Powered by Deep Web Technologies
Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Federal Offshore--Gulf of Mexico Natural Gas Extraction Loss...  

Annual Energy Outlook 2012 (EIA)

Pages: Extraction Loss of Natural Gas at Processing Plants (Summary) Federal Offshore Gulf of Mexico Natural Gas Plant Processing Extraction Loss of Natural Gas at...

2

South Dakota Natural Gas Extraction Loss (Million Cubic Feet...  

U.S. Energy Information Administration (EIA) Indexed Site

View History: Annual Download Data (XLS File) South Dakota Natural Gas Extraction Loss (Million Cubic Feet) South Dakota Natural Gas Extraction Loss (Million Cubic Feet) Decade...

3

Extraction Loss of Natural Gas at Processing Plants (Summary...  

Annual Energy Outlook 2012 (EIA)

Extraction Loss Period: Monthly Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Data Series Area...

4

Extracting physically interpretable data from electron energy-loss spectra.  

SciTech Connect

Principal component analysis is routinely applied to analyze data sets in electron energy-loss spectroscopy (EELS). We show how physically meaningful spectra can be obtained from the principal components using a knowledge of the scattering of the probe electron and the geometry of the experiment. This approach is illustrated by application to EELS data for the carbon K edge in graphite obtained using a conventional transmission electron microscope. The effect of scattering of the probe electron is accounted for, yielding spectra which are equivalent to experiments using linearly polarized X-rays. The approach is general and can also be applied to EELS in the context of scanning transmission electron microscopy.

Witte, C.; Zaluzec, N. J.; Allen, L. J.; Materials Science Division; Univ. of Melbourn

2010-10-30T23:59:59.000Z

5

Illinois Natural Gas Plant Processing  

Annual Energy Outlook 2012 (EIA)

242 235 233 164 5,393 15,727 1967-2011 Total Liquids Extracted (Thousand Barrels) 37 38 33 24 231 705 1983-2011 Extraction Loss (Million Cubic Feet) 47 48 42 31 345 1,043...

6

The extraction of nuclear sea quark distribution and energy loss effect in Drell-Yan experiment  

E-Print Network (OSTI)

The next-to-leading order and leading order analysis are performed on the differential cross section ratio from Drell-Yan process. It is found that the effect of next-to-leading order corrections can be negligible on the differential cross section ratios as a function of the quark momentum fraction in the beam proton and the target nuclei for the current Fermilab and future lower beam proton energy. The nuclear Drell-Yan reaction is an ideal tool to study the energy loss of the fast quark moving through cold nuclei. In the leading order analysis, the theoretical results with quark energy loss are in good agreement with the Fermilab E866 experimental data on the Drell-Yan differential cross section ratios as a function of the momentum fraction of the target parton. It is shown that the quark energy loss effect has significant impact on the Drell-Yan differential cross section ratios. The nuclear Drell-Yan experiment at current Fermilab and future lower energy proton beam can not provide us with more information on the nuclear sea quark distribution.

Chun-Gui Duan; Na Liu; Zhan-Yuan Yan

2006-09-06T23:59:59.000Z

7

The influence of quark energy loss on extracting nuclear sea quark distribution from nuclear Drell-Yan experimental data  

E-Print Network (OSTI)

By means of two typical kinds of quark energy loss parametrization and the nuclear parton distributions determined only with lepton-nuclear deep inelastic scattering experimental data, a leading order analysis are performed on the proton-induced Drell-Yan differential cross section ratios of tungsten versus deuterium as a function of the quark momentum fraction in the beam proton and target nuclei. It is found that the theoretical results with quark energy loss are in good agreement with the experimental data. The quark energy loss effect produce approximately 3% to 11% suppression on the Drell-Yan differential cross section ratios $R_{W/D}$ in the range $0.05\\leq x_2\\leq0.3$. The application of nuclear Drell-Yan data with heavy targets is remarkably subject to difficulty in the constraints of the nuclear sea-quark distribution.

Chun-Gui, Duan

2008-01-01T23:59:59.000Z

8

The influence of quark energy loss on extracting nuclear sea quark distribution from nuclear Drell-Yan experimental data  

E-Print Network (OSTI)

By means of two typical kinds of quark energy loss parametrization and the nuclear parton distributions determined only with lepton-nuclear deep inelastic scattering experimental data, a leading order analysis are performed on the proton-induced Drell-Yan differential cross section ratios of tungsten versus deuterium as a function of the quark momentum fraction in the beam proton and target nuclei. It is found that the theoretical results with quark energy loss are in good agreement with the experimental data. The quark energy loss effect produce approximately 3% to 11% suppression on the Drell-Yan differential cross section ratios $R_{W/D}$ in the range $0.05\\leq x_2\\leq0.3$. The application of nuclear Drell-Yan data with heavy targets is remarkably subject to difficulty in the constraints of the nuclear sea-quark distribution.

Duan Chun-Gui; Liu Na

2008-09-28T23:59:59.000Z

9

Utah Natural Gas Plant Processing  

Gasoline and Diesel Fuel Update (EIA)

93,836 195,701 202,380 412,639 454,832 490,233 1967-2011 Total Liquids Extracted (Thousand Barrels) 2,418 2,241 2,643 6,527 7,648 10,805 1983-2011 Extraction Loss (Million Cubic...

10

California Natural Gas Plant Processing  

Annual Energy Outlook 2012 (EIA)

223,580 206,239 195,272 198,213 204,327 180,648 1967-2011 Total Liquids Extracted (Thousand Barrels) 11,267 11,388 11,179 11,042 10,400 9,831 1983-2011 Extraction Loss (Million...

11

Michigan Natural Gas Plant Processing  

Gasoline and Diesel Fuel Update (EIA)

33,213 29,436 30,008 23,819 22,405 21,518 1967-2011 Total Liquids Extracted (Thousand Barrels) 2,335 2,547 2,840 2,409 2,207 2,132 1983-2011 Extraction Loss (Million Cubic Feet)...

12

Colorado Natural Gas Plant Processing  

Gasoline and Diesel Fuel Update (EIA)

751,036 888,705 1,029,641 1,233,260 1,434,003 1,507,467 1967-2011 Total Liquids Extracted (Thousand Barrels) 26,111 27,447 37,804 47,705 57,924 63,075 1983-2011 Extraction Loss...

13

coastal loss | NOLA DEFENDER  

U.S. Energy Information Administration (EIA)

BP Oil Doubled Wetland Loss, Study Says Posted Tuesday, ... coastal loss; Deepwater Horizon; louisiana coast; Oil; proceedings of the national academy ...

14

Extraction Report  

Science Conference Proceedings (OSTI)

Page 1. Extraction Report Apple iPhone (Physical) Summary Connection Type Cable No. 110 Extraction start date/time 10/23/2012 3:21:58 PM ...

2012-10-23T23:59:59.000Z

15

When Do Losses Count?  

Science Conference Proceedings (OSTI)

Current global and national databases that monitor losses from natural hazards suffer from a number of limitations, which in turn lead to misinterpretation and fallacies concerning the “truthfulness” of hazard loss data. These biases often go ...

Melanie Gall; Kevin A. Borden; Susan L. Cutter

2009-06-01T23:59:59.000Z

16

Evaluating Transformer Losses  

E-Print Network (OSTI)

This paper outlines how to determine what transformer losses cost and how to evaluate transformer bids to optimize the investment.

Grun, R. L. Jr.

1989-09-01T23:59:59.000Z

17

DNA Extraction  

NLE Websites -- All DOE Office Websites (Extended Search)

DNA Extraction DNA Extraction Being able to extract deoxyribonucleic acid (DNA) is important for a number of reasons. By studying DNA, scientists can identify genetic disorders or diseases, and they can also possibly find cures for them by manipulating or experimenting with this DNA. At the Laboratory, researchers have studied DNA to detect biothreat agents in environmental and forensic samples. Scientists also are studying how human DNA may be destroyed by certain types of electromagnetic waves at certain frequencies. Classroom Activity: This activity is about the extraction of DNA from strawberries. Strawberries are a great fruit to use for this lesson because each student can work on his or her own. Strawberries are recommended because they yield more DNA than any other fruit. Strawberries are octoploid, which means that they have eight copies of each

18

Information Extraction  

Science Conference Proceedings (OSTI)

The automatic extraction of information from unstructured sources has opened up new avenues for querying, organizing, and analyzing data by drawing upon the clean semantics of structured databases and the abundance of unstructured data. The field of ...

Sunita Sarawagi

2008-03-01T23:59:59.000Z

19

Fluid extraction  

DOE Patents (OSTI)

A method of extracting metalloid and metal species from a solid or liquid material by exposing the material to a supercritical fluid solvent containing a chelating agent is described. The chelating agent forms chelates that are soluble in the supercritical fluid to allow removal of the species from the material. In preferred embodiments, the extraction solvent is supercritical carbon dioxide and the chelating agent is a fluorinated .beta.-diketone. In especially preferred embodiments the extraction solvent is supercritical carbon dioxide, and the chelating agent comprises a fluorinated .beta.-diketone and a trialkyl phosphate, or a fluorinated .beta.-diketone and a trialkylphosphine oxide. Although a trialkyl phosphate can extract lanthanides and actinides from acidic solutions, a binary mixture comprising a fluorinated .beta.-diketone and a trialkyl phosphate or a trialkylphosphine oxide tends to enhance the extraction efficiencies for actinides and lanthanides. The method provides an environmentally benign process for removing contaminants from industrial waste without using acids or biologically harmful solvents. The method is particularly useful for extracting actinides and lanthanides from acidic solutions. The chelate and supercritical fluid can be regenerated, and the contaminant species recovered, to provide an economic, efficient process.

Wai, Chien M. (Moscow, ID); Laintz, Kenneth E. (Los Alamos, NM)

1999-01-01T23:59:59.000Z

20

Distribution System Losses Evaluation  

Science Conference Proceedings (OSTI)

Currently, there is not an industry standard on how utilities calculate and account for electrical losses and reductions in electric system losses. Computer models used to analyze power flows typically only include the primary components of the distribution system infrastructure. More detailed electric system models can benefit utilities by providing more accurate loss calculations as well as benefits for system planning and engineering. The utility industry could benefit from having a consistent and uni...

2008-12-16T23:59:59.000Z

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Energy losses in switches  

DOE Green Energy (OSTI)

The authors experiments show energy losses between 2 and 10 times that of the resistive time predictions. The experiments used hydrogen, helium, air, nitrogen, SF{sub 6} polyethylene, and water for the switching dielectric. Previously underestimated switch losses have caused over predicting the accelerator outputs. Accurate estimation of these losses is now necessary for new high-efficiency pulsed power devices where the switching losses constitute the major portion of the total energy loss. They found that the switch energy losses scale as (V{sub peak}I{sub peak}){sup 1.1846}. When using this scaling, the energy losses in any of the tested dielectrics are almost the same. This relationship is valid for several orders of magnitude and suggested a theoretical basis for these results. Currents up to .65 MA, with voltages to 3 MV were applied to various gaps during these experiments. The authors data and the developed theory indicates that the switch power loss continues for a much longer time than the resistive time, with peak power loss generally occurring at peak current in a ranging discharge instead of the early current time. All of the experiments were circuit code modeled after developing a new switch loss version based on the theory. The circuit code predicts switch energy loss and peak currents as a function of time. During analysis of the data they noticed slight constant offsets between the theory and data that depended on the dielectric. They modified the plasma conductivity for each tested dielectric to lessen this offset.

Martin, T.H.; Seamen, J.F.; Jobe, D.O.

1993-07-01T23:59:59.000Z

22

Modeling the Loss Distribution  

Science Conference Proceedings (OSTI)

In this paper, we focus on modeling and predicting the loss distribution for credit risky assets such as bonds and loans. We model the probability of default and the recovery rate given default based on shared covariates. We develop a new class of default ... Keywords: Basel II, default prediction, loss distribution, recovery rates

Sudheer Chava; Catalina Stefanescu; Stuart Turnbull

2011-07-01T23:59:59.000Z

23

U.S. Natural Gas Extraction Loss (Billion Cubic Feet)  

U.S. Energy Information Administration (EIA) Indexed Site

Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1973 79 79 77 73 77 74 76 77 74 76 75 78 1974 79 72 78 73 76 71 75 74 72 73 71 74 1975 77 71 75 73 73 71 73 73 70 71 70 75 1976 75 71 73 69 72 70 72 70 67 70 70 75 1977 75 72 75 71 73 71 72 71 69 70 69 74 1978 74 70 75 71 71 69 72 71 67 70 69 73 1979 70 65 69 67 68 65 66 67 65 67 68 72 1980 70 66 70 64 65 61 62 61 61 63 64 69 1981 68 61 67 65 66 63 65 66 61 64 61 67 1982 71 65 69 65 64 62 63 61 59 60 61 62 1983 72 64 66 62 62 60 63 66 64 68 68 75 1984 79 69 71 69 69 67 69 68 65 69 68 74 1985 77 70 71 66 66 63 65 65 64 66 66 75 1986 76 67 71 64 65 63 64 67 63 64 62 70

24

Extraction Loss of Natural Gas at Processing Plants  

U.S. Energy Information Administration (EIA) Indexed Site

Withdrawals from Gas Wells Gross Withdrawals from Oil Wells Gross Withdrawals from Shale Gas Wells Gross Withdrawals from Coalbed Wells Repressuring Vented and Flared...

25

Catalogue of a Loss  

E-Print Network (OSTI)

Catalogue of a Loss is a collection of sixty-two prose poems written within the past year and half. The work is printed on 4x6 cards. Each poem may be read individually from a single card or the poems can be read in ...

Berger, Larisa (Larisa A.)

2012-01-01T23:59:59.000Z

26

Apparatus for hydrocarbon extraction  

DOE Patents (OSTI)

Systems and methods for hydrocarbon extraction from hydrocarbon-containing material. Such systems and methods relate to extracting hydrocarbon from hydrocarbon-containing material employing a non-aqueous extractant. Additionally, such systems and methods relate to recovering and reusing non-aqueous extractant employed for extracting hydrocarbon from hydrocarbon-containing material.

Bohnert, George W.; Verhulst, Galen G.

2013-03-19T23:59:59.000Z

27

Gas Water Heater Energy Losses  

E-Print Network (OSTI)

non-firing, non- recovery mode, i.e. , during standby mode.The stack losses while in standby mode account for about 43%can be made by reducing standby heat losses. This paper

Biermayer, Peter

2012-01-01T23:59:59.000Z

28

Louisiana Wetland Loss at Askives  

U.S. Energy Information Administration (EIA)

Louisiana Wetland Loss? - Find Questions and Answers at Askives, the first startup that gives you an straight answer

29

Low Impact Weight Loss Exercises | Fish Oil Weight Loss  

U.S. Energy Information Administration (EIA)

Low Impact Weight Loss Exercises. You want to lose weight, but for whatever reason, you want to or only can perform low impact exercises. No problem.

30

AGS RESONANT EXTRACTION WITH HIGH INTENSITY BEAMS.  

SciTech Connect

The Brookhaven AGS third integer resonant extraction system allows the AGS to provide high quality, high intensity 25.5 GeV/c proton beams simultaneously to four target stations and as many as 8 experiments. With the increasing intensities (over 7 x 10{sup 13} protons/pulse) and associated longer spill periods (2.4 to 3 seconds long), we continue to run with low losses and high quality low modulation continuous current beams.[1] Learning to extract and transport these higher intensity beams has required a process of careful modeling and experimentation. We have had to learn how to correct for various instabilities and how to better match extraction and the transport lines to the higher emittance beams being accelerated in the AGS. Techniques employed include ''RF'' methods to smooth out momentum distributions and fine structure. We will present results of detailed multi-particle tracking modeling studies which enabled us to develop a clear understanding of beam loss mechanisms in the transport and extraction process. We will report on our status, experiences, and the present understanding of the intensity limitations imposed by resonant extraction and transport to fixed target stations.

AHRENS,L.; BROWN,K.; GLENN,J.W.; ROSER,T.; TSOUPAS,N.; VANASSELT,W.

1999-03-29T23:59:59.000Z

31

Minimize Boiler Short Cycling Losses  

SciTech Connect

This revised ITP tip sheet on minimizing boiler short cycling losses provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

2006-01-01T23:59:59.000Z

32

METAL EXTRACTION PROCESS  

DOE Patents (OSTI)

An improved method for extracting uranium from aqueous solutions by solvent extraction is presented. A difficulty encountered in solvent extraction operations using an organic extractant (e.g., tributyl phosphate dissolved in kerosene or carbon tetrachloride) is that emulsions sometimes form, and phase separation is difficult or impossible. This difficulty is overcome by dissolving the organic extractant in a molten wax which is a solid at operating temperatures. After cooling, the wax which now contains the extractant, is broken into small particles (preferably flakes) and this wax complex'' is used to contact the uranium bearing solutions and extract the metal therefrom. Microcrystalline petroleum wax and certain ethylene polymers have been found suitable for this purpose.

Lewis, G.W. Jr.; Rhodes, D.E.

1957-11-01T23:59:59.000Z

33

TRITIUM EXTRACTION FACILITY ALARA  

SciTech Connect

The primary mission of the Tritium Extraction Facility (TEF) is to extract tritium from tritium producing burnable absorber rods (TPBARs) that have been irradiated in a commercial light water reactor and to deliver tritium-containing gas to the Savannah River Site Facility 233-H. The tritium extraction segment provides the capability to deliver three (3) kilograms per year to the nation's nuclear weapons stockpile. The TEF includes processes, equipment and facilities capable of production-scale extraction of tritium while minimizing personnel radiation exposure, environmental releases, and waste generation.

Joye, BROTHERTON

2005-04-19T23:59:59.000Z

34

Supercritical Fluid Extraction  

E-Print Network (OSTI)

In supercritical fluid extraction, many options are available for achieving and controlling the desired selectivity, which is extremely sensitive to variations in pressure, temperature, and choice of solvent. The ability of supercritical fluids to vaporize relatively nonvolatile compounds at moderate temperatures can reduce the energy requirements compared to distillation and liquid extraction.

Johnston, K. P.; Flarsheim, W. M.

1984-01-01T23:59:59.000Z

35

Energy Loss by Breaking waves  

Science Conference Proceedings (OSTI)

Observations of the frequency of wind wave breaking in deep water are combined with laboratory estimates of the rate of energy loss a from single breaking wave to infer the net rate of energy transfer to the mixed layer from breaking waves, as a ...

S. A. Thorpe

1993-11-01T23:59:59.000Z

36

Beam Loss Studies for the 2-MW LBNE Proton Beam Line  

SciTech Connect

Severe limits are put on allowable beam loss during extraction and transport of a 2.3 MW primary proton beam for the Long Baseline Neutrino Experiment (LBNE) at Fermilab. Detailed simulations with the STRUCT and MARS codes have evaluated the impact of beam loss of 1.6 x 10{sup 14} protons per pulse at 120 GeV, ranging from a single pulse full loss to sustained small fractional loss. It is shown that loss of a single beam pulse at 2.3 MW will result in a catastrophic event: beam pipe destruction, damaged magnets and very high levels of residual radiation inside and outside the tunnel. Acceptable beam loss limits have been determined and robust solutions developed to enable efficient proton beam operation under these constraints.

Drozhdin, A.I.; Childress, S.R.; Mokhov, N.V.; Tropin, I.S.; Zwaska, R.; /Fermilab

2012-05-01T23:59:59.000Z

37

Extraction of nitrosoruthenium tributylphosphate  

SciTech Connect

Ruthenium is one of a number of elements that complicates the regeneration of processed nuclear fuel from atomic power stations. Because of its chemical properties, it often acompanies various elements in the extraction process and thus complicates the purification of uranium. In this paper, we decided to investigate the extraction chemistry of nitrosoruthenium trinitrate in order to establish the solvate number and the establish the conditions under which this compound transfers into weakly extracted forms. This is important in controlling and improving the process of purifying uranium from ruthenium.

Rozen, A.M.; Volk, V.I.; Zahkarkin, B.S. [and others

1995-11-01T23:59:59.000Z

38

Sound energy loss during sonolysis  

Science Conference Proceedings (OSTI)

This paper gives an analysis of sound energy losses due to sonolysis — dissociation of the part of water molecules to radicals H? and ?OH. The value of the energy loss can be evaluated by using the concentration of hydrogen peroxide which appears in the water as a result of cross?recombination of radicals ?OH+?OH=H2O2. Data previously obtained by different authors were used for the present analysis. Data for fresh water and also for water with dissolved gases were considered. Data covered a sound frequency range from 1.5 kHz to 2 MHz and sound pressure amplitudes 0.6–2.5 atm for normal static pressure and a water temperature of 20?°C. It is shown that the rate of increasing hydrogen peroxide concentration is proportional to the intensity of sound. The rate is also propor? tional to the concentration of dissolved oxygen and argon in water while other gases (hydrogen

Dmitry A. Selivanovsky; Grigory A. Domrachev

1995-01-01T23:59:59.000Z

39

Dekker PMIS Extraction Utility  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1217. The Extraction Utility is used for retrieving project 1217. The Extraction Utility is used for retrieving project management data from a variety of source systems for upload into the Dekker PMIS(tm) (Dekker iPursuit®, Dekker iProgram(tm), or DOE PARSII). This release incorporates a number of new features and updates primarily focused to improve the existing functionality. The quality of each Dekker PMIS(tm) Extraction Utility release is a primary consideration at Dekker, Ltd. Since every customer environment is unique, Dekker strongly recommends that each implementation site validate all software updates prior to release into the production environment. Dekker continually strives to enhance the features and capabilities of the Dekker PMIS(tm) Extraction Utility. We are very excited about this update and look forward to its implementation in your

40

NLC Pulsed Extraction  

NLE Websites -- All DOE Office Websites (Extended Search)

which transports 250 GeV beams from the main linac to the parallel bypass line. The design is, at least in principle, compatible with extraction of 60 bunch trains per second...

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Dekker PMIS Extraction Utility  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0907. The Extraction Utility is used for retrieving project 0907. The Extraction Utility is used for retrieving project management data from a variety of source systems for upload into Dekker PMIS(tm) (Dekker iPursuit®, Dekker iProgram(tm), or DOE PARSII). This release incorporates a number of new features and updates focused to improve existing functionality. The quality of each Dekker PMIS(tm) Extraction Utility release is a primary consideration at Dekker, Ltd. Since every customer environment is unique, Dekker strongly recommends that each implementation validate any software update prior to its release into the production environment. Dekker continually strives to enhance the features and capabilities of the Dekker PMIS(tm) Extraction Utility. We are very excited about this update and look forward to its implementation in your

42

Liquid chromatographic extraction medium  

DOE Patents (OSTI)

A method and apparatus are disclosed for extracting strontium and technetium values from biological, industrial and environmental sample solutions using a chromatographic column. An extractant medium for the column is prepared by generating a solution of a diluent containing a Crown ether and dispersing the solution on a resin substrate material. The sample solution is highly acidic and is introduced directed to the chromatographic column and strontium or technetium is eluted using deionized water. 1 fig.

Horwitz, E.P.; Dietz, M.L.

1994-09-13T23:59:59.000Z

43

Liquid chromatographic extraction medium  

DOE Patents (OSTI)

A method and apparatus for extracting strontium and technetium values from biological, industrial and environmental sample solutions using a chromatographic column is described. An extractant medium for the column is prepared by generating a solution of a diluent containing a Crown ether and dispersing the solution on a resin substrate material. The sample solution is highly acidic and is introduced directed to the chromatographic column and strontium or technetium is eluted using deionized water.

Horwitz, E. Philip (Naperville, IL); Dietz, Mark L. (Evanston, IL)

1994-01-01T23:59:59.000Z

44

Prebaked Anode from Coal Extract  

Science Conference Proceedings (OSTI)

We previously reported that the coal extract prepared from non-hydrogenative extraction of thermal coals using two-ring-aromatic solvent (Hyper-coal) is suitable ...

45

PARS II Extraction Utility | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Extraction Utility PARS II Extraction Utility PARS II Extraction Utility v8020130510.zip More Documents & Publications PARS II Extraction Utility Release Notes PARS II CPP...

46

Mechanical model for ductility loss  

Science Conference Proceedings (OSTI)

A mechanical model was constructed to probe into the mechanism of ductility loss. Fracture criterion based on critical localized deformation was undertaken. Two microstructure variables were considered in the model. Namely, the strength ratio of grain boundary affected area to the matrix, ..cap omega.., and the linear fraction, x, of grain boundary affected area. A parametrical study was carried out. The study shows that the ductility is very sensitive to those microstructure parameters. The functional dependence of ductility to temperature as well as strain-rate, suggested by the model, is demonstrated to be consistent with the observation.

Hu, W.L.

1980-02-11T23:59:59.000Z

47

Extracting the Eliashberg Function  

NLE Websites -- All DOE Office Websites (Extended Search)

Extracting the Eliashberg Extracting the Eliashberg Function Extracting the Eliashberg Function Print Wednesday, 23 February 2005 00:00 A multitude of important chemical, physical, and biological phenomena are driven by violations of the Born-Oppenheimer approximation (BOA), which decouples electronic from nuclear motion in quantum calculations of solids. Recent advances in experimental techniques combined with ever-growing theoretical capabilities now hold the promise of presenting an unprecedented picture of these violations. By means of high-resolution angle-resolved photoemission at the ALS and theoretical calculations, a multi-institutional collaboration that includes researchers from Oak Ridge National Laboratory, the University of Tennessee, Stanford University, and the ALS has obtained the first high-resolution spectroscopic images of the specific vibrational modes that couple to a given electronic state.

48

Le Bail Intensity Extraction  

NLE Websites -- All DOE Office Websites (Extended Search)

Le Bail Intensity Extraction Le Bail Intensity Extraction Presentation Goal Introduce the concepts behind LeBail fitting; why it is useful and how to perform a Le Bail fit with GSAS. Format: PDF slides or a RealPlayer video of the slides with accompanying audio and a demo video that shows how a Le Bail fit is performed. Presentation Outline What is the Le Bail method? Other approaches Why use the Le Bail method? Parameter fitting with Le Bail intensity extraction Le Bail refinement strategies Avoiding problems with background fitting: BKGEDIT Demo: an example Le Bail fit Links Le Bail lecture Slides (as PDF file) FlashMovie presentation with index (best viewed with 1024x768 or better screen resolution) FlashMovie file (800x600 pixels) Le Bail demo FlashMovie presentation with index (best viewed with 1024x768 or

49

Loss mechanisms in turbine tip clearance flows  

E-Print Network (OSTI)

Numerical simulations of tip clearance ow have been carried out to dene the loss generation mechanisms associated with tip leakage in unshrouded axial turbines. Mix- ing loss between the leakage, which takes the form of a ...

Huang, Arthur (Arthur C.)

2011-01-01T23:59:59.000Z

50

Supercritical fluid extraction  

DOE Patents (OSTI)

A method of extracting metalloid and metal species from a solid or liquid material by exposing the material to a supercritical fluid solvent containing a chelating agent. The chelating agent forms chelates that are soluble in the supercritical fluid to allow removal of the species from the material. In preferred embodiments, the extraction solvent is supercritical carbon dioxide and the chelating agent is a fluorinated or lipophilic crown ether or fluorinated dithiocarbamate. The method provides an environmentally benign process for removing contaminants from industrial waste without using acids or biologically harmful solvents. The chelate and supercritical fluid can be regenerated, and the contaminant species recovered, to provide an economic, efficient process.

Wai, Chien M. (Moscow, ID); Laintz, Kenneth (Pullman, WA)

1994-01-01T23:59:59.000Z

51

Louisiana Wetland Loss Fact at Askives  

U.S. Energy Information Administration (EIA)

Louisiana Wetland Loss Fact? - Find Questions and Answers at Askives, the first startup that gives you an straight answer

52

Corona losses dependence from the conductor diameter  

Science Conference Proceedings (OSTI)

This paper presents possibility to decrease the corona power losses in overhead transmission lines. Corona power losses can be reduced by increasing the diameter of the conductor and used bundled conductors per phase. The objectives were to determine ... Keywords: corona model, critical disruptive voltage, electric discharge, electric field, power losses, transmission line

Isuf Krasniqi; Vjollca Komoni; Avni Alidemaj; Gazmend Kabashi

2011-10-01T23:59:59.000Z

53

Shield Losses in Medium-Voltage Cables  

Science Conference Proceedings (OSTI)

Utilities can substantially reduce cable costs and circulating current losses by optimizing the design of concentric neutral conductors for underground distribution cables and by configuring installed cables to minimize energy loss. This guide shows how to design neutral conductors for maximum cost-effectiveness and includes calculations of circulating current losses and ampacities for commonly used cables.

1987-12-14T23:59:59.000Z

54

Induction machine stray loss from inter-bar currents  

E-Print Network (OSTI)

Stray load loss refers generally to the sources of induction machine loss not accounted for by typical calculations of primary or secondary copper loss, no load core loss, or friction and windage loss. Harmonic rotor bar ...

Englebretson, Steven Carl

2009-01-01T23:59:59.000Z

55

On the Information Loss in Static Systems  

E-Print Network (OSTI)

In this work we give a concise definition of information loss from a system-theoretic point of view. Based on this definition, we analyze the information loss in static input-output systems subject to a continuous-valued input. For a certain class of multiple-input, multiple-output systems the information loss is quantified. An interpretation of this loss is accompanied by upper bounds which are simple to evaluate. Finally, a class of systems is identified for which the information loss is necessarily infinite. Quantizers and limiters are shown to belong to this class.

Geiger, Bernhard C

2011-01-01T23:59:59.000Z

56

Study of Heat Loss: Commercial and Residential  

E-Print Network (OSTI)

There is much savings involved in the prevention of heat loss. Many structures exhibit such loss. Much can be done to improve or minimize the heat loss in a structure. These include interior and exterior modifications. It has been shown that heat can move by means of convection, conduction, and radiation. Problems with heat loss can be due to moisture, and poor construction techniques. There is a beneficial cost savings involved in the prevention of heat loss. Prevention techniques include insulation, caulking, weather stripping, and double pane windows. There are tables available for one to reference and calculate the return on their investment or “payback tim”

Emmett Ientilucci

1995-01-01T23:59:59.000Z

57

Extracting the Eliashberg Function  

NLE Websites -- All DOE Office Websites (Extended Search)

Extracting the Eliashberg Function Print Extracting the Eliashberg Function Print A multitude of important chemical, physical, and biological phenomena are driven by violations of the Born-Oppenheimer approximation (BOA), which decouples electronic from nuclear motion in quantum calculations of solids. Recent advances in experimental techniques combined with ever-growing theoretical capabilities now hold the promise of presenting an unprecedented picture of these violations. By means of high-resolution angle-resolved photoemission at the ALS and theoretical calculations, a multi-institutional collaboration that includes researchers from Oak Ridge National Laboratory, the University of Tennessee, Stanford University, and the ALS has obtained the first high-resolution spectroscopic images of the specific vibrational modes that couple to a given electronic state.

58

Extraction Utility Design Specification  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Extraction Extraction Utility Design Specification May 13, 2013 Document Version 1.10 1 Revision History Date Version Section and Titles Author Summary of Change January 15, 2010 1.0 All Eric Morgan, Dekker, Ltd. Initial Draft Document January 19, 2010 1.1 All Igor Pedan, Dekker, Ltd. Document update with EM team review notes January 20, 2010 1.2 2.1.1 EM Project Team Document Review January 27, 2010 1.3 All Bruce Bartells Final Draft Review May 10, 2010 1.4.1 2.8 Igor Pedan, Dekker, Ltd. Section Update May 14, 2010 1.4.2 2.3.1 Igor Pedan, Dekker, Ltd. System Tables Added May 17, 2010 1.4.3 2.3 Igor Pedan, Dekker, Ltd. Enhancements Update June 29, 2010 1.5 All Igor Pedan, Dekker, Ltd. Revised for Version

59

URANIUM EXTRACTION PROCESS  

DOE Patents (OSTI)

A process is described for recovering uranium values from acidic aqueous solutions containing hexavalent uranium by contacting the solution with an organic solution comprised of a substantially water-immiscible organlc diluent and an organic phosphate to extract the uranlum values into the organic phase. Carbon tetrachloride and a petroleum hydrocarbon fraction, such as kerosene, are sultable diluents to be used in combination with organlc phosphates such as dibutyl butylphosphonate, trlbutyl phosphine oxide, and tributyl phosphate.

Baldwin, W.H.; Higgins, C.E.

1958-12-16T23:59:59.000Z

60

Vehicle Technologies Office: Parasitic Loss Reduction  

NLE Websites -- All DOE Office Websites (Extended Search)

Parasitic Loss Reduction Parasitic Loss Reduction Heavy vehicles lose a tremendous amount of energy to wind resistance and drag, braking, and rolling resistance. Such non-engine losses can account for an approximate 45% decrease in efficiency. Other sources of energy loss include: friction and wear in the power train, thermal (heat) loads, operation of auxiliary loads (air conditioning, heaters, refrigeration, etc.), and engine idling. The parasitic loss activity identifies methodologies that may reduce energy losses, and tests those in the laboratory. Promising technologies are then prototyped and tested onboard heavy vehicles. Once validated, technologies must be tested on-road to obtain durability, reliability, and life-cycle cost data for the developmental component and/or design strategy.

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Reduce Radiation Losses from Heating Equipment  

Science Conference Proceedings (OSTI)

This DOE Industrial Technologies Program tip sheet describes how to save energy and costs by reducing expensive heat losses from industrial heating equipment, such as furnaces.

Not Available

2006-01-01T23:59:59.000Z

62

Analysis of TPV Network Losses (a Presentation)  

DOE Green Energy (OSTI)

This talk focuses on the theoretical analysis of electrical losses associated with electrically networking large numbers of TPV cells to produce high power TPV power generators.

DM DePoy; MW Dashiell; DD Rahner; LR Danielson; JE Oppenlander; JL Vell; RJ Wehrer

2004-12-08T23:59:59.000Z

63

Wetland loss dynamics in southwestern Barataria basin ...  

U.S. Energy Information Administration (EIA)

ABSTRACT We determined spatial associations of wetland loss rates in a 950-km2 study area in the southwestern Barataria basin of Louisiana's ...

64

Louisiana Coastal Land Loss Video Release  

U.S. Energy Information Administration (EIA)

Today, the U.S. Geological Survey National Wetlands Research Center is pleased to announce the release of a new Louisiana coastal land loss video, ...

65

Air extraction in gas turbines burning coal-derived gas  

SciTech Connect

In the first phase of this contracted research, a comprehensive investigation was performed. Principally, the effort was directed to identify the technical barriers which might exist in integrating the air-blown coal gasification process with a hot gas cleanup scheme and the state-of-the-art, US made, heavy-frame gas turbine. The guiding rule of the integration is to keep the compressor and the expander unchanged if possible. Because of the low-heat content of coal gas and of the need to accommodate air extraction, the combustor and perhaps, the flow region between the compressor exit and the expander inlet might need to be modified. In selecting a compressed air extraction scheme, one must consider how the scheme affects the air supply to the hot section of the turbine and the total pressure loss in the flow region. Air extraction must preserve effective cooling of the hot components, such as the transition pieces. It must also ensure proper air/fuel mixing in the combustor, hence the combustor exit pattern factor. The overall thermal efficiency of the power plant can be increased by minimizing the total pressure loss in the diffusers associated with the air extraction. Therefore, a study of airflow in the pre- and dump-diffusers with and without air extraction would provide information crucial to attaining high-thermal efficiency and to preventing hot spots. The research group at Clemson University suggested using a Griffith diffuser for the prediffuser and extracting air from the diffuser inlet. The present research establishes that the analytically identified problems in the impingement cooling flow are factual. This phase of the contracted research substantiates experimentally the advantage of using the Griffith diffuser with air extraction at the diffuser inlet.

Yang, Tah-teh; Agrawal, A.K.; Kapat, J.S.

1993-11-01T23:59:59.000Z

66

Fission product solvent extraction  

SciTech Connect

Two main objectives concerning removal of fission products from high-level tank wastes will be accomplished in this project. The first objective entails the development of an acid-side Cs solvent-extraction (SX) process applicable to remediation of the sodium-bearing waste (SBW) and dissolved calcine waste (DCW) at INEEL. The second objective is to develop alkaline-side SX processes for the combined removal of Tc, Cs, and possibly Sr and for individual separation of Tc (alone or together with Sr) and Cs. These alkaline-side processes apply to tank wastes stored at Hanford, Savannah River, and Oak Ridge. This work exploits the useful properties of crown ethers and calixarenes and has shown that such compounds may be economically adapted to practical processing conditions. Potential benefits for both acid- and alkaline-side processing include order-of-magnitude concentration factors, high rejection of bulk sodium and potassium salts, and stripping with dilute (typically 10 mM) nitric acid. These benefits minimize the subsequent burden on the very expensive vitrification and storage of the high-activity waste. In the case of the SRTALK process for Tc extraction as pertechnetate anion from alkaline waste, such benefits have now been proven at the scale of a 12-stage flowsheet tested in 2-cm centrifugal contactors with a Hanford supernatant waste simulant. SRTALK employs a crown ether in a TBP-modified aliphatic kerosene diluent, is economically competitive with other applicable separation processes being considered, and has been successfully tested in batch extraction of actual Hanford double-shell slurry feed (DSSF).

Moyer, B.A.; Bonnesen, P.V.; Sachleben, R.A. [and others

1998-02-01T23:59:59.000Z

67

Extracting the fundamental parameters  

E-Print Network (OSTI)

If supersymmetry is discovered at the LHC, the extraction of the fundamental parameters will be a formidable task. In such a system where measurements depend on different combinations of the parameters in a highly correlated system, the identification of the true parameter set in an efficient way necessitates the development and use of sophisticated methods. A rigorous treatment of experimental and theoretical errors is necessary to determine the precision of the measurement of the fundamental parameters. The techniques developed for this endeavor can also be applied to similar problems such as the determination of the Higgs boson couplings at the LHC.

Dirk Zerwas

2009-09-30T23:59:59.000Z

68

Quark energy loss and shadowing in nuclear Drell-Yan process  

E-Print Network (OSTI)

The energy loss effect in nuclear matter is another nuclear effect apart from the nuclear effects on the parton distribution as in deep inelastic scattering process. The quark energy loss can be measured best by the nuclear dependence of the high energy nuclear Drell-Yan process. By means of three kinds of quark energy loss parameterizations given in literature and the nuclear parton distribution extracted only with lepton-nucleus deep inelastic scattering experimental data, measured Drell-Yan production cross sections are analyzed for 800GeV proton incident on a variety of nuclear targets from FNAL E866. It is shown that our results with considering the energy loss effect are much different from these of the FNAL E866 who analysis the experimental data with the nuclear parton distribution functions obtained by using the deep inelastic lA collisions and pA nuclear Drell-Yan data . Considering the existence of energy loss effect in Drell-Yan lepton pairs production,we suggest that the extraction of nuclear parton distribution functions should not include Drell-Yan experimental data.

Chun-Gui Duan; Shu-Wen Cui; Zhan-Yuan Yan; Guang-Lie Li

2004-08-16T23:59:59.000Z

69

Extraction Utility Design Specification  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Extraction Utility Extraction Utility Design Specification January 11, 2011 Document Version 1.9 1 Revision History Date Version Section and Titles Author Summary of Change January 15, 2010 1.0 All Eric Morgan, Dekker, Ltd. Initial Draft Document January 19, 2010 1.1 All Igor Pedan, Dekker, Ltd. Document update with EM team review notes January 20, 2010 1.2 2.1.1 EM Project Team Document Review January 27, 2010 1.3 All Bruce Bartells Final Draft Review May 10, 2010 1.4.1 2.8 Igor Pedan, Dekker, Ltd. Section Update May 14, 2010 1.4.2 2.3.1 Igor Pedan, Dekker, Ltd. System Tables Added May 17, 2010 1.4.3 2.3 Igor Pedan, Dekker, Ltd. Enhancements Update June 29, 2010 1.5 All Igor Pedan, Dekker, Ltd. Revised for Version 8.0.20100628 July 14, 2010 1.5.1 2.8 Igor Pedan,

70

Heat loss from an open cavity  

DOE Green Energy (OSTI)

Cavity type receivers are used extensively in concentrating solar thermal energy collecting systems. The Solar Total Energy Project (STEP) in Shenandoah, Georgia is a large scale field test for the collection of solar thermal energy. The STEP experiment consists of a large field array of solar collectors used to supplement the process steam, cooling and other electrical power requirements of an adjacent knitwear manufacturing facility. The purpose of the tests, conducted for this study, was to isolate and quantify the radiative, conductive, and convective components of total heat loss, and to determine the effects of operating temperature, receiver angle, and aperture size on cavity heat loss. An analytical model for radiative heat loss was developed and compared with two other methods used to determine radiative heat loss. A proposed convective heat loss correlation, including effects of aperture size, receiver operating temperature, and receiver angle is presented. The resulting data is a source to evaluate the STEP measurements.

McDonald, C.G. [California State Polytechnic Univ., Pomona, CA (United States). Coll. of Engineering

1995-12-01T23:59:59.000Z

71

Definition: Reduced Electricity Losses | Open Energy Information  

Open Energy Info (EERE)

Losses Losses Jump to: navigation, search Dictionary.png Reduced Electricity Losses Functions that provide this benefit could help manage peak feeder loads, reduced electricity throughput, locate electricity production closer to the load and ensure that voltages remain within service tolerances, while minimizing the amount of reactive power provided. These actions can reduce electricity losses by making the system more efficient for a given load served or by actually reducing the overall load on the system.[1] Related Terms load, electricity generation, reactive power, smart grid References ↑ SmartGrid.gov 'Description of Benefits' An inl LikeLike UnlikeLike You like this.Sign Up to see what your friends like. ine Glossary Definition Retrieved from "http://en.openei.org/w/index.php?title=Definition:Reduced_Electricity_Losses&oldid=502644

72

A Rapid Loss Index for Tropical Cyclone Disasters in China  

Science Conference Proceedings (OSTI)

Disaster emergency response needs rapid estimation on disaster loss. In China it is of great importance to develop a loss index for rapidly assessing tropical cyclone (TC) disaster loss. In this paper, a new composite loss index for TC landing on China ... Keywords: Tropical Cyclone, Disaster, Loss Index, Rapid Loss Assessment

Ying Li; Weihua Fang

2012-06-01T23:59:59.000Z

73

INFORMATION EXTRACTION AND SPEECH RECOGNITION  

Science Conference Proceedings (OSTI)

... Named Entity 1 In addition, the parallel MET evaluation is per- forming multilingual named entity extraction — for Japanese, Chinese, and Thai. ...

2011-08-22T23:59:59.000Z

74

INFORMATION EXTRACTION AND SPEECH RECOGNITION  

Science Conference Proceedings (OSTI)

... Named Entity 1 In addition, the parallel MET evaluation is pe rforming multilingual named entity extraction -- forJapanese, Chinese, and Thai. ...

2011-08-22T23:59:59.000Z

75

Extraction chromatography: Progress and opportunities  

SciTech Connect

Extraction chromatography provides a simple and effective method for the analytical and preparative-scale separation of a variety of metal ions. Recent advances in extractant design, particularly the development of extractants capable of metal ion recognition or of strong complex formation in highly acidic media, have significantly improved the utility of the technique. Advances in support design, most notably the introduction of functionalized supports to enhance metal ion retention, promise to yield further improvements. Column instability remains a significant obstacle, however, to the process-scale application of extraction chromatography. 79 refs.

Dietz, M.L.; Horwitz, E.P.; Bond, A.H. [Argonne National Lab., IL (United States). Chemistry Div.

1997-10-01T23:59:59.000Z

76

Extracting alcohols from aqueous solutions  

DOE Patents (OSTI)

Hydrocarbon and surfactants are contacted with a solution of alcohol and water to extract the alcohol into the hydrocarbon-surfactant mixture.

Compere, Alicia L. (Knoxville, TN); Googin, John M. (Oak Ridge, TN); Griffith, William L. (Oak Ridge, TN)

1984-01-01T23:59:59.000Z

77

Site-specific electronic configurations of Fe 3d states by energy loss by channeled electrons  

SciTech Connect

Site-specific configurations of Fe 3d electrons in a spinel ferrite were investigated by electron energy loss spectroscopy under electron channeling conditions. Site-specific spectra were extracted by applying a multivariate curve resolution (MCR) technique to the data set. An electronic difference in the Fe sites caused by ligand field splitting of trivalent Fe was probed. This demonstrated the promise of site-specific valence and spin state analysis in spintronics applications of spinel ferrites.

Tatsumi, Kazuyoshi; Muto, Shunsuke; Nishida, Ikuo [Department of Materials, Physics, and Energy Engineering, Nagoya University, Chikusa, Nagoya 464-8603 (Japan); Rusz, Jan [Department of Physics and Astronomy, Uppsala University, Box 516, SE-75120 Uppsala (Sweden)

2010-05-17T23:59:59.000Z

78

Hot dry rock geothermal heat extraction  

DOE Green Energy (OSTI)

A man-made geothermal reservoir has been created at a depth of 2.7 km in hot, dry granite by hydraulic fracturing. The system was completed by directionally drilling a second well in close proximity with the top of the vertical fracture. In early 1978 heat was extracted from this reservoir for a period of 75 days. During this period thermal power was produced at an average rate of 4 MW(t). Theoretical analysis of th measured drawdown suggests a total fracture heat transfer area of 16,000 m/sup 2/. Viscous impedance to through-flow declined continuously so that at the end of the experiment this impedance was only one-fifth its initial value. Water losses to the surrounding rock formation also decreased continuously, and eventually this loss rate was less than 1% of the circulated flow rate. Geochemical analyses suggest that, with scale up of the heat transfer area and deeper, hotter reservoirs, hot dry rock reservoirs can ultimately produce levels of power on a commercial scale.

Murphy, H.D.

1979-01-01T23:59:59.000Z

79

Why Ť25?? and Y-12 mercury losses  

NLE Websites -- All DOE Office Websites (Extended Search)

"25"? and Y-12 mercury losses Recently I learned something new regarding the "shortcut names" or code names for uranium-235 and plutonium-239. It seems the codes used to discuss...

80

Corona losses in HVdc bipolar lines  

SciTech Connect

The problem related to the prediction of corona losses in HVdc bipolar lines has been solved, in the past, by means of semi-empirical monomial formulae. However, the proposed formulae that are simpler to use do not always give adequate calculation precision, while the formulae that provide the closest results require implicit functions of different complexity, which are difficult to apply; moreover, it is not possible to understand clearly what influence the variations of the different line parameters have on the losses themselves. The new monomial semi-empirical relationship, proposed to predict the corona losses in HVdc bipolar lines, is very simple to use; it highlights the dependence of power losses due to the corona effect by the different line parameters. The formula has been developed by elaborating a considerable amount of available experimental data.

Corbellini, U.; Pelacchi, P. [Univ. of Pisa (Italy). Dept. of Electric Systems and Automation

1996-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Trough Receiver Heat Loss Testing (Presentation)  

DOE Green Energy (OSTI)

This presentation describes the design, fabrication, and qualification of an experimental capability for thermal loss testing of full-size trough receiver elements; and the testing on a variety of receivers.

Lewandowski, A.; Feik, C.; Hansen, R.; Phillips, S.; Bingham, C.; Netter, J.; Forristal, R.; Burkholder, F.; Meglan, B.; Wolfrum, E.

2006-02-01T23:59:59.000Z

82

Mass-loss from Red Giants  

E-Print Network (OSTI)

Although much is known about the nature of winds from hot stars and giants and supergiants with spectral types earlier than K, there is still much to be learned regarding the mass-loss process in cool, late-type stars. We will review the current state of research, with particular reference to observations and modelling of mass-loss from giant stars in symbiotic systems.

Brian Espey; Cian Crowley

2008-03-07T23:59:59.000Z

83

Parameter extraction from I-V characteristics of PV devices  

Science Conference Proceedings (OSTI)

Device parameters such as series and shunt resistances, saturation current and diode ideality factor influence the behaviour of the current-voltage (I-V) characteristics of solar cells and photovoltaic modules. It is necessary to determine these parameters since performance parameters are derived from the I-V curve and information provided by the device parameters are useful in analyzing performance losses. This contribution presents device parameters of CuIn(Se,S){sub 2}- and Cu(In,Ga)(Se,S){sub 2}-based solar cells, as well as, CuInSe{sub 2}, mono- and multicrystalline silicon modules determined using a parameter extraction routine that employs Particle Swarm Optimization. The device parameters of the CuIn(Se,S){sub 2}- and Cu(In,Ga)(Se,S){sub 2}-based solar cells show that the contribution of recombination mechanisms exhibited by high saturation current when coupled with the effects of parasitic resistances result in lower maximum power and conversion efficiency. Device parameters of photovoltaic modules extracted from I-V characteristics obtained at higher temperature show increased saturation current. The extracted values also reflect the adverse effect of temperature on parasitic resistances. The parameters extracted from I-V curves offer an understanding of the different mechanisms involved in the operation of the devices. The parameter extraction routine utilized in this study is a useful tool in determining the device parameters which reveal the mechanisms affecting device performance. (author)

Macabebe, Erees Queen B. [Department of Electronics, Computer and Communications Engineering, Ateneo de Manila University, Loyola Heights, Quezon City 1108 (Philippines); Department of Physics and Centre for Energy Research, Nelson Mandela Metropolitan University, PO Box 77000, Port Elizabeth 6031 (South Africa); Sheppard, Charles J. [Department of Physics, University of Johannesburg, PO Box 524, Auckland Park 2006 (South Africa); Dyk, E. Ernest van [Department of Physics and Centre for Energy Research, Nelson Mandela Metropolitan University, PO Box 77000, Port Elizabeth 6031 (South Africa)

2011-01-15T23:59:59.000Z

84

Support vector machines with the ramp loss and the hard margin loss  

E-Print Network (OSTI)

Nov 4, 2008 ... Despite the fact that training SVM with the robust loss functions requires the solution of a quadratic mixed-integer program (QMIP) and is ...

85

SOLVENT EXTRACTION PROCESS FOR PLUTONIUM  

DOE Patents (OSTI)

The separation of plutonium from aqueous inorganic acid solutions by the use of a water immiscible organic extractant liquid is described. The plutonium must be in the oxidized state, and the solvents covered by the patent include nitromethane, nitroethane, nitropropane, and nitrobenzene. The use of a salting out agents such as ammonium nitrate in the case of an aqueous nitric acid solution is advantageous. After contacting the aqueous solution with the organic extractant, the resulting extract and raffinate phases are separated. The plutonium may be recovered by any suitable method.

Seaborg, G.T.

1959-04-14T23:59:59.000Z

86

Liquid-Liquid Extraction Processes  

E-Print Network (OSTI)

Liquid-liquid extraction is the separation of one or more components of a liquid solution by contact with a second immiscible liquid called the solvent. If the components in the original liquid solution distribute themselves differently between the two liquid phases, separation will result. This is the principle upon which separation by liquid-liquid extraction is based, and there are a number of important applications of this concept in industrial processes. This paper will review the basic concepts and applications as well as present future directions for the liquid-liquid extraction process.

Fair, J. R.; Humphrey, J. L.

1983-01-01T23:59:59.000Z

87

Atom-molecule conversion with particle losses  

E-Print Network (OSTI)

Based on the mean-field approximation and the phase space analysis, we study the dynamics of an atom-molecule conversion system subject to particle loss. Starting from the many-body dynamics described by a master equation, an effective nonlinear Schr\\"odinger equation is introduced. The classical phase space is then specified and classified by fixed points. The boundary, which separate different dynamical regimes have been calculated and discussed. The effect of particle loss on the conversion efficiency and the self-trapping is explored.

B. Cui; L. C. Wang; X. X. Yi

2011-03-01T23:59:59.000Z

88

AC Loss Measurements with a Cryocooled Sample  

SciTech Connect

A new cryostat cooled by a closed-cycle Cryomech GB-37 cryocooler for superconductor measurements at temperatures down to 20 K is described. The sample is conductively coupled to the cold stage so as to minimize vibration and thermal stresses. AC losses have been measured calorimetrically in several HTSC coils that have been wound to simulate sub-scale transformer winding pairs. Stable temperatures down to 20 K were reached on these coils, allowing measurements at practical levels of ac current and I{sub c}. By using short ac current pulses, losses on individual turns could be resolved. Results are reported mainly to showcase the apparatus, measurement procedure and analytical approach.

Schwenterly, S.W.

2001-02-15T23:59:59.000Z

89

Have Disaster Losses Increased Due to Anthropogenic Climate Change?  

Science Conference Proceedings (OSTI)

The increasing impact of natural disasters over recent decades has been well documented, especially the direct economic losses and losses that were insured. Claims are made by some that climate change has caused more losses, but others assert ...

Laurens M. Bouwer

2011-01-01T23:59:59.000Z

90

Extractive Metallurgy of Rare Earths  

Science Conference Proceedings (OSTI)

Jan 24, 2006 ... The extractive metallurgy of the rare-earth elements has several features that make it unique—a variety of both input ores and final products, ...

91

Capacitance measurements and k-value extractions of low-k films  

Science Conference Proceedings (OSTI)

We review test vehicles and methods that are commonly used for capacitance measurements of low-k films and the general procedure for k-value extractions. We demonstrate that a considerable loss of accuracy may occur if metal-insulator-semiconductor (MIS) ... Keywords: Back contact, Capacitance, Dielectric films, Leakage, Low-k materials, Ohmic contacts, Water uptake, k-Value

Ivan Ciofi; Mikhail R. Baklanov; Zsolt Tkei; Gerald P. Beyer

2010-11-01T23:59:59.000Z

92

ORNL analysis predicts losses from extreme weather damage could...  

NLE Websites -- All DOE Office Websites (Extended Search)

ORNL analysis predicts losses from extreme weather damage could double by 2050 Researcher tackles unprecedented county-by-county economic loss forecast Research in impacts,...

93

Aerodynamic Losses and Heat Transfer in a Blade Cascade with...  

NLE Websites -- All DOE Office Websites (Extended Search)

Aerodynamic Losses and Heat Transfer in a Aerodynamic Losses and Heat Transfer in a Blade Cascade with 3 Blade Cascade with 3 - - D D Endwall Endwall Contouring Contouring...

94

Mobile device protection from loss and capture  

Science Conference Proceedings (OSTI)

Mobile devices play a critical role in assistive environments. How to authenticate and secure communications among them has become more important especially against loss and capture of the devices. In this paper, we present an approach to protect signing ... Keywords: assistive environment, authentication, digital signature, forward security, mobile device

Zhengyi Le; Yi Ouyang; Yurong Xu; Fillia Makedon

2008-07-01T23:59:59.000Z

95

Production and Handling Slide 11: Solvent Extraction  

NLE Websites -- All DOE Office Websites (Extended Search)

Extraction Skip Presentation Navigation First Slide Previous Slide Next Slide Last Presentation Table of Contents Solvent Extraction Refer to caption below for image description...

96

PARS II Extraction Utility | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PARS II Extraction Utility DEC1387487110111DekkerPMISExtractionUtilityv8020101217.zip More Documents & Publications Dekker PMIS Extraction Utility Release Notes for the PARS...

97

Extractant composition including crown ether and calixarene extractants  

SciTech Connect

An extractant composition comprising a mixed extractant solvent consisting of calix[4] arene-bis-(tert-octylbenzo)-crown-6 ("BOBCalixC6"), 4',4',(5')-di-(t-butyldicyclo-hexano)-18-crown-6 ("DtBu18C6"), and at least one modifier dissolved in a diluent. The DtBu18C6 may be present at from approximately 0.01M to approximately 0.4M, such as at from approximately 0.086 M to approximately 0.108 M. The modifier may be 1-(2,2,3,3-tetrafluoropropoxy)-3-(4-sec-butylphenoxy)-2-propanol ("Cs-7SB") and may be present at from approximately 0.01M to approximately 0.8M. In one embodiment, the mixed extractant solvent includes approximately 0.15M DtBu18C6, approximately 0.007M BOBCalixC6, and approximately 0.75M Cs-7SB modifier dissolved in an isoparaffinic hydrocarbon diluent. The extractant composition further comprises an aqueous phase. The mixed extractant solvent may be used to remove cesium and strontium from the aqueous phase.

Meikrantz, David H. (Idaho Falls, ID); Todd, Terry A. (Aberdeen, ID); Riddle, Catherine L. (Idaho Falls, ID); Law, Jack D. (Pocalello, ID); Peterman, Dean R. (Idaho Falls, ID); Mincher, Bruce J. (Idaho Falls, ID); McGrath, Christopher A. (Blackfoot, ID); Baker, John D. (Blackfoot, ID)

2009-04-28T23:59:59.000Z

98

PREPARATION OF ALKYL PYROPHOSPHATE EXTRACTANTS  

DOE Patents (OSTI)

A process for providing superior solvent extractants for metal recovery processes is given wherein the extractant comprises an alkyl pyrophosphoric acid ester dissolved in an organic solvent diluent. Finely divided solid P/sub 2/O/ sub 5/ is slurried in an organic solvent-diluent selected from organic solvents such as kerosene, benzene, chlorobenzene, toluene, etc. An alcohol selected from the higher alcohols having 4 to 17 carbon atoms. e.g.. hexanol-1. heptanol-3, octanol-1. 2.6-dimethyl-heptanol-4, and decanol-1, is rapidly added to the P/sub 2/O/sub 5/ slurry in the amount of about 2 moles of alcohol to 1 mole of P/sub 2/ O/sub 5/. The temperature is maintained below about 110 deg C during the course of the P/sub 2/O/sub 5/-alcohol reaction. An alkyl pyrophosphate extractant compound is formed as a consequence of the reaction process. The alkyl pyrophosphate solvent-diluent extractant phase is useful in solvent extraction metal recovery processes.

Levine, C.A.; Skiens, W.E.; Moore, G.R.

1960-08-01T23:59:59.000Z

99

Reducing fischer-tropsch catalyst attrition losses in high ...  

Reducing fischer-tropsch catalyst attrition losses in high agitation reaction systems United States Patent

100

Scannerless loss modulated flash color range imaging  

SciTech Connect

Scannerless loss modulated flash color range imaging methods and apparatus are disclosed for producing three dimensional (3D) images of a target within a scene. Apparatus and methods according to the present invention comprise a light source providing at least three wavelengths (passbands) of illumination that are each loss modulated, phase delayed and simultaneously directed to illuminate the target. Phase delayed light backscattered from the target is spectrally filtered, demodulated and imaged by a planar detector array. Images of the intensity distributions for the selected wavelengths are obtained under modulated and unmodulated (dc) illumination of the target, and the information contained in the images combined to produce a 3D image of the target.

Sandusky, John V. (Albuquerque, NM); Pitts, Todd Alan (Rio Rancho, NM)

2009-02-24T23:59:59.000Z

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Scannerless loss modulated flash color range imaging  

SciTech Connect

Scannerless loss modulated flash color range imaging methods and apparatus are disclosed for producing three dimensional (3D) images of a target within a scene. Apparatus and methods according to the present invention comprise a light source providing at least three wavelengths (passbands) of illumination that are each loss modulated, phase delayed and simultaneously directed to illuminate the target. Phase delayed light backscattered from the target is spectrally filtered, demodulated and imaged by a planar detector array. Images of the intensity distributions for the selected wavelengths are obtained under modulated and unmodulated (dc) illumination of the target, and the information contained in the images combined to produce a 3D image of the target.

Sandusky, John V. (Albuquerque, NM); Pitts, Todd Alan (Rio Rancho, NM)

2008-09-02T23:59:59.000Z

102

Economics of heat loss for power cables  

SciTech Connect

Energy losses occur in power cables which cause a rise in the conductor temperature. A trend toward higher allowable conductor temperatures has increased the energy losses during operation. At the same time, the costs of the energy has increased dramatically. With a given installation and load, energy costs vary inversely with the conductor size. However, initial costs vary directly with the conductor size. This relationship can be utilized to select a conductor size which minimizes the sum of the initial costs an the energy costs. This paper reviews present value techniques and identifies the level of energy costs in some particular installation configurations. An analysis is made of the marginal costs and savings available by changing the size of the conductor in a cable circuit.

Cornelison, K.E.

1982-07-01T23:59:59.000Z

103

Information Loss in Black Hole Evaporation  

E-Print Network (OSTI)

Parikh-Wilczek tunnelling framework is investigated again. We argue that Parikh-Wilczek's treatment, which satisfies the first law of black hole thermodynamics and consists with an underlying unitary theory, is only suitable for a reversible process. Because of the negative heat capacity, an evaporating black hole is a highly unstable system. That is, the factual emission process is irreversible, the unitary theory will not be satisfied and the information loss is possible.

Jingyi Zhang; Yapeng Hu; Zheng Zhao

2005-12-11T23:59:59.000Z

104

Recent Stirling engine loss - understanding results  

DOE Green Energy (OSTI)

For several years, the National Aeronautics and Space Administration and other US Government agencies have been funding experimental and analytical efforts to improve the understanding of Stirling thermodynamic losses. NASA`s objective is to improve Stirling engine design capability to support the development of new engines for space power. An overview of these efforts was last given at the 1988 IECEC. Recent results of this research are reviewed.

Tew, R.C.; Thieme, L.G.; Dudenhoefer, J.E.

1994-09-01T23:59:59.000Z

105

Sirius A: turbulence or mass loss?  

E-Print Network (OSTI)

Context. Abundance anomalies observed in a fraction of A and B stars of both Pop I and II are apparently related to internal particle transport. Aims. Using available constraints from Sirius A, we wish to determine how well evolutionary models including atomic diffusion can explain observed abundance anomalies when either turbulence or mass loss is used as the main competitor to atomic diffusion. Methods. Complete stellar evolution models, including the effects of atomic diffusion and radiative accelerations, have been computed from the zero age main-sequence of 2.1M\\odot stars for metallicities of Z0 = 0.01 \\pm 0.001 and shown to agree with the observed parameters of Sirius A. Surface abundances were predicted for three values of the mass loss rate and for four values of the mixed surface zone. Results. A mixed mass of ~ 10^-6 M\\odot or a mass loss rate of 10^-13 M\\odot/yr were determined through comparison with observations. Of the 17 abundances determined observationally which are included in our calculati...

Michaud, G; Vick, M

2011-01-01T23:59:59.000Z

106

ChronoSeeker: Future Opinion Extraction  

Science Conference Proceedings (OSTI)

In this paper, we will propose a novel technique for Future Opinion Extraction, a new task of Information Extraction. The system we built can extract automatically future opinions, building automatic queries for the Search API. We obtained an F-Measure ... Keywords: Data Mining, Information Extraction, Machine Learning

Pierre Brun; Hideki Kawai; Kazuo Kunieda; Keiji Yamada

2009-09-01T23:59:59.000Z

107

Clustering techniques for open relation extraction  

Science Conference Proceedings (OSTI)

This work investigates clustering techniques for Relation Extraction (RE). Relation Extraction is the task of extracting relationships among named entities (e.g., people, organizations and geo-political entities) from natural language text. We are particularly ... Keywords: relation extraction, text clustering

Filipe Mesquita

2012-05-01T23:59:59.000Z

108

Interactive out-of-core isosurface extraction  

Science Conference Proceedings (OSTI)

Keywords: interval tree, isosurface extraction, marching cubes, out-of-core computation, scientific visualization

Yi-Jen Chiang; Cláudio T. Silva; William J. Schroeder

1998-10-01T23:59:59.000Z

109

Extracting work from quantum systems  

E-Print Network (OSTI)

We consider the task of extracting work from quantum systems in the resource theory perspective of thermodynamics, where free states are arbitrary thermal states, and allowed operations are energy conserving unitary transformations. Taking as our work storage system a 'weight' we prove the second law and then present simple protocols which extract average work equal to the free energy change of the system - the same amount as in classical thermodynamics. Crucially, for systems in 'classical' states (mixtures of energy eigenstates) our protocol works on a single copy of the system. This is in sharp contrast to previous results, which showed that in case of almost-deterministic work extraction, collective actions on multiple copies are necessary to extract the free energy. This establishes the fact that free energy is a meaningful notion even for individual systems in classical states. However, for non-classical states, where coherences between energy levels exist, we prove that collective actions are necessary, so long as no external sources of coherence are used.

Paul Skrzypczyk; Anthony J. Short; Sandu Popescu

2013-02-12T23:59:59.000Z

110

Building Extraction Using Lidar Data  

E-Print Network (OSTI)

Accurate 3D surface models in urban areas are essential for a variety of applications, such as visualization, GIS, and mobile communications. Since manual surface reconstruction is very costly and time consuming, the development of automated algorithms is of great importance. On the other hand LIDAR data is a relatively new technology for obtaining Digital Surface Models (DSM) of the earth’s surface. It is a fast method for sampling the earth’s surface with a high density and high point accuracy. In this paper a new approach for building extraction from LIDAR data is presented. The approach utilizes the geometric properties of urban buildings for the reconstruction of the building wire-frames from the LIDAR data. We start by finding the candidate building points that are used to populate a plane parameter space. After filling the plane parameter space, we find the planes that can represent the building roof surfaces. Roof regions are then extracted and the plane parameters are refined using a robust estimation technique and the geometric constraint between adjacent roof facets. The region boundaries are extracted and used to form the building wire-frames. The algorithm is tested on two buildings from a locally acquired LIDAR data sets. The test results show some success in extracting urban area buildings. 1.

Ahmed F. Elaksher; James S. Bethel

2002-01-01T23:59:59.000Z

111

System Losses and Assessment Trade Study  

SciTech Connect

This Advanced Fuel Cycle Initiative (AFCI) study has developed new analysis methods to examine old and new technology options toward the goal of improving fuel cycle systems. We have integrated participants and information from AFCI Systems Analysis, Transmutation Fuels, Separations, and Waste Form Campaigns in the Systems Losses and Assessment Trade Study. The initial objectives of this study were to 1) increase understanding of system interdependencies and thereby identify system trade-offs that may yield important insights, 2) define impacts of separations product purity on fuel manufacture and transmutation reactivity, 3) define impacts from transuranic (TRU) losses to waste, 4) identify the interrelationships involved in fuels and separations technology performance, and 5) identify system configuration adjustments with the greatest potential for influencing system losses. While bounding and analyzing this initial problem, we also identified significantly higher-level programmatic drivers with broad implications to the current fuel cycle research charter and the general issue of a DOE complex wide need for a comprehensive and integrated nuclear material management as addressed by the new DOE Order 410.2 titled “Management of Nuclear Materials”. The initial modeling effort developed in this study for a much smaller subset of material (i.e., commercial fuel) and a selected transmutation scheme (i.e., fast reactor recycling) is a necessary first step towards examining a broader set of nuclear material management options, dispositioning strategies and integrated waste management options including potential areas of research leverage. The primary outcome from this initial study has been an enhanced integration among Campaigns and associated insights and analysis methods. Opportunities for improved understanding between the groups abound. The above lanthanide-actinide example highlights the importance of evaluating options via integration across the Campaigns. Plans for Fiscal Year 2010 are being made in a coordinated fashion such that the knowledge gained from the research performed by the Campaigns can benefit on-going work of the study, and that improved understanding of the system relationships can be used to guide the specific research and development (R&D) activities within the Campaigns. In FY-10, the System Losses and Assessment Trade Study will carry-over activities from FY-09. We will continue to refine impurity and loss estimates and impurity limits on fuels by incorporating results from ongoing R&D. And we will begin work on an enhanced nuclear material management model to allow us to continue to improve our overall system understanding of the trade-offs between separations, fuel fabrication, waste forms, waste disposition, SNM losses, reactor performance, and proliferation resistance. In the future, we can also better understand how used fuel and other forms of remote-handled SNM can be better integrated into an overall nuclear material management program that will evolve for the DOE complex via Order 410.2 (DOE 2009).

David Shropshire; Steve Piet; Nick Soelberg; Robert Cherry; Roger Henry; David Meikrantz; Greg Teske; Eric Shaber; Candido Pereira

2009-09-01T23:59:59.000Z

112

Optimal detection of losses by thermal probes  

E-Print Network (OSTI)

We consider the discrimination of lossy bosonic channels and focus to the case when one of the values for the loss parameter is zero, i.e., we address the detection of a possible loss against the alternative hypothesis of an ideal lossless channel. This discrimination is performed by inputting one-mode or two-mode squeezed thermal states with fixed total energy. By optimizing over this class of states, we find that the optimal inputs are pure, thus corresponding to single- and two-mode squeezed vacuum states. In particular, we show that for any value of the damping rate smaller than a critical value there is a threshold on the energy that makes the two-mode squeezed vacuum state more convenient than the corresponding single-mode state, whereas for damping larger than this critical value two-mode squeezed vacua are always better. We then consider the discrimination in realistic conditions, where it is unlikely to have pure squeezing. Thus by fixing both input energy and squeezing, we show that two-mode squeezed thermal states are always better than their single- mode counterpart when all the thermal photons are directed into the dissipative channel. Besides, this result also holds approximately for unbalanced distribution of the thermal photons. Finally, we also investigate the role of correlations in the improvement of detection. For fixed input squeezing (single-mode or two-mode), we find that the reduction of the quantum Chernoff bound is a monotone function of the two-mode entanglement as well as the quantum mutual information and the quantum discord. We thus verify that employing squeezing in the form of correlations (quantum or classical) is always a resource for loss detection whenever squeezed thermal states are taken as input.

Carmen Invernizzi; Matteo G. A. Paris; Stefano Pirandola

2010-11-11T23:59:59.000Z

113

Status of wake and array loss research  

DOE Green Energy (OSTI)

In recent years, many projects have evaluated wind turbine wake effects and resultant array losses in both Europe and the United States. This paper examines the status of current knowledge about wake effects and array losses and suggests future research. Single-turbine wake characteristics have been studied extensively and are generally described well by existing theoretical models. Field measurements of wake effects in wind turbine arrays are largely limited to small arrays, with 2 to 4 rows of turbines. Few data have been published on wake effects within large arrays. Measurements of wake deficits downwind of large arrays that deficits are substantially larger and extend farther downwind than expected. Although array design models have been developed, these models have been tested and verified using only limited data from a few rows of wind turbines in complex terrain, whereas some of the largest arrays have more than 40 rows of wind turbines. Planned cooperative efforts with the wind industry will obtain existing data relevant to analyzing energy deficits within large arrays and identifying data sets for potential use in array model verification efforts. Future research being considered include a cooperative research experiment to obtain more definitive data on wake deficits and turbulence within and downwind of large arrays. 16 refs., 9 figs., 1 tab.

Elliott, D.L.

1991-09-01T23:59:59.000Z

114

Parabolic Trough Receiver Heat Loss Testing (Poster)  

DOE Green Energy (OSTI)

Parabolic trough receivers, or heat collection elements (HCEs), absorb sunlight focused by the mirrors and transfer that thermal energy to a fluid flowing within them. Thje absorbing tube of these receivers typically operates around 400 C (752 F). HCE manufacturers prevent thermal loss from the absorbing tube to the environment by using sputtered selective Cermet coatings on the absorber and by surrounding the absorber with a glass-enclosed evacuated annulus. This work quantifies the heat loss of the Solel UVAC2 and Schott PTR70 HCEs. At 400 C, the HCEs perform similarly, losing about 400 W/m of HCE length. To put this in perspective, the incident beam radiation on a 5 m mirror aperture is about 4500 W/m, with about 75% of that energy ({approx} 3400 W/m) reaching the absorber surface. Of the 3400 W/m on the absorber, about 3000 W/m is absorbed into the working fluid while 400 W/m is lost to the environment.

Price, H.; Netter, J.; Bingham, C.; Kutscher, C.; Burkholder, F.; Brandemuehl, M.

2007-03-01T23:59:59.000Z

115

An overview of MHD seawater thruster performance and loss mechanisms  

DOE Green Energy (OSTI)

Loss mechanisms affecting the performance of an MHD seawater thruster system have ben identified and discussed. Among those losses are the jet and nozzle losses, joule heating losses, surface potential and electro-chemical losses, frictional losses, and electrical end losses. Simple, but accurate, models have seen used to assess the relative and absolute magnitude of these losses and to investigate their influence on the overall thruster efficiency. A parametric study has been performed for a generic full size seawater vehicle propelled by an MHD thruster at different operating conditions. The results of this study confirm that higher efficiencies can be achieved at high magnetic field strengths (> 10 Tesla). Furthermore, the results indicate that higher efficiencies can be maintained over a wide range of cruising speeds (2--20 m/s or 4--40 knots) at higher magnetic fields (20 Tesla).

Doss, E.D.; Geyer, H.K.

1992-01-01T23:59:59.000Z

116

An overview of MHD seawater thruster performance and loss mechanisms  

DOE Green Energy (OSTI)

Loss mechanisms affecting the performance of an MHD seawater thruster system have ben identified and discussed. Among those losses are the jet and nozzle losses, joule heating losses, surface potential and electro-chemical losses, frictional losses, and electrical end losses. Simple, but accurate, models have seen used to assess the relative and absolute magnitude of these losses and to investigate their influence on the overall thruster efficiency. A parametric study has been performed for a generic full size seawater vehicle propelled by an MHD thruster at different operating conditions. The results of this study confirm that higher efficiencies can be achieved at high magnetic field strengths (> 10 Tesla). Furthermore, the results indicate that higher efficiencies can be maintained over a wide range of cruising speeds (2--20 m/s or 4--40 knots) at higher magnetic fields (20 Tesla).

Doss, E.D.; Geyer, H.K.

1992-09-01T23:59:59.000Z

117

Gene family evolution by duplication, speciation and loss - CECM  

E-Print Network (OSTI)

increase of the lower bound. Let S = {S1,...,Sk} be a set .... (expected number of event by million years) and a gene loss rate of 0.02. We chose a gene gain/loss ...

118

Loss Mechanisms and High Power Piezoelectric Components - TMS  

Science Conference Proceedings (OSTI)

Oct 15, 2006 ... Loss Mechanisms and High Power Piezoelectric Components ... we demonstrated high power multilayer piezoelectric transformers with Cu or ...

119

Characterizing Shading Losses on Partially Shaded PV Systems (Presentation)  

DOE Green Energy (OSTI)

Presentation on shaded PV power loss, practical issues with modeling shaded PV, and methods of implementing partially shaded PV modeling.

Deline, C.

2010-09-23T23:59:59.000Z

120

Robust adaptive subspace extraction for DOA tracking  

Science Conference Proceedings (OSTI)

This paper addresses the problem of extracting a time-varying signal subspace from noisy signal measurements for direction-of-arrival (DOA) estimation and tracking. A robust adaptive method for extracting the signal subspace is developed based on robust ...

Dekun Yang; S. J. Flockton

1996-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Open language learning for information extraction  

Science Conference Proceedings (OSTI)

Open Information Extraction (IE) systems extract relational tuples from text, without requiring a pre-specified vocabulary, by identifying relation phrases and associated arguments in arbitrary sentences. However, state-of-the-art Open IE systems such ...

Mausam; Michael Schmitz; Robert Bart; Stephen Soderland; Oren Etzioni

2012-07-01T23:59:59.000Z

122

Ontology based information extraction from text  

Science Conference Proceedings (OSTI)

Information extraction systems employ ontologies as a means to describe formally the domain knowledge exploited by these systems for their operation. The aim of this survey is to study the contribution of ontologies to information extraction systems. ...

Vangelis Karkaletsis; Pavlina Fragkou; Georgios Petasis; Elias Iosif

2011-01-01T23:59:59.000Z

123

Quantum cryptographic system with reduced data loss  

DOE Patents (OSTI)

A secure method for distributing a random cryptographic key with reduced data loss. Traditional quantum key distribution systems employ similar probabilities for the different communication modes and thus reject at least half of the transmitted data. The invention substantially reduces the amount of discarded data (those that are encoded and decoded in different communication modes e.g. using different operators) in quantum key distribution without compromising security by using significantly different probabilities for the different communication modes. Data is separated into various sets according to the actual operators used in the encoding and decoding process and the error rate for each set is determined individually. The invention increases the key distribution rate of the BB84 key distribution scheme proposed by Bennett and Brassard in 1984. Using the invention, the key distribution rate increases with the number of quantum signals transmitted and can be doubled asymptotically.

Lo, Hoi-Kwong (1309, Low Block, Lei Moon House Ap Lei Chau Estate, Hong Kong, HK); Chau, Hoi Fung (Flat C, 42nd Floor, Tower 1, University Heights 23 Pokfield Road, Pokfulam, Hong Kong, HK)

1998-01-01T23:59:59.000Z

124

Electron energy loss spectroscopy of disilane  

SciTech Connect

Electron energy loss spectra of disilane have been recorded over an excitation energy range of 20 eV employing electrons of 20 and 200 eV incident energy for scattering angles of 0/sup 0/--90/sup 0/. Every transition detected except one appears at an energy consistent with the first observed members of Rydberg series converging to one of four possible ion states. The first two observed transitions belong to (2a/sub 1//sub g/)/sup 2/..-->../sup 1//sup ,//sup 3/(2a/sub 1//sub g/,4s) dipole forbidden channels appearing at excitation energies of )similarreverse arrowto)6.3 and 7.05 eV for the triplet and singlet, respectively. Evidence is presented for the identification of additional forbidden transitions as well as possible low-lying valence transition

Dillon, M.A.; Spence, D.; Boesten, L.; Tanaka, H.

1988-04-01T23:59:59.000Z

125

Quantum cryptographic system with reduced data loss  

DOE Patents (OSTI)

A secure method for distributing a random cryptographic key with reduced data loss is disclosed. Traditional quantum key distribution systems employ similar probabilities for the different communication modes and thus reject at least half of the transmitted data. The invention substantially reduces the amount of discarded data (those that are encoded and decoded in different communication modes e.g. using different operators) in quantum key distribution without compromising security by using significantly different probabilities for the different communication modes. Data is separated into various sets according to the actual operators used in the encoding and decoding process and the error rate for each set is determined individually. The invention increases the key distribution rate of the BB84 key distribution scheme proposed by Bennett and Brassard in 1984. Using the invention, the key distribution rate increases with the number of quantum signals transmitted and can be doubled asymptotically. 23 figs.

Lo, H.K.; Chau, H.F.

1998-03-24T23:59:59.000Z

126

Ac loss calorimeter for three-phase cable  

SciTech Connect

A calorimeter for measuring ac losses in meter-long lengths of HTS superconducting power transmission line cables is described. The calorimeter, which is based on a temperature difference technique, has a precision of 1 mW and measures single, two-phase (coupling), and three-phase losses. The measurements show significant coupling losses between phases.

Daney, D.E.; Boenig, H.J.; Maley, M.P.; McMurry, D.E.; DeBlanc, B.G. [Los Alamos National Lab., NM (United States). Superconductivity Technology Center

1996-10-01T23:59:59.000Z

127

Aging, Estrogen Loss and Epoxyeicosatrienoic Acids Alison R. Lee1.  

E-Print Network (OSTI)

Aging, Estrogen Loss and Epoxyeicosatrienoic Acids (EETs) Alison R. Lee1. , Angela S. Pechenino1 loss, caused by menopause, and aging have inflammatory consequences. Epoxyeicosatrienoic acids (EETs cyclooxygenases and lipoxygenases. We hypothesized that aging and estrogen loss would reduce levels of anti

Hammock, Bruce D.

128

Analysis of technical loss in distribution line system  

Science Conference Proceedings (OSTI)

This research was aimed to present Technical loss analysis in Hatyai of Provincial Electricity Authority (PEA). This Analysis used calculation and PSS/Adept program. For considering the technical loss in distribution system included: transmission line ... Keywords: PSS/Adept program, technical loss, three phase power flow

Narong Mungkung; Nittaya Gomurut; Tanes Tanitteerapan; Somchai Arunrungrusmi; Weerachai Chaokumnerd; Toshifumi Yuji

2009-05-01T23:59:59.000Z

129

Production and extraction of sugars from switchgrass ...  

the water consumption requirements of more traditional IL pretreatment approaches. Results and discussion Alkali extraction using sugar standards

130

Available Technologies: Sugar Extraction and Ionic Liquid ...  

APPLICATIONS OF TECHNOLOGY: Biomass pretreatment for biofuel production; Recovery of products using biphasic liquid-liquid extraction; Recovery and ...

131

Rapid automatic keyword extraction for information retrieval ...  

Methods and systems for rapid automatic keyword extraction for information retrieval and analysis. Embodiments can include parsing words in an ...

132

Joint unsupervised structure discovery and information extraction  

Science Conference Proceedings (OSTI)

In this paper we present JUDIE (Joint Unsupervised Structure Discovery and Information Extraction), a new method for automatically extracting semi-structured data records in the form of continuous text (e.g., bibliographic citations, postal addresses, ... Keywords: data management, information extraction, text segmentation

Eli Cortez; Daniel Oliveira; Altigran S. da Silva; Edleno S. de Moura; Alberto H.F. Laender

2011-06-01T23:59:59.000Z

133

Extracting information networks from the blogosphere  

Science Conference Proceedings (OSTI)

We study the problem of automatically extracting information networks formed by recognizable entities as well as relations among them from social media sites. Our approach consists of using state-of-the-art natural language processing tools to identify ... Keywords: clustering, domain frequency, named entities, open information extraction, relation extraction

Yuval Merhav; Filipe Mesquita; Denilson Barbosa; Wai Gen Yee; Ophir Frieder

2012-09-01T23:59:59.000Z

134

BEAM LOSS MITIGATION IN THE OAK RIDGE SPALLATION NEUTRON SOURCE  

Science Conference Proceedings (OSTI)

The Oak Ridge Spallation Neutron Source (SNS) accelerator complex routinely delivers 1 MW of beam power to the spallation target. Due to this high beam power, understanding and minimizing the beam loss is an ongoing focus area of the accelerator physics program. In some areas of the accelerator facility the equipment parameters corresponding to the minimum loss are very different from the design parameters. In this presentation we will summarize the SNS beam loss measurements, the methods used to minimize the beam loss, and compare the design vs. the loss-minimized equipment parameters.

Plum, Michael A [ORNL

2012-01-01T23:59:59.000Z

135

Personalized Web Services for Web Information Extraction  

E-Print Network (OSTI)

The field of information extraction from the Web emerged with the growth of the Web and the multiplication of online data sources. This paper is an analysis of information extraction methods. It presents a service oriented approach for web information extraction considering both web data management and extraction services. Then we propose an SOA based architecture to enhance flexibility and on-the-fly modification of web extraction services. An implementation of the proposed architecture is proposed on the middleware level of Java Enterprise Edition (JEE) servers.

Jarir, Zahi; Erradi, Mahammed

2011-01-01T23:59:59.000Z

136

Optimization of oil extraction procedures from animal tissue.  

E-Print Network (OSTI)

??Oil was extracted from chicken and pork fat discards by microwave assisted extraction and soxhlet extraction for comparison. Protease enzyme and pulsed electric field were… (more)

Amusan, Anuoluwapo

2009-01-01T23:59:59.000Z

137

The Effect of Ultrasonificated Extracts of Spirulina maxima on the ...  

Science Conference Proceedings (OSTI)

Apr 20, 2010 ... Yields from conventional water and ethanol extraction were 15.8% ... ods like hot water or ethanol extraction processes cannot maintain extract ...

138

Preparation Of Dna-Containing Extract For Pcr Amplification  

NLE Websites -- All DOE Office Websites (Extended Search)

Preparation Of Dna-Containing Extract For Pcr Amplification Preparation Of Dna-Containing Extract For Pcr Amplification The method may provide a DNA-containing extract sufficiently...

139

Evaluation of Beam Loss and Energy Depositions for a Possible Phase II Design for LHC Collimation  

Science Conference Proceedings (OSTI)

The LHC beams are designed to have high stability and to be stored for many hours. The nominal beam intensity lifetime is expected to be of the order of 20h. The Phase II collimation system has to be able to handle particle losses in stable physics conditions at 7 TeV in order to avoid beam aborts and to allow correction of parameters and restoration to nominal conditions. Monte Carlo simulations are needed in order to evaluate the behavior of metallic high-Z collimators during operation scenarios using a realistic distribution of losses, which is a mix of the three limiting halo cases. Moreover, the consequences in the IR7 insertion of the worst (case) abnormal beam loss are evaluated. The case refers to a spontaneous trigger of the horizontal extraction kicker at top energy, when Phase II collimators are used. These studies are an important input for engineering design of the collimation Phase II system and for the evaluation of their effect on adjacent components. The goal is to build collimators that can survive the expected conditions during LHC stable physics runs, in order to avoid quenches of the SC magnets and to protect other LHC equipments.

Lari, L.; /EPFL-ISIC, Lausanne /CERN; Assmann, R.; /CERN; Bracco, C.; /EPFL-ISIC, Lausanne /CERN; Brugger, M.; /CERN; Cerutti, F.; /CERN; Doyle, E.; /SLAC; Ferrari, A.; /CERN; Keller, L.; Lundgren, S.; Markiewicz, Thomas W.; /SLAC; Mauri, M.; Redaelli, S.; Sarchiapone, L.; /CERN; Smith, J.; /SLAC; Vlachoudis, V.; Weiler, T.; /CERN

2011-11-07T23:59:59.000Z

140

Evaluation of Beam Losses And Energy Deposition for a Possible Phase II Design for LHC Collimation  

Science Conference Proceedings (OSTI)

The Large Hadron Collider (LHC) beams are designed to have high stability and to be stored for many hours. The nominal beam intensity lifetime is expected to be of the order of 20h. The Phase II collimation system has to be able to handle particle losses in stable physics conditions at 7 TeV in order to avoid beam aborts and to allow correction of parameters and restoration to nominal conditions. Monte Carlo simulations are needed in order to evaluate the behavior of metallic high-Z collimators during operation scenarios using a realistic distribution of losses, which is a mix of the three limiting halo cases. Moreover, the consequences in the IR7 insertion of the worst (case) abnormal beam loss are evaluated. The case refers to a spontaneous trigger of the horizontal extraction kicker at top energy, when Phase II collimators are used. These studies are an important input for engineering design of the collimation Phase II system and for the evaluation of their effect on adjacent components. The goal is to build collimators that can survive the expected conditions during LHC stable physics runs, in order to avoid quenches of the SC magnets and to protect other LHC equipments.

Lari, L.; Assmann, R.W.; Bracco, C.; Brugger, M.; Cerutti, F.; Ferrari, A.; Mauri, M.; Redaelli, S.; Sarchiapone, L.; Vlachoudis, Vasilis; Weiler, Th.; /CERN; Doyle, J.E.; Keller, L.; Lundgren, S.A.; Markiewicz, Thomas W.; Smith, J.C.; /SLAC; Lari, L.; /LPHE, Lausanne

2011-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Very Fast Losses of the Circulating LHC Beam, their Mitigation and Machine Protection  

E-Print Network (OSTI)

The Large Hadron Collider (LHC) has a nominal energy of 362MJ stored in each of its two counter-rotating beams - over two orders of magnitude more than any previous accelerator and enough to melt 880kg of copper. Therefore, in case of abnormal conditions comprehensive machine protection systems extract the beams safely from the LHC within not more than three turns $\\approx$270$\\mu$s. The first years of LHC operation demonstrated a remarkable reliability of the major machine protection systems. However, they also showed that the LHC is vulnerable to losses of the circulating beams on very fast timescales, which are too fast to ensure an active protection. Very fast equipment failures, in particular of normal-conducting dipole magnets and the transverse damper can lead to such beam losses. Whereas these failures were already studied in the past, other unexpected beam loss mechanisms were observed after the LHC start-up: so-called (un)identified falling objects (UFOs), which are believed to be micrometer-sized m...

Baer, Tobias; Elsen, Eckhard

142

Energy harvesting: A battle against power losses  

E-Print Network (OSTI)

Is it possible, are indefinite operational life and wireless power grids possible? Maybe not for every application, but how about for micro-scale devices? The fact is in situ energy sources like MEMS vibrational and thermoelectric generators can potentially achieve these goals for small footprint systemin-package (SiP) solutions like bio-implantable devices and wireless sensor transceiver network nodes. The key objective is to scavenge sufficient energy from the environment to sustain the micro-power system indefinitely, or at least extend life to practical levels. The problem, however, is micro-scale harvesters can only generate low-to-moderate power, and the energy-storage and power-delivery processes of the system inherently consume a portion of that, which is why the various functions of a loading application must be power-moded, that is, multiplexed, duty-cycled, and turned off when not needed. Fortunately, low frequency ambient vibrations are relatively abundant, stable, and predictable, and tuned MEMS- and CMOS-compatible electrostatic harvesters, for instance, can generate moderate power levels [1], but only if they prevail over the power losses associated with energy storage and power delivery. The focus of this article is to therefore identify, quantify, and discuss the power-consuming mechanisms present in a harvester circuit. Harvesting energy

A. Rinc; Oacute N-mora; Senior Member; Erick O. Torres; Student Member; Ieee Georgia

2006-01-01T23:59:59.000Z

143

Detonation propagation in a high loss configuration  

SciTech Connect

This work presents an experimental study of detonation wave propagation in tubes with inner diameters (ID) comparable to the mixture cell size. Propane-oxygen mixtures were used in two test section tubes with inner diameters of 1.27 mm and 6.35 mm. For both test sections, the initial pressure of stoichiometric mixtures was varied to determine the effect on detonation propagation. For the 6.35 mm tube, the equivalence ratio {phi} (where the mixture was {phi} C{sub 3}H{sub 8} + 50{sub 2}) was also varied. Detonations were found to propagate in mixtures with cell sizes as large as five times the diameter of the tube. However, under these conditions, significant losses were observed, resulting in wave propagation velocities as slow as 40% of the CJ velocity U{sub CJ}. A review of relevant literature is presented, followed by experimental details and data. Observed velocity deficits are predicted using models that account for boundary layer growth inside detonation waves.

Jackson, Scott I [Los Alamos National Laboratory; Shepherd, Joseph E [CALTECH

2009-01-01T23:59:59.000Z

144

Liquid-Liquid Extraction Equipment  

Science Conference Proceedings (OSTI)

Solvent extraction processing has demonstrated the ability to achieve high decontamination factors for uranium and plutonium while operating at high throughputs. Historical application of solvent extraction contacting equipment implies that for the HA cycle (primary separation of uranium and plutonium from fission products) the equipment of choice is pulse columns. This is likely due to relatively short residence times (as compared to mixer-settlers) and the ability of the columns to tolerate solids in the feed. Savannah River successfully operated the F-Canyon with centrifugal contactors in the HA cycle (which have shorter residence times than columns). All three contactors have been successfully deployed in uranium and plutonium purification cycles. Over the past 20 years, there has been significant development of centrifugal contactor designs and they have become very common for research and development applications. New reprocessing plants are being planned in Russia and China and the United States has done preliminary design studies on future reprocessing plants. The choice of contactors for all of these facilities is yet to be determined.

Jack D. Law; Terry A. Todd

2008-12-01T23:59:59.000Z

145

Process Refinements - Accounting for Motor-Fuel Losses  

NLE Websites -- All DOE Office Websites (Extended Search)

Accounting for Motor-Fuel Losses Accounting for Motor-Fuel Losses Motor fuel may be lost by leakage from storage tanks, spillage, fire, or other means; in addition, measurement differences brought about by temperature or other conditions and meter faults can result in apparent losses. Because this lost fuel is neither consumed on the highway nor used for off-highway purposes, it presents a problem for determining the appropriate base for taxation. In the past, FHWA allowed States to report actual losses or a percentage loss, which was capped at 1%. Usage data for States that did not report losses were not adjusted by FHWA to account for losses. In addition, diesel losses were not considered significant and were not counted. During the reassessment meetings and in the Federal Register notice of August 17, 2000, it was recommended that actual diesel losses also be documented and reported. However, because diesel reporting accounts for actual on-highway fuel use, a reporting of diesel losses is unnecessary.

146

Recovery of uranium from wet process phosphoric acid by solvent extraction  

SciTech Connect

The OPPA process offers three potential advantages over the DEPA-TOPO process. The OPPA extractant is much less expensive and has a higher extraction power for uranium than the DEPA-TOPO solvent. In addition it extracts U(IV), the prevailing oxidation state of uranium in wet-process phosphoric acid and this eliminates the liquor oxidation step required in the DEPA-TOPO process. However, the DEPA-TOPO solvent is known to be extremely stable and this process has been successfully demonstrated on a pilot-plant scale at phosphate plants. It is understood that several companies are planning to commercialize this process in the near future. On the other hand, the potentially more attractive OPPA process has not been proven in a pilot plant operation and some questions about the solubility and stability of the OPPA need to be answered. Because of the wide spread interest in this process, a program was started in cooperation with Mobil and Allied Chemical companies to study this extractant, to identify and isolate the material that solubilizes the mono- and diacids, and to determine the optimum concentration and ratios for uranium extraction. In addition, a long-term cyclic test is planned to better define solubility losses and stability of the extractant. Consideration will also be given to improving the recovery of uranium lost to the gypsum during calcination. 12 figures. (auth)

Hurst, F.J.

1976-01-01T23:59:59.000Z

147

Manipulation of the micro and macro-structure of beams extracted from cyclotrons  

SciTech Connect

It is standard practice in cyclotrons to alter the extracted micro-pulse width by using center-region slits and/or by chopping the beam before injection. The macro-structure can also be varied by means of pulsed or sinusoidal deflection devices before injection and/or after extraction. All above methods, however, involve cutting away the unwanted beam, thus reducing the time-averaged intensity. This paper will focus on some methods used to alter the time structure of extracted beams without significant beam loss. For example radial gradients in the accelerating fields from rf cavities can be utilized to compress, expand or even split longitudinally the circulating particle bunches. The macro-structure of the extracted beam can be altered by employing resonant extraction methods and replacing the static magnetic bump with either a pulsed or a sinusoidal transverse perturbation. The methods are most suitable for H cyclotrons but may also be considered in a limited scope for cyclotrons using direct extraction. Results of computer simulations and beam tests on the TRIUMF 500 MeV H{sup {minus}} cyclotron will be presented.

Laxdal, R.E.

1995-09-01T23:59:59.000Z

148

Shoreline erosion and wetland loss in Mississippi  

Science Conference Proceedings (OSTI)

Set within a geologic framework that includes Pleistocene and Holocene barrier complexes, estuarine bays, and fluvio-deltaic tidal wetlands, coastal Mississippi shares environmental problems of shoreline erosion and wetland loss with her neighboring Gulf Coast states. The mainland coast consists of several Pleistocene headlands and barrier complexes interspersed with the St. Louis Bay and Back Bay of Biloxi estuaries. Tidal wetlands are found in the protected bays and tributary streams, as well as in the Pleistocene/Holocene deltaic environments associated with the Escatawpa, Pascagoula, Pearl, and Mississippi fluvial systems. Four barrier islands, formed by erosion and modification of a late Pleistocene/Holocene beach ridge, lie 6 to 12 mi offshore. Historically, these islands with a combined length of 30 mi have both migrated westward in response to prevailing longshore currents and also transgressed across the shallow platform of Mississippi Sound. Wave erosion, both normal and storm-induced, has historically caused shoreline retreat on both the barrier islands and on the mainland. Erosion rates in excess of 30 ft/yr have been measured at the updrift ends of the barrier islands while accretion has characterized the downdrift ends. Net shoreline retreat rates of 6 ft/yr have been measured on the Gulf side of the islands, although the Sound side rates are nearly as high. Since the earliest accurate maps were made in 1848, Mississippi's barrier islands have experienced a 20% reduction in area, amounting to about 2,000 acres (800 ha). Mainland shoreline retreat rates are similarly high, except for along the more stable and now artificially nourished beaches of Harrison County. Erosion rates exceeding 10 ft/yr since 1940 have been noted at the Point aux Chenes headland and the Grand Batture Islands. These islands, which formerly sheltered valuable oyster grounds and protected fragile marshes, have been reduced to shoals over the last several decades.

Meyer-Arendt, K.J. (Mississippi State Univ., Mississippi State (USA)); Gazzier, C.A.

1990-09-01T23:59:59.000Z

149

Minimizing Energy Losses in Ducts | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Minimizing Energy Losses in Ducts Minimizing Energy Losses in Ducts Minimizing Energy Losses in Ducts June 24, 2012 - 5:45pm Addthis Placing ductwork in conditioned space can help reduce energy losses. | Photo courtesy of ©iStockphoto/SimplyCreativePhotography Placing ductwork in conditioned space can help reduce energy losses. | Photo courtesy of ©iStockphoto/SimplyCreativePhotography In new home construction or in retrofits, proper duct system design is critical. In recent years, energy-saving designs have sought to include ducts and heating systems in the conditioned space. Many existing duct systems lose a lot of energy from leakage and poor insulation, but you can reduce that loss by sealing and insulating your ducts. Existing ducts may also be blocked or may require simple upgrades.

150

Impacts of the Venezuelan Crude Oil Production Loss  

Gasoline and Diesel Fuel Update (EIA)

Impacts of the Venezuelan Crude Oil Production Loss Impacts of the Venezuelan Crude Oil Production Loss EIA Home > Petroleum > Petroleum Feature Articles Impacts of the Venezuelan Crude Oil Production Loss Printer-Friendly PDF Impacts of the Venezuelan Crude Oil Production Loss By Joanne Shore and John Hackworth1 Introduction The loss of almost 3 million barrels per day of crude oil production in Venezuela following a strike in December 2002 resulted in an increase in the world price of crude oil. However, in the short term, the volume loss probably affected the United States more than most other areas. This country receives more than half of Venezuela's crude and product exports, and replacing the lost volumes proved difficult. U.S. imports of Venezuelan crude oil dropped significantly in December 2002 relative to other years

151

2000 TMS Fall Extraction and Process Metallurgy Meeting ...  

Science Conference Proceedings (OSTI)

TMS Logo. 2000 TMS Fall Extraction and Process Metallurgy Meeting: Registration Information. 2000 TMS FALL EXTRACTION AND PROCESS METALLURGY ...

152

Real time loss detection for SNM in process  

Science Conference Proceedings (OSTI)

This paper discusses the basis of a design for real time special nuclear material (SNM) loss detectors. The design utilizes process measurements and signal processing techniques to produce a timely estimate of material loss. A state estimator is employed as the primary signal processing algorithm. Material loss is indicated by changes in the states or process innovations (residuals). The design philosophy is discussed in the context of these changes.

Candy, J.V.; Dunn, D.R.; Gavel, D.T.

1980-03-20T23:59:59.000Z

153

Impacts of Substation Transformer and Bus Configuration on Distribution Losses  

Science Conference Proceedings (OSTI)

The technical losses on Electricit de France (EDF) distribution networks are annually estimated at about 18 TWh. Since the costs for these losses are ultimately covered by the end-use tariff paid by the customers, EDF has many reasons to find a way to reduce them, including the desire to increase customer satisfaction, meet commitments for sustainable development, and anticipate future regulatory requirements. EDF has identified two main ways to reduce losses on distribution systems: developing new rules...

2009-03-26T23:59:59.000Z

154

Plasma end-loss studies on Scylla I-C  

SciTech Connect

The end-loss process in the collision dominated Scylla I-C plasma has been investigated with a local pressure sensitive diagnostic, integrated density measurement and axially arrayed diamagnetic loop probes. The development of a plasma loss orifice, well within the theta-pinch coil, has been identified. The magnitude of the observed orifice is found to be in excellent agreement with that predicted from collisional MHD theories. The axially flowing plasma is well confined until it flows through the loss orifice. After passing through the orifice, rapid axial expansion is observed. An indication of the existence of inward traveling rarefaction waves has been observed from the plasma midplane temperature data; an abrupt decrease in the plasma temperature at t approximately equal to 6.5 ..mu..s corresponds to the predicted time of arrival of rarefaction waves at the coil midplane. The plasma loss rate derived from the pressure data indicates an initial period (t < 4 ..mu..s) of rapid particle loss followed by a period (t > 4 ..mu..s) of gradual decay in the loss rate. This initial period of high loss rate is predicted from the MHD flow theories when the measured, time dependent plasma parameters are substituted into the analytical models. The loss rate determined from the end-on interferograms does not respond to the detailed structure of the plasma loss process.

McKenna, K.F.; York, T.M.

1976-08-01T23:59:59.000Z

155

A Study of Conversion Reactions Using Electron Energy Loss  

Science Conference Proceedings (OSTI)

In this study, conversion mechanism in NiO was studied using high resolution transmission electron microscopy and electron energy loss spectroscopy (EELS).

156

Analysis of beam loss induced abort kicker instability  

SciTech Connect

Through more than a decade of operation, we have noticed the phenomena of beam loss induced kicker instability in the RHIC beam abort systems. In this study, we analyze the short term beam loss before abort kicker pre-fire events and operation conditions before capacitor failures. Beam loss has caused capacitor failures and elevated radiation level concentrated at failed end of capacitor has been observed. We are interested in beam loss induced radiation and heat dissipation in large oil filled capacitors and beam triggered thyratron conduction. We hope the analysis result would lead to better protection of the abort systems and improved stability of the RHIC operation.

Zhang W.; Sandberg, J.; Ahrens, L.; Fischer, W.; Hahn, H.; Mi, J.; Pai, C.; Tan, Y.

2012-05-20T23:59:59.000Z

157

Instrumentation for Evaluating PV System Performance Losses from Snow: Preprint  

DOE Green Energy (OSTI)

Describes the use of a pyranometer with a heater and a digital camera to determine losses related to snow for PV systems located at National Renewable Energy Laboratory.

Marion, B.; Rodriguez, J.; Pruett, J.

2009-04-01T23:59:59.000Z

158

Correlation Of Surface Heat Loss And Total Energy Production...  

Open Energy Info (EERE)

Facebook icon Twitter icon Correlation Of Surface Heat Loss And Total Energy Production For Geothermal Systems Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home...

159

POWER PLANT WATER USAGE AND LOSS STUDY - Final  

NLE Websites -- All DOE Office Websites (Extended Search)

POWER PLANT WATER USAGE AND LOSS STUDY August 2005 Revised May 2007 Prepared for: The United States Department of Energy National Energy Technology Laboratory DOE Gasification...

160

Impacts of the Venezuelan Crude Oil Production Loss  

U.S. Energy Information Administration (EIA)

Energy Information Administration 1 Impacts of the Venezuelan Crude Oil Production Loss ... The gravity increased most at the ConocoPhillips Sweeny ...

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Hybrid Electric Vehicle Control Strategy Based on Power Loss Calculations.  

E-Print Network (OSTI)

??Defining an operation strategy for a Split Parallel Architecture (SPA) Hybrid Electric Vehicle (HEV) is accomplished through calculating powertrain component losses. The results of these… (more)

Boyd, Steven J

2006-01-01T23:59:59.000Z

162

Scientific assessment of coastal wetland loss, restoration and ...  

U.S. Energy Information Administration (EIA)

Get this from a library! Scientific assessment of coastal wetland loss, restoration and management in Louisiana. [Donald F Boesch; Louisiana State ...

163

Trends and causes of historical wetland loss in coastal ...  

U.S. Energy Information Administration (EIA)

Get this from a library! Trends and causes of historical wetland loss in coastal Louisiana. [Julie Christine Bernier; Geological Survey (U.S.),

164

Abatement of wetland loss in Louisiana through diversions of ...  

U.S. Energy Information Administration (EIA)

Get this from a library! Abatement of wetland loss in Louisiana through diversions of Mississippi River water using siphons. [David W Roberts; ...

165

Primary causes of wetland loss at Madison Bay, Terrebonne ...  

U.S. Energy Information Administration (EIA)

Get this from a library! Primary causes of wetland loss at Madison Bay, Terrebonne Parish, Louisiana. [Robert A Morton; Ginger Tiling; Nicholas F ...

166

Neutral Oil Loss During Alkali Refining - ResearchGate  

U.S. Energy Information Administration (EIA)

Neutral Oil Loss During Alkali Refining. Albert J. Dijkstra. Journal of Oil & Fat Industries (Impact ... Experiments with cotton oil and soybean o ...

167

UPDATE: Oil set for longest weekly loss streak since 1998  

U.S. Energy Information Administration (EIA)

UPDATE: Oil set for longest weekly loss streak since 1998,Read most current stock market news, Get stock, fund, etf analyst reports from an ...

168

IMPACT Loss Prevention Software - Syntex Management Systems, Inc.  

U.S. Energy Information Administration (EIA)

Developed by Houston's Syntex Management Systems, IMPACT Loss Prevention Software is quickly becoming a standard in the oil and gas industry

169

Mitigating greenhouse gas and nitrogen loss with improved fertilizer ...  

Science Conference Proceedings (OSTI)

impacts on greenhouse gas (GHG) emission, N loss and economic implication are rarely analysed. A decision support system (DSS) has been developed to.

170

Comparative evaluation of two extraction procedures: The TCLP and the EP. Rept. for 1 Oct 86-30 Sep 89  

Science Conference Proceedings (OSTI)

Two studies were conducted to compare the results of the Toxicity Characteristic Leaching Procedure (TCLP) with those of the Extraction Procedure Toxicity Characteristic (EP). In the first study, a synthetic heavy metal waste was chemically solidified/stabilized with and without a variety of interfering compounds. The solidified/stabilized waste was cured for 28 days and subjected to the TCLP and EP extractions. The extracts were analyzed for Cd, Cr, Ni, and Hg. In the second study, two solidified/stabilized, heavy metal wastes and an untreated perchloroethene (PCE) still-bottom waste were used. Twelve volatile organic compounds were added to each waste type at two ratios. The EP and TCLP were performed on three samples from each waste type. The extract from each sample was analyzed for As, Ag, Ba, Cd, Cu, Ni, Pb, and Zn and the 12 volatile organic compounds. The losses due to the mechanics of the TCLP and EP extracts with know concentrations of organic compounds before and after extracting the wastes. Results of these studies indicate that, for most of the metal contaminants, the TCLP and EP produce similar results when TCLP extraction fluid 2 (acetic acid solution) is used but differ when TCLP extraction fluid 1 (acetate buffer) is used. The results of testing for volatile organic contaminants indicate that, for 8 of the 12 contaminants, the concentrations measured in the TCLP leachates were significantly greater that those measured in the EP leachates.

Bricka, R.M.; Holmes, T.T.; Cullinane, M.J.

1991-09-01T23:59:59.000Z

171

Combined transuranic-strontium extraction process  

DOE Patents (OSTI)

The transuranic (TRU) elements neptunium, plutonium and amercium can be separated together with strontium from nitric acid waste solutions in a single process. An extractant solution of a crown ether and an alkyl(phenyl)-N.N-dialkylcarbanylmethylphosphine oxide in an appropriate diluent will extract the TRU`s to gather with strontium, uranium and technetium. The TRU`s and the strontium can then be selectively stripped from the extractant for disposal.

Horwitz, E.P.; Dietz, M.L.

1991-12-31T23:59:59.000Z

172

Combined transuranic-strontium extraction process  

DOE Patents (OSTI)

The transuranic (TRU) elements neptunium, plutonium and americium can be separated together with strontium from nitric acid waste solutions in a single process. An extractant solution of a crown ether and an alkyl(phenyl)-N,N-dialkylcarbanylmethylphosphine oxide in an appropriate diluent will extract the TRU's together with strontium, uranium and technetium. The TRU's and the strontium can then be selectively stripped from the extractant for disposal. 3 figs.

Horwitz, E.P.; Dietz, M.L.

1992-12-08T23:59:59.000Z

173

Combined transuranic-strontium extraction process  

DOE Patents (OSTI)

The transuranic (TRU) elements neptunium, plutonium and americium can be separated together with strontium from nitric acid waste solutions in a single process. An extractant solution of a crown ether and an alkyl(phenyl)-N,N-dialkylcarbanylmethylphosphine oxide in an appropriate diluent will extract the TRU's together with strontium, uranium and technetium. The TRU's and the strontium can then be selectively stripped from the extractant for disposal.

Horwitz, E. Philip (Naperville, IL); Dietz, Mark L. (Evanston, IL)

1992-01-01T23:59:59.000Z

174

Method of Lipid Extraction - Energy Innovation Portal  

A method of extracting lipids from wet algae, the method includes hydrolyzing a slurry comprising algae and water by adding an acidic hydrolyzing agent to yield an ...

175

SOLVENT EXTRACTION PROCESS FOR URANIUM RECOVERY  

DOE Patents (OSTI)

A process is described for extracting uranium from uranium ore, wherein the uranium is substantially free from molybdenum contamination. In a solvent extraction process for recovering uranium, uranium and molybdenum ions are extracted from the ore with ether under high acidity conditions. The ether phase is then stripped with water at a lower controiled acidity, resaturated with salting materials such as sodium nitrate, and reextracted with the separation of the molybdenum from the uranium without interference from other metals that have been previously extracted.

Clark, H.M.; Duffey, D.

1958-06-17T23:59:59.000Z

176

2006 TMS Fall Extraction and Processing Meeting  

Science Conference Proceedings (OSTI)

2006 TMS Fall Extraction & Processing Meeting: Sohn Int'l Symposium ... Sold out. Hyatt Regency Islandia Hotel In the heart of Mission Bay Park, the Hyatt has  ...

177

Extraction of Aromatic Hydrocarbons with Triethylene Glycol ...  

Science Conference Proceedings (OSTI)

introduced in LG 35-8/300B benzene reforming unit. (Kirishinefteorgsintez Production Association). The sulfolane content in the extractant was gradually brought ...

178

X-Man Data Extraction System  

Current Weather. Protocol Office. Where to stay. Tri-Valley Visitors Bureau. ... X-Man offers the following advantages over existing data extraction tools:

179

Global crop yield losses from recent warming  

Science Conference Proceedings (OSTI)

Global yields of the world-s six most widely grown crops--wheat, rice, maize, soybeans, barley, sorghum--have increased since 1961. Year-to-year variations in growing season minimum temperature, maximum temperature, and precipitation explain 30% or more of the variations in yield. Since 1991, climate trends have significantly decreased yield trends in all crops but rice, leading to foregone production since 1981 of about 12 million tons per year of wheat or maize, representing an annual economic loss of $1.2 to $1.7 billion. At the global scale, negative impacts of climate trends on crop yields are already apparent. Annual global temperatures have increased by {approx}0.4 C since 1980, with even larger changes observed in several regions (1). While many studies have considered the impacts of future climate changes on food production (2-5), the effects of these past changes on agriculture remain unclear. It is likely that warming has improved yields in some areas, reduced them in others, and had negligible impacts in still others; the relative balance of these effects at the global scale is unknown. An understanding of this balance would help to anticipate impacts of future climate changes, as well as to more accurately assess recent (and thereby project future) technologically driven yield progress. Separating the contribution of climate from concurrent changes in other factors--such as crop cultivars, management practices, soil quality, and atmospheric carbon dioxide (CO{sub 2}) levels--requires models that describe the response of yields to climate. Studies of future global impacts of climate change have typically relied on a bottom-up approach, whereby field scale, process-based models are applied to hundreds of representative sites and then averaged (e.g., ref 2). Such approaches require input data on soil and management conditions, which are often difficult to obtain. Limitations on data quality or quantity can thus limit the utility of this approach, especially at the local scale (6-8). At the global scale, however, many of the processes and impacts captured by field scale models will tend to cancel out, and therefore simpler empirical/statistical models with fewer input requirements may be as accurate (8, 9). Empirical/statistical models also allow the effects of poorly modeled processes (e.g., pest dynamics) to be captured and uncertainties to be readily quantified (10). Here we develop new, empirical/statistical models of global yield responses to climate using datasets on broad-scale yields, crop locations, and climate variability. We focus on global average yields for the six most widely grown crops in the world: wheat, rice, maize, soybeans, barley, and sorghum. Production of these crops accounts for over 40% of global cropland area (11). 55% of non-meat calories, and over 70% of animal feed (12).

Lobell, D; Field, C

2006-06-02T23:59:59.000Z

180

Design of artificial neural networks for distribution feeder loss analysis  

Science Conference Proceedings (OSTI)

To enhance the efficiency for power loss analysis of voluminous distribution feeders, ANN-based simplified power loss models with the Levenberg-Marquardt (LM) algorithm have been developed for overhead feeders and underground feeders, respectively. The ... Keywords: Artificial neural network, Customer information system, Levenberg-Marquardt algorithm, Outage management system

Tsung-En Lee; Chin-Ying Ho; Chia-Hung Lin; Meei-Song Kang

2011-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Testing a Model of IR Radiative Losses: Preprint  

DOE Green Energy (OSTI)

Thermopile pyranometers exhibit IR radiative losses that affect global and diffuse shortwave measurements made with first class thermopile based instruments. Pyrgeometers can be used to measure the sky temperature and are used to calculate the pyranometer?s IR radiative losses.

Vignola, F.; Long, C. N.; Reda, I.

2009-08-01T23:59:59.000Z

182

MODELING OF EDDY CURRENT LOSS AND TEMPERATURE OF THE MAGNETS  

E-Print Network (OSTI)

(SPMSM); interior magnet PM motors; time-stepped ÂŻnite-element analysis (FEA); thermal circuits in traditional motor design and analysis. However, due to the high conductivity of the rare-earth magnet, neody-element analysis (FEA) for the calculation of eddy current loss in the magnet. Based on the calculated losses

Mi, Chunting "Chris"

183

The Modeling of Slurry Friction Loss of Hydraulic Fracturing  

Science Conference Proceedings (OSTI)

In recent years, the research on theoretical model of hydraulic fracturing has experienced development. But there is little progress in the research on slurry friction loss in the fracturing string, which is the key to guide the design and construction ... Keywords: slurry, friction loss, momentum transfer

Yongming Li; Hu Mao; Fengsheng Yao; Song Wang; Jinzhou Zhao

2011-10-01T23:59:59.000Z

184

Poker Player Behavior After Big Wins and Big Losses  

Science Conference Proceedings (OSTI)

We find that experienced poker players typically change their style of play after winning or losing a big pot---most notably, playing less cautiously after a big loss, evidently hoping for lucky cards that will erase their loss. This finding is consistent ... Keywords: break-even hypothesis, investment, prospect theory, risk

Gary Smith; Michael Levere; Robert Kurtzman

2009-09-01T23:59:59.000Z

185

Kalman filter model for determining block and trickle SNM losses  

Science Conference Proceedings (OSTI)

This paper describes an integrated decision procedure for deciding whether a diversion of SNM has occurred. Two possible types of diversion are considered: a block loss during a single time period and a cumulative trickle loss over several time periods. The methodology used is based on a compound Kalman filter model. Numerical examples will illustrate our approach.

Barlow, R.E.; Durst, M.J.; Smiriga, N.G.

1982-04-20T23:59:59.000Z

186

AC Losses in the New High-Temperature Superconductors  

Science Conference Proceedings (OSTI)

This report addresses the properties of high-temperature ceramic oxide superconductors in low magnetic fields. It discusses ac losses in the superconducting and normal states, the influence of anisotropy, and a database for monitoring advances in superconductivity. The ac losses of the oxide superconductors were found to be excessive.

1989-03-17T23:59:59.000Z

187

Linear-optics manipulations of photon-loss codes  

E-Print Network (OSTI)

We discuss codes for protecting logical qubits carried by optical fields from the effects of amplitude damping, i.e. linear photon loss. We demonstrate that the correctability condition for one-photon loss imposes limitations on the range of manipulations than can be implemented with passive linear-optics networks.

Konrad Banaszek; Wojciech Wasilewski

2007-02-09T23:59:59.000Z

188

Natural Gas Total Liquids Extracted  

U.S. Energy Information Administration (EIA) Indexed Site

Thousand Barrels) Thousand Barrels) Data Series: Natural Gas Processed Total Liquids Extracted NGPL Production, Gaseous Equivalent Period: Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Data Series Area 2007 2008 2009 2010 2011 2012 View History U.S. 658,291 673,677 720,612 749,095 792,481 873,563 1983-2012 Alabama 13,381 11,753 11,667 13,065 1983-2010 Alaska 22,419 20,779 19,542 17,798 18,314 18,339 1983-2012 Arkansas 126 103 125 160 212 336 1983-2012 California 11,388 11,179 11,042 10,400 9,831 9,923 1983-2012 Colorado 27,447 37,804 47,705 57,924 1983-2010 Florida 103 16 1983-2008 Illinois 38 33 24 231 705 0 1983-2012

189

Surface and bulk modified high capacity layered oxide cathodes with low irreversible capacity loss  

DOE Patents (OSTI)

The present invention includes compositions, surface and bulk modifications, and methods of making of (1-x)Li[Li.sub.1/3Mn.sub.2/3]O.sub.2.xLi[Mn.sub.0.5-yNi.sub.0.5-yCo.sub.2- y]O.sub.2 cathode materials having an O3 crystal structure with a x value between 0 and 1 and y value between 0 and 0.5, reducing the irreversible capacity loss in the first cycle by surface modification with oxides and bulk modification with cationic and anionic substitutions, and increasing the reversible capacity to close to the theoretical value of insertion/extraction of one lithium per transition metal ion (250-300 mAh/g).

Manthiram, Arumugam (Austin, TX); Wu, Yan (Austin, TX)

2010-03-16T23:59:59.000Z

190

Enhancing clinical concept extraction with distributional semantics  

Science Conference Proceedings (OSTI)

Extracting concepts (such as drugs, symptoms, and diagnoses) from clinical narratives constitutes a basic enabling technology to unlock the knowledge within and support more advanced reasoning applications such as diagnosis explanation, disease progression ... Keywords: Clinical informatics, Distributional semantics, Information extraction, NER, NLP

Siddhartha Jonnalagadda; Trevor Cohen; Stephen Wu; Graciela Gonzalez

2012-02-01T23:59:59.000Z

191

A weighting scheme for open information extraction  

Science Conference Proceedings (OSTI)

We study the problem of extracting all possible relations among named entities from unstructured text, a task known as Open Information Extraction (Open IE). A state-of-the-art Open IE system consists of natural language processing tools to identify ...

Yuval Merhav

2012-06-01T23:59:59.000Z

192

Extracting and classifying Urdu multiword expressions  

Science Conference Proceedings (OSTI)

This paper describes a method for automatically extracting and classifying multiword expressions (mWEs) for Urdu on the basis of a relatively small unannotated corpus (around 8.12 million tokens). The mWEs are extracted by an unsupervised method and ...

Annette Hautli; Sebastian Sulger

2011-06-01T23:59:59.000Z

193

A spreadsheet algorithm for stagewise solvent extraction  

SciTech Connect

Part of the novelty is the way in which the problem is organized in the spreadsheet. In addition, to facilitate spreadsheet setup, a new calculational procedure has been developed. The resulting Spreadsheet Algorithm for Stagewise Solvent Extraction (SASSE) can be used with either IBM or Macintosh personal computers as a simple yet powerful tool for analyzing solvent extraction flowsheets.

Leonard, R.A.; Regalbuto, M.C.

1993-01-01T23:59:59.000Z

194

Accelerating line extraction based on GPU  

Science Conference Proceedings (OSTI)

A new line extraction accelerating algorithm based upon graphics processing units (GPUs) is presented. Several techniques are proposed to optimize the GPU computation. Among those improvements, the most important one is the use of "seed pixels", which ... Keywords: GPU, line extraction, parallel processing, phase-based grouping

Li Yu; Xiao'an Tang; Bo Tang

2011-12-01T23:59:59.000Z

195

Membrane Extraction for Detoxification of Biomass Hydrolysates  

Science Conference Proceedings (OSTI)

Membrane extraction was used for the removal of sulfuric acid, acetic acid, 5-hydroxymethyl furfural and furfural from corn stover hydrolyzed with dilute sulfuric acid. Microporous polypropylene hollow fiber membranes were used. The organic extractant consisted of 15% Alamine 336 in: octanol, a 50:50 mixture of oleyl alcohol:octanol or oleyl alcohol. Rapid removal of sulfuric acid, 5-hydroxymethyl and furfural was observed. The rate of acetic acid removal decreased as the pH of the hydrolysate increased. Regeneration of the organic extractant was achieved by back extraction into an aqueous phase containing NaOH and ethanol. A cleaning protocol consisting of flushing the hydrolysate compartment with NaOH and the organic phase compartment with pure organic phase enabled regeneration and reuse of the module. Ethanol yields from hydrolysates detoxified by membrane extraction using 15% Alamine 336 in oleyl alcohol were about 10% higher than those from hydrolysates detoxified using ammonium hydroxide treatment.

Grzenia, D. L.; Schell, D. J.; Wickramasinghe, S. R.

2012-05-01T23:59:59.000Z

196

Surface Microstructure Extraction from Multiple Aerial Images  

E-Print Network (OSTI)

In this paper we present a system that recovers building facet images from multiple source images and, as a first step towards detailed analysis of microstructures, extracts windows from walls. The system employs a sophisticated multi-image texture mapping technique to eliminate the corrupting effects of shadows and occlusions and to find a "best piece representation" of each facet. The system is model-driven, providing a context-based environment for microstructure analysis. The window extraction module focuses attention on wall facets, attempting to extract the 2-D window patterns attached to the walls using an oriented region growing technique. High-level knowledge is incorporated to simplify the computation of symbolic window extraction. The algorithms are typically useful in urban sites. Experiments show successful applications of this approach to site model refinement. Keywords: microstructure extraction, model refinement, texture mapping, aerial imagery, image understanding 1 I...

Xiaoguang Wang; Robert T. Collins; Jeff Dehart

1997-01-01T23:59:59.000Z

197

Application of extraction chromatography to actinide decontamination of hydrochloric acid effluent streams  

SciTech Connect

Extraction chromatography is under development as a method to lower actinide activity levels in effluent steams. Successful application of this technique for radioactive liquid waste treatment would provide a low activity feed stream for HCl recycle, reduce the loss of radioactivity to the environment in aqueous effluents, and would lower the quantity and reduce the hazard of the associated solid waste. The extraction of Pu and Am from HCl solutions was examined for several commercial and laboratory-produced sorbed resin materials. Inert supports included silica and polymer beads of differing mesh sizes. The support material was coated with either n-octyl(phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide (O-CMPO) or di-(4-t-butylphenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide (D-CMPO) as an extractant, and using either tributyl phosphate (TBP) or diamyl amylphosphonate (DAAP) as a diluent. Solutions tested were effluent streams generated by ion exchange and solvent extraction recovery of Pu. A finer mesh silica support material demonstrated advantages in removal of trivalent Am in some tests, but also showed a tendency toward plugging and channeling as column sizes and flow rates were increased. Larger bead sizes showed better physical properties as the process was scaled up to removal of gram quantities of Am from large effluent volumes. The ratio of extractant to diluent also appeared to play a role in the retention of Am. In direct comparative studies, when loaded on identical supports and diluent conditions, D-CMPO demonstrated better Am retention than O-CMPO from HCl process effluents.

Schulte, L.D.; McKee, S.D.; Salazar, R.R.

1996-05-01T23:59:59.000Z

198

The temperature dependence of ultra-cold neutron wall losses in material bottles coated with deuterated polystryene  

Science Conference Proceedings (OSTI)

Ultra-cold neutrons (UCN) from the LANSCE super-thermal deuterium source were used to fill an acrylic bottle coated with deuterated polystyrene. The bottle was constructed to minimize losses through the filling valve. The storage time was extracted from a series of measurements where the number of neutrons was counted after they were held in the bottle for durations varying from 60-1200 s. The data were collected at temperatures of 18, 40, 65, 105, and 295 K. The data has been analyzed in terms of the ratio of the imaginary to real part of the wall potential. The analysis considers the velocity dependence of the probability per bounce of wall loss. The implication of these measurements for the SNS electric dipole moment search will be presented.

Cooper, Martiin D [Los Alamos National Laboratory; Bagdasarova, Yelena [Los Alamos National Laboratory; Clayton, Steven M [Los Alamos National Laboratory; Currie, Scott A [Los Alamos National Laboratory; Griffith, William C [Los Alamos National Laboratory; Ito, Takeyasu [Los Alamos National Laboratory; Makela, Mark F [Los Alamos National Laboratory; Morris, Cheistopher [Los Alamos National Laboratory; Rahaman, Mohamad S [Los Alamos National Laboratory; Ramsey, John C [Los Alamos National Laboratory; Saunders, Alexander [Los Alamos National Laboratory; Rios, Raymond [IDAHO STATE UNIV.

2011-01-18T23:59:59.000Z

199

Beam Loss Monitors for NSLS-II Storage Ring  

SciTech Connect

The shielding for the NSLS-II storage ring will provide adequate protection for the full injected beam losses in two cells of the ring around the injection point, but the remainder of the ring is shielded for lower losses of <10% top-off injection beam current. This will require a system to insure that beam losses do not exceed levels for a period of time that could cause excessive radiation exposure outside the shield walls. This beam Loss Control and Monitoring system will have beam loss monitors that will measure where the beam charge is lost around the ring, to warn operators if losses approach the design limits. To measure the charge loss quantitatively, we propose measuring the electron component of the shower as beam electrons hit the vacuum chamber (VC) wall. This will be done using the Cerenkov light as electrons transit ultra-pure fused silica rods placed close to the inner edge of the VC. The entire length of the rod will collect light from the electrons of the spread out shower resulting from the small glancing angle of the lost beam particles to the VC wall. The design and measurements results of the prototype Cerenkov BLM will be presented.

Kramer, S.L.; Cameron, P.

2011-03-28T23:59:59.000Z

200

Design of the ILC RTML Extraction Lines  

SciTech Connect

The ILC [1] Damping Ring to the Main Linac beamline (RTML) contains three extraction lines (EL). Each EL can be used both for an emergency abort dumping of the beam and tune-up continual train-by-train extraction. Two of the extraction lines are located downstream of the first and second stages of the RTML bunch compressor, and must accept both compressed and uncompressed beam with energy spreads of 2.5% and 0.15%, respectively. In this paper we report on an optics design that allowed minimizing the length of the extraction lines while offsetting the beam dumps from the main line by the distance required for acceptable radiation levels in the service tunnel. The proposed extraction lines can accommodate beams with different energy spreads while at the same time providing the beam size acceptable for the aluminum dump window. The RTML incorporates three extraction lines, which can be used for either an emergency beam abort or for a train-by-train extraction. The first EL is located downstream of the Damping Ring extraction arc. The other two extraction lines are located downstream of each stage of the two-stage bunch compressor. The first extraction line (EL1) receives 5GeV beam with an 0.15% energy spread. The extraction line located downstream of the first stage of bunch compressor (ELBC1) receives both compressed and uncompressed beam, and therefore must accept beam with both 5 and 4.88GeV energy, and 0.15% and 2.5% energy spread, respectively. The extraction line located after the second stage of the bunch compressor (ELBC2) receives 15GeV beam with either 0.15 or 1.8% energy spread. Each of the three extraction lines is equipped with the 220kW aluminum ball dump, which corresponds to the power of the continuously dumped beam with 5GeV energy, i.e., the beam trains must be delivered to the ELBC2 dump at reduced repetition rate.

Seletskiy, S.; Tenenbaum, P.; Walz, D.; /SLAC; Solyak, N.; /Fermilab

2011-10-17T23:59:59.000Z

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

POWER PLANT WATER USAGE AND LOSS STUDY - Final  

NLE Websites -- All DOE Office Websites (Extended Search)

POWER PLANT WATER USAGE AND LOSS STUDY POWER PLANT WATER USAGE AND LOSS STUDY August 2005 Revised May 2007 Prepared for: The United States Department of Energy National Energy Technology Laboratory DOE Gasification Technology Manager: Gary J. Stiegel DOE Project Manager: James R. Longanbach Project Manager: Michael D. Rutkowski Principal Investigators: Michael G. Klett Norma J. Kuehn Ronald L. Schoff Vladimir Vaysman Jay S. White Power Plant Water Usage and Loss Study i August 2005 TABLE OF CONTENTS TABLE OF CONTENTS ...................................................................................................................... I LIST OF TABLES.............................................................................................................................III

202

Stepwise method determines source of FCC catalyst losses  

Science Conference Proceedings (OSTI)

A set of guidelines for fluid catalytic cracking unit (FCCU) monitoring and a logical, stepwise approach to troubleshooting FCC catalyst losses is discussed. This will help process or operations engineers find the causes of such losses. A thorough understanding of the entire catalyst stem during normal operations establishes the base line data necessary for troubleshooting. A comprehensive, ongoing analysis of catalyst losses include: catalyst balance, fresh catalyst physical properties, equilibrium catalyst properties, fine particle size distribution, pressure surveys, and line and restriction orifice records. The paper goes on to identify each step in monitoring these operations and properties.

Fletcher, R. [Akzo-Nobel Chemicals Inc., Houston, TX (United States)

1995-08-28T23:59:59.000Z

203

PAPER 2004-028 The Effect of Bitumen Extraction  

E-Print Network (OSTI)

processing: extraction and froth treatment. The most common extraction process is hot water bitumen performed using a Batch Extraction Unit (BEU) or a Denver Cell (DC) following the Syncrude standard extraction procedures(1) . The BEU is a low-shear laboratory approximation of the Clark hot water extraction

Schramm, Laurier L.

204

Energy extraction operations: some preliminary results  

DOE Green Energy (OSTI)

An experimental project being conducted by the Los Alamos Scientific Laboratory (LASL) has extracted thermal energy from Precambrian granitic rock by injection and circulating water through fractured zones or reservoirs. Two boreholes were drilled to depths of about 3 km (10,000 ft) in a location selected for high heat flow and an apparent lack of faulting. Bottom-hole temperature was 205/sup 0/C (400/sup 0/F). The holes were connected at depth by hydraulic fracturing to form a flow path and heat extraction surface. Energy has been extracted at rates exceeding 5 MW(t) in three operations totaling 2847 h. These operations are summarized.

Hendron, R.H.

1979-01-01T23:59:59.000Z

205

SEPARATION OF THORIUM FROM URANIUM BY EXTRACTION  

DOE Patents (OSTI)

A method is presented for the recovery and separation of uranium and thorium values contained in an aqueous nitric acid solution which is more than 3 M in nitric acid. The uranium and thorium containing solution preferable about 7 M in nitric acid is contacted with tributyl phosphatekerosene mixture. Both U and Th are extracted by the immiscible organic. After phase separation the Th is selectively back extracted by contacting with an aqueous nitric acid solution preferably between 0.1 to 1.5 M in nitric acid. The uranium which is still in the organic extractant phase may be recovered by contacting with water.

Bohlmann, E.G.

1959-07-28T23:59:59.000Z

206

A Spreadsheet Algorithm for Stagewise Solvent Extraction  

SciTech Connect

The material balance and equilibrium equations for solvent extraction processes have been combined with computer spreadsheets in a new way so that models for very complex multicomponent multistage operations can be setup and used easily. A part of the novelty is the way in which the problem is organized in the spreadsheet. In addition, to facilitate spreadsheet setup, a new calculational procedure has been developed. The resulting Spreadsheet Algorithm for Stagewise Solvent Extraction (SASSE) can be used with either IBM or Macintosh personal computers as a simple yet powerful tool for analyzing solvent extraction flowsheets.

Leonard, R.A.; Regalbuto, M.C.

1993-08-01T23:59:59.000Z

207

Comparisons of Interception Loss from Tropical and Temperate Vegetation Canopies  

Science Conference Proceedings (OSTI)

A multilayer crop model is used to investigate interception loss from oak, pine, wheat and grass canopies. It is shown that the evaporative properties of the full oak canopy are similar to those of the evergreen tropical rain forest. Evaporation ...

J. G. Lockwood; P. J. Sellers

1982-10-01T23:59:59.000Z

208

Partition of energy Loss from the Barotropic Tide in Fjords  

Science Conference Proceedings (OSTI)

As the barotropic tide propagates into and out of a fjord, it loses energy to friction, internal tides and high-frequency internal waves. Estimates of these losses for three British Columbia fjords, using current meter data, indicate that ...

B. De Young; S. Pond

1989-02-01T23:59:59.000Z

209

Vision Loss: Visual Impairment and Vision Impairment | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Vision Loss: Visual Impairment and Vision Impairment Vision Loss: Visual Impairment and Vision Impairment Vision Loss: Visual Impairment and Vision Impairment Visual impairment or vision impairment is vision loss that constitutes a significant limitation of visual capability resulting from disease, trauma, or a congenital or degenerative condition that cannot be corrected by conventional means, including refractive correction, medication, or surgery. Low Vision Anyone with non-correctable reduced vision is considered to be visually impaired, and can have a wide range of causes. Blindness Blindness is the condition of lacking visual perception due to physiological or psychological factors. Hearing Impairment Hearing impairment is a full or partial decrease in the ability to detect or understand sounds. Losing the ability to detect some frequencies, or

210

STAFF PAPER A Review of Transmission Losses in  

E-Print Network (OSTI)

STAFF PAPER A Review of Transmission Losses in Planning Studies Lana Wong Electricity Analysis Office Electricity Supply Analysis Division California Energy Commission would like to acknowledge the following individuals for providing their insight into transmission

211

Forecasting photovoltaic array power production subject to mismatch losses  

Science Conference Proceedings (OSTI)

The development of photovoltaic (PV) energy throughout the world this last decade has brought to light the presence of module mismatch losses in most PV applications. Such power losses, mainly occasioned by partial shading of arrays and differences in PV modules, can be reduced by changing module interconnections of a solar array. This paper presents a novel method to forecast existing PV array production in diverse environmental conditions. In this approach, field measurement data is used to identify module parameters once and for all. The proposed method simulates PV arrays with adaptable module interconnection schemes in order to reduce mismatch losses. The model has been validated by experimental results taken on a 2.2 kW{sub p} plant, with three different interconnection schemes, which show reliable power production forecast precision in both partially shaded and normal operating conditions. Field measurements show interest in using alternative plant configurations in PV systems for decreasing module mismatch losses. (author)

Picault, D.; Raison, B.; Bacha, S. [Grenoble Electrical Engineering Laboratory (G2Elab), 961, rue Houille Blanche BP 46, 38402 St Martin d'Heres (France); de la Casa, J.; Aguilera, J. [Grupo de Investigacion IDEA, Departamento de Electronica, Escuela Politecnica Superior, Universidad de Jaen, Campus Las Lagunillas, 23071 Jaen (Spain)

2010-07-15T23:59:59.000Z

212

Compression effects on pressure loss in flexible HVAC ducts  

E-Print Network (OSTI)

to Determine Flow Resistance of HVAC Air Ducts and Fittings.Pressure Loss in Flexible HVAC Ducts Bass Abushakra, Ph.D.to Determine Flow Resistance of HVAC Air Ducts and Fittings.

Abushakra, Bass; Walker, Iain S.; Sherman, Max H.

2002-01-01T23:59:59.000Z

213

Return channel loss reduction in multi-stage centrifugal compressors  

E-Print Network (OSTI)

This thesis presents concepts for improving the performance of return channels in multi-stage centrifugal compressors. Geometries have been developed to reduce both separation and viscous losses. A number of different ...

Aubry, Anne-Raphaëlle

2012-01-01T23:59:59.000Z

214

Mode conversation losses in overmolded millimeter wave transmission lines  

E-Print Network (OSTI)

Millimeter wave transmission lines are integral components for many important applications like nuclear fusion and NMR spectroscopy. In low loss corrugated transmission lines propagating the HE,1 mode with a high waveguide ...

Tax, David S. (David Samuel)

2008-01-01T23:59:59.000Z

215

Beam Loss Control for the Fermilab Main Injector  

E-Print Network (OSTI)

From 2005 through 2012, the Fermilab Main Injector provided intense beams of 120 GeV protons to produce neutrino beams and antiprotons. Hardware improvements in conjunction with improved diagnostics allowed the system to reach sustained operation at 400 kW beam power. Losses were at or near the 8 GeV injection energy where 95% beam transmission results in about 1.5 kW of beam loss. By minimizing and localizing loss, residual radiation levels fell while beam power was doubled. Lost beam was directed to either the collimation system or to the beam abort. Critical apertures were increased while improved instrumentation allowed optimal use of available apertures. We will summarize the impact of various loss control tools and the status and trends in residual radiation in the Main Injector.

Brown, Bruce C

2013-01-01T23:59:59.000Z

216

Process Modeling and Reduction of Copper Loss in Smelting Slag  

Science Conference Proceedings (OSTI)

The copper losses in RHF slag was more than 3% in 2006 and 2007. ... How to Control Strength and Grain Structure of 304L Stainless Steel during Forging .... Use of Polymeric Residues from the Footwear Industry in Layers of Asphalt ...

217

Abatement of wetland loss in Louisiana through diversions of ...  

U.S. Energy Information Administration (EIA)

Abatement of wetland loss in Louisiana through diversions of Mississippi River water using siphons (SuDoc I 19.76:92-274) [U.S. Geological Survey] on ...

218

EXAMINING PREFERENCES FOR PREVENTION OF LOUISIANAS WETLAND LOSS.  

E-Print Network (OSTI)

?? This study analyzed preferences for wetland-loss prevention in coastal Louisiana. Data were obtained through a contingent-valuation mail survey of a random sample of Louisiana… (more)

Moore, Ross Gordon

2010-01-01T23:59:59.000Z

219

A Modelling of Heat Losses in Aluminium Reduction Cell with ...  

Science Conference Proceedings (OSTI)

Using of anodes with slots chanegd that heat transfer to a great extent.In order to Investigate heat loss dynamics in reduction cells with slot anodes,a modelling ...

220

Initial measurements of fast ion loss in KSTAR  

Science Conference Proceedings (OSTI)

A fast ion loss detector (FILD) has been installed and tested in Korea Superconducting Tokamak Advanced Research (KSTAR). KSTAR FILD measures the energy and the pitch-angle of the escaping ions with the striking positions on the scintillator plane. Measurements of the fast ion loss have been performed for the neutral beam heated plasmas. Initial experimental results indicate the prompt losses from neutral beam are dominant and the effects of the resonant magnetic perturbation on the fast ion loss are investigated. In addition, further design change of the detector-head in order to avoid excessive heat load and to detect the fusion products or the fast ions having order of MeV of energy is also discussed.

Kim, Junghee; Yoon, S. W.; Kim, W. C. [National Fusion Research Institute, Daejeon 305-806 (Korea, Republic of); Kim, Jun Young [National Fusion Research Institute, Daejeon 305-806 (Korea, Republic of); Department of Nuclear Fusion and Plasma Science, University of Science and Technology, Daejeon 305-350 (Korea, Republic of); Garcia-Munoz, M. [Max-Planck-Institut fuer Plasmaphysik, EURATOM-Association IPP, Garching D-85748 (Germany); Isobe, M. [National Institute for Fusion Science, Toki-shi 509-5292 (Japan)

2012-10-15T23:59:59.000Z

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Further Results on Forecasting and Model Selection Under Asymmetric Loss  

E-Print Network (OSTI)

: We make three related contributions. First, we propose a new technique for solving prediction problems under asymmetric loss using piecewise-linear approximations to the loss function, and we establish existence and uniqueness of the optimal predictor. Second, we provide a detailed application to optimal prediction of a conditionally heteroskedastic process under asymmetric loss, the insights gained from which are broadly applicable. Finally, we incorporate our results into a general framework for recursive prediction-based model selection under the relevant loss function. Acknowledgements: Helpful discussion was provided by Adolf Buse, Hashem Pesaran, Dale Poirrier, Enrique Sentana, Jim Stock, Ken Wallis, participants at meetings of the Econometric Society World Congress, the NBER/NSF Forecasting Seminar, the UCSD Conference on Multivariate Financial Econometrics, and numerous university seminars. All remaining inadequacies are ours alone. We thank the National Science Foundation, t...

Peter F. Christoffersen; Francis X. Diebold

1996-01-01T23:59:59.000Z

222

An electron energy loss spectrometer designed for studies of electronic energy losses and spin waves in the large momentum regime  

Science Conference Proceedings (OSTI)

Based on 143 deg. electrostatic deflectors we have realized a new spectrometer for electron energy loss spectroscopy which is particularly suitable for studies on surface spin waves and other low energy electronic energy losses. Contrary to previous designs high resolution is maintained even for diffuse inelastic scattering due to a specific management of the angular aberrations in combination with an angle aperture. The performance of the instrument is demonstrated with high resolution energy loss spectra of surface spin waves on a cobalt film deposited on the Cu(100) surface.

Ibach, H. [Peter Gruenberg Institut PGI-3, Forschungszentrum Juelich, 52425 Juelich (Germany); Juelich Aachen Research Alliance - Fundamentals of Future Information Technologies (JARA-FIT), 52425 Juelich (Germany); Rajeswari, J.; Schneider, C. M. [Peter Gruenberg Institut PGI-6, Forschungszentrum Juelich, 52425 Juelich (Germany); Juelich Aachen Research Alliance - Fundamentals of Future Information Technologies (JARA-FIT), 52425 Juelich (Germany)

2011-12-15T23:59:59.000Z

223

An Analysis of Loss of Decay Heat Removal and Loss of Inventory Event Trends (1990-2009)  

Science Conference Proceedings (OSTI)

In recent years, there has been an observed increase in plant events during shutdown conditions. This has increased interest among the industry and the United States Nuclear Regulatory Commission to obtain a better understanding of the data and the trends. This report documents a long-term study of loss of decay heat removal and loss of inventory events during shutdown conditions in the nuclear industry, spanning a 20-year period from 1990 through 2009. The EPRI reports An Analysis of Loss of Decay Heat ...

2010-12-17T23:59:59.000Z

224

AC Loss Measurements on a 2G YBCO Coil  

SciTech Connect

The Oak Ridge National Laboratory (ORNL) is collaborating with Waukesha Electric Systems (WES) to continue development of HTS power transformers. For compatibility with the existing power grid, a commercially viable HTS transformer will have to operate at high voltages in the range of 138 kV and above, and will have to withstand 550-kV impulse voltages as well. Second-generation (2G) YBCO coated conductors will be required for an economically-competitive design. In order to adequately size the refrigeration system for these transformers, the ac loss of these HTS coils must be characterized. Electrical AC loss measurements were conducted on a prototype high voltage (HV) coil with co-wound stainless steel at 60 Hz in a liquid nitrogen bath using a lock-in amplifier technique. The prototype HV coil consisted of 26 continuous (without splice) single pancake coils concentrically centered on a stainless steel former. For ac loss measurement purposes, voltage tap pairs were soldered across each set of two single pancake coils so that a total of 13 separate voltage measurements could be made across the entire length of the coil. AC loss measurements were taken as a function of ac excitation current. Results show that the loss is primarily concentrated at the ends of the coil where the operating fraction of critical current is the highest and show a distinct difference in current scaling of the losses between low current and high current regimes.

Rey, Christopher M [ORNL; Duckworth, Robert C [ORNL; Schwenterly, S W [ORNL

2011-01-01T23:59:59.000Z

225

Extraction Steam Controls at EPLA-W  

E-Print Network (OSTI)

ExxonMobil's Baton Rouge site encompasses a world-scale refinery, chemical plant and third party power station. Historically, inflexible and unreliable control systems on two high-pressure, extracting/condensing steam turbines prevented the site from ful

Brinker, J. L.

2004-01-01T23:59:59.000Z

226

Fluidized bed gasification of extracted coal  

DOE Patents (OSTI)

Coal or similar carbonaceous solids are extracted by contacting the solids in an extraction zone (12) with an aqueous solution having a pH above 12.0 at a temperature between 65.degree. C. and 110.degree. C. for a period of time sufficient to remove bitumens from the coal into said aqueous solution and the extracted solids are then gasified at an elevated pressure and temperature in a fluidized bed gasification zone (60) wherein the density of the fluidized bed is maintained at a value above 160 kg/m.sup.3. In a preferred embodiment of the invention, water is removed from the aqueous solution in order to redeposit the extracted bitumens onto the solids prior to the gasification step.

Aquino, Dolores C. (Houston, TX); DaPrato, Philip L. (Westfield, NJ); Gouker, Toby R. (Baton Rouge, LA); Knoer, Peter (Houston, TX)

1986-01-01T23:59:59.000Z

227

Extractive summaries for educational science content  

Science Conference Proceedings (OSTI)

This paper describes an extractive summarizer for educational science content called COGENT. COGENT extends MEAD based on strategies elicited from an empirical study with domain and instructional experts. COGENT implements a hybrid approach integrating ...

Sebastian de la Chica; Faisal Ahmad; James H. Martin; Tamara Sumner

2008-06-01T23:59:59.000Z

228

Pedagogically useful extractive summaries for science education  

Science Conference Proceedings (OSTI)

This paper describes the design and evaluation of an extractive summarizer for educational science content called COGENT. COGENT extends MEAD based on strategies elicited from an empirical study with science domain and instructional design experts. COGENT ...

Sebastian de la Chica; Faisal Ahmad; James H. Martin; Tamara Sumner

2008-08-01T23:59:59.000Z

229

A Characteristic Extraction Tool for Gravitational Waveforms  

E-Print Network (OSTI)

We develop and calibrate a characteristic waveform extraction tool whose major improvements and corrections of prior versions allow satisfaction of the accuracy standards required for advanced LIGO data analysis. The extraction tool uses a characteristic evolution code to propagate numerical data on an inner worldtube supplied by a 3+1 Cauchy evolution to obtain the gravitational waveform at null infinity. With the new extraction tool, high accuracy and convergence of the numerical error can be demonstrated for an inspiral and merger of mass M binary black holes even for an extraction worldtube radius as small as R = 20M. The tool provides a means for unambiguous comparison between waveforms generated by evolution codes based upon different formulations of the Einstein equations and based upon different numerical approximations.

M. C. Babiuc; B. Szilagyi; J. Winicour; Y. Zlochower

2010-11-18T23:59:59.000Z

230

Polymers for metal extractions in carbon dioxide  

DOE Patents (OSTI)

A composition useful for the extraction of metals and metalloids comprises (a) carbon dioxide fluid (preferably liquid or supercritical carbon dioxide); and (b) a polymer in the carbon dioxide, the polymer having bound thereto a ligand that binds the metal or metalloid; with the ligand bound to the polymer at a plurality of locations along the chain length thereof (i.e., a plurality of ligands are bound at a plurality of locations along the chain length of the polymer). The polymer is preferably a copolymer, and the polymer is preferably a fluoropolymer such as a fluoroacrylate polymer. The extraction method comprises the steps of contacting a first composition containing a metal or metalloid to be extracted with a second composition, the second composition being as described above; and then extracting the metal or metalloid from the first composition into the second composition.

DeSimone, Joseph M. (7315 Crescent Ridge Dr., Chapel Hill, NC 27516); Tumas, William (1130 Big Rock Loop, Los Alamos, NM 87544); Powell, Kimberly R. (103 Timber Hollow Ct. Apartment 323, Chapel Hill, NC 27514); McCleskey, T. Mark (1930 Camino Mora, Los Alamos, NM 87544); Romack, Timothy J. (5810 Forest Ridge Dr., Durham, NC 27713); McClain, James B. (8530 Sommersweet La., Raleigh, NC 27612); Birnbaum, Eva R. (1930 Camino Mora, Los Alamos, NM 87544)

2001-01-01T23:59:59.000Z

231

Fluidized bed gasification of extracted coal  

DOE Patents (OSTI)

Coal or similar carbonaceous solids are extracted by contacting the solids in an extraction zone with an aqueous solution having a pH above 12.0 at a temperature between 65/sup 0/C and 110/sup 0/C for a period of time sufficient to remove bitumens from the coal into said aqueous solution, and the extracted solids are then gasified at an elevated pressure and temperature in a fluidized bed gasification zone (60) wherein the density of the fluidized bed is maintained at a value above 160 kg/m/sup 3/. In a preferred embodiment of the invention, water is removed from the aqueous solution in order to redeposit the extracted bitumens onto the solids prior to the gasification step. 2 figs., 1 tab.

Aquino, D.C.; DaPrato, P.L.; Gouker, T.R.; Knoer, P.

1984-07-06T23:59:59.000Z

232

Process for extracting technetium from alkaline solutions  

DOE Patents (OSTI)

This invention relates generally to a process for extracting technetium from nuclear wastes and more particularly to a process for extracting technetium from alkaline waste solutions containing technetium and high concentrations of alkali metal nitrates. A process for extracting technetium values from an aqueous alkaline solution containing at least one alkali metal hydroxide and at least one alkali metal nitrate comprises the steps of: contacting the aqueous alkaline solution with a solvent consisting of a crown ether in a diluent, the diluent being a water-immiscible organic liquid in which the crown ether is soluble, for a period of time sufficient to selectively extract the technetium values from the aqueous alkaline solution into the solvent; separating the solvent containing the technetium values from the aqueous alkaline solution; and stripping the technetium values from the solvent by contacting the solvent with water.

Moyer, B.A.; Sachleben, R.A.; Bonnesen, P.V.

1994-12-31T23:59:59.000Z

233

Recovery of Sugars by Solvent Extraction - Energy ...  

Researchers at the Joint BioEnergy Institute (JBEI) have developed a technology to extract 5C and 6C sugars directly at two points in an ionic liquid ...

234

PROCESS FOR PRODUCING ALKYL ORTHOPHOSPHORIC ACID EXTRACTANTS  

DOE Patents (OSTI)

A process is given for producing superior alkyl orthophosphoric acid extractants for use in solvent extraction methods to recover and purify various metals such as uranium and vanadium. The process comprises slurrying P/sub 2/O/ sub 5/ in a solvent diluent such as kerosene, benzene, isopropyl ether, and the like. An alipbatic alcohol having from nine to seventeen carbon atoms, and w- hcrein ihc OH group is situated inward of the terminal carbon atoms, is added to the slurry while the reaction temperature is mainiained below 60 deg C. The alcohol is added in the mole ratio of about 2 to l, alcohol to P/sub 2/O/sub 5/. A pyrophosphate reaotion product is formed in the slurry-alcohol mixture. Subsequently, the pyrophosphate reaction product is hydrolyzed with dilute mineral acid to produce the desired alkyl orthophosphoric aeid extractant. The extraetant may then be separated and utilized in metal-recovery, solvent- extraction processes. (AEC)

Grinstead, R.R.

1962-01-23T23:59:59.000Z

235

Alkaline earth cation extraction from acid solution  

DOE Patents (OSTI)

An extractant medium for extracting alkaline earth cations from an aqueous acidic sample solution is described as are a method and apparatus for using the same. The separation medium is free of diluent, free-flowing and particulate, and comprises a Crown ether that is a 4,4'(5')[C.sub.4 -C.sub.8 -alkylcyclohexano]18-Crown-6 dispersed on an inert substrate material.

Dietz, Mark (Elmhurst, IL); Horwitz, E. Philip (Naperville, IL)

2003-01-01T23:59:59.000Z

236

EIS-0271: Construction and Operation of a Tritium Extraction...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EIS-0271: Construction and Operation of a Tritium Extraction Facility at the Savannah Siver Site EIS-0271: Construction and Operation of a Tritium Extraction Facility at the...

237

Enhanced Geothermal in Nevada: Extracting Heat From the Earth...  

NLE Websites -- All DOE Office Websites (Extended Search)

Enhanced Geothermal in Nevada: Extracting Heat From the Earth to Generate Sustainable Power Enhanced Geothermal in Nevada: Extracting Heat From the Earth to Generate Sustainable...

238

2000 TMS Fall Extraction and Process Metallurgy Meeting  

Science Conference Proceedings (OSTI)

TMS Logo. 2000 TMS Fall Extraction and Process Metallurgy Meeting: New Technologies for the Next Millennium. 2000 TMS FALL EXTRACTION AND ...

239

2000 TMS Fall Extraction and Process Metallurgy Meeting: US Air  

Science Conference Proceedings (OSTI)

TMS Logo. 2000 TMS Fall Extraction and Process Metallurgy Meeting: U.S. Airways. 2000 TMS FALL EXTRACTION AND PROCESS METALLURGY MEETING: ...

240

Crystal-Assisted Beam Extraction and Collimation at the U-70 Circular Accelerator  

E-Print Network (OSTI)

New crystal technique - array of bent strips and a fan-type reflector, based on thin straight plates - have been used for research of extraction and collimation a circulating beam in the U-70 accelerator at the energy 50 GeV and 1.3 GeV. It is shown, that new devices can effectively steer a beam in a wide energy range. For protons with energy 50 GeV efficiency of extraction and collimation about 90 % has been achieved which is record for this method. Reduction of particle losses in 2-3 times was observed also in accelerator at application of different crystals in comparison with the usual one-stage collimation scheme of beam with a steel absorber.

Afonin, A G; Bellucci, S; Belov, S A; Bini, S; Gorlov, V N; Giannini, G; Ermolaev, A D; Ivanova, I V; Krylov, D M; Maisheev, V A; Savin, D A; Syshchikov, E A; Terekhov, V I; Chepegin, V N; Chesnokov, Yu A; Chirkov, P N; Yazynin, I A

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

STATUS OF SLOW EXTRACTION OF HIGH INTENSITY PROTONS FROM BROOKHAVEN'S AGS.  

SciTech Connect

The Brookhaven AGS third integer resonant extraction system allows the AGS to provide high quality, high intensity 25.5 GeV/c proton beams simultaneously to four target stations and as many as 8 experiments. With the increasing intensities (over 7 x 10{sup 13} protons/pulse) and associated longer spill periods (2.4 to 3 seconds long), we continue to run with low losses and high quality low modulation continuous current beams. We have an active program of high energy physics experiments, including the high precision measurement of the muons magnetic moment [1] and the discovery of the rare Kaon decay, K+ {yields} {pi} + {nu}{bar {nu}} [2]. This program is continuing into the future with the rare symmetry violating process experiments [3] currently being designed to operate at the AGS. In this paper, we will present results from operation of high intensity slow extraction, the problems we encounter, and our solutions to those problems.

BROWN,K.A.AHRENS,L.BRENNAN,J.M.GLENN,J.W.ROSER,T.RUSSO,T.TSOUPAS,N.SMITH,K.ZENO,K.

2003-05-12T23:59:59.000Z

242

Analyzing Losses: Transuranics into Waste and Fission Products into Recycled Fuel  

SciTech Connect

All mass streams from separations and fuel fabrication are products that must meet criteria. Those headed for disposal must meet waste acceptance criteria (WAC) for the eventual disposal sites corresponding to their waste classification. Those headed for reuse must meet fuel or target impurity limits. A “loss” is any material that ends up where it is undesired. The various types of losses are linked in the sense that as the loss of transuranic (TRU) material into waste is reduced, often the loss or carryover of waste into TRU or uranium is increased. We have analyzed four separation options and two fuel fabrication options in a generic fuel cycle. The separation options are aqueous uranium extraction plus (UREX+1), electrochemical, Atomics International reduction oxidation separation (AIROX), and melt refining. UREX+1 and electrochemical are traditional, full separation techniques. AIROX and melt refining are taken as examples of limited separations, also known as minimum fuel treatment. The fuels are oxide and metal. To define a generic fuel cycle, a fuel recycling loop is fed from used light water reactor (LWR) uranium oxide fuel (UOX) at 51 MWth-day/kg-iHM burnup. The recycling loop uses a fast reactor with TRU conversion ratio (CR) of 0.50. Excess recovered uranium is put into storage. Only waste, not used fuel, is disposed – unless the impurities accumulate to a level so that it is impossible to make new fuel for the fast reactor. Impurities accumulate as dictated by separation removal and fission product generation. Our model approximates adjustment to fast reactor fuel stream blending of TRU and U products from incoming LWR UOX and recycling FR fuel to compensate for impurity accumulation by adjusting TRU:U ratios. Our mass flow model ignores postulated fuel impurity limits; we compare the calculated impurity values with those limits to identify elements of concern. AIROX and melt refining cannot be used to separate used LWR UOX-51 because they cannot separate U from TRU, it is then impossible to make X% TRU for fast reactors with UOX-51 used fuel with 1.3% TRU. AIROX and melt refining can serve in the recycle loop for about 3 recycles, at which point the accumulated impurities displace fertile uranium and the fuel can no longer be as critical as the original fast reactor fuel recipe. UREX+1 and electrochemical can serve in either capacity; key impurities appear to be lanthanides and several transition metals.

Steven J. Piet; Nick R. Soelberg; Samuel E. Bays; Robert E. Cherry; Layne F. Pincock; Eric L. Shaber; Melissa C. Teague; Gregory M. Teske; Kurt G. Vedros; Candido Pereira; Denia Djokic

2010-11-01T23:59:59.000Z

243

Evaluation of extractant-coated ferromagnetic microparticles for the recovery of hazardous metals from waste solution.  

SciTech Connect

A magnetically assisted chemical separation (MACS) process was developed earlier at Argonne National Laboratory (ANL). This compact process was designed for the separation of transuranics (TRU) and radionuclides from the liquid waste streams that exist at many DOE sites, with an overall reduction in waste volume requiring disposal. The MACS process combines the selectivity afforded by solvent extractant/ion exchange materials with magnetic separation to provide an efficient chemical separation. Recently, the MACS process has been evaluated with acidic organophosphorus extractants for hazardous metal recovery from waste solutions. Moreover, process scale-up design issues have been addressed with respect to particle filtration and recovery. Two acidic organophosphorus compounds have been investigated for hazardous metal recovery, bis(2,4,4-trimethylpentyl) phosphinic acid (Cyanex{reg_sign} 272) and bis(2,4,4-trimethylpentyl) dithiophosphinic acid (Cyanex{reg_sign} 301). Coated onto magnetic microparticles, these extractants demonstrated superior recovery of hazardous metals from solution, relative to what was expected on the basis of results from solvent extraction experiments. The results illustrate the diverse applications of MACS technology for dilute waste streams. Preliminary process scale-up experiments with a high-gradient magnetic separator at Oak Ridge National Laboratory have revealed that very low microparticle loss rates are possible.

Kaminski, M. D.

1998-05-08T23:59:59.000Z

244

System Losses Study - FIT (Fuel-cycle Integration and Tradeoffs)  

SciTech Connect

This team aimed to understand the broad implications of changes of operating performance and parameters of a fuel cycle component on the entire system. In particular, this report documents the study of the impact of changing the loss of fission products into recycled fuel and the loss of actinides into waste. When the effort started in spring 2009, an over-simplified statement of the objective was “the number of nines” – how would the cost of separation, fuel fabrication, and waste management change as the number of nines of separation efficiency changed. The intent was to determine the optimum “losses” of TRU into waste for the single system that had been the focus of the Global Nuclear Energy Program (GNEP), namely sustained recycle in burner fast reactors, fed by transuranic (TRU) material recovered from used LWR UOX-51 fuel. That objective proved to be neither possible (insufficient details or attention to the former GNEP options, change in national waste management strategy from a Yucca Mountain focus) nor appropriate given the 2009-2010 change to a science-based program considering a wider range of options. Indeed, the definition of “losses” itself changed from the loss of TRU into waste to a generic definition that a “loss” is any material that ends up where it is undesired. All streams from either separation or fuel fabrication are products; fuel feed streams must lead to fuels with tolerable impurities and waste streams must meet waste acceptance criteria (WAC) for one or more disposal sites. And, these losses are linked in the sense that as the loss of TRU into waste is reduced, often the loss or carryover of waste into TRU or uranium is increased. The effort has provided a mechanism for connecting these three Campaigns at a technical level that had not previously occurred – asking smarter and smarter questions, sometimes answering them, discussing assumptions, identifying R&D needs, and gaining new insights. The FIT model has been a forcing function, helping the team in this endeavor. Models don’t like “TBD” as an input, forcing us to make assumptions and see if they matter. A major addition in FY 2010 was exploratory analysis of “modified open fuel” cycles, employing “minimum fuel treatment” as opposed to full aqueous or electrochemical separation treatment. This increased complexity in our analysis and analytical tool development because equilibrium conditions do not appear sustainable in minimum fuel treatment cases, as was assumed in FY 2009 work with conventional aqueous and electrochemical separation. It is no longer reasonable to assume an equilibrium situation exists in all cases.

Steven J. Piet; Nick R. Soelberg; Samuel E. Bays; Robert S. Cherry; Denia Djokic; Candido Pereira; Layne F. Pincock; Eric L. Shaber; Melissa C. Teague; Gregory M. Teske; Kurt G. Vedros

2010-09-01T23:59:59.000Z

245

Definition extraction for glossary creation : a study on extracting definitions for semi-automatic glossary creation in Dutch.  

E-Print Network (OSTI)

??The central topic of this thesis is the automatic extraction of definitions from text. Definition extraction can play a role in various applications including the… (more)

Westerhout, E.N.

2010-01-01T23:59:59.000Z

246

Protected Loss of Flow Transient Simulation (Quicktime format, High  

NLE Websites -- All DOE Office Websites (Extended Search)

Engineering Analysis > Videos Engineering Analysis > Videos Engineering Analysis: Protected Loss of Flow Transient Simulation Quicktime format Quicktime Format - High Bandwidth | Size: 25.94 MB | Bit Rate: 1148 kbps Keywords: flow transient, plot, EBR-II, SAS4A, SASSYS-1, passive safety, protected loss of flow, PLOF, shutdown heat removal test, SHRT-17, SHRT17 Elevation plot showing detailed top of core temperatures in experimental assembly XX09 during a protected loss of flow transient in EBR-II. Surrounding assemblies are depicted using fuel average temperatures. Results show excellent decay heat removal capability of sodium through natural circulation and exceptionally low transient temperatures with metallic fuel. :: Please wait until video loads completely :: Closed Captioning Transcript

247

$10 Billion Loan Loss Reserve for the Department's Loan Programs |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

$10 Billion Loan Loss Reserve for the Department's Loan Programs $10 Billion Loan Loss Reserve for the Department's Loan Programs $10 Billion Loan Loss Reserve for the Department's Loan Programs November 17, 2011 - 11:33am Addthis In any portfolio of investments, there will be some individual companies that will succeed and some that won't. That is especially true for a program like this that was established to support American leadership in the most cutting edge, innovative companies. No one ever expected a 100 percent success rate, but those that do succeed will generate thousands of new jobs in the short term and pave the way for entire new industries in the long term. China, Germany, Korea and others understand the stakes and so do we: advanced auto manufacturing and clean energy are already huge global industries. The economic opportunities will grow dramatically in the years

248

Classical strongly coupled quark-gluon plasma. VII. Energy loss  

Science Conference Proceedings (OSTI)

We use linear response analysis and the fluctuation-dissipation theorem to derive the energy loss of a heavy quark in the SU(2) classical Coulomb plasma in terms of the l=1 monopole and nonstatic structure factor. The result is valid for all Coulomb couplings {Gamma}=V/K, the ratio of the mean potential to kinetic energy. We use the Liouville equation in the collisionless limit to assess the SU(2) nonstatic structure factor. We find the energy loss to be strongly dependent on {Gamma}. In the liquid phase with {Gamma}{approx_equal}4, the energy loss is mostly metallic and soundless with neither a Cerenkov nor a Mach cone. Our analytical results compare favorably with the SU(2) molecular dynamics simulations at large momentum and for heavy quark masses.

Cho, Sungtae; Zahed, Ismail [Department of Physics and Astronomy, State University of New York, Stony Brook, New York 11794 (United States)

2010-12-15T23:59:59.000Z

249

Gas-rich sediment and coastal wetland loss in Louisiana  

SciTech Connect

High rates of wetland loss in southern Louisiana provide the impetus for examining the role that trapped, biogenic gases play in regulating subsidence of coastal areas. A significant cause for wetland loss in this region is relative sea-level rise produced by sediment-volume reduction. Dewatering, grain reorientation and packing, and oxidation of organic-rich sediments are thought to be the main processes for volume loss. It is argued that natural and anthropogenic causes for sediment degasification play a critical role in sediment-volume reduction. Compressional wave velocities were measured at 34 sites in both the abandoned (Holocene) and modern parts of the Mssissippi Delta. A low-frequency source (<200 Hz) was used to maximize sound-wave dispersion caused by interstitial gas bubbles. Compressional wave velocities measured at low frequencies relative to the gas-bubble resonant-frequency undergo maximum change from the velocity for a gas-free sediment.

Thompson, M.D.; McGinnis, L.D.; Wilkey, P.L.; Miller, S.F.

1993-03-01T23:59:59.000Z

250

H- AND PROTON BEAM LOSS COMPARISON AT SNS SUPERCONDUCTING LINAC  

Science Conference Proceedings (OSTI)

A comparison of beam loss in the superconducting part (SCL) of the Spallation Neutron Source (SNS) linac for H- and protons is presented. During the experiment the nominal beam of negative hydrogen ions in the SCL was replaced by a proton beam created by insertion of a thin stripping carbon foil placed in the low energy section of the linac. The observed significant reduction in the beam loss for protons is explained by a domination of the intra beam stripping mechanism of the beam loss for H-. The details of the experiment are discussed, and a preliminary estimation of the cross section of the reaction H- + H- -> H- + H0 + e is presented. Earlier, a short description of these studies was presented in [1].

Aleksandrov, Alexander V [ORNL; Galambos, John D [ORNL; Plum, Michael A [ORNL; Shishlo, Andrei P [ORNL

2012-01-01T23:59:59.000Z

251

Fluid loss to formation stopped prior to gravel packing  

Science Conference Proceedings (OSTI)

Union Texas Petroleum has combined special techniques in offshore Louisiana gravel-packing operations to combat severe fluid loss that had jeopardized previous gravel-packed completions. By using an annulus pressure-controlled circulation valve and a crosslinked polymer gelled block, Union Texas was able to totally halt loss of fluid to a formation that had an 1,835-psi overbalanced (the hydrostatic pressure of well fluid in the treating string-to-casing annulus exceeded formation pressure by 1,835 psi). The pressure-controlled valve permitted process control without pipe movement, and the gelled block prevented fluid loss to the formation while the gravel pack was being installed. The well was perforated underbalanced, using tubing-conveyed guns, for perforation cleanup.

Quarnstrom, T.F. (Union Texas Petroleum, Houston, TX (US)); Cavender, T.W.; Shelton, G. (Vann Systems Houston, TX (US))

1989-09-25T23:59:59.000Z

252

ANALYZING SURFACE ROUGHNESS DEPENDENCE OF LINEAR RF LOSSES  

SciTech Connect

Topographic structure on Superconductivity Radio Frequency (SRF) surfaces can contribute additional cavity RF losses describable in terms of surface RF reflectivity and absorption indices of wave scattering theory. At isotropic homogeneous extent, Power Spectrum Density (PSD) of roughness is introduced and quantifies the random surface topographic structure. PSD obtained from different surface treatments of niobium, such Buffered Chemical Polishing (BCP), Electropolishing (EP), Nano-Mechanical Polishing (NMP) and Barrel Centrifugal Polishing (CBP) are compared. A perturbation model is utilized to calculate the additional rough surface RF losses based on PSD statistical analysis. This model will not consider that superconductor becomes normal conducting at fields higher than transition field. One can calculate the RF power dissipation ratio between rough surface and ideal smooth surface within this field range from linear loss mechanisms.

Reece, Charles E. [JLAB; Kelley, Michael J. [JLAB, W& M College; Xu, Chen [JLAB, W& M College

2012-09-01T23:59:59.000Z

253

Transport AC loss in high temperature superconducting coils  

E-Print Network (OSTI)

, and the world’s population continues to grow, our existing methods for energy supply and usage are clearly unsustainable. In developed industrialised nations, such as the UK and the US, the industrial sector uses about one third of all energy consumed [2... superconducting coil is found to be significantly large, and this will reduce the efficiency of the device in which it is utilised, par- ticularly when the loss is reflected back to room temperature by including the refrigeration cost. Many existing AC loss...

Ainslie, Mark

2012-05-08T23:59:59.000Z

254

Loss of benefits resulting from mandated nuclear plant shutdowns  

SciTech Connect

This paper identifies and discusses some of the important consequences of nuclear power plant unavailability, and quantifies a number of technical measures of loss of benefits that result from regulatory actions such as licensing delays and mandated nuclear plant outages. The loss of benefits that accompany such regulatory actions include increased costs of systems generation, increased demand for nonnuclear and often scarce fuels, and reduced system reliability. This paper is based on a series of case studies, supplemented by sensitivity studies, on hypothetical nuclear plant shutdowns. These studies were developed by Argonne in cooperation with four electric utilities.

Peerenboom, J.P.; Buehring, W.A.

1982-01-01T23:59:59.000Z

255

Distilling single-photon entanglement from photon loss and decoherence  

E-Print Network (OSTI)

Single-photon entanglement may be the simplest type of entanglement but it is of vice importance in quantum communication. Here we present a practical protocol for distilling the single-photon entanglement from both photon loss and decoherence. With the help of some local single photons, the probability of single photon loss can be decreased and the less-entangled state can also be recovered to maximally entangled state simultaneously. It only requires some linear optical elements which makes it feasible in current experiment condition. This protocol might find applications in current quantum communications based on the quantum repeaters.

Yu-Bo Sheng; Lan Zhou

2013-06-07T23:59:59.000Z

256

Passive magnetic bearing element with minimal power losses  

DOE Patents (OSTI)

Systems employing passive magnetic bearing elements having minimal power losses are provided. Improved stabilizing elements are shown, employing periodic magnet arrays and inductively loaded circuits, but with improved characteristics compared to the elements disclosed in U.S. Patent No. 5,495,221 entitled "Dynamically Stable Magnetic Suspension/Bearing System." The improvements relate to increasing the magnitude of the force derivative, while at the same time reducing the power dissipated during the normal operation of the bearing system, to provide a passive bearing system that has virtually no losses under equilibrium conditions, that is, when the supported system is not subject to any accelerations except those of gravity.

Post, Richard F. (Walnut Creek, CA)

1998-01-01T23:59:59.000Z

257

Passive magnetic bearing element with minimal power losses  

DOE Patents (OSTI)

Systems employing passive magnetic bearing elements having minimal power losses are provided. Improved stabilizing elements are shown, employing periodic magnet arrays and inductively loaded circuits, but with improved characteristics compared to the elements disclosed in US Patent No. 5,495,221 entitled ``Dynamically Stable Magnetic Suspension/Bearing System.`` The improvements relate to increasing the magnitude of the force derivative, while at the same time reducing the power dissipated during the normal operation of the bearing system, to provide a passive bearing system that has virtually no losses under equilibrium conditions, that is, when the supported system is not subject to any accelerations except those of gravity. 8 figs.

Post, R.F.

1998-12-08T23:59:59.000Z

258

Implementation of Beam-Loss Monitor systems for the SSC  

Science Conference Proceedings (OSTI)

Beam-Loss Monitors (BLM) are used with each accelerator in the Superconducting Super Collider complex. The primary purpose of these detectors is to protect the accelerators from damage due to the loss of protons. Although the range of primary beam energies to be covered is very large, 20 MeV to 20 TeV, we plan to maintain commonality of detectors and electronics as much as possible. In this report the plans for developing and implementing BLM systems for each of the accelerators will be discussed. Possible solutions to problems that have been identified are presented.

Johnson, R.G.

1994-07-01T23:59:59.000Z

259

Beam Loss Monitors for NSLS-II Storage Ring  

Science Conference Proceedings (OSTI)

The shielding for the NSLS-II storage ring will provide adequate protection for the full injected beam losses in two cells of the ring around the injection point, but the remainder of the ring is shielded for lower losses of Cerenkov light as electrons transit ultra-pure fused silica rods placed close to the inner edge of the VC. The entire length of the rod will collect light from the electrons of the spread out shower resulting from the small glancing angle of the lost beam particles to the VC wall. The design and measurements results of the prototype Cerenkov BLM will be presented.

Kramer, S.L.; Cameron, P.

2011-03-28T23:59:59.000Z

260

Characterizing and Controlling Beam Losses at the LANSCE Facility  

SciTech Connect

The Los Alamos Neutron Science Center (LANSCE) currently provides 100-MeV H{sup +} and 800-MeV H{sup -} beams to several user facilities that have distinct beam requirements, e.g. intensity, micropulse pattern, duty factor, etc. Minimizing beam loss is critical to achieving good performance and reliable operation, but can be challenging in the context of simultaneous multi-beam delivery. This presentation will discuss various aspects related to the observation, characterization and minimization of beam loss associated with normal production beam operations in the linac.

Rybarcyk, Lawrence J. [Los Alamos National Laboratory

2012-09-12T23:59:59.000Z

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Predictions of convective losses from a solar cavity receiver  

SciTech Connect

Convective losses arising from buoyancy driven flow were calculated for a two-dimensional model simulating a solar cavity receiver. The TEMPEST code, capable of fully three-dimensional coupled thermal-hydraulic transient calculations, was used for the simulation. Predicted velocity and temperature results for a 2.59 m deep by 2.88 m high rectangular cavity with an aperture opening of 1.72 m were used to determine convective losses for prescribed interior wall temperatures and cavity orientation. Velocity vector and temperature isotherm plots were used to analyze flow characteristics.

Eyler, L.L.

1979-12-01T23:59:59.000Z

262

Energy Loss in Nuclear Drell-Yan Process  

E-Print Network (OSTI)

By means of the nuclear parton distributions which can be used to provide a good explanation for the EMC effect in the whole x range, we investigate the energy loss effect in nuclear Drell-Yan process. When the cross section of lepton pair production is considered varying with the center-of-mass energy of the nucleon-nucleon collision, we find that the nuclear Drell-Yan(DY) ratio is suppressed due to the energy loss, which balances the overestimate of the DY ratio only in consideration of the effect of nuclear parton distributions.

Jian-Jun Yang; Guang-Lie Li

1998-05-21T23:59:59.000Z

263

Energy-loss rate of a fast particle in graphene  

SciTech Connect

The energy-loss rate of a fast particle in graphene is studied. The energy-loss rate always increases with increasing incident particle energy, which is quite unusual when compared to electron gas in normal metal. Graphene exhibits a ''discriminating'' behavior where there exists a low energy cut-off below which the scattering process is strictly forbidden, leading to lossless traverse of an external particle in graphene. This low energy cutoff is of the order of nearest neighbor hopping bandwidth. Our results suggest that backscattering is also absent in the external particle scattering of graphene.

Ang, Yee Sin; Zhang, C. [School of Engineering Physics, University of Wollongong, 2522 NSW (Australia); Kee, Chun Yun [Department of Mathematics, National University of Singapore, 10 Kent Ridge Crescent, Singapore 119260 (Singapore)

2011-08-01T23:59:59.000Z

264

Energy Extraction for the LHC Superconducting Circuits  

E-Print Network (OSTI)

The superconducting magnets of the LHC will be powered in about 1700 electrical circuits. The energy stored in circuits, up to 1.3 GJ, can potentially cause severe damage of magnets, bus bars and current leads. In order to protect the superconducting elements after a resistive transition, the energy is dissipated into a dump resistor installed in series with the magnet chain that is switched into the circuit by opening current breakers. Experiments and simulation studies have been performed to identify the LHC circuits that need energy extraction. The required values of the extraction resistors have been computed. The outcome of the experimental results and the simulation studies are presented and the design of the different energy extraction systems that operate at 600 A and at 13 kA is described.

Dahlerup-Petersen, K; Schmidt, R; Sonnemann, F

2001-01-01T23:59:59.000Z

265

Ethanol extraction of phytosterols from corn fiber  

Science Conference Proceedings (OSTI)

The present invention provides a process for extracting sterols from a high solids, thermochemically hydrolyzed corn fiber using ethanol as the extractant. The process includes obtaining a corn fiber slurry having a moisture content from about 20 weight percent to about 50 weight percent solids (high solids content), thermochemically processing the corn fiber slurry having high solids content of 20 to 50% to produce a hydrolyzed corn fiber slurry, dewatering the hydrolyzed corn fiber slurry to achieve a residual corn fiber having a moisture content from about 30 to 80 weight percent solids, washing the residual corn fiber, dewatering the washed, hydrolyzed corn fiber slurry to achieve a residual corn fiber having a moisture content from about 30 to 80 weight percent solids, and extracting the residual corn fiber with ethanol and separating at least one sterol.

Abbas, Charles (Champaign, IL); Beery, Kyle E. (Decatur, IL); Binder, Thomas P. (Decatur, IL); Rammelsberg, Anne M. (Decatur, IL)

2010-11-16T23:59:59.000Z

266

Energetics of Marine Turbine Arrays - Extraction, Dissipation and Diminution  

E-Print Network (OSTI)

A two-scale modelling approach is discussed to predict the performance and energetics of a large number (more than a few hundred) of marine turbines installed as a power farm in a general coastal environment. The kernel of this approach is that the outer (coastal-scale) model/simulation is to assess the reduction of flow passing through a given farm area as a function of the increase of head loss across the farm, whereas the inner (device-scale) model/simulation uses this function to account for the (otherwise unknown) effect of coastal dynamics for that farm site. Large-eddy simulations (LES) of periodic open channel flow (with a porous plate model representing turbines) are then presented as the device-scale part of such a two-scale model of large marine turbine arrays. Results demonstrate how the energetics of turbine arrays (i.e. extraction, dissipation and diminution of energy in the entire farm area) may change depending on the characteristics of the farm site, array configuration and operating conditio...

Nishino, Takafumi

2013-01-01T23:59:59.000Z

267

review of extraction, processing, properties & applications of reactive ...  

Science Conference Proceedings (OSTI)

REVIEW OF EXTRACTION,. PROCESSING, PROPERTIES. & APPLICATIONS OF. REACTIVE METALS. Edited by. Brajendra Mishra ...

268

Using structured text for large-scale attribute extraction  

Science Conference Proceedings (OSTI)

We propose a weakly-supervised approach for extracting class attributes from structured text available within Web documents. The overall precision of the extracted attributes is around 30% higher than with previous methods operating on Web documents. ... Keywords: class attribute extraction, knowledge acquisition, structured text collections, weakly-supervised information extraction

Sujith Ravi; Marius Pa?ca

2008-10-01T23:59:59.000Z

269

Fractured Geothermal Growth Induced by Heat Extraction  

SciTech Connect

Field testing of a hydraulically stimulated, hot dry rock (HDR) geothermal system at the Fenton Hill site in northern New Mexico indicated that significant reservoir growth occurred as energy was extracted. Tracer, microseismic, and geochemical measurements provided the primary quantitative evidence for the increases in accessible reservoir volume and fractured rock surface area that were observed during energy extraction operations that caused substantial thermal drawdown in portions of the reservoir. These temporal increases suggest that augmentation of reservoir hear-production capacity in an HDR system may be possible. [DJE 2005

Tester, J.W.; Murphy, H.D.; Grigsby, C.O.; Potter, R.M.; Robinson, B.A.

1989-02-01T23:59:59.000Z

270

Catalog solvent extraction: anticipate process adjustments  

SciTech Connect

The Modular Caustic-Side Solvent Extraction Unit (MCU) utilizes commercially available centrifugal contactors to facilitate removal of radioactive cesium from highly alkaline salt solutions. During the fabrication of the contactor assembly, demonstrations revealed a higher propensity for foaming than was initially expected. A task team performed a series of single-phase experiments that revealed that the shape of the bottom vanes and the outer diameter of those vanes are key to the successful deployment of commercial contactors in the Caustic-Side Solvent Extraction Process. (authors)

Campbell, S.G.; Brass, E.A.; Brown, S.J.; Geeting, M.W. [Washington Savannah River Company, Savannah River Site, Aiken, SC (United States)

2008-07-01T23:59:59.000Z

271

Process for extracting technetium from alkaline solutions  

DOE Patents (OSTI)

A process for extracting technetium values from an aqueous alkaline solution containing at least one alkali metal hydroxide and at least one alkali metal nitrate, the at least one alkali metal nitrate having a concentration of from about 0.1 to 6 molar. The solution is contacted with a solvent consisting of a crown ether in a diluent for a period of time sufficient to selectively extract the technetium values from the aqueous alkaline solution. The solvent containing the technetium values is separated from the aqueous alkaline solution and the technetium values are stripped from the solvent.

Moyer, Bruce A. (Oak Ridge, TN); Sachleben, Richard A. (Knoxville, TN); Bonnesen, Peter V. (Knoxville, TN)

1995-01-01T23:59:59.000Z

272

Feedstock Loss from Drought is a Major Economic Risk for Biofuel...  

NLE Websites -- All DOE Office Websites (Extended Search)

Feedstock Loss from Drought is a Major Economic Risk for Biofuel Producers Title Feedstock Loss from Drought is a Major Economic Risk for Biofuel Producers Publication Type Report...

273

Practical Guide to Vegetable Oil ProcessingChapter 12 Loss Management  

Science Conference Proceedings (OSTI)

Practical Guide to Vegetable Oil Processing Chapter 12 Loss Management Processing eChapters Processing Press Downloadable pdf of Chapter 12 Loss Management from the book ...

274

Surrogate Data to Estimate Crop-Hail Loss  

Science Conference Proceedings (OSTI)

Crop-hail insurance loss data for 1948–94 are useful as measures of the historical variability of damaging hail in those 26 states where most crop damages occur. However, longer records are needed for various scientific and business applications, ...

David Changnon; Stanley A. Changnon

1997-09-01T23:59:59.000Z

275

Massive global ozone loss predicted following regional nuclear conflict  

E-Print Network (OSTI)

Massive global ozone loss predicted following regional nuclear conflict Michael J. Mills* , Owen B a chemistry-climate model and new estimates of smoke produced by fires in contemporary cities to calculate the impact on stratospheric ozone of a regional nuclear war between developing nuclear states involving 100

276

Acceleration and energy loss in N = 4 SYM  

Science Conference Proceedings (OSTI)

This contribution is based on two talks given at the XIII Mexican School of Particles and Fields. We revisit some of the results presented in [19], concerning the rate of energy loss of an accelerating quark in strongly-coupled N = 4 super-Yang-Mills.

Chernicoff, Mariano; Gueijosa, Alberto [Departamento de Fisica de Altas Energias, Instituto de Ciencias Nucleares Universidad Nacional Autonoma de Mexico (Mexico)

2009-04-20T23:59:59.000Z

277

Measurements of AC Losses and Current Distribution in Superconducting Cables  

Science Conference Proceedings (OSTI)

This paper presents our new experimental facility and techniques to measure ac loss and current distribution between the layers for High Temperature Superconducting (HTS) cables. The facility is powered with a 45 kVA three-phase power supply which can provide three-phase currents up to 5 kA per phase via high current transformers. The system is suitable for measurements at any frequency between 20 and 500 Hz to better understand the ac loss mechanisms in HTS cables. In this paper, we will report techniques and results for ac loss measurements carried out on several HTS cables with and without an HTS shielding layer. For cables without a shielding layer, care must be taken to control the effect of the magnetic fields from return currents on loss measurements. The waveform of the axial magnetic field was also measured by a small pick-up coil placed inside a two-layer cable. The temporal current distribution between the layers can be calculated from the waveform of the axial field.

Nguyen, Doan A [Los Alamos National Laboratory (LANL); Ashworth, Stephen P [Los Alamos National Laboratory (LANL); Duckworth, Robert C [ORNL; Carter, Bill [AMSC; Fleshler, Steven [AMER Superconductor Corp, Devens, MA 01434

2011-01-01T23:59:59.000Z

278

The Energy Harvesting Multiple Access Channel with Energy Storage Losses  

E-Print Network (OSTI)

The Energy Harvesting Multiple Access Channel with Energy Storage Losses Kaya Tutuncuoglu and Aylin considers a Gaussian multiple access channel with two energy harvesting transmitters with lossy energy storage. The power allocation policy maximizing the average weighted sum rate given the energy harvesting

Yener, Aylin

279

Galvanic battery. [tape wrapping to seal against moisture loss  

SciTech Connect

A galvanic battery comprises rigid battery components and a wrapping of insulating material. The wrapping consists of a length of thin, extensible plastic tape wound in successive laps under lengthwise stretch around the battery and having its outer end secured to a preceeding layer of tape. The tape in combination with the rigid battery components effectively seals the battery against loss of moisture.

Tamminen, P.J.

1962-04-24T23:59:59.000Z

280

Google's Loss: The Public's Gain APRIL 28, 2011  

E-Print Network (OSTI)

Google's Loss: The Public's Gain APRIL 28, 2011 Robert Darnton Musée du Louvre, Paris Jean a postmortem on Google's attempt to digitize and sell millions of books, despite the decision by Judge Denny Chin on March 23 to reject the agreement that seemed to make Google's project possible. Google Book

Hofri, Micha

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Unsteady Loss in a High Pressure Turbine Stage  

E-Print Network (OSTI)

The widespread use of the gas turbine as a means of aircraft propulsion has provided a considerable impetusUnsteady Loss in a High Pressure Turbine Stage Stephen John Payne Trinity College A thesis in a High Pressure Turbine Stage Stephen John Payne Trinity College A thesis submitted in partial fulfilment

Payne, Stephen J.

282

A utility framework for bounded-loss market makers  

E-Print Network (OSTI)

We introduce a class of utility-based market makers that always accept orders at their risk-neutral prices. We derive necessary and sufficient conditions for such market makers to have bounded loss. We prove that hyperbolic absolute risk aversion utility market makers are equivalent to weighted pseudospherical scoring rule market makers. In particular, Hanson’s logarithmic scoring rule market maker corresponds to a negative exponential utility market maker in our framework. We describe a third equivalent formulation based on maintaining a cost function that seems most natural for implementation purposes, and we illustrate how to translate among the three equivalent formulations. We examine the tradeoff between the market’s liquidity and the market maker’s worst-case loss. For a fixed bound on worst-case loss, some market makers exhibit greater liquidity near uniform prices and some exhibit greater liquidity near extreme prices, but no market maker can exhibit uniformly greater liquidity in all regimes. For a fixed minimum liquidity level, we give the lower bound of market maker’s worst-case loss under some regularity conditions. 1

Yiling Chen

2007-01-01T23:59:59.000Z

283

Theoretical mass loss rates of cool main-sequence stars  

E-Print Network (OSTI)

We develop a model for the wind properties of cool main-sequence stars, which comprises their wind ram pressures, mass fluxes, and terminal wind velocities. The wind properties are determined through a polytropic magnetised wind model, assuming power laws for the dependence of the thermal and magnetic wind parameters on the stellar rotation rate. We use empirical data to constrain theoretical wind scenarios, which are characterised by different rates of increase of the wind temperature, wind density, and magnetic field strength. Scenarios based on moderate rates of increase yield wind ram pressures in agreement with most empirical constraints, but cannot account for some moderately rotating targets, whose high apparent mass loss rates are inconsistent with observed coronal X-ray and magnetic properties. For fast magnetic rotators, the magneto-centrifugal driving of the outflow can produce terminal wind velocities far in excess of the surface escape velocity. Disregarding this aspect in the analyses of wind ram pressures leads to overestimations of stellar mass loss rates. The predicted mass loss rates of cool main-sequence stars do not exceed about ten times the solar value. Our results are in contrast with previous investigations, which found a strong increase of the stellar mass loss rates with the coronal X-ray flux. Owing to the weaker dependence, we expect the impact of stellar winds on planetary atmospheres to be less severe and the detectability of magnetospheric radio emission to be lower then previously suggested. Considering the rotational evolution of a one solar-mass star, the mass loss rates and the wind ram pressures are highest during the pre-main sequence phase.

V. Holzwarth; M. Jardine

2006-11-14T23:59:59.000Z

284

Topic relatedness in evaluative information extraction  

Science Conference Proceedings (OSTI)

The task of extracting opinions/evaluations related to a given topic from a large number of documents such as Web documents is crucial for developing an automatic evaluation finding system, which can handle a wide variety of topics as input. In this ...

Takuya Kawada; Tetsuji Nakagawa; Kentaro Inui; Sadao Kurohashi

2009-12-01T23:59:59.000Z

285

Extracting chatbot knowledge from online discussion forums  

Science Conference Proceedings (OSTI)

This paper presents a novel approach for extracting high-quality ?thread-title, reply? pairs as chat knowledge from online discussion forums so as to efficiently support the construction of a chatbot for a certain domain. Given a forum, the ...

Jizhou Huang; Ming Zhou; Dan Yang

2007-01-01T23:59:59.000Z

286

Selective solvent extraction of cellulosic material  

DOE Patents (OSTI)

Cellulosic products having a high hemicellulose to lignin weight ratio are obtained by extracting a cellulosic composition with basic ethanol-water solution having a pH between about 12 and about 14 at a temperature between about 15.degree. and about 70.degree. C. and for a time period between about 2 and about 80 hours.

Wang, Daniel I. C. (Belmont, MA); Avgerinos, George C. (Newton Center, MA)

1983-01-01T23:59:59.000Z

287

Selective solvent extraction of cellulosic material  

DOE Patents (OSTI)

Cellulosic products having a high hemicellulose to lignin weight ratio are obtained by extracting a cellulosic composition with basic ethanol-water solution having a pH between about 12 and about 14 at a temperature between about 15 and about 70 C and for a time period between about 2 and about 80 hours. 6 figs.

Wang, D.I.C.; Avgerinos, G.C.

1983-07-26T23:59:59.000Z

288

Slavonic information extraction and partial parsing  

Science Conference Proceedings (OSTI)

Information Extraction (IE) often involves some amount of partial syntactic processing. This is clear in cases of interesting high-level IE tasks, such as finding information about who did what to whom (when, where, how and why), but it is also true ...

Adam Przepiórkowski

2007-06-01T23:59:59.000Z

289

Solvent Extraction, Electrowinning and Related Technologies  

Science Conference Proceedings (OSTI)

... Xstrata Process Support; Gordon Cooper, SNC Lavalin; Nosrat Behnood, PTMC Inc ... Crud and Organic Recovery Economics in Mineral Processing: Derek Ettie1; ... large aqueous-to-oil phase ratio extraction and enrichment of rare-earth ions ... which relates optimal operational condition to enhance anode lifecycles.

290

Classifiers for the Causes of Data Loss Using Packet-Loss Signatures* Phillip M. Dickens1, 2  

E-Print Network (OSTI)

transmission window. We are exploring the application of complexity theory to the problem of learning be mapped to the underlying causes of packet loss, and provide experimental results demonstrating the effectiveness of our approach. 1 Introduction Computational Grids create large-scale distributed systems

Dickens, Phillip M.

291

The Packet Loss Effect on MPEG Video Transmission in Wireless Networks  

Science Conference Proceedings (OSTI)

The purpose of this paper is to study the packet loss effect on MPEG video transmission quality in wireless networks. First, we consider the distribution of packet losses in wireless network, including distributed and burst packet losses. Besides, we ... Keywords: MPEG, wireless network, packet loss.

Cheng-Han Lin; Chih-Heng Ke; Ce-Kuen Shieh; Naveen K. Chilamkurti

2006-04-01T23:59:59.000Z

292

STATE of COLORADO LOSS NOTICE THIS FORM IS USED TO REPORT  

E-Print Network (OSTI)

STATE of COLORADO LOSS NOTICE THIS FORM IS USED TO REPORT PROPERTY, BOILER & MACHINERY, BOND, CRIME the appropriate insurance carrier(s). Agencies should take steps to mitigate the loss, maintain records to support coordination of coverages. Loss date Time Estimated Loss: State Dept: Colorado School of Mines (GLA) State Div

293

A Laboratory Study of Pressure Losses in Residential Air Distribution  

NLE Websites -- All DOE Office Websites (Extended Search)

A Laboratory Study of Pressure Losses in Residential Air Distribution A Laboratory Study of Pressure Losses in Residential Air Distribution Systems Speaker(s): Bass Abushakra Date: March 7, 2002 - 12:00pm Location: Bldg. 90 Seminar Host/Point of Contact: Duo Wang An experimental study was conducted to evaluate the pressure drop of residential air distribution system components that are either not available or poorly described in existing duct design literature. The tests were designed to imitate cases normally found in typical residential and light commercial installations. The study included three different sizes of flexible ducts, under different compression configurations, splitter boxes, supply boots, and a fresh air intake hood. The experimental tests apparatus followed ASHRAE Standard 120P - Methods of Testing to Determine Flow

294

Bootstrapping Timed Efficient Stream Loss-Tolerant Authentication (TESLA)  

E-Print Network (OSTI)

This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards " (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited. Copyright Notice Copyright (C) The Internet Society (2006). TESLA, the Timed Efficient Stream Loss-tolerant Authentication protocol, provides source authentication in multicast scenarios. TESLA is an efficient protocol with low communication and computation overhead that scales to large numbers of receivers and also tolerates packet loss. TESLA is based on loose time synchronization between the sender and the receivers. Source authentication is realized in TESLA by using Message Authentication Code (MAC) chaining. The use

Request Comments; H. Tschofenig; Status Of This Memo

2006-01-01T23:59:59.000Z

295

TIME DEPENDENCE OF SPACE CHARGE BEAM LOSSES IN THE COSMOTRON  

SciTech Connect

An investigation was made of Cosmotron intensity versus time through the entire time interval from the beginning of injection to the completion of r-f capture. The induction electrode signal was used for the instartaneous measurement of beam intensity. Oscilloscope displays of the signal were photographed and traced. Base lines were filled in on the tracings and the area of the pulses measured with a polar pianimeter. It was found that the relation losses of beam intensity increase with injection intensity (total injected charge), and that most of the losses take place in the time interval between the end of injection and the completion of the first synchrotron oscillation. (M.C.G.)

Barton, M.Q.; Sacharidis, E.J.

1962-01-01T23:59:59.000Z

296

Acceleration and Energy Loss in N=4 SYM  

E-Print Network (OSTI)

We give a brief overview of the results obtained in arXiv:0803.3070, concerning the rate of energy loss of an accelerating quark in strongly-coupled N=4 super-Yang-Mills, both at zero and finite temperature. For phenomenological purposes, our main result is that, when a quark is created within the plasma together with its corresponding antiquark, the quark starts feeling the plasma only after the q-\\bar{q} separation becomes larger than the (v-dependent) screening length, and from this point on the motion is correctly described by the analytic energy loss formula previously derived by Herzog et al. and Gubser within the stationary or late-time approximations. The present text is a slightly expanded version of two talks given at the XIII Mexican School of Particles and Fields in October 2008.

Mariano Chernicoff; Alberto Guijosa

2009-03-02T23:59:59.000Z

297

LOFT advanced densitometer for nuclear loss-of-coolant experiments  

SciTech Connect

A ''nuclear hardened'' gamma densitometer, a device which uses radiation attenuation to measure fluid density in the presence of a background radiation field, is described. Data from the nuclear hardened gamma densitometer are acquired by time sampling the coolant fluid piping and fluid attenuated source energy spectrum. The data are used to calculate transient coolant fluid cross sectional average density to analyze transient mass flow and other thermal-hydraulic characteristics during the Loss-of-Fluid Test (LOFT) loss-of-coolant experiments. The nuclear hardened gamma densitometer uses a pulse height analysis or energy discrimination, pulse counting technique which makes separation of the gamma radiation source signal from the reactor generated gamma radiation background noise signal possible by processing discrete pulses which retain their pulse amplitude information.

Johnson, L.O.; Lassahn, G.D.; Wood, D.B.

1979-01-01T23:59:59.000Z

298

Zero-switching-loss inverters for high-power applications  

SciTech Connect

The development of zero-switching-loss inverters has attracted much interest for industrial applications. The resonant dc link inverter (RDCLI) provides a simple and robust approach for realizing switching frequencies >20 kHz in multi-kilowatt systems but impresses substantial voltage stress (-- 2.5 supply voltage) across the devices. Two alternate topologies for realizing zero switching losses in high-power converters are proposed. The actively clamped resonant dc-link inverter (ACRLI) uses the concept of a lossless active clamp to restrict voltage stresses to only 1.3-1.5 supply voltage (V/sub s/) while maintaining a mode of operation similar to the RDCLI. For applications demanding substantially superior spectral performance, the resonant pole inverter (RPI), also called the quasi-resonant current mode inverter (QRCMI), is proposed as a viable topology. Detailed analysis, simulation, and experimental results are presented to verify operation principles of both power converters.

Divan, D.M.; Skibinski, G. (Wisconsin Univ., Madison, WI (USA). Dept. of Electrical and Computer Engineering)

1989-07-01T23:59:59.000Z

299

Energy-Efficiency Options for Insurance Loss Prevention  

SciTech Connect

Energy-efficiency improvements offer the insurance industry two areas of opportunity: reducing ordinary claims and avoiding greenhouse gas emissions that could precipitate natural disaster losses resulting from global climate change. We present three vehicles for taking advantage of this opportunity, including research and development, in- house energy management, and provision of key information to insurance customers and risk managers. The complementary role for renewable energy systems is also introduced.

Mills, E. [Ernest Orlando Lawrence Berkeley National Lab., CA (United States). Environmental Energy Technologies Div.; Knoepfel, I. [Swiss Reinsurance Co., Zurich (Switzerland)

1997-06-09T23:59:59.000Z

300

Mitigating Flood Loss through Local Comprehensive Planning in Florida  

E-Print Network (OSTI)

Planning researchers believe that property losses from natural hazards, such as floods can be reduced if governments address this issue and adopt appropriate policies in their plans. However, little empirical research has examined the relationship between plan quality and actual property loss from floods. My research addresses this critical gap in the planning and hazard research literature by evaluating the effectiveness of current plans and policies in mitigating property damage from floods. Specifically, this study: 1) assesses the extent to which local comprehensive plans integrate flood mitigation policies in Florida; and 2) it examines the impact of the quality of flood mitigation policies on actual insured flood damages. Study results show that fifty-three local plans in the sample received a mean score for total flood mitigation policy quality of 38.55, which represents 35.69% of the total possible points. These findings indicate that there is still considerable room for improvement by local governments on flooding issues. The scores of local plans varied widely, with coastal communities receiving significantly higher scores than non-coastal communities. While most communities adopted land use management tools, such as permitted land use and wetland permits as primary flood mitigation tools, incentive based tools/taxing tools and acquisition tools were rarely adopted. This study also finds that plan quality associated with flood mitigation policy had little discernible effect on reducing insured flood damage while controlling for biophysical, built environment and socio-economic variables. This result counters the assumption inherent in previous plan quality research that better plans mitigate the adverse effects associated with floods and other natural hazards. There are some possible explanations for this result in terms of plan implementation, land use management paradox and characteristics of insurance policies. The statistical analysis also suggests that insured flood loss is considerably affected by wetland alteration and a community's location on the coast. Another finding indicates that very strong leadership and dam construction are factors in mitigating flood loss.

Kang, Jung Eun

2009-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Low-loss binder for hot pressing boron nitride  

DOE Patents (OSTI)

This report describes an invention utilizing Borazine derivatives as low-loss binders and precursors for making ceramic boron nitirde structures. The derivative forms the same composition as the boron nitride starting material, thereby filling the voids with the same boron nitride material upon forming and hot pressing. The derivatives have a further advantage of being low in carbon thus resulting in less volatile byproduct that can result in bubble formation during pressing.

Maya, L.

1989-06-02T23:59:59.000Z

302

Optimization of the Low Loss SRF Cavity for the ILC  

SciTech Connect

The Low-Loss shape cavity design has been proposed as a possible alternative to the baseline TESLA cavity design for the ILC main linacs. The advantages of this design over the TESLA cavity are its lower cryogenic loss, and higher achievable gradient due to lower surface fields. High gradient prototypes for such designs have been tested at KEK (ICHIRO) and TJNAF (LL). However, issues related to HOM damping and multipacting still need to be addressed. Preliminary numerical studies of the prototype cavities have shown unacceptable damping factors for some higher-order dipole modes if the typical TESLA HOM couplers are directly adapted to the design. The resulting wakefield will dilute the beam emittance thus reducing the machine luminosity. Furthermore, high gradient tests on a 9-cell prototype at KEK have experienced multipacting barriers although a single LL cell had achieved a high gradient. From simulations, multipacting activities are found to occur in the end-groups of the cavity. In this paper, we will present the optimization results of the end-groups for the Low-Loss designs for effective HOM damping and alleviation of multipacting.

Sekutowicz, J.S.; /DESY; Kneisel, P.; /Jefferson Lab; Higo, T.; Morozumi, Y.; Saito, K.; /KEK, Tsukuba; Ge, L.; Ko, Yong-kyu; Lee, L.; Li, Z.; Ng, C.K.; Schussman, G.L.; Xiao, L.; /SLAC

2008-01-18T23:59:59.000Z

303

The LCLS Undulator Beam Loss Monitor Readout System  

SciTech Connect

The LCLS Undulator Beam Loss Monitor System is required to detect any loss radiation seen by the FEL undulators. The undulator segments consist of permanent magnets which are very sensitive to radiation damage. The operational goal is to keep demagnetization below 0.01% over the life of the LCLS. The BLM system is designed to help achieve this goal by detecting any loss radiation and indicating a fault condition if the radiation level exceeds a certain threshold. Upon reception of this fault signal, the LCLS Machine Protection System takes appropriate action by either halting or rate limiting the beam. The BLM detector consists of a PMT coupled to a Cherenkov radiator located near the upstream end of each undulator segment. There are 33 BLMs in the system, one per segment. The detectors are read out by a dedicated system that is integrated directly into the LCLS MPS. The BLM readout system provides monitoring of radiation levels, computation of integrated doses, detection of radiation excursions beyond set thresholds, fault reporting and control of BLM system functions. This paper describes the design, construction and operational performance of the BLM readout system.

Dusatko, John; Browne, M.; Fisher, A.S.; Kotturi, D.; Norum, S.; Olsen, J.; /SLAC

2012-07-23T23:59:59.000Z

304

Air extraction and LBTU coal gas combustion in gas turbines for IGCC systems  

SciTech Connect

The primary objective of the cold flow experiments is to study the effects of air extraction from two sites in a heavy-frame gas turbine: (1) the engine wrapper or manholes and (2) the compressor/combustor prediffuser inlet. The experiments involve a scale model of components of a state-of-the-art, US made gas turbine between the compressor exit and the turbine inlet Specifically, the purpose is to observe and measure how air extraction affects the flow distribution around the combustor cans and the impingement cooling flow rates on transition pieces of the combustor. The experimental data should provide turbine manufacturers the information needed to determine their preferred air extraction site. The secondary objectives for the experiments are as follows: (1) to identify regions with high-pressure losses, (2) to develop a dam base which will validate computational fluid dynamic calculations, and (3) to establish an experimental facility which may be used to assist the US industry in improving the aerodynamic design of nonrotating components of a heavy-frame gas turbine.

Yang, Tah-teh; Agrawal, A.K.; Kapat, J.S.

1992-01-01T23:59:59.000Z

305

Extracting metals directly from metal oxides  

DOE Patents (OSTI)

A method of extracting metals directly from metal oxides by exposing the oxide to a supercritical fluid solvent containing a chelating agent is described. Preferably, the metal is an actinide or a lanthanide. More preferably, the metal is uranium, thorium or plutonium. The chelating agent forms chelates that are soluble in the supercritical fluid, thereby allowing direct removal of the metal from the metal oxide. In preferred embodiments, the extraction solvent is supercritical carbon dioxide and the chelating agent is selected from the group consisting of .beta.-diketones, halogenated .beta.-diketones, phosphinic acids, halogenated phosphinic acids, carboxylic acids, halogenated carboxylic acids, and mixtures thereof. In especially preferred embodiments, at least one of the chelating agents is fluorinated. The method provides an environmentally benign process for removing metals from metal oxides without using acids or biologically harmful solvents. The chelate and supercritical fluid can be regenerated, and the metal recovered, to provide an economic, efficient process.

Wai, Chien M. (Moscow, ID); Smart, Neil G. (Moscow, ID); Phelps, Cindy (Moscow, ID)

1997-01-01T23:59:59.000Z

306

Extracting metals directly from metal oxides  

DOE Patents (OSTI)

A method of extracting metals directly from metal oxides by exposing the oxide to a supercritical fluid solvent containing a chelating agent is described. Preferably, the metal is an actinide or a lanthanide. More preferably, the metal is uranium, thorium or plutonium. The chelating agent forms chelates that are soluble in the supercritical fluid, thereby allowing direct removal of the metal from the metal oxide. In preferred embodiments, the extraction solvent is supercritical carbon dioxide and the chelating agent is selected from the group consisting of {beta}-diketones, halogenated {beta}-diketones, phosphinic acids, halogenated phosphinic acids, carboxylic acids, halogenated carboxylic acids, and mixtures thereof. In especially preferred embodiments, at least one of the chelating agents is fluorinated. The method provides an environmentally benign process for removing metals from metal oxides without using acids or biologically harmful solvents. The chelate and supercritical fluid can be regenerated, and the metal recovered, to provide an economic, efficient process. 4 figs.

Wai, C.M.; Smart, N.G.; Phelps, C.

1997-02-25T23:59:59.000Z

307

Energy extraction from crustal magma bodies  

DOE Green Energy (OSTI)

An open heat exchanger system for extracting thermal energy directly from shallow crustal magma bodies is described. The concept relies on natural properties of magma to create a permeable, solidified region surrounding a borehole drilled into the magma chamber. The region is fractured, possessing large surface area, and is sealed from the overburden. Energy is extracted by circulating a fluid through the system. Thermal stress analysis shows that such a fractured region can be developed at depths up to 10 km. An open heat exchanger experiment conducted in the partial melt zone of Kilauea Iki lava lake demonstrated the validity of this concept. Effective heat transfer surface area an order of magnitude greater than the borehole area was established during a two-day test period. The open heat exchanger concept greatly extends the number of magma systems that can be economically developed to produce energy.

Dunn, J.C.

1982-01-01T23:59:59.000Z

308

Extraction of Freshwater and Energy from Atmosphere  

E-Print Network (OSTI)

Author offers and researches a new, cheap method for the extraction of freshwater from the Earth atmosphere. The suggected method is fundamentally dictinct from all existing methods that extract freshwater from air. All other industrial methods extract water from a saline water source (in most cases from seawater). This new method may be used at any point in the Earth except Polar Zones. It does not require long-distance freshwater transportation. If seawater is not utilized for increasing its productivity, this inexpensive new method is very environment-friendly. The author method has two working versions: (1) the first variant the warm (hot) atmospheric air is lifted by the inflatable tube in a high altitude and atmospheric steam is condenced into freswater: (2) in the second version, the warm air is pumped 20-30 meters under the sea-surface. In the first version, wind and solar heating of air are used for causing air flow. In version (2) wind and propeller are used for causing air movment. The first method does not need energy, the second needs a small amount. Moreover, in variant (1) the freshwater has a high pressure (>30 or more atm.) and can be used for production of energy such as electricity and in that way the freshwater cost is lower. For increasing the productivity the seawater is injected into air and solar air heater may be used. The solar air heater produces a huge amount of electricity as a very powerful electricity generation plant. The offered electricity installation in 100 - 200 times cheaper than any common electric plant of equivalent output. Key words: Extraction freshwater, method of getting freshwater, receiving energy from atmosphere, powerful renewal electric plant.

Alexander Bolonkin

2007-04-19T23:59:59.000Z

309

STRIPPING OF URANIUM FROM ORGANIC EXTRACTANTS  

DOE Patents (OSTI)

A liquid-liquid extraction method is given for recovering uranium values from uranium-containing solutions. Uranium is removed from a uranium-containing organic solution by contacting said organic solution with an aqueous ammonium carbonate solution substantially saturated in uranium values. A uranium- containing precipitate is thereby formed which is separated from the organic and aqueous phases. Uranium values are recovered from this separated precipitate. (AE C)

Crouse, D.J. Jr.

1962-09-01T23:59:59.000Z

310

Extracting TMDs from CLAS12 data  

Science Conference Proceedings (OSTI)

We present studies of double longitudinal spin asymmetries in semi-inclusive deep inelastic scattering using a new dedicated Monte Carlo generator, which includes quark intrinsic transverse momentum within the generalized parton model based on the fully differential cross section for the process. Additionally we employ Bessel-weighting to the MC events to extract transverse momentum dependent parton distribution functions and also discuss possible uncertainties due to kinematic correlation effects.

Aghasyan, Mher M. [INFN-Frascati; Avakian, Harut A. [JLAB

2014-01-01T23:59:59.000Z

311

Recent progress in magma energy extraction  

DOE Green Energy (OSTI)

Ongoing research in the area of Magma Energy Extraction is directed at developing a fundamental understanding of the establishment and long term operation of an open, direct-contact heat exchanger in a crustal magma body. The energy extraction rate has a direct influence on the economic viability of the concept. An open heat exchanger, in which fluid is circulated through the interconnecting fissures and fractures in the solidified region around drilling tubing, offers the promise of very high rates of heat transfer. This paper discusses recent research in five areas: (1) fundamental mechanisms of solidifying and thermally fracturing magma; (2) convective heat transfer in the internally fractured solidified magma; (3) convective flow in the molten magma and heat transfer from the magma to the cooled heat exchanger protruding into it; (4) numerical simulation of the overall energy extraction process; and (5) the thermodynamics of energy conversion in a magma power plant at the surface. The studies show that an open heat exchanger can be formed by solidifying magma around a cooled borehole and that the resulting mass will be extensively fractured by thermally-induced stresses. Numerical models indicate that high quality thermal energy can be delivered at the wellhead at nominal rates from 25 to 30 MW electric. It is shown that optimum well circulation rates can be found that depend on the heat transfer characteristics of the magma heat exchanger and the thermodynamic power conversion efficiencies of the surface plant.

Ortega, A.; Dunn, J.C.; Chu, T.Y.; Wemple, R.P.; Hickox, C.E.

1987-01-01T23:59:59.000Z

312

Extraction of Freshwater and Energy from Atmosphere  

E-Print Network (OSTI)

Author offers and researches a new, cheap method for the extraction of freshwater from the Earth atmosphere. The suggected method is fundamentally dictinct from all existing methods that extract freshwater from air. All other industrial methods extract water from a saline water source (in most cases from seawater). This new method may be used at any point in the Earth except Polar Zones. It does not require long-distance freshwater transportation. If seawater is not utilized for increasing its productivity, this inexpensive new method is very environment-friendly. The author method has two working versions: (1) the first variant the warm (hot) atmospheric air is lifted by the inflatable tube in a high altitude and atmospheric steam is condenced into freswater: (2) in the second version, the warm air is pumped 20-30 meters under the sea-surface. In the first version, wind and solar heating of air are used for causing air flow. In version (2) wind and propeller are used for causing air movment. The first method...

Bolonkin, Alexander

2007-01-01T23:59:59.000Z

313

Analysis of Contaminant Rebound in Ground Water in Extraction...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of Contaminant Rebound in Ground Water in Extraction Wells at the Tuba City, Arizona, Site Analysis of Contaminant Rebound in Ground Water in Extraction Wells at the Tuba City,...

314

Multi-document summarisation using generic relation extraction  

Science Conference Proceedings (OSTI)

Experiments are reported that investigate the effect of various source document representations on the accuracy of the sentence extraction phase of a multi-document summarisation task. A novel representation is introduced based on generic relation extraction ...

Ben Hachey

2009-08-01T23:59:59.000Z

315

Extraction of nanosized cobalt sulfide from spent hydrocracking catalyst  

Science Conference Proceedings (OSTI)

The processes used for the extraction of metals (Co, Mo, and Al) from spent hydrotreating catalysts were investigated in this study. A detailed mechanism of the metal extraction process is described. Additionally, a simulation study was performed to ...

Samia A. Kosa, Eman Z. Hegazy

2013-01-01T23:59:59.000Z

316

Relevant learning objects extraction based on semantic annotation  

Science Conference Proceedings (OSTI)

We propose, in this paper, a model that extracts automatically learning objects as response to a user request. To do this, we proceed by automatically annotating texts with semantic metadata. These metadata will allow us to index and extract learning ...

Boutheina Smine; Rim Faiz; Jean-Pierre Desclés

2013-05-01T23:59:59.000Z

317

Minimally supervised domain-adaptive parse reranking for relation extraction  

Science Conference Proceedings (OSTI)

The paper demonstrates how the generic parser of a minimally supervised information extraction framework can be adapted to a given task and domain for relation extraction (RE). For the experiments a generic deep-linguistic parser was employed that works ...

Feiyu Xu; Hong Li; Yi Zhang; Hans Uszkoreit; Sebastian Krause

2011-10-01T23:59:59.000Z

318

Dynamic Hierarchical Markov Random Fields for Integrated Web Data Extraction  

Science Conference Proceedings (OSTI)

Existing template-independent web data extraction approaches adopt highly ineffective decoupled strategies---attempting to do data record detection and attribute labeling in two separate phases. In this paper, we propose an integrated web data extraction ...

Jun Zhu; Zaiqing Nie; Bo Zhang; Ji-Rong Wen

2008-06-01T23:59:59.000Z

319

California Natural Gas Total Liquids Extracted - State of Origin...  

U.S. Energy Information Administration (EIA) Indexed Site

Liquids Extracted - State of Origin (Thousand Barrels) California Natural Gas Total Liquids Extracted - State of Origin (Thousand Barrels) Decade Year-0 Year-1 Year-2 Year-3 Year-4...

320

New Mexico Natural Gas Total Liquids Extracted - State of Origin...  

U.S. Energy Information Administration (EIA) Indexed Site

Liquids Extracted - State of Origin (Thousand Barrels) New Mexico Natural Gas Total Liquids Extracted - State of Origin (Thousand Barrels) Decade Year-0 Year-1 Year-2 Year-3 Year-4...

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Proceedings of ISEC 2008, International Solvent Extraction Conference - Solvent Extraction: Fundamentals to Industrial Applications  

Science Conference Proceedings (OSTI)

The North American industry has employed major solvent-extraction processes to support a wide range of separations including but not limited to chemical, metallurgical, nuclear, biochemical, pharmaceutical, and petroleum applications. The knowledge enabling these separations has been obtained through fundamental studies in academe, government and industry. The International Solvent Extraction Conferences have been and continue to be a major gathering of scientists, engineers, operators, and vendors from around the world, who present new findings since the last meeting, exchange ideas, make business contacts, and conduct collegial discussions. The ISEC 2008 program emphasizes fundamentals to industrial applications of solvent extraction, particularly how this broad spectrum of activities is interconnected and has led to the implementation of novel processes. The oral and poster sessions have been organized into seven topics: Fundamentals; Novel Reagents, Materials and Techniques; Nuclear Fuel Reprocessing; Hydrometallurgy and Metals Extraction; Analytical and Preparative Applications; Biotechnology, Pharmaceuticals, Life-Science Products, and Organic Products; and Process Chemistry and Engineering. Over 350 abstracts were received, resulting in more than 260 manuscripts published in these proceedings. Five outstanding plenary presentations have been identified, with five parallel sessions for oral presentations and posters. In recognition of the major role solvent extraction (SX) plays in the hydrometallurgical and nuclear industries, these proceedings begin with sections focusing on hydrometallurgy, process chemistry, and engineering. More fundamental topics follow, including sections on novel reagents, materials, and techniques, featuring novel applications in analytical and biotechnology areas. Despite the diversity of topics and ideas represented, however, the primary focus of the ISEC community continues to be metals extraction. Four papers from these proceedings have been entered already in INIS in the form of individual reports. Among the remaining papers, 60 have been selected from the following sessions: Plenary Lectures, Hydrometallurgy and Metals Extraction, Nuclear Fuel Reprocessing, Analytical and Preparative Applications, Fundamentals, and Novel Reagents, Materials, and Techniques.

Moyer, Bruce A. (ed.)

2008-07-01T23:59:59.000Z

322

CONVERSION EXTRACTION DESULFURIZATION (CED) PHASE III  

DOE Green Energy (OSTI)

This project was undertaken to refine the Conversion Extraction Desulfurization (CED) technology to efficiently and economically remove sulfur from diesel fuel to levels below 15-ppm. CED is considered a generic term covering all desulfurization processes that involve oxidation and extraction. The CED process first extracts a fraction of the sulfur from the diesel, then selectively oxidizes the remaining sulfur compounds, and finally extracts these oxidized materials. The Department of Energy (DOE) awarded Petro Star Inc. a contract to fund Phase III of the CED process development. Phase III consisted of testing a continuous-flow process, optimization of the process steps, design of a pilot plant, and completion of a market study for licensing the process. Petro Star and the Degussa Corporation in coordination with Koch Modular Process Systems (KMPS) tested six key process steps in a 7.6-centimeter (cm) (3.0-inch) inside diameter (ID) column at gas oil feed rates of 7.8 to 93.3 liters per hour (l/h) (2.1 to 24.6 gallons per hour). The team verified the technical feasibility with respect to hydraulics for each unit operation tested and successfully demonstrated pre-extraction and solvent recovery distillation. Test operations conducted at KMPS demonstrated that the oxidation reaction converted a maximum of 97% of the thiophenes. The CED Process Development Team demonstrated that CED technology is capable of reducing the sulfur content of light atmospheric gas oil from 5,000-ppm to less than 15-ppm within the laboratory scale. In continuous flow trials, the CED process consistently produced fuel with approximately 20-ppm of sulfur. The process economics study calculated an estimated process cost of $5.70 per product barrel. The Kline Company performed a marketing study to evaluate the possibility of licensing the CED technology. Kline concluded that only 13 refineries harbored opportunity for the CED process. The Kline study and the research team's discussions with prospective refineries led to the conclusion that there were not likely prospects for the licensing of the CED process.

James Boltz

2005-03-01T23:59:59.000Z

323

Extracting Alumina from Coal Flyash through Sodium Aluminate ...  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, 2010 TMS Annual Meeting & Exhibition. Symposium , Alumina and Bauxite. Presentation Title, Extracting Alumina from Coal Flyash ...

324

Open-Domain, Customizable Information Extraction (or: How I ...  

Science Conference Proceedings (OSTI)

... 2. Polysemy • Extract features and cluster similar entities • “NSC” (Iran) ? “NSC” (Malaysia) ... (2) NIL (1) National Security Council (Malaysia) (1) ...

2012-02-27T23:59:59.000Z

325

WATER CONSUMPTION OF ENERGY RESOURCE EXTRACTION, PROCESSING, AND CONVERSION  

E-Print Network (OSTI)

A review of the literature for estimates of water intensity of energyresource extraction, processing to fuels, and conversion to electricity

Erik Mielke; Laura Diaz Anadon; Venkatesh Narayanamurti; Erik Mielke; Laura Diaz Anadon; Venkatesh Narayanamurti

2010-01-01T23:59:59.000Z

326

From Extractive Metallurgy to Materials Engineering: A Personal ...  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, Materials Science & Technology 2013. Symposium, Ralph Lloyd Harris Memorial Symposium. Presentation Title, From Extractive ...

327

Available Technologies: Recovery of Sugars by Solvent Extraction  

The process minimizes toxic byproducts and facilitates ionic liquid reuse. The JBEI invention uses solvent extraction technology, ...

328

Cluster-Centric Approach to News Event Extraction  

Science Conference Proceedings (OSTI)

This paper presents a real-time and multilingual news event extraction system developed at the Joint Research Centre of the European Commission. It is capable of accurately and efficiently extracting violent and natural disaster events from online news. ... Keywords: Event Extraction, Information Aggregation, Shallow Text Processing

Jakub Piskorski; Hristo Tanev; Martin Atkinson; Erik Van Der Goot

2008-06-01T23:59:59.000Z

329

Process for the extraction of strontium from acidic solutions  

DOE Patents (OSTI)

The invention is a process for selectively extracting strontium values from aqueous nitric acid waste solutions containing these and other fission product values. The extractant solution is a macrocyclic polyether in an aliphatic hydrocarbon diluent containing a phase modifier. The process will selectively extract strontium values from nitric acid solutions which are up to 6 molar in nitric acid.

Horwitz, E.P.; Dietz, M.L.

1993-01-01T23:59:59.000Z

330

Process for the extraction of strontium from acidic solutions  

DOE Patents (OSTI)

The invention is a process for selectively extracting strontium values from aqueous nitric acid waste solutions containing these and other fission product values. The extractant solution is a macrocyclic polyether in an aliphatic hydrocarbon diluent containing a phase modifier. The process will selectively extract strontium values from nitric acid solutions which are up to 6 molar in nitric acid. 4 figs.

Horwitz, E.P.; Dietz, M.L.

1994-09-06T23:59:59.000Z

331

A review of vessel extraction techniques and algorithms  

Science Conference Proceedings (OSTI)

Vessel segmentation algorithms are the critical components of circulatory blood vessel analysis systems. We present a survey of vessel extraction techniques and algorithms. We put the various vessel extraction approaches and techniques in perspective ... Keywords: Magnetic resonance angiography, X-ray angiography, medical imaging, neurovascular, vessel extraction

Cemil Kirbas; Francis Quek

2004-06-01T23:59:59.000Z

332

Semantics-aware open information extraction in the biomedical domain  

Science Conference Proceedings (OSTI)

The increasing amount of biomedical scientific literature published on the Web is demanding new tools and methods to automatically process and extract relevant information. Traditional information extraction has focused on recognizing well-defined entities ... Keywords: biomedical domain, relation extraction, semantic annotation

Victoria Nebot; Rafael Berlanga

2011-12-01T23:59:59.000Z

333

Extracting Meronyms for a Biology Knowledge Base Using Distant Supervision  

E-Print Network (OSTI)

proven elusive. This paper reports on a thor- ough exploration of distant supervision to learn a meronymExtracting Meronyms for a Biology Knowledge Base Using Distant Supervision Xiao Ling, Daniel S Information Extraction; Relation Extraction; Distant Su- pervision; Automated Knowledge Base Construction 1

Anderson, Richard

334

Information extraction from concise passages of natural language sources  

Science Conference Proceedings (OSTI)

This paper will present a semi-automated approach for information extraction for ontology construction. The sources used are short news extracts syndicated online. These are used because they contain short passages which provide information in a concise ... Keywords: POS tagging, knowledge engineering, knowledge extraction, knowledge formalization, named entity recognition, natural language processing, ontology construction, ontology population

Sandi Pohorec; Mateja Verli?; Milan Zorman

2010-09-01T23:59:59.000Z

335

Modeling heavy ion ionization loss in the MARS15 code  

E-Print Network (OSTI)

The needs of various accelerator and space projects stimulated recent developments to the MARS Monte Carlo code. One of the essential parts of those is heavy ion ionization energy loss. This paper describes an implementation of several corrections to dE/dx in order to take into account the deviations from the Bethe theory at low and high energies as well as the effect of a finite nuclear size at ultra-relativistic energies. Special attention is paid to the transition energy region where the onset of the effect of a finite nuclear size is observed. Comparisons with experimental data and NIST data are presented.

I. L. Rakhno; N. V. Mokhov; S. I. Striganov

2005-05-05T23:59:59.000Z

336

Spin flip loss in magnetic storage of ultracold neutrons  

E-Print Network (OSTI)

We analyze the depolarization of ultracold neutrons confined in a magnetic field configuration similar to those used in existing or proposed magneto-gravitational storage experiments aiming at a precise measurement of the neutron lifetime. We use an approximate quantum mechanical analysis such as pioneered by Walstrom \\emph{et al} [Nucl. Instrum. Methods Phys. Res. A 599, 82 (2009)]. Our analysis is not restricted to purely vertical modes of neutron motion. The lateral motion is shown to cause the predominant depolarization loss in a magnetic storage trap.

A. Steyerl; C. Kaufman; G. Müller; S. S. Malik; A. M. Desai

2013-07-19T23:59:59.000Z

337

Surfactant loss: Effects of temperature, salinity, and wettability  

SciTech Connect

Adsorption of sodium dodecylsulfate, Triton X-100, decyltrimethylammonium bromide surfactants onto silica gel and Berea sandstone mineral surfaces has been studied as a function of temperature, solution salt concentration, and mineral surface wettability. Adsorption studies using a flow calorimeter were conducted using pure surfactants and minerals. The studies were then extended to the adsorption of one type of commercial surfactant onto both consolidated and crushed Berea sandstone using column techniques. This has allowed the comparison of different methods to evaluate surfactant losses from flowing rather than static surfactant solutions. 20 refs., 15 figs., 37 tabs.

Noll, L.A.; Gall, B.L.; Crocker, M.E.; Olsen, D.K.

1989-05-01T23:59:59.000Z

338

Energy Loss at Propagating Jamming Fronts in Granular Gas Clusters  

E-Print Network (OSTI)

We explore the initial moments of impact between two dense granular clusters in a two-dimensional geometry. The particles are composed of solid CO$_{2}$ and are levitated on a hot surface. Upon collision, the propagation of a dynamic "jamming front" produces a distinct regime for energy dissipation in a granular gas in which the translational kinetic energy decreases by over 90%. Experiments and associated simulations show that the initial loss of kinetic energy obeys a power law in time, $\\Delta E=-Kt^{3/2}$, a form that can be predicted from kinetic arguments.

Justin C. Burton; Peter Y. Lu; Sidney R. Nagel

2013-06-12T23:59:59.000Z

339

No loss fueling station for liquid natural gas vehicles  

SciTech Connect

This patent describes a no loss fueling station for delivery of liquid natural gas (LNG) to a use device such as a motor vehicle. It comprises: a pressure building tank holding a quantity of LNG and gas head; means for delivering LNG to the pressure building tank; means for selectively building the pressure in the pressure building tank; means for selectively reducing the pressure in the pressure building tank; means for controlling the pressure building and pressure reducing means to maintain a desired pressure in the pressure building tank without venting natural gas to the atmosphere; and means for delivering the LNG from the pressure building tank to the use device.

Cieslukowski, R.E.

1992-06-16T23:59:59.000Z

340

Loss compensated negative index material at optical wavelengths  

SciTech Connect

We present a computational approach, allowing for a self-consistent treatment of three-dimensional (3D) fishnet metamaterial operating at 710 nm wavelength coupled to a gain material incorporated into the nanostructure. We show numerically that loss-free negative index material is achievable by incorporating gain material inside the fishnet structure. The effective gain coefficient of the combined fishnet-gain system is much larger than its bulk counterpart and the figure-of-merit (FOM = | Re(n)/Im(n) |) increases dramatically with gain. Transmission, reflection, and absorption data, as well as the retrieved effective parameters, are presented for the fishnet structure with and without gain.

Fang, Anan; Huang, Zhixiang; Koschny, Thomas; Soukoulis, Costas M.

2012-05-20T23:59:59.000Z

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Method for Extracting and Sequestering Carbon Dioxide  

DOE Patents (OSTI)

A method and apparatus to extract and sequester carbon dioxide (CO2) from a stream or volume of gas wherein said method and apparatus hydrates CO2, and reacts the resulting carbonic acid with carbonate. Suitable carbonates include, but are not limited to, carbonates of alkali metals and alkaline earth metals, preferably carbonates of calcium and magnesium. Waste products are metal cations and bicarbonate in solution or dehydrated metal salts, which when disposed of in a large body of water provide an effective way of sequestering CO2 from a gaseous environment.

Rau, Gregory H.; Caldeira, Kenneth G.

2005-05-10T23:59:59.000Z

342

Confidentiality policies and their extraction from programs  

E-Print Network (OSTI)

We examine a well known confidentiality requirement called noninterference and argue that many systems do not meet this requirement despite maintaining the privacy of its users. We discuss a weaker requirement called incident-insensitive noninterference that captures why these systems maintain the privacy of its users while possibly not satisfying noninterference. We extend this requirement to depend on dynamic information in a novel way. Lastly, we present a method based on model checking to extract from program source code the dynamic incident-insensitive noninterference policy that the given program obeys.

Michael Carl Tschantz; Jeannette M. Wing

2007-01-01T23:59:59.000Z

343

Enhanced Attenuation Technologies: Passive Soil Vapor Extraction  

SciTech Connect

Passive soil vapor extraction (PSVE) is an enhanced attenuation (EA) approach that removes volatile contaminants from soil. The extraction is driven by natural pressure gradients between the subsurface and atmosphere (Barometric Pumping), or by renewable sources of energy such as wind or solar power (Assisted PSVE). The technology is applicable for remediating sites with low levels of contamination and for transitioning sites from active source technologies such as active soil vapor extraction (ASVE) to natural attenuation. PSVE systems are simple to design and operate and are more cost effective than active systems in many scenarios. Thus, PSVE is often appropriate as an interim-remedial or polishing strategy. Over the past decade, PSVE has been demonstrated in the U.S. and in Europe. These demonstrations provide practical information to assist in selecting, designing and implementing the technology. These demonstrations indicate that the technology can be effective in achieving remedial objectives in a timely fashion. The keys to success include: (1) Application at sites where the residual source quantities, and associated fluxes to groundwater, are relatively low; (2) Selection of the appropriate passive energy source - barometric pumping in cases with a deep vadose zone and barrier (e.g., clay) layers that separate the subsurface from the atmosphere and renewable energy assisted PSVE in other settings and where higher flow rates are required. (3) Provision of sufficient access to the contaminated vadose zones through the spacing and number of extraction wells. This PSVE technology report provides a summary of the relevant technical background, real-world case study performance, key design and cost considerations, and a scenario-based cost evaluation. The key design and cost considerations are organized into a flowchart that dovetails with the Enhanced Attenuation: Chlorinated Organics Guidance of the Interstate Technology and Regulatory Council (ITRC). The PSVE flowchart provides a structured process to determine if the technology is, or is not, reasonable and defensible for a particular site. The central basis for that decision is the expected performance of PSVE under the site specific conditions. Will PSVE have sufficient mass removal rates to reduce the release, or flux, of contamination into the underlying groundwater so that the site can meet it overall remedial objectives? The summary technical information, case study experiences, and structured decision process provided in this 'user guide' should assist environmental decision-makers, regulators, and engineers in selecting and successfully implementing PSVE at appropriate sites.

Vangelas, K.; Looney, B.; Kamath, R.; Adamson, D.; Newell, C.

2010-03-15T23:59:59.000Z

344

Kerogen extraction from subterranean oil shale resources  

Science Conference Proceedings (OSTI)

The present invention is directed to methods for extracting a kerogen-based product from subsurface (oil) shale formations, wherein such methods rely on fracturing and/or rubblizing portions of said formations so as to enhance their fluid permeability, and wherein such methods further rely on chemically modifying the shale-bound kerogen so as to render it mobile. The present invention is also directed at systems for implementing at least some of the foregoing methods. Additionally, the present invention is also directed to methods of fracturing and/or rubblizing subsurface shale formations and to methods of chemically modifying kerogen in situ so as to render it mobile.

Looney, Mark Dean (Houston, TX); Lestz, Robert Steven (Missouri City, TX); Hollis, Kirk (Los Alamos, NM); Taylor, Craig (Los Alamos, NM); Kinkead, Scott (Los Alamos, NM); Wigand, Marcus (Los Alamos, NM)

2010-09-07T23:59:59.000Z

345

Kerogen extraction from subterranean oil shale resources  

DOE Patents (OSTI)

The present invention is directed to methods for extracting a kerogen-based product from subsurface (oil) shale formations, wherein such methods rely on fracturing and/or rubblizing portions of said formations so as to enhance their fluid permeability, and wherein such methods further rely on chemically modifying the shale-bound kerogen so as to render it mobile. The present invention is also directed at systems for implementing at least some of the foregoing methods. Additionally, the present invention is also directed to methods of fracturing and/or rubblizing subsurface shale formations and to methods of chemically modifying kerogen in situ so as to render it mobile.

Looney, Mark Dean (Houston, TX); Lestz, Robert Steven (Missouri City, TX); Hollis, Kirk (Los Alamos, NM); Taylor, Craig (Los Alamos, NM); Kinkead, Scott (Los Alamos, NM); Wigand, Marcus (Los Alamos, NM)

2009-03-10T23:59:59.000Z

346

SEPARATION OF URANYL NITRATE BY EXTRACTION  

DOE Patents (OSTI)

A process is presented for obtaining U/sup 233/ from solutions containing Pa/sup 233/. A carrier precipitate, such as MnO/sub 2/, is formed in such solutions and carries with it the Pa/sup 233/ present. This precipitate is then dissolved in nitric acid and the solution is aged to allow decay of the Pa/ sup 233/ into U/sup 233/. After a sufficient length of time the U/sup 233/ bearing solution is made 2.5 to 4.5 Molar in manganese nitrate by addition thereof, and the solution is then treated with ether to obtain uranyl nitrate by solvent extraction techniques.

Stoughton, R.W.; Steahly, F.L.

1958-08-26T23:59:59.000Z

347

Hot cell shield plug extraction apparatus  

DOE Patents (OSTI)

An apparatus is provided for moving shielding plugs into and out of holes in concrete shielding walls in hot cells for handling radioactive materials without the use of external moving equipment. The apparatus provides a means whereby a shield plug is extracted from its hole and then swung approximately 90 degrees out of the way so that the hole may be accessed. The apparatus uses hinges to slide the plug in and out and to rotate it out of the way, the hinge apparatus also supporting the weight of the plug in all positions, with the load of the plug being transferred to a vertical wall by means of a bolting arrangement.

Knapp, Philip A. (Moore, ID); Manhart, Larry K. (Pingree, ID)

1995-01-01T23:59:59.000Z

348

Hadron Mass Extraction from Lattice QCD  

E-Print Network (OSTI)

The extraction of quantities from lattice QCD calculations at realistic quark masses is of considerable importance. Whilst physical quark masses are some way off, the recent advances in the calculation of hadron masses within full QCD now invite improved extrapolation methods. We show that, provided the correct chiral behaviour of QCD is respected in the extrapolation to realistic quark masses, one can indeed obtain a fairly reliable determination of masses, the sigma commutator and the J parameter. We summarise these findings by presenting the nonanalytic behaviour of nucleon and rho masses in the standard Edinburgh plot.

S. V. Wright; D. B. Leinweber; A. W. Thomas; K. Tsushima

2001-11-27T23:59:59.000Z

349

Beam Loss Studies for Rare Isotope Driver Linacs Final Report  

Science Conference Proceedings (OSTI)

The Fortran 90 RIAPMTQ/IMPACT code package is a pair of linked beam-dynamics simulation codes that have been developed for end-to-end computer simulations of multiple-charge-state heavy-ion linacs for future exotic-beam facilities. These codes have multiple charge-state capability, and include space-charge forces. The simulations can extend from the low-energy beam-transport line after an ECR ion source to the end of the linac. The work has been performed by a collaboration including LANL, LBNL, ANL, and MSU. The code RIAPMTQ simulates the linac front-end beam dynamics including the LEBT, RFQ, and MEBT. The code IMPACT simulates the beam dynamics of the main superconducting linac. The codes have been benchmarked for rms beam properties against previously existing codes at ANL and MSU. The codes allow high-statistics runs on parallel supercomputing platforms, particularly at NERSC at LBNL, for studies of beam losses. The codes also run on desktop PC computers for low-statistics work. The code package is described in more detail in a recent publication [1] in the Proceedings of PAC07 (2007 US Particle Accelerator Conference). In this report we describe the main activities for the FY07 beam-loss studies project using this code package.

Wangler, T P; Kurennoy, S S; Billen, J H; Crandall, K R; Qiang, J; Ryne, R D; Mustapha, B; Ostroumov, P; Zhao, Q; York, and R. C.

2008-03-26T23:59:59.000Z

350

Loss of spent fuel pool cooling PRA: Model and results  

Science Conference Proceedings (OSTI)

This letter report documents models for quantifying the likelihood of loss of spent fuel pool cooling; models for identifying post-boiling scenarios that lead to core damage; qualitative and quantitative results generated for a selected plant that account for plant design and operational practices; a comparison of these results and those generated from earlier studies; and a review of available data on spent fuel pool accidents. The results of this study show that for a representative two-unit boiling water reactor, the annual probability of spent fuel pool boiling is 5 {times} 10{sup {minus}5} and the annual probability of flooding associated with loss of spent fuel pool cooling scenarios is 1 {times} 10{sup {minus}3}. Qualitative arguments are provided to show that the likelihood of core damage due to spent fuel pool boiling accidents is low for most US commercial nuclear power plants. It is also shown that, depending on the design characteristics of a given plant, the likelihood of either: (a) core damage due to spent fuel pool-associated flooding, or (b) spent fuel damage due to pool dryout, may not be negligible.

Siu, N.; Khericha, S.; Conroy, S.; Beck, S.; Blackman, H.

1996-09-01T23:59:59.000Z

351

Trapped electron losses by interactions with coherent VLF waves  

SciTech Connect

VLF whistler waves from lightning enter the magnetosphere and cause the precipitation of energetic trapped electrons by pitch angle scattering. These events, known as Lightning-induced Electron Precipitation (LEP) have been detected by satellite and rocket instruments and by perturbations of VLF waves traveling in the earth-ionosphere waveguide. Detailed comparison of precipitating electron energy spectra and time dependence are in general agreement with calculations of trapped electron interactions with ducted whistler waves. In particular the temporal structure of the precipitation and the dynamic energy spectra of the electrons confirm this interpretation of the phenomena. There are discrepancies between observed and measured electron flux intensities and pitch angle distributions, but these quantities are sensitive to unknown wave intensities and trapped particle fluxes near the loss cone angle. The overall effect of lightning generated VLF waves on the lifetime of trapped electrons is still uncertain. The flux of electrons deflected into the bounce loss cone by a discrete whistler wave has been measured in a few cases. However, the area of the precipitation region is not known, and thus the total number of electrons lost in an LEP event can only be estimated. While the LEP events are dramatic, more important effects on trapped electrons may arise from the small but numerous deflections which increase the pitch angle diffusion rate of the electron population. {copyright} {ital 1996 American Institute of Physics.}

Walt, M.; Inan, U.S. [Space, Telecommunications and Radioscience Laboratory, Stanford University, Stanford, California (United States); Voss, H.D. [Lockheed Missiles and Space Co. (United States)

1996-07-01T23:59:59.000Z

352

Kuhn Losses Regained: Van Vleck from Spectra to Susceptibilities  

E-Print Network (OSTI)

We follow the trajectory of John H. Van Vleck from his 1926 Bulletin for the National Research Council (NRC) on the old quantum theory to his 1932 book, The Theory of Electric and Magnetic Susceptibilities. We highlight the continuity of formalism and technique in the transition from dealing with spectra in the old quantum theory to dealing with susceptibilities in the new quantum mechanics. Our main focus is on the checkered history of a numerical factor in the Langevin-Debye formula for the electric susceptibility of gases. Classical theory predicts that this factor is equal to 1/3. The old quantum theory predicted values up to 14 times higher. Van Vleck showed that quantum mechanics does away with this "wonderful nonsense" (as Van Vleck called it) and restores the classical value 1/3. The Langevin-Debye formula thus provides an instructive example of a Kuhn loss in one paradigm shift that was regained in the next. In accordance with Kuhn's expectation that textbooks sweep Kuhn losses under the rug, Van Vle...

Midwinter, Charles

2012-01-01T23:59:59.000Z

353

Ethanol Extraction Technologies Inc EETI | Open Energy Information  

Open Energy Info (EERE)

Extraction Technologies Inc EETI Extraction Technologies Inc EETI Jump to: navigation, search Name Ethanol Extraction Technologies Inc (EETI) Place New York, New York Zip 10036-2601 Product New York-based bio-technology and ethanol production company with a patent for the exclusive use of the proprietary process of continuously removing and isolating ethanol during its fermentation process. References Ethanol Extraction Technologies Inc (EETI)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Ethanol Extraction Technologies Inc (EETI) is a company located in New York, New York . References ↑ "Ethanol Extraction Technologies Inc (EETI)" Retrieved from "http://en.openei.org/w/index.php?title=Ethanol_Extraction_Technologies_Inc_EETI&oldid=345167

354

Fuel grade ethanol by solvent extraction: Final subcontract report  

DOE Green Energy (OSTI)

This report summarizes final results for ethanol recovery by solvent extraction and extractive distillation. At conclusion this work can be summarized as ethanol dehydration and recovery dilute fermentates is feasible using liquid/liquid extraction and extractive distillation. Compared to distillation, the economics are more attractive for less than 5 wt % ethanol. However, an economic bias in favor of SEED appears to exist even for 10 wt % feeds. It is of particular interest to consider the group extraction of ethanol and acetic acid followed by conversion to a mixture of ethanol and ethyl acetate. The latter species is a more valuable commodity and group extraction of inhibitory species is one feature of liquid/liquid extraction that is not easily accomodated using distillation. Upflow immobilized reactors offer the possibility of achieving high substrate conversion while also maintaining low metabolite concentrations. However, many questions remain to be answered with such a concept. 135 refs., 42 figs., 61 tabs.

Tedder, D.W.

1987-04-01T23:59:59.000Z

355

Non-Ideal Behavior in Solvent Extraction  

SciTech Connect

This report presents a summary of the work performed to meet FCR&D level 3 milestone M31SW050801, 'Complete the year-end report summarizing FY11 experimental and modeling activities.' This work was carried out under the auspices of the Non-Ideality in Solvent Extraction Systems FCR&D work package. The report summarizes our initial considerations of potential influences that non-ideal chemistry may impose on computational prediction of outcomes in solvent extraction systems. The report is packaged into three separate test cases where a robustness of the prediction by SXFIT program is under scrutiny. The computational exercises presented here emphasize the importance of accurate representation of both an aqueous and organic mixtures when modeling liquid-liquid distribution systems. Case No.1 demonstrates that non-ideal behavior of HDEHP in aliphatic diluents, such as n-dodecane, interferes with the computation. Cases No.2 and No.3 focus on the chemical complexity of aqueous electrolyte mixtures. Both exercises stress the need for an improved thermodynamic model of an aqueous environment present in the europium distribution experiments. Our efforts for year 2 of this project will focus on the improvements of aqueous and non-aqueous solution models using fundamental physical properties of mixtures acquired experimentally in our laboratories.

Peter Zalupski

2011-09-01T23:59:59.000Z

356

Chaotic spectra: How to extract dynamic information  

DOE Green Energy (OSTI)

Nonlinear dynamics is applied to chaotic unassignable atomic and molecular spectra with the aim of extracting detailed information about regular dynamic motions that exist over short intervals of time. It is shown how this motion can be extracted from high resolution spectra by doing low resolution studies or by Fourier transforming limited regions of the spectrum. These motions mimic those of periodic orbits (PO) and are inserts into the dominant chaotic motion. Considering these inserts and the PO as a dynamically decoupled region of space, resonant scattering theory and stabilization methods enable us to compute ladders of resonant states which interact with the chaotic quasi-continuum computed in principle from basis sets placed off the PO. The interaction of the resonances with the quasicontinuum explains the low resolution spectra seen in such experiments. It also allows one to associate low resolution features with a particular PO. The motion on the PO thereby supplies the molecular movements whose quantization causes the low resolution spectra. Characteristic properties of the periodic orbit based resonances are discussed. The method is illustrated on the photoabsorption spectrum of the hydrogen atom in a strong magnetic field and on the photodissociation spectrum of H/sub 3//sup +/. Other molecular systems which are currently under investigation using this formalism are also mentioned. 53 refs., 10 figs., 2 tabs.

Taylor, H.S.; Gomez Llorente, J.M.; Zakrzewski, J.; Kulander, K.C.

1988-10-01T23:59:59.000Z

357

Feature extraction for structural dynamics model validation  

SciTech Connect

This study focuses on defining and comparing response features that can be used for structural dynamics model validation studies. Features extracted from dynamic responses obtained analytically or experimentally, such as basic signal statistics, frequency spectra, and estimated time-series models, can be used to compare characteristics of structural system dynamics. By comparing those response features extracted from experimental data and numerical outputs, validation and uncertainty quantification of numerical model containing uncertain parameters can be realized. In this study, the applicability of some response features to model validation is first discussed using measured data from a simple test-bed structure and the associated numerical simulations of these experiments. issues that must be considered were sensitivity, dimensionality, type of response, and presence or absence of measurement noise in the response. Furthermore, we illustrate a comparison method of multivariate feature vectors for statistical model validation. Results show that the outlier detection technique using the Mahalanobis distance metric can be used as an effective and quantifiable technique for selecting appropriate model parameters. However, in this process, one must not only consider the sensitivity of the features being used, but also correlation of the parameters being compared.

Hemez, Francois [Los Alamos National Laboratory; Farrar, Charles [Los Alamos National Laboratory; Park, Gyuhae [Los Alamos National Laboratory; Nishio, Mayuko [UNIV OF TOKYO; Worden, Keith [UNIV OF SHEFFIELD; Takeda, Nobuo [UNIV OF TOKYO

2010-11-08T23:59:59.000Z

358

SANS Study of Cellulose Extracted from Switchgrass  

SciTech Connect

AbstractLignocellulosic biomass, an abundant renewable natural resource, has the potential to play a major role in generation of renewable biofuels through its conversion to bio-ethanol. Unfortunately, it is a complex biological composite material that shows significant recalcitrance making it a cost-ineffective feedstock for bioethanol production. Small-angle neutron scattering (SANS) was employed to probe the multi-scale structure of cellulosic materials. Cellulose was extracted from milled native switchgrass and switchgrass that had undergone the dilute acid pretreatment method to disrupt the lignocellulose structure. The high-Q structural feature (Q > 0.07 -1) can be assigned to cellulose fibrils based on comparison with the switchgrass purified by solvent extraction of native and dilute acid pretreated and a commercial preparation of microcrystalline cellulose. Dilute acid pretreatment results in an increase in the smallest structural size, a decrease in the interconnectivity of the fibrils; and no change in the smooth domain boundaries at length scales larger than 1000 .

Pingali, Sai Venkatesh [ORNL; Urban, Volker S [ORNL; Heller, William T [ORNL; McGaughey, Joseph [ORNL; O' Neill, Hugh Michael [ORNL; Foston, Marcus B [ORNL; Myles, Dean A A [ORNL; Ragauskas, Arthur J [ORNL; Evans, Barbara R [ORNL

2010-01-01T23:59:59.000Z

359

Reducing Energy Usage in Extractive Distillation  

E-Print Network (OSTI)

Butadiene 1:3 is separated from other C4-hydrocarbons by extractive distillation in a sieve plate tower. Prior to the development work to be described, the pressure in the extraction tower was controlled at a fixed value. The tower pressure-boilup control loop did not behave satisfactorily in the presence of non-condensables which entered with the feed. The capacity of the flooded reflux drum condenser for the tower was limiting production during summer months. The tower pressure control loop was put on manual. The pressure was allowed to drop to its lowest attainable value for the existing conditions of boilup and condenser cooling capability. This manner of operation is known as floating pressure control. By taking advantage of the higher relative volatility at the lower tower pressure, energy usage was reduced and there was an increase in production capacity. The tower operation at a lower temperature reduced tower and reboiler fouling. Substantial savings have resulted from these improvements. The annual energy consumption has been reduced by 25% and maximum productive capacity is higher by 15%. The rate of tower and reboiler fouling has not been fully quantified but is greatly reduced. A more stable tower operation has also contributed to higher productivity and reduced energy usage. Venting of non-condensables does not affect tower stability and the operators have adapted well to the new control strategy.

Saxena, A. C.; Bhandari, V. A.

1985-05-01T23:59:59.000Z

360

White LED with High Package Extraction Efficiency  

Science Conference Proceedings (OSTI)

The goal of this project is to develop a high efficiency phosphor converting (white) Light Emitting Diode (pcLED) 1-Watt package through an increase in package extraction efficiency. A transparent/translucent monolithic phosphor is proposed to replace the powdered phosphor to reduce the scattering caused by phosphor particles. Additionally, a multi-layer thin film selectively reflecting filter is proposed between blue LED die and phosphor layer to recover inward yellow emission. At the end of the project we expect to recycle approximately 50% of the unrecovered backward light in current package construction, and develop a pcLED device with 80 lm/W{sub e} using our technology improvements and commercially available chip/package source. The success of the project will benefit luminous efficacy of white LEDs by increasing package extraction efficiency. In most phosphor-converting white LEDs, the white color is obtained by combining a blue LED die (or chip) with a powdered phosphor layer. The phosphor partially absorbs the blue light from the LED die and converts it into a broad green-yellow emission. The mixture of the transmitted blue light and green-yellow light emerging gives white light. There are two major drawbacks for current pcLEDs in terms of package extraction efficiency. The first is light scattering caused by phosphor particles. When the blue photons from the chip strike the phosphor particles, some blue light will be scattered by phosphor particles. Converted yellow emission photons are also scattered. A portion of scattered light is in the backward direction toward the die. The amount of this backward light varies and depends in part on the particle size of phosphors. The other drawback is that yellow emission from phosphor powders is isotropic. Although some backward light can be recovered by the reflector in current LED packages, there is still a portion of backward light that will be absorbed inside the package and further converted to heat. Heat generated in the package may cause a deterioration of encapsulant materials, affecting the performance of both the LED die and phosphor, leading to a decrease in the luminous efficacy over lifetime. Recent studies from research groups at Rensselaer Polytechnic Institute found that, under the condition to obtain a white light, about 40% of the light is transmitted outward of the phosphor layer and 60% of the light is reflected inward.1,2 It is claimed that using scattered photon extraction (SPE) technique, luminous efficacy is increased by 60%. In this project, a transparent/translucent monolithic phosphor was used to replace the powdered phosphor layer. In the normal pcLED package, the powdered phosphor is mixed with silicone either to be deposited on the top of LED die forming a chip level conversion (CLC) white LED or to be casted in the package forming a volume conversion white LED. In the monolithic phosphors there are no phosphor powder/silicone interfaces so it can reduce the light scattering caused by phosphor particles. Additionally, a multi-layer thin film selectively reflecting filter is inserted in the white LED package between the blue LED die and phosphor layer. It will selectively transmit the blue light from the LED die and reflect the phosphor's yellow inward emission outward. The two technologies try to recover backward light to the outward direction in the pcLED package thereby improving the package extraction efficiency.

Yi Zheng; Matthew Stough

2008-09-30T23:59:59.000Z

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Heat-Loss Testing of Solel's UVAC3 Parabolic Trough Receiver  

DOE Green Energy (OSTI)

For heat-loss testing on two Solel UVAC3 parabolic trough receivers, a correlation developed predicts receiver heat loss as a function of the difference between avg absorber and ambient temperatures.

Burkholder, F.; Kutscher, C.

2008-01-01T23:59:59.000Z

362

Diagnostics for Causes of Packet Loss in a High Performance Data Transfer System  

E-Print Network (OSTI)

limited to the current loss rate and some measure of historical loss rates. Arguably, this limited view of Electrical and Computer Engineering and Coordinated Science Laboratory, University of Illinois Urbana

Dickens, Phillip M.

363

Losses of Offsite Power at U.S. Nuclear Power Plants - 2011  

Science Conference Proceedings (OSTI)

This report describes the loss of offsite power experience at U.S. nuclear power plants during the year 2011 and provides insights into the causes of offsite power losses during the period 2002–2011.

2012-06-11T23:59:59.000Z

364

Wetland Loss Is Not The Fault of Any One Company | America's ...  

U.S. Energy Information Administration (EIA)

Wetland Loss Is Not The Fault of Any One Company. By: Berwick Duvall II, Houma Courrier | 9.28.2007 September 28, 2007 Wetlands loss is not the fault ...

365

Nonlinear and linear models for losses of plug in hybrid electric vehicle: A computation approach  

Science Conference Proceedings (OSTI)

This paper presents nonlinear and linear models for the losses of Plug in Hybrid Electric Vehicle (PHEV). An accurate model to calculate the PHEV losses for just one vehicle is not remarkable. However

2013-01-01T23:59:59.000Z

366

A Method for Estimating Crop Losses from Hail in Uninsured Periods and Regions  

Science Conference Proceedings (OSTI)

The insurance industry, insurance regulatory bodies, and scientists investigating climate change all desire long records of hail losses. Existing loss records for some states cover the 1948–present period; this span is helpful but is not long ...

David Changnon; Stanley A. Changnon; Suzy S. Changnon

2001-01-01T23:59:59.000Z

367

Regional earthquake loss estimation : role of transportation network, sensitivity and uncertainty, and risk mitigation  

E-Print Network (OSTI)

Large earthquakes near densely populated areas such as the 1994 Northridge and 1995 Kobe events have caused extensive damage to the physical infrastructure and losses to the regional and national economies. Economic losses ...

Karaca, Erdem, 1976-

2005-01-01T23:59:59.000Z

368

Study of the Optimum Extraction of Coal Resources Based on the Rate of Comprehensive Extraction  

Science Conference Proceedings (OSTI)

Low efficiency and waste are the main problems in the process of coal resources extraction in China. Taking the utilization and recovery rate into account, the article has analyzed the factors influencing the utilization and recovery rate and given some ... Keywords: Coal Resources, Utilization Rate, Recovery Rate, Resource Taxes, Dynamic Optimization

Sun Dachao; Wei Xiaoping; Lu Nan

2010-05-01T23:59:59.000Z

369

Closeout of IE Bulletin 80-15: Possible loss of Emergency Notification System (ENS) with loss of offsite power  

SciTech Connect

Documentation is provided in this report for the closeout of IE Bulletin 80-15 for nuclear power reactors. This bulletin pertained to a possible loss of the Emergency Notification System (ENS) upon loss of offsite power. Closeout is based on the implementation and verification of six (6) required actions by licensees of nuclear power reactors in operation or near to receiving an operating license when the bulletin was issued on June 18, 1980. Evaluation of utility responses and NRC/Region inspection reports indicates that the bulletin is closed for all of the 69 nuclear power reactors to which it was issued for action and which were not shut down indefinitely or permanently at the time of issuance of this report. Background information is supplied in the Introduction and Appendix A. Nuclear fuel facilities as well as nuclear power facilities were identified in the enclosures to the bulletin. However, per an NRC memorandum, the closeout of the bulletin for nuclear fuel facilities is not within the scope of this report.

Foley, W.J.; Dean, R.S.; Hennick, A. (Parameter, Inc., Elm Grove, WI (USA))

1990-12-01T23:59:59.000Z

370

Study of high energy ion loss during hydrogen minority heating in TFTR  

DOE Green Energy (OSTI)

High energy ion loss during hydrogen minority ICRF heating is measured and compared with the loss of the D-D fusion products. During H minority heating a relatively large loss of high energy ions is observed at 45{degrees} below the outer midplane, with or without simultaneous NBI heating. This increase is most likely due to a loss of the minority tail protons, a possible model for this process is described.

Park, J.; Zweben, S.J.

1994-03-01T23:59:59.000Z

371

Using Zeolites Synthesized from Fly Ash to Reduce Ammonia Loss to the Environment  

Science Conference Proceedings (OSTI)

This interim report describes studies using zeolites synthesized from fly ash to reduce ammonia loss to the environment.

2002-02-19T23:59:59.000Z

372

Supercritical Fluid Extraction of Plutonium and Americium from Soil  

Science Conference Proceedings (OSTI)

Supercritical fluid extraction (SFE) of plutonium and americium from soil was successfully demonstrated using supercritical fluid carbon dioxide solvent augmented with organophosphorus and beta-diketone complexants. Spiked Idaho soils were chemically and radiologically characterized, then extracted with supercritical fluid carbon dioxide at 2,900 psi and 65°C containing varying concentrations of tributyl phosphate (TBP) and thenoyltrifluoroacetone (TTA). A single 45 minute SFE with 2.7 mol% TBP and 3.2 mol% TTA provided as much as 88% ± 6.0 extraction of americium and 69% ± 5.0 extraction of plutonium. Use of 5.3 mol% TBP with 6.8 mol% of the more acidic beta-diketone hexafluoroacetylacetone (HFA) provided 95% ± 3.0 extraction of americium and 83% ± 5.0 extraction of plutonium in a single 45 minute SFE at 3,750 psi and 95°C. Sequential chemical extraction techniques were used to chemically characterize soil partitioning of plutonium and americium in pre-SFE soil samples. Sequential chemical extraction techniques demonstrated that spiked plutonium resides primarily (76.6%) in the sesquioxide fraction with minor amounts being absorbed by the oxidizable fraction (10.6%) and residual fractions (12.8%). Post-SFE soils subjected to sequential chemical extraction characterization demonstrated that 97% of the oxidizable, 78% of the sesquioxide and 80% of the residual plutonium could be removed using SFE. These preliminary results show that SFE may be an effective solvent extraction technique for removal of actinide contaminants from soil.

Fox, Robert Vincent; Mincher, Bruce Jay

2002-08-01T23:59:59.000Z

373

Supercritical Fluid Extraction of Plutonium and Americium from Soil  

Science Conference Proceedings (OSTI)

Supercritical fluid extraction (SFE) of plutonium and americium from soil was successfully demonstrated using supercritical fluid carbon dioxide solvent augmented with organophosphorus and beta-diketone complexants. Spiked Idaho soils were chemically and radiologically characterized, then extracted with supercritical fluid carbon dioxide at 2,900 psi and 65 C containing varying concentrations of tributyl phosphate (TBP) and thenoyltrifluoroacetone (TTA). A single 45 minute SFE with 2.7 mol% TBP and 3.2 mol% TTA provided as much as 88% {+-} 6.0 extraction of americium and 69% {+-} 5.0 extraction of plutonium. Use of 5.3 mol% TBP with 6.8 mol% of the more acidic beta-diketone hexafluoroacetylacetone (HFA) provided 95% {+-} 3.0 extraction of americium and 83% {+-} 5.0 extraction of plutonium in a single 45 minute SFE at 3,750 psi and 95 C. Sequential chemical extraction techniques were used to chemically characterize soil partitioning of plutonium and americium in pre-SFE soil samples. Sequential chemical extraction techniques demonstrated that spiked plutonium resides primarily (76.6%) in the sesquioxide fraction with minor amounts being absorbed by the oxidizable fraction (10.6%) and residual fractions (12.8%). Post-SFE soils subjected to sequential chemical extraction characterization demonstrated that 97% of the oxidizable, 78% of the sesquioxide and 80% of the residual plutonium could be removed using SFE. These preliminary results show that SFE may be an effective solvent extraction technique for removal of actinide contaminants from soil.

Fox, R.V.; Mincher, B.J.

2002-05-23T23:59:59.000Z

374

Theoretical developments in heavy and light flavor energy loss  

E-Print Network (OSTI)

Recent developments in the many-body perturbative QCD theory of inelastic parton interactions in dense nuclear matter and the phenomenology of strongly-interacting hard probes in heavy ion collisions are reviewed. We highlight the progress that has been made toward consistent comparison between radiative and collisional energy loss, the exploration of novel heavy flavor suppression mechanisms in the quark-gluon plasma, and the determination of the stopping power of cold nuclear matter. Future directions and opportunities for jet physics in nuclear collisions, enabled by the unprecedentedly high center of mass energies at the LHC, are also discussed. We propose that the physics of jet shapes and a generalizations of the well-understood inclusive particle suppression in the QGP will provide a new differential, and accurate test of the underlying QCD theory and a new precision tool for jet tomography at the LHC.

Ivan Vitev

2008-05-30T23:59:59.000Z

375

Temporary Losses of Highway Capacity and Impacts on Performance  

NLE Websites -- All DOE Office Websites (Extended Search)

3 3 Temporary Losses of Highway Capacity and Impacts on Performance May 2002 Prepared by S. M. Chin O. Franzese D. L. Greene H. L. Hwang Oak Ridge National Laboratory Oak Ridge, Tennessee R. C. Gibson The University of Tennessee Knoxville, Tennessee DOCUMENT AVAILABILITY Reports produced after January 1, 1996, are generally available free via the U.S. Department of Energy (DOE) Information Bridge: Web site: http://www.osti.gov/bridge Reports produced before January 1, 1996, may be purchased by members of the public from the following source: National Technical Information Service 5285 Port Royal Road Springfield, VA 22161 Telephone: 703-605-6000 (1-800-553-6847) TDD: 703-487-4639 Fax: 703-605-6900 E-mail: info@ntis.fedworld.gov

376

Starlight and Sandstorms: Mass Loss Mechanisms on the AGB  

E-Print Network (OSTI)

There are strong observational indications that the dense slow winds of cool luminous AGB stars are driven by radiative pressure on dust grains which form in the extended atmospheres resulting from pulsation-induced shocks. For carbon stars, detailed models of outflows driven by amorphous carbon grains show good agreement with observations. Some still existing discrepancies may be due to a simplified treatment of cooling in shocks, drift of the grains relative to the gas, or effects of giant convection cells or dust-induced pattern formation. For stars with C/O alternative is scattering by Fe-free silicate grains with radii of a few tenths of a micron. In this scenario one should expect less circumstellar reddening for M- and S-type AGB stars than for C-stars with comparable stellar parameters and mass loss rates.

Höfner, Susanne

2011-01-01T23:59:59.000Z

377

Generator loss of field study for AEP's Rockport plant  

SciTech Connect

Generator loss of field (LOF) conditions occur rarely. However, when LOF and consequent out-of-step conditions occur, the resultant high currents and pulsating torques can damage the turbine-generator under some conditions. Also the electrical system near the disturbance can be impacted by abnormal levels and cyclic swings of power, VArs, and voltages. This article describes the computed performance of AEP's remotely-located 2600 MW Rockport plant after simulated LOF disturbances to one of its 1300 MW cross-compound units. It shows the transmission facilities near Rockport, as well as nearby plants. Because of this topology, LOF on one unit can significantly impact the adjacent Rockport unit, and the reactive power drain could impose a heavy burden on transmission, impacting local voltages.

Rana, R.D.; Schulz, R.P.; Heyeck, M.; Boyer, T.R. Jr. (American Electric Power, Inc., Canton, OH (USA))

1990-04-01T23:59:59.000Z

378

Selective Loss and Preservation of Biographical Knowledge: Implications for Representation  

E-Print Network (OSTI)

this paper we review the evidence from individual patients with either selective loss or preservation of personrelated knowledge (e.g. recognition of a person as famous, knowledge of a person's occupation, nationality and any uniquely identifying information) in public and autobiographical domains, associated with various pathologies (e.g. cerebrovascular involvement, herpes simplex viral encephalitis, particular forms of dementia). Furthermore, we address explanations of the phenomena and raise issues for future research. The focus of our review is on conceptual representation in semantic memory rather than on pure expressive problems, as difficulties in retrieving names (in proper name anomia, for example) appear to involve separate levels of processing (e.g. Valentine et al., 1996)

Catherine Haslam; Janice Kay; J. Richard Hanley

2002-01-01T23:59:59.000Z

379

Towards experimentally testing the paradox of black hole information loss  

E-Print Network (OSTI)

Information about the collapsed matter in a black hole will be lost if Hawking radiations are truly thermal. Recent studies discover that information can be transmitted from a black hole by Hawking radiations, due to their spectrum deviating from exact thermality when back reaction is considered. In this paper, we focus on the spectroscopic features of Hawking radiation from a Schwarzschild black hole, contrasting the differences between the nonthermal and thermal spectra. Of great interest, we find that the energy covariances of Hawking radiations for the thermal spectrum are exactly zero, while the energy covariances are non-trivial for the nonthermal spectrum. Consequently, the nonthermal spectrum can be distinguished from the thermal one by counting the energy covariances of successive emissions, which provides an avenue towards experimentally testing the long-standing "information loss paradox".

Zhang, Baocheng; Zhan, Ming-sheng; You, Li; 10.1103/PhysRevD.87.044006

2013-01-01T23:59:59.000Z

380

Instrumentation for Evaluating PV System Performance Losses from Snow  

DOE Green Energy (OSTI)

When designing a photovoltaic (PV) system for northern climates, the prospective installation should be evaluated with respect to the potentially detrimental effects of snow preventing solar radiation from reaching the PV cells. The extent to which snow impacts performance is difficult to determine because snow events also increase the uncertainty of the solar radiation measurement, and the presence of snow needs to be distinguished from other events that can affect performance. This paper describes two instruments useful for evaluating PV system performance losses from the presence of snow: (1) a pyranometer with a heater to prevent buildup of ice and snow, and (2) a digital camera for remote retrieval of images to determine the presence of snow on the PV array.

Marion, B.; Rodriguez, J.; Pruett, J.

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Overview of NASA supported Stirling thermodynamic loss research  

DOE Green Energy (OSTI)

The National Aeronautics and Space Administration (NASA) is funding research to characterize Stirling machine thermodynamic losses. NASA`s primary goal is to improve Stirling design codes to support engine development for space and terrestrial power. However, much of the fundamental data is applicable to Stirling cooler and heat pump applications. The research results are reviewed. Much has been learned about oscillating-flow hydrodynamics, including laminar/turbulent transition, and tabulated data has been documented for further analysis. Now, with a better understanding of the oscillator-flow field, it is time to begin measuring the effects of oscillating flow and oscillating pressure level on heat transfer in heat exchanger flow passages and in cylinders. This critical phase of the work is just beginning.

Tew, R.C.; Geng, S.M.

1994-09-01T23:59:59.000Z

382

Casimir forces in multilayer magnetodielectrics with both gain and loss  

Science Conference Proceedings (OSTI)

A path-integral approach to the quantization of the electromagnetic field in a linearly amplifying magnetodielectric medium is presented. Two continua of inverted harmonic oscillators are used to describe the polarizability and magnetizability of the amplifying medium. The causal susceptibilities of the amplifying medium, with negative imaginary parts in finite frequency intervals, are identified and their relationships to microscopic coupling functions are determined. By carefully relating the two-point functions of the field theory to the optical Green functions, we calculate the Casimir energy and Casimir forces for a multilayer magnetodielectric medium with both gain and loss. We point out the essential differences with a purely passive layered medium. For a single layer, we find different bounds on the Casimir force for fully amplifying and for lossy media. The force is attractive in both cases, even if the medium exhibits negative refraction. From our Lagrangian we also derive by canonical quantization the postulates of the phenomenological theory of amplifying magnetodielectrics.

Amooghorban, Ehsan [Department of Photonics Engineering, Technical University of Denmark, DK-2800 Kongens. Lyngby (Denmark); Department of Physics, University of Isfahan, Hezar Jarib Avenue, Isfahan (Iran, Islamic Republic of); Wubs, Martijn; Mortensen, N. Asger [Department of Photonics Engineering, Technical University of Denmark, DK-2800 Kongens. Lyngby (Denmark); Kheirandish, Fardin [Department of Physics, University of Isfahan, Hezar Jarib Avenue, Isfahan (Iran, Islamic Republic of)

2011-07-15T23:59:59.000Z

383

Dry matter losses during hay production and storage of sweet sorghum used for methane production  

SciTech Connect

Losses from production and storage of large round hay bales from sweet sorghum were measured. Dry matter losses from hay production were 55.3%. Storage losses were 18.1% and 10.1% for outdoor and indoor storage, respectively. It was concluded hay storage of sweet sorghum used for anaerobic digestion is not a viable option.

Coble, C.G.; Egg, R.

1987-01-01T23:59:59.000Z

384

BOOSTER GOLD BEAM INJECTION EFFICIENCY AND BEAM LOSS  

SciTech Connect

The Relativistic Heavy Ion Collider (RHIC) at the BNL requires the AGS to provide Gold beam with the intensity of 10{sup 9} ions per bunch. Over the years, the Tandem Van de Graaff has provided steadily increasing intensity of gold ion beams to the AGS Booster. However, the gold beam injection efficiency at the Booster has been found to decrease with the rising intensity of injected beams. As the result, for Tandem beams of the highest intensity, the Booster late intensity is lower than with slightly lower intensity Tandem beam. In this article, the authors present two experiments associated with the Booster injection efficiency and beam intensity. One experiment looks at the Booster injection efficiency by adjusting the Tandem beam intensity, and another looks at the beam life time while scraping the beam in the Booster. The studies suggest that the gold beam injection efficiency at the AGS Booster is related to the beam loss in the ring, rather than the intensity of injected beam or circulating beam. A close look at the effect of the lost gold ion at the Booster injection leads to the prediction that the lost gold ion creates large number of positive ions, and even larger number of electrons. The lost gold beam is also expected to create large numbers of neutral particles. In 1998 heavy ion run, the production of positive ions and electrons due to the lost gold beam has been observed. Also the high vacuum pressure due to the beam loss, presumably because of the neutral particles it created, has been measured. These results will be reported elsewhere.

ZHANG,S.Y.; AHRENS,L.A.

1998-06-22T23:59:59.000Z

385

White LED with High Package Extraction Efficiency  

Office of Scientific and Technical Information (OSTI)

WHITE LED WITH HIGH PACKAGE WHITE LED WITH HIGH PACKAGE EXTRACTION EFFICIENCY Final Report Report Period Start Date: 10/01/2006 Report Period End Date: 09/30/2008 Authors: Yi Zheng and Matthew Stough Report Submission Date: November 2008 DOE Award Number: DE-FC26-06NT42935 Project Manager: Ryan Egidi OSRAM SYLVANIA Product Inc Central Research and Service Laboratory 71 Cherry Hill Dr., Beverly, MA 01915 2 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor an agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus,

386

Numerical simulation of magma energy extraction  

DOE Green Energy (OSTI)

The Magma Energy Program is a speculative endeavor regarding practical utility of electrical power production from the thermal energy which reside in magma. The systematic investigation has identified an number of research areas which have application to the utilization of magma energy and to the field of geothermal energy. Eight topics were identified which involve thermal processes and which are areas for the application of the techniques of numerical simulation. These areas are: (1) two-phase flow of the working fluid in the wellbore, (2) thermodynamic cycles for the production of electrical power, (3) optimization of the entire system, (4) solidification and fracturing of the magma caused by the energy extraction process, (5) heat transfer and fluid flow within an open, direct-contact, heat-exchanger, (6) thermal convection in the overlying geothermal region, (7) thermal convection within the magma body, and (8) induced natural convection near the thermal energy extraction device. Modeling issues have been identified which will require systematic investigation in order to develop the most appropriate strategies for numerical simulation. It appears that numerical simulations will be of ever increasing importance to the study of geothermal processes as the size and complexity of the systems of interest increase. It is anticipated that, in the future, greater emphasis will be placed on the numerical simulation of large-scale, three-dimensional, transient, mixed convection in viscous flows and porous media. Increased computational capabilities, e.g.; massively parallel computers, will allow for the detailed study of specific processes in fractured media, non-Darcy effects in porous media, and non-Newtonian effects. 23 refs., 13 figs., 1 tab.

Hickox, C.E.

1991-01-01T23:59:59.000Z

387

Extracting value from coal mine methane  

Science Conference Proceedings (OSTI)

Emerging US policy to regulate greenhouse gas (GHG) emissions through a cap-and-trade program presents mine managers with a new opportunity to explore and develop methane utilization or abatement projects that generate value from the anodization of carbon offset credits. In addition, the rising focus on US energy security and domestic energy supply is promoting mine managers and engineers to give further consideration to the importance of their methane gas by-products. The market through which coal mine methane offset projects can be developed and carbon offset credits monetized is quickly maturing. While many methane utilization projects have previously been uneconomical, the carbon offset credit market provides a new set of financing tools for mine engineers to capitalize these projects today. Currently , there are two certification programs that have approved project protocols for CMM projects. The Voluntary Carbon Standard (VCS) offers a methodology approved under the Clean Development Mechanism, the international compliance based offset market under the Kyoto Protocol. The VCS protocol is applicable to projects that combust ventilation air methane (VAM) and methane extracted from pre-and post-mine drainage systems. The Chicago Climate Exchange (CCX), which operates a voluntary yet binding cap-and-trade market, also has an approved protocol for CMM projects. CCX's protocol can be applied to projects combusting VAM, and methane extracted from pre-and-post-mine drainage systems, as well as abandoned mines. The article describes two case studies - Developing a gob gas utilization project financed by carbon offset credits and First VAM oxidation system to be commissioned at an operating mine in the US. 1 tab., 4 photos.

Liebert, B. [Verdao Group (United States)

2009-06-15T23:59:59.000Z

388

A combined cesium-strontium extraction/recovery process  

SciTech Connect

A new solvent extraction process for the simultaneous extraction of cesium and strontium from acidic nitrate media is described. This process uses a solvent formulation comprised of 0.05 M di-t-butylcyclohexano-18-crown-6 (DtBuCH18C6), 0.1 M Crown 100{prime} (a proprietary, cesium-selective derivative of dibenzo-18-crown-6), 1.2 M tributyl phosphate (TBP), and 5% (v/v) lauryl nitrile in an isoparaffinic hydrocarbon diluent. Distribution ratios for cesium and strontium from 4 M nitric acid are 4.13 and 3.46, respectively. A benchtop batch countercurrent extraction experiment indicates that >98% of the cesium and strontium initially present in the feed solution can be removed in only four extraction stages. Through proper choice of extraction and strip conditions, extracted cesium and strontium can be recovered either together or individually.

Horwitz, E.P.; Dietz, M.L.; Jensen, M.P.

1996-03-01T23:59:59.000Z

389

Ion orbit loss and the poloidal electric field in a tokamak  

SciTech Connect

Monte Carlo simulation studies for ion orbit loss in limiter tokamaks show a poloidal asymmetry in ion loss arising from differences in ion orbit geometry. Since electron loss to the limiter is uniformly distributed because of its tiny orbit width, the nonuniform ion loss could cause a poloidal electric field that would tend to make the ion loss to the limiter more uniform. A simple analytical derivation of this poloidal electric field and a discussion of its effects ion movement and transport are also presented.

Xiao, H.; Hazeltine, R.D.; Valanju, P.M.

1994-07-29T23:59:59.000Z

390

Oblique inlet pressure loss for swirling flow entering a catalyst substrate  

Science Conference Proceedings (OSTI)

This experimental study investigates the oblique inlet pressure loss for the entry of an annular swirling flow into an automotive catalyst substrate. The results are applicable to a wide range of compact heat exchangers. For zero swirl, the total pressure loss agrees with established expressions for pressure loss in developing laminar flow in parallel channels with finite wall thickness. For positive swirl, the additional pressure loss due to oblique flow entry is correlated to the tangential velocity upstream of the catalyst, measured using laser-Doppler anemometry. The obtained oblique inlet pressure loss correlation can improve the accuracy of numerical calculations of the flow distribution in catalysts. (author)

Persoons, T.; Vanierschot, M.; Van den Bulck, E. [Katholieke Universiteit Leuven, Department of Mechanical Engineering, Celestijnenlaan 300A, B-3001 Leuven (Belgium)

2008-05-15T23:59:59.000Z

391

INCREASED UNDERSTANDING OF BEAM LOSSES FROM THE SNS LINAC PROTON EXPERIMENT  

Science Conference Proceedings (OSTI)

Beam loss is a major concern for high power hadron accelerators such as the Spallation Neutron Source (SNS). An unexpected beam loss in the SNS superconducting linac (SCL) was observed during the power ramp up and early operation. Intra-beam-stripping (IBS) loss, in which interactions between H- particles within the accelerated bunch strip the outermost electron, was recently identified as a possible cause of the beam loss. A set of experiments using proton beam acceleration in the SNS linac was conducted, which supports IBS as the primary beam loss mechanism in the SNS SCL.

Aleksandrov, Alexander V [ORNL; Shishlo, Andrei P [ORNL; Plum, Michael A [ORNL; Lebedev, Valerie [FNAL; Laface, Emanuele [ESS; Galambos, John D [ORNL

2013-01-01T23:59:59.000Z

392

Extracting Operating Modes from Building Electrical Load Data: Preprint  

Science Conference Proceedings (OSTI)

Empirical techniques for characterizing electrical energy use now play a key role in reducing electricity consumption, particularly miscellaneous electrical loads, in buildings. Identifying device operating modes (mode extraction) creates a better understanding of both device and system behaviors. Using clustering to extract operating modes from electrical load data can provide valuable insights into device behavior and identify opportunities for energy savings. We present a fast and effective heuristic clustering method to identify and extract operating modes in electrical load data.

Frank, S.; Polese, L. G.; Rader, E.; Sheppy, M.; Smith, J.

2012-01-01T23:59:59.000Z

393

Solvent Extraction for the Separation into Nickel and Cobalt with ...  

Science Conference Proceedings (OSTI)

Recovery of Precious Metals from Chloride Media Using Microalgae Waste from Biofuel Extraction · Segregation Roasting of a Saprolitic Laterite Ore: An ...

394

Extraction of Titanium and Vanadium by Chloride Leach Processes  

Science Conference Proceedings (OSTI)

... extraction of vanadium from different sources such as ilmenite and oil shales. ... of Ammonium Heptamolybdate Tetrahydrate in Air and Inert Gas Atmospheres.

395

Lipid Extraction From Microalgae Using A Single Ionic Liquid ...  

... to a top phase where it is ... Wind Energy; Partners (27) Visual Patent Search; Success Stories; News; Events; Lipid Extraction From Microalgae Using A Single ...

396

Energy Crops Engineered for Increased Sugar Extraction through ...  

Energy Crops Engineered for Increased Sugar Extraction through Inhibition of snl6 Expression Lawrence Berkeley National Laboratory. Contact LBL About This ...

397

Enhanced Geothermal in Nevada: Extracting Heat From the Earth...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sites Power Marketing Administration Other Agencies You are here Home Enhanced Geothermal in Nevada: Extracting Heat From the Earth to Generate Sustainable Power Enhanced...

398

Rules and Regulations Governing Leasing for Production or Extraction...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Leasing for Production or Extraction of Oil, Gas and Other Minerals From Onshore State-Owned Lands (Mississippi) Rules and Regulations Governing Leasing for Production or...

399

Changes in Cell Wall Carbohydrate Extractability Are Correlated...  

NLE Websites -- All DOE Office Websites (Extended Search)

Short Communication Changes in Cell Wall Carbohydrate Extractability Are Correlated with Reduced Recalcitrance of HCT Downregulated Alfalfa Biomass Sivakumar Pattathil, 1 Trina...

400

Optimal Control of Vapor Extraction of Heavy Oil.  

E-Print Network (OSTI)

??Vapor extraction (Vapex) process is an emerging technology for viscous oil recovery that has gained much attention in the oil industry. However, the oil production… (more)

Muhamad, Hameed

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Extracting Alumina from Low Grade Bauxite with Ammonium ...  

Science Conference Proceedings (OSTI)

The alumina extracted rate can be about 82% to process low grade gibbsite from Indonesia. Proceedings Inclusion? Planned: Light Metals Volume ...

402

Technologies for Extracting Valuable Metals and Compounds from...  

Open Energy Info (EERE)

Project Jump to: navigation, search Last modified on July 22, 2011. Project Title Technologies for Extracting Valuable Metals and Compounds from Geothermal Fluids Project...

403

COLLOQUIUM: "The Environmental Footprint of Shale Gas Extraction...  

NLE Websites -- All DOE Office Websites (Extended Search)

4:15pm to 5:30pm Colloquia MBG Auditorium COLLOQUIUM: "The Environmental Footprint of Shale Gas Extraction and Hydraulic Fracturing" Professor Robert Jackson Duke University...

404

Green Vehicle Guide Data Extraction Tool | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Ethics Health Law Manufacturing Ocean Research Safety States Supply Chain Green Vehicle Guide Data Extraction Tool Consumer Data Apps Challenges Resources About Blogs...

405

T.: Numerical sequence extraction in handwritten incoming mail documents  

E-Print Network (OSTI)

In this communication, we propose a method for the automatic extraction of numerical fields in handwritten documents. The approach exploits the known syntactic structure of the numerical field to extract, combined with a set of contextual morphological features to find the best label to each connected component. Applying an HMM based syntactic analyzer on the overall document allows to localize/extract fields of interest. Reported results on the extraction of zip codes, phone numbers and customer codes from handwritten incoming mail documents demonstrate the interest of the proposed approach. 1.

G. Koch; L. Heutte; T. Paquet

2003-01-01T23:59:59.000Z

406

Geothermal: Sponsored by OSTI -- Extracting and Applying SV-SV...  

Office of Scientific and Technical Information (OSTI)

Extracting and Applying SV-SV Shear Modes from Vertical Vibrator Data Across Geothermal Prospects Final Report Geothermal Technologies Legacy Collection HelpFAQ | Site Map |...

407

Use of Query Concepts and Information Extraction to Improve ...  

Science Conference Proceedings (OSTI)

Page 1. Use of Query Concepts and Information Extraction to Improve Information Retrieval Effectiveness David O. Holmes M. Catherine McCabe ...

408

Microwave-assisted solvent extraction and gas chromatography ion ...  

Science Conference Proceedings (OSTI)

May 17, 2006 ... sistent organochlorine pesticides (POPs) in marine sedi- ment was ... variables microwave power, extraction time and tempera- ture, amount of ...

409

Rare Metal Extraction & Processing Symposium - Programmaster.org  

Science Conference Proceedings (OSTI)

Comparison among different extractants, as (2-ethylhexyl)-mono (2-ethylhexyl) ester Phosphonic acid (P507), Secondary-octyl phenoxy acetic acid (CA-12) and  ...

410

(ITO) Nanoparticles for Improvement of Light Extraction Efficiency  

Science Conference Proceedings (OSTI)

For making the most enhancement of light extraction efficiency and applying into ... of Powder-based Metals via Current Activated Tip-Based Sintering (CATS).

411

Matrix Studies on Solvent Extraction of Zirconium and Hafnium from ...  

Science Conference Proceedings (OSTI)

Sorption of Se(IV) and Se(VI) Ions onto Biomass Ash ... Tellurium Supply Sensitivity to Growth of Non-Traditional Copper Extraction Techniques - Implications for ...

412

Source fabrication and lifetime for Li{sup +} ion beams extracted from alumino-silicate sources  

SciTech Connect

A space-charge-limited beam with current densities (J) exceeding 1 mA/cm{sup 2} have been measured from lithium alumino-silicate ion sources at a temperature of {approx}1275 deg. C. At higher extraction voltages, the source appears to become emission limited with J{>=} 1.5 mA/cm{sup 2}, and J increases weakly with the applied voltage. A 6.35 mm diameter source with an alumino-silicate coating, {<=}0.25 mm thick, has a measured lifetime of {approx}40 h at {approx}1275 deg. C, when pulsed at 0.05 Hz and with pulse length of {approx}6 {mu}s each. At this rate, the source lifetime was independent of the actual beam charge extracted due to the loss of neutral atoms at high temperature. The source lifetime increases with the amount of alumino-silicate coated on the emitting surface, and may also be further extended if the temperature is reduced between pulses.

Roy, Prabir K.; Greenway, Wayne G.; Kwan, Joe W. [Lawrence Berkeley National Laboratory (LBNL), One Cyclotron Road, Berkeley, California 94720 (United States)

2012-04-15T23:59:59.000Z

413

Source fabrication and lifetime for Li+ ion beams extracted from alumino-silicate sources  

Science Conference Proceedings (OSTI)

A space-charge-limited beam with current densities (J) exceeding 1 mA/cm{sup 2} have been measured from lithium alumino-silicate ion sources at a temperature of #24;~1275#14;{degrees} C. At higher extraction voltages, the source appears to become emission limited with J #21;{>=} 1.5 mA/cm{sup 2}, and J increases weakly with the applied voltage. A 6.35 mm diameter source with an alumino-silicate coating, {<=}#20;0.25 mm thick, has a measured lifetime of ~#24;40 hours at ~#24;1275#14;{degrees} C, when pulsed at 0.05 Hz and with pulse length of #24;~6 ?s each. At this rate, the source lifetime was independent of the actual beam charge extracted due to the loss of neutral atoms at high temperature. The source lifetime increases with the amount of alumino-silicate coated on the emitting surface, and may also be further extended if the temperature is reduced between pulses.

Roy, Prabir K.; Greenway, Wayne G.; Kwan, Joe W

2012-03-05T23:59:59.000Z

414

Source fabrication and lifetime for Li+ ion beams extracted from alumino-silicate sources  

SciTech Connect

A space-charge-limited beam with current densities (J) exceeding 1 mA/cm{sup 2} have been measured from lithium alumino-silicate ion sources at a temperature of #24;~1275#14;{degrees} C. At higher extraction voltages, the source appears to become emission limited with J #21;{>=} 1.5 mA/cm{sup 2}, and J increases weakly with the applied voltage. A 6.35 mm diameter source with an alumino-silicate coating, {<=}#20;0.25 mm thick, has a measured lifetime of ~#24;40 hours at ~#24;1275#14;{degrees} C, when pulsed at 0.05 Hz and with pulse length of #24;~6 μs each. At this rate, the source lifetime was independent of the actual beam charge extracted due to the loss of neutral atoms at high temperature. The source lifetime increases with the amount of alumino-silicate coated on the emitting surface, and may also be further extended if the temperature is reduced between pulses.

Roy, Prabir K.; Greenway, Wayne G.; Kwan, Joe W

2012-03-05T23:59:59.000Z

415

Alkaline-side extraction of technetium from tank waste using crown ethers and other extractants  

SciTech Connect

The chemical development of a new crown-ether-based solvent-extraction process for the separation of (Tc) from alkaline tank-waste supernate is ready for counter-current testing. The process addresses a priority need in the proposed cleanup of Hanford and other tank wastes. This need has arisen from concerns due to the volatility of Tc during vitrification, as well as {sup 99}Tc`s long half-life and environmental mobility. The new process offers several key advantages that direct treatability--no adjustment of the waste composition is needed; economical stripping with water; high efficiency--few stages needed; non-RCRA chemicals--no generation of hazardous or mixed wastes; co-extraction of {sup 90}Sr; and optional concentration on a resin. A key concept advanced in this work entails the use of tandem techniques: solvent extraction offers high selectivity, while a subsequent column sorption process on the aqueous stripping solution serves to greatly concentrate the Tc. Optionally, the stripping solution can be evaporated to a small volume. Batch tests of the solvent-extraction and stripping components of the process have been conducted on actual melton Valley Storage Tank (MVST) waste as well as simulants of MVST and Hanford waste. The tandem process was demonstrated on MVST waste simulants using the three solvents that were selected the final candidates for the process. The solvents are 0.04 M bis-4,4{prime}(5{prime})[(tert-butyl)cyclohexano]-18-crown-6 (abbreviated di-t-BuCH18C6) in a 1:1 vol/vol blend of tributyl phosphate and Isopar{reg_sign} M (an isoparaffinic kerosene); 0.02 M di-t-BuCH18C6 in 2:1 vol/vol TBP/Isopar M and pure TBP. The process is now ready for counter-current testing on actual Hanford tank supernates.

Bonnesen, P.V.; Moyer, B.A.; Presley, D.J.; Armstrong, V.S.; Haverlock, T.J.; Counce, R.M.; Sachleben, R.A.

1996-06-01T23:59:59.000Z

416

DIVERSITY OF LUMINOUS SUPERNOVAE FROM NON-STEADY MASS LOSS  

Science Conference Proceedings (OSTI)

We show that the diversity in the density slope of the dense wind due to non-steady mass loss can be one way to explain the spectral diversity of Type II luminous supernovae (LSNe). The interaction of SN ejecta and wind surrounding it is considered to be a power source to illuminate LSNe because many LSNe show the wind signature in their spectra (Type IIn LSNe). However, there also exist LSNe without the spectral features caused by the wind (Type IIL LSNe). We show that, even if LSNe are illuminated by the interaction, it is possible that they do not show the narrow spectra from the wind if we take into account the non-steady mass loss of their progenitors. When the shock breakout takes place in a dense wind with the density structure {rho}{proportional_to}r{sup -w}, the ratio of the diffusion timescale in the optically thick region of the wind (t{sub d} ) and the shock propagation timescale of the entire wind after the shock breakout (t{sub s} ) strongly depends on w. For the case w {approx}< 1, both timescales are comparable (t{sub d} /t{sub s} {approx_equal} 1) and t{sub d} /t{sub s} gets smaller as w gets larger. For the case t{sub d} /t{sub s} {approx_equal} 1, the shock goes through the entire wind just after the light-curve (LC) peak, and narrow spectral lines from the wind cannot be observed after the LC peak (Type IIL LSNe). If t{sub d} /t{sub s} is much smaller, the shock wave continues to propagate in the wind after the LC peak, and unshocked wind remains (Type IIn LSNe). This difference can be obtained only through careful treatment of the shock breakout condition in a dense wind. The lack of narrow Lorentzian line profiles in Type IIL LSNe before the LC peak can also be explained by the difference in the density slope. Furthermore, we apply our model to Type IIn LSN 2006gy and Type IIL LSN 2008es and find that our model is consistent with the observations.

Moriya, Takashi J.; Tominaga, Nozomu, E-mail: takashi.moriya@ipmu.jp [Institute for the Physics and Mathematics of the Universe, Todai Institutes for Advanced Study, University of Tokyo, Kashiwanoha 5-1-5, Kashiwa, Chiba 277-8583 (Japan)

2012-03-10T23:59:59.000Z

417

Toxicity characteristic leaching procedure fails to extract oxoanion-forming elements that are extracted by municipal solid waste leachates  

Science Conference Proceedings (OSTI)

US EPA and state regulatory agencies rely on standard extraction tests to identify wastes that have the potential to contaminate surface water or groundwater. To evaluate the predictive abilities of these extraction tests, the Toxicity Characteristic Leaching Procedure (TCLP), the Waste Extraction Test (WET), and the Synthetic Precipitation Leaching Procedure (SPLP) were compared with actual municipal solid waste leachates (MSWLs) for their ability to extract regulated elements from a variety of industrial solid wastes in short- and long-term extractions. Short-term extractions used MSWLs from a variety of California landfills. Long-term sequential extractions simulated longer term leaching, as might occur in MSW landfills. For most regulated elements, the TCLP roughly predicted the maximum concentrations extracted by the MSWLs. For regulated elements that form oxoanions (e.g., Sb, As, Mo, Se, V), however the TCLP underpredicted the levels extracted by the MSWL. None of the standard tests adequately predicted these levels. The results emphasize the need for better standardized techniques to identify wastes that have the potential to contaminate groundwater with oxoanion-forming elements, particularly arsenic.

Hooper, K.; Iskander, M.; Sivia, G. [California Dept. of Toxic Substances Control, Berkeley, CA (United States). Hazardous Materials Lab.] [and others

1998-12-01T23:59:59.000Z

418

Booster gold beam injection efficiency and beam loss  

SciTech Connect

The Relativistic Heavy Ion Collider (RHIC) at the BNL requires the AGS to provide gold beam with the intensity of 10{sup 9} ions per bunch. Over the years, the Tandem Van de Graaff has provided steadily increasing intensity of gold ion beams to the AGS Booster. However, the gold ion beam injection efficiency at the Booster has been found to decrease with the rising intensity of injected beams. As the result, for Tandem beams of the highest intensity, the Booster late intensity is lower than with slightly lower intensity Tandem beam. In this article, the authors present two experiments associated with the Booster injection efficiency and beam intensity. One experiment looks at the Booster injection efficiency by adjusting the Tandem beam intensity, and another looks at the beam life time while scraping the beam in the Booster. The studies suggest that the gold beam injection efficiency at the AGS Booster is related to the beam loss in the ring, rather than the intensity of injected beam or circulating beam.

Zhang, S.Y.; Ahrens, L.A.

1998-08-01T23:59:59.000Z

419

Plant View On Reducing Steam Trap Energy Loss  

E-Print Network (OSTI)

Energy will continue to be an ever increasingly important factor in the cost of doing business in the decade of the 80' s. In many petrochemical industries, energy is the second most costly item in producing a product. About 36% of our nation's total energy consumption is used by industry in producing the goods which are consumed around the world. Steam is the most commonly used energy source for the petrochemical industry. Most of this steam is used for heating and evaporating the many petrochemical liquids. This steam is then condensed and is removed from the system at the same rate as it is being formed or the loss of heat transfer will result. From a cost standpoint only condensate should be allowed through the trap. But at many plants half of the steam traps are passing excess steam. This is caused by neglect of aged steam traps which have worn out and misapplication of steam traps by oversizing or using the 'wrong' type trap. Elimination of steam wastes by an effective well engineered steam trap program is what is covered by this article.

Vallery, S. J.

1982-01-01T23:59:59.000Z

420

Lightweighting Impacts on Fuel Economy, Cost, and Component Losses  

DOE Green Energy (OSTI)

The Future Automotive Systems Technology Simulator (FASTSim) is the U.S. Department of Energy's high-level vehicle powertrain model developed at the National Renewable Energy Laboratory. It uses a time versus speed drive cycle to estimate the powertrain forces required to meet the cycle. It simulates the major vehicle powertrain components and their losses. It includes a cost model based on component sizing and fuel prices. FASTSim simulated different levels of lightweighting for four different powertrains: a conventional gasoline engine vehicle, a hybrid electric vehicle (HEV), a plug-in hybrid electric vehicle (PHEV), and a battery electric vehicle (EV). Weight reductions impacted the conventional vehicle's efficiency more than the HEV, PHEV and EV. Although lightweighting impacted the advanced vehicles' efficiency less, it reduced component cost and overall costs more. The PHEV and EV are less cost effective than the conventional vehicle and HEV using current battery costs. Assuming the DOE's battery cost target of $100/kWh, however, the PHEV attained similar cost and lightweighting benefits. Generally, lightweighting was cost effective when it costs less than $6/kg of mass eliminated.

Brooker, A. D.; Ward, J.; Wang, L.

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Tropical cyclone losses in the USA and the impact of climate change - A trend analysis based on data from a new approach to adjusting storm losses  

Science Conference Proceedings (OSTI)

Economic losses caused by tropical cyclones have increased dramatically. Historical changes in losses are a result of meteorological factors (changes in the incidence of severe cyclones, whether due to natural climate variability or as a result of human activity) and socio-economic factors (increased prosperity and a greater tendency for people to settle in exposed areas). This paper aims to isolate the socio-economic effects and ascertain the potential impact of climate change on this trend. Storm losses for the period 1950-2005 have been adjusted to the value of capital stock in 2005 so that any remaining trend cannot be ascribed to socio-economic developments. For this, we introduce a new approach to adjusting losses based on the change in capital stock at risk. Storm losses are mainly determined by the intensity of the storm and the material assets, such as property and infrastructure, located in the region affected. We therefore adjust the losses to exclude increases in the capital stock of the affected region. No trend is found for the period 1950-2005 as a whole. In the period 1971-2005, since the beginning of a trend towards increased intense cyclone activity, losses excluding socio-economic effects show an annual increase of 4% per annum. This increase must therefore be at least due to the impact of natural climate variability but, more likely than not, also due to anthropogenic forcings.

Schmidt, Silvio, E-mail: sischmidt@munichre.co [Humboldt Universitaet zu Berlin, c/o Munich Reinsurance Company, Koeniginstr. 107, 80802 Munich (Germany); Kemfert, Claudia, E-mail: ckemfert@diw.d [German Institute of Economic Research and Humboldt Universitaet zu Berlin, Mohrenstr. 58, 10117 Berlin (Germany); Hoeppe, Peter, E-mail: phoeppe@munichre.co [Munich Reinsurance Company, Koeniginstr. 107, 80802 Munich (Germany)

2009-11-15T23:59:59.000Z

422

Method of underground mining by pillar extraction  

SciTech Connect

A method of sublevel caving and pillar and top coal extraction for mining thick coal seams includes the advance mining of rooms and crosscuts along the bottom of a seam to a height of about eight feet, and the retreat mining of the top coal from the rooms, crosscuts and portions of the pillars remaining from formation of the rooms and cross-cuts. In the retreat mining, a pocket is formed in a pillar, the top coal above the pocket is drilled, charged and shot, and then the fallen coal is loaded by a continuous miner so that the operator remains under a roof which has not been shot. The top coal from that portion of the room adjacent the pocket is then mined, and another pocket is formed in the pillar. The top coal above the second pocket is mined followed by the mining of the top coal of that portion of the room adjacent the second pocket, all by use of a continuous miner which allows the operator to remain under a roof portion which has not been shot.

Bowen, Ray J. (1879 Delann, Salt Lake City, UT 84121); Bowen, William R. (1636 Sunnydale La., Salt Lake City, UT 84108)

1980-08-12T23:59:59.000Z

423

Coupling Measurements in ATF2 Extraction Line  

SciTech Connect

The purpose of ATF2 is to deliver a beam with stable very small spotsizes as required for future linear colliders such as ILC or CLIC. To achieve that, precise controls of aberrations such as dispersion and coupling are necessary. Theoretically, the complete reconstruction of the beam matrix is possible from the measurements of horizontal, vertical and tilted beam sizes, combining skew quadrupole scans at several wire-scanner positions. Such measurements were performed in the extraction line (EXT) of ATF2 in May 2009. We present analysis results attempting to resolve the 4 x 4 beam matrix. We aimed to reconstruct the full beam matrix using only skew quadrupole scans at different EXT wire-scanner locations, with measurements of horizontal, vertical and two tilted beam size projections. Checking the coherence of the {sigma}{sub 13} reconstruction from the {sigma}{sub 80{sup o}} and the {sigma}{sub 100{sup o}} measurements was essential to perform this analysis. We have shown that reconstruction of the coupling element can not be performed independantly of the 4 x 4 diagonal ones since it leads to unphysical results. A more accurate and automatisable method was find, leading to physical beam matrix reconstruction, compatible with the measurements. Another analysis should be performed based on a larger number of data sets to minimise statistical errors.

Rimbault, Cecile; /Orsay, LAL; Kuroda, Shigeru; /KEK, Tsukuba; Tauchi, Toshiaki; /KEK, Tsukuba; Terunuma, Nobuhiro; /KEK, Tsukuba; White, Glen; /SLAC; Woodley, Mark; /SLAC

2012-06-29T23:59:59.000Z

424

Algal Lipid Extraction and Upgrading to Hydrocarbons Technology Pathway  

DOE Green Energy (OSTI)

This technology pathway case investigates the cultivation of algal biomass followed by further lipid extraction and upgrading to hydrocarbon biofuels. Technical barriers and key research needs have been assessed in order for the algal lipid extraction and upgrading pathway to be competitive with petroleum-derived gasoline-, diesel-, and jet-range hydrocarbon blendstocks.

Davis, R.; Biddy, M.; Jones, S.

2013-03-01T23:59:59.000Z

425

Computer Hard Drive Geolocation by HTTP Feature Extraction  

E-Print Network (OSTI)

files of a set of computers acquired in China, part of a larger research data set of real user data [10Computer Hard Drive Geolocation by HTTP Feature Extraction Technical Report UCSC-SSRC-12-04 May://www.ssrc.ucsc.edu/ #12;Computer Hard Drive Geolocation by HTTP Feature Extraction Ziqian Wan Sichuan University Alex J

Miller, Ethan L.

426

Feature Extraction Based on Maximum Nearest Subspace Margin Criterion  

Science Conference Proceedings (OSTI)

Based on the classification rule of sparse representation-based classification (SRC) and linear regression classification (LRC), we propose the maximum nearest subspace margin criterion for feature extraction. The proposed method can be seen as a preprocessing ... Keywords: Dimensionality reduction, Face recognition, Feature extraction, Finger knuckle print recognition, Linear regression classification

Yi Chen; Zhenzhen Li; Zhong Jin

2013-06-01T23:59:59.000Z

427

Learning to extract coherent keyphrases from online news  

Science Conference Proceedings (OSTI)

Keyphrases extracted from news articles can be used to concisely represent the main content of news events. In this paper, we first present several criteria of high-quality news keyphrases. After that, in order to integrate those criteria into the keyphrase ... Keywords: keyphrase extraction, learning to rank, support vector machine

Zhuoye Ding; Qi Zhang; Xuanjing Huang

2011-12-01T23:59:59.000Z

428

Classification of raster maps for automatic feature extraction  

Science Conference Proceedings (OSTI)

Raster maps are widely available and contain useful geographic features such as labels and road lines. To extract the geographic features, most research work relies on a manual step to first extract the foreground pixels from the maps using the distinctive ... Keywords: color histogram, color moments, color-coherence vectors, content-based image retrieval, image similarity, luminance-boundary histogram, raster map classification

Yao-Yi Chiang; Craig A. Knoblock

2009-11-01T23:59:59.000Z

429

Extraction of signals with higher order temporal structure using Correntropy  

Science Conference Proceedings (OSTI)

This paper addresses the problem of semi-blindly extracting one single desired signal using a priori information about its higher order temporal structure. Our approach is based on the maximization of the autocorrentropy function for a given time delay. ... Keywords: Blind source extraction, Correntropy, Information Theoretic Learning (ITL)

Eder Santana; Jose C. Principe; Ewaldo Santana; Allan Kardec Barros

2012-08-01T23:59:59.000Z

430

Method for extracting copper, silver and related metals  

DOE Patents (OSTI)

A process for selectively extracting precious metals such as silver and gold concurrent with copper extraction from aqueous solutions containing the same. The process utilizes tetrathiamacrocycles and high molecular weight organic acids that exhibit a synergistic relationship when complexing with certain metal ions thereby removing them from ore leach solutions.

Moyer, B.A.; McDowell, W.J.

1987-10-23T23:59:59.000Z

431

Extracting redundancy-aware top-k patterns  

Science Conference Proceedings (OSTI)

Observed in many applications, there is a potential need of extracting a small set of frequent patterns having not only high significance but also low redundancy. The significance is usually defined by the context of applications. Previous studies have ... Keywords: pattern extraction, redundancy, significance

Dong Xin; Hong Cheng; Xifeng Yan; Jiawei Han

2006-08-01T23:59:59.000Z

432

Using solvent extraction to process nitrate anion exchange column effluents  

SciTech Connect

Octyl(phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide (CMPO), a new organophosphorous extractant, and a new centrifugal mixer-settler both recently developed at Argonne were evaluated for their potential use in the recovery of actinides from nitrate anion exchange column effluents. The performance of the extractant was evaluated by measuring the extraction coefficient values as a function of acid and salt concentration. Additional performance parameters include extraction coefficient behavior as a function of the total metal concentration in the organic phase, and comparison of different stripping and organic scrubbing techniques. A simulated effluent stream was used to evaluate the performance of the centrifugal mixer-settlers by comparing experimental and calculated interstage concentration profiles. Both the CMPO extractant and the centrifugal mixer-settlers have potential for processing nitrate column effluents, particularly if the stripping behavior can be improved. Details of the proposed process are presented in the flowsheet and contactor design analyses.

Yarbro, S.L.

1987-10-01T23:59:59.000Z

433

Studies of the thermodynamics of extraction f-elements.  

SciTech Connect

Though they were discovered in the 18th century, practical applications of individual lanthanides were not possible until the development of first ion exchange and later solvent extraction techniques. Today, solvent extraction using lipophilic organophosphorus complexants is the principal separation technique applied for lanthanide production by hydrometallurgy. Separations chemistry (coprecipitation, ion exchange, and solvent extraction) also was central to both the discovery of the individual actinides and to the preparation of samples of sufficient purity to allow elucidation of their chemical/physical properties. Solvent extraction, in the form of the PUREX process, has become the single most important separations process in actinide technology. In this report, the basic thermodynamics of extraction of actinide and lanthanide metal ions is discussed.

Nash, K. L.

1998-12-07T23:59:59.000Z

434

An analysis method for transmission measurements of superconducting resonators with applications to quantum-regime dielectric-loss measurements  

E-Print Network (OSTI)

Superconducting resonators provide a convenient way to measure loss tangents of various dielectrics at low temperature. For the purpose of examining the microscopic loss mechanisms in dielectrics, precise measurements of the internal quality factor at different values of energy stored in the resonators are required. Here, we present a consistent method to analyze a LC superconducting resonator coupled to a transmission line. We first derive an approximate expression for the transmission S-parameter $S_{21}$ based on a complete circuit model. In the weak coupling limit, we show that the internal quality factor is reliably determined by fitting the approximate form of $S_{21}$. Since the voltage $V$ of the capacitor of the LC circuit is required to determine the energy stored in the resonator, we next calculate the relation between $V$ and the forward propagating wave voltage $V_{in}^+$. Due to the dependence of the quality factor on voltage, $V$ is not simply proportional to $V_{in}^+$. We find a self-consistent way to determine the relation between $V$ and $V_{in}^+$, which employs only the fitting parameters for $S_{21}$ and a linear scaling factor. We then examine the resonator transmission in the cases of port reflection and impedance mismatch. We find that resonator transmission asymmetry is primarily due to the reflection from discontinuity in transmission lines. We show that our analysis method to extract the internal quality factor is robust in the non-ideal cases above. Finally, we show that the analysis method on LC resonator can be generalize to arbitrary weakly coupled lumped and distributed resonators. The generalization uses a systematic approximation on the response function based on the pole and zero which are the closest to the resonance frequency. This Closest Pole and Zero Method (CPZM) is a valuable tool for analyzing physical measurements of high-Q resonators.

Chunqing Deng; Martin Otto; Adrian Lupascu

2013-04-16T23:59:59.000Z

435

Space charge effect of the high intensity proton beam during the resonance extraction for the Mu2e experiment at Fermilab  

SciTech Connect

The proposed Mu2e experiment to search for direct {mu} {yields} e conversion at Fermilab plans slow, resonant extraction of a beam with 3 x 10{sup 12} protons from the Debuncher ring. Space charge of this high intensity beam is a critical factor, since it induces significant betatron tune spread and consequently affects resonance extraction processes, such as spill uniformity and beam losses. This study shows the multi-particle simulation results in the early stages of resonance extraction and spill uniformity in the presence of 2D and 3D space charge effects. We have presented the results of the third-integer resonance extraction in early stage for the Mu2e experiment in the presence of space charge effects. In order to track particles and to calculate self-consistent space charge effects, Synergia2 was used, which is capable of parallel computing. The space charge tune shift was computed and was reasonable value compared with the analytical calculation. Locations of the septum and Lambertson were chosen so that particles are kicked and extracted efficiently. The spill rates for with and without space charge effects were uniform, but should be improved for the early stage after the sextupole field ramping.

Park, Chong Shik; Amundson, James; Johnstone, John; Michelotti, Leo; Nagaslaev, Vladimir; Werkema, Steve; /Fermilab

2011-03-01T23:59:59.000Z

436

Reduction of Oxidative Melt Loss of Aluminum and Its Alloys  

Science Conference Proceedings (OSTI)

This project led to an improved understanding of the mechanisms of dross formation. The microstructural evolution in industrial dross samples was determined. Results suggested that dross that forms in layers with structure and composition determined by the local magnesium concentration alone. This finding is supported by fundamental studies of molten metal surfaces. X-ray photoelectron spectroscopy data revealed that only magnesium segregates to the molten aluminum alloy surface and reacts to form a growing oxide layer. X-ray diffraction techniques that were using to investigate an oxidizing molten aluminum alloy surface confirmed for the first time that magnesium oxide is the initial crystalline phase that forms during metal oxidation. The analytical techniques developed in this project are now available to investigate other molten metal surfaces. Based on the improved understanding of dross initiation, formation and growth, technology was developed to minimize melt loss. The concept is based on covering the molten metal surface with a reusable physical barrier. Tests in a laboratory-scale reverberatory furnace confirmed the results of bench-scale tests. The main highlights of the work done include: A clear understanding of the kinetics of dross formation and the effect of different alloying elements on dross formation was obtained. It was determined that the dross evolves in similar ways regardless of the aluminum alloy being melted and the results showed that amorphous aluminum nitride forms first, followed by amorphous magnesium oxide and crystalline magnesium oxide in all alloys that contain magnesium. Evaluation of the molten aluminum alloy surface during melting and holding indicated that magnesium oxide is the first crystalline phase to form during oxidation of a clean aluminum alloy surface. Based on dross evaluation and melt tests it became clear that the major contributing factor to aluminum alloy dross was in the alloys with Mg content. Mg was identified as the primary factor that accelerates dross formation specifically in the transition from two phases to three phase growth. Limiting magnesium oxidation on the surface of molten aluminum therefore becomes the key to minimizing melt loss, and technology was developed to prevent magnesium oxidation on the aluminum surface. This resulted in a lot of the work being focused on the control of Mg oxidation. Two potential molten metal covering agents that could inhibit dross formation during melting and holding consisting of boric acid and boron nitride were identified. The latter was discounted by industry as it resulted in Boron pick up by the melt beyond that allowed by specifications during plant trials. The understanding of the kinetics of dross formation by the industry partners helped them understand how temperature, alloy chemistry and furnace atmosphere (burner controls--e.g. excess air) effected dross formation. This enables them to introduce in their plant process changes that reduced unnecessary holding at high temperatures, control burner configurations, reduce door openings to avoid ingress of air and optimize charge mixes to ensure rapid melting and avoid excess oxidation.

Dr. Subodh K. Das; Shridas Ningileri

2006-03-17T23:59:59.000Z

437

Cladding embrittlement during postulated loss-of-coolant accidents.  

DOE Green Energy (OSTI)

The effect of fuel burnup on the embrittlement of various cladding alloys was examined with laboratory tests conducted under conditions relevant to loss-of-coolant accidents (LOCAs). The cladding materials tested were Zircaloy-4, Zircaloy-2, ZIRLO, M5, and E110. Tests were performed with specimens sectioned from as-fabricated cladding, from prehydrided (surrogate for high-burnup) cladding, and from high-burnup fuel rods which had been irradiated in commercial reactors. The tests were designed to determine for each cladding material the ductile-to-brittle transition as a function of steam oxidation temperature, weight gain due to oxidation, hydrogen content, pre-transient cladding thickness, and pre-transient corrosion-layer thickness. For short, defueled cladding specimens oxidized at 1000-1200 C, ring compression tests were performed to determine post-quench ductility at {le} 135 C. The effect of breakaway oxidation on embrittlement was also examined for short specimens oxidized at 800-1000 C. Among other findings, embrittlement was found to be sensitive to fabrication processes--especially surface finish--but insensitive to alloy constituents for these dilute zirconium alloys used as cladding materials. It was also demonstrated that burnup effects on embrittlement are largely due to hydrogen that is absorbed in the cladding during normal operation. Some tests were also performed with longer, fueled-and-pressurized cladding segments subjected to LOCA-relevant heating and cooling rates. Recommendations are given for types of tests that would identify LOCA conditions under which embrittlement would occur.

Billone, M.; Yan, Y.; Burtseva, T.; Daum, R.; Nuclear Engineering Division

2008-07-31T23:59:59.000Z

438

Geologic controls influencing CO2 loss from a leaking well.  

Science Conference Proceedings (OSTI)

Injection of CO2 into formations containing brine is proposed as a long-term sequestration solution. A significant obstacle to sequestration performance is the presence of existing wells providing a transport pathway out of the sequestration formation. To understand how heterogeneity impacts the leakage rate, we employ two dimensional models of the CO2 injection process into a sandstone aquifer with shale inclusions to examine the parameters controlling release through an existing well. This scenario is modeled as a constant-rate injection of super-critical CO2 into the existing formation where buoyancy effects, relative permeabilities, and capillary pressures are employed. Three geologic controls are considered: stratigraphic dip angle, shale inclusion size and shale fraction. In this study, we examine the impact of heterogeneity on the amount and timing of CO2 released through a leaky well. Sensitivity analysis is performed to classify how various geologic controls influence CO2 loss. A 'Design of Experiments' approach is used to identify the most important parameters and combinations of parameters to control CO2 migration while making efficient use of a limited number of computations. Results are used to construct a low-dimensional description of the transport scenario. The goal of this exploration is to develop a small set of parametric descriptors that can be generalized to similar scenarios. Results of this work will allow for estimation of the amount of CO2 that will be lost for a given scenario prior to commencing injection. Additionally, two-dimensional and three-dimensional simulations are compared to quantify the influence that surrounding geologic media has on the CO2 leakage rate.

Hopkins, Polly L.; Martinez, Mario J.; McKenna, Sean Andrew; Klise, Katherine A.

2010-12-01T23:59:59.000Z

439

Magnetic and electric contributions to the energy loss in a dynamical QCD medium  

E-Print Network (OSTI)

The computation of radiative energy loss in a finite size QCD medium with dynamical constituents is a key ingredient for obtaining reliable predictions for jet quenching in ultra-relativistic heavy ion collisions. It was previously shown that energy loss in dynamical QCD medium is significantly higher compared to static QCD medium. To understand this difference, we here analyze magnetic and electric contributions to energy loss in dynamical QCD medium. We find that the significantly higher energy loss in the dynamical case is entirely due to appearance of magnetic contribution in the dynamical medium. While for asymptotically high energies, the energy loss in static and dynamical medium approach the same value, we find that the physical origin of the energy loss in these two cases is different.

Magdalena Djordjevic

2011-05-21T23:59:59.000Z

440

U-008: Symantec Data Loss Prevention Bugs in KeyView Filter Lets Remote  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

08: Symantec Data Loss Prevention Bugs in KeyView Filter Lets 08: Symantec Data Loss Prevention Bugs in KeyView Filter Lets Remote Users Deny Service U-008: Symantec Data Loss Prevention Bugs in KeyView Filter Lets Remote Users Deny Service October 11, 2011 - 8:00am Addthis PROBLEM: Symantec Data Loss Prevention Bugs in KeyView Filter Lets Remote Users Deny Service PLATFORM: Symantec Data Loss Prevention Enforce/Detection Servers for Windows 10.x, 11.x ABSTRACT: A remote user can create a file that, when processed by the target filter, will cause partial denial of service conditions. reference LINKS: Symantec Security Advisory SYM11-013 SecurityTracker Alert ID: 1026157 IMPACT ASSESSMENT: Medium Discussion: Multiple vulnerabilities were reported in Symantec Data Loss Prevention. A remote user can cause denial of service conditions on the target system.A

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Oscillating flow loss test results in Stirling engine heat exchangers. Final Report  

SciTech Connect

The results are presented for a test program designed to generate a database of oscillating flow loss information that is applicable to Stirling engine heat exchangers. The tests were performed on heater/cooler tubes of various lengths and entrance/exit configurations, on stacked and sintered screen regenerators of various wire diameters and on Brunswick and Metex random fiber regenerators. The test results were performed over a range of oscillating flow parameters consistent with Stirling engine heat exchanger experience. The tests were performed on the Sunpower oscillating flow loss rig which is based on a variable stroke and variable frequency linear drive motor. In general, the results are presented by comparing the measured oscillating flow losses to the calculated flow losses. The calculated losses are based on the cycle integration of steady flow friction factors and entrance/exit loss coefficients.

Koester, G.; Howell, S.; Wood, G.; Miller, E.; Gedeon, D.

1990-05-01T23:59:59.000Z

442

Beam Loss due to Foil Scattering in the SNS Accumulator Ring  

Science Conference Proceedings (OSTI)

In order to better understand the contribution of scattering from the primary stripper foil to losses in the SNS ring, we have carried out calculations using the ORBIT Code aimed at evaluating these losses. These calculations indicate that the probability of beam loss within one turn following a foil hit is ~1.8 10-8 , where is the foil thickness in g/cm2, assuming a carbon foil. Thus, for a typical SNS stripper foil of thickness = 390 g/cm2, the probability of loss within one turn of a foil hit is ~7.0 10-6. This note describes the calculations used to arrive at this result, presents the distribution of these losses around the SNS ring, and compares the calculated results with observed ring losses for a well-tuned production beam.

Holmes, Jeffrey A [ORNL; Plum, Michael A [ORNL

2012-01-01T23:59:59.000Z

443

Solvent extraction of Southern US tar sands  

SciTech Connect

The Department of Chemical Engineering at the University of Arkansas, in association with Diversified Petroleum Recovery, Inc. (DPR) of Little Rock, Arkansas, has been developing a solvent extraction process for the recovery of bitumen from tar sands for the past five years. The unique feature of the process is that the bitumen is recovered from the solvent by contacting with a co-solvent, which causes the bitumen to precipitate. The overall purpose of this project is to study both the technical and economic feasibility of applying this technology for recovery of bitumen from tar sands by (1) investigating the socioeconmic factors which affect (a) plant siting and (b) the market value of recovered bitumen; (2) operating a process demonstration unit at the rate of 1 lb/hr recovered bitumen while producing clean sand and recyclable solvents; and (3) determine the economic conditions which will make a bitumen recovery project economical. DPR has analyzed the historical trends of domestic production, consumption, discoveries and reserves of crude oil. They have started an investigation of the volatility in the price of crude oil and of gasoline prices and of the differential between gasoline and crude oil. DPR continues to analyze the geographical movement and demand for asphalt products. Utah does not appear economically attractive as a site for a bitumen from tar sands asphalt plant. Oklahoma sites are now being studied. This report also contains the quarterly progress report from a University of Nevada study to determine bitumen composition, oxygen uptake rates, and viscosities of Alabama and Utah bitumens. Both reports have been indexed separately for inclusion on the data base.

Penney, W.R.

1990-01-01T23:59:59.000Z

444

Direct Biohydrometallurgical Extraction of Iron from Ore  

Science Conference Proceedings (OSTI)

A completely novel approach to iron extraction was investigated, based on reductive leaching of iron by anaerobic bacteria. Microorganisms were collected from an anaerobic bog where natural seepage of dissolved iron was observed. This mixed culture was used to reduce insoluble iron in a magnetite ore to the soluble ferrous (Fe{sup +2}) state. While dissolution rates were slow, concentrations of dissolved iron as high as 3487 mg/l could be reached if sufficient time was allowed. A factorial study of the effects of trace nutrients and different forms of organic matter indicated that the best dissolution rates and highest dissolved iron concentrations were achieved using soluble carbohydrate (sucrose) as the bacterial food source, and that nutrients other than nitrogen, phosphorus, potassium, sodium, and acetate were not necessary. A key factor in reaching high levels of dissolved iron was maintaining a high level of carbon dioxide in solution, since the solubility of iron carbonates increases markedly as the quantity of dissolved carbon dioxide increases. Once the iron is dissolved, it has been demonstrated that the ferrous iron can then be electroplated from solution, provided that the concentration of iron is sufficiently high and the hydrogen ion concentration is sufficiently low. However, if the leaching solution is electrolyzed directly, organic matter precipitates at the cathode along with the metallic iron. To prevent this problem, the ferrous iron should be separated from the bulk solution in a more concentrated, purified form. One route to accomplishing this is to take advantage of the change in solubility of ferrous iron as a function of carbon dioxide concentration. By cycling the concentration of carbon dioxide in solution, it is possible to produce an iron-rich concentrate that should be suitable for electrolysis. This represents the first viable hydrometallurgical method for leaching iron directly from ore and producing metallic iron.

T.C. Eisele

2005-10-01T23:59:59.000Z

445

Nature of the beam-density effect on energy loss by nonrelativistic charged-particle beams  

DOE Green Energy (OSTI)

The authors present a new formulation of the beam-density effect on energy loss by charged particles passing through matter, which exhibits an increased loss with a beam-shape dependence. This arises from a long-range dipolelike term contained in the two-particle vicinage function for cooperative energy loss by a pair of nonrelativistic particles. A new analytic expression for the vicinage function, which exhibits the long-range term, is also presented.

Rule, D.W.; Crawford, O.H.

1984-03-12T23:59:59.000Z

446

An Experimental Study of Power Losses of an Automotive Manual Transmission.  

E-Print Network (OSTI)

??In this study, the influence of a variety of operating conditions on the power losses and efficiency of an automotive manual transmission was investigated experimentally.… (more)

Szweda, Timothy Andrew

2008-01-01T23:59:59.000Z

447

Traditional And Angle-dependent Characterization Of Penn State’s Panel Transmission Loss Suite.  

E-Print Network (OSTI)

??The Center for Acoustics and Vibration at Penn State has a Panel Transmission Loss Suite consisting of a reverberation chamber coupled to an anechoic room.… (more)

Bauch, Paul

2013-01-01T23:59:59.000Z

448

A strategy for the management of energy losses in a local electricity distribution network.  

E-Print Network (OSTI)

??This dissertation contains a strategy to minimize the non-technical electrical energy losses in an electrical distribution network. In order to develop the strategy, a model… (more)

Fourie, Johannes Wilhelmus

2006-01-01T23:59:59.000Z

449

S&P- no rating impact from Indian Oil’s,3rd Qtr Net loss  

U.S. Energy Information Administration (EIA)

Standard & Poor's Ratings Services said today that the net loss of Indian rupee (Re) 58.3 million (US$1.3 million) reported by Indian Oil Corp. ...

450

S&P sees no rating impact from Nippon Oil's projected net loss ...  

U.S. Energy Information Administration (EIA)

Free Online Library: S&P sees no rating impact from Nippon Oil's projected net loss. by "Japan Weekly Monitor"; Business Business, international

451

Non-Kinetic Losses Caused by Electrochemical Carbon Corrosion in PEM Fuel Cells  

SciTech Connect

This paper presented non-kinetic losses in PEM fuel cells under an accelerated stress test of catalyst support. The cathode with carbon-supported Pt catalyst was prepared and characterized with potential hold at 1.2 V vs. SHE in PEM fuel cells. Irreversible losses caused by carbon corrosion were evaluated using a variety of electrochemical characterizations including cyclic voltammetry, linear sweep voltammetry, electrochemical impedance spectroscopy, and polarization technique. Ohmic losses at the cathode with potential hold were determined using its capacitive responses. Concentration losses in PEM fuel cells were analyzed in terms of Tafel behavior and thin film/flooded-agglomerate dynamics.

Park, Seh Kyu; Shao, Yuyan; Viswanathan, Vilayanur V.; Liu, Jun; Wang, Yong

2012-05-01T23:59:59.000Z

452

Loss of Patent Rights—Inventions That Are Disclosed But Not Claimed  

Science Conference Proceedings (OSTI)

Loss of Patent Rights—Inventions That Are Disclosed But Not Claimed. David V. Radack. The majority of patent applications filed with the United States Patent ...

453

Calorimetric method of ac loss measurement in a rotating magnetic field  

Science Conference Proceedings (OSTI)

A method is described for calorimetric ac-loss measurements of high-T{sub c} superconductors (HTS) at 80 K. It is based on a technique used at 4.2 K for conventional superconducting wires that allows an easy loss measurement in parallel or perpendicular external field orientation. This paper focuses on ac loss measurement setup and calibration in a rotating magnetic field. This experimental setup is to demonstrate measuring loss using a temperature rise method under the influence of a rotating magnetic field. The slight temperature increase of the sample in an ac-field is used as a measure of losses. The aim is to simulate the loss in rotating machines using HTS. This is a unique technique to measure total ac loss in HTS at power frequencies. The sample is mounted on to a cold finger extended from a liquid nitrogen heat exchanger (HEX). The thermal insulation between the HEX and sample is provided by a material of low thermal conductivity, and low eddy current heating sample holder in vacuum vessel. A temperature sensor and noninductive heater have been incorporated in the sample holder allowing a rapid sample change. The main part of the data is obtained in the calorimetric measurement is used for calibration. The focus is on the accuracy and calibrations required to predict the actual ac losses in HTS. This setup has the advantage of being able to measure the total ac loss under the influence of a continuous moving field as experienced by any rotating machines.

Ghoshal, P. K. [Oxford Instruments NanoScience, Abingdon, Oxfordshire OX13 5QX (United Kingdom); Coombs, T. A.; Campbell, A. M. [Department of Engineering, Electrical Engineering, University of Cambridge, Cambridge CB3 0FA (United Kingdom)

2010-07-15T23:59:59.000Z

454

Elegiac Rhetorics: From Loss to Dialogue in Lyric Poetry  

E-Print Network (OSTI)

By reading mournful poems rhetorically, I expand the concept of the elegy in order to reveal continuities between private and communal modes of mourning. My emphasis on readers of elegies challenges writer-centered definitions of the elegy, like that given by Peter Sacks, who describes how the elegy's formal conventions express the elegist's own motives for writing. Although Sacks's Freudian approach helpfully delineates some of the consoling effects that writing poetry has on the elegist herself, this dissertation revises such writer-centered concepts of the elegy by asking how elegies rhetorically invoke ethical relationships between writers and readers. By reading elegiac poems through Kenneth Burke's rhetorical theories and Emmanuel Levinas's ethics, I argue that these poems characterize, as Levinas suggests, subjectivity as fundamentally structured by ethical relationships with others. In keeping with this ethical focus, I analyze anthology poems, meaning short lyric poems written by acclaimed authors, easily accessible, and easily remembered - including several well-known poems by such authors as Emily Dickinson, Gerard Manley Hopkins, and Robert Frost. Anthology pieces invite ethical evaluation in part because they represent what counts as valuable poetry - and also, by implication, what does not. Because anthology poems are read by broad, diverse audiences, I suggest that a rhetorical methodology focusing on writer-reader relationships is essential to evaluating these poems' ethical implications. This rhetorical approach to poetry, however, questions rhetoricians and aesthetic theorists from Aristotle and Longinus to Lloyd F. Bitzer and Derek Attridge who emphasize distinctions between rhetoric and poetics. I address the ongoing debate about the relationship between rhetoric and poetics by arguing, along the lines of Wayne C. Booth's affirmation that fiction and rhetoric are interconnected, that poetry and rhetoric are likewise integrally tied. To this debate, I add an emphasis on philosophy - from which Plato, Ramus, and others exclude rhetoric and poetry - as likewise essential to understanding both poetry and rhetoric. By recognizing the interrelatedness of these disciplines, we may better clarify poetry's broad, ethical appeals that seem so valuable to readers in situations of loss.

Hart, Sarah Elizabeth

2012-08-01T23:59:59.000Z

455

Step-wise supercritical extraction of carbonaceous residua  

DOE Patents (OSTI)

A method of fractionating a mixture containing high boiling carbonaceous material and normally solid mineral matter includes processing with a plurality of different supercritical solvents. The mixture is treated with a first solvent of high critical temperature and solvent capacity to extract a large fraction as solute. The solute is released as liquid from solvent and successively treated with other supercritical solvents of different critical values to extract fractions of differing properties. Fractionation can be supplemented by solute reflux over a temperature gradient, pressure let down in steps and extractions at varying temperature and pressure values.

Warzinski, Robert P. (Venetia, PA)

1987-01-01T23:59:59.000Z

456

Method and apparatus for back-extracting metal chelates  

DOE Patents (OSTI)

A method is described for extracting metal and metalloid species from a solid or liquid substrate using a supercritical fluid solvent containing one or more chelating agents followed by back-extracting the metal and metalloid species from the metal and metalloid chelates formed thereby. The back-extraction acidic solution is performed utilizing an acidic solution. Upon sufficient exposure of the metal and metalloid chelates to the acidic solution, the metal and metalloid species are released from the chelates into the acid solution, while the chelating agent remains in the supercritical fluid solvent. The chelating agent is thereby regenerated and the metal and metalloid species recovered. 3 figs.

Wai, C.M.; Smart, N.G.; Lin, Y.

1998-08-11T23:59:59.000Z

457

Method and apparatus for back-extracting metal chelates  

DOE Patents (OSTI)

A method of extracting metal and metalloid species from a solid or liquid substrate using a supercritical fluid solvent containing one or more chelating agents followed by back-extracting the metal and metalloid species from the metal and metalloid chelates formed thereby. The back-extraction acidic solution is performed utilizing an acidic solution. Upon sufficient exposure of the metal and metalloid chelates to the acidic solution, the metal and metalloid species are released from the chelates into the acid solution, while the chelating agent remains in the supercritical fluid solvent. The chelating agent is thereby regenerated and the metal and metalloid species recovered.

Wai, Chien M. (Moscow, IA); Smart, Neil G. (Moscow, IA); Lin, Yuehe (Moscow, IA)

1998-01-01T23:59:59.000Z

458

Degradation problems with the solvent extraction organic at Roessing uranium  

Science Conference Proceedings (OSTI)

Roessing Uranium Ltd recovers uranium from a low-grade ore in Namibia. Uranium is recovered and purified from an ion-exchange eluate in a solvent-extraction plant. The solvent-extraction plant uses Alamine 336 as the extractant for uranium, with isodecanol used as a phase modifier in Sasol SSX 210, an aliphatic hydrocarbon diluent. Since the plant started in the mid 1970's, there have been a few episodes where the tertiary amine has been quickly and severely degraded when the plant was operated outside certain operating parameters. The Rossing experience is discussed in more detail in this paper. (authors)

Munyungano, Brodrick [Roessing Uranium Ltd, Private Bag 5005, Swakopmund (Namibia); Feather, Angus [Cognis, P. O. Box 361, Honeydew, 2040 (South Africa); Virnig, Michael [Cognis Corporation, 2430 N. Huachuca Dr, Tucson, Az (United States)

2008-07-01T23:59:59.000Z

459

Centrifugal contractors for laboratory-scale solvent extraction tests  

SciTech Connect

A 2-cm contactor (minicontactor) was developed and used at Argonne National Laboratory for laboratory-scale testing of solvent extraction flowsheets. This new contactor requires only 1 L of simulated waste feed, which is significantly less than the 10 L required for the 4-cm unit that had previously been used. In addition, the volume requirements for the other aqueous and organic feeds are reduced correspondingly. This paper (1) discusses the design of the minicontactor, (2) describes results from having applied the minicontactor to testing various solvent extraction flowsheets, and (3) compares the minicontactor with the 4-cm contactor as a device for testing solvent extraction flowsheets on a laboratory scale.

Leonard, R.A.; Chamberlain, D.B.; Conner, C.

1995-12-31T23:59:59.000Z

460

Step-wise supercritical extraction of carbonaceous residua  

DOE Patents (OSTI)

A method of fractionating a mixture containing high boiling carbonaceous material and normally solid mineral matter which includes processing with a plurality of different supercritical solvents is described. The mixture is treated with a first solvent of high critical temperature and solvent capacity to extract a large fraction as solute. The solute is released as liquid from solvent and successively treated with other supercritical solvents of different critical values to extract fractions of differing properties. Fractionation can be supplemented by solute reflux over a temperature gradient, pressure let down in steps and extractions at varying temperature and pressure values.

Warzinski, R.P.

1986-05-15T23:59:59.000Z

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Approaches for regeneration of amine-carboxylic acid extracts  

Science Conference Proceedings (OSTI)

Extraction processes based on reversible chemical complexation can be useful for separation of polar organics from dilute solution. Tertiary amines are effective extractants for the recovery of carboxylic acids from aqueous solution. The regeneration of aminecarboxylic acid extracts is an important step which strongly influences the economic viability of the separation process. Several regeneration methods are critically reviewed, and the factors that affect swing regeneration processes, including temperature-swing, diluent composition-swing and pH-swing with a volatile base are discussed. Interest in this area comes from interest in treatment of waste streams, particularly in petrochemical and fermentation manufacture.

Dai, Y.; King, C.J.

1995-07-01T23:59:59.000Z

462

Bidentate organophosphorus solvent extraction process for actinide recovery and partition  

DOE Patents (OSTI)

A liquid-liquid extraction process for the recovery and partitioning of actinide values from acidic nuclear waste aqueous solutions, the actinide values including trivalent, tetravalent and hexavalent oxidation states is provided and includes the steps of contacting the aqueous solution with a bidentate organophosphorous extractant to extract essentially all of the actinide values into the organic phase. Thereafter the respective actinide fractions are selectively partitioned into separate aqueous solutions by contact with dilute nitric or nitric-hydrofluoric acid solutions. The hexavalent uranium is finally removed from the organic phase by contact with a dilute sodium carbonate solution.

Schulz, Wallace W. (Richland, WA)

1976-01-01T23:59:59.000Z

463

Selective Extraction of Uranium from Liquid or Supercritical Carbon Dioxide  

SciTech Connect

Current liquid-liquid extraction processes used in recycling irradiated nuclear fuel rely on (1) strong nitric acid to dissolve uranium oxide fuel, and (2) the use of aliphatic hydrocarbons as a diluent in formulating the solvent used to extract uranium. The nitric acid dissolution process is not selective. It dissolves virtually the entire fuel meat which complicates the uranium extraction process. In addition, a solvent washing process is used to remove TBP degradation products, which adds complexity to the recycling plant and increases the overall plant footprint and cost. A liquid or supercritical carbon dioxide (l/sc -CO2) system was designed to mitigate these problems. Indeed, TBP nitric acid complexes are highly soluble in l/sc -CO2 and are capable of extracting uranium directly from UO2, UO3 and U3O8 powders. This eliminates the need for total acid dissolution of the irradiated fuel. Furthermore, since CO2 is easily recycled by evaporation at room temperature and pressure, it eliminates the complex solvent washing process. In this report, we demonstrate: (1) A reprocessing scheme starting with the selective extraction of uranium from solid uranium oxides into a TBP-HNO3 loaded Sc-CO2 phase, (2) Back extraction of uranium into an aqueous phase, and (3) Conversion of recovered purified uranium into uranium oxide. The purified uranium product from step 3 can be disposed of as low level waste, or mixed with enriched uranium for use in a reactor for another fuel cycle. After an introduction on the concept and properties of supercritical fluids, we first report the characterization of the different oxides used for this project. Our extraction system and our online monitoring capability using UV-Vis absorbance spectroscopy directly in sc-CO2 is then presented. Next, the uranium extraction efficiencies and kinetics is demonstrated for different oxides and under different physical and chemical conditions: l/sc -CO2 pressure and temperature, TBP/HNO3 complex used, reductant or complexant used for selectivity, and ionic liquids used as supportive media. To complete the extraction and recovery cycle, we then demonstrate uranium back extraction from the TBP loaded sc-CO2 phase into an aqueous phase and the characterization of the uranium complex formed at the end of this process. Another aspect of this project was to limit proliferation risks by either co-extracting uranium and plutonium, or by leaving plutonium behind by selectively extracting uranium. We report that the former is easily achieved, since plutonium is in the tetravalent or hexavalent oxidation state in the oxidizing environment created by the TBP-nitric acid complex, and is therefore co-extracted. The latter is more challenging, as a reductant or complexant to plutonium has to be used to selectively extract uranium. After undertaking experiments on different reducing or complexing systems (e.g., AcetoHydroxamic Acid (AHA), Fe(II), ascorbic acid), oxalic acid was chosen as it can complex tetravalent actinides (Pu, Np, Th) in the aqueous phase while allowing the extraction of hexavalent uranium in the sc-CO2 phase. Finally, we show results using an alternative media to commonly used aqueous phases: ionic liquids. We show the dissolution of uranium in ionic liquids and its extraction using sc-CO2 with and without the presence of AHA. The possible separation of trivalent actinides from uranium is also demonstrated in ionic liquids using neodymium as a surrogate and diglycolamides as the extractant.

Farawila, Anne F.; O'Hara, Matthew J.; Wai, Chien M.; Taylor, Harry Z.; Liao, Yu-Jung

2012-07-31T23:59:59.000Z

464

Mercury extraction by the TRUEX process solvent: I. Kinetics, extractable species, dependence on nitric acid concentration and stoichiometry  

SciTech Connect

Mercury extraction from acidic aqueous solutions by the TRUEX process solvent (0.2 M CMPO, 1.4 M TBP in n-dodecane) has not extensively been examined. Research at the Idaho Chemical Processing Plant is currently in progress to evaluate the TRUEX process for actinide removal from several acidic waste streams, including liquid sodium-bearing waste (SBW), which contains significant quantities of mercury. Preliminary experiments were performed involving the extraction of Hg{sup 203}, added as HgCl{sub 2}, from 0.01 to 10 M HNO{sub 3} solutions. Mercury distribution coefficients (D{sub Hg}) range between 3 and 60 from 0.01 M to 2 M HNO{sub 3}. At higher nitric acid concentrations, i.e. 5 M HNO{sub 3} or greater, D{sub Hg} significantly decreases to values less than 1. These results indicate mercury is extracted from acidic solutions {<=}{approximately}2 M HNO{sub 3} and stripped with nitric acid solutions {>=}{approximately}5 M HNO{sub 3}. Experimental results indicate the extractable species is HgCl{sub 2} from nitrate media, i.e., chloride must be present in the nitrate feed to extract mercury. Extractions from Hg(NO{sub 3}){sub 2} solutions indicated substantially reduced distribution ratios, typically D{sub Hg}< 1, for the range of nitric acid concentrations examined (0.01 to 8 M HNO{sub 3}). Extraction of mercury, as HgCl{sub 2}, by the individual components of the TRUEX solvent was also examined from 2 M HNO{sub 3}. The diluent, n-dodecane, does not measurably extract mercury. With a 1.4 M TBP/n-dodecane solvent, D{sub Hg} {approximately}3.4 compared with D{sub Hg} {approximately}7 for the TRUEX solvent. Classical slope analysis techniques were utilized to evaluate the stoichiometric coefficients of Hg extraction independently for both CMPO and TBP.

Herbst, R.S.; Brewer, K.N.; Tranter, T.J.; Todd, T.A.

1995-12-01T23:59:59.000Z

465

Validation of statistical estimation of transmission loss in the presence of geoacoustic inversion uncertainty  

E-Print Network (OSTI)

, these sampled parameters are mapped to the transmission loss domain where a full multidimensional probability, exhaustive grid sampling was used to obtain the geoacoustic uncertainties and map these to the TL domainValidation of statistical estimation of transmission loss in the presence of geoacoustic inversion

Buckingham, Michael

466

Preemption of TCCs and Deadweight Loss in Centrally Dispatched Electricity Systems with  

E-Print Network (OSTI)

access to support a competitive electricity market. The FERC proposal defines transmission servicePWP-041 Preemption of TCCs and Deadweight Loss in Centrally Dispatched Electricity Systems.ucei.berkeley.edu/ucei #12;1 Preemption of TCCs and Deadweight Loss in Centrally Dispatched Electricity Systems

California at Berkeley. University of

467

Power quality and electrical energy losses as a key drivers for smart grid platformdevelopment  

Science Conference Proceedings (OSTI)

This paper presents how the problems of power quality and electrical energy losses in distribution systems led to the development of an interoperable smart grid platform being implemented in several electrical utilities in Serbia through various pilot ... Keywords: ICT, MV/LV substation automation, electrical energy losses, power quality, smart grids

Zoran P. Staji?; Aleksandar Janji?; Zoran Simendi?

2011-07-01T23:59:59.000Z

468

GASLESS COMBUSTION FRONTS WITH HEAT LOSS ANNA GHAZARYAN, STEPHEN SCHECTER, AND PETER L. SIMON  

E-Print Network (OSTI)

GASLESS COMBUSTION FRONTS WITH HEAT LOSS ANNA GHAZARYAN, STEPHEN SCHECTER, AND PETER L. SIMON Abstract. For a model of gasless combustion with heat loss, we use geometric singular perturbation theory to show existence of traveling combustion fronts. We show that the fronts are nonlinearly stable

Schecter, Stephen

469

Market power and welfare effects in DC power flow electricity models with thermal line losses  

Science Conference Proceedings (OSTI)

A nodal electric power network with Cournot-Nash interaction among power generators is formulated as a mixed complementarity problem. The model incorporates a direct current (DC) power flow approximation with thermal line losses to model real-time flows. ... Keywords: Electricity markets, Imperfect competition, Thermal line losses, Welfare measurement

Rastislav Ivanic; Paul V. Preckel; Zuwei Yu

2005-10-01T23:59:59.000Z

470

Based on Hierarchy Analysis and Fuzzy Mathematical Electric Enterprises Loss Problems  

Science Conference Proceedings (OSTI)

Whenever mentioning electric enterprises, people will always have the impression: the more power generation the more losses. With China's economic marketing process deepening, market reform of electric power prices appears to shoulder heavy responsibilities. ... Keywords: electric enterprises losses, AHP, fuzzy mathematics

Yao Hua; Zhenkun Tian

2012-05-01T23:59:59.000Z

471

Neurobiology of Disease Loss of ALS2 Function Is Insufficient to Trigger Motor  

E-Print Network (OSTI)

Neurobiology of Disease Loss of ALS2 Function Is Insufficient to Trigger Motor Neuron Degeneration, Baltimore, Maryland 21205 Amyotrophic lateral sclerosis (ALS), the most common motor neuron disease, is caused by a selective loss of motor neurons in the CNS. MutationsintheALS2

Blackshaw, Seth

472

Energy Loss of a Heavy Particle near 3D Charged Rotating Hairy Black Hole  

E-Print Network (OSTI)

In this paper we consider charged rotating black hole in 3 dimensions with an scalar charge and discuss about energy loss of heavy particle moving near the black hole horizon. We also study quasi-normal modes and find dispersion relations. We find that the effect of scalar charge and electric charge is increasing energy loss.

Jalil Naji

2014-01-17T23:59:59.000Z

473

Kalman-filter model for determining block and trickle SNM losses  

Science Conference Proceedings (OSTI)

This paper describes an integrated decision procedure for deciding whether a diversion of SNM has occurred. Two possible types of diversion are considered: a block loss during a single time period and a cumulative trickle loss over several time periods. The methodology used is based on a compound Kalman filter model. Numerical examples illustrate our approach.

Barlow, R.E.; Durst, M.J.; Smiriga, N.G.

1982-07-01T23:59:59.000Z

474

Reduced Loss in Precipitation Measurements Using a New Wind Shield for Raingages  

Science Conference Proceedings (OSTI)

A problem of great concern in precipitation measurements is the wind loss. This paper presents a new wind shield that reduces this loss. Tests of the new shield were made in a wind tunnel and in the field. The wind shield consisted of a flange ...

Anders Lindroth

1991-06-01T23:59:59.000Z

475

Parallel algorithms for inductance extraction of VLSI circuits  

Science Conference Proceedings (OSTI)

Inductance extraction involves estimating the mutual inductance in a VLSI circuit. Due to increasing clock speed and diminishing feature sizes of modern VLSI circuits, the effects of inductance are increasingly felt during the testing and verification ...

Hemant Mahawar; Vivek Sarin

2006-04-01T23:59:59.000Z

476

Innovative Drying Technology Extracts More Energy from High Moisture Coal |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Innovative Drying Technology Extracts More Energy from High Innovative Drying Technology Extracts More Energy from High Moisture Coal Innovative Drying Technology Extracts More Energy from High Moisture Coal March 11, 2010 - 12:00pm Addthis Washington, DC - An innovative coal-drying technology that will extract more energy from high moisture coal at less cost and simultaneously reduce potentially harmful emissions is ready for commercial use after successful testing at a Minnesota electric utility. The DryFining(TM) technology was developed with funding from the first round of the U.S. Department of Energy's Clean Coal Power Initiative (CCPI). Great River Energy of Maple Grove, Minn., has selected the WorleyParsons Group to exclusively distribute licenses for the technology, which essentially uses waste heat from a power plant to reduce moisture content

477

Process to upgrade coal liquids by extraction prior to hydrodenitrogenation  

DOE Patents (OSTI)

Oxygen compounds are removed, e.g., by extraction, from a coal liquid prior to its hydrogenation. As a result, compared to hydrogenation of such a non-treated coal liquid, the rate of nitrogen removal is increased.

Schneider, Abraham (Overbrook Hills, PA); Hollstein, Elmer J. (Wilmington, DE); Janoski, Edward J. (Havertown, PA); Scheibel, Edward G. (Media, PA)

1982-01-01T23:59:59.000Z

478

Construction of prototype system for directional solvent extraction desalination  

E-Print Network (OSTI)

Directional solvent extraction has been demonstrated as a low temperature, membrane free desalination process. This method dissolves the water into an inexpensive, benign directional solvent, rejects the contaminants, then ...

Fowler, Michael James

2012-01-01T23:59:59.000Z

479

High-pressure solvent extraction of methane from geopressured fluids  

DOE Green Energy (OSTI)

Solvent extraction is propsed as a means of recovering dissolved methane from geopressured-geothermal brines at high pressures. Our assessment shows that additional investment in a high pressure solvent extraction plant preceding direct injection disposal of brines into isolated aquifers can be profitable. The technical and economic issues are discussed and compared with other injection methods such as complete depressurization for methane recovery followed by conventional mechanical pumping. The contributions of hydraulic (pressure) energy recovery and geothermal power production are also assessed. As a first step in the evaluation of solvent extraction, the solubilities of a promising solvent candidate, n-hexadecane, and a potential low cost solvent, No. 2 Diesel fuel, were measured in 15 wt % NaCl solutions at temperatures up to 150/sup 0/C. Preliminary results of initial extraction tests at 150/sup 0/C and 1000 psi in sub-pilot scale equipment are also presented.

Quong, R.; Otsuki, H.H.; Locke, F.E.; Netherton, R.

1981-08-01T23:59:59.000Z

480

Chiral Separation by Enantioselective Liquid-Liquid Extraction  

E-Print Network (OSTI)

systems for TFSS is the molten salt extraction system. The component units are centrifugal contactors needed to achieve 1 wppm, at a distribution coefficient of 1, consists of sixteen contactor units

Groningen, Rijksuniversiteit

Note: This page contains sample records for the topic "1983-2011 extraction loss" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Joint extraction of entities and relations for opinion recognition  

Science Conference Proceedings (OSTI)

We present an approach for the joint extraction of entities and relations in the context of opinion recognition and analysis. We identify two types of opinion-related entities --- expressions of opinions and sources of opinions --- along with the linking ...

Yejin Choi; Eric Breck; Claire Cardie

2006-07-01T23:59:59.000Z

482

2000 TMS Fall Extraction and Process Metallurgy Meeting: Hertz ...  

Science Conference Proceedings (OSTI)

2000 TMS Fall Extraction and Process Metallurgy Meeting: Hertz Rent-a-Car ... Hertz has been selected as the official car rental company for the Lead-Zinc 2000  ...

483

Resource Extraction, Backstop Technologies, and Growth ? Preliminary Version  

E-Print Network (OSTI)

We incorporate a non-renewable resource in a standard framework of endogenous growth through expanding varieties. Moreover, we allow for a backstop technology that is able to produce a perfect substitute for the resource. Our model is used to analyze resource extraction and technological progress over time. Three consecutive regimes of energy use can emerge in the economy: only resource extraction, simultaneous use, and complete reliance on the backstop technology. The introduction of the backstop technology crucially affects the time paths of fossil fuel extraction and technological progress. We provide conditions under which either peak-oil emerges, or the extraction path is monotonically increasing or decreasing until exhaustion of the resource stock. The rate of technological progress is non-monotonic over time: it declines initially, starts increasing when the economy approaches the regime change and jumps down once the resource stock is exhausted.

Gerard Van Der Meijden; Sjak Smulders

2013-01-01T23:59:59.000Z

484

Extracting clinically-actionable information from wearable physiological monitors  

E-Print Network (OSTI)

In this thesis I examine several ways of extracting information from wearable monitors so as to help make clinical decisions. Wearable physiological sensors are developing rapidly, and pose a possible part of the solution ...

Haslam, Bryan (Bryan Todd)

2011-01-01T23:59:59.000Z

485

Place in perspective: extracting online information about points of interest  

Science Conference Proceedings (OSTI)

During the last few years, the amount of online descriptive information about places has reached reasonable dimensions for many cities in the world. Being such information mostly in Natural Language text, Information Extraction techniques are needed ...

Ana O. Alves; Francisco C. Pereira; Filipe Rodrigues; Joăo Oliveirinha

2010-11-01T23:59:59.000Z

486

Oil Extraction and Analysis: Critical Issues and Comparative Studies  

Science Conference Proceedings (OSTI)

This book contains papers from the symposium “Critical Issues, Current and Emerging Technologies for Determination of Crude Fat Content in Food, Feed, and Seeds.” Oil Extraction and Analysis: Critical Issues and Comparative Studies Processing agricultura

487

Re-examining automatic keyphrase extraction approaches in scientific articles  

Science Conference Proceedings (OSTI)

We tackle two major issues in automatic keyphrase extraction using scientific articles: candidate selection and feature engineering. To develop an efficient candidate selection method, we analyze the nature and variation of keyphrases and ...

Su Nam Kim; Min-Yen Kan

2009-08-01T23:59:59.000Z

488

Supercritical fluid-based extraction/processing: then and now  

Science Conference Proceedings (OSTI)

An expert in supercritical fluid technologies reviews past, present, and future developments in this field as they relate to lipids. Supercritical fluid-based extraction/processing: then and now Inform Magazine Inform Archives Processing Jerry W. King

489

Business Specific Online Information Extraction from German Websites  

Science Conference Proceedings (OSTI)

This paper presents a system that uses the domain name of a German business website to locate its information pages (e.g. company profile, contact page, imprint) and then identifies business specific information. We therefore concentrate on the extraction ...

Yeong Su Lee; Michaela Geierhos

2009-02-01T23:59:59.000Z

490

Topic Extraction from Text Documents Using Multiple-Cause Networks  

Science Conference Proceedings (OSTI)

This paper presents an approach to the topic extraction from text documents using probabilistic graphical models. Multiple-cause networks with latent variables are used and the Helmholtz machines are utilized to ease the learning and inference. The learning ...

Jeong-Ho Chang; Jae Won Lee; Yuseop Kim; Byoung-Tak Zhang

2002-08-01T23:59:59.000Z

491

Extracting Envelopes of Nonzonally Propagating Rossby Wave Packets  

Science Conference Proceedings (OSTI)

Previously developed techniques that have been used to extract envelopes of Rossby wave packets are based on the assumption of zonally propagating waves. In this note a method that does not require such an assumption is proposed. The advantages ...

Aleksey V. Zimin; Istvan Szunyogh; Brian R. Hunt; Edward Ott

2006-04-01T23:59:59.000Z

492

Extraction and recovery of plutonium and americium from nitric acid waste solutions by the TRUEX process - continuing development studies  

SciTech Connect

This report summarizes the work done to date on the application of the TRUEX solvent extraction process for removing and separately recovering plutonium and americium from a nitric acid waste solution containing these elements, uranium, and a complement of inert metal ions. This simulated waste stream is typical of a raffinate from a tributyl phosphate (TBP)-based solvent extraction process for removing uranium and plutonium from dissolved plutonium-containing metallurgical scrap. The TRUEX process solvent in these experiments was a solution of TBP and octyl(phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide (CMPO) dissolved in carbon tetrachloride. A flowsheet was designed on the basis of measured batch distribution ratios to reduce the TRU content of the solidified raffinate to less than or equal to 10 nCi/g and was tested in a countercurrent experiment performed in a 14-stage Argonne-model centrifugal contractor. The process solvent was recycled without cleanup. An unexpectedly high evaporative loss of CCl/sub 4/ resulted in concentration of the active extractant, CMPO, to nearly 0.30M in the solvent. Results are consistent with this higher CMPO concentration. The raffinate contained only 2 nCi/g of TRU, but the higher CMPO concentration resulted in reduced effectiveness in the stripping of americium from the solvent. Conditions can be easily adjusted to give high yields and good separation of americium and plutonium. Experimental studies of the hydrolytic and gamma-radiolytic degradation of the TRUEX-CCl/sub 4/ showed that solvent degradation would be (1) minimal for a year of processing this typical feed, which contained no fission products, and (2) could be explained almost entirely by hydrolytic and radiolytic damage to TBP. Even for gross amounts of solvent damage, scrubbing with aqueous sodium carbonate solution restored the original americium extraction and stripping capability of the solvent. 43 refs., 5 figs., 36 tabs.

Leonard, R.A.; Vandegrift, G.F.; Kalina, D.G.; Fischer, D.F.; Bane, R.W.; Burris, L.; Horwitz, E.P.; Chiarisia, R.; Diamond, H.

1985-09-01T23:59:59.000Z

493

2011 Short CourseNew Technologies in Oilseed Extraction and Edible Oil Refining  

Science Conference Proceedings (OSTI)

New Technologies in Oilseed Extraction and Edible Oil Refining ShortCourse held at the 102nd AOCS Annual Meeting and Expo. 2011 Short CourseNew Technologies in Oilseed Extraction and Edible Oil Refining New Technologies in Oilseed Extraction

494

2010 Short Course New Technologies in Oilseed Extraction and Edible Oil Refining  

Science Conference Proceedings (OSTI)

New Technologies in Oilseed Extraction and Edible Oil Refining Short Course held at the 101st AOCS Annual Meeting and Expo. 2010 Short Course New Technologies in Oilseed Extraction and Edible Oil Refining New Technologies in Oilseed Extraction and

495

Energy loss in high energy heavy ion collisions from the Hydro+Jet model  

E-Print Network (OSTI)

We investigate the effect of energy loss of jets in high energy heavy ion collisions by using a full three-dimensional space-time evolution of a fluid combined with (mini-)jets that are explicitly evolved in space-time. In order to fit the pi^0 data for the Au+Au collisions at sqrt(s_{NN}) = 130 GeV, the space-time averaged energy loss dE/dx(tau energy loss occurs at the very early time less than 2 fm/c in the QGP phase and that energy loss in the mixed phase is negligible within our parameterization for jet energy loss. This is a consequence of strong expansion of the system.

Hirano, T; Hirano, Tetsufumi; Nara, Yasushi

2002-01-01T23:59:59.000Z

496

EXTRACTION SYSTEMS OF A HIGH-FREQUENCY PROTON SOURCE  

SciTech Connect

Experiments were carried out to determine the most convenient shape of the extraction system for a highfrequency ion source. An aluminum probe surrounded by a quartz tube was chosen as the extraction system. The effects of height, cross section, and shape were studied. Channels with the shape of the beam spreading under the influence of the space charge and with a combination of this shape and a cup shape were found to be most suitable. (M.C.G.)

Prelec, K.

1963-01-01T23:59:59.000Z

497

Extraction of cesium and strontium from nuclear waste  

DOE Patents (OSTI)

Cesium is extracted from acidified nuclear waste by contacting the waste with a bis 4,4[prime](5) [1-hydroxy-2-ethylhexyl]benzo 18-crown-6 compound and a cation exchanger in a matrix solution. Strontium is extracted from acidified nuclear waste by contacting the waste with a bis 4,4[prime](5[prime]) [1-hydroxyheptyl]cyclohexo 18-crown-6 compound, and a cation exchanger in a matrix solution. 3 figs.

Davis, M.W. Jr.; Bowers, C.B. Jr.

1988-06-07T23:59:59.000Z

498