Powered by Deep Web Technologies
Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Category:2-M Probe Survey | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin: EnergyBostonFacilityCascade Sierra Solutions CSSCassCastroCatamount2-M Probe

2

Millimeter-wave active probe  

DOE Patents [OSTI]

A millimeter-wave active probe for use in injecting signals with frequencies above 50GHz to millimeter-wave and ultrafast devices and integrated circuits including a substrate upon which a frequency multiplier consisting of filter sections and impedance matching sections are fabricated in uniplanar transmission line format. A coaxial input and uniplanar 50 ohm transmission line couple an approximately 20 GHz input signal to a low pass filter which rolls off at approximately 25 GHz. An input impedance matching section couples the energy from the low pass filter to a pair of matched, antiparallel beam lead diodes. These diodes generate odd-numberd harmonics which are coupled out of the diodes by an output impedance matching network and bandpass filter which suppresses the fundamental and third harmonics and selects the fifth harmonic for presentation at an output.

Majidi-Ahy, Gholamreza (Sunnyvale, CA); Bloom, David M. (Portola Valley, CA)

1991-01-01T23:59:59.000Z

3

Regenerable activated bauxite adsorbent alkali monitor probe  

DOE Patents [OSTI]

A regenerable activated bauxite adsorber alkali monitor probe for field applications to provide reliable measurement of alkali-vapor concentration in combustion gas with special emphasis on pressurized fluidized-bed combustion (PFBC) off-gas. More particularly, the invention relates to the development of a easily regenerable bauxite adsorbent for use in a method to accurately determine the alkali-vapor content of PFBC exhaust gases. 6 figs.

Lee, S.H.D.

1992-12-22T23:59:59.000Z

4

Active Probing Approach for Fault Localization in Computer Networks*  

E-Print Network [OSTI]

to develop tools for performing fault localization. We discuss various design issues involved and propose architecture for building such a tool. We describe an algorithm for probe set selection for problem detection a wide range of activities involving network design and operation [7, 9, 17, 18]. Network monitoring can

Sethi, Adarshpal

5

2-M Probe Survey | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey Flatshydro Homepowering9 Usefulness useful

6

2-M Probe Survey | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place:ReferenceEditWisconsin:YBR14 CCRInformationOpen(Redirected

7

Probes  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FORPoints of Contact Privacy Points ofPrivateProbes

8

Pyrethroid Activity-Based Probes for Profiling Cytochrome P450 Activities Associated with Insecticide Interactions  

SciTech Connect (OSTI)

Pyrethroid insecticides are used to control a diverse spectrum of diseases spread by arthropods. We have developed a suite of pyrethroid mimetic activity based probes (PyABPs) to selectively label and identify P450s associated with pyrethroid metabolism. The probes were screened against pyrethroid metabolizing and non-metabolizing mosquito P450s, as well as rodent microsomes to measure labeling specificity, plus CPR and b5 knockout mouse livers to validate P450 activation and establish the role for b5 in probe activation. Using a deltamethrin mimetic PyABP we were able to profile active enzymes in rat liver microsomes and identify pyrethroid metabolizing enzymes in the target tissue. The most reactive enzyme was a P450, CYP2C11, which is known to metabolize deltamethrin. Furthermore, several other pyrethroid metabolizers were identified (CYPs 2C6, 3A4, 2C13 and 2D1) along with related detoxification enzymes, notably UDP-g’s 2B1 - 5, suggesting a network of associated pyrethroid metabolizing enzymes, or ‘pyrethrome’. Considering the central role that P450s play in metabolizing insecticides, we anticipate that PyABPs will aid the identification and profiling of P450s associated with insecticide pharmacology in a wide range of species, improving understanding of P450-insecticide interactions and aiding the development of new tools for disease control.

Ismail, Hanafy M.; O'Neill, Paul M.; Hong, David; Finn, Robert; Henderson, Colin; Wright, Aaron T.; Cravatt, Benjamin; Hemingway, Janet; Paine, Mark J.

2014-01-18T23:59:59.000Z

9

Advances in studying bioinorganic reaction mechanisms: isotopic probes of activated oxygen  

E-Print Network [OSTI]

Advances in studying bioinorganic reaction mechanisms: isotopic probes of activated oxygen intermediates in metalloenzymes Justine P Roth Metalloenzymes catalyze reactions of molecular oxygen and its reduced forms through the controlled formation of metal- bound, activated oxygen intermediates

Roth, Justine P.

10

Nanotube sensors Probing Macrophage Activity with Carbon-Nanotube  

E-Print Network [OSTI]

devices is placed in a home- built flow-cell on top of a Peltier element to maintain the temperature available for single-cell studies with a versatile high-sensitivity probe of nanometer dimension. SWNTs have of singleproteins.Incomparisonwithcurrent electrical probesthat have lateral dimensions comparable to single cells

Dekker, Cees

11

active site probe: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

25 Next Page Last Page Topic Index 61 Summary of Activities at the ST LOUIS NORTH COUNTY SITE Engineering Websites Summary: Coldwater Creek, make up the North County Site. On...

12

DOI: 10.1002/cbic.201400013 Phosphoramidates as Novel Activity-Based Probes for  

E-Print Network [OSTI]

DOI: 10.1002/cbic.201400013 Phosphoramidates as Novel Activity-Based Probes for Serine Proteases as a novel type of ABP for serine proteases. These molecules can be made in a straightforward manner phosphoramidates as a novel type of serine protease ABP. The main benefit lies in their ability to be exclu- sively

Bogyo, Matthew

13

Probe molecule studies: Active species in alcohol synthesis. Final report, July 1993--July 1994  

SciTech Connect (OSTI)

The objectives of this project are to investigate the role(s) of cobalt and copper in constructing the active sites for the formation of higher alcohols from CO/H{sub 2} over the Co-Cu based catalysts by using different reduction treatments and applying selected characterization tools such as TPR, TPD, XRD and XPS as well as to generate mechanistic information on the reaction pathway(s) and key intermediate(s) of higher alcohol synthesis from CO/H{sub 2} over Co-Cu/ZnO catalysts by the approach of in-situ addition of a probe molecule (nitromethane).

Blackmond, D.G.; Wender, I.; Oukaci, R.; Wang, Jian

1994-07-01T23:59:59.000Z

14

Positron emission tomography probes for imaging immune activation and selected cancers  

DOE Patents [OSTI]

Compounds for use as PET probes and methods for synthesizing and using these, comprising [.sup.18F]D-FAC and other cytosine and adenosine analogs.

Radu, Caius G. (Los Angeles, CA); Witte, Owen N. (Los Angeles, CA); Nair-Gill, Evan David (Los Angeles, CA); Satyamurthy, Nagichettiar (Los Angeles, CA); Shu, Chengyi J. (Los Angeles, CA); Czernin, Johannes (Los Angeles, CA)

2012-01-24T23:59:59.000Z

15

Independent Oversight Review, Hanford Site CH2M Hill Plateau...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

CH2M Hill Plateau Remediation Company - November 2012 Independent Oversight Review, Hanford Site CH2M Hill Plateau Remediation Company - November 2012 November 2012 Review of the...

16

Deutsche Telekom and Cinterion Wireless Modules become M2M partners Dec 04, 2009  

E-Print Network [OSTI]

Deutsche Telekom and Cinterion Wireless Modules become M2M partners Dec 04, 2009 · Agreement signed governing cooperation, joint market development, activities and projects Deutsche Telekom AG and Cinterion in Deutsche Telekom's international M2M- strategy", says Rainer Deutschmann, Senior Vice President Mobile

Deutschmann, Rainer

17

Specificity of aza-peptide electrophile activity-based probes of caspases  

E-Print Network [OSTI]

on well-characterized mechanism-based inhibitors. We describe here the evaluation of a novel series to as a `warhead' since it leads to permanent inactivation of the target by covalent modification of a primary the acyloxymethyl ketone reactive warhead that label active caspases.5,6 The caspases are clan CD proteases whose

Bogyo, Matthew

18

Spectrophotometric probe  

DOE Patents [OSTI]

A support structure is described bearing at least one probe for making spectrophotometric measurements of a fluid using a source of light and a spectrophotometer. The probe includes a housing with two optical fibers and a planoconvex lens. A sleeve bearing a mirror surrounds the housing. The lens is separated from the mirror by a fixed distance, defining an interior space for receiving a volume of the fluid sample. A plurality of throughholes extending through the sleeve communicate between the sample volume and the exterior of the probe, all but one hole bearing a screen. A protective jacket surrounds the probe. A hollow conduit bearing a tube is formed in the wall of the probe for venting any air in the interior space when fluid enters. The probe is held at an acute angle so the optic fibers carrying the light to and from the probe are not bent severely on emergence from the probe. 3 figs.

Prather, W.S.; O'Rourke, P.E.

1994-08-02T23:59:59.000Z

19

2-M Probe At Alum Area (Kratt, Et Al., 2010) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpenWende NewSowitec doWinvest Home Jweers's"Ghost"0-ftAlum

20

2-M Probe At Columbus Salt Marsh Area (Kratt, Et Al., 2010) | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpenWende NewSowitec doWinvest Home

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

2-M Probe At Gabbs Alkali Flat Area (Kratt, Et Al., 2008) | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpenWende NewSowitec doWinvest HomeInformation Gabbs Alkali Flat

22

2-M Probe At Rhodes Marsh Area (Shevenell, Et Al., 2008) | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpenWende NewSowitec doWinvest HomeInformation Gabbs Alkali

23

2-M Probe At Silver Peak Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpenWende NewSowitec doWinvest HomeInformation Gabbs AlkaliDOE

24

2-M Probe At Teels Marsh Area (Kratt, Et Al., 2008) | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey Flatshydro Homepowering america Home1021Information

25

2-M Probe At Teels Marsh Area (Shevenell, Et Al., 2008) | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey Flatshydro Homepowering america

26

2-M Probe At The Needles Area (Kratt, Et Al., 2010) | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey Flatshydro Homepowering americaInformation Kratt,

27

2-M Probe At Tungsten Mountain Area (Kratt, Et Al., 2008) | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey Flatshydro Homepowering americaInformation

28

2-M Probe At Winnemucca Dry Lake Area (Kratt, Et Al., 2010) | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey Flatshydro Homepowering

29

2-M Probe Survey At Coso Geothermal Area (1979) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey Flatshydro Homepowering9 Usefulness useful DOE-funding

30

2-M Probe Survey At Coso Geothermal Area (2007) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey Flatshydro Homepowering9 Usefulness useful DOE-funding

31

2-M Probe Survey At Salt Wells Area (Coolbaugh, Et Al., 2006) | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey Flatshydro Homepowering9 Usefulness useful

32

2-M Probe At Black Warrior Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place:ReferenceEditWisconsin:YBR14 CCR §ResourcesMileDevelopmentBlack

33

2-M Probe At Dead Horse Wells Area (Kratt, Et Al., 2010) | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place:ReferenceEditWisconsin:YBR14 CCR

34

2-M Probe At Desert Peak Area (Sladek, Et Al., 2007) | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place:ReferenceEditWisconsin:YBR14 CCRInformation Sladek, Et Al.,

35

2-M Probe At Flint Geothermal Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place:ReferenceEditWisconsin:YBR14 CCRInformation Sladek, Et

36

2-M Probe At Fort Bliss Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place:ReferenceEditWisconsin:YBR14 CCRInformation Sladek, EtFort

37

2-M Probe At Mcgee Mountain Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place:ReferenceEditWisconsin:YBR14 CCRInformation Sladek,

38

2-M Probe At Pilgrim Hot Springs Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place:ReferenceEditWisconsin:YBR14 CCRInformation Sladek,DOE GTP)

39

2-M Probe At Tungsten Mountain Area (Shevenell, Et Al., 2008) | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place:ReferenceEditWisconsin:YBR14 CCRInformation Sladek,DOE

40

2-M Probe Survey At Chena Geothermal Area (Wescott & Turner, 1982) | Open  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place:ReferenceEditWisconsin:YBR14 CCRInformation Sladek,DOEEnergy

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

2-M Probe Survey At Coso Geothermal Area (1977) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place:ReferenceEditWisconsin:YBR14 CCRInformation

42

2-M Probe Survey At Dixie Valley Geothermal Area (Skord, Et Al., 2001) |  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place:ReferenceEditWisconsin:YBR14 CCRInformationOpen Energy

43

2-M Probe Survey At Salt Wells Area (Skord, Et Al., 2011) | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 South Place:ReferenceEditWisconsin:YBR14 CCRInformationOpen

44

2-M Probe At Astor Pass Area (Kratt, Et Al., 2010) | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey Flatshydro Homepowering america Home1021 Jump

45

2-M Probe At Gabbs Valley Area (DOE GTP) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey Flatshydro Homepowering america Home1021 JumpArea (DOE

46

2-M Probe At Hawthorne Area (Kratt, Et Al., 2010) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey Flatshydro Homepowering america Home1021 JumpArea

47

2-M Probe At Rhodes Marsh Area (Kratt, Et Al., 2008) | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey Flatshydro Homepowering america Home1021

48

M2M for Smart Cities Gerd Ascheid  

E-Print Network [OSTI]

M2M for Smart Cities Gerd Ascheid #12;Agenda What is a "Smart City"? Cellular System based M2M Cities and Communities Source: http://eu-smartcities.eu 3 #12;What Elements Make a City ,,Smart" ? Smart groups 4 #12;Important Topics for Building a Smart City Infrastructure Intelligent Networks Services

49

Nanoscale Probing of Voltage Activated Oxygen Reduction/Evolution Reactions in Nanopatterned (LaxSr1-x)CoO3- Cathodes  

SciTech Connect (OSTI)

Bias-dependent mechanisms of reversible and irreversible electrochemical processes on a (La0.5Sr0.5)2CoO4 modified (LaxSr1-x)CoO3- surface are studied using dynamic electrochemical strain microscopy (D-ESM). The reversible oxygen reduction/evolution process is activated at voltages as low as 3 4 V and the degree of transformation increases linearly with applied bias. The irreversible processes associated with static surface deformation become apparent above 10 12 V. Post-mortem focused-ion milling combined with atomic resolution scanning transmission electron microscopy and electron energy loss spectroscopy is used to establish the mechanisms of irreversible transformations and attribute it to amorphization of the top layer of material. These studies both establish the framework for probing irreversible electrochemical processes in solids and illustrate rich spectrum of electrochemical transformations underpinning electrocatalytic activity in cobaltites.

Leonard, Donovan N [ORNL; Kumar, Amit [ORNL; Jesse, Stephen [ORNL; Biegalski, Michael D [ORNL; Christen, Hans M [ORNL; Mutoro, Eva [Massachusetts Institute of Technology (MIT); Crumlin, Ethan [Massachusetts Institute of Technology (MIT); Shao-Horn, Yang [Massachusetts Institute of Technology (MIT); Kalinin, Sergei V [ORNL; Borisevich, Albina Y [ORNL

2013-01-01T23:59:59.000Z

50

Intersublevel optical transitions in InAs nanocrystals probed by photoinduced absorption spectroscopy: The role of thermal activation  

E-Print Network [OSTI]

of well-defined envelope-state symmetry relations while the second attributes the thermal activation spectroscopy: The role of thermal activation D. Krapf,1 S.-H. Kan,2 U. Banin,2 O. Millo,3 and A. Sa'ar1,3, * 1 have found that the valence intersublevel transitions are thermally activated and cannot be observed

Krapf, Diego

51

The E2/M1 ratio in {Delta} photoproduction  

SciTech Connect (OSTI)

New high-precision measurements of p({rvec {gamma}}, {pi}) and p({rvec {gamma}}, {gamma}) cross sections and beam asymmetries have been combined with other polarization ratios in a simultaneous analysis of both reactions. The E2/M1 mixing ratio for the n {r_arrow} {Delta} transition extracted from this analysis is EMR = {minus}3.0% {+-} 0.3 (stat+sys) {+-} 0.2 (model).

Hoblit, S. [Brookhaven National Lab., Upton, NY (United States). Physics Dept.]|[Univ. of Virginia, Charlottesville, VA (United States). Dept. of Physics; Blanpied, G. [Univ. of South Carolina, Columbia, SC (United States). Dept. of Physics; Blecher, M. [Virginia Polytechnic Inst. and State Univ., Blacksburg, VA (United States). Physics Dept.] [and others; LEGS Collaboration

1997-10-01T23:59:59.000Z

52

A Selective Activity-Based Probe for the Papain Family Cysteine Protease Dipeptidyl Peptidase I/Cathepsin C  

E-Print Network [OSTI]

an activity-dependent chemical reaction.9 The choice of a reactive functional group or "warhead" coupled. In this communication, we report a novel ABP that can be used to selectively label DPPI in complex proteomes as well. These structural requirements pose a number of restrictions on the type of warhead that can be applied

Bogyo, Matthew

53

CH2M HILL Plateau Remediation Company | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTie Ltd:June 2015 <Ones | DepartmentCEEComponents |Chemistry |CH2M

54

CH2M HILL Plateau Remediation Company have  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New Substation Sites Proposed Route BTRIC CNMS CSMB CFTF Working with CFTF HFIR CH2M

55

The E2/M1 ratio in {Delta} photoproduction  

SciTech Connect (OSTI)

The properties of the transition from the nucleon to the {Delta}(1232) serve as a benchmark for models of nucleon structure. To first order, N {r_arrow} {Delta} photo-excitation is dominated by a simple M1 quark spin-flip transition. At higher order, small L = 2 components in the N and {Delta} wavefunctions allow this excitation to proceed via an electric quadrupole transition. Since Nucleon models differ greatly on the mechanisms used to generate these L = 2 components,, the ratio of E2/M1 transitions (EMR) provides a sensitive test for structure models. Here, new high-precision measurements of p({rvec {gamma}}, {pi}) and p({rvec {gamma}}, {gamma}) cross sections and beam asymmetries have been combined with other polarization ratios in a simultaneous analysis of both reactions. Compton scattering has provided two important new constraints on the photo-pion amplitude. The E2/M1 mixing ratio for the N {r_arrow} {Delta} transition extracted from this analysis is EMR = {minus}3.0% {+-} 0.3 (stat+sys) {+-} 0.2 (model).

Sandorfi, A.M. [Brookhaven National Lab., Upton, NY (United States). Physics Dept.; Blanpied, G. [Univ. of South Carolina, Columbia, SC (United States). Dept. of Physics; Blecher, M. [Virginia Polytechnic Inst. and State Univ., Blacksburg, VA (United States). Physics Dept.] [and others; LEGS Collaboration

1997-08-01T23:59:59.000Z

56

ENZYME ACTIVITY PROBE AND GEOCHEMICAL ASSESSMENT FOR POTENTIAL AEROBIC COMETABOLISM OF TRICHLOROETHENE IN GROUNDWATER OF THE NORTHWEST PLUME, PADUCAH GASEOUS DIFFUSION PLANT, KENTUCKY  

SciTech Connect (OSTI)

The overarching objective of the Paducah Gaseous Diffusion Plant (PGDP) enzyme activity probe (EAP) effort is to determine if aerobic cometabolism is contributing to the attenuation of trichloroethene (TCE) and other chlorinated solvents in the contaminated groundwater beneath PGDP. The site-specific objective for the EAP assessment is to identify if key metabolic pathways are present and expressed in the microbial community--namely the pathways that are responsible for degradation of methane and aromatic (e.g. toluene, benzene, phenol) substrates. The enzymes produced to degrade methane and aromatic compounds also break down TCE through a process known as cometabolism. EAPs directly measure if methane and/or aromatic enzyme production pathways are operating and, for the aromatic pathways, provide an estimate of the number of active organisms in the sampled groundwater. This study in the groundwater plumes at PGDP is a major part of a larger scientific effort being conducted by Interstate Technology and Regulatory Council (ITRC), U.S. Department of Energy (DOE) Office of Environmental Management (EM), Savannah River National Laboratory (SRNL), and North Wind Inc. in which EAPs are being applied to contaminated groundwater from diverse hydrogeologic and plume settings throughout the U.S. to help standardize their application as well as their interpretation. While EAP data provide key information to support the site specific objective for PGDP, several additional lines of evidence are being evaluated to increase confidence in the determination of the occurrence of biodegradation and the rate and sustainability of aerobic cometabolism. These complementary efforts include: (1) Examination of plume flowpaths and comparison of TCE behavior to 'conservative' tracers in the plume (e.g., {sup 99}Tc); (2) Evaluation of geochemical conditions throughout the plume; and (3) Evaluation of stable isotopes in the contaminants and their daughter products throughout the plume. If the multiple lines of evidence support the occurrence of cometabolism and the potential for the process to contribute to temporal and spatial attenuation of TCE in PGDP groundwater, then a follow-up enzyme probe microcosm study to better estimate biological degradation rate(s) is warranted.

Looney, B; M. Hope Lee, M; S. K. Hampson, S

2008-06-27T23:59:59.000Z

57

Final Project Report - Coupled Biogeochemical Process Evaluation for Conceptualizing Trichloriethylene Co-Metabolism: Co-Metabolic Enzyme Activity Probes and Modeling Co-Metabolism and Attenuation  

SciTech Connect (OSTI)

Trichloroethene (TCE) (also known as trichloroethylene) is a common contaminant in groundwater. TCE is regulated in drinking water at a concentration of 5 µg/L, and a small mass of TCE has the potential to contaminant large volumes of water. The physical and chemical characteristics of TCE allow it to migrate quickly in most subsurface environments, and thus large plumes of contaminated groundwater can form from a single release. The migration and persistence of TCE in groundwater can be limited by biodegradation. TCE can be biodegraded via different processes under either anaerobic or aerobic conditions. Anaerobic biodegradation is widely recognized, but aerobic degradation is less well recognized. Under aerobic conditions, TCE can be oxidized to non hazardous conditions via cometabolic pathways. This study applied enzyme activity probes to demonstrate that cometabolic degradation of TCE occurs in aerobic groundwater at several locations, used laboratory microcosm studies to determine aerobic degradation rates, and extrapolated lab-measured rates to in situ rates based on concentrations of microorganisms with active enzymes involved in cometabolic TCE degradation. Microcosms were constructed using basalt chips that were inoculated with microorganisms to groundwater at the Idaho National Laboratory Test Area North TCE plume by filling a set of Flow-Through In Situ Reactors (FTISRs) with chips and placing the FTISRs into the open interval of a well for several months. A parametric study was performed to evaluate predicted degradation rates and concentration trends using a competitive inhibition kinetic model, which accounts for competition for enzyme active sites by both a growth substrate and a cometabolic substrate. The competitive inhibition kinetic expression was programmed for use in the RT3D reactive transport package. Simulations of TCE plume evolution using both competitive inhibition kinetics and first order decay were performed.

Starr, Robert C; Orr, Brennon R; Lee, M Hope; Delwiche, Mark

2010-02-26T23:59:59.000Z

58

Use of the NIST Cybersecurity Framework & DOE C2M2 | Department...  

Broader source: Energy.gov (indexed) [DOE]

Use of the NIST Cybersecurity Framework & DOE C2M2 Use of the NIST Cybersecurity Framework & DOE C2M2 Recognizing that the national and economic security of the United States...

59

Hydrodynamic ultrasonic probe  

DOE Patents [OSTI]

An improved probe for in-service ultrasonic inspection of long lengths of a workpiece, such as small diameter tubing from the interior. The improved probe utilizes a conventional transducer or transducers configured to inspect the tubing for flaws and/or wall thickness variations. The probe utilizes a hydraulic technique, in place of the conventional mechanical guides or bushings, which allows the probe to move rectilinearly or rotationally while preventing cocking thereof in the tube and provides damping vibration of the probe. The probe thus has lower friction and higher inspection speed than presently known probes.

Day, Robert A. (Livermore, CA); Conti, Armond E. (San Jose, CA)

1980-01-01T23:59:59.000Z

60

Sustainability Data and Analytics in Cloud-Based M2M Systems  

E-Print Network [OSTI]

consumption and GHG cal- culation) and maintaining M2M environments [e.g., monitoring failure of chillers

Dustdar, Schahram

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Surface enhanced Raman gene probe and methods thereof  

DOE Patents [OSTI]

The subject invention disclosed herein is a new gene probe biosensor and methods based on surface enhanced Raman scattering (SERS) label detection. The SER gene probe biosensor comprises a support means, a SER gene probe having at least one oligonucleotide strand labeled with at least one SERS label, and a SERS active substrate disposed on the support means and having at least one of the SER gene probes adsorbed thereon. Biotargets such as bacterial and viral DNA, RNA and PNA are detected using a SER gene probe via hybridization to oligonucleotide strands complementary to the SER gene probe. The support means supporting the SERS active substrate includes a fiberoptic probe, an array of fiberoptic probes for performance of multiple assays and a waveguide microsensor array with charge-coupled devices or photodiode arrays. 18 figs.

Vo-Dinh, T.

1998-09-29T23:59:59.000Z

62

Surface enhanced Raman gene probe and methods thereof  

DOE Patents [OSTI]

The subject invention disclosed is a new gene probe biosensor and methods based on surface enhanced Raman scattering (SERS) label detection. The SER gene probe biosensor comprises a support means, a SER gene probe having at least one oligonucleotide strand labeled with at least one SERS label, and a SERS active substrate disposed on the support means and having at least one of the SER gene probes adsorbed. Biotargets such as bacterial and viral DNA, RNA and PNA are detected using a SER gene probe via hybridization to oligonucleotide strands complementary to the SER gene probe. The support means supporting the SERS active substrate includes a fiberoptic probe, an array of fiberoptic probes for performance of multiple assays and a waveguide microsensor array with charge-coupled devices or photodiode arrays. 18 figs.

Vo-Dinh, T.

1998-07-21T23:59:59.000Z

63

Voluntary Protection Program Onsite Review, CH2M HILL Plateau Remediation Co., Inc., Hanford – Jan 2014  

Broader source: Energy.gov [DOE]

Evaluation to determine whether CH2M HILL Plateau Remediation Co., Inc., Hanford is performing at a level deserving DOE-VPP Star recognition.

64

EERE Announces up to $2M for Clean Energy Supply Chain and Manufacturi...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Clean Energy Supply Chain and Manufacturing Competitiveness Analysis for Hydrogen and Fuel Cell Technologies EERE Announces up to 2M for Clean Energy Supply Chain and...

65

Voluntary Protection Program Onsite Review, CH2M WG LLC, Idaho Cleanup Project – March 2014  

Broader source: Energy.gov [DOE]

Evaluation to determine whether CH2M WG LLC, Idaho Cleanup Project is performing at a level deserving DOE-VPP Star recognition.

66

Ultrafast scanning probe microscopy  

DOE Patents [OSTI]

An ultrafast scanning probe microscopy method for achieving subpicosecond-temporal resolution and submicron-spatial resolution of an observation sample. In one embodiment of the present claimed invention, a single short optical pulse is generated and is split into first and second pulses. One of the pulses is delayed using variable time delay means. The first pulse is then directed at an observation sample located proximate to the probe of a scanning probe microscope. The scanning probe microscope produces probe-sample signals indicative of the response of the probe to characteristics of the sample. The second pulse is used to modulate the probe of the scanning probe microscope. The time delay between the first and second pulses is then varied. The probe-sample response signal is recorded at each of the various time delays created between the first and second pulses. The probe-sample response signal is then plotted as a function of time delay to produce a cross-correlation of the probe sample response. In so doing, the present invention provides simultaneous subpicosecond-temporal resolution and submicron-spatial resolution of the sample.

Weiss, Shimon (El Cerrito, CA); Chemla, Daniel S. (Kensington, CA); Ogletree, D. Frank (El Cerrito, CA); Botkin, David (San Francisco, CA)

1995-01-01T23:59:59.000Z

67

Ultrafast scanning probe microscopy  

DOE Patents [OSTI]

An ultrafast scanning probe microscopy method is described for achieving subpicosecond-temporal resolution and submicron-spatial resolution of an observation sample. In one embodiment of the present claimed invention, a single short optical pulse is generated and is split into first and second pulses. One of the pulses is delayed using variable time delay means. The first pulse is then directed at an observation sample located proximate to the probe of a scanning probe microscope. The scanning probe microscope produces probe-sample signals indicative of the response of the probe to characteristics of the sample. The second pulse is used to modulate the probe of the scanning probe microscope. The time delay between the first and second pulses is then varied. The probe-sample response signal is recorded at each of the various time delays created between the first and second pulses. The probe-sample response signal is then plotted as a function of time delay to produce a cross-correlation of the probe sample response. In so doing, the present invention provides simultaneous subpicosecond-temporal resolution and submicron-spatial resolution of the sample. 6 Figs.

Weiss, S.; Chemla, D.S.; Ogletree, D.F.; Botkin, D.

1995-05-16T23:59:59.000Z

68

Surface enhanced Raman gene probe and methods thereof  

DOE Patents [OSTI]

The subject invention disclosed is a new gene probe biosensor and methods based on surface enhanced Raman scattering (SERS) label detection. The SER gene probe biosensor comprises a support means, a SER gene probe having at least one oligonucleotide strand labeled with at least one SERS label, and a SERS active substrate disposed on the support means and having at least one of the SER gene probes adsorbed thereon. Biotargets such as bacterial and viral DNA, RNA and PNA are detected using a SER gene probe via hybridization to oligonucleotide strands complementary to the SER gene probe. The support means includes a fiberoptic probe, an array of fiberoptic probes for performance of multiple assays and a waveguide microsensor array with charge-coupled devices or photodiode arrays. 18 figs.

Vo-Dinh, T.

1998-02-24T23:59:59.000Z

69

High temperature probe  

DOE Patents [OSTI]

A high temperature probe for sampling, for example, smokestack fumes, and is able to withstand temperatures of 3000.degree. F. The probe is constructed so as to prevent leakage via the seal by placing the seal inside the water jacket whereby the seal is not exposed to high temperature, which destroys the seal. The sample inlet of the probe is also provided with cooling fins about the area of the seal to provide additional cooling to prevent the seal from being destroyed. Also, a heated jacket is provided for maintaining the temperature of the gas being tested as it passes through the probe. The probe includes pressure sensing means for determining the flow velocity of an efficient being sampled. In addition, thermocouples are located in various places on the probe to monitor the temperature of the gas passing there through.

Swan, Raymond A. (Fremont, CA)

1994-01-01T23:59:59.000Z

70

Type II Transformation -Callus Osmotic Treatment (pre-/post-bombardment) Media N6 1-100-25 +0.2M Mannitol +0.2M sorbitol  

E-Print Network [OSTI]

Type II Transformation - Callus Osmotic Treatment (pre-/post-bombardment) Media N6 1-100-25 +0.2M) Autoclave 25minutes. Cool at 47-50C 45 minutes. Pour into 100x25mm Petri Dishes in hood. 1L=30 plates. Dry

Raizada, Manish N.

71

EP271 Syllabus 2011-2012 T2 M.P. Bradley  

E-Print Network [OSTI]

EP271 Syllabus 2011-2012 T2 M.P. Bradley EP271: Heat, Kinetic Theory & Thermodynamics 2011 Room 312) CourseWebsite:http://physics.usask.ca/%7Ebradley/EP271_main.html Textbook

Saskatchewan, University of

72

Boom And Bust With The Latest 2M Temperature Surveys- Dead Horse...  

Open Energy Info (EERE)

of the use of two-meter temperature (2m) surveys to quickly and inexpensively reveal blind geothermal systems were documented at Dead Horse Wells, the Hawthorne Army Depot, and...

73

HERA-B GAS HUT: Mixing stations OTR: 4,2 x 1,2 m  

E-Print Network [OSTI]

HERA-B GAS HUT: Mixing stations OTR: 4,2 x 1,2 m MUON tube + pad: 3,0 x 1,2 m 80 MUON pixel: 1,2x1 gas bottles Detector.xls(Gas hut) Page 1 J. Spengler 20.08.1997 #12;The compressors will be installed purifiers 2 compressors 1 compressors 1 spare 1 gas separator 1 7 spare 0,5 5 Muon tube MFC's + steering

74

Genetic Control of the Trigger for the G2/M Checkpoint  

SciTech Connect (OSTI)

The work undertaken in this project addressed two seminal areas of low dose radiation biology that are poorly understood and controversial. These areas are the challenge to the linear-no-threshold (LNT) paradigm at low doses of radiation and, the fundamental elements of radiation bystander effect biology Genetic contributions to low dose checkpoint engagement: The LNT paradigm is an extrapolation of known, measured cancer induction endpoints. Importantly, data for lower doses is often not available. Debatably, radiation protection standards have been introduced which are prudently contingent on the adherence of cancer risk to the established trend seen at higher doses. Intriguing findings from other labs have hinted at separate DNA damage response programs that engage at low or high levels of radiation. Individual radiation sensitivity commensurate with hemizygosity for a radiation sensitivity gene has been estimated at 1-2% in the U.S.. Careful interrogation of the DNA damage response at low doses of radiation became important and served as the basis for this grant. Several genes were tested in combinations to determine if combined haploinsufficiency for multiple radiosensitizing genes could render a cell more sensitive to lower levels of acute radiation exposure. We measured a classical radiation response endpoint, cell cycle arrest prior to mitosis. Mouse embryo fibroblasts were used and provided a uniform, rapidly dividing and genetically manipulable population of study. Our system did not report checkpoint engagement at acute doses of gamma rays below 100 mGy. The system did report checkpoint engagement reproducibly at 500 mGy establishing a threshold for activation between 100 and 500 mGy. Engagement of the checkpoint was ablated in cells nullizygous for ATM but was otherwise unperturbed in cells combinatorially haploinsufficient for ATM and Rad9, ATM and PTEN or PTEN and Rad9. Taken together, these experiments tell us that, in a sensitive fibroblast culture system, the engagement of the G2/M checkpoint only occurs at doses where most of the cells are bound for mitotic catastrophe. Further, compound haploinsufficiency of various radiosensitizing genes does not impact the threshold of activation. The experiments confirm a threshold of activation for the G2/M checkpoint, hinting at two separate radiation response programs acting below and above this threshold. Small RNA transfer in bystander effect biology: Small regulatory RNA molecules have now risen in prominence and utility. Specific examples are small interfering RNAs (siRNA) which are employed in cell level expression ablation projects and micro-RNAs (miRNA) which are a pool of short transcription products which serve to modulate the expression of other transcripts emerging from the genome in a meta-regulatory fine tuning of gene expression. The existing tenets of bystander effect radiation biology involve the communication of inflammatory mediators or direct intercellular communication of reactive oxygen/nitrogen species in cell-to-cell communicative organelles called gap junctions. By ablating gap junctions, reducing the ROS/inflammatory cytokine expression one can attenuate bystander effect signaling in cell culture systems. We hypothesized that miRNAs are a competent intercellular communication molecule and therefore a possible component of the bystander response. This view is supported by the observation that miRNA are secreted from cells in exosomes found in the circulation. This circulating pool reports disease type and severity in humans. We proposed use of microbeam irradiation technology at our facilities and enhancement of this capability with a new sorting technology which would allow us to sort irradiated and non-irradiated cells with absolute fidelity. Pursuing direct quantitative transfer assessment, we succeeded in designing and constructing a new add-on sorting appliance which harmonized with our existing instruments. The sorter allowed us to gently sort single fluorescently labeled cells. The plans for this appliance were published and are now

Hall, Eric J. [Columbia University] [Columbia University; Smilenov, Lubomir B. [Columbia University] [Columbia University; Young, Erik F. [Columbia University] [Columbia University

2013-10-01T23:59:59.000Z

75

SUBMILLIMETER H{sub 2}O MASER IN CIRCINUS GALAXY-A NEW PROBE FOR THE CIRCUMNUCLEAR REGION OF ACTIVE GALACTIC NUCLEI  

SciTech Connect (OSTI)

We present the first detection of extragalactic submillimeter H{sub 2}O maser in the 321 GHz transition toward the center of Circinus galaxy, the nearby Type 2 Seyfert using the Atacama Large Millimeter/Submillimeter Array. We find that Doppler features of the detected 321 GHz H{sub 2}O maser straddle the systemic velocity of the galaxy as seen in the spectrum of the known 22 GHz H{sub 2}O maser in the galaxy. By comparing the velocities of the maser features in both transitions, it can be deduced that the 321 GHz maser occurs in a region similar to that of the 22 GHz maser, where the sub-parsec-scale distribution of the 22 GHz maser was revealed by earlier very long baseline interferometry observations. The detected maser features remain unresolved at the synthesized beam of {approx}0.''66 ({approx}15 pc) and coincide with the 321 GHz continuum peak within small uncertainties. We also present a tentative detection of the highest velocity feature (redshifts up to {approx}635 km s{sup -1}) in the galaxy. If this high-velocity feature arises from a Keplerian rotating disk well established in this galaxy, it is located at a radius of {approx}0.018 pc ({approx}1.2 Multiplication-Sign 10{sup 5} Schwarzschild radii), which might probe molecular material closest to the central engine.

Hagiwara, Yoshiaki; Miyoshi, Makoto [National Astronomical Observatory of Japan, 2-21-1 Osawa, Mitaka, Tokyo 181-8588 (Japan); Doi, Akihiro [Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency, 3-1-1 Yoshinodai, Chuou-ku, Sagamihara, Kanagawa 252-5210 (Japan); Horiuchi, Shinji, E-mail: yoshiaki.hagiwara@nao.ac.jp [CSIRO Astronomy and Space Science, Canberra Deep Space Communications Complex, P.O. Box 1035, Tuggeranong, ACT 2901 (Australia)

2013-05-10T23:59:59.000Z

76

Carbon nanotube based electromechanical probes  

E-Print Network [OSTI]

Electromechanical probing applications continuously require smaller pitches, faster manufacturing and lower electrical resistance. Conventional techniques, such as MEMS based cantilever probes have their shortcomings in ...

Yaglioglu, Onnik, 1976-

2007-01-01T23:59:59.000Z

77

Foldable polymers as probes  

DOE Patents [OSTI]

Disclosed herein are novel probes, which can be used to detect and identify target molecules of interest in a sample. The disclosed probes can be used to monitor conformational changes induced by molecular recognition events in addition to providing signaling the presence and/or identity of a target molecule. Methods, including solid phase synthesis techniques, for making probe molecules that exhibit changes in their optical properties upon target molecule binding are described in the disclosure. Also disclosed herein are novel chromophore moieties, which have tailored fluorescent emission spectra.

Li, Alexander D. Q. (Pullman, WA); Wang, Wei (Pullman, WA)

2009-07-07T23:59:59.000Z

78

Chemical sensing flow probe  

SciTech Connect (OSTI)

A new chemical probe determines the properties of an analyte using the light absorption of the products of a reagent/analyte reaction. The probe places a small reaction volume in contact with a large analyte volume. Analyte diffuses into the reaction volume. Reagent is selectively supplied to the reaction volume. The light absorption of the reaction in the reaction volume indicates properties of the original analyte. The probe is suitable for repeated use in remote or hostile environments. It does not require physical sampling of the analyte or result in significant regent contamination of the analyte reservoir. 7 figs.

Laguna, G.R.; Peter, F.J.; Butler, M.A.

1999-02-16T23:59:59.000Z

79

Probing metal solidification nondestructively  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home DesignPresentationsSRS Responds toPrivacyProbingProbingProbing

80

Chemical sensing flow probe  

DOE Patents [OSTI]

A new chemical probe determines the properties of an analyte using the light absorption of the products of a reagent/analyte reaction. The probe places a small reaction volume in contact with a large analyte volume. Analyte diffuses into the reaction volume. Reagent is selectively supplied to the reaction volume. The light absorption of the reaction in the reaction volume indicates properties of the original analyte. The probe is suitable for repeated use in remote or hostile environments. It does not require physical sampling of the analyte or result in significant regent contamination of the analyte reservoir.

Laguna, George R. (Albuquerque, NM); Peter, Frank J. (Albuquerque, NM); Butler, Michael A. (Albuquerque, NM)

1999-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Scintillation probe with photomultiplier tube saturation indicator  

DOE Patents [OSTI]

A photomultiplier tube saturation indicator is formed by supplying a supplemental light source, typically an light emitting diode (LED), adjacent to the photomultiplier tube. A switch allows the light source to be activated. The light is forwarded to the photomultiplier tube by an optical fiber. If the probe is properly light tight, then a meter attached to the indicator will register the light from the LED. If the probe is no longer light tight, and the saturation indicator is saturated, no signal will be registered when the LED is activated.

Ruch, Jeffrey F. (Bethel Park, PA); Urban, David J. (Glassport, PA)

1996-01-01T23:59:59.000Z

82

Surface-enhanced Raman scattering (SERS) dosimeter and probe  

DOE Patents [OSTI]

A dosimeter and probe for measuring exposure to chemical and biological compounds is disclosed. The dosimeter or probe includes a collector which may be analyzed by surface-enhanced Raman spectroscopy. The collector comprises a surface-enhanced Raman scattering-active material having a coating applied thereto to improve the adsorption properties of the collector. The collector may also be used in automated sequential devises, in probe array devices.

Vo-Dinh, Tuan (Knoxville, TN)

1995-01-01T23:59:59.000Z

83

Higher Rank Conformal Fields in the $Sp(2M)$ Symmetric Generalized Space-Time  

E-Print Network [OSTI]

We study various $Sp(2M)$ invariant field equations corresponding to rank $r$ tensor products of the Fock (singleton) representation of $Sp(2M)$. These equations are shown to describe localization on ``branes'' of different dimensions embedded into the generalized space-time $\\M_M$ with matrix (i.e., ``central charge'') coordinates. The case of bilinear tensor product is considered in detail. The conserved currents built from bilinears of rank 1 fields in $\\M_M$ are shown to satisfy the field equations of the rank 2 fields in $\\M_M$. Also, the rank 2 fields in $\\M_M$ are shown to be equivalent to the rank 1 fields in $\\M_{2M}$.

O. A. Gelfond; M. A. Vasiliev

2005-05-19T23:59:59.000Z

84

Convective heat flow probe  

DOE Patents [OSTI]

A convective heat flow probe device is provided which measures heat flow and fluid flow magnitude in the formation surrounding a borehole. The probe comprises an elongate housing adapted to be lowered down into the borehole; a plurality of heaters extending along the probe for heating the formation surrounding the borehole; a plurality of temperature sensors arranged around the periphery of the probe for measuring the temperature of the surrounding formation after heating thereof by the heater elements. The temperature sensors and heater elements are mounted in a plurality of separate heater pads which are supported by the housing and which are adapted to be radially expanded into firm engagement with the walls of the borehole. The heat supplied by the heater elements and the temperatures measured by the temperature sensors are monitored and used in providing the desired measurements. The outer peripheral surfaces of the heater pads are configured as segments of a cylinder and form a full cylinder when taken together. A plurality of temperature sensors are located on each pad so as to extend along the length and across the width thereof, with a heating element being located in each pad beneath the temperature sensors. An expansion mechanism driven by a clamping motor provides expansion and retraction of the heater pads and expandable packet-type seals are provided along the probe above and below the heater pads.

Dunn, J.C.; Hardee, H.C.; Striker, R.P.

1984-01-09T23:59:59.000Z

85

Logarithmic Fermi-liquid breakdown in NbFe2 M. Brando,1,  

E-Print Network [OSTI]

temperature dependence of the Sommerfeld coefficient = C/T of the specific heat capacity, C, over nearly two temperature dependences of the resistivity and of the heat capacity over extended ranges in temperatureLogarithmic Fermi-liquid breakdown in NbFe2 M. Brando,1, W. J. Duncan,1 D. Moroni-Klementowicz,1 C

Paris-Sud XI, Université de

86

INELASTIC NEUTRON SCATTERING SELECTION RULES OF 03B1 HgI2 M. SIESKIND  

E-Print Network [OSTI]

899 INELASTIC NEUTRON SCATTERING SELECTION RULES OF 03B1 HgI2 M. SIESKIND Laboratoire de The inelastic neutron scattering selection rules of 03B1 HgI2 in the directions 0394, 03A3 and 039B are derived Abstracts 63.20D Introduction. - Inelastic neutron scattering is a powerful technique for the determination

Boyer, Edmond

87

Smart Insulating Container with Anti-Theft Features by M2M Tracking  

E-Print Network [OSTI]

Smart Insulating Container with Anti-Theft Features by M2M Tracking Cheng-Ting Lee, Chun-Min ChangChen, Brucelai, TroyChiu}@itri.org.tw, pai.chou@gmail.com Abstract--This paper describes a smart insulating and responsive but also of low overhead. I. INTRODUCTION Smart insulating shipping containers are an important

Shinozuka, Masanobu

88

Multispectral imaging probe  

DOE Patents [OSTI]

A multispectral imaging probe delivers a range of wavelengths of excitation light to a target and collects a range of expressed light wavelengths. The multispectral imaging probe is adapted for mobile use and use in confined spaces, and is sealed against the effects of hostile environments. The multispectral imaging probe comprises a housing that defines a sealed volume that is substantially sealed from the surrounding environment. A beam splitting device mounts within the sealed volume. Excitation light is directed to the beam splitting device, which directs the excitation light to a target. Expressed light from the target reaches the beam splitting device along a path coaxial with the path traveled by the excitation light from the beam splitting device to the target. The beam splitting device directs expressed light to a collection subsystem for delivery to a detector.

Sandison, David R. (Moriarty, NM); Platzbecker, Mark R. (Albuquerque, NM); Descour, Michael R. (Tucson, AZ); Armour, David L. (Albuquerque, NM); Craig, Marcus J. (Albuquerque, NM); Richards-Kortum, Rebecca (Austin, TX)

1999-01-01T23:59:59.000Z

89

Multispectral imaging probe  

DOE Patents [OSTI]

A multispectral imaging probe delivers a range of wavelengths of excitation light to a target and collects a range of expressed light wavelengths. The multispectral imaging probe is adapted for mobile use and use in confined spaces, and is sealed against the effects of hostile environments. The multispectral imaging probe comprises a housing that defines a sealed volume that is substantially sealed from the surrounding environment. A beam splitting device mounts within the sealed volume. Excitation light is directed to the beam splitting device, which directs the excitation light to a target. Expressed light from the target reaches the beam splitting device along a path coaxial with the path traveled by the excitation light from the beam splitting device to the target. The beam splitting device directs expressed light to a collection subsystem for delivery to a detector. 8 figs.

Sandison, D.R.; Platzbecker, M.R.; Descour, M.R.; Armour, D.L.; Craig, M.J.; Richards-Kortum, R.

1999-07-27T23:59:59.000Z

90

Probing Mercury's Partnering Preferences  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home DesignPresentationsSRS Responds toPrivacy ActProbingProbing

91

Probing metal solidification nondestructively  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FORPoints ofProbing Strain-Induced ChangesProbing

92

Atom Probe Tomography | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone byDear Friend,Arthur J. NozikAtom Probe Tomography Atom Probe

93

Structure-Activity Relationships in NH3-SCR over Cu-SSZ-13 as Probed by Reaction Kinetics and EPR Studies  

SciTech Connect (OSTI)

Cu-SSZ-13 catalysts with various Cu loadings were prepared via solution ion exchange. The hydrated samples were studied with Electron Paramagnetic Resonance (EPR). Cu2+ ion coordination numbers were obtained by analyzing the hyperfine structures while Cu-Cu distances were estimated from line broadening of the EPR features. By coupling EPR and temperature-programmed reduction (TPR) results, two Cu2+ ion locations were suggested. Standard and fast NH3-SCR, as well as non-selective NH3 oxidation reactions were carried out over these catalysts at high space velocities. For the SCR reaction, intra-particle diffusion limitation was found throughout the reaction temperatures investigated. Although clear structure-activity relationships cannot be derived, the reaction results allow for reactant diffusivities and Cu2+ ion locations to be estimated. The slower NH3 oxidation reaction, on the other hand, is kinetically limited at low temperatures, and, therefore, allows for a correlation between Cu2+ ion location and reaction kinetics to be made. Furthermore, the dynamic Cu2+ ion motion as a function of temperature could also be derived from the NH3 oxidation kinetics.

Gao, Feng; Walter, Eric D.; Karp, Eric M.; Luo, Jin-Yong; Tonkyn, Russell G.; Kwak, Ja Hun; Szanyi, Janos; Peden, Charles HF

2013-04-01T23:59:59.000Z

94

Dark Energy Probes of Dark Energy  

E-Print Network [OSTI]

19/12/2013 1 Dark Energy Probes of Dark Energy Probes Dark Energy Supernovae Ia probing luminosity (Betti numbers) #12;19/12/2013 2 Dark Energy Probes: Comparison Method Strengths Weaknesses Systematics

Weijgaert, Rien van de

95

Sonar probing of concrete  

E-Print Network [OSTI]

ABSTRACT Sonar Probing of Concrete (May 1988) John H. Mims, B. A. , Carleton College Chairman of Advisory Committee: Dr. Robert R, Unterberger Two systems were used for acoustical tests at concrete dams. The first system used a pair of donated... reflections from several concrete-air interfaces at the Norfork Dam, Arkansas. A reflection between two walls in the dam's operating gallery which were 6. 73 m apart was recorded at 3. 4 ms (peak value). After subtracting the appropriate delays, this value...

Mims, John Hornsby

1988-01-01T23:59:59.000Z

96

The Active Stereo Probe: Dynamic Video Feedback  

E-Print Network [OSTI]

Siebert,J.P. Urquhart,C.W. Wilson,D.F. Mowforth,P.H. McDonald,J.P. Fryer,R.J. Proceedings of the British Machine Vision Conference 1991, Glasgow, UK, p.p. 383-386, 1991. pp 383-386

Siebert, J.P.

97

Consent Order, CH2M-WG Idaho, LLC - WCO-2011-01 | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energyon ArmedWaste andAccessCO2 InjectionDepartmentServices »Energy ConsentCH2M-WG

98

CH2M HILL Plateau Remediation Company, NEL-2014-01  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy Cooperation |South42.2 (AprilBiden SaysEnergy Office FY144 1.DOE F ProvisionCH2M HILL

99

Cybersecurity Capability Maturity Model (C2M2) | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phases onOrganization FY 2012 FYCustomer-Commentslo s a l a m o s s cC2M2

100

M2M Platform-as-a-Service for Sustainability Hong-Linh Truong and Schahram Dustdar  

E-Print Network [OSTI]

sustainability measurements (e.g., electricity consumption and GHG calculation). Research effort so far has beenM2M Platform-as-a-Service for Sustainability Governance Hong-Linh Truong and Schahram Dustdar-based M2M systems. We describe a Platform-as-a-Service for sustainability governance that implements

Dustdar, Schahram

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

CCT: Connect and Control Things A Novel Mobile Application to Manage M2M Devices and Endpoints  

E-Print Network [OSTI]

-to-Machine (M2M) market [1, 2]. IoT has also opened new vistas in smart metering, smart grid, smart city applications for IoT ecosystems totally indispensable. For example, in smart homes, M2M devices [6] are able

Gesbert, David

102

hnRNP L binds to CA repeats in the 3'UTR of bcl-2 mRNA  

SciTech Connect (OSTI)

We previously reported that the CA-repeat sequence in the 3'-untranslated region (3'UTR) of bcl-2 mRNA is involved in the decay of bcl-2 mRNA. However, the trans-acting factor for the CA element in bcl-2 mRNA remains unidentified. The heterogeneous nuclear ribonucleoprotein L (hnRNP L), an intron splicing factor, has been reported to bind to CA repeats and CA clusters in the 3'UTR of several genes. We reported herein that the CA repeats of bcl-2 mRNA have the potential to form a distinct ribonuclear protein complex in cytoplasmic extracts of MCF-7 cells, as evidenced by RNA electrophoretic mobility shift assays (REMSA). A super-shift assay using the hnRNP L antibody completely shifted the complex. Immunoprecipitation with the hnRNP L antibody and MCF-7 cells followed by RT-PCR revealed that hnRNP L interacts with endogenous bcl-2 mRNA in vivo. Furthermore, the suppression of hnRNP L in MCF-7 cells by the transfection of siRNA for hnRNP L resulted in a delay in the degradation of RNA transcripts including CA repeats of bcl-2 mRNA in vitro, suggesting that the interaction between hnRNPL and CA repeats of bcl-2 mRNA participates in destabilizing bcl-2 mRNA.

Lee, Dong-Hyoung; Lim, Mi-Hyun; Youn, Dong-Ye [Department of Biochemistry, College of Medicine, The Catholic University of Korea, 505 Banpo-Dong, Seocho-gu, Seoul 137-701 (Korea, Republic of)] [Department of Biochemistry, College of Medicine, The Catholic University of Korea, 505 Banpo-Dong, Seocho-gu, Seoul 137-701 (Korea, Republic of); Jung, Seung Eun [Department of Medical Science, The Graduate School, Yonsei University, Seoul (Korea, Republic of)] [Department of Medical Science, The Graduate School, Yonsei University, Seoul (Korea, Republic of); Ahn, Young Soo [Brain Korea 21 Project for Medical Science, Brain Research Institute, Department of Pharmacology, Yonsei University College of Medicine, Seoul (Korea, Republic of)] [Brain Korea 21 Project for Medical Science, Brain Research Institute, Department of Pharmacology, Yonsei University College of Medicine, Seoul (Korea, Republic of); Tsujimoto, Yoshihide [Department of Medical Genetics, Laboratory of Molecular Genetics, Osaka University Medical School, Osaka (Japan)] [Department of Medical Genetics, Laboratory of Molecular Genetics, Osaka University Medical School, Osaka (Japan); Lee, Jeong-Hwa, E-mail: leejh@catholic.ac.kr [Department of Biochemistry, College of Medicine, The Catholic University of Korea, 505 Banpo-Dong, Seocho-gu, Seoul 137-701 (Korea, Republic of)] [Department of Biochemistry, College of Medicine, The Catholic University of Korea, 505 Banpo-Dong, Seocho-gu, Seoul 137-701 (Korea, Republic of)

2009-05-08T23:59:59.000Z

103

Structural and Magnetic Properties of MCl2 (M = Fe, Mn, Co): Acetonitrile Solvates  

SciTech Connect (OSTI)

M{sup II}Cl{sub 2} (M = Mn, Fe, Co) as their acetonitrile solvates were isolated, and their structural, spectroscopic, and magnetic properties were studied. MCl{sub 2}(NCMe){sub 2} (M = Fe, Mn) form 1-D chains of octahedral M{sup II} ions with four bridging chlorides and two axial MeCN's. The presence of an axial distortion for MFe causes a significant magnetic anisotropy that increases significantly below 150 K; however, {chi}{sub av} [=({chi}{sub {parallel}} + 2{chi}{sub {perpendicular}})/3] almost coincides with the value obtained on a polycrystalline sample. MnCl{sub 2}(NCMe){sub 2} is a paramagnet with a weak antiferromagnetic coupling. Annealing FeCl{sub 2}(NCMe){sub 2} at 55 {sup o}C forms the monosolvate of FeCl{sub 2}(NCMe) composition in which two chains collapse into a double chain with formation of Fe-Cl bonding such that half of the {mu}-Cl's becomes {mu}{sub 3}-Cl's. This material orders magnetically below {Tc} = 4.3 K. For M = Co, paramagnetic tetrahedral [CoCl{sub 3}(NCMe)]{sup -} anions are isolated.

Pokhodnya,K.; Bonner, M.; DiPasquale, A.; Rheingold, A.; Her, J.; Stephens, P.; Park, J.; Kennon, B.; Arif, A.; Miller, J.

2007-01-01T23:59:59.000Z

104

Experimental probes of axions  

SciTech Connect (OSTI)

Experimental searches for axions or axion-like particles rely on semiclassical phenomena resulting from the postulated coupling of the axion to two photons. Sensitive probes of the extremely small coupling constant can be made by exploiting familiar, coherent electromagnetic laboratory techniques, including resonant enhancement of transitions using microwave and optical cavities, Bragg scattering, and coherent photon-axion oscillations. The axion beam may either be astrophysical in origin as in the case of dark matter axion searches and solar axion searches, or created in the laboratory from laser interactions with magnetic fields. This note is meant to be a sampling of recent experimental results.

Chou, Aaron S.; /Fermilab

2009-10-01T23:59:59.000Z

105

Electromagnetic Probes in PHENIX  

E-Print Network [OSTI]

Electromagnetic probes are arguably the most universal tools to study the different physics processes in high energy hadron and heavy ion collisions. In this paper we summarize recent measurements of real and virtual direct photons at central rapidity by the PHENIX experiment at RHIC in p+p, d+Au and Au+Au collisions. We also discuss the impact of the results and the constraints they put on theoretical models. At the end we report on the immediate as well as on the mid-term future of photon measurements at RHIC.

Gabor David

2006-09-21T23:59:59.000Z

106

(4-Methoxyphenyl)(3,4,5-trimethoxyphenyl)methanone inhibits tubulin polymerization, induces G{sub 2}/M arrest, and triggers apoptosis in human leukemia HL-60 cells  

SciTech Connect (OSTI)

(4-Methoxyphenyl)(3,4,5-trimethoxyphenyl)methanone (PHT) is a known cytotoxic compound belonging to the phenstatin family. However, the exact mechanism of action of PHT-induced cell death remains to be determined. The aim of this study was to investigate the mechanisms underlying PHT-induced cytotoxicity. We found that PHT displayed potent cytotoxicity in different tumor cell lines, showing IC{sub 50} values in the nanomolar range. Cell cycle arrest in G{sub 2}/M phase along with the augmented metaphase cells was found. Cells treated with PHT also showed typical hallmarks of apoptosis such as cell shrinkage, chromatin condensation, phosphatidylserine exposure, increase of the caspase 3/7 and 8 activation, loss of mitochondrial membrane potential, and internucleosomal DNA fragmentation without affecting membrane integrity. Studies conducted with isolated tubulin and docking models confirmed that PHT binds to the colchicine site and interferes in the polymerization of microtubules. These results demonstrated that PHT inhibits tubulin polymerization, arrests cancer cells in G{sub 2}/M phase of the cell cycle, and induces their apoptosis, exhibiting promising anticancer therapeutic potential. - Highlights: • PHT inhibits tubulin polymerization. • PHT arrests cancer cells in G{sub 2}/M phase of the cell cycle. • PHT induces caspase-dependent apoptosis.

Magalhães, Hemerson I.F. [Departamento de Fisiologia e Farmacologia, Faculdade de Medicina, Universidade Federal do Ceará, Fortaleza, Ceará (Brazil); Centro de Ciências da Saúde, Departamento de Ciências Farmacêuticas, Universidade Federal da Paraíba, João Pessoa, Paraíba (Brazil); Wilke, Diego V. [Departamento de Fisiologia e Farmacologia, Faculdade de Medicina, Universidade Federal do Ceará, Fortaleza, Ceará (Brazil); Bezerra, Daniel P., E-mail: danielpbezerra@gmail.com [Centro de Pesquisa Gonçalo Moniz, Fundação Oswaldo Cruz, Salvador, Bahia (Brazil); Cavalcanti, Bruno C. [Departamento de Fisiologia e Farmacologia, Faculdade de Medicina, Universidade Federal do Ceará, Fortaleza, Ceará (Brazil); Rotta, Rodrigo; Lima, Dênis P. de; Beatriz, Adilson [Centro de Ciências Exatas e Tecnológicas (Laboratório LP4), Universidade Federal do Mato Grosso do Sul, Campo Grande, Mato Grosso do Sul (Brazil); Moraes, Manoel O.; Diniz-Filho, Jairo [Departamento de Fisiologia e Farmacologia, Faculdade de Medicina, Universidade Federal do Ceará, Fortaleza, Ceará (Brazil); Pessoa, Claudia, E-mail: c_pessoa@yahoo.com [Departamento de Fisiologia e Farmacologia, Faculdade de Medicina, Universidade Federal do Ceará, Fortaleza, Ceará (Brazil)

2013-10-01T23:59:59.000Z

107

Probing Multiparton Correlations at CEBAF  

E-Print Network [OSTI]

In this talk, I explore the possibilities of probing the multiparton correlation functions at CEBAF at its current energy and the energies with its future upgrades.

Jianwei Qiu

1998-08-08T23:59:59.000Z

108

GRB optical and IR rapid follow-up with the 2 m Liverpool Robotic Telescope  

E-Print Network [OSTI]

The Liverpool Telescope, owned and operated by Liverpool John Moores University and situated at Roque de los Muchachos, La Palma, is the first 2-m, fully instrumented robotic telescope. We plan to use the LT in conjunction with Gamma Ray Observatories (HETE-2, INTEGRAL, Swift) to study GRB physics. A special over-ride mode will enable observations commencing less than a minute after the GRB alert, including optical and near infrared imaging and spectroscopy. These observations, together with systematic monitoring of the burst through the afterglow, will help to unravel the nature of prompt optical flashes, short bursts, optically dark bursts, redshift distribution, GRB - supernova connection and other questions related to the GRB phenomenon. In particular, the combination of aperture, instrumentation and rapid automated response makes the Liverpool Telescope excellently suited to the investigation of optically dark bursts and currently optically unstudied short bursts.

A. Gomboc; M. F. Bode; D. Carter; C. G. Mundell; A. M. Newsam; R. J. Smith; I. A. Steele

2003-10-06T23:59:59.000Z

109

Heat transfer probe  

DOE Patents [OSTI]

Apparatuses, systems, methods, and computer code for, among other things, monitoring the health of samples such as the brain while providing local cooling or heating. A representative device is a heat transfer probe, which includes an inner channel, a tip, a concentric outer channel, a first temperature sensor, and a second temperature sensor. The inner channel is configured to transport working fluid from an inner inlet to an inner outlet. The tip is configured to receive at least a portion of the working fluid from the inner outlet. The concentric outer channel is configured to transport the working fluid from the inner outlet to an outer outlet. The first temperature sensor is coupled to the tip, and the second temperature sensor spaced apart from the first temperature sensor.

Frank, Jeffrey I.; Rosengart, Axel J.; Kasza, Ken; Yu, Wenhua; Chien, Tai-Hsin; Franklin, Jeff

2006-10-10T23:59:59.000Z

110

Rotating concave eddy current probe  

SciTech Connect (OSTI)

A rotating concave eddy current probe for detecting fatigue cracks hidden from view underneath the head of a raised head fastener, such as a buttonhead-type rivet, used to join together structural skins, such as aluminum aircraft skins. The probe has a recessed concave dimple in its bottom surface that closely conforms to the shape of the raised head. The concave dimple holds the probe in good alignment on top of the rivet while the probe is rotated around the rivet's centerline. One or more magnetic coils are rigidly embedded within the probe's cylindrical body, which is made of a non-conducting material. This design overcomes the inspection impediment associated with widely varying conductivity in fastened joints.

Roach, Dennis P. (Albuquerque, NM); Walkington, Phil (Albuquerque, NM); Rackow, Kirk A. (Albuquerque, NM); Hohman, Ed (Albuquerque, NM)

2008-04-01T23:59:59.000Z

111

Enhanced G2-M Arrest by Nuclear Factor-KB-Dependent p21waf1/cip1  

E-Print Network [OSTI]

Enhanced G2-M Arrest by Nuclear Factor-KB-Dependent p21waf1/cip1 Induction Shelly M. Wuerzberger cell death. Importantly, p21waf1/cip1 was induced in S-G2-M phases in a NF-KB-dependent manner, and RNA­coupled induction of p21waf1/cip1 by NF-KB represents a resistance mechanism in certain cancer cells. (Mol Cancer

Miyamoto, Shigeki

112

Long duration ash probe  

DOE Patents [OSTI]

A long duration ash probe includes a pressure shell connected to a port in a combustor with a sample coupon mounted on a retractable carriage so as to retract the sample coupon within the pressure shell during soot blowing operation of the combustor. A valve mounted at the forward end of the pressure shell is selectively closeable to seal the sample coupon within the shell, and a heating element in the shell is operable to maintain the desired temperature of the sample coupon while retracted within the shell. The carriage is operably mounted on a pair of rails within the shell for longitudinal movement within the shell. A hollow carrier tube connects the hollow cylindrical sample coupon to the carriage, and extends through the carriage and out the rearward end thereof. Air lines are connected to the rearward end of the carrier tube and are operable to permit coolant to pass through the air lines and thence through the carrier tube to the sample coupon so as to cool the sample coupon. 8 figs.

Hurley, J.P.; McCollor, D.P.; Selle, S.J.

1994-07-26T23:59:59.000Z

113

Long duration ash probe  

DOE Patents [OSTI]

A long duration ash probe includes a pressure shell connected to a port in a combustor with a sample coupon mounted on a retractable carriage so as to retract the sample coupon within the pressure shell during sootblowing operation of the combustor. A valve mounted at the forward end of the pressure shell is selectively closeable to seal the sample coupon within the shell, and a heating element in the shell is operable to maintain the desired temperature of the sample coupon while retracted within the shell. The carriage is operably mounted on a pair of rails within the shell for longitudinal movement within the shell. A hollow carrier tube connects the hollow cylindrical sample coupon to the carriage, and extends through the carriage and out the rearward end thereof. Air lines are connected to the rearward end of the carrier tube and are operable to permit coolant to pass through the air lines and thence through the carrier tube to the sample coupon so as to cool the sample coupon.

Hurley, John P. (Grand Forks, ND); McCollor, Don P. (Grand Forks, ND); Selle, Stanley J. (Grand Forks, MN)

1994-01-01T23:59:59.000Z

114

Probing Organic Transistors with Infrared Beams  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Probing Organic Transistors with Infrared Beams Probing Organic Transistors with Infrared Beams Print Wednesday, 26 July 2006 00:00 Silicon-based transistors are well-understood,...

115

Optic probe for semiconductor characterization  

DOE Patents [OSTI]

Described herein is an optical probe (120) for use in characterizing surface defects in wafers, such as semiconductor wafers. The optical probe (120) detects laser light reflected from the surface (124) of the wafer (106) within various ranges of angles. Characteristics of defects in the surface (124) of the wafer (106) are determined based on the amount of reflected laser light detected in each of the ranges of angles. Additionally, a wafer characterization system (100) is described that includes the described optical probe (120).

Sopori, Bhushan L. (Denver, CO); Hambarian, Artak (Yerevan, AM)

2008-09-02T23:59:59.000Z

116

Differential probes aid flow measurement  

SciTech Connect (OSTI)

Nonconstricting differential pressure flow probes which help solve the problems of clogging, wear, and pressure loss at the Seawater Filtration Facility in Saudi Arabia are described. Treated seawater is pumped into oil-bearing formations for secondary recovery. Figures showing principle of operation for probes, installation schematic and long-term accuracy results (flow probes vs. orifice meters) are presented. The new diamond-shaped design flow sensor offers accurate flow measurement with low permanent pressure loss, which translates into cost savings for the operator.

Mesnard, D.R.

1982-07-01T23:59:59.000Z

117

Long-range spatial correlations in the turbulent edge plasma of the L-2M stellarator  

SciTech Connect (OSTI)

Long-range spatial correlations in the turbulent plasma of the L-2M stellarator were revealed experimentally, and their relation to the geometry of magnetic surfaces was analyzed (Plasma Phys. Control. Fusion 50, 045001 (2008)). The operation modes of the facility in which fast transport transitions in plasma are possible were studied. Upon these transitions, the turbulence level is found to decrease substantially. It is shown that long-range spatial correlations are typical of relatively narrow frequency ranges. In particular, before a transport transition, such frequency ranges are f ? 30–40 kHz and f ? 1–3 kHz. After the transition, long-range spatial correlations in the frequency range of f ? 30–40 kHz disappear due to a significant decrease in the turbulence level in this frequency range. At the same time, correlations in the low frequency range are retained and new correlations at frequencies of f ? 6-12 kHz occur. It is found that global electromagnetic oscillations in the frequency range of f ? 1–3 kHz are related to the m/n = 0/0 perturbation and its toroidal satellites (here, m and n are the poloidal and toroidal mode numbers, respectively). It is also shown that, after the transport transition, a three-dimensional localized electromagnetic mode at the frequency of the geodesic acoustic mode governed by the average magnetic field curvature is excited. At higher frequencies typical of a geodesic acoustic mode related to the three-dimensional curvature of the magnetic field, no long-range spatial correlations were observed both before and after the transport transition.

Vasil’kov, D. G., E-mail: vasilkov@fpl.gpi.ru; Kholnov, Yu. V.; Shchepetov, S. V. [Russian Academy of Sciences, Prokhorov General Physics Institute (Russian Federation)] [Russian Academy of Sciences, Prokhorov General Physics Institute (Russian Federation)

2013-08-15T23:59:59.000Z

118

Switchable stiffness scanning microscope probe  

E-Print Network [OSTI]

Atomic Force Microscopy (AFM) has rapidly gained widespread utilization as an imaging device and micro/nano-manipulator during recent years. This thesis investigates the new concept of a dual stiffness scanning probe with ...

Mueller-Falcke, Clemens T. (Clemens Tobias)

2005-01-01T23:59:59.000Z

119

Recent results from the CMD-2 detector at the VEPP-2M collider  

SciTech Connect (OSTI)

The general-purpose detector CMD-2 is taking data at the Novosibirsk VEPP-2M e{sup -}e{sup -} collider in the energy range 360-1400 MeV, with luminosity of {approx} 5.0 x 10{sup 30} cm{sup -2} s{sup -1} for the {phi} resonance region. Data from {approx} 1500 nb{sup -1} of integrated luminosity around 1.02 GeV and {approx}500 nb{sup -1} in the 600-1000 MeV range have been collected and preliminary analyses performed. We present progress in studies of the {phi} meson and K{sub S}K{sub L} systems: (a) measurement of the {phi} meson parameters; (b) searches for {phi} rare decays. The new upper limits B({phi}{yields}{eta}{prime} {gamma}) < 2.4 x 10{sup -4}, B({phi} {yields} {pi}{sup +}{pi}{sup -}{pi}{sup +}{pi}{sup -}) < 1.0 x 10{sup -4}, and B({phi} {yields} f{sub 0}{gamma}) < 8 x 10{sup -4} have been obtained; (c) the study of the K{sub L} interactions in the CsI calorimeter; (d) with the help of 32,340 tagged K{sub S}, the semi-rare decay of K{sub S} {yields} {pi}{sup +}{pi}{sup -}{gamma} has been observed with a branching ratio of (1.82 {+-} 0.49)x10{sup -3}; and (e) selection of events with K{sub S}K{sub L} coupled decays and interactions. The regeneration cross section of the low moments K{sub L} was found to be {sigma}{sub reg}{sup Be} = 63 {+-} 19 mb. Data from the 600-1000 MeV energy range are used for high-accuracy measurement of the e{sup +}e{sup -} annihilation cross section, and the preliminary analysis is presented in this paper.

Solodov, E.P. [Budker Institute of Nuclear Physics, Novosibirsk (Russian Federation)

1997-01-01T23:59:59.000Z

120

Oxygen Isotope Effects as Probes of Electron Transfer Mechanisms and Structures of  

E-Print Network [OSTI]

Oxygen Isotope Effects as Probes of Electron Transfer Mechanisms and Structures of Activated O2, Maryland 21218 RECEIVED ON JULY 26, 2008 C O N S P E C T U S Competitively determined oxygen (18 O) isotope effects can be power- ful probes of chemical and biological transformations involving molec- ular oxygen

Roth, Justine P.

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Rare-Earth Surface Alloying: A New Phase for GdAu2 M. J. Verstraete,1,2  

E-Print Network [OSTI]

refrigeration, are made pos- sible by an unusual group of elements: the rare earths (REs). The rare earthsRare-Earth Surface Alloying: A New Phase for GdAu2 M. Corso,1 M. J. Verstraete,1,2 F. Schiller,1 M. Gadolinium is a borderline rare earth, which is naturally ferromagnetic but can easily switch to different

122

Short Paper submitted to Bicycle Session at T2M Madrid 2012 Historical factors for better cycling  

E-Print Network [OSTI]

1 Short Paper submitted to Bicycle Session at T2M Madrid 2012 Historical factors for better, the bicycle as a transport mode has focused little historical research, at least available sources relating to cycling for transport1. The bicycle fleet is well

Paris-Sud XI, Université de

123

Hand-held survey probe  

DOE Patents [OSTI]

A system for providing operational feedback to a user of a detection probe may include an optical sensor to generate data corresponding to a position of the detection probe with respect to a surface; a microprocessor to receive the data; a software medium having code to process the data with the microprocessor and pre-programmed parameters, and making a comparison of the data to the parameters; and an indicator device to indicate results of the comparison. A method of providing operational feedback to a user of a detection probe may include generating output data with an optical sensor corresponding to the relative position with respect to a surface; processing the output data, including comparing the output data to pre-programmed parameters; and indicating results of the comparison.

Young, Kevin L. (Idaho Falls, ID) [Idaho Falls, ID; Hungate, Kevin E. (Idaho Falls, ID) [Idaho Falls, ID

2010-02-23T23:59:59.000Z

124

Nuclear Physics with Electroweak Probes  

E-Print Network [OSTI]

In recent years, the italian theoretical Nuclear Physics community has played a leading role in the development of a unified approach, allowing for a consistent and fully quantitative description of the nuclear response to electromagnetic and weak probes. In this paper I review the main achievements in both fields, point out some of the open problems, and outline the most promising prospects.

Omar Benhar

2009-02-26T23:59:59.000Z

125

Low-energy U(1) x USp(2M) gauge theory from simple high-energy gauge group  

E-Print Network [OSTI]

We give an explicit example of the embedding of a near BPS low-energy (U(1) x USp(2M))/Z_2 gauge theory into a high-energy theory with a simple gauge group and adjoint matter content. This system possesses degenerate monopoles arising from the high-energy symmetry breaking as well as non-Abelian vortices due to the symmetry breaking at low energies. These solitons of different codimensions are related by the exact homotopy sequences.

Sven Bjarke Gudnason; Kenichi Konishi

2010-05-17T23:59:59.000Z

126

Cantilevered probe detector with piezoelectric element  

DOE Patents [OSTI]

A disclosed chemical detection system for detecting a target material, such as an explosive material, can include a cantilevered probe, a probe heater coupled to the cantilevered probe, and a piezoelectric element disposed on the cantilevered probe. The piezoelectric element can be configured as a detector and/or an actuator. Detection can include, for example, detecting a movement of the cantilevered probe or a property of the cantilevered probe. The movement or a change in the property of the cantilevered probe can occur, for example, by adsorption of the target material, desorption of the target material, reaction of the target material and/or phase change of the target material. Examples of detectable movements and properties include temperature shifts, impedance shifts, and resonant frequency shifts of the cantilevered probe. The overall chemical detection system can be incorporated, for example, into a handheld explosive material detection system.

Adams, Jesse D. (Reno, NV); Sulchek, Todd A. (Oakland, CA); Feigin, Stuart C. (Reno, NV)

2012-07-10T23:59:59.000Z

127

Cantilevered probe detector with piezoelectric element  

DOE Patents [OSTI]

A disclosed chemical detection system for detecting a target material, such as an explosive material, can include a cantilevered probe, a probe heater coupled to the cantilevered probe, and a piezoelectric element disposed on the cantilevered probe. The piezoelectric element can be configured as a detector and/or an actuator. Detection can include, for example, detecting a movement of the cantilevered probe or a property of the cantilevered probe. The movement or a change in the property of the cantilevered probe can occur, for example, by adsorption of the target material, desorption of the target material, reaction of the target material and/or phase change of the target material. Examples of detectable movements and properties include temperature shifts, impedance shifts, and resonant frequency shifts of the cantilevered probe. The overall chemical detection system can be incorporated, for example, into a handheld explosive material detection system.

Adams, Jesse D; Sulchek, Todd A; Feigin, Stuart C

2014-04-29T23:59:59.000Z

128

Cantilevered probe detector with piezoelectric element  

DOE Patents [OSTI]

A disclosed chemical detection system for detecting a target material, such as an explosive material, can include a cantilevered probe, a probe heater coupled to the cantilevered probe, and a piezoelectric element disposed on the cantilevered probe. The piezoelectric element can be configured as a detector and/or an actuator. Detection can include, for example, detecting a movement of the cantilevered probe or a property of the cantilevered probe. The movement or a change in the property of the cantilevered probe can occur, for example, by adsorption of the target material, desorption of the target material, reaction of the target material and/or phase change of the target material. Examples of detectable movements and properties include temperature shifts, impedance shifts, and resonant frequency shifts of the cantilevered probe. The overall chemical detection system can be incorporated, for example, into a handheld explosive material detection system.

Adams, Jesse D; Sulchek, Todd A; Feigin, Stuart C

2013-04-30T23:59:59.000Z

129

Handheld force-controlled ultrasound probe  

E-Print Network [OSTI]

An hand-held force controlled ultrasound probe has been developed. The controller maintains a prescribed contact force between the probe and a patient's body. The device will enhance the diagnostic capability of free-hand ...

Gilbertson, Matthew Wright

2010-01-01T23:59:59.000Z

130

H2-M polymorphism in mice susceptible to collagen-induced arthritis involves the peptide binding groove  

SciTech Connect (OSTI)

The ability to develop type II collagen (CII)-induced arthritis (CIA) in mice is associated with the major histocompatibility I-A gene and with as yet poorly defined regulatory molecules of the major histocompatibility complex (MHC) class II antigen processing and presentation pathway. H2-M molecules are thought to be involved in the loading of antigenic peptides into the MHC class II binding cleft. We sequenced H2-Ma, H2-Mb1, and H2-Mb2 genes from CIA-susceptible and -resistant mouse strains and identified four different Ma and Mb2 alleles, and three different Mb1 alleles defined by polymorphic residues within the predicted peptide binding groove. Most CIA-resistant mouse strains share common Ma, Mb1, and Mb2 alleles. In contrast, H2-M alleles designated Ma-III, Ma-IV, Mb1-III, and Mb2-IV could be exclusively identified in the CIA-susceptible H2{sup r} and H2{sup q} haplotypes, suggesting that allelic H2-M molecules may modulate the composition of different CII peptides loaded onto MHC class II molecules, presumably presenting {open_quotes}arthritogenic{close_quotes} epitopes to T lymphocytes. 42 refs., 4 figs., 3 tabs.

Walter, W.; Loos, M.; Maeurer, M.J. [Johannes Gutenberg Univ., Mainz (Germany)] [Johannes Gutenberg Univ., Mainz (Germany)

1996-12-31T23:59:59.000Z

131

IEEE JOURNAL OF SOLID-STATE CIRCUITS, VOL. 42, NO. 9, SEPTEMBER 2007 2021 A 0.2-mW 2-Mb/s Digital Transceiver Based  

E-Print Network [OSTI]

IEEE JOURNAL OF SOLID-STATE CIRCUITS, VOL. 42, NO. 9, SEPTEMBER 2007 2021 A 0.2-mW 2-Mb/s Digital rate of 1.1 10 7, dissipating only 0.2 mW from a 1-V supply generated by a 1.5-V battery. Index Terms body, corresponding to 1­2 m. Moreover, it should be powered by a very small battery in order

Yoo, Hoi-Jun

132

Downhole probes evaluate cavern integrity  

SciTech Connect (OSTI)

Obtaining natural-gas storage caverns` pressures and temperatures with downhole probes has allowed TransGas Ltd., Regina, to monitor and evaluate cavern integrity. TransGas has more than 5 years` experience with the devices. The acquired data have also helped determine gas-in-place inventory and confirm and assess changes in spatial volumes. These changes may have resulted from cavern creep (shrinkage or closure) or downhole abnormality such as fluid infill or collapse of the side walls or roof. This first of two articles presents background and many of the details and lessons to date of TransGas` cavern gas-storage probe program; the conclusion describes a specific storage site with some results.

Crossley, N.G. [TransGas Ltd., Regina, Saskatchewan (Canada)

1997-03-03T23:59:59.000Z

133

Memorandum, CH2M HG Idaho, LLC, Request for Variance to Title 10 Code of Federal Regulations part 851, "Worker Safety and Health"  

Broader source: Energy.gov [DOE]

CH2M HG Idaho, LLC, Request for Variance to Title 10 Code of Federal Regulations part 851, "Worker Safety and Health"

134

Optical probe with reference fiber  

DOE Patents [OSTI]

A system for characterizing tissue includes the steps of generating an emission signal, generating a reference signal, directing the emission signal to and from the tissue, directing the reference signal in a predetermined manner relative to the emission signal, and using the reference signal to compensate the emission signal. In one embodiment compensation is provided for fluctuations in light delivery to the tip of the probe due to cable motion.

Da Silva, Luiz B. (Danville, CA); Chase, Charles L. (Dublin, CA)

2006-03-14T23:59:59.000Z

135

pH Meter probe assembly  

DOE Patents [OSTI]

An assembly for mounting a pH probe in a flowing solution, such as a sanitary sewer line, which prevents the sensitive glass portion of the probe from becoming coated with grease, oil, and other contaminants, whereby the probe gives reliable pH indication over an extended period of time. The pH probe assembly utilizes a special filter media and a timed back-rinse feature for flushing clear surface contaminants of the filter. The flushing liquid is of a known pH and is utilized to check performance of the probe.

Hale, Charles J. (San Jose, CA)

1983-01-01T23:59:59.000Z

136

pH Meter probe assembly  

DOE Patents [OSTI]

An assembly for mounting a pH probe in a flowing solution, such as a sanitary sewer line, which prevents the sensitive glass portion of the probe from becoming coated with grease, oil, and other contaminants, whereby the probe gives reliable pH indication over an extended period of time. The pH probe assembly utilizes a special filter media and a timed back-rinse feature for flushing clear surface contaminants of the filter. The flushing liquid is of a known pH and is utilized to check performance of the probe. 1 fig.

Hale, C.J.

1983-11-15T23:59:59.000Z

137

Effect of microwave reflection from the region of electron cyclotron resonance heating in the L-2M stellarator  

SciTech Connect (OSTI)

In experiments on electron cyclotron resonance (ECR) heating of plasma at the second harmonic of the electron gyrofrequency in the L-2M stellarator, the effect of partial reflection of high-power gyrotron radiation from the ECR heating region located in the center of the plasma column was revealed. The reflection coefficient is found to be on the order of 10{sup ?3}. The coefficient of reflection of an extraordinary wave from the second-harmonic ECR region is calculated in the one-dimensional full-wave model. The calculated and measured values of the reflection coefficient are found to coincide in order of magnitude.

Batanov, G. M.; Borzosekov, V. D.; Kolik, L. V.; Konchekov, E. M.; Malakhov, D. V.; Petrov, A. E.; Sarksyan, K. A.; Sakharov, A. S., E-mail: sakh@fpl.gpi.ru; Skvortsova, N. N.; Stepakhin, V. D.; Kharchev, N. K. [Russian Academy of Sciences, Prokhorov General Physics Institute (Russian Federation)] [Russian Academy of Sciences, Prokhorov General Physics Institute (Russian Federation)

2013-11-15T23:59:59.000Z

138

updated_supplemental_lists_1m-2m-3l-04-05-2012.xlsx | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment of EnergyofDepartmentDEPARTMENT wasm-2m-3l-04-05-2012.xlsx More

139

Surface acoustic wave probe implant for predicting epileptic seizures  

DOE Patents [OSTI]

A system and method for predicting and avoiding a seizure in a patient. The system and method includes use of an implanted surface acoustic wave probe and coupled RF antenna to monitor temperature of the patient's brain, critical changes in the temperature characteristic of a precursor to the seizure. The system can activate an implanted cooling unit which can avoid or minimize a seizure in the patient.

Gopalsami, Nachappa (Naperville, IL); Kulikov, Stanislav (Sarov, RU); Osorio, Ivan (Leawood, KS); Raptis, Apostolos C. (Downers Grove, IL)

2012-04-24T23:59:59.000Z

140

All Sky Camera, LIDAR and Electric Field Meter: auxiliary instruments for the ASTRI SST-2M prototype  

E-Print Network [OSTI]

ASTRI SST-2M is the end-to-end prototype telescope of the Italian National Institute of Astro- physics, INAF, designed to investigate the 10-100 TeV band in the framework of the Cherenkov Telescope Array, CTA. The ASTRI SST-2M telescope has been installed in Italy in September 2014, at the INAF ob- serving station located at Serra La Nave on Mount Etna. The telescope is foreseen to be completed and fully operative in spring 2015 including auxiliary instrumentation needed to support both operations and data anal- ysis. In this contribution we present the current status of a sub-set of the auxiliary instruments that are being used at the Serra La Nave site, namely an All Sky Camera, an Electric Field Meter and a Raman Lidar devoted, together with further instrumentation, to the monitoring of the atmospheric and environmental conditions. The data analysis techniques under development for these instruments could be applied at the CTA sites, where similar auxiliary instrumentation will be installed.

Leto, Giuseppe; Bellassai, Giancarlo; Bruno, Pietro; Maccarone, Maria Concetta; Martinetti, Eugenio

2015-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Entangled quantum probes for dynamical environmental noise  

E-Print Network [OSTI]

We address the use of entangled qubits as quantum probes to characterize the dynamical noise induced by complex environments. In particular, we show that entangled probes improve estimation of the correlation time for a broad class of environmental noises compared to any sequential strategy involving single qubit preparation. The effect is present when the noise is faster than a threshold value, a regime which may always be achieved by tuning the coupling between the quantum probe and the environment inducing the noise. Our scheme exploits time-dependent sensitivity of quantum systems to decoherence and does not require dynamical control on the probes. We derive the optimal interaction time and the optimal probe preparation, showing that it corresponds to multiqubit GHZ states when entanglement is useful. We also show robustness of the scheme against depolarization or dephasing of the probe, and discuss simple measurements approaching optimal precision.

Matteo A. C. Rossi; Matteo G. A. Paris

2015-03-11T23:59:59.000Z

142

Tunable nanowire nonlinear optical probe  

SciTech Connect (OSTI)

One crucial challenge for subwavelength optics has been thedevelopment of a tunable source of coherent laser radiation for use inthe physical, information, and biological sciences that is stable at roomtemperature and physiological conditions. Current advanced near-fieldimaging techniques using fiber-optic scattering probes1,2 have alreadyachieved spatial resolution down to the 20-nm range. Recently reportedfar-field approaches for optical microscopy, including stimulatedemission depletion (STED)3, structured illumination4, and photoactivatedlocalization microscopy (PALM)5, have also enabled impressive,theoretically-unlimited spatial resolution of fluorescent biomolecularcomplexes. Previous work with laser tweezers6-8 has suggested the promiseof using optical traps to create novel spatial probes and sensors.Inorganic nanowires have diameters substantially below the wavelength ofvisible light and have unique electronic and optical properties9,10 thatmake them prime candidates for subwavelength laser and imagingtechnology. Here we report the development of an electrode-free,continuously-tunable coherent visible light source compatible withphysiological environments, from individual potassium niobate (KNbO3)nanowires. These wires exhibit efficient second harmonic generation(SHG), and act as frequency converters, allowing the local synthesis of awide range of colors via sum and difference frequency generation (SFG,DFG). We use this tunable nanometric light source to implement a novelform of subwavelength microscopy, in which an infrared (IR) laser is usedto optically trap and scan a nanowire over a sample, suggesting a widerange of potential applications in physics, chemistry, materials science,and biology.

Nakayama, Yuri; Pauzauskie, Peter J.; Radenovic, Aleksandra; Onorato, Robert M.; Saykally, Richard J.; Liphardt, Jan; Yang, Peidong

2008-02-18T23:59:59.000Z

143

Probing Organic Transistors with Infrared Beams  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Probing Organic Transistors with Infrared Beams Print Silicon-based transistors are well-understood, basic components of contemporary electronic technology. In contrast, there is...

144

PROBING DENSE NUCLEAR MATTER VIA NUCLEAR COLLISIONS  

E-Print Network [OSTI]

University of California. LBL-12095 Probing Dense NuclearMatter Nuclear Collisions* v~a H. Stocker, M.Gyulassy and J. Boguta Nuclear Science Division Lawrence

Stocker, H.

2012-01-01T23:59:59.000Z

145

Free-energy profiles along reduction pathways of MoS2 M-edge and S-edge by dihydrogen: a first-principles study  

E-Print Network [OSTI]

We present the results of DFT calculations of free energy profiles along the reaction pathways starting from 50% coverage of MoS2 M-edge and 100% coverage of S-edge by sulfur, and leading to 37% coverage, i.e. creation of anionic vacancies, upon reduction by dihydrogen and production of H2S. Significant entropic and enthalpic corrections to electronic energies are deduced from the sets of normal modes vibration frequencies computed for all stationary and transition states. On that basis, we revisit and discuss the surface phase diagrams for M- and S- edges as a function of temperature, H2 partial pressure and H2S/H2 molar ratio, with respect to ranges of conditions relevant to industrial hydrotreating operations. We show that in such conditions, anionic vacancies on the M-edge, and surface SH groups on the M- and S- edges, may coexist at equilibrium. Moderate activation barriers connect stationary states along all paths explored.

Prodhomme, Pierre-Yves; Toulhoat, Hervé; 10.1016/j.jcat.2011.03.017

2011-01-01T23:59:59.000Z

146

Optically pumped whispering-gallery mode lasing from 2-?m GaN micro-disks pivoted on Si  

SciTech Connect (OSTI)

2-?m micro-disks containing InGaN/GaN quantum wells supported on a tiny Si nanotip are fabricated via microsphere lithography followed by dry and wet etch processes. The micro-disks are studied by photoluminescence at both room-temperature and 10?K. Optically pumped blue lasing at room-temperature is observed via whispering-gallery modes (WGMs) with a lasing threshold as low as 8.43 mJ/cm{sup 2}. Optical resonances in the micro-disks are studied through numerical computations and finite-difference time-domain simulations. The WGMs are further confirmed through the measured broadband transmission spectrum, whose transmission minima coincide well with predicted WGM frequencies.

Zhang, Yiyun; Ma, Zetao; Zhang, Xuhui; Choi, H. W., E-mail: hwchoi@hku.hk [Department of Electrical and Electronic Engineering, The University of Hong Kong, Pokfulam Road (Hong Kong); Wang, T. [Department of Electronic and Electrical Engineering, University of Sheffield, Mappin Street, Sheffield S1 3JD (United Kingdom)

2014-06-02T23:59:59.000Z

147

The Liverpool Telescope: Rapid follow-up observation of Targets of opportunity with a 2 m robotic telescope  

E-Print Network [OSTI]

The Liverpool Telescope, situated at Roque de los Muchachos Observatory, La Palma, Canaries, is the first 2-m, fully instrumented robotic telescope. It recently began observations. Among Liverpool Telescope's primary scientific goals is to monitor variable objects on all timescales from seconds to years. An additional benefit of its robotic operation is rapid reaction to unpredictable phenomena and their systematic follow up, simultaneous or coordinated with other facilities. The Target of Opportunity Programme of the Liverpool Telescope includes the prompt search for and observation of GRB and XRF counterparts. A special over-ride mode implemented for GRB/XRF follow-up enables observations commencing less than a minute after the alert, including optical and near infrared imaging and spectroscopy. In particular, the moderate aperture and rapid automated response make the Liverpool Telescope excellently suited to help solving the mystery of optically dark GRBs and for the investigation of currently unstudied short bursts and XRFs.

A. Gomboc; M. F. Bode; D. Carter; C. G. Mundell; A. M. Newsam; R. J. Smith; I. A. Steele

2003-11-04T23:59:59.000Z

148

induction-mode probe | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

The Role of FeS in Initial Activation and Performance Degradation of Na-NiCl2 Batteries. Abstract: The role of iron sulfide (FeS) in initial cell activation and degradation in the...

149

Cavitation controlled acoustic probe for fabric spot cleaning and moisture monitoring  

DOE Patents [OSTI]

A method and apparatus are provided for monitoring a fabric. An acoustic probe generates acoustic waves relative to the fabric. An acoustic sensor, such as an accelerometer is coupled to the acoustic probe for generating a signal representative of cavitation activity in the fabric. The generated cavitation activity representative signal is processed to indicate moisture content of the fabric. A feature of the invention is a feedback control signal is generated responsive to the generated cavitation activity representative signal. The feedback control signal can be used to control the energy level of the generated acoustic waves and to control the application of a cleaning solution to the fabric.

Sheen, Shuh-Haw (Naperville, IL); Chien, Hual-Te (Naperville, IL); Raptis, Apostolos C. (Downers Grove, IL)

1997-01-01T23:59:59.000Z

150

Comparing the performance of plasma impedance probes and Langmuir probes for RF plasma diagnostics  

E-Print Network [OSTI]

Comparing the performance of plasma impedance probes and Langmuir probes for RF plasma diagnostics probing, a less developed technique, can possibly overcome these problems. Better plasma diagnostic tools Ethan Dale, Dr. Mitchell Walker High-Power Electric Propulsion Laboratory Objective Plasma is the most

Walker, Mitchell

151

MERIT Pump/Probe Data OutlineOutline  

E-Print Network [OSTI]

MERIT Pump/Probe Data Analysis OutlineOutline The pump/probe program Particle detector response correction Pump/probe analysis results NFMCC Collaboration Meeting , LBNL, January 26, 2009 Ilias Efthymiopoulos - CERN #12;The pump/probe program #12;The pump/probe program Use of the CERN PS flexibility

McDonald, Kirk

152

Scanning Probe Microscopy Studies of Carbon Nanotubes  

E-Print Network [OSTI]

Scanning Probe Microscopy Studies of Carbon Nanotubes Teri Wang Odom1 , Jason H. Hafner1 relationship between Single-Walled Carbon Nanotube (SWNT) atomic structure and electronic properties, (2, properties and application of carbon nanotube probe microscopy tips to ultrahigh resolution and chemically

Odom, Teri W.

153

RT in situ PCR detection of MART-1 and TRP-2 mRNA in formalin-fixed, paraffin-embedded tissues of melanoma and nevi.  

E-Print Network [OSTI]

Cochran AJ. Detection of tyrosinase mRNA in formalin-fixed,PM, Hearing VJ. A second tyrosinase- related protein, TRP-2,mRNA isoforms of the tyrosinase-related protein-2/DOPAchrome

Itakura, Eijun; Huang, Rong-Rong; Wen, Duan-Ren; Paul, Eberhard; Wünsch, Peter H; Cochran, Alistair J

2008-01-01T23:59:59.000Z

154

Rugged fiber optic probe for raman measurement  

DOE Patents [OSTI]

An optical probe for conducting light scattering analysis is disclosed. The probe comprises a hollow housing and a probe tip. A fiber assembly made up of a transmitting fiber and a receiving bundle is inserted in the tip. A filter assembly is inserted in the housing and connected to the fiber assembly. A signal line from the light source and to the spectrometer also is connected to the filter assembly and communicates with the fiber assembly. By using a spring-loaded assembly to hold the fiber connectors together with the in-line filters, complex and sensitive alignment procedures are avoided. The close proximity of the filter assembly to the probe tip eliminates or minimizes self-scattering generated by the optical fiber. Also, because the probe can contact the sample directly, sensitive optics can be eliminated.

O'Rourke, Patrick E. (Martinez, GA); Toole, Jr., William R. (Aiken, SC); Nave, Stanley E. (Evans, GA)

1998-01-01T23:59:59.000Z

155

Protective shield for an instrument probe  

DOE Patents [OSTI]

A shield is disclosed that is particularly useful for protecting exposed optical elements at the end of optical probes used in the analysis of hazardous emissions in and around an industrial environment from the contaminating effects of those emissions. The instant invention provides a hood or cowl in the shape of a right circular cylinder that can be fitted over the end of such optical probes. The hood provides a clear aperture through which the probe can perform unobstructed analysis. The probe optical elements are protected from the external environment by passing a dry gas through the interior of the hood and out through the hood aperture in sufficient quantity and velocity to prevent any significant mixing between the internal and external environments. Additionally, the hood is provided with a cooling jacket to lessen the potential for damaging the probe due to temperature excursions.

Johnsen, Howard A.; Ross, James R.; Birtola, Sal R.

2004-10-26T23:59:59.000Z

156

Individual quantum probes for optimal thermometry  

E-Print Network [OSTI]

The unknown temperature of a sample may be estimated with minimal disturbance by putting it in thermal contact with an individual quantum probe. If the interaction time is sufficiently long so that the probe thermalizes, the temperature can be read out directly from its steady state. Here we prove that the optimal quantum probe, acting as a thermometer with maximal thermal sensitivity, is an effective two-level atom with a maximally degenerate excited state. When the total interaction time is insufficient to produce full thermalization, we optimize the estimation protocol by breaking it down into sequential stages of probe preparation, thermal contact and measurement. We observe that frequently interrogated probes initialized in the ground state achieve the best performance. For both fully and partly thermalized thermometers, the sensitivity grows significantly with the number of levels, though optimization over their energy spectrum remains always crucial.

Luis A. Correa; Mohammad Mehboudi; Gerardo Adesso; Anna Sanpera

2014-11-23T23:59:59.000Z

157

Methods for radiation detection and characterization using a multiple detector probe  

DOE Patents [OSTI]

Apparatuses, methods, and systems relating to radiological characterization of environments are disclosed. Multi-detector probes with a plurality of detectors in a common housing may be used to substantially concurrently detect a plurality of different radiation activities and types. Multiple multi-detector probes may be used in a down-hole environment to substantially concurrently detect radioactive activity and contents of a buried waste container. Software may process, analyze, and integrate the data from the different multi-detector probes and the different detector types therein to provide source location and integrated analysis as to the source types and activity in the measured environment. Further, the integrated data may be used to compensate for differential density effects and the effects of radiation shielding materials within the volume being measured.

Akers, Douglas William; Roybal, Lyle Gene

2014-11-04T23:59:59.000Z

158

Probing Signal Design for Power System Identification  

SciTech Connect (OSTI)

This paper investigates the design of effective input signals for low-level probing of power systems. In 2005, 2006, and 2008 the Western Electricity Coordinating Council (WECC) conducted four large-scale system wide tests of the western interconnected power system where probing signals were injected by modulating the control signal at the Celilo end of the Pacific DC intertie. A major objective of these tests is the accurate estimation of the inter-area electromechanical modes. A key aspect of any such test is the design of an effective probing signal that leads to measured outputs rich in information about the modes. This paper specifically studies low-level probing signal design for power-system identification. The paper describes the design methodology and the advantages of this new probing signal which was successfully applied during these tests. This probing input is a multi-sine signal with its frequency content focused in the range of the inter-area modes. The period of the signal is over two minutes providing high-frequency resolution. Up to 15 cycles of the signal are injected resulting in a processing gain of 15. The resulting system response is studied in the time and frequency domains. Because of the new probing signal characteristics, these results show significant improvement in the output SNR compared to previous tests.

Pierre, John W.; Zhou, Ning; Tuffner, Francis K.; Hauer, John F.; Trudnowski, Daniel J.; Mittelstadt, William

2010-05-31T23:59:59.000Z

159

Atmospheric Solids Analysis Probe Mass Spectrometry: A New Approach...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Atmospheric Solids Analysis Probe Mass Spectrometry: A New Approach for Airborne Particle Analysis. Atmospheric Solids Analysis Probe Mass Spectrometry: A New Approach for Airborne...

160

Understanding Atom Probe Tomography of Oxide-Supported Metal...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Atom Probe Tomography of Oxide-Supported Metal Nanoparticles by Correlation with Atomic Resolution Electron Understanding Atom Probe Tomography of Oxide-Supported Metal...

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Probing Organic Transistors with Infrared Beams  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home DesignPresentationsSRS Responds toPrivacy ActProbingProbingProbing

162

Catheter based magnetic resonance compatible perfusion probe  

E-Print Network [OSTI]

Neurosurgeons are using a thermal based technique to quantify brain perfusion. The thermal diffusion probe (TDP) technology measures perfusion in a relatively small volume of brain tissue. The neurosurgeon chooses the ...

Toretta, Cara Lynne

2007-01-01T23:59:59.000Z

163

Modulated microwave microscopy and probes used therewith  

DOE Patents [OSTI]

A microwave microscope including a probe tip electrode vertically positionable over a sample and projecting downwardly from the end of a cantilever. A transmission line connecting the tip electrode to the electronic control system extends along the cantilever and is separated from a ground plane at the bottom of the cantilever by a dielectric layer. The probe tip may be vertically tapped near or at the sample surface at a low frequency and the microwave signal reflected from the tip/sample interaction is demodulated at the low frequency. Alternatively, a low-frequency electrical signal is also a non-linear electrical element associated with the probe tip to non-linearly interact with the applied microwave signal and the reflected non-linear microwave signal is detected at the low frequency. The non-linear element may be semiconductor junction formed near the apex of the probe tip or be an FET formed at the base of a semiconducting tip.

Lai, Keji; Kelly, Michael; Shen, Zhi-Xun

2012-09-11T23:59:59.000Z

164

Lecture Notes on Langmuir Probe Diagnostics  

E-Print Network [OSTI]

University of California, Los Angeles Mini-Course on Plasma Diagnostics, IEEE-ICOPS meeting, Jeju, KoreaLecture Notes on Langmuir Probe Diagnostics Francis F. Chen Electrical Engineering Department...................................................................25 1. Fully ionized plasmas

Chen, Francis F.

165

Surface sampling concentration and reaction probe  

DOE Patents [OSTI]

A method of analyzing a chemical composition of a specimen is described. The method can include providing a probe comprising an outer capillary tube and an inner capillary tube disposed co-axially within the outer capillary tube, where the inner and outer capillary tubes define a solvent capillary and a sampling capillary in fluid communication with one another at a distal end of the probe; contacting a target site on a surface of a specimen with a solvent in fluid communication with the probe; maintaining a plug volume proximate a solvent-specimen interface, wherein the plug volume is in fluid communication with the probe; draining plug sampling fluid from the plug volume through the sampling capillary; and analyzing a chemical composition of the plug sampling fluid with an analytical instrument. A system for performing the method is also described.

Van Berkel, Gary J; Elnaggar, Mariam S

2013-07-16T23:59:59.000Z

166

Probes of strong-field gravity  

E-Print Network [OSTI]

In this thesis, I investigate several ways to probe gravity in the strong-field regime. These investigations focus on observables from the gravitational dynamics, i.e. when time derivatives are large: thus I focus on sources ...

Stein, Leo Chaim

2012-01-01T23:59:59.000Z

167

Single Molecule Probes of Lipid Membrane Structure  

E-Print Network [OSTI]

Biological membranes are highly heterogeneous structures that are thought to use this heterogeneity to organize and modify the function of membrane constituents. Probing membrane organization, structure, and changes therein ...

Livanec, Philip W.

2009-12-14T23:59:59.000Z

168

Self-referencing remote optical probe  

DOE Patents [OSTI]

A probe for remote spectrometric measurements of fluid samples having a hollow probe body with a sliding reflective plug therein and a lens at one end, ports for admitting and expelling the fluid sample and a means for moving the reflector so that reference measurement can be made with the reflector in a first position near the lens and a sample measurement can be made with the reflector away from the lens and the fluid sample between the reflector and the lens. Comparison of the two measurements will yield the composition of the fluid sample. The probe is preferably used for remote measurements and light is carried to and from the probe via fiber optic cables.

O'Rourke, Patrick E. (157 Greenwood Dr., Martinez, GA 30907); Prather, William S. (2419 Dickey Rd., Augusta, GA 30906); Livingston, Ronald R. (137 Breckenridge Dr., N. Augusta, GA)

1991-01-01T23:59:59.000Z

169

Self-referencing remote optical probe  

DOE Patents [OSTI]

A probe is described for remote spectrometric measurements of fluid samples having a hollow probe body with a sliding reflective plug therein and a lens at one end, ports for admitting and expelling the fluid sample and a means for moving the reflector so that reference measurement can be made with the reflector in a first position near the lens and a sample measurement can be made with the reflector away from the lens and the fluid sample between the reflector and the lens. Comparison of the two measurements will yield the composition of the fluid sample. The probe is preferably used for remote measurements and light is carried to and from the probe via fiber optic cables. 3 figures.

O'Rourke, P.E.; Prather, W.S.; Livingston, R.R.

1991-08-13T23:59:59.000Z

170

Structure-Activity Relationships in NH3-SCR over Cu-SSZ-13 as...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Relationships in NH3-SCR over Cu-SSZ-13 as Probed by Reaction Kinetics and EPR Studies. Structure-Activity Relationships in NH3-SCR over Cu-SSZ-13 as Probed by...

171

Synthetic active site probes for PKS and NRPS biosynthetic enzymes  

E-Print Network [OSTI]

7R D VROXWLRQ RI WKH D]LGH PJ PPRO LQ 7+) P/ 33K PJ PPRO DQGM 6\\QWKHVLV RI %LRWLQ$]LGH %LRWLQ PJ PPRO D]LGRHWKDQDPLQH PJIRXQG 7R D VROXWLRQ RI WKH D]LGH E PJ PPRO LQ 7+) P/ 33K PJ

Meier, Jordan Leslie

2009-01-01T23:59:59.000Z

172

active oxygen probe: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

CERN Preprints Summary: I present here the results of the first principles studies of the adsorption energetics of the intermediates of the oxygen electro-reduction reaction (ORR)...

173

AdHoc Probe: End-to-end Capacity Probing in Wireless Ad Hoc Networks  

E-Print Network [OSTI]

AdHoc Probe: End-to-end Capacity Probing in Wireless Ad Hoc Networks Ling-Jyh Chen1 , Tony Sun2 and systematic study in ad hoc, multihop wireless networks is still lacking. Yet the rate of a wireless link can deployment. In this paper, we present AdHoc Probe, a packet-pair based technique, to estimate end-to-end path

Chen, Ling-Jyh

174

Fiber optic probe for light scattering measurements  

DOE Patents [OSTI]

A fiber optic probe and a method for using the probe for light scattering analyses of a sample. The probe includes a probe body with an inlet for admitting a sample into an interior sample chamber, a first optical fiber for transmitting light from a source into the chamber, and a second optical fiber for transmitting light to a detector such as a spectrophotometer. The interior surface of the probe carries a coating that substantially prevents non-scattered light from reaching the second fiber. The probe is placed in a region where the presence and concentration of an analyte of interest are to be detected, and a sample is admitted into the chamber. Exciting light is transmitted into the sample chamber by the first fiber, where the light interacts with the sample to produce Raman-scattered light. At least some of the Raman-scattered light is received by the second fiber and transmitted to the detector for analysis. Two Raman spectra are measured, at different pressures. The first spectrum is subtracted from the second to remove background effects, and the resulting sample Raman spectrum is compared to a set of stored library spectra to determine the presence and concentration of the analyte.

Nave, Stanley E. (Evans, GA); Livingston, Ronald R. (Aiken, SC); Prather, William S. (Augusta, GA)

1995-01-01T23:59:59.000Z

175

Fiber optic probe for light scattering measurements  

DOE Patents [OSTI]

This invention is comprised of a fiber optic probe and a method for using the probe for light scattering analyses of a sample. The probe includes a probe body with an inlet for admitting a sample into an interior sample chamber, a first optical fiber for transmitting light from a source into the chamber, and a second optical fiber for transmitting light to a detector such as a spectrophotometer. The interior surface of the probe carries a coating that substantially prevents non-scattered light from reaching the second fiber. The probe is placed in a region where the presence and concentration of an analyte of interest are to be detected, and a sample is admitted into the chamber. Exciting light is transmitted into the sample chamber by the first fiber, where the light interacts with the sample to produce Raman-scattered light. At least some of the Raman- scattered light is received by the second fiber and transmitted to the detector for analysis. Two Raman spectra are measured, at different pressures. The first spectrum is subtracted from the second to remove background effects, and the resulting sample Raman spectrum is compared to a set of stored library spectra to determine the presence and concentration of the analyte.

Nave, S.E.; Livingston, R.R.; Prather, W.S.

1993-01-01T23:59:59.000Z

176

Optical probe for the cytochrome P-450 cholesterol side chain cleavage enzyme  

DOE Patents [OSTI]

An optical probe enables the study of enzyme activity by absorbance spectroscopy or by sensitive fluorescence methods. In particular, the probe provides the ability to monitor the activity of cytochrome P-450.sub.scc enzyme, the rate limiting enzyme for steroid biosynthesis. Located on the inner mitochondrial membrane, P-450.sub.scc catalyzes the conversion of cholesterol to pregnenolone and isocapraldehyde by sequential oxidations of the cholesterol side chain. The fluorogenic probe includes a cholesterol-like steroid linked to a chromophore through a linking group. The chromophore is selected to have little optical response when linked to the steroid substrate and an enhanced optical response when cleaved from the substrate and linking group. Thus, a fluorescent anion that can be optically detected is generated by the side-chain cleavage reaction during steroidogenesis.

Marrone, Babetta L. (Los Alamos, NM); Simpson, Daniel J. (Los Alamos, NM); Unkefer, Clifford J. (Los Alamos, NM); Whaley, Thomas W. (Santa Fe, NM)

1992-01-01T23:59:59.000Z

177

Optical probe for the cytochrome P-450 cholesterol side chain cleavage enzyme  

DOE Patents [OSTI]

An optical probe enables the study of enzyme activity by absorbance spectroscopy or by sensitive fluorescence methods. In particular, the probe provides the ability to monitor the activity of cytochrome P-450.sub.scc enzyme, the rate limiting enzyme for steroid biosynthesis. Located on the inner mitochondrial membrane, P-450.sub.scc catalyzes the conversion of cholesterol to pregnenolone and isocapraldehyde by sequential oxidations of the cholesterol side chain. The fluorogenic probe includes a cholesterol-like steroid linked to a chromophore through a linking group. The chromophore is selected to have little optical response when linked to the steroid substrate and an enhanced optical response when cleaved from the substrate and linking group. Thus, a fluorescent anion that can be optically detected is generated by the side-chain cleavage reaction during steroidogenesis.

Marrone, Babetta L. (Los Alamos, NM); Simpson, Daniel J. (Los Alamos, NM); Unkefer, Clifford J. (Los Alamos, NM); Whaley, Thomas W. (Santa Fe, NM)

1993-01-01T23:59:59.000Z

178

Evaluation of probes used to detect alpha radiation  

E-Print Network [OSTI]

such probes were evaluated in this study, the 350A Alpha Probe of Dosimeter Corporation and the AB100 Scintillator Probe produced by Harshaw Bicron. As an additional comparison, a Ludlum Model 44-9 (Pancake) GM Probe was also evaluated, since it has served...

Sackett, Gregory Duane

1995-01-01T23:59:59.000Z

179

C-C Activation in Biphenylene. Synthesis, Structure, and Reactivity of (C5Me5)2M2(2,2-biphenyl) (M ) Rh, Co)  

E-Print Network [OSTI]

of Chemistry, University of Rochester, Rochester, New York 14627 Received December 17, 1996X Carbon-carbon bond remains an elusive target in organometallic chemistry. A few examples have appeared over the past 20 years by sublimation before use. The reaction of 1 with biphenylene was examined in n-octane-d18.11 Biphenylene reacts

Jones, William D.

180

Mach flow angularity probes for scramjet engine flow path diagnostics  

SciTech Connect (OSTI)

Mach-flow angularity (MFA) probes were developed for use in scramjet flow path probe rakes. Prototype probes were fabricated to demonstrate the assembly processes (numerical control machining, furnace brazing, and electron beam welding). Tests of prototype probes confirmed the thermal durability margins and life cycle. Selected probes were calibrated in air at Mach numbers from 1.75 to 6.0. Acceptance criteria for the production probes stressed thermal durability and pressure (and, consequently, Mach number) measurement quality. This new water-cooled MFA probe has 0.397-cm shaft diameter and is capable of withstanding heat fluxes of 2.724 kW/sq cm.

Jalbert, P.A.; Hiers, R.S. Jr. [Sverdrup Technology, Inc., Arnold AFS, TN (United States)

1993-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Cell diameter measurements obtained with a handheld cell counter could be used as a surrogate marker of G2/M arrest and apoptosis in colon cancer cell lines exposed to SN-38  

SciTech Connect (OSTI)

Highlights: •Chemo-sensitivity to SN-38 was assayed by the automated cell counter. •Colon cancer cell line, HCT116 cells were more sensitive to SN-38 than HT29 cells. •Increase of cell size reflects G2/M arrest. •Appearance of small particles indicates cell apoptosis. -- Abstract: In vitro assessment of chemosensitivity are important for experiments evaluating cancer therapies. The Scepter 2.0 cell counter, an automated handheld device based on the Coulter principle of impedance-based particle detection, enables the accurate discrimination of cell populations according to cell size and volume. In this study, the effects of SN-38, the active metabolite of irinotecan, on the colon cancer cell lines HCT116 and HT29 were evaluated using this device. The cell count data obtained with the Scepter counter were compared with those obtained with the {sup 3}H-thymidine uptake assay, which has been used to measure cell proliferation in many previous studies. In addition, we examined whether the changes in the size distributions of these cells reflected alterations in the frequency of cell cycle arrest and/or apoptosis induced by SN-38 treatment. In our experiments using the Scepter 2.0 cell counter, the cell counts were demonstrated to be accurate and reproducible measure and alterations of cell diameter reflected G2/M cell cycle arrest and apoptosis. Our data show that easy-to-use cell counting tools can be utilized to evaluate the cell-killing effects of novel treatments on cancer cells in vitro.

Tahara, Makiko [Oncogene Research Unit/Cancer Prevention Unit, Tochigi Cancer Center Research Institute, Utsunomiya, Tochigi (Japan) [Oncogene Research Unit/Cancer Prevention Unit, Tochigi Cancer Center Research Institute, Utsunomiya, Tochigi (Japan); Department of Gastrointestinal Surgery, Jichi Medical University, Shimotsuke, Tochigi (Japan); Inoue, Takeshi [Oncogene Research Unit/Cancer Prevention Unit, Tochigi Cancer Center Research Institute, Utsunomiya, Tochigi (Japan)] [Oncogene Research Unit/Cancer Prevention Unit, Tochigi Cancer Center Research Institute, Utsunomiya, Tochigi (Japan); Miyakura, Yasuyuki; Horie, Hisanaga; Yasuda, Yoshikazu [Department of Gastrointestinal Surgery, Jichi Medical University, Shimotsuke, Tochigi (Japan)] [Department of Gastrointestinal Surgery, Jichi Medical University, Shimotsuke, Tochigi (Japan); Fujii, Hirofumi [Division of Clinical Oncology, Jichi Medical University, Shimotsuke, Tochigi (Japan)] [Division of Clinical Oncology, Jichi Medical University, Shimotsuke, Tochigi (Japan); Kotake, Kenjiro [Department of Surgery, Tochigi Cancer Center, Utsunomiya, Tochigi (Japan)] [Department of Surgery, Tochigi Cancer Center, Utsunomiya, Tochigi (Japan); Sugano, Kokichi, E-mail: ksugano@tcc.pref.tochigi.lg.jp [Oncogene Research Unit/Cancer Prevention Unit, Tochigi Cancer Center Research Institute, Utsunomiya, Tochigi (Japan)] [Oncogene Research Unit/Cancer Prevention Unit, Tochigi Cancer Center Research Institute, Utsunomiya, Tochigi (Japan)

2013-05-17T23:59:59.000Z

182

Reverse Optical Probing (ROPING) of Neocortical Circuits  

E-Print Network [OSTI]

(3 mM MgSO4, 1 mM CaCl2), and allowed to equilibrate to room temperature. Whole-cell recordings in V1 conventional ACSF (1 mM MgSO4, 2 mM CaCl2, 3 mM KCl) with Axopatch 200B (Axon Instruments) and a BVC-700 (Dagan

Columbia University

183

Corrosion monitoring with hydrogen probes in the oilfield  

SciTech Connect (OSTI)

An overview of the application of hydrogen probes for corrosion monitoring in the oilfield is presented. The three basic types of hydrogen probes are described and their relative merits discussed. The construction and installation of a simple and inexpensive electrochemical hydrogen probe is described. Experiences with hydrogen probes in oilfield operations are discussed, and it is concluded from these experiences that production systems where hydrogen probes can provide useful corrosion data are limited.

Thomason, W.H.

1984-05-01T23:59:59.000Z

184

A SAURON STUDYOF STARS ANDGAS IN SABULGES J. FalconBarroso 1# , R. Bacon 2 , M. Bureau 3 , M. Cappellari 1 , R. L. Davies 3 ,  

E-Print Network [OSTI]

A SAURON STUDYOF STARS ANDGAS IN SABULGES J. Falcon­Barroso 1# , R. Bacon 2 , M. Bureau 3 , M. 1996, Falcon­Barroso et al. 2002). A comprehensive description of the stellar and gas kinematics of the complete sample of 24 Sa spiral bulges is presented in Falcon­Barroso et al. (2005). We highlight some

Bureau, Martin

185

Development of Volume Phase Holographic (VPH) Grism for Visible to Near Infrared Instruments of the 8.2m Subaru Telescope  

E-Print Network [OSTI]

@riken.go.jp; http://atlas.riken.go.jp/~ebizuka/ebi-e.html; http://atlas.riken.go.jp/~ebizuka/ebi.html (Japanese (FOCAS) is one of its seven common-use facility instruments of the 8.2m Subaru Telescope on Mauna Kea

Iye, Masanori

186

FLOW SOURCES AND FORMATION LAWS OF SOLAR WIND N. A. LOTOVA1, V. N. OBRIDKO1, K. V. VLADIMIRSKII2, M. K. BIRD3 and  

E-Print Network [OSTI]

FLOW SOURCES AND FORMATION LAWS OF SOLAR WIND STREAMS N. A. LOTOVA1, V. N. OBRIDKO1, K. V. VLADIMIRSKII2, M. K. BIRD3 and P. JANARDHAN3, 1IZMIRAN, Troitsk, Moscow Region, 142190, Russia (e-mail: nlotova structure of the solar wind flow is studied in the main acceleration zone from 10 to 40 solar radii from

Padmanabhan, Janardhan

187

Fireside corrosion probes--an update  

SciTech Connect (OSTI)

The ability to monitor the corrosion degradation of key metallic components in fossil fuel power plants will become increasingly important for FutureGen and ultra-supercritical power plants. A number of factors (ash deposition, coal composition changes, thermal gradients, and low NOx conditions, among others) which occur in the high temperature sections of energy production facilities, will contribute to fireside corrosion. Several years of research have shown that high temperature corrosion rate probes need to be better understood before corrosion rate can be used as a process variable by power plant operators. Our recent research has shown that electrochemical corrosion probes typically measure lower corrosion rates than those measured by standard mass loss techniques. While still useful for monitoring changes in corrosion rates, absolute probe corrosion rates will need a calibration factor to be useful. Continuing research is targeted to help resolve these issues.

Covino, B.S., Jr.; Bullard, S.J.; Holcomb, G.R.; Ziomek-Moroz, M.; Matthes, S.A.

2007-01-01T23:59:59.000Z

188

Gamma-ray blind beta particle probe  

DOE Patents [OSTI]

An intra-operative beta particle probe is provided by placing a suitable photomultiplier tube (PMT), micro channel plate (MCP) or other electron multiplier device within a vacuum housing equipped with: 1) an appropriate beta particle permeable window; and 2) electron detection circuitry. Beta particles emitted in the immediate vicinity of the probe window will be received by the electron multiplier device and amplified to produce a detectable signal. Such a device is useful as a gamma insensitive, intra-operative, beta particle probe in surgeries where the patient has been injected with a beta emitting radiopharmaceutical. The method of use of such a device is also described, as is a position sensitive such device.

Weisenberger, Andrew G. (Grafton, VA)

2001-01-01T23:59:59.000Z

189

Remote adjustable focus Raman spectroscopy probe  

DOE Patents [OSTI]

A remote adjustable focus Raman spectroscopy probe allows for analyzing Raman scattered light from a point of interest external probe. An environmental barrier including at least one window separates the probe from the point of interest. An optical tube is disposed adjacent to the environmental barrier and includes a long working length compound lens objective next to the window. A beam splitter and a mirror are at the other end. A mechanical means is used to translated the prove body in the X, Y, and Z directions resulting in a variable focus optical apparatus. Laser light is reflected by the beam splitter and directed toward the compound lens objective, then through the window and focused on the point of interest. Raman scattered light is then collected by the compound lens objective and directed through the beam splitter to a mirror. A device for analyzing the light, such as a monochrometer, is coupled to the mirror.

Schmucker, John E. (Hurt, VA); Blasi, Raymond J. (Harrison City, PA); Archer, William B. (Bethel Park, PA)

1999-01-01T23:59:59.000Z

190

Method and apparatus for synthesis of arrays of DNA probes  

DOE Patents [OSTI]

The synthesis of arrays of DNA probes sequences, polypeptides, and the like is carried out using a patterning process on an active surface of a substrate. An image is projected onto the active surface of the substrate utilizing an image former that includes a light source that provides light to a micromirror device comprising an array of electronically addressable micromirrors, each of which can be selectively tilted between one of at least two positions. Projection optics receives the light reflected from the micromirrors along an optical axis and precisely images the micromirrors onto the active surface of the substrate, which may be used to activate the surface of the substrate. The first level of bases may then be applied to the substrate, followed by development steps, and subsequent exposure of the substrate utilizing a different pattern of micromirrors, with further repeats until the elements of a two dimensional array on the substrate surface have an appropriate base bound thereto. The micromirror array can be controlled in conjunction with a DNA synthesizer supplying appropriate reagents to a flow cell containing the active substrate to control the sequencing of images presented by the micromirror array in coordination of the reagents provided to the substrate.

Cerrina, Francesco (Madison, WI); Sussman, Michael R. (Madison, WI); Blattner, Frederick R. (Madison, WI); Singh-Gasson, Sangeet (Madison, WI); Green, Roland (Madison, WI)

2002-04-23T23:59:59.000Z

191

Probe and method for DNA detection  

DOE Patents [OSTI]

A hybridization probe containing two linear strands of DNA lights up upon hybridization to a target DNA using silver nanoclusters that have been templated onto one of the DNA strands. Hybridization induces proximity between the nanoclusters on one strand and an overhang on the other strand, which results in enhanced fluorescence emission from the nanoclusters.

Yeh, Hsin-Chih; Werner, James Henry; Sharma, Jaswinder Kumar; Martinez, Jennifer Suzanne

2013-07-02T23:59:59.000Z

192

Probe Measurements of Electrostatic Fluctuations in LDX  

E-Print Network [OSTI]

-axis ­ Motor positioning controlled with PLC · VERTICAL PROBES: ­ -pos: one - two meters off mid-plane ­ -pos density. Density(cm-3 ) 0.00118 0.0000 PlasmaFlux (Tesla/sec) 1010 109 #12;7 Electric Fluctuations

193

Astrophysikalisches Institut Potsdam Probes of Dark Energy  

E-Print Network [OSTI]

Astrophysikalisches Institut Potsdam Probes of Dark Energy using Cosmological Simulations Nonlinear component, called dark energy. This unknown energy causes the expansion of the universe to accelerate theoretical model of dark energy has been developed. Instead a number of models have been proposed that range

194

High temperature electrochemical corrosion rate probes  

SciTech Connect (OSTI)

Corrosion occurs in the high temperature sections of energy production plants due to a number of factors: ash deposition, coal composition, thermal gradients, and low NOx conditions, among others. Electrochemical corrosion rate (ECR) probes have been shown to operate in high temperature gaseous environments that are similar to those found in fossil fuel combustors. ECR probes are rarely used in energy production plants at the present time, but if they were more fully understood, corrosion could become a process variable at the control of plant operators. Research is being conducted to understand the nature of these probes. Factors being considered are values selected for the Stern-Geary constant, the effect of internal corrosion, and the presence of conductive corrosion scales and ash deposits. The nature of ECR probes will be explored in a number of different atmospheres and with different electrolytes (ash and corrosion product). Corrosion rates measured using an electrochemical multi-technique capabilities instrument will be compared to those measured using the linear polarization resistance (LPR) technique. In future experiments, electrochemical corrosion rates will be compared to penetration corrosion rates determined using optical profilometry measurements.

Bullard, Sophie J.; Covino, Bernard S., Jr.; Holcomb, Gordon R.; Ziomek-Moroz, M.

2005-09-01T23:59:59.000Z

195

Gamma Ray Bursts as Probes of the First Stars  

E-Print Network [OSTI]

The redshift where the first stars formed is an important and unknown milestone in cosmological structure formation. The evidence linking gamma ray bursts (GRBs) with star formation activity implies that the first GRBs occurred shortly after the first stars formed. Gamma ray bursts and their afterglows may thus offer a unique probe of this epoch, because they are bright from gamma ray to radio wavelengths and should be observable to very high redshift. Indeed, our ongoing near-IR followup programs already have the potential to detect bursts at redshift z ~ 10. In these proceedings, we discuss two distinct ways of using GRBs to probe the earliest star formation. First, direct GRB counts may be used as a proxy for star formation rate measurements. Second, high energy cutoffs in the GeV spectra of gamma ray bursts due to pair production with high redshift optical and ultraviolet background photons contain information on early star formation history. The second method is observationally more demanding, but also more rewarding, because each observed pair creation cutoff in a high redshift GRB spectrum will tell us about the integrated star formation history prior to the GRB redshift.

James E. Rhoads

2001-11-01T23:59:59.000Z

196

ELECTROSTATIC PROBE DIAGNOSTICS ON THE LBL 10 AMPERE NEUTRAL BEAM ION SOURCE  

E-Print Network [OSTI]

Probes," in Plasma Diagnostics (Lochte- Holtgreven, eds. ),Electric Probes," in Plasma Diagnostic Techniques (R. H.Spatial probe diagnostics schematic. Radial plasma profile:

Schoenberg, Kurt F.

2011-01-01T23:59:59.000Z

197

Semiconductor nanocrystal probes for biological applications and process for making and using such probes  

DOE Patents [OSTI]

A semiconductor nanocrystal compound and probe are described. The compound is capable of linking to one or more affinity molecules. The compound comprises (1) one or more semiconductor nanocrystals capable of, in response to exposure to a first energy, providing a second energy, and (2) one or more linking agents, having a first portion linked to the one or more semiconductor nanocrystals and a second portion capable of linking to one or more affinity molecules. One or more semiconductor nanocrystal compounds are linked to one or more affinity molecules to form a semiconductor nanocrystal probe capable of bonding with one or more detectable substances in a material being analyzed, and capable of, in response to exposure to a first energy, providing a second energy. Also described are processes for respectively: making the semiconductor nanocrystal compound; making the semiconductor nanocrystal probe; and treating materials with the probe.

Weiss, Shimon; Bruchez, Marcel; Alivisatos, Paul

2014-01-28T23:59:59.000Z

198

Semiconductor nanocrystal probes for biological applications and process for making and using such probes  

DOE Patents [OSTI]

A semiconductor nanocrystal compound and probe are described. The compound is capable of linking to one or more affinity molecules. The compound comprises (1) one or more semiconductor nanocrystals capable of, in response to exposure to a first energy, providing a second energy, and (2) one or more linking agents, having a first portion linked to the one or more semiconductor nanocrystals and a second portion capable of linking to one or more affinity molecules. One or more semiconductor nanocrystal compounds are linked to one or more affinity molecules to form a semiconductor nanocrystal probe capable of bonding with one or more detectable substances in a material being analyzed, and capable of, in response to exposure to a first energy, providing a second energy. Also described are processes for respectively: making the semiconductor nanocrystal compound; making the semiconductor nanocrystal probe; and treating materials with the probe.

Weiss, Shimon; Bruchez, Marcel; Alivisatos, Paul

2012-10-16T23:59:59.000Z

199

Lens-array PDV Probe Using a Pyramid Prism  

SciTech Connect (OSTI)

A bug eye probe is shown using a pyramid prism, and its advantages and disadvantages are enumerated. Also shown is abug eye imaging probe, with its advantages and disadvantages enumerated.

Malone, R. M., Kaufman, M. I., Cox, B., Romero, V., Cata B., Sorenson, D. Pazuchanics, P.

2011-11-01T23:59:59.000Z

200

acceleration probe studying: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

23 24 25 Next Page Last Page Topic Index 1 Supernova Acceleration Probe: Studying Dark Energy with Type Ia Supernovae Astrophysics (arXiv) Summary: The Supernova Acceleration Probe...

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Steady and unsteady calibration of multi-hole probes  

E-Print Network [OSTI]

This thesis presents the development of a data crographics. reduction algorithm for multi-hole pressure probes. The algorithm has been developed for the reduction of calibration data from miniature non-nulling multi-hole probes in compressible...

Johansen, Espen S

1998-01-01T23:59:59.000Z

202

Can a Pump-probe Experiment be Simulated Efficiently?  

E-Print Network [OSTI]

Can a Pump-probe Experiment be Simulated Efficiently? Thesis Submitted for the Degree Doctor things in the world. #12;i ABSTRACT Measuring a quantum system disturbs its evolution. A pump-probe exper measurements. Modeling the evolution of observables in the pump-probe experiment is an essential ingredient

Kosloff, Ronnie

203

Nuclear structure studies with medium energy probes. [Northwestern Univ  

SciTech Connect (OSTI)

Progress in the continuing program of experimental research in nuclear structure with medium-energy probes during the year 1979-1980 is reviewed, and the research activities planned for the year 1980-1981 are discussed. In the study of pion-induced reactions emphasis is placed on investigation of isovector characteristics of nuclear excitations and on double charge exchange reactions. Pion production studies form the major part of the program of experiments with proton beams of 400 to 800 MeV at LAMPF. Current emphasis is on the bearing of these investigations on di-baryon existence. The study of high-spin states and magnetic scattering constitute the main goals of the electron scattering program at Bates. Representative results are presented; completed work is reported in the usual publications. (RWR)

Seth, Kamal K.

1980-01-01T23:59:59.000Z

204

Protein structure and hydration probed by SANS and osmotic stress  

SciTech Connect (OSTI)

Interactions governing protein folding, stability, recognition, and activity are mediated by hydration. Here, we use small-angle neutron scattering coupled with osmotic stress to investigate the hydration of two proteins, lysozyme and guanylate kinase (GK), in the presence of solutes. By taking advantage of the neutron contrast variation that occurs upon addition of these solutes, the number of protein-associated (solute-excluded) water molecules can be estimated from changes in both the zero-angle scattering intensity and the radius of gyration. Poly(ethylene glycol) exclusion varies with molecular weight. This sensitivity can be exploited to probe structural features such as the large internal GK cavity. For GK, small-angle neutron scattering is complemented by isothermal titration calorimetry with osmoticstress to also measure hydration changes accompanying ligand binding. These results provide a framework for studying other biomolecular systems and assemblies using neutron scattering together with osmotic stress.

Rau, Dr. Donald [National Institutes of Health

2008-01-01T23:59:59.000Z

205

Site tests validate benefits of cavern probes  

SciTech Connect (OSTI)

More than 5 years` experience with downhole probes has allowed TransGas Ltd., Regina, to monitor and evaluate cavern integrity. The devices access natural-gas storage caverns` pressures and temperatures. Acquired data have helped determine gas-in-place inventory volumes, confirm spatial volumes, and assess changes in spatial volumes that may have resulted from cavern creep (shrinkage or closure) or downhole abnormality such as fluid infill or collapse of the side walls or roof areas. This conclusion of two articles presents details and results of a specific storage-site. The first article presented background and many of the details and lessons of TransGas` cavern gas-storage probe program.

Crossley, N.G. [TransGas Ltd., Regina, Saskatchewan (Canada)

1997-03-10T23:59:59.000Z

206

Non-Contact Gaging with Laser Probe  

SciTech Connect (OSTI)

A gage has been constructed using conventional (high end) components for the application of measuring fragile syntactic foam parts in a non-contact mode. Success with this approach has been achieved through a novel method of transferring (mapping) high accuracy local measurements of a coated aluminum master, taken on a Leitz Coordinate Measurement Machine (CMM), to the gage software system. The mapped data is then associated with local voltage readings from two (inner and outer) laser triangulating probes. This couples discreet laser probe offset and linearity characteristics to the measured master geometry. The gage software compares real part measured data against the master data to provide non-contact part inspection that results in a high accuracy and low uncertainty performance. Uncertainty from the part surface becomes the prevailing contributor to the gaging process. The gaging process provides a high speed, hands off measurement with nearly zero impedance.

Clinesmith, Mike

2009-03-20T23:59:59.000Z

207

Probing Nano-Mechanical QED Effects  

E-Print Network [OSTI]

We propose and study an "intrinsic probing" approach, without introducing any external detector, to mimic cavity QED effects in a qubit-nanomechanical resonator system. This metallic nanomechanical resonator can act as an intrinsic detector when a weak driving current passes through it. The nanomechanical resonator acts as both the cavity and the detector. A cavity QED-like effect is demonstrated by the correlation spectrum of the electromotive force between the two ends of the nanomechanical resonator. Using the quantum regression theorem and perturbation theory, we analytically calculate the correlation spectrum. In the weak driving limit, we study the effect on the vacuum Rabi splitting of both the strength of the driving as well as the frequency-detuning between the charge qubit and the nanomechanical resonator. Numerical calculations confirm the validity of our intrinsic probing approach.

Y. B. Gao; S. Yang; Yu-xi Liu; C. P. Sun; Franco Nori

2009-02-15T23:59:59.000Z

208

Probe for EPMA v. 10.3.5 User's Guide and Reference  

E-Print Network [OSTI]

Database for Data Integrity...........................................................15 History of Probe

209

Fireside corrosion probes for fossil fuel combustion  

SciTech Connect (OSTI)

Electrochemical corrosion rate probes have been constructed and tested along with mass loss coupons in environments consisting of N2/O2/CO2/SO2 plus water vapor. Temperatures ranged from 450° to 700°C. Results show that electrochemical corrosion rates for ash-covered mild steel are a function of time, temperature, and gaseous environment. Correlation between the electrochemical and mass loss corrosion rates was poor.

Covino, B.S., Jr.; Bullard, S.J.; Ziomek-Moroz, M.; Holcomb, G.R.; Eden, D.A. (Intercorr International, Houston, TX)

2006-03-01T23:59:59.000Z

210

Use of a fiber optic probe for organic species determination  

DOE Patents [OSTI]

A fiber optic probe for remotely detecting the presence and concentration organic species in aqueous solutions. The probe includes a cylindrical housing with an organic species indicator, preferably diaminonaphthyl sulfonic acid adsorbed in a silica gel (DANS-modified gel), contained in the probe's distal end. The probe admits aqueous solutions to the probe interior for mixing within the DANS-modified gel. An optical fiber transmits light through the DANS-modified gel while the indicator reacts with organic species present in the solution, thereby shifting the location of the fluorescent peak. The altered light is reflected to a receiving fiber that carries the light to a spectrophotometer or other analysis device.

Ekechukwu, Amy A. (Augusta, GA)

1996-01-01T23:59:59.000Z

211

Dielectric covered hairpin probe for its application in reactive plasmas  

SciTech Connect (OSTI)

The hairpin probe is a well known technique for measuring local electron density in low temperature plasmas. In reactive plasmas, the probe characteristics are affected by surface sputtering, contamination, and secondary electron emission. At higher densities, the plasma absorbs the entire electromagnetic energy of hairpin and hence limits the density measurements. These issues can be resolved by covering the hairpin surface with a thin layer of dielectric. In this letter, the dielectric contribution to the probe characteristics is incorporated in a theory which is experimentally verified. The dielectric covering improves the performance of probe and also allows the hairpin tip to survive in reactive plasma where classical electrical probes are easily damaged.

Gogna, G. S.; Gaman, C.; Turner, M. M. [NCPST, School of Physical Sciences, Dublin City University, Dublin 9 (Ireland); Karkari, S. K. [Institute for Plasma Research Center, Bhat Gandhinagar, Gujarat 382428 (India)

2012-07-23T23:59:59.000Z

212

Design and analysis of mismatch probes for long oligonucleotide microarrays  

SciTech Connect (OSTI)

Nonspecific hybridization is currently a major concern with microarray technology. One of most effective approaches to estimating nonspecific hybridizations in oligonucleotide microarrays is the utilization of mismatch probes; however, this approach has not been used for longer oligonucleotide probes. Here, an oligonucleotide microarray was constructed to evaluate and optimize parameters for 50-mer mismatch probe design. A perfect match (PM) and 28 mismatch (MM) probes were designed for each of ten target genes selected from three microorganisms. The microarrays were hybridized with synthesized complementary oligonucleotide targets at different temperatures (e.g., 42, 45 and 50 C). In general, the probes with evenly distributed mismatches were more distinguishable than those with randomly distributed mismatches. MM probes with 3, 4 and 5 mismatched nucleotides were differentiated for 50-mer oligonucleotide probes hybridized at 50, 45 and 42 C, respectively. Based on the experimental data generated from this study, a modified positional dependent nearest neighbor (MPDNN) model was constructed to adjust the thermodynamic parameters of matched and mismatched dimer nucleotides in the microarray environment. The MM probes with four flexible positional mismatches were designed using the newly established MPDNN model and the experimental results demonstrated that the redesigned MM probes could yield more consistent hybridizations. Conclusions: This study provides guidance on the design of MM probes for long oligonucleotides (e.g., 50 mers). The novel MPDNN model has improved the consistency for long MM probes, and this modeling method can potentially be used for the prediction of oligonucleotide microarray hybridizations.

Deng, Ye; He, Zhili; Van Nostrand, Joy D.; Zhou, Jizhong

2008-08-15T23:59:59.000Z

213

Cone penetrometer fiber optic raman spectroscopy probe assembly  

DOE Patents [OSTI]

A chemically and mechanically robust optical Raman spectroscopy probe assembly that can be incorporated in a cone penetrometer (CPT) for subsurface deployment. This assembly consists of an optical Raman probe and a penetrometer compatible optical probe housing. The probe is intended for in-situ chemical analysis of chemical constituents in the surrounding environment. The probe is optically linked via fiber optics to the light source and the detection system at the surface. A built-in broadband light source provides a strobe method for direct measurement of sample optical density. A mechanically stable sapphire window is sealed directly into the side-wall of the housing using a metallic, chemically resistant, hermetic seal design. This window permits transmission of the interrogation light beam and the resultant signal. The spectroscopy probe assembly is capable of accepting Raman, Laser induced Fluorescence, reflectance, and other optical probes with collimated output for CPT deployment.

Kyle, Kevin R. (Brentwood, CA); Brown, Steven B. (Livermore, CA)

2000-01-01T23:59:59.000Z

214

Sampling probe for microarray read out using electrospray mass spectrometry  

DOE Patents [OSTI]

An automated electrospray based sampling system and method for analysis obtains samples from surface array spots having analytes. The system includes at least one probe, the probe including an inlet for flowing at least one eluting solvent to respective ones of a plurality of spots and an outlet for directing the analyte away from the spots. An automatic positioning system is provided for translating the probe relative to the spots to permit sampling of any spot. An electrospray ion source having an input fluidicly connected to the probe receives the analyte and generates ions from the analyte. The ion source provides the generated ions to a structure for analysis to identify the analyte, preferably being a mass spectrometer. The probe can be a surface contact probe, where the probe forms an enclosing seal along the periphery of the array spot surface.

Van Berkel, Gary J.

2004-10-12T23:59:59.000Z

215

electric Probe Applications Laboratory, Hanyang University DiPS (Diversified Plasma Simulator)  

E-Print Network [OSTI]

electric Probe Applications Laboratory, Hanyang University DiPS (Diversified Plasma Simulator Science, Toki, Gifu, Japan Kyu-Sun Chung and ePALers* Hanyang University, Seoul, Korea #12;electric Probe and processing plasmas with various electric probes: fast-scanning single probe, triple probe, Mach probe, slow

Princeton Plasma Physics Laboratory

216

High-Throughput Mode Liquid Microjunction Surface Sampling Probe  

SciTech Connect (OSTI)

A simple and automated spot sampling operation mode for a liquid microjunction surface sampling probe/electrospray ionization mass spectrometry (LMJ-SSP/ESI-MS) system is reported. Prior manual and automated spot sampling methods with this probe relied on a careful, relatively slow alignment of the probe and surface distance (<20 m spacing) to form the probe-to-surface liquid microjunction critical to successful surface sampling. Moreover, sampling multiple spots required retraction of the surface from the probe and a repeat of this careful probe-to-surface distance alignment at the next sampling position. With the method described here, the probe was not positioned as close to the surface, the exact probeto-surface positioning was found to be less critical (spanning distances from about 100-300 m), and this distance was not altered during the sampling of an entire array of sample spots. With the probe positioned within the appropriate distance from the surface, the liquid microjunction was formed by letting the liquid from the sampling end of the probe extend out from the probe to the surface. This was accomplished by reducing the selfaspiration liquid flow rate of the probe to a value less than the volume flow rate pumped into the probe. When the self-aspiration rate of the probe was subsequently increased, analytes on the surface that dissolved at the liquid microjunction were aspirated back into the probe with the liquid that created the liquid microjunction and electrosprayed. Presented here are the basics of this new sampling mode, as well as data that illustrate the potential analytical capabilities of the device to conduct highthroughput quantitative analysis.

Van Berkel, Gary J [ORNL; Kertesz, Vilmos [ORNL; King, Richard C. [PharmaCadence

2009-01-01T23:59:59.000Z

217

Nondegenerate parametric generation of 2.2-mJ, few-cycle 2.05-?m pulses using a mixed phase matching scheme  

SciTech Connect (OSTI)

We describe the production of 2.2-mJ, ?6 optical-cycle-long mid-infrared laser pulses with a carrier wavelength of 2.05 ?m in a two-stage ?-BaB{sub 2}O{sub 4} nondegenerate optical parametric amplifier design with a mixed phase matching scheme, which is pumped by a standard Ti:sapphire chirped-pulse amplification system. It is demonstrated that relatively high pulse energies, short pulse durations, high stability, and excellent beam profiles can be obtained using this simple approach, even without the use of optical parametric chirped-pulse amplification.

Xu, Guibao; Wandel, Scott F.; Jovanovic, Igor, E-mail: ijovanovic@psu.edu [Department of Mechanical and Nuclear Engineering, The Pennsylvania State University, University Park, Pennsylvania 16802 (United States)] [Department of Mechanical and Nuclear Engineering, The Pennsylvania State University, University Park, Pennsylvania 16802 (United States)

2014-02-15T23:59:59.000Z

218

Ballistic performance comparison of monolayer transition metal dichalcogenide MX{sub 2} (M = Mo, W; X = S, Se, Te) metal-oxide-semiconductor field effect transistors  

SciTech Connect (OSTI)

We study the transport properties of monolayer MX{sub 2} (M?=?Mo, W; X?=?S, Se, Te) n- and p-channel metal-oxide-semiconductor field effect transistors (MOSFETs) using full-band ballistic non-equilibrium Green's function simulations with an atomistic tight-binding Hamiltonian with hopping potentials obtained from density functional theory. We discuss the subthreshold slope, drain-induced barrier lowering (DIBL), as well as gate-induced drain leakage (GIDL) for different monolayer MX{sub 2} MOSFETs. We also report the possibility of negative differential resistance behavior in the output characteristics of nanoscale monolayer MX{sub 2} MOSFETs.

Chang, Jiwon; Register, Leonard F.; Banerjee, Sanjay K. [Microelectronics Research Center, The University of Texas at Austin, Austin, Texas 78758 (United States)

2014-02-28T23:59:59.000Z

219

Use of Ultrafast Dispersed Pump-Dump-Probe and Pump-Repump-Probe Spectroscopies to Explore the Light-Induced Dynamics of Peridinin in Solution  

E-Print Network [OSTI]

Use of Ultrafast Dispersed Pump-Dump-Probe and Pump-Repump-Probe Spectroscopies to Explore Form: NoVember 14, 2005 Optical pump-induced dynamics of the highly asymmetric carotenoid peridinin in methanol was studied by dispersed pump-probe, pump-dump-probe, and pump-repump-probe transient absorption

van Stokkum, Ivo

220

Visual probes and methods for placing visual probes into subsurface areas  

DOE Patents [OSTI]

Visual probes and methods for placing visual probes into subsurface areas in either contaminated or non-contaminated sites are described. In one implementation, the method includes driving at least a portion of a visual probe into the ground using direct push, sonic drilling, or a combination of direct push and sonic drilling. Such is accomplished without providing an open pathway for contaminants or fugitive gases to reach the surface. According to one implementation, the invention includes an entry segment configured for insertion into the ground or through difficult materials (e.g., concrete, steel, asphalt, metals, or items associated with waste), at least one extension segment configured to selectively couple with the entry segment, at least one push rod, and a pressure cap. Additional implementations are contemplated.

Clark, Don T.; Erickson, Eugene E.; Casper, William L.; Everett, David M.

2004-11-23T23:59:59.000Z

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Energy transfer characteristics of silicate glass doped with Er{sup 3+}, Tm{sup 3+}, and Ho{sup 3+} for ?2 ?m emission  

SciTech Connect (OSTI)

A Er{sup 3+}/Tm{sup 3+}/Ho{sup 3+} tri-doped silicate glass with good thermal stability is prepared by melt-quenching method. Efficient ?2 ?m emission is observed under 808 nm laser excitation. It is found that the 2.0 ?m emission of Ho{sup 3+} can be enhanced under the excitation at 808 nm by incorporating Er{sup 3+} and Tm{sup 3+}. Based on the measurement of absorption spectra, the Judd–Ofelt intensity parameters, radiation emission probability, and branching ratio are calculated to evaluate the spectroscopic properties simultaneously. The maximum value of emission cross section of Ho{sup 3+} is 3.54 × 10{sup ?21} cm{sup 2} at 2008 nm. Additionally, the phonon assistance and the micro-parameters in the energy transfer process are quantitatively analyzed by using Dexter model. The energy transfer coefficient from Tm{sup 3+} to Ho{sup 3+} can reach as high as 21.44 × 10{sup ?40} cm{sup 6}/s, respectively. The emission property together with good thermal property indicates that Er{sup 3+}/Tm{sup 3+}/Ho{sup 3+} tri-doped silicate glass is a potential kind of laser glass for efficient 2 ?m laser.

Li, Ming; Liu, Xueqiang [Key Laboratory of Materials for High Power Laser, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800 (China) [Key Laboratory of Materials for High Power Laser, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800 (China); Graduate School of Chinese Academy of Sciences, Beijing 100039 (China); Guo, Yanyan [College of Materials Science and Engineering, Changchun University of Science and Technology, Changchun 130022 (China)] [College of Materials Science and Engineering, Changchun University of Science and Technology, Changchun 130022 (China); Hu, Lili [Key Laboratory of Materials for High Power Laser, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800 (China)] [Key Laboratory of Materials for High Power Laser, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800 (China); Zhang, Junjie [College of Materials Science and Engineering, China Jiliang University, Hangzhou 310 018 (China)] [College of Materials Science and Engineering, China Jiliang University, Hangzhou 310 018 (China)

2013-12-28T23:59:59.000Z

222

STUDENT ID Page 2 m  

E-Print Network [OSTI]

Write your name, student ID number, recitation instructor's name and recitation time in the space provided above. Also write your name at the top of pages 2, 3, ...

223

Ionization probes of molecular structure and chemistry  

SciTech Connect (OSTI)

Various photoionization processes provide very sensitive probes for the detection and understanding of the spectra of molecules relevant to combustion processes. The detection of ionization can be selective by using resonant multiphoton ionization or by exploiting the fact that different molecules have different sets of ionization potentials. Therefore, the structure and dynamics of individual molecules can be studied even in a mixed sample. The authors are continuing to develop methods for the selective spectroscopic detection of molecules by ionization, and to use these methods for the study of some molecules of combustion interest.

Johnson, P.M. [State Univ. of New York, Stony Brook (United States)

1993-12-01T23:59:59.000Z

224

Langmuir Probe Measurements in Plasma Shadows  

SciTech Connect (OSTI)

When immersing a target into a plasma streaming along magnetic field lines, a distinct shadow region extending over large distances is observed by the naked eye downstream of the target.In this work we present an experimental study of the effect applying Langmuir probes. In contrast to expectations, there are only marginal changes in the profiles of temperature and density behind masks that cut away about 50% of the plasma cross-section. On the other hand, the mean density is drastically reduced by an order of magnitude. First attempts to simulate the observations by solving the classical 2D diffusion equation were not successful.

Waldmann, O. [Max-Planck-Institut fuer Plasmaphysik, TI Greifswald, Wendelsteinstr. 1, 17491 Greifswald, EURATOM Association (Germany); Koch, B.; Fussmann, G. [Max-Planck-Institut fuer Plasmaphysik, TI Greifswald, Wendelsteinstr. 1, 17491 Greifswald, EURATOM Association (Germany); Humboldt-Universitaet zu Berlin, Institut fuer Physik, PLA, Newtonstr. 15, 12489 Berlin (Germany)

2006-01-15T23:59:59.000Z

225

Probing lepton number violation on three frontiers  

SciTech Connect (OSTI)

Neutrinoless double beta decay constitutes the main probe for lepton number violation at low energies, motivated by the expected Majorana nature of the light but massive neutrinos. On the other hand, the theoretical interpretation of the (non-)observation of this process is not straightforward as the Majorana neutrinos can destructively interfere in their contribution and many other New Physics mechanisms can additionally mediate the process. We here highlight the potential of combining neutrinoless double beta decay with searches for Tritium decay, cosmological observations and LHC physics to improve the quantitative insight into the neutrino properties and to unravel potential sources of lepton number violation.

Deppisch, Frank F. [Department of Physics and Astronomy, University College London (United Kingdom)

2013-12-30T23:59:59.000Z

226

Probes for anionic cell surface detection  

DOE Patents [OSTI]

Embodiments of the present invention are generally directed to compositions comprising a class of molecular probes for detecting the presence of anionic cell surfaces. Embodiments include compositions that are enriched for these compositions and preparations, particularly preparations suitable for use as laboratory/clinical reagents and diagnostic indicators, either alone or as part of a kit. An embodiment of the invention provides for a highly selective agent useful in the discernment and identification of dead or dying cells, such as apoptotic cells, in a relatively calcium-free environment. An embodiment of the invention provides a selective agent for the identification of bacteria in a mixed population of bacterial cells and nonbacterial cells.

Smith, Bradley D.

2013-03-05T23:59:59.000Z

227

Tao Probing the End of the World  

E-Print Network [OSTI]

We introduce a new IIB 5-brane description for the E-string theory which is the world-volume theory on M5-brane probing the end of the world M9-brane. The E- string in the new realization is depicted as spiral 5-branes web equipped with the cyclic structure which is a key to uplifting to 6 dimensions. Utilizing the topological vertex to the 5-brane web configuration enables us to write down a combinatorial formula for the generating function of the E-string elliptic genera, namely the full partition function of topological strings on local 1/2 K3 surface.

Sung-Soo Kim; Masato Taki; Futoshi Yagi

2015-04-14T23:59:59.000Z

228

Scanning Probe AFM Compound Microscope | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmitted for USMaterialstheterahertzon Home WaterScanning Probe AFM

229

Probing Organic Transistors with Infrared Beams  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FORPoints of ContactLiquid Surfaces underProbing

230

Probing Organic Transistors with Infrared Beams  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FORPoints of ContactLiquid SurfacesProbing Organic

231

Probing the Proton's Weak Side | Jefferson Lab  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FORPoints ofProbingDewetting andits Radical

232

Electrochemical corrosion rate probes for high temperature energy applications  

SciTech Connect (OSTI)

Electrochemical corrosion rate (ECR) probes were constructed and exposed along with mass loss coupons in a N2/O2/CO2/H2O environment to determine ECR probe operating characteristics. Temperatures ranged from 450 to 800 C and both ECR probes and mass loss coupons were coated with ash. Results are presented in terms of the probe response to temperature, the measured zero baseline, and the quantitative nature of the probes. The effect of Stern-Geary constant and the choice of electrochemical technique used to measure the corrosion rate are also discussed. ECR probe corrosion rates were a function of time, temperature, and process environment and were found to be quantitative for some test conditions. Measured Stern-Geary constants averaged 0.0141 V/decade and the linear polarization technique was found to be more quantitative than the electrochemical noise technique.

Covino, Bernard S., Jr.; Bullard, Sophie J.; Cramer, Stephen D.; Holcomb, Gordon R.; Ziomek-Moroz, M.; Cayard, M.S. (InterCorr International Inc.); Eden, D.A. (InterCorr International Inc.)

2004-01-01T23:59:59.000Z

233

Electrical probe diagnostics for the laminar flame quenching distance  

SciTech Connect (OSTI)

A simplified theory, previously developed for the general case of weakly ionized gas flow, is used to predict electrical probe response when the flame is quenched on the probe surface. This theory is based on the planar model of space charge sheaths around the measuring electrode. For the flame quenching case, by assuming that the sheath thickness is comparable with the thermal boundary layer thickness, probe current can be related to flame quenching distance. The theoretical assumptions made to obtain the analytical formulation of probe current were experimentally proved by using direct visualization and high-frequency PIV. The direct visualization method was also used to validate the results of flame quenching distance values obtained with electrical probe. The electrical probe diagnostics have been verified for both head-on and sidewall flame quenching regimes and for stoichiometric methane/air and propane/air mixtures in a pressure range of 0.05-0.6 MPa. (author)

Karrer, Maxime; Makarov, Maxime [Renault Technocentre, 78288 Guyancourt Cedex (France); Bellenoue, Marc; Labuda, Sergei; Sotton, Julien [Laboratoire de Combustion et de Detonique, CNRS, 86961 Futuroscope Chasseneuil (France)

2010-02-15T23:59:59.000Z

234

Electromagnetic Probes at RHIC-II  

E-Print Network [OSTI]

We summarize how future measurements of electromagnetic (e.m.) probes at the Relativistic Heavy Ion Collider (RHIC), in connection with theoretical analysis, can advance our understanding of strongly interacting matter at high energy densities and temperatures. After a brief survey of the important role that e.m. probes data have played at the Super Proton Synchrotron (SPS, CERN) and RHIC to date, we identify key physics objectives and observables that remain to be addressed to characterize the (strongly interacting) Quark-Gluon Plasma (sQGP) and associated transition properties at RHIC. These include medium modifications of vector mesons via low-mass dileptons, a temperature measurement of the hot phases via continuum radiation, as well as gamma-gamma correlations to characterize early source sizes. We outline strategies to establish microscopic matter and transition properties such as the number of degrees of freedom in the sQGP, the origin of the hadron masses and manifestations of chiral symmetry restoration, which will require accompanying but rather well-defined advances in theory. Increased experimental precision, order of magnitude higher statistics than currently achievable, as well as a detailed scan of colliding species and energies are then mandatory to achieve sufficient discrimination power in theoretical interpretations. This increased precision can be achieved with hardware upgrades to the large RHIC detectors (PHENIX and STAR) along with at least a factor of ten as increase in luminosity over the next few years as envisioned for RHIC-II.

G. David; R. Rapp; Z. Xu

2008-04-25T23:59:59.000Z

235

High-frequency Probing Diagnostic for Hall Current Plasma Thrusters  

SciTech Connect (OSTI)

High-frequency oscillations (1-100 MHz) in Hall thrusters have apparently eluded significant experimental scrutiny. A diagnostic setup, consisting of a single Langmuir probe, a special shielded probe connector-positioner, and an electronic impedance-matching circuit, was successfully built and calibrated. Through simultaneous high-frequency probing of the Hall thruster plasma at multiple locations, high-frequency plasma waves have been identified and characterized for various thruster operating conditions.

A.A. Litvak; Y. Raitses; N.J. Fisch

2001-10-25T23:59:59.000Z

236

Contamination effects on fixed-bias Langmuir probes  

SciTech Connect (OSTI)

Langmuir probes are standard instruments for plasma density measurements on many sounding rockets. These probes can be operated in swept-bias as well as in fixed-bias modes. In swept-bias Langmuir probes, contamination effects are frequently visible as a hysteresis between consecutive up and down voltage ramps. This hysteresis, if not corrected, leads to poorly determined plasma densities and temperatures. With a properly chosen sweep function, the contamination parameters can be determined from the measurements and correct plasma parameters can then be determined. In this paper, we study the contamination effects on fixed-bias Langmuir probes, where no hysteresis type effect is seen in the data. Even though the contamination is not evident from the measurements, it does affect the plasma density fluctuation spectrum as measured by the fixed-bias Langmuir probe. We model the contamination as a simple resistor-capacitor circuit between the probe surface and the plasma. We find that measurements of small scale plasma fluctuations (meter to sub-meter scale) along a rocket trajectory are not affected, but the measured amplitude of large scale plasma density variation (tens of meters or larger) is attenuated. From the model calculations, we determine amplitude and cross-over frequency of the contamination effect on fixed-bias probes for different contamination parameters. The model results also show that a fixed bias probe operating in the ion-saturation region is affected less by contamination as compared to a fixed bias probe operating in the electron saturation region.

Steigies, C. T. [Institut fuer Experimentelle und Angewandte Physik, Christian-Albrechts-Universitaet zu Kiel, 24098 Kiel (Germany); Barjatya, A. [Department of Physical Sciences, Embry-Riddle Aeronautical University, Daytona Beach, Florida 32114 (United States)

2012-11-15T23:59:59.000Z

237

Probing Emissions of Military Cargo Aircraft: Description of...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Emissions of Military Cargo Aircraft: Description of a Joint Field Measurement Strategic Environmental Research and Probing Emissions of Military Cargo Aircraft: Description of a...

238

Probing the Degradation Mechanisms in Electrolyte Solutions for...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Degradation Mechanisms in Electrolyte Solutions for Li-ion Batteries by In-Situ Transmission Electron Microscopy. Probing the Degradation Mechanisms in Electrolyte Solutions for...

239

atom probe study: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

using both APT and correlative microscopy techniques, a more complete understanding... Bennett, Samantha 2011-02-08 2 ATOM-PROBE TOMOGRAPHIC STUDY OF THE THREE-DIMENSIONAL...

240

Probing Molecular Associations of Field-Collected and Laboratory...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Molecular Associations of Field-Collected and Laboratory-Generated SOA with Nano-DESI High-Resolution Mass Spectrometry. Probing Molecular Associations of Field-Collected and...

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

atom probe investigation: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of both coherent and squeezed light. The stochastic master equations used in the analysis are expressed in terms of the Hamiltonian of the probed system and the interaction...

242

Fiber delivered probe for efficient CARS imaging of tissues  

E-Print Network [OSTI]

probe based on microelectromechanical system mirror forbased on a microelectromechanical systems scanning mirror,”based on a microelectromechanical systems two-dimensional

Balu, Mihaela; Liu, Gangjun; Chen, Zhongping; Tromberg, Bruce J; Potma, Eric O

2010-01-01T23:59:59.000Z

243

Probing the Dynamics of a Protein Hydrophobic Core by Deutron...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Dynamics of a Protein Hydrophobic Core by Deutron Solid-State Nuclear Magnetic Resonance Spectroscopy . Probing the Dynamics of a Protein Hydrophobic Core by Deutron Solid-State...

244

anisotropy probe wmap1: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: The Wilkinson Microwave Anisotropy Probe (WMAP) mapped the distribution of temperature and polarization over the entire sky in five microwave frequency bands. These...

245

anisotropy probe wmapobservations: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: The Wilkinson Microwave Anisotropy Probe (WMAP) mapped the distribution of temperature and polarization over the entire sky in five microwave frequency bands. These...

246

anisotropy probe 5-yr: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: The Wilkinson Microwave Anisotropy Probe (WMAP) mapped the distribution of temperature and polarization over the entire sky in five microwave frequency bands. These...

247

RPF101, a new capsaicin-like analogue, disrupts the microtubule network accompanied by arrest in the G2/M phase, inducing apoptosis and mitotic catastrophe in the MCF-7 breast cancer cells  

SciTech Connect (OSTI)

Breast cancer is the world's leading cause of death among women. This situation imposes an urgent development of more selective and less toxic agents. The use of natural molecular fingerprints as sources for new bioactive chemical entities has proven to be a quite promising and efficient method. Capsaicin, which is the primary pungent compound in red peppers, was reported to selectively inhibit the growth of a variety tumor cell lines. Here, we report for the first time a novel synthetic capsaicin-like analogue, RPF101, which presents a high antitumor activity on MCF-7 cell line, inducing arrest of the cell cycle at the G2/M phase through a disruption of the microtubule network. Furthermore, it causes cellular morphologic changes characteristic of apoptosis and a decrease of ??m. Molecular modeling studies corroborated the biological findings and suggested that RPF101, besides being a more reactive molecule towards its target, may also present a better pharmacokinetic profile than capsaicin. All these findings support the fact that RPF101 is a promising anticancer agent. -- Highlights: ? We report for the first time that RPF101 possesses anticancer properties. ? RPF101 induces apoptosis of human breast cancer cells. ? RPF 101 decreases mitochondrial potential and induces DNA fragmentation.

Sá-Júnior, Paulo Luiz de [Laboratory of Genetics, Butantan Institute, Vital Brasil Avenue 1500, Postal Code: 05503-900, Sao Paulo (Brazil)] [Laboratory of Genetics, Butantan Institute, Vital Brasil Avenue 1500, Postal Code: 05503-900, Sao Paulo (Brazil); Pasqualoto, Kerly Fernanda Mesquita [Biochemistry and Biophysical Laboratory, Butantan Institute, Vital Brasil Avenue 1500, Postal Code: 05503-900, Sao Paulo (Brazil)] [Biochemistry and Biophysical Laboratory, Butantan Institute, Vital Brasil Avenue 1500, Postal Code: 05503-900, Sao Paulo (Brazil); Ferreira, Adilson Kleber [Laboratory of Genetics, Butantan Institute, Vital Brasil Avenue 1500, Postal Code: 05503-900, Sao Paulo (Brazil)] [Laboratory of Genetics, Butantan Institute, Vital Brasil Avenue 1500, Postal Code: 05503-900, Sao Paulo (Brazil); Tavares, Maurício Temotheo; Damião, Mariana Celestina Frojuello Costa Bernstorff [Department of Pharmacy, School of Pharmaceutical Sciences, University of Sao Paulo, Prof. Lineu Prestes Avenue, 580, Postal Code: 05508-000, Sao Paulo (Brazil); Azevedo, Ricardo Alexandre de [Biochemistry and Biophysical Laboratory, Butantan Institute, Vital Brasil Avenue 1500, Postal Code: 05503-900, Sao Paulo (Brazil)] [Biochemistry and Biophysical Laboratory, Butantan Institute, Vital Brasil Avenue 1500, Postal Code: 05503-900, Sao Paulo (Brazil); Câmara, Diana Aparecida Dias; Pereira, Alexandre; Madeiro de Souza, Dener [Laboratory of Genetics, Butantan Institute, Vital Brasil Avenue 1500, Postal Code: 05503-900, Sao Paulo (Brazil)] [Laboratory of Genetics, Butantan Institute, Vital Brasil Avenue 1500, Postal Code: 05503-900, Sao Paulo (Brazil); Parise Filho, Roberto, E-mail: roberto.parise@usp.br [Department of Pharmacy, School of Pharmaceutical Sciences, University of Sao Paulo, Prof. Lineu Prestes Avenue, 580, Postal Code: 05508-000, Sao Paulo (Brazil)

2013-02-01T23:59:59.000Z

248

Synthesis and characterization of redox polymers of (M(4-vinyl-4 prime -methyl-2,2 prime -bipyridine) sub 3 )(PF sub 6 ) sub 2 (M = Ru, Os)  

SciTech Connect (OSTI)

The authors have prepared polymers of (M(vbpy){sub 3}(PF{sub 6}){sub 2}) (M = Ru, Os) (vbpy = 4-vinyl-4{prime}-methyl-2,2{prime}-bipyridine) in solution via free-radical polymerization and fractionated them according to molecular weight using size exclusion chromatography. Different fractions have been characterized by electrochemical and spectroscopic means. The authors find that whereas for the osmium containing polymers the relative polymer size varies in proportion to the number of vinyl groups consumed during the polymerization reaction, the same is not true for the analogous ruthenium polymers. In addition, the emission energy of both the ruthenium and osmium polymers is also related to the concentration of residual vinyl groups in the polymer. Upon polymerization, there is a shift in the emission toward higher energies. Electrochemically determined diffusion coefficients are consistent with the relative size of the various fractions.

Bommarito, S.L.; Lowery-Bretz, S.P.; Abruna, H.D. (Cornell Univ., Ithaca, NY (United States))

1992-02-05T23:59:59.000Z

249

A class of infinite-dimensional representations of the Lie superalgebra osp(2m+1|2n) and the parastatistics Fock space  

E-Print Network [OSTI]

An orthogonal basis of weight vectors for a class of infinite-dimensional representations of the orthosymplectic Lie superalgebra osp(2m+1|2n) is introduced. These representations are particular lowest weight representations V(p), with a lowest weight of the form [-p/2,...,-p/2|p/2,...,p/2], p being a positive integer. Explicit expressions for the transformation of the basis under the action of algebra generators are found. Since the relations of algebra generators correspond to the defining relations of m pairs of parafermion operators and n pairs of paraboson operators with relative parafermion relations, the parastatistics Fock space of order p is also explicitly constructed. Furthermore, the representations V(p) are shown to have interesting characters in terms of supersymmetric Schur functions, and a simple character formula is also obtained.

Stoilova, N I

2015-01-01T23:59:59.000Z

250

A series of layered intergrowth phases grown by molecular beam epitaxy: Sr{sub m}TiO{sub 2+m}(m=1-5)  

SciTech Connect (OSTI)

Sr{sub m}TiO{sub 2+m} phases having one TiO{sub 2} layer sandwiched between m SrO layers were grown using molecular beam epitaxy. The out-of-plane (in-plane) lattice parameters determined by x-ray diffraction were c(a)=9.14 A (3.78 A), 23.55 A (3.75 A), and 14.60 A (3.75 A) for Sr{sub 3}TiO{sub 5}, Sr{sub 4}TiO{sub 6}, and Sr{sub 5}TiO{sub 7}, respectively. Both lattice parameters change abruptly on going from the m=2 Ruddlesden-Popper phase to m=3 phase, indicating a significant change in the bond lengths (or strain states) on transitioning from the known members to the higher order members of this structural family. Electron microscopy confirmed the artificially layered structures.

Fisher, P.; Wang, S.; Skowronski, M.; Salvador, P. A.; Snyder, M.; Maksimov, O. [Department of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213 (United States); Electro-Optics Center, Pennsylvania State University, Freeport, Pennsylvania 16229 (United States)

2007-12-17T23:59:59.000Z

251

Direct Probing of Charge Injection and Polarization-Controlled Ionic Mobility on Ferroelectric LiNbO3 Surfaces  

SciTech Connect (OSTI)

Mapping surface potential with time-resolved Kelvin Probe Force Microscopy (tr-KPFM) in LiNbO3 periodically-poled single crystal revealed activation of the surface ionic subsystem. Electric fields higher than certain threshold value but lower than the switching field induce injection of charge from the biased electrode, formation of an active region in its vicinity and uneven distribution of screening charge on the opposite ferroelectric domains. Tr-KPFM technique allows investigating these phenomena in details.

Strelcov, Evgheni [ORNL] [ORNL; Ievlev, Dr. Anton [Ural State University, Russia] [Ural State University, Russia; Jesse, Stephen [ORNL] [ORNL; Kravchenko, Ivan I [ORNL] [ORNL; Shur, V.Y. [Institute of Physics and Applied Mathematics, Ural State University] [Institute of Physics and Applied Mathematics, Ural State University; Kalinin, Sergei V [ORNL] [ORNL

2014-01-01T23:59:59.000Z

252

Chemical sensor with oscillating cantilevered probe  

DOE Patents [OSTI]

The invention provides a method of detecting a chemical species with an oscillating cantilevered probe. A cantilevered beam is driven into oscillation with a drive mechanism coupled to the cantilevered beam. A free end of the oscillating cantilevered beam is tapped against a mechanical stop coupled to a base end of the cantilevered beam. An amplitude of the oscillating cantilevered beam is measured with a sense mechanism coupled to the cantilevered beam. A treated portion of the cantilevered beam is exposed to the chemical species, wherein the cantilevered beam bends when exposed to the chemical species. A second amplitude of the oscillating cantilevered beam is measured, and the chemical species is determined based on the measured amplitudes.

Adams, Jesse D

2013-02-05T23:59:59.000Z

253

Towards Optimization of Probe Placement for Radio-Frequency Ablation  

E-Print Network [OSTI]

's electric potential and of the steady state of the heat distribution during RF ablation. The optimization with mono- or bipolar systems: A probe, connected to an electric generator, is placed inside the malignant tissue, such that an electric current flows through the body and heats the tissue near the probe up

Preusser, Tobias

254

Scanning Probe Laser Terahertz Emission Microscopy System Ryotaro INOUE  

E-Print Network [OSTI]

is irradiated from the vicinity of the surface by an optical-fiber probe. The large numerical aperture pulse is irradiated to the sample surface by a commercial optical-fiber probe (LWP-LEN-SM, Cascade the sample surface, and terahertz emission from the locally photoexcited area is obtained. Using an optical-fiber

Tonouchi, Masayoshi

255

Using relational databases to analyze Microarray probes and single nucleotide  

E-Print Network [OSTI]

Using relational databases to analyze Microarray probes and single nucleotide Polymorphisms Abhijit probes and sin- gle nucleotide polymorphisms Abhijit W. Phatak1 , and Eric C. Rouchka1,* 1 Department valuable in the study of single nucleotide polymor- phisms (SNPs). Aside from the physical use

Rouchka, Eric

256

Extreme conditions during multibubble cavitation: Sonoluminescence as a spectroscopic probe  

E-Print Network [OSTI]

Extreme conditions during multibubble cavitation: Sonoluminescence as a spectroscopic probe Kenneth Cavitation MBSL Plasma a b s t r a c t We review recent work on the use of sonoluminescence (SL) to probe spectroscopically the conditions created during cavitation, both in clouds of collapsing bubbles (multibubble

Suslick, Kenneth S.

257

Structural Dynamics of a Catalytic Monolayer Probed by Ultrafast  

E-Print Network [OSTI]

REPORTS Structural Dynamics of a Catalytic Monolayer Probed by Ultrafast 2D IR Vibrational Echoes in solutions. Here, we extend the technique to probing the interfacial dynamics and structure of a silica. The structural dynamics, as reported on by a carbonyl stretch vibration of the surface-bound complex, have

Fayer, Michael D.

258

A new acoustic three dimensional intensity and energy density probe  

E-Print Network [OSTI]

A new acoustic three dimensional intensity and energy density probe F. Aymea , C. Carioub , M is a great advantage. In this frame, a new intensity acoustic probe has been developed to compute acoustic quantities which can be input data for energetic identification methods. 1 Introduction Noise matters

Boyer, Edmond

259

Science Programs for a 2 m-class Telescope at Dome C, Antarctica: PILOT, the Pathfinder for an International Large Optical Telescope  

E-Print Network [OSTI]

The cold, dry and stable air above the summits of the Antarctic plateau provides the best ground-based observing conditions from optical to sub-mm wavelengths to be found on the Earth. PILOT is a proposed 2 m telescope, to be built at Dome C in Antarctica, able to exploit these conditions for conducting astronomy at optical and infrared wavelengths. While PILOT is intended as a pathfinder towards the construction of future grand-design facilities, it will also be able to undertake a range of fundamental science investigations in its own right. This paper provides the performance specifications for PILOT, including its instrumentation. It then describes the kinds of science projects that it could best conduct. These range from planetary science to the search for other solar systems, from star formation within the Galaxy to the star formation history of the Universe, and from gravitational lensing caused by exo-planets to that produced by the cosmic web of dark matter. PILOT would be particularly powerful for wide-field imaging at infrared wavelengths, achieving near-diffraction limited performance with simple tip-tilt wavefront correction. PILOT would also be capable of near-diffraction limited performance in the optical wavebands, as well be able to open new wavebands for regular ground based observation; in the mid-IR from 17 to 40 microns and in the sub-mm at 200 microns.

M. G. Burton; J. Lawrence; M. C. B. Ashley; J. A. Bailey; C. Blake; T. R. Bedding; J. Bland-Hawthorn; I. A. Bond; K. Glazebrook; M. G. Hidas; G. Lewis; S. N. Longmore; S. T. Maddison; S. Mattila; V. Minier; S. D. Ryder; R. Sharp; C. H. Smith; J. W. V. Storey; C. G. Tinney; P. Tuthill; A. J. Walsh; W. Walsh; M. Whiting; T. Wong; D. Woods; P. C. M. Yock

2005-04-29T23:59:59.000Z

260

Organelle-Specific Activity-Based Protein Profiling in Living Cells  

SciTech Connect (OSTI)

A multimodal acidic organelle targeting activity-based probe was developed for analysis of subcellular native enzymatic activity of cells by fluorescent microscopy and mass spectrometry. A cathepsin reactive warhead was conjugated to an acidotropic amine, and a clickable alkyne for appendage of AlexaFluor 488 or biotin reporter tags. This probe accumulated in punctate vesicles surrounded by LAMP1, a lysosome marker, as observed by Structured Illumination Microscopy (SIM) in J774 mouse macrophage cells. Biotin conjugation, affinity purification, and analysis of in vivo labeled J774 by mass spectrometry showed that the probe was very selective for Cathepsins B and Z, two lysosomal cysteine proteases. Analysis of starvation induced autophagy, which is an increase in cell component catabolism involving lysosomes, showed a large increase in tagged protein number and an increase in cathepsin activity. Organelle targeting activity-based probes and subsequent analysis of resident proteins by mass spectrometry is enabled by tuning the physicochemical properties of the probe.

Wiedner, Susan D.; Anderson, Lindsey N.; Sadler, Natalie C.; Chrisler, William B.; Kodali, Vamsi K.; Smith, Richard D.; Wright, Aaron T.

2014-02-06T23:59:59.000Z

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

LISA as a dark energy probe  

E-Print Network [OSTI]

Recently it was shown that the inclusion of higher signal harmonics in the inspiral signals of binary supermassive black holes (SMBH) leads to dramatic improvements in parameter estimation with the Laser Interferometer Space Antenna (LISA). In particular, the angular resolution becomes good enough to identify the host galaxy or galaxy cluster, in which case the redshift can be determined by electromagnetic means. The gravitational wave signal also provides the luminosity distance with high accuracy, and the relationship between this and the redshift depends sensitively on the cosmological parameters, such as the equation-of-state parameter $w=p_{\\rm DE}/\\rho_{\\rm DE}$ of dark energy. With a single binary SMBH event at $z < 1$ having appropriate masses and orientation, one would be able to constrain $w$ to within a few percent. We show that, if the measured sky location is folded into the error analysis, the uncertainty on $w$ goes down by an additional factor of 2-3, leaving weak lensing as the only limiting factor in using LISA as a dark energy probe.

K G Arun; Chandra Kant Mishra; Chris Van Den Broeck; B R Iyer; B S Sathyaprakash; Siddhartha Sinha

2009-04-20T23:59:59.000Z

262

A Red Cy3-Based Biarsenical Fluorescent Probe Targeted to a Complement...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Red Cy3-Based Biarsenical Fluorescent Probe Targeted to a Complementary Binding Peptide. A Red Cy3-Based Biarsenical Fluorescent Probe Targeted to a Complementary Binding Peptide....

263

Development progress of the Materials Analysis and Particle Probe  

SciTech Connect (OSTI)

The Materials Analysis and Particle Probe (MAPP) is a compact in vacuo surface science diagnostic, designed to provide in situ surface characterization of plasma facing components in a tokamak environment. MAPP has been implemented for operation on the Lithium Tokamak Experiment at Princeton Plasma Physics Laboratory (PPPL), where all control and analysis systems are currently under development for full remote operation. Control systems include vacuum management, instrument power, and translational/rotational probe drive. Analysis systems include onboard Langmuir probes and all components required for x-ray photoelectron spectroscopy, low-energy ion scattering spectroscopy, direct recoil spectroscopy, and thermal desorption spectroscopy surface analysis techniques.

Lucia, M., E-mail: mlucia@pppl.gov; Kaita, R.; Majeski, R.; Boyle, D. P.; Schmitt, J. C.; Onge, D. A. St. [Princeton Plasma Physics Laboratory (PPPL), Princeton, New Jersey 08543 (United States); Bedoya, F.; Allain, J. P. [Department of Nuclear, Plasma, and Radiological Engineering, University of Illinois at Urbana-Champaign (UIUC), Urbana, Illinois 61801 (United States)

2014-11-15T23:59:59.000Z

264

Methods of and apparatus for levitating an eddy current probe  

DOE Patents [OSTI]

An eddy current probe is supported against the force of gravity with an air earing while being urged horizontally toward the specimen being examined by a spring and displaced horizontally against the force of the spring pneumatically. The pneumatic displacement is accomplished by flowing air between a plenum chamber fixed with respect to the probe and the surface of the specimen. In this way, the surface of the specimen can be examined without making mechanical contact therewith while precisely controlling the distance at which the probe stands-off from the surface of the specimen.

Stone, William J. (Kansas City, MO)

1988-05-03T23:59:59.000Z

265

Probing Strain-Induced Changes in Electronic Structure with XMCD  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FORPoints of ContactLiquidProbingProbingProbing

266

Combined Atomic Force Microscope-Based Topographical Imaging and Nanometer Scale Resolved Proximal Probe Thermal Desorption/Electrospray Ionization-Mass Spectrometry  

SciTech Connect (OSTI)

Nanometer scale proximal probe thermal desorption/electrospray ionization mass spectrometry (TD/ESI-MS) was demonstrated for molecular surface sampling of caffeine from a thin film using a 30 nm diameter nano-thermal analysis (nano-TA) probe tip in an atomic force microscope (AFM) coupled via a vapor transfer line and ESI interface to a MS detection platform. Using a probe temperature of 350 C and a spot sampling time of 30 s, conical desorption craters 250 nm in diameter and 100 nm deep were created as shown through subsequent topographical imaging of the surface within the same system. Automated sampling of a 5 x 2 array of spots, with 2 m spacing between spots, and real time selective detection of the desorbed caffeine using tandem mass spectrometry was also demonstrated. Estimated from the crater volume (~2x106 nm3), only about 10 amol (2 fg) of caffeine was liberated from each thermal desorption crater in the thin film. These results illustrate a relatively simple experimental setup and means to acquire in automated fashion sub-micrometer scale spatial sampling resolution and mass spectral detection of materials amenable to TD. The ability to achieve MS-based chemical imaging with 250 nm scale spatial resolution with this system is anticipated.

Ovchinnikova, Olga S [ORNL; Nikiforov, Maxim [ORNL; Bradshaw, James A [ORNL; Jesse, Stephen [ORNL; Van Berkel, Gary J [ORNL

2011-01-01T23:59:59.000Z

267

Title of Document: NANOSCALE MANIPULATION, PROBING, AND ASSEMBLY USING MICROFLUIDIC  

E-Print Network [OSTI]

ABSTRACT Title of Document: NANOSCALE MANIPULATION, PROBING, AND ASSEMBLY USING MICROFLUIDIC FLOW along the wire. Together, these experiments illustrate the versatility of microfluidics MICROFLUIDIC FLOW CONTROL By Chad Ropp Dissertation submitted to the Faculty of the Graduate School

Anlage, Steven

268

Development Of 2-Meter Soil Temperature Probes And Results Of...  

Open Energy Info (EERE)

Meter Soil Temperature Probes And Results Of Temperature Survey Conducted At Desert Peak, Nevada, Usa Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference...

269

Embrittlement of RPV steels; An atom probe tomography perspective  

SciTech Connect (OSTI)

Atom probe tomography has played a key role in the understanding of the embrittlement of neutron irradiated reactor pressure vessel steels through the atomic level characterization of the microstructure. Atom probe tomography has been used to demonstrate the importance of the post weld stress relief treatment in reducing the matrix copper content in high copper alloys, the formation of {approx}-nm-diameter copper-, nickel-, manganese- and silicon-enriched precipitates during neutron irradiation in copper containing RPV steels, and the coarsening of these precipitates during post irradiation heat treatments. Atom probe tomography has been used to detect {approx}2-nm-diameter nickel-, silicon- and manganese-enriched clusters in neutron irradiated low copper and copper free alloys. Atom probe tomography has also been used to quantify solute segregation to, and precipitation on, dislocations and grain boundaries.

Miller, Michael K [ORNL; Russell, Kaye F [ORNL

2007-01-01T23:59:59.000Z

270

Dynamic study of tunable stiffness scanning microscope probe  

E-Print Network [OSTI]

This study examines the dynamic characteristics of the in-plane tunable stiffness scanning microscope probe for an atomic force microscope (AFM). The analysis was carried out using finite element analysis (FEA) methods for ...

Vega González, Myraida Angélica

2005-01-01T23:59:59.000Z

271

Flexible high-temperature pH probe  

DOE Patents [OSTI]

A flexible pH probe device is provided for use in hot water and other high temperature environments up to about 590.degree. F. The pH probe includes a flexible, inert tubular probe member, an oxygen anion conducting, solid state electrolyte plug located at the distal end of the tubular member, oxide powder disposed at the distal end of the tubular member; a metal wire extending along the tubular member and having a distal end in contact with the oxide powder so as to form therewith an internal reference electrode; and a compression fitting forming a pressure boundary seal around a portion of the tubular member remote from the distal end thereof. Preferably, the tubular member is made of polytetrafluoroethylene, and the solid state electrolyte plug is made of stabilized zirconia. The flexibility of the probe member enables placement of the electrode into the area of interest, including around corners, into confined areas and the like.

Bielawski, John C. (Scotia, NY); Outwater, John O. (Cambridge, MA); Halbfinger, George P. (Schenectady, NY)

2003-04-22T23:59:59.000Z

272

Parylene Coated Silicon Probes for Neural Prosthesis Ray Huang1*  

E-Print Network [OSTI]

breakage. However, manufacturing limitations have prevented a strong and biocompatible silicon electrode as well as the in vitro electrical characterization of the gold and platinum micro electrodes. Keywords - parylene cable; neural prosthesis; silicon probe I. INTRODUCTION An important

Andersen, Richard

273

Magnetic nanowire based high resolution magnetic force microscope probes  

E-Print Network [OSTI]

-resolution magnetic force microscope probes using preformed magnetic nanowires. Nickel and cobalt nanowires produced by electrodeposition were directly assembled onto the tip of a commercial atomic force microscope cantilever

Qin, Lu-Chang

274

Probing Valance and Core Excitons in Molecules by Coherent Multidimens...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

are simulated. Time-domain experiments that employ sequences of attosecond x-ray pulses in order to probe electronic and nuclear dynamics in molecules are made possible by...

275

Probing Porosity and Pore Interconnectivity in Crystalline Mesoporous...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Porosity and Pore Interconnectivity in Crystalline Mesoporous TiO2 Using Hyperpolarized Xe-129 NMR. Probing Porosity and Pore Interconnectivity in Crystalline Mesoporous TiO2 Using...

276

Probing the Electronic Structures of Low Oxidation-State Uranium...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Fluoride Molecules UFx- (x2-4). Probing the Electronic Structures of Low Oxidation-State Uranium Fluoride Molecules UFx- (x2-4). Abstract: We report the experimental observation...

277

Probing the electronic structures of low oxidation-state uranium...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

molecules UFx- (x2-4) . Probing the electronic structures of low oxidation-state uranium fluoride molecules UFx- (x2-4) . Abstract: We report the experimental observation...

278

Weak lensing flexion as a probe of galaxy cluster substructure  

E-Print Network [OSTI]

Measuring galaxy cluster total masses and the amount of dark matter substructure within galaxy cluster haloes is a fundamental probe of the ACDM model of structure formation, as well as the interactions between baryonic ...

Cain, Benjamin Martin

2011-01-01T23:59:59.000Z

279

Effect of filament supports on emissive probe measurements  

SciTech Connect (OSTI)

We have constructed an emissive probe with a thin tungsten filament spot-welded across two nickel wires insulated with ceramic paint. We show that the ceramic supports covering the nickel wires have a large effect on the potential measurements in low-density plasmas. It is found that the potential measured by the emissive probe is more negative than the potential derived from a Langmuir probe current-voltage (I-V) characteristic curve when the plasma density is so low that the emitting filament remains immersed in the sheaths of the ceramic supports. The length of the filament L needs to be larger than about 2 Debye lengths (L > 2{lambda}{sub De}) in order to avoid the influence of the ceramic supports and to achieve reliable plasma potential measurements using emissive probes.

Wang, X.; Howes, C. T. [Laboratory for Atmospheric and Space Physics, University of Colorado, Boulder, Colorado 80309 (United States); NASA Lunar Science Institute: Colorado Center for Lunar Dust and Atmospheric Studies, Boulder, Colorado 80309 (United States); Horanyi, M. [Laboratory for Atmospheric and Space Physics, University of Colorado, Boulder, Colorado 80309 (United States); NASA Lunar Science Institute: Colorado Center for Lunar Dust and Atmospheric Studies, Boulder, Colorado 80309 (United States); Department of Physics, University of Colorado, Boulder, Colorado 80309 (United States); Robertson, S. [NASA Lunar Science Institute: Colorado Center for Lunar Dust and Atmospheric Studies, Boulder, Colorado 80309 (United States); Department of Physics, University of Colorado, Boulder, Colorado 80309 (United States)

2013-01-15T23:59:59.000Z

280

Application of FRET probes in the analysis of neuronal plasticity  

E-Print Network [OSTI]

Breakthroughs in imaging techniques and optical probes in recent years have revolutionized the field of life sciences in ways that traditional methods could never match. The spatial and temporal regulation of molecular ...

Ueda, Yoshibumi

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Multi-probe robotic positioner for cryoablation in MRI  

E-Print Network [OSTI]

This thesis describes the design of a guidance device for faster and more accurate targeting of multiple probes during cryoablation and other percutaneous interventions performed in closed bore magnetic resonance (MR) ...

Wu, Faye Y

2012-01-01T23:59:59.000Z

282

Neural network calibration for miniature multi-hole pressure probes  

E-Print Network [OSTI]

A robust and accurate neural network based algorithm phics. for the calibration of miniature multi-hole pressure probes has been developed and a detailed description of its features and use is presented. The code that was developed was intended...

Vijayagopal, Rajesh

1998-01-01T23:59:59.000Z

283

Matrix probing, skeleton decompositions, and sparse Fourier transform  

E-Print Network [OSTI]

In this thesis, we present three different randomized algorithms that help to solve matrices, compute low rank approximations and perform the Fast Fourier Transform. Matrix probing and its conditioning When a matrix A with ...

Chiu, Jiawei

2013-01-01T23:59:59.000Z

284

Scanning probe microscopy with inherent disturbance suppression using micromechanical systems  

E-Print Network [OSTI]

All scanning probe microscopes (SPMs) are affected by disturbances, or mechanical noise, in their environments which can limit their imaging resolution. This thesis introduces a general approach for suppressing out-of-plane ...

Sparks, Andrew William, 1977-

2005-01-01T23:59:59.000Z

285

Matter wave optical techniques for probing many-body targets  

E-Print Network [OSTI]

This thesis reports on our investigation of the uses of matter waves to probe many-body targets. We begin by discussing decoherence in an atom interferometer, in which a free gas acts as a refractive medium for a matter ...

Sanders, Scott Nicholas

2010-01-01T23:59:59.000Z

286

Probing SZ Source Detection with Gasdynamical Simulations  

E-Print Network [OSTI]

The huge worldwide investment in CMB experiments should make the Sunyaev-Zeldovich (SZ) effect a key probe of the cosmic web in the near future. For the promise to be realized, substantial development of simulation and analysis tools to relate observation to theory is needed. The high nonlinearity and dissipative/feedback gas physics lead to highly non-Gaussian patterns that are much more difficult to analyze than Gaussian primary anisotropies for which the procedures are reasonably well developed. Historical forecasts for what CMB experiments might see used semi-analytic tools, including large scale map constructions, with localized and simplified pressure structures distributed on a point process of (clustered) sources. Hydro studies beyond individual cluster/supercluster systems were inadequate, but now large-volume simulations with high resolution are beginning to shift the balance. We illustrate this by applying ``Gasoline'' (parallelized Tree+SPH) computations to construct SZ maps and derive statistical measures. We believe rapid Monte Carlo simulations using parameterized templates centered on point processes informed by optical and other means on the observational side, and by hydro simulations on the theory side, should play an important role in pipelines to analyze the new SZ field data. We show that localized sources should dominate upcoming SZ experiments, identify sources in the maps under filtering and noise levels expected for these experiments, use the RCS photometric optical survey as an example of redshift localization, and discuss whether cosmic web patterns such as superclusters can be enhanced when such extra source information is supplied.

J. Richard Bond; Marcelo I. Ruetalo; James W. Wadsley; Michael D. Gladders

2002-05-30T23:59:59.000Z

287

Probing Compositeness with Higgs Boson Decays at the LHC  

E-Print Network [OSTI]

A method is proposed to directly probe the Higgs boson compositeness using the unique characteristics of a boosted Higgs boson produced in association with a weak gauge boson ($W^{\\pm},Z$). The discovery potential for the upcoming LHC running is presented, showing that compositeness scales up to 3 TeV can be probed at the LHC with an integrated luminosity of $\\mathcal{L}=3000$ fb$^{-1}$ collected at $\\sqrt{s}=13$ TeV.

Maria Hoffmann; Anna Kaminska; Rosy Nicolaidou; Stathes Paganis

2014-10-28T23:59:59.000Z

288

Preliminary Langmuir probe results on the CTX gun experiment  

SciTech Connect (OSTI)

Preliminary results obtained with a double Langmuir probe in the Compact Toroid experiment facility confirm the existence of a gun plasma of n approx. 5 x 10/sup 14/ cm/sup -3/ and T approx. 10 eV lasting for approx. 250 to 400 ..mu..s, which is consistent with interferometry and Thomson scattering data. The probe current characteristics as a function of voltage suggest non-Maxwellian features of the particles distribution functions.

Tuszewski, M.

1981-12-01T23:59:59.000Z

289

Optical Nanofibers for Manipulating and Probing Single-Atom Fluorescence  

E-Print Network [OSTI]

We demonstrate how optical nanofibers can be used to manipulate and probe single-atom fluorescence. We show that fluorescence photons from a very small number of atoms, average atom number of less than 0.1, around the nanofiber can readily be observed through single-mode optical fiber under resonant laser irradiation. We show also that optical nanofibers enable us to probe the van der Waals interaction between atoms and surface with high precision by observing the fluorescence excitation spectrum.

K. P. Nayak; P. N. Melentiev; M. Morinaga; Fam Le Kien; V. I. Balykin; K. Hakuta

2006-10-17T23:59:59.000Z

290

Optical Nanofibers for Manipulating and Probing Single-Atom Fluorescence  

E-Print Network [OSTI]

We demonstrate how optical nanofibers can be used to manipulate and probe single-atom fluorescence. We show that fluorescence photons from a very small number of atoms, average atom number of less than 0.1, around the nanofiber can readily be observed through single-mode optical fiber under resonant laser irradiation. We show also that optical nanofibers enable us to probe the van der Waals interaction between atoms and surface with high precision by observing the fluorescence excitation spectrum.

Nayak, K P; Morinaga, M; Le Kien, F; Balykin, V I; Hakuta, K; Kien, Fam Le

2006-01-01T23:59:59.000Z

291

Situ soil sampling probe system with heated transfer line  

DOE Patents [OSTI]

The present invention is directed both to an improved in situ penetrometer probe and to a heated, flexible transfer line. The line and probe may be implemented together in a penetrometer system in which the transfer line is used to connect the probe to a collector/analyzer at the surface. The probe comprises a heater that controls a temperature of a geologic medium surrounding the probe. At least one carrier gas port and vapor collection port are located on an external side wall of the probe. The carrier gas port provides a carrier gas into the geologic medium, and the collection port captures vapors from the geologic medium for analysis. In the transfer line, a flexible collection line that conveys a collected fluid, i.e., vapor, sample to a collector/analyzer. A flexible carrier gas line conveys a carrier gas to facilitate the collection of the sample. A system heating the collection line is also provided. Preferably the collection line is electrically conductive so that an electrical power source can generate a current through it so that the internal resistance generates heat.

Robbat, Jr., Albert (Andover, MA)

2002-01-01T23:59:59.000Z

292

A new seismic probe for coal seam hazard detection  

SciTech Connect (OSTI)

An experimental hole-to-hole seismic probe system has been developed for use in coal measure geology as a means of determining the structural conditions of coal seams. The source probe produces a 500-joule electric arc discharge whose seismic wavelet has a spectrum in the 200 to 2,000 Hz frequency range. Low compliance hydrophones contained in the source probe as well as in a separate seismic detector probe are matched to the frequency range of the source. Both probes are constructed with 5.72 cm diameter housings. The transducers in the probes are equipped with fluid-inflatable boots to permit operation in either wet or dry boreholes. Preliminary tests in vertical boreholes drilled 213 m apart in sedimentary rock formations show reliable operation and useful seismic propagation measurements along horizontal and oblique paths up to 232 m in length. Because the seismic wavelet has an accurately repeatable waveshape, multiple shots and signal averaging techniques can be used to enhance the signal-to-noise ratio and extend the transmission distances.

Peters, W.R.; Owen, T.E.; Thill, R.E.

1985-01-01T23:59:59.000Z

293

Improved analysis techniques for cylindrical and spherical double probes  

SciTech Connect (OSTI)

A versatile double Langmuir probe technique has been developed by incorporating analytical fits to Laframboise's numerical results for ion current collection by biased electrodes of various sizes relative to the local electron Debye length. Application of these fits to the double probe circuit has produced a set of coupled equations that express the potential of each electrode relative to the plasma potential as well as the resulting probe current as a function of applied probe voltage. These equations can be readily solved via standard numerical techniques in order to determine electron temperature and plasma density from probe current and voltage measurements. Because this method self-consistently accounts for the effects of sheath expansion, it can be readily applied to plasmas with a wide range of densities and low ion temperature (T{sub i}/T{sub e} Much-Less-Than 1) without requiring probe dimensions to be asymptotically large or small with respect to the electron Debye length. The presented approach has been successfully applied to experimental measurements obtained in the plume of a low-power Hall thruster, which produced a quasineutral, flowing xenon plasma during operation at 200 W on xenon. The measured plasma densities and electron temperatures were in the range of 1 Multiplication-Sign 10{sup 12}-1 Multiplication-Sign 10{sup 17} m{sup -3} and 0.5-5.0 eV, respectively. The estimated measurement uncertainty is +6%/-34% in density and +/-30% in electron temperature.

Beal, Brian; Brown, Daniel; Bromaghim, Daron [Air Force Research Laboratory, 1 Ara Rd., Edwards Air Force Base, California 93524 (United States); Johnson, Lee [Jet Propulsion Laboratory, California Institute of Technology, 4800 Oak Grove Dr., Pasadena, California 91109 (United States); Blakely, Joseph [ERC Inc., 1 Ara Rd., Edwards Air Force Base, California 93524 (United States)

2012-07-15T23:59:59.000Z

294

Crystalline Nanoporous Frameworks: a Nanolaboratory for Probing Excitonic Device Concepts.  

SciTech Connect (OSTI)

Electro-optical organic materials hold great promise for the development of high-efficiency devices based on exciton formation and dissociation, such as organic photovoltaics (OPV) and organic light-emitting devices (OLEDs). However, the external quantum efficiency (EQE) of both OPV and OLEDs must be improved to make these technologies economical. Efficiency rolloff in OLEDs and inability to control morphology at key OPV interfaces both reduce EQE. Only by creating materials that allow manipulation and control of the intimate assembly and communication between various nanoscale excitonic components can we hope to first understand and then engineer the system to allow these materials to reach their potential. The aims of this proposal are to: 1) develop a paradigm-changing platform for probing excitonic processes composed of Crystalline Nanoporous Frameworks (CNFs) infiltrated with secondary materials (such as a complimentary semiconductor); 2) use them to probe fundamental aspects of excitonic processes; and 3) create prototype OPVs and OLEDs using infiltrated CNF as active device components. These functional platforms will allow detailed control of key interactions at the nanoscale, overcoming the disorder and limited synthetic control inherent in conventional organic materials. CNFs are revolutionary inorganic-organic hybrid materials boasting unmatched synthetic flexibility that allow tuning of chemical, geometric, electrical, and light absorption/generation properties. For example, bandgap engineering is feasible and polyaromatic linkers provide tunable photon antennae; rigid 1-5 nm pores provide an oriented, intimate host for triplet emitters (to improve light emission in OLEDs) or secondary semiconducting polymers (creating a charge-separation interface in OPV). These atomically engineered, ordered structures will enable critical fundamental questions to be answered concerning charge transport, nanoscale interfaces, and exciton behavior that are inaccessible in disordered systems. Implementing this concept also creates entirely new dimensions for device fabrication that could both improve performance, increase durability, and reduce costs with unprecedented control of over properties. This report summarizes the key results of this project and is divided into sections based on publications that resulted from the work. We begin in Section 2 with an investigation of light harvesting and energy transfer in a MOF infiltrated with donor and acceptor molecules of the type typically used in OPV devices (thiophenes and fullerenes, respectively). The results show that MOFs can provide multiple functions: as a light harvester, as a stabilizer and organizer or the infiltrated molecules, and as a facilitator of energy transfer. Section 3 describes computational design of MOF linker groups to accomplish light harvesting in the visible and facilitate charge separation and transport. The predictions were validated by UV-visible absorption spectroscopy, demonstrating that rational design of MOFs for light-harvesting purposes is feasible. Section 4 extends the infiltration concept discussed in Section to, which we now designate as %22Molecule%40MOF%22 to create an electrically conducting framework. The tailorability and high conductivity of this material are unprecedented, meriting publication in the journal Science and spawning several Technical Advances. Section 5 discusses processes we developed for depositing MOFs as thin films on substrates, a critical enabling technology for fabricating MOF-based electronic devices. Finally, in Section 6 we summarize results showing that a MOF thin film can be used as a sensitizer in a DSSC, demonstrating that MOFs can serve as active layers in excitonic devices. Overall, this project provides several crucial proofs-of- concept that the potential of MOFs for use in optoelectronic devices that we predicted several years ago [ 3 ] can be realized in practice.

Allendorf, Mark D.; Azoulay, Jason; Ford, Alexandra Caroline [Sandia National Laboratories, Albuquerque, NM; Foster, Michael E.; El Gabaly Marquez, Farid; Leonard, Francois Leonard; Leong-Hau, Kirsty; Stavila, Vitalie; Talin, Albert Alec; Wong, Brian M.; Brumbach, Michael T. [Sandia National Laboratories, Albuquerque, NM; Van Gough, D.; Lambert, Timothy N. [Sandia National Laboratories, Albuquerque, NM; Rodriguez, Mark A. [Sandia National Laboratories, Albuquerque, NM; Spoerke, Erik David [Sandia National Laboratories, Albuquerque, NM; Wheeler, David R. [Sandia National Laboratories, Albuquerque, NM; Deaton, Joseph C.; Centrone, Andrea; Haney, Paul; Kinney, R.; Szalai, Veronika; Yoon, Heayoung P.

2014-09-01T23:59:59.000Z

295

In-situ scanning probe microscopy of electrodeposited nickel.  

SciTech Connect (OSTI)

The performance characteristics and material properties such as stress, microstructure, and composition of nickel coatings and electroformed components can be controlled over a wide range by the addition of small amounts of surface-active compounds to the electroplating bath. Saccharin is one compound that is widely utilized for its ability to reduce tensile stress and refine grain size in electrodeposited nickel. While the effects of saccharin on nickel electrodeposition have been studied by many authors in the past, there is still uncertainty over saccharin's mechanisms of incorporation, stress reduction, and grain refinement. In-situ scanning probe microscopy (SPM) is a tool that can be used to directly image the nucleation and growth of thin nickel films at nanometer length scales to help elucidate saccharin's role in the development and evolution of grain structure. In this study, in-situ atomic force microscopy (AFM) and scanning tunneling microscopy (STM) techniques are used to investigate the effects of saccharin on the morphological evolution of thin nickel films. By observing mono-atomic height nickel island growth with and without saccharin present we conclude that saccharin has little effect on the nickel surface mobility during deposition at low overpotentials where the growth occurs in a layer-by-layer mode. Saccharin was imaged on Au(l11) terraces as condensed patches without resolved packing structure. AFM measurements of the roughness evolution of nickel films up to 1200 nm thick on polycrystalline gold indicate that saccharin initially increases the roughness and surface skewness of the deposit that at greater thickness becomes smoother than films deposited without saccharin. Faceting of the deposit morphology decreases as saccharin concentration increases even for the thinnest films that have 3-D growth.

Kelly, James J.; Dibble, Dean C.

2004-10-01T23:59:59.000Z

296

Linking specific heterotrophic bacterial populations to bioreduction of uranium and nitrate using stable isotope probing in contaminated subsurface sediments  

SciTech Connect (OSTI)

Shifts in terminal electron-accepting processes during biostimulation of uranium-contaminated sediments were linked to the composition of stimulated microbial populations using DNA-based stable isotope probing. Nitrate reduction preceded U(VI) and Fe(III) reduction in [{sup 13}C]ethanol-amended microcosms. The predominant, active denitrifying microbial groups were identified as members of the Betaproteobacteria, whereas Actinobacteria dominated under metal-reducing conditions.

Akob, Denise M. [Florida State University; Kerkhof, Lee [Rutgers University; Kusel, Kirsten [Friedrich Schiller University Jena, Jena Germany; Watson, David B [ORNL; Palumbo, Anthony Vito [ORNL; Kostka, Joel [Florida State University

2011-01-01T23:59:59.000Z

297

Filename: FVB Invo2 Forced 121061.CHP Probe Array Type: MG_U74Av2  

E-Print Network [OSTI]

121061.CHP Probe Array Type: MG_U74Av2 Algorithm: Statistical Probe Pair Thr: 8 Controls: Antisense.13 ______________________________________________________________________ ______________________________________________________________________ Filename: FVB Invo2 Forced 121062.CHP Probe Array Type: MG_U74Av2 Algorithm: Statistical Probe Pair Thr: 8

Betz, William J.

298

The Sun is an active, variable,  

E-Print Network [OSTI]

The Sun is an active, variable, magnetic star with oscillations on its surface and deep within its the physical processes of the Sun-Earth connection. Visit Us on the Web: Solar Terrestrial Probes Program: http://stp.gsfc.nasa.gov For More Information, See: Sun-Earth Connection: http://sec.gsfc.nasa.gov Living With a Star: http

Christian, Eric

299

Anonym activities: white-and blackhat applications  

E-Print Network [OSTI]

with ISP-s: traffic filtering, sending and detecting probe packets with an intrusion detection system (IDS blackhat ­ avoid the detection of criminal activity ­ hide crucial infrastructure such as "mothership" servers, monitoring and control servers, etc whitehat ­ protect privacy ­ fight censorship #12;3 Example

Jelasity, Márk

300

Sandia National Laboratories: scanning probe microscopy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1developmentturbineredox-active perovskiteremoving thereverse

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

In Situ Analytical Electron Microscopy for Probing Nanoscale Electrochemistry  

SciTech Connect (OSTI)

Oxides and their tailored structures are at the heart of electrochemical energy storage technologies and advances in understanding and controlling the dynamic behaviors in the complex oxides, particularly at the interfaces, during electrochemical processes will catalyze creative design concepts for new materials with enhanced and better-understood properties. Such knowledge is not accessible without new analytical tools. New innovative experimental techniques are needed for understanding the chemistry and structure of the bulk and interfaces, more importantly how they change with electrochemical processes in situ. Analytical Transmission Electron Microscopy (TEM) is used extensively to study electrode materials ex situ and is one of the most powerful tools to obtain structural, morphological, and compositional information at nanometer scale by combining imaging, diffraction and spectroscopy, e.g., EDS (energy dispersive X-ray spectrometry) and Electron Energy Loss Spectrometry (EELS). Determining the composition/structure evolution upon electrochemical cycling at the bulk and interfaces can be addressed by new electron microscopy technique with which one can observe, at the nanometer scale and in situ, the dynamic phenomena in the electrode materials. In electrochemical systems, for instance in a lithium ion battery (LIB), materials operate under conditions that are far from equilibrium, so that the materials studied ex situ may not capture the processes that occur in situ in a working battery. In situ electrochemical operation in the ultra-high vacuum column of a TEM has been pursued by two major strategies. In one strategy, a 'nano-battery' can be fabricated from an all-solid-state thin film battery using a focused ion beam (FIB). The electrolyte is either polymer based or ceramic based without any liquid component. As shown in Fig. 1a, the interfaces between the active electrode material/electrolyte can be clearly observed with TEM imaging, in contrast to the composite electrodes/electrolyte interfaces in conventional lithium ion batteries, depicted in Fig.1b, where quantitative interface characterization is extremely difficult if not impossible. A second strategy involves organic electrolyte, though this approach more closely resembles the actual operation conditions of a LIB, the extreme volatility In Situ Analytical Electron Microscopy for Probing Nanoscale Electrochemistry by Ying Shirley Meng, Thomas McGilvray, Ming-Che Yang, Danijel Gostovic, Feng Wang, Dongli Zeng, Yimei Zhu, and Jason Graetz of the organic electrolytes present significant challenges for designing an in situ cell that is suitable for the vacuum environment of the TEM. Significant progress has been made in the past few years on the development of in situ electron microscopy for probing nanoscale electrochemistry. In 2008, Brazier et al. reported the first cross-section observation of an all solid-state lithium ion nano-battery by TEM. In this study the FIB was used to make a 'nano-battery,' from an all solid-state battery prepared by pulsed laser deposition (PLD). In situ TEM observations were not possible at that time due to several key challenges such as the lack of a suitable biasing sample holder and vacuum transfer of sample. In 2010, Yamamoto et al. successfully observed changes of electric potential in an all-solid-state lithium ion battery in situ with electron holography (EH). The 2D potential distribution resulting from movement of lithium ions near the positive-electrode/electrolyte interface was quantified. More recently Huang et al. and Wang et al. reported the in situ observations of the electrochemical lithiation of a single SnO{sub 2} nanowire electrode in two different in situ setups. In their approach, a vacuum compatible ionic liquid is used as the electrolyte, eliminating the need for complicated membrane sealing to prevent the evaporation of carbonate based organic electrolyte into the TEM column. One main limitation of this approach is that EELS spectral imaging is not possible due to the high plasmon signal of the ionic li

Graetz J.; Meng, Y.S.; McGilvray, T.; Yang, M.-C.; Gostovic, D.; Wang, F.; Zeng, D.; Zhu, Y.

2011-10-31T23:59:59.000Z

302

Analysis of cylindrical Langmuir probe using experiment and different theories  

SciTech Connect (OSTI)

Cylindrical probe data have been analyzed using different theories in order to determine some plasma parameters (electron temperature and electron and ion densities). Langmuir probe data are obtained in a cylindrical DC glow discharge in the positive column plasma at argon gas pressures varied from 0.5 to 6 Torr and at constant discharge current equal to 10 mA. The electron density has calculated from the electron current at the space potential and from Orbital Motion Limited (OML) collisionless theory. Ion density has obtained from the OML analysis of the ion saturation currents. In addition, the electron temperature has measured by three different methods using probe and electrons currents. The electron temperature T{sub e}, plasma density n{sub e}, and space potential V{sub s}, have been obtained from the measured single cylindrical probe I-V characteristic curves. The radial distribution of the electron temperature and plasma density along the glow discharge are measured and discussed. Using the collisionless theories by Langmuir cylindrical probe and up to several Torr argon gas pressures the differences between the values of electron temperature and electron and ion densities stay within reasonable error limits.

Hassouba, M. A., E-mail: hassouba@yahoo.com [Benha University, Physics Department, Faculty of Science (Egypt); Galaly, A. R. [Umm Al-Qura University, Engineering Science Department, Faculty of Community (Saudi Arabia)] [Umm Al-Qura University, Engineering Science Department, Faculty of Community (Saudi Arabia); Rashed, U. M. [Alazhar University, Physics Department, Faculty of Science (Egypt)] [Alazhar University, Physics Department, Faculty of Science (Egypt)

2013-03-15T23:59:59.000Z

303

Revisiting plasma hysteresis with an electronically compensated Langmuir probe  

SciTech Connect (OSTI)

The measurement of electron temperature in plasma by Langmuir probes, using ramped bias voltage, is seriously affected by the capacitive current of capacitance of the cable between the probe tip and data acquisition system. In earlier works a dummy cable was used to balance the capacitive currents. Under these conditions, the measured capacitive current was kept less than a few mA. Such probes are suitable for measurements in plasma where measured ion saturation current is of the order of hundreds of mA. This paper reports that controlled balancing of capacitive current can be minimized to less than 20 {mu}A, allowing plasma measurements to be done with ion saturation current of the order of hundreds of {mu}A. The electron temperature measurement made by using probe compensation technique becomes independent of sweep frequency. A correction of {<=}45% is observed in measured electron temperature values when compared with uncompensated probe. This also enhances accuracy in the measurement of fluctuation in electron temperature as {delta}T{sub pk-pk} changes by {approx}30%. The developed technique with swept rate {<=}100 kHz is found accurate enough to measure both the electron temperature and its fluctuating counterpart. This shows its usefulness in measuring accurately the temperature fluctuations because of electron temperature gradient in large volume plasma device plasma with frequency ordering {<=}50 kHz.

Srivastava, P. K.; Singh, S. K.; Awasthi, L. M.; Mattoo, S. K. [Institute for Plasma Research, Gandhinagar 382 428 (India)

2012-09-15T23:59:59.000Z

304

Strategies for Probing Nanometer-Scale Electrocatalysts: From Single Particles to Catalyst-Membrane Architectures  

SciTech Connect (OSTI)

The project primary objectives are to prepare and elucidate the promoting properties of materials that possess high activity for the conversion of hydrogen and related small molecules (water, oxygen, carbon monoxide and methanol) in polymer electrolyte fuel cells. One area of research has focused on the study of catalyst materials. Protocols were developed for probing the structure and benchmarking the activity of Pt and Pt bimetallic nanometer-scale catalyst against Pt single crystal electrode standards. A second area has targeted fuel cell membrane and the advancement of simple methods mainly based on vibrational spectroscopy that can be applied broadly in the study of membrane structure and transport properties. Infrared and Raman methods combined with least-squares data modeling were applied to investigate and assist the design of robust, proton conductive membranes, which resist reactant crossover.

Korzeniewski, Carol

2014-01-20T23:59:59.000Z

305

ECO2M: A TOUGH2 Fluid Property Module for Mixtures of Water, NaCl, and CO2, Including Super- and Sub-Critical Conditions, and Phase Change Between Liquid and Gaseous CO2  

SciTech Connect (OSTI)

ECO2M is a fluid property module for the TOUGH2 simulator (Version 2.0) that was designed for applications to geologic storage of CO{sub 2} in saline aquifers. It includes a comprehensive description of the thermodynamics and thermophysical properties of H{sub 2}O - NaCl - CO{sub 2} mixtures, that reproduces fluid properties largely within experimental error for temperature, pressure and salinity conditions in the range of 10 C {le} T {le} 110 C, P {le} 600 bar, and salinity from zero up to full halite saturation. The fluid property correlations used in ECO2M are identical to the earlier ECO2N fluid property package, but whereas ECO2N could represent only a single CO{sub 2}-rich phase, ECO2M can describe all possible phase conditions for brine-CO{sub 2} mixtures, including transitions between super- and sub-critical conditions, and phase change between liquid and gaseous CO{sub 2}. This allows for seamless modeling of CO{sub 2} storage and leakage. Flow processes can be modeled isothermally or non-isothermally, and phase conditions represented may include a single (aqueous or CO{sub 2}-rich) phase, as well as two-and three-phase mixtures of aqueous, liquid CO{sub 2} and gaseous CO{sub 2} phases. Fluid phases may appear or disappear in the course of a simulation, and solid salt may precipitate or dissolve. TOUGH2/ECO2M is upwardly compatible with ECO2N and accepts ECO2N-style inputs. This report gives technical specifications of ECO2M and includes instructions for preparing input data. Code applications are illustrated by means of several sample problems, including problems that had been previously solved with TOUGH2/ECO2N.

Pruess, K.

2011-04-01T23:59:59.000Z

306

Probe of New Physics using Precision Measurement of the Electron Magnetic Moment  

E-Print Network [OSTI]

The anomalous magnetic moment of the electron is determined experimentally with an accuracy of $2.8\\times 10^{-13}$ and the uncertainty may decrease by an order of magnitude in the future. While the current data is in excellent agreement with the standard model, the possible future improvement in the error in $\\Delta a_e= a_e^{\\text{exp}}- a_e^{\\text{theory}}$ has recently drawn interest in the electron anomalous magnetic moment as a possible probe of new physics beyond the standard model. In this work we give an analysis of such physics in an extension of the minimal supersymmetric standard model with a vector multiplet. In the extended model the electroweak contribution to the anomalous magnetic moment of the electron include loop diagrams involving in addition to the exchange of W and Z, the exchange of charginos, sneutrinos and mirror sneutrinos, and the exchange of neutralinos, sleptons and mirror sleptons. The analysis shows that a contribution to the electron magnetic moment much larger than expected by $m_e^2/m_\\mu^2$ scaling of the deviation of the muon anomalous magnetic moment over the standard model prediction, i.e., $\\Delta a_\\mu = 3 \\times 10^{-9}$ as given by the Brookhaven experiment, can be gotten within the MSSM extension. Effects of CP violating phases in the extended MSSM model on the corrections to the supersymmetric electroweak contributions to $a_e$ are also investigated. The analysis points to the possibility of detection of new physics effects with modest improvement on the error in $\\Delta a_e= a_e^{\\text{exp}} - a_e^{\\text{theory}}$.

Amin Aboubrahim; Tarek Ibrahim; Pran Nath

2014-05-06T23:59:59.000Z

307

Very high energy probes of the quark-gluon plasma  

SciTech Connect (OSTI)

Among the penetrating probes of nuclear matter the most frequently discussed have been those which involve the detection of photons or leptons with m/sub T/ approx. = P/sub T/ < 3 GeV. This is the expected range of emission from a hot, thermalized plasma of quarks and gluons. The suggestion has been made that in very high energy collisions of nuclei the properties of high P/sub T/ jets may also reflect the characteristics of the nuclear medium through which the parent partons have propagated just after the collision. In this note we expand on the possible uses of such a probe.

Ludlam, T.; Paige, F.; Madansky, L.

1984-01-01T23:59:59.000Z

308

Probing Uranium's Mysteries | Y-12 National Security Complex  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home DesignPresentationsSRS Responds toPrivacyProbingProbing Uranium's

309

Probing Valance and Core Excitons in Molecules by Coherent Multidimensional  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home DesignPresentationsSRS Responds toPrivacyProbingProbing

310

Probing Core-Hole Localization in Molecular Nitrogen  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FORPoints of Contact Privacy PointsProbingProbing

311

Probing Strain-Induced Changes in Electronic Structure with XMCD  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FORPoints of ContactLiquidProbingProbing

312

Analyte detection using an active assay  

DOE Patents [OSTI]

Analytes using an active assay may be detected by introducing an analyte solution containing a plurality of analytes to a lacquered membrane. The lacquered membrane may be a membrane having at least one surface treated with a layer of polymers. The lacquered membrane may be semi-permeable to nonanalytes. The layer of polymers may include cross-linked polymers. A plurality of probe molecules may be arrayed and immobilized on the lacquered membrane. An external force may be applied to the analyte solution to move the analytes towards the lacquered membrane. Movement may cause some or all of the analytes to bind to the lacquered membrane. In cases where probe molecules are presented, some or all of the analytes may bind to probe molecules. The direction of the external force may be reversed to remove unbound or weakly bound analytes. Bound analytes may be detected using known detection types.

Morozov, Victor (Manassas, VA); Bailey, Charles L. (Cross Junction, VA); Evanskey, Melissa R. (Potomac Falls, VA)

2010-11-02T23:59:59.000Z

313

Measurement of effective sheath width around cutoff probe in low-pressure plasmas  

SciTech Connect (OSTI)

Previous studies indicated that the measurement results of microwave probes can be improved by applying the adequate sheath width to their measurement models, and consequently the sheath width around the microwave probe tips has become very important information for microwave probe diagnostics. In this paper, we propose a method for measuring the argon plasma sheath width around the cutoff probe tips by applying the circuit model to the cutoff probe phase spectrum. The measured sheath width of the cutoff probe was found to be in good agreement with the floated sheath width calculated from the Child-Langmuir sheath law. The physical reasons for a discrepancy between the two measurements are also discussed.

Kim, D. W.; Oh, W. Y. [Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Daejeon 305-701 (Korea, Republic of)] [Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Daejeon 305-701 (Korea, Republic of); You, S. J., E-mail: sjyou@kriss.re.kr; Kim, J. H. [Center for Vacuum Technology, Korea Research Institute of Standards and Science, Daejeon 305-306 (Korea, Republic of)] [Center for Vacuum Technology, Korea Research Institute of Standards and Science, Daejeon 305-306 (Korea, Republic of); Chang, H. Y. [Department of Physics, Korea Advanced Institute of Science and Technology, Daejeon 305-701 (Korea, Republic of)] [Department of Physics, Korea Advanced Institute of Science and Technology, Daejeon 305-701 (Korea, Republic of)

2014-05-15T23:59:59.000Z

314

Development of Micromachined Probes for Bio-Nano Applications  

E-Print Network [OSTI]

. A scanning electron micrograph showing the existence of a wear scar on the scanning probe tip after writing. ........................................ 51 Figure 32. Computer images reconstructed from AFM measurement results showing the formation...? tips. .......................................................................................... 56 xi Page Figure 35. An illustration of the controllable process for the formation of variable sized cavities based on bulk micromachining of an SOI...

Yapici, Murat K.

2010-01-14T23:59:59.000Z

315

Probing Metagenomics by Rapid Cluster Analysis of Very Large Datasets  

E-Print Network [OSTI]

Probing Metagenomics by Rapid Cluster Analysis of Very Large Datasets Weizhong Li1 , John C. Wooley PLoS Biol 5, e16). Such datasets, not only by their sheer size, but also by many other features, defy datasets by advanced clustering strategies using the newly modified CD-HIT algorithm. We performed

Weitz, Joshua S.

316

TIME/SPACE-PROBING INTERFEROMETER FOR PLASMA DIAGNOSTICS  

E-Print Network [OSTI]

#12;TIME/SPACE-PROBING INTERFEROMETER FOR PLASMA DIAGNOSTICS V. A. Manasson, A. Avakian, A in plasma diagnostics tomography. We have built a prototype of the new interferometer, which is planned - Ã?- cm . The new instrument can find applications in plasma diagnostics in scientific research as well

California at Los Angles, University of

317

Methods for making nucleotide probes for sequencing and synthesis  

DOE Patents [OSTI]

Compositions and methods for making a plurality of probes for analyzing a plurality of nucleic acid samples are provided. Compositions and methods for analyzing a plurality of nucleic acid samples to obtain sequence information in each nucleic acid sample are also provided.

Church, George M; Zhang, Kun; Chou, Joseph

2014-07-08T23:59:59.000Z

318

Compact endocavity diagnostic probes for nuclear radiation detection  

DOE Patents [OSTI]

This invention relates to the field of radiation imaging. In particular, the invention relates to an apparatus and a method for imaging tissue or an inanimate object using a novel probe that has an integrated solid-state semiconductor detector and complete readout electronics circuitry.

Cui, Yonggang; James, Ralph; Bolotnikov, Aleksey

2014-08-26T23:59:59.000Z

319

Probing the Intrinsic Properties of Exfoliated Graphene: Raman  

E-Print Network [OSTI]

Probing the Intrinsic Properties of Exfoliated Graphene: Raman Spectroscopy of Free-standing graphene monolayers prepared by mechanical exfoliation of graphite are investigated. The graphene,7 or to solubilize macroscopic quantities of graphene,8 mechanical exfoliation of graphite9 currently remains

Heinz, Tony F.

320

Probing polymerization forces by using actin-propelled lipid vesicles  

E-Print Network [OSTI]

Probing polymerization forces by using actin-propelled lipid vesicles Arpita Upadhyaya, Jeffrey R) Actin polymerization provides a powerful propulsion force for numerous types of cell motility. Although the polymerization forces quantitatively, we introduce an experimental system in which lipid vesicles coated

van Oudenaarden, Alexander

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Probe for high resolution NMR with sample reorientation  

DOE Patents [OSTI]

An improved NMR probe and method are described which substantially improve the resolution of NMR measurements made on powdered or amorphous or otherwise orientationally disordered samples. The apparatus mechanically varies the orientation of the sample such that the time average of two or more sets of spherical harmonic functions are zero.

Pines, Alexander (Berkeley, CA); Samoson, Ago (Tallinn, SU)

1990-01-01T23:59:59.000Z

322

Probe for high resolution NMR with sample reorientation  

DOE Patents [OSTI]

An improved NMR probe and method are described which substantially improve the resolution of NMR measurements made on powdered or amorphous or otherwise orientationally disordered samples. The apparatus mechanically varies the orientation of the sample such that the time average of two or more sets of spherical harmonic functions are zero. 8 figs.

Pines, A.; Samoson, A.

1990-02-06T23:59:59.000Z

323

Note: Folded optical system for narrow forward looking probe  

SciTech Connect (OSTI)

An optical system is described in which a laser beam makes three passes through a single graded index lens, forming a focus along the optic axis. It has important applications in endoscopic probes, where the forward looking characteristic permits the avoidance of obstacles and the narrow structure makes it minimally invasive.

Hou, Hsuan-Chao; Hah, Dooyoung; Kim, Jeonghwan; Feldman, M., E-mail: mfeldm1@lsu.edu [Division of Electrical and Computer Engineering, Louisiana State University, Baton Rouge, Louisiana 70803 (United States)

2014-02-15T23:59:59.000Z

324

Construction and testing of a flue-gas corrosion probe  

SciTech Connect (OSTI)

The selection of suitable materials for industrial, waste-heat- recovery systems requires assessment of corrosion of materials in various flue-gas environments. Such assessments involve exposing candidate materials to high-temperature flue gases and analyzing the effects of the exposure conditions. Because corrosion is related to flue-gas chemical composition and temperature, variations in temperature complicate the determination of corrosion rates and corrosion mechanisms. Conversely, a relatively constant temperature allows a more accurate determination of the effects of exposure conditions. For this reason, controlled-temperature flue-gas corrosion probes were constructed and tested for exposure tests of materials. A prototype probe consisted of a silicon carbide tube specimen, supporting hardware, and instrumentation for controlling temperature by internal heating and cooling. An advanced probe included other tubular specimens. Testing of the probes in an industrial-type furnace at a nominal flue-gas temperature of 1200{degree}C revealed that temperature control was inadequate. The cooling mode imposed a substantial axial-temperature gradient on the specimens; while the heating mode imposed a smaller gradient, the heating capacity was very limited. 10 refs., 10 figs., 2 tabs.

Federer, J.I.; McEvers, J.A.

1990-08-01T23:59:59.000Z

325

Proximal Probes based Nanorobotic Drawing of Polymer Micro/Nanofibers  

E-Print Network [OSTI]

1 Proximal Probes based Nanorobotic Drawing of Polymer Micro/Nanofibers Amrinder S. Nain, Cristina cantilevers, custom 3D fibers, and fiber networks, are proposed to be fabricated. Poly(methyl methacrylate with diameters from few microns to 200 nm. Fabrication of crossed and linear networks of fibers is also

Sitti, Metin

326

Probing and Controlling Photothermal Heat Generation in Plasmonic Nanostructures  

E-Print Network [OSTI]

thermal hotspots. In the present study, new methods for designing and thermally probing thermoplasmonic suitable for heat generation compared with its more well-known complementary structure, the bow-tie antenna. We also demonstrate that highly localized and enhanced thermal hot spots can be realized

Simaan, Nabil

327

Rotary union for use with ultrasonic thickness measuring probe  

DOE Patents [OSTI]

A rotary union for rotatably supporting an ultrasonic probe operable to nondestructively measure the thickness of steam generator tubes to determine the amount of corrosion experienced by the tubes includes a stationary body having a bore therethrough and an outlet drain, and a fitting rotatably mounted within the upper end of the body. The fitting has a bore aligned with the bore of the body. An electrical cable positioned within a water supply tube in an annular arrangement passes through the bore of the body and the bore of the fitting. This annular arrangement, in turn, is positioned within a connector element which extends outwardly from the fitting bore and is connected to the ultrasonic probe. An elastomeric lower bushing seals the annular arrangement to the lower end of the rotary union body and an elastomeric upper bushing seals the connector element to the fitting to permit the connector element and the ultrasonic probe connected thereto to rotate with the fitting relative to the body. The lower and upper bushings permit water to be passed through the annular arrangement and into the ultrasonic probe and thereafter discharged between the annular arrangement and the connector element to the outlet drain of the rotary union body. 5 figs.

Nachbar, H.D.

1992-09-15T23:59:59.000Z

328

Technical Note Ultrasound Probe with Integrated ECG Lead: Feasibility Study  

E-Print Network [OSTI]

Technical Note Ultrasound Probe with Integrated ECG Lead: Feasibility Study ARCHANA RAMIREDDY 27708 stephen.w.smith@duke.edu We integrated electrocardiogram (ECG) leads onto the face of a cardiac of devices needed to col- lect cardiac information. Since the ECG leads were not placed on their standard

Smith, Stephen

329

Estrogen-Related Receptor A1 Transcriptional Activities Are Regulated in Part via the ErbB2/HER2  

E-Print Network [OSTI]

MCF-7 mammary carcinoma cells, and (b) ERRA and ErbB2 mRNA levels positively correlate in clinical breast tumors. We show here that ERRA1 represses ERA-mediated activation in MCF-7 cells because it failed plasmids. Importantly, overexpression of activated ErbB2 in MCF-7 cells led to transcriptional activation

Mertz, Janet E.

330

Modeling of current characteristics of segmented Langmuir probe on DEMETER  

SciTech Connect (OSTI)

We model the current characteristics of the DEMETER Segmented Langmuir probe (SLP). The probe is used to measure electron density and temperature in the ionosphere at an altitude of approximately 700 km. It is also used to measure the plasma flow velocity in the satellite frame of reference. The probe is partitioned into seven collectors: six electrically insulated spherical segments and a guard electrode (the rest of the sphere and the small post). Comparisons are made between the predictions of the model and DEMETER measurements for actual ionospheric plasma conditions encountered along the satellite orbit. Segment characteristics are computed numerically with PTetra, a three-dimensional particle in cell simulation code. In PTetra, space is discretized with an unstructured tetrahedral mesh, thus, enabling a good representation of the probe geometry. The model also accounts for several physical effects of importance in the interaction of spacecraft with the space environment. These include satellite charging, photoelectron, and secondary electron emissions. The model is electrostatic, but it accounts for the presence of a uniform background magnetic field. PTetra simulation results show different characteristics for the different probe segments. The current collected by each segment depends on its orientation with respect to the ram direction, the plasma composition, the magnitude, and the orientation of the magnetic field. It is observed that the presence of light H{sup +} ions leads to a significant increase in the ion current branch of the I-V curves of the negatively polarized SLP. The effect of the magnetic field is demonstrated by varying its magnitude and direction with respect to the reference magnetic field. It is found that the magnetic field appreciably affects the electron current branch of the I-V curves of certain segments on the SLP, whereas the ion current branch remains almost unaffected. PTetra simulations are validated by comparing the computed characteristics and their angular anisotropy with the DEMETER measurements, as simulation results are found to be in good agreement with the measurements.

Imtiaz, Nadia; Marchand, Richard [Department of Physics, University of Alberta, Edmonton, Alberta T6G 2E1 (Canada)] [Department of Physics, University of Alberta, Edmonton, Alberta T6G 2E1 (Canada); Lebreton, Jean-Pierre [Laboratoire de Physique et Chimie de l'Environnement et de l'Espace (LPC2E), CNRS-Université d'Orléans, Orléans Cedex (France)] [Laboratoire de Physique et Chimie de l'Environnement et de l'Espace (LPC2E), CNRS-Université d'Orléans, Orléans Cedex (France)

2013-05-15T23:59:59.000Z

331

Probing thermonuclear supernova explosions with neutrinos  

E-Print Network [OSTI]

Aims: We present neutrino light curves and energy spectra for two representative type Ia supernova explosion models: a pure deflagration and a delayed detonation. Methods: We calculate the neutrino flux from $\\beta$ processes using nuclear statistical equilibrium abundances convoluted with approximate neutrino spectra of the individual nuclei and the thermal neutrino spectrum (pair+plasma). Results: Although the two considered thermonuclear supernova explosion scenarios are expected to produce almost identical electromagnetic output, their neutrino signatures appear vastly different, which allow an unambiguous identification of the explosion mechanism: a pure deflagration produces a single peak in the neutrino light curve, while the addition of the second maximum characterizes a delayed-detonation. We identified the following main contributors to the neutrino signal: (1) weak electron neutrino emission from electron captures (in particular on the protons Co55 and Ni56) and numerous beta-active nuclei produced by the thermonuclear flame and/or detonation front, (2) electron antineutrinos from positron captures on neutrons, and (3) the thermal emission from pair annihilation. We estimate that a pure deflagration supernova explosion at a distance of 1 kpc would trigger about 14 events in the future 50 kt liquid scintillator detector and some 19 events in a 0.5 Mt water Cherenkov-type detector. Conclusions: While in contrast to core-collapse supernovae neutrinos carry only a very small fraction of the energy produced in the thermonuclear supernova explosion, the SN Ia neutrino signal provides information that allows us to unambiguously distinguish between different possible explosion scenarios. These studies will become feasible with the next generation of proposed neutrino observatories.

A. Odrzywolek; T. Plewa

2011-03-27T23:59:59.000Z

332

The Electric Field and Waves Instruments on the Radiation Belt Storm Probes Mission  

E-Print Network [OSTI]

The Electric Fields and Waves (EFW) Instruments on the two Radiation Belt Storm Probe (RBSP) spacecraft (recently renamed the Van Allen Probes) are designed to measure three dimensional quasi-static and low frequency ...

Wygant, J. R.

333

E-Print Network 3.0 - amplitude modulated probes Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

40,JuiZZet 2979, page C7-807 FINITE THICKNESS EFFECT OF PROBE SHEATHI N RADIO-FREQUENCY PLASMA PROBE DIAGNOSTICS Summary: -amplitude of electron oscillation i n plasma.Setting...

334

Tip-Enhanced Near-Field Raman Spectroscopy Probing Single Dye...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Tip-Enhanced Near-Field Raman Spectroscopy Probing Single Dye-Sensitized TiO2 Nanoparticles. Tip-Enhanced Near-Field Raman Spectroscopy Probing Single Dye-Sensitized TiO2...

335

E-Print Network 3.0 - array aperture probes Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

29 NEAR-FIELD SCANNING OPTICAL MICRO PROBE INTEGRATED WITH ANANOMETER-SIZED LIGHT EMITTING DIODE Summary: apertures2,3 and probes with a light absorbing gold particle or a...

336

E-Print Network 3.0 - attached vibrational probe Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 NEAR-FIELD SCANNING OPTICAL MICRO PROBE INTEGRATED WITH ANANOMETER-SIZED LIGHT EMITTING DIODE Summary: to 93KHz with the probe attached. As the tip approaches the surface of...

337

The Architecture of the Qo Site of Cytochrome bc1 Complex Probed...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Architecture of the Qo Site of Cytochrome bc1 Complex Probed by Superoxide Production. The Architecture of the Qo Site of Cytochrome bc1 Complex Probed by Superoxide Production....

338

Development of a microfluidic device for patterning multiple species by scanning probe lithography  

E-Print Network [OSTI]

Scanning Probe Lithography (SPL) is a versatile nanofabrication platform that leverages microfluidic “ink” delivery systems with Scanning Probe Microscopy (SPM) for generating surface-patterned chemical functionality on the sub-100 nm length scale...

Rivas Cardona, Juan Alberto

2009-06-02T23:59:59.000Z

339

Seminaphthofluorescein-Based Fluorescent Probes for Imaging Nitric Oxide in Live Cells  

E-Print Network [OSTI]

Fluorescent turn-on probes for nitric oxide based on seminaphthofluorescein scaffolds were prepared and spectroscopically characterized. The Cu(II) complexes of these fluorescent probes react with NO under anaerobic ...

Pluth, Michael D.

340

Type IIP supernovae as cosmological probes: A SEAM distance to SN 1999em  

E-Print Network [OSTI]

Type IIP Supernovae as Cosmological Probes: A SEAM Distanceintrinsic brightness, supernovae make excellent cosmologicalstars: atmospheres — supernovae: 1999em Distances from

Baron, E.; Nugent, Peter E.; Branch, David; Hauschildt, Peter H.

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Detection of secondary phases in duplex stainless steel by magnetic force microscopy and scanning Kelvin probe force microscopy  

SciTech Connect (OSTI)

The secondary phase transformations in a commercial super duplex stainless steel were investigated by micro-chemical analyses and high resolution scanning probe microscopy. Energy dispersive X-ray and electron probe detected ferrite and austenite as well as secondary phases in unetched aged duplex stainless steel type 25Cr-7Ni-3Mo. Volta potential indicated that nitride and sigma appeared more active than ferrite, while secondary austenite and austenite presented a nobler potential. Reversal order in nobility is thought to be attributable to the potential ranking provided by oxide nature diversity as a result of secondary phase surface compositions on steel. After eutectoid transformation, secondary austenite was detected by electron probe microanalysis, whereas atomic force microscopy distinguished this phase from former austenite by image contrast. Magnetic force microscopy revealed a “ghosted” effect on the latter microstructure probably derived from metal memory reminiscence of mechanical polishing at passivity and long range magnetic forces of ferrite phase. - Highlights: • Nobility detection of secondary phases by SKPFM in DSS particles is not a straightforward procedure. • As Volta potential and contrast are not always consistent SKPFM surface oxides is thought played an important role in detection. • AFM distinguished secondary austenite from former austenite by image contrast though SEM required EPMA.

Ramírez-Salgado, J. [Instituto Mexicano del Petróleo, Dirección de Investigación y Posgrado, Eje Central Norte Lázaro Cárdenas, No. 152, 07730 D.F., México (Mexico); Domínguez-Aguilar, M.A., E-mail: madoming@imp.mx [Instituto Mexicano del Petróleo, Dirección de Investigación y Posgrado, Eje Central Norte Lázaro Cárdenas, No. 152, 07730 D.F., México (Mexico); Castro-Domínguez, B. [University of Tokyo, Department of Chemical System Engineering, Faculty of Engineering Bldg. 5, 7F 722, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113–8656 (Japan); Hernández-Hernández, P. [Instituto Mexicano del Petróleo, Dirección de Investigación y Posgrado, Eje Central Norte Lázaro Cárdenas, No. 152, 07730 D.F., México (Mexico); Newman, R.C. [University of Toronto, Department of Chemical Engineering and Applied Chemistry, 200 College Street, Toronto M5S 3E5 (Canada)

2013-12-15T23:59:59.000Z

342

Hybridization-based biosensor containing hairpin probes and use thereof  

DOE Patents [OSTI]

A sensor chip that includes: a fluorescence quenching surface; a nucleic acid probe that contains first and second ends with the first end bound to the fluorescence quenching surface, and is characterized by being able to self-anneal into a hairpin conformation; and a first fluorophore bound to the second end of the first nucleic acid molecule. When the first nucleic acid molecule is in the hairpin conformation, the fluorescence quenching surface substantially quenches fluorescent emissions by the first fluorophore; and when the first nucleic acid molecule is in a non-hairpin conformation, fluorescent emissions by the fluorophore are substantially free of quenching by the fluorescence quenching surface. Various nucleic acid probes, methods of making the sensor chip, biological sensor devices that contain the sensor chip, and their methods of use are also disclosed.

Miller, Benjamin L. (Penfield, NY); Strohsahl, Christopher M. (Rochester, NY)

2010-10-12T23:59:59.000Z

343

The Future of Hard and Electromagnetic Probes at RHIC  

E-Print Network [OSTI]

Potential near- and long-term physics opportunities with jets, heavy flavors and electromagnetic probes at the Relativistic Heavy Ion Collider (RHIC) are presented. Much new physics remains to be unveiled using these probes, due to their sensitivity to the initial high density stage of RHIC collisions, when quark-gluon plasma (QGP) formation is expected. Additional physics will include addressing deconfinement, chiral symmetry restoration, properties of the strongly-coupled QGP and a possible weakly-interacting QGP, color glass condensate in the initial state, and hadronization. To fully realize the physics prospects of the RHIC energy regime, new detector components must be added to existing experiments, the RHIC machine luminosity upgraded, and a possible new detector with significantly extended coverage and capabilities added.

John W. Harris

2005-03-18T23:59:59.000Z

344

“Hard probes” of strongly-interacting atomic gases  

SciTech Connect (OSTI)

We investigate properties of an energetic atom propagating through strongly interacting atomic gases. The operator product expansion is used to systematically compute a quasiparticle energy and its scattering rate both in a spin-1/2 Fermi gas and in a spinless Bose gas. Reasonable agreement with recent quantum Monte Carlo simulations even at a relatively small momentum k/kF > 1.5 indicates that our large-momentum expansions are valid in a wide range of momentum. We also study a differential scattering rate when a probe atom is shot into atomic gases. Because the number density and current density of the target atomic gas contribute to the forward scattering only, its contact density (measure of short-range pair correlation) gives the leading contribution to the backward scattering. Therefore, such an experiment can be used to measure the contact density and thus provides a new local probe of strongly interacting atomic gases.

Nishida, Yusuke [Los Alamos National Laboratory

2012-06-18T23:59:59.000Z

345

Probing cosmic acceleration by using the SNLS3 SNIa dataset  

SciTech Connect (OSTI)

We probe the cosmic acceleration by using the recently released SNLS3 sample of 472 type Ia supernovae. Combining this type Ia supernovae dataset with the cosmic microwave background anisotropy data from the Wilkinson Microwave Anisotropy Probe 7-yr observations, the baryon acoustic oscillation results from the Sloan Digital Sky Survey data release 7, and the Hubble constant measurement from the Wide Field Camera 3 on the Hubble Space Telescope, we measure the dark energy equation of state w and the deceleration parameter q as functions of redshift by using the Chevallier-Polarski-Linder parametrization. Our result is consistent with a cosmological constant at 1? confidence level, without evidence for the recent slowing down of the cosmic acceleration. Furthermore, we consider three binned parametrizations (w is piecewise constant in redshift z) based on different binning methods. The similar results are obtained, i.e., the ?CDM model is still nicely compatible with current observations.

Li, Xiao-Dong; Wang, Shuang; Zhang, Wen-Shuai [Department of Modern Physics, University of Science and Technology of China, Hefei 230026 (China); Li, Song; Huang, Qing-Guo; Li, Miao, E-mail: renzhe@mail.ustc.edu.cn, E-mail: sli@itp.ac.cn, E-mail: swang@mail.ustc.edu.cn, E-mail: wszhang@mail.ustc.edu.cn, E-mail: huangqg@itp.ac.cn, E-mail: mli@itp.ac.cn [Institute of Theoretical Physics, Chinese Academy of Science, Beijing 100080 (China)

2011-07-01T23:59:59.000Z

346

Probing WWgamma coupling through e gamma --> nu W at ILC  

E-Print Network [OSTI]

The anomalous WWgamma coupling is probed through e gamma--> nu W at the ILC. With a spectacular single lepton final state, this process is well suited to study the above coupling. Within the narrow-width approximation, a semi-analytical study of the secondary lepton energy-angle double distribution is performed. Cross section measurements can probe delta-kappa-gamma to about +/- 0.004 for a luminosity of 100 /fb at 500 GeV center of mass energy with unpolarised electron beam. The limits derivable on lambda-gamma are comparatively more relaxed. These limits can be improved significantly by considering the angle and energy distributions of the final state muon. More importantly, the angular distributions at fixed energy values, and energy distribution at fixed angles present very interesting possibility of distinguishing the case of lambda-gamma=0, lambda-gamma 0.

Kumar, Satendra

2015-01-01T23:59:59.000Z

347

Transpiring purging access probe for particulate laden or hazardous environments  

DOE Patents [OSTI]

An access probe for remote-sensing access through a viewing port, viewing volume, and access port into a vessel. The physical boundary around the viewing volume is partially formed by a porous sleeve lying between the viewing volume and a fluid conduit. In a first mode of operation, a fluid supplied to the fluid conduit encounters the porous sleeve and flows through the porous material to maintain the viewing volume free of ash or other matter. When additional fluid force is needed to clear the viewing volume, the pressure of the fluid flow is increased sufficiently to slidably translate the porous sleeve, greatly increasing the flow into the viewing volume. The porous sleeve is returned to position by an actuating spring. The access probe thereby provides for alternate modes of operation based on the pressure of an actuating fluid.

VanOsdol, John G

2013-12-03T23:59:59.000Z

348

Probing the Temperature Profile of Energy Production in the Sun  

E-Print Network [OSTI]

The particle kinetic energies of pp fusion in the sun (Gamow Energy) produce small changes in the energies of pp solar neutrinos relative to those due only to exothermal energetics. Observation of this effect may be possible via the unique tools of the upcoming LENS solar neutrino detector. The temperature profile of energy production in the sun may thus be directly probed for the first time.

Christian Grieb; R. S. Raghavan

2006-09-04T23:59:59.000Z

349

Probing the Kondo Lattice Model with Alkaline Earth Atoms  

E-Print Network [OSTI]

We study transport properties of alkaline-earth atoms governed by the Kondo Lattice Hamiltonian plus a harmonic confining potential, and suggest simple dynamical probes of several different regimes of the phase diagram that can be implemented with current experimental techniques. In particular, we show how Kondo physics at strong coupling, low density, and in the heavy fermion phase is manifest in the dipole oscillations of the conduction band upon displacement of the trap center.

Michael Foss-Feig; Michael Hermele; Ana Maria Rey

2009-12-24T23:59:59.000Z

350

Probing the switching mechanism in ZnO nanoparticle memristors  

E-Print Network [OSTI]

a cryostat (Oxford Instruments, Optistat CF). After reflection from the back contact of the sample (45o incident angle), the probe beam was incident on a silicon photodiode connected via a current-to-voltage converter to a dual-channel lock... . In this case, although the height of barrier decreases, the charge injection through the barrier shifts 7 from a tunneling mechanism to thermionic emission.24 Furthermore, the hopping mechanism dominates the charge transport inside the film, due...

Li, C.; Beirne, G. J.; Kamita, G.; Lakhwani, G.; Wang, J.; Greenham, N. C.

2014-01-01T23:59:59.000Z

351

High temperature electrochemical corrosion rate probes for combustion environments  

SciTech Connect (OSTI)

Electrochemical corrosion rate probes have been constructed and tested along with mass loss coupons in an air plus water vapor and a N2/O2/CO2 plus water vapor environment. Temperatures ranged from 200? to 700?C. Results show that electrochemical corrosion rates for ash-covered mild steel are a function of time, temperature and process environment. Correlation between the electrochemical and mass loss corrosion rates was poor.

Covino, Bernard S., Jr.; Bullard, Sophie J.; Cramer, Stephen D.; Holcomb, Gordon R.; Ziomek-Moroz, Margaret; Eden, David A. (Intercorr International Inc.); Kane, Russell D. (Intercorr International Inc.); Eden, Dawn C. (Intercorr International Inc.)

2004-01-01T23:59:59.000Z

352

Nitride semiconductors studied by atom probe tomography and correlative techniques  

E-Print Network [OSTI]

Atom Maps of the SLs ................................................... 107 5.4.1.2. Existence of Clustering .......................................................................... 110 Contents ix 5.4.1.3. Mg Content of the SL... .; Barnard, J. S.; Humphreys, C. J.; Oliver, R. A., Atom probe extended to AlGaN: three-dimensional imaging of a Mg-doped AlGaN/GaN superlattice. Physica Status Solidi C 2010, 7, 1781- 1783. Bennett, S. E.; Holec, D.; Kappers, M. J.; Humphreys, C. J...

Bennett, Samantha

2011-02-08T23:59:59.000Z

353

Bose-Einstein Condensates as a Probe for Lorentz Violation  

E-Print Network [OSTI]

The effects of small Lorentz-violating terms on Bose-Einstein condensates are analyzed. We find that there are changes to the phase and shape of the ground-state wave function that vary with the orientation of the trap. In addition, spin-couplings can act as a source for spontaneous symmetry breaking in ferromagnetic condensates making them sensitive probes for fundamental symmetry violation.

Don Colladay; Patrick McDonald

2006-02-08T23:59:59.000Z

354

Gamma-ray Bursts as Probes of Galaxy Evolution  

E-Print Network [OSTI]

Gamma-ray Bursts as Probes of Galaxy Evolution Daniele Malesani, Dark Cosmology Centre and the X of the "Universe") #12;What is a gamma-ray burst? Brief (ms - min) and intense (~10-7 erg cm­2 s­1 ) burst of soft to ongoing star formation "Naked-eye" GRB 080319B GRBs explode within star-forming galaxies Gamma-ray bursts

Â?umer, Slobodan

355

Pump probe spectroscopy of quasiparticle dynamics in cuprate superconductors  

SciTech Connect (OSTI)

Pump probe spectroscopy is used to examine the picosecond response of a BSCCO thin film, and two YBCO crystals in the near infrared. The role of pump fluence and temperature have been closely examined in an effort to clarify the mechanism by which the quasiparticles rejoin the condensate. BSCCO results suggest that the recombination behavior is consistent with the d-wave density of states in that quasiparticles appear to relax to the nodes immediately before they rejoin the condensate. The first substantial investigation of polarized pump probe response in detwinned YBCO crystals is also reported. Dramatic doping dependent anisotropies along the a and b axes are observed in time and temperature resolved studies. Among many results, we highlight the discovery of an anomalous temperature and time dependence of a- axis response in optimally doped YBCO. We also report on the first observation of the photoinduced response in a magnetic field. We find the amplitude of the response, and in some cases, the dynamics considerably changed with the application of a 6T field. Finally, we speculate on two of the many theoretical directions stimulated by our results. We find that the two-fluid model suggests a mechanism to explain how changes at very low energies are visible to a high-energy probe. Also discussed are basic recombination processes which may play a role in the observed decay.

Segre, Gino P.

2001-05-01T23:59:59.000Z

356

Eddy current probe and method for flaw detection in metals  

DOE Patents [OSTI]

A flaw detecting system is shown which includes a probe having a pair of ferrite cores with in-line gaps in close proximity to each other. An insulating, non-magnetic, non-conducting holder fills the gaps and supports the ferrite cores in a manner such that the cores form a generally V-shape. Each core is provided with an excitation winding and a detection winding. The excitation windings are connected in series or parallel with an rf port for connection thereof to a radio frequency source. The detection windings, which are differentially wound, are connected in series circuit to a detector port for connection to a voltage measuring instrument. The ferrite cores at the in-line gaps directly engage the metal surface of a test piece, and the probe is scanned along the test piece. In the presence of a flaw in the metal surface the detection winding voltages are unbalanced, and the unbalance is detected by the voltage measuring instrument. The insulating holder is provided with a profile which conforms to that of a prominent feature of the test piece to facilitate movement of the probe along the feature, typically an edge or a corner.

Watjen, John P. (Sunnyvale, CA)

1987-06-23T23:59:59.000Z

357

Eddy current probe and method for flaw detection in metals  

DOE Patents [OSTI]

A flaw detecting system is shown which includes a probe having a pair of ferrite cores with in-line gaps in close proximity to each other. An insulating, non-magnetic, non-conducting holder fills the gaps and supports the ferrite cores in a manner such that the cores form a generally V-shape. Each core is provided with an excitation winding and a detection winding. The excitation windings are connected in series or parallel with an rf port for connection thereof to a radio frequency source. The detection windings, which are differentially wound, are connected in series circuit to a detector port for connection to a voltage measuring instrument. The ferrite cores at the in-line gaps directly engage the metal surface of a test piece, and the probe is scanned along the test piece. In the presence of a flaw in the metal surface the detection winding voltages are unbalanced, and the unbalance is detected by the voltage measuring instrument. The insulating holder is provided with a profile which conforms to that of a prominent feature of the test piece to facilitate movement of the probe along the feature, typically an edge or a corner. 9 figs.

Watjen, J.P.

1987-06-23T23:59:59.000Z

358

Design and Spacecraft-Integration of RTGs for Solar Probe  

SciTech Connect (OSTI)

Presented at the 41st Congress of the IAF, October 6-12, 1990 in Dresden, FRG. The paper describes the design and analysis of Radioisotope Thermoelectric Generators integrated with JPL's planned Solar Probe spacecraft. The principle purpose of the Solar probe mission is to explore the solar corona by performing in-situ measurements at distances as close as four solar radii or 0.02 AU from the sun. This proximity to the sun imposes some unusual design constraints on the RTG and on its integration with the spacecraft. The results demonstrated that the obstructions result in significant performance penalties for the case of the standard GPHS-RTG design. Finally, the paper describes a simple empirical method for predicting the combined effect of fuel decay and thermoelectric degradation on the RTG's power output, and applies that method to predict the long-term power profile of the obstructed Solar Probe RTGs. The results indicate that the existing GPHS-RTG design, even without modifications can meet the JPL-prescribed EOM power requirement. There is also three copies in the file of an earlier version of this dated 8/3/1990 with the report number of FSC-ESD-217-90-470. The most current one is the IAF version (IAD-90-208) dated October 6-12, 1990.

Schock, Alfred

1990-10-01T23:59:59.000Z

359

Using neutral beams as a light ion beam probe (invited)  

SciTech Connect (OSTI)

By arranging the particle first banana orbits to pass near a distant detector, the light ion beam probe (LIBP) utilizes orbital deflection to probe internal fields and field fluctuations. The LIBP technique takes advantage of (1) the in situ, known source of fast ions created by beam-injected neutral particles that naturally ionize near the plasma edge and (2) various commonly available diagnostics as its detector. These born trapped particles can traverse the plasma core on their inner banana leg before returning to the plasma edge. Orbital displacements (the forces on fast ions) caused by internal instabilities or edge perturbing fields appear as modulated signal at an edge detector. Adjustments in the q-profile and plasma shape that determine the first orbit, as well as the relative position of the source and detector, enable studies under a wide variety of plasma conditions. This diagnostic technique can be used to probe the impact on fast ions of various instabilities, e.g., Alfvén eigenmodes (AEs) and neoclassical tearing modes, and of externally imposed 3D fields, e.g., magnetic perturbations. To date, displacements by AEs and by externally applied resonant magnetic perturbation fields have been measured using a fast ion loss detector. Comparisons with simulations are shown. In addition, nonlinear interactions between fast ions and independent AE waves are revealed by this technique.

Chen, Xi, E-mail: chenxi@fusion.gat.com [Oak Ridge Institute for Science and Education, Oak Ridge, Tennessee 37831 (United States); Heidbrink, W. W. [University of California Irvine, Irvine, California 92697 (United States); Van Zeeland, M. A.; Pace, D. C.; Petty, C. C.; Fisher, R. K. [General Atomics, P.O. Box 85608, San Diego, California 92186-5608 (United States); Kramer, G. J.; Nazikian, R. [Princeton Plasma Physics Laboratory, P.O. Box 451, Princeton, New Jersey 08543 (United States); Austin, M. E. [University of Texas at Austin, Austin, Texas 78712 (United States); Hanson, J. M. [Columbia University, New York, New York 10027 (United States); Zeng, L. [University of California Los Angeles, Los Angeles, California 90095 (United States)

2014-11-15T23:59:59.000Z

360

Guarded capacitance probes for measuring particle concentration and flow  

DOE Patents [OSTI]

Guarded capacitance probe structures are constructed with guard electrodes surrounding one or more sensor electrodes and ground electrodes or grounded surfaces surrounding the guard electrodes. In a one sensor embodiment, the probe utilizes an apertured sensor electrode and the guard electrode both surrounds the sensor electrode and fills the aperture. This embodiment is particularly useful for measuring particle concentration in a fluid suspension contained within a vessel or pipe. The portion of the guard electrode within the aperture of the sensor electrode prevents electric field lines from emanating from the sensor electrode into the fluid suspension and toward infinity. A two sensor embodiment of the probe is useful for measuring flow velocities of fluid suspensions through cross correlation of the outputs generated by each sensor. The relative dimensions of the guard and sensor electrodes are selected to provide the most accurate measurements by confining the electric lines emanating from the sensor electrode or electrodes and terminating on the surrounding grounded surfaces to a small measurement volume of the fluid suspension near the vessel or pipe wall. 14 figs.

Louge, M.Y.

1995-10-17T23:59:59.000Z

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Nonlocal probes of thermalization in holographic quenches with spectral methods  

E-Print Network [OSTI]

We describe the application of pseudo-spectral methods to problems of holographic thermal quenches of relevant couplings in strongly coupled gauge theories. We focus on quenches of a fermionic mass term in a strongly coupled N=4 supersymmetric Yang-Mills plasma, and the subsequent equilibration of the system. From the dual gravitational perspective, we study gravitational collapse of a massive scalar field in asymptotically anti-de-Sitter geometry with a prescribed boundary condition for its non-normalizable mode. Access to the full background geometry of the gravitational collapse allows for the study of nonlocal probes of the thermalization process. We discuss the evolution of the apparent and the event horizons, the two-point correlation functions of operators of large conformal dimensions, and the evolution of the entanglement entropy of the system. We compare the thermalization process from the viewpoint of local (the one-point) correlation functions and these nonlocal probes, finding that the thermalization time as measured by the probes is length dependent, and can exceed that of the one-point function. We further discuss how the different energy scales of the problem contribute to its thermalization.

Alex Buchel; Robert C. Myers; Anton van Niekerk

2014-10-22T23:59:59.000Z

362

Characteristics of probe current harmonics based on various applied voltage waveforms in low temperature plasmas  

SciTech Connect (OSTI)

The characteristics of probe currents induced by applying various probe voltage waveforms, such as sinusoidal, sawtooth, square, and triangular, were investigated at a floating potential. It was found that the measured probe currents have many harmonics depending on the voltage waveforms. This was mainly due to the nonlinearity of the sheath in the plasma and was analyzed using the fast Fourier transform and a circuit model. By applying a triangular voltage waveform to a probe, plasma parameters such as electron temperature and plasma density could be obtained and compared to those of a single Langmuir probe and a floating harmonic method.

Kim, Young-Do; Kim, Yu-Sin; Lee, Hyo-Chang; Bang, Jin-Young; Chung, Chin-Wook [Department of Electrical Engineering, Hanyang University, 17 Heangdang-dong, Seongdong-gu, Seoul 133-791 (Korea, Republic of)

2011-03-15T23:59:59.000Z

363

Multi-metastable states induced by the optical pump-probe process in terahertz quantum cascade lasers  

SciTech Connect (OSTI)

The optical pump-probe process in terahertz quantum cascade lasers is studied theoretically by using the open system simulation method. The emitter injection is considered and the charge neutrality in the active region is broken. We find that nonequilibrium oscillations may appear in the recovery processes. In particular, the formation of different equilibrium values of the population change after the periodic pulse pumping is observed clearly. Here, the phenomenon of multi-metastable states stems from the electron regulation by the emitter injection. Finally, we discuss the important impacts of the equilibrium stabilization time and obtain an in-depth understanding of the emitter injection.

Wang, F.; Guo, X. G., E-mail: xgguo@mail.sim.ac.cn; Wang, C.; Cao, J. C., E-mail: jccao@mail.sim.ac.cn [Key Laboratory of Terahertz Solid-State Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, 865 Changning Road, Shanghai 200050 (China)

2014-07-14T23:59:59.000Z

364

Langmuir probe diagnostic suite in the C-2 field-reversed configuration  

SciTech Connect (OSTI)

Several in situ probes have been designed and implemented into the diagnostic array of the C-2 field-reversed configuration (FRC) at Tri Alpha Energy [M. Tuszewski et al. (the TAE Team), Phys. Rev. Lett. 108, 255008 (2012)]. The probes are all variations on the traditional Langmuir probe. They include linear arrays of triple probes, linear arrays of single-tipped swept probes, a multi-faced Gundestrup probe, and an ion-sensitive probe. The probes vary from 5 to 7 mm diameter in size to minimize plasma perturbations. They also have boron nitride outer casings that prevent unwanted electrical breakdown and reduce the introduction of impurities. The probes are mounted on motorized linear-actuators allowing for programmatic scans of the various plasma parameters over the course of several shots. Each probe has a custom set of electronics that allows for measurement of the desired signals. High frequency ( > 5MHz) analog optical-isolators ensure that plasma parameters can be measured at sub-microsecond time scales while providing electrical isolation between machine and data acquisition systems. With these probes time-resolved plasma parameters (temperature, density, spatial potential, flow, and electric field) can be directly/locally measured in the FRC jet and edge/scrape-off layer.

Roche, T., E-mail: troche@trialphaenergy.com; Armstrong, S.; Knapp, K.; Slepchenkov, M. [Tri Alpha Energy Inc., PO Box 7010, Rancho Santa Margarita, California 92688 (United States); Sun, X. [Department of Modern Physics, University of Science and Technology of China, Hefei Anhui 230026 (China)

2014-11-15T23:59:59.000Z

365

Array of nucleic acid probes on biological chips for diagnosis of HIV and methods of using the same  

DOE Patents [OSTI]

The invention provides an array of oligonucleotide probes immobilized on a solid support for analysis of a target sequence from a human immunodeficiency virus. The array comprises at least four sets of oligonucleotide probes 9 to 21 nucleotides in length. A first probe set has a probe corresponding to each nucleotide in a reference sequence from a human immunodeficiency virus. A probe is related to its corresponding nucleotide by being exactly complementary to a subsequence of the reference sequence that includes the corresponding nucleotide. Thus, each probe has a position, designated an interrogation position, that is occupied by a complementary nucleotide to the corresponding nucleotide. The three additional probe sets each have a corresponding probe for each probe in the first probe set. Thus, for each nucleotide in the reference sequence, there are four corresponding probes, one from each of the probe sets. The three corresponding probes in the three additional probe sets are identical to the corresponding probe from the first probe or a subsequence thereof that includes the interrogation position, except that the interrogation position is occupied by a different nucleotide in each of the four corresponding probes.

Chee, Mark (Palo Alto, CA); Gingeras, Thomas R. (Santa Clara, CA); Fodor, Stephen P. A. (Palo Alto, CA); Hubble, Earl A. (Mountain View, CA); Morris, MacDonald S. (San Jose, CA)

1999-01-19T23:59:59.000Z

366

A restoration model of distorted electron density in wave-cutoff probe measurement  

SciTech Connect (OSTI)

This study investigates the problem of electron density distortion and how the density can be restored in a wave-cutoff probe. Despite recent plasma diagnostics research using a wave-cutoff probe, the problem of electron density distortion caused by plasma conditions has not been resolved. Experimental results indicate that electron density measured using the wave-cutoff method is highly susceptible to variations in the probe tip gap. This electron density distortion is caused by the bulk plasma disturbance between probe tips, and it must be removed for calculating the absolute electron density. To do this, a detailed analytic model was developed using the power balance equation near probe tips. This model demonstrates the characteristics of plasma distortion in wave-cutoff probe measurement and successfully restored the absolute value of electron density with varying probe tip gaps.

Jun, Hyun-Su, E-mail: mtsconst@kaist.ac.kr; Lee, Yun-Seong [Department of Physics, Korea Advanced Institute of Science and Technology, Daejeon 305-701 (Korea, Republic of)] [Department of Physics, Korea Advanced Institute of Science and Technology, Daejeon 305-701 (Korea, Republic of)

2014-02-15T23:59:59.000Z

367

Quenching methods for background reduction in luminescence-based probe-target binding assays  

DOE Patents [OSTI]

Background luminescence is reduced from a solution containing unbound luminescent probes, each having a first molecule that attaches to a target molecule and having an attached luminescent moiety, and luminescent probe/target adducts. Quenching capture reagent molecules are formed that are capable of forming an adduct with the unbound luminescent probes and having an attached quencher material effective to quench luminescence of the luminescent moiety. The quencher material of the capture reagent molecules is added to a solution of the luminescent probe/target adducts and binds in a proximity to the luminescent moiety of the unbound luminescent probes to quench luminescence from the luminescent moiety when the luminescent moiety is exposed to exciting illumination. The quencher capture reagent does not bind to probe molecules that are bound to target molecules and the probe/target adduct emission is not quenched.

Cai, Hong (Los Alamos, NM); Goodwin, Peter M (Los Alamos, NM); Keller, Richard A. (Los Alamos, NM); Nolan, Rhiannon L. (Santa Fe, NM)

2007-04-10T23:59:59.000Z

368

Probing the catalytic activity and heterogeneity of Au-nanoparticles at the single-molecule level  

E-Print Network [OSTI]

electricity from solar or fuel cells.16,20,21,32­38 The modern nanocatalysts, especially for solar and fuel cells, are still far from optimal for sustainable applications, however.39 Intense efforts have thus

Chen, Peng

369

Feeding and feedback in the active nucleus of Mrk 1157 probed with Gemini NIFS  

E-Print Network [OSTI]

We have mapped the stellar and gaseous kinematics, as well as the emission-line flux distributions and ratios, from the inner 450pc radius of Mrk1157, using 2D near-IR spectra obtained with the Gemini NIFS at a spatial resolution of 35pc. The stellar velocity field shows a rotation pattern, with a discrete S-shaped zero velocity curve. The presence of a bar is also supported by the residual map between the observed rotation field and a model of circular orbits in a Plummer potential. The stellar velocity dispersion map presents a partial ring of low-sigma values (50-60km/s) at 250pc from the nucleus surrounded by higher sigma values from the galaxy bulge, originated in kinematically colder regions with recent star formation. The velocity dispersion of the bulge (100km/s) implies in a black hole mass of 8.3x10^6M_Sun. Emission-line flux distributions are most extended along PA=27/153deg, reaching at least 450pc from the nucleus and following the orientation observed in previous optical emission-line [OIII] ima...

Riffel, Rogemar A

2011-01-01T23:59:59.000Z

370

Structure-Activity Relationships in NH3-SCR over Cu-SSZ-13 as Probed by  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security AdministrationcontrollerNanocrystalline Gallium Oxide Thin Films. | EMSL Morphology, and

371

Assessment of the 296-S-21 Stack Sampling Probe Location  

SciTech Connect (OSTI)

Tests were performed to assess the suitability of the location of the air sampling probe on the 296-S-21 stack according to the criteria of ANSI N13.1-1999, Sampling and Monitoring Releases of Airborne Radioactive Substances from the Stacks and Ducts of Nuclear Facilities. Pacific Northwest National Laboratory conducted most tests on a 3.67:1 scale model of the stack. CH2MHill also performed some limited confirmatory tests on the actual stack. The tests assessed the capability of the air-monitoring probe to extract a sample representative of the effluent stream. The tests were conducted for the practical combinations of operating fans and addressed: (1) Angular Flow--The purpose is to determine whether the velocity vector is aligned with the sampling nozzle. The average yaw angle relative to the nozzle axis should not be more than 20. The measured values ranged from 5 to 11 degrees on the scale model and 10 to 12 degrees on the actual stack. (2) Uniform Air Velocity--The gas momentum across the stack cross section where the sample is extracted should be well mixed or uniform. The uniformity is expressed as the variability of the measurements about the mean, the coefficient of variance (COV). The lower the COV value, the more uniform the velocity. The acceptance criterion is that the COV of the air velocity must be ?20% across the center two-thirds of the area of the stack. At the location simulating the sampling probe, the measured values ranged form 4 to 11%, which are within the criterion. To confirm the validity of the scale model results, air velocity uniformity measurements were made both on the actual stack and on the scale model at the test ports 1.5 stack diameters upstream of the sampling probe. The results ranged from 6 to 8% COV on the actual stack and 10 to 13% COV on the scale model. The average difference for the eight runs was 4.8% COV, which is within the validation criterion. The fact that the scale model results were slightly higher than the actual stack suggests that the other test results on the scale model are conservative relative to the actual stack. (3) Uniform Concentration of Tracer Gases--A uniform contaminant concentration in the sampling plane enables the extraction of samples that represent the true concentration. This was first tested using a tracer gas to represent gaseous effluents. The fan is a good mixer, so injecting the tracer downstream of the fans provides worst-case results. The acceptance criteria are that (1) the COV of the measured tracer gas concentration is ?20% across the center two-thirds of the sampling plane and (2) at no point in the sampling plane does the concentration vary from the mean by >30%. The results on the scale model at the point simulating the sampling probe ranged from 0.3 to 6 %COV, and the maximum single point deviation from the mean was -10%. (4) Uniform Concentration of Tracer Particles--Uniformity in contaminant concentration at the sampling probe was further demonstrated using tracer particles large enough to exhibit inertial effects. Particles of 10-?m aerodynamic diameter were used. The acceptance criterion is that the COV of particle concentration is ?20% across the center two-thirds of the sampling plane. The scale model results ranged form 2 to 9%. Based on these tests, the location of the air sampling probe on the 296-S-21 stack meets the requirements of the ANSI/HPS N13.1-1999 standard.

Glissmeyer, John A.

2006-09-08T23:59:59.000Z

372

COMBINED FLUORESCENT AND GOLD PROBES FOR MICROSCOPIC AND MORPHOLOGICAL INVESTIGATIONS.  

SciTech Connect (OSTI)

Nanogold{reg_sign}, a gold cluster with a core of gold atoms 1.4 nm in diameter, has proven to be a superior probe label for electron microscopy (EM), giving both higher labeling density and improved access to previously hindered or restricted antigens. It may be visualized by autometallography (AMG) for use in light microscopy (LM): silver-and gold-amplified Nanogold detection has proven to be one of the most sensitive methods available for the detection of low copy number targets such as viral DNA in cells and tissue specimens. AMG enhancement has also made Nanogold an effective detection label in blots and gels. The following protocols will be described: Labeling of nuclear components in cells. Protocol for in situ hybridization and detection with fluorescein-Nanogold--or Cy3{trademark}-Nanogold-labeled streptavidin. Nanogold is an inert molecule, and generally does not interact with biological molecules unless a specific chemical reactivity is introduced into the molecule. Conjugates are prepared using site-specific chemical conjugation through reactive chemical functionalities introduced during Nanogold preparation, which allows the gold label to be attached to a specific site on the conjugate biomolecule. For example, a maleimido-Nanogold derivative, which is specific for thiol binding, is frequently attached to the hinge region of an antibody at a unique thiol site generated by selective reduction of a hinge disulfide. This site is remote from the antigen combining region, and the Nanogold, therefore, does not compromise target binding. Nanogold may also be prepared with specific reactivity towards amines or other unique chemical groups. This mode of attachment enables the preparation of probes labeled with both Nanogold and fluorescent labels. Different chemical reactivities are used to attach the Nanogold and the fluorescent groups to different sites in the conjugate biomolecule, as shown in Figure 7.1. In this manner, the two labels are spaced sufficiently far apart that fluorescent resonance energy transfer does not quench the fluorescent signal, and the probes may be used to label specimens for fluorescent and EM observation in a single staining procedure. This reduces the complexity of the staining procedure, allowing less specimen perturbation, and also enables a higher degree of correlation between the fluorescence and EM localization of the target, thus increasing the usefulness of the complementary data sets. Since gold and fluorescent-labeled probes are often used at different concentrations under different conditions, optimum procedures for the use of fluorescent and gold probes may entail some degree of compromise between the most appropriate conditions for the two types of probes. However, the chemical stability of the Nanogold label means that it is generally stable to a wide range of use conditions, and the following protocols have been found to be effective for labeling specimens with combined fluorescein and Nanogold-labeled antibody Fab' probes and with combined Cy3 and Nanogold-labeled streptavidin.

POWELL,R.D.HAINFELD,J.F.

2002-04-17T23:59:59.000Z

373

Integrated use of burden profile probe and in-burden probe for gas flow control in the blast furnace  

SciTech Connect (OSTI)

Gas flow in the blast furnace is one of the most important factors in controlling a furnace. It not only determines the production but also the fuel consumption and the campaign life. At Nos. 4 and 5 blast furnaces of ROGESA, probes are installed for detection of the burden profiles and of the gas flow distribution. For an optimum use of these probes a program system has been developed by ROGESA and Dango and Dienenthal. With this program system it is possible to analyze the operating condition of a blast furnace by means of a fuzzy logic analysis. In case of deviations from the defined desired condition, recommendations for corrective measures for the material distribution are made. Both furnaces are equipped with a bell-less top, a coal injection system, high-temperature hot blast stoves with heat recovery and a top gas pressure recovery turbine. Most of the time it is impossible to control all the required parameters. For this reason it is meaningful to measure the actual material distribution at the furnace top by means of a burden profile probe which permits quick and repeated measurements without any retroactive effects. The paper describes the instrumentation of the furnace, correlation of measuring methods, and a program system for analysis of measuring data.

Bordemann, F.; Hartig, W.H. [AG der Dillinger Huettenweke, Dillingen (Germany); Grisse, H.J. [Dango and Dienenthal Siegen (Germany); Speranza, B.E. [Dango and Dienenthal, Inc., Highland, IN (United States)

1995-12-01T23:59:59.000Z

374

Chloroplast symbiosis: organization and expression of chloroplast genes and maintenance of chloroplast activity in a foreign host  

E-Print Network [OSTI]

blotting with a V. litorea intergenic transcribed spacer (ITS) probe disproved the presence of any whole algal nuclei or nucleomorph in the host sea slug. This suggested the maintenance of algal chloroplast activity may be due to the high autonomy...

Li, Wei-Ye

2012-06-07T23:59:59.000Z

375

1Electricity from Sunlight: The Van Allen Probes Solar Panels NASA's twin Van Allen Probes spacecraft will be launched in 2012. The  

E-Print Network [OSTI]

1Electricity from Sunlight: The Van Allen Probes Solar Panels NASA's twin Van Allen Probes of the surrounding four solar panel `wings' that provide power to the spacecraft instruments. The small blue rectangles within each of the four solar panels show the location of the solar cells used to power

376

NANO FOUNTAIN PROBE AIDS DEVELOPMENT OF NEW THERAPEUTICS Horacio D. Espinosa, Department of Mechanical Engineering, Northwestern University  

E-Print Network [OSTI]

NANO FOUNTAIN PROBE AIDS DEVELOPMENT OF NEW THERAPEUTICS Horacio D. Espinosa, Department a novel nanoscale fluid delivery probe, called the Nano Fountain Probe, which enables studies to a dispensing tip. The Nano Fountain Probe has proven capable of delivering a variety of functional materials

Shull, Kenneth R.

377

M2M Communications | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place:KeystoneSolarListLiveFuelsLoupInyoLuminateCommunications

378

NOPR CH2M | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAXBalanced Scorecard Federal2 to:Diesel Engines|ForeignNNSA issuesAON NOPR

379

Using electrical resistance probes for moisture determination in switchgrass windrows  

SciTech Connect (OSTI)

Determining moisture levels in windrowed biomass is important for both forage producers and researchers. Energy crops such as switchgrass have been troublesome when using the standard methods set for electrical resistance meters. The objectives of this study were to i) develop the methodologies needed to measure MC in switchgrass using electrical resistance meters, ii) to determine the effects of pressure and probe orientation on MC measurement and iii) to generate MC calibration equations for electrical resistance meters using switchgrass in the senescence growth stage. Two meters (Meter 1, Farmex HT-PRO; Meter 2, Delmhorst F-2000) were selected based on commercial availability. A forage compression apparatus was designed and constructed with on-farm materials and methods to provide a simple system of applying pressure achievable by any forage producer or researcher in the field. Two trials were performed to test four levels of moisture contents (10, 20, 30, and 40%), five pressures (0, 1.68, 3.11, 4.55, 6.22 kN/m 2; 0, 35, 65, 95, 130 lb/ft 2), and two probe orientations (axial and transverse) in a 4x5x2 factorial design. Results indicated that meter accuracy increased as pressure increased. Regression models accounted for 91% and 81% of the variation for Meter 1 and Meter 2 at a pressure of 4.55 kN/m 2 (95 lb/ft 2) and a transverse probe orientation. Calibration equations were developed for both meters to improve moisture measurement accuracy for farmers and researchers in the field.

Chesser Jr., G. D.; Davis, J. D.; Purswell, J. L.; Lemus, R.

2011-08-01T23:59:59.000Z

380

Near field optical probe for critical dimension measurements  

DOE Patents [OSTI]

A resonant planar optical waveguide probe for measuring critical dimensions on an object in the range of 100 nm and below is disclosed. The optical waveguide includes a central resonant cavity flanked by Bragg reflector layers with input and output means at either end. Light is supplied by a narrow bandwidth laser source. Light resonating in the cavity creates an evanescent electrical field. The object with the structures to be measured is translated past the resonant cavity. The refractive index contrasts presented by the structures perturb the field and cause variations in the intensity of the light in the cavity. The topography of the structures is determined from these variations. 8 figs.

Stallard, B.R.; Kaushik, S.

1999-05-18T23:59:59.000Z

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Top quarks as a probe for heavy new physics  

E-Print Network [OSTI]

The heaviest fermion is expected to couple strongly to new physics and appears therefore as a natural probe in many BSM scenarios. Moreover, top physics has now entered in a precision era thanks to the huge amount of top quarks produced at hadron colliders, advanced experimental methods and accurate theoretical predictions. In this talk, we will used effective field theory to search for heavy new physics in a model independent way. This method can also be used to quantify the room left for new physics if no deviation from the SM is found.

Celine Degrande

2014-07-11T23:59:59.000Z

382

Probing Core-Hole Localization in Molecular Nitrogen  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home DesignPresentationsSRS Responds toPrivacy ActProbing Core-Hole

383

Probing Fukushima with cosmic rays should speed cleanup  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home DesignPresentationsSRS Responds toPrivacy ActProbing

384

Probing Strain-Induced Changes in Electronic Structure with XMCD  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home DesignPresentationsSRS Responds toPrivacyProbing Strain-Induced

385

Probing Strain-Induced Changes in Electronic Structure with XMCD  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home DesignPresentationsSRS Responds toPrivacyProbing

386

Exploring Classically Chaotic Potentials with a Matter Wave Quantum Probe  

SciTech Connect (OSTI)

We study an experimental setup in which a quantum probe, provided by a quasimonomode guided atom laser, interacts with a static localized attractive potential whose characteristic parameters are tunable. In this system, classical mechanics predicts a transition from regular to chaotic behavior as a result of the coupling between the different degrees of freedom. Our experimental results display a clear signature of this transition. On the basis of extensive numerical simulations, we discuss the quantum versus classical physics predictions in this context. This system opens new possibilities for investigating quantum scattering, provides a new testing ground for classical and quantum chaos, and enables us to revisit the quantum-classical correspondence.

Gattobigio, G. L. [Laboratoire de Collisions Agregats Reactivite, CNRS UMR 5589, IRSAMC, Universite de Toulouse (UPS), 118 Route de Narbonne, 31062 Toulouse CEDEX 4 (France); Laboratoire Kastler Brossel, Ecole Normale Superieure, 24 rue Lhomond, 75005 Paris (France); Couvert, A. [Laboratoire Kastler Brossel, Ecole Normale Superieure, 24 rue Lhomond, 75005 Paris (France); Georgeot, B. [Laboratoire de Physique Theorique (IRSAMC), Universite de Toulouse (UPS), 31062 Toulouse (France); CNRS, LPT UMR5152 (IRSAMC), 31062 Toulouse (France); Guery-Odelin, D. [Laboratoire de Collisions Agregats Reactivite, CNRS UMR 5589, IRSAMC, Universite de Toulouse (UPS), 118 Route de Narbonne, 31062 Toulouse CEDEX 4 (France)

2011-12-16T23:59:59.000Z

387

Scanning Probe Direct-Write of Germanium Nanostructures. | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administrationcontroller systems controller systemsis aSecurity8Nuclearof DataNarrows Dam -Probe

388

Probing Core-Hole Localization in Molecular Nitrogen  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FORPoints of Contact Privacy PointsProbing Core-Hole

389

Probing Core-Hole Localization in Molecular Nitrogen  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FORPoints of Contact Privacy PointsProbing

390

Probing Fukushima with cosmic rays should speed cleanup  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FORPoints of Contact PrivacyEMSLplantProbing

391

Probing Strain-Induced Changes in Electronic Structure with XMCD  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FORPoints of ContactLiquidProbing Strain-Induced

392

Probing Strain-Induced Changes in Electronic Structure with XMCD  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FORPoints of ContactLiquidProbing

393

Probing Strain-Induced Changes in Electronic Structure with XMCD  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FORPoints ofProbing Strain-Induced Changes in

394

Probing the Electronic and Structural Properties of Chromium Oxide Clusters  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FORPoints ofProbing

395

Probing the Mobility of Supercooled Liquid 3-Methylpentane at Temperatures  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FORPoints ofProbingDewetting andits Radical Anion:

396

Probing the electronic stablility of multiply charged anions:sulfonated  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16 FORPoints ofProbingDewetting andits RadicalUsing

397

Tensiometer, drive probe for use with environmental testing equipment, and methods of inserting environmental testing equipment into a sample  

DOE Patents [OSTI]

A method of inserting a tensiometer into a sample, comprises providing a drive probe configured to be engaged by direct push equipment; supporting a porous member from the drive probe; and driving the drive probe into the sample using a cone penetrometer. A tensiometer comprises a drive probe configured to be engaged by direct push equipment or a cone penetrometer; a porous member supported by the drive probe; and a pressure sensor in pressure sensing relation to the porous member.

Hubbell, Joel M.; Sisson, James B.

2005-07-26T23:59:59.000Z

398

Cyanine-based probe\\tag-peptide pair fluorescence protein imaging and fluorescence protein imaging methods  

DOE Patents [OSTI]

A molecular probe comprises two arsenic atoms and at least one cyanine based moiety. A method of producing a molecular probe includes providing a molecule having a first formula, treating the molecule with HgOAc, and subsequently transmetallizing with AsCl.sub.3. The As is liganded to ethanedithiol to produce a probe having a second formula. A method of labeling a peptide includes providing a peptide comprising a tag sequence and contacting the peptide with a biarsenical molecular probe. A complex is formed comprising the tag sequence and the molecular probe. A method of studying a peptide includes providing a mixture containing a peptide comprising a peptide tag sequence, adding a biarsenical probe to the mixture, and monitoring the fluorescence of the mixture.

Mayer-Cumblidge, M. Uljana; Cao, Haishi

2013-01-15T23:59:59.000Z

399

Solids Fraction Measurement with a Reflective Fiber Optic Probe  

SciTech Connect (OSTI)

A method has been developed to extract solids fraction information from a reflective fiber optic probe. The commercially available reflective fiber optic probe was designed to measure axial particle velocity (both up and down directions). However, the reflected light intensity measured is related to particle size and particle concentration. A light reflection model is used to relate the reflected light intensity to solids fraction. In this model we assume that the reflected light intensity is a fixed fraction, K1, of the total light intensity lost in penetration of a solid layer. Also, the solids fraction is related to particle concentration, N, in the light path, by N = K2 (1- ?), where (1-?) is the solids fraction. The parameters K1 and K2 are determined through a calibration and curve fitting procedure. This paper describes this procedure and the steps taken to derive the values of K1 and K2. It is proposed that the reflective fiber optic can be used for real time measurement of solids fraction in a circulating fluid bed.

Seachman, S.M.; Yue, P.C.; Ludlow, J.C.; Shadle, L.J.

2006-11-01T23:59:59.000Z

400

Method for producing labeled single-stranded nucleic acid probes  

DOE Patents [OSTI]

Disclosed is a method for the introduction of unidirectional deletions in a cloned DNA segment. More specifically, the method comprises providing a recombinant DNA construct comprising a DNA segment of interest inserted in a cloning vector, the cloning vector having an f1 endonuclease recognition sequence adjacent to the insertion site of the DNA segment of interest. The recombinant DNA construct is then contacted with the protein pII encoded by gene II of phage f1 thereby generating a single-stranded nick. The nicked DNA is then contacted with E. coli Exonuclease III thereby expanding the single-stranded nick into a single-stranded gap. The single-stranded gapped DNA is then contacted with a single-strand-specific endonuclease thereby producing a linearized DNA molecule containing a double-stranded deletion corresponding in size to the single-stranded gap. The DNA treated in this manner is then incubated with DNA ligase under conditions appropriate for ligation. Also disclosed is a method for producing single-stranded DNA probes. In this embodiment, single-stranded gapped DNA, produced as described above, is contacted with a DNA polymerase in the presence of labeled nucleotides to fill in the gap. This DNA is then linearized by digestion with a restriction enzyme which cuts outside the DNA segment of interest. The product of this digestion is then denatured to produce a labeled single-stranded nucleic acid probe.

Dunn, John J. (Bellport, NY); Quesada, Mark A. (Middle Island, NY); Randesi, Matthew (Upton, NY)

1999-10-19T23:59:59.000Z

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Monitoring power plant fireside corrosion using corrosion probes  

SciTech Connect (OSTI)

The ability to monitor the corrosion degradation of key components in fossil fuel power plants is of utmost importance for Futuregen and ultra-supercritical power plants. Fireside corrosion occurs in the high temperature sections of energy production facilities due to a number of factors: ash deposition, coal composition, thermal gradients, and low NOx conditions, among others. Problems occur when equipment designed for either oxidizing or reducing conditions is exposed to alternating oxidizing and reducing conditions. This can happen especially near the burners. The use of low NOx burners is becoming more commonplace and can produce reducing environments that accelerate corrosion. One method of addressing corrosion of these surfaces is the use of corrosion probes to monitor when process changes cause corrosive conditions. In such a case, corrosion rate could become a process control variable that directs the operation of a coal combustion or coal gasification system. Alternatively, corrosion probes could be used to provide an indication of total metal damage and thus a tool to schedule planned maintenance outages.

Covino, Bernard S., Jr.; Bullard, Sophie J.; Cramer, Stephen D.; Holcomb, Gordon R.; Ziomek-Moroz, M.

2005-01-01T23:59:59.000Z

402

Toroid cavities as NMR detectors in high pressure probes  

SciTech Connect (OSTI)

A cylindrical toroid cavity has been developed for application as an NMR detector for high sensitivity and high resolution spectroscopy in metal vessel probes. Those probes are used for in situ investigations at high temperature and pressure. Since the transmitted r.f. field is completely confined within the torus, the cavity can be placed inside the pressurized system without magnetic coupling to the metal vessel. Resonance frequencies up to 400 MHz make the toroid cavity detector especially suited for use in {sup 1}H and {sup 19}F spectroscopy. Typically achieved static {sup 1}H linewidths, measured on CHCl{sub 3} using cavities in Be-Cu pressure vessels, are 2.0 Hz. On the basis of theoretical considerations that include the radial dependence of the r.f. field within cylindrical or circular toroid detectors, equations were evolved to predict the signal intensity as a function of the pulse width. The equations precisely describe the deviations from the sinusoidal approximation, which is generally used for signal intensities derived from Helmholtz or solenoid coils.

Woelk, K.; Rathke, J.W.; Klingler, R.J.

1993-03-01T23:59:59.000Z

403

HIGH TEMPERATURE CONDUCTIVITY PROBE FOR MONITORING CONTAMINATION LEVELS IN POWER PLANT BOILER WATER.  

E-Print Network [OSTI]

??A high temperature/high pressure flow through probe was designed to measure high temperature electrical conductivity of aqueous (aq) dilute electrolyte solutions, an application which can… (more)

Hipple, Sarah

2008-01-01T23:59:59.000Z

404

Magnetism at spinel thin film interfaces probed through soft x-ray spectroscopy techniques  

E-Print Network [OSTI]

Magnetism at spinel thin ?lm interfaces probed through softachievable in bulk form. Magnetism at the interface regionand the origin of the magnetism from multiple magnetic

Chopdekar, R.V.

2010-01-01T23:59:59.000Z

405

Light and Fast: Probing Carriers and Vibrations in 1D and 2D...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and mechanical, are simultaneously important. First, we will discuss ultrafast optoelectronic measurements of graphene p-n junctions that probe the fundamental thermal...

406

E-Print Network 3.0 - atom probe tomography Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

4 ATOM-PROBE TOMOGRAPHIC STUDY OF THE THREE-DIMENSIONAL STRUCTURE OF PRESOLAR SILICON CARBIDE AND NANODIAMONDS AT ATOMIC RESOLUTION. Summary: tomographic studies of presolar...

407

E-Print Network 3.0 - anisotropy probe wmap Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

4 5 > >> 1 Current research themes (Contribution to the IUCAA annual report 2006-2007) Summary: from the Wilkinson Microwave Anisotropy Probe com- bine high angular resolution with...

408

E-Print Network 3.0 - arrayed metal probes Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

probe... in this study. Metallic layers were sandwiched between polyimide layers ... Source: Collection: Biology and Medicine 26 RESONANT TERAHERTZ TRANSMISSION OF PLASMONIC...

409

E-Print Network 3.0 - apfim atom probe Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

au n'll, Tome 49, novembre 1988 ATOM PROBE... of nanometers in two transition metal-metalloid amorphous alloys have been investigated by means ... Source: Ecole...

410

E-Print Network 3.0 - apfim atom-probe field Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

au n'll, Tome 49, novembre 1988 ATOM PROBE... of nanometers in two transition metal-metalloid amorphous alloys have been ... Source: Ecole Polytechnique, Centre de...

411

E-Print Network 3.0 - angle spinning probe Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and limits the useful Faraday measurement... Faraday effect to probe the ... Source: Deutsch, Ivan H. - Department of Physics and Astronomy, University of New Mexico; Jessen,...

412

anisotropy probe five-year: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: The Wilkinson Microwave Anisotropy Probe (WMAP) mapped the distribution of temperature and polarization over the entire sky in five microwave frequency bands. These...

413

Resonant soft x-ray scattering: elemental/chemical specific probe...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Resonant soft x-ray scattering: elementalchemical specific probe of reciprocal space and ordered structure Wednesday, October 15, 2014 - 3:00pm SLAC, Redtail Hawk Conference Room...

414

E-Print Network 3.0 - afrodite probing structure Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

VEITCH The University of Melbourne Summary: DARRYL VEITCH The University of Melbourne TWO PROBLEMS IN NETWORK PROBING Paris Networking 27 Juin... 2007 1 Temporal Loss and Delay...

415

Lithium Ethylene Dicarbonate Identified as the Primary Product ofChemical and Electrochemical Reduction of EC in EC:EMC/1.2M LiPF6Electrolyte  

SciTech Connect (OSTI)

Lithium ethylene dicarbonate (CH2OCO2Li)2 was chemically synthesized and its Fourier Transform Infrared (FTIR) spectrum was obtained and compared with that of surface films formed on Ni after cyclic voltammetry (CV) in 1.2M lithium hexafluorophosphate(LiPF6)/ethylene carbonate (EC): ethyl methyl carbonate (EMC) (3:7, w/w) electrolyte and on metallic lithium cleaved in-situ in the same electrolyte. By comparison of IR experimental spectra with that of the synthesized compound, we established that the title compound is the predominant surface species in both instances. Detailed analysis of the IR spectrum utilizing quantum chemical (Hartree-Fock) calculations indicates that intermolecular association through O...Li...O interactions is very important in this compound. It is likely that the title compound in passivation layer has a highly associated structure, but the exact intermolecular conformation could not be established based on analysis of the IR spectrum.

Zhuang, Guorong V.; Xu, Kang; Yang, Hui; Jow, T. Richard; RossJr., Philip N.

2005-05-11T23:59:59.000Z

416

Titan Imagery with Keck AO during and after Probe Entry  

SciTech Connect (OSTI)

We present adaptive optics data from the 10-m W.M. Keck telescope that were taken during the time the Huygens probe descended through Titan's atmosphere, and on the days following touch-down. The spatial resolution of the images is typically {approx}0.04-inch, or {approx}240 km on Titan (60 km/pixel). No probe entry signal was detected at levels exceeding 0.8 {micro}Jy (3-{sigma}) per pixel (0.01-inch), which although within the range of predicted flux levels, cannot constrain any models. We present data on Titan's surface, troposphere and stratosphere during the days following probe entry, when the solar phase angle varied from 0.05{sup o} up to 0.8{sup o}, with the Sun in the West. Contrary to expectation, the data often showed the East side to be brightest. Adding data obtained with Keck and Gemini over the past few years reveals that the East-West asymmetry can be explained by a combination of the solar phase angle effect together with a general preponderance of haze on Titan's East or morning hemisphere. The troposphere was characterized by quiescent weather; only a few small clouds were present near the south pole, at typical altitudes of 30-40 km. While stratospheric haze was prominent over the northern hemisphere, tropospheric haze dominated the south, from the S. pole up to latitudes of {approx} -45{sup o}. An intriguing observation is that obtained at 1.22 {micro}m, which revealed haze in the form of a collar at -60{sup o}, in contrast to the polar haze cap as usually seen. A comparison of narrow band JHK images of Titan's surface with that obtained by Cassini ISS shows a striking resemblance in small-scale features. After a decent attempt to remove the atmosphere from the images, the surface contrast between dark and bright areas may be larger at 2 {micro}m than at 1.6 and 1.3 {micro}m. If true, this could imply that the dark areas on Titan's surface are covered by a coarser grained frost than the bright areas, and/or that there are more absorbers, such as NH{sub 3}/NH{sub 4}SH frost, in these dark areas.

de Pater, I; Adamkovics, M; Bouchez, A H; Brown, M E; Gibbard, S G; Marchis, F; Roe, H G; Schaller, E L; Young, E

2006-02-03T23:59:59.000Z

417

Atom chip microscopy: A novel probe for strongly correlated materials  

SciTech Connect (OSTI)

Improved measurements of strongly correlated systems will enable the predicative design of the next generation of supermaterials. In this program, we are harnessing recent advances in the quantum manipulation of ultracold atomic gases to expand our ability to probe these technologically important materials in heretofore unexplored regions of temperature, resolution, and sensitivity parameter space. We are working to demonstrate the use of atom chips to enable single-shot, large area detection of magnetic flux at the 10^-7 flux quantum level and below. By harnessing the extreme sensitivity of atomic clocks and Bose-Einstein condensates (BECs) to external perturbations, the cryogenic atom chip technology developed here will provide a magnetic flux detection capability that surpasses other techniques---such as scanning SQUIDs---by a factor of 10--1000. We are testing the utility of this technique by using rubidium BECs to image the magnetic fields emanating from charge transport and magnetic domain percolation in strongly correlated materials as they undergo temperature-tuned metal--to--insulator phase transitions. Cryogenic atom chip microscopy introduces three very important features to the toolbox of high-resolution, strongly correlated material microscopy: simultaneous detection of magnetic and electric fields (down to the sub-single electron charge level); no invasive large magnetic fields or gradients; simultaneous micro- and macroscopic spatial resolution; freedom from 1/f flicker noise at low frequencies; and, perhaps most importantly, the complete decoupling of probe and sample temperatures. The first of these features will play an important role in studying the interplay between magnetic and electric domain structure. The last two are crucial for low frequency magnetic noise detection in, e.g., the cuprate pseudogap region and for precision measurements of transport in the high temperature, technologically relevant regime inaccessible to other techniques based on superconducting scanning probes. In periods 1--3 of this grant, which we now close at the University of Illinois at Urbana-Champaign and restart at Stanford University where our new lab is being built, we have demonstrated the ability to rapidly create Rb BECs and trap them within microns of a surface ina cryostat. Period 4 of this grant, to be performed at Stanford, will demonstrate the feasibility of using atom chips with a BEC to image transport features on a cryogenically cooled surface. Successful demonstration, in future funding cycles, will lead directly to the use of system for studies of transport in exotic and technologically relevant materials such as cuprate superconductors and topological insulators.

Lev, Benjamin L

2011-11-03T23:59:59.000Z

418

Calculations of Nonlinear Wave-Packet Interferometry Signals in the Pump-Probe Limit as Tests for Vibrational Control over Electronic Excitation Transfer  

E-Print Network [OSTI]

The preceding paper describes a strategy for externally influencing the course of short-time electronic excitation transfer (EET) in molecular dimers and observing the process by nonlinear wave-packet interferometry (nl-WPI). Within a sample of isotropically oriented dimers having a specified internal geometry, a vibrational mode internal to the acceptor chromophore can be preferentially driven by electronically nonresonant impulsive stimulated Raman (or resonant infrared) excitation with a short polarized control pulse. A subsequent electronically resonant polarized pump then preferentially excites the donor, and EET ensues. Here we test both the control strategy and its spectroscopic investigation-with some sacrifice of amplitude-level detail-by calculating the pump-probe difference signal. That signal is the limiting case of the control-influenced nl-WPI signal in which the two pulses in the pump pulse-pair coincide, as do the two pulses in the probe pulse-pair. We present calculated pump-probe difference signals for (1) a model excitation-transfer complex in which two equal-energy monomers each support one moderately Franck-Condon active intramolecular vibration; (2) a simplified model of the covalent dimer dithia-anthracenophane, representing its EET dynamics following selective impulsive excitation of the weakly Franck-Condon active anthracene vibration at 385 cm-1; and (3) a model complex featuring moderate electronic-vibrational coupling in which the site energy of the acceptor chromophore is lower than that of the donor.

Jason D. Biggs; Jeffrey A. Cina

2009-10-12T23:59:59.000Z

419

Nonlinear ultrafast dynamics of high temperature YBa[subscript 2]Cu[subscript 3]O[subscript 7-?] superconductors probed with THz pump / THz probe spectroscopy  

E-Print Network [OSTI]

High power THz pulses induce near transparency in superconductive YBCO thin films below the critical temperature. THz pump/THz probe measurements reveal a decay of the induced transparency on the time scale of a few picoseconds.

Grady, N. K.

420

Use of gene probes to assess the impact and effectiveness of aerobic in situ bioremediation of TCE  

SciTech Connect (OSTI)

Gene probe hybridization was used to determine distribution and expression of co-metabolic genes at a contaminated site as it underwent in situ methanotrophic bioremediation of trichloroethylene (TCE). The bioremediation strategies tested included a series of air, air:methane, and air:methane:nutrient pulses of the test plot using horizontal injection wells. During the test period, the levels of TCE reduced drastically in almost all test samples. Sediment core samples (n = 367) taken from 0 m (surface)-43 m depth were probed for gene coding for methanotrophic soluble methane monooxygenase (sMMO) and heterotrophic toluene dioxygenase (TOD), which are known to co-metabolize TCE. The same sediment samples were also probed for genes coding for methanol dehydrogenase (MDH) (catalyzing the oxidation of methanol to formaldehyde) to assess specifically changes in methylotrophic bacterial populations in the site. Gene hybridization results showed that the frequency of detection of sMMO genes were stimulated approximately 250% following 1% methane:air (v/v) injection. Subsequent injection of 4% methane:air (v/v) resulted in an 85% decline probably due to nutrient limitations, since addition of nutrients (gaseous nitrogen and phosphorus) thereafter caused an increase in the frequency of detection of sMMO genes. Detection of TOD genes declined during the process, and eventually they were non-detectable by the final treatment, suggesting that methanotrophs displaced the TOD gene containing heterotrophs. Active transcription of sMMO and TOD was evidenced by hybridization to mRNA. These analyses combined with results showing the concomitant decline in TCE concentrations, increases in chloride concentration and increases in methanotroph viable counts, provide multiple lines of evidence that TCE remediation was caused specifically by methanotrophs. Our results suggest that sMMO genes are responsible for most, if not all, of the observed biodegradation of TCE. This study demonstrates that the use of nucleic acid analytical methods provided a gene specific assessment of the effects of in situ treatment technologies.

Hazen, Terry C.; Chakraborty, Romy; Fleming, James M.; Gregory, Ingrid R.; Bowman, John P.; Jimenez, Luis; Zhang, Dai; Pfiffner, Susan M.; Brockman, Fred J.; Sayler, Gary S.

2009-03-15T23:59:59.000Z

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Ionizing Radiation Activates AMP-Activated Kinase (AMPK): A Target for Radiosensitization of Human Cancer Cells  

SciTech Connect (OSTI)

Purpose: Adenosine monophosphate (AMP)-activated kinase (AMPK) is a molecular energy sensor regulated by the tumor suppressor LKB1. Starvation and growth factors activate AMPK through the DNA damage sensor ataxia-telangiectasia mutated (ATM). We explored the regulation of AMPK by ionizing radiation (IR) and its role as a target for radiosensitization of human cancer cells. Methods and Materials: Lung, prostate, and breast cancer cells were treated with IR (2-8 Gy) after incubation with either ATM or AMPK inhibitors or the AMPK activator metformin. Then, cells were subjected to either lysis and immunoblotting, immunofluorescence microscopy, clonogenic survival assays, or cell cycle analysis. Results: IR induced a robust phosphorylation and activation of AMPK in all tumor cells, independent of LKB1. IR activated AMPK first in the nucleus, and this extended later into cytoplasm. The ATM inhibitor KU-55933 blocked IR activation of AMPK. AMPK inhibition with Compound C or anti-AMPK {alpha} subunit small interfering RNA (siRNA) blocked IR induction of the cell cycle regulators p53 and p21{sup waf/cip} as well as the IR-induced G2/M arrest. Compound C caused resistance to IR, increasing the surviving fraction after 2 Gy, but the anti-diabetic drug metformin enhanced IR activation of AMPK and lowered the surviving fraction after 2 Gy further. Conclusions: We provide evidence that IR activates AMPK in human cancer cells in an LKB1-independent manner, leading to induction of p21{sup waf/cip} and regulation of the cell cycle and survival. AMPK appears to (1) participate in an ATM-AMPK-p21{sup waf/cip} pathway, (2) be involved in regulation of the IR-induced G2/M checkpoint, and (3) may be targeted by metformin to enhance IR responses.

Sanli, Toran; Rashid, Ayesha; Liu Caiqiong [Department of Oncology, Juravinski Cancer Center and McMaster University, Hamilton, Ontario (Canada)

2010-09-01T23:59:59.000Z

422

Growth of Cosmic Structure: Probing Dark Energy Beyond Expansion  

DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

The quantity and quality of cosmic structure observations have greatly accelerated in recent years, and further leaps forward will be facilitated by imminent projects. These will enable us to map the evolution of dark and baryonic matter density fluctuations over cosmic history. The way that these fluctuations vary over space and time is sensitive to several pieces of fundamental physics: the primordial perturbations generated by GUT-scale physics; neutrino masses and interactions; the nature of dark matter and dark energy. We focus on the last of these here: the ways that combining probes of growth with those of the cosmic expansion such as distance-redshift relations will pin down the mechanism driving the acceleration of the Universe.

Huterer D.; May M.; Kirkby, D.; Bean, R.; Connolly, A.; Dawson, K; Dodelson, S.; Evrard, A.; Jain, B.; Jarvis, M.; Linder, E.; Mandelbaum, R.; Raccanelli, A.; Reid, B; Rozo, E.; Schmidt, F.; Sehgal, N.; Slosar, A.; Van Engelen, A.; Wu, H-Y.; Zhao, G.

2015-03-01T23:59:59.000Z

423

Method for identifying and probing phase transitions in materials  

DOE Patents [OSTI]

The present invention includes a method for identifying and probing phase transitions in materials. A polymorphic material capable of existing in at least one non-centrosymmetric phase is interrogated with a beam of laser light at a chosen wavelength and frequency. A phase transition is induced in the material while it is interrogated. The intensity of light scattered by the material and having a wavelength equal to one half the wavelength of the interrogating laser light is detected. If the phase transition results in the production of a non-centrosymmetric phase, the intensity of this scattered light increases; if the phase transition results in the disappearance of a non-centrosymmetric phase, the intensity of this scattered light decreases.

Asay, Blaine W. (Los Alamos, NM); Henson, Bryan F. (Los Alamos, NM); Sander, Robert K. (Los Alamos, NM); Robinson, Jeanne M. (Los Alamos, NM); Son, Steven F. (Los Alamos, NM); Dickson, Peter M. (Los Alamos, NM)

2002-01-01T23:59:59.000Z

424

Arcs statistics as a probe of galaxy evolution  

E-Print Network [OSTI]

Number counts and redshift distribution of gravitational arcs are computed in the field of massive clusters of galaxies to probe the universe at high redshift. Using an accurate modelling for the cluster mass distribution and a model for the spectrophotometric evolution of galaxies, the redshift distribution of gravitational arclets is computed in the field of cluster Abell 2218 and in the Hubble Deep Field where a cluster is artificially located. Counts are very well reproduced in the B band but an important population appears at high redshift which is not seen in deep spectroscopic surveys. Unfortunately, the very high sensitivity of the counts with respect to the model for galaxy evolution and to the mass distribution prevents from estimating the cosmological parameters with arcs statistics. Future works have to concentrate on high redshift clusters and take advantage of objects with smaller distortions.

J. Bezecourt

1998-02-09T23:59:59.000Z

425

FIVE-YEAR WILKINSON MICROWAVE ANISOTROPY PROBE OBSERVATIONS: SOURCE CATALOG  

SciTech Connect (OSTI)

We present the list of point sources found in the Wilkinson Microwave Anisotropy Probe (WMAP) five-year maps. The technique used in the first-year and three-year analyses now finds 390 point sources, and the five-year source catalog is complete for regions of the sky away from the Galactic plane to a 2 Jy limit, with SNR >4.7 in all bands in the least covered parts of the sky. The noise at high frequencies is still mainly radiometer noise, but at low frequencies the cosmic microwave background (CMB) anisotropy is the largest uncertainty. A separate search of CMB-free V-W maps finds 99 sources of which all but one can be identified with known radio sources. The sources seen by WMAP are not strongly polarized. Many of the WMAP sources show significant variability from year to year, with more than a 2:1 range between the minimum and maximum fluxes.

Wright, E. L.; Chen, X. [UCLA Physics and Astronomy, P.O. Box 951547, Los Angeles, CA 90095-1547 (United States); Odegard, N.; Hill, R. S.; Weiland, J. L. [Adnet Systems, Inc., 7515 Mission Dr., Suite A100, Lanham, MD 20706 (United States); Bennett, C. L.; Gold, B.; Larson, D. [Department of Physics and Astronomy, Johns Hopkins University, 3400 N. Charles St., Baltimore, MD 21218-2686 (United States); Hinshaw, G.; Wollack, E.; Kogut, A. [Code 665, NASA/Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Jarosik, N.; Page, L.; Dunkley, J. [Department of Physics, Jadwin Hall, Princeton University, Princeton, NJ 08544-0708 (United States); Komatsu, E. [Department of Astronomy, University of Texas, Austin, 2511 Speedway, RLM 15.306, Austin, TX 78712 (United States); Nolta, M. R. [Canadian Institute for Theoretical Astrophysics, University of Toronto, 60 St. George St., Toronto, ON M5S 3H8 (Canada); Spergel, D. N. [Department of Astrophysical Sciences, Peyton Hall, Princeton University, Princeton, NJ 08544-1001 (United States); Halpern, M. [Department of Physics and Astronomy, University of British Columbia, Vancouver, BC V6T 1Z1 (Canada); Limon, M. [Columbia Astrophysics Laboratory, 550 W. 120th St., Mail Code 5247, New York, NY 10027-6902 (United States); Meyer, S. S. [Departments of Astrophysics and Physics, KICP and EFI, University of Chicago, Chicago, IL 60637 (United States)], E-mail: wright@astro.ucla.edu (and others)

2009-02-15T23:59:59.000Z

426

Scanning Hall probe microscopy of a diluted magnetic semiconductor  

SciTech Connect (OSTI)

We have measured the micromagnetic properties of a diluted magnetic semiconductor as a function of temperature and applied field with a scanning Hall probe microscope built in our laboratory. The design philosophy for this microscope and some details are described. The samples analyzed in this work are Ga{sub 0.94}Mn{sub 0.06}As films grown by molecular beam epitaxy. We find that the magnetic domains are 2-4 mum wide and fairly stable with temperature. Magnetic clusters are observed above T{sub C}, which we ascribe to MnAs defects too small and sparse to be detected by a superconducting quantum interference device magnetometer.

Kweon, Seongsoo [Materials Science and Engineering, University of Texas at Austin, Austin, Texas 78712 (United States); Samarth, Nitin [Physics Department, Penn State University, University Park, Pennsylvania 16802 (United States); Lozanne, Alex de [Materials Science and Engineering, University of Texas at Austin, Austin, Texas 78712 (United States); Department of Physics, University of Texas at Austin, Austin, Texas 78712 (United States)

2009-05-01T23:59:59.000Z

427

Radio-frequency probes of Antarctic ice at South Pole  

E-Print Network [OSTI]

System Sciences O p e n A cce ss Discussions Radio-frequency probes of Antarctic ice at South Pole D. Besson1 and I. Kravchenko2 1University of Kansas, Department of Physics and Astronomy, Lawrence, KS 66045-7582, USA 2University of Nebraska – Lincoln... to successive waveforms. Each 0.5 meter division horizontally corresponds to approximately 5 ns. -20 -10 0 10 20 Rx v ol ta ge ( V, a ft er s ca li ng ; of fs e Time (ns, relative) 6 us echo (Vx1) 9.6 us echo (Vx1.3) 13.9 us echo (Vx3.5) 17.2 us echo (Vx10...

Besson, David Zeke; Kravchenko, I.

2013-05-16T23:59:59.000Z

428

Probing the nucleon structure with SIDIS at Jefferson Lab  

SciTech Connect (OSTI)

In recent years, measurements of azimuthal moments of polarized hadronic cross sections in hard processes have emerged as a powerful tool to probe nucleon structure. Many experiments worldwide are currently trying to pin down various effects related to nucleon structure through Semi-Inclusive Deep-Inelastic Scattering (SIDIS). Azimuthal distributions of final-state particles in semi-inclusive deep inelastic scattering, in particular, are sensitive to the orbital motion of quarks and play an important role in the study of Transverse Momentum Dependent parton distribution functions (TMDs) of quarks in the nucleon. The CLAS spectrometer, installed in Hall-B at Jefferson Lab, has collected semi-inclusive data using the CEBAF 6 GeV polarized electron beam on polarized solid NH{sub 3} and ND{sub 3} targets. An overview of these measurements is presented.

Pereira, Sergio Anafalos [INFN-Frascati

2013-01-01T23:59:59.000Z

429

Scanning probe microscopy: Sulfate minerals in scales and cements  

SciTech Connect (OSTI)

The principles of scanning probe microscopy (SPM) are illustrated with examples from oilfield mineralogy, particularly emphasizing sulfate minerals involved in scale formation and cement hydration chemistry. The topography of the (010) cleavage surface of gypsum observed by atomic force microscopy shows atomically flat terraces separated by shallow steps often only one unit cell high. SPM allows direct observation of processes on mineral surfaces while they are in contact with solutions. The dissolution etching and crystal growth of gypsum and barite are discussed and rates of step migration estimated. The orientation of steps is related to the crystallographic axes. The action of phosphonate crystal growth inhibitor on gypsum and of a chelating scale solvent on barite are also shown. The multiphase microstructure of an oilwell cement clinker is described in relation to its hydration chemistry in contact with water and its reaction with sulfate ions.

Hall, C. [Schlumberger Cambridge Research (United Kingdom)

1995-11-01T23:59:59.000Z

430

Nondestructive millimeter wave imaging and spectroscopy using dielectric focusing probes  

SciTech Connect (OSTI)

A tool for interrogating objects over a wide band of frequencies with subwavelength resolution at small standoff distances (near field region) in the transmission mode using a single source and detector measurement setup in the millimeter wave band is presented. The design utilizes optics like principles for guiding electromagnetic millimeter waves from large cross-sectional areas to considerably smaller sub-wavelength areas. While plano-convex lenses can be used to focus waves to a fine resolution, they usually require a large stand-off distance thus resulting in alignment and spacing issues. The design procedure and simulation analysis of the focusing probes are presented in this study along with experimental verification of performance and imaging and spectroscopy examples. Nondestructive evaluation will find benefit from such an apparatus including biological tissue imaging, electronic package integrity testing, composite dielectric structure evaluation for defects and microfluidic sensing.

Hejase, Jose A.; Shane, Steven S.; Park, Kyoung Y.; Chahal, Premjeet [Terahertz Systems Laboratory (TeSLa) - Department of Electrical and Computer Engineering, Michigan State University, East Lansing, MI 48823 (United States)

2014-02-18T23:59:59.000Z

431

Method and apparatus for probing relative volume fractions  

DOE Patents [OSTI]

A relative volume fraction probe particularly for use in a multiphase fluid system includes two parallel conductive paths defining therebetween a sample zone within the system. A generating unit generates time varying electrical signals which are inserted into one of the two parallel conductive paths. A time domain reflectometer receives the time varying electrical signals returned by the second of the two parallel conductive paths and, responsive thereto, outputs a curve of impedance versus distance. An analysis unit then calculates the area under the curve, subtracts the calculated area from an area produced when the sample zone consists entirely of material of a first fluid phase, and divides this calculated difference by the difference between an area produced when the sample zone consists entirely of material of the first fluid phase and an area produced when the sample zone consists entirely of material of a second fluid phase. The result is the volume fraction. 9 figs.

Jandrasits, W.G.; Kikta, T.J.

1998-03-17T23:59:59.000Z

432

Improving TCP Performance over Networks with Wireless Components using ``Probing Devices''  

E-Print Network [OSTI]

, but the actual ``sending window'' never exceeds the minimum of the advertised and congestion window. Standard TCP­Tahoe and TCP­Reno. We show that, this way, standard TCP can improve its per­ formance without requiring any the design limitations of the probing device itself. The aggressive or conservative nature of the probing

Tsaoussidis, Vassilis

433

Identification of Avalanche Precursors by Acoustic Probing in the Bulk of Tilted Granular Layers  

E-Print Network [OSTI]

Identification of Avalanche Precursors by Acoustic Probing in the Bulk of Tilted Granular Layers M simultaneously caracterize precursors on the free surface with an optical method and in the bulk with acoustic to probe rearrangements in the bulk of the granular material. A linear method can also be used provided

Paris-Sud XI, Université de

434

[Frontiers in Bioscience 4795-4808, May 1, 2008] Probing protein aggregation using discrete molecular dynamics  

E-Print Network [OSTI]

tool to study protein misfolding 5.1. Probing conformational changes in beta2-microglobulin leading predictor probing protein domain-swapping 5.6. iFold webserver as a tool to study protein aggregation 6 of fibrillar proteinaceous deposits termed "senile amyloid plaques" is characteristic of the Alzheimer

Dokholyan, Nikolay V.

435

Note: On the measurement of plasma potential fluctuations using emissive probes  

SciTech Connect (OSTI)

In this Note, it is pointed out that emissive probes cannot be used to directly and reliably measure plasma potential fluctuations. An experimentally validated model demonstrates indeed that the floating potential fluctuations of an emissive probe which floats at the mean plasma potential depend not only on the plasma potential fluctuations but also on electron density and temperature fluctuations.

Bousselin, G., E-mail: guillaume.bousselin@ens-lyon.fr; Lemoine, N.; Cavalier, J.; Heuraux, S.; Bonhomme, G. [IJL, Université de Lorraine, CNRS (UMR 7198), 54506 Vandoeuvre (France)] [IJL, Université de Lorraine, CNRS (UMR 7198), 54506 Vandoeuvre (France)

2014-05-15T23:59:59.000Z

436

Using Downhole Probes to Locate and Characterize Buried Transuranic and Mixed Low Level Waste  

SciTech Connect (OSTI)

Borehole logging probes were developed and tested to locate and quantify transuranic elements in subsurface disposal areas and in contaminated sites at USDOE Weapons Complex sites. A new method of measuring very high levels of chlroine in the subsurface was developed using pulsed neutron technology from oilfield applications. The probes were demonstrated at the Hanford site in wells containing plutonium and other contaminants.

Steinman, Donald K; Bramblett, Richard L; Hertzog, Russel C

2012-06-25T23:59:59.000Z

437

Data Mining Empowers the Generation of a Novel Class of Chromosome-specific DNA Probes  

SciTech Connect (OSTI)

Probes that allow accurate delineation of chromosome-specific DNA sequences in interphase or metaphase cell nuclei have become important clinical tools that deliver life-saving information about the gender or chromosomal make-up of a product of conception or the probability of an embryo to implant, as well as the definition of tumor-specific genetic signatures. Often such highly specific DNA probes are proprietary in nature and have been the result of extensive probe selection and optimization procedures. We describe a novel approach that eliminates costly and time consuming probe selection and testing by applying data mining and common bioinformatics tools. Similar to a rational drug design process in which drug-protein interactions are modeled in the computer, the rational probe design described here uses a set of criteria and publicly available bioinformatics software to select the desired probe molecules from libraries comprised of hundreds of thousands of probe molecules. Examples describe the selection of DNA probes for the human X and Y chromosomes, both with unprecedented performance, but in a similar fashion, this approach can be applied to other chromosomes or species.

Zeng, Hui; Weier, Heinz-Ulrich G.; Kwan, Johnson; Wang, Mei; O'Brien, Benjamin

2011-03-08T23:59:59.000Z

438

Four-point probe characterization of 4H silicon carbide N. Chandra a,  

E-Print Network [OSTI]

Four-point probe characterization of 4H silicon carbide N. Chandra a, , V. Sharma a , G.Y. Chung b carbide Four-point probe Thermionic-field emission Contact resistance a b s t r a c t We report on four

Schroder, Dieter K.

439

Fast, long-scan-range pump-probe measurement based on asynchronous sampling using a dual-  

E-Print Network [OSTI]

Fast, long-scan-range pump-probe measurement based on asynchronous sampling using a dual-scan-range pump-probe scheme is experimentally demonstrated using a dual-wavelength passively mode- locked fiber. 134(25), 10569­10583 (2012). 4. A. Schmidt, M. Chiesa, X. Chen, and G. Chen, "An optical pump

Wu, Shin-Tson

440

Coherent control of pump-probe signals of helical structures by adaptive pulse polarizations  

E-Print Network [OSTI]

Coherent control of pump-probe signals of helical structures by adaptive pulse polarizations Dmitri The simplification of the pump-probe spectrum of excitons by pure-phase-polarization pulse shaping is investigated components of the pump, holding its total spectral and temporal intensity profiles fixed. Genetic

Mukamel, Shaul

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Multiple Exciton Coherence Sizes in Photosynthetic Antenna Complexes viewed by Pump-Probe Spectroscopy  

E-Print Network [OSTI]

Multiple Exciton Coherence Sizes in Photosynthetic Antenna Complexes viewed by Pump, 1996X The pump-probe signal from the light-harvesting antenna LH2 of purple bacteria is analyzed using absorption,4,5 pump-probe,11-16 and three pulse echoes.8,17 These measurements show ultrafast energy transfer

Mukamel, Shaul

442

The path inference filter: model-based low-latency map matching of probe  

E-Print Network [OSTI]

of automation onboard vehicles have created a very fertile ground for GPS data sources from probe vehicles for example [4], and the paradigm of connected (and automated) vehicles does not automatically translateThe path inference filter: model-based low-latency map matching of probe vehicle data Timothy

Abbeel, Pieter

443

MULTIPROBE EXPLORATION OF THE GIANT PLANETS SHALLOW PROBES Sushil K. Atreya(1)  

E-Print Network [OSTI]

, University of Michigan, Ann Arbor, MI 48109-2143, USA, Email: atreya@umich.edu (2) Institute for Astronomy, University of Hawaii, Honolulu, HI 96822, USA (3) Southwest Research Institute, San Antonio, Texas, TX 78228 about 10 bars. At the ice-giants, Uranus and Neptune, neither probes ­ even deep probes ­ nor radiometry

Atreya, Sushil

444

Probing the electronic structure and optical response of a graphene quantum disk supported on monolayer graphene  

E-Print Network [OSTI]

Probing the electronic structure and optical response of a graphene quantum disk supported on monolayer graphene This article has been downloaded from IOPscience. Please scroll down to see the full text.1088/0953-8984/24/31/314213 Probing the electronic structure and optical response of a graphene quantum disk supported on monolayer

Pennycook, Steve

445

Three envelope approach for ultrafast pulse characterization in a pump-probe experiment  

E-Print Network [OSTI]

Three envelope approach for ultrafast pulse characterization in a pump-probe experiment Balakishore of temporally identical ultrashort pulses at the focal point in a pump-probe experiment for potential use, fundamental, and second harmonic spectra, combined with an error minimization pulse retrieval scheme

446

Water at the Surfaces of Aligned Phospholipid Multibilayer Model Membranes Probed with Ultrafast Vibrational  

E-Print Network [OSTI]

Water at the Surfaces of Aligned Phospholipid Multibilayer Model Membranes Probed with Ultrafast@stanford.edu Abstract: The dynamics of water at the surface of artificial membranes composed of aligned multibilayers pump-probe spectroscopy. The experiments are performed at various hydration levels, x ) 2 - 16 water

Fayer, Michael D.

447

Structural evaluation of thermocouple probes for 241-AZ-101 waste tank  

SciTech Connect (OSTI)

This document reports on the structural analysis of the thermocouple probe to be installed in 241-AZ-101 waste tank. The thermocouple probe is analyzed for normal pump mixing operation and potential earthquake induced loads required by the Hanford Site Design Criteria SDC-4.1.

Kanjilal, S.K.

1994-12-06T23:59:59.000Z

448

Using phylogenetic probes for quantification of stable isotope labeling and microbial community analysis  

DOE Patents [OSTI]

Herein is described methods for a high-sensitivity means to measure the incorporation of stable isotope labeled substrates into RNA following stable isotope probing experiments (SIP). RNA is hybridized to a set of probes such as phylogenetic microarrays and isotope incorporation is quantified such as by secondary ion mass spectrometer imaging (NanoSIMS).

Brodie, Eoin L; DeSantis, Todd Z; Karaoz, Ulas; Andersen, Gary L

2014-12-09T23:59:59.000Z

449

Calibration and data reduction algorithms for non-conventional multi-hole pressure probes  

E-Print Network [OSTI]

. Moreover, they eliminate the need to separate the measurement domain of a probe to "low-angle" and "high-angle" regimes, typical in conventional 5- and 7-hole-probe algorithms that require two different sets of pressure coefficient definitions...

Ramakrishnan, Vijay

2004-09-30T23:59:59.000Z

450

Absorption free superluminal light propagation in a three level pump-probe system  

E-Print Network [OSTI]

We investigate the dispersion and the absorption properties of a weak probe field in a three-level pump-probe atomic system. It is shown that the slope of dispersion changes from positive to negative just with the intensity of the coherent or indirect incoherent pumping fields. It is demonstrated that the absorption free superluminal light propagation is appeared in this system.

M. Mahmoudi; S. Worya Rabiei; L. Ebrahimi Zohravi; M. Sahrai

2007-11-21T23:59:59.000Z

451

Active Cores in Deep Fields  

E-Print Network [OSTI]

Deep field observations are an essential tool to probe the cosmological evolution of galaxies. In this context, X-ray deep fields provide information about some of the most energetic cosmological objects: active galactic nuclei (AGN). Astronomers are interested in detecting sufficient numbers of AGN to probe the accretion history at high redshift. This talk gives an overview of the knowledge resulting from a highly complete soft X-ray selected sample collected with ROSAT, XMM-Newton and Chandra deep fields. The principal outcome based on X-ray luminosity functions and space density evolution studies is that low-luminosity AGN evolve in a dramatically different way from high-luminosity AGN: The most luminous quasars perform at significantly earlier cosmic times and are most numerous in a unit volume at cosmological redshift z~2. In contrast, low-luminosity AGN evolve later and their space density peaks at z~0.7. This finding is also interpreted as an anti-hierarchical growth of supermassive black holes in the Universe. Comparing this with star formation rate history studies one concludes that supermassive black holes enter the cosmic stage before the bulk of the first stars. Therefore, first solutions of the so-called hen-egg problem are suggested. Finally, status developments and expectations of ongoing and future extended observations such as the XMM-COSMOS project are highlighted.

G. Hasinger; A. Mueller

2005-10-14T23:59:59.000Z

452

Focusing in Arthurs-Kelly-type Joint Measurements with Correlated Probes  

E-Print Network [OSTI]

Joint approximate measurement schemes of position and momentum provide us with a means of inferring pieces of complementary information if we allow for the irreducible noise required by quantum theory. One such scheme is given by the Arthurs-Kelly model, where information about a system is extracted via indirect probe measurements. So far, only separable uncorrelated probes have been considered. Here, following Di Lorenzo (PRL 110, 120403 (2013)), we extend this model to both entangled and classically correlated probes, achieving full generality. We find the measured observable of the system under consideration to be covariant under phase space translations, and show that correlated probes can produce more precise joint measurement outcomes of position and momentum than the same probes can achieve if applied alone to realize a position or momentum measurement. Contrary to Di Lorenzo's claim, we find that nevertheless there are no violations of Heisenberg's measurement uncertainty relations in these generalized Arthurs-Kelly models.

Thomas J Bullock; Paul Busch

2014-09-16T23:59:59.000Z

453

Probing nonlinear magnetization dynamics in Fe/MgO(001) film by all optical pump-probe technique  

SciTech Connect (OSTI)

An all-optical pump-probe technique has been employed to investigate the nonlinear magnetization dynamics of a 10?nm Fe/MgO(001) thin film in time domain. The magnetization precession was excited by pump-laser pulses and modulated by laser fluence variations. With increasing the laser fluence up to 7.1 mJ/cm{sup 2}, in addition to the uniform precession mode, a second harmonic signal was detected. The time evolution of the second harmonic signal was obtained in time-frequency domain. Based on the Landau-Lifshitz-Gilbert equation, the numerical simulation was performed to reproduce the observed the frequency doubling behaviors in Fe/MgO(001) film.

He, Wei; Hu, Bo; Zhang, Xiang-Qun; Cheng, Zhao-Hua, E-mail: zhcheng@iphy.ac.cn [State Key Laboratory of Magnetism and Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Zhan, Qing-Feng [Key Laboratory of Magnetic Materials and Devices, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, Zhejiang 315201 (China)

2014-04-07T23:59:59.000Z

454

Probing New Physics with Underground Accelerators and Radioactive Sources  

E-Print Network [OSTI]

New light, weakly coupled particles can be efficiently produced at existing and future high-intensity accelerators and radioactive sources in deep underground laboratories. Once produced, these particles can scatter or decay in large neutrino detectors (e.g Super-K and Borexino) housed in the same facilities. We discuss the production of weakly coupled scalars $\\phi$ via nuclear de-excitation of an excited element into the ground state in two viable concrete reactions: the decay of the $0^+$ excited state of $^{16}$O populated via a $(p,\\alpha)$ reaction on fluorine and from radioactive $^{144}$Ce decay where the scalar is produced in the de-excitation of $^{144}$Nd$^*$, which occurs along the decay chain. Subsequent scattering on electrons, $e(\\phi,\\gamma)e$, yields a mono-energetic signal that is observable in neutrino detectors. We show that this proposed experimental set-up can cover new territory for masses $250\\, {\\rm keV}\\leq m_\\phi \\leq 2 m_e$ and couplings to protons and electrons, $10^{-11} new physics component to the neutrino and nuclear astrophysics programs at underground facilities.

Eder Izaguirre; Gordan Krnjaic; Maxim Pospelov

2014-05-19T23:59:59.000Z

455

Catalyst activator  

DOE Patents [OSTI]

A catalyst activator particularly adapted for use in the activation of metal complexes of metals of Group 3-10 for polymerization of ethylenically unsaturated polymerizable monomers, especially olefins, comprising two Group 13 metal or metalloid atoms and a ligand structure including at least one bridging group connecting ligands on the two Group 13 metal or metalloid atoms.

McAdon, Mark H. (Midland, MI); Nickias, Peter N. (Midland, MI); Marks, Tobin J. (Evanston, IL); Schwartz, David J. (Lake Jackson, TX)

2001-01-01T23:59:59.000Z

456

Using Rare Gas Permeation to Probe Methanol Diffusion near the...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

at temperatures just above the glass transition. The diffusivity near the glass transition is characterized by an activation energy and prefactor that are seven and 1030...

457

Sub-GeV flashes in $?-$ray burst afterglows as probes of underlying bright UV flares  

E-Print Network [OSTI]

Bright optical and X-ray flares have been observed in many Gamma-ray Burst (GRB) afterglows. These flares have been attributed to late activity of the central engine. In most cases the peak energy is not known and it is possible and even likely that there is a significant far-ultraviolet component. These far-ultraviolet photons escape our detection because they are absorbed by the neutral hydrogen before reaching Earth. However, these photons cross the blast wave produced by the ejecta that have powered the initial GRB. They can be inverse Compton upscattered by hot electrons within this blast wave. This process will produce a strong sub-GeV flare that follows the high energy (soft X-ray) tail of the far-UV flare but lasts much longer and can be detected by the upcoming {\\em Gamma-Ray Large Area Telescope} (GLAST) satellite. This signature can be used to probe the spectrum of the underlying far-ultraviolet flare. The extra cooling produced by this inverse Compton process can lower the X-ray emissivity of the forward shock and explain the unexpected low early X-ray flux seen in many GRBs.

Yizhong Fan; Tsvi Piran

2006-04-17T23:59:59.000Z

458

Probing conformational states of glutaryl-CoA dehydrogenase by fragment screening  

SciTech Connect (OSTI)

Glutaric acidemia type 1 is an inherited metabolic disorder which can cause macrocephaly, muscular rigidity, spastic paralysis and other progressive movement disorders in humans. The defects in glutaryl-CoA dehydrogenase (GCDH) associated with this disease are thought to increase holoenzyme instability and reduce cofactor binding. Here, the first structural analysis of a GCDH enzyme in the absence of the cofactor flavin adenine dinucleotide (FAD) is reported. The apo structure of GCDH from Burkholderia pseudomallei reveals a loss of secondary structure and increased disorder in the FAD-binding pocket relative to the ternary complex of the highly homologous human GCDH. After conducting a fragment-based screen, four small molecules were identified which bind to GCDH from B. pseudomallei. Complex structures were determined for these fragments, which cause backbone and side-chain perturbations to key active-site residues. Structural insights from this investigation highlight differences from apo GCDH and the utility of small-molecular fragments as chemical probes for capturing alternative conformational states of preformed protein crystals.

Begley, Darren W.; Davies, Douglas R.; Hartley, Robert C.; Hewitt, Stephen N.; Rychel, Amanda L.; Myler, Peter J.; Van Voorhis, Wesley C.; Staker, Bart L.; Stewart, Lance J. (Emerald)

2014-10-02T23:59:59.000Z

459

350-?m side-view optical probe for imaging the murine brain in vivo from the cortex to the hypothalamus  

E-Print Network [OSTI]

Miniature endoscopic probes offer a solution for deep brain imaging by overcoming the limited depth of intravital microscopy. We describe a small-diameter (350 ?m) graded-index optical probe with a side-view design for in ...

Kim, Jun Ki

460

Structure and Electrochemistry of LiNi1/3Co1/3-yMyMn1/3O2 (M=Ti, Al, Fe) Positive Electrode Materials  

SciTech Connect (OSTI)

A series of materials based on the LiNi1/3Co1/3-yMyMn1/3O2 (M = Ti,Al,Fe) system has been synthesized and examined structurally and electrochemically. It is found that the changes in electrochemical performance depend highly on the nature of the substituting atom and its effect on the crystal structure. Substitution with small amounts of Ti4+ (y = 1/12) leads to the formation of a high-capacity and high-rate positive electrode material. Iron substituted materials suffer from an increased antisite defect concentration and exhibit lower capacities and poor rate capabilities. Single-phase materials are found for LiNi1/3Co1/3-yAlyMn1/3O2 when y<_ 1/4 and all exhibit decreased capacities when cycled to 4.3 V. However, an increase in rate performance and cycle stability upon aluminum substitution is correlated with an improved lamellar structure.

Wilcox, James; Patoux, Sebastien; Doeff, Marca

2009-01-14T23:59:59.000Z

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Radiative rates for E1, E2, M1, and M2 transitions in the Br-like ions Sr IV, Y V, Zr VI, Nb VII, and Mo VIII  

E-Print Network [OSTI]

Energies and lifetimes are reported for the lowest 375 levels of five Br-like ions, namely Sr~IV, Y~V, Zr~VI, Nb~VII, and Mo~VIII, mostly belonging to the 4s$^2$4p$^5$, 4s$^2$4p$^4$4$\\ell$, 4s4p$^6$, 4s$^2$4p$^4$5$\\ell$, 4s$^2$4p$^3$4d$^2$, 4s4p$^5$4$\\ell$, and 4s4p$^5$5$\\ell$ configurations. Extensive configuration interaction has been included and the general-purpose relativistic atomic structure package ({\\sc grasp}) has been adopted for the calculations. Additionally, radiative rates are listed among these levels for all E1, E2, M1, and M2 transitions. From a comparison with the measurements, the majority of our energy levels are assessed to be accurate to better than 2\\%, although discrepancies between theory and experiment for a few are up to 6\\%. An accuracy assessment of the calculated radiative rates (and lifetimes) is more difficult, because no prior results exist for these ions.

Aggarwal, K M

2015-01-01T23:59:59.000Z

462

Supernova/Acceleration Probe: A Satellite Experiment to Study the Nature of the Dark Energy  

SciTech Connect (OSTI)

The Supernova/Acceleration Probe (SNAP) is a proposed space-based experiment designed to study the dark energy and alternative explanations of the acceleration of the Universes expansion by performing a series of complementary systematics-controlled astrophysical measurements. We here describe a self-consistent reference mission design that can accomplish this goal with the two leading measurement approaches being the Type Ia supernova Hubble diagram and a wide-area weak gravitational lensing survey. This design has been optimized to first order and is now under study for further modification and optimization. A 2-m three-mirror anastigmat wide-field telescope feeds a focal plane consisting of a 0.7 square-degree imager tiled with equal areas of optical CCDs and near infrared sensors, and a high efficiency low-resolution integral field spectrograph. The instrumentation suite provides simultaneous discovery and light-curve measurements of supernovae and then can target individual objects for detailed spectral characterization. The SNAP mission will discover thousands of Type Ia supernovae out to z = 3 and will obtain high-signal-to-noise calibrated light-curves and spectra for a subset of > 2000 supernovae at redshifts between z = 0.1 and 1.7 in a northern field and in a southern field. A wide-field survey covering one thousand square degrees in both northern and southern fields resolves {approx} 100 galaxies per square arcminute, or a total of more than 300 million galaxies. With the PSF stability afforded by a space observatory, SNAP will provide precise and accurate measurements of gravitational lensing. The high-quality data available in space, combined with the large sample of supernovae, will enable stringent control of systematic uncertainties. The resulting data set will be used to determine the energy density of dark energy and parameters that describe its dynamical behavior. The data also provide a direct test of theoretical models for the dark energy, including discrimination of vacuum energy due to the cosmological constant and various classes of dynamical scalar fields. If we assume we live in a cosmological-constant-dominated Universe, the matter density, dark energy density, and flatness of space can all be measured with SNAP supernova and weak-lensing measurements to a systematics-limited accuracy of 1 percent. For a flat universe, the density-to-pressure ratio of dark energy or equation of state w(z) can be similarly measured to 5 percent for the present value w0 and {approx} 0.1 for the time variation w' is defined as dw/d ln a bar z = 1. For a fiducial SUGRA-inspired universe, w0 and w' can be measured to an even tighter uncertainty of 0.03 and 0.06 respectively. Note that no external priors are needed. As more accurate theoretical predictions for the small-scale weak-lensing shear develop, the conservative estimates adopted here for space-based systematics should improve, allowing even tighter constraints. While the survey strategy is tailored for supernova and weak gravitational lensing observations, the large survey area, depth, spatial resolution, time-sampling, and nine-band optical to NIR photometry will support additional independent and/or complementary dark-energy measurement approaches as well as a broad range of auxiliary science programs.

Aldering, G.; Althouse, W.; Amanullah, R.; Annis, J.; Astier, P.; Baltay, C.; Barrelet, E.; Basa, E.; Bebek, C.; Bergstrom, L.; Bernstein, G.; Bester, M.; Bigelow, C.; Blandford, R.; Bohlin, R.; Bonissent, A.; Bower, C.; Brown, M.; Campbell, M.; Carithers, W.; Commins, E.; Craig, W.; Day, C.; DeJongh, F.; Deustua, S.; Diehl, T.; Dodelson, S.; Ealet, A.; Ellis, R.; Emmet, W.; Fouchez, D.; Frieman, J.; Fruchter, A.; Gerdes, D.; Gladney, L.; Goldhaber, G.; Goobar, A.; Groom, D.; Heetderks, H.; Hoff, M.; Holland, S.; Huffer, M.; Hui, L.; Huterer, D.; Jain, B.; Jelinsky, P.; Karcher, A.; Kent, S.; Kahn, S.; Kim, A.; Kolbe, W.; Krieger, B.; Kushner, G.; Kuznetsova, N.; Lafever, R.; Lamoureux, J.; Lampton, M.; Le Fevre, O.; Levi, M.; Limon, P.; Lin, H.; Linder, E.; Loken, S.; Lorenzon, W.; Malina, R.; Marriner, J.; Marshall, P.; Massey, R.; Mazure, A.; McKay, T.; McKee, S.; Miquel, R.; Morgan, N.; Mortsell, E.; Mostek, N.; Mufson, S.; Musser, J.; Nugent, P.; Oluseyi, H.; Pain, R.; Palaio, N.; Pankow, D.; Peoples, J.; Perlmutter, S.; Prieto, E.; Rabinowitz, D.; Refregier, A.; Rhodes, J.; Roe, N.; Rusin, D.; Scarpine, V.; Schubnell, M.; Sholl, M.; Samdja, G.; Smith, R.M.; Smoot, G.; Snyder, J.; Spadafora, A.; Stebbine, A.; Stoughton, C.; Szymkowiak, A.; Tarle, G.; Taylor, K.; Tilquin, A.; Tomasch, A.; Tucker, D.; Vincent, D.; von der Lippe, H.; Walder, J-P.; Wang, G.; Wester, W.

2004-05-12T23:59:59.000Z

463

Supporting information Figure S1: Pump-rePump-Probe kinetics of peridinin in methanol. Peridinin was excited at  

E-Print Network [OSTI]

Supporting information Figure S1: Pump-rePump-Probe kinetics of peridinin in methanol. Peridinin was excited at 400-nm, and then repumped, at a delay of 1 ps, by pulses of 620-nm. (A) Pump-Probe (blue), Pump-rePump. The inset zooms on the repump. (C): Pump-Probe (blue) and Pump-rePump-Probe (red) and (D) OD (black) spectra

van Stokkum, Ivo

464

Method and means for a spatial and temporal probe for laser-generated plumes based on density gradients  

DOE Patents [OSTI]

A method and means are disclosed for a spatial and temporal probe for laser generated plumes based on density gradients includes generation of a plume of vaporized material from a surface by an energy source. The probe laser beam is positioned so that the plume passes through the probe laser beam. Movement of the probe laser beam caused by refraction from the density gradient of the plume is monitored. Spatial and temporal information, correlated to one another, is then derived. 15 figs.

Yeung, E.S.; Chen, G.

1990-05-01T23:59:59.000Z

465

Calorimetric measurements of nuclear heating in small probes of plasma-facing materials  

SciTech Connect (OSTI)

Direct measurements of nuclear heating in small probes of materials subjected to D-T neutrons from an accelerator based source were initiated during 1989 under USDOE/JAERI collaborative program. A calorimetric technique was utilized to make these measurements. The probes of plasma facing materials, among others, were kept very close, {approximately}3 to {approximately}7 cm, to the neutron source inside an evacuated vacuum chamber. A typical probe measured 20 mm in diameter by 20 mm in length. Typical source intensity was {approximately}2 x 10{sup 12} n/s. The temperature changes in the probe medium were detected by thermal sensors spatially distributed in the probe. The thermal sensors included bead-thermistors, and platinum RTD`s. The change in resistance of a thermal sensor due to onset of nuclear heating was picked up by an automated data acquisition and control system that included a highly sensitive digital voltmeter that had a resolution of 100 nV in voltage range of 300 mV or less. Usually, an individual probe was subjected to spaced neutron pulses of time duration 3 m to 10 m. Two consecutive source neutron pulses were separated by a cooling interval of almost the same duration as that of a source pulse. This approach made it possible to clearly distinguish between the heating and drift phases of the probe medium, on one hand, and to ascertain and verify the reproducibility of measured heating rates from one neutron pulse to another, on the other hand.

Kumar, A.; Abdou, M.A.; Youssef, M.Z. [Univ. of California, Los Angeles, CA (United States)] [and others

1994-12-31T23:59:59.000Z

466

Colloids in active fluids: Anomalous micro-rheology and negative drag  

E-Print Network [OSTI]

We simulate an experiment in which a colloidal probe is pulled through an active nematic fluid. We find that the drag on the particle is non-Stokesian (not proportional to its radius). Strikingly, a large enough particle in contractile fluid (such as an actomyosin gel) can show negative viscous drag in steady state: the particle moves in the opposite direction to the externally applied force. We explain this, and the qualitative trends seen in our simulations, in terms of the disruption of orientational order around the probe particle and the resulting modifications to the active stress.

G. Foffano; J. S. Lintuvuori; K. Stratford; M. E. Cates; D. Marenduzzo

2012-09-03T23:59:59.000Z

467

The Square Kilometre Array: A new probe of cosmic magnetism  

E-Print Network [OSTI]

Magnetic fields are a fundamental part of many astrophysical phenomena, but the evolution, structure and origin of magnetic fields are still unresolved problems in physics and astrophysics. When and how were the first fields generated? Are present-day magnetic fields the result of standard dynamo action, or do they represent rapid or recent field amplification through other processes? What role do magnetic fields play in turbulence, cosmic ray acceleration and structure formation? I explain how the Square Kilometre Array (SKA), a next-generation radio telescope, can deliver stunning new data-sets that will address these currently unanswered issues. The foundation for these experiments will be an all-sky survey of rotation measures, in which Faraday rotation toward >10^7 background sources will provide a dense grid for probing magnetism in the Milky Way, nearby galaxies, and in distant galaxies, clusters and protogalaxies. Using these data, we can map out the evolution of magnetized structures from redshifts z > 3 to the present, can distinguish between different origins for seed magnetic fields in galaxies, and can develop a detailed model of the magnetic field geometry of the intergalactic medium and of the overall Universe. In addition, the SKA will certainly discover new magnetic phenomena beyond what we can currently predict or imagine.

Bryan M. Gaensler

2006-03-02T23:59:59.000Z

468

Raman fiber optic probe assembly for use in hostile environments  

DOE Patents [OSTI]

This invention provides a device for Raman spectroscopic measurement of composition and concentrations in a hostile environment by the use of a first fiber optic as a means of directing high intensity monochromatic light from a laser to the hostile environment and a second fiber optic to receive the lower intensity scattered light for transmittal to a monochromator for analysis. To avoid damage to the fiber optics, they are protected from the hostile environment. A preferred embodiment of the Raman fiber optic probe is able to obtain Raman spectra of corrosive gases and solutions at temperatures up to 600.degree. F. and pressures up to 2000 psi. The incident exciting fiber optic cable makes an angle of substantially 90.degree. with the collecting fiber optic cable. This 90.degree. geometry minimizes the Rayleigh scattering signal picked up by the collecting fiber, because the intensity of Rayleigh scattering is lowest in the direction perpendicular to the beam path of the exciting light and therefore a 90.degree. scattering geometry optimizes the signal to noise ratio.

Schmucker, John E. (Hurt, VA); Falk, Jon C. (Pittsburgh, PA); Archer, William B. (Bethel Park, PA); Blasi, Raymond J. (Harrison City, PA)

2000-01-01T23:59:59.000Z

469

Probing the nature of Dark Matter with the SKA  

E-Print Network [OSTI]

Dark Matter (DM) is a fundamental ingredient of our Universe and of structure formation, and yet its nature is elusive to astrophysical probes. Information on the nature and physical properties of the WIMP (neutralino) DM (the leading candidate for a cosmologically relevant DM) can be obtained by studying the astrophysical signals of their annihilation/decay. Among the various e.m. signals, secondary electrons produced by neutralino annihilation generate synchrotron emission in the magnetized atmosphere of galaxy clusters and galaxies which could be observed as a diffuse radio emission (halo or haze) centered on the DM halo. A deep search for DM radio emission with SKA in local dwarf galaxies, galaxy regions with low star formation and galaxy clusters (with offset DM-baryonic distribution, like e.g. the Bullet cluster) can be very effective in constraining the neutralino mass, composition and annihilation cross-section. For the case of a dwarf galaxy, like e.g. Draco, the constraints on the DM annihilation cr...

Colafrancesco, Sergio; Marchegiani, Paolo; Beck, Geoff; Beck, Rainer; Zechlin, Hannes; Lobanov, Andrei; Horns, Dieter

2015-01-01T23:59:59.000Z

470

Gamma-ray probes of dark matter substructure  

SciTech Connect (OSTI)

The substructure content of dark matter halos is interesting because it can be affected by complex galaxy physics and dark matter particle physics. However, observing the small scale structure of dark matter is a challenge. The subhalo abundance (mass function, minimum mass) and morphology (density profile, subhalo shape, subsubstructure) contain information about complex astrophysics (halo formation processes) and new exotic fundamental physics (dark matter interactions). Indirect detection of dark matter annihilation radiation (DMAR) in gamma rays may be the most direct method for observing small scale structure. I outline the ways in which gamma rays may probe halo substructure. If substructure is bountiful, it may be responsible for the eventual discovery of DMAR, for instance in galaxy clusters or the diffuse gamma-ray background. Otherwise, the observation of DMAR in places without much substructure, such as the Galactic center, would lead to strict limits on the properties of small scale structure. Properties of the gamma-ray angular power spectrum will also provide information or constraints on Milky Way halo substructure.

Campbell, Sheldon [Department of Physics and Center for Cosmology and AstroParticle Physics (CCAPP), The Ohio State University, 191 W. Woodruff Ave., Columbus, OH 43210 (United States)

2014-06-24T23:59:59.000Z

471

Probing the antisymmetric Fano interference assisted by a Majorana fermion  

SciTech Connect (OSTI)

As the Fano effect is an interference phenomenon where tunneling paths compete for the electronic transport, it becomes a probe to catch fingerprints of Majorana fermions lying on condensed matter systems. In this work, we benefit of this mechanism by proposing as a route for that an Aharonov-Bohm-like interferometer composed by two quantum dots, being one of them coupled to a Majorana bound state, which is attached to one of the edges of a semi-infinite Kitaev wire within the topological phase. By changing the Fermi energy of the leads and the symmetric detuning of the levels for the dots, we show that opposing Fano regimes result in a transmittance characterized by distinct conducting and insulating regions, which are fingerprints of an isolated Majorana quasiparticle. Furthermore, we show that the maximum fluctuation of the transmittance as a function of the detuning is half for a semi-infinite wire, while it corresponds to the unity for a finite system. The setup proposed here constitutes an alternative experimental tool to detect Majorana excitations.

Dessotti, F. A.; Ricco, L. S. [Departamento de Física e Química, Unesp - Univ Estadual Paulista, 15385-000 Ilha Solteira, São Paulo (Brazil); Souza, M. de [Departamento de Física, IGCE, Unesp - Univ Estadual Paulista, 13506-900 Rio Claro, São Paulo (Brazil); Souza, F. M. [Instituto de Física, Universidade Federal de Uberlândia, 38400-902 Uberlândia, Minas Gerais (Brazil); Seridonio, A. C. [Departamento de Física e Química, Unesp - Univ Estadual Paulista, 15385-000 Ilha Solteira, São Paulo (Brazil); Departamento de Física, IGCE, Unesp - Univ Estadual Paulista, 13506-900 Rio Claro, São Paulo (Brazil)

2014-11-07T23:59:59.000Z

472

GRB Probes of the High-z Universe with EXIST  

E-Print Network [OSTI]

The Energetic X-ray Imaging Survey Telescope (EXIST) mission concept is optimized for study of high-z GRBs as probes of the early Universe. With a High Energy Telescope (HET) incorporating a 4.5m^2 5-600keV (CZT; 0.6mm pixels) detector plane for coded aperture imaging a 90deg x 70deg (>10% coding fraction) field of view with 2' resolution and 5 sigma sources, EXIST will perform rapid (7, EXIST will open a new era in studies of the early Universe as well as carry o ut a rich program of AGN and transient-source science. An overview of the GRB science objectives and a brief discussion of the overall mission design and operations is given, and example high-z GRB IRT spectra are shown. EXIST is being proposed to the Astro2010 Decadal Survey as a 5 year Medium Class mission that could be launched as early as 2017.

Grindlay, Jonathan

2009-01-01T23:59:59.000Z

473

Probing stellar accretion with mid-infrared hydrogen lines  

E-Print Network [OSTI]

In this paper we investigate the origin of the mid-infrared (IR) hydrogen recombination lines for a sample of 114 disks in different evolutionary stages (full, transitional and debris disks) collected from the {\\it Spitzer} archive. We focus on the two brighter {H~{\\sc i}} lines observed in the {\\it Spitzer} spectra, the {H~{\\sc i}}(7-6) at 12.37$\\mu$m and the {H~{\\sc i}}(9-7) at 11.32$\\mu$m. We detect the {H~{\\sc i}}(7-6) line in 46 objects, and the {H~{\\sc i}}(9-7) in 11. We compare these lines with the other most common gas line detected in {\\it Spitzer} spectra, the {[Ne~{\\sc iii}]} at 12.81$\\mu$m. We argue that it is unlikely that the {H~{\\sc i}} emission originates from the photoevaporating upper surface layers of the disk, as has been found for the {[Ne~{\\sc iii}]} lines toward low-accreting stars. Using the {H~{\\sc i}}(9-7)/{H~{\\sc i}}(7-6) line ratios we find these gas lines are likely probing gas with hydrogen column densities of 10$^{10}$-10$^{11}$~cm$^{-3}$. The subsample of objects surrounded by ...

Rigliaco, Elisabetta; Duchene, G; Edwards, S; Ardila, D R; Grady, C; Mendigutía, I; Montesinos, B; Mulders, G D; Najita, J R; Carpenter, J; Furlan, E; Gorti, U; Meijerink, R; Meyer, M R

2015-01-01T23:59:59.000Z

474

UID-GaN doping1016 cm-3 2 m 5 m2 m  

E-Print Network [OSTI]

, a physically-based TCAD simulation tool from Silvaco is used. Physical models used in the simulation include

Paris-Sud XI, Université de

475

Results of experimental tests and calibrations of the surface neutron moisture measurement probe  

SciTech Connect (OSTI)

The surface neutron moisture probe has been tested both to demonstrate that is is able to operate in the expected in-tank temperature and gamma-ray fields and to provide detector responses to known moisture concentration materials. The probe will properly function in a simultaneous high temperature (80 degrees C) and high gamma radiation field (210 rad/hr)environment. Comparisons between computer model predicted and experimentally measured detector responses to changes in moisture provide a basis for the probe calibration to in-tank moisture concentrations.

Watson, W.T.; Bussell, J.H., Westinghouse Hanford

1996-08-13T23:59:59.000Z

476

Few-cycle optical probe-pulse for investigation of relativistic laser-plasma interactions  

SciTech Connect (OSTI)

The development of a few-cycle optical probe-pulse for the investigation of laser-plasma interactions driven by a Ti:sapphire, 30 Terawatt (TW) laser system is described. The probe is seeded by a fraction of the driving laser's energy and is spectrally broadened via self-phase modulation in a hollow core fiber filled with a rare gas, then temporally compressed to a few optical cycles via chirped mirrors. Shadowgrams of the laser-driven plasma wave created in relativistic electron acceleration experiments are presented with few-fs temporal resolution, which is shown to be independent of post-interaction spectral filtering of the probe-beam.

Schwab, M. B.; Sävert, A.; Polz, J.; Schnell, M.; Rinck, T.; Möller, M.; Hansinger, P. [Insitut für Optik und Quantenelektronik, Max-Wien-Platz 1, 07743 Jena (Germany)] [Insitut für Optik und Quantenelektronik, Max-Wien-Platz 1, 07743 Jena (Germany); Jäckel, O.; Paulus, G. G.; Kaluza, M. C. [Insitut für Optik und Quantenelektronik, Max-Wien-Platz 1, 07743 Jena (Germany) [Insitut für Optik und Quantenelektronik, Max-Wien-Platz 1, 07743 Jena (Germany); Helmholtz-Institut Jena, Fröbelstieg 3, 07743 Jena (Germany); Veisz, L. [Max-Planck-Institut für Quantenoptik, Hans-Kopfermann-Straße 1, 85748 Garching (Germany)] [Max-Planck-Institut für Quantenoptik, Hans-Kopfermann-Straße 1, 85748 Garching (Germany)

2013-11-04T23:59:59.000Z

477

Sagnac interferometry as a probe to the commutation relation of a macroscopic quantum mirror  

SciTech Connect (OSTI)

Single photon Sagnac interferometry as a probe to macroscopic quantum mechanics is considered at the theoretical level. For a freely moving macroscopic quantum mirror susceptible to radiation pressure force inside a Sagnac interferometer, a careful analysis of the input-output relation reveals that the particle spectrum readout at the bright and dark ports encode information concerning the noncommutativity of position and momentum of the macroscopic mirror. A feasible experimental scheme to probe the commutation relation of a macroscopic quantum mirror is outlined to explore the possible frontier between classical and quantum regimes. In the Appendix, the case of Michelson interferometry as a feasible probe is also sketched.

Yang Ran; Gong Xuefei; Pei Shouyong; Luo Ziren; Lau, Y. K. [Physics Department, Huazhong University of Science and Technology, Wuhan 430074 (China); Institute of High Energy Physics, Theoretical Physics Center for Science Facilities, Chinese Academy of Sciences, Beijing 100049 (China); Physics Department, Beijing Normal University, Beijing 100875 (China); Institute of Mechanics, Chinese Academy of Sciences, 15, Beisihuanxi road, Beijing 100190 (China); Institute of Applied Mathematics, Academy of Mathematics and System Science, Chinese Academy of Sciences, 55, Zhongguancun Donglu, Beijing 100190 (China)

2010-09-15T23:59:59.000Z

478

Marine Natural Products: Synthesis, Niche Environments, and Chemical Probes  

E-Print Network [OSTI]

Staphylococcus aureus (MRSA, MIC = 11.5 ?M) and vancomycin-Gram-negative pathogens, MRSA (MIC = 4.7 ?M), vancomycin-potent activity against MRSA (MIC 90 = 0.61 ?M, compared

Sanchez, Laura Margaret

2012-01-01T23:59:59.000Z

479

Towards Situational Awareness of Large-scale Botnet Probing Events  

E-Print Network [OSTI]

, Site security mon- itoring, Botnet, Global property extrapolation, Honeynet, Scan strategy inference peculiar spikes in seemingly benign activity--often what the site's security staff most wants to know

Chen, Yan

480

IEEE Trans Ultrason Ferroelectr Freq Control . Author manuscript Combined passive detection and ultrafast active imaging of cavitation  

E-Print Network [OSTI]

Gateaué ô Abstract The activation of natural gas nuclei to induce larger and ultrafast active imaging over a large volume and with the same multi-element probe. Bubble nucleation ; ultrasonography ; Phantoms, Imaging ; Sheep ; Signal Processing, Computer-Assisted ; Transducers ; Ultrasonography

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "2-m probe activity" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Probing Interactions at the Nanoscale: Sensing Protein Molecules  

SciTech Connect (OSTI)

Introduction We have developed a high-frequency electronic biosensor of parallel-plate geometry that is embedded within a microfluidic device. This novel biosensor allows us to perform dielectric spectroscopy on a variety of biological samples—from cells to molecules—in solution. Because it is purely electronic, the sensor allows for rapid characterization with no sample preparation or chemical alteration. In addition, it is capable of probing length scales from millimeters to microns over a frequency range 50 MHz to 40 GHz, and sample volumes as small as picoliters [1,2]. Our high-frequency biosensor has evolved from previous device designs based on a coplanar waveguide (CPW) geometry [2]. For our current device, we employ microfluidic tectonics (µFT) [3] to embed two microstrip conductors within a microfluidic channel. The electronic coupling between the two conductors is greater than in our previous CPW design and more importantly, leads to an enhanced sensitivity. Our utilization of µFT allows us to incorporate easily this high-frequency electronic biosensor with a variety of lab-on-a-chip architectures. Device Description Figure 1 is a schematic of our high-frequency electronic biosensor. We fabricate this sensor by first depositing a 500 Å seed layer of gold onto two glass microscope slides. We then use photolithography to pattern the gold that is subsequently electroplated to a thickness of 4-6 µm. After reactive-ion etching the photoresist and removing the unplated gold with a standard iodine-based gold etchant, we align the two slides under a microscope such that the microstrip conductors overlap one another in a parallel-plate geometry (80 µm x 500 µm). We control the separation between the microstrip conductors using gold foil spacers 3–25 µm thick. The foil additionally ensures coupling between the grounds on each slide. Following alignment, we employ µFT to bond the two glass slides together and to create a microfluidic channel running perpendicular to the microstrip conductors (see Figure 1). We complete the device by inserting 0.02” ID vinyl tubing through predrilled input and output holes of the device [3]. All of our devices are designed to have a 50 ? matched impedance and minimal insertion loss for 0.05 – 40 GHz. With these characteristics, we expect a sensitivity of 0.05 dB. Results By accessing frequencies > 20 GHz with our device, we can probe unique low-frequency vibrational or rotational modes of bio-macromolecules, since at these frequencies the counterions have fully relaxed, the dipole moment of water is rapidly decreasing, and the macroscopic distortions of macromolecules become important and are reflected in the obtained spectra. As a first demonstration, we have measured PCR products. We are able to distinguish between non-reacted primers for PCR amplification and reacted PCR products (24 amplification cycles). Figure 2 shows representative spectra of the two different DNA solutions obtained from a single device and scaled to DI water. We have obtained similar spectral features from additional devices and are currently developing a quantitative model to explain our results. This initial demonstration of molecular differentiation using a high-frequency electronic biosensor shows the great promise of electronic biosensing.

Sohn, Lydia; Weiss, Ron; Tavazoie, Saeed

2003-09-15T23:59:59.000Z

482

Probing Liquid Surfaces under Vacuum Using SEM and TOF-SIMS....  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

beneath it. This window supports the liquid against the vacuum by the liquid’s surface tension, while limiting the high-density vapor region traversed by the probe beams...

483

Probing the Majorana nature of the neutrino with neutrinoless double beta decay  

E-Print Network [OSTI]

Neutrinoless double beta decay (NDBD) is the only experiment that could probe the Majorana nature of the neutrino. Here we study the theoretical implications of NDBD for models yielding tri-bimaximal lepton mixing like A4 and S4.

S. Morisi

2009-10-14T23:59:59.000Z

484

Field comparison of the point velocity probe with other groundwater velocity measurement methods  

E-Print Network [OSTI]

Field testing of a new tool for measuring groundwater velocities at the centimeter scale, the point velocity probe (PVP), was undertaken at Canadian Forces Base, Borden, Ontario, Canada. The measurements were performed in ...

Labaky, W.; Devlin, J. F.; Gillham, R. W.

2009-03-14T23:59:59.000Z

485

Methods of staining target chromosomal DNA employing high complexity nucleic acid probes  

DOE Patents [OSTI]

Methods and compositions for staining based upon nucleic acid sequence that employ nucleic acid probes are provided. Said methods produce staining patterns that can be tailored for specific cytogenetic analyses. Said probes are appropriate for in situ hybridization and stain both interphase and metaphase chromosomal material with reliable signals. The nucleic acid probes are typically of a complexity greater than 50 kb, the complexity depending upon the cytogenetic application. Methods and reagents are provided for the detection of genetic rearrangements. Probes and test kits are provided for use in detecting genetic rearrangements, particularly for use in tumor cytogenetics, in the detection of disease related loci, specifically cancer, such as chronic myelogenous leukemia (CML), retinoblastoma, ovarian and uterine cancers, and for biological dosimetry. Methods and reagents are described for cytogenetic research, for the differentiation of cytogenetically similar but genetically different diseases, and for many prognostic and diagnostic applications.

Gray, Joe W.; Pinkel, Daniel; Kallioniemi, Ol'li-Pekka; Kallioniemi, Anne; Sakamoto, Masaru

2006-10-03T23:59:59.000Z

486

Turn-on fluorescent probes for detecting nitric oxide in biology  

E-Print Network [OSTI]

Chapter 1. Investigating the Biological Roles of Nitric Oxide and Other Reactive Nitrogen Species Using Fluorescent Probes: This chapter presents an overview of recent progress in the field of reactive nitrogen species ...

McQuade, Lindsey Elizabeth, 1981-

2010-01-01T23:59:59.000Z

487

PPPL data may play role in first NASA space probe dedicated to...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

data may play role in first NASA space probe dedicated to magnetic reconnection By Raphael Rosen March 30, 2015 Tweet Widget Google Plus One Share on Facebook The Atlas V MMS...

488

Metal-based turn-on fluorescent probes for nitric oxide sensing  

E-Print Network [OSTI]

Chapter 1. Metal-Based Turn-On Fluorescent Probes for Sensing Nitric Oxide. Nitric oxide, a reactive free radical, regulates a variety of biological processes. The absence of tools to detect NO directly, rapidly, specifically ...

Lim, Mi Hee

2006-01-01T23:59:59.000Z

489

Design and thermal modeling of a non-invasive probe for measuring perfusion by thermodiffusion  

E-Print Network [OSTI]

This research 1) explores the feasibility of developing a non-invasive probe to precisely quantify microcirculatory blood flow (tissue perfusion), in real time and in absolute units, and 2) presents designs and models of ...

Charles, Steven Knight

2004-01-01T23:59:59.000Z

490

Interpretation and implementation of an ion sensitive probe as a plasma potential diagnostic  

E-Print Network [OSTI]

An ion sensitive probe (ISP) is developed as a robust diagnostic for measuring plasma potentials (?[subscript P]) in magnetized plasmas. The ISP relies on the large difference between the ion and electron gyroradii ...

Ochoukov, Roman Igorevitch

491

"USING LASERS TO CONTROL AND PROBE THE BRAIN", Prof. Adam Cohen...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

February 18, 2012, 9:30am Science On Saturday "USING LASERS TO CONTROL AND PROBE THE BRAIN", Prof. Adam Cohen, Department of Physics, Harvard University USING LASERS TO CONTROL AND...

492

Design and synthesis of probes for detection of protein-protein interaction and RNA localization  

E-Print Network [OSTI]

The use of the ketone biotin - benzophenone-biotin hydrazide system for detecting the formation of cyan fluorescent protein and NF-kappaB p50 dimers was assessed. A series of benzophenone-based probes were synthesized and ...

Ryan, Jeremy Adam

2005-01-01T23:59:59.000Z

493

Atom probe field ion microscopy and related topics: A bibliography 1991  

SciTech Connect (OSTI)

This report contains a bibliography for 1991 on the following topics: Atom probe field ion microscopy; field desorption mass spectrometry; field emission; field ion microscopy; and field emission theory.

Russell, K.F.; Miller, M.K.

1993-01-01T23:59:59.000Z

494

Femtosecond pump-probe studies of reduced graphene oxide thin films  

E-Print Network [OSTI]

The dynamics of photocarriers in reduced graphene oxide thin films is studied by using ultrafast pump-probe spectroscopy. Time dependent differential transmissions are measured with sample temperatures ranging from 9 to 300 K. At each sample...

Ruzicka, Brian Andrew; Werake, Lalani Kumari; Zhao, Hui; Wang, Shuai; Loh, Kian Ping

2010-04-01T23:59:59.000Z

495

Optical Probe for Semiconductor: Cooperative Research and Development Final Report, CRADA Number CRD-06-206  

SciTech Connect (OSTI)

This CRADA involves development of a new semiconductor characterization tool, Optical Probe, which can be commercialized by GT Solar. GT Solar will participate in the design and testing of this instrument that will be developed under an IPP project.

Sopori, B.

2011-02-01T23:59:59.000Z

496

Colloidal semiconductor nanocrystals as nanoscale emissive probes in light emitting diodes and cell biology  

E-Print Network [OSTI]

This thesis employs colloidal semiconductor nanocrystals (NCs) as nanoscale emissive probes to investigate the physics of light emitting diodes (LEDs), as well as to unveil properties of cells that conventional imaging ...

Huang, Hao, Ph. D. Massachusetts Institute of Technology

2008-01-01T23:59:59.000Z

497

Kelvin Probe Force Microscopy for in situ Electrical Characterization of Organic Solar Cells  

E-Print Network [OSTI]

Kelvin Probe Force Microscopy for in situ Electrical Characterization of Organic Solar Cells., University of Pittsburgh The most efficient organic solar cell today is made from blending conjugated donors and acceptors in bulk heterojunction organic solar cells. Most microscopic characterization

Fisher, Frank

498

Construction and operation of a Mirror Langmuir Probe diagnostic for the Alcator C-Mod tokamak  

E-Print Network [OSTI]

Langmuir probe diagnostic systems presently employed on Alcator C-Mod and elsewhere generally suffer from a severe limitation: unless multiple electrode or high-frequency bias techniques are employed, these systems can not ...

Lyons, Laurence Anthony

2007-01-01T23:59:59.000Z

499

Using a surface-sensitive chemical probe and a bulk structure...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

probe and a bulk structure technique to monitor the ?- to ?-Al2O3 phase Abstract: In this work, we investigated the phase transformation of ? Al2O3 to...

500

Probing Electron Transfer Dynamics at MgO Surfaces by Mg-Atom...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Electron Transfer Dynamics at MgO Surfaces by Mg-Atom Desorption. Probing Electron Transfer Dynamics at MgO Surfaces by Mg-Atom Desorption. Abstract: Desorption of a weakly bound...