup 78}Ni.

  1. Microsoft Word - HABAdv #236_100-N_RIFS.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Benton Blvd. Richland, WA 99354 Re: Integrated 100 Area Remedial InvestigationFeasibility Study Work Plan Addendum 5: 100-NR-1 and 100-NR-2 Operable Units (DOE...

  2. Low-lying isomeric state in {sup 80}Ga from the {beta}{sup -} decay of {sup 80}Zn

    SciTech Connect (OSTI)

    LicA, R.; Marginean, N.; Ghita, D.G.; and others

    2012-10-20

    A new level scheme was constructed for {sup 80}Ga which is significantly different from the one previously reported. The excitation energy of a new low-lying state recently reported in [2] was identified at 22.4 keV. Properties of the level scheme suggest that the ground state has spin J = 6 and the first excited state has spin J = 3. The spin assignments are in agreement with laser spectroscopy values previously measured. Our work provides the first evidence for the J = 6 being the ground state.

  3. MHK Technologies/Pulse Stream 100 | Open Energy Information

    Open Energy Info (EERE)

    database homepage Pulse Stream 100.jpg Technology Profile Primary Organization Pulse Tidal Ltd Project(s) where this technology is utilized *MHK ProjectsPulse Stream 100...

  4. Combined Heat and Power System Enables 100% Reliability at Leading...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Enables 100% Reliability at Leading Medical Campus - Case Study, 2013 Combined Heat and Power System Enables 100% Reliability at Leading Medical Campus - Case Study, 2013 Thermal ...

  5. Development of a 100-Watt High Temperature Thermoelectric Generator...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    a 100-Watt High Temperature Thermoelectric Generator Development of a 100-Watt High Temperature Thermoelectric Generator Test results for low and high temperature thermoelectric ...

  6. Obama Administration Announces Nearly $100 Million for Smart...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    100 Million for Smart Grid Workforce Training and Development Obama Administration Announces Nearly 100 Million for Smart Grid Workforce Training and Development April 8, 2010 - ...

  7. Kingston Creek Hydro Project Powers 100 Households | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Kingston Creek Hydro Project Powers 100 Households Kingston Creek Hydro Project Powers 100 Households August 21, 2013 - 12:00am Addthis Nevada-based contracting firm Nevada ...

  8. File:Calabarzon Speed 100m | Open Energy Information

    Open Energy Info (EERE)

    Calabarzon - Republic of the Philippines Wind Speed at 100 meters Sources National Renewable Energy Laboratory Authors Billy Roberts Related Technologies Wind, Wind 100m...

  9. Reliable Muddle: Transportation Scenarios for the 80% Greenhouse Gas Reduction Goal for 2050 (Presentation)

    SciTech Connect (OSTI)

    Melaina, M.; Webster, K.

    2009-10-28

    Presentation describing transportation scenarios for meeting the 2050 DOE goal of reducing greenhouse gases by 80%.

  10. La supraconductivité a 100 ans !

    ScienceCinema (OSTI)

    None

    2011-10-06

    Il y a 100 ans, le 8 avril 1911, une découverte majeure était réalisée : celle de la supraconductivité. La supraconductivité est la caractéristique qu?ont certains métaux et alliages de perdre toute résistance électrique en dessous d?une température donnée. Cette renversante découverte, réalisée de manière presque fortuite par Kammerlingh Onnes de l?Université de Leyde (Pays-Bas) et son étudiant Gilles Holst, a ouvert un nouveau champ de recherche en physique et de fabuleuses perspectives d?applications technologiques. Du point de vue scientifique, la supraconductivité est en effet l?une des rares manifestations de la physique quantique à l?échelle macroscopique.  Du point de vue des retombées techniques, elle est porteuse d?applications majeures dans le domaine de la santé, des communications et de l?énergie. 100 ans après, les physiciens n?ont toujours pas fini d?explorer ce phénomène et ses applications. Le CERN abrite des applications de la supraconductivité à des échelles inédites. L?accélérateur de particules LHC, avec ses milliers d?aimants supraconducteurs répartis sur 27 kilomètres de circonférence, est en effet la plus grande application mondiale de la supraconductivité. Il ne pourrait exister sans elle.  Le CERN fête donc la découverte de la supraconductivité avec une conférence exceptionnelle donnée par Philippe Lebrun. Au cours de cette conférence, l?expérience historique de Kammerlingh Onnes sera reproduite. Philippe Lebrun racontera l?histoire de cette étonnante découverte, en la replaçant dans le contexte scientifique de l?époque. Il racontera les développements scientifiques et les applications du premier siècle de la supraconductivité. Conférence en français Merci de bien vouloir vous inscrire au : +41 22 767 76 76 ou cern.reception@cern.ch

  11. CENTIMETER CONTINUUM OBSERVATIONS OF THE NORTHERN HEAD OF THE HH 80/81/80N JET: REVISING THE ACTUAL DIMENSIONS OF A PARSEC-SCALE JET

    SciTech Connect (OSTI)

    Masque, Josep M.; Estalella, Robert; Girart, Josep M.; Rodriguez, Luis F.; Beltran, Maria T.

    2012-10-10

    We present 6 and 20 cm Jansky Very Large Array/Very Large Array observations of the northern head of the HH 80/81/80N jet, one of the largest collimated jet systems known so far, aimed to look for knots farther than HH 80N, the northern head of the jet. Aligned with the jet and 10' northeast of HH 80N, we found a radio source not reported before, with a negative spectral index similar to that of HH 80, HH 81, and HH 80N. The fit of a precessing jet model to the knots of the HH 80/81/80N jet, including the new source, shows that the position of this source is close to the jet path resulting from the modeling. If the new source belongs to the HH 80/81/80N jet, its derived size and dynamical age are 18.4 pc and >9 Multiplication-Sign 10{sup 3} yr, respectively. If the jet is symmetric, its southern lobe would expand beyond the cloud edge resulting in an asymmetric appearance of the jet. Based on the updated dynamical age, we speculate on the possibility that the HH 80/81/80N jet triggered the star formation observed in a dense core found ahead of HH 80N, which shows signposts of interaction with the jet. These results indicate that parsec-scale radio jets can play a role in the stability of dense clumps and the regulation of star formation in the molecular cloud.

  12. Measurement of Neutron and Muon Fluxes 100~m Underground with the SciBath Detector

    SciTech Connect (OSTI)

    Garrison, Lance

    2014-01-01

    The SciBath detector is an 80 liter liquid scintillator detector read out by a three dimensional grid of 768 wavelength-shifting fibers. Initially conceived as a fine-grained charged particle detector for neutrino studies that could image charged particle tracks in all directions, it is also sensitive to fast neutrons (15-200 MeV). In fall of 2011 the apparatus performed a three month run to measure cosmic-induced muons and neutrons 100~meters underground in the FNAL MINOS near-detector area. Data from this run has been analyzed and resulted in measurements of the cosmic muon flux as \

  13. Advanced Fast Reactor - 100 (AFR-100) Report for the Technical Review Panel

    SciTech Connect (OSTI)

    Grandy, Christopher; Sienicki, James J.; Moisseytsev, Anton; Krajtl, Lubomir; Farmer, Mitchell T.; Kim, Taek K.; Middleton, B.

    2014-06-04

    This report is written to provide an overview of the Advanced Fast Reactor-100 in the requested format for a DOE technical review panel. This report was prepared with information that is responsive to the DOE Request for Information, DE-SOL-0003674 Advanced Reactor Concepts, dated February 27, 2012 from DOE’s Office of Nuclear Energy, Office of Nuclear Reactor Technologies. The document consists of two main sections. The first section is a summary of the AFR-100 design including the innovations that are incorporated into the design. The second section contains a series of tables that respond to the various questions requested of the reactor design team from the subject DOE RFI.

  14. Crop production with conservation in the 80's

    SciTech Connect (OSTI)

    Not Available

    1981-01-01

    Crop production with conservation of the resources used is needed now and will continue to be needed in the future. The need for energy conservation has received emphasis since the oil embargo of 1973-74 and evidently the emphasis will continue for the foreseeable future. Soil conservation is a continuing goal. The task is to reduce soil-erosion losses due to wind and water in order to prevent loss of soil productivity permanently and to provide improved water quality. In many states soil conservation has become a public goal arrived at through public input in the decision-making process. The goal of this Conference on Crop Production with Conservation in the 80's was to explore and make available current research, thoughts, and trends on resource conservation in conjunction with crop production. The Conference was held at The Palmer House in Chicago on December 1 and 2, 1980. This conference report consists of 29 papers. 415 references, 47 figures, 106 tables.

  15. Design status of the US 100 tesla non-destructive magnet system

    SciTech Connect (OSTI)

    Schneider-Muntau, H.; Eyssa, Y.; Pernambuco-Wise, P.; Boenig, H.; Campbell, L.J.; Eberl, K.R.; Parkin, D.M.; Schillig, J.; Sims, J.

    1996-09-01

    A collaborative effort is now underway in the US between the Department of Energy and the National Science Foundation to design, build, and use a 100 T non-destructive magnet for studying the properties of materials at high fields. The National High Magnetic Field Laboratory (NHMFL) at Tallahassee, Florida, and Los Alamos, New Mexico, where the magnet will be sited, is carrying out this task. This magnet will join other pulsed magnets at NHMFL, to provide magnetic fields at strengths, time durations, and volumes that are longer (in combination) than any now available. In particular, the goal for the 100 T magnet is a time duration above 80 T of about 15 ms in a cold bore of 24 mm. The present status of the design effort and various design issues are presented here.

  16. Sandia California works on nuclear weapon W80-4 Life Extension...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Apply for Our Jobs Our Jobs Working at NNSA Blog Home NNSA Blog Sandia California works on nuclear weapon W80-4 ... Sandia California works on nuclear weapon W80-4 Life ...

  17. IESNA LM-80-08 - An Overview of the Test Procedure and How it...

    Energy Savers [EERE]

    IESNA LM-80-08 - An Overview of the Test Procedure and How it is Used for ENERGY STAR IESNA LM-80-08 - An Overview of the Test Procedure and How it is Used for ENERGY STAR This ...

  18. File:NREL-ca-80m.pdf | Open Energy Information

    Open Energy Info (EERE)

    File Edit with form History File:NREL-ca-80m.pdf Jump to: navigation, search File File history File usage California Annual Average Wind Speed at 80 Meters Size of this preview:...

  19. File:NREL-al-80m.pdf | Open Energy Information

    Open Energy Info (EERE)

    File Edit with form History File:NREL-al-80m.pdf Jump to: navigation, search File File history File usage Alabama Annual Average Wind Speed at 80 Meters (PDF) Size of this preview:...

  20. File:NREL-az-80m.pdf | Open Energy Information

    Open Energy Info (EERE)

    NREL-az-80m.pdf Jump to: navigation, search File File history File usage Arizona Annual Average Wind Speed at 80 Meters Size of this preview: 463 599 pixels. Other resolution:...

  1. File:NREL-ar-80m.pdf | Open Energy Information

    Open Energy Info (EERE)

    File Edit with form History File:NREL-ar-80m.pdf Jump to: navigation, search File File history File usage Arkansas Annual Average Wind Speed at 80 Meters Size of this preview: 463...

  2. Berkeley Lab: 80 Years of Excellence in Science | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lab: 80 Years of Excellence in Science Berkeley Lab: 80 Years of Excellence in Science September 2, 2011 - 11:45am Addthis Berkeley Lab: 80 Years of Excellence in Science Kate Bannan Communications and Outreach Specialist Congratulations to Lawrence Berkeley National Laboratory, which celebrated its 80th anniversary on August 26. Berkeley Lab was founded in 1931 by Ernest Orlando Lawrence, a University of California Berkeley physicist who won the 1939 Nobel Prize in physics for his invention of

  3. NREL: Awards and Honors - R&D 100 Awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Printable Version R&D 100 Awards Since its inception as the Solar Energy Research Institute (SERI) in 1977, NRELSERI has won 57 R&D 100 awards. 2014 Direct Monocrystalline Silicon...

  4. Sandia Energy - Sandia Wins Three R&D100 Awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Events Concentrating Solar Power Photovoltaic Solar National Solar Thermal Test Facility Solar Newsletter Sandia Wins Three R&D100 Awards Previous Next Sandia Wins Three R&D100...

  5. Sandia's Energy & Climate Program wins R&D 100 awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Sandia's Energy & Climate Program wins R&D 100 awards The annual R&D 100 Awards, also ... new high voltage switch Rising global energy usage has placed unprecedented demands on an ...

  6. "GRID 2030" A NATIONAL VISION FOR ELECTRICITY'S SECOND 100 YEARS...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    "GRID 2030" A NATIONAL VISION FOR ELECTRICITY'S SECOND 100 YEARS "GRID 2030" A NATIONAL VISION FOR ELECTRICITY'S SECOND 100 YEARS The purpose of this document is to describe the ...

  7. Sandia National Laboratories: 100 Resilient Cities: Sandia Challenge; About

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    100 Resilient Cities - Sandia Challenge Facebook Twitter YouTube Flickr RSS Top 100 Resilient Cities - Sandia Challenge About Energy Risk Analysis Water Waste Medical Transportation Food Emergency Response Economy Psychological / Cognitive Effects News - 100 Resilient Cities 100 Resilient Cities - Sandia Challenge About Sandia National Laboratories is a non-profit organization recognized as a global leader in modeling and analysis for resilient systems and societies. In support of Rockefeller's

  8. DOE Awards $100 Million for Energy Research | Photosynthetic Antenna

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Center DOE Awards $100 Million for Energy Research July 8, 2014 DOE Awards $100 Million for Energy Research PARC is renewed under DOE awards for 4 more years http://energy.gov/articles/doe-awards-100-million-innovative-energy-research In the News News/Media

  9. Top 100 Oil and Gas Fields of 2009

    U.S. Energy Information Administration (EIA) Indexed Site

    Top 100 Oil and Gas Fields of 2009 Introduction This supplement to the Energy Information Administration's summary of U.S. Crude Oil, Natural Gas, and Natural Gas Liquids Proved Reserves, 2009 ranks the United States' largest oil and gas fields by their estimated 2009 proved reserves. The Top 100's Share of U.S. Proved Reserves in 2009 The Top 100 oil fields and Top 100 gas fields each accounted for about 60 percent of the respective total proved reserves of the United States. The Top 100 oil

  10. Reverse Monte Carlo simulation of Se{sub 80}Te{sub 20} and Se{sub 80}Te{sub 15}Sb{sub 5} glasses

    SciTech Connect (OSTI)

    Abdel-Baset, A. M.; Rashad, M.; Moharram, A. H.

    2013-12-16

    Two-dimensional Monte Carlo of the total pair distribution functions g(r) is determined for Se{sub 80}Te{sub 20} and Se{sub 80}Te{sub 15}Sb{sub 5} alloys, and then it used to assemble the three-dimensional atomic configurations using the reverse Monte Carlo simulation. The partial pair distribution functions g{sub ij}(r) indicate that the basic structure unit in the Se{sub 80}Te{sub 15}Sb{sub 5} glass is di-antimony tri-selenide units connected together through Se-Se and Se-Te chain. The structure of Se{sub 80}Te{sub 20} alloys is a chain of Se-Te and Se-Se in addition to some rings of Se atoms.

  11. Gas production and behavior in the coolant of the SP-100 Space Nuclear Power System

    SciTech Connect (OSTI)

    McGhee, J.M.

    1989-08-01

    The radiologic generation and subsequent behavior of helium gas in the lithium coolant of SP-100 class space nuclear power reactors was investigated analytically in a two part study. Part One of the study consisted of a calculation of coolant radiologic helium gas production rates in a SP-100 class reactor using the discrete ordinates code TWODANT. Cross sections were developed from ENDF/B-V data via the MATXS6s master cross section library. Cross sections were self shielded assuming one homogeneous core region, and doppler broadened to 1300 K using the cross section preparation code TRANSX. Calculations were performed using an S{sub 4}/P{sub 1} approximation and 80 neutron energy groups. Part Two of the study consisted of a theoretical investigation into the behavior of helium gas in the primary loop of lithium cooled space reactors. The SP-100 space power system was used as a representative of such a system. Topics investigated included: (1) heterogeneous and homogeneous nucleation; (2) bubble growth/collapse by diffusion, mechanical temperature/pressure effects, and coalescence; and, (3) the effects on bubble distribution of microgravity, magnetic fields, and inertially induced buoyancy. 104 refs., 78 figs., 28 tabs.

  12. 100 supercomputers later, Los Alamos high-performance computing still

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    supports national security mission 100 supercomputers later Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:September 2015 all issues All Issues » submit 100 supercomputers later, Los Alamos high-performance computing still supports national security mission Los Alamos National Laboratory has deployed 100 supercomputers in the last 60 years January 1, 2015 1952 MANIAC-I supercomputer 1952 MANIAC-I supercomputer Contact Linda Anderman Email From the 1952

  13. Sandia National Laboratories: Research: R&D 100 Awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research R&D 100 Awards R&D Magazine honors inventors by identifying the 100 most technologically significant products and advancements each year and recognizing the winning innovators and their organizations. Winners are chosen from an international pool of submissions from universities, private corporations, and government labs. In 2015, Sandia researchers and their collaborators earned five R&D 100 Awards. Since 1976, Sandia has earned 109 of these coveted awards - often referred

  14. Obama Administration Announces Nearly $100 Million for Smart Grid Workforce

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Training and Development | Department of Energy 100 Million for Smart Grid Workforce Training and Development Obama Administration Announces Nearly $100 Million for Smart Grid Workforce Training and Development April 8, 2010 - 12:00am Addthis ROCKVILLE, MD -U.S. Secretary of Energy Steven Chu announced today that the Department of Energy is announcing award selections for nearly $100 million for 54 smart grid workforce training programs that will help prepare the next generation of workers

  15. Microsoft Word - N01673_B100 AA final draft

    Office of Legacy Management (LM)

    Draft Building 100 Area Plume Management Alternatives Analysis March 2012 LMS/PIN/N01673 This page intentionally left blank LMS/PIN/N01673 Pinellas County, Florida, Site Environmental Restoration Project Draft Building 100 Area Plume Management Alternatives Analysis March 2012 This page intentionally left blank U.S. Department of Energy Draft Building 100 Area Plume Management Alternatives Analysis March 2012 Doc. No. N01673 Page i Contents Abbreviations

  16. Microsoft Word - N01747_Bldg 100 SAR.doc

    Office of Legacy Management (LM)

    Building 100 Area Site Assessment Report August 2012 LMS/PIN/N01747 This page intentionally left blank LMS/PIN/N01747 Pinellas County, Florida, Site Building 100 Area Site Assessment Report August 2012 This page intentionally left blank U.S. Department of Energy Building 100 Area Site Assessment Report August 2012 Doc. No. N01747 Page i Contents Abbreviations ................................................................................................................................. iii 1.0

  17. EIS-0265-SA-100: Supplement Analysis | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0: Supplement Analysis EIS-0265-SA-100: Supplement Analysis Oregon Fish Screening Project, Screen Replacements PDF icon Supplement Analysis for the Watershed Management Program...

  18. Luminosity goals for a 100-TeV pp collider

    SciTech Connect (OSTI)

    Hinchliffe, Ian; Kotwal, Ashutosh; Mangano, Michelangelo L.; Quigg, Chris; Wang, Lian-Tao

    2015-04-23

    We consider diverse examples of science goals that provide a framework to assess luminosity goals for a future 100-TeV proton-proton collider.

  19. OAR - Division 100-Wildlife Diversity Plan | Open Energy Information

    Open Energy Info (EERE)

    availability: http:crossref.org Citation Retrieved from "http:en.openei.orgwindex.php?titleOAR-Division100-WildlifeDiversityPlan&oldid792434" Feedback Contact...

  20. MHK Projects/Pulse Stream 100 Demonstration Project | Open Energy...

    Open Energy Info (EERE)

    Efforts See Tethys << Return to the MHK database homepage Retrieved from "http:en.openei.orgwindex.php?titleMHKProjectsPulseStream100DemonstrationProject&oldid679581...

  1. Four of Popular Science's 100 best innovations from Los Alamos...

    National Nuclear Security Administration (NNSA)

    Four of Popular Science's 100 best innovations from Los Alamos, Sandia, Livermore | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission...

  2. Luminosity goals for a 100-TeV pp collider

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hinchliffe, Ian; Kotwal, Ashutosh; Mangano, Michelangelo L.; Quigg, Chris; Wang, Lian-Tao

    2015-08-20

    We consider diverse examples of science goals that provide a framework to assess luminosity goals for a future 100-TeV proton-proton collider.

  3. Reaching 100% Renewable Energy, City of Aspen (Fact Sheet), NREL...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    REACHING 100% RENEWABLE ENERGY City of Aspen and the National Renewable Energy Laboratory develop and implement a strategy to cost-effectively reach a ground- breaking goal In...

  4. MCA 77-4-100 Geothermal Resources | Open Energy Information

    Open Energy Info (EERE)

    MCA 77-4-100 Geothermal ResourcesLegal Abstract Montana statute governing the administration of geothermal resources on state lands Published NA Year Signed or Took Effect...

  5. DOE to Award $100 Million for Energy Frontier Research Centers...

    Office of Science (SC) Website

    to Award 100 Million for Energy Frontier Research Centers Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events EFRC News EFRC ...

  6. DOE Delivers Over $80 Million in Weatherization Funding to First Four

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    States | Department of Energy Over $80 Million in Weatherization Funding to First Four States DOE Delivers Over $80 Million in Weatherization Funding to First Four States June 8, 2009 - 12:00am Addthis WASHINGTON, DC - U.S. Department of Energy Secretary Steven Chu today announced the transfer of nearly $80 million in funding from the American Recovery and Reinvestment Act to Arizona, Kansas, Mississippi, and Oregon to expand state weatherization assistance programs. After submitting their

  7. DOE Announces $80 Million in Funding to Increase SuperTruck Efficiency |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Announces $80 Million in Funding to Increase SuperTruck Efficiency DOE Announces $80 Million in Funding to Increase SuperTruck Efficiency March 1, 2016 - 2:59pm Addthis News release from the Department of Energy WASHINGTON - Building on the notable successes of the SuperTruck initiative, Deputy Assistant Secretary for Transportation Reuben Sarkar today announced SuperTruck II, an $80 million funding opportunity, subject to congressional appropriations, for research,

  8. PP-80-1 Vermont Electric Cooperative, Inc. | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Vermont Electric Cooperative, Inc to construct, operate and maintain electric transmission facilities at the U.S. - Canada Border PDF icon PP-80-1 Vermont Electric Cooperative, ...

  9. WRAP 1, operational test report 80X non-destructive examination system

    SciTech Connect (OSTI)

    Bottenus, R.J.

    1997-04-14

    This Operational Test Report was performed to verify the WRAP 1 Facility 80X Non-Destructive Examination systems operate in accordance with the system designs and specifications.

  10. 100-K Target Analyte List Development for Soil

    SciTech Connect (OSTI)

    Ovink, R.

    2012-09-18

    This report documents the process used to identify source area target analytes in support of the 100-K Area remedial investigation/feasibility study (RI/FS) addendum to the Integrated 100 Area Remedial Investigation/Feasibility Study Work Plan (DOE/RL-2008-46, Rev. 0).

  11. 100-B/C Target Analyte List Development for Soil

    SciTech Connect (OSTI)

    R.W. Ovink

    2010-03-18

    This report documents the process used to identify source area target analytes in support of the 100-B/C remedial investigation/feasibility study addendum to DOE/RL-2008-46. This report also establishes the analyte exclusion criteria applicable for 100-B/C use and the analytical methods needed to analyze the target analytes.

  12. Operating experience with 100% pellet burden on Amanda blast furnace

    SciTech Connect (OSTI)

    Keaton, D.E.; Minakawa, T. . Ironmaking Dept.)

    1993-01-01

    A number of significant changes in operations at the Ashland Works of the Armco Steel Company occurred in 1992 which directly impacted the Amanda Blast Furnace operation. These changes included the shutdown of the hot strip mill which resulted in coke oven gas enrichment of the Amanda stoves and an increase of 75 C in hot blast temperature, transition to 100% continuous cast operation which resulted in increased variation of the hot metal demand, and the July idling of the sinter plant. Historically, the Amanda Blast Furnace burden was 30% fluxed sinter and 70% acid pellet. It was anticipated that the change to 100% pellet burden would require changes in charging practice and alter furnace performance. The paper gives a general furnace description and then describes the burden characteristics, operating practice with 30% sinter/70% acid pellet burden, preparations for the 100% acid pellet burden operation, the 100% acid pellet operation, and the 100% fluxed pellet burden operation.

  13. The SNL100-02 blade : advanced core material design studies for the Sandia 100-meter blade.

    SciTech Connect (OSTI)

    Griffith, Daniel

    2013-11-01

    A series of design studies are performed to investigate the effects of advanced core materials and a new core material strategy on blade weight and performance for large blades using the Sandia 100-meter blade designs as a starting point. The initial core material design studies were based on the SNL100-01 100- meter carbon spar design. Advanced core material with improved performance to weight was investigated with the goal to reduce core material content in the design and reduce blade weight. A secondary element of the core study was to evaluate the suitability of core materials from natural, regrowable sources such as balsa and recyclable foam materials. The new core strategy for the SNL100-02 design resulted in a design mass of 59 tons, which is a 20% reduction from the most recent SNL100-01 carbon spar design and over 48% reduction from the initial SNL100-00 all-glass baseline blade. This document provides a description of the final SNL100-02 design, includes a description of the major design modifications, and summarizes the pertinent blade design information. This document is also intended to be a companion document to the distribution of the NuMAD blade model files for SNL100-02 that are made publicly available.

  14. NERSC Now Connecting All Science at 100Gbps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Now Connecting All Science at 100Gbps NERSC Now Connecting All Science at 100Gbps October 17, 2013 Contact: Linda Vu, +1 510 495 2402, lvu@lbl.gov All network traffic flowing in-and-out of the Department of Energy's National Energy Research Scientific Computing Center (NERSC) is now moving at 100 Gigabits per second (Gbps)-this includes everything from email to massive scientific datasets. At this speed, 1.8 million people could simultaneously download an eBook in about two minutes. The impetus

  15. 100-D/H Remedial Investigation/ Feasibility Study /Proposed Plan

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Remedial Investigation/ Feasibility Study /Proposed Plan Nina Menard Washington State Department of Ecology 100-D/H RI/FS/PP * Received Draft RI/FS/PP on December 14, 2012 * Submitted comments to DOE on March 12, 2013 * DOE and Ecology are meeting to start the resolution process 100-D/H RI/FS/PP * Good points o Fairly well written o Results of borehole data didn't find any smoking guns. 100-D/H RI/FS/PP Issues o Selection of Contaminants Of Concern/Contaminants Of Potential Concern (COC/COPC) o

  16. Microsoft Word - N01535_B100 Plume Delin Rpt

    Office of Legacy Management (LM)

    Building 100 Off-Site Plume Delineation South of Bryan Dairy Road Data Report for Rally Stores Property November 2010 LMS/PIN/N01535 This page intentionally left blank LMS/PIN/N01535 Pinellas Environmental Restoration Project Building 100 Area Off-Site Plume Delineation South of Bryan Dairy Road Data Report for Rally Stores Property November 2010 This page intentionally left blank U.S. Department of Energy Building 100 Area Off-Site Plume Delineation South of Bryan Dairy Road November 2010 Doc.

  17. R&D 100 Awards Honor NREL Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    R&D 100 Awards Honor NREL Research For more information contact: George Douglas 303-275-4096 e-mail: George Douglas Golden, Colo., Sept. 21, 1999 — Researchers at the U.S. Department of Energy's National Renewable Energy Laboratory will be honored Thursday with two R&D 100 awards. The awards are given each year by the editors of R&D Magazine for what they consider to be among the year's 100 most significant innovations. For 1999, the magazine identified NREL's Advanced

  18. R&D100 Winners * Impacts on Global Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    R&D finalists Friday, September 25, 2015 - 7:54am R&D Magazine named 18 NNSA lab projects as finalists for the 53rd annual R&D 100 Awards, which honor the 100 most innovative technologies and services of the past year. Finalists were selected by an independent panel of more than 70 judges. This year's Finalists represent many of industry's leading organizations and national laboratories, as well as many newcomers to the R&D 100 Awards, often referred to as the "Oscars of

  19. Former Worker Program Reaches 100,000 Screening Milestone

    Broader source: Energy.gov [DOE]

    A major milestone was reached in June of this year – over 100,000 exams have now been provided to former workers since the inception of the program. Since 1996, the program has made great strides...

  20. Hanford Site - 100-HR-3-H | Department of Energy

    Office of Environmental Management (EM)

    H Hanford Site - 100-HR-3-H July 1, 2014 - 12:00pm Addthis US Department of Energy Groundwater Database Groundwater Master Report InstallationName, State: Hanford Site, WA ...

  1. R746-100-10(A) | Open Energy Information

    Open Energy Info (EERE)

    RegulationRegulation: R746-100-10(A)Legal Abstract Practices and proceedures of the Public Service Commission--Hearing proceedures. Published NA Year Signed or Took Effect...

  2. R&D 100: Lab Researchers Contribute to Public Safety

    Broader source: Energy.gov [DOE]

    Scientists at two Energy Department Labs and the Y-12 National Security Complex received R&D 100 awards -- also known as the "Oscars of innovation" -- for technologies that advance national security and public safety.

  3. Three Argonne scientists combine for 100 years of combustion...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Three Argonne scientists combine for 100 years of combustion research By Robyn Henderson * ... and it's mainly because of how much better computers have become in the last 35 years." ...

  4. S M Stoller Star Center-B100

    Office of Legacy Management (LM)

    1906 Technical Report for S M Stoller Star Center-B100 110406202 7031-877 Accutest Job Number: F41217 Sampling Date: 060206 Report to: US Dept of Energy, Grand Jct Office 2597 ...

  5. Results of the 2007 B100 Quality Survey

    SciTech Connect (OSTI)

    Alleman, T. L.; McCormick, R. L.

    2008-03-01

    In a 2007 analysis of samples from 52% of U.S. biodiesel (B100) producers, 90% met ASTM and other specifications for critical engine performance properties and for elements that harm emission controls.

  6. Transcending Portland Cement with 100 percent fly ash concrete

    SciTech Connect (OSTI)

    Cross, D.; Akin, M.; Stephens, J.; Cuelh, E.

    2009-07-01

    The use of concrete, made with 100% fly ash and no Portland cement, in buildings at the Transportation Institute in Bozeman, MT, USA, is described. 3 refs., 7 figs.

  7. R&D 100 Awards Honor NREL Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL's other R&D 100 award came for the lab's part in the development of Siemens Solar ... In tests conducted at NREL, the Siemens Solar modules demonstrated efficiencies of more ...

  8. 10.0 COMMUNITY RELATIONS/PUBLIC INVOLVEMENT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0-1 10.0 COMMUNITY RELATIONSPUBLIC INVOLVEMENT 10.1 INTRODUCTION This section describes, in general, the way in which the public will be involved with the implementation of this...

  9. Picture of the Week: The 100-Ton Test

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 The 100-Ton Test Before the historic Trinity test on July 16th, 1945, Los Alamos scientists conducted a host of other experiments designed to ensure that they would be ready to...

  10. Fueling Innovation -- 100 MPGe at a Time | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Innovation -- 100 MPGe at a Time Fueling Innovation -- 100 MPGe at a Time August 4, 2010 - 2:48pm Addthis X Prize contenders take part in on-track testing at Michigan International Speedway | Courtesy of Progressive Automotive X Prize X Prize contenders take part in on-track testing at Michigan International Speedway | Courtesy of Progressive Automotive X Prize John Schueler John Schueler Former New Media Specialist, Office of Public Affairs What does this project do? Develops the next

  11. A National Vision for Electricity's Second 100 Years | Department of

    Energy Savers [EERE]

    Energy A National Vision for Electricity's Second 100 Years A National Vision for Electricity's Second 100 Years The purpose of this document is to describe the common vision articulated at the National Electric System Vision meeting. The U.S. Department of Energy will use this vision to help implement President Bush's call for "...modernizing America's electric delivery system" and the 51 recommendations contained in the National Transmission Grid Study. Various stakeholders,

  12. 100 supercomputers later, Los Alamos high-performance computing still

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    supports national security mission High-performance computing supports national security 100 supercomputers later, Los Alamos high-performance computing still supports national security mission Los Alamos National Laboratory has deployed 100 supercomputers in the last 60 years. November 12, 2014 1952 MANIAC-I supercomputer 1952 MANIAC-I supercomputer Contact Nancy Ambrosiano Communications Office (505) 667-0471 Email "Computing power for our Laboratory's national security mission is a

  13. Hanford Site - 100-BC-5 | Department of Energy

    Office of Environmental Management (EM)

    BC-5 Hanford Site - 100-BC-5 July 1, 2014 - 12:00pm Addthis US Department of Energy Groundwater Database Groundwater Master Report InstallationName, State: Hanford Site Responsible DOE Office: Office of Environmental Management Plume Name: 100-BC-5 Remediation Contractor: CHPRC PBS Number: 30 Report Last Updated: July 2014 with CY2013 data Contaminants Halogenated VOCs/SVOCs Present?: Yes VOC Name Concentration (ppb) Regulatory Driver Cleanup Requirement TCE 2.8 No Metal Name Metal Concentration

  14. Hanford Site - 100-FR-3 | Department of Energy

    Office of Environmental Management (EM)

    FR-3 Hanford Site - 100-FR-3 July 1, 2014 - 12:00pm Addthis US Department of Energy Groundwater Database Groundwater Master Report InstallationName, State: Hanford Site, WA Responsible DOE Office: Office of Environmental Management Plume Name: 100-FR-3 Remediation Contractor: CHPRC PBS Number: 30 Report Last Updated: July 2014 with CY2013 data Contaminants Halogenated VOCs/SVOCs Present?: Yes VOC Name Concentration (ppb) Regulatory Driver Cleanup Requirement TCS 15 Yes 5 (DWS) Fuel Present? No

  15. Hanford Site - 100-HR-3-D | Department of Energy

    Office of Environmental Management (EM)

    D Hanford Site - 100-HR-3-D July 1, 2014 - 12:00pm Addthis US Department of Energy Groundwater Database Groundwater Master Report InstallationName, State: Hanford Site, WA Responsible DOE Office: Office of Environmental Management Plume Name: 100-HR-3-D Remediation Contractor: CHPRC PBS Number: 30 Report Last Updated: July 2014 with CY2013 data Contaminants Halogenated VOCs/SVOCs Present?: No Fuel Present? No Metals Present? Yes Isotopes Present? Yes Explosives Present? No Other Contaminants? No

  16. Hanford Site - 100-KR-4 | Department of Energy

    Office of Environmental Management (EM)

    KR-4 Hanford Site - 100-KR-4 July 1, 2014 - 12:00pm Addthis US Department of Energy Groundwater Database Groundwater Master Report InstallationName, State: Hanford Site, WA Responsible DOE Office: Office of Environmental Management Plume Name: 100-KR-4 Remediation Contractor: CHPRC PBS Number: 30 Report Last Updated: July 2014 with CY2013 data Contaminants Halogenated VOCs/SVOCs Present?: Yes VOC Name Concentration (ppb) Regulatory Driver Cleanup Requirement TCE 8.3 Yes 5 (DWS) Fuel Present? No

  17. Hanford Site - 100-NR-2 | Department of Energy

    Office of Environmental Management (EM)

    NR-2 Hanford Site - 100-NR-2 July 1, 2014 - 12:00pm Addthis US Department of Energy Groundwater Database Groundwater Master Report InstallationName, State: Hanford Site, WA Responsible DOE Office: Office of Environmental Management Plume Name: 100-NR-2 Remediation Contractor: CHPRC PBS Number: 30 Report Last Updated: July 2014 with CY2013 data Contaminants Halogenated VOCs/SVOCs Present?: No Fuel Present? Yes Metals Present? Yes Isotopes Present? Yes Explosives Present? No Other Contaminants? No

  18. NNSA Conducts 100th WMD Counterterrorism Exercise | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration Conducts 100th WMD Counterterrorism Exercise August 09, 2012 WASHINGTON, D.C. - NNSA's Offices of Counterterrorism Policy and Cooperation and Global Threat Reduction and the FBI today announced the completion of the Bearcat Thunder counterterrorism table-top exercise at the University of Cincinnati (UC), the 100th exercise of its kind. The exercise is part of NNSA's Silent Thunder table-top series, which is aimed at giving federal, state and local officials, first

  19. Better Buildings Neighborhood Initiative Upgrades 100,000 Buildings, Saves

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    $730 Million on Energy Bills | Department of Energy Neighborhood Initiative Upgrades 100,000 Buildings, Saves $730 Million on Energy Bills Better Buildings Neighborhood Initiative Upgrades 100,000 Buildings, Saves $730 Million on Energy Bills May 21, 2014 - 4:06pm Addthis NEWS MEDIA CONTACT (202) 586-4940 Building on President Obama's Climate Action Plan and the Administration's Better Buildings Initiative, the Energy Department announced today that the Department's Better Buildings

  20. w80

    National Nuclear Security Administration (NNSA)

    the results of thermal analysis. From the top center, counterclockwise, are Ryan Johnson, Bryn Miyahara, Alvin Leung and Matt H. Jones.

    Sandia National...

  1. Section 80

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    will be allowed. The Colville Village site was accessible via bush plane from the major airport at Prudhoe Bay, Alaska. Alaska Airlines provides good daily service to Prudhoe...

  2. Section 80

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ' 1 R 2 m E 0 (8)T 8,µ 0 d8 T(8,µ 0 ) ' T Rayleigh (8,µ 0 )T gas (8,µ 0 )T aerosol (8,µ 0 ), ' exp & mJ 8 Rayleigh % mJ 8 gas % mJ 8 aerosol E 0 (8) T(8,µ 0 ) 2 0 m ' 1 / µ o ' 1 / cos 2 0 J i Session Papers 351 (1) (2) Prediction and Measurement of Direct-Normal Solar Irradiance: A Closure Experiment R. N. Halthore and S. E. Schwartz Brookhaven National Laboratory Upton, New York J. J. Michalsky State University of New York at Albany, New York G. P. Anderson Hanscomb Air Force Base,

  3. Materials characterization activities for %E2%80%9CTake Our Sons&Daughters to Work Day%E2%80%9D 2013.

    SciTech Connect (OSTI)

    Mowry, Curtis Dale; Pimentel, Adam S.; Sparks, Elizabeth Schares; Hanlon, Brittany Paula

    2013-09-01

    We created interactive demonstration activities for Take Our Daughters&Sons to Work Day (TODSTWD) 2013 in order to promote general interest in chemistry and also generate awareness of the type of work our laboratories can perform. %E2%80%9CCurious about Mars Rover Curiosity?%E2%80%9D performed an elemental analysis on rocks brought to our lab using the same technique utilized on the planet Mars by the NASA robotic explorer Curiosity. %E2%80%9CFood is Chemistry?%E2%80%9D utilized a mass spectrometer to measure, in seconds, each participant's breath in order to identify the food item consumed for the activity. A total of over 130 children participated in these activities over a 3 hour block, and feedback was positive. This document reports the materials (including handouts), experimental procedures, and lessons learned so that future demonstrations can benefit from the baseline work performed. We also present example results used to prepare the Food activity and example results collected during the Curiosity demo.

  4. DOE Announces Solicitation for $8.0 Billion in Loan Guarantees | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Solicitation for $8.0 Billion in Loan Guarantees DOE Announces Solicitation for $8.0 Billion in Loan Guarantees September 22, 2008 - 3:43pm Addthis Third Round of Solicitations Targets Innovative Clean Coal Technologies WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced a solicitation for up to $8.0 billion in federal loan guarantees for projects that employ advanced technologies that avoid, reduce or sequester emissions of air pollutants or greenhouse gases in

  5. The SNL100-03 Blade: Design Studies with Flatback Airfoils for the Sandia 100-meter Blade.

    SciTech Connect (OSTI)

    Griffith, Daniel; Richards, Phillip William

    2014-09-01

    A series of design studies were performed to inv estigate the effects of flatback airfoils on blade performance and weight for large blades using the Sandi a 100-meter blade designs as a starting point. As part of the study, the effects of varying the blade slenderness on blade structural performance was investigated. The advantages and disadvantages of blad e slenderness with respect to tip deflection, flap- wise & edge-wise fatigue resistance, panel buckling capacity, flutter speed, manufacturing labor content, blade total weight, and aerodynamic design load magn itude are quantified. Following these design studies, a final blade design (SNL100-03) was prod uced, which was based on a highly slender design using flatback airfoils. The SNL100-03 design with flatback airfoils has weight of 49 tons, which is about 16% decrease from its SNL100-02 predecessor that used conventional sharp trailing edge airfoils. Although not systematically optimized, the SNL100 -03 design study provides an assessment of and insight into the benefits of flatback airfoils for la rge blades as well as insights into the limits or negative consequences of high blade slenderness resulting from a highly slender SNL100-03 planform as was chosen in the final design definition. This docum ent also provides a description of the final SNL100-03 design definition and is intended to be a companion document to the distribution of the NuMAD blade model files for SNL100-03, which are made publicly available. A summary of the major findings of the Sandia 100-meter blade development program, from the initial SNL100-00 baseline blade through the fourth SNL100-03 blade study, is provided. This summary includes the major findings and outcomes of blade d esign studies, pathways to mitigate the identified large blade design drivers, and tool development that were produced over the course of this five-year research program. A summary of large blade tec hnology needs and research opportunities is also presented.

  6. The SNL100-03 Blade: Design Studies with Flatback Airfoils for the Sandia 100-meter Blade

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4-18129 Unlimited Release Printed September 2014 The SNL100-03 Blade: Design Studies with Flatback Airfoils for the Sandia 100-meter Blade D. Todd Griffith and Phillip W. Richards Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear

  7. Big Machines and Big Science: 80 Years of Accelerators at Stanford

    SciTech Connect (OSTI)

    Loew, Gregory

    2008-12-16

    Longtime SLAC physicist Greg Loew will present a trip through SLAC's origins, highlighting its scientific achievements, and provide a glimpse of the lab's future in 'Big Machines and Big Science: 80 Years of Accelerators at Stanford.'

  8. C.R.S. 24-80 - State History, Archives, and Emblems | Open Energy...

    Open Energy Info (EERE)

    Reference LibraryAdd to library Legal Document- StatuteStatute: C.R.S. 24-80 - State History, Archives, and EmblemsLegal Abstract This Colorado Statute governs the protection...

  9. Equation of state of pyrite to 80 GPa and 2400 K (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: Equation of state of pyrite to 80 GPa and 2400 K Authors: Thompson, Elizabeth C. ; Chidester, Bethany A. ; Fischer, Rebecca A. ; Myers, ...

  10. Text-Alternative Version: Walking Through Examples of Real LM-79 & LM-80 Reports

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of Day 3 of the three-part TINSSL Webinar Series "Understanding and Evaluating LM-79 & LM-80 Reports for SSL Technology," held August 12, 2010.

  11. System 80+{trademark} standard design: CESSAR design certification. Volume 5: Amendment I

    SciTech Connect (OSTI)

    Not Available

    1990-12-21

    This report has been prepared in support of the industry effort to standardize nuclear plant designs. The documents in this series describe the Combustion Engineering, Inc. System 80+{sup TM} Standard Design.

  12. Text-Alternative Version: Understanding and Evaluating In Situ TMP and LM-80 Reports

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of Day 2 of the three-part TINSSL Webinar Series "Understanding and Evaluating LM-79 & LM-80 Reports for SSL Technology," held August 11, 2010.

  13. R.C.W. 80-50-060 | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: R.C.W. 80-50-060Legal Abstract This chapter includes information pertaining to applications,...

  14. R.C.W. 80-50-110 | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: R.C.W. 80-50-110Legal Abstract This chapter governs and supersedes other law or regulations...

  15. I.C. 67-80 - Regulatory Takings | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: I.C. 67-80 - Regulatory TakingsLegal Abstract This statute outlines the criteria and...

  16. R.C.W. 80-50-030 | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: R.C.W. 80-50-030Legal Abstract This section addresses the creation, membership and support...

  17. C.R.S. 24-80-401 - Historical, Prehistorical, and Archaelogical...

    Open Energy Info (EERE)

    navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: C.R.S. 24-80-401 - Historical, Prehistorical, and Archaelogical ResourcesLegal Abstract...

  18. R.C.W. 80-50-090 | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: R.C.W. 80-50-090Legal Abstract This section discusses public hearings to be held by the...

  19. R.C.W. 80-50-045 | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: R.C.W. 80-50-045Legal Abstract Recommendations to secretary, federal energy regulatory...

  20. DOE Awards Sixteen Contracts for up to $80 Billion in Energy Efficiency,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Renewable Energy, and Water Conservation Projects at Federal Facilities | Department of Energy Sixteen Contracts for up to $80 Billion in Energy Efficiency, Renewable Energy, and Water Conservation Projects at Federal Facilities DOE Awards Sixteen Contracts for up to $80 Billion in Energy Efficiency, Renewable Energy, and Water Conservation Projects at Federal Facilities December 18, 2008 - 8:51am Addthis WASHINGTON - Today the Department of Energy (DOE) announced the award of 16 new

  1. RHIC 100 GeV Polarized Proton Luminosity

    SciTech Connect (OSTI)

    Zhang, S. Y.

    2014-01-17

    A big problem in RHIC 100 GeV proton run 2009 was the significantly lower luminosity lifetime than all previous runs. It is shown in this note that the beam intensity decay in run 2009 is caused by the RF voltage ramping in store. It is also shown that the beam decay is not clearly related to the beam momentum spread, therefore, not directly due to the 0.7m. β* Furthermore, the most important factor regarding the low luminosity lifetime is the faster transverse emittance growth in store, which is also much worse than the previous runs, and is also related to the RF ramping. In 100 GeV proton run 2012a, the RF ramping was abandoned, but the β* was increased to 0.85m, with more than 20% loss of luminosity, which is not necessary. It is strongly suggested to use smaller β* in 100 GeV polarized proton run 2015/2016

  2. Piping benchmark problems for the ABB/CE System 80+ Standardized Plant

    SciTech Connect (OSTI)

    Bezler, P.; DeGrassi, G.; Braverman, J.; Wang, Y.K.

    1994-07-01

    To satisfy the need for verification of the computer programs and modeling techniques that will be used to perform the final piping analyses for the ABB/Combustion Engineering System 80+ Standardized Plant, three benchmark problems were developed. The problems are representative piping systems subjected to representative dynamic loads with solutions developed using the methods being proposed for analysis for the System 80+ standard design. It will be required that the combined license licensees demonstrate that their solution to these problems are in agreement with the benchmark problem set. The first System 80+ piping benchmark is a uniform support motion response spectrum solution for one section of the feedwater piping subjected to safe shutdown seismic loads. The second System 80+ piping benchmark is a time history solution for the feedwater piping subjected to the transient loading induced by a water hammer. The third System 80+ piping benchmark is a time history solution of the pressurizer surge line subjected to the accelerations induced by a main steam line pipe break. The System 80+ reactor is an advanced PWR type.

  3. Top 100 U.S. Oil and Gas Fields

    U.S. Energy Information Administration (EIA) Indexed Site

    Top 100 U.S. Oil and Gas Fields March 2015 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 U.S. Energy Information Administration | Top 100 U.S. Oil and Gas Fields i This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA's data, analyses, and forecasts are independent of approval by any other officer or employee of the United States

  4. U10.0 Undulator conceptual design report

    SciTech Connect (OSTI)

    Hoyer, E.

    1994-06-01

    The U10.0 Undulator described here is a 43 period, 10 cm period, 4.5 meter long insertion device. Designed for the Advanced Light Source (ALS) storage ring at the Lawrence Berkeley Laboratory. This insertion device will provide high brightness, quasi-monochromatic radiation in the 5-950 eV energy range. This conceptual design report includes sections on: parameter development, spectral performance, and accelerator requirements, physics specifications and the detailed conceptual design of the magnetic structure, the support/drive systems, the insertion device control system, the vacuum system, and installation for the U10.0 Undulator.

  5. HAB response letter to the 100-F ROD

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    response letter to the 100-F ROD The Board has received and is disappointed by the response from the Tri-Party Agencies provided to HAB Advice 280 on the 100-F RI/FS, and Proposed Plan. The response comments the Tri-Party Agencies provided show that none of the advice provided by the Board was accepted in the formulation of the record of decision (ROD) and remedial approach. The Board takes this opportunity to advise the Tri-Parties on a policy level about the Board's view on remediation

  6. Microsoft Word - 2016_0107_RAP_100-DH-PP_advice_DRAFTv5.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RAP Committee: Draft Advice: 100-D/H, Draft A, v.5 (1/7/16) Page 1 of 2 Engstrom, Mattson, Pollet, Vanni, Suyama, Cimon, Serres Draft Advice: Proposed Plan for Remediation of the 100-DR-1, 100-DR-2, 100-HR-1, 100-HR-2, and 100-HR-3 Operable Units (Draft A) Background A Remedial Investigation/Feasibility Study (Draft A) has been completed for the 100-DR-1, 100-DR-2, 100-HR-1, 100-HR-2, and 100-HR-3 Operable Units (DOE/RL-2010-95; 100-D/H RI/FS) and a Proposed Plan was prepared with the preferred

  7. Superhydrophobic coating (2008 R&D 100 winner)

    ScienceCinema (OSTI)

    Jeff Brinker

    2010-01-08

    A transparent coating that is not just impermeable to water, but actually makes it bounce off a surface to help prevent corrosion, protect electronic and antiquities, or provide a new, more efficient surface to collect pure water. 2008 R&D 100 winner (SAND2008-2215W)

  8. Superhydrophobic Coating (2008 R&D 100 Winner)

    ScienceCinema (OSTI)

    Sandia

    2009-09-01

    A transparent coating that is not just impermeable to water, but actually makes it bounce off a surface to help prevent corrosion, protect electronic and antiquities, or provide a new, more efficient surface to collect pure water. 2008 R&D 100 winner (SAND2008-2215W)

  9. Cantilever Epitaxy Process Wins R&D 100 Award

    Broader source: Energy.gov [DOE]

    Sandia National Laboratories received an R&D 100 Award from R&D Magazine for development of a new process for growing gallium nitride on an etched sapphire substrate. The process, called cantilever epitaxy, promises to make brighter and more efficient green, blue, and white LEDs.

  10. Scaling the Earth System Grid to 100Gbps Networks

    SciTech Connect (OSTI)

    Balman, Mehmet; Sim, Alex

    2012-03-02

    The SC11 demonstration, titled Scaling the Earth System Grid to 100Gbps Networks, showed the ability to use underlying infrastructure for the movement of climate data over 100Gbps network. Climate change research is one of the critical data intensive sciences, and the amount of data is continuously growing. Climate simulation data is geographically distributed over the world, and it needs to be accessed from many sources for fast and efficient analysis and inter-comparison of simulations. We used a 100Gbps link connecting National Energy Research Scientific Computing Center (NERSC) at Lawrence Berkeley National Laboratory (LBNL), Argonne National Laboratory (ANL) and Oak Ridge National Laboratory (ORNL). In the demo, the Intergovernmental Panel on Climate Change (IPCC) Fourth Assessment Report (AR4) phase 3 of the Coupled Model Intercomparison Project (CMIP-3) dataset was staged into the memory of computing nodes at ANL and ORNL from NERSC over the 100Gbps network for analysis and visualization. In general, climate simulation data consists of relatively small and large files with irregular file size distribution in each dataset. In this demo, we addressed challenges on data management in terms of high bandwidth networks, usability of existing protocols and middleware tools, and how applications can adapt and benefit from next generation networks.

  11. Top 100 Oil and Gas Fields of 2009

    U.S. Energy Information Administration (EIA) Indexed Site

    Top 100 Oil and Gas Fields of 2009 Introduction This supplement to the Energy Information ... NEW ARK EAST TX 1794.6 1981 1 2 SAN JUAN BAS IN G AS A RE A CO & NM 1295.2 1927 2 3 ...

  12. Description of Model Data for SNL100-00: The Sandia 100-meter All-glass Baseline Wind Turbine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    00-00: The Sandia 100-meter All-glass Baseline Wind Turbine Blade D. Todd Griffith, Brian R. Resor Sandia National Laboratories Wind and Water Power Technologies Department Introduction This document provides a brief description of model files that are available for the SNL100-00 blade [1]. For each file, codes used to create/read the model files are detailed (e.g. code version and date, description, etc). A summary of the blade model data is also provided from the design report [1]. A Design

  13. Palladium diffusion into bulk copper via the (100) surface.

    SciTech Connect (OSTI)

    Bussmann, Ezra; Pohl, Karsten; Sun, Jiebing; Kellogg, Gary Lee

    2009-01-01

    Using low-energy electron microscopy, we measure the diffusion of Pd into bulk Cu at the Cu(100) surface. Interdiffusion is tracked by measuring the dissolution of the Cu(100)-c(2 x 2)-Pd surface alloy during annealing (T > 240 C). The activation barrier for Pd diffusion from the surface alloy into the bulk is determined to be (1.8 {+-} 0.6) eV. During annealing, we observe the growth of a new layer of Cu near step edges. Under this new Cu layer, dilute Pd remaining near the surface develops a layered structure similar to the Cu{sub 3}Pd L 1{sub 2} bulk alloy phase.

  14. Sandia National Laboratories: 100 Resilient Cities: Sandia Challenge:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Economy Challenge Economy Sandia's N-ABLE™ This agent-based tool models complex economic & critical infrastructure impacts on local & international scales. Photo of N-Able Sandia has conducted well over 100 detailed economic analyses of manmade and natural disasters. Using best-of-class economic models, Sandia has substantial experience developing infrastructure investment strategies to help jurisdictions maximize their potential for an economically competitive and resilient future.

  15. PNM Resources 2401 Aztec NE, MS-Z100

    Energy Savers [EERE]

    PNM Resources 2401 Aztec NE, MS-Z100 Albuquerque, NM 87107 505-241-2025 Fax 505 241-2384 PNMResources.com October 29, 2013 Mr. Christopher Lawrence Office of Electricity Delivery and Energy Reliability (OE-20) U.S. Department of Energy 1000 Independence Avenue, SW Washington, DC 20585 Submitted electronically via email to: Christopher.Lawrence@hq.doe.gov Dear Mr. Lawrence: Subject: Department of Energy (DOE)- Improving Performance of Federal Permitting and Review of Infrastructure Projects,

  16. LANL awards Recovery Act contract worth up to $100 million

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LANL Awards Recovery Act contract LANL awards Recovery Act contract worth up to $100 million TerranearPMC, LLC will haul demolition debris and soils from LANL's Recovery Act cleanup projects for disposal in licensed facilities. March 10, 2010 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new

  17. 100,000 hour design life of turbo compressor packages

    SciTech Connect (OSTI)

    1998-05-20

    Many turbomachinery manufacturers and operators typically quote 100,000 hours as a design limit for service life of turbo compressor components. The Pipeline Research Committee initiated this study to review the life limiting criteria for certain critical components and determine if the design target of 100,000 hours can be safely and reliably met or extended with special component management practices. The first phase of the project was to select the turbomachinery components that would be included in the review. Committee members were surveyed with a detailed questionnaire designed to identify critical components based on: high hours (e.g. at or approaching 100,000 hours) the most common engine types operated by the member organizations, and the components of greatest concern from a risk and expense point of view. The selection made covers a wide range of engine types that are of interest to most of the committee companies. This selection represents some 78% of the high hour units operated by the committee and includes components from GE Frame 3 and Frame 5, Solar Saturn, Rolls Royce Avon, and Cooper RT56 engines. The report goes into detail regarding the various damage mechanism which can be the main life limiting factor of the component; creep, fatigue, environmental attack, wear and microstructure instability. For each of the component types selected, the study identifies the life limiting criteria and outlines how the components may be managed for extended life. Many of the selected components can be reliably operated beyond 100,000 hours by following the management practices set out in the report.

  18. Development of a 100-Watt High Temperature Thermoelectric Generator |

    Broader source: Energy.gov (indexed) [DOE]

    Department of Energy Test results for low and high temperature thermoelectric generators (TEG) those for a 530-watt BiTe TEG; design and construction of a 100-watt high temperature TEG currently in fabrication. PDF icon deer08_lagrandeur.pdf More Documents & Publications Status of Segmented Element Thermoelectric Generator for Vehicle Waste Heat Recovery Status of Segmented Element Thermoelectric Generator for Vehicle Waste Heat Recovery Development of a Scalable 10% Efficient

  19. Preliminary characterization of the 100 area at Argonne National Laboratory

    SciTech Connect (OSTI)

    Biang, C.; Biang, R.; Patel, P.

    1994-06-01

    This characterization report is based on the results of sampling and an initial environmental assessment of the 100 Area of Argonne National Laboratory. It addresses the current status, projected data requirements, and recommended actions for five study areas within the 100 Area: the Lime Sludge Pond, the Building 108 Liquid Retention Pond, the Coal Yard, the East Area Burn Pit, and the Eastern Perimeter Area. Two of these areas are solid waste management units under the Resource Conservation and Recovery Act (the Lime Sludge Pond and the Building 108 Liquid Retention Pond); however, the Illinois Environmental Protection Agency has determined that no further action is necessary for the Lime Sludge Pond. Operational records for some of the activities were not available, and one study area (the East Area Burn Pit) could not be precisely located. Recommendations for further investigation include sample collection to obtain the following information: (1) mineralogy of major minerals and clays within the soils and underlying aquifer, (2) pH of the soils, (3) total clay fraction of the soils, (4) cation exchange capacity of the soils and aquifer materials, and (5) exchangeable cations of the soils and aquifer material. Various other actions are recommended for the 100 Area, including an electromagnetic survey, sampling of several study areas to determine the extent of contamination and potential migration pathways, and sampling to determine the presence of any radionuclides. For some of the study areas, additional actions are contingent on the results of the initial recommendations.

  20. Chemical Properties of Elements 99 and 100 [Einsteinium and Fermium

    DOE R&D Accomplishments [OSTI]

    Seaborg, G. T.; Thompson, S. G.; Harvey, B. G.; Choppin, G. R.

    1954-07-23

    A description of some of the chemical properties and of the methods used in the separations of elements 99 [Einsteinium] and 100 [Fermium] are given. The new elements exhibit the properties expected for the tenth and eleventh actinide elements. Attempts to produce an oxidation state greater than III of element 99 have been unsuccessful. In normal aqueous media only the III state of element 100 appears to exist. The relative spacings of the elution peaks of the new elements in some separations with ion exchange resin columns are the same as the relative spacings of the homologous lanthanide elements. The results of experiments involving cation exchange resins with very concentrated hydrochloric acid eluant show that the new elements, like the earlier actinides, are more strongly complexed than the lanthanides. The new elements also exist partially as anions in concentrated hydrochloric acid, as do earlier actinide elements, and they may be partially separated from each other by means of ion exchange resins. With some eluants interesting reversals of elution positions are observed in the region Bk-Cf-99-100, indicating complex ion formation involving unusual factors.

  1. Hanford 100-D Area Biostimulation Treatability Test Results

    SciTech Connect (OSTI)

    Truex, Michael J.; Vermeul, Vincent R.; Fritz, Brad G.; Mackley, Rob D.; Mendoza, Donaldo P.; Elmore, Rebecca P.; Mitroshkov, Alexandre V.; Sklarew, Deborah S.; Johnson, Christian D.; Oostrom, Martinus; Newcomer, Darrell R.; Brockman, Fred J.; Bilskis, Christina L.; Hubbard, Susan S.; Peterson, John E.; Williams, Kenneth H.; Gasperikova, E.; Ajo-Franklin, J.

    2009-09-30

    Pacific Northwest National Laboratory conducted a treatability test designed to demonstrate that in situ biostimulation can be applied to help meet cleanup goals in the Hanford Site 100-D Area. In situ biostimulation has been extensively researched and applied for aquifer remediation over the last 20 years for various contaminants. In situ biostimulation, in the context of this project, is the process of amending an aquifer with a substrate that induces growth and/or activity of indigenous bacteria for the purpose of inducing a desired reaction. For application at the 100-D Area, the purpose of biostimulation is to induce reduction of chromate, nitrate, and oxygen to remove these compounds from the groundwater. The in situ biostimulation technology is intended to provide supplemental treatment upgradient of the In Situ Redox Manipulation (ISRM) barrier previously installed in the Hanford 100-D Area and thereby increase the longevity of the ISRM barrier. Substrates for the treatability test were selected to provide information about two general approaches for establishing and maintaining an in situ permeable reactive barrier based on biological reactions, i.e., a biobarrier. These approaches included 1) use of a soluble (miscible) substrate that is relatively easy to distribute over a large areal extent, is inexpensive, and is expected to have moderate longevity; and 2) use of an immiscible substrate that can be distributed over a reasonable areal extent at a moderate cost and is expected to have increased longevity.

  2. Design and calibration of a test facility for MLI thermal performance measurements below 80K

    SciTech Connect (OSTI)

    Boroski, W.; Kunzelman, R.; Ruschman, M.; Schoo, C.

    1992-04-01

    The design geometry of the SSC dipole cryostat includes active thermal radiation shields operating at 80K and 20K respectively. Extensive measurements conducted in a Heat Leak Test Facility (HLTF) have been used to evaluate the thermal performance of candidate multilayer insulation (MLI) systems for the 80K thermal shield, with the present system design based upon those measurement results. With the 80K MLI geometry established, efforts have focused on measuring the performance of MLI systems near 20K. A redesign of the HLTF has produced a measurement facility capable of conducting measurements with the warm boundary fixed at 80K and the cold boundary variable from 10K to 50K. Removing the 80K shield permits measurements with a warm boundary at 300K. The 80K boundary consists of a copper shield thermally anchored to a liquid nitrogen reservoir. The cold boundary consists of a copper anchor plate whose temperature is varied through boil-off gas from a 500 liter helium supply dewar. A transfer line heat exchanger supplies the boil-off gas to the anchor plate at a constant and controlled rate. The gas, which serves as cooling gas, is routed through a copper cooling tube soldered into the anchor plate. Varying the cooling gas flow rate varies the amount of refrigeration supplied to the anchor plate, thereby determining the plate temperature. A resistance heater installed on the anchor plate is regulated by a cryogenic temperature controller to provide final temperature control. Heat leak values are measured using a heatmeter which senses heat flow as a temperature gradient across a fixed thermal impedance. Since the thermal conductivity of the thermal impedance changes with temperature, the heatmeter is calibrated at key cold boundary temperatures. Thus, the system is capable of obtaining measurement data under a variety of system conditions. 7 refs.

  3. WINDExchange: Utility-Scale Land-Based 80-Meter Wind Maps

    Wind Powering America (EERE)

    Maps & Data Printable Version Bookmark and Share Land-Based Utility-Scale Maps Potential Capacity Maps Offshore Wind Maps Community-Scale Maps Residential-Scale Maps Installed Capacity Maps Utility-Scale Land-Based 80-Meter Wind Maps The U.S. Department of Energy provides an 80-meter (m) height, high-resolution wind resource map for the United States with links to state wind maps. States, utilities, and wind energy developers use utility-scale wind resource maps to locate and quantify the

  4. DOE Announces $80 Million in Funding to Increase SuperTruck Efficiency |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy $80 Million in Funding to Increase SuperTruck Efficiency DOE Announces $80 Million in Funding to Increase SuperTruck Efficiency March 1, 2016 - 11:42am Addthis NEWS MEDIA CONTACT 202-586-4940 DOENews@hq.doe.gov Funding Opportunity Announcement and three new projects to focus on research, development and demonstration of plug-in electric powertrain technologies WASHINGTON - Building on the notable successes of the SuperTruck initiative, Deputy Assistant Secretary for

  5. 80th Annual Conference of the DPG & DPG Spring Meeting (Regensburg,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Germany) - JCAP 80th Annual Conference of the DPG & DPG Spring Meeting (Regensburg, Germany) 80th Annual Conference of the DPG & DPG Spring Meeting (Regensburg, Germany) Sun, Mar 6, 2016 11:30am 11:30 Fri, Mar 11, 2016 12:30pm 12:30 Regensburg Germany Matthias Richter, "Probing the TiO2/Liquid Interface of a Photoelectrochemical Cell by X-Ray Photoelectron Spectroscopy" Amorphous TiO2 coatings can stabilize semiconductor photoanodes such as Si, GaAs, and GaP that are

  6. Photo of the Week: Smashing Atoms with 80-ton Magnets | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Smashing Atoms with 80-ton Magnets Photo of the Week: Smashing Atoms with 80-ton Magnets April 11, 2014 - 1:32pm Addthis The cyclotron, invented by Ernest Lawrence in the 1930s, is a unique circular particle accelerator, which Lawrence himself referred to as a "proton merry-go-round." In reality, the cyclotron specialized in smashing atoms. Part of this atom-smashing process requires very large, very heavy magnets -- sometimes weighing up to 220 tons. In this photo, workers

  7. Bottom-hole contribution: ramifications of Revenue Ruling 80-153

    SciTech Connect (OSTI)

    Dickens, T.L.

    1981-12-01

    Revenue Ruling 80-53 departs from the previous treatment accorded the bottom-hole contribution (BHC), which had been one way for mineral owners to gauge the potential drilling horizons of mineral interests they owned. This analysis of Ruling 80-53 sets forth its direct and indirect implications for the taxpayers, and offers some tax-planning suggestions. It may not be as harsh as was first thought, but taxpayers should develop the necessary tax facts before using BHC in order to avoid its harsh results. 20 references.

  8. Comparative study of the alloying effect on the initial oxidation of Cu-Au(100) and Cu-Pt(100)

    SciTech Connect (OSTI)

    Luo, Langli; Zhou, Guangwen; Kang, Yihong; Yang, Judith C.; Su, Dong; Stach, Eric A.

    2014-03-24

    Using in situ transmission electron microscopy, we show that the oxidation of the Cu-Au(100) results in the formation of Cu{sub 2}O islands that deeply embed into the Cu-Au substrate while the oxidation of the Cu-Pt(100) leads to the formation of Cu{sub 2}O islands that highly protrude above the Cu-Pt substrate. Their difference is attributed to the different mobilities of Pt and Au in the Cu base alloys for which the sluggish mobility of Pt in Cu results in trapped Pt atoms at the oxide/alloy interface while the faster mobility of Au in Cu leads to enhanced rehomogenization of the alloy composition.

  9. Trials with a 100% pellet burden in blast furnace No. 6 at Hoogovens IJmuiden

    SciTech Connect (OSTI)

    Schoone, E.; Toxopeus, H.; Vos, D.

    1995-12-01

    The burden consists of 50% high basicity sinter and 50% home made olivine pellets. Two coke oven plants produce the required coke, about 340 kg/t (680 lb/NT). The average pulverized coal injection rate is 150 kg/t (300 lb/NT). To anticipate the aging coke oven plant No. 2 the coal injection capacity will e increased by 50% in 1996, by the installation of a third coal grinding line. In the Netherlands environmental issues have a high impact on further developments. In particular the environmental regulations require a significant decrease of dust, SO{sub 2} and dioxins emitted by the sinter plant. The appropriate measures must be concluded in the second part of this decade. To avoid costly conventional solutions Hoogovens has been testing since April, 1994 the Emission Optimized Sintering (EOS). In case of failure of EOS, the situation of a (partially) closed sinter plant was tested. Purchased pellets replaced sinter, leading to a 100% pellet and an 80% pellet/20% sinter trial. The trials were executed in the first half of 1994 at blast furnace No. 6, equipped with a PW-bell less top. Results are described.

  10. System 80+{trademark} Standard Design: CESSAR design certification. Volume 10: Amendment I

    SciTech Connect (OSTI)

    Not Available

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80{sup +}{trademark} Standard Design. This volume 10 discusses the Steam and Power Conversion System and Radioactive Waste Management.

  11. System 80+{trademark} Standard Design: CESSAR design certification. Volume 2: Amendment I

    SciTech Connect (OSTI)

    Not Available

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report - Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These documents describe the Combustion Engineering, Inc. System 80+{sup TM} Standard Design. This report, Volume 2, in conjunction with Volume 3, provides the design of structures, components, equipment and systems.

  12. System 80+{trademark} Standard Design: CESSAR design certification. Volume 9: Amendment I

    SciTech Connect (OSTI)

    Not Available

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80{sup +}{trademark} Standard Design. This volume 9 discusses Electric Power and Auxiliary Systems.

  13. System 80+{trademark} Standard Design: CESSAR design certification. Volume 8: Amendment I

    SciTech Connect (OSTI)

    Not Available

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80{sup +}{trademark} Standard Design. This volume 8 provides a description of instrumentation and controls.

  14. System 80+{trademark} Standard Design: CESSAR design certification. Volume 6: Amendment I

    SciTech Connect (OSTI)

    Not Available

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report - Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These documents describe the Combustion Engineering, Inc. System 80+{sup TM} Standard Design. This report, Volume 6, in conjunction with Volume 7, provides a description of engineered safety features.

  15. Top 100 U.S. Oil and Gas Fields

    U.S. Energy Information Administration (EIA) Indexed Site

    Supplement from: U.S. Crude Oil and Natural Gas Proved Reserves Top 100 U.S. Oil and Gas Fields With Data for 2013 | Release Date: April 2, 2015 | Next Release Date: January 2016 Previous Issues (pdf): Year: 2009 2008 2007 (Appendix B) 2006 (Appendix B) 2005 (Appendix B) 2004 (Appendix B) 2003 (Appendix B) 2002 (Appendix B) 2001 (Appendix B) 2000 (Appendix B) 1999 (Appendix B) 1998 (Appendix B) 1997 (Appendix B) 1996 (Appendix B) Go Introduction This supplement to the U.S. Energy Information

  16. VP 100: Retooling Michigan -- Yachts and Watts | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Retooling Michigan -- Yachts and Watts VP 100: Retooling Michigan -- Yachts and Watts June 18, 2010 - 4:13pm Addthis Energetx Composites was able to purchase equipment such as this mold for utility-scale wind turbine blades thanks to a Recovery Act grant that matched the company’s $3.5 million investment. | Photo Courtesy of Energetx | Energetx Composites was able to purchase equipment such as this mold for utility-scale wind turbine blades thanks to a Recovery Act grant that matched the

  17. Certification of the Cessna 152 on 100% ethanol

    SciTech Connect (OSTI)

    Shauck, M.E.; Zanin, M.G.

    1997-12-31

    In June 1996, the Renewable Aviation Fuels Development Center (RAFDC) at Baylor University in Waco, Texas, received a Supplemental Type Certificate (STC) for the use of 100% ethanol as a fuel for the Cessna 152, the most popular training aircraft in the world. This is the first certification granted by the Federal Aviation Administration (FAA) for a non-petroleum fuel. Certification of an aircraft on a new fuel requires a certification of the engine followed by a certification of the airframe/engine combination. This paper will describe the FAA airframe certification procedure, the tests required and their outcome using ethanol as an aviation fuel in a Cessna 152.

  18. The 100K West Reactor Water Treatment Facilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (DOE) and CH2M HILL Plateau Remediation Company are using American Recovery and Reinvestment Act (Recovery Act) funding to accelerate decommissioning and demolition (D&D) work at the 100K West Reactor Water Treatment Facilities at the Hanford Site in southeast Washington State. The K Area spans 535 acres and includes Hanford's K East and K West reactors, adjacent fuel storage basins, and several facilities and waste sites that supported reactor operations from the 1950s to the 1970s. The

  19. 100 Area soil washing bench-scale test procedures

    SciTech Connect (OSTI)

    Freeman, H.D.; Gerber, M.A.; Mattigod, S.V.; Serne, R.J.

    1993-03-01

    This document describes methodologies and procedures for conducting soil washing treatability tests in accordance with the 100 Area Soil Washing Treatability Test Plan (DOE-RL 1992, Draft A). The objective of this treatability study is to evaluate the use of physical separation systems and chemical extraction methods as a means of separating chemically and radioactively contaminated soil fractions from uncontaminated soil fractions. These data will be primarily used for determining feasibility of the individual unit operations and defining the requirements for a system, or systems, for pilot-scale testing.

  20. Modeling of residual stresses by HY-100 weldments

    SciTech Connect (OSTI)

    Zacharia, T.; Taljat, B.; Radhakrishnan, B.

    1997-02-01

    Residual stress distribution in a HY-100 steel disk, induced by GTA spot welding, was analyzed by finite element (FE) formulations and measured by neutron diffraction (ND). Computations used temperature- dependent thermophysical and mechanical properties. FE model predictions are in good agreement with ND data in far heat affected zone (HAZ) and in base metal. Predicted residual stresses in fusion zone and near HAZ were higher than those measured by ND. This discrepancy was attributed to microstructural changes and associated material properties in the HAZ and fusion zone due to phase transformations during the weld thermal cycle.

  1. Small Water System Management Program: 100 K Area

    SciTech Connect (OSTI)

    Hunacek, G.S. Jr.

    1995-06-29

    Purposes of this document are: to provide an overview of the service and potable water system presently in service at the Hanford Site`s 100 K Area; to provide future system forecasts based on anticipated DOE activities and programs; to delineate performance, design, and operations criteria; and to describe planned improvements. The objective of the small water system management program is to assure the water system is properly and reliably managed and operated, and continues to exist as a functional and viable entity in accordance with WAC 246-290-410.

  2. $100 billion mistake: is the windfall revenue estimate too high

    SciTech Connect (OSTI)

    Samuelson, R.J.

    1980-04-26

    An economic analysis of the Windfall Profits Tax (as proposed at the time) suggests that the estimate of a $227 billion revenue over the next decade may be as much as $100 billion too high. This judgment is based on provisions in the law allowing states to deduct severance taxes up to 15 percent on oil before federal taxes are paid and offering tax incentives for tertiary projects. The arithmetic, particularly in the case of enhanced oil recovery, illustrates how the incentives could shift more production from a 70% to a 30% tax rate than the Federal government had estimated. (DCK)

  3. Preliminary design report: Babcock and Wilcox BR-100 100-ton rail/barge spent fuel shipping cask

    SciTech Connect (OSTI)

    None

    1990-02-01

    The purpose of this document is to provide information on burnup credit as applied to the preliminary design of the BR-100 shipping cask. There is a brief description of the preliminary basket design and the features used to maintain a critically safe system. Following the basket description is a discussion of various criticality analyses used to evaluate burnup credit. The results from these analyses are then reviewed in the perspective of fuel burnups expected to be shipped to either the final repository or a Monitored Retrievable Storage (MRS) facility. The hurdles to employing burnup credit in the certification of any cask are then outlines and reviewed. the last section gives conclusions reached as to burnup credit for the BR-100 cask, based on our analyses and experience. All information in this study refers to the cask configured to transport PWR fuel. Boiling Water Reactor (BWR) fuel satisfies the criticality requirements so that burnup credit is not needed. All calculations generated in the preparation of this report were based upon the preliminary design which will be optimized during the final design. 8 refs., 19 figs., 16 tabs.

  4. Test results of applicative 100 W Stirling engine

    SciTech Connect (OSTI)

    Hirata, Koichi; Kagawa, Noboru; Takeuchi, Makoto; Yamashita, Iwao; Isshiki, Naotsugu; Hamaguchi, Kazuhiro

    1996-12-31

    A small 100 W displacer-type Stirling engine, Ecoboy-SCM81, has been developed by a committee of the Japan Society of Mechanical Engineers (JSME). The engine contains unique features, including an expansion cylinder which is heated by either combustion gas or direct solar energy. Also, a simple cooling system rejects heat from the working fluid. A displacer piston has both heating and cooling inner tubes for the working fluid which flows to and from outer tubes. The outer tubes for heating were located at the top of the expansion cylinder and the outer tubes for cooling were located in the middle of the cylinder. A regenerator is located in the displacer piston. The components of the engine adopted some new technologies. For instance, a porous type matrix consisting of pressed zigzag stainless steel wires were adopted for the regenerator. The matrix is practical for Stirling engines because it can be made at low cost and the assembling process is simplified.

  5. Radiopurity control in the NEXT-100 double beta decay experiment

    SciTech Connect (OSTI)

    lvarez, V.; Crcel, S.; Cervera, A.; Daz, J.; Ferrario, P.; Gil, A.; Gmez-Cadenas, J. J.; Laing, A.; Liubarsky, I.; Lorca, D.; Martn-Albo, J.; Martnez, A.; Monrabal, F.; Muoz Vidal, J.; Nebot-Guinot, M.; Rodrguez, J.; Serra, L.; Simn, A.; Sofka, C.; Sorel, M. [Instituto de Fsica Corpuscular (IFIC), CSIC and Universitat de Valncia, 46980 Paterna, Valencia (Spain)] [Instituto de Fsica Corpuscular (IFIC), CSIC and Universitat de Valncia, 46980 Paterna, Valencia (Spain); and others

    2013-08-08

    An extensive material screening and selection process is underway in the construction of the 'Neutrino Experiment with a Xenon TPC' (NEXT), intended to investigate neutrinoless double beta decay using a high-pressure xenon gas TPC filled with 100 kg of Xe enriched in {sup 136}Xe. Determination of the radiopurity levels of the materials is based on gamma-ray spectroscopy using ultra-low background germanium detectors at the Laboratorio Subterrneo de Canfranc (Spain) and also on Glow Discharge Mass Spectrometry. Materials to be used in the shielding, pressure vessel, electroluminescence and high voltage components and energy and tracking readout planes have been already taken into consideration. The measurements carried out are presented, describing the techniques and equipment used, and the results obtained are shown, discussing their implications for the NEXT experiment.

  6. COMMISSIONING AND OPERATION OF THE CEBAF 100 MV CRYOMODULES

    SciTech Connect (OSTI)

    Allison, Trent; Davis, G; Drury, Michael; Harwood, Leigh; Hogan, John; Kimber, Andrew; Lahti, George; Merz, William; Nelson, Richard; Plawski, Tomasz; Seidman, David; Spata, Michael; Wilson, Michael

    2012-07-01

    The Continuous Electron Beam Accelerator Facility (CEBAF) energy upgrade from 6 GeV to 12 GeV includes the installation of ten new 100 MV cryomodules and RF systems. The superconducting RF cavities are designed to operate CW at a maximum accelerating gradient of 19.3 MV/m. To support the higher gradients and higher Q{sub L} ({approx} 3 x 10{sup 7}), a new RF system has been developed and is being installed to power and control the cavities. The RF system employs digital control and 13 kW klystrons. Recently, two of these cryomodules and associated RF hardware and software have been installed and commissioned in the CEBAF accelerator. Electrons at linac currents up to 540 {micro}A have been successfully accelerated and used for nuclear physics experiments. This paper reports on the commissioning and operation of the RF system and cryomodules.

  7. Identification of Au–S complexes on Au(100)

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Walen, Holly; Liu, Da -Jiang; Oh, Junepyo; Yang, Hyun Jin; Kim, Yousoo; Thiel, P. A.

    2016-01-25

    In this study, using a combination of scanning tunneling microscopy and density functional theory (DFT) calculations, we have identified a set of related Au–S complexes that form on Au(100), when sulfur adsorbs and lifts the hexagonal surface reconstruction. The predominant complex is diamond-shaped with stoichiometry Au4S5. All of the complexes can be regarded as combinations of S–Au–S subunits. The complexes exist within, or at the edges of, p(2 × 2) sulfur islands that cover the unreconstructed Au regions, and are observed throughout the range of S coverage examined in this study, 0.009 to 0.12 monolayers. A qualitative model is developedmore » which incorporates competitive formation of complexes, Au rafts, and p(2 × 2) sulfur islands, as Au atoms are released by the surface structure transformation.« less

  8. Solar energy legal bibliography: second update. [100 references

    SciTech Connect (OSTI)

    Weiner, S.

    1981-05-01

    The Solar Energy Legal Bibliograhy Update is a compilation of approximately 100 solar publications abstracted for their legal and policy content (covering the period February 1980 to July 1980). Emphasis is on legal barriers and incentives to solar energy development. Abstracts are arranged under the following categories: Antitrust, Biomass, Building Codes, Consumer Protection, Environmental Aspects, Federal Leglislation and Programs, Financing/Insurance, Institutional Issues, International Law, Labor, Land Use (Covenants, Easements, Nuisance, Zoning), Local Legislation and Programs, Ocean Energy, Passive Solar Heating and Cooling, Patents and Licenses, Photovoltaics, Small-Scale Hydro, Solar Access Rights, Solar Heating and Cooling, Solar Thermal Power Systems, Standards, State Legislation and Programs, Tax Law, Tort Liability, Utilities, Warranties, Wind Resources, and General Solar Law.

  9. Evaluation of Die Chilling Effects during Forging of Nimonic-80A Superalloy

    SciTech Connect (OSTI)

    Shahriari, D.; Sadeghi, M. H.; Amiri, A.; Cheraghzadeh, M.

    2010-06-15

    Nimonic-80A is a kind of nickel-based superalloys which is used in high temperature components of land gas turbines. In this paper, the influence of four design factors: die temperature, strain rate, friction coefficient and geometry size of ring sample over the variation of internal diameters (VID) and forging load (FL) was studied. It was done by means of design methodology based on DOE-designated full factorial and FE simulations. FEM and experimental results showed that the variation of internal diameters and forging load had inverse proportion to the die temperature. Regression models were developed by using the response surface methodology (RSM) for VID and FL. Rate of the dynamic recrystallization varied depending on different amounts of die temperature. The results can be used in the semi-isothermal forging of complex part of the Nimonic-80A.

  10. Microsoft Word - 2011_1205_Engstrom_RAP_100-K-comments.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 By Dale Engstrom, HAB Issue Manager and RAP Vice-chair The Remedial InvestigationFeasibility Study for the 100-KR-1, 100-KR-2 and 100-KR-4 Operable Units (DOERL-2010-97, Draft...

  11. PPPL team wins 80 million processor hours on nation's fastest supercomputer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | Princeton Plasma Physics Lab team wins 80 million processor hours on nation's fastest supercomputer By John Greenwald January 26, 2016 Tweet Widget Google Plus One Share on Facebook Model of colliding magnetic fields before magnetic reconnection. (Model by Will Fox courtesy of Physical Review Letters 113, 105003 2014) Model of colliding magnetic fields before magnetic reconnection. (Model by Will Fox courtesy of Physical Review Letters 113, 105003 2014) The U.S Department of Energy (DOE)

  12. Ethylene is at the heart of the petrochemical industry, as about 80% of all

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ethylene is at the heart of the petrochemical industry, as about 80% of all petrochemicals are derived from products of steam cracking ethylene plants. Ethane oxidative dehydrogenation (ODH) is an attractive alternative process for ethylene production. NiO-based catalysts have exhibited promising performance in ethane ODH. In particular, Ni-Nb-O mixed oxides constitute a low-temperature catalytic system exhibiting both high ethane conversion and high ethylene selectivity. Further improvement of

  13. PPPL team wins 80 million processor hours on nation's fastest supercomputer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | Princeton Plasma Physics Lab team wins 80 million processor hours on nation's fastest supercomputer By John Greenwald January 26, 2016 Tweet Widget Google Plus One Share on Facebook Model of colliding magnetic fields before magnetic reconnection. (Model by Will Fox courtesy of Physical Review Letters 113, 105003 2014) Model of colliding magnetic fields before magnetic reconnection. (Model by Will Fox courtesy of Physical Review Letters 113, 105003 2014) The U.S Department of Energy (DOE)

  14. Hanford Site 100-N Area In Situ Bioremediation of UPR-100-N-17, Deep Petroleum Unplanned Release - 13245

    SciTech Connect (OSTI)

    Saueressig, Daniel G.

    2013-07-01

    In 1965 and 1966, approximately 303 m{sup 3} of Number 2 diesel fuel leaked from a pipeline used to support reactor operations at the Hanford Site's N Reactor. N Reactor was Hanford's longest operating reactor and served as the world's first dual purpose reactor for military and power production needs. The Interim Action Record of Decision for the 100-N Area identified in situ bioremediation as the preferred alternative to remediate the deep vadose zone contaminated by this release. A pilot project supplied oxygen into the vadose zone to stimulate microbial activity in the soil. The project monitored respiration rates as an indicator of active biodegradation. Based on pilot study results, a full-scale system is being constructed and installed to remediate the vadose zone contamination. (authors)

  15. EUV optical design for 100 nm CD imaging system

    SciTech Connect (OSTI)

    Sweeney, D.W.; Hudyma, R.; Chapman, H.B.; Shafer, D.

    1998-04-09

    The imaging specifications for extreme ultraviolet lithography (EUVL) projection optics parallel those of other optical lithographies. Specifications are scaled to reflect the 100 nm critical dimension for the first generation EUVL systems. The design being fabricated for the Engineering Test Stand, an EUVL alpha tool, consists of a condenser with six channels to provide an effective partial coherence factor of 0.7. The camera contains four mirrors; three of the mirrors are aspheres and the fourth is spherical. The design of the optical package has been constrained so that the angles of incidence and the variations in the angle of incidence of all rays allow for uniform multilayer coatings. The multilayers introduce a slight shift in image position and magnification. We have shown that a system aligned with visible light is also aligned at 13.4 nm. Each mirror must be fabricated with an RMS figure error of less than 0.25 nm and better than 0.2 nm RMS roughness. Optical surfaces that exceed each of these specifications individually have been fabricated. The success of EUVL requires that these specifications be met simultaneously.

  16. Epitaxial growth of fcc-Co{sub x}Ni{sub 100-x} thin films on MgO(110) single-crystal substrates

    SciTech Connect (OSTI)

    Ohtake, Mitsuru; Nukaga, Yuri; Sato, Yoichi; Futamoto, Masaaki; Kirino, Fumiyoshi

    2009-12-15

    Co{sub x}Ni{sub 100-x} (x=100, 80, 20, 0 at. %) epitaxial thin films were prepared on MgO(110) single-crystal substrates heated at 300 deg. C by ultrahigh vacuum molecular beam epitaxy. The growth mechanism is discussed based on lattice strain and crystallographic defects. CoNi(110) single-crystal films with a fcc structure are obtained for all compositions. Co{sub x}Ni{sub 100-x} film growth follows the Volmer-Weber mode. X-ray diffraction analysis indicates that the out-of-plane and the in-plane lattice spacings of the Co{sub x}Ni{sub 100-x} films are in agreement within +-0.5% with the values of the respective bulk Co{sub x}Ni{sub 100-x} crystals, suggesting that the strain in the film is very small. High-resolution cross-sectional transmission microscopy shows that an atomically sharp boundary is formed between a Co(110){sub fcc} film and a MgO(110) substrate, where periodical misfit dislocations are preferentially introduced in the film at the Co/MgO interface. The presence of such periodical misfit dislocations relieves the strain caused by the lattice mismatch between the film and the substrate.

  17. 100-KE REACTOR CORE REMOVAL PROJECT ALTERNATIVE ANALYSIS WORKSHOP REPORT

    SciTech Connect (OSTI)

    HARRINGTON RA

    2010-01-15

    On December 15-16, 2009, a 100-KE Reactor Core Removal Project Alternative Analysis Workshop was conducted at the Washington State University Consolidated Information Center, Room 214. Colburn Kennedy, Project Director, CH2M HILL Plateau Remediation Company (CHPRC) requested the workshop and Richard Harrington provided facilitation. The purpose of the session was to select the preferred Bio Shield Alternative, for integration with the Thermal Shield and Core Removal and develop the path forward to proceed with project delivery. Prior to this workshop, the S.A. Robotics (SAR) Obstruction Removal Alternatives Analysis (565-DLV-062) report was issued, for use prior to and throughout the session, to all the team members. The multidisciplinary team consisted ofrepresentatives from 100-KE Project Management, Engineering, Radcon, Nuclear Safety, Fire Protection, Crane/Rigging, SAR Project Engineering, the Department of Energy Richland Field Office, Environmental Protection Agency, Washington State Department of Ecology, Defense Nuclear Facility Safety Board, and Deactivation and Decommission subject matter experts from corporate CH2M HILL and Lucas. Appendix D contains the workshop agenda, guidelines and expectations, opening remarks, and attendance roster going into followed throughout the workshop. The team was successful in selecting the preferred alternative and developing an eight-point path forward action plan to proceed with conceptual design. Conventional Demolition was selected as the preferred alternative over two other alternatives: Diamond Wire with Options, and Harmonic Delamination with Conventional Demolition. The teams preferred alternative aligned with the SAR Obstruction Removal Alternative Analysis report conclusion. However, the team identified several Path Forward actions, in Appendix A, which upon completion will solidify and potentially enhance the Conventional Demolition alternative with multiple options and approaches to achieve project delivery. In brief, the Path Forward was developed to reconsider potential open air demolition areas; characterize to determine if any zircaloy exists, evaluate existing concrete data to determine additional characterization needs, size the new building to accommodate human machine interface and tooling, consider bucket thumb and use ofshape-charges in design, and finally to utilize complex-wide and industry explosive demolition lessons learned in the design approach. Appendix B documents these results from the team's use ofValue Engineering process tools entitled Weighted Analysis Alternative Matrix, Matrix Conclusions, Evaluation Criteria, and Alternative Advantages and Disadvantages. These results were further supported with the team's validation of parking-lot information sheets: memories (potential ideas to consider), issues/concerns, and assumptions, contained in Appendix C. Appendix C also includes the recorded workshop flipchart notes taken from the SAR Alternatives and Project Overview presentations. The SAR workshop presentations, including a 3-D graphic illustration demonstration video have been retained in the CHPRC project file, and were not included in this report due to size limitations. The workshop concluded with a round robin close-out where each member was engaged for any last minute items and meeting utility. In summary, the team felt the session was value added and looked forward to proceeding with the recommended actions and conceptual design.

  18. The NSLS 100 element solid state array detector

    SciTech Connect (OSTI)

    Furenlid, L.R.; Kraner, H.W.; Rogers, L.C.; Stephani, D.; Beuttenmuller, R.H.; Beren, J. ); Cramer, S.P. . Dept. of Applied Science)

    1991-01-01

    X-ray absorption studies of dilute samples require fluorescence detection techniques. Since signal-to-noise ratios are governed by the ratio of fluorescent to scattered photons counted by a detector, solid state detectors which can discriminate between fluorescence and scattered photons have become the instruments of choice for trace element measurements. Commercially available 13 element Ge array detectors permitting total count rates < 500,000 counts per second are now in routine use. Since x-ray absorption beamlines at high brightness synchrotron sources can already illuminate most dilute samples with enough flux to saturate the current generation of solid state detectors, the development of next-generation instruments with significantly higher total count rates is essential. We present the design and current status of the 100 element Si array detector being developed in a collaboration between the NSLS and the Instrumentation Division at Brookhaven National Laboratory. The detecting array consists of a 10*10 matrix of 4mm * 4mm elements laid out on a single piece of ultra-high purity silicon mounted at the front end of a liquid nitrogen dewar assembly. A matrix of charge sensitive integrating preamplifiers feed signals to an array of shaping amplifiers, single channel analyzers, and scalers. An electronic switch, delay amplifier, linear gate, digital scope, peak sensing A to D converter, and histogramming memory module provide for complete diagnostics and channel calibration. The entire instrument is controlled by a LabView 2 application on a MacII ci; the software also provides full control over beamline hardware and performs the data collection.

  19. The NSLS 100 element solid state array detector

    SciTech Connect (OSTI)

    Furenlid, L.R.; Kraner, H.W.; Rogers, L.C.; Stephani, D.; Beuttenmuller, R.H.; Beren, J.; Cramer, S.P.

    1991-12-31

    X-ray absorption studies of dilute samples require fluorescence detection techniques. Since signal-to-noise ratios are governed by the ratio of fluorescent to scattered photons counted by a detector, solid state detectors which can discriminate between fluorescence and scattered photons have become the instruments of choice for trace element measurements. Commercially available 13 element Ge array detectors permitting total count rates < 500,000 counts per second are now in routine use. Since x-ray absorption beamlines at high brightness synchrotron sources can already illuminate most dilute samples with enough flux to saturate the current generation of solid state detectors, the development of next-generation instruments with significantly higher total count rates is essential. We present the design and current status of the 100 element Si array detector being developed in a collaboration between the NSLS and the Instrumentation Division at Brookhaven National Laboratory. The detecting array consists of a 10*10 matrix of 4mm * 4mm elements laid out on a single piece of ultra-high purity silicon mounted at the front end of a liquid nitrogen dewar assembly. A matrix of charge sensitive integrating preamplifiers feed signals to an array of shaping amplifiers, single channel analyzers, and scalers. An electronic switch, delay amplifier, linear gate, digital scope, peak sensing A to D converter, and histogramming memory module provide for complete diagnostics and channel calibration. The entire instrument is controlled by a LabView 2 application on a MacII ci; the software also provides full control over beamline hardware and performs the data collection.

  20. Fusion Welding of AerMet 100 Alloy

    SciTech Connect (OSTI)

    ENGLEHART, DAVID A.; MICHAEL, JOSEPH R.; NOVOTNY, PAUL M.; ROBINO, CHARLES V.

    1999-08-01

    A database of mechanical properties for weldment fusion and heat-affected zones was established for AerMet{reg_sign}100 alloy, and a study of the welding metallurgy of the alloy was conducted. The properties database was developed for a matrix of weld processes (electron beam and gas-tungsten arc) welding parameters (heat inputs) and post-weld heat treatment (PWHT) conditions. In order to insure commercial utility and acceptance, the matrix was commensurate with commercial welding technology and practice. Second, the mechanical properties were correlated with fundamental understanding of microstructure and microstructural evolution in this alloy. Finally, assessments of optimal weld process/PWHT combinations for cotildent application of the alloy in probable service conditions were made. The database of weldment mechanical properties demonstrated that a wide range of properties can be obtained in welds in this alloy. In addition, it was demonstrated that acceptable welds, some with near base metal properties, could be produced from several different initial heat treatments. This capability provides a means for defining process parameters and PWHT's to achieve appropriate properties for different applications, and provides useful flexibility in design and manufacturing. The database also indicated that an important region in welds is the softened region which develops in the heat-affected zone (HAZ) and analysis within the welding metallurgy studies indicated that the development of this region is governed by a complex interaction of precipitate overaging and austenite formation. Models and experimental data were therefore developed to describe overaging and austenite formation during thermal cycling. These models and experimental data can be applied to essentially any thermal cycle, and provide a basis for predicting the evolution of microstructure and properties during thermal processing.

  1. Method to produce alumina aerogels having porosities greater than 80 percent

    DOE Patents [OSTI]

    Poco, John F.; Hrubesh, Lawrence W.

    2003-09-16

    A two-step method for producing monolithic alumina aerogels having porosities of greater than 80 percent. Very strong, very low density alumina aerogel monoliths are prepared using the two-step sol-gel process. The method of preparing pure alumina aerogel modifies the prior known sol method by combining the use of substoichiometric water for hydrolysis, the use of acetic acid to control hydrolysis/condensation, and high temperature supercritical drying, all of which contribute to the formation of a polycrystalline aerogel microstructure. This structure provides exceptional mechanical properties of the alumina aerogel, as well as enhanced thermal resistance and high temperature stability.

  2. EVIDENCE OF NON-THERMAL X-RAY EMISSION FROM HH 80

    SciTech Connect (OSTI)

    Lpez-Santiago, J.; Peri, C. S.; Benaglia, P.; Bonito, R.; Miceli, M.; Albacete-Colombo, J. F.; De Castro, E.

    2013-10-20

    Protostellar jets appear at all stages of star formation when the accretion process is still at work. Jets travel at velocities of hundreds of km s{sup 1}, creating strong shocks when interacting with the interstellar medium. Several cases of jets have been detected in X-rays, typically showing soft emission. For the first time, we report evidence of hard X-ray emission possibly related to non-thermal processes not explained by previous models of the post-shock emission predicted in the jet/ambient interaction scenario. HH 80 is located at the south head of the jet associated with the massive protostar IRAS 18162-2048. It shows soft and hard X-ray emission in regions that are spatially separated, with the soft X-ray emission region situated behind the region of hard X-ray emission. We propose a scenario for HH 80 where soft X-ray emission is associated with thermal processes from the interaction of the jet with denser ambient matter and hard X-ray emission is produced by synchrotron radiation at the front shock.

  3. Transport of triplet excitons along continuous 100 nm polyfluorene chains

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Xi, Liang; Bird, Matthew; Mauro, Gina; Asaoka, Sadayuki; Cook, Andrew R.; Chen, Hung -Cheng; Miller, John R.

    2014-12-03

    Triplet excitons created in poly-2,7-(9,9-dihexyl)fluorene (pF) chains with end trap groups in solution are efficiently transported to and captured by the end groups. The triplets explore the entire lengths of the chains, even for ~100 nm long chains enabling determination of the completeness of end capping. The results show that the chains continuous: they may contain transient barriers or traps, such as those from fluctuations of dihedral angles, but are free of major defects that stop motion of the triplets. Quantitative determinations are aided by the addition of a strong electron donor, TMPD, which removes absorption bands of the end-trappedmore » triplets. For chains having at least one end trap, triplet capture is quantitative on the 1 µs timescale imposed by the use of the donor. Fractions of chains having no end traps were 0.15 for pF samples with anthraquinone (AQ) end traps and 0.063 with naphthylimide (NI) end traps. These determinations agreed with measurements by NMR for short (<40 polymer repeat units (PRU)) chains, where NMR determinations are accurate. The results find no evidence for traps or barriers to transport of triplets, and places limits on the possible presence of defects as impenetrable barriers to less than one per 300 PRU. The present results present a paradigm different from the current consensus, derived from observations of singlet excitons, that conjugated chains are divided into “segments,” perhaps by some kind of defects. For the present pF chains, the segmentation either does not apply to triplet excitons or is transient so that the defects are healed or surmounted in times much shorter than 1 µs. Triplets on chains without end trap groups transfer to chains with end traps on a slower time scale. Rate constants for these bimolecular triplet transfer reactions were found to increase with the length of the accepting chain, as did rate constants for triplet transfer to the chains from small molecules like biphenyl. As a result, a second set of polyfluorenes with 2-butyloctyl side chains was found to have a much lower completeness of end capping.« less

  4. Transport of triplet excitons along continuous 100 nm polyfluorene chains

    SciTech Connect (OSTI)

    Xi, Liang; Bird, Matthew; Mauro, Gina; Asaoka, Sadayuki; Cook, Andrew R.; Chen, Hung -Cheng; Miller, John R.

    2014-12-03

    Triplet excitons created in poly-2,7-(9,9-dihexyl)fluorene (pF) chains with end trap groups in solution are efficiently transported to and captured by the end groups. The triplets explore the entire lengths of the chains, even for ~100 nm long chains enabling determination of the completeness of end capping. The results show that the chains continuous: they may contain transient barriers or traps, such as those from fluctuations of dihedral angles, but are free of major defects that stop motion of the triplets. Quantitative determinations are aided by the addition of a strong electron donor, TMPD, which removes absorption bands of the end-trapped triplets. For chains having at least one end trap, triplet capture is quantitative on the 1 s timescale imposed by the use of the donor. Fractions of chains having no end traps were 0.15 for pF samples with anthraquinone (AQ) end traps and 0.063 with naphthylimide (NI) end traps. These determinations agreed with measurements by NMR for short (<40 polymer repeat units (PRU)) chains, where NMR determinations are accurate. The results find no evidence for traps or barriers to transport of triplets, and places limits on the possible presence of defects as impenetrable barriers to less than one per 300 PRU. The present results present a paradigm different from the current consensus, derived from observations of singlet excitons, that conjugated chains are divided into segments, perhaps by some kind of defects. For the present pF chains, the segmentation either does not apply to triplet excitons or is transient so that the defects are healed or surmounted in times much shorter than 1 s. Triplets on chains without end trap groups transfer to chains with end traps on a slower time scale. Rate constants for these bimolecular triplet transfer reactions were found to increase with the length of the accepting chain, as did rate constants for triplet transfer to the chains from small molecules like biphenyl. As a result, a second set of polyfluorenes with 2-butyloctyl side chains was found to have a much lower completeness of end capping.

  5. Final safety evaluation report related to the certification of the System 80+ design: Docket Number 52-002. Supplement 1

    SciTech Connect (OSTI)

    1997-05-01

    This report supplements the final safety evaluation report (FSER) for the System 80+ standard design. The FSER was issued by the US Nuclear Regulatory Commission (NRC) staff as NUREG-1462 in August 1994 to document the NRC staff`s review of the System 80+ design. The System 80+ design was submitted by Asea Brown Boveri-Combustion Engineering (ABB-CE), in accordance with the procedures of Subpart B to Part 52 of Title 10 of the Code of Federal Regulations. This supplement documents the NRC staff`s review of the changes to the System 80+ design documentation since the issuance of the FSER. ABB-CE made these changes as a result of its review of the System 80+ design details. The NRC staff concludes that the changes to the System 80+ design documentation are acceptable, and that ABB-CE`s application for design certification meets the requirements of Subpart B to 10 CFR Part 52 that are applicable and technically relevant to the System 80+ design.

  6. Sorption Behavior and Morphology of Plutonium in the Presence of Goethite at 25 and 80C

    SciTech Connect (OSTI)

    Zavarin, M; Zhao, P; Dai, Z; Carroll, S A; Kersting, A B

    2012-06-11

    In this study, we examined the sorption behavior of Pu at elevated temperatures in the presence of one relevant mineral, goethite ({alpha}-FeOOH), over a range of concentrations that span solubility-controlled to adsorption-controlled concentrations. We focused on the sorptive behavior of two common forms of Pu: aqueous Pu(IV) and intrinsic Pu(IV) nano-colloids at 25 and 80 C in a dilute pH 8 NaCl/NaHCO{sub 3} solution. The morphology of Pu sorbed to goethite was characterized using transmission electron microscopy (TEM). We examined the relative stability of PuO{sub 2} precipitates, PuO{sub 2} nano-colloids, Pu{sub 4}O{sub 7} surface precipitates, and monomeric sorbed Pu as a function of temperature and over a time scale of months.

  7. Building-related risk factors and work-related lower respiratory symptoms in 80 office buildings

    SciTech Connect (OSTI)

    Mendell, M.J.; Naco, G.M.; Wilcox, T.G.; Sieber, W.K.

    2002-01-01

    We assessed building-related risk factors for lower respiratory symptoms in office workers. The National Institute for Occupational Safety and Health in 1993 collected data during indoor environmental health investigations of workplaces. We used multivariate logistic regression analyses to assess relationships between lower respiratory symptoms in office workers and risk factors plausibly related to microbiologic contamination. Among 2,435 occupants in 80 office buildings, frequent, work-related multiple lower respiratory symptoms were strongly associated, in multivariate models, with two risk factors for microbiologic contamination: poor pan drainage under cooling coils and debris in outside air intake. Associations tended to be stronger among those with a history of physician-diagnosed asthma. These findings suggest that adverse lower respiratory health effects from indoor work environments, although unusual, may occur in relation to poorly designed or maintained ventilation systems, particularly among previously diagnosed asthmatics. These findings require confirmation in more representative buildings.

  8. Tennessee: Da Vinci Fuel-in-Oil Reduces Emissions, Wins R&D 100...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tennessee: Da Vinci Fuel-in-Oil Reduces Emissions, Wins R&D 100 Award Tennessee: Da Vinci Fuel-in-Oil Reduces Emissions, Wins R&D 100 Award August 19, 2013 - 5:07pm Addthis ...

  9. Microsoft PowerPoint - 100-K_PropPlan(de).pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of 100-KR-, KR-2 and KR-4 Operable Units Units A brief comparison of the two 100-K R di i Al i ( i h Remediation Alternatives (not counting the "No Action" Alternative) H d th...

  10. Sub-100 ps laser-driven dynamic compression of solid deuterium...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Sub-100 ps laser-driven dynamic compression of solid deuterium with a 40 J laser pulse Citation Details In-Document Search Title: Sub-100 ps laser-driven ...

  11. DOI-BLM-NV-0063-EA06-100 | Open Energy Information

    Open Energy Info (EERE)

    063-EA06-100 Jump to: navigation, search NEPA Document Collection for: DOI-BLM-NV-0063-EA06-100 EA at Jersey Valley Geothermal Area for GeothermalExploration Jersey Valley...

  12. Tennessee: Da Vinci Fuel-in-Oil Reduces Emissions, Wins R&D 100...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tennessee: Da Vinci Fuel-in-Oil Reduces Emissions, Wins R&D 100 Award Tennessee: Da Vinci Fuel-in-Oil Reduces Emissions, Wins R&D 100 Award August 19, 2013 - 5:07pm Addthis...

  13. MCA 37-43-100 Water Well Contractors | Open Energy Information

    Open Energy Info (EERE)

    Water Well Contractors Citation MCA 37-43-100 Water Well Contractors (2014). Retrieved from "http:en.openei.orgwindex.php?titleMCA37-43-100WaterWellContractors&oldid80237...

  14. Improved Dark Energy Constraints From ~ 100 New CfA Supernova...

    Office of Scientific and Technical Information (OSTI)

    Improved Dark Energy Constraints From 100 New CfA Supernova Type Ia Light Curves Citation Details In-Document Search Title: Improved Dark Energy Constraints From 100 New CfA ...

  15. PyFLOTRAN Documentation Release 1.0.0 (Technical Report) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: PyFLOTRAN Documentation Release 1.0.0 Citation Details In-Document Search Title: PyFLOTRAN Documentation Release 1.0.0 Authors: Karra, Satish 1 ; Kitay, Cory ...

  16. EERE Success Story-Kingston Creek Hydro Project Powers 100 Households...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Kingston Creek Hydro Project Powers 100 Households EERE Success Story-Kingston Creek Hydro Project Powers 100 Households August 21, 2013 - 12:00am Addthis Nevada-based contracting ...

  17. 100-OL-1 Operable Unit Pilot Study: XRF Evaluation of Select...

    Office of Scientific and Technical Information (OSTI)

    100-OL-1 Operable Unit Pilot Study: XRF Evaluation of Select Pre-Hanford Orchards Citation Details In-Document Search Title: 100-OL-1 Operable Unit Pilot Study: XRF Evaluation of...

  18. Observation of new spontaneous fission activities from elements 100 to 105

    SciTech Connect (OSTI)

    Somerville, L.P.

    1982-03-01

    Several new Spontaneous Fission (SF) activities have been found. No definite identification could be made for any of the new SF activities; however, half-lives and possible assignments to element-104 isotopes consistent with several cross bombardments include /sup 257/Rf(3.8 s, 14% SF), /sup 258/Rf(13 ms), /sup 259/Rf(approx. 3 s, 8% SF), /sup 260/Rf(approx. 20 ms), and /sup 262/Rf(approx. 50 ms). The 80-ms SF activity claimed by the Dubna group for the discovery of element 104 (/sup 260/104) was not observed. A difficulty exists in the interpretation that /sup 260/Rf is a approx. 20-ms SF activity: in order to be correct, for example, the SF activities with half-lives between 14 and 24 ms produced in the reactions 109- to 119-MeV /sup 18/O + /sup 248/Cm, 88- to 100-MeV /sup 15/N + /sup 249/Bk, and 96-MeV /sup 18/O + /sup 249/Cf must be other nuclides due to their large production cross sections, or the cross sections for production of /sup 260/Rf must be enhanced by unknown mechanisms. Based on calculated total production cross sections a possible approx. 1% electron-capture branch in /sup 258/Lr(4.5 s) to the SF emitter /sup 258/No(1.2 ms) and an upper limit of 0.05% for SF branching in /sup 254/No(55 s) were determined. Other measured half-lives from unknown nuclides produced in respective reactions include approx. 1.6 s (/sup 18/O + /sup 248/CM), indications of a approx. 47-s SF activity (75-MeV /sup 12/C + /sup 249/Cf), and two or more SF activities with 3 s less than or equal to T/sub 1/2/ less than or equal to 60 s (/sup 18/O + /sup 249/Bk). The most exciting conclusion of this work is that if the tentative assignments to even-even element 104 isotopes are correct, there would be a sudden change in the SF half-life systematics at element 104 which has been predicted theoretically and attributed to the disappearance of the second hump of the double-humped fission barrier.

  19. Remaining Sites Verification Package for the 100-B-21:2 Subsite (100-B/C Discovery Pipeline DS-100BC-002), Waste Site Reclassification Form 2008-003

    SciTech Connect (OSTI)

    J. M. Capron

    2008-06-16

    The 100-B-21:2 waste site consists of the immediate area of the DS-100BC-02 pipeline. In accordance with this evaluation, the confirmatory and verification sampling results support a reclassification of this site to Interim Closed Out. The results of verification sampling show that residual contaminant concentrations do not preclude any future uses and allow for unrestricted use of shallow zone soils. The results also demonstrate that residual contaminant concentrations are protective of groundwater and the Columbia River.

  20. United States- Land Based and Offshore Annual Average Wind Speed at 100 Meters

    Broader source: Energy.gov [DOE]

    Full-size, high resolution version of the 100-meter land-based and offshore wind speed resource map.

  1. DOE Investment Yields R&D 100 Award Winner in Energy-Efficient Lighting

    Broader source: Energy.gov [DOE]

    RTI International's nanofiber lighting improvement technology (NLITe™) has been honored with a 2011 R&D 100 Award. Established in 1963 by the editors of R&D Magazine, the annual R&D 100 Awards identify the 100 most significant, newly introduced research and development advances of the past year in multiple disciplines.

  2. Preliminary Thermal Modeling of HI-STORM 100 Storage Modules at Diablo Canyon Power Plant ISFSI

    SciTech Connect (OSTI)

    Cuta, Judith M.; Adkins, Harold E.

    2014-04-17

    Thermal analysis is being undertaken at Pacific Northwest National Laboratory (PNNL) in support of inspections of selected storage modules at various locations around the United States, as part of the Used Fuel Disposition Campaign of the U.S. Department of Energy, Office of Nuclear Energy (DOE-NE) Fuel Cycle Research and Development. This report documents pre-inspection predictions of temperatures for two modules at the Diablo Canyon Power Plant ISFSI identified as candidates for inspection. These are HI-STORM 100 modules of a site-specific design for storing PWR 17x17 fuel in MPC-32 canisters. The temperature predictions reported in this document were obtained with detailed COBRA-SFS models of these storage systems, with the following boundary conditions and assumptions. • storage module overpack configuration based on FSAR documentation of HI-STORM100S-218, Version B; due to unavailability of site-specific design data for Diablo Canyon ISFSI modules • Individual assembly and total decay heat loadings for each canister, based on at-loading values provided by PG&E, “aged” to time of inspection using ORIGEN modeling o Special Note: there is an inherent conservatism of unquantified magnitude – informally estimated as up to approximately 20% -- in the utility-supplied values for at-loading assembly decay heat values • Axial decay heat distributions based on a bounding generic profile for PWR fuel. • Axial location of beginning of fuel assumed same as WE 17x17 OFA fuel, due to unavailability of specific data for WE17x17 STD and WE 17x17 Vantage 5 fuel designs • Ambient conditions of still air at 50°F (10°C) assumed for base-case evaluations o Wind conditions at the Diablo Canyon site are unquantified, due to unavailability of site meteorological data o additional still-air evaluations performed at 70°F (21°C), 60°F (16°C), and 40°F (4°C), to cover a range of possible conditions at the time of the inspection. (Calculations were also performed at 80°F (27°C), for comparison with design basis assumptions.) All calculations are for steady-state conditions, on the assumption that the surfaces of the module that are accessible for temperature measurements during the inspection will tend to follow ambient temperature changes relatively closely. Comparisons to the results of the inspections, and post-inspection evaluations of temperature measurements obtained in the specific modules, will be documented in a separate follow-on report, to be issued in a timely manner after the inspection has been performed.

  3. Vehicle Technologies Office: R&D 100 Awards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    R&D 100 Awards Vehicle Technologies Office: R&D 100 Awards Each year, R&D Magazine's R&D 100 Awards recognizes the top 100 technology products resulting from industry, academic, and government-funded research. DOE national laboratories have received over 800 awards, which are chosen based on technical significance, uniqueness, and usefulness. Since 1985, the Vehicle Technologies Office (VTO) has received 30 R&D 100 awards. These awards highlight many of DOE national

  4. Spin-polarized electron energy loss spectroscopy on Fe(100) thin films

    Office of Scientific and Technical Information (OSTI)

    grown on Ag(100) (Journal Article) | SciTech Connect Spin-polarized electron energy loss spectroscopy on Fe(100) thin films grown on Ag(100) Citation Details In-Document Search Title: Spin-polarized electron energy loss spectroscopy on Fe(100) thin films grown on Ag(100) Authors: Komesu, Takashi ; Waddill, G. D. ; Tobin, J. G. [1] ; MUST) [2] + Show Author Affiliations LLNL ( Publication Date: 2015-10-15 OSTI Identifier: 1223970 Resource Type: Journal Article Resource Relation: Journal Name:

  5. Jefferson Lab News - JLab FEL Wins R&D 100 Award | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    JLab FEL Wins R&D 100 Award JLab FEL Wins R&D 100 Award July 26, 2005 Researchers and engineers at the Department of Energy's (DOE) Thomas Jefferson National Accelerator Facility (Jefferson Lab) have been awarded an R&D 100 Award, R&D Magazine's picks for the 100 most technologically significant new products of 2005. This is Jefferson Lab's second R&D 100 award. The 2005 award goes to: The Tunable Energy Recovered High Power Infrared Free-Electron Laser, lead by a team of

  6. Assessment of Hexavalent Chromium Natural Attenuation for the Hanford Site 100 Area

    SciTech Connect (OSTI)

    Truex, Michael J.; Szecsody, James E.; Qafoku, Nikolla P.; Sahajpal, Rahul; Zhong, Lirong; Lawter, Amanda R.; Lee, Brady D.

    2015-09-01

    Hexavalent chromium (Cr(VI)) plumes are present in the 100 Area at the Hanford Site. Remediation efforts are under way with objectives of restoring the groundwater to meet the drinking-water standard (48 µg/L) and protecting the Columbia River by ensuring that discharge of groundwater to the river is below the surface-water quality standard (10 µg/L). Current remedies include application of Pump-and-Treat (P&T) at the 100-D, 100-H, and 100-K Areas and Monitored Natural Attenuation (MNA) at the 100-F/IU Area. Remedy selection is still under way at the other 100 Areas. Additional information about the natural attenuation processes for Cr(VI) is important in all of these cases. In this study, laboratory experiments were conducted to demonstrate and quantify natural attenuation mechanisms using 100 Area sediments and groundwater conditions.

  7. Electron-impact excitation of xenon at incident energies between 15 and 80 eV

    SciTech Connect (OSTI)

    Filipovic-acute-accent, D.; Marinkovic-acute-accent, B.; Pejcev, V.; Vuskovic-acute-accent, a.L.

    1988-01-15

    Normalized, absolute differential cross sections (DCS's) have been measured for the 20 lowest electronic states of xenon. Incident electron energies were 15, 20, 30, and 80 eV and the scattering angles ranged from 5/sup 0/ to 150/sup 0/. The energy resolution was 40 meV. Absolute elastic DCS's have been obtained by normalizing the relative values to the recently published absolute elastic DCS's by Register et al. (J. Phys. B 19, 1685 (1986)). Elastic-to-inelastic intensity ratios, at different incident energies for the 6s((3/2)/sub 1/ state were determined. These ratios were utilized as secondary standards to establish the absolute scale for the other inelastic processes in accordance with intensity ratios of lines in energy-loss spectra. The absolute inelastic DCS's were extrapolated to 0/sup 0/ and 180/sup 0/ and integrated to yield the integral cross sections (ICS's). A comparison of the present DCS's with the only available measurements at 20 eV impact energy shows satisfactory agreement in shape but considerable difference in absolute value.

  8. EXOPLANETS FROM THE ARCTIC: THE FIRST WIDE-FIELD SURVEY AT 80 Degree-Sign N

    SciTech Connect (OSTI)

    Law, Nicholas M.; Sivanandam, Suresh; Carlberg, Raymond; Salbi, Pegah; Ngan, Wai-Hin Wayne; Kerzendorf, Wolfgang; Ahmadi, Aida; Steinbring, Eric; Murowinski, Richard

    2013-03-15

    Located within 10 Degree-Sign of the North Pole, northern Ellesmere Island offers continuous darkness in the winter months. This capability can greatly enhance the detection efficiency of planetary transit surveys and other time domain astronomy programs. We deployed two wide-field cameras at 80 Degree-Sign N, near Eureka, Nunavut, for a 152 hr observing campaign in 2012 February. The 16 megapixel camera systems were based on commercial f/1.2 lenses with 70 mm and 42 mm apertures, and they continuously imaged 504 and 1295 deg{sup 2}, respectively. In total, the cameras took over 44,000 images and produced better than 1% precision light curves for approximately 10,000 stars. We describe a new high-speed astrometric and photometric data reduction pipeline designed for the systems, test several methods for the precision flat fielding of images from very-wide-angle cameras, and evaluate the cameras' image qualities. We achieved a scintillation-limited photometric precision of 1%-2% in each 10 s exposure. Binning the short exposures into 10 minute chunks provided a photometric stability of 2-3 mmag, sufficient for the detection of transiting exoplanets around the bright stars targeted by our survey. We estimate that the cameras, when operated over the full Arctic winter, will be capable of discovering several transiting exoplanets around bright (m{sub V} < 9.5) stars.

  9. Obama-Biden Administration Announces Nearly $80.7 Million in Weatherization Funding and Energy Efficiency Grants for Oregon

    Broader source: Energy.gov [DOE]

    Part of nearly $8 billion in Recovery Act funding for energy efficiency efforts nationwide that will create 100,000 jobs and cut energy bills for families

  10. Interaction between S100P and the anti-allergy drug cromolyn

    SciTech Connect (OSTI)

    Penumutchu, Srinivasa R.; Chou, Ruey-Hwang; Yu, Chin

    2014-11-21

    Highlights: The interaction between S100Pcromolyn was investigated by fluorescence spectroscopy. The interfacial residues on S100P and cromolyn contact surface were mapped by {sup 1}H-{sup 15}N HSQC experiments. S100Pcromolyn complex model was generated from NMR restraints using HADDOCK program. The stability of the S100Pcromolyn complex was studied using molecular dynamics simulations. - Abstract: The S100P protein has been known to mediate cell proliferation by binding the receptor for advanced glycation end products (RAGE) to activate signaling pathways, such as the extracellular regulated kinase (ERK) and nuclear factor kappa-light-chain-enhancer of activated B cells (NF-?B) pathways. S100P/RAGE signaling is involved in a variety of diseases, such as cancer, metastasis, and diabetes. Cromolyn is an anti-allergy drug that binds S100P to block the interaction between S100P and RAGE. In the present study, we characterized the properties of the binding between cromolyn and calcium-bound S100P using various biophysical techniques. The binding affinity for S100P and cromolyn was measured to be in the millimolar range by fluorescence spectroscopy. NMR-HSQC titration experiments and HADDOCK modeling was employed to determine the spatial structure of the proposed heterotetramer model of the S100Pcromolyn complex. Additional MD simulation results revealed the important properties in the complex stability and conformational flexibility of the S100Pcromolyn complex. This proposed model has provided an understanding of the molecular level interactions of S100Pcromolyn complex.

  11. Strain-Based Design Methodology of Large Diameter Grade X80 Linepipe

    SciTech Connect (OSTI)

    Lower, Mark D.

    2014-04-01

    Continuous growth in energy demand is driving oil and natural gas production to areas that are often located far from major markets where the terrain is prone to earthquakes, landslides, and other types of ground motion. Transmission pipelines that cross this type of terrain can experience large longitudinal strains and plastic circumferential elongation as the pipeline experiences alignment changes resulting from differential ground movement. Such displacements can potentially impact pipeline safety by adversely affecting structural capacity and leak tight integrity of the linepipe steel. Planning for new long-distance transmission pipelines usually involves consideration of higher strength linepipe steels because their use allows pipeline operators to reduce the overall cost of pipeline construction and increase pipeline throughput by increasing the operating pressure. The design trend for new pipelines in areas prone to ground movement has evolved over the last 10 years from a stress-based design approach to a strain-based design (SBD) approach to further realize the cost benefits from using higher strength linepipe steels. This report presents an overview of SBD for pipelines subjected to large longitudinal strain and high internal pressure with emphasis on the tensile strain capacity of high-strength microalloyed linepipe steel. The technical basis for this report involved engineering analysis and examination of the mechanical behavior of Grade X80 linepipe steel in both the longitudinal and circumferential directions. Testing was conducted to assess effects on material processing including as-rolled, expanded, and heat treatment processing intended to simulate coating application. Elastic-plastic and low-cycle fatigue analyses were also performed with varying internal pressures. Proposed SBD models discussed in this report are based on classical plasticity theory and account for material anisotropy, triaxial strain, and microstructural damage effects developed from test data. The results are intended to enhance SBD and analysis methods for producing safe and cost effective pipelines capable of accommodating large plastic strains in seismically active arctic areas.

  12. Thermal performance measurements of a 100 percent polyester MLI (multilayer insulation) system for the Superconducting Super Collider

    SciTech Connect (OSTI)

    Boroski, W.N.; Gonczy, J.D.; Niemann, R.C.

    1989-09-01

    Thermal performance measurements of a 100 percent polyester multilayer insulation (MLI) system for the Superconducting Super Collider (SSC) were conducted in a Heat Leak Test Facility (HLTF) under three experimental test arrangements. Each experiment measured the thermal performance of a 32-layer MLI blanket instrumented with twenty foil sensors to measure interstitial layer temperatures. Heat leak values and sensor temperatures were monitored during transient and steady state conditions under both design and degraded insulating vacuums. Heat leak values were measured using a heatmeter. MLI interstitial layer temperatures were measured using Cryogenic Linear Temperature Sensors (CLTS). Platinum resistors monitored system temperatures. High vacuum was measured using ion gauges; degraded vacuum employed thermocouple gauges. A four-wire system monitored instrumentation sensors and calibration heaters. An on-line computerized data acquisition system recorded and processes data. This paper reports on the instrumentation and experimental preparation used in carrying out these measurements. In complement with this paper is an associate paper bearing the same title head, but with the title extension Part 2: Laboratory results (300K--80K). 13 refs., 7 figs.

  13. SAF100

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  14. Section 100

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ,500 cm &1 1.89 cm &1 Session Papers 451 Spectral Resolution Effects on Solar Irradiance Calculations H. E. Snell Atmospheric and Environmental Research, Inc. Cambridge, Massachusetts G. P. Anderson Geophysics Directorate, Phillips Laboratory Hanscom Air Force Base, Massachusetts A. Berk, P. Acharya and L. Bernstein Spectral Sciences, Inc. Burlington, Massachusetts Abstract For this study, we compared the spectral and integrated irradi- ance computed by high-resolution and

  15. Energy Markets Outlook

    U.S. Energy Information Administration (EIA) Indexed Site

    Energy Markets Outlook For National Association for Business Economics March 7, 2016 | Washington, D.C. By Adam Sieminski, Administrator Forecast -3 -2 -1 0 1 2 3 4 5 6 82 84 86 88 90 92 94 96 98 100 2011-Q1 2012-Q1 2013-Q1 2014-Q1 2015-Q1 2016-Q1 2017-Q1 Implied stock change and balance (right axis) World production (left axis) World consumption (left axis) world supply and demand million barrels per day implied stock change million barrels per day Global oil inventories are forecast to

  16. F.O.B. Costs of Imported Crude Oil by API Gravity

    Gasoline and Diesel Fuel Update (EIA)

    Energy Markets Outlook For National Association for Business Economics March 7, 2016 | Washington, D.C. By Adam Sieminski, Administrator Forecast -3 -2 -1 0 1 2 3 4 5 6 82 84 86 88 90 92 94 96 98 100 2011-Q1 2012-Q1 2013-Q1 2014-Q1 2015-Q1 2016-Q1 2017-Q1 Implied stock change and balance (right axis) World production (left axis) World consumption (left axis) world supply and demand million barrels per day implied stock change million barrels per day Global oil inventories are forecast to

  17. Atomic and electronic structures of SrTiO3/GaAs heterointerfaces: An 80-kV atomic-resolution electron energy-loss spectroscopy study

    SciTech Connect (OSTI)

    Qiao, Q.; Klie, Robert F; Ogut, Serdar; Idrobo Tapia, Juan C

    2012-01-01

    We have examined the atomic and electronic structures of epitaxially grown, ultrathin SrTiO{sub 3} (100) films on GaAs (001) using 80-kV aberration-corrected atomic-resolution Z-contrast imaging and electron energy-loss spectroscopy (EELS) to develop a fundamental understanding of the interfacial structure-property relationships. We find that the interface is atomically abrupt and no surface reconstruction of the GaAs (001) surface is observed. Using atomic-column resolved EELS, we examine the oxygen vacancy and Ti concentrations in the SrTiO{sub 3} film and across the heterointerface. We show that Ti diffuses into the first few monolayers of GaAs. Using a combination of EELS and first-principles calculations, we present evidence for the formation of As oxides at the interface depending on the thin-film growth conditions. These findings are used to explain the differences in the transport behavior of the films.

  18. Design and calibration of a test facility for MLI thermal performance measurements below 80K. [Multilayer insulation (MLI)

    SciTech Connect (OSTI)

    Boroski, W.; Kunzelman, R.; Ruschman, M.; Schoo, C.

    1992-04-01

    The design geometry of the SSC dipole cryostat includes active thermal radiation shields operating at 80K and 20K respectively. Extensive measurements conducted in a Heat Leak Test Facility (HLTF) have been used to evaluate the thermal performance of candidate multilayer insulation (MLI) systems for the 80K thermal shield, with the present system design based upon those measurement results. With the 80K MLI geometry established, efforts have focused on measuring the performance of MLI systems near 20K. A redesign of the HLTF has produced a measurement facility capable of conducting measurements with the warm boundary fixed at 80K and the cold boundary variable from 10K to 50K. Removing the 80K shield permits measurements with a warm boundary at 300K. The 80K boundary consists of a copper shield thermally anchored to a liquid nitrogen reservoir. The cold boundary consists of a copper anchor plate whose temperature is varied through boil-off gas from a 500 liter helium supply dewar. A transfer line heat exchanger supplies the boil-off gas to the anchor plate at a constant and controlled rate. The gas, which serves as cooling gas, is routed through a copper cooling tube soldered into the anchor plate. Varying the cooling gas flow rate varies the amount of refrigeration supplied to the anchor plate, thereby determining the plate temperature. A resistance heater installed on the anchor plate is regulated by a cryogenic temperature controller to provide final temperature control. Heat leak values are measured using a heatmeter which senses heat flow as a temperature gradient across a fixed thermal impedance. Since the thermal conductivity of the thermal impedance changes with temperature, the heatmeter is calibrated at key cold boundary temperatures. Thus, the system is capable of obtaining measurement data under a variety of system conditions. 7 refs.

  19. NETL Innovations Recognized with R&D 100 Awards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NETL Innovations Recognized with R&D 100 Awards NETL Innovations Recognized with R&D 100 Awards July 9, 2013 - 11:02am Addthis Washington, DC - Two technologies advanced by the Office of Fossil Energy's National Energy Technology Laboratory (NETL) in collaboration with strategic partners have been recognized by R&D Magazine as among the 100 most technologically significant products introduced into the commercial marketplace within the past year. This year's awards recognize NETL's

  20. DOE Awards $100 Million for Innovative Energy Research | U.S. DOE Office of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science (SC) Awards $100 Million for Innovative Energy Research Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events EFRC News EFRC Events DOE Announcements Publications History Contact BES Home 06.18.14 DOE Awards $100 Million for Innovative Energy Research Print Text Size: A A A Subscribe FeedbackShare Page 06.18.14 :: U.S. Energy Secretary Ernest Moniz today announced the awarding of $100 million for Energy Frontier Research Centers

  1. Excellence in Bioenergy Innovation-A Presentation of 2015 R&D 100 Award

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Winning Projects | Department of Energy Excellence in Bioenergy Innovation-A Presentation of 2015 R&D 100 Award Winning Projects Excellence in Bioenergy Innovation-A Presentation of 2015 R&D 100 Award Winning Projects PDF icon rd100_winners_webinar_20160121.pdf More Documents & Publications Whole Algae Hydrothermal Liquefaction Technology Pathway Whole Algae Hydrothermal Liquefaction Thermochemical Conversion Proceeses to Aviation Fuels

  2. Measurements of structural and chemical order in Zr80Pt20 and Zr77Rh23 liquids

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Johnson, M. L.; Blodgett, M. E.; Lokshin, K. A.; Mauro, N. A.; Neuefeind, J.; Pueblo, C.; Quirinale, D. G.; Vogt, A. J.; Egami, T.; Goldman, A. I.; et al

    2016-02-03

    In this study, the short-range order (SRO) and medium-range order of electrostatically levitated Zr80Pt20 and Zr77Rh23 liquids are presented founded on a combination of high-energy x-ray diffraction and time-of-flight neutron diffraction studies. The atomic structures of the Zr80Pt20 liquids were determined as a function of temperature from constrained reverse Monte Carlo simulations using x-ray and elastic neutron scattering measurements and two partial pair-distribution functions obtained from molecular dynamics (MD) simulations.

  3. January 22, 2014 in 100E Hildebrand Hall | Center for GasSeparationsR...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    January 22, 2014 in 100E Hildebrand Hall Previous Next List Miguel Gonzalez (Dept. of Chemistry, UC Berkeley) Designing Metal-Organic Frameworks for Catalysis Richard Martin...

  4. Issue framework for potential 100-N advice (lead Issue Manager: Engstrom

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    framework for potential 100-N advice (lead Issue Manager: Engstrom) Background information The 100-N area is the last of the 100 Area, River Corridor, RI/FS and Proposed Plans for submittal. The 100-N area consists of two Decision Units, NR-1, which is the source unit, and NR-2, the groundwater unit. There are 234 facilities, of which 76% have been demolished, and there are 175 waste sites and four RCRA TSD sites. Of these waste sites, 18 have been cleaned up and 78 have been scheduled for start

  5. Breakthrough EERE National Laboratory Inventions Take Home Nine R&D 100

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Awards | Department of Energy EERE National Laboratory Inventions Take Home Nine R&D 100 Awards Breakthrough EERE National Laboratory Inventions Take Home Nine R&D 100 Awards December 10, 2015 - 9:41am Addthis Breakthrough EERE National Laboratory Inventions Take Home Nine R&D 100 Awards David Danielson David Danielson Assistant Secretary for Energy Efficiency and Renewable Energy The 53rd R&D 100 Awards ceremony took place recently in Las Vegas, Nevada. Going all the way

  6. June 24, 2015 in 100E Hildebrand Hall | Center for Gas SeparationsRele...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4, 2015 in 100E Hildebrand Hall Previous Next List Stephen Meckler (Lawrence Berkeley National Laboratory) Layered Zif-Polymer Composites Accessed through Metal Oxide Precursors...

  7. S M Stoller Star Center-B100 Monthly/Effluent; Largo, FL

    Office of Legacy Management (LM)

    7 Section 5: GCMS Volatiles - QC Data Summaries ......Sample Summary S M Stoller Job No: F35493 Star Center-B100 MonthlyEffluent; Largo, FL ...

  8. S M Stoller Star Center-B100 Monthly/Effluent; Largo, FL

    Office of Legacy Management (LM)

    7 Section 5: GCMS Volatiles - QC Data Summaries ......Sample Summary S M Stoller Job No: F29123 Star Center-B100 MonthlyEffluent; Largo, FL ...

  9. New Jersey: EERE-Supported Technology Lowers GHG Emissions 70%, Wins R&D 100 Award

    Office of Energy Efficiency and Renewable Energy (EERE)

    R&D 100 Award-winning technology helps reduce greenhouse gas emissions in cement and concrete products up to 70%.

  10. DOE Awards $100 Million for Innovative Energy Research | U.S...

    Office of Science (SC) Website

    Awards 100 Million for Innovative Energy Research Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events EFRC News EFRC Events DOE ...

  11. Microsoft Word - TX-100 Final Report - SAND2007-6066.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Manager: Tom Ashwill Abstract This report details the work completed under the TX-100 blade manufacturing portion of the Carbon-Hybrid Blade Developments: Standard and...

  12. Microsoft Word - CX-100 Final Report - SAND2007-6065.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Manager: Tom Ashwill Abstract This report details the work completed under the CX-100 blade manufacturing project. It presents the tooling design and manufacturing, blade...

  13. MHK ISDB/Instruments/AIRMAR 100WX Weather Station | Open Energy...

    Open Energy Info (EERE)

    100WX Weather Station < MHK ISDB Jump to: navigation, search MHK Instrumentation & Sensor Database Menu Home Search Add Instrument Add Sensor Add Company Community FAQ Help...

  14. Wastewater treatment: Chemical industry. January 1980-March 1992 (Citations from the NTIS Data Base). Rept. for Jan 80-Mar 92

    SciTech Connect (OSTI)

    Not Available

    1992-02-01

    The bibliography contains citations concerning wastewater treatment in the chemical industry relative to a wide variety of industrial pollutants. Biological treatments including carbon additives are described relative to effectiveness. The removal of mercury and its compounds are included, as well as associated problems and recommendations from fertilizer and pesticide pollution. (Contains 80 citations with title list and subject index.)

  15. Advanced light water reactor plants System 80+{trademark} design certification program. Annual progress report, October 1, 1994--September 30, 1995

    SciTech Connect (OSTI)

    1998-09-01

    The purpose of this report is to provide the status of the progress that was made towards Design Certification of System 80+{trademark} during the US government`s 1995 fiscal year. The System 80+ Advanced Light Water Reactor (ALWR) is a 3931 MW (1350 MWe) Pressurized Water Reactor (PWR). The design covers an essentially complete plant. It is based on EPRI ALWR Utility Requirements Document (URD) improvements to the Standardized System 80 Nuclear Steam Supply System (NSSS) in operation at Palo Verde Units 1, 2, and 3. The NSSS is a traditional two-loop arrangement with two steam generators, two hot legs and four cold legs, each with a reactor coolant pump. The System 80+ standard design houses the NSSS in a spherical steel containment vessel which is enclosed in a concrete shield building, thus providing the safety advantages of a dual barrier to radioactivity release. Other major features include an all-digital, human-factors-engineered control room, an alternate electrical AC power source, an In-Containment Refueling Water Storage Tank (IRWST), and plant arrangements providing complete separation of redundant trains in safety systems.

  16. Advanced light water reactor plants System 80+{trademark} design certification program. Annual progress report, October 1, 1995--September 30, 1996

    SciTech Connect (OSTI)

    1996-12-31

    The purpose of this report is to provide a status of the progress that was made towards Design Certification of System 80+{trademark} during the US government`s 1996 fiscal year. The System 80+ Advanced Light Water Reactor (ALWR) is a 3931 MW (1350 MWe) Pressurized Water Reactor (PWR). The design covers an essentially complete plant. It is based on EPRI ALWR Utility Requirements Document (URD) improvements to the Standardized System 80 Nuclear Steam Supply System (NSSS) in operation at Palo Verde Units 1, 2 and 3. The NSSS is a traditional two-loop arrangement with two steam generators, two hot legs and four cold legs, each with a reactor coolant pump. The System 80+ standard design houses the NSSS in a spherical steel containment vessel which is enclosed in a concrete shield building, thus providing the safety advantages of a dual barrier to radioactivity release. Other major features include an all-digital, human-factors-engineered control room, an alternate electrical AC power source, an In-Containment Refueling Water Storage Tank (IRWST), and plant arrangements providing complete separation of redundant trains in safety systems.

  17. SU-E-I-80: Beta-Minus Emitting Radiotracers Improves Molecular Endoscopy

    SciTech Connect (OSTI)

    Carpenter, C; Ma, X; Sun, C; Pratx, G; Cheng, Z; Xing, L

    2014-06-01

    Purpose: Molecular Endoscopy using Cerenkov Luminescence can be used to monitor the distribution of many clinically-available PET and SPECT probes for endoscopic applications. A main limitation of Cerenkov is its limited sensitivity to small concentrations of radiotracer when using light guides s. Herein we demonstrate that the use of a high energy beta emitting radioisotope, exemplified here with 90Y provides superior sensitivity to 18F because of its higher light output and its lack of corresponding gamma emission. Methods: A series of phantom experiments were performed to compare the sensitivity and noise of the CLE system for imaging 90Y and 18F. Three vials of known concentrations of 90Y (0.008 ?Ci, 0.08 ?Ci, 1 ?Ci) were placed in centrifuge tubes and isolated from each other. One vial of 18F (100 ?Ci) was placed in the imaging chamber and imaged over the course of decay (19 hours, 43 minutes, or ?10 half-lives). Image time-points were formed from 5-minute integrations. Results: Using an SNR of 10 to define the noise-floor, the 90Y minimum detectable activity was 0.056 ?Ci. To the contrast, the minimum detectable activity for 18F was 11.63 ?Ci. These data demonstrate a 207-fold improvement in SNR of 90Y compared to 18F, when controlled for activity. Conclusion: This study demonstrated that a pure ?- radionuclide such as 90Y be used is superior to 18F for Cerenkov Endoscopy. Further study is needed to demonstrate its utility in preclinical studies, endoscopic applications, intraoperative, and radiotherapy applications.

  18. 100Gbps Science Network | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    100Gbps Science Network Advanced Scientific Computing Research (ASCR) ASCR Home About Research Facilities Science Highlights Benefits of ASCR Funding Opportunities Advanced Scientific Computing Advisory Committee (ASCAC) Community Resources ASCR Discovery Monthly News Roundup News Archives ASCR Program Documents ASCR Workshops and Conferences ASCR Presentations 100Gbps Science Network Related Links Contact Information Advanced Scientific Computing Research U.S. Department of Energy

  19. 189,"Alabama Electric Coop Inc",1,"Lowman","Chatom",100,19.94...

    U.S. Energy Information Administration (EIA) Indexed Site

    ... 1015,"Austin City of",48,"Hamilton","Summits",100,1.18,"OH","AC",138,138,795,"ACSR Drake","Double",2,2,"Steel Tower",480 1015,"Austin City of",49,"Hamilton","Williamsn",100,4.21,"O...

  20. 189,"Alabama Electric Coop Inc",1,"Lowman","Chatom",100,19.94...

    U.S. Energy Information Administration (EIA) Indexed Site

    ... 1015,"Austin City of",48,"Hamilton","Summits",100,1.18,"OH","AC",138,138,795,"ACSR Drake","Double",2,1,"Steel Tower",480 1015,"Austin City of",49,"Hamilton","Williamsn",100,4.21,"O...

  1. EPACT Representation for Covered Awards Over $100,000 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy EPACT Representation for Covered Awards Over $100,000 EPACT Representation for Covered Awards Over $100,000 PDF icon EPACT Representation More Documents & Publications 2007 Annual Plan 2007 Annual Plan for the Ultra-Deepwater and Unconventional Natural Gas and Other Petroleum Resources Research and Development Program 2008 Annual Plan

  2. Targeting 100! Advanced Energy Efficient Building Technologies for High Performance Hospitals: Executive Summary.

    SciTech Connect (OSTI)

    Burpee, Heather; Loveland, Joel; Helmers, Aaron

    2015-09-02

    This research, Targeting 100!, provides a conceptual framework and decision-making structure at a schematic design level of precision for hospital owners, architects and engineers to radically reduce energy use in hospitals. Following the goals of Architecture 2030 and The 2030 Challenge, it offers access to design strategies and the cost implications of those strategies for new hospitals to utilize 60% less energy. The name, Targeting 100!, comes from the 2030 Challenge energy reduction goal for hospitals; a 60% energy use reduction from typical acute care hospital targets approximately 100 KBtu/SF Year, thus the name Targeting 100!. Targeting 100! was developed through funding partnerships with the US Department of Energy and the Northwest Energy Efficiencys BetterBricks Initiative. The technical team was led by the University of Washington Integrated Design Lab supported by deep collaboration with Solarc Architecture and Engineering, TBD Cost Consultants, and NBBJ Architecture. Through extensive research and design development, Targeting 100! provides a framework for developing high performance healthcare projects today and into the future. An online tool houses a Targeting 100! knowlegebase and roadmap. It can be accessed at: www.idlseattle.com/t100. The webtool is structured from high-level overview materials to detailed library with modeling inputs and outputs, providing a comprehensive report of the background, data, and outcomes from the project.

  3. 100-N Area Decision Unit Target Analyte List Development for Soil

    SciTech Connect (OSTI)

    Ovink, R.

    2012-09-18

    This report documents the process used to identify source area target analytes in support of the 100-N Area remedial investigation/feasibility study (RI/FS) addendum to the Integrated 100 Area Remedial Investigation/Feasibility Study Work Plan (DOE/RL-2008-46, Rev. 0).

  4. Strain relief and Pd island shape evolution on the palladium and palladium hydride (100) surface

    SciTech Connect (OSTI)

    Kolesnikov, S. V.; Klavsyuk, A. L.; Saletsky, A. M. [Moscow State University (Russian Federation)

    2012-06-15

    The mesoscopic relaxation of small Pd islands on Pd(100) and PdH(100) surfaces is investigated on the atomic scale by performing molecular statics calculations. A strong strain and stress inhomogeneity in islands and topmost layers of the substrate is revealed. An unusual size dependence of the shape of islands is discovered.

  5. Derivation of Building Energy Use Intensity Targets for ASHRAE Standard 100

    SciTech Connect (OSTI)

    Sharp, Terry R

    2014-06-01

    The steps to develop the building energy use intensity targets for American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) Standard 100, Energy Efficiency in Existing Buildings are outlined in this report. The analyses were conducted by Oak Ridge National Laboratory (ORNL) in collaboration with the ASHRAE Standard 100 committee and Dr. Alexander Zhivov, the subcommittee chair responsible for targets development.

  6. STIMULUS: End-System Network Interface Controller for 100 Gb/s Wide Area Networks

    SciTech Connect (OSTI)

    Zarkesh-Ha, Payman

    2014-09-12

    The main goal of this research grant is to develop a system-level solution leveraging novel technologies that enable network communications at 100 Gb/s or beyond. University of New Mexico in collaboration with Acadia Optronics LLC has been working on this project to develop the 100 Gb/s Network Interface Controller (NIC) under this Department of Energy (DOE) grant.

  7. Imaging of magnetic DW injection processed in patterened Ni80Fe20 structures

    SciTech Connect (OSTI)

    Bryan, M. T.; Basu, S.; Fry, P. W.; Schrefl, T.; Gibbs, M.R.J.; Allwood, D. A.; Im, M.-Y.; Fischer, P.

    2009-03-23

    Magnetization reversal in patterned ferromagnetic nanowires usually occurs via domain wall (DW) nucleation and propagation from one end (or both ends) of the wire which can be significantly reduced by a large, magnetically soft pad on one of the wire ends. These 'nucleation pads' reverse at lower fields than an isolated nanowire and introduce a DW to the wire from the wire end attached to the pad. Once a critical 'injection' field is reached, the DW sweeps through the wire, reversing its magnetization. Nucleation pads are frequently used as part of nanowire devices and experimental structures. Magnetic-field-driven shift register memory can include an injection pad to write data while those attached to nanowire spiral turn sensors act as both a source and sink of domain walls. Both of these devices use two-dimensional wire circuits and therefore require the use of orthogonal in-plane magnetic fields to drive domain walls through wires of different orientations. These bi-axial fields can significantly alter the fields at which DW injection occurs and control the number of different injection modes. We have used magnetic transmission soft X-ray microscopy (M-TXM) [6] providing 25nm spatial resolution to image the evolution of magnetization configurations in patterned 24nm thick Ni{sub 80}Fe{sub 20} rectangular nucleation pads and attached wires during DW injection. The structures consisted of 2 {micro}m x 3 {micro}m nucleation pads with wires of width 200 nm, 300 nm or 500 nm attached Comparing the magnetic configuration of the injection pads with micromagnetic models, we find that the relative orientation of closure domains in the remanent magnetization configuration of injection pads determines the reversal pathway that follows, although this is further affected by applied transverse fields. Micromagnetic simulations were performed using a hybrid finite element/boundary element code. The magnetic elements were designed with 20 nm thickness and discretized into a mesh of tetrahedral elements with a maximum cell size of 20 nm. Material properties for bulk permalloy were used, i.e. exchange stiffness A = 1.3 x 10{sup -11} J/m, saturation magnetization M{sub S} = 800 kA/m, magneto-crystalline anisotropy K = 0 Jm{sup -3}, damping constant a = 0.01. A linearly increasing magnetic field (1 Oe/ns) was applied parallel to the wire long axis to simulate switching fields. The dimensions of the simulated structures mimicked the essential features of the experimental structures, although edge roughness was neglected from the model. The remanent magnetization state of the pad with no transverse field consists of a uniform magnetization aligned with the wire axis, with closure domains at the edges facing and joining the wire. When H{sub y} = 0 Oe and H{sub x} = 20 Oe, the magnetization state of the pad buckles, forming eight domains, half of which have magnetizations rotated away from the x-axis. As H{sub x} is increased, the rotation of the domains become larger and the non-rotated domains shrink A transverse field applied in addition to the axial field exhibits a more complex modes of magnetization reversal in the pad (Fig. 1). We understand the pathway of pad magnetization more generally by using micromagnetic simulations. Two initial configurations are shown in Fig. 2 with the closure domain on the left-hand edge of the pad either parallel or anti-parallel to both closure domains on the righthand edges of the pad. As H{sub x} is increased to inject a domain wall, the pad magnetization states changed to vortex states, as observed by M-TXM. At higher fields, the magnetization of the modeled pad became single-domain, although closure domains remained at fields up to H{sub x} = 90 Oe. This supports the suggestion that experimentally observed multi-modal injection is due to the magnetization state of the pad. In summary, the relative orientation of closure domains in the pads determines the magnetization reversal pathway under an axial field. However, the addition of transverse fields can alter these and lead to the pads undergoing reversal under lower axial fields. Our observations have wider implications for experiments and devices using patterned magnetic wires.

  8. Why did they blow up 100 tons of TNT before the Trinity Test?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Why did they blow up 100 tons of TNT before the Trinity Test? At the Bradbury Latest Issue:May 2016 all issues All Issues » submit Why did they blow up 100 tons of TNT before the Trinity Test? Science question of the month May 1, 2016 Sometimes people ask us a question and we try to answer them How do you calibrate instruments for a test that's never been done before? Great question. The 100-ton test was performed before the Trinity test to calibrate instruments prepared to explore the expected

  9. BETO Director Ranks #6 in Biofuels Digest's Top 100 People in the

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Bioeconomy | Department of Energy Director Ranks #6 in Biofuels Digest's Top 100 People in the Advanced Bioeconomy BETO Director Ranks #6 in Biofuels Digest's Top 100 People in the Advanced Bioeconomy February 4, 2016 - 3:24pm Addthis Biofuels Digest has released its 2016 ranking of the "Top 100 People in the Advanced Bioeconomy," and Bioenergy Technologies Office (BETO) Director Dr. Jonathan Male is ranked high in the list at number six. Sharing this prestigious spot with

  10. BETO-Funded Invention Wins R&D 100 Award | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Invention Wins R&D 100 Award BETO-Funded Invention Wins R&D 100 Award July 23, 2014 - 1:39pm Addthis Oak Ridge National Laboratory (ORNL) researchers won an R&D Magazine R&D 100 award this month for their Bioenergy Technologies Office-funded invention of a new class of membranes that could help reduce the price of bio-ethanol, ethanol-gasoline blend fuels, and drop-in fuels from bio-oil processing. The super-hydro-tunable HiPAS membranes act as an energy-efficient alternative to

  11. DOE to Award $100 Million for Energy Frontier Research Centers | U.S. DOE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Office of Science (SC) to Award $100 Million for Energy Frontier Research Centers Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events EFRC News EFRC Events DOE Announcements Publications History Contact BES Home 09.30.13 DOE to Award $100 Million for Energy Frontier Research Centers Print Text Size: A A A Subscribe FeedbackShare Page 09.30.13 :: U.S. Energy Secretary Ernest Moniz today announced a proposed $100 million in FY2014 funding

  12. Vehicle Technologies Office's Research Recognized by R&D 100 Awards |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Vehicle Technologies Office's Research Recognized by R&D 100 Awards Vehicle Technologies Office's Research Recognized by R&D 100 Awards July 17, 2014 - 12:12pm Addthis R&D Magazine recently recognized four technologies supported by the Vehicle Technologies Office as some of the most significant products introduced in the marketplace over the last year. The R&D 100 Awards, sometimes called the "Oscars of Innovation," recognize industry, academic,

  13. NREL Survey Shows Dramatic Improvement in B100 Biodiesel Quality - News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Releases | NREL Survey Shows Dramatic Improvement in B100 Biodiesel Quality April 15, 2013 The latest national survey of 100% biodiesel (B100) "blend stock" samples by the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) found that 95% of the samples from 2011-12 met ASTM International fuel quality specifications. The ASTM standards serve as guidelines for industry and are designed to ensure quality at the pump for consumers - along with reliable operation of

  14. NREL to Receive R & D 100 Awards at Annual Awards Ceremony - News Releases

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | NREL to Receive R & D 100 Awards at Annual Awards Ceremony October 19, 2005 Golden, Colo. - The U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) will receive two R&D 100 awards during a black tie awards ceremony hosted by Research & Development (R&D) Magazine on Oct. 20 at Chicago's Navy Pier. The Laboratory's R&D 100 Awards for 2005 are for an energy modeling software that determines building energy consumption and cost effective energy

  15. Nuclear facility licensing, documentaion, and reviews, and the SP-100 test site experience

    SciTech Connect (OSTI)

    Cornwell, B.C.; Deobald, T.L.; Bitten, E.J.

    1991-06-01

    The required approvals and permits to test a nuclear facility are extensive. Numerous regulatory requirements result in the preparation of documentation to support the approval process. The principal regulations for the SP-100 Ground Engineering System (GES) include the National Environmental Policy Act, Clean Air Act, and Atomic Energy Act. The documentation prepared for the SP-100 Nuclear Assembly Test (NAT) included an Environmental Assessment, state permit applications, and Safety Analysis Reports. This paper discusses the regulation documentation requirements and the SP-100 NAT Test Site experience. 12 refs., 2 figs., 2 tabs.

  16. 2013 R&D 100 Award Winners | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 R&D 100 Award Winners 2013 R&D 100 Award Winners U.S. Department of Energy researchers have won 36 of the 100 awards given out this year by R&D Magazine for the most outstanding technology developments of 2012. The awards are presented annually in recognition of exceptional new products, processes, materials, or software that were developed throughout the world and introduced into the market the previous year. Researchers at ten of DOE's national laboratories and the Y-12 National

  17. NNSA Sites, Labs Earn 12 R&D 100 Awards | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration Library / Press Releases NNSA Sites, Labs Earn 12 R&D 100 Awards June 20, 2012 WASHINGTON, D.C. - The National Nuclear Security Administration (NNSA) today congratulated its laboratories and production sites for receiving 12 of R&D Magazine's 2012 R&D 100 Awards. "Congratulations to this year's R&D 100 award winners," said Energy Secretary Steven Chu. "The research and development at the Department of Energy's laboratories continues to help the

  18. Alpha Emission Near 100Sn and the Termination of the rp Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Alpha Emission Near 100 Sn and the Termination of the rp Process The astrophysical rp-process is thought to reach a termination point in the region of 100 Sn, via the Sn(p,γ)⟶Sb(p,γ)⟶Te(γ,α) cycle, due to changing mass surface above the closed Z=50 shell. By measuring the decay properties of nuclei in this region, information can be provided to determine the actual endpoint for the rp-process, as well as measure single particle states near 100 Sn. We have identified a small alpha branch

  19. Cleanup Verification Package for the 100-K-55:1 and 100-K-56:1 Pipelines and the 116-KW-4 and 116-KE-5 Heat Recovery Stations

    SciTech Connect (OSTI)

    J. M. Capron

    2005-09-28

    This cleanup verification package documents completion of remedial action for the 100-K-55:1 and 100-K-56:1 reactor cooling effluent underground pipelines and for the 116-KW-4 and 116-KE-5 heat recovery stations. The 100-K-55 and 100-K-56 sites consisted of those process effluent pipelines that serviced the 105-KW and 105-KE Reactors.

  20. Y-12 neutron detector wins prestigious R&D 100 Award | Y-12 National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    neutron detector wins ... Y-12 neutron detector wins prestigious R&D 100 Award Posted: July 9, 2013 - 4:11pm Ashley Stowe, Y 12 senior development chemist, working with Fisk...

  1. R&D 100 Awards Demonstrate Clean Energy Legacy - Continuum Magazine...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... In 2004, NREL's work to improve the enzymatic process with enzyme companies Novozymes Biotech, Inc. and Genencor International (now part of DuPont) won another R&D 100 Award. ...

  2. 16 TAC, part 1, chapter 3, rule 3.100 Seismic Holes and Core...

    Open Energy Info (EERE)

    LibraryAdd to library Legal Document- RegulationRegulation: 16 TAC, part 1, chapter 3, rule 3.100 Seismic Holes and Core HolesLegal Abstract These rules outline definitions...

  3. Summary of TPH Monitoring Conducted at 100-NR-2 during CY 2008 and 2009

    SciTech Connect (OSTI)

    Fritz, Brad G.; Mendoza, Donaldo P.; young, david; Stegen, J. A.; Bunn, Amoret L.

    2009-08-12

    This report covers a variety of environmental monitoring activities that were conducted over an 18 month period to provide characterization of a TPH-diesel contamination plume in the 100-NR-2 OU

  4. Phonon anharmonicity in silicon from 100 to 1500 K (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: Phonon anharmonicity in silicon from 100 to 1500 K Authors: Kim, D. S. 1 ; Smith, Hillary 1 ; Niedziela, Jennifer L 2 ; Li, Chen ...

  5. 807,"Arkansas Electric Corp",11,"Fitzhugh","OG&E North",100,0...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...614323.27,2117608.11,"applicationvnd.ms-excel" 5580,"East Kentucky Power Coop Inc",1,"Smith","Lake Reba",100,11.59,"OH","AC",138,138,954,"ACSR","Single",1,1,"TH-Wood ...

  6. U.S. Department of Energy Projects Win 33 R&D 100 Awards for 2015

    Broader source: Energy.gov [DOE]

    U.S. Department of Energy (DOE) researchers have won 33 of the 100 awards given out this year by R&D Magazine for the most outstanding technology developments with promising commercial...

  7. JLab's YouTube Channel Attracts 100,000 Subscribers | Jefferson...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    JLab's YouTube Channel Attracts 100,000 Subscribers In roughly six years, Jefferson Lab's ... Over the years, most of Jefferson Lab's YouTube subscribers have tuned in for the ...

  8. Sub-100 ps laser-driven dynamic compression of solid deuterium...

    Office of Scientific and Technical Information (OSTI)

    a 40 J laser pulse Citation Details In-Document Search Title: Sub-100 ps laser-driven dynamic compression of solid deuterium with a 40 J laser pulse You are ...

  9. S M Stoller Star Center-B100 Monthly/Effluent; Largo, FL

    Office of Legacy Management (LM)

    Technical Report for S M Stoller Star Center-B100 MonthlyEffluent; Largo, FL 7031-226 Accutest Job Number: F37650 Sampling Date: 010506 Report to: S M Stoller ...

  10. S M Stoller Star Center-B100 Monthly/Effluent; Largo, FL

    Office of Legacy Management (LM)

    Test results contained within this data package meet the requirements of the National ... Sample Summary S M Stoller Job No: F30882 Star Center-B100 MonthlyEffluent; Largo, FL ...

  11. CNS, UT chemical sensing technology wins R&D 100 Award | Y-12...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CNS, UT chemical sensing ... CNS, UT chemical sensing technology wins R&D 100 Award Posted: November 19, 2015 - 4:57pm The ChIMES team's investigators each brought unique expertise ...

  12. Solar Research Earns Three Prestigious R&D 100 Awards - News...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solar Research Earns Three Prestigious R&D 100 Awards June 22, 2011 A technique to turn silicon into ink, a faster way to assess solar cells, and a better furnace for heating solar ...

  13. Four Los Alamos projects selected as R&D 100 Award finalists

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    projects selected as R&D 100 Award finalists Finalists include X-ray imaging, pipe corrosion, data handling and damage-detection software July 27, 2015 Los Alamos NationalA team...

  14. 100,000-Mile Evaluation of Transit Buses Operated on Biodiesel...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Evaluation of Transit Buses Operated on Biodiesel Blends (B20) 100,000-Mile Evaluation of Transit Buses Operated on Biodiesel Blends (B20) Presentation given at DEER 2006, ...

  15. National Lab Projects Win R&D 100 Awards | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    point, where a device absorbs the solar heat to make syngas, solar-boosted natural gas. This new system was recognized with a 2014 R&D 100 Award. | Photo courtesy of Pacific...

  16. OpL^^f-B^ JPL D-1085 D O Technical Information Report SP-100...

    Office of Scientific and Technical Information (OSTI)

    OpLf-B JPL D-1085 D O Technical Information Report SP-100, The U.S. Space Nuclear ... Virginia Department of Energy Office of Nuclear Energy Washington, D.C. National ...

  17. EERE National Laboratories Inventions Take Home Nine R&D 100 Awards

    Broader source: Energy.gov [DOE]

    The53rd R&D 100 Awardsceremony took place at the end of 2015 in Las Vegas, Nevada. Going all the way back to 1963, these prestigious awards have identified and honored significant major...

  18. 100 Area D4 Project Building Completion Report: December 2008 to December 2009

    SciTech Connect (OSTI)

    K.G. Finucane, J.P. Harrie

    2010-10-26

    This report documents the final status of buildings after the completion of D4 activities at the 100 Area of the U.S. Department of Energy Hanford Site from December 1, 2008, to December 31, 2009.

  19. First-cut design of an all-superconducting 100-T direct current magnet

    SciTech Connect (OSTI)

    Iwasa, Yukikazu Hahn, Seungyong

    2013-12-16

    A 100-T magnetic field has heretofore been available only in pulse mode. This first-cut design demonstrates that a 100-T DC magnet (100?T) is possible. We base our design on: Gadolinium-based coated superconductor; a nested-coil formation, each a stack of double-pancake coils with the no-insulation technique; a band of high-strength steel over each coil; and a 12-T radial-field limit. The 100?T, a 20?mm cold bore, 6-m diameter, 17-m height, with a total of 12?500-km long superconductor, stores an energy of 122 GJ at its 4.2-K operating current of 2400?A. It requires a 4.2-K cooling power of 300?W.

  20. National Lab Projects Win R&D 100 Awards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This new system was recognized with a 2014 R&D 100 Award. | Photo courtesy of Pacific Northwest National Lab. Ben Dotson Ben Dotson Former Project Coordinator for Digital Reform, ...

  1. Sandia National Laboratories: Sandia wins 5 R&D 100 awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    wins a 'green technology' gold award Sandia R&D 100 winner Stan Atcitty, right, discusses power conversion with John Hostetler of United Silicon Carbide Inc. Competing in an...

  2. Energy Department to Award $100 Million for Energy Frontier Research Centers

    Broader source: Energy.gov [DOE]

    U.S. Energy Secretary Ernest Moniz today announced a proposed $100 million in FY2014 funding for Energy Frontier Research Centers to accelerate the scientific breakthroughs needed to build a new 21st-century energy economy.

  3. Recovery Act Investment Moves EM Past Milestone of 100 Project Completions

    Broader source: Energy.gov [DOE]

    The Office of Environmental Management's (EM) American Recovery and Reinvestment Act Program recently paused to observe a notable achievement: completion of more than 100 projects in its $6 billion...

  4. EERE Success Story—EERE National Laboratories’ Inventions Take Home Nine R&D 100 Awards

    Broader source: Energy.gov [DOE]

    The 53rd R&D 100 Awards ceremony took place at the end of 2015 in Las Vegas, Nevada. Going all the way back to 1963, these prestigious awards have identified and honored significant major...

  5. NREL Research Honored With R&D 100 Awards - News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    R&D 100 award categories. The awards were presented November 13, in Las Vegas. A senior scientist with NREL's Biosciences Center and the principal investigator for the research,...

  6. NREL Research Honored With R&D 100 Awards | Awards and Honors...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    R&D 100 award categories. The awards were presented November 13, in Las Vegas. A senior scientist with NREL's Biosciences Center and the principal investigator for the research,...

  7. Surface reactions of ethanol over UO2(100) thin film

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    S. D. Senanayake; Mudiyanselage, K.; Burrell, A. K.; Sadowski, J. T.; Idriss, H.

    2015-10-08

    The study of the reactions of oxygenates on well-defined oxide surfaces is important for the fundamental understanding of heterogeneous chemical pathways that are influenced by atomic geometry, electronic structure, and chemical composition. In this work, an ordered uranium oxide thin film surface terminated in the (100) orientation is prepared on a LaAlO3 substrate and studied for its reactivity with a C-2 oxygenate, ethanol (CH3CH2OH). With the use of synchrotron X-ray photoelectron spectroscopy (XPS), we have probed the adsorption and desorption processes observed in the valence band, C 1s, O 1s, and U 4f to investigate the bonding mode, surface composition,more » electronic structure, and probable chemical changes to the stoichiometric-UO2(100) [smooth-UO2(100)] and Ar+-sputtered UO2(100) [rough-UO2(100)] surfaces. Unlike UO2(111) single crystal and UO2 thin film, Ar-ion-sputtering of this UO2(100) did not result in noticeable reduction of U cations. Upon ethanol adsorption (saturation occurred at 0.5 ML), only the ethoxy (CH3CH2O–) species is formed on smooth-UO2(100) whereas initially formed ethoxy species are partially oxidized to surface acetate (CH3COO–) on the Ar+-sputtered UO2(100) surface. Furthermore, all ethoxy and acetate species are removed from the surface between 600 and 700 K.« less

  8. Excerpt from September 2013 PIC Committee Meeting Summary 100 F Proposed Plan

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    September 2013 PIC Committee Meeting Summary 100 F Proposed Plan The committee developed a list of goals for public involvement for the 100 F Proposed Plan, the second proposed plan to be released after the 300 Area and the first major site with a reactor. The committee subsequently discussed innovative tools to achieve the goals and broaden and engage the audience. * Public education about cleanup options, alternatives, and potential short and long-term effects, communicating the "why

  9. From Tragedy to Triumph: Rebuilding Greensburg, Kansas To Be a 100%

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Renewable Energy City: Preprint | Department of Energy Triumph: Rebuilding Greensburg, Kansas To Be a 100% Renewable Energy City: Preprint From Tragedy to Triumph: Rebuilding Greensburg, Kansas To Be a 100% Renewable Energy City: Preprint Presented at ACEEE Summer Study; Pacific Grove, California; August 15-20, 2010 PDF icon 48300.pdf More Documents & Publications NREL Helps Greensburg Set the Model for Green Communities (Fact Sheet), Innovation: The Spectrum of Clean Energy Innovation,

  10. Excellence in Bioenergy Innovation- A Presentation of 2015 R&D 100 Award Winning Projects

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Excellence in Bioenergy Innovation-A Presentation of 2015 R&D 100 Award Winning Projects January 21, 2016 Bioenergy Technologies Office (BETO) 2 | Bioenergy Technologies Office Agenda * Introduction and BETO Overview - Erica Qiao, BCS, Incorporated * Excellence in Bioenergy Innovation-A Presentation of 2015 R&D 100 Award Winning Projects - Dr. Jianping Yu, National Renewable Energy Laboratory - Douglas Elliott, Pacific Northwest National Laboratory 3 | Bioenergy Technologies Office

  11. New 100Gbps Network Will Keep America on Cutting Edge of Innovation |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 100Gbps Network Will Keep America on Cutting Edge of Innovation New 100Gbps Network Will Keep America on Cutting Edge of Innovation November 15, 2011 - 11:22am Addthis Initially the network will connect the three Energy Department unclassified supercomputing centers: the National Energy Research Scientific Computing Center (NERSC) at Berkeley Lab, Oak Ridge Leadership Computing Facility (OLCF), and Argonne Leadership Computing Facility (ALCF), as well as the Manhattan

  12. Los Alamos County is among 100 Best Communities for Young People

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    100 Best Communities for Young People Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue:May 2016 all issues All Issues » submit Los Alamos County is among 100 Best Communities for Young People The recognition is given to locations that make youth a priority through caring adults, safe places, a healthy start, effective education, and opportunities to help others. October 1, 2012 dummy image Read our archives Contacts Editor Linda

  13. Obama Administration Announces Additional $42,380,100 for Local Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Efficiency Improvements in Indiana | Department of Energy 42,380,100 for Local Energy Efficiency Improvements in Indiana Obama Administration Announces Additional $42,380,100 for Local Energy Efficiency Improvements in Indiana March 26, 2009 - 12:00am Addthis WASHINGTON - Vice President Joe Biden and Energy Secretary Steven Chu today announced plans to invest $3.2 billion in energy efficiency and conservation projects in U.S. cities, counties, states, territories, and Native American tribes.

  14. Obama Administration Announces Additional $52,295,100 for Local Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Efficiency Improvements in Maryland | Department of Energy 2,295,100 for Local Energy Efficiency Improvements in Maryland Obama Administration Announces Additional $52,295,100 for Local Energy Efficiency Improvements in Maryland March 26, 2009 - 12:00am Addthis WASHINGTON - Vice President Joe Biden and Energy Secretary Steven Chu today announced plans to invest $3.2 billion in energy efficiency and conservation projects in U.S. cities, counties, states, territories, and Native American

  15. Surface reactions of ethanol over UO2(100) thin film

    SciTech Connect (OSTI)

    S. D. Senanayake; Mudiyanselage, K.; Burrell, A. K.; Sadowski, J. T.; Idriss, H.

    2015-10-08

    The study of the reactions of oxygenates on well-defined oxide surfaces is important for the fundamental understanding of heterogeneous chemical pathways that are influenced by atomic geometry, electronic structure, and chemical composition. In this work, an ordered uranium oxide thin film surface terminated in the (100) orientation is prepared on a LaAlO3 substrate and studied for its reactivity with a C-2 oxygenate, ethanol (CH3CH2OH). With the use of synchrotron X-ray photoelectron spectroscopy (XPS), we have probed the adsorption and desorption processes observed in the valence band, C 1s, O 1s, and U 4f to investigate the bonding mode, surface composition, electronic structure, and probable chemical changes to the stoichiometric-UO2(100) [smooth-UO2(100)] and Ar+-sputtered UO2(100) [rough-UO2(100)] surfaces. Unlike UO2(111) single crystal and UO2 thin film, Ar-ion-sputtering of this UO2(100) did not result in noticeable reduction of U cations. Upon ethanol adsorption (saturation occurred at 0.5 ML), only the ethoxy (CH3CH2O) species is formed on smooth-UO2(100) whereas initially formed ethoxy species are partially oxidized to surface acetate (CH3COO–) on the Ar+-sputtered UO2(100) surface. Furthermore, all ethoxy and acetate species are removed from the surface between 600 and 700 K.

  16. End-System Network Interface Controller for 100 Gb/s Wide Area Networks: Final Report

    SciTech Connect (OSTI)

    Wen, Jesse

    2013-08-30

    In recent years, network bandwidth requirements have scaled multiple folds, pushing the need for the development of data exchange mechanisms at 100 Gb/s and beyond. High performance computing, climate modeling, large-scale storage, and collaborative scientific research are examples of applications that can greatly benefit by leveraging high bandwidth capabilities of the order of 100 Gb/s. Such requirements and advances in IEEE Ethernet standards, Optical Transport Unit4 (OTU4), and host-system interconnects demand a network infrastructure supporting throughput rates of the order of 100 Gb/s with a single wavelength. To address such a demand Acadia Optronics in collaboration with the University of New Mexico, proposed and developed a end-system Network Interface Controller (NIC) for the 100Gbps WANs. Acadia’s 100G NIC employs an FPGA based system with a high-performance processor interconnect (PCIe 3.0) and a high capacity optical transmission link (CXP) to provide data transmission at the rate of 100 Gbps.

  17. Investigation of Hexavalent Chromium Flux to Groundwater at the 100-C-7:1 Excavation Site

    SciTech Connect (OSTI)

    Truex, Michael J.; Vermeul, Vincent R.; Fritz, Brad G.; Mackley, Rob D.; Horner, Jacob A.; Johnson, Christian D.; Newcomer, Darrell R.

    2012-11-16

    Deep excavation of soil has been conducted at the 100-C-7 and 100-C-7:1 waste sites within the 100-BC Operable Unit at the Department of Energy (DOE) Hanford Site to remove hexavalent chromium (Cr(VI)) contamination with the excavations reaching to near the water table. Soil sampling showed that Cr(VI) contamination was still present at the bottom of the 100-C-7:1 excavation. In addition, Cr(VI) concentrations in a downgradient monitoring well have shown a transient spike of increased Cr(VI) concentration following initiation of excavation. Potentially, the increased Cr(VI) concentrations in the downgradient monitoring well are due to Cr(VI) from the excavation site. However, data were needed to evaluate this possibility and to quantify the overall impact of the 100-C-7:1 excavation site on groundwater. Data collected from a network of aquifer tubes installed across the floor of the 100-C-7:1 excavation and from temporary wells installed at the bottom of the entrance ramp to the excavation were used to evaluate Cr(VI) releases into the aquifer and to estimate local-scale hydraulic properties and groundwater flow velocity.

  18. Composite lead for conducting an electrical current between 75-80K and 4.5K temperatures

    DOE Patents [OSTI]

    Negm, Yehia; Zimmerman, George O.; Powers, Jr., Robert E.; McConeghy, Randy J.; Kaplan, Alvaro

    1994-12-27

    A composite lead is provided which electrically links and conducts a current between about 75-80K. and liquid helium temperature of about 4.5K. The composite lead may be employed singly or in multiples concurrently to provide conduction of electrical current from normal conductors and semi-conductors at room temperature to superconductors operating at 4.5K. In addition, a variety of organizationl arrangements and assemblies are provided by which the mechanical strength and electrical reliability of the composite lead is maintained.

  19. Coal Technology '80. Volume 5. Synthetic fuels from coal. Volume 6. Industrial/utility applications for coal

    SciTech Connect (OSTI)

    Not Available

    1980-01-01

    The 3rd international coal utilization exhibition and conference Coal Technology '80 was held at the Astrohall, Houston, Texas, November 18-20, 1980. Volume 5 deals with coal gasification and coal liquefaction. Volume 6 deals with fluidized-bed combustion of coal, cogeneration and combined-cycle power plants, coal-fuel oil mixtures (COM), chemical feedstocks via coal gasification and Fischer-Tropsch synthesis. Thirty-six papers have been entered individually into EDB and seven also into ERA; three had been entered previously from other sources. (LTN)

  20. Composite lead for conducting an electrical current between 75--80K and 4. 5K temperatures

    DOE Patents [OSTI]

    Negm, Y.; Zimmerman, G.O.; Powers, R.E. Jr.; McConeghy, R.J.; Kaplan, A.

    1994-12-27

    A composite lead is provided which electrically links and conducts a current between about 75-80K and liquid helium temperature of about 4.5K. The composite lead may be employed singly or in multiples concurrently to provide conduction of electrical current from normal conductors and semi-conductors at room temperature to superconductors operating at 4.5K. In addition, a variety of organizational arrangements and assemblies are provided by which the mechanical strength and electrical reliability of the composite lead is maintained. 12 figures.

  1. Elastic Scattering Of {sup 6,7}Li+{sup 80}Se At Near And Above Barrier Energies

    SciTech Connect (OSTI)

    Fimiani, L.; Marti, G. V.; Capurro, O. A.; Barbara, E. de; Testoni, J. E.; Zalazar, L.; Arazi, A.; Cardona, M. A.; Carnelli, P.; Figueira, J. M.; Hojman, D.; Martinez Heimann, D.; Negri, A. E.; Pacheco, A. J.; Fernandez Niello, J. O.

    2010-08-04

    In this work we propose to study the elastic scattering of the weakly bound projectiles {sup 6,7}Li on an intermediate mass target {sup 80}Se. From the experimental results presented here, precise angular distributions at energies below, around and above the nominal Coulomb barriers of the systems were obtained. The final goal of our work is to determine the characteristic parameters of the optical potential and use them to address the question of whether the usual threshold anomaly or the breakup threshold anomaly are present or not in these systems.

  2. Superconducting thin films of (100) and (111) oriented indium doped topological crystalline insulator SnTe

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Si, W.; Zhang, C.; Wu, L.; Ozaki, T.; Gu, G.; Li, Q.

    2015-09-01

    Recent discovery of the topological crystalline insulator SnTe has triggered a search for topological superconductors, which have potential application to topological quantum computing. The present work reports on the superconducting properties of indium doped SnTe thin films. The (100) and (111) oriented thin films were epitaxially grown by pulsed-laser deposition on (100) and (111) BaF2 crystalline substrates respectively. The onset superconducting transition temperatures are about 3.8 K for (100) and 3.6 K for (111) orientations, slightly lower than that of the bulk. Magneto-resistive measurements indicate that these thin films may have upper critical fields higher than that of the bulk.more » With large surface-to-bulk ratio, superconducting indium doped SnTe thin films provide a rich platform for the study of topological superconductivity and potential device applications based on topological superconductors.« less

  3. 100th WIPP Quarterly Meeting continues tradition of consultation and cooperation with state

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    75) 234-7327 www.wipp.energy.gov U.S. Department of Energy Carlsbad Field Office Waste Isolation Pilot Plant P.O. Box 3090 Carlsbad, New Mexico 88221 DOENews For immediate release 100 th WIPP Quarterly Meeting continues tradition of consultation and cooperation with state CARLSBAD, N.M., October 10, 2007 - The Waste Isolation Pilot Plant (WIPP) reached a major milestone in its consultation and cooperation with the state of New Mexico and stakeholders. Today, WIPP marked the 100 th gathering of

  4. OSTI's Science Search Web Tools in Top 100 | OSTI, US Dept of Energy,

    Office of Scientific and Technical Information (OSTI)

    Office of Scientific and Technical Information OSTI's Science Search Web Tools in Top 100 August 3, 2005 Oak Ridge, TN - Online search tools at the U.S. Department of Energy (DOE) Office of Scientific and Technical Information (OSTI) hold six slots in the recently posted Top 100 Science/Technology Government Information Web sites by the Association of College and Research Libraries (ACRL). Science.gov, the cross-agency science portal hosted by OSTI, tops the list in ACRL's Science Search

  5. IMPROVED DARK ENERGY CONSTRAINTS FROM {approx}100 NEW CfA SUPERNOVA TYPE Ia

    Office of Scientific and Technical Information (OSTI)

    LIGHT CURVES (Journal Article) | SciTech Connect IMPROVED DARK ENERGY CONSTRAINTS FROM {approx}100 NEW CfA SUPERNOVA TYPE Ia LIGHT CURVES Citation Details In-Document Search Title: IMPROVED DARK ENERGY CONSTRAINTS FROM {approx}100 NEW CfA SUPERNOVA TYPE Ia LIGHT CURVES We combine the CfA3 supernovae Type Ia (SN Ia) sample with samples from the literature to calculate improved constraints on the dark energy equation of state parameter, w. The CfA3 sample is added to the Union set of Kowalski

  6. Improved Dark Energy Constraints From ~ 100 New CfA Supernova Type Ia Light

    Office of Scientific and Technical Information (OSTI)

    Curves (Journal Article) | SciTech Connect Improved Dark Energy Constraints From ~ 100 New CfA Supernova Type Ia Light Curves Citation Details In-Document Search Title: Improved Dark Energy Constraints From ~ 100 New CfA Supernova Type Ia Light Curves We combine the CfA3 supernovae Type Ia (SN Ia) sample with samples from the literature to calculate improved constraints on the dark energy equation of state parameter, w. The CfA3 sample is added to the Union set of Kowalski et al. to form the

  7. Large-Scale Deep Learning on the YFCC100M Dataset (Conference) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Conference: Large-Scale Deep Learning on the YFCC100M Dataset Citation Details In-Document Search Title: Large-Scale Deep Learning on the YFCC100M Dataset Authors: Ni, K ; Boakye, K ; Van Essen, B ; Pearce, R ; Borth, D ; Chen, B ; Wang, E Publication Date: 2014-10-01 OSTI Identifier: 1177251 Report Number(s): LLNL-CONF-661841 DOE Contract Number: DE-AC52-07NA27344 Resource Type: Conference Resource Relation: Conference: Presented at: Neural Information Processing Systems 2014,

  8. Two New R&D 100 Awards Uphold NREL Winning Streak - Continuum Magazine |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL Two New R&D 100 Awards Uphold NREL Winning Streak Photo provided by Solar Junction Two New R&D 100 Awards Uphold NREL Winning Streak Solar cell and cooling technology solve industry problems. Photo of a man in a white hood, mask, and contamination suit looks through his glasses at a blue white light emanating from the deposition equipment. An inset photo shows a hand grasping forceps that are holding a round, gold-colored solar wafer. Solar Junction's SJ3 solar cell is based on

  9. Sub-100 ps laser-driven dynamic compression of solid deuterium with a ~ 40

    Office of Scientific and Technical Information (OSTI)

    μ J laser pulse (Journal Article) | SciTech Connect Journal Article: Sub-100 ps laser-driven dynamic compression of solid deuterium with a ~ 40 μ J laser pulse Citation Details In-Document Search Title: Sub-100 ps laser-driven dynamic compression of solid deuterium with a ~ 40 μ J laser pulse Authors: Armstrong, M ; Crowhurst, J ; Bastea, S ; Zaug, J ; Goncharov, A Publication Date: 2014-07-14 OSTI Identifier: 1158883 Report Number(s): LLNL-JRNL-513474 Journal ID: ISSN 0003-6951; APPLAB

  10. Pacific Northwest National Laboratory Apatite Investigation at the 100-NR-2 Quality Assurance Project Plan

    SciTech Connect (OSTI)

    Fix, N. J.

    2008-03-28

    This Quality Assurance Project Plan provides the quality assurance requirements and processes that will be followed by staff working on the 100-NR-2 Apatite Project. The U.S. Department of Energy, Fluor Hanford, Inc., Pacific Northwest National Laboratory, and the Washington Department of Ecology agreed that the long-term strategy for groundwater remediation at 100-N would include apatite sequestration as the primary treatment, followed by a secondary treatment. The scope of this project covers the technical support needed before, during, and after treatment of the targeted subsurface environment using a new high-concentration formulation.

  11. DOE Funded Research Projects Win 31 R D 100 Awards for 2007 October 18 2007

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | U.S. DOE Office of Science (SC) Funded Research Projects Win 31 R D 100 Awards for 2007 October 18 2007 News News Home Featured Articles Science Headlines 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 Science Highlights Presentations & Testimony News Archives Communications and Public Affairs Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 10.18.07 DOE Funded Research Projects Win 31 R D 100

  12. EERE Success Story-Ionic Liquids Used as Wear Reduction, Wins R&D 100

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Award | Department of Energy Liquids Used as Wear Reduction, Wins R&D 100 Award EERE Success Story-Ionic Liquids Used as Wear Reduction, Wins R&D 100 Award October 16, 2014 - 11:19am Addthis Partnered with Shell Global Solutions, the Oak Ridge National Laboratory (ORNL) has developed ionic liquids (salts in a liquid state at ambient temperatures) that can be used as friction and wear reduction additives for lubricating oils. The ionic liquids create nanostructured protective films on

  13. EERE Success Story-Kingston Creek Hydro Project Powers 100 Households |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Kingston Creek Hydro Project Powers 100 Households EERE Success Story-Kingston Creek Hydro Project Powers 100 Households August 21, 2013 - 12:00am Addthis Nevada-based contracting firm Nevada Controls, LLC used a low-interest loan from the Nevada State Office of Energy's Revolving Loan Fund to help construct a hydropower project in the small Nevada town of Kingston. The Kingston Creek Project-benefitting the Young Brothers Ranch-is a 175-kilowatt hydro generation plant

  14. EERE Success Story-Redox Shuttle Additive, Wins 2014 R&D 100 Award |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Redox Shuttle Additive, Wins 2014 R&D 100 Award EERE Success Story-Redox Shuttle Additive, Wins 2014 R&D 100 Award October 16, 2014 - 5:03pm Addthis Partnered with Superior Graphite Inc., Hanyang University, Korea (YK Sun), Yang Ren (APS), the Sandia National Laboratory and the Argonne National Laboratory have developed a chemical solution, known as a redox shuttle additive, a chemical that prevents overcharging by electrochemically "locking in" a

  15. Nearly 100 NREL Staff to Discuss Innovation at WREF 2012 - News Releases |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL Nearly 100 NREL Staff to Discuss Innovation at WREF 2012 April 9, 2012 Nearly 100 renewable energy experts from the U.S. Department of Energy's (DOE)'s National Renewable Energy Laboratory (NREL) have been selected to present at this year's World Renewable Energy Forum (WREF) to be held in Denver, Colo., on May 13-17, at the Colorado Convention Center. NREL's Director, Dan Arvizu, opens the conference as a keynote speaker at the May 14 plenary session. Other NREL presenters represent

  16. NREL Research Earns Three Prestigious R&D 100 Awards - News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Earns Three Prestigious R&D 100 Awards July 8, 2013 A new energy-efficient approach to building occupancy detection, a better way to detect heat loss in electric-vehicle batteries and a high-efficiency silicon solar cell - all developed or advanced at the Energy Department's National Renewable Energy Laboratory (NREL) - have been named among this year's most significant innovations by R&D Magazine. "These R&D 100 awards honoring our work in solar, vehicles and energy

  17. NREL Research Earns Two Prestigious R&D 100 Awards - News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Earns Two Prestigious R&D 100 Awards June 20, 2012 A revolutionary new approach to air conditioning, and a three-junction solar cell that holds the world efficiency record - both developed at the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) - have been named among this year's most significant innovations by R&D Magazine. "These two R&D 100 awards honoring our work in solar cells and energy efficiency demonstrate how NREL research

  18. NREL Research Teams Win Three R&D 100 Awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Teams Win Three R&D 100 Awards Golden, Colo., Oct. 4, 2001 - Since 1982, the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) has won 28 R&D 100 awards in the annual competition for innovative technology sponsored by R&D Magazine. This year, three NREL research teams have brought that total number of awards to 31. The 2001 awards are for a solar cell that has shattered world efficiency records, an antenna that reconfigures itself to direct its power at

  19. NREL Solar Research Gains Two R&D 100 Awards - News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solar Research Gains Two R&D 100 Awards July 17, 2008 An ultra-light, highly efficient solar cell and use of ink-jet printing to manufacture thin-film photovoltaics-both developed at the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory-have been named among this year's most significant innovations by Research & Development (R&D) Magazine. Known as "the Oscars of Invention," the R&D 100 Award showcases the most significant new technologies

  20. NREL Solar Technologies Recognized with Special R&D 100 Honors - News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Releases | NREL NREL Solar Technologies Recognized with Special R&D 100 Honors October 24, 2008 Researchers at the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) took home high honors from Editors of R&D Magazine recently for two separate solar cell technologies that were named "the most revolutionary technologies of the year." At its annual awards gala for the winners of the R&D 100 awards in Chicago Oct. 16, R&D Magazine announced that an

  1. NREL Takes Two R&D 100 Awards - News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL Takes Two R&D 100 Awards July 8, 2005 Golden, Colo. - Two technologies developed by the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) are among this year's most significant innovations, as judged by Research & Development (R&D) Magazine. The Laboratory's R&D 100 Awards for 2005 are for a silicon testing system that helps manufacturers determine the quality of silicon material in the early stage of solar cell production, and for energy modeling

  2. NREL: Energy Storage - NREL Battery Calorimeters Win R&D 100 Award

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL Battery Calorimeters Win R&D 100 Award The NREL Energy Storage team Dirk Long, John Ireland, Matthew Keyser, Ahmad Pesaran, and Mark Mihalic of NREL's Energy Storage Team. Photo by Amy Glickson, NREL 27242 August 28, 2013 Isothermal Battery Calorimeters (IBCs) developed by the National Renewable Energy Laboratory (NREL) and NETZSCH North America are among the winners of the 2013 R&D 100 Awards, known in the research and development community as "the Oscars of Innovation."

  3. Four Los Alamos projects selected as R&D 100 Award finalists

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Four Los Alamos projects selected as R&D 100 Award finalists Four Los Alamos projects selected as R&D 100 Award finalists Finalists include X-ray imaging, pipe corrosion, data handling and damage-detection software July 27, 2015 Los Alamos NationalA team uses the PipeLIBS tool, which can quickly assess the condition of a pipe. Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines

  4. Microsoft PowerPoint - 100 D-H Proposed Plan for HAB 120815 v3.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    D/H Proposed Plan Update for HAB Nina Menard Dec. 8, 2015 * Size of cleanup area: 7.8 square miles * Total waste sites: ~280 * Pump & treats: 2 * GW contaminants: o Chromium o Nitrate o Strontium-90 Hexavalent chromium Strontium-90 Nitrate Columbia River 100 D/H Progress Report * By removing hexavalent chromium-contaminated soil at 100-D (big dig) and concentrating pump and treat, the need for pump & treat was reduced an estimated 34 years! * Remediation of interim action waste sites to

  5. Monolayer-induced band shifts at Si(100) and Si(111) surfaces

    SciTech Connect (OSTI)

    Mkinen, A. J. Kim, Chul-Soo; Kushto, G. P.

    2014-01-27

    We report our study of the interfacial electronic structure of Si(100) and Si(111) surfaces that have been chemically modified with various organic monolayers, including octadecene and two para-substituted benzene derivatives. X-ray photoelectron spectroscopy reveals an upward band shift, associated with the assembly of these organic monolayers on the Si substrates, that does not correlate with either the dipole moment or the electron withdrawing/donating character of the molecular moieties. This suggests that the nature and quality of the self-assembled monolayer and the intrinsic electronic structure of the semiconductor material define the interfacial electronic structure of the functionalized Si(100) and Si(111) surfaces.

  6. Cornell synchrotron receives up to $100M in NSF support > Archived News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stories > The Energy Materials Center at Cornell Cornell synchrotron receives up to $100M in NSF support April 21st, 2014 › By Anne Ju Arduous, year-plus-long scrutiny by the National Science Foundation (NSF) has found the Cornell High Energy Synchrotron Source (CHESS) rich in scientific discovery and exemplary in its use of government funds. CHESS has received its requested grant renewal of up to $100 million over five years, securing the national X-ray facility's near-term future.

  7. Improved Dark Energy Constraints From ~ 100 New CfA Supernova Type Ia Light

    Office of Scientific and Technical Information (OSTI)

    Curves (Journal Article) | SciTech Connect Journal Article: Improved Dark Energy Constraints From ~ 100 New CfA Supernova Type Ia Light Curves Citation Details In-Document Search Title: Improved Dark Energy Constraints From ~ 100 New CfA Supernova Type Ia Light Curves We combine the CfA3 supernovae Type Ia (SN Ia) sample with samples from the literature to calculate improved constraints on the dark energy equation of state parameter, w. The CfA3 sample is added to the Union set of Kowalski

  8. Feasibility study on AFR-100 fuel conversion from uranium-based fuel to

    Office of Scientific and Technical Information (OSTI)

    thorium-based fuel (Technical Report) | SciTech Connect Feasibility study on AFR-100 fuel conversion from uranium-based fuel to thorium-based fuel Citation Details In-Document Search Title: Feasibility study on AFR-100 fuel conversion from uranium-based fuel to thorium-based fuel Although thorium has long been considered as an alternative to uranium-based fuels, most of the reactors built to-date have been fueled with uranium-based fuel with the exception of a few reactors. The decision to

  9. Four Los Alamos projects selected as R&D 100 Award finalists

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Four Los Alamos projects selected as R&D 100 Award finalists Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:September 2015 all issues All Issues » submit Four Los Alamos projects selected as R&D 100 Award finalists Finalists include X-ray imaging, pipe corrosion, data handling and damage-detection software September 1, 2015 A team uses the PipeLIBS tool, which can quickly assess the condition of a pipe. A team uses the PipeLIBS tool, which can quickly

  10. The structure of oxygen on Cu(100) at low and high coverages (Journal

    Office of Scientific and Technical Information (OSTI)

    Article) | SciTech Connect The structure of oxygen on Cu(100) at low and high coverages Citation Details In-Document Search Title: The structure of oxygen on Cu(100) at low and high coverages No abstract prepared. Authors: Kittel, M. ; Polcik, M. ; Terborg, R. ; Hoeft, J.T. ; Baumgartel, P. ; Bradshaw, A.M. ; Toomes, R.L. ; Kang, J.H. ; Woodruff, D.P. ; Pascal, M. ; Lamont, C.L.A. ; Rotenberg, E. Publication Date: 2001-01-01 OSTI Identifier: 903114 Report Number(s): LBNL--48232 Journal ID:

  11. NNSA Physicist Named One of Ebony's Power 100 | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration Home / Blog NNSA Physicist Named One of Ebony's Power 100 Monday, December 7, 2015 - 12:00am NNSA Blog Dr. Njema Frazier walked the red carpet at the Ebony Power 100 event in Los Angeles Dec. 2. Dr. Njema Frazier is a physicist in the NNSA's Office of Defense Programs, leading scientific and technical efforts to ensure that the United States maintains a credible nuclear deterrent without nuclear explosive testing. In addition to her day job in national security, she is a

  12. 100-N Area Strontium-90 Treatability Demonstration Project: Phytoextraction Along the 100-N Columbia River Riparian Zone – Field Treatability Study

    SciTech Connect (OSTI)

    Fellows, Robert J.; Fruchter, Jonathan S.; Driver, Crystal J.; Ainsworth, Calvin C.

    2010-01-11

    Strontium-90 (90Sr) is present both in the aquifer near the river and in the vadose and riparian zones of the river’s shore at 100-NR-2. Phytoextraction of 90Sr is being considered as a potential remediation system along the riparian zone of the Columbia River. Phytoextraction would employ coyote willow (Salix exigua). Past studies have shown that willow roots share uptake mechanisms for Sr with Ca, a plant macronutrient as well as no discrimination between Sr and 90Sr. Willow 90Sr concentration ratios [CR’s; (pCi 90Sr/g dry wt. of new growth tissue)/(pCi 90Sr/g soil porewater)] were consistently greater than 65 with three-quarters of the assimilated label partitioned into the above ground shoot. Insect herbivore experiments also demonstrated no significant potential for bioaccumulation or food chain transfer from their natural activities. The objectives of this field study were three-fold: (1) to demonstrate that a viable, “managed” plot of coyote willows can be established on the shoreline of the Columbia River that would survive the same microenvironment to be encountered at the 100-NR-2 shoreline; (2) to show through engineered barriers that large and small animal herbivores can be prevented from feeding on these plants; and (3) to show that once established, the plants will provide sufficient biomass annually to support the phytoextraction technology. A field treatability demonstration plot was established on the Columbia River shoreline alongside the 100-K West water intake at the end of January 2007. The plot was delimited by a 3.05 m high chain-link fence and was approximately 10 x 25 m in size. A layer of fine mesh metal small animal screening was placed around the plot at the base of the fencing to a depth of 45 cm. A total of sixty plants were placed in six slightly staggered rows with 1-m spacing between plants. The actual plot size was 0.00461 hectare (ha). At the time of planting (March 12, 2007), the plot was located about 10 m from the river’s edge. Less than two weeks later (March 21), the river began the spring rise. Periodic (daily) or continuous flooding occurred at the site over the next 3 to 4 months. River levels at times were over the top of the enclosure’s fence. This same pattern was repeated for the next 2 years. It was however evident that even submerged for part, or all of the day, that the plants continued to flourish. There were no indications of herbivory or animal tracks observed within the plot although animals were present in the area. Biomass production over the three years followed a typical growth curve with a yield of about 1 kg for the first year when the trees were establishing themselves, 4 kg for the second, and over 20 kg for the third when the trees were entering the exponential phase of growth. On a metric Ton per hectare (mT/ha) basis this would be 0.2 mT/ha in 2007, 0.87 mT/ha in 2008, and 4.3 mT/ha in 2009. Growth curve extrapolation predicts 13.2 mT/ha during a fourth year and potentially 29.5 mT/ha following a fifth year. Using the observed Ca and Sr concentrations found in the plant tissues, and Sr CR’s calculated from groundwater analysis, projected biomass yields suggest the trees could prove effective in removing the contaminant from the 100-NR-2 riparian zone.

  13. 100-N Area Strontium-90 Treatability Demonstration Project: Food Chain Transfer Studies for Phytoremediation Along the 100-N Columbia River Riparian Zone

    SciTech Connect (OSTI)

    Fellows, Robert J.; Fruchter, Jonathan S.; Driver, Crystal J.

    2009-04-01

    Strontium-90 (90Sr) exceeds the U.S. Environmental Protection Agencys drinking water standards for groundwater (8 picocuries/L) by as much as a factor of 1000 at several locations within the Hanford 100-N Area and along the 100-N Area Columbia River shoreline). Phytoextraction, a managed remediation technology in which plants or integrated plant/rhizosphere systems are employed to phytoextract and/or sequester 90Sr, is being considered as a potential remediation system along the riparian zone of the Columbia River as part of a treatment train that includes an apatite barrier to immobilize groundwater transport of 90Sr. Phytoextraction would employ coyote willow (Salix exigua) to extract 90Sr from the vadose zone soil and aquifer sediments (phytoextraction) and filter 90Sr (rhizofiltration) from the shallow groundwater along the riparian zone of the Columbia River. The stem and foliage of coyote willows accumulating 90Sr may present not only a mechanism to remove the contaminant but also can be viewed as a source of nutrition for natural herbivores, therefore becoming a potential pathway for the isotope to enter the riparian food chain. Engineered barriers such as large and small animal fencing constructed around the field plot will control the intrusion of deer, rodents, birds, and humans. These efforts, however, will have limited effect on mobile phytophagous insects. Therefore, this study was undertaken to determine the potential for food chain transfer by insects prior to placement of the remediation technology at 100-N. Insect types include direct consumers of the sap or liquid content of the plants vascular system (xylem and phloem) by aphids as well as those that would directly consume the plant foliage such as the larvae (caterpillars) of Lepidoptera species. Heavy infestations of aphids feeding on the stems and leaves of willows growing in 90Sr-contaminated soil can accumulate a small amount (~0.15 0.06%) of the total label removed from the soil by the plant over a 17-day exposure period. The 90Sr in the exuded honeydew during this period amounted to 1.17 0.28% of this total label. The honeydew would eventually be deposited into the soil at the base of the plant, but the activity would be so dispersed as to be undetectable. Moth larvae will consume 90Sr contaminated leaves but retain very little of the label (~0.02%) and only that contained in their digestive tracts. As the moths pupated and became adults, they contained no detectable amounts of 90Sr. Over the 10-day exposure period, ~4% of the phytoextracted 90Sr was lost from the plant as moth feces. However, like the honeydew, feces dispersed into the soil were undetectable. As the plant diminishes the content of 90Sr in the soil, the activity of the label in the leaves and new stems would also diminish. The results of these studies indicate that the risk for detectable transfer of 90Sr from willow trees growing in the contaminated soil along the 100-N shoreline through the food chain of herbivorous insects would be very slight to non-existent

  14. Overview of the 1985 NASA Lewis Research Center SP-100 free-piston Stirling engine activities

    SciTech Connect (OSTI)

    Slaby, J.G.

    1985-01-01

    An overview of the 1985 (NASA) Lewis Research Center free-piston Stirling engine activities in support of the SP-100 Program is presented. The SP-100 program is being conducted in support of the Department of Advanced Research Projects Agency (DARPA) and the Department of Energy (DOE), and NASA. This effort is keyed on the design, fabrication, assembly, and testing of a 25 kW(e) Stirling space-power technology-feasibility demonstrator engine. Another facet of the SP-100 project covers the status of a 9000-h goal endurance test conducted on a 2 kW(e) free-piston Stirling/linear alternator system employing hydrostatic gas bearings. Dynamic balancing of the RE-1000 engine (a 1 kW(e) free-piston Stirling engine) using a passive dynamic absorber is discussed, along with the results of a parametric study showing the relationships of Stirling power converter specific weight and efficiency as functions of Stirling engine heater to cooler temperature ratio. Planned tests are described covering a hydrodynamic gas bearing concept for potential SP-100 application.

  15. Test documentation to convert TWRS baseline data for RDD-100 upgrades

    SciTech Connect (OSTI)

    Gneiting, B.C.

    1997-04-08

    This document describes the test documentation required for converting between different versions of the RDD-100 software application. The area of focus is the successful conversion of the master data set between different versions of the database tool and their corresponding data structures.

  16. NETL-Developed Carbon Capture Technology Recognized with an R&D 100 Award

    Broader source: Energy.gov [DOE]

    A novel carbon capture technology developed by researchers at the Department of Energy’s National Energy Technology Laboratory and ADA Environmental Solutions has been recognized by R&D Magazine as among the 100 most technologically significant products introduced into commercial marketplace within the past year.

  17. 100 Area and 300 Area Component of the RCBRA Fall 2005 Data Compilation

    SciTech Connect (OSTI)

    J.M. Queen

    2006-05-30

    The purpose of this report is to provide a brief description of the sampling approaches, a description of the samples collected, and the results for the Fall 2005 sampling event. This report presents the methods and results of the work to support the 100 Area and 300 Area Component of the River Corridor Baseline Risk Assessment.

  18. September 24, 2014 in 100E Hildebrand Hall | Center for Gas

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SeparationsRelevant to Clean Energy Technologies | Blandine Jerome 4, 2014 in 100E Hildebrand Hall Previous Next List Jihye Park (Dept. of Chemistry, Texas A&M University) Photochromic MOFs: Reversible Generation of Singlet Oxygen Kyungmin Choi (Dept. of Chemistry, UC Berkeley) Supercapacitors of Nanocrystalline Metal-Organic Frameworks

  19. Oxygen Atom Adsorption on and Diffusion into Nb(110) and Nb(100) from First Principles

    SciTech Connect (OSTI)

    Tafen, De Nyago; Gao, Michael C.

    2013-11-01

    In order to understand the dynamics of oxidation of Nb, we examine the adsorption, absorption, and diffusion of an oxygen atom on, in, and into Nb(110) and Nb(100) surfaces, respectively, using density functional theory. Our calculations predict that the oxygen atom adsorbs on the threefold site on Nb(110) and the fourfold hollow site on Nb(100), and the adsorption energy is -5.08 and -5.18 eV respectively. We find the long and short bridge sites to be transition states for O diffusion on Nb(110), while the on top site is a rank-2 saddle point. In the subsurface region, the oxygen atom prefers the octahedral site, as in bulk niobium. Our results also show that the O atom is more stable on Nb(110) subsurface than on Nb(100) subsurface. The diffusion of oxygen atoms into niobium surfaces passes through transition states where the oxygen atom is coordinated to four niobium atoms. The diffusion barriers of the oxygen atom into Nb(110) and Nb(100) are 1.81 and 2.05 eV, respectively. Analysis of the electronic density of states reveals the emergence of well localized electronic states below the lowest states of clean Nb surfaces due to d-p orbital hybridization.

  20. Measured thermal and fast neutron fluence rates, ATR Cycle 100-BC, April 23, 1993--May 13, 1993

    SciTech Connect (OSTI)

    Smith, L.D.; Murray, R.K.; Rogers, J.W.

    1993-07-01

    This report contains the thermal (2200 m/s) and fast (E>1MeV) neutron fluence rate data for ATR Cycle 100-BC which were measured by the Radiation Measurements Laboratory (RML) as requested by the Power Reactor Programs (ATR Experiments) Radiation Measurements Work Order. This report contains fluence rate values corresponding to the particular elevations (relative to the 80 ft. core elevation) where the measurements were taken. The data in this report consists of (1) a table of the ATR power history and distribution, (2) a hard copy listing of all thermal and fast neutron fluence rates, (3) plots of both the thermal and fast neutron fluence rates, and (4) a magnetic record (3.5 inch diskette) containing a listing of only the fast neutron fluence rates, their assigned elevations and proper header identification of all monitor positions contained herein. The fluence rates reported are for the average power levels given in the table of power history and distribution. All {open_quotes}H{close_quotes} holder monitor wires for this cycle are 54 inches long. All {open_quotes}SR{close_quotes} holder monitor wires for this cycle are 55 inches long. This length allows measurement of the full core region and makes the first count elevation 24.73 inches above core midplane. Due to the safety rod problems in the west lobe, {open_quotes}BR{close_quotes} holders were used in the W-1, 2, 3, and 4 positions. All {open_quotes}BR{close_quotes} holder monitor wires for this cycle are 56.25 inches long. The distance from the end of the wires to the first count position was 4.25 inches for all wires counted from this cycle. The results from the measurements in the W-1, 2, 3, 4 monitor positions indicate that the safety rod followers were rotated to a different azimuthal orientation relative to the normal orientation. The results indicate that the rotation was counterclockwise from their normal orientation. This is the same condition observed starting with Cycle 99-B.

  1. Publication list 80

    SciTech Connect (OSTI)

    1997-07-01

    Summaries and order information are presented for approximately 40 reports from DOE-funded research by the National Petroleum Technology Office. Topics include: exploration and drilling; extraction; field demonstrations of enhanced recovery; reservoir characterization; computer software and supporting documentation; and reel tape computer programs.

  2. SAND80-0984

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    v Proceedings of the Vertical Axis Wind Turbine (VAWT) Design Technology Seminar for ... Port Royal Road Springfield, VA 22161 Price: Printed Cop, '12.00, Microfiche '3.00 * ...

  3. SAND80-0984

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    August 1980 Distribution Category UC-60 PROCEEDINGS OF THE VERTICAL AXIS WIND TURBINE (VAWT) DESIGN TECHNOLOGY SEMINAR FOR INDUSTRY April 1, 2, and 3, 1980 Albuquerque, New Mexico...

  4. SAND80-0984

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... a broad spectrum of technologies in the wind energy area ... development, demonstration, and market development process. ... * streamtube , and vortex * models; Fig. 3 Numerical ...

  5. Final safety evaluation report related to the certification of the System 80{sup +} design (Docket No. 52-002). Volume 2, Chapters 15--22 and appendices

    SciTech Connect (OSTI)

    Not Available

    1994-08-01

    This final safety evaluation report (FSER) documents the technical review of the System 80+ standard design by the US Nuclear Regulatory Commission (NRC) staff. The application for the system 80+ design was submitted by Combustion Engineering, Inc., now Asea Brown Boveri-Combustion Engineering (ABB-CE) as an application for design approval and subsequent design certification pursuant to 10 CFR {section} 52.45. System 80+ is a pressurized water reactor with a rated power of 3914 megawatts thermal (MWt) and a design power of 3992 MWt at which accidents are analyzed. Many features of the System 80+ are similar to those of ABB-CE`s System 80 design from which it evolved. Unique features of the System 80+ design include: a large spherical, steel containment; an in-containment refueling water storage tank; a reactor cavity flooding system, hydrogen ignitors and a safety depressurization system for severe accident mitigation; a combustion gas turbine for an alternate ac source; and an advanced digitally based control room. On the basis of its evaluation and independent analyses, the NRC staff concludes that ABB-CE`s application for design certification meets the requirements of Subpart B of 10 CFR Part 52 that are applicable and technically relevant to the System 80+ standard design. This document, Volume 2, contains Chapters 15 through 22 and Appendices A through E.

  6. Final safety evaluation report related to the certification of the System 80{sup +} design (Docket No. 52-002). Volume 1, Chapters 1--14

    SciTech Connect (OSTI)

    Not Available

    1994-08-01

    This final safety evaluation report (FSER) documents the technical review of the System 80+ standard design by the US Nuclear Regulatory Commission (NRC) staff. The application for the System 80+ design was submitted by Combustion Engineering, Inc., now Asea Brown Boveri-Combustion Engineering (ABB-CE) as an application for design approval and subsequent design certification pursuant to 10 CFR {section} 52.45. System 80+ is a pressurized water reactor with a rated power of 3914 megawatts thermal (MWt) and a design power of 3992 MWt at which accidents are analyzed. Many features of the System 80+ are similar to those of Abb-CE`s System 80 design from which it evolved. Unique features of the System 80+ design included: a large spherical, steel containment; an in-containment refueling water storage tank; a reactor cavity flooding system, hydrogen ignitors, and a safety depressurization system for severe accident mitigation; a combustion gas turbine for an alternate ac source; and an advanced digitally based control room. On the basis of its evaluation and independent analyses, the NRC staff concludes that ABB-CE`s application for design certification meets the requirements of Subpart B of 10 CFR Part 52 that are applicable and technically relevant to the System 80+ standard design. This document, Volume 1, contains Chapters 1 through 14 of this report.

  7. PP//-80-077 ORO//-250A-309 MEASURB>ENT OF ULTRACOLD NEUTRONS PRODUCED BY USING DOPPLER-

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PP//-80-077 ORO//-250A-309 MEASURB>ENT OF ULTRACOLD NEUTRONS PRODUCED BY USING DOPPLER- SHIFTED BRAGG REFLECTION AT A PULSED-NEUTRON SOURCE T.O. Brim, J.M. C a r p e n t e r , V.E. Krohn, and G.R. Ringo Afgonne N a t i o n a l L a b o r a t o r y , Argonne, I l l i n o i s 60439 and J.W. Cronin U n i v e r s i t y of Chicago, Chicago, I l l i n o i s 60637 and T.W. Dombeck, and J.W. Lynn U n i v e r s i t y of Maryland, C o l l e g e P a r k , Maryland 20742 and S.A. Werner U n i v e r s i t

  8. Screening study for evaluation of the potential for system 80+ to consume excess plutonium - Volume 1. Final report

    SciTech Connect (OSTI)

    Not Available

    1994-04-30

    As part of the U.S. effort to evaluate technologies offering solutions for the safe disposal or utilization of surplus nuclear materials, the fiscal year 1993 Energy and Water Appropriations legislation provided the Department of Energy (DOE) the necessary funds to conduct multi-phased studies to determine the technical feasibility of using reactor technologies for the triple mission of burning weapons grade plutonium, producing tritium for the existing smaller weapons stockpile, and generating commercial electricity. DOE limited the studies to five advanced reactor designs. Among the technologies selected is the ABB-Combustion Engineering (ABB-CE) System 80+. The DOE study, currently in Phase ID, is proceeding with a more detailed evaluation of the design`s capability for plutonium disposition.

  9. Screening study for evaluation of the potential for system 80+ to consume excess plutonium - Volume 2. Final report

    SciTech Connect (OSTI)

    Not Available

    1994-04-30

    As part of the U.S. effort to evaluate technologies offering solutions for the safe disposal or utilization of surplus nuclear materials, the fiscal year 1993 Energy and Water Appropriations legislation provided the Department of Energy (DOE) the necessary funds to conduct multi-phased studies to determine the technical feasibility of using reactor technologies for the triple mission of burning weapons grade plutonium, producing tritium for the existing smaller weapons stockpile, and generating commercial electricity. DOE limited the studies to five advanced reactor designs. Among the technologies selected is the ABB-Combustion Engineering (ABB-CE) System 80+. The DOE study, currently in Phase ID, is proceeding with a more detailed evaluation of the design`s capability for plutonium disposition.

  10. Width dependent transition of quantized spin-wave modes in Ni{sub 80}Fe{sub 20} square nanorings

    SciTech Connect (OSTI)

    Banerjee, Chandrima; Saha, Susmita; Barman, Saswati; Barman, Anjan, E-mail: abarman@bose.res.in [Thematic Unit of Excellence on Nanodevice Technology, Department of Condensed Matter Physics and Material Sciences, S. N. Bose National Centre for Basic Sciences, Block JD, Sector III, Salt Lake, Kolkata 700098 (India); Rousseau, Olivier [CEMS-RIKEN, 2-1 Hirosawa, Wako, Saitama 351-0198 (Japan); Otani, YoshiChika [CEMS-RIKEN, 2-1 Hirosawa, Wako, Saitama 351-0198 (Japan); Institute for Solid State Physics, University of Tokyo, 5-1-5 Kashiwanoha, Kashiwa, Chiba 277-8581 (Japan)

    2014-10-28

    We investigated optically induced ultrafast magnetization dynamics in square shaped Ni{sub 80}Fe{sub 20} nanorings with varying ring width. Rich spin-wave spectra are observed whose frequencies showed a strong dependence on the ring width. Micromagnetic simulations showed different types of spin-wave modes, which are quantized upto very high quantization number. In the case of widest ring, the spin-wave mode spectrum shows quantized modes along the applied field direction, which is similar to the mode spectrum of an antidot array. As the ring width decreases, additional quantization in the azimuthal direction appears causing mixed modes. In the narrowest ring, the spin-waves exhibit quantization solely in azimuthal direction. The different quantization is attributed to the variation in the internal field distribution for different ring width as obtained from micromagnetic analysis and supported by magnetic force microscopy.

  11. Pathways for Ethanol Dehydrogenation and Dehydration Catalyzed by Ceria (111) and (100) Surfaces

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Beste, Ariana; Overbury, Steven

    2015-01-01

    We have performed computations to better understand how surface structure affects selectivity in dehydrogenation and dehydration reactions of alcohols. Ethanol reactions on the (111) and (100) ceria surfaces were studied starting from the dominant surface species, ethoxy. We used DFT (PBE+U) to explore reaction pathways leading to ethylene and acetaldehyde and calculated estimates of rate constants employing transition state theory. To assess pathway contributions, we carried out kinetic analysis. Our results show that intermediate and transition state structures are stabilized on the (100) surface compared to the (111) surface. Formation of acetaldehyde over ethylene is kinetically and thermodynamically preferred onmore » both surfaces. Our results are consistent with temperature programmed surface reaction and steady-state experiments, where acetaldehyde was found as the main product and evidence was presented that ethylene formation at higher temperature originates from changes in adsorbate and surface structure.« less

  12. Green cubic GaInN/GaN light-emitting diode on microstructured silicon (100)

    SciTech Connect (OSTI)

    Stark, Christoph J. M.; Detchprohm, Theeradetch; Wetzel, Christian, E-mail: wetzel@ieee.org [Department of Physics, Applied Physics, and Astronomy, Rensselaer Polytechnic Institute, Troy, New York 12180 (United States) [Department of Physics, Applied Physics, and Astronomy, Rensselaer Polytechnic Institute, Troy, New York 12180 (United States); Future Chips Constellation, Rensselaer Polytechnic Institute, 110 8th Street, Troy, New York 12180 (United States); Lee, S. C.; Brueck, S. R. J. [Department of Electrical and Computer Engineering and Center for High Technology Materials, University of New Mexico, 1313 Goddard SE, Albuquerque, New Mexico 87106 (United States)] [Department of Electrical and Computer Engineering and Center for High Technology Materials, University of New Mexico, 1313 Goddard SE, Albuquerque, New Mexico 87106 (United States); Jiang, Y.-B. [Department of Earth and Planetary Science, University of New Mexico, Albuquerque, New Mexico 87131 (United States)] [Department of Earth and Planetary Science, University of New Mexico, Albuquerque, New Mexico 87131 (United States)

    2013-12-02

    GaInN/GaN light-emitting diodes free of piezoelectric polarization were prepared on standard electronic-grade Si(100) substrates. Micro-stripes of GaN and GaInN/GaN quantum wells in the cubic crystal structure were grown on intersecting (111) planes of microscale V-grooved Si in metal-organic vapor phase epitaxy, covering over 50% of the wafer surface area. Crystal phases were identified in electron back-scattering diffraction. A cross-sectional analysis reveals a cubic structure virtually free of line defects. Electroluminescence over 20 to 100??A is found fixed at 487?nm (peak), 516?nm (dominant). Such structures therefore should allow higher efficiency, wavelength-stable light emitters throughout the visible spectrum.

  13. Design and Overview of 100 kV Bushing for the DNB Injector of ITER

    SciTech Connect (OSTI)

    Shah, Sejal; Bandyopadhyay, M.; Rotti, C.; Singh, M. J.; Roopesh, G.; Chakraborty, A. K. [ITER-India, Institute for Plasma Research, Gandhinagar-382025, Gujarat (India); Rajesh, S. [ITER-India, Institute for Plasma Research, Gandhinagar-382025, Gujarat (India); Microelectronics and Materials Physics Labs, P.O.Box 4500, FIN-90014 University of Oulu (Finland); Nishad, S.; Srusti, B. [DesignTech Systems Ltd, Banjara Hills, Hyderabad, Andhra Pradesh-500034 (India); Schunke, B.; Hemsworth, R.; Chareyre, J.; Svensson, L. [ITER Organisation, Route de Vinon, CS 90 046, 13067 St. Paul lez Durance Cedex (France)

    2011-09-26

    The 100 kV bushing is one of the most important and technologically challenging Safety Important Class (SIC) components of the Diagnostic Neutral Beam (DNB) injector of ITER. It forms interface between gas insulated electrical transmission line and torus primary vacuum and acts as a vacuum feedthrough of ITER. Design optimization has been carried out to meet the electric and structural requirements based on its classification. Unlike HNB bushing, single stage bushing is designed to provide 100 kV isolation. Finite Element Analysis (FEA) based optimization has been carried out for electrostatic and structural analysis. Manufacturing assembly sequence is studied and presented in this paper. However validation of the same is foreseen from manufacturer.

  14. GTS Duratek, Phase I Hanford low-level waste melter tests: 100-kg melter offgas report

    SciTech Connect (OSTI)

    Eaton, W.C.

    1995-11-01

    A multiphase program was initiated in 1994 to test commercially available melter technologies for the vitrification of the low-level waste (LLW) stream from defense wastes stored in underground tanks at the Hanford Site in southeastern Washington State. Phase 1 of the melter demonstration tests using simulated LLW was completed during fiscal year 1995. This document is the 100-kg melter offgas report on testing performed by GTS Duratek, Inc., in Columbia, Maryland. GTS Duratek (one of the seven vendors selected) was chosen to demonstrate Joule heated melter technology under WHC subcontract number MMI-SVV-384215. The document contains the complete offgas report on the 100-kg melter as prepared by Parsons Engineering Science, Inc. A summary of this report is also contained in the GTS Duratek, Phase I Hanford Low-Level Waste Melter Tests: Final Report (WHC-SD-WM-VI-027).

  15. Description of work for 100-N Hanford Generating Plant settling pond drilling and sampling

    SciTech Connect (OSTI)

    Galbraith, R.P.

    1993-09-01

    This description of work details the field activities associated with borehole drilling and sampling of the 100-N Hanford Generating Plant (HGP) Settling Pond and will serve as a field guide for those performing the work. It should be used in conjunction with the Environmental Investigations and Site Characterization Manual (WHC 1988a) for specific procedures. The borehole location is shown in Figure 1. The settling pond, the dimensions of which are 40 m by 16 m (131.3 ft by 52.5 ft), is located at the HGP adjacent to the 100-N Area. The pond received process water from the plant. The water contained trace oxygen scavenging conditioners such as morpholine, hydrazine, and ammonia. Surface radioactivity readings are 150 to 500 cpm. Trace levels of surface contamination are present. Drilling and sampling will be in accordance with procedures in the EII manual (WHC 1988a).

  16. The adsorption and reaction of vinyl acetate on Au/Pd(100) alloy surfaces

    SciTech Connect (OSTI)

    Li, Zhenjun [Pacific Northwest National Laboratory (PNNL); Calaza, Florencia C [ORNL; Tysoe, Wilfred [University of Wisconsin, Milwaukee

    2012-01-01

    The surface chemistry of vinyl acetate monomer (VAM) is studied on Au/Pd(100) alloys as a function of alloy composition using temperature-programmed desorption and reflection adsorption infrared spectroscopy. VAM adsorbs weakly on isolated palladium sites on the alloy with a heat of adsorption of ~55 kJ/mol, with the plane of the VAM adsorbed close to parallel to the surface. The majority of the VAM adsorbed on isolated sites desorbs molecularly with only a small portion decomposing. At lower gold coverages (below ~0.5 ML of gold), where palladium palladium bridge sites are present, VAM binds to the surface in a distorted geometry via a rehybridized vinyl group. A larger proportion of this VAM decomposes and this reaction is initiated by C\\O bond scission in the VAM to form adsorbed acetate and vinyl species. The implication of this surface chemistry for VAM synthesis on Au/Pd(100) alloys is discussed.

  17. High-power beam injectors for 100 KW free-electron lasers

    SciTech Connect (OSTI)

    Todd, A. M.; Wood R. L.; Bluem, H.; Young, L. M.; Wiseman, M.; Schultheiss, T.; Schrage, D. L.; Russell, S. J.; Rode, C. H.; Rimmer, R.; Nguyen, D. C.; Kelley, J. P.; Kurennoy, S.; wood, r

    2003-01-01

    A key technology issue on the path to high-power FEL operation is the demonstration of reliable, high-brightness, high-power injector operation. We describe two ongoing programs to produce 100 mA injectors as drivers for 100 kW free-electron lasers. In one approach, in collaboration with the Thomas Jefferson National Accelerator Facility, we are fabricating a 750 MHz superconducting RF cryomodule that will be integrated with a room-temperature DC photocathode gun and tested at the Laboratory. In the other approach, in collaboration with Los Alamos National Laboratory, a high-current 700 MHz, normal-conducting, RF photoinjector is being designed and will undergo thermal management testing at the Laboratory. We describe the design, the projected performance and the status of both injectors.

  18. PNNL Apatite Investigation at 100-NR-2 Quality Assurance Project Plan

    SciTech Connect (OSTI)

    Fix, N. J.

    2009-04-02

    In 2004, the U.S. Department of Energy, Fluor Hanford, Inc., Pacific Northwest National Laboratory (PNNL), and the Washington Department of Ecology agreed that the long-term strategy for groundwater remediation at the 100-N Area would include apatite sequestration as the primary treatment, followed by a secondary treatment if necessary. Since then, the agencies have worked together to agree on which apatite sequestration technology has the greatest chance of reducing strontium-90 flux to the Columbia River. This Quality Assurance Project Plan provides the quality assurance requirements and processes that will be followed by staff working on the PNNL Apatite Investigation at 100-NR-2 Project. The plan is designed to be used exclusively by project staff.

  19. Pathways for Ethanol Dehydrogenation and Dehydration Catalyzed by Ceria (111) and (100) Surfaces

    SciTech Connect (OSTI)

    Beste, Ariana; Overbury, Steven {Steve} H

    2015-01-01

    We have performed computations to better understand how surface structure affects selectivity in dehydrogenation and dehydration reactions of alcohols. Ethanol reactions on the (111) and (100) ceria surfaces were studied starting from the dominant surface species, ethoxy. We used DFT (PBE+U) to explore reaction pathways leading to ethylene and acetaldehyde and calculated estimates of rate constants employing transition state theory. To assess pathway contributions, we carried out kinetic analysis. Our results show that intermediate and transition state structures are stabilized on the (100) surface compared to the (111) surface. Formation of acetaldehyde over ethylene is kinetically and thermodynamically preferred on both surfaces. Our results are consistent with temperature programmed surface reaction and steady-state experiments, where acetaldehyde was found as the main product and evidence was presented that ethylene formation at higher temperature originates from changes in adsorbate and surface structure.

  20. Environmental assessment of SP-100 ground engineering system test site: Hanford Site, Richland, Washington

    SciTech Connect (OSTI)

    Not Available

    1988-12-01

    The US Department of Energy (DOE) proposes to modify an existing reactor containment building (decommissioned Plutonium Recycle Test Reactor (PRTR) 309 Building) to provide ground test capability for the prototype SP-100 reactor. The 309 Building (Figure 1.1) is located in the 300 Area on the Hanford Site in Washington State. The National Environmental Policy Act (NEPA) requires that Federal agencies assess the potential impacts that their actions may have on the environment. This Environmental Assessment describes the consideration given to environmental impacts during reactor concept and test site selection, examines the environmental effects of the DOE proposal to ground test the nuclear subsystem, describes alternatives to the proposed action, and examines radiological risks of potential SP-100 use in space. 73 refs., 19 figs., 7 tabs.

  1. NREL: Technology Deployment - Fossil Fuel Dependency Falls from 100% to 56%

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on Alcatraz Island Fossil Fuel Dependency Falls from 100% to 56% on Alcatraz Island News Solar Cells Light Up Prison Cells on 'The Rock' Sponsors U.S. National Park Service American Recovery and Reinvestment Act Key Partners National Park Service Golden Gate National Recreation Area National Park Service Denver Services Center Princeton Power Inc. University of Washington Lawrence Berkeley National Laboratory U.S. DOE Federal Energy Management Program Related Stories U.S. Virgin Islands

  2. Combined Heat and Power System Enables 100% Reliability at Leading Medical Campus

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    RECOVERY ACT CASE STUDY The Texas Medical Center has 162 buildings on nearly 1,000 acres. Photo courtesy of Thermal Energy Corporation Combined Heat and Power System Enables 100% Reliability at Leading Medical Campus Recovery Act Funding Supports CHP Thermal Energy Corporation (TECO) is demonstrating a high-efficiency combined heat and power (CHP) system at the Texas Medical Center in Houston, Texas. TECO received $10 million in U.S. Department of Energy funding from the American Recovery and

  3. VP 100: Illinois Wind Farm Breathes New Life Into Businesses | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Illinois Wind Farm Breathes New Life Into Businesses VP 100: Illinois Wind Farm Breathes New Life Into Businesses September 23, 2010 - 12:46pm Addthis The Streator Cayuga Ridge South Wind Farm has 300 MW capacity of electricity. | Photo courtesy of Greater Livingston County Economic Development Council The Streator Cayuga Ridge South Wind Farm has 300 MW capacity of electricity. | Photo courtesy of Greater Livingston County Economic Development Council Stephen Graff Former Writer

  4. VP 100: UQM revving up electric motor production | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    UQM revving up electric motor production VP 100: UQM revving up electric motor production July 15, 2010 - 9:06am Addthis UQM will manufacture electric vehicle propulsion systems like this at its new facility in Longmont, Colo. | Photo courtesy of UQ UQM will manufacture electric vehicle propulsion systems like this at its new facility in Longmont, Colo. | Photo courtesy of UQ Paul Lester Paul Lester Digital Content Specialist, Office of Public Affairs Business is booming at UQM Technologies, a

  5. 100 Area D4 Project Building Completion Report May 2006 - June 2007

    SciTech Connect (OSTI)

    E. G. Ison

    2007-07-25

    This report documents the decontamination and decommissioning (D&D) and the demolition of the 153-N, 1515-N, 1516-N, 1517-N, 1518-N, 1519-N, 1331-N, 1332-N, and 181-NC facilities in the 100 Area of the Hanford Site. The D&D and demolition of these facilities included characterization, engineering, removal of hazardous and radiologically contaminated materials, equipment removal, utility disconnection, deactivation, decontamination, demolition of the structure, and removal of the remaining slabs.

  6. February 26, 2014 in 100E Hildebrand Hall | Center for Gas

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SeparationsRelevant to Clean Energy Technologies | Blandine Jerome February 26, 2014 in 100E Hildebrand Hall Previous Next List Dawei Feng (Dept. of Chemistry, Texas A&M University) Alkylamine-Tethered Porous Polymer Networks for CO2 Capture Walter Drisdell (Materials Sciences Division, LBNL) Investigating CO2 Adsorption in an Amine-Appended Metal-Organic Framework using NEXAFS Spectroscopy

  7. COLLOQUIUM: Spitzer's 100th: Founding PPPL & Pioneering Work in Fusion

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy | Princeton Plasma Physics Lab December 4, 2013, 4:15pm to 5:30pm Colloquia MBG Auditorium COLLOQUIUM: Spitzer's 100th: Founding PPPL & Pioneering Work in Fusion Energy Dr. Greg Hammett Princeton University Professor Russell Kulsrud Princeton University Abstract: PDF icon COLL.12.04.13B.pdf Lyman Spitzer, Jr. made major contributions in several fields of astrophysics, plasma physics, and fusion energy. He invented the novel stellarator concept for confining plasmas for fusion, and

  8. R&D 100: Innovations That Could Save Consumers Money | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Innovations That Could Save Consumers Money R&D 100: Innovations That Could Save Consumers Money July 24, 2013 - 5:55pm Addthis Pictured is Oak Ridge National Laboratory's water heating testing facility. Researchers estimate that 10 months of constant operation in its testing facility is comparable to 10 years of service life in a typical residential setting. | Photo courtesy of the Building Technologies Research and Integration Center, ORNL. Pictured is Oak Ridge National Laboratory's water

  9. Optics solutions for pp operation with electron lenses at 100 GeV

    SciTech Connect (OSTI)

    White, S.; Fischer, W.; Luo, Y.

    2014-07-12

    Electron lenses for head-on compensation are currently under commissioning and foreseen to be operational for the 2015 polarized proton run. These devices will provide a partial compensation of head-on beam-beam effects and allow to double the RHIC proton luminosity. This note reviews the optics constraints related to beam-beam compensation and summarizes the current lattice options for proton operation at 100 GeV.

  10. [100] or [110] aligned, semiconductor-based, large-area, flexible, electronic devices

    SciTech Connect (OSTI)

    Goyal, Amit

    2015-03-24

    Novel articles and methods to fabricate the same resulting in flexible, large-area, [100] or [110] textured, semiconductor-based, electronic devices are disclosed. Potential applications of resulting articles are in areas of photovoltaic devices, flat-panel displays, thermophotovoltaic devices, ferroelectric devices, light emitting diode devices, computer hard disc drive devices, magnetoresistance based devices, photoluminescence based devices, non-volatile memory devices, dielectric devices, thermoelectric devices and quantum dot laser devices.

  11. Semiconductor-based, large-area, flexible, electronic devices on {110}<100> oriented substrates

    SciTech Connect (OSTI)

    Goyal, Amit

    2014-08-05

    Novel articles and methods to fabricate the same resulting in flexible, oriented, semiconductor-based, electronic devices on {110}<100> textured substrates are disclosed. Potential applications of resulting articles are in areas of photovoltaic devices, flat-panel displays, thermophotovoltaic devices, ferroelectric devices, light emitting diode devices, computer hard disc drive devices, magnetoresistance based devices, photoluminescence based devices, non-volatile memory devices, dielectric devices, thermoelectric devices and quantum dot laser devices.

  12. Containing A Star On Earth: Understanding Turbulence At 100 Million Degrees

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | Princeton Plasma Physics Lab 1, 2014, 9:00am to 11:00am Science On Saturday MBG Auditorium Containing A Star On Earth: Understanding Turbulence At 100 Million Degrees Dr. Walter Guttenfelder, Research Physicist Princeton Plasma Physics Laboratory Presentation: PDF icon Guttenfelder_Science_on_Saturday_2014_1.pdf One of the principal challenges remaining for realizing magnetic fusion energy is to understand and mitigate the chaotic flows of ionized gas, or plasma, that lead to unacceptable

  13. Overview of free-piston Stirling SP-100 activities at the NASA Lewis Research Center

    SciTech Connect (OSTI)

    Slaby, J.G.

    1986-01-01

    An overview of the National Aeronautics and Space Administration (NASA) Lewis Research Center (LeRC) SP-100 free-piston Stirling engine activities is presented. These activities are being conducted in support of the Department of Defense (DOD), Department of Energy (DOE), and NASA. The space-power technology effort, under SP-100, addresses the status of the 25 kWe Space Power Demonstrator Engine (SPDE). Another facet of the SP-100 project covers the status of an endurance test. Dynamic balancing of the SPDE engine will be discussed along with a summary covering the parametric results of a study showing the relationship between power-converter specific weight and efficiency both as a function of Stirling engine heater to cooler temperature ratio. Design parameters and conceptual design features will be presented for a 25 kWe, single-cylinder free-piston Stirling space-power converter. And finally, a description of a hydrodynamic gas bearing concept will be presented.

  14. Design considerations for 100 MJ class flux compression pulse power systems

    SciTech Connect (OSTI)

    Reinovsky, R.E.; Lindemuth, I.R.

    1993-10-01

    With the cost of high performance, capacitor-discharge, pulse power systems continuing around $1--2 per joule and with energy requirements for experiments such as fast compression of magnetized plasmas ranging to 100 MJ and beyond, the need for economical, super-energy pulse power systems is being recognized. Explosively powered flux compressors, capable of delivering 100 MJ to a plasma physics experiment, can be designed, fabricated, and fielded at costs of less than $0.01J per shot. While less economical than laboratory pulsed power systems, if system life exceeds a few hundred full-energy shots, explosive pulse power techniques allow initial experiments to be performed quickly and economically at energies that are prohibitively costly, and hence unavailable, using conventional techniques. A variety of configurations for flux compressors suitable for 100-MJ operation can be considered. Among these, the disk configuration, pioneered by researchers at the All Russian Institute of Experimental Physics has demonstrated both high current and high energy capabilities.

  15. 100-OL-1 Operable Unit Pilot Study: XRF Evaluation of Select Pre-Hanford Orchards

    SciTech Connect (OSTI)

    Bunn, Amoret L.; Fritz, Brad G.; Pulsipher, Brent A.; Gorton, Alicia M.; Bisping, Lynn E.; Brandenberger, Jill M.; Pino, Christian; Martinez, Dominique M.; Rana, Komal; Wellman, Dawn M.

    2014-11-20

    Prior to the acquisition of land by the U.S. Department of War in February 1943 and the creation of the Hanford Site, the land along the Columbia River was home to over 1000 people. Farming and orchard operations by both homesteaders and commercial organizations were prevalent. Orchard activities and the associated application of lead arsenate pesticide ceased in 1943, when residents were moved from the Hanford Site at the beginning of the Manhattan Project. Today, the residues from historical application of lead arsenate pesticide persist in some locations on the Hanford Site. In 2012, the U.S. Department of Energy, U.S. Environmental Protection Agency, and Washington State Department of Ecology established the 100-OL-1 Operable Unit (OU) through the Hanford Federal Facility Agreement and Consent Order, known as the Tri-Party Agreement. The pre-Hanford orchard lands identified as the 100-OL-1 OU are located south of the Columbia River and east of the present-day Vernita Bridge, and extend southeast to the former Hanford townsite. The discontinuous orchard lands within 100-OL-1 OU are approximately 20 km2 (5000 ac). A pilot study was conducted to support the approval of the remedial investigation/feasibility study work plan to evaluate the 100-OL-1 OU. This pilot study evaluated the use of a field portable X-ray fluorescence (XRF) analyzer for evaluating lead and arsenic concentrations on the soil surface as an indicator of lead arsenate pesticide residues in the OU. The objectives of the pilot study included evaluating a field portable XRF analyzer as the analytical method for decision making, estimating the nature and extent of lead and arsenic in surface soils in four decision units, evaluating the results for the purpose of optimizing the sampling approach implemented in the remedial investigation, and collecting information to improve the cost estimate and planning the cultural resources review for sampling activities in the remedial investigation. Based on the results of the pilot study, the recommendations for the revision of the work plan are as follows: • characterize the surface soil using field portable XRF measurements with confirmatory inductively coupled plasma mass spectroscopy sampling for the remedial investigation • establish decision units of similar defined areas • establish a process for field investigation of soil concentrations exceeding the screening criteria at the border of the 100-OL-1 OU • define data quality objectives for the work plan using the results of the pilot study and refining the sampling approach for the remedial investigation.

  16. Limited field investigation report for the 100-HR-1 Operable Unit

    SciTech Connect (OSTI)

    Not Available

    1994-08-01

    This limited field investigation (LFI) report summarizes the data collection and analysis activities conducted during the 100-HR-1 Source Operable Unit LFI and the associated qualitative risk assessment (QRA) (WHC 1993a), and makes recommendations on the continued candidacy of high-priority sites for interim remedial measures (IRM). The results and recommendations presented in this report are generally independent of future land use scenarios. A LFI Report is required, in accordance with the HPPS, when waste sites are to be considered for IRMs. The LFI is an integral part of the remedial investigation/feasibility study (RI/FS) or Resource Conservation and Recovery Act (RCRA) facility investigation/corrective measures study (RFI/CMS) and process and functions as a focused RI or RFI for selection of IRMs. The purpose of the report is to identify those sites that are recommended to remain as candidates for IRMs, provide a preliminary summary of site characterization studies, refine the conceptual model as needed, identify contaminant- and location-specific applicable or relevant and appropriate requirements (ARA), and provide a qualitative assessment of the risks associated with the sites. This assessment includes consideration of whether contaminant concentrations pose an unacceptable risk that warrants action through IRMs. The 100-HR-1 unit encompasses approximately 100 acres adjacent to the Columbia River shoreline. It contains waste units associated with the original plant facilities constructed to support the H Reactor. The area also contains evaporation basins which received liquid process wastes and nonroutine deposits of chemical wastes from the 300 Area, where fuel elements for the N Reactor were produced.

  17. Pilot-scale treatability test plan for the 100-HR-3 operable unit

    SciTech Connect (OSTI)

    Not Available

    1994-08-01

    This document presents the treatability test plan for pilot-scale pump-and-treat testing at the 100-HR-3 Operable Unit. The test will be conducted in fulfillment of interim Milestone M-15-06E to begin pilot-scale pump-and-treat operations by August 1994. The scope of the test was determined based on the results of lab/bench-scale tests (WHC 1993a) conducted in fulfillment of Milestone M-15-06B. These milestones were established per agreement between the U.S. Department of Energy (DOE), the Washington State Department of Ecology and the U.S. Environmental Protection Agency (EPA), and documented on Hanford Federal of Ecology Facility Agreement and Consent Order Change Control Form M-15-93-02. This test plan discusses a pilot-scale pump-and-treat test for the chromium plume associated with the D Reactor portion of the 100-HR-3 Operable Unit. Data will be collected during the pilot test to assess the effectiveness, operating parameters, and resource needs of the ion exchange (IX) pump-and-treat system. The test will provide information to assess the ability to remove contaminants by extracting groundwater from wells and treating extracted groundwater using IX. Bench-scale tests were conducted previously in which chromium VI was identified as the primary contaminant of concern in the 100-D reactor plume. The DOWEX 21K{trademark} resin was recommended for pilot-scale testing of an IX pump-and-treat system. The bench-scale test demonstrated that the system could remove chromium VI from groundwater to concentrations less than 50 ppb. The test also identified process parameters to monitor during pilot-scale testing. Water will be re-injected into the plume using wells outside the zone of influence and upgradient of the extraction well.

  18. Remedial investigation/feasibility study work plan for the 100-KR-4 operable unit, Hanford Site, Richland, Washington

    SciTech Connect (OSTI)

    Not Available

    1992-09-01

    Four areas of the Hanford Site (the 100, 200, 300, and 1100 Areas) have been included on the US Environmental Protection Agency`s (EPA`s) National Priorities List (NPL) under the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). This work plan and the attached supporting project plans establish the operable unit setting and the objectives, procedures, tasks, and schedule for conducting the CERCLA remedial investigation/feasibility study (RI/FS) for the 100-KR-4 operable unit. The 100-K Area consists of the 100-KR-4 groundwater operable unit and three source operable units. The 100-KR-4 operable unit includes all contamination found in the aquifer soils and water beneath the 100-K Area. Source operable units include facilities and unplanned release sites that are potential sources of contamination.

  19. Electron-beam induced variation of surface profile in amorphous As{sub 20}Se{sub 80} films

    SciTech Connect (OSTI)

    Kaganovskii, Yu. E-mail: trunov.m@gmail.com; Trunov, M. L. E-mail: trunov.m@gmail.com; Cserhati, C.; Beke, D. L.; Kknyesi, S.

    2014-05-14

    Unusual profile variation of holographic surface relief gratings is detected in thin (2??m) As{sub 20}Se{sub 80} chalcogenide films under e-beam irradiation: gratings of small periods were smoothed, whereas the gratings of larger periods increased their amplitudes. Irradiation was carried out in SEM, with 20?kV voltage and 8?nA current; the profiles of the irradiated areas were analyzed both by AFM and SEM. It is found that the kinetics of both flattening and growth followed by exponential law and took place due to lateral mass transport accelerated by e-irradiation. It is shown that the profile variation is mainly caused by competition between capillary forces and chemical forces induced by broken and deformed atomic bonds under e-beam irradiation. The kinetics of profile variation was calculated assuming that the mechanism of e-beam induced mass transfer is volume diffusion. The diffusion coefficients were estimated from the experimental data using theoretical expressions derived.

  20. Effect of the spin-twist structure on the spin-wave dynamics in Fe{sub 55}Pt{sub 45}/Ni{sub 80}Fe{sub 20} exchange coupled bi-layers with varying Ni{sub 80}Fe{sub 20} thickness

    SciTech Connect (OSTI)

    Pal, Semanti; Barman, Saswati Barman, Anjan; Hellwig, Olav

    2014-05-07

    We have investigated optically induced ultrafast magnetization dynamics of a series of Fe{sub 55}Pt{sub 45}/Ni{sub 80}Fe{sub 20} exchange spring bi-layers with varying Ni{sub 80}Fe{sub 20} thickness. Rich spin-wave spectra are observed; whose frequency shows a strong dependence on the Ni{sub 80}Fe{sub 20} layer thickness. Micromagnetic simulations based on a simplified magnetic microstructure were able to reproduce the experimental data qualitatively. The spin twist structure introduced in the Ni{sub 80}Fe{sub 20} layer gives rise to new modes in the composite system as opposed to the bare Ni{sub 80}Fe{sub 20} films.

  1. Design considerations for a 100 kW c-w, 140 GHz gyrotron oscillator

    SciTech Connect (OSTI)

    Felch, K.; Bier, R.; Fox, L.; Huey, H.; Ives, L.; Jory, H.; Spang, S.

    1984-01-01

    A gyrotron oscillator capable of generating 100 kW of c-w power is currently under development at Varian. The tube is being designed for operation in the TE/sup 0//sub 031/ cavity mode with the electron beam located at the second radial electric field maximum in the cavity. The electron beam will be produced by a magnetron injection gun and the 56 kG magnetic field required for 140 GHz operation will be provided by a superconducting magnet. Initial design calculations for the important elements of the tube are reported and the various technology issues of the tube design are discussed.

  2. Table 5. Greenhouse gases and 100-year net global warming potentials

    U.S. Energy Information Administration (EIA) Indexed Site

    Greenhouse gases and 100-year net global warming potentials" "Greenhouse Gas Name","Formula","GWP" ,,"SAR1","TAR2","AR43" "(1) Carbon Dioxide","CO2",1,1,1 "(2) Methane","CH4",21,23,25 "(3) Nitrous Oxide","N2O",310,296,298 "(4) Hydroflourocarbons" "HFC-23 (trifluoromethane)","CHF3",11700,12000,14800 "HFC-32

  3. VP 100: Growth in solar means growth in Ohio | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Growth in solar means growth in Ohio VP 100: Growth in solar means growth in Ohio October 6, 2010 - 10:57am Addthis DuPont is betting on major growth in the market for solar energy -- and therefore for its Tedlar film, a durable backing for silicon solar panels. | Photo Courtesy of DuPont DuPont is betting on major growth in the market for solar energy -- and therefore for its Tedlar film, a durable backing for silicon solar panels. | Photo Courtesy of DuPont Lorelei Laird Writer, Energy

  4. VP 100: President Obama Hails Electric-Vehicle Battery Plant | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy President Obama Hails Electric-Vehicle Battery Plant VP 100: President Obama Hails Electric-Vehicle Battery Plant July 15, 2010 - 5:05pm Addthis Stephen Graff Former Writer & editor for Energy Empowers, EERE What does this project do? Puts the U.S. in position to produce 40 percent of the world's supply of advanced batteries by 2015 - up from it's current level of 2 percent Makes us less dependent on foreign oil Creates jobs in an emerging sector of manufacturing The

  5. Structure of an n-butane monolayer adsorbed on magnesium oxide (100)

    SciTech Connect (OSTI)

    Arnold, T.; Chanaa, S.; Cook, R. E.; Clarke, S. M.; Larese, J. Z.

    2006-08-15

    Neutron diffraction has been used to characterize the structure of the solid phase of the completed monolayer of n butane on the MgO(100) surface at low temperature. The monolayer is found to adopt a commensurate (7{radical}(2)x{radical}(2)R45 deg. ) structure with lattice constants a=29.47 A ring and b=4.21 A ring , P{sub 2gg} symmetry and four molecules in the unit cell. Excellent agreement with the experimental diffraction pattern is realized, using a Lorenztian profile to describe the line shape.

  6. Adsorption and thermal treatments of 1-dodecene on Si(100) investigated by STM

    SciTech Connect (OSTI)

    Liu, H. W.; Fujikawa, Y.; Sadowski, J. T.; Xue, Q. -K.; Sakurai, T.

    2015-03-01

    We investigate the atomic behaviour of long-chain 1-dodecene adsorbed on Si(100) using a scanning tunnelling microscope with an exposure of 30 to 2.4 Langmuirs. Unlike previous reports on short-chain molecules, remarkable self-ordered assembly of molecules is not observed at room temperature, which is possibly attributed to the asymmetric molecular structure with long chains of 1-dodecene. After annealing at 500580 C, ordered patterns form with a c(4 4) structure, accompanied with thermal decomposition of molecules.

  7. PPPL wins R&amp;D 100 Award | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PPPL wins R&D 100 Award By Kitta MacPherson June 21, 2012 Tweet Widget Google Plus One Share on Facebook Award winners: (left to right) Jon Menard, the NSTX program director, and Vlad Soukhanovskii, who designed and led the experiments. (Photo by Elle Starkman, PPPL Office of Communications) Award winners: (left to right) Jon Menard, the NSTX program director, and Vlad Soukhanovskii, who designed and led the experiments. Gallery: Egemen Kolemen Egemen Kolemen Joon-Wook Ahn Joon-Wook Ahn A

  8. 100 years of Elementary Particles [Beam Line, vol. 27, issue 1, Spring 1997

    DOE R&D Accomplishments [OSTI]

    Pais, Abraham; Weinberg, Steven; Quigg, Chris; Riordan, Michael; Panofsky, Wolfgang K. H.; Trimble, Virginia

    1997-04-01

    This issue of Beam Line commemorates the 100th anniversary of the April 30, 1897 report of the discovery of the electron by J.J. Thomson and the ensuing discovery of other subatomic particles. In the first three articles, theorists Abraham Pais, Steven Weinberg, and Chris Quigg provide their perspectives on the discoveries of elementary particles as well as the implications and future directions resulting from these discoveries. In the following three articles, Michael Riordan, Wolfgang Panofsky, and Virginia Trimble apply our knowledge about elementary particles to high-energy research, electronics technology, and understanding the origin and evolution of our Universe.

  9. Neutronics and safety characteristics of a 100% MOX fueled PWR using weapons grade plutonium

    SciTech Connect (OSTI)

    Biswas, D.; Rathbun, R.; Lee, Si Young; Rosenthal, P.

    1993-12-31

    Preliminary neutronics and safety studies, pertaining to the feasibility of using 100% weapons grade mixed-oxide (MOX) fuel in an advanced PWR Westinghouse design are presented in this paper. The preliminary results include information on boron concentration, power distribution, reactivity coefficients and xenon and control rode worth for the initial and the equilibrium cycle. Important safety issues related to rod ejection and steam line break accidents and shutdown margin requirements are also discussed. No significant change from the commercial design is needed to denature weapons-grade plutonium under the current safety and licensing criteria.

  10. Project T100 -- Hazardous Materials Management and Emergency Response Training Center (HAMMER)

    SciTech Connect (OSTI)

    Norton, C.E.

    1994-11-09

    The scope of this Quality Assurance Program Plan (QAPP) is to provide a system of Quality Assurance reviews and verifications on the design and construction of the Hazardous Materials Management and Emergency Response (HAMMER) Training Center, project 95L-EWT-100 at Hanford. The reviews and verifications will be on activities associated with design, procurement, and construction of the HAMMER project which includes, but is not limited to earthwork, placement of concrete, laying of rail, drilling of wells, water and sewer line fabrication and installation, communications systems, fire protection/detection systems, line tie-ins, building and mock-up (prop) construction, electrical, instrumentation, pump and valves and special coatings.

  11. DOE National Laboratory Research Projects Win 31 R&D 100 Awards for 2007 |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    U.S. DOE Office of Science (SC) DOE National Laboratory Research Projects Win 31 R&D 100 Awards for 2007 News News Home Featured Articles Science Headlines 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 Science Highlights Presentations & Testimony News Archives Communications and Public Affairs Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 10.19.07 DOE National Laboratory Research

  12. ESnet's On-Demand Bandwidth Reservation Service Wins R&D 100 Award

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    On-Demand Bandwidth Reservation Service Wins R&D 100 Award News & Publications ESnet News Media & Press Publications and Presentations Galleries ESnet Awards and Honors Contact Us Media Jon Bashor, jbashor@lbl.gov, +1 510 486 5849 or Media@es.net Technical Assistance: 1 800-33-ESnet (Inside the US) 1 800-333-7638 (Inside the US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback: info@es.net ESnet's On-Demand

  13. 100 years of elementary particles [Beam Line, vol. 27, issue 1, Spring 1997

    SciTech Connect (OSTI)

    Pais, Abraham; Weinberg, Steven; Quigg, Chris; Riordan, Michael; Panofsky, Wolfgang K.H.; Trimble, Virginia

    1997-04-01

    This issue of Beam Line commemorates the 100th anniversary of the April 30, 1897 report of the discovery of the electron by J.J. Thomson and the ensuing discovery of other subatomic particles. In the first three articles, theorists Abraham Pais, Steven Weinberg, and Chris Quigg provide their perspectives on the discoveries of elementary particles as well as the implications and future directions resulting from these discoveries. In the following three articles, Michael Riordan, Wolfgang Panofsky, and Virginia Trimble apply our knowledge about elementary particles to high-energy research, electronics technology, and understanding the origin and evolution of our Universe.

  14. Adsorption and thermal treatments of 1-dodecene on Si(100) investigated by STM

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Liu, H. W.; Fujikawa, Y.; Sadowski, J. T.; Xue, Q. -K.; Sakurai, T.

    2015-03-01

    We investigate the atomic behaviour of long-chain 1-dodecene adsorbed on Si(100) using a scanning tunnelling microscope with an exposure of 30 to 2.4 Langmuirs. Unlike previous reports on short-chain molecules, remarkable self-ordered assembly of molecules is not observed at room temperature, which is possibly attributed to the asymmetric molecular structure with long chains of 1-dodecene. After annealing at 500–580 °C, ordered patterns form with a c(4 × 4) structure, accompanied with thermal decomposition of molecules.

  15. Surface and interfacial reaction study of InAs(100)-crystalline oxide interface

    SciTech Connect (OSTI)

    Zhernokletov, D. M.; Laukkanen, P.; Dong, H.; Brennan, B.; Kim, J.; Galatage, R. V.; Yakimov, M.; Tokranov, V.; Oktyabrsky, S.; Wallace, R. M.; Department of Materials Science and Engineering, University of Texas at Dallas, Richardson, Texas 75080

    2013-05-27

    A crystalline oxide film on InAs(100) is investigated with in situ monochromatic x-ray photoelectron spectroscopy and low energy electron diffraction before and after in situ deposition of Al{sub 2}O{sub 3} by atomic layer deposition (ALD) as well as upon air exposure. The oxidation process leads to arsenic and indium trivalent oxidation state formation. The grown epitaxial oxide-InAs interface is stable upon ALD reactor exposure; however, trimethyl aluminum decreases oxidation states resulting in an unreconstructed surface. An increase in oxide concentration is also observed upon air exposure suggesting the crystalline oxide surface is unstable.

  16. Observation of surface to bulk interatomic Auger decay from Ta(100)

    SciTech Connect (OSTI)

    Jensen, E. ); Bartynski, R.A. ); Weinert, M. ); Hulbert, S.L.; Johnson, E.D.; Garrett, R.F. )

    1990-06-15

    Core-valence-valence ({ital CVV}) Auger spectra from Ta(100) taken in coincidence with bulk and surface-shifted 4{ital f}{sub 7/2} core-level emission are presented. These data are compared with self-convolutions of calculations of the {ital d}-band densities of states for the surface and subsurface layers of a nine-layer slab. Agreement of the bulk spectrum with the calculation is good; agreement for the surface spectrum is very poor. These data are explained by proposing an interatomic surface to bulk Auger decay mode for the surface core hole that is competitive with the conventional {ital CVV} decay process.

  17. Remedial investigation/feasibility study work plan for the 100-BC-2 operable unit, Hanford Site, Richland, Washington

    SciTech Connect (OSTI)

    Not Available

    1993-05-01

    This work plan and attached supporting project plans establish the operable unit setting and the objectives, procedures, tasks, and schedule for conducting the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) remedial investigation/feasibility study (RI/FS) for the 100-BC-2 operable unit in the 100 Area of the Hanford Site. The 100 Area is one of four areas at the Hanford Site that are on the US Environmental Protection Agency`s (EPA) National Priorities List under CERCLA. The 100-BC-2 operable unit is one of two source operable units in the 100-B/C Area (Figure ES-1). Source operable units are those that contain facilities and unplanned release sites that are potential sources of hazardous substance contamination. The 100-BC-2 source operable unit contains waste sites that were formerly in the 100-BC-2, 100-BC-3, and 100-BC-4 operable units. Because of their size and geographic location, the waste sites from these two operable units were added to 100-BC-2. This allows for a more efficient and effective investigation of the remaining 100-B/C Reactor area waste sites. The investigative approach to waste sites associated with the 100-BC-2 operable unit are listed in Table ES-1. The waste sites fall into three general categories: high priority liquid waste disposal sites, low priority liquid waste disposal sites, and solid waste burial grounds. Several sites have been identified as candidates for conducting an IRM. Two sites have been identified as warranting additional limited field sampling. The two sites are the 116-C-2A pluto crib, and the 116-C-2C sand filter.

  18. BETO-Funded Algae Project at NREL Named a Finalist for 2015 R&D 100 Awards

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy BETO-Funded Algae Project at NREL Named a Finalist for 2015 R&D 100 Awards BETO-Funded Algae Project at NREL Named a Finalist for 2015 R&D 100 Awards August 13, 2015 - 4:44pm Addthis Cyanobacteria cultures. Photo by Dennis Schroeder/NREL. Cyanobacteria cultures. Photo by Dennis Schroeder/NREL. The R&D 100 Awards, presented annually by R&D Magazine, recognize 100 of the most innovative technologies and services of the year across nine categories and are

  19. Relic neutralino surface at a 100 TeV collider

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bramante, Joseph; Fox, Patrick J.; Martin, Adam; Ostdiek, Bryan; Plehn, Tilman; Schell, Torben; Takeuchi, Michihisa

    2015-03-11

    We map the parameter space for minimal supersymmetric Standard Model neutralino dark matter which freezes out to the observed relic abundance, in the limit that all superpartners except the neutralinos and charginos are decoupled. In this space of relic neutralinos, we show the dominant dark matter annihilation modes, the mass splittings among the electroweakinos, direct detection rates, and collider cross sections. The mass difference between the dark matter and the next-to-lightest neutral and charged states is typically much less than electroweak gauge boson masses. With these small mass differences, the relic neutralino surface is accessible to a future 100 TeVmore » hadron collider, which can discover interneutralino mass splittings down to 1 GeV and thermal relic dark matter neutralino masses up to 1.5 TeV with a few inverse attobarns of luminosity. This coverage is a direct consequence of the increased collider energy: in the Standard Model events with missing transverse momentum in the TeV range have mostly hard electroweak radiation, distinct from the soft radiation shed in compressed electroweakino decays. As a result, we exploit this kinematic feature in final states including photons and leptons, tailored to the 100 TeV collider environment.« less

  20. Sampling and analysis plan for the 100-D Ponds voluntary remediation project

    SciTech Connect (OSTI)

    NONE

    1996-08-01

    This Sampling and Analysis Plan (SAP) describes the sampling and analytical activities which will be performed to support closure of the 100-D Ponds Resource Conservation and Recovery Act (RCRA) treatment, storage, and/or disposal (TSD) unit. This SAP includes the Field Sampling Plan (FSP) presented in Section 2.0, and the Quality Assurance Project Plan (QAPjP) described in Section 3.0. The FSP defines the sampling and analytical methodologies to be performed, and the QAPjP provides or includes information on the requirements for precision, accuracy, representativeness, comparability, and completeness of the analytical data. This sampling and analysis plan was developed using the Environmental Protection Agency`s Seven-Step Data Quality Objectives (DQO) Guidance (EPA, 1994). The purpose of the DQO meetings was (1) to identify the contaminants of concern and their cleanup levels under the Washington State Model Toxics Control Act (MTCA, WAC-173-340) Method B, and (2) to determine the number and locations of samples necessary to verify that the 100-D Ponds meet the cleanup criteria. The data collected will be used to support RCRA closure of this TSD unit.

  1. Problems associated with large scale personnel monitoring of photons using lithium-fluoride TLD-100

    SciTech Connect (OSTI)

    Not Available

    1985-01-01

    The dosimetric properties of a large batch of lithium fluoride TLD-100 dosimeters when exposed to photons for total absorbed doses in the region from 0.1-10 mGy (10-100 mr) have been examined in this work. This region is of particular importance because in many operational health physics situations the majority (>90%) of all recorded absorbed doses to personnel lie in this region. With the possibility that occupational radiation dose limits may be reduced in the future accurate monitoring of individuals in this region will be of prime importance. The purpose of this thesis was to point out several effects which could compromise accurate dosimetric measurements in this region and to suggest some methods to minimize them. These effects include the effect of TLD batch composition, overresponse of the dosimeter to low energy photons, dose rate effects, the effects of storing the dosimeter before readout, and possible interference from ultraviolet and radiofrequency radiation. Each of these items can cause errors which can range up to 70%, depending on the total absorbed dose and the particulars of the radiation exposure. One effect which is of extreme interest is the induction of a thermoluminescent signal by radiofrequency radiation. Although this effect can cause gross errors in estimating the ionizing dose, it opens the possibility that LiF or another phosphor may have an application as a non-ionizing radiation dosimeter.

  2. Relic neutralino surface at a 100 TeV collider

    SciTech Connect (OSTI)

    Bramante, Joseph; Fox, Patrick J.; Martin, Adam; Ostdiek, Bryan; Plehn, Tilman; Schell, Torben; Takeuchi, Michihisa

    2015-03-11

    We map the parameter space for minimal supersymmetric Standard Model neutralino dark matter which freezes out to the observed relic abundance, in the limit that all superpartners except the neutralinos and charginos are decoupled. In this space of relic neutralinos, we show the dominant dark matter annihilation modes, the mass splittings among the electroweakinos, direct detection rates, and collider cross sections. The mass difference between the dark matter and the next-to-lightest neutral and charged states is typically much less than electroweak gauge boson masses. With these small mass differences, the relic neutralino surface is accessible to a future 100 TeV hadron collider, which can discover interneutralino mass splittings down to 1 GeV and thermal relic dark matter neutralino masses up to 1.5 TeV with a few inverse attobarns of luminosity. This coverage is a direct consequence of the increased collider energy: in the Standard Model events with missing transverse momentum in the TeV range have mostly hard electroweak radiation, distinct from the soft radiation shed in compressed electroweakino decays. As a result, we exploit this kinematic feature in final states including photons and leptons, tailored to the 100 TeV collider environment.

  3. Ab initio study of semiconductor atoms impurities in zigzag edge (10,0) carbon nanotubes

    SciTech Connect (OSTI)

    Muttaqien, Fahdzi Suprijadi

    2015-04-16

    The substitutional impurities in zigzag edge (10,0) carbon nanotubes have been studied by using first principles calculations. Silicon (Si), gallium (Ga), and arsenic (As) atom have been chosen as semiconductor based-atom for replacing carbon atoms in CNTs surface. The silicon atom changes the energy gap of pristine zigzag (10,0) CNT, it is 0.19 eV more narrow than that of pristine CNT. Geometrically, the silicon atom creates sp{sup 3} bond with three adjacent carbon atoms, where the tetrahedral form of its sp{sup 3} bond is consisted of free unoccupied state. The silicon atom does not induce magnetism to zigzag CNT. Due to gallium (Ga) and arsenic (As) atom substitution, the zigzag CNT becomes metallic and has magnetic moment of 1?{sub B}. The valance and conduction band are crossed each other, then the energy gap is vanished. The electronic properties of GaAs-doped CNT are dominantly affected by gallium atom and its magnetic properties are dominantly affected by arsenic atom. These results prove that the CNT with desired properties can be obtained with substitutional impurities without any giving structural defect.

  4. A 50-100 kWe gas-cooled reactor for use on Mars.

    SciTech Connect (OSTI)

    Peters, Curtis D.

    2006-04-01

    In the space exploration field there is a general consensus that nuclear reactor powered systems will be extremely desirable for future missions to the outer solar system. Solar systems suffer from the decreasing intensity of solar radiation and relatively low power density. Radioisotope Thermoelectric Generators are limited to generating a few kilowatts electric (kWe). Chemical systems are short-lived due to prodigious fuel use. A well designed 50-100 kWe nuclear reactor power system would provide sufficient power for a variety of long term missions. This thesis will present basic work done on a 50-100 kWe reactor power system that has a reasonable lifespan and would function in an extraterrestrial environment. The system will use a Gas-Cooled Reactor that is directly coupled to a Closed Brayton Cycle (GCR-CBC) power system. Also included will be some variations on the primary design and their effects on the characteristics of the primary design. This thesis also presents a variety of neutronics related calculations, an examination of the reactor's thermal characteristics, feasibility for use in an extraterrestrial environment, and the reactor's safety characteristics in several accident scenarios. While there has been past work for space reactors, the challenges introduced by thin atmospheres like those on Mars have rarely been considered.

  5. From Tragedy to Triumph: Rebuilding Greensburg, Kansas To Be a 100% Renewable Energy City; Preprint

    SciTech Connect (OSTI)

    Pless, S.; Billman, L.; Wallach, D.

    2010-08-01

    On May 4, 2007, Greensburg, Kansas, was hit by a 1.7-mile wide tornado with 200 mph-plus wind speeds. This tornado destroyed or severely damaged 90% of Greensburg?s structures. We discuss the progress made in rebuilding Greensburg, with a focus on the built environment and on meeting Greensburg?s goal of 100% renewable energy, 100% of the time. We also discuss key disaster recovery efforts that enabled Greensburg to reach this goal. Key strategies included a Sustainable Comprehensive Master Plan, an ordinance resolving that city-owned buildings achieve LEED Platinum and 42% energy savings, a strong focus on rebuilding 'right' with an integrated design process, attracting significant and sustained technical experts and national media attention, and linking renewable and energy efficiency technologies to business development. After three years, more than half the homes that have been rebuilt are rated at an average of 40% energy savings. All significant commercial buildings, including the school, hospital, banks, courthouse, and retail buildings, have been rebuilt to LEED Gold and Platinum standards and exceed 40% savings, with many exceeding 50% savings. Greensburg recently constructed a 12.5-MW community wind farm to provide all the remaining energy needed for its energy-efficient buildings and homes.

  6. State companies dominate OGJ100 list of non-U. S. oil producers

    SciTech Connect (OSTI)

    Not Available

    1993-09-20

    State owned oil and gas companies dominate the OGJ100 list of non-U.S. producers. Because many of them report only operating information, companies on the worldwide list cannot be ranked by assets or revenues. The list, therefore, is organized regionally, based on location of companies' corporate headquarters. The leading nongovernment company in both reserves and production is Royal Dutch/Shell. It ranks sixth in the world in liquids production and 11th in liquids reserves, as it has for the past 2 years. British Petroleum is the next largest nongovernment company. BP ranks 11th in liquids production and 16th in liquids reserves. Elf Aquitaine, 55.8% government-controlled, ranked 17th in liquids production. AGIP was 20th in liquids production. Kuwait Petroleum returned to the list of top 20 producers, ranking 12th, as it restored production shut in by facilities damage sustained during the Persian Gulf crisis. New to the top 20 reserves list is Petroleo Brasileiro, which moved to 20th position. The top 20 companies in the OGJ100 held reserves estimated at 869.3 billion bbl in 1992 vs. 869.5 billion bbl in 1991 and 854.2 billion bbl in 1990.

  7. Evidence for decoupled electron and proton transfer in the electrochemical oxidation of ammonia on Pt(100)

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Katsounaros, Ioannis; Chen, Ting; Gewirth, Andrew A.; Markovic, Nenad M.; Koper, Marc T. M.

    2016-01-12

    The two traditional mechanisms of the electrochemical ammonia oxidation consider only concerted proton-electron transfer elementary steps and thus they predict that the rate–potential relationship is independent of the pH on the pH-corrected RHE potential scale. In this letter we show that this is not the case: the increase of the solution pH shifts the onset of the NH3-to-N2 oxidation on Pt(100) to lower potentials and also leads to higher surface concentration of formed NOad before the latter is oxidized to nitrite. Therefore, we present a new mechanism for the ammonia oxidation which incorporates a deprotonation step occurring prior to themore » electron transfer. The deprotonation step yields a negatively charged surface-adsorbed species which is discharged in a subsequent electron transfer step before the N–N bond formation. The negatively charged species is thus a precursor for the formation of N2 and NO. The new mechanism should be a future guide for computational studies aiming at the identification of intermediates and corresponding activation barriers for the elementary steps. As a result, ammonia oxidation is a new example of a bond-forming reaction on (100) terraces which involves decoupled proton-electron transfer.« less

  8. 100 Hour test of the pressurized woodchip-fired gravel bed combustor

    SciTech Connect (OSTI)

    Ragland, K.W.; Aerts, D.J.

    1992-08-01

    In this project a downdraft, packed bed combustor for a gas turbine cogeneration system using woodchips is being developed. The combustor is designed to promote intense combustion in a thin reaction zone and to control particulate growth by using high excess air. The combustor contains a magnesia and alumina gravel bed on top of which woodchips are fed. The following test objectives were established for the 100 hr test: (a) demonstrate preliminary durability of the combustor; (b) demonstrate steady operation of the system; (c) investigate combustor pressure drop; (d) investigate bed ash cake buildup; (e) expose metal alloy coupons for corrosion examination; (f) obtain closure within 10% on mass and energy balances; and (g) obtain emissions data. The plan for the 100 hr test was to operate the combustor at the following conditions: day 1, 4 atm (absolute) pressure and 700--800 C outlet temperature; day 2, 4 atm pressure and 800--900 C outlet temperature; day 3, 5 atm pressure and 800--900 C outlet temperature; days 4 and 5, repeat day 3. The inlet air was not preheated. The paper gives test results and discusses fuel characterization, combustor performance, mass and energy balance, emissions, composition of ash and deposits, and metal coupons representing turbine blade material.

  9. DOE responses to Ecology review comments for ``Sampling and analysis plans for the 100-D Ponds voluntary remediation project``

    SciTech Connect (OSTI)

    NONE

    1996-12-31

    The Sampling and Analysis Plan describes the sampling and analytical activities which will be performed to support closure of the 100-D Ponds at the Hanford Reservation. This report contains responses by the US Department of Energy to Ecology review for ``Sampling and Analysis Plan for the 100-D Ponds Voluntary Remediation Project.``

  10. First principles investigation of Ti adsorption and migration on Si(100) surfaces

    SciTech Connect (OSTI)

    Briquet, Ludovic G. V.; Wirtz, Tom; Philipp, Patrick

    2013-12-28

    The titanium adsorption on Si(100) is investigated using first principles computer modelling methods. Two new subsurface adsorption sites are described. They are located at the edge of the cavity topped by a surface silicon dimer. The migration of the titanium from the surface to the subsurface sites is facilitated when occurring via one of these sites. The ejection of one of the silicon atoms forming the surface dimer is also investigated. The actual step of the ejection requires more energy than previously thought although, when considering the global picture of a titanium atom on the surface leading to the ejection of a silicon atom, the overall rate is compensated by the facilitated migration of the titanium to the subsurface sites. The consecutive adsorption of a second and third titanium atom is also investigated. It is shown that titanium grows evenly on the surface in normal condition, showing no intermixing of the titanium and silicon beyond the silicon layer.

  11. A reliability and mass perspective of SP-100 Stirling cycle lunar-base powerplant designs

    SciTech Connect (OSTI)

    Bloomfield, H.S.

    1991-06-01

    The purpose was to obtain reliability and mass perspectives on selection of space power system conceptual designs based on SP-100 reactor and Stirling cycle power-generation subsystems. The approach taken was to: (1) develop a criterion for an acceptable overall reliability risk as a function of the expected range of emerging technology subsystem unit reliabilities; (2) conduct reliability and mass analyses for a diverse matrix of 800-kWe lunar-base design configurations employing single and multiple powerplants with both full and partial subsystem redundancy combinations; and (3) derive reliability and mass perspectives on selection of conceptual design configurations that meet an acceptable reliability criterion with the minimum system mass increase relative to reference powerplant design. The developed perspectives provided valuable insight into the considerations required to identify and characterize high-reliability and low-mass lunar-base powerplant conceptual design.

  12. 100-OL-1 Operable Unit Field Portable X-Ray Fluorescence (XRF) Analyzer Pilot Study Plans

    SciTech Connect (OSTI)

    Bunn, Amoret L.; Fritz, Brad G.; Wellman, Dawn M.

    2014-07-15

    A pilot study is being conducted to support the approval of the Remedial Investigation/Feasibility Study (RI/FS) Work Plan to evaluate the 100-OL-1 Operable Unit (OU) pre-Hanford orchard lands. Based on comments received by the U.S. Environmental Protection Agency (EPA) and Washington State Department of Ecology, the pilot study will evaluate the use of field portable X-ray fluorescence (XRF) spectrometry measurements for evaluating lead and arsenic concentrations on the soil surface as an indicator of past use of lead arsenate pesticide residue in the OU. The work will be performed in the field during the summer of 2014, and assist in the planning for the characterization activities in the RI/FS.

  13. Optimum parameters of TLD100 powder used for radiotherapy beams calibration check

    SciTech Connect (OSTI)

    Arib, M. . E-mail: mehenna.arib@comena-dz.org; Yaich, A.; Messadi, A.; Dari, F.

    2006-10-01

    External audit of the absorbed dose determination from radiotherapy machines is performed using Lithium fluoride (LiF) TLD-100. Optimal parameters needed to obtain highly accurate dosage from LiF powder was investigated, including the setup of the Harshaw 4000 reader. A linear correspondence between the thermoluminescent signal and the mass of the powder was observed, demonstrating that the dose can be evaluated with small samples of powder. The reproducibility of the thermoluminescence dosimeter (TLD) readings obtained with up to 10 samples from 1 capsule containing 160 mg of powder was around 1.5% (1 standard deviation [SD]). The time required for the manual evaluation of TLDs can be improved by 3 readings without loss of accuracy. Better reproducibility is achieved if the capsules are evaluated 7 days after irradiation using a nitrogen flow of 300 cc/min.

  14. Higgs self-coupling measurements at a 100 TeV hadron collider

    SciTech Connect (OSTI)

    Barr, Alan J.; Dolan, Matthew J.; Englert, Christoph; Ferreira de Lima, Enoque Danilo; Spannowsky, Michael

    2015-02-03

    An important physics goal of a possible next-generation high-energy hadron collider will be precision characterisation of the Higgs sector and electroweak symmetry breaking. A crucial part of understanding the nature of electroweak symmetry breaking is measuring the Higgs self-interactions. We study dihiggs production in proton-proton collisions at 100 TeV centre of mass energy in order to estimate the sensitivity such a machine would have to variations in the trilinear Higgs coupling around the Standard Model expectation. We focus on the bb¯γγ final state, including possible enhancements in sensitivity by exploiting dihiggs recoils against a hard jet. In conclusion, we find that it should be possible to measure the trilinear self-coupling with 40% accuracy given 3/ab and 12% with 30/ab of data.

  15. Characterization of TLD-100 micro-cubes for use in small field dosimetry

    SciTech Connect (OSTI)

    Peña-Jiménez, Salvador Gamboa-deBuen, Isabel; Lárraga-Gutiérrez, José Manuel E-mail: amanda.garcia.g@gmail.com; García-Garduño, Olivia Amanda E-mail: amanda.garcia.g@gmail.com

    2014-11-07

    At present there are no international regulations for the management of millimeter scale fields and there are no suggestions for a reference detector to perform the characterization and dose determination for unconventional radiation beams (small fields) so that the dosimetry of small fields remains an open research field worldwide because these fields are used in radiotherapy treatments. Sensitivity factors and reproducibility of TLD-100 micro-cubes (1×1×1 mm3) were determinate irradiating the dosimeters with a 6 MV beam in a linear accelerator dedicated to radiosurgery at the Instituto Nacional de Neurología y Neurocirugía (INNN). Thermoluminescent response as a function of dose was determined for doses in water between 0.5 and 3 Gy and two field sizes (2×2 cm2 and 10×10 cm2). It was found that the response is linear over the dose range studied and it does not depend on field size.

  16. Modal analysis and SHM investigation of CX-100 wind turbine blade

    SciTech Connect (OSTI)

    Deines, Krystal E; Marinone, Timothy; Schultz, Ryan A; Farinholt, Kevin M; Park, Gyuhae

    2011-01-24

    This paper presents the dynamic characterization of a CX100 blade using modal testing. Obtaining a thorough dynamic characterization of these turbine blades is important because they are complex structures, making them difficult to monitor for damage initiation and subsequent growth. This dynamic characterization was compared to a numerical model developed for validation. Structural Health Monitoring (SHM) techniques involving Lamb wave propagation, frequency response functions, and impedance based methods were also used to provide insight into blade dynamic response. SHM design parameters such as traveling distance of the wave, sensing region of the sensor and the power requirements were examined. Results obtained during modal and SHM testing will provide a baseline for future damage detection and mitigation techniques for wind turbine blades.

  17. 100 Area D4 Project Building Completion Report - July 2007 to December 2008

    SciTech Connect (OSTI)

    M. T. Stankovich

    2009-04-15

    This report documents the decontamination, decommissioning, and demolition of the 105-NB, 163-N, 183-N, 183-NA, 183-NB, 183-NC, 184-N, 184-NA, 184-NB, 184-NC, 184-ND, 184-NE, 184-NF, 1312-N, 1330-N, 1705-N, 1705-NA, 1706-N, 1712-N, 1714-N, 1714-NA, 1714-NB, 1802-N, MO-050, MO-055, MO-358, MO-390, MO-900, MO-911, and MO-950 facilities in the 100 Area of the Hanford Site. The D4 activities for these facilities include utility disconnection, planning, characterization, engineering, removal of hazardous and radiological contaminated materials, equipment removal, decommissioning, deactivation, decontamination, demolition of the structure, and removal of the remaining slabs.

  18. Towards a 100mA Superconducting RF Photoinjector for BERLinPro

    SciTech Connect (OSTI)

    Neumann, Axel; Anders, W.; Burrill, Andrew; Jankowiak, Andreas; Kamps, T.; Knobloch, Jens; Kugeler, Oliver; Lauinger, P.; Matveenko, A.N.; Schmeisser, M.; Volker, J.; Ciovati, Gianluigi; Kneisel, Peter; Nietubyc, R.; Schubert, S.G.; Smedley, John; Sekutowicz, Jacek; Volkov, V.; Will, I.; Zaplatin, Evgeny

    2013-09-01

    For BERLinPro, a 100 mA CW-driven SRF energy recovery linac demonstrator facility, HZB needs to develop a photo-injector superconducting cavity which delivers a at least 1mm*mr emittance beam at high average current. To address these challenges of producing a high peak brightness beam at high repetition rate, at first HZB tested a fully superconducting injector with a lead cathode*,followed now by the design of a SC cavity allowing operation up to 4 mA using CW-modified TTF-III couplers and inserting a normal conducting high quantum efficiency cathode using the HZDR-style insert scheme. This talk will present the latest results and an overview of the measurements with the lead cathode cavity and will describe the design and optimization process, the first production results of the current design and an outlook to the further development steps towards the full power version.

  19. Data validation report for the 100-HR-3 Operable Unit first quarter 1994 groundwater sampling data

    SciTech Connect (OSTI)

    Biggerstaff, R.L.

    1994-06-24

    Westinghouse-Hanford has requested that a minimum of 20% of the total number of Sample Delivery Groups be validated for the 100-HR-3 Operable Unit First Quarter 1994 Groundwater Sampling Investigation. Therefore, the data from the chemical analysis of twenty-four samples from this sampling event and their related quality assurance samples were reviewed and validated to verify that reported sample results were of sufficient quality to support decisions regarding remedial actions performed at this site. The samples were analyzed by Thermo-Analytic Laboratories (TMA) and Roy F. Weston Laboratories (WESTON) using US Environmental Protection Agency (EPA) CLP protocols. Sample analyses included: inorganics; and general chemical parameters. Forty-two samples were validated for radiochemical parameters by TMA and Teledyne.

  20. Growth and properties of crystalline barium oxide on the GaAs(100) substrate

    SciTech Connect (OSTI)

    Yasir, M.; Dahl, J.; Lng, J.; Tuominen, M.; Punkkinen, M. P. J.; Laukkanen, P. Kokko, K.; Kuzmin, M.; Ioffe Physical-Technical Institute, Russian Academy of Sciences, St. Petersburg 194021 ; Korpijrvi, V.-M.; Polojrvi, V.; Guina, M.

    2013-11-04

    Growing a crystalline oxide film on III-V semiconductor renders possible approaches to improve operation of electronics and optoelectronics heterostructures such as oxide/semiconductor junctions for transistors and window layers for solar cells. We demonstrate the growth of crystalline barium oxide (BaO) on GaAs(100) at low temperatures, even down to room temperature. Photoluminescence (PL) measurements reveal that the amount of interface defects is reduced for BaO/GaAs, compared to Al{sub 2}O{sub 3}/GaAs, suggesting that BaO is a useful buffer layer to passivate the surface of the III-V device material. PL and photoemission data show that the produced junction tolerates the post heating around 600?C.

  1. Energy production potential of a 100 m/sup 3/ biogas generator

    SciTech Connect (OSTI)

    Bartlett, H.D.; Persson, S.P.; Regan, R.W.

    1981-01-01

    The Penn State 100-cow capacity digester system - 100 m/sup 3/ (Upright Silo), heated (35/sup 0/C), continuous feed (1 to 2 times daily), gas agitation (continuously) - operated dependably on a continuous basis for periods as long as 9 months. Alternative systems for handling high solids-content input (up to 15% TS) were tested. Daily feedings of dairy manure slurries (8 to 15% TS) at rates of 345 to 1030 kg VS resulted in total biogas production rates of 70 to 200 m/sup 3//day, respectively. Increased loading rates, and related reduction in retention time to as low as 11 days, increased the energy recovery ratio (m/sup 3/ biogas/m/sup 3/ digester volume) to 2.02. Daily energy production was as high as 35,000 kJ/cow. Part of the biogas produced was used satisfactorily as fuel or a hot water boiler to heat incoming slurry and offset the digester heat losses. Tests of biogas as fuel for a water heater and for internal combustion engines showed combustion efficiencies comparable to other fuels on the basis of its energy content. Experience in operating the digester over a 4-year period showed that uncoated, galvanized, or enamel-painted steel are unsatisfactory for digester components that are in contact with both biogas and slurry. Carefully applied epoxy paints seemed to adequately protect continuously submerged steel components. Concrete, plastic, stainless steel, and treated wood appear to be suitable construction materials. Estimated costs versus returns for the Penn State digester system (75 to 76 prices) were $20,000 initial costs, and an annual return equal to the value of 900 GJ of energy.

  2. The redshift evolution of the mean temperature, pressure, and entropy profiles in 80 SPT-selected galaxy clusters

    SciTech Connect (OSTI)

    McDonald, M.; Bautz, M.; Benson, B. A.; Vikhlinin, A.; Bayliss, M.; Forman, W. R.; Aird, K. A.; Allen, S. W.; Bleem, L. E.; Carlstrom, J. E.; Chang, C. L.; Crawford, T. M.; Crites, A. T.; Bocquet, S.; Brodwin, M.; Cho, H. M.; Clocchiatti, A.; De Haan, T.; Dobbs, M. A.; Foley, R. J.; and others

    2014-10-10

    We present the results of an X-ray analysis of 80 galaxy clusters selected in the 2500 deg{sup 2} South Pole Telescope survey and observed with the Chandra X-ray Observatory. We divide the full sample into subsamples of ?20 clusters based on redshift and central density, performing a joint X-ray spectral fit to all clusters in a subsample simultaneously, assuming self-similarity of the temperature profile. This approach allows us to constrain the shape of the temperature profile over 0 < r < 1.5R {sub 500}, which would be impossible on a per-cluster basis, since the observations of individual clusters have, on average, 2000 X-ray counts. The results presented here represent the first constraints on the evolution of the average temperature profile from z = 0 to z = 1.2. We find that high-z (0.6 < z < 1.2) clusters are slightly (?30%) cooler both in the inner (r < 0.1R {sub 500}) and outer (r > R {sub 500}) regions than their low-z (0.3 < z < 0.6) counterparts. Combining the average temperature profile with measured gas density profiles from our earlier work, we infer the average pressure and entropy profiles for each subsample. Confirming earlier results from this data set, we find an absence of strong cool cores at high z, manifested in this analysis as a significantly lower observed pressure in the central 0.1R {sub 500} of the high-z cool-core subset of clusters compared to the low-z cool-core subset. Overall, our observed pressure profiles agree well with earlier lower-redshift measurements, suggesting minimal redshift evolution in the pressure profile outside of the core. We find no measurable redshift evolution in the entropy profile at r ? 0.7R {sub 500}this may reflect a long-standing balance between cooling and feedback over long timescales and large physical scales. We observe a slight flattening of the entropy profile at r ? R {sub 500} in our high-z subsample. This flattening is consistent with a temperature bias due to the enhanced (?3) rate at which group-mass (?2 keV) halos, which would go undetected at our survey depth, are accreting onto the cluster at z ? 1. This work demonstrates a powerful method for inferring spatially resolved cluster properties in the case where individual cluster signal-to-noise is low, but the number of observed clusters is high.

  3. A first principle study for the adsorption and absorption of carbon atom and the CO dissociation on Ir(100) surface

    SciTech Connect (OSTI)

    Erikat, I. A.; Hamad, B. A.

    2013-11-07

    We employ density functional theory to examine the adsorption and absorption of carbon atom as well as the dissociation of carbon monoxide on Ir(100) surface. We find that carbon atoms bind strongly with Ir(100) surface and prefer the high coordination hollow site for all coverages. In the case of 0.75?ML coverage of carbon, we obtain a bridging metal structure due to the balance between IrC and IrIr interactions. In the subsurface region, the carbon atom prefers the octahedral site of Ir(100) surface. We find large diffusion barrier for carbon atom into Ir(100) surface (2.70 eV) due to the strong bonding between carbon atom and Ir(100) surface, whereas we find a very small segregation barrier (0.22 eV) from subsurface to the surface. The minimum energy path and energy barrier for the dissociation of CO on Ir(100) surface are obtained by using climbing image nudge elastic band. The energy barrier of CO dissociation on Ir(100) surface is found to be 3.01 eV, which is appreciably larger than the association energy (1.61 eV) of this molecule.

  4. SU-E-I-09: Application of LiF:Mg,Cu (TLD-100H) Dosimeters for in Diagnostic Radiology

    SciTech Connect (OSTI)

    Sina, S; Zeinali, B; Karimipourfard, M; Lotfalizadeh, F; Sadeghi, M; Faghihi, R

    2014-06-01

    Purpose: Accurate dosimetery is very essential in diagnostic radiology. The goal of this study is to verify the application of LiF:Mg,Cu,P (TLD100H) in obtaining the Entrance skin dose (ESD) of patients undergoing diagnostic radiology. The results of dosimetry performed by TLD-100H, were compared with those obtained by TLD100, which is a common dosimeter in diagnostic radiology. Methods: In this study the ESD values were measured using two types of Thermoluminescence dosimeters (TLD-100, and TLD-100H) for 16 patients undergoing diagnostic radiology (lumbar spine imaging). The ESD values were also obtained by putting the two types of TLDs at the surface of Rando phantom for different imaging techniques and different views (AP, and lateral). The TLD chips were annealed with a standard procedure, and the ECC values for each TLD was obtained by exposing the chips to equal amount of radiation. Each time three TLD chips were covered by thin dark plastic covers, and were put at the surface of the phantom or the patient. The average reading of the three chips was used for obtaining the dose. Results: The results show a close agreement between the dose measuered by the two dosimeters.According to the results of this study, the TLD-100H dosimeters have higher sensitivities (i.e.signal(nc)/dose) than TLD-100.The ESD values varied between 2.71 mGy and 26.29 mGy with the average of 11.89 mGy for TLD-100, and between 2.55 mGy and 27.41 mGy with the average of 12.32 mGy for measurements. Conclusion: The TLD-100H dosimeters are suggested as effective dosimeters for dosimetry in low dose fields because of their higher sensitivities.

  5. MO-E-9A-01: Risk Based Quality Management: TG100 In Action

    SciTech Connect (OSTI)

    Huq, M; Palta, J; Dunscombe, P; Thomadsen, B

    2014-06-15

    One of the goals of quality management in radiation therapy is to gain high confidence that patients will receive the prescribed treatment correctly. To accomplish these goals professional societies such as the American Association of Physicists in Medicine (AAPM) has published many quality assurance (QA), quality control (QC), and quality management (QM) guidance documents. In general, the recommendations provided in these documents have emphasized on performing device-specific QA at the expense of process flow and protection of the patient against catastrophic errors. Analyses of radiation therapy incidents find that they are most often caused by flaws in the overall therapy process, from initial consult through final treatment, than by isolated hardware or computer failures detectable by traditional physics QA. This challenge is shared by many intrinsically hazardous industries. Risk assessment tools and analysis techniques have been developed to define, identify, and eliminate known and/or potential failures, problems, or errors, from a system, process and/or service before they reach the customer. These include, but are not limited to, process mapping, failure modes and effects analysis (FMEA), fault tree analysis (FTA), and establishment of a quality management program that best avoids the faults and risks that have been identified in the overall process. These tools can be easily adapted to radiation therapy practices because of their simplicity and effectiveness to provide efficient ways to enhance the safety and quality of treatment processes. Task group 100 (TG100) of AAPM has developed a risk-based quality management program that uses these tools. This session will be devoted to a discussion of these tools and how these tools can be used in a given radiotherapy clinic to develop a risk based QM program. Learning Objectives: Learn how to design a process map for a radiotherapy process. Learn how to perform a FMEA analysis for a given process. Learn what Fault tree analysis is all about. Learn how to design a quality management program based upon the information obtained from process mapping, FMEA and FTA.

  6. AMoRE: Collaboration for searches for the neutrinoless double-beta decay of the isotope of {sup 100}Mo with the aid of {sup 40}Ca{sup 100}MoO{sub 4} as a cryogenic scintillation detector

    SciTech Connect (OSTI)

    Khanbekov, N. D., E-mail: xanbekov@gmail.com [Institute of Theoretical and Experimental Physics (Russian Federation)

    2013-09-15

    The AMoRE (Advanced Mo based Rare process Experiment) Collaboration is planning to employ {sup 40}Ca{sup 100}MoO{sub 4} single crystals as a cryogenic Scintillation detector for studying the neutrinoless double-beta decay of the isotope {sup 100}Mo. A simultaneous readout of phonon and scintillation signals is performed in order to suppress the intrinsic background. The planned sensitivity of the experiment that would employ 100 kg of {sup 40}Ca{sup 100}MoO{sub 4} over five years of data accumulation would be T{sub 1/2}{sup 0{nu}} = 3 Multiplication-Sign 10{sup 26} yr, which corresponds to values of the effective Majorana neutrino mass in the range of Left-Pointing-Angle-Bracket m{sub {nu}} Right-Pointing-Angle-Bracket {approx} 0.02-0.06 eV.

  7. Edge electroluminescence of the effective silicon point-junction light-emitting diode in the temperature range 80-300 K

    SciTech Connect (OSTI)

    Emel'yanov, A. M. [Russian Academy of Sciences, Ioffe Physicotechnical Institute (Russian Federation)], E-mail: Emelyanov@mail.ioffe.ru

    2008-11-15

    The edge electroluminescence spectra of silicon point-junction light-emitting diodes with a p-n junction area of 0.008 mm{sup 2} are studied at temperatures ranging from 80 to 300 K. Unprecedentedly high stability of the position of the spectral peak is observed at temperatures in the range between 130 and 300 K. The spectral characteristics of the light emitting diodes are studied at 80 K at different current densities up to 25 kA/cm{sup 2}. In contrast to the earlier reported data obtained at 300 K, the data obtained at 80 K do not show any noticeable Augerrecombination-related decrease in the quantum efficiency. From an analysis of the electroluminescence spectra at 80 K in a wide range of currents, it follows that radiative annihilation of free excitons is not a governing mechanism of electroluminescence in the entire emitting region in the base of the point-junction light-emitting diode at all currents used in the experiment.

  8. Technology Development for High-Efficiency Solar Cells and Modules Using Thin (<80 um) Single-Crystal Silicon Wafers Produced by Epitaxy: June 11, 2011 - April 30, 2013

    SciTech Connect (OSTI)

    Ravi, T. S.

    2013-05-01

    Final technical progress report of Crystal Solar subcontract NEU-31-40054-01. The objective of this 18-month program was to demonstrate the viability of high-efficiency thin (less than 80 um) monocrystalline silicon (Si) solar cells and modules with a low-cost epitaxial growth process.

  9. U.S. Department of Energy Awards $100 Million in Fuel Cell R&D | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Awards $100 Million in Fuel Cell R&D U.S. Department of Energy Awards $100 Million in Fuel Cell R&D October 24, 2006 - 9:17am Addthis CHICAGO, IL -U.S. Department of Energy (DOE) Secretary Samuel W. Bodman today announced $100 million to fund 25 hydrogen research and development projects that can help change the way we power our nation. These projects support President Bush's Advanced Energy Initiative, which seeks to reduce our dependence on foreign sources of energy

  10. U.S. Department of Energy Projects Win 36 R&D 100 Awards for 2012 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 6 R&D 100 Awards for 2012 U.S. Department of Energy Projects Win 36 R&D 100 Awards for 2012 June 20, 2012 - 3:33pm Addthis WASHINGTON - U.S. Department of Energy researchers have won 36 of the 100 awards given out this year by R&D Magazine for the most outstanding technology developments with promising commercial potential. The coveted awards - now in their 50th year - are presented annually in recognition of exceptional new products, processes, materials or

  11. BETO Staff Voted into the "Top 100 People in the Bioeconomy" for 2013-2014

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Staff Voted into the "Top 100 People in the Bioeconomy" for 2013-2014 BETO Staff Voted into the "Top 100 People in the Bioeconomy" for 2013-2014 February 25, 2014 - 12:00am Addthis The Bioenergy Technologies Office (BETO) congratulates Jonathan Male (Director), Valerie Reed (Deputy Director), and Joyce Yang (Technology Manager) for being voted into the "Top 100 People in the Bioeconomy" for 2013-2014. In December 2013, the readers and

  12. DOE-Funded Research Projects Win 46 R&D 100 Awards for 2009 | U.S. DOE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Research Projects Win 46 R&D 100 Awards for 2009 DOE-Funded Research Projects Win 46 R&D 100 Awards for 2009 July 24, 2009 - 12:00am Addthis WASHINGTON, DC - U.S. Secretary of Energy Steven Chu announced today that Energy Department-funded researchers have won 46 of the 100 awards given out this year by R&D Magazine for the most outstanding technology developments with promising commercial potential. The coveted awards are presented annually in recognition of exceptional

  13. DOE-Funded Research Projects Win 41 R&D100 Awards for 2006 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy 1 R&D100 Awards for 2006 DOE-Funded Research Projects Win 41 R&D100 Awards for 2006 October 19, 2006 - 9:08am Addthis WASHINGTON, DC - Secretary of Energy Samuel W. Bodman today congratulated researchers at 12 DOE national laboratories who won 41 of the 100 awards given by R&D Magazine. The awards are presented annually in recognition of the most outstanding technology developments with commercial potential. R&D Magazine will make the awards tonight at its 44th annual

  14. Conceptual Design of a 100 MWe Modular Molten Salt Power Tower Plant

    SciTech Connect (OSTI)

    James E. Pacheco; Carter Moursund, Dale Rogers, David Wasyluk

    2011-09-20

    A conceptual design of a 100 MWe modular molten salt solar power tower plant has been developed which can provide capacity factors in the range of 35 to 75%. Compared to single tower plants, the modular design provides a higher degree of flexibility in achieving the desired customer's capacity factor and is obtained simply by adjusting the number of standard modules. Each module consists of a standard size heliostat field and receiver system, hence reengineering and associated unacceptable performance uncertainties due to scaling are eliminated. The modular approach with multiple towers also improves plant availability. Heliostat field components, receivers and towers are shop assembled allowing for high quality and minimal field assembly. A centralized thermal-storage system stores hot salt from the receivers, allowing nearly continuous power production, independent of solar energy collection, and improved parity with the grid. A molten salt steam generator converts the stored thermal energy into steam, which powers a steam turbine generator to produce electricity. This paper describes the conceptual design of the plant, the advantages of modularity, expected performance, pathways to cost reductions, and environmental impact.

  15. 100 Area soil washing: Bench scale tests on 116-F-4 pluto crib soil

    SciTech Connect (OSTI)

    Field, J.G.

    1994-06-10

    The Pacific Northwest Laboratory conducted a bench-scale treatability study on a pluto crib soil sample from 100 Area of the Hanford Site. The objective of this study was to evaluate the use of physical separation (wet sieving), treatment processes (attrition scrubbing, and autogenous surface grinding), and chemical extraction methods as a means of separating radioactively-contaminated soil fractions from uncontaminated soil fractions. The soil washing treatability study was conducted on a soil sample from the 116-F-4 Pluto Crib that had been dug up as part of an excavation treatability study. Trace element analyses of this soil showed no elevated concentrations above typically uncontaminated soil background levels. Data on the distribution of radionuclide in various size fractions indicated that the soil-washing tests should be focused on the gravel and sand fractions of the 116-F-4 soil. The radionuclide data also showed that {sup 137}Cs was the only contaminant in this soil that exceeded the test performance goal (TPG). Therefore, the effectiveness of subsequent soil-washing tests for 116-F-4 soil was evaluated on the basis of activity attenuation of {sup 137}Cs in the gravel- and sand-size fractions.

  16. Search for neutrinoless double-beta decay of Mo 100 with the NEMO-3 detector

    SciTech Connect (OSTI)

    John D. Baker; A. J. Caffrey

    2014-06-01

    We report the results of a search for the neutrinoless double- decay (0? ) of Mo 100 , using the NEMO-3 detector to reconstruct the full topology of the final state events. With an exposure of 34.7??kgy , no evidence for the 0? signal has been found, yielding a limit for the light Majorana neutrino mass mechanism of T 1/2 (0?)>1.110 24 years (90% C.L.) once both statistical and systematic uncertainties are taken into account. Depending on the nuclear matrix elements this corresponds to an upper limit on the Majorana effective neutrino mass of ?m ? ?<0.30.9??eV (90% C.L.). Constraints on other lepton number violating mechanisms of 0? decays are also given. Searching for high-energy double electron events in all suitable sources of the detector, no event in the energy region [3.210] MeV is observed for an exposure of 47??kgy .

  17. Lunar electric power systems utilizing the SP-100 reactor coupled to dynamic conversion systems. Final report

    SciTech Connect (OSTI)

    Harty, R.B.; Durand, R.E.

    1993-03-01

    An integration study was performed by Rocketdyne under contract to NASA-LeRC. The study was concerned with coupling an SP-0100 reactor to either a Brayton or Stirling power conversion system. The application was for a surface power system to supply power requirements to a lunar base. A power level of 550 kWe was selected based on the NASA Space Exploration Initiative 90-day study. Reliability studies were initially performed to determine optimum power conversion redundancy. This study resulted in selecting three operating engines and one stand-by unit. Integration design studies indicated that either the Brayton or Stirling power conversion systems could be integrated with the PS-100 reactor. The Stirling system had an integration advantage because of smaller piping size and fewer components. The Stirling engine, however, is more complex and heavier than the Brayton rotating unit, which tends to off-set the Stirling integration advantage. From a performance consideration, the Brayton had a 9 percent mass advantage, and the Stirling had a 50 percent radiator advantage.

  18. Performance of a High-Concentration Erbium-Doped Fiber Amplifier with 100 nm Amplification Bandwidth

    SciTech Connect (OSTI)

    Hajireza, P.; Shahabuddin, N. S.; Abbasi-Zargaleh, S.; Emami, S. D.; Abdul-Rashid, H. A.; Yusoff, Z.

    2010-07-07

    Increasing demand for higher bandwidth has driven the need for higher Wavelength Division Multiplexing (WDM) channels. One of the requirements to achieve this is a broadband amplifier. This paper reports the performance of a broadband, compact, high-concentration and silica-based erbium-doped fiber amplifier. The amplifier optimized to a 2.15 m long erbium-doped fiber with erbium ion concentration of 2000 ppm. The gain spectrum of the amplifier has a measured amplification bandwidth of 100 nm using a 980 nm laser diode with power of 150 mW. This silica-based EDFA shows lower noise figure, higher gain and wider bandwidth in shorter wavelengths compared to Bismuth-based EDFA with higher erbium ion concentration of 3250 ppm at equivalent EDF length. The silica-based EDF shows peak gain at 22 dB and amplification bandwidth between 1520 nm and 1620 nm. The lowest noise figure is 5 dB. The gain is further improved with the implementation of enhanced EDFA configurations.

  19. EVIDENCE FOR A MILKY WAY TIDAL STREAM REACHING BEYOND 100 kpc

    SciTech Connect (OSTI)

    Drake, A. J.; Djorgovski, S. G.; Graham, M. J.; Mahabal, A.; Donalek, C.; Williams, R.; Catelan, M.; Torrealba, G.; Prieto, J. L.; Larson, S.; Christensen, E.; Beshore, E.

    2013-03-10

    We present the analysis of 1207 RR Lyrae found in photometry taken by the Catalina Survey's Mount Lemmon telescope. By combining accurate distances for these stars with measurements for {approx}14,000 type-ab RR Lyrae from the Catalina Schmidt telescope, we reveal an extended association that reaches Galactocentric distances beyond 100 kpc and overlaps the Sagittarius stream system. This result confirms earlier evidence for the existence of an outer halo tidal stream resulting from a disrupted stellar system. By comparing the RR Lyrae source density with that expected based on halo models, we find the detection has {approx}8{sigma} significance. We investigate the distances, radial velocities, metallicities, and period-amplitude distribution of the RR Lyrae. We find that both radial velocities and distances are inconsistent with current models of the Sagittarius stream. We also find tentative evidence for a division in source metallicities for the most distant sources. Following prior analyses, we compare the locations and distances of the RR Lyrae with photometrically selected candidate horizontal branch stars and find supporting evidence that this structure spans at least 60 Degree-Sign of the sky. We investigate the prospects of an association between the stream and the unusual globular cluster NGC 2419.

  20. Uranium Oxide as a Highly Reflective Coating from 100-400 eV

    SciTech Connect (OSTI)

    Sandberg, Richard L.; Allred, David D.; Bissell, Luke J.; Johnson, Jed E.; Turley, R. Steven

    2004-05-12

    We present the measured reflectances (Beamline 6.3.2, ALS at LBNL) of naturally oxidized uranium and naturally oxidized nickel thin films from 100-460 eV (2.7 to 11.6 nm) at 5 and 15 degrees grazing incidence. These show that uranium, as UO2, can fulfill its promise as the highest known single surface reflector for this portion of the soft x-ray region, being nearly twice as reflective as nickel in the 124-250 eV (5-10 nm) region. This is due to its large index of refraction coupled with low absorption. Nickel is commonly used in soft x-ray applications in astronomy and synchrotrons. (Its reflectance at 10 deg. exceeds that of Au and Ir for most of this range.) We prepared uranium and nickel thin films via DC-magnetron sputtering of a depleted U target and resistive heating evaporation respectively. Ambient oxidation quickly brought the U sample to UO2 (total thickness about 30 nm). The nickel sample (50 nm) also acquired a thin native oxide coating (<2nm). Though the density of U in UO2 is only half of the metal, its reflectance is high and it is relatively stable against further changes.

  1. 100% MOX BWR experimental program design using multi-parameter representative

    SciTech Connect (OSTI)

    Blaise, P.; Fougeras, P.; Cathalau, S.

    2012-07-01

    A new multiparameter representative approach for the design of Advanced full MOX BWR core physics experimental programs is developed. The approach is based on sensitivity analysis of integral parameters to nuclear data, and correlations among different integral parameters. The representativeness method is here used to extract a quantitative relationship between a particular integral response of an experimental mock-up and the same response in a reference project to be designed. The study is applied to the design of the 100% MOX BASALA ABWR experimental program in the EOLE facility. The adopted scheme proposes an original approach to the problem, going from the initial 'microscopic' pin-cells integral parameters to the whole 'macroscopic' assembly integral parameters. This approach enables to collect complementary information necessary to optimize the initial design and to meet target accuracy on the integral parameters to be measured. The study has demonstrated the necessity of new fuel pins fabrication, fulfilling minimal costs requirements, to meet acceptable representativeness on local power distribution. (authors)

  2. Stable room-temperature ferromagnetic phase at the FeRh(100) surface

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Pressacco, Federico; Uhlir, Vojtech; Gatti, Matteo; Bendounan, Azzedine; Fullerton, Eric E.; Sirotti, Fausto

    2016-03-03

    Interfaces and low dimensionality are sources of strong modifications of electronic, structural, and magnetic properties of materials. FeRh alloys are an excellent example because of the first-order phase transition taking place at ~400 K from an antiferromagnetic phase at room temperature to a high temperature ferromagnetic one. It is accompanied by a resistance change and volume expansion of about 1%. We have investigated the electronic and magnetic properties of FeRh(100) epitaxially grown on MgO by combining spectroscopies characterized by different probing depths, namely X-ray magnetic circular dichroism and photoelectron spectroscopy. Furthermore, we find that the symmetry breaking induced at themore » Rh-terminated surface stabilizes a surface ferromagnetic layer involving five planes of Fe and Rh atoms in the nominally antiferromagnetic phase at room temperature. First-principles calculations provide a microscopic description of the structural relaxation and the electron spin-density distribution that support the experimental findings.« less

  3. CdSe Quantum-Dot-Sensitized Solar Cell with ~100% Internal Quantum Efficiency

    SciTech Connect (OSTI)

    Fuke, Nobuhiro; Hoch, Laura B.; Koposov, Alexey Y.; Manner, Virginia W.; Werder, Donald J.; Fukui, Atsushi; Koide, Naoki; Katayama, Hiroyuki; Sykora, Milan

    2010-10-20

    We have constructed and studied photoelectrochemical solar cells (PECs) consisting of a photoanode prepared by direct deposition of independently synthesized CdSe nanocrystal quantum dots (NQDs) onto a nanocrystalline TiO2 film (NQD/TiO2), aqueous Na2S or Li2S electrolyte, and a Pt counter electrode. We show that light harvesting efficiency (LHE) of the NQD/TiO2 photoanode is significantly enhanced when the NQD surface passivation is changed from tri-n-octylphosphine oxide (TOPO) to 4-butylamine (BA). In the PEC the use of NQDs with a shorter passivating ligand, BA, leads to a significant enhancement in both the electron injection efficiency at the NQD/TiO2 interface and charge collection efficiency at the NQD/electrolyte interface, with the latter attributed mostly to a more efficient diffusion of the electrolyte through the pores of the photoanode. We show that by utilizing BA-capped NQDs and aqueous Li2S as an electrolyte, it is possible to achieve ~100% internal quantum efficiency of photon-to-electron conversion, matching the performance of dye-sensitized solar cells.

  4. UP TO 100,000 RELIABLE STRONG GRAVITATIONAL LENSES IN FUTURE DARK ENERGY EXPERIMENTS

    SciTech Connect (OSTI)

    Serjeant, S.

    2014-09-20

    The Euclid space telescope will observe ?10{sup 5} strong galaxy-galaxy gravitational lens events in its wide field imaging survey over around half the sky, but identifying the gravitational lenses from their observed morphologies requires solving the difficult problem of reliably separating the lensed sources from contaminant populations, such as tidal tails, as well as presenting challenges for spectroscopic follow-up redshift campaigns. Here I present alternative selection techniques for strong gravitational lenses in both Euclid and the Square Kilometre Array, exploiting the strong magnification bias present in the steep end of the H? luminosity function and the H I mass function. Around 10{sup 3} strong lensing events are detectable with this method in the Euclid wide survey. While only ?1% of the total haul of Euclid lenses, this sample has ?100% reliability, known source redshifts, high signal-to-noise, and a magnification-based selection independent of assumptions of lens morphology. With the proposed Square Kilometre Array dark energy survey, the numbers of reliable strong gravitational lenses with source redshifts can reach 10{sup 5}.

  5. 2013 R&D 100 Award: New tech could mean more power for fiber lasers

    ScienceCinema (OSTI)

    Dawson, Jay

    2014-07-21

    An LLNL team of six physicists has developed a new technology that is a stepping stone to enable some of the limitations on high-power fiber lasers to be overcome. Their technology, dubbed "Efficient Mode-Converters for High-Power Fiber Amplifiers," allows the power of fiber lasers to be increased while maintaining high beam quality. Currently, fiber lasers are used in machining, on factory floors and in a number of defense applications and can produce tens of kilowatts of power.The conventional fiber laser design features a circular core and has fundamental limitations that make it impractical to allow higher laser power unless the core area is increased. LLNL researchers have pioneered a design to increase the laser's core area along the axis of the ribbon fiber. Their design makes it difficult to use a conventional laser beam, so the LLNL team converted the beam into a profile that propagates into the ribbon fiber and is converted back once it is amplified. The use of this LLNL technology will permit the construction of higher power lasers for lower costs and increase the power of fiber lasers from tens of kilowatts of power to about 100 kilowatts and potentially even higher.

  6. Epitaxial growth of highly conductive RuO{sub 2} thin films on (100) Si

    SciTech Connect (OSTI)

    Jia, Q.X.; Song, S.G.; Wu, X.D.; Cho, J.H.; Foltyn, S.R.; Findikoglu, A.T.; Smith, J.L.

    1996-02-01

    Conductive RuO{sub 2} thin films have been heteroepitaxially grown by pulsed laser deposition on Si substrates with yttria-stabilized zirconia (YSZ) buffer layers. The RuO{sub 2} thin films deposited under optimized processing conditions are {ital a}-axis oriented normal to the Si substrate surface with a high degree of in-plane alignment with the major axes of the (100) Si substrate. Cross-sectional transmission electron microscopy analysis on the RuO{sub 2}/YSZ/Si multilayer shows an atomically sharp interface between the RuO{sub 2} and the YSZ. Electrical measurements show that the crystalline RuO{sub 2} thin films are metallic over a temperature range from 4.2 to 300 K and are highly conductive with a room-temperature resistivity of 37{plus_minus}2 {mu}{Omega}cm. The residual resistance ratio ({ital R}{sub 300K}/{ital R}{sub 4.2K}) above 5 for our RuO{sub 2} thin films is the highest ever reported for such films on Si substrates. {copyright} {ital 1996 American Institute of Physics.}

  7. Structure of n-alkyltrichlorosilane mono layers on Si(100)/SiO2

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    H. -G. Steinruck; Ocko, B.; Will, J.; Magerl, A.

    2015-10-05

    The structure of n-alkyltrichlorosilane self-assembled monolayers (SAMs) of alkyl chain lengths n = 12, 14, 18, and 22 formed on the amorphous native oxide of silicon (100) has been investigated via angstrom-resolution surface X-ray scattering techniques, with particular focus on the proliferation of lateral order along the molecules’ long axis. Grazing incidence diffraction shows that the monolayer is composed of hexagonally packed crystalline-like domains for n = 14, 18, and 22 with a lateral size of about 60 Å. However, Bragg rod analysis shows that ~12 of the CH2 units are not included in the crystalline-like domains. We assign this,more » and the limited lateral crystallites’ size, to strain induced by the size mismatch between the optimal chain–chain and headgroup–headgroup spacings. Lastly, analysis of X-ray reflectivity profiles for n = 12, 14, and 22 shows that the density profile used to successfully model n = 18 provides an excellent fit where the analysis-derived parameters provide complementary structural information to the grazing incidence results.« less

  8. 2013 R&D 100 Award: Movie-mode electron microscope captures nanoscale

    ScienceCinema (OSTI)

    Lagrange, Thomas; Reed, Bryan

    2014-07-21

    A new instrument developed by LLNL scientists and engineers, the Movie Mode Dynamic Transmission Electron Microscope (MM-DTEM), captures billionth-of-a-meter-scale images with frame rates more than 100,000 times faster than those of conventional techniques. The work was done in collaboration with a Pleasanton-based company, Integrated Dynamic Electron Solutions (IDES) Inc. Using this revolutionary imaging technique, a range of fundamental and technologically important material and biological processes can be captured in action, in complete billionth-of-a-meter detail, for the first time. The primary application of MM-DTEM is the direct observation of fast processes, including microstructural changes, phase transformations and chemical reactions, that shape real-world performance of nanostructured materials and potentially biological entities. The instrument could prove especially valuable in the direct observation of macromolecular interactions, such as protein-protein binding and host-pathogen interactions. While an earlier version of the technology, Single Shot-DTEM, could capture a single snapshot of a rapid process, MM-DTEM captures a multiframe movie that reveals complex sequences of events in detail. It is the only existing technology that can capture multiple electron microscopy images in the span of a single microsecond.

  9. RHIC polarized proton-proton operation at 100 GeV in Run 15

    SciTech Connect (OSTI)

    Schoefer, V.; Aschenauer, E. C.; Atoian, G.; Blaskiewicz, M.; Brown, K. A.; Bruno, D.; Connolly, R.; D Ottavio, T.; Drees, K. A.; Dutheil, Y.; Fischer, W.; Gardner, C.; Gu, X.; Hayes, T.; Huang, H.; Laster, J.; Liu, C.; Luo, Y.; Makdisi, Y.; Marr, G.; Marusic, A.; Meot, F.; Mernick, K.; Michnoff, R.; Marusic, A.; Minty, M.; Montag, C.; Morris, J.; Narayan, G.; Nemesure, S.; Pile, P.; Poblaguev, A.; Ranjbar, V.; Robert-Demolaize, G.; Roser, T.; Schmidke, W. B.; Severino, F.; Shrey, T.; Smith, K.; Steski, D.; Tepikian, S.; Trbojevic, D.; Tsoupas, N.; Tuozzolo, J.; Wang, G.; White, S.; Yip, K.; Zaltsman, A.; Zelenski, A.; Zeno, K.; Zhang, S. Y.

    2015-05-03

    The first part of RHIC Run 15 consisted of ten weeks of polarized proton on proton collisions at a beam energy of 100 GeV at two interaction points. In this paper we discuss several of the upgrades to the collider complex that allowed for improved performance. The largest effort consisted in commissioning of the electron lenses, one in each ring, which are designed to compensate one of the two beam-beam interactions experienced by the proton bunches. The e-lenses raise the per bunch intensity at which luminosity becomes beam-beam limited. A new lattice was designed to create the phase advances necessary for a beam-beam compensation with the e-lens, which also has an improved off-momentum dynamic aperture relative to previous runs. In order to take advantage of the new, higher intensity limit without suffering intensity driven emittance deterioration, other features were commissioned including a continuous transverse bunch-by-bunch damper in RHIC and a double harmonic RF cature scheme in the Booster. Other high intensity protections include improvements to the abort system and the installation of masks to intercept beam lost due to abort kicker pre-fires.

  10. Structure of n-alkyltrichlorosilane mono layers on Si(100)/SiO2

    SciTech Connect (OSTI)

    H. -G. Steinruck; Ocko, B.; Will, J.; Magerl, A.

    2015-10-05

    The structure of n-alkyltrichlorosilane self-assembled monolayers (SAMs) of alkyl chain lengths n = 12, 14, 18, and 22 formed on the amorphous native oxide of silicon (100) has been investigated via angstrom-resolution surface X-ray scattering techniques, with particular focus on the proliferation of lateral order along the molecules’ long axis. Grazing incidence diffraction shows that the monolayer is composed of hexagonally packed crystalline-like domains for n = 14, 18, and 22 with a lateral size of about 60 Å. However, Bragg rod analysis shows that ~12 of the CH2 units are not included in the crystalline-like domains. We assign this, and the limited lateral crystallites’ size, to strain induced by the size mismatch between the optimal chain–chain and headgroup–headgroup spacings. Lastly, analysis of X-ray reflectivity profiles for n = 12, 14, and 22 shows that the density profile used to successfully model n = 18 provides an excellent fit where the analysis-derived parameters provide complementary structural information to the grazing incidence results.

  11. California: Heliotrope Technologies Wins R&D 100 Award for Universal Smart Window Coating that Saves Energy and Increases Comfort

    Broader source: Energy.gov [DOE]

    EERE-funded Heliotrope Technologies, with support from EEREs Lawrence Berkeley National Laboratory (LBNL), received a 2013 R&D 100 Award for their Universal Smart Window (USW) Coating.

  12. Three NETL-Developed Technologies Recognized by R&D Magazine as Among 100 Most Significant in Past Year

    Broader source: Energy.gov [DOE]

    Three technologies developed by the Department of Energy’s National Energy Technology Laboratory have been recognized by R&D Magazine as among the 100 most technologically significant products to enter the marketplace in the past year.

  13. Webinar: Excellence in Bioenergy Innovation—A Presentation of 2015 R&D 100 Award Winning Projects

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) will present a live webinar titled “Excellence in Bioenergy Innovation—A Presentation of 2015 R&D 100 Award Winning Projects” on Thursday, January 21, 2016...

  14. DOE-Funded Research Projects Win 35 R&D 100 Awards for 2003 | U.S. DOE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Office of Science (SC) 35 R&D 100 Awards for 2003 About About Home Organization Budget Field Offices Federal Advisory Committees History Scientific and Technical Information Honors & Awards Presidential Early Career Awards for Scientists and Engineers (PECASE) The Enrico Fermi Award The Ernest Orlando Lawrence Award DOE Nobel Laureates Federal Laboratory Consortium Excellence in Technology Transfer Awards R&D 100 Awards Jobs Brochures, Logos, & Information Resources Contact

  15. Seedless Polyol Synthesis and CO Oxidation Activity of Monodisperse (111) and (100)-Oriented Rhodium Nanocrystals in Sub-10 nm Sizes

    SciTech Connect (OSTI)

    Zhang, Yawen; Grass, Michael E.; Huang, Wenyu; Somorjai, Gabor A.

    2010-03-15

    Monodisperse sub-10 nm (6.5 nm) sized Rh nanocrystals with (111) and (100) surface structures were synthesized by a seedless polyol reduction in ethylene glycol, with poly(vinylpyrrolidone) as a capping ligand. When using [Rh(Ac){sub 2}]{sub 2} as the metal precursor, (111)-oriented Rh nanopolyhedra containing 76% (111)-twined hexagons (in 2D projection) were obtained; whereas, when employing RhCl{sub 3} as the metal precursor in the presence of alkylammonium bromide, such as tetramethylammonium bromide and trimethyl(tetradecyl)ammonium bromide, (100)-oriented Rh nanocubes were obtained with 85% selectivity. The {l_brace}100{r_brace} faces of the Rh nanocrystals are stabilized by chemically adsorbed Br{sup -} ions from alkylammonium bromides, which led to (100)-oriented nanocubes. Monolayer films of the (111)-oriented Rh nanopolyhedra and (100)-oriented Rh nanocubes were deposited on silicon wafers in a Langmuir-Blodgett trough to make model 2D nanoarray catalysts. These nanocatalysts were active for CO oxidation by O{sub 2}, and the turnover frequency was independent of nanoparticle shape, consistent with that previously observed for Rh(111) and Rh(100) single crystals.

  16. TREATABILITY TEST REPORT FOR THE REMOVAL OF CHROMIUM FROM GROUNDWATER AT 100-D AREA USING ELECTROCOAGULATION

    SciTech Connect (OSTI)

    PETERSEN SW

    2009-09-24

    The U.S. Department of Energy (DOE) has committed to accelerate cleanup of contaminated groundwater along the Columbia River. The current treatment approach was driven by a series of Interim Action Records of Decision (IAROD) issued in the mid-1990s. Part of the approach for acceleration involves increasing the rate of groundwater extraction for the chromium plume north of the 100-D Reactor and injecting the treated water in strategic locations to hydraulically direct contaminated groundwater toward the extraction wells. The current treatment system uses ion exchange for Cr(VI) removal, with off-site regeneration of the ion exchange resins. Higher flow rates will increase the cost and frequency of ion exchange resin regeneration; therefore, alternative technologies are being considered for treatment at high flow rates. One of these technologies, electrocoagulation (EC), was evaluated through a pilot-scale treatability test. The primary purpose of the treatability study was to determine the effectiveness of Cr(VI) removal and the robustness/implementability of an EC system. Secondary purposes of the study were to gather information about derivative wastes and to obtain data applicable to scaling the process from the treatability scale to full-scale. The treatability study work plan identified a performance objective and four operational objectives. The performance objective for the treatability study was to determine the efficiency (effectiveness) of hexavalent chromium removal from the groundwater, with a desired concentration of {le} 20 micrograms per liter ({micro}g/L) Cr(VI) in the effluent prior to re-injection. Influent and effluent total chromium and hexavalent chromium data were collected using a field test kit for multiple samples per week, and from off-site laboratory analysis of samples collected approximately monthly. These data met all data quality requirements. Two of three effluent chromium samples analyzed in the off-site (that is, fixed) laboratory met the performance objective during the continuous operational testing. Effluent hexavalent chromium analyzed by the field laboratory met the performance goal in over 90 percent of the samples. All effluent hexavalent chromium samples during the batch testing with high influent hexavalent chromium concentrations ({approx}2000 {micro}g/L) met the performance objective. Although the EC system was able to meet the performance goal, it must be noted that it was not uncommon for the system to be operated in recycle mode to achieve the performance goal. The EC unit was sometimes, but not always, capable of a single pass treatment efficiency high enough to meet the performance goal, and recycling water for multiple treatment passes was effective. An operational objective was to determine the volume and composition of the waste streams to enable proper waste designation. The toxicity characteristic leaching procedure (TCLP) concentrations, pH, and free liquids were determined for solid material from the EC electrodes (mechanically removed scale), the filter press, and the tank bottoms for the effluent and waste collector tanks. These data met all data quality requirements. All solid-phase secondary waste streams were found to be below the TCLP limits for the toxicity characteristic, and a pH value within the limits for the corrosivity characteristic. Out of three samples, two (one of scale from the EC unit and one from filter press solids) failed the free liquid (paint filter) test, which is one of the acceptability criteria for Hanford's Environmental Restoration Disposal Facility (ERDF). The solid-phase waste generation rate was about 0.65-gallon of solid waste per 100 gallons of water treated. It is concluded that the solid-phase secondary waste generated from this technology under the conditions at the test site will meet the toxicity and corrosivity criteria for disposal. It is also concluded that with engineering and/or operational improvements, a solid-phase secondary waste could be produced that would meet the free liquid disposal requirements. The second oper

  17. NREL Researchers Demonstrate External Quantum Efficiency Surpassing 100% in a Quantum Dot Solar Cell (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-12-01

    A new device that produces and collects multiple electrons per photon could yield inexpensive, high-efficiency photovoltaics. A new device developed through research at the National Renewable Energy Laboratory (NREL) reduces conventional losses in photovoltaic (PV) solar cells, potentially increasing the power conversion efficiency-but not the cost-of the solar cells. Solar cells convert optical energy from the sun into usable electricity; however, almost 50% of the incident energy is lost as heat with present-day technologies. High-efficiency, multi-junction cells reduce this heat loss, but their cost is significantly higher. NREL's new device uses excess energy in solar photons to create extra charges rather than heat. This was achieved using 5-nanometer-diameter quantum dots of lead selenide (PbSe) tightly packed into a film. The researchers chemically treated the film, and then fabricated a device that yielded an external quantum efficiency (number of electrons produced per incident photon) exceeding 100%, a value beyond that of all current solar cells for any incident photon. Quantum dots are known to efficiently generate multiple excitons (a bound electron-hole pair) per absorbed high-energy photon, and this device definitively demonstrates the collection of multiple electrons per photon in a PV cell. The internal quantum efficiency corrects for photons that are not absorbed in the photoactive layer and shows that the PbSe film generates 30% to 40% more electrons in the high-energy spectral region than is possible with a conventional solar cell. While the unoptimized overall power conversion efficiency is still low (less than 5%), the results have important implications for PV because such high quantum efficiency can lead to more electrical current produced than possible using present technologies. Furthermore, this fabrication is also amenable to inexpensive, high-throughput roll-to-roll manufacturing.

  18. 70 Gy Versus 80 Gy in Localized Prostate Cancer: 5-Year Results of GETUG 06 Randomized Trial;Prostate cancer; Dose escalation; Conformal radiotherapy; Randomized trial

    SciTech Connect (OSTI)

    Beckendorf, Veronique; Guerif, Stephane; Le Prise, Elisabeth; Cosset, Jean-Marc; Bougnoux, Agnes; Chauvet, Bruno; Salem, Naji; Chapet, Olivier; Bourdain, Sylvain; Bachaud, Jean-Marc; Maingon, Philippe; Hannoun-Levi, Jean-Michel; Malissard, Luc; Simon, Jean-Marc; Pommier, Pascal; Hay, Men; Dubray, Bernard; Lagrange, Jean-Leon; Luporsi, Elisabeth; Bey, Pierre

    2011-07-15

    Purpose: To perform a randomized trial comparing 70 and 80 Gy radiotherapy for prostate cancer. Patients and Methods: A total of 306 patients with localized prostate cancer were randomized. No androgen deprivation was allowed. The primary endpoint was biochemical relapse according to the modified 1997-American Society for Therapeutic Radiology and Oncology and Phoenix definitions. Toxicity was graded using the Radiation Therapy Oncology Group 1991 criteria and the late effects on normal tissues-subjective, objective, management, analytic scales (LENT-SOMA) scales. The patients' quality of life was scored using the European Organization for Research and Treatment of Cancer Quality of Life Questionnaire 30-item cancer-specific and 25-item prostate-specific modules. Results: The median follow-up was 61 months. According to the 1997-American Society for Therapeutic Radiology and Oncology definition, the 5-year biochemical relapse rate was 39% and 28% in the 70- and 80-Gy arms, respectively (p = .036). Using the Phoenix definition, the 5-year biochemical relapse rate was 32% and 23.5%, respectively (p = .09). The subgroup analysis showed a better biochemical outcome for the higher dose group with an initial prostate-specific antigen level >15 ng/mL. At the last follow-up date, 26 patients had died, 10 of their disease and none of toxicity, with no differences between the two arms. According to the Radiation Therapy Oncology Group scale, the Grade 2 or greater rectal toxicity rate was 14% and 19.5% for the 70- and 80-Gy arms (p = .22), respectively. The Grade 2 or greater urinary toxicity was 10% at 70 Gy and 17.5% at 80 Gy (p = .046). Similar results were observed using the LENT-SOMA scale. Bladder toxicity was more frequent at 80 Gy than at 70 Gy (p = .039). The quality-of-life questionnaire results before and 5 years after treatment were available for 103 patients with no differences found between the 70- and 80-Gy arms. Conclusion: High-dose radiotherapy provided a better 5-year biochemical outcome with slightly greater toxicity.

  19. Oxygen enriched combustion system performance study. Phase 2: 100 percent oxygen enriched combustion in regenerative glass melters, Final report

    SciTech Connect (OSTI)

    Tuson, G.B.; Kobayashi, H.; Campbell, M.J.

    1994-08-01

    The field test project described in this report was conducted to evaluate the energy and environmental performance of 100% oxygen enriched combustion (100% OEC) in regenerative glass melters. Additional objectives were to determine other impacts of 100% OEC on melter operation and glass quality, and to verify on a commercial scale that an on-site Pressure Swing Adsorption oxygen plant can reliably supply oxygen for glass melting with low electrical power consumption. The tests constituted Phase 2 of a cooperative project between the United States Department of Energy, and Praxair, Inc. Phase 1 of the project involved market and technical feasibility assessments of oxygen enriched combustion for a range of high temperature industrial heating applications. An assessment of oxygen supply options for these applications was also performed during Phase 1, which included performance evaluation of a pilot scale 1 ton per day PSA oxygen plant. Two regenerative container glass melters were converted to 100% OEC operation and served as host sites for Phase 2. A 75 ton per day end-fired melter at Carr-Lowrey Glass Company in Baltimore, Maryland, was temporarily converted to 100% OEC in mid- 1990. A 350 tpd cross-fired melter at Gallo Glass Company in Modesto, California was rebuilt for permanent commercial operation with 100% OEC in mid-1991. Initially, both of these melters were supplied with oxygen from liquid storage. Subsequently, in late 1992, a Pressure Swing Adsorption oxygen plant was installed at Gallo to supply oxygen for 100% OEC glass melting. The particular PSA plant design used at Gallo achieves maximum efficiency by cycling the adsorbent beds between pressurized and evacuated states, and is therefore referred to as a Vacuum/Pressure Swing Adsorption (VPSA) plant.

  20. In Situ Validation of a Correction for Time-Lag and Bias Errors in Vaisala RS80-H Radiosonde Humidity Measurements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ Validation of a Correction for Time-Lag and Bias Errors in Vaisala RS80-H Radiosonde Humidity Measurements L. M. Miloshevich National Center for Atmospheric Research Boulder, Colorado H. Vömel and S. J. Oltmans National Oceanic and Atmospheric Administration Boulder, Colorado A. Paukkunen Vaisala Oy Helsinki, Finland Introduction Radiosonde relative humidity (RH) measurements are fundamentally important to Atmospheric Radiation Measurement (ARM) Program goals because they are used in a