Powered by Deep Web Technologies
Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Orthopaedic La erre (EBE)  

E-Print Network [OSTI]

Science South Hall Physics Townsend North Hall Eckles General Services Building Connaway Academic Support Ctr ROSS ST MONKDR HOSPITAL DR STADIUM BLVD Campus Facilities University of Missouri 2014 Major Summer 16 1 2 5 17 11 9 12 18 10 24 6 7 13 8 14 3 22 23 Legend 1. April 8�July 31, 2015 One-way traffic only

Missouri-Columbia, University of

2

DOE-STD-1150-2013 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

13 DOE-STD-1150-2013 December 2, 2013 Quality Assurance Functional Area Qualification Standard The Quality Assurance (QA) Functional Area Qualification Standard (FAQS) establishes...

3

DOE-STD-3007-93 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

93 93 DOE-STD-3007-93 September 17, 1998 Guidelines for Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities Replaced by DOE-STD-3007-2007 | CHANGE NOTICE NO. 1 (September 1998) Contained in this document are guidelines that should be followed when preparing Criticality Safety Evaluations that will be used to demonstrate the safety of operations performed at Department of Energy (DOE) Non-Reactor Nuclear Facilities. DOE-STD-3007-93, Guidelines for Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities; Replaced by DOE-STD-3007-2007 More Documents & Publications DOE-STD-1134-99 DOE-STD-1135-99 Technical Standards, DOE Orders and Applicable CFRs/DEAR Crosswalk - February 2, 2002

4

DoD 5015.02-STD  

Broader source: Energy.gov (indexed) [DOE]

DoD 5015.02-STD DoD 5015.02-STD ELECTRONIC RECORDS MANAGEMENT SOFTWARE APPLICATIONS DESIGN CRITERIA STANDARD April 25, 2007 ASSISTANT SECRETARY OF DEFENSE FOR NETWORKS AND INFORMATION INTEGRATION/ DEPARTMENT OF DEFENSE CHIEF INFORMATION OFFICER DoD 5015.02-STD, April 25, 2007 1 FOREWORD FOREWORD This Standard is reissued under the authority of DoD Directive 5015.2, "Department of Defense Records Management Program," March 6, 2000, (Reference (a)) which provides implementing and procedural guidance on the management of records in the Department of Defense. It sets forth mandatory baseline functional requirements for Records Management Application (RMA) software used by the DoD Components in implementing their records management programs;

5

DOE-STD-1027-92 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-1027-92 DOE-STD-1027-92 DOE-STD-1027-92 December 12, 1997 Hazard Categorization and Accident Analysis Techniques for Compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports Change Notice No. 1 (September 1997) The purpose of this DOE Standard is to establish guidance for the preparation and review of hazard categorization and accident analyses techniques as required in DOE Order 5480.23, Nuclear Safety Analysis Reports. DOE-STD-1027-92, Hazard Categorization and Accident Analysis Techniques For Compliance With DOE Order 5480.23, Nuclear Safety Analysis Reports More Documents & Publications NSTP 2002-2 Methodology for Final Hazard Categorization for Nuclear Facilities from Category 3 to Radiological (11/13/02). DOE-EM-STD-5502-94 INTERPRETATION REGARDING THE APPLICATION OF DOE TECHNICAL STANDARD 1027-92,

6

DOE-DP-STD-3016-99 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

DP-STD-3016-99 DP-STD-3016-99 DOE-DP-STD-3016-99 February 26, 1999 DOE-DP-STD-3016-99: Limited Standard; Hazard Analysis Reports for Nuclear Explosive Operations Replaced by DOE-NA-3016-2006 This technical standard applies to the conduct of hazard analyses and preparation of hazard analysis reports (HARs) for nuclear explosive operations (NEOs) conducted by the Department of Energy (DOE). This standard addresses operation-specific HARs and their interface with facility safety basis documents (Safety Analysis Reports [SARs] or other DOE-approved safety basis documents). DOE-DP-STD-3016-99, Limited Standard; Hazard Analysis Reports for Nuclear Explosive Operations More Documents & Publications Technical Standards, DOE Orders and Applicable CFRs/DEAR Crosswalk - February 2, 2002

7

DOE-STD-1128-98  

Broader source: Energy.gov [DOE]

Guide of Good Practices for Occupational Radiological Protection in Plutonium Facilities Replaced by DOE-STD-1128-2008 | Reaffirmation with Errata (May 2003) | Change Notice 2 (December 2006) This Technical Standard (TS) does not contain any new requirements. Its purpose is to provide guides to good practice, update existing reference material, and discuss practical lessons learned relevant to the safe handling of plutonium.

8

DOE-EM-STD-5502-94 | Department of Energy  

Office of Environmental Management (EM)

2-94 DOE-EM-STD-5502-94 December 04, 1995 Hazard Baseline Documentation Canceled, Effective October 2001, due to FY 2001 Sunset Review This standard establishes uniform Office of...

9

DOE-STD-3022-98 | Department of Energy  

Office of Environmental Management (EM)

2-98 DOE-STD-3022-98 May 19, 1998 DOE HEPA Filter Test Program Cancelled | Superseding DOE NE F 3-42 (January 1987) This standard establishes essential elements of a Department of...

10

DOE-STD-1120-2005 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

0-2005 0-2005 DOE-STD-1120-2005 April 13, 2005 Integration of Environment, Safety, and Health into Facility Disposition Activities Subsequent to the initial release of DOE-STD-1120-98, nuclear safety basis requirements were promulgated in 10 CFR 830, Subpart B. The standard was identified as a "safe harbor" approach for preparing a documented safety analysis (DSA) for decommissioning and environmental restoration activities. The May 1998 version of the standard was not explicit regarding compliance with safety basis requirements of Part 830. DOE-STD-1120-2005, Integration of Environment, Safety, and Health into Facility Disposition Activities, Volume 1 of 2 DOE-STD-1120-2005, Integration of Environment, Safety, and Health into Facility Disposition Activities, Volume 2 of 2

11

DOE-STD-1197-2011 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

7-2011 7-2011 DOE-STD-1197-2011 October 17, 2011 Occurrence Reporting Causal Analysis The purpose of causal analysis is to identify and understand the causes (both individual and organizational) that contributed to an occurrence in order to correct deficiencies. DOE O 232.2, Occurrence Reporting and Processing of Operations Information, requires the investigation and analysis of occurrences. Pursuant to DOE O 232.2, causal analyses of occurrences and near misses must go beneath the surface to identify how the underlying sources of operational vulnerability combined to produce unintended or undesired results. DOE-STD-1197-2011, Occurrence Reporting Causal Analysis More Documents & Publications All Active DOE Technical Standards Document DOE-STD-1194-2011 DOE-STD-1150-2013

12

DOE-STD-1197-2011 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

197-2011 197-2011 DOE-STD-1197-2011 October 17, 2011 Occurrence Reporting Causal Analysis The purpose of causal analysis is to identify and understand the causes (both individual and organizational) that contributed to an occurrence in order to correct deficiencies. DOE O 232.2, Occurrence Reporting and Processing of Operations Information, requires the investigation and analysis of occurrences. Pursuant to DOE O 232.2, causal analyses of occurrences and near misses must go beneath the surface to identify how the underlying sources of operational vulnerability combined to produce unintended or undesired results. DOE-STD-1197-2011, Occurrence Reporting Causal Analysis More Documents & Publications DOE-STD-1194-2011 All Active DOE Technical Standards Document DOE-STD-1150-2013

13

DOE-STD-1021-93 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

1-93 1-93 DOE-STD-1021-93 April 08, 2002 Natural Phenomena Hazards Performance Categorization Guidelines for Structures, Systems, and Components Replaced by DOE-STD-1020-2012 | Change Notice No. 1 (January 1996) | Reaffirmed with Errata (April 2002) The purpose of this standard is as follows: (a) To provide, for the purpose of Natural Phenomena Hazard (NPH) design and evaluation, criteria for selecting performance categories (PCs) of structures, systems, and components (SSCs) in accordance with the requirements specified in DOE Order 420.1 (Reference 10) and the NPH Guide to DOE O 420.1 (DOE G 420.1-2) (Reference 11). DOE-STD-1021-93, Natural Phenomena Hazards Performance Categorization Guidelines for Structures, Systems, and Components, Replaced by DOE-STD-1020-2012

14

DOE Order Self Study Modules - DOE STD 1063, Facility Representatives  

Broader source: Energy.gov (indexed) [DOE]

63-2011 63-2011 FACILITY REPRESENTATIVES DOE-STD-1063-2011 Familiar Level August 2011 1 DOE-STD-1063-2011 FACILITY REPRESENTATIVES FAMILIAR LEVEL OBJECTIVES Given the familiar level of this module and the resources listed below, you will be able to answer the following questions: 1. What are the purpose and scope of DOE-STD-1063-2011? 2. What are the definitions of the terms listed in section 3 of DOE-STD-1063-2011? 3. What are the duties, responsibilities, and authorities of facility representatives (FRs) and other key personnel? 4. What are the requirements of the FR program? 5. What are the Department of Energy (DOE)-wide FR performance indicators (PIs)? 6. How are DOE-wide FR PIs calculated? 7. What are the FR program objectives that should be measured by an FR program

15

DOE-STD-1107-97 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

7-97 7-97 DOE-STD-1107-97 November 08,2007 DOE-STD-1107-97: Knowledge, Skills, and Abilities for Key Radiation Protection Positions at DOE Facilities Change Notice No. 1 (November 2007) This document provides detailed qualification criteria for contractor key radiation protection personnel. Although federal key radiation protection positions are also identified in Table 1, qualification standards for federal positions are provided in DOE O 360.1B, October 2001 and the DOE Technical Qualifications Program. DOE-STD-1107-97: Knowledge, Skills, and Abilities for Key Radiation Protection Positions at DOE Facilities More Documents & Publications DOE-STD-1107-97 Technical Standards, DOE Orders and Applicable CFRs/DEAR Crosswalk - February 2, 2002 Technical Standards,DOE Standards and Corresponding Directives Crosswalk -

16

DOE-STD-1104-2014  

Broader source: Energy.gov [DOE]

Review and Approval of Nuclear Facility Safety Basis and Safety Design Basis Documents. This Standard describes a framework and the criteria to be used for approval of (1) safety basis documents, as required by 10 Code of Federal Regulation (C.F.R.) 830, Nuclear Safety Management, and (2) safety design basis documents, as required by Department of Energy (DOE) Standard (STD)-1189-2008, Integration of Safety into the Design Process.

17

DOE-STD-1022-94  

Broader source: Energy.gov [DOE]

Natural Phenomena Hazards Characterization Criteria Replaced by DOE-STD-1020-2012 | Change Notice No. 1 (January 1996) | Reaffirmed with Errata (April 2002) The Department of Energy (DOE) has established policy and requirements for natural phenomena hazard (NPH) mitigation for DOE sites and facilities using a graded approach as specified by DOE O 420.1, “Facility Safety” and associated NPH Guide G 420.1-2.

18

DOE-STD-3009-2014  

Broader source: Energy.gov [DOE]

Preparation Of Nonreactor Nuclear Facility Documented Safety Analysis This Department of Energy (DOE) Standard (STD), DOE-STD-3009-2014, describes a method for preparing a Documented Safety Analysis (DSA) that is acceptable to DOE for nonreactor nuclear facilities.

19

DOE-STD-3009-94  

Broader source: Energy.gov [DOE]

Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses CHANGE NOTICE NO.1 (January 2000) | CHANGE NOTICE NO. 2 (April 2002) | CHANGE NOTICE NO. 3 (March 2006) | Replaced by DOE-STD-3009-2014 (November 2014) This Standard describes a DSA preparation method that is acceptable to the DOE as delineated for those specific facilities listed in Table 2 of Appendix A, “General Statement of Safety Basis Policy”, to Subpart B, “Safety Basis Requirements”, of 10 CFR 830. It was developed to assist Hazard Category 2 and 3 facilities in preparing SARs that will satisfy the requirements of 10 CFR 830.

20

DOE-STD-3009-94 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

09-94 09-94 DOE-STD-3009-94 May 30, 2005 Preparation Guide for U. S. Department of Energy Nonreactor Nuclear Facility Documented Safety Analysis CHANGE NOTICE NO. 1 (January 2000) | CHANGE NOTICE NO. 2 (April 2002) This Standard describes a DSA preparation method that is acceptable to the DOE as delineated for those specific facilities listed in Table 2 of Appendix A, "General Statement of Safety Basis Policy", to Subpart B, "Safety Basis Requirements", of 10 CFR 830. It was developed to assist Hazard Category 2 and 3 facilities. in preparing SARs that will satisfy the requirements of 10 CFR 830. DOE STD-3009-94, Preparation Guide for U. S. Department of Energy Nonreactor Nuclear Facility Documented Safety Analysis DOE STD-3009-94, Preparation Guide for U. S. Department of Energy

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

DOE-STD-1021-93  

Broader source: Energy.gov [DOE]

Natural Phenomena Hazards Performance Categorization Guidelines for Structures, Systems, and Components Replaced by DOE-STD-1020-2012 | Change Notice No. 1 (January 1996) | Reaffirmed with Errata (April 2002) The purpose of this standard is as follows: (a) To provide, for the purpose of Natural Phenomena Hazard (NPH) design and evaluation, criteria for selecting performance categories (PCs) of structures, systems, and components (SSCs) in accordance with the requirements specified in DOE Order 420.1 (Reference 10) and the NPH Guide to DOE O 420.1 (DOE G 420.1-2) (Reference 11).

22

DOE-STD-1172-2003 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

2-2003 2-2003 DOE-STD-1172-2003 December 19, 2003 Safety Software Quality Assurance Functional Area Qualification Standard Replaced by DOE-STD-1172-2011 The Safety Software Quality Assurance Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of safety software that includes, but is not limited to safety software used for consequence analysis for potential accidents and design basis events, design for structures, systems and components, instrumentation and controls (I&C), and also other types of software, such as databases used for safety management functions. DOE-STD-1172-2003, Safety Software Quality Assurance Functional Area

23

DOE-STD-1041-93 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

1-93 1-93 DOE-STD-1041-93 January 11, 1999 Guide to Good Practices for Shift Routines and Operating Practices Change Notice No. 1 (December 1998) | Reaffirmed 2001 This Guide to Good Practices is written to enhance understanding of, and provide direction for, "Shift Routines and Operating Practices," Chapter II of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. "Shift Routines and Operating Practices" is an element of an effective Conduct of Operations program. DOE-STD-1041-93, Guide to Good Practices for Shift Routines and Operating Practices More Documents & Publications Order Module--DOE Order 422.1, CONDUCT OF OPERATIONS OPS 9.2 Shift Routines and Operating Practices 8/24/98 DOE-STD-1038-93

24

DOE-STD-1041-93 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

1-93 1-93 DOE-STD-1041-93 January 11, 1999 Guide to Good Practices for Shift Routines and Operating Practices Change Notice No. 1 (December 1998) | Reaffirmed 2001 This Guide to Good Practices is written to enhance understanding of, and provide direction for, "Shift Routines and Operating Practices," Chapter II of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. "Shift Routines and Operating Practices" is an element of an effective Conduct of Operations program. DOE-STD-1041-93, Guide to Good Practices for Shift Routines and Operating Practices More Documents & Publications OPS 9.2 Shift Routines and Operating Practices 8/24/98 Order Module--DOE Order 422.1, CONDUCT OF OPERATIONS DOE-STD-1038-93

25

DOE-STD-1063-2000 - Facility Representatives  

Broader source: Energy.gov (indexed) [DOE]

NOT MEASUREMENT NOT MEASUREMENT SENSITIVE DOE-STD-1063-2000 March 2000 Superseding DOE-STD-1063-97 October 1997 DOE STANDARD FACILITY REPRESENTATIVES U.S. Department of Energy AREA MGMT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. TS This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1063-2000 iii FOREWORD 1. This Department of Energy standard is approved for use by all DOE Components. 2. The Revision to this DOE standard was developed by a working group consisting of

26

DOE Order Self Study Modules - DOE STD 1098-2008, Radiological Control  

Broader source: Energy.gov (indexed) [DOE]

STD-1098-2008 STD-1098-2008 DOE STANDARD: RADIOLOGICAL CONTROL DOE-STD-1098-2008 Familiar Level August 2011 1 DOE-STD-1098-2008 RADIOLOGICAL CONTROL FAMILIAR LEVEL OBJECTIVES Given the familiar level of this module and the resources listed below, you will be able to answer the following questions: 1. What is the purpose of DOE-STD-1098-2008? 2. To which DOE position is the authority and responsibility to establish a comprehensive and effective radiological control training program assigned? 3. What is the definition of the term -total effective dose?‖ 4. What is the definition of the term -lifetime control level?‖ 5. What are three trigger levels that require a formal radiological review of work activities?

27

DOE-STD-1194-2011  

Broader source: Energy.gov [DOE]

Nuclear Materials Control and Accountability Replaced by DOE-STD-1194-2011 Replaced by DOE-STD-1194-2011 | CHANGE NOTICE No.1 (AUGUST 2011) This document describes establishing and maintaining a Material Control and Accountability (MC&A) program, where each MC&A program element is a part of a quality MC&A program.

28

DOE-STD-1077-94  

Broader source: Energy.gov [DOE]

Training Accreditation Program Standard: Requirements and Guidelines Canceled | Supercedes DOE-STD-0101T, TAP-1, and DOE-STD-0103T, TAP-3 The purpose of this Standard is to provide requirements, information, and guidance for the effective implementation of the DOE Training Accreditation Program established by DOE Order 5480.18B, “Nuclear Facility Training Accreditation Program.”

29

DOE-STD-1136-2000  

Broader source: Energy.gov [DOE]

Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities Change Notice 1 (October 2001) | Change Notice 2 (March 2001) | Change Notice 3 (December 2001) This Technical Standard (TS) provides operational guidance, practical lessons learned and experience gained, guides to good practice, and reference information on the safe handling of uranium. The TS provides information to assist uranium facilities in complying with Title 10 of the Code of Federal Regulations (CFR), Part 835, Occupational Radiation Protection (10 CFR 835) (DOE 1998a). This TS supplements the DOE G 441.1 series of Guides, DOE Orders, and DOE-STD-1098-99, Radiological Control (RCS) (DOE 1999a) and has as its sole purpose the protection of workers and the public from the hazards that are inherent in uranium storage, processing, and handling.

30

DOE-STD-1095-95  

Broader source: Energy.gov [DOE]

Department of Energy Laboratory Accreditation Program for Personnel Dosimetry Systems Replaced by DOE-STD-1095-2011 This standard establishes the method for obtaining accreditation of personnel dosimetry systems by the Department of Energy Laboratory Accreditation Program.

31

DOE-STD-1066-99  

Broader source: Energy.gov [DOE]

Fire Protection Design Criteria Replaced by DOE-STD-1066-2012 | Superseding DOE-STD-1066-97 This Standard provides supplemental fire protection guidance applicable to the design and construction of DOE facilities and site features (such as water distribution systems) that are also provided for fire protection. It is intended to be used in conjunction with the applicable building code, National Fire Protection Association (NFPA) Codes and Standards, and any other applicable DOE construction criteria

32

DOE-STD-3013-2000  

Broader source: Energy.gov [DOE]

Stabilization, Packaging, and Storage of Plutonium-Bearing Materials Replaced by DOE-STD-3013-2004 | Superseding DOE-STD-3013-99 (November 1999) This Standard provides criteria for stabilization of plutonium-bearing materials at DOE facilities to safe and stable forms that can be packaged and placed in storage with minimal surveillance for up to 50 years. This Standard applies to plutonium-bearing metals and oxides containing at least 30 wt% plutonium plus uranium.

33

DOE-STD-3013-2004  

Broader source: Energy.gov [DOE]

Stabilization, Packaging, and Storage of Plutonium-Bearing Materials Replaced by DOE-STD-3013-2012 | Superseding DOE-STD-3013-2000 (September 2000) This Standard provides criteria for stabilization of plutonium-bearing materials at DOE facilities to safe and stable forms that can be packaged and placed in storage with minimal surveillance for up to 50 years. This Standard applies to plutonium-bearing metals and oxides containing at least 30 wt% plutonium plus uranium.

34

DOE-STD-3006-2000  

Broader source: Energy.gov [DOE]

Planning and Conduct of Operational Readiness Reviews Replaced by DOE-STD-3006-2010 | Superseding DOE-STD-3006-95 (November 1995) DOE O 425.1B specifies the conditions and circumstances when an Operational Readiness Review (ORR) or a Readiness Assessment (RA) is required as part of a new start or restart process. This standard provides guidance on the planning and conduct of the ORRs and RAs

35

DOE-STD-1020-2002  

Broader source: Energy.gov [DOE]

Natural Phenomena Hazards Design and Evaluation Criteria for Department of Energy Facilities Replaced by DOE-STD-1020-2012 | Superseding DOE-STD-1020-94 (April 1994) It is the policy of the Department of Energy (DOE) to design, construct, and operate DOE facilities so that workers, the general public, and the environment are protected from the impacts of natural phenomena hazards on DOE facilities.

36

Shall Statements in DOE-STD-1063-2006  

Broader source: Energy.gov (indexed) [DOE]

"Shall" Statements in DOE-STD-1063-2006 "Shall" Statements in DOE-STD-1063-2006 Standard Sect. Respon. Party Shall Statement Action New? Revised? Section from 1063-2000 4.1.1 FEMs Shall Field Element Managers shall ensure that operating contractors apprise Facility Representatives of planning, scheduling, maintenance, operations review, and safety review meetings. 5.2b 4.1.1 FRs Shall A Facility Representative shall be thoroughly familiar with site and facility characteristics, operating procedures, facility authorization bases, operating organizational structure, and key process control personnel. 5.2b 4.1.1 FRs Shall The Facility Representative shall be aware of major work in progress and in planning. 5.2b 4.1.1 FRs Shall The Facility Representative shall know which personnel are controlling the work, what procedures are to be

37

DOE-STD-3009-94 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

9-94 9-94 DOE-STD-3009-94 March 24, 2006 Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses, Change Notice No. 3 CHANGE NOTICE NO.1 (January 2000) | CHANGE NOTICE NO. 2 (April 2002) | CHANGE NOTICE NO. 3 (March 2006) This Standard describes a DSA preparation method that is acceptable to the DOE as delineated for those specific facilities listed in Table 2 of Appendix A, "General Statement of Safety Basis Policy", to Subpart B, "Safety Basis Requirements", of 10 CFR 830. It was developed to assist Hazard Category 2 and 3 facilities in preparing SARs that will satisfy the requirements of 10 CFR 830. DOE-STD-3009-94, Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses, Change Notice No. 3

38

DOE Order Self Study Modules - DOE STD 1073-2003, Configuration Management  

Broader source: Energy.gov (indexed) [DOE]

73-2003 73-2003 CONFIGURATION MANAGEMENT DOE -STD-1073-2003 Familiar Level August 2011 1 DOE-STD-1073-2003 CONFIGURATION MANAGEMENT FAMILIAR LEVEL OBJECTIVES Given the familiar level of this module and the resources, you will be able to answer the following questions: 1. What is the purpose of DOE-STD-1073-2003? 2. What are the objectives of configuration management? 3. To what type of DOE facility does DOE-STD-1073-2003 apply? 4. What is the first set of structures, systems, and components (SSCs) that must be included in a configuration management program? 5. What is a work control process? 6. What is the objective of change control? 7. What are three elements that a technical review is designed to verify? 8. What three elements should be included in a design basis review?

39

Order Module--DOE-STD-1104-2009, REVIEW AND APPROVAL OF NUCLEAR FACILITY  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-1104-2009, REVIEW AND APPROVAL OF NUCLEAR DOE-STD-1104-2009, REVIEW AND APPROVAL OF NUCLEAR FACILITY SAFETY BASIS AND SAFETY DESIGN BASIS DOCUMENTS Order Module--DOE-STD-1104-2009, REVIEW AND APPROVAL OF NUCLEAR FACILITY SAFETY BASIS AND SAFETY DESIGN BASIS DOCUMENTS The familiar level of this module is divided into two sections that are intended to provide only an overview of the material contained in DOE-STD-1104-2009, which should be consulted for complete information. The first section covers the introduction, applicability, and chapters 1 and 2. The second section covers chapters 3, 4, and 5. We have provided examples throughout the module to help familiarize you with the material. The examples will also help prepare you for the practice at the end of this module and for the criterion test.

40

DOE-STD-1090-2007 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

7 7 DOE-STD-1090-2007 August 29, 2007 Hoisting and Rigging Standard Replaced by DOE-STD-1090-2011 The reissued June 1995 edition marked a change in classification. The DOE Office of Scientific and Technical Information (OSTI) reclassified the manual as a handbook and it was issued as DOE Hoisting and Rigging Handbook (DOE-HDBK-1090-95). After further review, OSTI has reclassified the handbook as a DOE Technical Standard and the September 1996 edition was issued as DOE STANDARD HOISTING AND RIGGING (Formerly Hoisting and Rigging Manual) DOE-STD-1090-96 (Rev-1). Additional revisions issued are DOE-STD-1090-99, DOE-STD-1090-2001, DOE-STD-1090- 2004, and DOE-STD-1090-2007. DOE-STD-1090-2007, Hoisting and Rigging Standard; Cover DOE-STD-1090-2007, Hoisting and Rigging Standard; CN Table

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

DOE-STD-1136-2000 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

0 0 DOE-STD-1136-2000 December 19, 2001 Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities Change Notice 1 (October 2001) | Change Notice 2 (March 2001) | Change Notice 3 (December 2001 This Technical Standard (TS) provides operational guidance, practical lessons learned and experience gained, guides to good practice, and reference information on the safe handling of uranium. The TS provides information to assist uranium facilities in complying with Title 10 of the Code of Federal Regulations (CFR), Part 835, Occupational Radiation Protection (10 CFR 835) (DOE 1998a). This TS supplements the DOE G 441.1 series of Guides, DOE Orders, and DOE-STD-1098-99, Radiological Control (RCS) (DOE 1999a) and has as its sole purpose the protection of workers and

42

DOE-STD-1070-94 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

June 10, 2013 June 10, 2013 Guidelines For Evaluation of Nuclear Facility Training Programs Reaffirmed June 2013 This standard initiates a framework for consistent, systematic evaluation of DOE nuclear facility training programs through the establishment and use of a uniform set of training program evaluation objectives and criteria. The performance objectives and criteria contained in the Appendix to this standard shall be used by DOE Headquarters and field organizations for the evaluation of nuclear facility training and qualification programs. DOE-STD-1070-94, Guidelines For Evaluation of Nuclear Facility Training Programs More Documents & Publications DOE-STD-1070-94 Technical Standards, DOE Orders and Applicable CFRs/DEAR Crosswalk - February 2, 2002 DOE-HDBK-1001-96

43

DOE-STD-1020-2012  

Broader source: Energy.gov [DOE]

Natural Phenomena Hazards Analysis and Design Criteria for Department of Energy Facilities Supersedes DOE-STD-1020-2002 This Department of Energy (DOE) Standard (STD)-1020-2012, Natural Phenomena Hazards Analysis and Design Criteria for DOE Facilities, provides criteria and guidance for the analysis and design of facility structures, systems, and components (SSCs) that are necessary to implement the requirements of DOE Order (O) 420.1C, Facility Safety, and to ensure that the SSCs will be able to effectively perform their intended safety functions under the effects of natural phenomena hazards (NPHs).

44

DOE-STD-1090-2004 | Department of Energy  

Office of Environmental Management (EM)

Standard; Chapter 8 Hoists DOE-STD-1090-2004, Hoisting and Rigging Standard; Chapter 9 Mobile Cranes DOE-STD-1090-2004, Hoisting and Rigging Standard; Chapter 10 Forklifts Trucks...

45

DOE-ER-STD-6001-92 | Department of Energy  

Office of Environmental Management (EM)

ER-STD-6001-92 DOE-ER-STD-6001-92 March 12, 1996 Implementation Guide for Quality Assurance Programs for Basic and Applied Research Canceled (January, 2003) This Implementation...

46

DOE-STD-3025-99 | Department of Energy  

Office of Environmental Management (EM)

5-99 DOE-STD-3025-99 March 01, 1998 Quality Assurance Inspection and Testing of HEPA Filters Replaced by DOE-STD-3025-2007 | Superseding DOE NE F 3-43 (February 1990) This standard...

47

DOE-STD-1120-2005 | Department of Energy  

Office of Environmental Management (EM)

20-2005 DOE-STD-1120-2005 April 13, 2005 Integration of Environment, Safety, and Health into Facility Disposition Activities Subsequent to the initial release of DOE-STD-1120-98,...

48

DOE-STD-1061-93 | Department of Energy  

Office of Environmental Management (EM)

Guide to Good Practices for the Selection, Training, and Qualification of Shift Supervisors More Documents & Publications DOE-HDBK-1119-99 DOE-STD-1037-93 DOE-STD-1040-93...

49

DOE-STD-1161-2003 | Department of Energy  

Office of Environmental Management (EM)

3 DOE-STD-1161-2003 June 16, 2003 Mechanical Systems Functional Area Qualification Standard Replaced by DOE-STD-1161-2008 The Mechanical Systems Functional Area Qualification...

50

DOE-STD-1012-92 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-1012-92 September 18, 1996 DOE-STD-1012-92: Guide to Good Practices for On-The-Job Training Replaced by DOE-HDBK-1206-98 Training programs at DOE facilities should...

51

DOE-STD-1183-2004  

Broader source: Energy.gov [DOE]

Nuclear Safety Specialist Functional Area Qualification Standard Replaced by DOE-STD-1183-2007 The Nuclear Safety Specialist Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.

52

DOE-STD-1128-2008  

Broader source: Energy.gov [DOE]

Guide of Good Practices for Occupational Radiological Protection in Plutonium Facilities Replaced by DOE-STD-1128-2013 This Technical Standard (TS) does not contain any new requirements. Its purpose is to provide a guide to good practice, update existing reference material, and discuss practical lessons learned relevant to the safe handling of plutonium.

53

DOE-STD-1128-98  

Broader source: Energy.gov [DOE]

Guide of Good Practices for Occupational Radiological Protection in Plutonium Facilities Replaced by DOE-STD-1128-98 | Reaffirmation with Errata (May 2003) | Change Notice 1 (February 2005) This Technical Standard (TS) does not contain any new requirements. Its purpose is to provide guides to good practice, update existing reference material, and discuss practical lessons learned relevant to the safe handling of plutonium.

54

DOE-STD-1173-2003  

Broader source: Energy.gov [DOE]

Criticality Safety Functional Areq Qualification Standard Replaced by DOE-STD-1173-2009 The Criticality Safety Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy criticality safety personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.

55

DOE-STD-1185-2004  

Broader source: Energy.gov [DOE]

Nuclear Explosive Safety Study Functional Area Qualification Standard Replaced by DOE-STD-1185-2007 The Nuclear Explosive Safety Study Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.

56

DOE-STD-6003-96  

Broader source: Energy.gov [DOE]

Safety of Magnetic Fusion Facilities: Guidance This document provides guidance for the implementation of the requirements identified in DOE-STD-6002-96, Safety of Magnetic Fusion Facilities: Requirements. This guidance is intended for the managers, designers, operators, and other personnel with safety responsibilities for facilities designated as magnetic fusion facilities.

57

DOE-STD-1151-2002  

Broader source: Energy.gov [DOE]

Facility Representative Functional Area Qualification Standard Replaced by DOE-STD-1151-2010 The Facility Representative Functional Area Qualification Standard has been developed as a tool to assist DOE Program and Field offices in the development and implementation of the Technical Qualification Program in their organization.

58

DOE-STD-3006-2010  

Broader source: Energy.gov [DOE]

Planning and Conducting Readiness Reviews Superseding DOE-STD-3006-2000 (June 2000) This Standard provides standardized methods and approaches for planning and conducting RRs. This Standard also provides guidance for preparation of exemption requests in accordance with DOE O 251.1C. DOE O 425.1D requirements for RRs apply both to responsible contractors and to DOE

59

DOE-STD-1170-2003  

Broader source: Energy.gov [DOE]

Electrical Systems Functional Area Qualification Standard Replaced by DOE-STD-1170-2007 The Electrical Systems Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.

60

DOE-STD-1187-2005 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-1187-2005 DOE-STD-1187-2005 DOE-STD-1187-2005 May 12, 2005 Beryllium-Associated Worker Registry Data Collection and Management Guidance Replaced by DOE-STD-1187-2007 This standard provides acceptable methods for compliance with the requirements of title 10 Code of Federal Regulations, Part 850.39 (10 CFR 850.39) "Recordkeeping and Use of Information. '" It should be used by resposnbile employers subject to the requirements of 10 CFR 850 "Chronic Beryllium Disease Preventopm Program" to guide their submission of information to the Department of Energy (DOE) Beryllium-Associated Worker Registry. DOE-STD-1187-2005, Beryllium-Associated Worker Registry Data Collection and Management Guidance More Documents & Publications DOE-STD-1187-2007 DOE-STD-1190-2007

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

DOE-STD-3007-93  

Broader source: Energy.gov [DOE]

Guidelines for Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities Replaced by DOE-STD-3007-2007 | CHANGE NOTICE NO. 1 (September 1998) Contained in this document are guidelines that should be followed when preparing Criticality Safety Evaluations that will be used to demonstrate the safety of operations performed at Department of Energy (DOE) Non-Reactor Nuclear Facilities.

62

DOE-STD-1136-2004  

Broader source: Energy.gov [DOE]

Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities Replaced by DOE-STD-1136-2009 This Technical Standard (TS) provides operational guidance, practical lessons learned and experience gained, guides to good practice, and reference information on the safe handling of uranium. The TS provides information to assist uranium facilities in complying with Title 10 of the Code of Federal Regulations (CFR), Part 835, Occupational Radiation Protection (10 CFR 835) (DOE 1998a).

63

DOE-STD-1023-95  

Broader source: Energy.gov [DOE]

Natural Phenomena Hazards Assessment Criteri Replaced by DOE-STD-1020-2012 | Change Notice No. 1 (January 1996) | Reaffirmed with Errata (April 2002) It is the policy of the Department of Energy (DOE) to design, construct, and operate DOE facilities so that workers, the general public, and the environment are protected from the impacts of natural phenomena hazards (NPHs) on DOE facilities.It is the policy of the Department of Energy (DOE) to design, construct, and operate DOE facilities.

64

Nuclear Explosives Safety Evaluation Process (DOE-STD-3015-2004)  

Broader source: Energy.gov (indexed) [DOE]

SENSITIVE DOE-STD-3015-2004 November 2004 Superseding DOE-STD-3015-2001 DOE STANDARD NUCLEAR EXPLOSIVE SAFETY EVALUATION PROCESS U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Available on the Department of Energy Technical Standards Program Web site at http://tis.eh.doe.gov/techstds/. DOE-STD-3015-2004 iii FOREWORD This Department of Energy (DOE) Technical Standard is approved for use by the Assistant Deputy Administrator for Military Application and Stockpile Operations, National Nuclear Security Administration (NNSA), and is available for use with DOE O 452.1, NUCLEAR EXPLOSIVE AND WEAPON SURETY PROGRAM, and DOE O 452.2, SAFETY OF

65

DOE-EM-STD-5505-96; DOE Limited Standard Operations Assessments  

Broader source: Energy.gov (indexed) [DOE]

EM-STD-5505-96 EM-STD-5505-96 May 1996 DOE LIMITED STANDARD OPERATIONS ASSESSMENTS U.S. Department of Energy AREA OPER Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE96009462 DOE-EM-STD-5505-96 iii FOREWORD 1. This Department of Energy limited standard is approved for use by all DOE-EM field components. 2. Beneficial comments (recommendations, additions, deletions) and any pertinent data that

66

DOE-STD-1063-2000 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

3-2000 3-2000 DOE-STD-1063-2000 March 31, 2000 Establishing and Maintaining a Facility Representative Program at DOE Facilities Replaced by DOE-STD-1063-2006 | Superseding DOE-STD-1063-97 (October 1997) This standard, Facility Representatives, DOE-STD-1063-2000, defines the duties, responsibilities and qualifications for DOE Facility Representatives, based on facility hazard classification; risks to workers, the public, and the environment; and the operational activity level. DOE-STD-1063-2000, Establishing and Maintaining a Facility Representative Program at DOE Facilities More Documents & Publications 1Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report DOE-STD-1063-97 Incentives for the Department's Facility Representative Program,

67

Summary of New DOE-STD-1020-2011 NPH Analysis and Design Criteria for DOE Facilities  

Broader source: Energy.gov (indexed) [DOE]

Summary of New DOE-STD-1020-2011 Summary of New DOE-STD-1020-2011 NPH Analysis and Design Criteria for DOE Facilities (Proposed) Quazi Hossain, LLNL Joe Hunt, BWXT/Y-12 Robert Kennedy, RPK Consulting Carl Mazzola, Shaw Environmental, Inc. Steve McDuffie, DOE Gerald Meyers, DOE DOE Natural Phenomena Hazards Workshop October 25-26, 2011 Purpose of Revising the current version of DOE-STD-1020 * To conform to the new DOE O 420.1C (in review) that no longer refers to the Natural Phenomena Hazards (NPH) guidance document, DOE G 420.1-2 * To provide a single/central guidance document that the new DOE O 420.1C can require for NPH analysis and design criteria * To put back analysis and design requirements for all major NPHs in a single document that were fragmented when, with the issuance of STD-

68

DOE-STD-1155-2002 | Department of Energy  

Office of Environmental Management (EM)

55-2002 DOE-STD-1155-2002 October 10, 2002 Transportation and Traffic Management Functional Area Qualification The Transportation and Traffic Management Functional Area...

69

DOE-STD-1171-2003 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Safeguard and Security Functional Area Standard Replaced by DOE-STD-1171-2009 The Safeguards and Security (S&S) Functional Area Qualification Standard establishes common...

70

DOE-STD-1123-2009 | Department of Energy  

Office of Environmental Management (EM)

3-2009 DOE-STD-1123-2009 August 12, 2009 Safeguards and Security General Technical Base Qualification Standard The Safeguards and Security General Technical Base Qualification...

71

DOE-STD-1172-2003 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Functional Area Qualification Standard Replaced by DOE-STD-1172-2011 The Safety Software Quality Assurance Functional Area Qualification Standard establishes common functional...

72

DOE-STD-1111-2013 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

DOELAP technical standards listed below and is explained further in the supplemental handbook. DOE-STD-1111-2013, Laboratory Accreditation Program Administration More Documents &...

73

DOE-STD-1073-93 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Management Implementation, 101398 CRAD, Engineering - Office of River Protection K Basin Sludge Waste System Order Module--DOE-STD-1073-2003, CONFIGURATION MANAGEMENT...

74

DOE-STD-3024-2011 | Department of Energy  

Office of Environmental Management (EM)

DOE-STD-3024-98 This Standard provides criteria and guidance for the technical content and organizational structure of system design descriptions (SDDs) at Department of...

75

DOE-STD-1170-2007 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

7 DOE-STD-1170-2007 August 02, 2007 Electrical Systems and Safety Oversight Functional Area Qualification Standard The Electrical Systems and Safety Oversight FAQS establishes...

76

DOE-STD-1026-2009 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

6-2009 DOE-STD-1026-2009 February 18, 2009 NNSA Package Certification Engineer Functional Area Qualification Standard The NNSA Package Certification Engineer FAQS establishes...

77

DOE-STD-3006-95  

Broader source: Energy.gov [DOE]

Planning and Conduct of Operation Readiness Reviews Replaced by DOE-STD-3006-2000 DOE 0 425.1 specifies the conditions and circumstances when an Operational Readiness Review (ORR) or a Readiness Assessment (RA) is required as part of a new start or restart process. This standard provides guidance on the planning and conduct of the Operational Readiness Reviews. This standard also provides guidance for requesting exemptions. The requirements for ORRs and RAs apply both to responsible contractors and to DOE. This standard addresses the requirements and suggests methods and approaches for both.

78

DOE-STD-1090-2007; Hoisting and Rigging Standard (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

2 2 CRITICAL LIFTS 2-i Chapter 2 Critical Lifts This chapter provides guidelines for critical-lift determination and requirements for planning and performing a critical lift safely and judiciously. 2.1 CRITICAL-LIFT DETERMINATION ................................................................ 2-1 2.2 CRITICAL-LIFT REQUIREMENTS ............................................................. 2-2 DOE-STD-1090-2007 Chapter 2 2-ii Critical Lifts INTENTIONALLY BLANK DOE-STD-1090-2007 2.1 CRITICAL-LIFT DETERMINATION 2-1 Chapter 2 Critical Lifts a. An appointed person shall classify each lift into one of the DOE categories (ordinary, critical, or preengineered production) prior to planning the lift. b. A lift shall be designated critical if any of

79

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

2 2 CRITICAL LIFTS 2-i Chapter 2 Critical Lifts This chapter provides guidelines for critical-lift determination and requirements for planning and performing a critical lift safely and judiciously. 2.1 CRITICAL-LIFT DETERMINATION ................................................................ 2-1 2.2 CRITICAL-LIFT REQUIREMENTS ............................................................. 2-2 DOE-STD-1090-2004 Chapter 2 2-ii Critical Lifts INTENTIONALLY BLANK DOE-STD-1090-2004 2.1 CRITICAL-LIFT DETERMINATION 2-1 Chapter 2 Critical Lifts a. An appointed person shall classify each lift into one of the DOE categories (ordinary, critical, or preengineered production) prior to planning the lift. b. A lift shall be designated critical if any of

80

DOE-STD-1063-2000 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

0 0 DOE-STD-1063-2000 March 31, 2000 Establishing and Maintaining a Facility Representative Program at DOE Facilities Replaced by DOE-STD-1063-2006 | Superseding DOE-STD-1063-97 (October 1997) This standard, Facility Representatives, DOE-STD-1063-2000, defines the duties, responsibilities and qualifications for DOE Facility Representatives, based on facility hazard classification; risks to workers, the public, and the environment; and the operational activity level. DOE-STD-1063-2000, Establishing and Maintaining a Facility Representative Program at DOE Facilities More Documents & Publications 1Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report 4Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

DOE-STD-1137-2007 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

7 7 DOE-STD-1137-2007 December 05, 2007 DOE-STD-1137-2007: Fire Protection Engineering Functional Area Qualification Standard Supersedes DOE-STD-1137-2000 - July 2000 Fire protection engineers use science and technology to evaluate the effects of fires to protect workers, public, people, environment, and property. They analyze how facilities are used, how fires start and grow, and how fire and smoke affect people, buildings and property. Fire protection engineers evaluate many facets of the fire protection field. DOE-STD-1137-2007, Fire Protection Engineering Functional Area Qualification Standard More Documents & Publications FAQS Gap Analysis Qualification Card - Fire Protection Engineering DOE-STD-1137-2000 FAQS Job Task Analyses - Fire Protection Engineering

82

Change Notice for DOE-STD-3013-2000  

Broader source: Energy.gov (indexed) [DOE]

18-891 18-891 EFG 107-9OJ United States Government Department of Energy memorandum aEPLY To ATTN OF: EM-21 (T. Kiess, (301) 903-1446; G. Roberson, (505) 845-5805) SUBJECT: Change Notice for Authorization of a Procedural Allowance to Rocky Flats Environmental Technology Site To: Richard Serbu, Office of Nuclear Safety Policy and Standards, EH-3 1 This memorandum provides a "Change Notice," required by the Department of Energy (DOE) Technical Standards Program Procedures document, "Maintenance of DOE Technical Standards" (DOE-TSPP-9, Rev. 5). The addendum to this memorandum describes a procedural allowance to the Rocky Flats Environmental Technology Site. This allowance is a lmm modification to the 126mm diameter specification in Section 6.2.2, item 3, of DOE-STD-3013. This Inn-n modification

83

DOE-STD-1153-2002 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

3-2002 3-2002 DOE-STD-1153-2002 August 14, 2002 A Graded Approach for Evaluating Radiation Doses to Aquatic and Terrestrial Biota This technical standard provides methods, models, and guidance within a graded approach that the U.S. Department of Energy (DOE) and its contractors may use to evaluate doses of ionizing radiation to populations of aquatic animals, terrestrial plants, and terrestrial animals from DOE activities for the purpose of demonstrating protection relative to Dose Rate Guidelines. A Graded Approach for Evaluating Radiation Doses to Aquatic and Terrestrial Biota - Front Matter A Graded Approach for Evaluating Radiation Doses to Aquatic and Terrestrial Biota - Module 1 A Graded Approach for Evaluating Radiation Doses to Aquatic and Terrestrial Biota - Module 2

84

Docket EE-RM/STD-02-112  

Broader source: Energy.gov (indexed) [DOE]

Energy Conservation Standards for New Federal Commercial and Multi-Family High-Rise Residential Energy Conservation Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings and New Federal Low-Rise Residential Buildings DOCKET NUMBER: EE-RM/STD-02-112 CLOSING DATE: 02/02/2007 COMMENT NUMBER DATE RECEIVED /DATE OF LETTER NAME & TITLE OF COMMENTATOR AFFILIATION & ADDRESS OF COMMENTATOR 1 01/31/07 01/31/07 Thomas D. Culp, Ph.D Consultant Birch Point Consulting LLC W6025 Rim of the City Road La Cross, WI 54601 2 02/01/07 02/01/07 Renee LaMura Director of Member Services Polyisocyanurate Insulation Manufacturers Association (PIMA) 7315 Wisconsin Ave., Suite 400E Bethesda, MD, 20814 3 02/01/07 02/01/07 Rick L. Landers Business Manager Office of the Chief Engineer Capital Improvements Business Links Naval Facilities Engineering Command

85

DOE-STD-1186-2004; Specific Administrative Controls  

Broader source: Energy.gov (indexed) [DOE]

SENSITIVE DOE-STD-1186-2004 August 2004 DOE STANDARD SPECIFIC ADMINISTRATIVE CONTROLS U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1186-2004 ii Available on the Department of Energy Technical Standards Program Web site at http://tis.eh.doe.gov/techstds/. DOE-STD-1186-2004 iii TABLE OF CONTENTS Paragraph Page TABLE OF CONTENTS..................................................................................................................... iii ABBREVIATIONS AND ACRONYMS............................................................................................... iv 1. INTRODUCTION

86

DOE-STD-1090-2004 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

4 4 DOE-STD-1090-2004 June 01, 2004 Hoisting and Rigging Standard The U.S. Department of Energy (DOE) Hoisting and Rigging Standard is intended as a reference document to be used by supervisors, line managers, safety personnel, equipment operators, and any other personnel responsible for safety of hoisting and rigging operations at DOE sites. The standard quotes verbatim or paraphrases (with minor editorial changes for consistency) the requirements of the U.S. Occupational Safety and Health Administration (OSHA) and the American National Standards Institute (ANSI). DOE-STD-1090-2004, Hoisting and Rigging Standard; Cover DOE-STD-1090-2004, Hoisting and Rigging Standard; Table of Contents & Front Matter DOE-STD-1090-2004, Hoisting and Rigging Standard; Chapter 1 Terminology and

87

DOE-STD-1107-97 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

November 08,2007 DOE-STD-1107-97: Knowledge, Skills, and Abilities for Key Radiation Protection Positions at DOE Facilities Change Notice No. 1 (November 2007) This document...

88

DOE-STD-1068-94 | Department of Energy  

Office of Environmental Management (EM)

8-94 DOE-STD-1068-94 May 09, 1996 Guide to Good Practices for Maintenance History at DOE Nuclear Facilities Canceled This guide is intended to assist facility maintenance...

89

DOE-STD-1157-2002; Environmental Restoration Functional Area...  

Office of Environmental Management (EM)

a. Discuss the properties of high pressure and low pressure systems and their impact on air pollution. b. Discuss the following horizontal dispersion terms: DOE-STD-1157-2002 10...

90

DOE-STD-1083-95 | Department of Energy  

Office of Environmental Management (EM)

and Granting Exemptions to Nuclear Safety Rules Replaced by DOE-STD-1083-2009 DOE may grant temporary or permanent exemptions to its nuclear safety rules provided that the...

91

DOE-STD-1150-2002 | Department of Energy  

Office of Environmental Management (EM)

150-2002 DOE-STD-1150-2002 April 22, 2002 Quality Assurance Functional Area Qualification Standard Replaced by DOE-1150-2013 This QA Functional Area Qualification Standard...

92

DOE-STD-1030-96 | Department of Energy  

Energy Savers [EERE]

for, Lockouts and Tagouts, Chapter IX of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities DOE-STD-1030-95, DOE Standard Guide...

93

DOE-STD-1029-92 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Guide for Technical Procedures More Documents & Publications Microsoft Word - Policy Flash 2010-73 Attachment 5 Order Module--DOE Order 422.1, CONDUCT OF OPERATIONS DOE-STD-1068-94...

94

DOE-STD-1033-92 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

with information that can be used to validate andor modify existing programs relative to Conduct of Operations. DOE-STD-1033-92, Guide to Good Practices for Operations and...

95

DOE-STD-1038-93 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

for, Operations Turnover, Chapter XII of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. DOE-STD-1038-93, Guide to Good...

96

DOE-STD-1034-93 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

for, Timely Orders to Operators, Chapter XV of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. DOE-STD-1034-93, Guide to Good...

97

DOE-STD-1044-93 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

and Piping Labeling," Chapter XVIII of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. DOE-STD-1044-93 CN-1, Guide to Good...

98

DOE-STD-1039-93 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

of Equipment and System Status, Chapter VIII of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. DOE-STD-1039-93, Guide to Good...

99

DOE-DP-STD-3016-99 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

1999 DOE-DP-STD-3016-99: Limited Standard; Hazard Analysis Reports for Nuclear Explosive Operations Replaced by DOE-NA-3016-2006 This technical standard applies to the conduct of...

100

DOE-STD-1098-99 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

99 DOE-STD-1098-99 January 26, 2005 Radiological Control It is the policy of DOE to conduct its radiological operations in a manner that ensures the health and safety of all its...

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

DOE-STD-1032-92 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Organization and Administration, Chapter I of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. DOE-STD-1032-92 Change Notice 1,...

102

DOE-STD-1043-93 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

for, Operator Aid Postings, Chapter XVII of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. DOE-STD-1043-93 CN-1, Guide to Good...

103

DOE-STD-1035-93 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

direction for, Logkeeping, Chapter XI of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. DOE-STD-1035-93, Guide to Good...

104

DOE-STD-3026-99 | Department of Energy  

Office of Environmental Management (EM)

6-99 DOE-STD-3026-99 February 24, 2009 Filter Test Facility Quality Program Plan Superseding DOE NE F 3-44 July 1986 This standard was developed primarily for application in U.S....

105

DOE-STD-3024-98 | Department of Energy  

Office of Environmental Management (EM)

4-98 DOE-STD-3024-98 August 11, 2005 Content of System Design Descriptions This section provides background information concerning the purpose and functions of System Design...

106

DOE-STD-1065-94 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

5-94 DOE-STD-1065-94 June 13, 1996 Guideline to Good Practices for Postmaintenance Testing at DOE Nuclear Facilities Canceled This guide is intended to assist facility maintenance...

107

DOE-STD-1121-2008 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-1121-2008 DOE-STD-1121-2008 DOE-STD-1121-2008 November 14, 2013 DOE-STD-1121-2008, Internal Dosimetry Change Notice 1 October 2013 This technical standard is created to provide a resource for those engaged in the science and practice of internal dosimetry within the DOE complex. This standard defines minimum levels of acceptable performance and provides basic procedural guidelines for evaluating the internal radiation equivalent and effective dose that may be received by radiation workers from intakes of radionuclides. This set of defined internal dosimetry performance criteria meets the requirements set forth in 10 CFR 835 for monitoring the workplace, for assessing internal radiation doses to workers at DOE facilities, and for recording and reporting requirements as they

108

DOE-STD-1098-99 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

99 99 DOE-STD-1098-99 January 26, 2005 Radiological Control It is the policy of DOE to conduct its radiological operations in a manner that ensures the health and safety of all its employees, contractors, and the general public. In achieving this objective, the Department shall ensure that radiation exposures to its workers and the public and releases of radioactivity to the environment are maintained below regulatory limits and deliberate efforts are taken to further reduce exposures and releases as low as reasonably achievable. The Department is fully committed to implementing a radiological control program of the highest quality that consistently reflects this policy. DOE-STD-1098-99, Radiological Control More Documents & Publications DOE-STD-1098-2008

109

DOE-STD-1047-2008 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

7-2008 7-2008 DOE-STD-1047-2008 September 03, 2008 Safety Functions and Other Features of Remotely Operated Weapon Systems This standard summarizes safety functions and other features of Remotely Operated Weapon Systems (ROWS) requested most frequently by users and safety personnel at sites of the U.S. Department of Energy (including the National Nuclear Security Administration). These design features are intended to improve the safety, reliability, and ease of use of these systems; they may also improve the performance of these systems. DOE-STD-1047-2008, Safety Functions and Other Features of Remotely Operated Weapon Systems More Documents & Publications DOE-STD-1193-2010 All Active DOE Technical Standards Document Technical Standards, DOE Orders and Applicable CFRs/DEAR

110

DOE-STD-0100T-93 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

0100T-93 0100T-93 DOE-STD-0100T-93 July 12, 1996 Licensed Reactor Nuclear Safety Criteria Applicable to DOE Reactors Canceled | Superseding DOE/NE-0100T (April 1991) This document identifies nuclear safety criteria applied to licensed reactors. The degree of application of these criteria to a DOE-owned reactor, consistent with their application to comparable licensed reactors, must be determined by the DOE and DOE contractor. DOE-STD-0100T-93, Licensed Reactor Nuclear Safety Criteria Applicable to DOE Reactors More Documents & Publications DOE-STD-101-92 National Report Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management DOE Draft Standard, Development and Use of Probabilistic Risk Assessments in Department of Energy Nuclear Safety Applications, 12/10

111

DOE-STD-1167-2003 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

7-2003 7-2003 DOE-STD-1167-2003 February 4, 2004 Respiratory Acceptance Program for Supplied-Air Suits The supplied-air suits that protect DOE contractor and federal employees from exposure to harmful atmospheres and radioactive contaminants are not included in the National Institute for Occupational Safety and Health (NIOSH) certification process for respiratory protective devices. Therefore, with the awareness and acknowledgement of NIOSH and the Occupational Safety and Health Administration (OSHA), the Department established a system for acceptance testing of supplied-air suits. DOE-STD-1167-2003, Respiratory Acceptance Program for Supplied-Air Suits More Documents & Publications All Active DOE Technical Standards Document DOE-STD-3025-99 Enforcement Letter, WEL-2013-02

112

DOE-STD-1073-2003 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

2003 2003 DOE-STD-1073-2003 October 27, 2003 Configuration Management Program The purpose of this standard is to define the objectives of a configuration management process for DOE nuclear facilities (including activities and operations), and to provide detailed examples and supplementary guidance on methods of achieving those objectives. Configuration management is a disciplined process that involves both management and technical direction to establish and document the design requirements nd the physical configuration of the nuclear facility and to ensure that they remain consistent with each other and the documentation. DOE-STD-1073-2003, Configuration Management Program More Documents & Publications Order Module--DOE-STD-1073-2003, CONFIGURATION MANAGEMENT

113

DOE-STD-1170-2007 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

7 7 DOE-STD-1170-2007 August 02, 2007 Electrical Systems and Safety Oversight Functional Area Qualification Standard The Electrical Systems and Safety Oversight FAQS establishes general and specific functional area competency requirements for all DOE Electrical Systems and Safety Oversight personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE's defense nuclear facilities and, when appropriate, to other DOE facilities. DOE-STD-1170-2007, Electrical Systems and Safety Oversight Functional Area Qualification Standard More Documents & Publications DOE-STD-1170-2003 FAQS Qualification Card - Electrical Systems and Safety Oversight FAQS Job Task Analyses - Electrical Systems and Safety Oversight

114

DOE-STD-1170-2007 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

70-2007 70-2007 DOE-STD-1170-2007 August 02, 2007 Electrical Systems and Safety Oversight Functional Area Qualification Standard The Electrical Systems and Safety Oversight FAQS establishes general and specific functional area competency requirements for all DOE Electrical Systems and Safety Oversight personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE's defense nuclear facilities and, when appropriate, to other DOE facilities. DOE-STD-1170-2007, Electrical Systems and Safety Oversight Functional Area Qualification Standard More Documents & Publications FAQS Qualification Card - Electrical Systems and Safety Oversight FAQS Job Task Analyses - Electrical Systems and Safety Oversight

115

EERE-2010-BT-STD-0027 Ex Parte Letter NEMA Motor Training re...  

Broader source: Energy.gov (indexed) [DOE]

0-BT-STD-0027 Ex Parte Letter NEMA Motor Training re DOE Motors Rule 15 July 2013. EERE-2010-BT-STD-0027 Ex Parte Letter NEMA Motor Training re DOE Motors Rule 15 July 2013. This...

116

Safety, software architecture and MIL-STD-1760  

Science Journals Connector (OSTI)

Integrating modern aircraft stores, particularly weapons, creates a complex system of systems challenge. The traditional approach to such integrations was for each to be a stand-alone program. For each program a unique interface would usually be implemented, ... Keywords: MIL-STD-1760, architecture, safety, software

Matthew John Squair

2007-05-01T23:59:59.000Z

117

DOE-STD-1153-2002; A Graded Approach for Evaluating Radiation Doses to Aquatic and Terrestrial Biota  

Broader source: Energy.gov (indexed) [DOE]

2 2 DETAILED GUIDANCE MODULE 2: DETAILED GUIDANCE DOE-STD-1153-2002 INTENTIONALLY BLANK DOE-STD-1153-2002 M2-1 1 The Graded Approach, Ecological Risk Assessment, and Guidance on Their Implementation in Evaluating Radiation Doses to Biota The graded approach was made available to DOE field and program elements and to external users for a trial use period beginning in July 2000 as an interim version of this technical standard. The purpose of the trial period was to give users an opportunity to become familiar with and implement the graded approach at their sites, and to have an opportunity to provide suggestions and lessons learned to the BDAC regarding any refinements and associated guidance that needed to be incorporated into the graded approach prior to finalizing the technical standard. During this trial period the graded approach received strong interest and requests from

118

DOE-STD-1128-98 Change Notice Memorandum  

Broader source: Energy.gov (indexed) [DOE]

united States Government Department of Energy united States Government Department of Energy memorandum DATE: REPLY TO ATTN OF: SUBJECT: TO: J a n u a r y 31, 2005 EH-52:Peter 0' Connell: 3-564 1 CHANGE NOTICE TO DEPARTMENT OF ENERGY (DOE) STANDARD, DOE-STD- 1 128-98 Dennis Kubicki, EH-24 This memorandum forwards changes to subject DOE Technical Standard, DOE-STD-1128- 98, "Guide of Good Practices for Occupational Radiological Protection in Plutonium Facilities." The changes are being made as part of a review of the document following conversion into Word 2002 format. The attached table details the changes. A disk of the revised document in Word format is also attached. If there are any questions, please contact Mr. Peter O'Connell of my staff on 3-5641 or by email (Peter.O'Connell@ eh.doe.gov).

119

DOE-STD-6005-2001; Industrial Hygiene Practices  

Broader source: Energy.gov (indexed) [DOE]

April 30, 200132 April 30, 200132 DOE-STD-6005-2001 April 2001 DOE STANDARD INDUSTRIAL HYGIENE PRACTICES U.S. Department of Energy AREA OCSH Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-6005-2001 iii TABLE OF CONTENTS PARAGRAPH PAGE FOREWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v 1. SCOPE

120

DOE-STD-1024-92 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

4-92 4-92 DOE-STD-1024-92 March 22, 1996 Guidelines for Use of Probabilistic Seismic Hazard Curves at Department of Energy Sites for Department of Energy Facilities Change Notice 1(January 1996) | Canceled Effective October 2001, due to FY 2001 Sunset Review The issue of the seismic hazard to be used in safety or risk assessments has recently been raised at a number of Department of Energy (DOE) facilities. One of the technical issues associated with this topic is the existence and use of two different methodologies for the development of seismic hazard curves by Lawrence Livermore National Laboratory (LLNL) and the Electric Power Research Institute (EPRI). DOE-STD-1024-92, Guidelines for Use of Probabilistic Seismic Hazard Curves at Department of Energy Sites for Department of Energy Facilities

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

DOE-EM-STD-5505-96 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

5-96 5-96 DOE-EM-STD-5505-96 May 24, 1996 DOE Limited Standard Operations Assessments Canceled, Effective October 2001, due to FY 2001 Sunset Review Conduct of operations includes those attitudes, processes, and precautions taken in the interest of safety. The exact features of a system of conduct of operations may be different at different activities. The common feature is a formality of operations which will vary in form and degree depending on the conditions and hazards of the activity. The most intensive application of conduct of operations would be found at the most hazardous activities subject to repetitive types of evolutions. DOE-EM-STD-5505-96, DOE Limited Standard Operations Assessments More Documents & Publications OPS 9.9 Lockouts and Tagouts 4/10/01

122

DOE-STD-3026-99 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

6-99 6-99 DOE-STD-3026-99 February 24, 2009 Filter Test Facility Quality Program Plan Superseding DOE NE F 3-44 July 1986 This standard was developed primarily for application in U.S. Department of Energy programs. It contains specific direction for HEPA filter testing performed at a DOE-accepted HEPA Filter Test Facility (FTF). Beneficial comments (recommendations, additions, deletions) and any pertinent data that may improve this document should be sent to the Office of Nuclear Safety Policy and Standards (EH-31), U.S. Department of Energy, Washington, D.C. 20585, by letter or by using the self-addressed Document Improvement Proposal form (DOE F 1300.3) appearing at the end of this document. DOE-STD-3026-99: Filter Test Facility Quality Program Plan More Documents & Publications

123

DOE-STD-1045-93 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

5-93 5-93 DOE-STD-1045-93 December 14,1998 Guide to Good Practices for Notifications and Investigation of Abnormal Events Change Notice No. 1 (December 1998) | Reaffirmed 2001 "Notifications" and "Investigation of Abnormal Events" are elements of an effective Conduct of Operations program. The complexity and array of activities performed in DOE facilities dictate the necessity for a coordinated notifications program and a consistent method for investigating abnormal events to promote safe and efficient operations. DOE-STD-1045-93, Guide to Good Practices for Notifications and Investigation of Abnormal Events More Documents & Publications OPS 9.7 Notifications 8/24/98 OPS 9.6 Investigation of Abnormal Events 8/24/98 Technical Standards,DOE Standards and Corresponding Directives

124

DOE-STD-1066-99; Fire Protection Design Criteria  

Broader source: Energy.gov (indexed) [DOE]

6-99 6-99 July 1999 Superseding DOE-STD-1066-97 DOE STANDARD FIRE PROTECTION DESIGN CRITERIA U.S. Department of Energy AREA FIRP Washington, D.C. 20585 DISTRIBUTION STATEMENT. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1066-99 iii FOREWORD This Department of Energy (DOE) Standard is approved for use by all DOE elements and their contractors. DOE Standards are part of the DOE Directives System and are issued to provide supplemental

125

DOE-STD-1083-2009 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

83-2009 83-2009 DOE-STD-1083-2009 June 29, 2009 Processing Exemptions to Nuclear Safety Rules and Approval of Alternative Methods for Documented Safety Analyses DOE may grant temporary or permanent exemptions from its nuclear safety requirements in rules provided that the provisions of 10 C.F.R. Part 820, Subpart E, ""Exemption Relief,"" are met. The provisions of 10 C.F.R. Part 820 state that the Secretarial Officer (defined in 10 C.F.R. Part 820) shall utilize any procedures deemed necessary and appropriate to comply with the exemption responsibilities. This Standard establishes acceptable procedures that may be used to request and grant exemptions to DOE nuclear safety rules in accordance with 10 C.F.R. Part 820. DOE-STD-1083-2009, Processing Exemptions to Nuclear Safety Rules and

126

DOE-STD-1628-2013 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

628-2013 628-2013 DOE-STD-1628-2013 November 4, 2013 Development of Probabilistic Risk Assessments for Nuclear Safety Applications The purpose of this Standard is to provide a consistent approach and process for planning, executing, and using PRAs in nuclear safety applications. This Standard is a process standard that builds upon and refers to recognized industry standards and guidance for details on how specific aspects of the process may be implemented. This Standard provides a set of references to guide project teams in the performance of probabilistic risk assessments. DOE-STD-1628-2013, Development of Probabilistic Risk Assessments for Nuclear Safety Applications More Documents & Publications DOE Draft Standard, Development and Use of Probabilistic Risk Assessments

127

DOE-STD-1083-2009 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

2009 2009 DOE-STD-1083-2009 June 29, 2009 Processing Exemptions to Nuclear Safety Rules and Approval of Alternative Methods for Documented Safety Analyses DOE may grant temporary or permanent exemptions from its nuclear safety requirements in rules provided that the provisions of 10 C.F.R. Part 820, Subpart E, ""Exemption Relief,"" are met. The provisions of 10 C.F.R. Part 820 state that the Secretarial Officer (defined in 10 C.F.R. Part 820) shall utilize any procedures deemed necessary and appropriate to comply with the exemption responsibilities. This Standard establishes acceptable procedures that may be used to request and grant exemptions to DOE nuclear safety rules in accordance with 10 C.F.R. Part 820. DOE-STD-1083-2009, Processing Exemptions to Nuclear Safety Rules and

128

DOE-STD-1185-2007  

Broader source: Energy.gov [DOE]

Nuclear Explosive Safety Study Functional Area Qualification Standard CHANGE NOTICE NO.1 (April 2010) A Nuclear Explosive Safety Study (NESS) is performed on all DOE Nuclear Explosive Operations (NEOs) in accordance with DOE O 452.1D, Nuclear Explosive and Weapon Surety Program; DOE O 452.2D, Nuclear Explosive Safety; and DOE M 452.2-2, Nuclear Explosive Safety Evaluation Processes.

129

DOE-STD-3009-94  

Broader source: Energy.gov [DOE]

Preparation Guide for U. S. Department of Energy Nonreactor Nuclear Facility Documented Safety Analysis CHANGE NOTICE NO. 1 (January 2000) | CHANGE NOTICE NO. 2 (April 2002) This Standard describes a DSA preparation method that is acceptable to the DOE as delineated for those specific facilities listed in Table 2 of Appendix A, “General Statement of Safety Basis Policy”, to Subpart B, “Safety Basis Requirements”, of 10 CFR 830. It was developed to assist Hazard Category 2 and 3 facilities. in preparing SARs that will satisfy the requirements of 10 CFR 830.

130

Docket No. EERE-2010-BT-STD-0027 Energy Conservation Standards...  

Broader source: Energy.gov (indexed) [DOE]

No. EERE-2010-BT-STD-0027 Energy Conservation Standards for Commercial and Industrial Electric Motors: Public Meeting and Availability of the Preliminary Technical Support...

131

Frequently Asked Questions Regarding DOE-STD-1195-2011, Design...  

Office of Environmental Management (EM)

Frequently Asked Questions Regarding DOE-STD-1195-2011, Design of Safety Significant Safety Instrumented Systems Used at DOE Non-Reactor Nuclear Facilities Frequently Asked...

132

DOE-STD-1197-2011  

Broader source: Energy.gov [DOE]

Occurrence Reporting Causal Analysis The purpose of causal analysis is to identify and understand the causes (both individual and organizational) that contributed to an occurrence in order to correct deficiencies. DOE O 232.2, Occurrence Reporting and Processing of Operations Information, requires the investigation and analysis of occurrences. Pursuant to DOE O 232.2, causal analyses of occurrences and near misses must go beneath the surface to identify how the underlying sources of operational vulnerability combined to produce unintended or undesired results.

133

DOE-STD-3015-2004  

Broader source: Energy.gov [DOE]

Nuclear Explosive Safety Evaluation Process Cancelled This technical standard provides specific information regarding nuclear explosive safety studies (NESSs), operational safety reviews (OSRs), and nuclear explosive safety change evaluations (NCEs) and is in accordance with DOE O 452.2, Safety of Nuclear Explosive Operations.

134

DOE-STD-1194-2011  

Broader source: Energy.gov [DOE]

Nuclear Materials Control and Accountability CHANGE NOTICE No. 2 (DECEMBER 2012) This document describes establishing and maintaining a Material Control and Accountability (MC&A) program, where each MC&A program element is a part of a quality MC&A program. Each site/facility operator needs to establish a sustainable, effective graded safeguards program for the control and accounting of nuclear materials to detect and deter theft and diversion, and to prevent the unauthorized control of a weapon, test device, or materials that can be used to make an improvised nuclear device.

135

Mechanical Systems Qualification Standard DOE-STD-1161-2008  

Broader source: Energy.gov (indexed) [DOE]

Mechanical Systems Mechanical Systems Qualification Standard DOE-STD-1161-2008 August 2012 Reference Guide The Functional Area Qualification Standard References Guides are developed to assist operators, maintenance personnel, and the technical staff in the acquisition of technical competence and qualification within the Technical Qualification Program (TQP). Please direct your questions or comments related to this document to Patrick C. Romero, Deputy TQP Manager, Office of Leadership and Career Management, NNSA Albuquerque Complex, 505.845.6371. This page is intentionally blank. ii Table of Contents FIGURES ....................................................................................................................................... v TABLES ....................................................................................................................................... vii

136

DOE-STD-1098-99; Radiological Control  

Broader source: Energy.gov (indexed) [DOE]

NOT MEASUREMENT NOT MEASUREMENT SENSITIVE DOE-STD-1098-99 July 1999 Reaffirmation December 2004 DOE STANDARD RADIOLOGICAL CONTROL U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. ii This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National

137

Docket No's EERE-2010-BT-TP-0044 andEERE-2010-BT-STD-0043 Energy...  

Energy Savers [EERE]

EERE-2010-BT-STD-0043 Energy Conservation Program: Energy Conservation Standards and Test Procedures for HID Lamps Docket No's EERE-2010-BT-TP-0044 and EERE-2010-BT-STD-0043...

138

Order Module--DOE STD-1098-2008, DOE STANDARD: RADIOLOGICAL CONTROL |  

Broader source: Energy.gov (indexed) [DOE]

STD-1098-2008, DOE STANDARD: RADIOLOGICAL CONTROL STD-1098-2008, DOE STANDARD: RADIOLOGICAL CONTROL Order Module--DOE STD-1098-2008, DOE STANDARD: RADIOLOGICAL CONTROL "The radiological control program discussed in DOE-STD-1098-2008 goes beyond the scope of, and includes more details than, the documented radiation protection program (RPP) required by 10 CFR 835, -Occupational Radiation Protection.‖ To ensure implementation of a comprehensive and coherent radiological control program that exceeds basic requirements and provides a substantial safety margin, DOE encourages its contractors to implement the provisions of DOE-STD-1098- 2008 to the extent appropriate to facility hazards and operations, consistent with DOE's integrated safety management program. Should any conflicts arise between the site-specific radiological control manual and the documented RPP, the

139

Ex Parte Communication - Docket EERE-2012-BT-STD-0022 | Department of  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- Docket EERE-2012-BT-STD-0022 - Docket EERE-2012-BT-STD-0022 Ex Parte Communication - Docket EERE-2012-BT-STD-0022 On September 5, 2012, representatives from PJM Interconnection LLC, National Rural Electric Cooperatives Association, Edison Electric Institute, American Public Power Association, and the Steffes Corporation (together, "Joint Commenters") met with members of the Department of Energy ("Department") to discuss the request for information "[...] Energy Conservation Standards for Residential Water Heaters" and the comments filed therein. DOE_EnergyEfficiencyStandardsForLargeVolumeWaterHeaters.pdf More Documents & Publications Ex Parte Communication, Docket EERE-2012-BT-STD-0022 Ex Parte Communication, Docket EERE-2012-BT-STD-0022 PJM Presentation - The Silver Bullet: Storage! (July 12, 2011)

140

Order Module--DOE-STD-1063-2011, FACILITY REPRESENTATIVES | Department of  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-1063-2011, FACILITY REPRESENTATIVES DOE-STD-1063-2011, FACILITY REPRESENTATIVES Order Module--DOE-STD-1063-2011, FACILITY REPRESENTATIVES The familiar level of this module is divided into three sections. The first section addresses the purpose and scope of DOE-STD-1063-2011, the purpose of the FR program, and the duties, responsibilities, and authorities of FRs and other key personnel. In the second section, the requirements of the FR program are discussed. The third section covers the three appendices of this standard: FR performance indicators, an FR program assessment guide, and the process to determine FR staffing. We have provided examples and a practice to help familiarize you with the material. The practice will also help prepare you for the criterion test. DOE Order Self Study Modules - DOE STD 1063, Facility Representatives

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Ex Parte Communication In Connection with DocketNo.EERE-2010-BT-STD-Q027  

Broader source: Energy.gov (indexed) [DOE]

0-BT-STD-Q027 Energy Efficiency Program for Certain 0-BT-STD-Q027 Energy Efficiency Program for Certain Commercial and Industrial Equipment Ex Parte Communication In Connection with DocketNo.EERE-2010-BT-STD-Q027 Energy Efficiency Program for Certain Commercial and Industrial Equipment This memorandum memorializes another communication involving a follow-up to the Motor Coalition's previous communications in connection with this proceeding and documented in a memorandum dated April18, 2012. ExParteMemo.pdf More Documents & Publications Ex Parte Communication In Connection with DocketNo.EERE-201D-BT-STD-Q027 Docket No. EERE-2010-BT-STD-0027 Energy Conservation Standards for Commercial and Industrial Electric Motors: Public Meeting and Availability of the Preliminary Technical Support Document 77 Fed. Reg. 43015 (July 23,

142

DOE-STD-1042-93 CN-1; Guide to Good Practices for Control Area Activities  

Broader source: Energy.gov (indexed) [DOE]

2-93 2-93 June 1993 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR CONTROL AREA ACTIVITIES U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No.1 DOE-STD-1042-93 December 1998 Guide to Good Practices for Operations Turnover Page/Section Change Concluding Material Preparing Activity was changed from

143

DOE-STD-1162-2003; Instrumentation and Control Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

2-2003 2-2003 June 2003 DOE STANDARD INSTRUMENTATION AND CONTROL FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited NOT MEASUREMENT SENSITIVE This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1162-2003 iii

144

DOE-STD-1036-93; Guide to Good Practices for Independent Verification  

Broader source: Energy.gov (indexed) [DOE]

6-93 6-93 June 1993 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR INDEPENDENT VERIFICATION U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No. 1 DOE-STD-1036-93 December 1998 Guide to Good Practices for Independent Verification Page / Section Change p. 11 / Section 4.1.2

145

DOE-STD-1111-98; The Department of Energy Laboratory Accreditation Program Administration  

Broader source: Energy.gov (indexed) [DOE]

1-98 1-98 December 1998 DOE STANDARD THE DEPARTMENT OF ENERGY LABORATORY ACCREDITATION PROGRAM ADMINISTRATION U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1111-98 iii FOREWORD 1. This Department of Energy (DOE) standard is approved for use by all DOE components and their contractors. 2. Beneficial comments (recommendations, additions, deletions) and any pertinent data that may improve

146

DOE-STD-1031-92; Guide to Good Practices for Communications  

Broader source: Energy.gov (indexed) [DOE]

31-92 31-92 December 1992 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR COMMUNICATIONS U.S. Department of Energy FSG 58GP Washington, D.C. 20585 DISTRIBUTION STATEMENT A:Approved for public release; distribution unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No.1 DOE-STD-1031-92 December 1998 Guide to Good Practices for Communications Page/Section Change pg. 9 / section 4.1.2.6 This section was added.

147

DOE-STD-1187-2005; Beryllium-Associated Worker Registry Data Collection and Management Guidance  

Broader source: Energy.gov (indexed) [DOE]

5 5 May 2005 DOE TECHNICAL STANDARD Beryllium-Associated Worker Registry Data Collection and Management Guidance U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited NOT MEASUREMENT SENSITIVE DOE-STD-1187-2005 ii FOREWORD 1. Use of this standard is not mandatory. Users should review the document and determine if it meets their purpose. 2. Comments (recommendations, additions, and deletions) that may be of use in improving this document should be addressed to: U.S. Department of Energy, Office of Health, c/o Paul Wambach, EH-53/270 Corporate Square Building, 1000 Independence Avenue, SW, Washington, DC 20585-0270. 3. This standard was developed through a consensus process by staff operating the DOE

148

DOE-STD-1035-93; Guide to Good Practices for Logkeeping  

Broader source: Energy.gov (indexed) [DOE]

5-93 5-93 March 1993 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR LOGKEEPING U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No. 1 DOE-STD-1035-93 December 1998 Guide to Good Practices for Logkeeping Page / Section Change p. 13 / Section 4.7 The references to DOE O 1324.5 and DOE O 1324.2A

149

DOE-STD-1121-2008 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

November 14, 2013 November 14, 2013 DOE-STD-1121-2008, Internal Dosimetry Change Notice 1 October 2013 This technical standard is created to provide a resource for those engaged in the science and practice of internal dosimetry within the DOE complex. This standard defines minimum levels of acceptable performance and provides basic procedural guidelines for evaluating the internal radiation equivalent and effective dose that may be received by radiation workers from intakes of radionuclides. This set of defined internal dosimetry performance criteria meets the requirements set forth in 10 CFR 835 for monitoring the workplace, for assessing internal radiation doses to workers at DOE facilities, and for recording and reporting requirements as they apply to internal dosimetry programs.

150

DOE-STD-1091-96; DOE Standard Firearms Safety  

Broader source: Energy.gov (indexed) [DOE]

1-96 1-96 February 1996 DOE STANDARD FIREARMS SAFETY U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE96009493 DOE-STD-1091-96 iii CONTENTS PARAGRAPH PAGE Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

151

DOE-STD-5507-2013 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

7-2013 7-2013 DOE-STD-5507-2013 April 04, 2013 Standard for Communicating Waste Characterization and DOT Hazard Classification Requirements for Low Specific Activity Materials and Surface Contaminated Objects Although other types of radioactive material and waste may be candidate LSA material or SCO, this standard focuses solely on low-level waste (LLW)3. The DOE ships various types of radioactive waste stemming from current and historical operations. Generally, candidate LSA material and SCO within the DOE complex are wastes generated from the clean-up and deactivation of World War II and Cold War era nuclear processing and weapons support operations. These waste matrices can be complex. The level of effort required to characterize waste varies based on the type and origin of waste

152

DOE-STD-1175-2013 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

5-2013 5-2013 DOE-STD-1175-2013 October 04, 2013 Senior Technical Safety Manager Functional Area Qualification Standard The STSM FAQS establishes common functional area competency requirements for all DOE STSMs who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE's defense nuclear facilities. The technical FAQS has been developed as a tool to assist DOE Program and Field offices in the development and implementation of the TQP in their organizations. For ease of transportability of qualifications between DOE elements, Program and Field offices are expected to use these technical FAQS competencies without modification or additions. Needed additional office/site/facility specific

153

DOE-STD-1168-2013 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

8-2013 8-2013 DOE-STD-1168-2013 October 11, 2013 Confinement Ventilation and Process Gas Treatment Functional Area Qualification Standard The Confinement Ventilation and Process Gas Treatment (CV&PGT) FAQS establishes common functional area competency requirements for all DOE CV&PGT personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE's defense nuclear facilities. The technical FAQS has been developed as a tool to assist DOE program and field offices in the development and implementation of the TQP in their organization. For ease of transportability of qualifications between DOE elements, program and field offices are expected to use this technical FAQS without modification.

154

DOE-STD-5507-2013 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

5507-2013 5507-2013 DOE-STD-5507-2013 April 04, 2013 Standard for Communicating Waste Characterization and DOT Hazard Classification Requirements for Low Specific Activity Materials and Surface Contaminated Objects Although other types of radioactive material and waste may be candidate LSA material or SCO, this standard focuses solely on low-level waste (LLW)3. The DOE ships various types of radioactive waste stemming from current and historical operations. Generally, candidate LSA material and SCO within the DOE complex are wastes generated from the clean-up and deactivation of World War II and Cold War era nuclear processing and weapons support operations. These waste matrices can be complex. The level of effort required to characterize waste varies based on the type and origin of waste

155

DOE-STD-1054-93 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

4-93 4-93 DOE-STD-1054-93 September 07, 1995 Guideline to Good Practices for Control and Calibration of Measuring and Test Equipment Canceled This guide is intended to assist facility maintenance operations in the review of existing and in developing new programs to ensure the accuracy and integrity of performance data derived from Plant process and control instrumentation is verified by controlled application of properly calibrated/certified measuring and test equipment (M&TE) having the appropriate precision, design accuracy, and durability for their intended use. Guideline to Good Practices for Control and Calibration of Measuring and Test Equipment More Documents & Publications CRAD, Measuring and Testing Equipment Assessment Plan Independent Oversight Review, Waste Treatment and Immobilization Plant -

156

DOE-STD-1174-2013 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

13 13 DOE-STD-1174-2013 November 6, 2013 Radiation Protection Functional Area Qualification Standard This technical FAQS has been developed as a tool to assist DOE program and field offices in the development and implementation of the TQP in their organization. For ease of transportability of qualifications between DOE elements, program and field offices must use this technical FAQS without modification. Satisfactory and documented attainment of the competency requirements contained in this technical FAQS ensures that personnel possess the minimum requisite competence to fulfill functional area duties and responsibilities common to the DOE complex. Additionally, needed office-/site-/facility-specific qualification standards, handled separately, supplement this technical FAQS and establish unique operational

157

Basis for seismic provisions of DOE-STD-1020  

SciTech Connect (OSTI)

DOE-STD-1020 provides for a graded approach for the seismic design and evaluation of DOE structures, systems, and components (SSC). Each SSC is assigned to a Performance Category (PC) with a performance description and an approximate annual probability of seismic-induced unacceptable performance, P{sub F}. The seismic annual probability performance goals for PC 1 through 4 for which specific seismic design and evaluation criteria are presented. DOE-STD-1020 also provides a seismic design and evaluation procedure applicable to achieve any seismic performance goal annual probability of unacceptable performance specified by the user. The desired seismic performance goal is achieved by defining the seismic hazard in terms of a site-specified design/evaluation response spectrum (called herein, the Design/Evaluation Basis Earthquake, DBE). Probabilistic seismic hazard estimates are used to establish the DBE. The resulting seismic hazard curves define the amplitude of the ground motion as a function of the annual probability of exceedance P{sub H} of the specified seismic hazard. Once the DBE is defined, the SSC is designed or evaluated for this DBE using adequately conservative deterministic acceptance criteria. To be adequately conservative, the acceptance criteria must introduce an additional reduction in the risk of unacceptable performance below the annual risk of exceeding the DBE. The ratio of the seismic hazard exceedance probability P{sub H} to the performance goal probability P{sub F} is defined herein as the risk reduction ratio. The required degree of conservatism in the deterministic acceptance criteria is a function of the specified risk reduction ratio.

Kennedy, R.C. [RPK Structural Mechanics Consulting, Yorba Linda, CA (United States); Short, S.A. [EQE International, Inc., San Francisco, CA (United States)

1994-04-01T23:59:59.000Z

158

DOE-STD-1128-98; Changes to DOE-STD-1128-98, "Guide for Occupational Radiological Protection in Plutonium Facilities"  

Broader source: Energy.gov (indexed) [DOE]

Changes to DOE-STD-1128-98, "Guide for Occupational Radiological Protection in Plutonium Changes to DOE-STD-1128-98, "Guide for Occupational Radiological Protection in Plutonium Facilities Section/Page Change Cover Change "Metric" to "Not Measurement Sensitive". Throughout the document Change "the DOE Radiological Control Manual (RCM)" to "the DOE standard DOE- STD-1098-99, Radiological Control (RCS)". Change "RCM" to "RCS". Replace (DOE, 1993c) with (DOE, 1998a). Replace (DOE, 19941) with (DOE, 1999b). Delete reference to DOE Order 5700C, Quality Assurance. Replace ANSI N13.6-1989 (ANSI, 1996) with ANSI/HPS N13.6 (ANSI, 1999a). Change "ANSI N323-1993 (ANSI, 1993)" to "ANSI N323a (ANSI, 1997b)". Change "DOE Order 420.1 (DOE, 1995c)" to "Order 420.1A (DOE, 2002a)".

159

Docket No. EERE-2010-BT-STD-0027 Energy Conservation Standards for  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

0-BT-STD-0027 Energy Conservation 0-BT-STD-0027 Energy Conservation Standards for Commercial and Industrial Electric Motors: Public Meeting and Availability of the Preliminary Technical Support Document 77 Fed. Reg. 43015 (July 23, 2012) Docket No. EERE-2010-BT-STD-0027 Energy Conservation Standards for Commercial and Industrial Electric Motors: Public Meeting and Availability of the Preliminary Technical Support Document 77 Fed. Reg. 43015 (July 23, 2012) This memorandum memorializes a communication involving members of the Motor Coalition (industry and energy advocates) in connection with this proceeding. Letter Motor Coalition re DOE Motors Rule 13May2013.pdf More Documents & Publications EERE-2010-BT-STD-0027 Ex Parte Letter NEMA Motor Training re DOE Motors Rule 15 July 2013. Docket No's EERE-2010-BT-TP-0044 and

160

DOE EPCA Commercial Refrigeration Standards - EERE-2010-BT-STD-0003 / (RIN)  

Broader source: Energy.gov (indexed) [DOE]

DOE EPCA Commercial Refrigeration Standards - EERE-2010-BT-STD-0003 DOE EPCA Commercial Refrigeration Standards - EERE-2010-BT-STD-0003 / (RIN) 1904-AC19 DOE EPCA Commercial Refrigeration Standards - EERE-2010-BT-STD-0003 / (RIN) 1904-AC19 In today's call we discussed the new CRE proposed standard and how ControlTec anti-sweat controls can help meet those standards without sacrificing equipment performance or integrity. We have a revolutionary product that is the only in the business that has built in Measurement & Verification (M&V). All other anti-sweat heater controls are old technology that has algorithm's to estimate store conditions inaccurately. EPCA Commercial Refrigeration Standards.pdf More Documents & Publications General Electric: ENERGY STAR Referral (PFSF5NFZ****) Docket No. EERE- 2008-BT-STD-0005, RIN 1904-AB57 Ex parte

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

DOE-STD-1185-2004; Nuclear Explosive Safety Study Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

STD-1185-2004 STD-1185-2004 August 2004 DOE STANDARD NUCLEAR EXPLOSIVE SAFETY STUDY FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE DOE-STD-1185-2004 i This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1185-2004

162

EERE-2010-BT-STD-0027 Ex Parte Letter NEMA Motor Training re DOE Motors  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

0-BT-STD-0027 Ex Parte Letter NEMA Motor Training re DOE 0-BT-STD-0027 Ex Parte Letter NEMA Motor Training re DOE Motors Rule 15 July 2013. EERE-2010-BT-STD-0027 Ex Parte Letter NEMA Motor Training re DOE Motors Rule 15 July 2013. This memorandum memorializes a communication between DOE staff and members of the NEMA Motor and Generator Section in connection with this proceeding. NEMA thanks the DOE for the opportunity to conduct training for DOE staff and its consultants on July 15th, 2013 which illustrated the different types of motors, motor construction theory and motor applications by type. It is our hope that better understanding of motor types and construction will assist the Department and its consultants with the discharge of their duties. EERE-2010-BT-STD-0027 Ex Parte Letter NEMA Motor Training re DOE Motors

163

EERE-2011-BT-STD-0005, Proposed EISA2007 Rule April 18th, 2013...  

Broader source: Energy.gov (indexed) [DOE]

18th, 2013 EERE-2011-BT-STD-0005, Proposed EISA2007 Rule April 18th, 2013 On Thursday April 18th, 2013 I had spoken with Michael Kido with respect to the following topics: a)...

164

EERE-2011-BT-STD-0005, Proposed EISA2007 Rule April 22, 2013...  

Broader source: Energy.gov (indexed) [DOE]

22, 2013 EERE-2011-BT-STD-0005, Proposed EISA2007 Rule April 22, 2013 REF: PHONE CALL DISCUSSION On Monday April 22nd, 2013 I had spoken with Mr. Jeremy Dommu with respect to the...

165

Docket No. EERE- 2008-BT-STD-0005, RIN 1904-AB57 Ex partecommunicatio...  

Broader source: Energy.gov (indexed) [DOE]

RIN 1904-AB57 Ex parte communication DOE Meeting of June 13, 2012 Docket No. EERE- 2008-BT-STD-0005, RIN 1904-AB57 Ex parte communication DOE Meeting of June 13, 2012...

166

Order Module--DOE STD-1098-2008, DOE STANDARD: RADIOLOGICAL CONTROL  

Broader source: Energy.gov [DOE]

"The radiological control program discussed in DOE-STD-1098-2008 goes beyond the scope of, and includes more details than, the documented radiation protection program (RPP) required by 10 CFR 835, ...

167

DOE Order Self Study Modules - DOE-STD-3009-94, Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facilities Documented Safety Analyses  

Broader source: Energy.gov (indexed) [DOE]

3009-94 3009-94 PREPARATION GUIDE FOR U.S. DEPARTMENT OF ENERGY NONREACTOR NUCLEAR FACILITY DOCUMENTED SAFETY ANALYSES DOE-STD-3009-94 Familiar Level June 2011 1 DOE-STD-3009-94 PREPARATION GUIDE FOR U.S. DEPARTMENT OF ENERGY NONREACTOR NUCLEAR FACILITY DOCUMENTED SAFETY ANALYSES FAMILIAR LEVEL _______________________________________________________________________________ OBJECTIVES Given the familiar level of this module and the resources listed below, you will be able to answer the following questions: 1. What are five general requirements for contractors who are responsible for a hazard category 1, 2, or 3 nuclear facility, as related to establishing a safety basis? 2. What actions must a contractor take when it is made aware of a potential inadequacy of

168

Over Batch Analysis for the LLNL DOE-STD-3013 Packaging System  

SciTech Connect (OSTI)

This document addresses the concern raised in the Savannah River Site (SRS) Acceptance Criteria about receiving an item that is over batched by 1.0 kg of fissile materials. This document shows that the occurrence of this is incredible. Some of the Department of Energy Standard 3013 (DOE-STD-3013) requirements are described in Section 2.1. The SRS requirement is discussed in Section 2.2. Section 2.3 describes the way fissile materials are handled in the Lawrence Livermore National Laboratory (LLNL) Plutonium Facility (B332). Based on the material handling discussed in Section 2.3, there are only three errors that could result in a shipping container being over batched. These are: incorrect measurement of the item, selecting the wrong item to package, and packaging two items into a single shipping container. The analysis in Section 3 shows that the first two events are incredible because of the controls that exist at LLNL. The third event is physically impossible. Therefore, it is incredible for an item to be shipped to SRS that is more than 1.0 kg of fissile materials over batched.

Riley, D C; Dodson, K

2009-07-02T23:59:59.000Z

169

DOE-STD-1183-2004; Nuclear Safety Specialist Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-1183-2004 April 2004 DOE STANDARD NUCLEAR SAFETY SPECIALIST FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1183-2004 ii This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1183-2004

170

DOE-STD-3003-2000; Backup Power Sources for DOE Facilities  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-3003-2000 January 2000 Superseding DOE-STD-3003-94 September 1994 DOE STANDARD BACKUP POWER SOURCES FOR DOE FACILITIES U.S. Department of Energy AREA EDCN Washington, D.C. 20858 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. METRIC This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-3003-2000 iii FOREWORD 1. This Standard is approved for use by the U.S. Department of Energy (DOE). This

171

DOE-STD-1182-2004; Civil/Structural Engineering Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-1182-2004 March 2004 DOE STANDARD CIVIL/STRUCTURAL ENGINEERING FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1182-2004 ii This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1182-2004

172

Facility Representatives, DOE-STD-1063-2011, Change Notice 1  

Broader source: Energy.gov (indexed) [DOE]

STD-1063-2011 STD-1063-2011 February 2011 Change Notice 1 March 2012 DOE STANDARD FACILITY REPRESENTATIVES U.S. Department of Energy AREA MGMT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1063-2011 ii Change Notice No. 1 March 2012 Table of Changes Available on the Department of Energy Technical Standards Program Web site at http://www.hss.doe.gov/nuclearsafety/ns/techstds/ Page/Section Change Foreword Update contact information and internet address. Page 20/ Section 5.4.8 Edited the discussion of Interim Qualification to match the language in the Definition section and deleted a redundant word. Page 20/ Section 5.4.10 Clarified qualification requirements for

173

DOE-STD-1155-2002; Transportation and Traffic Management Functional Area Qualification  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-1155-2002 September 2002 DOE STANDARD TRANSPORTATION AND TRAFFIC MANAGEMENT FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1155-2002 This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1155-2002 i APPROVAL

174

DOE-STD-1138-2000; Industrial Hygiene Funcational Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

38-2000 38-2000 July 2000 DOE STANDARD INDUSTRIAL HYGIENE FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1138-2000 iii APPROVAL DOE-STD-1138-2000 iv INTENTIONALLY BLANK DOE-STD-1138-2000 v TABLE OF CONTENTS

175

DOE-STD-3013-2004; Stabilization, Packaging, and Storage of Plutonium-Bearing Materials  

Broader source: Energy.gov (indexed) [DOE]

MEASUREMENT SENSITIVE DOE-STD-3013-2004 April 2004 Superseding DOE-STD-3013-2000 September 2000 DOE STANDARD STABILIZATION, PACKAGING, AND STORAGE OF PLUTONIUM-BEARING MATERIALS U.S. Department of Energy AREA PACK Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services. U.S. Department of Energy. (800) 473-4375, fax: (301) 903-9823. Available to the public from the U. S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605- 6000. DOE-STD-3013-2004 iii

176

DOE-STD-1170-2003; Electrical Systems Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

MEASUREMENT MEASUREMENT SENSITIVE DOE-STD-1170-2003 December 2003 DOE STANDARD ELECTRICAL SYSTEMS FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1170-2003 This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1170-2003

177

DOE-STD-1181-2004; Facility Maintenance Management Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-1181-2004 March 2004 DOE STANDARD FACILITY MAINTENANCE MANAGEMENT FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1181-2004 i This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1181-2004 ii

178

DOE-STD-1077-94; DOE Standard Training Accreditation Program Standard: Requirements and Guidelines  

Broader source: Energy.gov (indexed) [DOE]

7-94 7-94 August 1994 Supercedes DOE-STD-0101T, TAP-1, and DOE-STD-0103T, TAP-3 DOE STANDARD TRAINING ACCREDITATION PROGRAM STANDARD: REQUIREMENTS AND GUIDELINES U.S. Department of Energy Washington, D.C. 20585 FSC 6910 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE94018723 DOE-STD-1077-94 FOREWORD The Training Accreditation Program was established by the Department of Energy

179

Docket No. EERE-2008-BT-STD-0005. RIN 1904-AB57 | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2008-BT-STD-0005. RIN 1904-AB57 2008-BT-STD-0005. RIN 1904-AB57 Docket No. EERE-2008-BT-STD-0005. RIN 1904-AB57 This memorandum for the record provides a summary of a February 13, 2013 meeting with U.S. Department of Energy staff concerning DOE's proposed rulemaking regarding amended energy conservation standards for Class A external power supplies (EPSs) and new energy conservation standards for non-Class A EPSs and battery chargers. CEA Ex Parte Discussion_02212013.pdf More Documents & Publications Request for Information on Evaluating New Products for the Battery Chargers and External Power Supply Rulemaking - Ex Parte Communication HP Ex Parte Memo on Proposed Rulemaking for Battery Chargers and External Power Supplies HP Ex Parte Memo on Proposed Rulemaking for Battery Chargers and External

180

"Order Module--DOE-STD-3009-94, PREPARATION GUIDE FOR U.S. DEPARTMENT OF  

Broader source: Energy.gov (indexed) [DOE]

"Order Module--DOE-STD-3009-94, PREPARATION GUIDE FOR U.S. "Order Module--DOE-STD-3009-94, PREPARATION GUIDE FOR U.S. DEPARTMENT OF ENERGY NONREACTOR NUCLEAR FACILITY "Order Module--DOE-STD-3009-94, PREPARATION GUIDE FOR U.S. DEPARTMENT OF ENERGY NONREACTOR NUCLEAR FACILITY "The familiar level of this module is divided into three sections. The first section is an introduction to DOE-STD-3009-94. In the second section, we will introduce the 17 chapters of a documented safety analysis (DSA). The third section covers the evaluation guideline that appears in appendices 1-5 of the standard. We have provided several examples and practices throughout the module to help familiarize you with the material. The practice will also help prepare you for the criterion test." DOE Order Self Study Modules - DOE-STD-3009-94, Preparation Guide for U.S.

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

DOE-STD-1032-92 CN 1; Guide to Good Practices for Operations Organization and Administration  

Broader source: Energy.gov (indexed) [DOE]

2-92 2-92 December 1992 CHANGE NOTICE NO.1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR OPERATIONS ORGANIZATION AND ADMINISTRATION U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No.1 DOE-STD-1032-92 December 1998 Guide to Good Practices for Operations Organization and Administration

182

DOE-STD-1072-94; DOE Standard Guideline to Good Practices for Facility Condition Inspections at DOE Nuclear Facilities  

Broader source: Energy.gov (indexed) [DOE]

2-94 2-94 June 1994 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR FACILITY CONDITION INSPECTIONS AT DOE NUCLEAR FACILITIES U.S. Department of Energy Washington, D.C. 20585 AREA MNTY DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE94014948 DOE-STD-1072-94 iii FOREWORD The purpose of the Guideline to Good Practices for Facility Condition Inspections

183

DOE-STD-101-92; Compilation of Nuclear Safety Criteria Potential Application to DOE Nonreactor Facilities  

Broader source: Energy.gov (indexed) [DOE]

-1O1-92 -1O1-92 DE92 011016 COMPILATION OF NUCLEAR SAFETY CRITERIA POTENTIAL APPLICATION TO DOE NONREACTOR FACILITIES Published: March 1992 U.S. Department of Energy Office of Nuclear Energy Office of Nuclear Safety Policy and Standards Washington,DC 20585 This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Informa- tion, P.O. Box 62, Oak Ridge, TN 37831; prices available from (423) 576-8401. Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal Rd., Springfield, VA 22161. Order No. DE92011016 DOE-STD-101-92 CONTENTS FOREWORD 1. INTRODUCTION 1.1 Purpose 1.2 Sources of Criteria and Format 1.3 Safety Analysis Report Criteria

184

"Order Module--DOE-STD-3009-94, PREPARATION GUIDE FOR U.S. DEPARTMENT OF ENERGY NONREACTOR NUCLEAR FACILITY  

Broader source: Energy.gov [DOE]

"The familiar level of this module is divided into three sections. The first section is an introduction to DOE-STD-3009-94. In the second section, we will introduce the 17 chapters of a documented...

185

DOE-STD-1180-2004; Construction Management Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

MEASUREMENT MEASUREMENT SENSITIVE DOE-STD-1180-2004 March 2004 DOE STANDARD CONSTRUCTION MANAGEMENT FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1180-2004 i This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161;

186

DOE-NE-STD-1004-92; Root Cause Analysis Guidance Document  

Broader source: Energy.gov (indexed) [DOE]

NE-STD-1004-92 NE-STD-1004-92 DOE GUIDELINE ROOT CAUSE ANALYSIS GUIDANCE DOCUMENT February 1992 U.S. Department of Energy Office of Nuclear Energy Office of Nuclear Safety Policy and Standards Washington, D.C. 20585 ii ABSTRACT DOE Order 5000.3A, "Occurrence Reporting and Processing of Operations Information," investigation and reporting of occurrences (including the performance of root cause analysis) requires the and the selection, implementation, and follow-up of corrective actions. The level of effort expended should be based on the significance attached to the occurrence. Most off-normal occurrences need only a scaled- down effort while most emergency occurrences should be investigated using one or more of the formal analytical models. A discussion of methodologies, instructions, and worksheets in this document guides

187

DOE-STD-1073-2003; DOE Technical Stadnard Configuration Management  

Broader source: Energy.gov (indexed) [DOE]

NOT MEASUREMENT SENSITIVE DOE-STD-1073-2003 October 2003 DOE STANDARD Configuration Management U.S. Department of Energy AREA CMAN Washington, D.C. 20585 DISTRIBUTION STATEMENT: Approved for public release; further dissemination unlimited. DOE-STD-1073-2003 Configuration Management This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax (301) 903-9823 or on the web at http://tis.eh.doe.gov/techstds/. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000.

188

DOE-STD-1175-2003; Senior Technical Safety Manager Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

MEASUREMENT DOE-STD-1175-2003 December 2003 DOE STANDARD SENIOR TECHNICAL SAFETY MANAGER FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1175-2003 ii This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161, (703) 605-6000.

189

DOE-STD-3006-95; DOE Standard Planning and Conduct of Operational Readiness Reviews (ORR)  

Broader source: Energy.gov (indexed) [DOE]

3006-95 3006-95 November 1995 SUPERSEDING DOE-STD-3006-93 November 1993 DOE STANDARD PLANNING AND CONDUCT OF OPERATIONAL READINESS REVIEWS (ORR) U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. DOE-STD-3006-95 i PLANNING AND CONDUCT OF OPERATIONAL READINESS REVIEWS (ORR) FOREWORD 1. DOE 0 425.1 establishes the requirement to conduct Operational Readiness Reviews

190

DOE-STD-1030-95; DOE Standard Guide to Good Practices For Lockouts and Tagouts  

Broader source: Energy.gov (indexed) [DOE]

1030-96 1030-96 May 1996 Supercedes DOE-STD-1030-92 DOE STANDARD GUIDE TO GOOD PRACTICES FOR LOCKOUTS AND TAGOUTS U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE96009465 DOE-STD-1030-96 iii FOREWORD The purpose of this Guide to Good Practices is to provide Department of Energy (DOE) contractors with information that can be used to validate and/or modify existing programs

191

DOE-EM-STD-5502-94; DOE Limited Standard Hazard Baseline Documentation  

Broader source: Energy.gov (indexed) [DOE]

NOT MEASUREMENT SENSITIVE DOE-EM-STD-5502-94 August 1994 DOE LIMITED STANDARD HAZARD BASELINE DOCUMENTATION U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE94016623 DOE-EM-STD-5502-94

192

DOE-STD-1172-2003; Safety Software Quality Assurance Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

72-2003 72-2003 December 2003 DOE STANDARD SAFETY SOFTWARE QUALITY ASSURANCE FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1172-2003 This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1172-2003

193

DOE-STD-1090-99; DOE Standard Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

TS TS INCH-POUND DOE-STD-1090-99 March 1999 Superseding DOE-STD-1090-96 September 1996 DOE STANDARD HOISTING AND RIGGING (Formerly Hoisting and Rigging Manual) U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE STANDARD HOISTING AND RIGGING (Formerly Hoisting and Rigging Manual) Summary of Changes as of March 1999

194

DOE-STD-1173-2003; Criticality Safety Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

73-2003 73-2003 December 2003 DOE STANDARD CRITICALITY SAFETY FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE DOE-STD-1173-2003 ii This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1173-2003

195

DOE-STD-1023-95; Natural Phenomena Hazards Assessment Criteria  

Broader source: Energy.gov (indexed) [DOE]

3-95 3-95 March 1995 Change Notice No. 1 January 1996 Reaffirmed with Errata April 2002 DOE STANDARD NATURAL PHENOMENA HAZARDS ASSESSMENT CRITERIA U.S. Department of Energy AREA FACR Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Environment Safety and Health Technical Information Services, U.S. Department of Energy, (800) 473-4376, Fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. DOE-STD-1023-95 i ERRATA FOR DOE-STD-1023-95 S FOREWORD RE-WRITTEN S ADDED REFERENCE TO 10 CFR PART 830, SSHAC (1997) AND UCRL-ID-140922

196

DOE-STD-7501-99; The DOE Corporate Lessons Learned Program  

Broader source: Energy.gov (indexed) [DOE]

7501-99 7501-99 December 1999 Superseding DOE-STD-7501-95 Including Change Notice No. 1 September 1997 DOE STANDARD THE DOE CORPORATE LESSONS LEARNED PROGRAM U.S. Department of Energy AREA MGMT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. DOE-STD-7501-99 iii FOREWORD This Department of Energy Technical Standard is approved for use by all DOE Components and

197

DOE-STD-1177-2004; Emergency Management Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-1177-2004 January 2004 DOE STANDARD EMERGENCY MANAGEMENT FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE DOE-STD-1177-2004 i This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161;

198

DOE-STD-1171-2003; Safeguards and Security Functional Area Standard  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-1171-2003 December 2003 DOE STANDARD SAFEGUARDS AND SECURITY FUNCTIONAL AREA STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1171-2003 This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000.

199

DOE-STD-1167-2003; Respiratory Acceptance Program for Supplied-Air Suits  

Broader source: Energy.gov (indexed) [DOE]

NOT MEASUREMENT SENSITIVE DOE-STD-1167-2003 OCTOBER 2003 DOE STANDARD THE DEPARTMENT OF ENERGY RESPIRATORY ACCEPTANCE PROGRAM FOR SUPPLIED-AIR SUITS U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. ii DOE-STD-1167-2003 FOREWORD This non-mandatory Technical Standard provides the Department of Energy (DOE) and contractor

200

DOE-STD-1166-2003; Deactivation and Decommissioning Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

NOT MEASUREMENT SENSITIVE DOE-STD-1166-2003 September 2003 DOE STANDARD DEACTIVATION AND DECOMMISSIONING FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1166-2003 This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161;

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

DOE-STD-1156-2002; Environmental Compliance Function Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

6-2002 6-2002 October 2002 DOE STANDARD ENVIRONMENTAL COMPLIANCE FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE DOE-STD-1156-2002 This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1156-2002

202

DOE-STD-1178-2004; Technical Program Manager Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

78-2004 78-2004 February 2004 DOE STANDARD TECHNICAL PROGRAM MANAGER FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE DOE-STD-1178-2004 i This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1178-2004

203

DOE-STD-3020-97; DOE Standard Specification for HEPA Filters Used By DOE Contractors  

Broader source: Energy.gov (indexed) [DOE]

POUND POUND DOE-STD-3020-97 January 1997 Supersedes DOE NE F3-45 January 1987 DOE STANDARD SPECIFICATION FOR HEPA FILTERS USED BY DOE CONTRACTORS U.S. Department of Energy FSC 6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. DE97000782 DOE-STD-3020-97 iii FOREWORD This Department of Energy standard supersedes DOE NE F3-45 and is approved for use by

204

DOE-STD-1179-2004; Technical Training Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

9-2004 9-2004 February 2004 DOE STANDARD TECHNICAL TRAINING FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1179-2004 i This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1179-2004 ii APPROVAL The Federal Technical Capability Panel consists of senior U.S. Department of Energy managers

205

DOE-STD-1070-94; DOE Standard Guidelines for Evalation of Nuclear Facility Training Programs  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-1070-94 June 1994 DOE STANDARD GUIDELINES FOR EVALUATION OF NUCLEAR FACILITY TRAINING PROGRAMS U.S. Department of Energy FSC-6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615)576-8401. Available to the public from the U. S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA. 22161; (703)487-4650. Order No. DE94015536 DOE-STD-1070-94 iii FOREWORD The Department of Energy (DOE) Guidelines for Evaluation of Nuclear Facility Training

206

DOE Handbook: Supplementary guidance and design experience for the fusion safety standards DOE-STD-6002-96 and DOE-STD-6003-96  

SciTech Connect (OSTI)

Two standards have been developed that pertain to the safety of fusion facilities. These are DOE- STD-6002-96, Safety of Magnetic Fusion Facilities: Requirements, and DOE-STD-6003-96, Safety of Magnetic Fusion Facilities: Guidance. The first of these standards identifies requirements that subscribers to that standard must meet to achieve safety in fusion facilities. The second standard contains guidance to assist in meeting the requirements identified in the first This handbook provides additional documentation on good operations and design practices as well as lessons learned from the experiences of designers and operators of previous fusion facilities and related systems. It is intended to capture the experience gained in the various fields and pass it on to designers of future fusion facilities as a means of enhancing success and safety. The sections of this document are presented according to the physical location of the major systems of a fusion facility, beginning with the vacuum vessel and proceeding to those systems and components outside the vacuum vessel (the "Ex-vessel Systems"). The last section describes administrative procedures that cannot be localized to specific components. It has been tacitly assumed that the general structure of the fusion facilities addressed is that of a tokamak though the same principles would apply to other magnetic confinement options.

none,

1999-01-01T23:59:59.000Z

207

DOE-STD-1020 Natural Phenomena Hazards Design and Evaluation...  

National Nuclear Security Administration (NNSA)

racks 2 3 -* Electrical cabinets and other equipment 3 4 5** Liquid containing metal tanks Impulsive mode 2 3 4 Sloshing mode 0.5 0.5 0.5 * Should not be stressed to Response...

208

Ex Parte Communication, Docket EERE-2012-BT-STD-0022  

Broader source: Energy.gov [DOE]

On May 2, representatives from PJM Interconnection, L.L.C., the National Rural Electric Cooperatives Association, the Edison Electric Institute and the American Public Power Association held a...

209

The Biology of Chameleons Edited by Krystal a. tollEy and anthony hErrEl  

E-Print Network [OSTI]

Anthony Herrel 3.1 Neurophysiology 57 3.2 Muscle Physiology 59 3.3 Metabolism, Salt, and Water Balance 60 5 4 3 2 1 The paper used in this publication meets the minimum requirements of ansi/niso Z39

Anderson, Christopher V.

210

DOE-STD-1176-2004; Chemical Processing Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

76-2004 76-2004 January 2004 DOE STANDARD CHEMICAL PROCESSING FUNCTIONAL AREA QUALIFICATION STANDARD DOE Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited NOT MEASUREMENT SENSITIVE DOE-STD-1176-2004 i This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA

211

Microsoft Word - ComEd Comments - NOPR DOE Docket EE-2010-BT-STD-0048 and RIN 1904-AC04 Supplemental NOPR Analysis.doc  

Broader source: Energy.gov (indexed) [DOE]

June 29, 2012 June 29, 2012 To: Ms. Brenda Edwards U.S. Department of Energy, Building Technologies Program Mailstop EE-2J, 1000 Independence Avenue Washington, DC 20585-0121 Phone: (202) 586-2945 cc: Michelle Blaise (VP, ComEd Engineering & Project Management) Joseph Watson (Director, Federal Government Affairs) Martin Rave (Prin Engineer, ComEd Distribution Standards) From: Peter Tyschenko (Manager, ComEd Distribution Standards) Two Lincoln Centre Oakbrook Terrace, IL 60181-4260 Phone: (630) 576-6998 Subject: Supplemental Post-Notice of Proposed Rulemaking Analyses for Distribution Transformers, Docket Number EE-2010-BT-STD-0048, and Regulatory Identification Number (RIN) 1904-AC04 Dear Ms. Edwards, Commonwealth Edison Company (ComEd) appreciates the opportunity to submit additional

212

DOE-STD-5503-94; EM Health and Safety Plan Guidelines  

Broader source: Energy.gov (indexed) [DOE]

5503-94 5503-94 December 1994 DOE STANDARD EM HEALTH AND SAFETY PLAN GUIDELINES U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE95004760 DOE-EM-STD-5503-94 i TABLE OF CONTENTS LIST OF FIGURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii LIST OF TABLES . . . . . . . . . . . . . . . . . . .

213

DOE-STD-1158-2002; Self-Assessment Standard for DOE Contractor Criticality Safety Programs  

Broader source: Energy.gov (indexed) [DOE]

02 02 November 2002 DOE STANDARD SELF-ASSESSMENT STANDARD FOR DOE CONTRACTOR CRITICALITY SAFETY PROGRAMS U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1158-2202 iii FOREWARD 1. This Department of Energy standard is approved for use by all DOE Components and their

214

DOE-STD-4001-2000; Design Criteria Standard for Electronic Records Management Software Applications  

Broader source: Energy.gov (indexed) [DOE]

4001-2000 4001-2000 March 2000 DOE STANDARD DESIGN CRITERIA STANDARD FOR ELECTRONIC RECORDS MANAGEMENT SOFTWARE APPLICATIONS U.S. Department of Energy AREA INFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-4001-2000 iii FOREWORD This Department of Energy Standard is approved for use by all DOE Components and their Contractors. The Heads of the DOE Components may issue supplementary instructions when

215

DOE-STD-1151-2002; Facility Representative Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

1151-2002 1151-2002 April 2002 DOE STANDARD FACILITY REPRESENTATIVE FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1151-2002 iii APPROVAL The Federal Technical Capability Panel consists of senior Department of Energy managers

216

DOE-STD-1159-2003; DOE Standard Waste Management Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

59-2003 59-2003 January 2003 DOE STANDARD WASTE MANAGEMENT FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1159-2003 iii APPROVAL The Federal Technical Capability Panel consists of senior Department of Energy managers

217

DOE-STD-1174-2003; Radiation Protection Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

4-2003 4-2003 December 2003 DOE STANDARD RADIATION PROTECTION FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. ii This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1174-2003 iii APPROVAL The Federal Technical Capability Panel consists of senior U.S. Department of Energy managers

218

DOE-STD-3022-98; DOE Standard DOE HEPA Filter Test Program  

Broader source: Energy.gov (indexed) [DOE]

22-98 22-98 May 1998 Superseding DOE NE F 3-42 January 1987 DOE STANDARD DOE HEPA FILTER TEST PROGRAM U.S. Department of Energy FSC 4460 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Order No. DE98001294 DOE-STD-3022-98 iii FOREWORD 1. This Department of Energy (DOE) Standard is approved for use by all DOE components and contractors.

219

DOE-STD-1160-2003; Occupational Safety Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

03 03 March 2003 DOE STANDARD OCCUPATIONAL SAFETY FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1160-2003 iii APPROVAL The Federal Technical Capability Panel consists of senior U.S. Department of Energy managers

220

DOE-STD-1083-95; DOE Standard Requesting and Granting Exemptions to Nuclear Safety Rules  

Broader source: Energy.gov (indexed) [DOE]

3-95 3-95 February 1995 DOE STANDARD REQUESTING AND GRANTING EXEMPTIONS TO NUCLEAR SAFETY RULES U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE95007451 DOE-STD-1083-95 iii FOREWORD 1. This Department of Energy (DOE) standard has been prepared by the Office of Environment, Safety and Health with the assistance of Hank George of Synergy Consultants and

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

DOE-STD-3025-99; DOE Standard Quality Assurance Inspection and Testing of HEPA Filters  

Broader source: Energy.gov (indexed) [DOE]

5-99 5-99 February 1999 Superseding DOE NE F 3-43 February 1990 DOE STANDARD QUALITY ASSURANCE INSPECTION AND TESTING OF HEPA FILTERS U.S. Department of Energy FSC 4460 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-3025-99 iii FOREWORD This Department of Energy standard supercedes DOE NE F 3-43 and is approved for use by all DOE

222

DOE-STD-1038-93; Guide to Good Practices for Operations Turnover  

Broader source: Energy.gov (indexed) [DOE]

8-93 8-93 June 1993 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR OPERATIONS TURNOVER U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No.1 DOE-STD-1038-93 December 1998 Guide to Good Practices for Operations Turnover Page/Section Change Concluding Material The Preparing Activity was changed from NE-

223

DOE-STD-1161-2003; Mechanical Systems Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

1-2003 1-2003 June 2003 DOE STANDARD MECHANICAL SYSTEMS FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1161-2003 iii APPROVAL The Federal Technical Capability Panel consists of senior Department of Energy managers responsible

224

DOE-STD-1135-99 Guidance for Nuclear Criticality Safety Engineer Training and Qualification  

Broader source: Energy.gov (indexed) [DOE]

5-99 5-99 September 1999 DOE STANDARD GUIDANCE FOR NUCLEAR CRITICALITY SAFETY ENGINEER TRAINING AND QUALIFICATION U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. TS This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1135-99 iii FOREWORD This Department of Energy Standard is required for use by all DOE Contractor criticality safety personnel. It contains guidelines that should be followed for NCS training and qualification

225

DOE-STD-3026-99; DOE Standard Filter Test Facility Quality Program Plan  

Broader source: Energy.gov (indexed) [DOE]

6-99 6-99 February 1999 Superseding DOE NE F 3-44 July 1986 DOE STANDARD FILTER TEST FACILITY QUALITY PROGRAM PLAN U.S. Department of Energy FSC 4460 Washington, D.C. 20585 DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-3026-99 iii FOREWORD This Department of Energy standard supercedes DOE NE F 3-44 and is approved for use by all DOE components and their contractors.

226

DOE-STD-1075-94; DOE Standard Guide for Operational Configuration Management Program  

Broader source: Energy.gov (indexed) [DOE]

5-94 5-94 July 1994 DOE STANDARD STANDARD FOR DEVELOPING AND ISSUING DOE SAFETY GUIDES AND IMPLEMENTATION GUIDES U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE94018438 DOE-STD-1075-94 iii FOREWORD 1. This Department of Energy (DOE) standard was prepared by the Office of Environment, Safety and Health with the assistance of James E. Konklin of

227

DOE-STD-1134-99 Review Guide for Criticality Safety Evaluations  

Broader source: Energy.gov (indexed) [DOE]

4-99 4-99 September 1999 DOE STANDARD REVIEW GUIDE FOR CRITICALITY SAFETY EVALUATIONS U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. TS This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1134-99 iii FOREWORD This Department of Energy Standard is approved for use by all DOE criticality safety personnel. It contains guidelines that should be followed when reviewing Criticality Safety Evaluations that

228

DOE-STD-3024-98; DOE Standard Content of System Design Descriptions  

Broader source: Energy.gov (indexed) [DOE]

4-98 4-98 October 1998 DOE STANDARD CONTENT OF SYSTEM DESIGN DESCRIPTIONS U.S. Department of Energy AREA EDCO Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-3024-98 Page iii FOREWORD This Department of Energy (DOE) standard is approved for use by all Departmental organizational units and contractors of the Department. A System Design Description (SDD) describes the requirements and features of a system. This standard

229

DOE-STD-3014-96; DOE Standard Accident Analysis For Aircraft Crash Into Hazardous Facilities  

Broader source: Energy.gov (indexed) [DOE]

DOE STANDARD DOE STANDARD October 1 996 Reaffirmation May 2006 ACCIDENT CRASH INTO ANALYSIS HAZARDOUS FACILITIES U.S. Department of Energy Washington, DC 20585 AREA SAFT DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. FOR AIRCRAFT This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE97000162 DOE-STD-3014-96 iii TABLE OF CONTENTS PARAGRAPH PAGE FOREWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

230

DOE-STD-1150-2002; Quality Assurance Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

NOT MEASUREMENT SENSITIVE DOE-STD-1150-2002 April 2002 DOE STANDARD QUALITY ASSURANCE FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Department-Wide Quality Assurance Functional Area Qualification Standard

231

DOE-STD-1043-93 CN-1; Guide to Good Practices for Operator Aid Postings  

Broader source: Energy.gov (indexed) [DOE]

3-93 3-93 June 1993 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR OPERATOR AID POSTINGS U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No. 1 DOE-STD-1043-93 December 1998 Guide to Good Practices for Operator Aid Postings Page / Section Change Concluding Material

232

DOE-STD-1034-93; Guide to Good Practices for Timely Orders to Operators  

Broader source: Energy.gov (indexed) [DOE]

4-93 4-93 March 1993 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR TIMELY ORDERS TO OPERATORS U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No. 1 DOE-STD-1034-93 December 1998 Guide to Good Practices for Timely Orders to Operators Page / Section Change p. 10 / Section 4.3

233

DOE-STD-1165-2003; Aviation Manager Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

5-2003 5-2003 September 2003 DOE STANDARD AVIATION MANAGER FUNCTIONAL AREA QUALIFICATION STANDARD DOE Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE DOE-STD-1165-2003 ii This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000.

234

DOE-STD-1073-93-Pt. 1; DOE Standard Guide for Operational Configuration Management Program  

Broader source: Energy.gov (indexed) [DOE]

II-A-1 II-A-1 DOE-STD-1073-93 APPENDIX lI-A DESIGN CONTROL Design controls are the measures established to assure that the design process activities are carried out in a planned, orderly, correct, and documented manner. These controls assure the quality of the design requirements and design basis obtained through the design process. Design controls are constraints to the design process that ensure the following results: the correct identification of design inputs and constraints; the design analysis and calculations are complete and correct; and the design outputs are complete and consistent with the design basis. Design controls are implemented through procedures. DOE 5700.6C, Quality Assurance, defines DOE design control requirements. ANSI/ASME NQA-1, Quality Assurance Requirements for Nuclear Power Plants, provides additional guidance on design

235

DOE-STD-1164-2003; Aviation Safety Officer Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

4-2003 4-2003 September 2003 DOE STANDARD AVIATION SAFETY OFFICER FUNCTIONAL AREA QUALIFICATION STANDARD DOE Facilities Technical Personnel U.S. Department of Energy AREA-TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE DOE-STD-1164-2003 This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000.

236

Radiological hazard classification of DOE facilities by DOE STD-1027-92: LANL nuclear facility list  

SciTech Connect (OSTI)

Los Alamos facilities containing significant radiological hazards have been reclassified according to DOE-SID 1027-92, a recently issued guide for hazard classification. DOE-STD 1027-92 was provided in support of DOE Order 5480.23 to identify which facilities would be governed under DOE 5480.23 requirements; these would presumably be called nuclear facilities. This new classification has affected the original list of 18 LANL nuclear facilities by increasing it to 39. It has also lowered the classification of TA-55-4, the plutonium processing facility containing highest intrinsic hazard at LANL, from the highest classification to an intermediate classification. This presentation addresses the impact of these changes in the nuclear facility list in the areas of radiological health, safety analysis documentation, and risk management.

Elder, J.C.

1993-05-01T23:59:59.000Z

237

Radiological hazard classification of DOE facilities by DOE STD-1027-92: LANL nuclear facility list  

SciTech Connect (OSTI)

Los Alamos facilities containing significant radiological hazards have been reclassified according to DOE-SID 1027-92, a recently issued guide for hazard classification. DOE-STD 1027-92 was provided in support of DOE Order 5480.23 to identify which facilities would be governed under DOE 5480.23 requirements; these would presumably be called nuclear facilities. This new classification has affected the original list of 18 LANL nuclear facilities by increasing it to 39. It has also lowered the classification of TA-55-4, the plutonium processing facility containing highest intrinsic hazard at LANL, from the highest classification to an intermediate classification. This presentation addresses the impact of these changes in the nuclear facility list in the areas of radiological health, safety analysis documentation, and risk management.

Elder, J.C.

1993-01-01T23:59:59.000Z

238

DOE-STD-1088-95; DOE Standard Fire Protection For Relocatable Structures  

Broader source: Energy.gov (indexed) [DOE]

8-95 8-95 JUNE 1995 DOE STANDARD FIRE PROTECTION FOR RELOCATABLE STRUCTURES U.S. Department of Energy AREA GDRQ Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE95014751 DOE-STD-1088-95 iii TABLE OF CONTENTS PARAGRAPH PAGE FOREWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v 1. SCOPE . . . . . . . . . . . .

239

DOE-STD-1037-93; Guide to Good Practices for Operations Aspects of Unique Processes  

Broader source: Energy.gov (indexed) [DOE]

7-93 7-93 June 1993 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR OPERATIONS ASPECTS OF UNIQUE PROCESSES U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No. 1 DOE-STD-1037-93 December 1998 Guide to Good Practices for Operations Aspects of Unique Processes Page / Section

240

DOE-STD-1149-2002; Safety and Health Program for DOE Construction Projects  

Broader source: Energy.gov (indexed) [DOE]

49-2002 49-2002 February 2002 DOE STANDARD SAFETY AND HEALTH PROGRAM FOR DOE CONSTRUCTION PROJECTS U.S. Department of Energy AREA OCSH Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1149-2002 iii TABLE OF CONTENTS PARAGRAPH PAGE FOREWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v 1.0 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . .

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

DOE-STD-1029-92; Writer's Guide for Technical Procedures  

Broader source: Energy.gov (indexed) [DOE]

29-92 29-92 December 1992 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD WRITER' S GUIDE FOR TECHNICAL PROCEDURES U.S. Department of Energy AREA HFAC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No. 1 DOE-STD-1029-92 December 1998 Writer' s Guide for Technical Procedures Page / Section Change p. 1 / Introduction / third paragraph

242

DOE-STD-6002-96; DOE Standard Safety of Magnetic Fusion Facilities: Requirements  

Broader source: Energy.gov (indexed) [DOE]

6002-96 6002-96 May 1996 DOE STANDARD SAFETY OF MAGNETIC FUSION FACILITIES: REQUIREMENTS U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE96009495 DOE-STD-6002-96 iii TABLE OF CONTENTS Page FOREWORD....................................................................................................................... v

243

DOE-HDBK-6004-99; Supplementary Guidance and Design Experience for the Fusion Safety Standards DOE-STD-6002-96 and DOE-STD-6003-96  

Broader source: Energy.gov (indexed) [DOE]

SENSITIVE DOE-HDBK-6004-99 January 1999 DOE HANDBOOK SUPPLEMENTARY GUIDANCE AND DESIGN EXPERIENCE FOR THE FUSION SAFETY STANDARDS DOE-STD-6002-96 AND DOE-STD-6003-96 U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-HDBK-6004-99 iii FOREWORD Two standards have been developed that pertain to the safety of fusion facilities. These are DOE-

244

Order Module--DOE-STD-1104-2009, REVIEW AND APPROVAL OF NUCLEAR FACILITY SAFETY BASIS AND SAFETY DESIGN BASIS DOCUMENTS  

Broader source: Energy.gov [DOE]

The familiar level of this module is divided into two sections that are intended to provide only an overview of the material contained in DOE-STD-1104-2009, which should be consulted for complete...

245

DOE-STD-1063-97; DOE Standard Establishing and Maintaining a Facility Representative Program at DOE Facilities  

Broader source: Energy.gov (indexed) [DOE]

3-97 3-97 October 1997 Supersedes DOE-STD-1063-93 DOE STANDARD ESTABLISHING AND MAINTAINING A FACILITY REPRESENTATIVE PROGRAM AT DOE FACILITIES U.S. Department of Energy AREA FACR Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE98001286 DOE-STD-1063-97 iii FOREWORD 1. This Department of Energy standard is approved for use by all DOE Components.

246

DOE-STD-1136-2004; Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-1136-2004 December 2004 DOE STANDARD GUIDE OF GOOD PRACTICES FOR OCCUPATIONAL RADIOLOGICAL PROTECTION IN URANIUM FACILITIES U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U. S. Department of Energy, (800) 473-4373, fax (301) 903-9823. Available to the public from the U. S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-600 DOE-STD-1136-2004 Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities

247

DOE-STD-1153-2002; A Graded Approach for Evaluating Radiation Doses to Aquatic and Terrestrial Biota  

Broader source: Energy.gov (indexed) [DOE]

1 1 PRINCIPLES AND APPLICATION MODULE 1: PRINCIPLES AND APPLICATION DOE-STD-1153-2002 INTENTIONALLY BLANK DOE-STD-1153-2002 M1-1 1 Introduction The U.S. Department of Energy (DOE) is accountable to Congress and the public for the safe conduct of its activities, including facility operation, waste management and disposal activities, and remediation of environmental contamination. These routine activities may result in releases of radionuclides to the air and water, accumulation of radionuclides in soil and sediment, and the potential for plants, animals, and members of the public to be exposed to radiation. DOE Order 5400.5, "Radiation Protection of the Public and the Environment" (1990a), lists the environmental radiation protection requirements that DOE and DOE- contractor employees must meet to protect aquatic animals. In addition, dose limits below

248

DOE-STD-1055-93; DOE Standard Guideline to Good Practices For Maintenance Management Involvement at DOE Nuclear Facilities  

Broader source: Energy.gov (indexed) [DOE]

NOT MEASUREMENT NOT MEASUREMENT SENSITIVE SENSITIVE DOE-STD-1055-93 March 1993 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR MAINTENANCE MANAGEMENT INVOLVEMENT AT DOE NUCLEAR FACILITIES U.S. Department of Energy AREA MNTY Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831. Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal Rd., Springfield, VA 22161. Order No. DE93013953 DOE-STD-1055-93 FOREWORD The purpose of the Guideline to Good Practices for M

249

Changes in 2-Hydroxyestrone and 16?-Hydroxyestrone Metabolism with Flaxseed Consumption: Modification by COMT and CYP1B1 Genotype  

Science Journals Connector (OSTI)

...Fishers exact, P 0.006; Kruskal-Wallis ANOVA, P 0.021). ERRa levels...normal mammary epithelial cells (Kruskal-Wallis ANOVA, P 0.001). ERR overexpression...were tested by the nonparametric Kruskal-Wallis ANOVA (Figs. 1 2 3) . Associations...

Susan E. McCann; Jean Wactawski-Wende; Kari Kufel; James Olson; Bladimir Ovando; Susan Nowell Kadlubar; Warren Davis; Lisa Carter; Paola Muti; Peter G. Shields; Jo L. Freudenheim

2007-02-01T23:59:59.000Z

250

DOE-STD-1024-92; DOE Standard Guidelines For Use of Probabilistic Seismic Hazard Curves at Department of Energy Sites for Department of Energy Facilities  

Broader source: Energy.gov (indexed) [DOE]

STD-1024-92 STD-1024-92 December 1992 Change Notice #1 January 1996 DOE STANDARD GUIDELINES FOR USE OF PROBABILISTIC SEISMIC HAZARD CURVES AT DEPARTMENT OF ENERGY SITES FOR DEPARTMENT OF ENERGY FACILITIES U.S. Department of Energy AREA FACR Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; prices available from (615) 576-8401. Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal Rd., Springfield, VA 22161. Order No. DE93005386 DOE-STD-1024-92 (CH - 1) Subject: CHANGE NOTICE #1

251

DOE-STD-1153-2002; A Graded Approach for Evaluating Radiation Doses to Aquatic and Terrestrial Biota  

Broader source: Energy.gov (indexed) [DOE]

3 3 METHODS DERIVATION MODULE 3: METHODS DERIVATION DOE-STD-1153-2002 INTENTIONALLY BLANK DOE-STD-1153-2002 M3-1 1 Introduction and Basis for the Approach The Department of Energy (DOE) currently has in place a radiation dose limit of 1 rad/d (10 mGy/d) for the protection of aquatic organisms (DOE Order 5400.5), and has proposed dose limits for both aquatic and terrestrial organisms. These limits are: 1 rad/d (10 mGy/d) for aquatic animals; 1 rad/d (10 mGy/d) for terrestrial plants; and 0.1 rad/d (1 mGy/d) for terrestrial animals. Because the biota protection limits are dose-based, a calculational method is needed to demonstrate compliance. In theory, derived radionuclide concentration limits for environmental media (e.g., Biota Concentration Guides, BCGs, for water, sediment, or soil) provide a relatively straightforward and simple means to do so. However, because of the

252

Frequently Asked Questions Regarding DOE-STD-1195-2011, Design of Safety Significant Safety Instrumented Systems Used at DOE Non-Reactor Nuclear Facilities  

Broader source: Energy.gov [DOE]

Frequently Asked Questions Regarding DOE-STD-1195-2011 which provides requirements and guidance for the design, procurement, installation, testing, maintenance, operation, and quality assurance of safety instrumented systems (SIS) that may be used at Department of Energy (DOE) nonreactor nuclear facilities for safety significant (SS) functions.

253

DOE-STD-1033-92; Guide to Good Practices for Operations and Administration Updates Through Required Reading  

Broader source: Energy.gov (indexed) [DOE]

3-92 3-92 December 1992 CHANGE NOTICE NO.1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR OPERATIONS AND ADMINISTRATION UPDATES THROUGH REQUIRED READING U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No.1 DOE-STD-1033-92 December 1998 Guide to Good Practices for Operations and Administration Updates Through

254

DOE-STD-1146-2001; General Technical Base Qualification Standard DOE Defense Nuclear Facilities Technical Personnel  

Broader source: Energy.gov (indexed) [DOE]

46-2001 46-2001 October 2001 DOE STANDARD GENERAL TECHNICAL BASE QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1146-2001 iii APPROVAL The Federal Technical Capability Panel consists of senior Department of Energy managers responsible for overseeing the Federal Technical Capability Program. This Panel is responsible

255

DOE-STD-1039-93; Guide to Good Practices for Control of Equipment and System Status  

Broader source: Energy.gov (indexed) [DOE]

9-93 9-93 March 1993 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR CONTROL OF EQUIPMENT AND SYSTEM STATUS U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No. 1 DOE-STD-1039-93 December 1998 Guide to Good Practices for Control of Equipment and System Status Page / Section

256

DOE-STD-1041-93 CN-1; Guide to Good Practices for Shift Routines and Operating Practices  

Broader source: Energy.gov (indexed) [DOE]

1-93 1-93 June 1998 Change Notice No. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR SHIFT ROUTINES AND OPERATING PRACTICES U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A:Approved for public release; distribution unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No. 1 DOE-STD-1041-93 December 1998 Guide to Good Practices for Shift Routines and Operating Practices Page / Section Change

257

DOE-STD-1082-94; DOE Standard Preparation, Review, and Approval of Implementaiton Plans For Nuclear Safety Requirements  

Broader source: Energy.gov (indexed) [DOE]

82-94 82-94 October 1994 DOE STANDARD PREPARATION, REVIEW, AND APPROVAL OF IMPLEMENTATION PLANS FOR NUCLEAR SAFETY REQUIREMENTS U.S. Department of Energy AREA SAFT Washington D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615)576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE95001461 DOE-STD-1082-94 iii FOREWORD 1. This Department of Energy (DOE) technical standard has been prepared by the Office of Environment, Safety and Health with the assistance of Steve

258

DOE-STD-1069-94; Guideline to Good Practices for Maintenance Tools and Equipment Control at DOE Nuclear Facilities  

Broader source: Energy.gov (indexed) [DOE]

9-94 9-94 June 1994 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR MAINTENANCE TOOLS AND EQUIPMENT CONTROL AT DOE NUCLEAR FACILITIES U.S. Department of Energy Washington, D.C. 20585 AREA MNTY DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield VA 22161; (703) 487-4650. Order No. DE94014951 DOE-STD-1069-94 FOREWORD The purpose of the Guideline to Good Practices for Maintenance Tools and Equipment Control at DOE Nuclear Facilities is to provide contractor maintenance

259

DOE-STD-1058-93; DOE Standard Guide to Good Practices For Developing and Conducting Case Studies  

Broader source: Energy.gov (indexed) [DOE]

8-93 8-93 February 1993 DOE STANDARD GUIDE TO GOOD PRACTICES FOR DEVELOPING AND CONDUCTING CASE STUDIES U.S. Department of Energy FSC 6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831. Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal Rd., VA 22161. Order No. DE93012982 DOE-STD-1058-93 iii FOREWORD The purpose of this Department of Energy (DOE) Guide to Good Practices for Developing and Conducting Case Studies is to provide Department of Energy contractor organizations

260

DOE-STD-1045-93 CN-1; Guide to Good Practices for Notifications and Investigation of Abnormal Events  

Broader source: Energy.gov (indexed) [DOE]

5-93 5-93 June 1993 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR NOTIFICATIONS AND INVESTIGATION OF ABNORMAL EVENTS U.S. Department of Energy AREA MISC Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No. 1 DOE-STD-1045-93 December 1998 Guide to Good Practices for Notifications and Investigation of Abnormal Events

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

DOE-STD-1107-97; DOE Standard Knowledge, Skills, and Abilities For Key Radiation Protection Positions at DOE Facilities  

Broader source: Energy.gov (indexed) [DOE]

STANDARD STANDARD KNOWLEDGE, SKILLS, AND ABILITIES FOR KEY RADIATION PROTECTION POSITIONS AT DOE FACILITIES U.S. Department of Energy FSC 6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1107-97 January 1997 Reaffirmed June 2005 This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE97003656 Reaffirmation with Errata DOE-HDBK-1107-97 Knowledge, Skills, and Abilities for Key Radiation Protection Positions at DOE

262

DOE-STD-1012-92; DOE Guideline Guide to Good Practices for On-the-Job Training  

Broader source: Energy.gov (indexed) [DOE]

12-92 12-92 JULY 1992 DOE GUIDELINE GUIDE TO GOOD PRACTICES FOR ON-THE-JOB TRAINING U.S. Department of Energy FSC-6910-0008 Washington, D.C. 20585 This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information. P. O. Box 62, Oak Ridge, TN 37831; prices available from (615) 576-8401. Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal Rd., Springfield, VA 22161. Order No. DE92017682 DOE-STD-1012-92 iii FOREWORD The purpose of the Department of Energy (DOE) Guide to Good Practices for On- the-Job Training (OJT) is to provide DOE contractor organizations with information that can be used to modify existing programs or to develop new programs. This guide replaces

263

DOE-STD-1065-94; DOE Standard Guideline to Good Practices For Postmaintenance Testing at DOE Nuclear Facilities  

Broader source: Energy.gov (indexed) [DOE]

65-94 65-94 June 1994 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR POSTMAINTENANCE TESTING AT DOE NUCLEAR FACILITIES U.S. Department of Energy AREA MNTY Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE94014953 DOE-STD-1065-94 FOREWORD The purpose of the Guide to Good Practices for Postm aintenance T esting at DOE Nuclear Facilities is to provide contractor maintenance

264

DOE-STD-1040-93 CN-1; Guide to Good Practices for Control of On-Sight Training  

Broader source: Energy.gov (indexed) [DOE]

0-93 0-93 June 1993 CHANGE NOTICE NO. 1 December 1998 DOE STANDARD GUIDE TO GOOD PRACTICES FOR CONTROL OF ON-SHIFT TRAINING U.S. Department of Energy FSC 6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No.1 DOE-STD-1040-93 December 1998 Guide to Good Practices for Control of On-Shift Training Page/Section Change pg. vii / Definitions The definition "Performance-Based Training"

265

DOE-STD-1068-94; DOE Standard Guideline to Good Practices For Maintenance History at DOE Nuclear Facilities  

Broader source: Energy.gov (indexed) [DOE]

8-94 8-94 June 1994 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR MAINTENANCE HISTORY AT DOE NUCLEAR FACILITIES U.S. Department of Energy AREA MNTY Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE94014950 DOE-STD-1068-94 FOREW ORD The purpose of the Guideline to Good Practices for Maintenance History at DOE Nuclear Facilities is to provide contractor maintenance organizations with information

266

DOE-STD-1067; DOE Standard Guideline to Good Practices for Maintenance Facilities, Equipment, and Tools at DOE Nuclear Facilities  

Broader source: Energy.gov (indexed) [DOE]

7-94 7-94 June 1994 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR MAINTENANCE FACILITIES, EQUIPMENT, AND TOOLS AT DOE NUCLEAR FACILITIES U.S. Department of Energy AREA MNTY Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703)487-4650. Order No. DE94014952 DOE-STD-1067-94 FOREW ORD The Guideline to Good Practices for Maintenance Facilities, Equipment, and Tools at

267

DOE-STD-1153-2002; A Graded Approach for Evaluating Radiation Doses to Aquatic and Terrestrial Biota  

Broader source: Energy.gov (indexed) [DOE]

1153-2002 1153-2002 July 2002 DOE STANDARD A GRADED APPROACH FOR EVALUATING RADIATION DOSES TO AQUATIC AND TERRESTRIAL BIOTA U.S. Department of Energy AREA ENVR Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-STD-1153-2002 iii Foreword 1. Department of Energy (DOE) activities may expose populations of plants and animals to radioactive materials in environmental media, or to radioactive materials released in waste streams. This DOE voluntary

268

DOE-STD-1064-94; DOE Standard Guideline to Good Practices For Seasonal Facility Preservation at DOE Nuclear Facilities  

Broader source: Energy.gov (indexed) [DOE]

64-94 64-94 June 1994 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR SEASONAL FACILITY PRESERVATION AT DOE NUCLEAR FACILITIES U.S. Department of Energy Washington, D.C. 20585 AREA MNTY DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield VA 22161; (703) 487-4650. Order No. DE94014954 DOE-STD-1064-94 FOREWORD The Guideline to Good Practices for Seasonal Facility Preservation at DOE Nuclear Facilities provides contractor maintenance organizations with information

269

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

DEFINITIONS DEFINITIONS ................................................. 1-1 CHAPTER 2 CRITICAL LIFTS................................................................................. 2-1 2.1 CRITICAL-LIFT DETERMINATION........................................................ 2-1 2.2 CRITIAL-LIFT REQUIREMENTS............................................................. 2-2 CHAPTER 3 PREENGINEERED PRODUCTION LIFTS................................3-1 3.1 GENERAL....................................................................................................... 3-1 3.2 OPERATION EVALUATION ...................................................................... 3-2 3.2.1 Load Identification................................................................................

270

DOE-STD-1090-2007; Hoisting and Rigging Standard (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

DEFINITIONS........................................1-1 DEFINITIONS........................................1-1 CHAPTER 2 CRITICAL LIFTS .......................................................................2-1 2.1 CRITICAL-LIFT DETERMINATION........................................................ 2-1 2.2 CRITIAL-LIFT REQUIREMENTS............................................................. 2-2 CHAPTER 3 PREENGINEERED PRODUCTION LIFTS................................3-1 3.1 PRENGINEERED PRODUCTION LIFT DETERMINATION................ 3-1 3.2 LIFTING FIXTURES .................................................................................... 3-2 3.3.1 Design ................................................................................................... 3-2 3.3.2 Fabrication ............................................................................................

271

DOE-STD-1090-2007; Hoisting and Rigging Standard (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

6 6 PERSONNEL QUALIFICATION AND TRAINING 6-i Chapter 6 Personnel Qualification and Training This chapter describes personnel qualification and training. Only qualified personnel shall operate the equipment covered in this standard. 6.1 GENERAL ................................................................................................................................6-1 6.2 QUALIFICATION...................................................................................................................6-2 6.2.1 General.........................................................................................................................6-2 6.2.2 Operators of Cab-Operated and Pulpit-Operated Cranes .............................................6-2

272

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

6 6 PERSONNEL QUALIFICATION AND TRAINING 6-i Chapter 6 Personnel Qualification and Training This chapter describes personnel qualification and training. Only qualified personnel shall operate the equipment covered in this standard. 6.1 GENERAL................................................................................................................................6-1 6.2 QUALIFICATION...................................................................................................................6-2 6.2.1 General.........................................................................................................................6-2 6.2.2 Operators of Cap-Operated and Pulpit-Operated Cranes .............................................6-2

273

DOE-STD-1090-2007; Hoisting and Rigging Standard (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

5 5 HOSTILE ENVIRONMENTS 5-i Chapter 5 Hostile Environments This chapter describes provisions for hoisting and rigging operations in hostile work environments. 5.1 GENERAL ................................................................................................................................5-1 5.2 HOSTILE ENVIRONMENT PLAN ......................................................................................5-2 5.2.1 Marking and Posting ....................................................................................................5-2 5.2.2 Inspection and Testing .................................................................................................5-2 EXHIBIT I Hostile Environment Plan ............................................................................................5-3

274

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

3 3 PREENGINEERED PRODUCTION LIFTS 3-i Chapter 3 Preengineered Production Lifts This chapter provides requirements for the design, evaluation, and performance of preengineered production lifts. This lift designation may be used at the discretion of the contractor for selected operations. 3.1 GENERAL................................................................................................................................3-1 3.2 OPERATION EVALUATION................................................................................................3-2 3.2.1 Load Identification.......................................................................................................3-2 3.2.2 Task Determination......................................................................................................3-2

275

DOE-STD-1090-2007; Hoisting and Rigging Standard (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

3 3 PREENGINEERED PRODUCTION LIFTS 3-i Chapter 3 Preengineered Production Lifts This chapter provides requirements for the design, evaluation, and performance of preengineered production lifts. This lift designation may be used at the discretion of the contractor for selected operations. 3.1 PREENGINEERED PRODUCTION LIFT DETERMINATION.......................................3-1 3.2 LIFTING FIXTURES..............................................................................................................3-2 3.2.1 Design ..........................................................................................................................3-2 3.2.2 Fabrication ...................................................................................................................3-2

276

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

5 5 HOSTILE ENVIRONMENTS 5-i Chapter 5 Hostile Environments This chapter describes provisions for hoisting and rigging operations in hostile work environments. 5.1 GENERAL................................................................................................................................5-1 5.2 HOSTILE ENVIRONMENT PLAN ......................................................................................5-2 5.2.1 Marking and Posting ....................................................................................................5-2 5.2.2 Inspection and Testing .................................................................................................5-2 EXHIBIT I Hostile Environment Plan ............................................................................................5-3

277

DOE-STD-1090-2007; Hoisting and Rigging Standard (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

5 5 CONSTRUCTION HOISTING AND RIGGING EQUIPMENT REQUIREMENTS 15-i This chapter outlines the requirements for the safe use of hoisting and rigging equipment on construction projects at DOE installations. 15.1 GENERAL ...............................................................................................................................15-1 15.2 PERSONNEL QUALIFICATIONS.........................................................................................15-2 15.2.1 Qualified Operators of Mobile Cranes.......................................................................15-2 15.2.2 Qualified Operators of Forklift Trucks ......................................................................15-3 15.2.3 Qualified Riggers .......................................................................................................15-4

278

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

5 5 CONSTRUCTION HOISTING AND RIGGING EQUIPMENT REQUIREMENTS 15-i Chapter 15 Construction Hoisting and Rigging Equipment Requirements This chapter outlines the requirements for the safe use of hoisting and rigging equipment on construction projects at DOE installations. 15.1 GENERAL ...............................................................................................................................15-1 15.2 PERSONNEL QUALIFICATIONS.........................................................................................15-2 15.2.1 Qualified Operators of Mobile Cranes.......................................................................15-2 15.2.2 Qualified Operators of Forklift Trucks ......................................................................15-3

279

DOE-STD-1120-2005; Integration of Environment, Safety, and Health...  

Office of Environmental Management (EM)

DISPOSITION ACTIVITIES Volume 2 of 2: Appendices U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release;...

280

Supplementary information Figure S1: Left: Comparison of PM2.5 levels measured with one of the optical  

E-Print Network [OSTI]

Palau Reial L3 87 24 21 6 Bon Pastor L9 145 98 46 28 Sagrera L9 180 53 59 19 Mean Mean in trains PM10 PM10 std PM2.5 std 5min 1.20 0.22 0.43 0.10 Fontana L3 0.49 0.10 0.15 0.05 Palau Reial L3 0.30 0.08 0

Meskhidze, Nicholas

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Characterization of Representative Materials in Support of Safe, Long Term Storage of Surplus Plutonium in DOE-STD-3013 Containers  

SciTech Connect (OSTI)

The Surveillance and Monitoring Program is a joint Los Alamos National Laboratory/Savannah River Site effort funded by the Department of Energy-Environmental Management to provide the technical basis for the safe, long-term storage (up to 50 years) of over 6 metric tons of plutonium stored in over 5,000 DOE-STD-3013 containers at various facilities around the DOE complex. The majority of this material is plutonium that is surplus to the nuclear weapons program, and much of it is destined for conversion to mixed oxide fuel for use in US nuclear power plants. The form of the plutonium ranges from relatively pure metal and oxide to very impure oxide. The performance of the 3013 containers has been shown to depend on moisture content and on the levels, types and chemical forms of the impurities. The oxide materials that present the greatest challenge to the storage container are those that contain chloride salts. Other common impurities include oxides and other compounds of calcium, magnesium, iron, and nickel. Over the past 15 years the program has collected a large body of experimental data on 54 samples of plutonium, with 53 chosen to represent the broader population of materials in storage. This paper summarizes the characterization data, moisture analysis, particle size, surface area, density, wattage, actinide composition, trace element impurity analysis, and shelf life surveillance data and includes origin and process history information. Limited characterization data on fourteen nonrepresentative samples is also presented.

Narlesky, Joshua E. [Los Alamos National Laboratory; Stroud, Mary Ann [Los Alamos National Laboratory; Smith, Paul Herrick [Los Alamos National Laboratory; Wayne, David M. [Los Alamos National Laboratory; Mason, Richard E. [MET-1: ACTINIDE PROCESSING SUPPORT; Worl, Laura A. [Los Alamos National Laboratory

2013-02-15T23:59:59.000Z

282

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

11-i Chapter 11 11-i Chapter 11 Wire Rope and Slings CHAPTER 11 WIRE ROPE AND SLINGS This chapter provides requirements for the fabrication and use of wire rope and slings used in hoisting and rigging. 11.1 GENERAL ...............................................................................................................................11-1 11.2 WIRE ROPE ............................................................................................................................11-4 11.2.1 Wire-Rope Lays.........................................................................................................11-4 11.2.2 Wire-Rope Cores .......................................................................................................11-4 11.2.3 Wire Rope for General Purposes

283

DOE-STD-1120-2005; Integration of Environment Safety and Health...  

Office of Environmental Management (EM)

20-2005 Volume 1 of 2 April 2005 DOE STANDARD INTEGRATION OF ENVIRONMENT, SAFETY, AND HEALTH INTO FACILITY DISPOSITION ACTIVITIES Volume 1 of 2: Documented Safety Analysis for...

284

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

4 4 LIFTING PERSONNEL 4-i Chapter 4 Lifting Personnel This chapter describes requirements for lifting personnel. 4.1 GENERAL................................................................................................................................4-1 4.1.1 Personnel Lifting Evaluation .......................................................................................4-1 4.1.2 Designated Leader .......................................................................................................4-1 4.1.3 Trial Lift.......................................................................................................................4-2 4.1.4 Lifting Operations........................................................................................................4-2

285

DOE-STD-1120-2005; Integration of Environment Safety and Health into Facility Disposition Activities  

Broader source: Energy.gov (indexed) [DOE]

20-2005 20-2005 Volume 1 of 2 April 2005 DOE STANDARD INTEGRATION OF ENVIRONMENT, SAFETY, AND HEALTH INTO FACILITY DISPOSITION ACTIVITIES Volume 1 of 2: Documented Safety Analysis for Decommissioning and Environmental Restoration Projects U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE TS i This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000.

286

DOE-STD-1073-93-Pt. 1; DOE Standard Guide for Operational Configuration Management Program  

Broader source: Energy.gov (indexed) [DOE]

1 1 CHAPTER 2 IMPLEMENTATION GUIDANCE FOR OPERATIONAL CONFIGURATION MANAGEMENT This guidance is appropriate for high-hazard facilities expected to operate for an extended period. Since DOE facilities vary in hazard level and circumstances of operation, a graded approach to implementation should be adopted. 2.1 PROGRAM MANAGEMENT ELEMENT The program management element of a configuration management (CM) program coordinates program development and implementation and ensures overall program effectiveness. This element leads the development of the other CM program elements. Development of an effective CM program should be initiated promptly, where needed, to address known issues, to improve compliance with various DOE Orders, and to produce the benefits of improved safety, reduced errors, and increased efficiency.

287

DOE-STD-1073-93-Pt. 1; DOE Standard Guide for Operational Configuration Management Program  

Broader source: Energy.gov (indexed) [DOE]

3-93-Pt.2 3-93-Pt.2 November 1993 DOE STANDARD GUIDE FOR OPERATIONAL CONFIGURATION MANAGEMENT PROGRAM Including the Adjunct Programs of Design Reconstitution and Material Condition and Aging Management PART ll U.S. Department of Energy AREA CMAN Washington, D.C. 20585 DISTRIBUTION STATEMENT A: Approved for public release; distribution Is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal Rd., Springfield, VA 22161. Order No. DE94005408 i CONTENTS FOREWORD .

288

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

8 8 HOISTS 8-i Chapter 8 Hoists This chapter provides safety standards for inspecting, testing, and operating hoists not permanently mounted on overhead cranes and implements the requirements of ASME B30.11 ("Monorail Systems and Underhung Cranes"), B30.16["Overhead Hoists (Underhung)"], and B30.21 ("Manually Lever Operated Hoists"). 8.1 GENERAL .................................................................................................................................8-1 8.1.1 Operator Training/Qualification ..................................................................................8-4 8.1.2 Marking........................................................................................................................8-4

289

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

9-2004 9-2004 12-i Chapter 12 Rigging Accessories CHAPTER 12 RIGGING ACCESSORIES This chapter provides requirements for rigging accessories used in hoisting and rigging - shackles, eyebolts, rings, wire-rope clips, turnbuckles, rigging hooks, and load-indicating devices. 12.1 GENERAL ...............................................................................................................................12-1 12.1.1 Inspections .................................................................................................................12-1 12.1.2 Testing .....................................................................................................................12-3 12.1.3 Good and Bad Rigging Practices ...............................................................................12-3

290

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

3 3 LOAD HOOKS 13-i Chapter 13 Load Hooks This chapter provides safety standards for the inspection, testing, and maintenance of load hooks installed on cranes or hoists and implements the requirements of ASME B30.10, Chapter 10-1, "Hooks." See Chapter 12, "Rigging Accessories," for rigging hook requirements. 13.1 GENERAL ...............................................................................................................................13-1 13.1.1 Marking......................................................................................................................13-1 13.1.2 Attachments ...............................................................................................................13-1

291

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

7 7 OVERHEAD AND GANTRY CRANES 7-i Chapter 7 Overhead and Gantry Cranes This chapter specifies operation, inspection, maintenance, and testing requirements for the use of overhead and gantry cranes and implements the requirements of ASME B30.2 ["Overhead and Gantry Cranes (Top- Running Bridge, Single or Multiple Girder, Top-Running Trolley Hoist)"], B30.11 ("Monorail Systems and Underhung Cranes"), and B30.17 ["Overhead and Gantry Cranes (Top-Running Bridge, Single Girder, Underhung Hoist")]. Only equipment built to the appropriate design standards shall be used in DOE installations. 7.1 GENERAL .................................................................................................................................7-1

292

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

9 9 MOBILE CRANES 9-i Chapter 9 Mobile Cranes This chapter specifies operation, inspection, maintenance, and testing requirements for the use of mobile cranes and implements the requirements of ASME B30.5 ("Mobile and Locomotive Cranes"). Only equipment built to appropriate design standards shall be used at DOE installations. 9.1 GENERAL .................................................................................................................................9-1 9.1.1 Operator Training/Qualification ..................................................................................9-1 9.1.2 Load Limits..................................................................................................................9-1 9.1.3 Load Rating Chart........................................................................................................9-1

293

DOE-STD-1090-2007; Hoisting and Rigging Standard (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

7 7 REFERENCES 17-1 Chapter 17 References American Institute of Steel Construction AISC Specifications for the design, fabrication, and erection of structural steel for buildings. American Iron and Steel Institute AISI Standards for Type-302 or Type-304 stainless steel. American National Standards Institute and the American Society of Mechanical Engineers ANSI A10.28, Work Platforms Suspended From Cranes or Derricks. ANSI A10.18, Floor and Wall Openings, Railings and Toe Boards. ASME B30.1, Jacks ASME B30.2, Overhead and Gantry Cranes (Top-Running Bridge, Single or Multiple Girder, Top-Running Trolley Hoist). ASME B30.5, Mobile and Locomotive Cranes. ASME B30.6, Derricks. ASME B30.7, Base-Mounted Drum Hoists. ASME B30.9, Slings.

294

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

CHAPTER 17 CHAPTER 17 REFERENCES 17-1 Chapter 17 References American Institute of Steel Construction AISC Specifications for the design, fabrication, and erection of structural steel for buildings. American Iron and Steel Institute AISI Standards for Type-302 or Type-304 stainless steel. American National Standards Institute and American Society of Mechanical Engineers ANSI A10.28, Work Platforms Suspended From Cranes or Derricks. ANSI A10.18, Floor and Wall Openings, Railings and Toe Boards. ASME B30.2, Overhead and Gantry Cranes (Top-Running Bridge, Single or Multiple Girder, Top-Running Trolley Hoist). ASME B30.5, Mobile and Locomotive Cranes. ASME B30.6, Derricks. ASME B30.7, Base-Mounted Drum Hoists. ASME B30.9, Slings. ASME B30.10, Hooks.

295

NSTP 2002-2 Methodology for Final Hazard Categorization for Nuclear  

Broader source: Energy.gov (indexed) [DOE]

NSTP 2002-2 Methodology for Final Hazard Categorization for Nuclear NSTP 2002-2 Methodology for Final Hazard Categorization for Nuclear Facilities from Category 3 to Radiological (11/13/02). NSTP 2002-2 Methodology for Final Hazard Categorization for Nuclear Facilities from Category 3 to Radiological (11/13/02). 0 CFR 830 Subpart B requires that all DOE nuclear facilities categorized as HC-3 or above have a DOE approved safety basis compliant with the requirements of Subpart B. The rule requires the use of DOESTD- 1027-92 (STD- 1027) as the methodology for categorizing DOE nuclear facilities. STD- 1027 requires a preliminary categorization be established on the basis of the inventory of radionuclides in a facility or involved in an activity. It also permits a safety analyses (see STD-1027 section 3.1.2) to establish a final

296

Sent: Thu Aug 12 21:00:36 2010 Subject: RIN: 1904-AC13 Docket: EE-RM/STD-02-112  

Broader source: Energy.gov (indexed) [DOE]

Sent: Thu Aug 12 21:00:36 2010 Sent: Thu Aug 12 21:00:36 2010 Subject: RIN: 1904-AC13 Docket: EE-RM/STD-02-112 Mr. Nasseri, Please find the comments of the Natural Resources Defense Council on Energy Efficiency and Sustainable Design Standards for New Federal Buildings attached for the docket. We are also resubmitting the comments we wrote for the Interim Final Rule on the Energy Efficiency Standard for Federal Buildings, which were submitted on January 30, 2007, as Annex A to our new comments. Thank you for the opportunity to comment, Christine Chang Christine Chang | Legal Fellow | Natural Resources Defense Council Phone: 212.727.4431 Fax: 212.727.1773 | 40 West 20th Street, New York, NY 10011

297

DOE-STD-1071-94; DOE Standard Guideline to Good Practices for Material Receipt, Inspection, Handling, Storage, Retrieval, and Issuance at DOE Nuclear Facilities  

Broader source: Energy.gov (indexed) [DOE]

71-94 71-94 June 1994 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR MATERIAL RECEIPT, INSPECTION, HANDLING, STORAGE, RETRIEVAL, AND ISSUANCE AT DOE NUCLEAR FACILITIES U.S. Department of Energy AREA MNTY Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE94014949 DOE-STD-1071-94 FOREWORD The Guideline to Good Practices for Material Receipt, Inspection, Handling, Storage,

298

DOE-STD-1053-93; DOE Standard Guideline to Good Practices For Control of Maintenance Activities at DOE Nuclear Facilities  

Broader source: Energy.gov (indexed) [DOE]

3-93 3-93 March 1993 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR CONTROL OF MAINTENANCE ACTIVITIES AT DOE NUCLEAR FACILITIES U.S. Department of Energy AREA MNTY Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831. Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal Rd., Springfield, VA 22161. Order No. DE93014268 DOE-STD-1053-93 FOREWORD The purpose of the Guideline to Good Practices for Control of M aintenance A ctivities at DOE Nuclear Facilities is to provide contractor maintenance organizations with information

299

DOE-STD-1051-93; DOE Standard Guideline to Good Practices For Maintenance Organization and Administration at DOE Nuclear Facilities  

Broader source: Energy.gov (indexed) [DOE]

1-93 1-93 March 1993 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR MAINTENANCE ORGANIZATION AND ADMINISTRATION AT DOE NUCLEAR FACILITIES U.S. Department of Energy AREA MNTY Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831. Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal Rd., VA 22161 Order No. DE93013951 DOE-STD-1051-93 FOREWORD The purpose of the Guideline to Good Practices for M aintenance Organization and A dm inistration at DOE Nuclear Facilities is to provide contractor maintenance

300

DOE-STD-1050-93; DOE Standard Guideline to Good Practices For Planning, Scheduling, and Coordination of Maintenance at DOE Nuclear Facilities  

Broader source: Energy.gov (indexed) [DOE]

0-93 0-93 March 1993 DOE STANDARD GUIDELINE TO GOOD PRACTICES FOR PLANNING, SCHEDULING, AND COORDINATION OF MAINTENANCE AT DOE NUCLEAR FACILITIES U.S. Department of Energy AREA MNTY Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62 Oak Ridge, TN 37831. Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal Rd., Springfield, VA 22161. Order No. DE93014266 DOE-STD-1050-93 FOREWORD The purpose of the Guideline to Good Practices for Planning, Scheduling, and Coordination of M aintenance at DOE Nuclear Facilities is to provide contractor maintenance

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

DOE-STD-1027-92; Hazard Categorization and Accident Analysis Techniques For Compliance With DOE Order 5480.23, Nuclear Safety Analysis Reports  

Broader source: Energy.gov (indexed) [DOE]

7-92 7-92 December 1992 CHANGE NOTICE NO.1 September 1997 DOE STANDARD HAZARD CATEGORIZATION AND ACCIDENT ANALYSIS TECHNIQUES FOR COMPLIANCE WITH DOE ORDER 5480.23, NUCLEAR SAFETY ANALYSIS REPORTS U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE98001283 Change Notice No. 1 DOE-STD-1027-92

302

DOE-STD-3007-93 CN-1; DOE Standard Guidelines For Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities  

Broader source: Energy.gov (indexed) [DOE]

7-93 7-93 November 1993 CHANGE NOTICE NO. 1 September 1998 DOE STANDARD GUIDELINES FOR PREPARING CRITICALITY SAFETY EVALUATIONS AT DEPARTMENT OF ENERGY NON-REACTOR NUCLEAR FACILITIES U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (423) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Order No. DE98003918 Change Notice No. 1 DOE-STD-3007-93 September 1998

303

University of Connecticut Health Center Page 1 of 2 John Dempsey Hospital  

E-Print Network [OSTI]

University of Connecticut Health Center Page 1 of 2 John Dempsey Hospital Infection Control Manual: To establish guidelines for the reporting of Communicable Diseases to the State of Connecticut Department.e., TB, STD, AIDS) will be completed and filed at the State of Connecticut Department of Public Health

Oliver, Douglas L.

304

Microsoft Word - EA for Fedl Bldgs Std Update to 90 1-2010 final 28jun13  

Broader source: Energy.gov (indexed) [DOE]

Environmental Assessment for Final Rule, 10 CFR 433, "Energy Environmental Assessment for Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings" (DOE/EA-1918) June 28, 2013 2 Environmental Assessment for Final Rule, 10 CFR 433, "Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings" (DOE/EA-1918) SUMMARY The U.S. Department of Energy (DOE) has prepared this environmental assessment (EA) for DOE's Final Rule, 10 CFR Part 433, "Energy Efficiency Standards for New Federal Commercial and Multi-Family High-Rise Residential Buildings". The Final Rule updates the baseline standard in 10 CFR 433 to the latest private sector standard based on cost-effectiveness and DOE's determination that energy efficiency has

305

Microsoft PowerPoint - 130709 DOE-NETL CO2 Capture Technology Meeting Linde Presentation v1  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Slipstream pilot plant demonstration of an amine- Slipstream pilot plant demonstration of an amine- based post-combustion capture technology for CO 2 capture from coal-fired power plant flue gas DOE funding award DE-FE0007453 2013 NETL CO 2 Capture Technology Meeting Krish R. Krishnamurthy, Linde LLC July 8-11, 2013 Pittsburgh, PA 2 The Linde Group Overview and Carbon Capture Expertise 1 Linde Engineering Technology-focused Air Separation Global #1 Air Separation Global #1 Hydrogen/Syn Gas Global #2 Hydrogen/Syn Gas Global #2 Olefins Global #2 Olefins Global #2 Natural Gas Global #3 Natural Gas Global #3 HyCO Tonnage Plants >70 plants HyCO Tonnage Plants >70 plants HyCO Tonnage Plants >70 plants ASU Tonnage Plants >300 plants ASU Tonnage Plants >300 plants ECOVAR Std Plants >1,000 plants ECOVAR Std Plants >1,000 plants

306

CDMA Technology 2G -cdmaOne  

E-Print Network [OSTI]

, combines IS-95A, ANSI-J-STD-008 and TSB-74 into a single document. The ANSI-J-STD-008 specification interaction between IS-95A and CDMA PCS systems that conform to ANSI-J-STD-008. Many operators that have

Li, Tiffany Jing

307

DOE 5700.6C, 10CFR830.120, DOE-ER-STD-6001-92, and Covey-based TQM: A historical perspective on current issues in research environments  

SciTech Connect (OSTI)

Three years ago there were no standards or published guidelines for quality in research environments. Today, one standard has been published, and three guidelines documents are in final draft form and about to be published. In this paper, I describe the events that led to the writing of DOE 5700.6C, 10CFR830.120, and DOE-ER-STD-6001-92, focusing on the cultural barriers that arose (largely in the community of quality assurance professionals) during this process. I go on to describe why I believe that implementing DOE 5700.6C and 10CFR830.120 must be pushed even further toward an approach that embodies the Malcolm Baldrige National Quality Award and why even this is not far enough. The reason is because the most crucial aspect of successfully implementing a quality initiative is to base it on a cohesive, unified foundation of organizational and individual values and beliefs. Stephen Covey`s 7 Habits of Highly Effective People and Principle Centered Leadership provide such a foundations.

Bodnarczuk, M.

1994-06-01T23:59:59.000Z

308

NA SD 452.2  

National Nuclear Security Administration (NNSA)

input document SS-21 seamless safety for the 21 st century STA senior technical advisor STD Standard TA technical advisor TSR technical safety requirement USQ unreviewed...

309

2Q CY2007 (PDF), Facility Representative Program Performance Indicators  

Broader source: Energy.gov (indexed) [DOE]

2Q CY2007 (PDF), Facility Representative Program Performance 2Q CY2007 (PDF), Facility Representative Program Performance Indicators Quarterly Report 2Q CY2007 (PDF), Facility Representative Program Performance Indicators Quarterly Report Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April to June 2007. Data for these indicators are gathered by field elements quarterly per DOE-STD-1063-2006, Facility Representatives, and reported to Headquarters program offices for evaluation and feedback to impove the FR Program. A summary of this quarter's data concluded: 74% Fully Qualified 94% Staffing Level ( last quarter was

310

2Q CY2008 (PDF), Facility Representative Program Performance Indicators  

Broader source: Energy.gov (indexed) [DOE]

2Q CY2008 (PDF), Facility Representative Program Performance 2Q CY2008 (PDF), Facility Representative Program Performance Indicators Quarterly Report 2Q CY2008 (PDF), Facility Representative Program Performance Indicators Quarterly Report Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April to June 2008. Data for these indicators are gathered by Field elements quarterly per DOE-STD- 1063-2006, Facility Representatives, and reported to Headquarters program offices for evaluation and feedback to improve the FR Program. A summary of this quarter's data concluded: 87% Fully Qualifed ( last quarter was 85%) 86% Staffing Level ( last quarter was 88%)

311

Resource Assessment for Hydrogen Production: Hydrogen Production...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Administration ERR Estimated Recoverable Reserves FCEV fuel cell electric vehicle GHG greenhouse gas GW gigawatt GWh gigawatt-hour GWdt gigawatt-days thermal H2A Hydrogen...

312

Rate Coefficients and Kinetic Isotope Effect for the C2H Reactions with NH3 and ND3 in the 104?294 K Temperature Range  

Science Journals Connector (OSTI)

Departments of Chemistry and Physics and Lawrence Berkeley National Laboratory, University of California, Berkeley, California 94720 ... The chemiluminescence signal is detected using a photomultiplier tube with a 430 nm band-pass filter (10 nm band-pass) and recorded using a multichannel scaler in a photon counting regime. ... Using the NO + O ? NO2* chemiluminescence as a calibration std., CH* formation rates were derived from the measured I(CH*), and the values of the rate coeff. ...

Boris Nizamov; Stephen R. Leone

2004-03-31T23:59:59.000Z

313

Implementing US Department of Energy lessons learned programs. Volume 2  

SciTech Connect (OSTI)

The DOE Lessons Learned Handbook is a two-volume publication developed to supplement the DOE Lessons Learned Standard (DOE-STD-7501-95) with information that will organizations in developing or improving their lessons learned programs. Volume 1 includes greater detail than the Standard in areas such as identification and documentation of lessons learned; it also contains sections on specific processes such as training and performance measurement. Volume 2 (this document) contains examples of program documents developed by existing lessons learned programs as well as communications material, functional categories, transmittal documents, sources of professional and industry lessons learned, and frequently asked questions about the Lessons Learned List Service.

NONE

1995-08-01T23:59:59.000Z

314

DOE-STD-1168-2013  

Broader source: Energy.gov [DOE]

Confinement Ventilation and Process Gas Treatment Functional Area Qualification Standard The Confinement Ventilation and Process Gas Treatment Functional Area Qualification Standard establishes common functional area competency requirements for all DOE CV&PGT personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.

315

DOE-STD-1162-2013  

Broader source: Energy.gov [DOE]

Instrumentation and Control Functional Area Qualification Standard The primary purpose of the Technical Qualification Program (TQP) is to ensure employees have the requisite technical competency to support the mission of the Department. The TQP forms the basis for the development and assignment of DOE personnel responsible for ensuring the safe operation of defense nuclear facilities.

316

DOE-STD-1194-2011  

Broader source: Energy.gov [DOE]

Nuclear Materials Control and Accountability Change Notice 3 This document describes establishing and maintaining a Material Control and Accountability (MC&A) program, where each MC&A program element is a part of a quality MC&A program.

317

DOE-STD-1189-2008  

Broader source: Energy.gov [DOE]

INTEGRATION OF SAFETY INTO THE DESIGN PROCESS The Standard provides guidance on a process of integration of Safety-in-Design intended to implement the applicable ISM core functions—define the work, analyze the hazards, establish the controls—necessary to provide protection of the public, workers, and the environment from harmful effects of radiation and other such toxic and hazardous aspects attendant to the work.

318

DOE-STD-1027-92  

Broader source: Energy.gov [DOE]

Hazard Categorization and Accident Analysis Techniques for Compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports Change Notice No. 1 (September 1997) The purpose of this DOE Standard is to establish guidance for the preparation and review of hazard categorization and accident analyses techniques as required in DOE Order 5480.23, Nuclear Safety Analysis Reports.

319

DOE-STD-1183-2007  

Broader source: Energy.gov [DOE]

Nuclear Safety Specialist Functional Area Qualification Standard The Nuclear Safety Specialist FAQS establishes common functional area competency requirements for all DOE nuclear safety specialist personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.

320

DOE-STD-1134-99  

Broader source: Energy.gov [DOE]

Review Guide For Criticality Safety Evaluations The purpose of this document is to provide a set of guidelines, not checklists, for use by DOE criticality safety personnel when reviewing criticality safety evaluations produced by the contractor. This review guide is intended to provide a consistent framework for assuring that acceptable evaluations are produced by DOE contractors.

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

DOE-STD-3007-2007  

Broader source: Energy.gov [DOE]

Guidelines for Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities This standard provides a framework for generating Criticality Safety Evaluations (CSE) supporting fissionable material operations at Department of Energy (DOE) nonreactor nuclear facilities. This standard imposes no new criticality safety analysis requirements.

322

DOE-STD-1135-99  

Broader source: Energy.gov [DOE]

Guidance for Nuclear Criticality Safety Engineer Training and Qualification CANCELLED The information contained in this Standard describes the requirements for Training and Qualification of Contractor NCS Engineers in the U. S. Department of Energy (DOE) complex to facilitate hiring and maintaining of trained and qualified NCS staff.

323

DOE-STD-1156-2002  

Broader source: Energy.gov [DOE]

Environmental Compliance Functional Area Qualification Standard The Environmental Compliance Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities impacting the safe operation of DOE’s most hazardous facilities.

324

DOE-STD-6002-96  

Broader source: Energy.gov [DOE]

Safety of Magnetic Fusion Facilities: Requirements This Standard identifies safety requirements for magnetic fusion facilities. Also, safety principles are established to provide a framework within which the requirements can be implemented to build safety into fusion facility design and operations.

325

DOE-STD-1182-2014  

Broader source: Energy.gov [DOE]

Civil/Structural Engineering Functional Area Qualification Standard The Civil/Structural Engineering Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.

326

DOE-STD-0100T-93  

Broader source: Energy.gov [DOE]

Licensed Reactor Nuclear Safety Criteria Applicable to DOE Reactors Canceled | Superseding DOE/NE-0100T (April 1991) This document identifies nuclear safety criteria applied to licensed reactors. The degree of application of these criteria to a DOE-owned reactor, consistent with their application to comparable licensed reactors, must be determined by the DOE and DOE contractor.

327

DOE-STD-1066-97  

Broader source: Energy.gov [DOE]

Fire Protection Design Criteria This Standard provides supplemental fire protection guidance applicable to the design and construction of DOE facilities and site features (such as water distribution systems) that are also provided for fire protection. It is intended to be used in conjunction with the applicable building code, National Fire Protection Association (NFPA) Codes and Standards, and any other applicable DOE construction criteria.

328

DOE-STD-5506-2007  

Broader source: Energy.gov [DOE]

Preparation of Safety Basis Documents for Transuranic The DOE is responsible for the safe handling, packaging and ultimate disposal of TRU wastes at the Waste Isolation Pilot Plant (WIPP) located near Carlsbad, New Mexico. Much of this waste, which is a result of legacy operations supporting the U.S. nuclear weapons mission, is now stored at numerous DOE sites located across the United States.

329

DOE-STD-1091-96  

Broader source: Energy.gov [DOE]

Firearms Safety Cancellation (January 31, 2008) The purpose of this Technical Standard is to facilitate the development, implementation, and maintenance of a comprehensive firearms safety program so as to achieve the policy objectives and fulfill the requirements delineated in DOE O 440.1, "Worker Protection Management for DOE Federal and Contractor Employees."

330

DOE-STD-3013-2012  

Broader source: Energy.gov [DOE]

Stabilization, Packaging, and Storage of Plutonium-Bearing Materials This Standard provides criteria for stabilization of plutonium-bearing materials at DOE facilities to safe and stable forms and packaging for storage with minimal surveillance for up to 50 years.

331

DOE-STD-1172-2011  

Broader source: Energy.gov [DOE]

Safety Software Quality Assurance Functional Area Qualification Standard This SSQA FAQS identifies the minimum technical competency requirements for DOE personnel who have a responsibility for safety software. Although there may be other competency requirements associated with the positions held by DOE personnel, this technical FAQS is limited to identifying the specific technical competencies required throughout all defense nuclear facilities.

332

DOE-STD-1196-2011  

Broader source: Energy.gov [DOE]

Concentration Technical Standard This standard supports the implementation of Department of Energy (DOE) Order 458.1, Radiation Protection of the Public and the Environment. It also establishes the numerical values of DCSs in a manner reflecting the current state of knowledge and practice in radiation protection

333

DOE-STD-1025-2008  

Broader source: Energy.gov [DOE]

Weapons Quality Assurance Qualification Standard This technical FAQS identifies the minimum technical competency requirements for DOE Weapon Quality Assurance personnel. These positions are the Weapon Quality Assurance Specialist, and the Weapon Quality Assurance Engineer/Scientist.

334

DOE-STD-1174-2013  

Broader source: Energy.gov [DOE]

Radiation Protection Functional Area Qualification Standard The Radiation Protection Functional Area Qualification Standard (FAQS) establishes common functional area competency requirements for all DOE Radiation Protection personnel who provide assistance, or direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.

335

DOE-STD-1047-2008  

Broader source: Energy.gov [DOE]

Safety Functions and Other Features of Remotely Operated Weapon Systems This standard summarizes safety functions and other features of Remotely Operated Weapon Systems (ROWS) requested most frequently by users and safety personnel at sites of the U.S. Department of Energy (including the National Nuclear Security Administration). These design features are intended to improve the safety, reliability, and ease of use of these systems; they may also improve the performance of these systems.

336

DOE-STD-5507-2013  

Broader source: Energy.gov [DOE]

Standard for Communicating Waste Characterization and DOT Hazard Classification Requirements for Low Specific Activity Materials and Surface Contaminated Objects Although other types of radioactive material and waste may be candidate LSA material or SCO, this standard focuses solely on low-level waste (LLW)3. The DOE ships various types of radioactive waste stemming from current and historical operations. Generally, candidate LSA material and SCO within the DOE complex are wastes generated from the clean-up and deactivation of World War II and Cold War era nuclear processing and weapons support operations. These waste matrices can be complex. The level of effort required to characterize waste varies based on the type and origin of waste being generated.

337

DOE-STD-1095-2011  

Broader source: Energy.gov [DOE]

Department of Energy Laboratory Accreditation Program for Personnel Dosimetry This technical standard describes the U.S. Department of Energy Laboratory Accreditation Program for external dosimetry, in support of worker health, safety, and security. DOELAP accreditation involves performance testing and documentation of program elements important to the long-term quality assurance of a dosimetry program and its ability to accurately measure, record, and report occupational whole body and extremity dose.

338

DOE-STD-1173-2009  

Broader source: Energy.gov [DOE]

Criticality Safety Functional Areq Qualification Standard The Criticality Safety FAQS establishes common functional area competency requirements for DOE criticality safety personnel who provide assistance, or direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s nuclear facilities.

339

DOE-STD-1185-2007  

Broader source: Energy.gov [DOE]

Nuclear Explosive Safety Study Functional Area Qualification Standard The technical FAQS has been developed as a tool to assist DOE program and field offices in the development and implementation of the TQP in their organization. For ease of transportability of qualifications between DOE elements, program and field offices are expected to use this technical FAQS without modification.

340

DOE-STD-1210-2012  

Broader source: Energy.gov [DOE]

Incidents of Security Concern This Technical Standard describes establishing and maintaining a quality incident of security concern (IOSC) program. Each site/facility establishes an IOSC program to ensure that the occurrence of a security incident prompts the appropriate graded response including an assessment of the potential impacts, appropriate notifications/reporting, extent of condition, and corrective actions.

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

DOE-STD-1158-2010  

Broader source: Energy.gov [DOE]

Self-Assessment Standard for DOE Contractor Criticality Safety Programs This document encompasses all elements of the Contractor Criticality Safety Program at DOE facilities. The effectiveness of the criticality safety program is dependent upon management implementing its roles and responsibilities to integrate criticality safety into work practices. This doc is an assessment tool.

342

DOE-STD-1160-2011  

Broader source: Energy.gov [DOE]

Occupational Safety Functional Area Qualification Standard The Occupational Safety technical functional area qualification standard (FAQS) establishes common functional area competency requirements for all DOE occupational safety personnel who provide assistance, or direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.

343

DOE-STD-1136-2009  

Broader source: Energy.gov [DOE]

Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities This Technical Standard (TS) provides operational guidance, practical lessons learned and experience gained, guides to good practice, and reference information on the safe handling of uranium.

344

DOE-STD-1151-2010  

Broader source: Energy.gov [DOE]

Facility Representative Functional Area Qualification Standard FACILITY REPRESENTATIVE DOE O 426.1, Federal Technical Capabilities, commits the Department to continuously strive for technical excellence. The Technical Qualification Program (TQP), along with the supporting technical qualification standards, complements the personnel processes that support the Department’s drive for technical excellence.

345

DOE-STD-1024-92  

Broader source: Energy.gov [DOE]

Guidelines for Use of Probabilistic Seismic Hazard Curves at Department of Energy Sites for Department of Energy Facilities Change Notice 1(January 1996) | Canceled Effective October 2001, due to FY 2001 Sunset Review The issue of the seismic hazard to be used in safety or risk assessments has recently been raised at a number of Department of Energy (DOE) facilities. One of the technical issues associated with this topic is the existence and use of two different methodologies for the development of seismic hazard curves by Lawrence Livermore National Laboratory (LLNL) and the Electric Power Research Institute (EPRI).

346

DOE-STD-101-92  

Broader source: Energy.gov [DOE]

Compilation of Nuclear Safety Criteria for Potential Application to DOE Nonreactor Nuclear Facilities Canceled, Effective October 2001, due to FY 2001 Sunset Review This guide is a compilation and source list of nuclear safety criteria primarily used by the Nuclear Regulatory Commission (NRC) and private industry in commercial NNFs. Because the DOE , in some areas of NNF design, construction, operation, and decommissioning has taken the lead in developing NNF criteria, the guide also includes criteria used by the DOE and DOE contractors.

347

DOE-STD-3014-2006  

Broader source: Energy.gov [DOE]

Accident Analysis for Aircraft Crash into Hazardous Facilities Reaffirmation May 2006 This standard provides the user with sufficient information to evaluate and assess the significance of aircraft crash risk on facility safety without expending excessive effort where it is not required.

348

DOE-STD-1162-2003  

Broader source: Energy.gov [DOE]

Instrumentation and Control Functional Area Qualification Standard The Instrumentation and Control Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy Instrumentation and Control personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities impacting the safe operation of defense nuclear facilities.

349

DOE-STD-1175-2013  

Broader source: Energy.gov [DOE]

Senior Technical Safety Manager Functional Area Qualification Standard The STSM FAQS establishes common functional area competency requirements for all DOE STSMs who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.

350

DOE-STD-1146-2007  

Broader source: Energy.gov [DOE]

General Technical Base Qualification Standard The General Technical Base Qualification Standard establishes common technical competency requirements for all DOE personnel who provide assistance in, direction or guidance to, or oversight or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.

351

DOE-STD-1166-2003  

Broader source: Energy.gov [DOE]

Deactivation and Decommission Functional Area Qualification Standard The Deactivation and Decommissioning Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities.

352

DOE-STD-1112-98  

Broader source: Energy.gov [DOE]

Laboratory Accreditation Program for Radiobioassay This technical standard describes the U.S. Department of Energy Laboratory Accreditation Program (DOELAP) for Radiobioassay, for use by the U.S. Department of Energy (DOE) and DOE Contractor radiobioassay programs.

353

DOE-STD-1628-2013  

Broader source: Energy.gov [DOE]

Development of Probabilistic Risk Assessments for Nuclear Safety Applications This document is the DOE Technical Standard entitled, “Development of Probabilistic Risk Assessments for Nuclear Safety Applications”.

354

Journal of Experimental Botany, Page 1 of 16 doi:10.1093/jxb/err025  

E-Print Network [OSTI]

necessary heavy metals like zinc (Zn) while avoiding potential toxicity. Poplar contains genes with sequence) RESEARCH PAPER Poplar maintains zinc homeostasis with heavy metal genes HMA4 and PCS1 Joshua P. Adams1 homology to genes HMA4 and PCS1 from other species which are involved in heavy metal regulation. While

dePamphilis, Claude

355

Abstract 2436: Regulation of breast cancer cell metabolism by the AMPK/ERR/PGC pathway  

Science Journals Connector (OSTI)

...Montreal, Quebec, Canada. Reprogramming of energy metabolism is now considered a hallmark of...links between two major pathways involved in energy metabolism in breast cancer cells: the energy sensor AMPK (AMP-activated protein kinase...

Étienne Audet-Walsh; David Papadopoli; Julie St-Pierre; Vincent Giguère

2014-10-01T23:59:59.000Z

356

Surveillance Guide - CMS 3.2 Change Control  

Broader source: Energy.gov (indexed) [DOE]

CHANGE CONTROL CHANGE CONTROL 1.0 Objective The objective of this surveillance is to evaluate how effectively the contractor controls changes in the facility. The Facility Representative reviews recent plant activities to determine if change has been appropriately managed, to verify that DOE requirements have been met, and to examine implementation of best practices. 2.0 References 2.1 DOE 4700.1, Project Management System 2.2 DOE 5700.6C, Quality Assurance 2.3 DOE-STD-1073-93, Guide for Operational Configuration Management 3.0 Requirements Implemented This surveillance is conducted to implement requirements CM-0009 and CM-0011 from the RL S/RID. These requirements are derived from DOE 4700.1. 4.0 Surveillance Activities This surveillance focuses on evaluating control over permanent

357

Activation of type 2 cannabinoid receptors (CB2R) promotes fatty acid oxidation through the SIRT1/PGC-1? pathway  

SciTech Connect (OSTI)

Highlights: •TC, a CB2R specific agonist, stimulates SIRT1 activity by PKA/CREB pathway. •TC promotes PGC-1? transcriptional activity by increasing its deacetylation. •TC increases the expression of genes linked to FAO and promotes the rate of FAO. •The effects of TC in FAO are dependent on CB2R. •Suggesting CB2R as a target to treat diseases with lipid dysregulation. -- Abstract: Abnormal fatty acid oxidation has been associated with obesity and type 2 diabetes. At the transcriptional level, peroxisome proliferator-activated receptor-gamma coactivator 1? (PGC-1?) has been reported to strongly increase the ability of hormone nuclear receptors PPAR? and ERR? to drive transcription of fatty acid oxidation enzymes. In this study, we report that a specific agonist of the type 2 cannabinoid receptor (CB2R) can lead to fatty acid oxidation through the PGC-1? pathway. We have found that CB2R is expressed in differentiated C2C12 myotubes, and that use of the specific agonist trans-caryophyllene (TC) stimulates sirtuin 1 (SIRT1) deacetylase activity by increasing the phosphorylation of cAMP response element-binding protein (CREB), thus leading to increased levels of PGC-1? deacetylation. This use of TC treatment increases the expression of genes linked to the fatty acid oxidation pathway in a SIRT1/PGC-1?-dependent mechanism and also drastically accelerates the rate of complete fatty acid oxidation in C2C12 myotubes, neither of which occur when CB2R mRNA is knocked down using siRNA. These results reveal that activation of CB2R by a selective agonist promotes lipid oxidation through a signaling/transcriptional pathway. Our findings imply that pharmacological manipulation of CB2R may provide therapeutic possibilities to treat metabolic diseases associated with lipid dysregulation.

Zheng, Xuqin [Department of Endocrinology, First Affiliated Hospital, Nanjing Medical University, Nanjing, Jiangsu Province 210029 (China)] [Department of Endocrinology, First Affiliated Hospital, Nanjing Medical University, Nanjing, Jiangsu Province 210029 (China); Sun, Tao [Department of Neurology, Jinling Hospital, Nanjing University School of Medicine, Nanjing, Jiangsu Province 210002 (China)] [Department of Neurology, Jinling Hospital, Nanjing University School of Medicine, Nanjing, Jiangsu Province 210002 (China); Wang, Xiaodong, E-mail: xdwang666@hotmail.com [Department of Endocrinology, First Affiliated Hospital, Nanjing Medical University, Nanjing, Jiangsu Province 210029 (China)] [Department of Endocrinology, First Affiliated Hospital, Nanjing Medical University, Nanjing, Jiangsu Province 210029 (China)

2013-07-05T23:59:59.000Z

358

2Q CY2005 (PDF), Facility Representative Program Performance Indicators  

Broader source: Energy.gov (indexed) [DOE]

2Q CY2005 (PDF), Facility Representative Program Performance 2Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report 2Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April to June 2005. Data for these indicators are gathered by Field elements quarterly per DOE-STD-1063-2000, Facility Representatives, and reported to Headquarters program offices for evaluation and feedback to improve the FR Program. As of June 30,2005, 97% of all FRs were fully qualified, down from 88% the previous quarter, but exceeding the DOE goal of 80%. Eighteen of 27 reporting sites meet the goal of FR qualifications. 2Q CY2005, Facility Representative Program Performance Indicators

359

2Q CY2006 (PDF), Facility Representative Program Performance Indicators  

Broader source: Energy.gov (indexed) [DOE]

2Q CY2006 (PDF), Facility Representative Program Performance 2Q CY2006 (PDF), Facility Representative Program Performance Indicators Quarterly Report 2Q CY2006 (PDF), Facility Representative Program Performance Indicators Quarterly Report Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April to June 2006. Data for these indicators are gathered by Field elements quarterly per DOE-STD-1063-2000, Facility Representatives and reported to Headquarters program offices for evaluation and feedback to improve the FR program. 2Q CY2006, Facility Representative Program Performance Indicators More Documents & Publications 3Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report 4Q CY2004 (PDF), Facility Representative Program Performance Indicators

360

2Q CY2003 (PDF), Facility Representative Program Performance Indicators  

Broader source: Energy.gov (indexed) [DOE]

2Q CY2003 (PDF), Facility Representative Program Performance 2Q CY2003 (PDF), Facility Representative Program Performance Indicators Quarterly Report 2Q CY2003 (PDF), Facility Representative Program Performance Indicators Quarterly Report Attached is the Facility Representative Program Performance Indicators (PIs) Quarterly Report Covering the Period from April to June 2003. Data for these indicators are gathered by Field elements Quarterly per DOE-STD-1063-2000, Facility Representatives, and reported to Headquarters program offices for evaluation and feedback in order to improve the facility Representative Program. A total of 13 Facility Representatives transferred to other positions during the quarter. Five of these accepted Facility Representative positions at other sites. Of the 8 that left the Program. 1 recieved a promotion and 7 accepted lateral positions. All of

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

2Q CY2002 (PDF), Facility Representative Program Performance Indicators  

Broader source: Energy.gov (indexed) [DOE]

2Q CY2002 (PDF), Facility Representative Program Performance 2Q CY2002 (PDF), Facility Representative Program Performance Indicators Quarterly Report 2Q CY2002 (PDF), Facility Representative Program Performance Indicators Quarterly Report The Facility Representive Program Performance Indicators (PIs) Quarterly Report is attached covering the period from April to June 2002. Data for these indicators are gathered by the Field elements quarterly per the Facility Representatives Standards , DOE-STD-1063-2000, and reported to Headquarters Program Offices for evaluation and feedback in order to improve the Facility Representative Program. The definition of the PIs from the Standard are also attached for your use in evaluating the data. Overall, the percentage of fully qualified Facility Representatives increased to 80% last quarter, from 78% the previous quarter , and

362

2Q CY2011 (PDF), Facility Representative Program Performance Indicators  

Broader source: Energy.gov (indexed) [DOE]

2Q CY2011 (PDF), Facility Representative Program Performance 2Q CY2011 (PDF), Facility Representative Program Performance Indicators Quarterly Report 2Q CY2011 (PDF), Facility Representative Program Performance Indicators Quarterly Report "This memorandum summarizes the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period April through June 20 1 1. Data for these indicators were gathered by Field Elements per Department of Energy (DOE) Technical Standard (STD) 1063-20 1 1, Facility Representatives, and reported to Headquarters Program Offices for evaluation and feedback to improve the FR Program. Highlights from this report: FR Staffing/Qualification/Oversight data DOE was staffed at 180 FR Full Time Equivalents (FTEs), which is 9 1 percent of the full staffing level (DOE goal is 100 percent).

363

2Q CY2004 (PDF), Facility Representative Program Performance Indicators  

Broader source: Energy.gov (indexed) [DOE]

2Q CY2004 (PDF), Facility Representative Program Performance 2Q CY2004 (PDF), Facility Representative Program Performance Indicators Quarterly Report 2Q CY2004 (PDF), Facility Representative Program Performance Indicators Quarterly Report Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report Covering the Period from April to June 2004. Data for these indicators are gathered by Field elements Quarterly per DOE-STD-1063-2000, Facility Representatives, and reported to Headquarters program offices for evaluation and feedback in order to improve the FR program. As of June 30, 2004, 89% of all FRs were fully qualified , exceeding the DOE goal of 80%, but down slightly from the previous quarter. Twenty of 28 reporting sites meet the goal for FR qualifications. Overall FR staffing is at 85% of the levels needed per the staffing

364

2Q CY2009 (PDF), Facility Representative Program Performance Indicators  

Broader source: Energy.gov (indexed) [DOE]

2Q CY2009 (PDF), Facility Representative Program Performance 2Q CY2009 (PDF), Facility Representative Program Performance Indicators Quarterly Report 2Q CY2009 (PDF), Facility Representative Program Performance Indicators Quarterly Report "Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April to June 2009. Data for these indicators are gathered by Field elements quarterly per DOE-STD- 1063-2006, Facility Representatives, and reported to Headquarters program offices for evaluation and feedback to improve the FR Program. A summary of this quarter's data concluded: 77% Fully Qualified (last quarter was 78%) 90% Staffing Level ( last Quarter was 90%); 45% Time Spent in the Field (DOE goal is>40%); and 73% Time Spent in Oversight Activites (DOE Goal is > 65%)"

365

Volume 2, Number 2, September 1998 The Continuum-of-Addiction: Cigarette Smoking in Relation to Price Among Americans  

E-Print Network [OSTI]

. The price elasticity of current smoking varied inversely with age: -0.831 (standard error 0.402) for ages 15.175) for ages 24­26; and -0.095 (st. err. 0.157) for ages 27­29. In response to higher prices, older youth were) among adolescents and young adults, the price-sensitivity of demand for cigarettes declines

Gabrieli, John

366

Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards and Labeling Programs for Clothes Washers, Water Dispensers, Vending Machines and CFLs  

E-Print Network [OSTI]

kWh/yr) ASHRAE Std. 32.1-2004 Solid/Opaque: 90 ± 2?F (32.2 ±ASHRAE Std. 32.1-2004 Indoor: 75 ± 2?F (23.9 ±1?C); Outdoor: 90

Fridley, David

2010-01-01T23:59:59.000Z

367

2Q CY2010 (PDF), Facility Representative Program Performance Indicators  

Broader source: Energy.gov (indexed) [DOE]

Q CY2010 (PDF), Facility Representative Program Performance Q CY2010 (PDF), Facility Representative Program Performance Indicators Quarterly Report 2Q CY2010 (PDF), Facility Representative Program Performance Indicators Quarterly Report This memorandum summarizes the highlight of, and announces the availablity on-line of, the Facility Representative (FR) Program Performance Indicators are gathered by Field elements quarterly per Department of Energy (DOE) Standard (STD)-1063-2006, Facility Representatives, and reported to Headquarters program offices for evaluation and feedback to improve the FR Program. This memorandum also announces that Mr. James Heffner has turned over FR Program Manager duties to Mr. Earl Huges. Mr. Heffner is assuming expanded team leader duties over several additional programs within the

368

2Q CY2007, Facility Representative Program Performance Indicators  

Broader source: Energy.gov (indexed) [DOE]

0,2007 0,2007 M E M 0 R A N D ; p s ' X Z FROM: M RK B. WHI DEPARTMENTAL REPRESENTATIVE TO THE DEFENSE NUCLEAR FACILITIES SAFETY BOARD OFFICE OF HEALTH, SAFETY AND SECURITY SUBJECT: Facility Representative Program Performance Indicators Quarterly Report, April - June (2nd Quarter CY2007) Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April to June 2007. Data for these indicators are gathered by Field elements quarterly per DOE-STD-1063-2006, Facility Representatives, and reported to Headquarters program offices for evaluation and feedback to improve the FR Program. A summary of this quarter's data concluded: 74% Fully Qualified (last Quarter was 72%) 94% Staffing Level (last Quarter was 9 1 %)

369

Surveillance Guide - OPS 9.2 Shift Routines and Operating Practices  

Broader source: Energy.gov (indexed) [DOE]

SHIFT ROUTINES AND OPERATING PRACTICES SHIFT ROUTINES AND OPERATING PRACTICES Objective The objective of this surveillance is to verify that standards for the professional conduct of operations personnel are established and followed so that operator performance meets the expectations of DOE and facility management. This surveillance provides a basis for evaluating watchstanding practices of operations personnel external to the control area in various plant locations. 2.0 References 2.1 DOE 5480.19, Conduct of Operations Requirements for DOE Facilities 2.2 DOE-STD-1041-93, Guide to Good Practices for Shift Routines and Operating Practices 3.0 Requirements Implemented This surveillance is conducted to implement requirements of the Functions, Responsibilities and Authorities Manual, Section 20,

370

The third analysis of cancer mortality among Japanese nuclear workers, 1991–2002:  

Science Journals Connector (OSTI)

The present study estimated excess relative risk per sievert (ERR/Sv) of cancer mortality among the cohort of 200?583 male Japanese nuclear workers, with an average individual cumulative dose of 12.2 mSv (

Suminori Akiba; Shoich Mizuno

2012-01-01T23:59:59.000Z

371

2  

Science Journals Connector (OSTI)

Ocean Atmosphere buoy, providing the longest time series of seawater CO2 data on a coral reef ..... Power spectra of atmospheric and oceanic parameters. (Fig.

2001-05-24T23:59:59.000Z

372

DOE performance indicators for 2nd quarter CY 1993  

SciTech Connect (OSTI)

The Department of Energy (DOE) has established a Department-wide Performance Indicator (PI) Program for trending and analysis of operational data as directed by DOE Order 5480.26. The PI Program was established to provide a means for monitoring the environment, safety, and health (ES&H) performance of the DOE at the Secretary and other management levels. This is the tenth in a series of quarterly reports generated for the Department of Energy Idaho Operations Office (DOE-ID) by EG&G Idaho, Inc. to meet the requirements of the PI Program as directed by the DOE Standard (DOE-STD-1048-92). The information in this tenth quarterly report, while contributing to a historical database for supporting future trending analysis, does not at this time provide a sound basis for developing trend-related conclusions. In the future, it is expected that trending and analysis of operational data will enhance the safety culture in both DOE and contractor organizations by providing an early warning of deteriorating environment, safety, and health conditions. DOE-STD-1048-92 identifies four general areas of PIs. They are: Personnel Safety, Operational Incidents, Environment, and Management. These four areas have been subdivided into 26 performance indicators. Approximately 115 performance indicator control and distribution charts comprise the body of this report. A brief summary of PIs contained in each of these general areas is provided. The four EG&G facilities whose performance is charted herein are as follows: (1) The Advanced Test Reactor (ATR), (2) The Radioactive Waste Management Complex (RWMC), (3) The Waste Experimental Reduction Facility (WERF), and (4) The Test Reactor Area (TRA) Hot Cells.

Not Available

1993-11-01T23:59:59.000Z

373

2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- SYSTEM DRAWINGS - SYSTEM DRAWINGS Figure A-1. APS Alternative Fuel Pilot Plant Facility Plan View Figure A-2. APS Alternative Pilot Plant Production Equipment Plan Figure A-3. APS Alternative Pilot Plant Production And Control Room Plan View Figure A-4. APS Alternative Pilot Plant Production Hydrogen System Piping and Instrument Diagram Figure A-5. APS Alternative Pilot Plant Production CNG System Piping and Instrument Diagram Appendix A - System Drawings: Page 1 Figure A-1. APS Alternative Fuel Pilot Plant Facility Plan View Appendix A - System Drawings: Page 2 Figure A-2. APS Alternative Pilot Plant Production Equipment Plan Appendix A - System Drawings: Page 4 Figure A-3. APS Alternative Pilot Plant Production And Control Room Plan View Appendix A - System Drawings: Page 6

374

2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Oil & Natural Gas Technology Oil & Natural Gas Technology DOE Award No.: ESD12-011 Topical Report Properties of Hydrate-Bearing Sediments Subjected to Changing Gas Compositions Submitted by: Timothy Kneafsey, Project PI Lawrence Berkeley National Laboratory 1 Cyclotron Road Berkeley, CA 94720 Prepared for: United States Department of Energy National Energy Technology Laboratory Submitted: 2/5/2013 August 7, 2012 Office of Fossil Energy 2 Behavior of methane hydrate when exposed to a 23% carbon dioxide -77% nitrogen gas under conditions similar to the ConocoPhillips 2012 IÄ¡nik Sikumi Gas Hydrate Field Trial Topical Report Timothy J. Kneafsey Seiji Nakagawa Sharon E. Borglin February 5, 2013 ESD12-011 Tasks 2.0 and 3.0 Lawrence Berkeley National Laboratory

375

2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

C - GASEOUS HYDROGEN PIPING SPECIFICATION C - GASEOUS HYDROGEN PIPING SPECIFICATION February 19, 2001, Rev. 0 C.1 GENERAL This specification provides guidelines for designing and installing the gaseous low-pressure (<275 psig) and high-pressure (276 to 7,000 psig) high-purity hydrogen process piping. For both low- and high- pressure, stainless steel (303, 304, 316) tubing, piping, fittings, and components are preferred. Piping systems should be designed and built to meet ANSI/ASME B31.3 for process piping. Specifications for the tubing are ASTM A269 TP 304 and 316. Maximum hardness is 80 Rb. C.2 MAXIMUM ALLOWABLE WORKING PRESSURE Maximum allowable working pressures (MAWP) for commercially available tubing and piping are given below. Piping systems must be designed so that the process pressure of the gas will not exceed the

376

2  

Broader source: Energy.gov (indexed) [DOE]

Fuel Cycle Subcommittee Fuel Cycle Subcommittee of the Nuclear Energy Advisory Committee December 9, 2010 Washington D.C. Burton Richter (Chairman) Darleane Hoffman Raymond Juzaitis Sekazi Mtingwa Ron Omberg Joy Rempe Dominique Warin 2 1. Introduction and Summary The Fuel Cycle Subcommittee (FCSC) of NEAC met in Washington, August 17- 19, 2010. DOE's new science-based approach to all matters related to nuclear energy is being implemented. The general approach was outlined to NEAC in the briefing on the NE Roadmap. There are many new directions being considered, and this meeting of the FCSC was to brief the Subcommittee on new directions in nuclear energy that might go beyond our present 4.5% enriched LWRs. The goal is to develop new concepts that have advantages over present systems in some combination of cost,

377

2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

G - COMPRESSED NATURAL GAS SYSTEM OPERATIONS G - COMPRESSED NATURAL GAS SYSTEM OPERATIONS Rev. 0, July 9, 2001 G.1 NORMAL STARTUP To conduct normal startup, proceed as follows: 1. Open the supply from Southwest Gas (V-101) and activate AOV-102. a. Open one filter (V-105/V-108 or V-109/V-112), with the other filter line closed and filter drains closed. b. Verify that the SWG supply pressure is 30 psi (PI 104 and PI 118). c. Verify that the blowdown filter is set to drain. 2. Open the by-pass supply to Gemini V-119 and V-18. 3. Gemini discharge valve configuration: a. Open V-19, -20, -20A. b. Valve into operation one set of coalescening filters: Open V-21 and V-22 and Close V-23 and V-24 Or Close V-21 and V-22 and Open V-23 and V-24. 4. Open V-25 at fill and dispenser cabinet 1. 5. Optional the booster blower or Hy-Bon compressor:

378

DOE-STD-1194-2011 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

October 02, 2013 October 02, 2013 Nuclear Materials Control and Accountability Change Notice 3 (October 2013) This document describes establishing and maintaining a Material Control and Accountability (MC&A) program, where each MC&A program element is a part of a quality MC&A program. Each site/facility operator needs to establish a sustainable, effective graded safeguards program for the control and accounting of nuclear materials to detect and deter theft and diversion, and to prevent the unauthorized control of a weapon, test device, or materials that can be used to make an improvised nuclear device. The MC&A program implements a defense-in-depth system to ensure that all accountable nuclear materials are in their authorized location and being used for their

379

DOE-STD-1181-2014 | Department of Energy  

Office of Environmental Management (EM)

nuclear facilities. This technical FAQS has been developed as a tool to assist DOE program and field offices in the development and implementation of the TQP in their...

380

DOE-STD-1207-2012 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

for Fixed Facilities More Documents & Publications Protective Force Protocols for ESS Supported Performance Tests and Exercises, March 12, 2007 FAQS Reference Guide -...

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

DOE-STD-1098-99; Radiological Control  

National Nuclear Security Administration (NNSA)

materials, such as pipelines, radioactive cribs, covered ponds, covered ditches, catch tanks, inactive burial grounds, and sites of known, covered, unplanned releases (spills)....

382

DOE-STD-5503-94 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

1996 EM Health and Safety Plan Guidelines Canceled, Effective October 2001, due to FY 2001 Sunset Review These guidelines have been developed by a working group consisting of both...

383

DOE-STD-5503-94 | Department of Energy  

Office of Environmental Management (EM)

2006 EM Health and Safety Plan Guidelines Canceled, Effective October 2001, due to FY 2001 Sunset Review These guidelines have been developed by a working group consisting of both...

384

DOE-STD-3028-2000 | Department of Energy  

Office of Environmental Management (EM)

Assessment EA-1488: Environmental Assessment for the U-233 Disposition, Medical Isotope Production, and Building 3019 Complex Shutdown at the Oak Ridge National Laboratory,...

385

DOE EPCA Commercial Refrigeration Standards - EERE-2010-BT-STD...  

Energy Savers [EERE]

We have a revolutionary product that is the only in the business that has built in Measurement & Verification (M&V). All other anti-sweat heater controls are old technology...

386

Ex Parte Communication, Docket EERE-2012-BT-STD-0022  

Broader source: Energy.gov [DOE]

On April 19, 2013, representatives from PJM Interconnection LLC and the National Rural Electric Cooperatives Association held a phone call with members of the Department of Energy’s General Counsel...

387

Ex Parte Communication, Docket EERE-2012-BT-STD-0022  

Broader source: Energy.gov [DOE]

On September 21, 2014, representatives from PJM, NRECA, and Ogilvy Government Relations (Parties) met with Department of Energy staff concerning the proposed rulemaking referenced in the subject...

388

DOE-STD-1058-93 | Department of Energy  

Office of Environmental Management (EM)

1995 Guide to Good Practices for Developing and Conducting Case Studies Replaced by DOE-HDBK-1116-98 This guide contains a method for learning fromexperience to prevent mistakes...

389

DOE-NE-STD-1004-92 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

& Publications Type B Investigation Board Report on the June 19, 1997, Occupational Illness at the Y-12 Plant, Oak Ridge, Tennessee DOE-HDBK-1208-2012 Inspection Report: IG-044...

390

DOE-STD-1153-2002 | Department of Energy  

Office of Environmental Management (EM)

Guidance for Preparation of the 2013 Department of Energy Annual Site Environmental Reports Order Module--DOE O 458.1, RADIATION PROTECTION OF THE PUBLIC AND THE ENVIRONMENT...

391

DOE-STD-3003-2000 | Department of Energy  

Office of Environmental Management (EM)

of this Standard is to document good engineering practices for the installation, testing, and maintenance of BACKUP POWER SOURCES at DOE facilities. The term "BACKUP POWER...

392

DOE-STD-1111-98 | Department of Energy  

Office of Environmental Management (EM)

procedures for administering DOELAP and acquiring accreditation. Specific performance testing requirements and site assessment criteria for accreditation are contained in:...

393

DOE-STD-3020-2005 | Department of Energy  

Office of Environmental Management (EM)

Supersedes DOE NE F3-45 (January 1987) This standard establishes specification and testing requirements for High Efficiency Particulate Air (HEPA) filters procured to provide...

394

DOE-STD-1090-2007 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Office of Scientific and Technical Information (OSTI) reclassified the manual as a handbook and it was issued as DOE Hoisting and Rigging Handbook (DOE-HDBK-1090-95). After...

395

DOE-STD-1031-92 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

direction for, Communications, Chapter IV of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. The practices in this guide should...

396

DOE-STD-1042-93 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

for, "Control Area Activities," Chapter III of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities."Control Area Activities" is an...

397

DOE-STD-1037-93 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Chemistry and Unique Processes, Chapter XIII of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. The practices in this guide should...

398

DOE-STD-1045-93 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

2001 "Notifications" and "Investigation of Abnormal Events" are elements of an effective Conduct of Operations program. The complexity and array of activities performed in DOE...

399

DOE-STD-1036-93 | Department of Energy  

Energy Savers [EERE]

with information that can be used to validate andor modify existing programs relative to Conduct of Operations. This Guide to Good Practices is part of a series of guides designed...

400

DOE-EM-STD-5505-96 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Operations Assessments Canceled, Effective October 2001, due to FY 2001 Sunset Review Conduct of operations includes those attitudes, processes, and precautions taken in the...

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

DOE-STD-1041-93 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

and Operating Practices," Chapter II of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. "Shift Routines and Operating...

402

DOE-STD-1040-93 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

for, Control of On-Shift Training, Chapter V of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. "Control of On-Shift Training" is...

403

DOE-STD-1054-93 | Department of Energy  

Office of Environmental Management (EM)

07, 1995 Guideline to Good Practices for Control and Calibration of Measuring and Test Equipment Canceled This guide is intended to assist facility maintenance operations in...

404

DOE-STD-1167-2003 | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

contaminants are not included in the National Institute for Occupational Safety and Health (NIOSH) certification process for respiratory protective devices. Therefore, with the...

405

DOE-STD-1112-98; Laboratory Accreditation Program  

Office of Environmental Management (EM)

assessment; and d) continuing applied research in areas of radiobioassay where there is a technology shortfall. DOE also expects the program to enhance cooperation and technical...

406

DOE-STD-1075-94 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Guides and Implementation Guides Canceled This standard establishes the style, format, content, and process for the preparing and issuing Department of Energy (DOE) guides. This...

407

DOE-STD-1195-2011 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

05, 2011 Design of Safety Significant Safety Instrumented Systems Used at DOE Non-Reactor Nuclear Facilities This standard provides requirements and guidance for the design,...

408

DOE-STD-3025-2007 | Department of Energy  

Office of Environmental Management (EM)

elements of a Department of Energy (DOE) program for quality assurance and performance testing of High Efficiency Particulate Air (HEPA) filters to be installed in DOE Nuclear...

409

DOE-STD-1083-2009 | Department of Energy  

Office of Environmental Management (EM)

June 29, 2009 Processing Exemptions to Nuclear Safety Rules and Approval of Alternative Methods for Documented Safety Analyses DOE may grant temporary or permanent...

410

DOE-STD-1107-97 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Protection Positions at DOE Facilities Reaffirmation With Errata Of Department Of Energy (DOE) Handbook, DOE-HDBK-1107-97, "Knowledge, Skills, And Abilities For Key Radiation...

411

Data:31ad0a32-c355-4594-a400-269daced2a9c | Open Energy Information  

Open Energy Info (EERE)

a32-c355-4594-a400-269daced2a9c a32-c355-4594-a400-269daced2a9c No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Bristol Virginia Utilities Effective date: 2013/08/01 End date if known: Rate name: Outdoor Lighting-Private Area Lighting-High Pressure Sodium 250 Watt - Summer Sector: Lighting Description: Source or reference: http://www.bvu-optinet.com/templates/default.php?purl=electric_main&turl=inside_3col_std_template.htm Source Parent: Comments Applicability Demand (kW) Minimum (kW): Maximum (kW): History (months): Energy (kWh) Minimum (kWh): Maximum (kWh): History (months): Service Voltage

412

Microsoft Word - Agenda for 9-2-10 DOE Mtg re EE of Fed Bldgs.doc  

Broader source: Energy.gov (indexed) [DOE]

Topic: Energy Efficiency and Sustainable Design of Federal Buildings Topic: Energy Efficiency and Sustainable Design of Federal Buildings Dockets: EE-RM/STD-02-112 / RIN: 1904-AC13, RIN: 1904-AB96 Date: September 2, 2010 Attendees: Tim Ballo and Emma Cheuse (Earthjustice); Kit Kennedy, Christine Chang, and Meg Waltner (Natural Resources Defense Council); Cliff Majersik (Institute for Market Transformation) Summary of Issues:  DOE leadership on building standards is urgently needed to address climate change. o DOE must meet all overdue legal responsibilities for the energy efficiency of Federal buildings, including list from DOE-EERE-OT-2010-0007-0071, e.g.:  Promulgate the overdue fossil-fuel reduction rule.

413

Technical Standards,DOE Standards and Corresponding Directives...  

Energy Savers [EERE]

More Documents & Publications Technical Standards, DOE Orders and Applicable CFRsDEAR Crosswalk - February 2, 2002 DOE-STD-1037-93 All Active DOE Technical Standards Document...

414

Safety Functions and Other Features of Remotely Operated Weapon Systems (ROWS)  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-1047-2008 DOE-STD-1047-2008 August 2008 DOE STANDARD Safety Functions and Other Features of Remotely Operated Weapon Systems (ROWS) U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE DOE-STD-1047-2008 TABLE OF CONTENTS FOREWORD ....................................................................................................................... i 1. SCOPE AND PURPOSE .........................................................................................1 2. APPLICABILITY ....................................................................................................1 3. NORMATIVE REFERENCES................................................................................2

415

Safety Functions and Other Features of Lethal Activated Denial Systems  

Broader source: Energy.gov (indexed) [DOE]

STD-1193-2010 STD-1193-2010 April 2010 DOE STANDARD Safety Functions and Other Features of Lethal Activated Denial Systems U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE DOE-STD-1193-2010 i TABLE OF CONTENTS FOREWORD ...................................................................................................................... ii 1. SCOPE AND PURPOSE .........................................................................................1 2. APPLICABILITY ....................................................................................................1 3. NORMATIVE REFERENCES ................................................................................2

416

Incidents of Security Concern  

Broader source: Energy.gov (indexed) [DOE]

NOT MEASUREMENT NOT MEASUREMENT SENSITIVE DOE-STD-1210-2012 September 2012 DOE STANDARD Incidents of Security Concern U.S. Department of Energy AREA SANS Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1210-2012 INTENTIONALLY BLANK DOE-STD-1210-2012 TABLE OF CONTENTS PARAGRAPH PAGE FOREWORD ................................................................................................................................ IV INCIDENTS OF SECURITY CONCERN......................................................................................1 1. SCOPE ....................................................................................................................................1 2. PURPOSE...............................................................................................................................1

417

Protection Programming Defensive Planning for Fixed Facilities  

Broader source: Energy.gov (indexed) [DOE]

NOT MEASUREMENT NOT MEASUREMENT SENSITIVE DOE STD-1207-2012 December 2012 DOE STANDARD Protection Program Defensive Planning For Fixed Facilities U.S. Department of Energy AREA SANS Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE STD-1207-2012 This Page Intentionally Left Blank ii DOE STD-1207-2012 TABLE OF CONTENTS FOREWORD..................................................................................................................................v PROTECTION PROGRAM DEFENSIVE PLANNING ..........................................................1 1. SCOPE............................................................................................................................ 1 2. PURPOSE. ..................................................................................................................... 1

418

Data:8e7795ed-d4c0-4bf8-8fa2-a93193a1cc4e | Open Energy Information  

Open Energy Info (EERE)

www.blueridgeemc.comuploadsmediapdfsRateSch20138-8REPSRenewEnerPortStdRider7-25-13.pdf Source Parent: http:www.blueridgeemc.comrate-schedules Comments...

419

Wireless Networking Projects Ashok K. Agrawala  

E-Print Network [OSTI]

677err 4243correct 4920total Training set = SET2 Nuzzer #12;Energy Efficient Routing EER #12;Energy portion of node energy ­ Noise Error Rate Retransmission Energy Consumption S D b a c 5 2 3 2 2 1 · To reduce energy consumption, we need reduce the number of retransmissions. · In ad hoc networks, paths

Gruner, Daniel S.

420

Approved DOE Technical Standards  

Broader source: Energy.gov (indexed) [DOE]

approved-doe-technical-standards Forrestal Building approved-doe-technical-standards Forrestal Building 1000 Independence Avenue, SW Washington, DC 205851.800.dial.DOE en DOE-STD-1150-2013 http://energy.gov/hss/downloads/doe-std-1150-2013 std-1150-2013" class="title-link">DOE-STD-1150-2013

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Radiological Control  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-1098-2008 October 2008 ------------------------------------- Change Notice 1 May 2009 DOE STANDARD RADIOLOGICAL CONTROL U.S. Department of Energy SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1098-2008 ii This document is available on the Department of Energy Technical Standards Program Website at http://www.standards.doe.gov/ iii DOE-STD-1098-2008 Change Notice 1: DOE-STD-1098-2008, Radiological Control Standard Section/page/paragraph Change Section 211, page 2-3, paragraph 1 Add new paragraph 1: "Approval by the appropriate Secretarial Officer or designee should be required

422

University of Florida College of Public Health & Health Professions  

E-Print Network [OSTI]

). Understanding Health Care Outcomes Research (2nd Edition). Sudbury, MA: Jones and Bartlett Publishers. #12;2 Suggested Readings Institute of Medicine. Committee on Quality of Health Care in America. 2000. To Err. Committee on Quality of Health Care in America. 2001. Crossing the Quality Chasm. Washington, DC: National

Kane, Andrew S.

423

November 28, 2  

Broader source: Energy.gov (indexed) [DOE]

RE: Ex Parte Communications in Connection with RE: Ex Parte Communications in Connection with Docket No's EERE-2010-BT-TP-0044 and EERE-2010-BT-STD-0043 Energy Conservation Program: Energy Conservation Standards and Test Procedures for HID Lamps To: expartecommunications@hq.doe.gov From: Alex Boesenberg, Manager of Regulatory Affairs National Electrical Manufacturers Association Date: August 30, 2013 This memorandum memorializes a communication involving NEMA Lamp Section members and DOE staff in connection with this proceeding. The National Electrical Manufacturers Association (NEMA) appreciates the opportunity to meet with the Department of Energy's staff regarding industry concerns for the HID Lamps Rulemakings on August 28, 2013. Attendees of the meeting were as follows: John Cymbalsky (DOE), Lucy deButts (DOE), Susan

424

A Methodology to Determine both the Technically Recoverable Resource and the Economically Recoverable Resource in an Unconventional Gas Play  

E-Print Network [OSTI]

generations of engineers and leaders of Saudi Arabia. vii NOMENCLATURE Bcf billion cubic feet CBM coalbed methane CDF cumulative distribution function DOE Department of Energy EIA Energy Information Administration ERR economically....2?Resource Triangle for Natural Gas. (Holditch, 2006) ................................... 4 1.3?Growth of US Technically Recoverable Natural Gas Resources. (EIA, 2010b...

Almadani, Husameddin Saleh A.

2010-10-12T23:59:59.000Z

425

Estrogen-related Receptor ? and Estrogen-related Receptor ? Associate with Unfavorable and Favorable Biomarkers, Respectively, in Human Breast Cancer  

Science Journals Connector (OSTI)

...Fishers exact, P 0.006; Kruskal-Wallis ANOVA, P 0.021). ERRa levels...normal mammary epithelial cells (Kruskal-Wallis ANOVA, P 0.001). ERR overexpression...were tested by the nonparametric Kruskal-Wallis ANOVA (Figs. 1 2 3) . Associations...

Eric A. Ariazi; Gary M. Clark; Janet E. Mertz

2002-11-15T23:59:59.000Z

426

DOE-STD-1073-93-Pt. 1; DOE Standard Guide for Operational Configuration Management Program  

Broader source: Energy.gov (indexed) [DOE]

85 85 CHAPTER 4 IMPLEMENTATION GUIDANCE FOR MATERIAL CONDITION AND AGING MANAGEMENT This guidance is appropriate for high-hazard facilities expected to operate for an extended period. Since DOE facilities vary in hazard level and circumstances of operation, a graded approach to implementation should be adopted. As shown in Figure 4-1, Material Condition and Aging Management (MCA) activities are developed and implemented in three distinct phases: a preliminary phase, a detailed or main phase, and an ongoing phase. The preliminary MCA phase includes activities necessary to estimate the facility remaining lifetime and to develop the MCA program plan. The detailed MCA phase builds on the preliminary estimate of facility remaining lifetime with more rigorous evaluations of aging degradation mechanisms

427

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

0 0 FORKLIFT TRUCKS 10-i Chapter 10 Forklift Trucks This chapter specifies operation, inspection, testing, and maintenance requirements for forklift trucks powered by internal-combustion engines or electric motors and implements the requirements of ASME B56.1 ("Safety Standard for powered Industrial Trucks - Low Lift and High lift Trucks") and B56.6 ("Rough Terrain Fork Lift Trucks"), and ANSI/UL 558 ("Internal-Combustion-Engine-Powered Industrial Trucks") and 583 ("Electric-Battery-Powered Industrial Trucks"). 10.1 GENERAL ...............................................................................................................................10-1 10.1.1 Operator Training/Qualification ................................................................................10-1

428

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

019-2004 019-2004 CHAPTER 16 MISCELLANEOUS LIFTING DEVICES 16-i Chapter 16 Miscellaneous Lifting Devices This chapter provides safety standards designated to sign verify, based on personal observations, certified records, or direct reports, that a specific action has been performed in accordance with specified requirements. For the operation, inspection, testing, and maintenance for miscellaneous lifting devices, (truck mounted cranes - capacity 1 ton or less not covered in ASME B30.5 ("Mobile and Locomotive Cranes") and implements the requirements of ASME PALD ("Portable Automotive Lifting Devices") for self contained shop cranes. 16.1 GENERAL ..................................................................................................................................

429

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

4 4 BELOW-THE-HOOK LIFTING DEVICES 14-i Chapter 14 Below-the-Hook Lifting Devices This chapter provides the requirements for below-the-hook lifting devices used in hoisting and rigging, such as spreader bars, lifting yokes, and lift fixtures. This section implements the requirements of ASME B30.20, "Below-the-Hook Lifting Devices." NOTE: Special lifting devices for shipping containers weighing 10,000 lb or more that are used for radioactive materials may be governed by ANSI N14.6 ["Standard for Special Lifting Devices for Shipping Containers Weighing 10,000 Pounds (4,500 kg) or More for Nuclear Materials."] 14.1 GENERAL ...............................................................................................................................14-1

430

DOE-STD-1073-93-Pt. 1; DOE Standard Guide for Operational Configuration Management Program  

Broader source: Energy.gov (indexed) [DOE]

61 61 CHAPTER 3 IMPLEMENTATION GUIDANCE FOR DESIGN RECONSTITUTION This guidance is appropriate for high-hazard facilities expected to operate for an extended period. Since DOE facilities vary in hazard level and circumstances of operation, a graded approach to implementation should be adopted. The implementation guidance is presented in the general sequence in which the design reconstitution (DR) adjunct program is expected to be developed and implemented. Figure 3-1 presents the top- level flowchart for the DR adjunct program. 3.1 PROGRAM PLANS AND PROCEDURES 3.1.1 DESIGN RECONSTITUTION PROGRAM PLAN The DR program plan should address the topics defined in program criterion 1.3.1.1.c. It should be prepared in accordance with direction set forth by the program management element of the CM

431

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

APPENDIX A PROCUREMENT GUIDELINES A-1 Appendix A Procurement Guidelines This appendix provides reference guidance in preparing purchase requisitions for hoisting and rigging materials and equipment. Nationally recognized standards and specifications are referenced for listed items. However, caution should be used prior to procurement of special items in order to verify appropriate specification or standard reference and requirements. Some specific requirements listed in this appendix are more restrictive than consensus standard requirements, but are recommended to ensure materials of adequate quality and workmanship are provided. Quality receipt inspections should be provided for all received materials in order to verify compliance of all

432

DOE-STD-1090-2007; Hoisting and Rigging Standard (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

0 0 FORKLIFT TRUCKS 10-i This chapter specifies operation, inspection, testing, and maintenance requirements for forklift trucks powered by internal-combustion engines or electric motors and implements the requirements of ANSI/ITSDF B56.1 ("Safety Standard for powered Industrial Trucks - Low Lift and High lift Trucks") and ANSI/ITSDF B56.6 ("Rough Terrain Fork Lift Trucks"), and ANSI/UL 558 ("Internal-Combustion- Engine-Powered Industrial Trucks") and ANSI/UL 583 ("Electric-Battery-Powered Industrial Trucks"). 10.1 GENERAL ...............................................................................................................................10-1 10.1.1 Operator Training/Qualification ................................................................................10-1

433

J1272-1 Std_Tal_L4_Package_Mini Final Report  

Office of Legacy Management (LM)

Pages have been deleted from this laboratory report file to reduce file size. The Pages have been deleted from this laboratory report file to reduce file size. The deleted pages contain raw data and instrument calibrations. If the full laboratory report is needed, contact Jack.Craig.@lm.doe.gov. ANALYTICAL REPORT Job Number: 280-1272-1 SDG Number: 10022892 Job Description: PINELLAS MONITORING For: S.M. Stoller Corporation 2597 B 3/4 Road Grand Junction, CO 81503 Attention: Mr. Steve Donivan _____________________________________________ Approved for release. Kae E Yoder Project Manager II 4/1/2010 12:52 PM Kae E Yoder Project Manager II kae.yoder@testamericainc.com 04/01/2010 The test results in this report relate only to the samples in this report and meet all requirements of NELAC, with any exceptions noted. Pursuant to NELAP, this report shall not be reproduced except in full, without the written approval of

434

MEMORANDUM RE: Ex Parte Communications in Connection with Docket No. EERE-2010-BT-STD-0027  

Broader source: Energy.gov (indexed) [DOE]

May 21, 2013 May 21, 2013 Encl: Motor Coalition Presentation This memorandum memorializes a communication involving members of the Motor Coalition (industry and energy advocates) in connection with this proceeding. The Motor Coalition thanks the DOE for permitting us to meet with you on May 13 th , 2013 to discuss the Motor Coalition Petition for Direct Final Rule and the related Rulemaking for Electric Motor performance standards, which is the subject of the above docket number. Attendees of the May 13 th meeting were as follows: John Cymbalsky (DOE), Ashley Armstrong (DOE), Matthew Nardotti (Navigant), John Malinowski (Baldor), Emmanuel Agammloh (Advanced Energy), Kit Butler(Advanced Energy), Michael Kido (DOE), Jim Raba (DOE), Roger Daugherty (Baldor), Neal Elliott (ACEEE), Rob Boteler (Nidec), Michael Rivest (Navigant), Ami

435

DOE-STD-1090-2007; Hoisting and Rigging Standard (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

APPENDIX A APPENDIX A PROCUREMENT GUIDELINES A-i Appendix A Procurement Guidelines This appendix provides reference guidance in preparing purchase requisitions for hoisting and rigging materials and equipment. Nationally recognized standards and specifications are referenced for listed items. However, caution should be used prior to procurement of special items in order to verify appropriate specification or standard reference and requirements. Some specific requirements listed in this appendix are more restrictive than consensus standard requirements, but are recommended to ensure materials of adequate quality and workmanship are provided. Quality receipt inspections should be provided for all received materials in order to verify compliance of all

436

MEMORANDUM RE: Ex Parte Communications in Connection with Docket No. EERE-2010-BT-STD-0027  

Broader source: Energy.gov (indexed) [DOE]

July 15, 2013 July 15, 2013 Encl: Motor Training Presentation This memorandum memorializes a communication between DOE staff and members of the NEMA Motor and Generator Section in connection with this proceeding. NEMA thanks the DOE for the opportunity to conduct training for DOE staff and its consultants on July 15 th , 2013 which illustrated the different types of motors, motor construction theory and motor applications by type. It is our hope that better understanding of motor types and construction will assist the Department and its consultants with the discharge of their duties. Attendees of the July 15 th meeting were as follows: Ashley Armstrong (DOE), Ami Grace-Tardy (DOE), Laura Barhydt (DOE), Michael Kido (DOE), Pamela Costello (Navigant), Lucas Adin

437

DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

TERMINOLOGY AND DEFINITIONS 1-1 Chapter 1 Terminology and Definitions The following are specialized terms commonly used when discussing hoisting and rigging operations. Many may not be used in this standard, but are included for general information. The terms are arranged in alphabetical order. Illustrations are included for clarity. ABRASION: Surface wear. ACCELERATION STRESS: Additional stress imposed due to increasing load velocity. ALTERNATE LAY: Lay of wire rope in which the strands are alternately regular and lang lay. ANSI: American National Standards Institute. APPOINTED: Assigned specific responsibilities by the employer or the employer's representative. AREA, METALLIC: Sum of the cross- sectional areas of individual wires in a wire rope

438

DOE-STD-0100T; DOE Standard Licensed Reactor Nuclear Safety Criteria Applicable to DOE Reactors  

Broader source: Energy.gov (indexed) [DOE]

00T 00T November 1993 Superseding DOE/NE-0100T April 1991 DOE STANDARD LICENSED REACTOR NUCLEAR SAFETY CRITERIA APPLICABLE TO DOE REACTORS U.S. Department of Energy Washington, D.C. 20585 AREA SAFT DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly frorn the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE94005221 CONTENTS

439

DOE-STD-1120-2005; Integration of Environment, Safety, and Health...  

Office of Environmental Management (EM)

State, and local programs. Clean Water Act (CWA) * Sets forth requirements for regulating point source and nonpoint source discharges into surface waters and requires the...

440

Intern experience at International Business Machines Corporation, STD/Austin: an internship report  

E-Print Network [OSTI]

not have been possible. My gratitude goes to Dr. Alan Alter, Dr. C. F. Kettleborough, and Dr. W. D. Turner for providing me with financial support, guidance and friendship during my years at Texas A&M University. My appreciation goes to Mr. Jack Fisher... ............................................ 6 D - THE MANUFACTURING PROCESS ..................................... 9 CHAPTER III - INTERNSHIP DESCRIPTION ................................ 15 A - OVERVIEW. ......................................................... 15 B - WORK POSITION...

Tayar, Emile J. (Emile Joseph), 1954-

2013-03-13T23:59:59.000Z

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Ex Parte Communications, Docket Number EERE–2008–BT–STD–0005, RIN 1904–AB57  

Broader source: Energy.gov [DOE]

On Monday, June 11, 2012, representatives from Lester Electrical and Ingersoll Rand met with DOE to discuss the Notice of Proposed Rulemaking (NOPR) for Energy Conservation Standards for Battery...

442

DOE EPCA Commercial Refrigeration Standards- EERE-2010-BT-STD-0003 / (RIN) 1904-AC19  

Broader source: Energy.gov [DOE]

In today’s call we discussed the new CRE proposed standard and how ControlTec anti-sweat controls can help meet those standards without sacrificing equipment performance or integrity. We have a...

443

DOE-STD-1044-93 CN-1; Guide to Good Practices for Equipment and...  

Office of Environmental Management (EM)

distribution and lighting panels C Emergency equipment (fire alarm stations, eye wash stations, etc.) C Equipment components (motors, valves, pumps, etc.) C Equipment...

444

Revisions to the Facility Safety Order and DOE?STD?1066  

Broader source: Energy.gov [DOE]

Presenter: Jim Bisker, Fire Protection Program Manager, Office of Health, Safety and Security (HS?32)

445

Ex Parte Communication Docket Number EERE-2008-BT-STD-005 | Department...  

Energy Savers [EERE]

Discussion: Philips staff asked a series of questions regarding the application of the test procedure and the proposed standard for class I inductive charge battery chargers....

446

DOE-STD-1061-93; DOE Standard Guide to Good Practices For the...  

Office of Environmental Management (EM)

framework for the selection, training, qualification, and professional development of reactor facility and non-reactor nuclear facility shift supervisors. Training and...

447

DOE-DP-STD-3016-99; DOE Limited Standard Hazard Analysis Reports...  

Office of Environmental Management (EM)

modes and effects analysis, fault tree and event tree analysis, and human reliability analysis. In many cases, a combination of these techniques should be employed for the NEO HA....

448

Ex Parte Communications, Docket Number EERE-2008-BT-STD-0005...  

Energy Savers [EERE]

RIN 1904-AB57 On Monday, June 11, 2012, representatives from Lester Electrical and Ingersoll Rand met with DOE to discuss the Notice of Proposed Rulemaking (NOPR)...

449

DOE-STD-1153-2002; A Graded Approach for Evaluating Radiation...  

National Nuclear Security Administration (NNSA)

ways: * A single contaminated area may be completely covered by a single habitat patch (Figure 4.1 (a)). In this case, the contaminated area bounds the assessment area. An...

450

DOE-STD-1023-95; Natural Phenomena Hazards Assessment Criteria  

National Nuclear Security Administration (NNSA)

DBFL - Design Basis Flood DOE - Department of Energy ES&H - Environment, Safety, and Health EPRI - Electric Power Research Institute FEMA - Federal Emergency Management Agency...

451

DOE-STD-1090-2007; Hoisting and Rigging Standard (Formerly Hoisting and Rigging Manual)  

Broader source: Energy.gov (indexed) [DOE]

TERMINOLOGY AND DEFINITIONS 1-1 Chapter 1 Terminology and Definitions The following are specialized terms commonly used when discussing hoisting and rigging operations. Many may not be used in this standard, but are included for general information. The terms are arranged in alphabetical order. Illustrations are included for clarity. ABRASION: Surface wear. ACCELERATION STRESS: Additional stress imposed due to increasing load velocity. ALTERNATE LAY: Lay of wire rope in which the strands are alternately regular and lang lay. ANSI: American National Standards Institute. APPOINTED: Assigned specific responsibilities by the employer or the employer's representative. AREA, METALLIC: Sum of the cross- sectional areas of individual wires in a wire rope

452

Thermal and Oxidative Degradation of Castor Oil Biodiesel  

Science Journals Connector (OSTI)

Thermal and Oxidative Degradation of Castor Oil Biodiesel ... The neat biodiesels, 20% blends, and the base fuel (No. 2 diesel) were tested at 2 different loads (100 and 20%) and 3 injection timings (3° advanced, std., 3° retarded). ...

Marta M. Conceição; Valter J. Fernandes, Jr.; Antonio S. Araújo; Mirna F. Farias; Ieda M. G. Santos; Antonio G. Souza

2007-03-23T23:59:59.000Z

453

Safety Software Quality Assurance Functional Area Qualification Standard  

Broader source: Energy.gov (indexed) [DOE]

2-2011 2-2011 March 2011 DOE STANDARD SAFETY SOFTWARE QUALITY ASSURANCE FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1172-2011 ii This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ DOE-STD-1172-2011 INTENTIONALLY BLANK DOE-STD-1172-2011 TABLE OF CONTENTS APPROVAL ............................................................................................................................... iii ACKNOWLEDGMENT ................................................................................................................ i

454

Modeling CO{sub 2}-Brine-Rock Interaction Including Mercury and H{sub 2}S Impurities in the Context of CO{sub 2} Geologic Storage  

SciTech Connect (OSTI)

This study uses modeling and simulation approaches to investigate the impacts on injectivity of trace amounts of mercury (Hg) in a carbon dioxide (CO{sub 2}) stream injected for geologic carbon sequestration in a sandstone reservoir at ~2.5 km depth. At the range of Hg concentrations expected (7-190 ppbV, or ~ 0.06-1.6 mg/std.m{sup 3}CO{sub 2}), the total volumetric plugging that could occur due to complete condensation of Hg, or due to complete precipitation of Hg as cinnabar, results in a very small porosity change. In addition, Hg concentration much higher than the concentrations considered here would be required for Hg condensation to even occur. Concentration of aqueous Hg by water evaporation into CO{sub 2} is also unlikely because the higher volatility of Hg relative to H{sub 2}O at reservoir conditions prevents the Hg concentration from increasing in groundwater as dry CO{sub 2} sweeps through, volatilizing both H{sub 2}O and Hg. Using a model-derived aqueous solution to represent the formation water, batch reactive geochemical modeling show that the reaction of the formation water with the CO{sub 2}-Hg mixture causes the pH to drop to about 4.7 and then become buffered near 5.2 upon reaction with the sediments, with a negligible net volume change from mineral dissolution and precipitation. Cinnabar (HgS(s)) is found to be thermodynamically stable as soon as the Hg-bearing CO{sub 2} reacts with the formation water which contains small amounts of dissolved sulfide. Liquid mercury (Hg(l)) is not found to be thermodynamically stable at any point during the simulation. Two-dimensional radial reactive transport simulations of CO{sub 2} injection at a rate of 14.8 kg/s into a 400 m-thick formation at isothermal conditions of 106°C and average pressure near 215 bar, with varying amounts of Hg and H{sub 2}S trace gases, show generally that porosity changes only by about ±0.05% (absolute, i.e., new porosity = initial porosity ±0.0005) with Hg predicted to readily precipitate from the CO{sub 2} as cinnabar in a zone mostly matching the single-phase CO{sub 2} plume. The precipitation of minerals other than cinnabar, however, dominates the evolution of porosity. Main reactions include the replacement of primarily Fe-chlorite by siderite, of calcite by dolomite, and of K-feldspar by muscovite. Chalcedony is also predicted to precipitate from the dissolution of feldspars and quartz. Although the range of predicted porosity change is quite small, the amount of dissolution and precipitation predicted for these individual minerals is not negligible. These reactive transport simulations assume that Hg gas behaves ideally. To examine effects of non-ideality on these simulations, approximate calculations of the fugacity coefficient of Hg in CO{sub 2} were made. Results suggest that Hg condensation could be significantly overestimated when assuming ideal gas behavior, making our simulation results conservative with respect to impacts on injectivity. The effect of pressure on Henry’s constant for Hg is estimated to yield Hg solubilities about 10% lower than when this effect is not considered, a change that is considered too small to affect the conclusions of this report. Although all results in this study are based on relatively mature data and modeling approaches, in the absence of experimental data and more detailed site-specific information, it is not possible to fully validate the results and conclusions.

Spycher, N.; Oldenburg, C.M.

2014-01-01T23:59:59.000Z

455

Data:A193f29f-3d8f-4722-b411-17e0d8406bb2 | Open Energy Information  

Open Energy Info (EERE)

3f29f-3d8f-4722-b411-17e0d8406bb2 3f29f-3d8f-4722-b411-17e0d8406bb2 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Indianapolis Power & Light Co Effective date: 2011/03/15 End date if known: Rate name: MU-1 - a1c - 175 watt MV - Washington Post Std. Sector: Lighting Description: Lamps in enclosed post top type fixtures, mounted on metal or fiberglass ornamental columns and supplied from underground circuits. APPLICABILITY: For Street and Traffic Lighting of public streets, parkways, improved alleys, boulevards, drives, bridges, parking areas, or other public places by Cities or Towns or by individuals, groups of individuals, associations and other than incorporated municipalities; and lighting of public parks, drives, bridges, parking areas or other public places by only Cities or Towns where there is a prospect that the capital expenditure is warranted. The capital expenditure will be warranted if the amount of revenue received in sixty (60) months exceeds the estimated cost of installation for the lights as calculated by the Company. If the 60-month revenue does not exceed the cost of installation, the Customer must pay two and one-half (2½) times the difference of the cost of installation and the 60-month revenue prior to installation of the lighting. The terms, prices and provisions of this rate schedule shall be applicable to a consolidated city of the first class only to the extent not inconsistent with the specifications, terms, prices and provisions in contracts which may be entered into by such city pursuant to I.C. § 36-9-9-1, et. seq.

456

Data:Bed43de6-1013-4ad2-b40b-68cf5a45e541 | Open Energy Information  

Open Energy Info (EERE)

Bed43de6-1013-4ad2-b40b-68cf5a45e541 Bed43de6-1013-4ad2-b40b-68cf5a45e541 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Indianapolis Power & Light Co Effective date: 2011/03/15 End date if known: Rate name: MU-1 - a1c - 150 watt HPS - Washington Post Std. Sector: Lighting Description: Lamps in enclosed post top type fixtures, mounted on metal or fiberglass ornamental columns and supplied from underground circuits. APPLICABILITY: For Street and Traffic Lighting of public streets, parkways, improved alleys, boulevards, drives, bridges, parking areas, or other public places by Cities or Towns or by individuals, groups of individuals, associations and other than incorporated municipalities; and lighting of public parks, drives, bridges, parking areas or other public places by only Cities or Towns where there is a prospect that the capital expenditure is warranted. The capital expenditure will be warranted if the amount of revenue received in sixty (60) months exceeds the estimated cost of installation for the lights as calculated by the Company. If the 60-month revenue does not exceed the cost of installation, the Customer must pay two and one-half (2½) times the difference of the cost of installation and the 60-month revenue prior to installation of the lighting. The terms, prices and provisions of this rate schedule shall be applicable to a consolidated city of the first class only to the extent not inconsistent with the specifications, terms, prices and provisions in contracts which may be entered into by such city pursuant to I.C. § 36-9-9-1, et. seq.

457

DirectivesInvokingReferencingTechnicalStandards-3-13-2013.xlsx  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Analysis Techniques for Compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports DOE-STD-7501-99, The DOE Corporate Lessons Learned Program DOE O 232.2, Occurrence...

458

E-Print Network 3.0 - af forbrug og Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

de nationale og inter- nationale EU- og EFP-stttede aktivite- ter for off... sekunders vind- std er p basis af 2 rs mledata bereg- net til ... Source: Ris National...

459

Data:40d2b8fd-74c0-4db9-b319-bdaeecc6863f | Open Energy Information  

Open Energy Info (EERE)

b8fd-74c0-4db9-b319-bdaeecc6863f b8fd-74c0-4db9-b319-bdaeecc6863f No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2. Demand 3. Energy << Previous 1 2 3 Next >> Basic Information Utility name: Indianapolis Power & Light Co Effective date: 2011/03/15 End date if known: Rate name: MU-1 - a1c - 100 watt HPS - Post Std. Sector: Lighting Description: Lamps in enclosed post top type fixtures, mounted on metal or fiberglass ornamental columns and supplied from underground circuits. APPLICABILITY: For Street and Traffic Lighting of public streets, parkways, improved alleys, boulevards, drives, bridges, parking areas, or other public places by Cities or Towns or by individuals, groups of individuals, associations and other than incorporated municipalities; and lighting of public parks, drives, bridges, parking areas or other public places by only Cities or Towns where there is a prospect that the capital expenditure is warranted. The capital expenditure will be warranted if the amount of revenue received in sixty (60) months exceeds the estimated cost of installation for the lights as calculated by the Company. If the 60-month revenue does not exceed the cost of installation, the Customer must pay two and one-half (2½) times the difference of the cost of installation and the 60-month revenue prior to installation of the lighting. The terms, prices and provisions of this rate schedule shall be applicable to a consolidated city of the first class only to the extent not inconsistent with the specifications, terms, prices and provisions in contracts which may be entered into by such city pursuant to I.C. § 36-9-9-1, et. seq.

460

BEAMLINE 2-2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 2 CURRENT STATUS: Open with limited support SUPPORTED TECHNIQUES: White light station MAIN SCIENTIFIC DISCIPLINES: X-ray optics characterization and development % TIME GENERAL USE: 100% SCHEDULING: Proposal Submittal and Scheduling Procedures Current SPEAR and Beam Line Schedules SOURCE: Bend Magnet Side Station BEAM LINE SPECIFICATIONS: energy range resolution DE/E spot size flux angular acceptance unfocused 1000-40000 eV NA 4.0 x 8.0 mm NA 0.4 mrad OPTICS: None MONOCHROMATOR: None (white beam) ABSORPTION: 673 microns Be, 12.4 meters He, 15.2 microns C INSTRUMENTATION: X-Y stages, ion chambers, PMT DATA ACQUISITION AND ANALYSIS: SPEC For questions and issues related to SPEC, contact beam line staff or send an email to M$SPEC@ssrl.slac.stanford.edu SUPER

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Nuclear Materials Control and Accountability  

Broader source: Energy.gov (indexed) [DOE]

June 2011 June 2011 DOE STANDARD Nuclear Materials Control and Accountability U.S. Department of Energy AREA SANS Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1194-2011 i This page is intentionally left blank. DOE-STD-1194-2011 ii TABLE OF CONTENTS FOREWORD ..................................................................................................................................................................................... iii 1 . S C O P E ........................................................................................................................................................................................... 1 2

462

Illness and Injury Surveillance Program Guidelines  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-1190-2007 DOE-STD-1190-2007 DOE STANDARD ILLNESS AND INJURY SURVEILLANCE PROGRAM GUIDELINES U.S. Department of Energy AREA OCSH Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE DOE-STD-1190-2007 Available on the Department of Energy Technical Standards Program Web site at http://tis.eh.doe.gov/techstds/ DOE-STD-1190-2007 Foreword 1. Use of this standard is not mandatory. Users should review the document and determine if it meets their purpose. 2. Comments (recommendations, additions, and deletions) that may be of use in improving this document should be addressed to: U.S. Department of Energy, Office of Health, c/o Dr. Cliff

463

Facility Representatives  

Broader source: Energy.gov (indexed) [DOE]

DOE-STD-1063-2006 April 2006 Superseding DOE-STD-1063-2000 March 2000 DOE STANDARD FACILITY REPRESENTATIVES U.S. Department of Energy AREA MGMT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE DOE-STD-1063-2006 ii Available on the Department of Energy Technical Standards Program web site at http://www.eh.doe.gov/techstds/ DOE-STD-1063-2006 iii FOREWORD 1. This Department of Energy standard is approved for use by all DOE Components. 2. The revision to this DOE standard was developed by a working group consisting of headquarters and field participants. Beneficial comments (recommendations, additions, deletions) and any pertinent data that may improve this document should

464

(1) a2 = b2 + c2 ?2bccos? (2)  

E-Print Network [OSTI]

At 2:00 PM, a ship leaves port and travels N40°E at the rate of 30 mph. Another ship leaves the same port at 3:00 PM, and travels N75°W at the rate of 20 mph.

charlotb

2010-07-02T23:59:59.000Z

465

Order Module--DOE O 151.1C, COMPREHENSIVE EMERGENCY MANAGEMENT...  

Office of Environmental Management (EM)

Management DOE-STD-1151-2002, Facility Representative DOE-STD-1137-2007, Fire Protection Engineering DOE-STD-1138-2007, Industrial Hygiene DOE-STD-1150-2002, Quality Assurance...

466

DOE-STD-1153-2002; A Graded Approach for Evaluating Radiation Doses to Aquatic and Terrestrial Biota  

Broader source: Energy.gov (indexed) [DOE]

M3-19 M3-19 3 Equations and Models for Calculating Dose to Biota and Deriving BCGs Based on the potential pathways of exposure, BCGs were derived for surface water, sediment, and soil. Calculated using conservative assumptions, the BCGs are intended to preclude the relevant biota from being exposed to radiation levels in excess of established or recommended biota dose limits. Determination of compliance with the dose limits requires that all organism- relevant environmental media be evaluated at the same time. This is done by using the "sum of fractions" approach commonly used in evaluating radionuclide discharges to the environment. 3.1 An Important Note on Estimating Internal Tissue Concentrations for Use in Dose Equations: The Lumped Parameter For most radionuclides, the single most important predictor of biota dose is the method used to estimate internal tissue concentrations.

467

Urgent Action on Energy Conservation Standards for Residential Water Heaters (Docket Number: EERE-2012-BT-STD-0022)  

Broader source: Energy.gov [DOE]

I am submitting this letter on behalf of PJM Interconnection, the electric grid operator for 13 states and the District of Columbia serving over 60 million people.  As part of a coalition which...

468

Appendix 2  

E-Print Network [OSTI]

Errors of steps 1, 5, 10: 0.0052, 0.0382, 0.1245, approximately. 19. (error 0.0093), ... y0ekt ? 2y0, ek ? 2 (1 week), e2k ? 22 (2 weeks), e4k ? 24 y ? x arctan (x3 ...

469

() 2 () 3  

E-Print Network [OSTI]

RNF8 HR DNA DNA PARP-BRCA synthetic lethality PARP DNA HR BRCA1 BRCA2 HR PARP;3 DNA 4 DNA DNA DNA DNA DNA DNA DNA NHEJ DNA DNA HR 2 DNA DNA DNA topic DNA DNA DNA DNA DNA DNA DNA ATM - 2007 ATM DNA E3 RNF8 Lys 63-linked

Takada, Shoji

470

Assignment 2  

E-Print Network [OSTI]

(See Figure 2 and the following chart, where the results of other stretching ... For instance, in order to get the graph of y = 2 cos x we multiply the y-coordinate of each ..... the average brightness (or magnitude) of the star is 4.0, and its brightness ...

471

ch_2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

10 10 Background 2.2 High-Level Waste Overview 2.2.1 HIGH-LEVEL WASTE DESCRIPTION According to Section 2(12) of the Nuclear Waste Policy Act (42 USC 10101), high-level radioac- tive waste means: In July 1999, DOE issued Order 435.1 Radioactive Waste Management. This Order and its associated Manual and Guidance set forth the authorities, responsibilities, and requirements for the management of DOE's inventory of HLW, transuranic waste, and low-level waste. Specific to HLW, DOE uses the Nuclear Waste Policy Act definition but has jurisdictional authority consistent with existing law to deter- mine if the waste requires permanent isolation as the appropriate disposal mechanism. This authority is based on enabling legislation in the Atomic Energy Act, sections 202(3) and 202(4)

472

Beamline 12.2.2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2.2 2.2 Beamline 12.2.2 Print Tuesday, 20 October 2009 09:31 High-Pressure (California High-Pressure Science Observatory: Calipso) Endstations: Medium pressure High pressure laser heating GENERAL BEAMLINE INFORMATION Operational Yes Proposal cycle Proposals for General Sciences Beamlines (6-month cycle) Source characteristics Superbend magnet, 1.9GeV, 5.29Tesla, 500mA Monochromator Si(111) or Multilayer Energy range 6-40 keV for Si(111), 14-28 keV for Multilayer Resolving power (E/ΔE) Si(111) = 7000, Multilayer =100 Beam size (HxV) Focused: 10 x 10 micron Unfocused: 90 x 100 micron Scientific applications High-pressure science Scientific disciplines Earth sciences, materials science, construction materials, chemistry, energy. Endstations Medium pressure High pressure laser heating

473

Beamline 12.2.2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Beamline 12.2.2 Beamline 12.2.2 Beamline 12.2.2 Print Tuesday, 20 October 2009 09:31 High-Pressure (California High-Pressure Science Observatory: Calipso) Endstations: Medium pressure High pressure laser heating GENERAL BEAMLINE INFORMATION Operational Yes Proposal cycle Proposals for General Sciences Beamlines (6-month cycle) Source characteristics Superbend magnet, 1.9GeV, 5.29Tesla, 500mA Monochromator Si(111) or Multilayer Energy range 6-40 keV for Si(111), 14-28 keV for Multilayer Resolving power (E/ΔE) Si(111) = 7000, Multilayer =100 Beam size (HxV) Focused: 10 x 10 micron Unfocused: 90 x 100 micron Scientific applications High-pressure science Scientific disciplines Earth sciences, materials science, construction materials, chemistry, energy. Endstations Medium pressure

474

Beamline 12.2.2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2.2 Print 2.2 Print High-Pressure (California High-Pressure Science Observatory: Calipso) Endstations: Medium pressure High pressure laser heating GENERAL BEAMLINE INFORMATION Operational Yes Proposal cycle Proposals for General Sciences Beamlines (6-month cycle) Source characteristics Superbend magnet, 1.9GeV, 5.29Tesla, 500mA Monochromator Si(111) or Multilayer Energy range 6-40 keV for Si(111), 14-28 keV for Multilayer Resolving power (E/ΔE) Si(111) = 7000, Multilayer =100 Beam size (HxV) Focused: 10 x 10 micron Unfocused: 90 x 100 micron Scientific applications High-pressure science Scientific disciplines Earth sciences, materials science, construction materials, chemistry, energy. Endstations Medium pressure High pressure laser heating Experimental techniques High pressure, diffraction, x-ray imaging, XAS, laser heating

475

Beamline 12.2.2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2.2 Print 2.2 Print High-Pressure (California High-Pressure Science Observatory: Calipso) Endstations: Medium pressure High pressure laser heating GENERAL BEAMLINE INFORMATION Operational Yes Proposal cycle Proposals for General Sciences Beamlines (6-month cycle) Source characteristics Superbend magnet, 1.9GeV, 5.29Tesla, 500mA Monochromator Si(111) or Multilayer Energy range 6-40 keV for Si(111), 14-28 keV for Multilayer Resolving power (E/ΔE) Si(111) = 7000, Multilayer =100 Beam size (HxV) Focused: 10 x 10 micron Unfocused: 90 x 100 micron Scientific applications High-pressure science Scientific disciplines Earth sciences, materials science, construction materials, chemistry, energy. Endstations Medium pressure High pressure laser heating Experimental techniques High pressure, diffraction, x-ray imaging, XAS, laser heating

476

Beamline 12.2.2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2.2 Print 2.2 Print High-Pressure (California High-Pressure Science Observatory: Calipso) Endstations: Medium pressure High pressure laser heating GENERAL BEAMLINE INFORMATION Operational Yes Proposal cycle Proposals for General Sciences Beamlines (6-month cycle) Source characteristics Superbend magnet, 1.9GeV, 5.29Tesla, 500mA Monochromator Si(111) or Multilayer Energy range 6-40 keV for Si(111), 14-28 keV for Multilayer Resolving power (E/ΔE) Si(111) = 7000, Multilayer =100 Beam size (HxV) Focused: 10 x 10 micron Unfocused: 90 x 100 micron Scientific applications High-pressure science Scientific disciplines Earth sciences, materials science, construction materials, chemistry, energy. Endstations Medium pressure High pressure laser heating Experimental techniques High pressure, diffraction, x-ray imaging, XAS, laser heating

477

Beamline 12.2.2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2.2 Print 2.2 Print High-Pressure (California High-Pressure Science Observatory: Calipso) Endstations: Medium pressure High pressure laser heating GENERAL BEAMLINE INFORMATION Operational Yes Proposal cycle Proposals for General Sciences Beamlines (6-month cycle) Source characteristics Superbend magnet, 1.9GeV, 5.29Tesla, 500mA Monochromator Si(111) or Multilayer Energy range 6-40 keV for Si(111), 14-28 keV for Multilayer Resolving power (E/ΔE) Si(111) = 7000, Multilayer =100 Beam size (HxV) Focused: 10 x 10 micron Unfocused: 90 x 100 micron Scientific applications High-pressure science Scientific disciplines Earth sciences, materials science, construction materials, chemistry, energy. Endstations Medium pressure High pressure laser heating Experimental techniques High pressure, diffraction, x-ray imaging, XAS, laser heating

478

Beamline 12.2.2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2.2 Print 2.2 Print High-Pressure (California High-Pressure Science Observatory: Calipso) Endstations: Medium pressure High pressure laser heating GENERAL BEAMLINE INFORMATION Operational Yes Proposal cycle Proposals for General Sciences Beamlines (6-month cycle) Source characteristics Superbend magnet, 1.9GeV, 5.29Tesla, 500mA Monochromator Si(111) or Multilayer Energy range 6-40 keV for Si(111), 14-28 keV for Multilayer Resolving power (E/ΔE) Si(111) = 7000, Multilayer =100 Beam size (HxV) Focused: 10 x 10 micron Unfocused: 90 x 100 micron Scientific applications High-pressure science Scientific disciplines Earth sciences, materials science, construction materials, chemistry, energy. Endstations Medium pressure High pressure laser heating Experimental techniques High pressure, diffraction, x-ray imaging, XAS, laser heating

479

Beamline 12.2.2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2.2 Print 2.2 Print High-Pressure (California High-Pressure Science Observatory: Calipso) Endstations: Medium pressure High pressure laser heating GENERAL BEAMLINE INFORMATION Operational Yes Proposal cycle Proposals for General Sciences Beamlines (6-month cycle) Source characteristics Superbend magnet, 1.9GeV, 5.29Tesla, 500mA Monochromator Si(111) or Multilayer Energy range 6-40 keV for Si(111), 14-28 keV for Multilayer Resolving power (E/ΔE) Si(111) = 7000, Multilayer =100 Beam size (HxV) Focused: 10 x 10 micron Unfocused: 90 x 100 micron Scientific applications High-pressure science Scientific disciplines Earth sciences, materials science, construction materials, chemistry, energy. Endstations Medium pressure High pressure laser heating Experimental techniques High pressure, diffraction, x-ray imaging, XAS, laser heating

480

Beamline 12.2.2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2.2 Print 2.2 Print High-Pressure (California High-Pressure Science Observatory: Calipso) Endstations: Medium pressure High pressure laser heating GENERAL BEAMLINE INFORMATION Operational Yes Proposal cycle Proposals for General Sciences Beamlines (6-month cycle) Source characteristics Superbend magnet, 1.9GeV, 5.29Tesla, 500mA Monochromator Si(111) or Multilayer Energy range 6-40 keV for Si(111), 14-28 keV for Multilayer Resolving power (E/ΔE) Si(111) = 7000, Multilayer =100 Beam size (HxV) Focused: 10 x 10 micron Unfocused: 90 x 100 micron Scientific applications High-pressure science Scientific disciplines Earth sciences, materials science, construction materials, chemistry, energy. Endstations Medium pressure High pressure laser heating Experimental techniques High pressure, diffraction, x-ray imaging, XAS, laser heating

Note: This page contains sample records for the topic "2 std err" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Beamline 12.2.2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2.2 Print 2.2 Print High-Pressure (California High-Pressure Science Observatory: Calipso) Endstations: Medium pressure High pressure laser heating GENERAL BEAMLINE INFORMATION Operational Yes Proposal cycle Proposals for General Sciences Beamlines (6-month cycle) Source characteristics Superbend magnet, 1.9GeV, 5.29Tesla, 500mA Monochromator Si(111) or Multilayer Energy range 6-40 keV for Si(111), 14-28 keV for Multilayer Resolving power (E/ΔE) Si(111) = 7000, Multilayer =100 Beam size (HxV) Focused: 10 x 10 micron Unfocused: 90 x 100 micron Scientific applications High-pressure science Scientific disciplines Earth sciences, materials science, construction materials, chemistry, energy. Endstations Medium pressure High pressure laser heating Experimental techniques High pressure, diffraction, x-ray imaging, XAS, laser heating

482

August 2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 2 August 2 Attending: Eric, Jay, Craig, JeffA, JeffP, Marjorie Utilization: Cluster mostly full, some free cycles on the weekends. Mostly STAR jobs but quite a lot of groups have been running some. Recent Outages: Nothing major in the past two weeks. Upcoming Downtimes: We will schedule something soon probably for the week of 8/15. Probably an eight hour downtime to complete the /common migration as well as redo some network cabling related to the problems a few weeks ago (borrowed cable from network group). Procurements/New Hardware: Requisition will go out today or tomorrow at the latest. Mostly we're getting nodes but also some networking equipment and miscellaneous as well as a second dtn. ATLAS, STAR, ALICE and dayabay were sent a spreadsheet detailing what the new shares will be. They will

483

Beamline 8.2.2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 Print 2 Print Berkeley Center for Structural Biology (BCSB) Multiple-Wavelength Anomalous Diffraction (MAD) and Macromolecular Crystallography (MX) GENERAL BEAMLINE INFORMATION Operational Yes Proposal cycle Proposals for Structural Biology Beamlines (2-month cycle) Source characteristics Superbend (5.0 T, single pole) Energy range 5-16 keV Monochromator Double crystal, Si(111) Measured flux (1.9 GeV, 400 mA) 3.0 x 1011 photons/sec Resolving power (E/ΔE) 7,000 Divergence (max at sample) 3.0(h) x 0.5(v) mrad Measured spot size at sample (FWHM) 100 µm Endstations Minihutch Detectors 3x3 CCD array (ADSC Q315) Sample format Single crystals of biological molecules Sample preparation Support labs available Sample environment Ambient or ~100 K Special notes Computers for data processing and analysis are available

484

Beamline 8.2.2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 Print 2 Print Berkeley Center for Structural Biology (BCSB) Multiple-Wavelength Anomalous Diffraction (MAD) and Macromolecular Crystallography (MX) GENERAL BEAMLINE INFORMATION Operational Yes Proposal cycle Proposals for Structural Biology Beamlines (2-month cycle) Source characteristics Superbend (5.0 T, single pole) Energy range 5-16 keV Monochromator Double crystal, Si(111) Measured flux (1.9 GeV, 400 mA) 3.0 x 1011 photons/sec Resolving power (E/ΔE) 7,000 Divergence (max at sample) 3.0(h) x 0.5(v) mrad Measured spot size at sample (FWHM) 100 µm Endstations Minihutch Detectors 3x3 CCD array (ADSC Q315) Sample format Single crystals of biological molecules Sample preparation Support labs available Sample environment Ambient or ~100 K Special notes Computers for data processing and analysis are available

485

Beamline 8.2.2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 Print 2 Print Berkeley Center for Structural Biology (BCSB) Multiple-Wavelength Anomalous Diffraction (MAD) and Macromolecular Crystallography (MX) GENERAL BEAMLINE INFORMATION Operational Yes Proposal cycle Proposals for Structural Biology Beamlines (2-month cycle) Source characteristics Superbend (5.0 T, single pole) Energy range 5-16 keV Monochromator Double crystal, Si(111) Measured flux (1.9 GeV, 400 mA) 3.0 x 1011 photons/sec Resolving power (E/ΔE) 7,000 Divergence (max at sample) 3.0(h) x 0.5(v) mrad Measured spot size at sample (FWHM) 100 µm Endstations Minihutch Detectors 3x3 CCD array (ADSC Q315) Sample format Single crystals of biological molecules Sample preparation Support labs available Sample environment Ambient or ~100 K Special notes Computers for data processing and analysis are available

486

Beamline 8.2.2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 Print 2 Print Berkeley Center for Structural Biology (BCSB) Multiple-Wavelength Anomalous Diffraction (MAD) and Macromolecular Crystallography (MX) GENERAL BEAMLINE INFORMATION Operational Yes Proposal cycle Proposals for Structural Biology Beamlines (2-month cycle) Source characteristics Superbend (5.0 T, single pole) Energy range 5-16 keV Monochromator Double crystal, Si(111) Measured flux (1.9 GeV, 400 mA) 3.0 x 1011 photons/sec Resolving power (E/ΔE) 7,000 Divergence (max at sample) 3.0(h) x 0.5(v) mrad Measured spot size at sample (FWHM) 100 µm Endstations Minihutch Detectors 3x3 CCD array (ADSC Q315) Sample format Single crystals of biological molecules Sample preparation Support labs available Sample environment Ambient or ~100 K Special notes Computers for data processing and analysis are available

487

Beamline 8.2.2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 Print 2 Print Berkeley Center for Structural Biology (BCSB) Multiple-Wavelength Anomalous Diffraction (MAD) and Macromolecular Crystallography (MX) GENERAL BEAMLINE INFORMATION Operational Yes Proposal cycle Proposals for Structural Biology Beamlines (2-month cycle) Source characteristics Superbend (5.0 T, single pole) Energy range 5-16 keV Monochromator Double crystal, Si(111) Measured flux (1.9 GeV, 400 mA) 3.0 x 1011 photons/sec Resolving power (E/ΔE) 7,000 Divergence (max at sample) 3.0(h) x 0.5(v) mrad Measured spot size at sample (FWHM) 100 µm Endstations Minihutch Detectors 3x3 CCD array (ADSC Q315) Sample format Single crystals of biological molecules Sample preparation Support labs available Sample environment Ambient or ~100 K Special notes Computers for data processing and analysis are available

488

Beamline 8.2.2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 Print 2 Print Berkeley Center for Structural Biology (BCSB) Multiple-Wavelength Anomalous Diffraction (MAD) and Macromolecular Crystallography (MX) GENERAL BEAMLINE INFORMATION Operational Yes Proposal cycle Proposals for Structural Biology Beamlines (2-month cycle) Source characteristics Superbend (5.0 T, single pole) Energy range 5-16 keV Monochromator Double crystal, Si(111) Measured flux (1.9 GeV, 400 mA) 3.0 x 1011 photons/sec Resolving power (E/ΔE) 7,000 Divergence (max at sample) 3.0(h) x 0.5(v) mrad Measured spot size at sample (FWHM) 100 µm Endstations Minihutch Detectors 3x3 CCD array (ADSC Q315) Sample format Single crystals of biological molecules Sample preparation Support labs available Sample environment Ambient or ~100 K Special notes Computers for data processing and analysis are available

489

Beamline 8.2.2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 Print 2 Print Berkeley Center for Structural Biology (BCSB) Multiple-Wavelength Anomalous Diffraction (MAD) and Macromolecular Crystallography (MX) GENERAL BEAMLINE INFORMATION Operational Yes Proposal cycle Proposals for Structural Biology Beamlines (2-month cycle) Source characteristics Superbend (5.0 T, single pole) Energy range 5-16 keV Monochromator Double crystal, Si(111) Measured flux (1.9 GeV, 400 mA) 3.0 x 1011 photons/sec Resolving power (E/ΔE) 7,000 Divergence (max at sample) 3.0(h) x 0.5(v) mrad Measured spot size at sample (FWHM) 100 µm Endstations Minihutch Detectors 3x3 CCD array (ADSC Q315) Sample format Single crystals of biological molecules Sample preparation Support labs available Sample environment Ambient or ~100 K Special notes Computers for data processing and analysis are available

490

Beamline 8.2.2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 Print 2 Print Berkeley Center for Structural Biology (BCSB) Multiple-Wavelength Anomalous Diffraction (MAD) and Macromolecular Crystallography (MX) GENERAL BEAMLINE INFORMATION Operational Yes Proposal cycle Proposals for Structural Biology Beamlines (2-month cycle) Source characteristics Superbend (5.0 T, single pole) Energy range 5-16 keV Monochromator Double crystal, Si(111) Measured flux (1.9 GeV, 400 mA) 3.0 x 1011 photons/sec Resolving power (E/ΔE) 7,000 Divergence (max at sample) 3.0(h) x 0.5(v) mrad Measured spot size at sample (FWHM) 100 µm Endstations Minihutch Detectors 3x3 CCD array (ADSC Q315) Sample format Single crystals of biological molecules Sample preparation Support labs available Sample environment Ambient or ~100 K Special notes Computers for data processing and analysis are available

491

2.PDF  

Broader source: Energy.gov (indexed) [DOE]

OPM 7 OPM 7 Appendix 2 THE DIRECTOR EXECUTIVE OFFICE OF THE PRESIDENT OFFICE OF MANAGEMENT AND BUDGET WASHINGTON, D.C. 20503 April 19, 1993 BULLETIN NO. 93-11 TO THE HEADS OF EXECUTIVE DEPARTMENTS AND ESTABLISHMENTS SUBJECT: Fiscal Responsibility and Reducing Perquisites 1 . P u r p o s e . This Bulletin provides guidance and instructions to agencies concerning implementation of the F e b r u a r y 10, 1993 Presidential memorandum on "Use of Government Vehicles," "Restricted Use of Government Aircraft," and "Government Fiscal Responsibility and Reducing Perquisites." 2 . Background . O n F r i d a y F e b r u a r y 1 0 , 1 9 9 3 t h e P r e s i d e n t s i g n e d three memoranda to Executive Departments instructing them to curtail use of Government vehicles, government aircraft,

492

Section 2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Figure 1. Box plots of differences of 2-minute aver- Figure 1. Box plots of differences of 2-minute aver- ages of TB and PWV for non-precipitating conditions. The box encloses 50% of the data; the line inside the box indicates the median. The vertical lines enclose 100% of the data; the circles above and below indicate statistical outliers. The outliers are due to broken cloud fields transiting the radiometers' fields of view at slightly different times. The Liebe-87 model was used to predict the TB at the ARM frequencies from those measured with the ETL radiometer. A Comparison of Integrated Water Vapor Sensors: WVIOP-96 J. C. Liljegren Pacific Northwest National Laboratory Richland, Washington E. R. Westwater and Y. Han NOAA/Cooperative Institute for Research in the Environmental Sciences (CIRES) University of Colorado

493

Untitled-2  

Broader source: Energy.gov (indexed) [DOE]

3 3 Visit us at http://energy.gov/lm/ Welcome to the July-September 2013 issue of the U.S. Department of Energy (DOE) Office of Legacy Management (LM) Program Update. This publication is designed to provide a status of activities within LM. Please direct all comments and inquiries to . lm@hq.doe.gov Program Update Legacy Management Continued on page 2 Inside this Update: LM Work Progresses on Defense-Related

494

P-2  

Office of Legacy Management (LM)

P-2 P-2 7~ \k 29 ' 9 1 11:34 IJ.S EPFI 26 FED.PLK% .,' p-ji-j= Q UNITED STATES El$ViRONMENTAL PROTECTION A6iZNCY ~ RESION II JAC+ i, JAW78 FEDl!RAL BUILDING ', NW YORK. NEW YORK 10278 March,29,,1991' - ' Mr. Joseph A/Kelly 201 East 66th Street. New York, New York 10021 Re: Documents Available et Radium Chemical Company,. 60-06 27th Avenue, woodaide, Queens County, New York Dear Mr. Kelly: I have attempted to reach.youby telephone on several occasion& over.the past two veeks to give you an update on the availability of your personal papers r@maining in the referenced facility. Your personal papers and documents (such as your military records) are now availabliz at the facility. You had stated in an earlier conversation thatfit would be more convenient for you to pick up these documents in Woo.dside as opposed to our offices in

495

Graduates 0 2 3 2 2 1 2 2 1 1 2 Percent of Graduates with  

E-Print Network [OSTI]

D Completions and Placement, Ten Year Trend 2002-2003 to 2011-2012 French and Italian Placement Category As of 4/2/2013 #12;12 Number of Grads with Placement Info French and Italian, PhD Graduates First First Placement Category by Broad Field Category 77% 14% 18% 60% 11% 68% 36% 18% 3% 13% 42% 11% 3% 4% 7

Grzybowski, Bartosz A.

496

fixed2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Part Deux Part Deux Painless Physics Articles BEAM COOLING August 2, 1996 By Leila Belkora, Office of Public Affairs ACCELERATION August 16, 1996 By Dave Finley, Accelerator Division Head RF August 30, 1996 By Pat Colestock, Accelerator Division FIXED TARGET PHYSICS September 20, 1996 By Peter H. Garbincius, Physics Section FIXED TARGET PHYSICS PART DEUX October 16, 1996 By Peter H. Garbincius, Physics Section and Leila Belkora, Office of Public Affaris CROSS SECTION November 1, 1996 By Doreen Wackeroth, Theoretical Physics Edited by Leila Belkora, Office of Public Affaris MAGNETS PART I November 15, 1996 By Hank Glass, Technical Support Section Edited by Donald Sena, Office of Public Affairs MAGNETS PART II January 10, 1997 By Hank Glass, Technical Support Section Edited by Donald Sena, Office of Public Affairs

497

Untitled-2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

APRIL 2003 APRIL 2003 DOE/FE-0452 INTEGRATED DRY NO X /SO 2 EMISSIONS CONTROL SYSTEM PUBLIC SERVICE COMPANY OF COLORADO Disclaimer This report was prepared using publicly available information, including the Final Technical Report and other reports prepared pursuant to a cooperative agreement with the U.S. Department of Energy. Neither the United States Government nor any agency, employee, contractor, or representative thereof, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe upon privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer,

498

ch_2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

4 4 Background 2.1.3 CURRENT MISSION The current INEEL mission is to develop, demonstrate, and deploy advanced engineering technology and systems to improve national competitiveness and security, to make the pro- duction and use of energy more efficient, and to improve the quality of the environment. Areas of primary emphasis at INEEL include waste management and waste minimization, environ- mental engineering and restoration, energy effi- ciency, renewable energy, national security and defense, nuclear technologies, and advanced technologies and methods. INEEL is the lead laboratory for the National Spent Nuclear Fuel Management Program, which sets standards for developing and maintaining the capability to safely manage DOE's spent nuclear fuel. DOE considers the Environmental Management

499

MA.2  

Office of Legacy Management (LM)

IS .:,I. ;' IS .:,I. ;' MA.2 0 y-AU Mr. M ichael Matt W a tertown Redevelopment Authority 319 Arlington Street W a tertown, Massachusetts 02172 Dear Mr. Matt: The Department of Energy is evaluating the radiological condition of sites that were utilized under the Manhattan Engineer District and/or the Atomic Energy C o m m ission in the early years of nuclear energy development to determine whether they need remedial action and whether the Department has authority to perform such action. As you know from information previously sent to you, portions of the W a tertown Arsenal in W a tertown, Massachusetts, were identified as possible sites. The areas investigated included those areas which were the sites of Buildings 34, 41, and 421 and the GSA site. The enclosed documents, which represent the Department's review of the

500

magnets2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

II II Painless Physics Articles BEAM COOLING August 2, 1996 By Leila Belkora, Office of Public Affairs ACCELERATION August 16, 1996 By Dave Finley, Accelerator Division Head RF August 30, 1996 By Pat Colestock, Accelerator Division FIXED TARGET PHYSICS September 20, 1996 By Peter H. Garbincius, Physics Section FIXED TARGET PHYSICS PART DEUX October 16, 1996 By Peter H. Garbincius, Physics Section and Leila Belkora, Office of Public Affaris CROSS SECTION November 1, 1996 By Doreen Wackeroth, Theoretical Physics Edited by Leila Belkora, Office of Public Affaris MAGNETS PART I November 15, 1996 By Hank Glass, Technical Support Section Edited by Donald Sena, Office of Public Affairs MAGNETS PART II January 10, 1997 By Hank Glass, Technical Support Section Edited by Donald Sena, Office of Public Affairs