Powered by Deep Web Technologies
Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Manhattan Project: Working K-25 into the Mix, 1943-1944  

Office of Scientific and Technical Information (OSTI)

K-25 Gaseous Diffusion Plant, Oak Ridge WORKING K-25 INTO THE MIX K-25 Gaseous Diffusion Plant, Oak Ridge WORKING K-25 INTO THE MIX (Oak Ridge: Clinton, 1943-1944) Events > The Uranium Path to the Bomb, 1942-1944 Y-12: Design, 1942-1943 Y-12: Construction, 1943 Y-12: Operation, 1943-1944 Working K-25 into the Mix, 1943-1944 The Navy and Thermal Diffusion, 1944 In 1941 and 1942, gaseous diffusion had been considered by many as the most promising method of enriching uranium. The British in the influential 1941 MAUD Report had advocated the use of gaseous diffusion alone, and the 1942 Lewis committee placed it first among isotope separation methods. Despite the soundness of the theory, the process had yet to produce any samples of enriched uranium when the K-25 Gaseous Diffusion Plant was authorized in late 1942.

2

Manhattan Project: Y-12 Operation, 1943-1944  

Office of Scientific and Technical Information (OSTI)

Alpha Racetrack, Y-12 Electromagnetic Plant, Oak Ridge Y-12: OPERATION Alpha Racetrack, Y-12 Electromagnetic Plant, Oak Ridge Y-12: OPERATION (Oak Ridge: Clinton, 1943-1944) Events > The Uranium Path to the Bomb, 1942-1944 Y-12: Design, 1942-1943 Y-12: Construction, 1943 Y-12: Operation, 1943-1944 Working K-25 into the Mix, 1943-1944 The Navy and Thermal Diffusion, 1944 During the summer and fall of 1943, the Y-12 Electromagnetic Plant at Oak Ridge began to take shape. The huge buildings to house the operating equipment were readied as manufacturers began delivering everything from electrical switches to motors, valves, and tanks. While construction and outfitting proceeded, almost 5,000 operating and maintenance personnel were hired and trained. Then, between October and mid-December, Y-12 paid the price for being a new technology that had not been put through its paces in a pilot plant. Vacuum tanks in the first Alpha racetrack leaked and shimmied out of line due to magnetic pressure, welds failed, electrical circuits malfunctioned, and operators made frequent mistakes. Most seriously, the magnet coils shorted out because of rust and sediment in the cooling oil.

3

Manhattan Project: Basic Research at Los Alamos, 1943-1944  

Office of Scientific and Technical Information (OSTI)

Norris Bradbury, Robert Oppenheimer, Richard Feynman, Enrico Fermi, and others, Los Alamos, 1946 BASIC RESEARCH AT LOS ALAMOS Norris Bradbury, Robert Oppenheimer, Richard Feynman, Enrico Fermi, and others, Los Alamos, 1946 BASIC RESEARCH AT LOS ALAMOS (Los Alamos: Laboratory, 1943-1944) Events > Bringing It All Together, 1942-1945 Establishing Los Alamos, 1942-1943 Early Bomb Design, 1943-1944 Basic Research at Los Alamos, 1943-1944 Implosion Becomes a Necessity, 1944 Oak Ridge and Hanford Come Through, 1944-1945 Final Bomb Design, 1944-1945 Atomic Rivals and the ALSOS Mission, 1938-1945 Espionage and the Manhattan Project, 1940-1945 Enrico Fermi The first few months at Los Alamos were occupied with briefings on nuclear physics for the technical staff and with planning research priorities and organizing the laboratory. Leslie Groves called once again on Warren Lewis to head a committee, this time to evaluate the Los Alamos program. The committee's recommendations resulted in the coordinated effort envisioned by those who advocated a unified laboratory for bomb research. Enrico Fermi (left) took control of critical mass experiments and standardization of measurement Hans Bethe techniques. Plutonium purification work, begun at the Met Lab, became high priority at Los Alamos, and increased attention was paid to metallurgy. The committee also recommended that an engineering division be organized to collaborate with physicists on bomb design and fabrication. The laboratory was thus organized into four divisions: theoretical (Hans A. Bethe, right); experimental physics (Robert F. Bacher); chemistry and metallurgy (Joseph W. Kennedy); and ordnance (Navy Captain William S. "Deke" Parsons). Like other Manhattan Project installations, Los Alamos soon began to expand beyond initial expectations.

4

Manhattan Project: Hanford Becomes Operational, 1943-1944  

Office of Scientific and Technical Information (OSTI)

F Reactor Plutonium Production Complex at Hanford, 1945 HANFORD BECOMES OPERATIONAL F Reactor Plutonium Production Complex at Hanford, 1945 HANFORD BECOMES OPERATIONAL (Hanford Engineer Works, 1943-1944) Events > The Plutonium Path to the Bomb, 1942-1944 Production Reactor (Pile) Design, 1942 DuPont and Hanford, 1942 CP-1 Goes Critical, December 2, 1942 Seaborg and Plutonium Chemistry, 1942-1944 Final Reactor Design and X-10, 1942-1943 Hanford Becomes Operational, 1943-1944 The plutonium production facilities at the Hanford Engineer Works took shape with the same wartime urgency as did the uranium facilities at Oak Ridge. In February 1943, Colonel Matthias returned to the location he had helped select the previous December and set up a temporary headquarters. In late March, Matthias received his assignment. The three water-cooled production reactor (piles), designated by the letters B, D, and F, would be built about six miles apart on the south bank of the Columbia River. The four chemical separation plants would be built in pairs at two sites nearly ten miles south of the piles. A facility to produce slugs and perform tests would be approximately twenty miles southeast of the separation plants near Richland. Temporary quarters for construction workers would be put up at the Hanford town site, while permanent facilities for other personnel would be located down the road in Richland, safely removed from the production and separation plants. Life at Hanford would soon come to resemble that of the other "atomic boomtowns" of the Manhattan Project, Los Alamos and Oak Ridge.

5

Manhattan Project: Early Bomb Design, Los Alamos: Laboratory, 1943-1944  

Office of Scientific and Technical Information (OSTI)

Little Boy at Tinian Island, August 1945 EARLY BOMB DESIGN Little Boy at Tinian Island, August 1945 EARLY BOMB DESIGN (Los Alamos: Laboratory, 1943-1944) Events > Bringing it All Together, 1942-1945 Establishing Los Alamos, 1942-1943 Early Bomb Design, 1943-1944 Basic Research at Los Alamos, 1943-1944 Implosion Becomes a Necessity, 1944 Oak Ridge and Hanford Come Through, 1944-1945 Final Bomb Design, 1944-1945 Atomic Rivals and the ALSOS Mission, 1938-1945 Espionage and the Manhattan Project, 1940-1945 Early work on the design of the atomic bomb began even as scientists continued to arrive at Los Alamos throughout 1943. The properties of uranium were reasonably well understood, those of plutonium less so, and knowledge of fission explosions entirely theoretical. That 2.2 secondary neutrons were produced when uranium-235 fissioned was accepted, but while Glenn Seaborg's team had proven in March 1941 that plutonium underwent neutron-induced fission, it was not known yet if plutonium released secondary neutrons during bombardment. Further, the exact sizes of the "cross sections" of various fissionable substances had yet to be determined in experiments using the various particle accelerators then being shipped to Los Alamos. The theoretical consensus was that fission Fission chain reaction chain reactions (left) did take place with sufficient speed to produce powerful releases of energy (and not simply result in the explosion of the critical mass itself), but only experiments could test this theory. The optimum size of the critical mass remained to be established, as did the optimum shape. When enough data were gathered to establish optimum critical mass, optimum effective mass still had to be determined. That is, it was not enough simply to start a chain reaction in a critical mass; it was necessary to start one in a mass that would release the greatest possible amount of energy before it was destroyed in the explosion.

6

K-25 East Wing Demolition Project Wraps Up, North End Work Next  

Energy.gov (U.S. Department of Energy (DOE))

Oak Ridge's EM program completes demolition on K-25's east wing and shifts attention to the north tower.

7

Manhattan Project: K-25 Gaseous Diffusion Plant  

Office of Scientific and Technical Information (OSTI)

K-25 Gaseous Diffusion Plant, Oak Ridge Events > The Uranium Path to the Bomb, 1942-1944 Events > The Uranium Path to the Bomb, 1942-1944 > Working K-25 into the Mix, Oak Ridge:...

8

Microsoft Word - k-25 cover  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

K-25 K-25 Building Decontamination and Decommissioning Project DOE/IG-0854 July 2011 Department of Energy Washington, DC 20585 July 13, 2011 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman Inspector General SUBJECT: INFORMATION: Audit Report on "The Department of Energy's K-25 Building Decontamination and Decommissioning Project" BACKGROUND The East Tennessee Technology Park (ETTP), formerly the Oak Ridge Gaseous Diffusion Plant, began operation during World War II as part of the Manhattan Project. As the Department of Energy's missions changed, operations at the Plant ceased and the Department began a massive environmental remediation effort with completion anticipated in 2016. In 2001, the Department

9

K-25 West Wing Demolition Completed  

Energy.gov (U.S. Department of Energy (DOE))

Thirteen months after demolition began, the final unit of K-25's 844,000 square foot west wing was taken down.

10

NUCLEAR POWER AND RESEARCH REACTORS 1939 1942 1943 1944  

E-Print Network (OSTI)

trash bags) of having been at the HFIR facility, which is surrounded by woods. Bears had also been by TWRA officials near ORNL's HFIR and moved to a wildlife management area in Scott County. (Photo: Jason

11

K-25 Structural Separation and Demolition  

SciTech Connect

The K-25 building is a former gaseous diffusion plant, built in 1944-1945 as part of the United States Manhattan Project. The structure was the largest structure under one roof, surpassed only by the Pentagon. Together the three wings represent about 17.8 hectare (44 acres) under roof and are generally about 18.3 meters (60 ft.) high on the outside face and approximately 12.2 meters (40 ft.) high on the inside face. The entire structure was built in the shape of a 'U', with a lateral distance of approximately one mile. It was constructed in individual building units with each unit connected using expansion joint-type connection. A single unit is approximately 24.4 meters (80 ft.) across and 122 meters (400 ft.) deep. The northern structure is connected to the eastern and western structures at the upper level floors. The four-level, U-shaped building is a steel-frame structure with corrugated cement-asbestos siding. The cell level is an elevated concrete structure supported by reinforced concrete columns located in the basement, or vault area. The vault area can be accessed at grade level from the outside perimeter. Inside the courtyard, the grade level has been raised to provide entry to the second or cell floor level. An engineering evaluation of the structure was performed to determine the condition of the structure and possibility of unplanned collapse of any portion of the structure. The evaluation included physical inspections, calculations for wind, pre-demolition loads, and evaluation of failure modes. The results of the evaluation have provided guidance for the demolition plan and the development of criteria for protection of personnel performing pre-demolition activities. Challenges include degradation of the structure that necessitated repair, dealing with changes in the code revisions from both the American Concrete Institute (ACI) and the American Institute of Steel Construction (AISC), access to areas of the structure that were not necessarily designed for access, and acceleration of the building degradation due to the pre-demolition activities. When a full building is evaluated, 50 percent of wind and applied forces are dissipated in 3 units and 80 percent is dissipated in 12 units. The forces are basically linear for the first 6 units once the building is opened at the start of demolition. Some column buckling, based on current codes, was noted in the analysis that would have to be mitigated to ensure a controlled demolition. Loading for the removal of the equipment required structural engineering evaluation of the certainty of the load and the application of the load. Corbels are being evaluated through an inspection program and criteria for repair based on current loading and anticipated additional live loads. Access issues continue to be a challenge and have created the need for a significant fall protection program. Other areas of access require different approaches and engineering solutions, sometime considering ultimate strength design versus standard yield stress design. An evaluation of separating a wing into two sections to allow for worker re-entry to perform pre-demolition activities during the demolition off shift was conducted. The evaluation has shown that because of both design and history of the K-25 and K-27 Buildings, significant care and attention is needed to demolish these structures from a structural perspective. When the project schedule issues are overlaid, that may demand workers in other parts of the structure after demolition has begun, the structural issues become severe, demanding exacting analysis and significant controls to ensure the safety of the workers both in and outside the building performing the demolition work.

Cater, Frank [Bechtel Jacobs Company, LLC, East Tennessee Technology Park, Post Office Box 4699, Oak Ridge, TN 37831 (United States)

2008-01-15T23:59:59.000Z

12

Oak Ridge K-25 Site Technology Logic Diagram  

SciTech Connect

The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. This Volume, Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This volume is divided into ten chapters. The first chapter is a brief introduction, and the second chapter details the technical approach of the TLD. These categories are the work activities necessary for successful decontamination and decommissioning, waste management, and remedial action of the K-25 Site. The categories are characterization, decontamination, dismantlement, robotics and automation, remedial action, and waste management. Materials disposition is addressed in Chap. 9. The final chapter contains regulatory compliance information concerning waste management, remedial action, and decontamination and decommissioning.

Fellows, R.L. (ed.)

1993-02-26T23:59:59.000Z

13

Energy Department Completes K-25 Gaseous Diffusion Building Demolition |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Department Completes K-25 Gaseous Diffusion Building Energy Department Completes K-25 Gaseous Diffusion Building Demolition Energy Department Completes K-25 Gaseous Diffusion Building Demolition December 19, 2013 - 12:00pm Addthis K-25 Demolition - Oak Ridge 2013 K-25 Demolition - Oak Ridge 2013 Media Contacts Ben Williams, DOE, (865) 574-4912 Wayne McKinney, UCOR, (865) 576-6284 Oak Ridge, Tenn. - Today, the Department of Energy announced that its contractor URS|CH2M Oak Ridge, LLC, or UCOR, has completed demolition of the K-25 gaseous diffusion building, the largest facility in the DOE complex. UCOR took over the project in 2011 and has maintained a strong safety record while completing the demolition over one year ahead of its current schedule and approximately $300 million under the current budget. All debris removal is expected to be completed in spring 2014.

14

K-25 Gaseous Diffusion Process Building | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Operational Management » History » Manhattan Project » Signature Operational Management » History » Manhattan Project » Signature Facilities » K-25 Gaseous Diffusion Process Building K-25 Gaseous Diffusion Process Building K-25 Gaseous Diffusion Process Building The K-25 plant, located on the southwestern end of the Oak Ridge reservation, used the gaseous diffusion method to separate uranium-235 from uranium-238. Based on the well-known principle that molecules of a lighter isotope would pass through a porous barrier more readily than molecules of a heavier one, gaseous diffusion produced through myriads of repetitions a gas increasingly rich in uranium-235 as the heavier uranium-238 was separated out in a system of cascades. Although producing minute amounts of final product measured in grams, gaseous diffusion required a massive

15

Oak Ridge K-25 Site Technology Logic Diagram  

Science Conference Proceedings (OSTI)

The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This report is part A of Volume 3 concerning characterization, decontamination, and dismantlement.

Fellows, R.L. (ed.)

1993-02-26T23:59:59.000Z

16

DOE Begins Demoltion on K-25s East Wing  

Energy.gov (U.S. Department of Energy (DOE))

DOE begins demolition of Building K-25s east wing. The former uranium enrichment facility, located at ETTP, was once the worlds largest building under one roof, covering more than 44 acres. The project is one of DOEs highest EM priorities in Oak Ridge and an integral component to completing cleanup of ETTP.

17

Oak Ridge K-25 Site Technology Logic Diagram  

SciTech Connect

The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration (ER) and waste management (WN) problems at the Oak Ridge K-25 Site. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remediation, decontamination, and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This volume 3 B provides the Technology Evaluation Data Sheets (TEDS) for ER/WM activities (Remedial Action Robotics and Automation, Waste Management) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than each technology in Vol. 2. The TEDS are arranged alphanumerically by the TEDS code number in the upper right corner of each data sheet. Volume 3 can be used in two ways: (1) technologies that are identified from Vol. 2 can be referenced directly in Vol. 3 by using the TEDS codes, and (2) technologies and general technology areas (alternatives) can be located in the index in the front of this volume.

Fellows, R.L. (ed.)

1993-02-26T23:59:59.000Z

18

Oak Ridge EM Program Completes K-25 North End Demolition | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EM Program Completes K-25 North End Demolition EM Program Completes K-25 North End Demolition Oak Ridge EM Program Completes K-25 North End Demolition January 23, 2013 - 12:00pm Addthis Employees with the K-25 demolition team gather for a photo following the completion of demolition of the north end of the K-25 Building today. Employees with the K-25 demolition team gather for a photo following the completion of demolition of the north end of the K-25 Building today. A view of the north end of the K-25 Building moments before it was demolished today. A view of the north end of the K-25 Building moments before it was demolished today. Workers tear down the remaining structure of the K-25 North End this morning. Workers tear down the remaining structure of the K-25 North End this morning. Workers completed the demolition of the north end of the K-25 Building today.

19

Oak Ridge Finds Ways to Remove K-25 Faster, Cheaper | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Finds Ways to Remove K-25 Faster, Cheaper Finds Ways to Remove K-25 Faster, Cheaper Oak Ridge Finds Ways to Remove K-25 Faster, Cheaper February 1, 2012 - 12:00pm Addthis Oak Ridge Finds Ways to Remove K-25 Faster, Cheaper Oak Ridge Finds Ways to Remove K-25 Faster, Cheaper Oak Ridge Finds Ways to Remove K-25 Faster, Cheaper Oak Ridge Finds Ways to Remove K-25 Faster, Cheaper OAK RIDGE, Tenn. - K-25, once the world's largest building under one roof, reflects less of its former title every day. Due to the partnership between the U.S Department of Energy (DOE) Office of Environmental Management (EM) cleanup team and Oak Ridge's prime environmental management contractor, URS | CH2M Oak Ridge, LLC (UCOR), the 44-acre, multi-level uranium-enrichment superstructure is in the advanced stages of demolition.

20

Commemorating the Historical Contributions of the K-25 Site in Tennessee |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commemorating the Historical Contributions of the K-25 Site in Commemorating the Historical Contributions of the K-25 Site in Tennessee Commemorating the Historical Contributions of the K-25 Site in Tennessee September 21, 2012 - 10:14am Addthis The 44-acre K-25 superstructure made significant historical contributions during its years of operation. | Photo credit Oak Ridge Office photographer Lynn Freeny. The 44-acre K-25 superstructure made significant historical contributions during its years of operation. | Photo credit Oak Ridge Office photographer Lynn Freeny. Erin Szulman Erin Szulman Special Assistant, Office of Environmental Management What are the key facts? A multi-year plan is in place to commemorate Oak Ridge's K-25 complex. The new agreement will turn the property into an industrial park for future economic development.

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Manhattan Project: The Navy and Thermal Diffusion, 1944  

Office of Scientific and Technical Information (OSTI)

Diffusion columns, S-50 Thermal Diffusion Plant, Oak Ridge, 1945. THE NAVY AND THERMAL DIFFUSION Diffusion columns, S-50 Thermal Diffusion Plant, Oak Ridge, 1945. THE NAVY AND THERMAL DIFFUSION (Oak Ridge: Clinton, 1944) Events > The Uranium Path to the Bomb, 1942-1944 Y-12: Design, 1942-1943 Y-12: Construction, 1943 Y-12: Operation, 1943-1944 Working K-25 into the Mix, 1943-1944 The Navy and Thermal Diffusion, 1944 As problems with both Y-12 and K-25 reached crisis proportions in spring and summer 1944, the Manhattan Project received help from an unexpected source: the United States Navy. President Roosevelt had instructed that the atomic bomb effort be an Army program and that the Navy be excluded from deliberations. Navy research on atomic power, conducted primarily for submarines, received no direct aid from Leslie Groves, who, in fact, was not up-to-date on the state of Navy efforts when he received a letter on the subject from Robert Oppenheimer late in April 1944.

22

Manhattan Project: The Uranium Path to the Bomb, 1942-1944  

Office of Scientific and Technical Information (OSTI)

Alpha Racetrack, Y-12 Electromagnetic Plant, Oak Ridge THE URANIUM PATH TO THE BOMB Alpha Racetrack, Y-12 Electromagnetic Plant, Oak Ridge THE URANIUM PATH TO THE BOMB (1942-1944) Events > The Uranium Path to the Bomb, 1942-1944 Y-12: Design, 1942-1943 Y-12: Construction, 1943 Y-12: Operation, 1943-1944 Working K-25 into the Mix, 1943-1944 The Navy and Thermal Diffusion, 1944 The uranium path to the atomic bomb ran through Oak Ridge, Tennessee. Only if the new plants built at Oak Ridge produced enough enriched uranium-235 would a uranium bomb be possible. General Groves placed two methods into production: 1) electromagnetic, based on the principle that charged particles of the lighter isotope would be deflected more when passing through a magnetic field; and 2) gaseous diffusion, based on the principle that molecules of the lighter isotope, uranium-235, would pass more readily through a porous barrier. Full-scale electromagnetic and gaseous diffusion production plants were built at Oak Ridge at sites designated as "Y-12" and "K-25", respectively.

23

Oak Ridge Commemorates Past, Moves Forward with Cleanup of Historic K-25  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Oak Ridge Commemorates Past, Moves Forward with Cleanup of Historic Oak Ridge Commemorates Past, Moves Forward with Cleanup of Historic K-25 Site Oak Ridge Commemorates Past, Moves Forward with Cleanup of Historic K-25 Site August 1, 2012 - 12:00pm Addthis Workers near completion of the non-technetium area of K-25’s east wing (left). Oak Ridge anticipates beginning demolition on the North Tower (right) by October. Workers near completion of the non-technetium area of K-25's east wing (left). Oak Ridge anticipates beginning demolition on the North Tower (right) by October. OAK RIDGE, Tenn. - Representatives from federal, state, and local historic preservation groups gathered earlier this month to celebrate the formal completion of an agreement that preserves the historic contributions of Oak Ridge's K-25 site to the Manhattan Project and Cold War.

24

Oak Ridge Commemorates Past, Moves Forward with Cleanup of Historic K-25  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commemorates Past, Moves Forward with Cleanup of Historic Commemorates Past, Moves Forward with Cleanup of Historic K-25 Site Oak Ridge Commemorates Past, Moves Forward with Cleanup of Historic K-25 Site August 1, 2012 - 12:00pm Addthis Workers near completion of the non-technetium area of K-25’s east wing (left). Oak Ridge anticipates beginning demolition on the North Tower (right) by October. Workers near completion of the non-technetium area of K-25's east wing (left). Oak Ridge anticipates beginning demolition on the North Tower (right) by October. OAK RIDGE, Tenn. - Representatives from federal, state, and local historic preservation groups gathered earlier this month to celebrate the formal completion of an agreement that preserves the historic contributions of Oak Ridge's K-25 site to the Manhattan Project and Cold War.

25

Department of Energy Begins Demolition on K-25's East Wing - Moves closer  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Department of Energy Begins Demolition on K-25's East Wing - Moves Department of Energy Begins Demolition on K-25's East Wing - Moves closer to completing Oak Ridge's largest cleanup project Department of Energy Begins Demolition on K-25's East Wing - Moves closer to completing Oak Ridge's largest cleanup project July 21, 2011 - 12:00pm Addthis Media Contact Ben Williams http://www.oakridge.doe.gov 865-576-0885 OAK RIDGE, Tenn. - Earlier today, the U.S. Department of Energy (DOE) began the demolition of Building K-25's east wing. The former uranium enrichment facility, located at the East Tennessee Technology Park (ETTP), was once the world's largest building under one roof, covering more than 44 acres. The project is one of DOE's highest Environmental Management (EM) priorities in Oak Ridge and an integral component to completing

26

Oak Ridge K-25 Gaseous Diffusion Plant, Former Production Workers Screening  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

K-25 Gaseous Diffusion Plant, Former Production Workers K-25 Gaseous Diffusion Plant, Former Production Workers Screening Projects Oak Ridge K-25 Gaseous Diffusion Plant, Former Production Workers Screening Projects Project Name: Worker Health Protection Program Covered DOE Site: K-25 Worker Population Served: Production Workers Principal Investigator: Jim Frederick Co-Principal Investigator: Steven Markowitz, MD Toll-free Telephone: (888) 241-1199 Local Outreach Office: Bruce Lawson 133 Raleigh Road Oak Ridge, TN 37830 Local Medical Clinics: ParkMed 110 S. Illinois Avenue Oak Ridge, TN 37380 Website: http://www.worker-health.org/ This project is conducted by the United Steelworkers in conjunction with Queens College of the City University of New York. The program is being offered as a service to both former and current workers. Free of charge,

27

AEC and changes at Y-12, K-25, and X-10  

NLE Websites -- All DOE Office Websites (Extended Search)

capacity and greater economy. By the end of 1946, K-25 was ready to assume the entire uranium enrichment effort as it could do so at a much more economical fashion than could...

28

Time on the Mountain: The Office of Strategic Services in Axis-Occupied Greece, 1943-1944.  

E-Print Network (OSTI)

??Using the wartime reports produced by various field agents of the Office of Strategic Services (OSS), this dissertation attempts to rebut the currently hegemonic notion (more)

Nalmpantis, Kyriakos

2010-01-01T23:59:59.000Z

29

Manhattan Project: Y-12 Construction, 1943  

Office of Scientific and Technical Information (OSTI)

Groundbreaking for Y-12, Oak Ridge Y-12: CONSTRUCTION Groundbreaking for Y-12, Oak Ridge Y-12: CONSTRUCTION (Oak Ridge: Clinton, 1943) Events > The Uranium Path to the Bomb, 1942-1944 Y-12: Design, 1942-1943 Y-12: Construction, 1943 Y-12: Operation, 1943-1944 Working K-25 into the Mix, 1943-1944 The Navy and Thermal Diffusion, 1944 Groundbreaking for the Alpha plant of the Y-12 Electromagnetic Plant took place at Oak Ridge on February 18, 1943 (right). Soon blueprints could not be produced fast enough to keep up with construction as Stone & Webster labored to meet Leslie Groves's deadline. The Beta facility was actually begun before formal authorization. While laborers were aggressively recruited, there was always a shortage of workers skilled Y-12 construction, Oak Ridge enough to perform jobs according to the rigid specifications. (A further complication was that some tasks could be performed only by workers with security clearances.) Huge amounts of material had to be obtained (38 million board feet of lumber, for instance), and the magnets needed so much copper for windings that the Army had to borrow almost 15,000 tons of silver bullion from the United States Treasury to fabricate into strips and wind on to coils as a substitute for copper. Treasury silver was also used to manufacture the busbars that ran around the top of the racetracks.

30

Natural phenomena evaluations of the K-25 site UF{sub 6} cylinder storage yards  

Science Conference Proceedings (OSTI)

The K-25 Site UF{sub 6} cylinder storage yards are used for the temporary storage of UF{sub 6} normal assay cylinders and long-term storage of other UF{sub 6} cylinders. The K-25 Site UF{sub 6} cylinder storage yards consist of six on-site areas: K-1066-B, K-1066-E, K-1066-F, K-1066-J, K-1066-K and K-1066-L. There are no permanent structures erected on the cylinder yards, except for five portable buildings. The operating contractor for the K-25 Site is preparing a Safety Analysis Report (SAR) to examine the safety related aspects of the K-25 Site UF{sub 6} cylinder storage yards. The SAR preparation encompasses many tasks terminating in consequence analysis for the release of gaseous and liquid UF{sub 6}, one of which is the evaluation of natural phenomena threats, such as earthquakes, floods, and winds. In support of the SAR, the six active cylinder storage yards were evaluated for vulnerabilities to natural phenomena, earthquakes, high winds and tornados, tornado-generated missiles, floods (local and regional), and lightning. This report summarizes those studies. 30 refs.

Fricke, K.E.

1996-09-15T23:59:59.000Z

31

Routine environmental audit of the K-25 Site, Oak Ridge, Tennessee  

Science Conference Proceedings (OSTI)

This report documents the results of the Routine Environmental Audit of the K-25 Site in Oak Ridge, Tennessee, conducted February 14 through February 25, 1994, by the US Department of Energy`s (DOE`s) Office of Environmental Audit (EH-24) located within the Office of Environment, Safety and Health (EH). The Routine Environmental Audit for the K-25 site was conducted as an environmental management assessment, supported through reviews of the Waste Management Program and the Decontamination and Decommissioning Program. The assessment was conducted jointly with, and built upon, the results provided by the ``DOE Oak Ridge Operations Office Environment, Safety, health and Quality Assurance Appraisal at the K-25 Site.`` DOE 5482.1B, ``Environment, Safety and Health Appraisal Program,`` established the mission of EH-24 to provide comprehensive, independent oversight of Department-wide environmental programs on behalf of the Secretary of Energy. The purpose of this assessment is to provide the Secretary of Energy and senior DOE managers with concise independent information as part of DOE`s continuing effort to improve environmental program performance. The ultimate goal of EH-24 is enhancement of environmental protection and the minimization of risk to public health and the environment. The routine environmental audit is one method by which EH-24 accomplishes its mission, utilizing systematic and periodic evaluations of the Department`s environmental programs within line organizations.

Not Available

1994-02-01T23:59:59.000Z

32

Site descriptions of environmental restoration units at the Oak Ridge K-25 Site, Oak Ridge, Tennessee  

SciTech Connect

This report, Site Descriptions of Environmental Restoration Units at the Oak Ridge K-25 Site, Oak Ridge, Tennessee, is being prepared to assimilate information on sites included in the Environmental Restoration (ER) Program of the K-25 Site, one of three major installations on the Oak Ridge Reservation (ORR) built during World War III as part of the Manhattan Project. The information included in this report will be used to establish program priorities so that resources allotted to the K-25 ER Program can be best used to decrease any risk to humans or the environment, and to determine the sequence in which any remedial activities should be conducted. This document will be updated periodically in both paper and Internet versions. Units within this report are described in individual data sheets arranged alphanumerically. Each data sheet includes entries on project status, unit location, dimensions and capacity, dates operated, present function, lifecycle operation, waste characteristics, site status, media of concern, comments, and references. Each data sheet is accompanied by a photograph of the unit, and each unit is located on one of 13 area maps. These areas, along with the sub-area, unit, and sub-unit breakdowns within them, are outlined in Appendix A. Appendix B is a summary of information on remote aerial sensing and its applicability to the ER program.

Goddard, P.L.; Legeay, A.J.; Pesce, D.S.; Stanley, A.M.

1995-11-01T23:59:59.000Z

33

Mesoscopic structural analysis of bedrock exposures at the Oak Ridge K-25 Site, Oak Ridge, Tennessee  

SciTech Connect

This document presents the detailed study of outcrop of mesoscopic structures during the geologic mapping completed in 1992-1993. The purpose of this study was to document the geometry and style of outcrop scale structures, such as fractures and faults and relate them to map scale structures present in the Oak Ridge K-25 Area. This report was prepared to document site characterization data collected during the scoping phase investigations in accordance with the requirements of the Comprehensive Environmental Response, Compensation, and Liability Act.

Lemiszki, P.J. [Oak Ridge K-25 Site, TN (United States)

1995-07-01T23:59:59.000Z

34

In-Situ Measurements of Low Enrichment Uranium Holdup Process Gas Piping at K-25 - Paper for Waste Management Symposia 2010 East Tennessee Technology Park Oak Ridge, Tennessee  

SciTech Connect

This document is the final version of a paper submitted to the Waste Management Symposia, Phoenix, 2010, abstract BJC/OR-3280. The primary document from which this paper was condensed is In-Situ Measurement of Low Enrichment Uranium Holdup in Process Gas Piping at K-25 Using NaI/HMS4 Gamma Detection Systems, BJC/OR-3355. This work explores the sufficiency and limitations of the Holdup Measurement System 4 (HJVIS4) software algorithms applied to measurements of low enriched uranium holdup in gaseous diffusion process gas piping. HMS4 has been used extensively during the decommissioning and demolition project of the K-25 building for U-235 holdup quantification. The HMS4 software is an integral part of one of the primary nondestructive assay (NDA) systems which was successfully tested and qualified for holdup deposit quantification in the process gas piping of the K-25 building. The initial qualification focused on the measurement of highly enriched UO{sub 2}F{sub 2} deposits. The purpose of this work was to determine if that qualification could be extended to include the quantification of holdup in UO{sub 2}F{sub 2} deposits of lower enrichment. Sample field data are presented to provide evidence in support of the theoretical foundation. The HMS4 algorithms were investigated in detail and found to sufficiently compensate for UO{sub 2}F{sub 2} source self-attenuation effects, over the range of expected enrichment (4-40%), in the North and East Wings of the K-25 building. The limitations of the HMS4 algorithms were explored for a described set of conditions with respect to area source measurements of low enriched UO{sub 2}F{sub 2} deposits when used in conjunction with a 1 inch by 1/2 inch sodium iodide (NaI) scintillation detector. The theoretical limitations of HMS4, based on the expected conditions in the process gas system of the K-25 building, are related back to the required data quality objectives (DQO) for the NBA measurement system established for the K-25 demolition project. The combined review of the HMS software algorithms and supporting field measurements lead to the conclusion that the majority of process gas pipe measurements are adequately corrected for source self-attenuation using HMS4. While there will be instances where the UO{sub 2}F{sub 2} holdup mass presents an infinitely thick deposit to the NaI-HMS4 system these situations are expected to be infrequent. This work confirms that the HMS4 system can quantify UO{sub 2}F{sub 2} holdup, in its current configuration (deposition, enrichment, and geometry), below the DQO levels for the K-25 building decommissioning and demolition project. For an area measurement of process gas pipe in the K-25 building, if an infinitely thick UO{sub 2}F{sub 2} deposit is identified in the range of enrichment of {approx}4-40%, the holdup quantity exceeds the corresponding DQO established for the K-25 building demolition project.

Rasmussen B.

2010-01-01T23:59:59.000Z

35

Manhattan Project: DuPont and Hanford, Hanford Engineer Works, 1942  

Office of Scientific and Technical Information (OSTI)

The president of DuPont, Walter Carpenter, with Generals Levin H. Campbell, Everett Hughes, and Charles T. Harris. DUPONT AND HANFORD The president of DuPont, Walter Carpenter, with Generals Levin H. Campbell, Everett Hughes, and Charles T. Harris. DUPONT AND HANFORD (Hanford Engineer Works, 1942) Events > The Plutonium Path to the Bomb, 1942-1944 Production Reactor (Pile) Design, 1942 DuPont and Hanford, 1942 CP-1 Goes Critical, December 2, 1942 Seaborg and Plutonium Chemistry, 1942-1944 Final Reactor Design and X-10, 1942-1943 Hanford Becomes Operational, 1943-1944 The scientists of the Met Lab had the technical expertise to design a production pile, but construction and management on an industrial scale required an outside contractor. The DuPont Corporation was an ideal candidate, but the giant chemical firm was hesitant to join the project due to concern over accusations that it had profiteered during World War I. On October 3, 1942, DuPont agreed to design and build the chemical separation plant for the production pile facility then planned for Oak Ridge. Leslie Groves tried to entice further DuPont participation by having the firm prepare an appraisal of the pile (reactor) project and by placing three DuPont staff members on the Lewis Committee. DuPont ultimately agreed to become the primary contractor for plutonium-related work, but because of continuing sensitivity about its public image its contract called for a total payment of only dollar over actual costs. In addition, DuPont vowed to stay out of the bomb business after the war and offered all patents to the United States government.

36

Pollution prevention opportunity assessment for the K-25 Site Steam Plant -- Level 3  

SciTech Connect

A Level 3 pollution prevention opportunity assessment (PPOA) was performed for the K-1501 Steam Plant at the K-25 Site. The primary objective was to identify and evaluate pollution prevention (P2) options to reduce the quantities of each waste stream generated by the Steam Plant. For each of the waste streams, P2 options were evaluated to first reduce the quantity of waste generated and second to recycle the waste. This report provides a process description of the facility; identification, evaluation, and recommendations of P2 options; an implementation schedule with funding sources; and conclusions. Largely for economic reasons, only 3 of the 14 P2 options are being recommended for implementation. All are source reduction options. When implemented, these three options are estimated to reduce the annual generation of waste by 658,412 kg and will result in a cost savings of approximately $29,232/year for the K-25 Site. The recommended options are to: install a flue gas return System in Boiler 7; reduce steam loss from traps; and increase lapse time between rinses. The four boilers currently in operation at the Steam Plant use natural gas or fuel oil as fuel sources.

NONE

1995-09-01T23:59:59.000Z

37

Characterization of ventilation ductwork in Building K-33 at the Oak Ridge K-25 Site  

Science Conference Proceedings (OSTI)

An extensive sampling and analysis program was initiated in September 1991 to characterize the ductwork of Building K-33, which is located at the Oak Ridge K-25 Site. This building, 32.4 acres under roof, contains nearly 3 miles of main plenums without considering the side laterals, which are extensive. A large number (i.e., 131) of hexane-moistened wipe samples were taken from within randomly selected locations in the 16 main plenums and the side lateral network. Samples were analyzed for polychlorinated biphenyls (PCBs), uranium, and technetium. These samples were augmented by 5 bulk material and 13 metal coupon samples that were subjected to TCLP (Toxicity Characteristic Leaching Procedure) analyses for arsenic, barium, cadmium, chromium, lead, nickel, selenium, silver, and mercury.

Mrochek, J.E.

1992-05-01T23:59:59.000Z

38

Oak Ridge K-25 Site Technology Logic Diagram. Volume 3, Technology evaluation data sheets; Part A, Characterization, decontamination, dismantlement  

Science Conference Proceedings (OSTI)

The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration and waste management problems at the Oak Ridge K-25 Site to potential technologies that can remediate these problems. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remedial action, and decontamination and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This report is part A of Volume 3 concerning characterization, decontamination, and dismantlement.

Fellows, R.L. [ed.

1993-02-26T23:59:59.000Z

39

Manhattan Project: Y-12: Design, 1942-1943  

Office of Scientific and Technical Information (OSTI)

Ernest Lawrence slumps in his chair from fatigue in front of a cyclotron control panel while conducting calutron-related experiments, Berkeley, 1943. Y-12: DESIGN Ernest Lawrence slumps in his chair from fatigue in front of a cyclotron control panel while conducting calutron-related experiments, Berkeley, 1943. Y-12: DESIGN (Oak Ridge: Clinton, 1942-1943) Events > The Uranium Path to the Bomb, 1942-1944 Y-12: Design, 1942-1943 Y-12: Construction, 1943 Y-12: Operation, 1943-1944 Working K-25 into the Mix, 1943-1944 The Navy and Thermal Diffusion, 1944 Although the Lewis Report had placed gaseous diffusion ahead of the electromagnetic approach, many were still betting in early 1943 that Ernest Lawrence (right) and his "calutron" would eventually predominate. Lawrence and his laboratory of mechanics at the University of California, Berkeley, continued to experiment with the giant 184-inch cyclotron magnet, trying to reach a consensus on which shims, sources, and Electromagnetic method for the enrichment of uranium collectors to incorporate into the Y-12 Electromagnetic Plant that was to be built at Oak Ridge. Research on magnet size and placement and beam resolution led Lawrence and his group in fall 1942 to propose an arrangement of huge electromagnetic coils connected by a bus bar in an oval racetrack configuration, as seen from above. Forty-eight gaps in the racetrack between the coils would each contain two vacuum tanks. With two racetracks per building, ten buildings would be necessary to provide the estimated 2,000 sources and collectors needed to separate 100 grams of uranium-235 daily. The Berkeley researchers hoped that improvements in calutron design, or placing multiple sources and collectors in each tank, might increase efficiency and reduce the number of tanks and buildings required, but experimental results were inconclusive even as Stone & Webster of Boston, the Y-12 contractor at Oak Ridge, prepared to break ground.

40

Manhattan Project: Oak Ridge and Hanford Come Through, 1944-1945  

Office of Scientific and Technical Information (OSTI)

Y-12 Plant, Oak Ridge, 1944 OAK RIDGE AND HANFORD COME THROUGH Y-12 Plant, Oak Ridge, 1944 OAK RIDGE AND HANFORD COME THROUGH (Oak Ridge [Clinton] and Hanford, 1944-1945) Events > Bringing It All Together, 1942-1945 Establishing Los Alamos, 1942-1943 Early Bomb Design, 1943-1944 Basic Research at Los Alamos, 1943-1944 Implosion Becomes a Necessity, 1944 Oak Ridge and Hanford Come Through, 1944-1945 Final Bomb Design, 1944-1945 Atomic Rivals and the ALSOS Mission, 1938-1945 Espionage and the Manhattan Project, 1940-1945 None of Los Alamos's bomb design work would be of any use if Oak Ridge or Hanford did not come through with enough uranium-235 or plutonium for at least one bomb. Spending on the Manhattan Project reached $100 million per month by mid-1944, yet it was still far from clear that enough of either fissionable substance could be produced before war's end. In the summer of 1944, Oak Ridge's Y-12 Electromagnetic Plant (above) was plagued by operational problems, and the ongoing barrier crisis at the K-25 Gaseous Diffusion Plant threatened to render it useless. At Hanford, the first production reactor had not yet been completed. In addition, officials feared that not enough of the uranium-containing slugs to feed the pile would be available. Even assuming that enough uranium or plutonium could be delivered by Oak Ridge or Hanford, there was no guarantee that the Los Alamos laboratory would be able to design and fabricate weapons in time. Only the most optimistic in the Manhattan Project would have predicted, as Groves did when he met with Marshall in August of 1944, that a bomb or bombs powerful enough to make a difference in the current war would be ready by August 1, 1945.

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Third report on the Oak Ridge K-25 Site Biological Monitoring and Abatement Program for Mitchell Branch  

Science Conference Proceedings (OSTI)

As a condition of the modified National Pollutant Discharge Elimination System (NPDES) permit issued to the Oak Ridge Gaseous Diffusion Plant (ORGDP; now referred to as the Oak Ridge K-25 Site) on September 11, 1986, a Biological Monitoring and Abatement Program (BMAP) was developed for the receiving stream (Mitchell Branch or K-1700 stream). On October 1, 1992, a renewed NPDES permit was issued for the K-25 Site. A biological monitoring plan was submitted for Mitchell Branch, Poplar Creek, Poplar Creek Embayment of the Clinch River and any unnamed tributaries of these streams. The objectives of BMAP are to (1) demonstrate that the effluent limitations established for the Oak Ridge K-25 Site protect and maintain the use of Mitchell Branch for growth and propagation of fish and other aquatic life and (2) document the effects on stream biota resulting from operation of major new pollution abatement facilities, including the Central Neutralization Facility (CNF) and the Toxic Substances Control Act (TSCA) incinerator. The BMAP consists of four tasks: (1) toxicity monitoring; (2) bioaccumulation monitoring; (3) assessment of fish health; and (4) instream monitoring of biological communities, including benthic macroinvertebrates and fish. This document, the third in a series, reports on the results of the Oak Ridge K-25 Site BMAP; it describes studies that were conducted over various periods of time between June 1990 and December 1993, although monitoring conducted outside this time period is included, as appropriate.

Hinzman, R.L. [ed.; Adams, S.M.; Ashwood, T.L. [Oak Ridge National Lab., TN (United States)] [and others

1995-08-01T23:59:59.000Z

42

Environmental Management Waste Management Facility Proxy Waste Lot Profile 6.999 for Building K-25 West Wing, East Tennessee Technology Park, Oak Ridge, Tennessee  

SciTech Connect

In 1989, the Oak Ridge Reservation (ORR), which includes the East Tennessee Technology Park (ETTP), was placed on the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) National Priorities List. The Federal Facility Agreement (FFA) (DOE 1992), effective January 1, 1992, now governs environmental restoration activities conducted under CERCLA at the ORR. Following signing of the FFA, U.S. Department of Energy (DOE), U.S. Environmental Protection Agency (EPA), and the state of Tennessee signed the Oak Ridge Accelerated Cleanup Plan Agreement on June 18, 2002. The purpose of this agreement is to define a streamlined decision-making process to facilitate the accelerated implementation of cleanup, resolve ORR milestone issues, and establish future actions necessary to complete the accelerated cleanup plan by the end of fiscal year 2008. While the FFA continues to serve as the overall regulatory framework for remediation, the Accelerated Cleanup Plan Agreement supplements existing requirements to streamline the decision-making process. Decontamination and decommissioning (D&D) activities of Bldg. K-25, the original gaseous diffusion facility, is being conducted by Bechtel Jacobs Company LLC (BJC) on behalf of the DOE. The planned CERCLA action covering disposal of building structure and remaining components from the K-25 building is scheduled as a non-time-critical CERCLA action as part of DOE's continuous risk reduction strategy for ETTP. The K-25 building is proposed for D&D because of its poor physical condition and the expense of surveillance and maintenance activities. The K-25/K-27 D&D Project proposes to dispose of the commingled waste listed below from the K-25 west side building structure and remaining components and process gas equipment and piping at the Environmental Management Waste Management Facility (EMWMF) under waste disposal proxy lot (WPXL) 6.999: (1) Building structure (e.g. concrete floors [excluding basement slab], roofing, structural steel supports, interior walls, and exterior walls) and support system components including the recirculation cooling water (RCW); electrical; communication; fire protection; ventilation; process coolant; process lube oil; utilities such as steam, water and drain lines; (2) Process Piping; (3) Seal Exhaust Headers; (4) Seal Exhaust Traps; (5) Process Valves; (6) Differential Blind Multipliers (DBM)/Partial Blind Multipliers (PBM); and (7) Aftercoolers (also known as Intercell coolers). Converters and compressors while components of the process gas system, are not included in this commingled waste lot. On January 6, 2009, a meeting was held with EPA, TDEC, DOE and the team for the sole purpose of finalizing the objectives, format, and content of WPXL 6.999. The objective of WPXL 6.999 was to provide a crosswalk to the building structure and the PGE components profiles. This was accomplished by providing tables with references to the specific section of the individual profiles for each of the WLs. There are two building profiles and eight PGE profiles. All of the waste identified in the individual profiles will be commingled, shipped, and disposed exclusively under WPXL 6.999. The individual profiles were provided to the EPA and Tennessee Department of Environment and Conservation (TDEC) for information purposes only. This summary WPXL 6.999 will be submitted to EPA, TDEC, and DOE for review and approval. The format agreed upon by the regulators and DOE form the basis for WPXL 6.999. The agreed format is found on pages v and vi of the CONTENTS section of this profile. The disposal of this waste will be executed in accordance with the Action Memorandum for the Decontamination and Decommissioning of the K-25 and K-27 Buildings, East Tennessee Technology Park, Oak Ridge, Tennessee (DOE 2002), Removal Action Work Plan for the K-25 and K-27 Buildings, Process Equipment Removal and Demolition, K-25/K-27 Project, East Tennessee Technology Park, Oak Ridge, Tennessee (DOE 2008a); Waste Handling Plan for Demolition of the K-25 and K-27 Bui

Rigsby V.P.

2009-02-12T23:59:59.000Z

43

First report on the Oak Ridge K-25 Site Biological Monitoring and Abatement Program for Mitchell Branch  

SciTech Connect

A modified National Pollutant Discharge Elimination System permit was issued to the Oak Ridge Gaseous Diffusion Plant (now referred to as the Oak Ridge K-25 Site) on September 11, 1986. The Oak Ridge K-25 Site is a former uranium-enrichment production facility, which is currently managed by Martin Marietta Energy Systems, Inc. for the US Department of Energy. As required in Part III (L) of that permit, a plan for the biological monitoring of Mitchell Branch (K-1700 stream) was prepared and submitted for approval to the US Environmental Protection Agency and the Tennessee Department of Environment and Conservation [formerly the Tennessee Department of Health and Environment (Loar et al. 1992b)]. The K-25 Site Biological Monitoring and Abatement Program (BMAP) described biomonitoring activities that would be conducted over the duration of the permit. Because it was anticipated that the composition of existing effluent streams entering Mitchell Branch would be altered shortly after the modified permit was issued, sampling of the benthic invertebrate and fish communities (Task 4 of BMAP) was initiated in August and September 1986 respectively.

Smith, J.G. [ed.; Adams, S.M.; Kszos, L.A.; Ryon, M.G.; Southworth, G.R.; Loar, J.M.

1993-08-01T23:59:59.000Z

44

Department of Energy Begins Demolition on K-25's East Wing- Moves closer to completing Oak Ridges largest cleanup project  

Energy.gov (U.S. Department of Energy (DOE))

OAK RIDGE, Tenn. - Earlier today, the U.S. Department of Energy (DOE) began the demolition of Building K-25s east wing.

45

Second report on the Oak Ridge K-25 Site Biological Monitoring and Abatement Program for Mitchell Branch  

SciTech Connect

On September 11, 1986, a modified National Pollutant Discharge Elimination System permit was issued for the Oak Ridge Gaseous Diffusion Plant (ORGDP; now referred to as the Oak Ridge K-25 Site), a former uranium-enrichment production facility. As required in Part III of the permit, a Biological Monitoring and Abatement Program (BMAP) was developed for the biological monitoring of Mitchell Branch (K-1700 stream) and submitted for approval to the US EPA and the Tennessee Department of Environment and Conservation. The plan described biomonitoring activities that would be conducted over the duration of the permit. The objectives of the BMAP are to demonstrate that the effluent limitations established for the Oak Ridge K-25 Site protect and maintain the use of Mitchell Branch for growth and propagation of fish and other aquatic life, and to document the effects on stream biota resulting from operation of major new pollution abatement facilities. The BMAP consists of four tasks: ambient toxicity testing; bioaccumulation studies; biological indicator studies; and ecological surveys of stream communities, including benthic macroinvertebrates and fish. This document is the second in a series of reports presenting the results of the studies that were conducted over various periods of time between August 1987 and June 1990.

Smith, J.G. [ed.; Adams, S.M.; Hinzman, R.L.; Kszos, L.A.; Loar, J.M.; Peterson, M.J.; Ryon, M.G.; Southworth, G.R. [Oak Ridge National Lab., TN (United States); Crumby, W.D. [Automated Sciences Group, Inc., Oak Ridge, TN (United States)

1994-03-01T23:59:59.000Z

46

Pollution prevention opportunity assessment for the K-25 Site Toxic Substances Control Act Incinerator Operations, Level III  

SciTech Connect

A Level III pollution prevention opportunity assessment (PPOA) was performed for the Oak Ridge K-25 Site Toxic Substances Control Act (TSCA) Incinerator to evaluate pollution prevention (P2) options for various waste streams: The main objective of this study was to identify and evaluate options to reduce the quantities of each waste stream generated by the TSCA Incinerator operations to realize significant environmental and/or economic benefits from P2. For each of the waste streams, P2 options were evaluated following the US Environmental Protection Agency (EPA) hierarchy to (1) reduce the quantity of waste generated, (2) recycle the waste, and/or (3) use alternate waste treatment or segregation methods. This report provides process descriptions, identification and evaluation of P2 options, and final recommendations.

NONE

1995-09-01T23:59:59.000Z

47

Corrosion monitoring in the UF{sub 6} cylinder yards at the Oak Ridge K-25 Site: FY 1994 report  

Science Conference Proceedings (OSTI)

Depleted uranium hexafluoride (UF{sub 6}) at the U.S. Department of Energy`s K-25 Site at Oak Ridge, Tennessee, has been stored in large steel cylinders that have undergone significant atmospheric corrosion damage over the last 35 years. A detailed experimental program to characterize the corrosion damage was initiated in 1992. Large amounts of corrosion scale and deep pits are found to cover UF{sub 6} cylinder surfaces. Ultrasonic wall thickness measurements have shown uniform corrosion losses up to 20 mils (0.5 mm) and pits up to 100 mils (2.5 mm) deep. Electrical resistance corrosion probes, TOW sensors, and thermocouples have been attached to cylinder bodies. Atmospheric conditions are monitored using rain gauges, relative humidity sensors, and thermocouples. Long-term (16-year) data are being obtained from mild steel corrosion coupons on test racks as well as attached directly to cylinder surfaces. Corrosion rates have been found to be intimately related to the times-of-wetness, both tending to be higher on cylinder tops due to apparent sheltering effects. Data from the various tests are compared, discrepancies are discussed, and a pattern of cylinder corrosion as a function of cylinder position and location is described.

Rao, M. [Midwest Technical Inc., Oak Ridge, TN (United States); Adamski, R.; Broders, J.; Ellis, A.; Freels, D.; Kelley, D.; Phillips, B. [Oak Ridge K-25 Site, TN (United States)

1994-10-01T23:59:59.000Z

48

work  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

THE THE U.S. DEPARTMENT OF ENERGY'S WORKING CAPITAL FUND U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF AUDIT SERVICES OCTOBER 1998 AUDIT REPORT CR-B-99-01 MEMORANDUM FOR THE DIRECTOR, BUSINESS MANAGEMENT STAFF FROM: William S. Maharay Acting Manager, Capital Regional Audit Office, Office of Inspector General SUBJECT: INFORMATION : Audit Report on the Department's Working Capital Fund BACKGROUND The Department established the Working Capital Fund (Fund) in January 1996 as a financial management tool for charging the costs of common services provided at Headquarters to Departmental program offices. The objectives in establishing the Fund were to increase efficiency of the Department's operations, improve management of administrative services

49

Oak Ridge Reservation Volume 2. Records relating to cesium at the K-25 Plant: A guide to record series of the Department of Energy and its contractors  

SciTech Connect

The purpose of this guide is to describe the documents and record series at the K-25 plant that pertain to the handling of waste containing cesium-137 produced as a result of processes to enrich uranium and separate plutonium at the Department of Energy`s (DOE) Oak Ridge National Laboratory (ORNL) and Oak Ride Gaseous Diffusion Plant (ORGDP, called K-25) in Oak Ridge, Tennessee. History Associates Incorporated (HAI) prepared this guide as part of DOE`s Epidemiologic Records Inventory Project, the purpose of which is to verify and conduct inventories of epidemiologic and health-related records at various DOE and DOE contractor sites. This introduction briefly describes the Epidemiologic Records Inventory Project and HAI`s role in it. Specific attention is given to the history of the DOE-Oak Ridge Reservation, the history and development of the K-25 plant, the creation and handling of cesium-contaminated waste, and environmental monitoring efforts at ORNL and K-25 from the late 1940s to the present. This introduction also presents the methodology used to identify the documents and series pertaining to cesium, a discussion of the inventory of these documents, information concerning access to the site and the records, and a description of the arrangement of the chapters.

NONE

1995-02-21T23:59:59.000Z

50

Oak Ridge K-25 Site Technology Logic Diagram. Volume 3, Technology evaluation data sheets; Part B, Remedial action, robotics/automation, waste management  

SciTech Connect

The Oak Ridge K-25 Technology Logic Diagram (TLD), a decision support tool for the K-25 Site, was developed to provide a planning document that relates environmental restoration (ER) and waste management (WN) problems at the Oak Ridge K-25 Site. The TLD technique identifies the research necessary to develop these technologies to a state that allows for technology transfer and application to waste management, remediation, decontamination, and decommissioning activities. The TLD consists of four separate volumes-Vol. 1, Vol. 2, Vol. 3A, and Vol. 3B. Volume 1 provides introductory and overview information about the TLD. Volume 2 contains logic diagrams. Volume 3 has been divided into two separate volumes to facilitate handling and use. This volume 3 B provides the Technology Evaluation Data Sheets (TEDS) for ER/WM activities (Remedial Action Robotics and Automation, Waste Management) that are referenced by a TEDS code number in Vol. 2 of the TLD. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than each technology in Vol. 2. The TEDS are arranged alphanumerically by the TEDS code number in the upper right corner of each data sheet. Volume 3 can be used in two ways: (1) technologies that are identified from Vol. 2 can be referenced directly in Vol. 3 by using the TEDS codes, and (2) technologies and general technology areas (alternatives) can be located in the index in the front of this volume.

Fellows, R.L. [ed.

1993-02-26T23:59:59.000Z

51

Fissible Deposit Characterization at the Former Oak Ridge K-25 Gaseous Diffusion Plant by {sup 252}CF-Source-Driven Measurements  

Science Conference Proceedings (OSTI)

The Deposit Removal Project was undertaken with the support of the U. S. Department of Energy at the East Tennessee Technology Park (ETTP) formerly the Oak Ridge K-25 Site. The project team performed the safe removal of the hydrated uranyl fluoride (UO{sub 2}F{sub 2}) deposits from the K-29 Building of the former Oak Ridge Gaseous Diffusion Plant. The deposits had developed as a result of air leakage into UF{sub 6} gas process pipes; UO{sub 2}F{sub 2} became hydrated by moisture from the air and deposited inside the pipes. The mass, its distribution, and the hydrogen content [that is, the ratio of H to U (H/U)], were the key parameters that controlled the nuclear criticality safety of the deposits. Earlier gamma-ray spectrometry measurements in K-29 had identified the largest deposits in the building. The first and third largest deposits in the building were measured in this program. The first deposit, found in the Unit 2, Cell 7, B-Line Outlet process pipe (called the ''Hockey Stick'') was about 1,300 kg ({+-} 50% uncertainty) at 3.34 wt% {sup 235}U enrichment ({+-}50% uncertainty) and according to the gamma-ray spectroscopy was uniformly distributed. The second deposit (the third-largest deposit in the building), found in the Unit 2, Cell 6, A-Line Outlet process pipe (called the ''Tee-Pipe''), had a uranium deposit estimated to be about 240 kg ({+-} 50% uncertainty) at 3.4 wt % {sup 235}U enrichment ({+-} 20% uncertainty). Before deposit removal activities began, the Deposit Removal Project team needed to survey the inside of the pipes intrusively to assess the nuclear criticality safety of the deposits. Therefore, the spatial distribution of the deposits, the total uranium deposit mass, and the moderation level resulting from hydration of the deposits, all of which affect nuclear criticality safety were required. To perform the task safely and effectively, the Deposit Removal Project team requested that Oak Ridge National Laboratory (ORNL) characterize the two largest deposits with the {sup 252}Cf-source-driven transmission (CFSDT) technique, an active neutron interrogation method developed for use at the Oak Ridge Y-12 Plant to identify nuclear weapons components in containers. The active CFSDT measurement technique uses CFSDT time-of-flight measurements of prompt neutrons and gamma rays from an externally introduced {sup 252}Cf source.

Hannon, T.F.; Mihalczo, J.T.; Mullens, J.A.; Uckan, T.; Valentine, T.E.; Wyatt, M.S.

1998-05-01T23:59:59.000Z

52

Manhattan Project: Emilio Segr, 1954  

Office of Scientific and Technical Information (OSTI)

Emilio Segr, 1954 Events > Bringing It All Together, 1942-1945 > Basic Research at Los Alamos, Los Alamos: Laboratory, 1943-1944 Emilio Segr, 1954...

53

Manhattan Project: Enrico Fermi  

Office of Scientific and Technical Information (OSTI)

Enrico Fermi Events > Bringing it All Together, 1942-1945 > Basic Research at Los Alamos, Los Alamos: Laboratory, 1943-1944 Enrico Fermi...

54

Manhattan Project: Hans Bethe  

Office of Scientific and Technical Information (OSTI)

Hans Bethe Events > Bringing It All Together, 1942-1945 > Basic Research at Los Alamos, Los Alamos: Laboratory, 1943-1944 People > Scientists > Hans Bethe Hans Bethe...

55

Manhattan Project: Production Reactor (Pile) Design, Met Lab, 1942  

Office of Scientific and Technical Information (OSTI)

Schematic of the X-10 Graphite Reactor, Oak Ridge PRODUCTION REACTOR (PILE) DESIGN Schematic of the X-10 Graphite Reactor, Oak Ridge PRODUCTION REACTOR (PILE) DESIGN (Met Lab, 1942) Events > The Plutonium Path to the Bomb, 1942-1944 Production Reactor (Pile) Design, 1942 DuPont and Hanford, 1942 CP-1 Goes Critical, December 2, 1942 Seaborg and Plutonium Chemistry, 1942-1944 Final Reactor Design and X-10, 1942-1943 Hanford Becomes Operational, 1943-1944 By 1942, scientists had established that some of the uranium exposed to radioactivity in a reactor (pile) would eventually decay into plutonium, which could then be separated by chemical means from the uranium. Important theoretical research on this was ongoing, but the work was scattered at various universities from coast to coast. In early 1942, Arthur Compton arranged for all pile research to be moved to the Met Lab at the University of Chicago.

56

Manhattan Project: Bringing it All Together, 1942-1945  

Office of Scientific and Technical Information (OSTI)

Eric Jette, Charles Critchfield, and J. Robert Oppenheimer, Los Alamos BRINGING IT ALL TOGETHER Eric Jette, Charles Critchfield, and J. Robert Oppenheimer, Los Alamos BRINGING IT ALL TOGETHER (1942-1945) Events > Bringing It All Together, 1942-1945 Establishing Los Alamos, 1942-1943 Early Bomb Design, 1943-1944 Basic Research at Los Alamos, 1943-1944 Implosion Becomes a Necessity, 1944 Oak Ridge and Hanford Come Through, 1944-1945 Final Bomb Design, 1944-1945 Atomic Rivals and the ALSOS Mission, 1938-1945 Espionage and the Manhattan Project, 1940-1945 No matter how much enriched uranium and plutonium might be produced at Oak Ridge and Hanford, it would all come to nothing if workable weapon designs could not be developed in time. To this end, in late 1942 Leslie Groves established a bomb research and development laboratory at Los Alamos in the remote mountains of northern New Mexico. The early work at Los Alamos concentrated primarily on defining the problems that needed to be solved. Basic research on a variety of theoretical issues continued throughout 1943. By 1944, it had become clear that, while a simple and reliable "gun-type" design could be used for a uranium bomb, the considerably more complicated implosion method would be required to produce a plutonium weapon. With the successful Leslie Groves and J. Robert Oppenheimer Allied landings in France on "D-Day," June 6, 1944, the war in Europe appeared to be entering its final phase. Germany ceased to be the primary intended target. General Groves and his advisers turned their sights on Japan, and the rush was on to complete the atomic bomb in time to end the war in the Pacific.

57

Manhattan Project: Implosion Becomes a Necessity, Los Alamos, 1944  

Office of Scientific and Technical Information (OSTI)

Implosion IMPLOSION BECOMES A NECESSITY Implosion IMPLOSION BECOMES A NECESSITY (Los Alamos: Laboratory, 1944) Events > Bringing It All Together, 1942-1945 Establishing Los Alamos, 1942-1943 Early Bomb Design, 1943-1944 Basic Research at Los Alamos, 1943-1944 Implosion Becomes a Necessity, 1944 Oak Ridge and Hanford Come Through, 1944-1945 Final Bomb Design, 1944-1945 Atomic Rivals and the ALSOS Mission, 1938-1945 Espionage and the Manhattan Project, 1940-1945 An early implosion experiment, Los Alamos, 1944 Because the gun-type bomb design seemed so simple and practical, Deke Parsons had assigned implosion studies a low priority and placed the emphasis on the more familiar artillery method. Consequently, Seth H. Neddermeyer performed his early implosion tests in relative obscurity. Neddermeyer found it difficult to achieve symmetrical implosions at the low velocities he had achieved. When the Princeton mathematician John von Neumann, a Hungarian refugee, visited Los Alamos late in 1943, he suggested that high-speed assembly and high velocities would prevent predetonation and achieve more symmetrical explosions. A relatively small, subcritical mass could be placed under so much pressure by a symmetrical implosion that an efficient detonation would occur. Less fissionable material would be required, bombs could be ready earlier, and extreme purification of plutonium would be unnecessary. Von Neumann's theories excited Robert Oppenheimer, who assigned Parsons's deputy, George B. Kistiakowsky, the task of perfecting implosion techniques. (Kistiakowsky would later become President Dwight D. Eisenhower's science adviser.) Because Parsons and Neddermeyer did not get along, it was Kistiakowsky who worked with the scientists on the implosion project.

58

Former Worker Medical Screening Program - Oak Ridge K-25 Gaseous...  

NLE Websites -- All DOE Office Websites (Extended Search)

Jim Frederick Co-Principal Investigator: Steven Markowitz, MD Toll-free Telephone: (888) 241-1199 Local Outreach Office: Bruce Lawson 133 Raleigh Road Oak Ridge, TN 37830 Local...

59

Manhattan Project: William S. "Deke" Parsons  

Office of Scientific and Technical Information (OSTI)

Alamos, Los Alamos: Laboratory, 1943-1944 Places > Other Places > Bomb Casing and Drop Test Sites Places > Los Alamos: The Laboratory > S-Site Implosion Facility William S. "Deke"...

60

Working Copy  

NLE Websites -- All DOE Office Websites (Extended Search)

NWP subcontractor personnel work at a number of DOE generator sites where NWP has no direct contractual authority for overall site operations. NWP has therefore negotiated...

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Work Manager  

Science Conference Proceedings (OSTI)

A real-time control system has been developed and deployed nationally to support BTs work management programme. This paper traces the history, system architecture, development, deployment and service aspects of this very large programme. Many ...

G. J. Garwood

1997-01-01T23:59:59.000Z

62

Working Copy  

NLE Websites -- All DOE Office Websites (Extended Search)

1 Effective Date: 11/05/13 WP 12-IS.01-6 Revision 10 Industrial Safety Program - Visitor, Vendor, User, Tenant, and Subcontractor Safety Controls Cognizant Section: Industrial Safety/Industrial Hygiene Approved By: Tom Ferguson Working Copy Industrial Safety Program - Visitor, Vendor, User, Tenant, and Subcontractor Safety Controls WP 12-IS.01-6, Rev. 10 2 TABLE OF CONTENTS CHANGE HISTORY SUMMARY ..................................................................................... 7 ACRONYMS AND ABBREVIATIONS ............................................................................. 8 1.0 INTRODUCTION 1 ............................................................................................... 10 2.0 VISITORS ........................................................................................................... 11

63

Working Copy  

NLE Websites -- All DOE Office Websites (Extended Search)

DOE/WIPP-99-2286 Waste Isolation Pilot Plant Environmental Notification or Reporting Implementation Plan Revision 7 U.S. Department of Energy December 2013 This document supersedes DOE/WIPP-99-2286, Rev. 6. Working Copy Waste Isolation Pilot Plant Environmental Notification or Reporting Implementation Plan DOE/WIPP-99-2286, Rev. 7 2 TABLE OF CONTENTSCHANGE HISTORY SUMMARY .............................................. 3 ACRONYMS AND ABBREVIATIONS ............................................................................ 4 1.0 INTRODUCTION .................................................................................................. 6 2.0 NOTIFICATION OR REPORTING REQUIREMENTS AND COMMITMENTS ..... 7

64

Work Address:  

NLE Websites -- All DOE Office Websites (Extended Search)

BO SAULSBURY BO SAULSBURY Work Address: Home Address: Oak Ridge National Laboratory 12952 Buckley Road National Transportation Research Center Knoxville, TN 37934 Building NTRC-2, Room 118 (865) 288-0750 Oak Ridge, TN 37831-6479 (865) 574-4694 saulsburyjw@ornl.gov Technical Specialties: Land use planning Environmental and socioeconomic impact assessment National Environmental Policy Act (NEPA) project management Vehicle fuel economy Education: 1986 B. A., History (minors in English and Business), The University of Tennessee 1989 M. S., Planning, The University of Tennessee (Thesis title: Land Use Compatibility Planning for Airfield Environs: Intergovernmental Cooperation to Protect Land Users From the Effects of Aircraft Operations)

65

NSLS Work Planning & Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

Work Planning & Controls NSLS Work Planning and Control Procedure Lead Working Guidelines Information on Working in Areas Subject to Radiation from VUV Injection Procedure for...

66

Submitted Work & Work in Preparation - CECM  

E-Print Network (OSTI)

May 23, 2001 ... Submitted Work & Work in Preparation. I. G. Lisle and G. J. Reid, Symmetry Classification Using Invariant Moving Frames, to be submitted.

67

Manhattan Project: Establishing Los Alamos, 1942-1943  

Office of Scientific and Technical Information (OSTI)

Entrance to the Los Alamos "Tech Area" ESTABLISHING LOS ALAMOS Entrance to the Los Alamos "Tech Area" ESTABLISHING LOS ALAMOS (Los Alamos: Laboratory, 1942-1943) Events > Bringing it All Together, 1942-1945 Establishing Los Alamos, 1942-1943 Early Bomb Design, 1943-1944 Basic Research at Los Alamos, 1943-1944 Implosion Becomes a Necessity, 1944 Oak Ridge and Hanford Come Through, 1944-1945 Final Bomb Design, 1944-1945 Atomic Rivals and the ALSOS Mission, 1938-1945 Espionage and the Manhattan Project, 1940-1945 Map of Los Alamos, New Mexico. The final link in the Manhattan Project's far-flung network was the bomb research and development laboratory at Los Alamos, located in the mountains of northern New Mexico. Codenamed "Project Y," the laboratory that designed and fabricated the first atomic bombs began to take shape in spring 1942 when James Conant suggested to Vannevar Bush that the Office of Scientific and Research Development and the Army form a committee to study bomb development. Bush agreed and forwarded the recommendation to Vice President Henry Wallace, Secretary of War Henry Stimson, and General George Marshall (the Top Policy Group). By the time of his appointment in late September, Leslie Groves had orders to set up a committee to study military applications of the bomb. Meanwhile, sentiment was growing among the Manhattan Project scientists that research on the bomb project needed to be better coordinated. Robert Oppenheimer, among others, advocated a central facility where theoretical and experimental work could be conducted according to standard scientific protocols. This would insure accuracy and speed progress. Oppenheimer suggested that the bomb design laboratory operate secretly in an isolated area but allow free exchange of ideas among the scientists on the staff. Groves accepted Oppenheimer's suggestion and began seeking an appropriate location. By the end of the year, they had settled on an unlikely site for the laboratory: an isolated boys' school on a mesa high in the Jemez Mountains (map at left).

68

Work Force Retention Work Group Charter  

Energy.gov (U.S. Department of Energy (DOE))

The Work force Retention Work Group is established to support the Departments critical focus on maintaining a high-performing work force at a time when a significant number of the workers needed to support DOEs national security mission are reaching retirement age.

69

Live Working Resource Center  

Science Conference Proceedings (OSTI)

This report is a summary of work performed in 2008 on the EPRI Live Working Resource Center (LWRC) web site.

2008-12-16T23:59:59.000Z

70

ORISE: Work for Others  

NLE Websites -- All DOE Office Websites (Extended Search)

Institute for Science Education Work for Others The U.S. Department of Energy's (DOE) Work for Others (WFO) program allows the performance of work for non-DOE entities when the...

71

Environmental restoration risk-based prioritization work package planning and risk ranking methodology. Revision 2  

Science Conference Proceedings (OSTI)

This document presents the risk-based prioritization methodology developed to evaluate and rank Environmental Restoration (ER) work packages at the five US Department of Energy, Oak Ridge Field Office (DOE-ORO) sites [i.e., Oak Ridge K-25 Site (K-25), Portsmouth Gaseous Diffusion Plant (PORTS), Paducah Gaseous Diffusion Plant (PGDP), Oak Ridge National Laboratory (ORNL), and the Oak Ridge Y-12 Plant (Y-12)], the ER Off-site Program, and Central ER. This prioritization methodology was developed to support the increased rigor and formality of work planning in the overall conduct of operations within the DOE-ORO ER Program. Prioritization is conducted as an integral component of the fiscal ER funding cycle to establish program budget priorities. The purpose of the ER risk-based prioritization methodology is to provide ER management with the tools and processes needed to evaluate, compare, prioritize, and justify fiscal budget decisions for a diverse set of remedial action, decontamination and decommissioning, and waste management activities. The methodology provides the ER Program with a framework for (1) organizing information about identified DOE-ORO environmental problems, (2) generating qualitative assessments of the long- and short-term risks posed by DOE-ORO environmental problems, and (3) evaluating the benefits associated with candidate work packages designed to reduce those risks. Prioritization is conducted to rank ER work packages on the basis of the overall value (e.g., risk reduction, stakeholder confidence) each package provides to the ER Program. Application of the methodology yields individual work package ``scores`` and rankings that are used to develop fiscal budget requests. This document presents the technical basis for the decision support tools and process.

Dail, J.L.; Nanstad, L.D.; White, R.K.

1995-06-01T23:59:59.000Z

72

Live Working Resource Center  

Science Conference Proceedings (OSTI)

EPRI created the Live Working Resource Center web site to provide utilities the critical information they need to conduct live work safely and efficiently. This report is a summary of work performed in 2007 on the web site. See EPRI's Live Working Resource Center.

2007-11-30T23:59:59.000Z

73

Scientific Working Groups  

Science Conference Proceedings (OSTI)

... TWGDAM 1988). SWGDOG, Scientific Working Group on Dogs and Orthogonal Detection Guidelines, 2004. SWGTOX, Scientific ...

2013-07-10T23:59:59.000Z

74

Manhattan Project: The Plutonium Path to the Bomb, 1942-1944  

Office of Scientific and Technical Information (OSTI)

Painting of CP-1 going critical THE PLUTONIUM PATH TO THE BOMB Painting of CP-1 going critical THE PLUTONIUM PATH TO THE BOMB (1942-1944) Events > The Plutonium Path to the Bomb, 1942-1944 Production Reactor (Pile) Design, 1942 DuPont and Hanford, 1942 CP-1 Goes Critical, December 2, 1942 Seaborg and Plutonium Chemistry, 1942-1944 Final Reactor Design and X-10, 1942-1943 Hanford Becomes Operational, 1943-1944 Plutonium, produced in a uranium-fueled reactor (pile), was the second path taken toward achieving an atomic bomb. Design work on a full-scale plutonium production reactor began at the Met Lab in June 1942. Scientists at the Met Lab had the technical expertise to design a production pile, but construction and management on an industrial scale required an outside contractor. General Groves convinced the DuPont Corporation to become the primary contractor for plutonium production. With input from the Met Lab and DuPont, Groves selected a site at Hanford, Washington, on the Columbia River, to build the full-scale production reactors.

75

Manhattan Project: Seaborg and Plutonium Chemistry, Met Lab, 1942-1944  

Office of Scientific and Technical Information (OSTI)

Glenn T. Seaborg looks through a microscope at the world's first sample of pure plutonium, Met Lab, August 20, 1942. SEABORG AND PLUTONIUM CHEMISTRY Glenn T. Seaborg looks through a microscope at the world's first sample of pure plutonium, Met Lab, August 20, 1942. SEABORG AND PLUTONIUM CHEMISTRY (Met Lab, 1942-1944) Events > The Plutonium Path to the Bomb, 1942-1944 Production Reactor (Pile) Design, 1942 DuPont and Hanford, 1942 CP-1 Goes Critical, December 2, 1942 Seaborg and Plutonium Chemistry, 1942-1944 Final Reactor Design and X-10, 1942-1943 Hanford Becomes Operational, 1943-1944 While the Met Lab labored to make headway on pile (reactor) design, Glenn T. Seaborg (right) and his coworkers were trying to learn enough about transuranium chemistry to ensure that plutonium could be chemically separated from the uranium that would be irradiated in a production pile. Using lanthanum fluoride as a carrier, Seaborg isolated a weighable sample of plutonium in August 1942. At the same time, Isadore Perlman and William J. Knox explored the peroxide method of separation; John E. Willard studied various materials to determine which best adsorbed (gathered on its surface) plutonium; Theodore T. Magel and Daniel K. Koshland, Jr., researched solvent-extraction processes; and Harrison S. Brown and Orville F. Hill performed experiments into volatility reactions. Basic research on plutonium's chemistry continued as did work on radiation and fission products.

76

Electrical Safe Work Practices  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrical Safe Work Practices Electrical Safe Work Practices July 15, 2005 NOTE: Working hot is a last alternative All activities on or near electrically energized systems having live parts shall be conducted in accordance with the limitations and procedures specified in the latest version of NFPA 70E and with the safe work practices and conditions that follow. Only qualified personnel {as defined in NFPA 70E Article 110.6(D)} as authorized by supervisor can perform such work. Safe Work Practices: Know the equipment and potential hazards - Define the scope of work. Submit the scope of work to your supervisor for approval. Analyze the hazards use engineered methods to mitigate hazards. Establish procedures as necessary. Use barricades or other means to prevent unqualified persons crossing approach boundaries.

77

Live Working Resource Forum  

Science Conference Proceedings (OSTI)

This project involves development of a Live Working Resource Forum for documenting common and unique live work practices. It also serves as a repository of lessons learned derived from analysis of live work incidents. This Technical Update report is the design document of the Forum.

2006-12-14T23:59:59.000Z

78

Working Group 7 Summary  

SciTech Connect

The primary subject of working group 7 at the 2012 Advanced Accelerator Concepts Workshop was muon accelerators for a muon collider or neutrino factory. Additionally, this working group included topics that did not fit well into other working groups. Two subjects were discussed by more than one speaker: lattices to create a perfectly integrable nonlinear lattice, and a Penning trap to create antihydrogen.

Nagaitsev S.; Berg J.

2012-06-10T23:59:59.000Z

79

Work/Life Balance  

NLE Websites -- All DOE Office Websites (Extended Search)

Work/Life Balance Work/Life Balance /careers/_assets/images/careers-icon.jpg Work/Life Balance Explore the multiple dimensions of a career at LANL: work with the best minds on the planet in an inclusive environment that is rich in intellectual vitality and opportunities for growth. What our employees say: Health & Wellness "The Lab pays 80 percent of my family's medical premiums with Blue Cross Blue Shield of New Mexico." Retirement & Savings "With the Lab matching my 401K contributions of six percent, I'm making good progress in saving for my retirement." Time Off "Like many of my colleagues here, I work nine hours on most work days so that I can take every other Friday off." Tax Savings "My flexible spending accounts allow me to set aside pre-tax dollars for

80

EPRI Live Working Project  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute (EPRI) has been conducting research in the area of live working for several decades. This research has resulted in a large number of reports and other products. To help users locate the results of EPRIs research in live working, an annual update is prepared containing brief descriptions of the products.BackgroundLive workthe performance of maintenance, construction, or testing on equipment and circuits that ...

2012-09-06T23:59:59.000Z

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Working/Functional Fluids  

Science Conference Proceedings (OSTI)

... power cycle except that it uses an organic working fluid instead of water to allow operation at lower temperatures, including geothermal or solar ...

2012-10-05T23:59:59.000Z

82

Hot Working I - TMS  

Science Conference Proceedings (OSTI)

The conversion of ingot structure to fine equiaxed wrought structure will be ... Special methods to breakdown the difficult-to-work titanium aluminide alloys will ...

83

tchr_work_template  

NLE Websites -- All DOE Office Websites (Extended Search)

are identified and prepared in advance. f. teachers receive advance communication about program logistics. 4. The Teacher's Work Experience a. relates to the scientific and...

84

Department of Energy Begins Demolition on K-25's East Wing -...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and is a credit to our project team." Today's demolition separates the east wing's technetium-99 contaminated area, which accounts for approximately 20 percent of the facility,...

85

STATEMENT OF WORK  

National Nuclear Security Administration (NNSA)

PART III - SECTION J APPENDIX B STATEMENT OF WORK Table of Contents 1.0 General.................................................................................................................... 273 2.0 Laboratory Mission and Scope of Work. ................................................................ 274 3.0 Science & Technology. ........................................................................................... 275 3.1 Defense Programs. .................................................................................................. 276 3.1.1 Stewardship of United States Nuclear Weapons. ................................................ 276 3.1.1.1 Stockpile Certification. .......................................................................................

86

Demonstration testing and evaluation of in situ soil heating. Treatability study work plan (Revision 2)  

SciTech Connect

A Treatability Study planned for the demonstration of the in situ electromagnetic (EM) heating process to remove organic solvents is described in this Work Plan. The treatability study will be conducted by heating subsurface vadose-zone soils in an organic plume adjacent to the Classified Burial Ground K-1070-D located at K-25 Site, Oak Ridge. The test is scheduled to start during the fourth quarter of FY94 and will be completed during the first quarter of FY95. Over the last nine years, a number of Government agencies (EPA, Army, AF, and DOE) and industries sponsored further development and testing of the in situ heating and soil decontamination process for the remediation of soils containing hazardous organic contaminants. In this process the soil is heated in situ using electrical energy. The contaminants are removed from the soil due to enhanced vaporization, steam distillation and stripping. IITRI will demonstrate the EM Process for in situ soil decontamination at K-25 Site under the proposed treatability study. Most of the contaminants of concern are volatile organics which can be removed by heating the soil to a temperature range of 85{degrees} to 95{degrees}C. The efficiency of the treatment will be determined by comparing the concentration of contaminants in soil samples. Samples will be obtained before and after the demonstration for a measurement of the concentration of contaminants of concern. This document is a Treatability Study Work Plan for the demonstration program. The document contains a description of the proposed treatability study, background of the EM heating process, description of the field equipment, and demonstration test design.

Sresty, G.C.

1994-12-30T23:59:59.000Z

87

ORISE: Working with ORISE  

NLE Websites -- All DOE Office Websites (Extended Search)

Oak Ridge Institute for Science Education Oak Ridge Institute for Science Education Working with ORISE If you are interested in learning about how your agency can utilize the capabilities of the Oak Ridge Institute for Science and Education (ORISE) through a Work for Others agreement or a procurement contract, or if you are looking for career opportunities, the following information provides an explanation of how to work with ORISE. If you do not see an option that applies to your needs, please contact ORISE General Information. Work for Others For organizations and agencies that are not affiliated with U.S. Department of Energy (DOE), such groups still have the opportunity to partner with the Oak Ridge Institute for Science and Education (ORISE) through the DOE Work For Others (WFO) program. DOE's WFO program allows ORISE to support

88

Trails Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Trails Working Group Trails Working Group Trails Working Group Our mission is to inventory, map, and prepare historical reports on the many trails used at LANL. Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email The LANL Trails Working Group inventories, maps, and prepares historical reports on the many trails used at LANL. Some of these trails are ancient pueblo footpaths that continue to be used for recreational hiking today. Some serve as quiet and non-motorized alternatives between the Townsite and LANL or between technical areas. The Trails Working Group, established in December 2003, includes representatives from local citizen hiking groups, Los Alamos County, Forest Service, Park Service, Los Alamos National Laboratory and the NNSA Los

89

Interagency Working Groups (IWGs)  

NLE Websites -- All DOE Office Websites (Extended Search)

Interagency Working Groups (IWGs) Print E-mail Interagency Working Groups (IWGs) Print E-mail Interagency Working Groups (IWGs) are the primary USGCRP vehicles for implementing and coordinating research activities within and across agencies. These groups are critical to Program integration and in assessing the Program's progress. The working groups span a wide range of interconnected issues of climate and global change, and address major components of the Earth's environmental and human systems, as well as cross-disciplinary approaches for addressing these issues. IWGs correspond to program functions and are designed to bring agencies together to plan and develop coordinated activities, implement joint activities, and identify and fill gaps in the Program's plans. They allow public officials to communicate with each other on emerging directions within their agencies, on their stakeholder needs, and on best practices learned from agency activities. Together, these functions allow the agencies to work in a more coordinated and effective manner.

90

How Hybrids Work  

NLE Websites -- All DOE Office Websites (Extended Search)

How Hybrids Work How Hybrids Work Diagram of full hybrid vehicle components, including (1) an internal combustion engine, (2) an electric motor, (3) a generator, (4) a power split device, and (5) a high-capacity battery. Flash Animation: How Hybrids Work (Requires Flash 6.0 or higher) HTML Version: How Hybrids Work Hybrid-electric vehicles (HEVs) combine the benefits of gasoline engines and electric motors and can be configured to obtain different objectives, such as improved fuel economy, increased power, or additional auxiliary power for electronic devices and power tools. Some of the advanced technologies typically used by hybrids include Regenerative Braking. The electric motor applies resistance to the drivetrain causing the wheels to slow down. In return, the energy from the

91

Working, Living, and Belonging  

E-Print Network (OSTI)

and Belonging June 28, 2013 Noah D. Zatz, UCLA, and EileenUniversity Press, 1998). Noah D. Zatz, "Working at theUniversity Press, 2012); Noah D. Zatz, "The Impossibility of

Zatz, Noah; Boris, Eileen

2013-01-01T23:59:59.000Z

92

Work Authorization System  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Washington, D.C. DOE O 412.1A Approved: 4-21-05 This directive was reviewed and certified as current and necessary by Susan J. Grant, Director, Office of Management, Budget and Evaluation/Chief Financial Officer, 4-21-05. SUBJECT: WORK AUTHORIZATION SYSTEM 1. OBJECTIVES. To establish a work authorization and control process for work performed by designated site and facility management contractors, and other contractors as determined by the procurement executive, consistent with the budget execution and program evaluation requirements of the Department of Energy's (DOE's) Planning, Programming, Budgeting, and Evaluation process. 2. CANCELLATIONS. DOE O 412.1 Work Authorization System, dated 4-20-99. Cancellation of a directive does not, by itself, modify or otherwise affect any contractual

93

NREL: Working for NREL  

NLE Websites -- All DOE Office Websites (Extended Search)

Working for NREL Working for NREL We're always on the lookout for talented people who believe in our mission and support our values. NREL's inclusive work environment benefits from diversity throughout the organization, values individual differences, and encourages employees to develop and contribute to their full potential. Working for NREL is a challenging and exciting experience for nearly 2,300 staff members of all backgrounds. We offer competitive salaries and excellent benefits. NREL Mission While our cultures and creeds, and lifestyles and languages may differ, we share a common desire to carry out our mission- To develop renewable energy and energy efficiency technologies and practices, To advance related science and engineering, and To transfer knowledge and innovations to address the nation's energy

94

Interview: LaborWorks@NeighborWorks Provides Vermont Contractors...  

NLE Websites -- All DOE Office Websites (Extended Search)

Focus Series LaborWorks@NeighborWorks Provides Vermont Contractors With Help When They Need It NeighborWorks of Western Vermont (NWWVT), a nonprofit home ownership organization...

95

How Fuel Cells Work  

NLE Websites -- All DOE Office Websites (Extended Search)

How Fuel Cells Work How Fuel Cells Work Diagram: How a PEM fuel cell works. 1. Hydrogen fuel is channeled through field flow plates to the anode on one side of the fuel cell, while oxygen from the air is channeled to the cathode on the other side of the cell. 2. At the anode, a platinum catalyst causes the hydrogen to split into positive hydrogen ions (protons) and negatively charged electrons. 3. The Polymer Electrolyte Membrane (PEM) allows only the positively charged ions to pass through it to the cathode. The negatively charged electrons must travel along an external circuit to the cathode, creating an electrical current. 4. At the cathode, the electrons and positively charged hydrogen ions combine with oxygen to form water, which flows out of the cell.

96

ORISE: Work Smart Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

Work Smart Standards Work Smart Standards ORISE Work Smart Standards Set for Environment, Safety, and Health Revision #1, March 21, 2000 Revision #2, Sept. 29, 2000 Revision #3, June 28, 2001 Revision #4, Nov. 9, 2001 Revision #5, Nov. 30, 2001 Revision #6, Jan. 31, 2002 Revision #7, June 28, 2002 Revision #8, Oct. 17, 2002 Revision #9, Nov. 21, 2002 Revision #10, Feb. 28, 2003 Revision #11, May 23, 2003 Revision #12, May 30, 2003 Revision #13, Oct. 30, 2003 Revision #14, Jan. 21, 2004 Revision #15, May 24, 2004 Revision #16, Aug. 17, 2004 Revision #17, Aug. 27, 2004 Revision #18, Oct. 14, 2004 Revision #19, March 28, 2005 Revision #20, May 31, 2005 Revision #21, Aug. 24, 2005 Revision #22, Feb. 17, 2006 Revision #23, March 22, 2006 Revision #24, May 19, 2006 Revision #25, July 26, 2006 Revision #26, Nov. 28, 2006

97

Mon Valley work plan  

Office of Legacy Management (LM)

GWSHP 1.8 GWSHP 1.8 U.S. Department of Energy UMTRA Ground Water Project Work Plan for Characterization Activities at the Shiprock UMTRA Project Site June 1998 Prepared by U.S. Department of Energy Albuquerque Operations Office Grand Junction Office Project Number UGW-511-0020-01-000 Document Number U0013400 Work Performed under DOE Contract No. DE-AC13-96GJ87335 Note: Some of the section page numbers in the Table of Contents may not correspond to the page on which the section appears when viewing them in Adobe Acrobat. Document Number U0013400 Contents DOE/Grand Junction Office Work Plan for Characterization Activities at Shiprock Project Site June 1998 Draft Final Page v Contents Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi 1.0 Introduction .

98

Working with NIST  

NLE Websites -- All DOE Office Websites (Extended Search)

NIST NIST Terry Lynch Office of Technology Partnerships How to Work with NIST How to Work with NIST „ „ Standards Standards „ „ Collaborative Research & Technology Devolvement Collaborative Research & Technology Devolvement Programs Programs „ „ Invention Licensing Invention Licensing Collaborative Research & Technology Collaborative Research & Technology Development Programs Development Programs „ „ Informal collaboration involving intramural research programs Informal collaboration involving intramural research programs „ „ Guest Research Agreements Guest Research Agreements „ „ Facility Use Agreements Facility Use Agreements „ „ Material Transfer Agreements Material Transfer Agreements „ „ Cooperative Research and Development Agreements (CRADA

99

Demonstration testing and evaluation of in situ soil heating. Treatability study work plan, Revision 1  

SciTech Connect

A Treatability Study planned for the demonstration of the in situ electromagnetic (EM) heating process to remove organic solvents is described in this Work Plan. The treatability study will be conducted by heating subsurface vadose-zone soils in an organic plume adjacent to the Classified Burial Ground K-1070-D located at K-25 Site, Oak Ridge. The test is scheduled to start during the fourth quarter of FY94 and will be completed during the first quarter of FY95. The EM heating process for soil decontamination is based on volumetric heating technologies developed during the `70s for the recovery of fuels from shale and tar sands by IIT Research Institute (IITRI) under a co-operative program with the US Department of Energy (DOE). Additional modifications of the technology developed during the mid `80s are currently used for the production of heavy oil and waste treatment. Over the last nine years, a number of Government agencies (EPA, Army, AF, and DOE) and industries sponsored further development and testing of the in situ heating and soil decontamination process for the remediation of soils containing hazardous organic contaminants. In this process the soil is heated in situ using electrical energy. The contaminants are removed from the soil due to enhanced vaporization, steam distillation and stripping. IITRI will demonstrate the EM Process for in situ soil decontamination at K-25 Site under the proposed treatability study. Most of the contaminants of concern are volatile organics which can be removed by heating the soil to a temperature range of 85 to 95 C. The efficiency of the treatment will be determined by comparing the concentration of contaminants in soil samples. Samples will be obtained before and after the demonstration for a measurement of the concentration of contaminants of concern.

Sresty, G.C.

1994-07-07T23:59:59.000Z

100

Work Package Templates  

Science Conference Proceedings (OSTI)

Work Package Templates provides fossil plant maintenance personnel with assorted inspection, minor repair or overhaul templates for various pieces of plant equipment. This guide will assist plant maintenance personnel in improving the efficiency, reliability and reducing the maintenance costs for associated with maintenance on selected pieces of equipment.

2007-02-15T23:59:59.000Z

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

METHOD OF WORKING BERYLLIUM  

DOE Patents (OSTI)

>A process is presented for fabricating beryllium metal. The billet cf beryllium metal is sheathed with a jacket of either copper or stainless steel. It may then be worked by drawing or the like at a tcmperature of 300 to 400 C.

Macherey, R.E.

1959-02-01T23:59:59.000Z

102

Ropes for Live Working  

Science Conference Proceedings (OSTI)

Fiber ropes represent an essential tool in many applications associated with the electric power industry. Ropes used in proximity to or in contact with high-voltage power lines require demanding dielectric properties as well as strength and durability. A comprehensive understanding of live working (LW) rope construction, performance, and use is necessary for safe and efficient operations wherever such ropes are used.

2008-11-18T23:59:59.000Z

103

Public Works Transportation Infrastructure Study  

E-Print Network (OSTI)

Public Works Transportation Infrastructure Study Minneapolis City of Lakes Minneapolis Public Works Transportation Infrastructure Study #12;Public Works Transportation Infrastructure Study Minneapolis City Works Transportation Infrastructure Study Minneapolis City of Lakes Background: · Currently, funding

Minnesota, University of

104

HANFORD ENGINEER WORKS  

Office of Legacy Management (LM)

HANFORD ENGINEER WORKS HANFORD ENGINEER WORKS IJd *P-t - - ~~~ssiticatiC+n cwcetted rat G.E. NUCLEONICS PROJECT xi I ~@L.%&~--G-ENERAI,@ ELECTRIC z ,m ._.__.-. _ I--..-. By Authority of. COMPANY ._ Atmic Energy Commission Office of Hanford Dire&xl Operations Riohland, Washington Attention; Mr. Carleton Shugg, Manager ./ ALPKA-ROLLED EL'GIL%I jw -879 ' . *_ a. f' Richland, Washington February 6, 1948 , Thla Dclc.Jv-

105

Working With Berkeley Lab  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with the Lab Working with the Lab A-Z Index Search Phone Book Comments Ernest Orlando Lawrence Berkeley National Laboratory Technology Transfer Patent Department Sponsored Projects Office Procurement: Doing Business with the Lab Visitor Information Scientififc Divisions and National User Facilities UC Campus-Labs Collaboration Programs Berkeley Lab stresses collaboration in everything we do. The Laboratory is involved in many research partnerships with private industry. Our mission also includes the transfer of Laboratory inventions to the private sector for rapid commercialization. The role of the Technology Transfer Office is to make technology and expertise developed here available to industry. Contact the Technology Transfer Office to pinpoint research areas of common interest, negotiate rights to Laboratory intellectual property, and to discuss current patent and copyright licensing opportunities.

106

Working Group Reports  

NLE Websites -- All DOE Office Websites (Extended Search)

5 5 Working Group Reports Special Working Session on the Role of Buoy Observations in the Tropical Western Pacific Measurement Scheme J. Downing Marine Sciences Laboratory Sequim, Washington R. M. Reynolds Brookhaven National Laboratory Upton, New York Attending W. Clements (TWPPO) F. Barnes (TWPPO) T. Ackerman (TWP Site Scientist) M. Ivey (ARCS Manager) H. Church J. Curry J. del Corral B. DeRoos S. Kinne J. Mather J. Michalsky M. Miller P. Minnett B. Porch J. Sheaffer P. Webster M. Wesely K. Zorika G. Zhang Focus of Discussion The session convened on March 2, with brief introductions by Bill Clements. The purpose of the session was to discuss the scientific merits of retrofitting TOGA/TAO buoys with shortwave radiometers. Three questions were posed at the outset of the session to focus the discussion.

107

CHA Guidelines Working Group  

E-Print Network (OSTI)

The Community Health Assessment Guidelines have been updated from the original document published in 1997. The revisions reflect various published sources, as well as accumulated experience with community health assessment within the province of Manitoba. Special thanks to the members of the CHA Guidelines Working Group, composed of representatives of regional health authorities from across the province and Manitoba Health and Healthy Living staff. These guidelines are made

Jody Allan; Sonia Busca Owczar; Ingrid Botting; Maggie Campbell; Bunmi Fatoye; Bill Funk; Tannis Erickson; Sue Lockhart; Ales Morga; Deborah Malazdrewicz; Leonie Stranc

2009-01-01T23:59:59.000Z

108

TRU TeamWorks  

NLE Websites -- All DOE Office Websites (Extended Search)

, 2004 , 2004 By the Numbers WIPP marks five-year anniversary Shipments scheduled to arrive at WIPP for the week of 4/4/04 - 4/10/04: 18 Total shipments received at WIPP: 2,456 Total volume disposed at WIPP: 19,042 m 3 FY04 Performance Metrics D E P A R T M E N T O F E N E R G Y U N I T E D S T A T ES O F A M E R I C A TeamWorks TeamWorks TRU A weekly e-newsletter for the Waste Isolation Pilot Plant team For those who endured the early morning cold of March 26, 1999, to witness WIPP's first shipment, it may seem like yesterday. Yet Friday marked five years of WIPP operations. Relative newcomer to WIPP - but not to the waste management industry - CBFO Deputy Manager Lloyd Piper observed, "The transformation from a facility in "standby" mode to operational mode has been nothing short of amazing."

109

Working With FEERC  

NLE Websites -- All DOE Office Websites (Extended Search)

Mechanisms For Partnering Mechanisms For Partnering with the Fuels, Engines, and Emissions Research Center at the Oak Ridge National Laboratory Oak Ridge National Laboratory (ORNL) has a program designed to provide technology-based solutions to organizations ranging from startups to Fortune 100 companies to academic institutions. Underlying this philosophy is our belief that strong partnerships with U.S. industry are the best way to share technological know-how with the private sector. Regardless of the activity-entering into a Cooperative Research and Development Agreement (CRADA) or Work for Others (WFO) agreement, or interacting with an industry or university through other means-we are committed to outcomes that create beneficial opportunities for the external organization as well as

110

End of Month Working  

Gasoline and Diesel Fuel Update (EIA)

The level of gas in storage at the end of the last heating season (March The level of gas in storage at the end of the last heating season (March 31, 2000) was 1,150 billion cubic feet (Bcf), just above the 1995-1999 average of 1,139 Bcf. Underground working gas storage levels are currently about 8-9 percent below year-ago levels. In large part, this is because injection rates since April 1 have been below average. Storage injections picked up recently due to warm weather in the last half of October. The month of November is generally the last month available in the year for injections into storage. A cold November would curtail net injections into storage. If net injections continue at average levels this winter, we project that storage levels will be low all winter, reaching a level of 818 Bcf at the end of March, the lowest level since 1996

111

Work Force Restructuring Activities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Force Restructuring Activities Force Restructuring Activities December 10, 2008 Note: Current updates are in bold # Planned Site/Contractor HQ Approved Separations Status General * LM has finalized the compilation of contractor management team separation data for the end of FY07 actuals and end of FY08 and FY09 projections. LM has submitted to Congress the FY 2007 Annual Report on contractor work force restructuring activities. The report has been posted to the LM website. *LM conducted a DOE complex-wide data call to the Field and Operations offices for DOE Contractor Management teams to provide, by program, actual contractor separation data for the end of FY 2008 and projections for the end of FY 2009 and FY 2010. The data will be used to keep senior management informed of upcoming large WFR actions.

112

Statement of Work  

NLE Websites -- All DOE Office Websites (Extended Search)

DE-SOL-0003174 1 FOR OFFICIAL USE ONLY - SOURCE SELECTION SENSITIVE, SEE FAR 3.104-3 PERFORMANCE WORK STATEMENT (PWS) Emergency Operations Training Academy (EOTA) Support Services May 27, 2011 Draft 1.0 Introduction The U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA), Office of Emergency Operations (NA-40) requires support services in the development and delivery of training, exercises, and other related technical and administrative support services at the Emergency Operations Training Academy (EOTA) in Albuquerque, New Mexico. 2.0 Background NA-40's mission is to ensure that capabilities are in place to respond to any NNSA and DOE facility emergency. NA-40 is the nation's premier responder to any nuclear or radiological

113

COMMENTARY Making sustainability work  

E-Print Network (OSTI)

Todays economic theory usually neglects the role of nature and environment. To make sustainability work it is, however, essential to (re-)integrate nature into the standard concepts of economics, especially by incorporating natural factors into the production function. It must be acknowledged that economic growth is not (only) the result of technical change but is mainly caused by rising energy-inputs into the economy, and that this is necessarily followed by resource exhaustion and pollution. Therefore, nature must not only be taken into account as a central factor of production but also in the form of environmental quality which is the basis for human quality of life. A numeric example shows that a small, but steady decrease of yearly resource consumption is already apt to redirect the economy on a path of sustainable development. 1998 Elsevier Science B.V. All rights reserved. Keywords: Sustainable development; Economic theory of production; Economic growth; Technical change; Non-renewable resources

Hans Christoph Binswanger

1996-01-01T23:59:59.000Z

114

TRU TeamWorks  

NLE Websites -- All DOE Office Websites (Extended Search)

8, 2012 8, 2012 WIPP Quick Facts (As of 9-26-12) 10,849 Shipments received since opening (10,252 CH and 597 RH) 83,693 Cubic meters of waste disposed (82,394 CH and 299 RH) 162,472 Containers disposed in the underground (161,882 CH and 590 RH) Photo above right: CBFO Deputy Manager Ed Ziemianski presents a WIPP team with the Green Zia Program Silver Level Award from the New Mexico Environment Department on Aug. 15, 2012 in recognition of environmental initiatives. Shown right of Ziemianski is Farok Sharif, WTS President and General Manager. New WIPP Management and Operating Contractor to start October 1 Nuclear Waste Partnership LLC (NWP) will start work as the WIPP Management and Operating Contractor on Monday, October 1. WIPP receives Green Zia Award The Waste Isolation Pilot Plant (WIPP), the U.S. Department of Energy (DOE)

115

NSLS Committees | Interlock Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Interlock Working Group Charge The NSLS Interlock Working Group shall review all new construction and modification of NSLS and SDL personnel protection interlock systems. It is the...

116

Will NIF Work  

E-Print Network (OSTI)

It is vital that new clean and abundant sources of energy be developed for the sustainability of modern society. Nuclear fusion of the hydrogen isotopes deuterium and tritium, if successful, might make a major contribution toward satisfying this need. The U.S. has an important effort aimed at achieving practical inertial confinement fusion, ICF, which has been under development for decades at the Lawrence Livermore National Laboratory. The National Ignition Facility (NIF) is a giant laser to multiply-shock and thus quasi-isentropically compress a capsule of deuterium-tritium (DT) to high density and temperature, where the fusion rate is proportional to density squared times temperature to the fourth power. The principal problem that must be solved for NIF to work successfully is elimination of the Rayleigh-Tailor (R-T) instability that originates from the interface between the solid shell and the DT fuel within it. The R-T instability poisons the fusion reaction by reducing the temperature of the DT achieved ...

Nellis, W J

2009-01-01T23:59:59.000Z

117

ARM - Engineering Work Request & Engineering Work Order Guidelines  

NLE Websites -- All DOE Office Websites (Extended Search)

Work Request & Engineering Work Request & Engineering Work Order Guidelines Page Contents: Introduction Discussion of the ARM Climate Research Facility Engineering Process: The Engineering Change Request (ECR) and the Engineering Change Order (ECO) Operations and Engineering Task Consulting: The Engineering Work Request (EWR) and the Engineering Work Order (EWO) Relationship of the ECR/ECO and EWR/EWO to the Engineering Task Tracking Tool Relationship of the ECR/ECO and EWR/EWO to the Existing Configuration Control Process in the ARM Climate Research Facility(PIF/CAR, PRR, ORR, and BCR) Glossary Frequently Asked Questions (PDF, 173K) Engineering Work Request & Engineering Work Order Guidelines Process Guidelines for the Engineering Change Request/Engineering Change Order and Engineering Work Request/Engineering Work Order

118

Name Title Work Phone Work E-Mail  

NLE Websites -- All DOE Office Websites (Extended Search)

12012 EOTA - STAFF Name Title Work Phone Work E-Mail Melissa Otero Program Manager 505-842-7112 motero@eota.energy.gov Janet Lee Online Learning Support Specialist 505-842-7110...

119

Work-Life Programs and Services  

Science Conference Proceedings (OSTI)

... NIST? Work Life Programs; Work Schedules. *. Bookmark and Share. Work-Life Programs and Services. Alternative ...

2011-09-22T23:59:59.000Z

120

Maintenance Work Management Improvement: Improving Culture and Work Process  

Science Conference Proceedings (OSTI)

EPRI's Plant Maintenance Optimization (PMO) mission is to develop and demonstrate products and services for improved use of power plant maintenance resources and increased profitability. Based on a series of work management improvement projects, EPRI plans to develop a best practices guideline. As part of this effort, this document details how to improve fossil power plant work culture and work processes.

1998-06-16T23:59:59.000Z

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Radiation Safety Work Control Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Radiation Safety Work Control Form Radiation Safety Work Control Form (see instructions on pg-2) Rev July-2012 Area: Form #: Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers mitigate the radiological hazards introduced by the proposed work? Yes No (b) Can the closed state of the beam line injection stoppers be assured during the proposed work (ie., work does NOT involve injection stoppers or associated HPS)? Yes No If the answers to both questions are yes, the work can be performed safely under an SSRL RSWCF. If the answer to either question is no, then the work must be performed under a SPEAR3 RSWCF. Section 1: Description of work to be done, including date and time. (Person Responsible completes section)

122

The Work for Others Agreement  

NLE Websites -- All DOE Office Websites (Extended Search)

were granted the authority to perform work for others by the Atomic Energy Act of 1954 Public Law 83-703; 42 USC 2053. Work For Others programs at the DOE national...

123

How does the brain work?  

NLE Websites -- All DOE Office Websites (Extended Search)

Conceptually though it's a widget to get folks from where they live to where they work, and it works by figuring out the paths they take, assigning trains to those routes,...

124

Live Work Guide for Substations  

Science Conference Proceedings (OSTI)

Live work (work on energized circuits) is the preferred method of maintenance where system integrity, system reliability, and operating revenues are at a premium and removal of a circuit or a substation from service is not acceptable. Live work (LW) may also be beneficial in construction and storm damage repair. Furthermore, live work may be unavoidable in the case of substations that serve essential facilities such as hospitals, law enforcement, fire departments, and intrusion alarms if standby local ge...

2004-10-28T23:59:59.000Z

125

Manhattan Project: Final Bomb Design, Los Alamos: Laboratory, 1944-1945  

Office of Scientific and Technical Information (OSTI)

The first 0.11 seconds of the nuclear age, Trinity, July 16, 1945. FINAL BOMB DESIGN The first 0.11 seconds of the nuclear age, Trinity, July 16, 1945. FINAL BOMB DESIGN (Los Alamos: Laboratory, 1944-1945) Events > Bringing It All Together, 1942-1945 Establishing Los Alamos, 1942-1943 Early Bomb Design, 1943-1944 Basic Research at Los Alamos, 1943-1944 Implosion Becomes a Necessity, 1944 Oak Ridge and Hanford Come Through, 1944-1945 Final Bomb Design, 1944-1945 Atomic Rivals and the ALSOS Mission, 1938-1945 Espionage and the Manhattan Project, 1940-1945 American troops approaching the beach, D-Day, June 6, 1944. Late in 1944, Los Alamos began to shift from research to development and bomb production. Increased production at Oak Ridge and Hanford seemed to promise that enough plutonium and enriched uranium would be available for at least one bomb using each. Germany no longer was the intended primary target. The war in Europe (left) appeared to be entering its final phase, and evidence uncovered by the ALSOS mission in November 1944 indicated that the German atomic program had not gone beyond the research phase. Already by summer 1944, Groves and his advisers had turned their sights toward Japan. The atomic bomb would justify the years of effort, including both the vast expenditures and the judgment of everyone responsible, by bringing the war in the Pacific to a fiery end. J. Robert Oppenheimer Ongoing problems continued to complicate the efforts of Robert Oppenheimer (right) to finalize bomb design. Foremost among these were continuing personnel shortages, particularly of physicists, and supply difficulties. The procurement system, designed to protect the secrecy of the Los Alamos project, led to frustrating delays and, when Herb Lehr, SED, holding the Gadget's core, July 1945. combined with persistent late war shortages, proved a constant headache. The lack of contact between the remote laboratory and its supply sources exacerbated the problem, as did the relative lack of experience the academic scientists had with logistical matters. Leslie Groves and James Conant were determined not to let mundane problems compromise the bomb effort, and in fall 1944 they made several changes to prevent this possibility. Conant shipped as many scientists as could be spared from the Met Lab and Oak Ridge to Los Alamos, hired every civilian machinist he could lay his hands on, and arranged for Army enlisted men to supplement the work force (these GIs were known as SEDS ("Special Engineering Detachment"). Hartley Rowe, an experienced industrial engineer, provided help in easing the transition from research to production. Los Alamos also arranged for a rocket research team at the California Institute of Technology to aid in procurement, test fuses, and contribute to component development. These changes kept Los Alamos on track as design work reached its final stages.

126

July 2012, Work Force Retention Work Group Status Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Work Force Retention Work Group Status Overview Work Force Retention Work Group Status Overview Accomplishments: 1. Progress on the completion of the 10 CFR 1046 modifications to address barriers to workforce retention. Written response to public comment is being drafted by HS-51. 2. Pro-Force (PF) union representative, Randy Lawson, identified this accomplishment as the single most significant step toward PF workforce retention in over 20 years. 3. Draft re-charter of PF Career Options Committee (PFCOC) to establish a PF Working Group approved by GC-63 and GC NNSA. Near Term Goals and Activities: 1. Publish 1046 as a final rule - anticipated completion no later than September, assuming timely OMB review and approval. 2. Draft PF Working Group charter final review by senior management to be

127

FACT SHEET: BIOENERGY WORKING GROUP  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 2010 , 2010 1 FACT SHEET: BIOENERGY WORKING GROUP At the Clean Energy Ministerial in Washington, D.C. on July 19 th and 20 th , ministers launched a Bioenergy Working Group, which will advance the deployment of bioenergy technologies by implementing recommendations of the Technology Action Plan on Bioenergy Technologies that was released by the Major Economies Forum Global Partnership in December 2009. The Working Group will work in close cooperation with the Global Bioenergy Partnership (GBEP), which is co-chaired by Brazil and Italy. Initial key activities of the Working Group include: 1. Global Bioenergy Atlas: The Working Group will combine and build upon existing databases of sustainably-developed bioenergy potential around the globe and make it available in an open web-

128

Robotic Technologies for Live Working  

Science Conference Proceedings (OSTI)

The objective of this report is to review selected available robotic technologies and evaluate their possible applicability to live working. The selection criteria for robotic technologies included suitability for operation in a high-voltage environment; mechanical load capacity; and extent of reach, size, and weight compatible with live work applications. The report provides a brief history of robotics in live work dating back to late 1970s and the development of the EPRI TOMCAT (Teleoperator for Operat...

2010-12-23T23:59:59.000Z

129

September 2012, Work Force Retention Work Group Status Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Work Force Retention Work Group Status Overview Work Force Retention Work Group Status Overview 2 Subgroups: Pro-Force and Non-Pro-Force Pro-Force Subgroup: Accomplishments: 1. Completion of 10 CFR 1046 [Protective Force Personnel Medical, Physical Readiness, Training, and Access Authorization Standards] as a final rule that includes modification efforts to address barriers to workforce retention. 2. Pro-Force (PF) union representative, Randy Lawson, identified this accomplishment as the single most significant step toward PF workforce retention in over 20 years. 3. Draft re-charter of PF Career Options Committee (PFCOC) to establish a PF Working Group approved by GC-63 and GC NNSA. Near Term Goals and Activities: 1. Publish 1046 as a final rule - publication anticipated this month.

130

Radiation Safety Work Control Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Radiation Safety Work Control Form (see instructions on pg-2) Rev July-2012 Area: Form : Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers...

131

Construction Work in Progress (Kansas)  

Energy.gov (U.S. Department of Energy (DOE))

This Act allows nuclear power plants to qualify for recovery of Construction Work in Progress (CWIP) and other preconstruction expenditures in rates. Previously, nuclear power plants were excluded...

132

Work Family Community, Human Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

Work-Life Balance Programs Adoption Assistance Program Benefits Blood Drives Brookhaven Employee's Recreation Association (BERA) Brookhaven Retired Employee Association (BREA)...

133

Transuranic Waste Transportation Working Group Agenda | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transportation Working Group Agenda Transuranic Waste Transportation Working Group Agenda Transuranic Waste Transportation Working Group Agenda More Documents & Publications...

134

WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL  

Office of Legacy Management (LM)

WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL RESTORATION OF THE DOE MOUND RESTORATION OF THE DOE MOUND RESTORATION OF THE DOE MOUND RESTORATION OF THE DOE MOUND SITE, THE MOUND 2000 APPROACH SITE, THE MOUND 2000 APPROACH SITE, THE MOUND 2000 APPROACH SITE, THE MOUND 2000 APPROACH FEBRUARY 1999 Final (Revision 0) Department of Energy Babcock & Wilcox of Ohio Mr. Daniel Bird AICP, Planning Manager Miamisburg Mound Community Improvement Corporation 720 Mound Road Miamisburg, Ohio 45342-6714 Dear Mr. Bird: The Core Team, consisting of the U.S. Department of Energy Miamisburg Environmental Management Project (DOE-MEMP), U.S. Environmental Protection Agency (USEPA), and the Ohio Environmental Protection Agency (OEPA), appreciates your comments on the Work

135

The future of crowd work  

Science Conference Proceedings (OSTI)

Paid crowd work offers remarkable opportunities for improving productivity, social mobility, and the global economy by engaging a geographically distributed workforce to complete complex tasks on demand and at scale. But it is also possible that crowd ... Keywords: crowd work, crowdsourcing, organization design, research vision

Aniket Kittur; Jeffrey V. Nickerson; Michael Bernstein; Elizabeth Gerber; Aaron Shaw; John Zimmerman; Matt Lease; John Horton

2013-02-01T23:59:59.000Z

136

FY 1994 Annual Work Plan  

SciTech Connect

This is the third Office of Inspector General (OIG)Annual Work Plan. Its purpose is to summarize work completed in Fiscal Year (FY) 1993, identify ongoing projects from previous fiscal years which the OIG intends to continue into FY 1994, and announce planned projects which the OIG intends to begin in FY 19994.

Not Available

1993-10-01T23:59:59.000Z

137

http://bellview/TeamWorks/TRUTeamWorks.htm  

NLE Websites -- All DOE Office Websites (Extended Search)

stemmed from a commitment made by WTS management to CBFO in May to "promote safety consciousness while we perform our work" and "improve our ability to manage people in a...

138

file://\\Bellview\TeamWorks\TRUTeamWorks.htm  

NLE Websites -- All DOE Office Websites (Extended Search)

8/03 TRU TeamWorks will resume printing on January 8, 2004 | Shipments expected this we 8/03 TRU TeamWorks will resume printing on January 8, 2004 | Shipments expected this we December 18, 2003 The Big Story: It's a wrap - 2003 Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e- mail. WIPP Shipments (as of 12/18/03 at 8:14 a.m.) Shipments scheduled to arrive at WIPP this week 23 Total shipments received at WIPP 2,226 In 2003, the WIPP team delivered in every mission-essential area. TRU TeamWorks wraps up the calendar year with 2003's performance highlights. Steve Warren, Washington TRU Solutions (WTS) general manager, says, "I view

139

RHIC II Science Working Groups  

NLE Websites -- All DOE Office Websites (Extended Search)

Workshops Workshops The series of RHIC II Science Workshops began in November 2004, at which time seven Working Groups were initiated. These groups met in workshops through 2005, with the purpose of providing an organized forum for the community to address and describe quantitatively the most important science issues for the proposed RHIC II luminosity upgrade, and corresponding detector upgrades. Each Working Group was led by three convenors representing theory and experiment, and each has produced a detailed report (except for the "New Directions" group, which provided a sounding board and input to the other groups). The Working Group reports are linked below. The summary "white paper" document, "Future Science at the Relativistic Heavy Ion Collider" (PDF), is based on these reports, and was prepared by a Writing Committee that included at least one convenor from each of the Working Groups.

140

Working with Modules within Python  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with Modules within Perl and Python Working with Modules within Perl and Python Working with Modules within Perl and Python It can often be convenient to work with the modules system from within perl or python scripts. You can do this! Using Modules within Python The EnvironmentModules python package gives access to the module system from within python. The EnvironmentModules python package has a single function: module. Using this function you can provide the same arguments you would to "module" on the command line. The module() function accepts a list of arguments, like ['load','']; or ['unload','']. >>> import EnvironmentModules as EnvMod >>> EnvMod.module(['load','blast+']) It is important to understand that this is most effective for scripts

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

DOE Work Breakdown Structure Handbook  

Energy.gov (U.S. Department of Energy (DOE))

This handbook provides suggested guidance and best practices on the development of product-oriented Work Breakdown Structures (WBS) that should be used by all projects within DOE to organize and...

142

Clean Energy Works Oregon (Oregon)  

Energy.gov (U.S. Department of Energy (DOE))

Clean Energy Works began in 2009 as a pilot program run by the City of Portland. In 2010, the US department of Energy awarded $20 million to create a statewide nonprofit to expand the program...

143

FY 1994 Annual Work Plan  

SciTech Connect

In accordance with the Inspector General`s Strategic Planning Policy directive, the Office of Inspector General (OIG) annually updates its Strategic Plan with budgetary and program guidance for the next fiscal year. The program guidance identifies and establishes priorities for OIG coverage of important DOE issues and operations, provides the basis for assigning OIG resources, and is the source for issues covered in Assistant Inspectors General annual work plans. The Office of the Assistant Inspector General for Audits (AIGA) publishes an Annual Work Plan in September of each year. The plan includes the OIG program guidance and shows the commitment of resources necessary to accomplish the assigned work and meet our goals. The program guidance provides the framework within which the AIGA work will be planned and accomplished. Audits included in this plan are designed to help insure that the requirements of our stakeholders have been considered and blended into a well balanced audit program.

1993-09-30T23:59:59.000Z

144

First Aid at Work Introduction  

E-Print Network (OSTI)

provided. 2. People, wherever they work in our industry, can suffer injury or be taken ill. It is essential such equipment and facilities as are adequate and appropriate in the circumstances for enabling first

145

Work Plan - U.S.-India Coal Working Group | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Work Plan - U.S.-India Coal Working Group Work Plan - U.S.-India Coal Working Group Work Plan - U.S.-India Coal Working Group More Documents & Publications HSS Work Group Telecom...

146

Extracting work from quantum systems  

E-Print Network (OSTI)

We consider the task of extracting work from quantum systems in the resource theory perspective of thermodynamics, where free states are arbitrary thermal states, and allowed operations are energy conserving unitary transformations. Taking as our work storage system a 'weight' we prove the second law and then present simple protocols which extract average work equal to the free energy change of the system - the same amount as in classical thermodynamics. Crucially, for systems in 'classical' states (mixtures of energy eigenstates) our protocol works on a single copy of the system. This is in sharp contrast to previous results, which showed that in case of almost-deterministic work extraction, collective actions on multiple copies are necessary to extract the free energy. This establishes the fact that free energy is a meaningful notion even for individual systems in classical states. However, for non-classical states, where coherences between energy levels exist, we prove that collective actions are necessary, so long as no external sources of coherence are used.

Paul Skrzypczyk; Anthony J. Short; Sandu Popescu

2013-02-12T23:59:59.000Z

147

Perma Works | Open Energy Information  

Open Energy Info (EERE)

Perma Works Perma Works Jump to: navigation, search Name Perma Works Place Albuquerque, New Mexico Zip 87123 Sector Geothermal energy Product A company that focuses on producing enhanced geothermal systems through providing electronics and software. Coordinates 35.08418°, -106.648639° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.08418,"lon":-106.648639,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

148

Working Remotely | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Working Remotely Working Remotely Remote Access Use VPN to access Argonne resources Wake up your computer if power management policies have been applied Connect to your work computer by using Remote Desktop Communications Log into web-based e-mail Outlook Zimbra Send instant messages with Jabber Use Argonne's voice mail and teleconferencing services Use Adobe Connect for web conferencing E-Mail Client and Mobile Device Configuration Changes for Exchange 2010 Cyber Security Secure your home computers Passwords MyPassword Change your password Choosing a good password Other Tools Upload a file for retrieval by others (login required) Argonne SharePoint Server (login required) Inside Argonne (accessible onsite or through VPN) Focal Point Management Blog (accessible onsite or through VPN)

149

Energy Work | Open Energy Information  

Open Energy Info (EERE)

Work Work Jump to: navigation, search Name Energy Work Place Kelaniya, Sri Lanka Sector Biomass, Renewable Energy, Solar Product Dealing with renewable energy applications, specifically solar and biomass power generation Coordinates 6.95°, 79.916702° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":6.95,"lon":79.916702,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

150

CFN Ops Plan | Work Planning  

NLE Websites -- All DOE Office Websites (Extended Search)

Operations Plan Operations Plan Work Planning & Control for Experiments and Operations All experimental work will be conducted in accordance with Work Planning and Control for Experiments and Operations, which ensures proper design and operation of all experiments prior to their commencement. CFN will use the SBMS provided standard form for the formal documentation. The Lead Experimenter/Responsible person will notify the Experimental Safety Review Committee of any new experiments or modifications to existing experiments. CFN will appoint an Experimental Safety Review Committee. This committee will consist of the Experiment Review Coordinator, CFN personnel, Facility Support Representative (FSR), Environmental Compliance Representative (ECR). Additional subject matter experts may be appointed on an ad-hoc

151

Surveillance Guides - Work Control Process  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Work Control Process Work Control Process 1.0 Objective The objective of this surveillance guide is to provide lines of inquiry for evaluating the effectiveness of the contractor's work control process. Users should be cognizant that the lines of inquiry need to be further tailored to fit specific facilities or activities in accordance with contractual mechanisms such as Maintenance Implementation Plans, Conduct of Operations Implementation Plans, and the Integrated Safety Management System Description. 2.0 References 2.1 DOE 4330.4B Maintenance Management Program 2.2 48 CFR 1970.5204-2 Department of Energy Acquisition Regulations 2.3 DOE O 5480.19, Conduct of Operations 2.4 10 CFR 830.120, Quality Assurance 3.0 Requirements Implemented This surveillance is conducted to verify implementation of Core

152

CFCC working group meeting: Proceedings  

SciTech Connect

This report is a compilation of the vugraphs presented at this meeting. Presentations covered are: CFCC Working Group; Overview of study on applications for advanced ceramics in industries for the future; Design codes and data bases: The CFCC program and its involvement in ASTM, ISO, ASME, and military handbook 17 activities; CFCC Working Group meeting (McDermott Technology); CFCC Working Group meeting (Textron); CFCC program for DMO materials; Developments in PIP-derived CFCCs; Toughened Silcomp (SiC-Si) composites for gas turbine engine applications; CFCC program for CVI materials; Self-lubricating CFCCs for diesel engine applications; Overview of the CFCC program`s supporting technologies task; Life prediction methodologies for CFCC components; Environmental testing of CFCCs in combustion gas environments; High-temperature particle filtration ORNL/DCC CRADA; HSCT CMC combustor; and Case study -- CFCC shroud for industrial gas turbines.

NONE

1997-12-31T23:59:59.000Z

153

Work Practices for Chemical Fumehoods  

NLE Websites -- All DOE Office Websites (Extended Search)

Practices for Chemical Fumehoods Practices for Chemical Fumehoods (Reviewed May 16, 2011) Always use a chemical fumehood when working with toxic and/or volatile chemicals, not on an open bench. Chemical fumehoods are designed to provide protection for the user from chemical and radiological contaminants. However, they do not absolutely eliminate exposure, even under ideal conditions. Careless work practices can result in considerable exposure to users who may believe they are protected. To optimize the performance of the chemical hood, adhere to the following work practices: 1. Ensure that your chemical hood has a current inspection sticker (dated within the last year). The face velocity should be between 80 and 120 linear feet per minute (lfpm). 2. Verify that the chemical hood is drawing air.

154

Categorical Exclusion for Maintenance Work  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Maintenance Work Maintenance Work along the Electrical District 5 to Saguaro segment (41/4 to 58/5) of the Maricopa-Saguaro 115-kV Transmission Line, between Friendly Comers and Marana, Pinal County, Arizona RECORD OF CATEGORICAL EXCLUSION DETERMINATION A. Proposed Action: Western plans to conduct maintenance work to maintain or improve the reliability and safety of electrical transmission along 17 miles of the Test Track (formerly Maricopa)-Saguaro 115-kV Transmission Line between Electrical District 5 and Saguaro Steam Plant Substations. The work includes replacing wood poles, cross arms, and knee braces in-kind at 27 structures (41/4-8, 4214, 43/6, 4417, 45/4,46/6,47/2,49/2,49/6,50/2,50/6,50/8,51/4, 52/3, 54/3, 5517, 56/1 57/1-3, 57/8 & 58/2-3), because the wood poles failed stability tests, cross arms are beyond

155

Available work in geothermal energy  

DOE Green Energy (OSTI)

The most important thermodynamic considerations needed for a clear understanding of the operation of geothermal installations used for the production of electricity are presented. A brief description is given of the nature of a geothermal reservoir and the characteristics of the most practical systems for the conversion of geothermal energy into work are described. The appropriate specialized forms of the First and Second Laws of Thermodynamics are derived and the related concepts of optimum available work, available work, entropy production, dissipated energy, and utilization factor are introduced. The shortcomings of the method of cycle analysis are discussed when applied to geothermal plants. Special attention is devoted to a detailed discussion of the most important general indicators that follow for the designer from a thermodynamic analysis. Various methods of graphically interpreting the concept of available work are described in detail and the importance of easily accessible, reliable formulations of the thermophysical properties of the pure substances, solutions, and mixtures that the designer needs for success are discussed. (MHR)

Kestin, J.

1978-07-01T23:59:59.000Z

156

FINAL Announcement International Brainstorming Work-  

E-Print Network (OSTI)

, though in an energy in-efficient way. Organic MSW is identified as one of the potential sources of biomass energy. Biomass is a renewable resource that has a steady and abundant supply, especially thoseFINAL Announcement 1st International Brainstorming Work- shop on Waste to Energy in India Organized

Hone, James

157

Field Guide: Live Working Rope  

Science Conference Proceedings (OSTI)

Ropes are an essential tool in many applications associated with the electric power industry. Ropes used in proximity to or in contact with high-voltage power lines require demanding dielectric properties as well as strength and durability. A comprehensive understanding of live working rope use is necessary for safe and efficient operations wherever such ropes are used.

2009-03-31T23:59:59.000Z

158

http://bellview/TeamWorks/TRUTeamWorks.htm  

NLE Websites -- All DOE Office Websites (Extended Search)

A weekly e-newsletter for the Waste Isolation Pilot Plant team September 18, 2003 The Big Story Characterization Operations completed at ANL-E Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e-mail. WIPP Shipments (as of 9-18-03 at 7:17 a.m.) 21 Shipments scheduled to arrive at WIPP this week 2,020 Total shipments received at WIPP Months of dedication and teamwork have paid off for WIPP Central Characterization Project (CCP) employees working at Argonne National Laboratory - East (ANL-E). Characterization activities at the site have

159

http://bellview/TeamWorks/TRUTeamWorks.htm  

NLE Websites -- All DOE Office Websites (Extended Search)

| NRC Officials Visit WIPP Tod | NRC Officials Visit WIPP Tod A weekly e-newsletter for the Waste Isolation Pilot Plant team September 25, 2003 The Big Story Recertification - a work in progress Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e-mail. WIPP Shipments (as of 9-25-03 at 7:16 a.m.) 21 Shipments scheduled to arrive at WIPP this week 2,044 Total shipments received at WIPP Without EPA approval, WIPP could not have received the first waste shipment in 1999. In 1998, EPA cleared the way for TRU waste disposal when it certified that the WIPP repository would safely contain

160

Training Work Group Charter | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Work Group Charter Training Work Group Charter The Training Work Group fosters improvements in the quality, efficacy, and delivery of DOE safety training, and realizes...

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

NREL: Transmission Grid Integration - Working With Us  

NLE Websites -- All DOE Office Websites (Extended Search)

Working With Us NREL works with industry, government, and academia on transmission integration research. Learn how you can work with us. Develop Technology Partnerships There are a...

162

Undergraduate Program Time Limits and Work Schedules  

NLE Websites -- All DOE Office Websites (Extended Search)

Time Limits and Work Schedules Undergraduate Program Time Limits and Work Schedules Point your career towards LANL: work with the best minds on the planet in an inclusive...

163

Derivative Works | Scientific and Technical Information Program  

Office of Scientific and Technical Information (OSTI)

works are those based on one or more already existing works, This includes any work in which the editorial revisions, annotations, elaborations, or other modifications,...

164

Substances of Abuse and Work  

NLE Websites -- All DOE Office Websites (Extended Search)

SUBSTANCES OF ABUSE SUBSTANCES OF ABUSE AND WORK Mary L. Doyle, MPH, RN, COHN-5/CM DOE Headquarters January 16, 2002 Americans 12 Years and Older Using Dru s or Alcohol in the Past Month 1915 1995 1999 Substance Abuse in Industry * Drug use - associated with higher rates of )>absenteeism )>injury l> medical care utilization )> involuntary separation l> health care costs * Alcohol use in the workplace associated with l> absenteeism l> performance on specific tasks ::... mixed data on other outcomes Americans Over 12 Years Reporting Lifetime (Ever Used) Drug Use "'.11---------11--------l * Aloobol *Airf.Udruc 50.11---------11--------l * Mari- ODd ........ 40.11---------11----&.---l * Cocaiae *llalaciaogoal * Horoia Substance Abuse and Work

165

Working at ORNL | Careers | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

View Open Positions View Open Positions View Postdoctoral Positions Create A Profile Internal applicants please apply here View or update your current application or profile. External applicants Internal applicants Internet Explorer Browser preferred for ORNL applicants. Chrome is not currently supported. For more information about browser compatibility please refer to the FAQs. If you have difficulty using the online application system or need an accommodation to apply due to a disability, please email ORNLRecruiting@ornl.gov or phone 1-866-963-9545 Careers Home | ORNL | Careers | Working at ORNL SHARE Working at ORNL Community and Culture Here at Oak Ridge National Lab we have over 4,000 employees representing more than 80 different countries. Our employees make a difference in the

166

Will our nuclear weapons work?  

NLE Websites -- All DOE Office Websites (Extended Search)

Will our nuclear weapons work? Will our nuclear weapons work? National Security Science magazine Latest Issue:April 2013 All Issues » submit Supercomputers are essential for assessing the health of the U.S. nuclear stockpile Supercomputers provide assurance by simulating nuclear weapons performance March 25, 2013 Graphic of a missile being tested through computer simulation Los Alamos uses supercomputers to make high-resolution 3D simulations that help to assess the health of nuclear weapons like this B-61 bomb. Contact Managing Editor Clay Dillingham Email The nuclear weapons in the U.S. stockpile were designed and built to be replaced with new designs and builds every 10 to 15 years. These weapons have lived beyond their expected lifespans. Supercomputers provide the high-resolution 3D simulations needed for

167

Visualization and Modeling Working Group  

Science Conference Proceedings (OSTI)

During the 2005 Hurricane season, many consequence predictions were available from 36 to 96 hours before landfalls, via the Department of Energys Visualization and Modeling Working Group (VMWG). Real-time data can be tapped by local officials and utilities, and can also be accessed for post-event regulatory audits. An overview of VMWGs models, results and uses will be presented.

Fernandez, S.J. (LANL); Dodrill, K.A.

2007-03-01T23:59:59.000Z

168

Robotic Technologies for Live Working  

Science Conference Proceedings (OSTI)

This project investigated the feasibility of developing a robotic device for removing and inserting the cotter key on a suspension or deadend insulator string8212the Cotter Key Remover-Installer and Camera (CKRIC). Researchers reviewed EPRI report 1019962, Robotic Technologies for Life Working (2010), and requested input and photographs of insulator strings from project funders. They then prepared animation sequences to study needed motions and degrees of freedom of the device, erected insulator strings ...

2011-12-16T23:59:59.000Z

169

Transportation External Coordination Working Group:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Accomplishments and Future Accomplishments and Future Transportation External Coordination Working Group Meeting Phoenix, AZ Judith A. Holm, Office of National Transportation Office of Civilian Radioactive Waste Management April 4, 2005 TEC MEMBER ORGANIZATIONS American College of Emergency Physicians (ACEP) American Nuclear Society (ANS) Association of American Railroads (AAR) Brotherhood of Locomotive Engineers and Trainmen (BLET) Commercial Vehicle Safety Alliance (CVSA) Conference of Radiation Control Program Directors, Inc. (CRCPD) Council of Energy Resource Tribes (CERT) Council of State Governments-Eastern Regional Conference (CSG-ERC) Council of State Governments-Midwestern Office (CSG-MW) Council on Radionuclides and Radiopharmaceuticals (CORAR) Dangerous Goods Advisory Council (DGAC)

170

Transportation External Coordination Working Group:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Study of Study of DOE FY03 SNF Shipments Judith Holm National Transportation Program Albuquerque, New Mexico April 21, 2004 Background Benchmarking * The goal of benchmarking is to identify, understand, and adapt outstanding practices from organizations anywhere in the world to help your organization improve its performance * Benchmarking looks outward to find best practice and high performance and then measures actual business operations against those goals Background Best Practices * Best practices are proven solutions that represent superior performance when adapted and implemented in one's own organization. This includes processes and procedures that others are using to transport radioactive materials Background Lessons Learned * Lessons learned are "good work practices" or

171

Transportation External Coordination Working Group:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

External Coordination External Coordination Working Group: Background and Process Judith Holm National Transportation Program Albuquerque, New Mexico April 21, 2004 TEC History * DOE's Office of Environmental Management (EM) and Office of Civilian Radioactive Waste Management (OCRWM) formed TEC in 1992 * EM & RW developed MOU and TEC charter in 1992 - Other DOE program offices joined in 1993-94 * Other agencies (DOT, FRA, NRC, EPA) have been active participants Meeting Locations 1992-present Some Founding Principles * TEC concept centered on unique stakeholder accountability principles - Participation by key responsible parties in technical/policy issue discussion and resolution results in increased confidence and more efficient business decisions * Ultimate goal: develop multi-year set of

172

QuarkNet at Work  

NLE Websites -- All DOE Office Websites (Extended Search)

QuarkNet at Work Information for Active Mentors & Teachers     QuarkNet Home - Information - Calendar - Contacts - Projects - Forms: EoI - Teachers Information Active Centers Calendar Contacts Expectations: for Teachers, for Mentors Information on Other Funding Sources Program Overview Support: for Teachers, for Centers Staff Job Description Activities Essential Practices - Teaching with Inquiry (word.doc) Classroom Activities e-Labs: CMS - Cosmic Ray Boot Camp Project Activities Databases: Data Entry (password only) 2012 Center Reporting Resources Important Findings from Previous Years Mentor Tips Associate Teacher Institute Toolkit Print Bibliography - Online Resources Imaging Detector Principles of Professionalism for Science Educators - NSTA position

173

Working group 1: Coronal streamers  

SciTech Connect

The working group on colonel streamers convened on the first day of the 2nd SOHO Workshop, which took place in Marciana Marina, Isola d`Elba, 27 September--1 October 1993. Recent progress in streamer observational techniques and theoretical modeling was reported. The contribution of streamers to the mass and energy supply for the solar wind was discussed. Moreover, the importance of thin electric current sheets for determining both the gross dynamical properties of streamers and the fine-scale filamentary structure within streamers, was strongly emphasized. Potential advances to our understanding of these areas of colonel physics that could be made by the contingent of instruments aboard SOHO were pointed out.

Kopp, R.A.

1994-04-01T23:59:59.000Z

174

http://bellview/TeamWorks/TRUTeamWorks.htm  

NLE Websites -- All DOE Office Websites (Extended Search)

9/04 9/04 Shipments expected this week: NTS (2), RFETS (13), SRS (6) January 29, 2004 The Big Story WTS restructures workforce Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e-mail. WIPP Shipments (as of 1/29/04 at 7:14 a.m.) Shipments scheduled to arrive at WIPP this week 21 Total shipments received at WIPP 2,309 Earlier this week WTS, the management and operating contractor at WIPP, announced a workforce restructuring plan to meet the current and future operational needs of the WIPP facility. It is anticipated

175

file://\\Bellview\TeamWorks\TRUTeamWorks.PDF  

NLE Websites -- All DOE Office Websites (Extended Search)

Total shipments received at WIPP as of 8-25-03: 1,956 | Shipments expected this week: Hanford Total shipments received at WIPP as of 8-25-03: 1,956 | Shipments expected this week: Hanford A weekly e-newsletter for the Waste Isolation Pilot Plant team August 25, 2003 The Big Story INEEL drum fire and Senate Bill S. 1424: questions and answers Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e -mail. WIPP Shipments (as of 8-25-03) 19 Shipments scheduled to arrive at WIPP this week 1,956 Total shipments received at WIPP Some recent media coverage has created some confusion in the public about the

176

http://bellview/TeamWorks/TRUTeamWorks.htm  

NLE Websites -- All DOE Office Websites (Extended Search)

16/03 16/03 | Shipments expected this week: ANL-E (2) , RFETS (11), SRS (6) | A weekly e-newsletter for the Waste Isolation Pilot Plant team October 16, 2003 The Big Story EM-6 to review WIPP baseline Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e-mail. WIPP Shipments (as of 10/16/03 at 7:05 a.m.) Shipments scheduled to arrive at WIPP this week 19 Total shipments received at WIPP 2,095 A team from the DOE Office of Project Management, EM-6, will be on site next week to review the WIPP baseline and the integration of that baseline with the National TRU

177

http://bellview/TeamWorks/TRUTeamWorks.htm  

NLE Websites -- All DOE Office Websites (Extended Search)

3/03 3/03 | Shipments expected this week: RFETS (11), SRS (4), Hanford (2) | A weekly e-newsletter for the Waste Isolation Pilot Plant team October 23, 2003 Sealed sources: questions and answers Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e-mail. WIPP Shipments (as of 10/23/03 at 7:06 a.m.) Shipments scheduled to arrive at WIPP this week 17 Total shipments received at WIPP 2,115 Sealed sources have been a topic of discussion lately. Here are answers to some of the questions raised by this topic:

178

http://bellview/TeamWorks/TRUTeamWorks.htm  

NLE Websites -- All DOE Office Websites (Extended Search)

Thursday, 9/11/03 | Total shipments received at WIPP: 2003 | Shipments expected this Thursday, 9/11/03 | Total shipments received at WIPP: 2003 | Shipments expected this A weekly e-newsletter for the Waste Isolation Pilot Plant team September 11, 2003 The Big Story 2003 in 2003 Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e-mail. WIPP Shipments (as of 9-11-03 at 10 a.m.) 21 Shipments scheduled to arrive at WIPP this week 2,003 Total shipments received at WIPP The 2003 rd waste shipment arrived at the WIPP site today (Thursday, September 11) from Hanford. It is highly fitting that

179

Electrochromic Glazings: How they Work  

NLE Websites -- All DOE Office Websites (Extended Search)

How they Work How they Work Electrochromic glazings have great potential to improve the energy efficiency and occupant comfort afforded by architectural windows. These smart windows can dynamically control light transmission by windows in buildings, automobiles, and aircraft. Electrochromic glazings are the most significant members of a family of chromogenic light-control technologies that includes large-area dispersed liquid crystals, dispersed particle windows, and photochromic and thermochromic materials. Electrochromic devices represent the most versatile window technology of this type, exhibiting the best combination of switching properties for chromogenic window applications. Electrochromic glazings typically have a change in visible light transmission from 10% to 70%, moderately fast switching times, and low dc power consumption. These glazings have memory, so they only need power to make a change in transmission. Electrochromic technology can be coupled with smart control systems to give constant lighting levels, blending artificial lighting with daylighting for improved building energy efficiency. Energy simulations of office buildings indicate that smart windows with lighting controls in arid climates can provide 30-40% energy savings over conventional windows. Savings are realized in cooling, lighting, and peak utility electric loads. Other benefits include smaller heating, ventilating, and air-conditioning (HVAC) systems and greater thermal and visual comfort.

180

How the Artificial Retina Works  

NLE Websites -- All DOE Office Websites (Extended Search)

the Artificial Retina Works the Artificial Retina Works Artificial Retina Diagram Normal vision begins when light enters and moves through the eye to strike specialized photoreceptor (light-receiving) cells in the retina called rods and cones. These cells convert light signals to electric impulses that are sent to the optic nerve and the brain. Retinal diseases like age-related macular degeneration and retinitis pigmentosa destroy vision by annihilating these cells. With the artificial retina device, a miniature camera mounted in eyeglasses captures images and wirelessly sends the information to a microprocessor (worn on a belt) that converts the data to an electronic signal and transmits it to a receiver on the eye. The receiver sends the signals through a tiny, thin cable to the microelectrode array, stimulating it to emit pulses. The artificial retina device thus bypasses defunct photoreceptor cells and transmits electrical signals directly to the retina's remaining viable cells. The pulses travel to the optic nerve and, ultimately, to the brain, which perceives patterns of light and dark spots corresponding to the electrodes stimulated. Patients learn to interpret these visual patterns.

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Exascale Hardware Architectures Working Group  

Science Conference Proceedings (OSTI)

The ASC Exascale Hardware Architecture working group is challenged to provide input on the following areas impacting the future use and usability of potential exascale computer systems: processor, memory, and interconnect architectures, as well as the power and resilience of these systems. Going forward, there are many challenging issues that will need to be addressed. First, power constraints in processor technologies will lead to steady increases in parallelism within a socket. Additionally, all cores may not be fully independent nor fully general purpose. Second, there is a clear trend toward less balanced machines, in terms of compute capability compared to memory and interconnect performance. In order to mitigate the memory issues, memory technologies will introduce 3D stacking, eventually moving on-socket and likely on-die, providing greatly increased bandwidth but unfortunately also likely providing smaller memory capacity per core. Off-socket memory, possibly in the form of non-volatile memory, will create a complex memory hierarchy. Third, communication energy will dominate the energy required to compute, such that interconnect power and bandwidth will have a significant impact. All of the above changes are driven by the need for greatly increased energy efficiency, as current technology will prove unsuitable for exascale, due to unsustainable power requirements of such a system. These changes will have the most significant impact on programming models and algorithms, but they will be felt across all layers of the machine. There is clear need to engage all ASC working groups in planning for how to deal with technological changes of this magnitude. The primary function of the Hardware Architecture Working Group is to facilitate codesign with hardware vendors to ensure future exascale platforms are capable of efficiently supporting the ASC applications, which in turn need to meet the mission needs of the NNSA Stockpile Stewardship Program. This issue is relatively immediate, as there is only a small window of opportunity to influence hardware design for 2018 machines. Given the short timeline a firm co-design methodology with vendors is of prime importance.

Hemmert, S; Ang, J; Chiang, P; Carnes, B; Doerfler, D; Leininger, M; Dosanjh, S; Fields, P; Koch, K; Laros, J; Noe, J; Quinn, T; Torrellas, J; Vetter, J; Wampler, C; White, A

2011-03-15T23:59:59.000Z

182

Hot-Work Tool Steels  

Science Conference Proceedings (OSTI)

Table 9   Recommended heat-treating practices for hot-work tool steels...1600 ? O, A 58??59 6F6 Not rec 845 (pack) 1550 (peak) (p) (p) 196 650??705 (1200??1300) (q) 925??955 (q) 1700??1750 (q) ? O (r) (s) 6F7 845??870 (1550??1600) 670 1240 22 40 260??300 730 (1350) 915 1675 ? A 54??55 6H1 Not rec 845 1550 22 (t) 40 (t) 202??235 760??790 (1400??1450) 900??940 1650??1725 ? A 48??49 6H2...

183

TWRS Systems Engineering Working Plan  

SciTech Connect

The purpose of this Systems Engineering (SE) Working Plan (SEWP) is to describe how the Westinghouse Hanford Company (WHC) Tank Waste Remediation System (TWRS) will implement the SE polity and guidance provided in the Tank Waste Remediation System (TWRS) Systems Engineering Management Plan (SEMP). Sections 2.0 through 4.0 cover how the SE process and management will be performed to develop a technical baseline within TWRS. Section 5.0 covers the plans and schedules to implement the SE process and management within TWRS. Detailed information contained in the TWRS Program SEMP is not repeated in this document. This SEWP and the SE discipline defined within apply to the TWRS Program and new and ongoing TWRS projects or activities, including new facilities and safety. The SE process will be applied to the existing Tank Farm operations where the Richland TWRS Program Office management determines the process appropriate and where value will be added to existing Tank Farm system and operations.

Eiholzer, C.R.

1994-09-16T23:59:59.000Z

184

FY 1996 annual work plan  

SciTech Connect

In April 1994, the Department of Energy (DOE) Strategic Plan was issued. This Plan presents the Department`s strategic outlook in response to a changing world. It discusses the Department`s unique capabilities; its mission, vision, and core values; and key customer and stakeholder considerations. The DOE Strategic Plan lists business strategies and critical success factors which are intended to aid the Department in accomplishing its mission and reaching its vision of itself in the future. The Office of Inspector General (OIG) has an important role in carrying out the goals and objectives of the Secretary`s Strategic Plan. The ultimate goal of the OIG is to facilitate positive change by assisting its customers, responsible Government officials, in taking actions to improve programs and operations. The Inspector General annually issues his own Strategic Plan that contains program guidance for the next fiscal year. As part of its responsibility in carrying out the OIG mission, the Office of the Deputy Inspector General for Audit Services (Office of Audit Services) publishes an Annual Work Plan that sets forth audits that are planned for the next fiscal year. Selection of these audits is based on the overall budget of the Department, analyses of trends in Departmental operations, guidance contained in the agency`s strategic plans, statutory requirements, and the expressed needs and audit suggestions of Departmental program managers and OIG managers and staff. This work plan includes audits that are carried over from FY 1995 and audits scheduled to start during FY 1996. Audits included in the plan will be performed by OIG staff.

1995-09-30T23:59:59.000Z

185

http://bellview/TeamWorks/TRUTeamWorks.htm  

NLE Websites -- All DOE Office Websites (Extended Search)

9/03 | Shipments expected this week: Hanford (1), RFETS (11), SRS (6) | 9/03 | Shipments expected this week: Hanford (1), RFETS (11), SRS (6) | A weekly e-newsletter for the Waste Isolation Pilot Plant team October 9, 2003 The Big Story It's a whole new "WIPP Experience" Topics Characterization News Transportation News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e- mail. WIPP Shipments (as of 10/9/03 at 7:24 a.m.) Shipments scheduled to arrive at WIPP this week 18 Total shipments received at WIPP 2,081 If you haven't been to the SWB lately, you are in for a big surprise. The lobby sports a new look these days, complete with banners and updated exhibits. And the new look isn't just

186

file://\\Bellview\TeamWorks\TRUTeamWorks.htm  

NLE Websites -- All DOE Office Websites (Extended Search)

30/03 Shipments expected this week: RFETS (11), SRS (4), Hanford (2) 30/03 Shipments expected this week: RFETS (11), SRS (4), Hanford (2) A weekly e-newsletter for the Waste Isolation Pilot Plant team October 30, 2003 ARROW-PAK Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e- mail. WIPP Shipments (as of 10/30/03 at 6:59 a.m.) Shipments scheduled to arrive at WIPP this week 17 Total shipments received at WIPP 2,129 You've heard of the TRUPACT-II, the pipe overpack, the RH-72B and even the 10- 160B. But have you heard about the ARROW-PAK? ARROW-PAK is a transportation container designed to contain and transport high-wattage TRU waste.

187

TeamWorks12-02-04  

NLE Websites -- All DOE Office Websites (Extended Search)

Team TRU Works Works TeamWorks Shipments Scheduled to arrive 120504 - 121104: 28 Hanford - 3 LLNL - 2 NTS - 2 RFETS - 16 SRS - 4 (subject to change) 3,167 total shipments...

188

Graduate Program Time Limits and Work Schedules  

NLE Websites -- All DOE Office Websites (Extended Search)

Time Limits and Work Schedules Graduate Program Time Limits and Work Schedules Point your career towards LANL: work with the best minds on the planet in an inclusive environment...

189

Fuel Cell Technologies Office: Catalysis Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Catalysis Working Catalysis Working Group to someone by E-mail Share Fuel Cell Technologies Office: Catalysis Working Group on Facebook Tweet about Fuel Cell Technologies Office: Catalysis Working Group on Twitter Bookmark Fuel Cell Technologies Office: Catalysis Working Group on Google Bookmark Fuel Cell Technologies Office: Catalysis Working Group on Delicious Rank Fuel Cell Technologies Office: Catalysis Working Group on Digg Find More places to share Fuel Cell Technologies Office: Catalysis Working Group on AddThis.com... Key Activities Plans, Implementation, & Results Accomplishments Organization Chart & Contacts Quick Links Hydrogen Production Hydrogen Delivery Hydrogen Storage Fuel Cells Technology Validation Manufacturing Codes & Standards Education Systems Analysis

190

State & Tribal Government Working Group (STGWG) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tribal Programs State & Tribal Government Working Group (STGWG) State & Tribal Government Working Group (STGWG) In April 1989, ten governors wrote a letter to then-Secretary of...

191

Renewable Energy Working Group: October 19, 2011  

NLE Websites -- All DOE Office Websites (Extended Search)

eere.energy.gov Federal Energy Management Program October 2011 Open Meeting of the Renewable Energy Working Group Anne Crawley Technology Manager Renewable Energy Working Group...

192

Climate VISION: Private Sector Initiatives: Semiconductors: Work...  

Office of Scientific and Technical Information (OSTI)

Work Plans The Semiconductor Industry Association has finalized its work plan with the collaboration of EPA. The plan describes actions the industry intends to take to achieve its...

193

How Radar Works | Open Energy Information  

Open Energy Info (EERE)

2013 DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for How Radar Works Citation Institute For Geophysics. How Radar Works...

194

Work and Car Ownership Among Welfare Recipients  

E-Print Network (OSTI)

Work and Car Ownership Among Welfare Recipients Paul Ongregulation. or Work and Car Ownership Among Welfareexamining the pivotal role of car ownershipin facilitating

Ong, Paul

1995-01-01T23:59:59.000Z

195

Federal Energy Management Program: Product Procurement Working...  

NLE Websites -- All DOE Office Websites (Extended Search)

Product Procurement Working Group to someone by E-mail Share Federal Energy Management Program: Product Procurement Working Group on Facebook Tweet about Federal Energy Management...

196

Transportation Protocols Working Group First Conference Call...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Call March 1, 1999 Conference Call Summary The first conference call of the Transportation External Coordination Working Group (TECWG) DOE Transportation Protocols Working...

197

SolarWorks NJ | Open Energy Information  

Open Energy Info (EERE)

Jersey Sector Renewable Energy, Solar Product SolarWorks NJ, LLC, a provider of turnkey solar electricity installations and renewable energy solutions. References SolarWorks...

198

Working with CFTF | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

CFTF Working with CFTF CFTF | Carbon Fiber Technology Facility Home | User Facilities | CFTF | Working with CFTF SHARE Low-Cost Carbon Fiber Available to US Manufacturers for...

199

Underground Natural Gas Working Storage Capacity - Energy ...  

U.S. Energy Information Administration (EIA)

... Demonstrated maximum working gas volume is the sum of the highest storage inventory levels of working gas observed in each facility over the previous 5-year ...

200

NREL: Electricity Integration Research - Working With Us  

NLE Websites -- All DOE Office Websites (Extended Search)

Working With Us NREL offers industry, universities, and other government agencies opportunities to leverage NREL's research expertise. Working with outside organizations is the key...

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Fermilab at Work - Manuals and Forms  

NLE Websites -- All DOE Office Websites (Extended Search)

Fermilab at Work Home Home FAW Home Fermilab Now Directories and Maps Work Resources Policies and Forms Administration Lab Life Physics Links Experiments and Projects Divisions and...

202

Argonne TDC: Sponsored Research (Work for Others)  

Sponsored Research (Work for Others) Argonne National Laboratory can perform work for a number of different Federal and non-Federal sponsors. These ...

203

Master of Social Work Program STUDENT HANDBOOK  

E-Print Network (OSTI)

Master of Social Work Program STUDENT HANDBOOK 2013-2014 Academic Year #12;TABLE OF CONTENTS SECTION I: MU-SU MSW PROGRAM ............................................................................................ 1 SOCIAL WORK EDUCATION

Hardy, Christopher R.

204

California Working Natural Gas Underground Storage Capacity ...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) California Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

205

Mississippi Working Natural Gas Underground Storage Capacity...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Mississippi Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

206

Pennsylvania Working Natural Gas Underground Storage Capacity...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Pennsylvania Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

207

Washington Working Natural Gas Underground Storage Capacity ...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Washington Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

208

Working With Us - Center for Transportation Analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

Working With Us Types of working agreements Cooperative Research and Development Agreement (CRADA) DOE typically pays the lab costs. The private-sector partner can provide either...

209

Current work in energy analysis  

SciTech Connect

This report describes the work performed at Berkeley Lab most recently. One of the Labs accomplishments is the publication of Scenarios of US Carbon Reductions, an analysis of the potential of energy technologies to reduce carbon emissions in the US. This analysis is described and played a key role in shaping the US position on climate change in the Kyoto Protocol negotiations. The Labs participation in the fundamental characterization of the climate change issue by the IPCC is described. Described also is a study of leaking electricity, which is stimulating an international campaign for a one-watt ceiling for standby electricity losses from appliances. This ceiling has the potential to save two-thirds of the 5% of US residential electricity currently expended on standby losses. The 54 vignettes contained in the report summarize results of research activities ranging in scale from calculating the efficacy of individual lamp ballasts to estimating the cost-effectiveness of the national Energy Star{reg_sign} labeling program, and ranging in location from a scoping study of energy-efficiency market transformation in California to development of an energy-efficiency project in the auto parts industry in Shandong Province, China.

NONE

1998-03-01T23:59:59.000Z

210

Accumulated waste characterization work plan  

Science Conference Proceedings (OSTI)

The Portsmouth Gaseous Diffusion Plant (PORTS) as part of the uranium enrichment complex produces enriched uranium for power generation and defense purposes. Since the beginning of diffusion plant operations in 1953, a variety of waste materials and excess equipment has been generated through both normal operations and as part of major system upgrade programs. However, as a result of the closure of former onsite radioactive management facilities and limited onsite and offsite disposal facilities for mixed (hazardous and radioactive) wastes, PORTS has accumulated large quantities of waste awaiting final disposition. These accumulated wastes were estimated in the Accumulated Waste Plan (AWP) to consist of some 21,700 containers of the radioactive, RCRA hazardous, PCB, mixed and asbestos wastes in various storage areas and process buildings with PORTS. In order to proper manage these wastes onsite and prepare for them for ultimate treatment or disposal, a detailed understanding of the waste contents and characteristics must be developed. The strategy for managing and disposing of these wastes was outlined in the AWP. The purpose of this Accumulated Waste Characterization Work Plan (AWCWP) is to provide a detailed plan for characterizing waste containers from the existing PORTS inventory. The AWCWP documents the process and analytical information currently available and describes statistically-based sampling and analyses required to support proper regulatory classification.

Not Available

1992-01-01T23:59:59.000Z

211

Standards Working Groups - Safety and Operating ...  

Science Conference Proceedings (OSTI)

*. Bookmark and Share. Safety and Operating Environment Working Group. Scope: These two areas have been combined ...

2010-12-27T23:59:59.000Z

212

Sandia National Laboratories: Working with Sandia: Registration  

Energy, Climate, & Infrastructure Security; International, Homeland, & Nuclear Security; Working With Sandia; Procurement; Technology Partnerships;

213

Technical Working Group on Biological Evidence Preservation  

Science Conference Proceedings (OSTI)

Technical Working Group on Biological Evidence Preservation. ... Sexual Assault Forensic Examiner Technical Assistance, National Protocol; ...

2013-06-28T23:59:59.000Z

214

Fuel Cell Technologies Office: Photoelectrochemical Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

About About Printable Version Share this resource Send a link to Fuel Cell Technologies Office: Photoelectrochemical Working Group to someone by E-mail Share Fuel Cell Technologies Office: Photoelectrochemical Working Group on Facebook Tweet about Fuel Cell Technologies Office: Photoelectrochemical Working Group on Twitter Bookmark Fuel Cell Technologies Office: Photoelectrochemical Working Group on Google Bookmark Fuel Cell Technologies Office: Photoelectrochemical Working Group on Delicious Rank Fuel Cell Technologies Office: Photoelectrochemical Working Group on Digg Find More places to share Fuel Cell Technologies Office: Photoelectrochemical Working Group on AddThis.com... Key Activities Plans, Implementation, & Results Accomplishments Organization Chart & Contacts

215

NREL: Distributed Grid Integration - Working with Us  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with Us Working with Us NREL's electric infrastructure systems research involves industry, academia, other national laboratories, and various standards organizations through collaborative work and the use of our facilities. Collaborative Work To engage in collaborative work for NREL's distributed energy integration systems, you can: Work with NREL through Cooperative Research and Development Agreements (CRADAs). This is the most widely used means of industrial collaboration. Participate in subcontracted research. More than half of NREL's budget supports DOE-directed research conducted by large and small private companies, universities, research institutes, and consultants. Pay NREL to conduct research independently through Work for Others (WFOs) or Sponsored Research.

216

Electrochemical removal of material from metallic work  

DOE Patents (OSTI)

Deburring, polishing, surface forming and the like are carried out by electrochemical machining with conformable electrode means including an electrically conducting and an insulating web. The surface of the work to be processed is covered by a deformable electrically insulating web or cloth which is perforated and conforms with the work. The web is covered by a deformable perforated electrically conducting screen electrode which also conforms with, and is insulated from, the work by the insulating web. An electrolyte is conducted through the electrode and insulating web and along the work through a perforated elastic member which engages the electrode under pressure pressing the electrode and web against the work. High current under low voltage is conducted betwen the electrode and work through the insulator, removing material from the work. Under the pressure of the elastic member, the electrode and insulator continue to conform with the work and the spacing between the electrode and work is maintained constant.

Csakvary, Tibor (Wilkens Township, Allegheny County, PA); Fromson, Robert E. (Wilkens Township, Allegheny County, PA)

1980-05-13T23:59:59.000Z

217

Work-Life Balance | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Work-Life Balance Work-Life Balance Balancing work and life means prioritizing what is important to you. Argonne supports employees who want to coordinate work, home and community activities. Lab-provided benefits that help you do that include on-site child care, a credit union, flexible work schedules, generous leave and vacation programs, and much more. A wide variety of social clubs at Argonne promote fellowship and diversity. You can work at Argonne and also have a life of interest and fulfillment. "I have good work-life balance. I spend my workday devoted to my work, and when I go home, I'm able to have a life outside work. I used to play soccer, so I'm looking to join a women's soccer team in the Chicago suburbs." - Emily Wolters, Nuclear Engineer Argonne understands that employment decisions often involve your

218

Training Work Group Charter | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Charter Charter Training Work Group Charter The Training Work Group fosters improvements in the quality, efficacy, and delivery of DOE safety training, and realizes significant efficiencies by minimizing redundancies across the DOE Complex. The Work Group provides a collaborative opportunity for DOE to gain insights from operating contractors, the contractor work force and their representatives, and to combine the best wisdom to assure that the most efficient and effective worker health and safety program expectations, approaches and processes are in place and are well communicated. Training Work Group Charter More Documents & Publications HSS Briefing to the Defense Nuclear Facilities Safety Board (DNFSB) on Union Activities 10 CFR 851 Implementation Work Group Charter

219

Work For Others Agreements | Partnerships | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

were granted the authority to perform work for others by the Atomic Energy Act of 1954 Public Law 83-703; 42 USC 2053. Work For Others programs at the DOE national...

220

Better Buildings Neighborhood Program: Community Power Works...  

NLE Websites -- All DOE Office Websites (Extended Search)

Power Works' Success Opens Doors to its Future to someone by E-mail Share Better Buildings Neighborhood Program: Community Power Works' Success Opens Doors to its Future on...

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Car Ownership and Welfare-to-Work  

E-Print Network (OSTI)

Problems Related to Child Car, Transportation, and IllnessCar Ownership and Welfare-to-Work Paul M Ong Reprint UCTC Nofor conte~ts thereof oruse Car Ownership and Welfare-to-Work

Ong, Paul M.

2001-01-01T23:59:59.000Z

222

Peak Underground Working Natural Gas Storage Capacity  

Gasoline and Diesel Fuel Update (EIA)

Note: 1) 'Demonstrated Peak Working Gas Capacity' is the sum of the highest storage inventory level of working gas observed in each facility over the prior 5-year period as...

223

Elements of doing work at SSRL (rev  

NLE Websites -- All DOE Office Websites (Extended Search)

doing work at SSRL Goals: 1. Work effectively, efficiently and safely 2. Compliance with DOE Directives as stated in on ES&H ISEMS web site: http:www-group.slac.stanford.edu...

224

SOCIAL WORK PROGRAM California State University  

E-Print Network (OSTI)

SOCIAL WORK PROGRAM California State University Fullerton, CA Handbook for Students 2009-2010 Third ...............................................................................................7 SOCIAL WORK PROGRAM GOALS academic programs. #12;2 TABLE OF CONTENTS IMPORTANT TELEPHONE NUMBERS

de Lijser, Peter

225

EnerWorks Inc | Open Energy Information  

Open Energy Info (EERE)

EnerWorks Inc Jump to: navigation, search Name EnerWorks Inc Place Ontario, Canada Zip NOL 1GO Sector Solar Product Ontario-based solar water heating system manufacturer and...

226

EM QA Working Group September 2011 Notes  

Energy.gov (U.S. Department of Energy (DOE))

Meeting minutes and notes from the EM QA Working Group video conference meeting held in September 2011.

227

Prior NIST Work in Public Safety Communications  

Science Conference Proceedings (OSTI)

... Prior NIST Work in Public Safety Communications. ... Distributed Testbed for First Responders; Guide to Public Safety Communication Technologies.

2013-05-26T23:59:59.000Z

228

Summary of the Heavy Flavours Working Group  

E-Print Network (OSTI)

This is a summary of the contributions presented in the Heavy Flavours Working Group of the DIS2006 Workshop.

U. Karshon; I. Schienbein; P. Thompson

2006-08-10T23:59:59.000Z

229

Peak Underground Working Natural Gas Storage Capacity  

U.S. Energy Information Administration (EIA)

Peak Working Natural Gas Capacity. Data and Analysis from the Energy Information Administration (U.S. Dept. of Energy)

230

Sandia National Laboratories: Working with Sandia: Technology ...  

R&D 100 Awards; International Programs; Laboratory Directed Research & Development; Technology Deployment Centers; Working With Sandia. PROCUREMENT; Opportunities;

231

Sandia National Laboratories: Working with Sandia: Procurement ...  

R&D 100 Awards; International Programs; Laboratory Directed Research & Development; Technology Deployment Centers; Working With Sandia. PROCUREMENT; Opportunities;

232

Lighting Type at Home and at Work  

Reports and Publications (EIA)

Information on what types of lights are used at home and at work (data from 1995 CBECS and 1993 RECS).

Information Center

1998-01-15T23:59:59.000Z

233

Temporality in Medical Work: Time also Matters  

Science Conference Proceedings (OSTI)

CSCW has long been concerned with the distribution of activities in time and in space, but the problems of distributed work have often taken analytic and technical precedence. In this paper, we are interested in the issue of temporality in collaborative ... Keywords: collaborative work, information seeking, medical work, temporality

Madhu C. Reddy; Paul Dourish; Wanda Pratt

2006-02-01T23:59:59.000Z

234

EPRI Live Working Reference Book, Third Edition  

Science Conference Proceedings (OSTI)

This report is a fully revised, updated, and expanded edition of the EPRI Live Working Reference Book, Second Edition (1024479), published by EPRI in 2011. The EPRI Live Working Reference Book, Third Edition provides the utility industry with a single, comprehensive, updated guidebook on live working standards, tools, and procedures.Results and ...

2012-12-31T23:59:59.000Z

235

EPRI Live Working Reference Book, Ed. 4  

Science Conference Proceedings (OSTI)

This report is a fully revised, updated, and expanded edition of the EPRI Live Working Reference Book, Third Edition (1024142), published by EPRI in 2012. The EPRI Live Working Reference Book, Fourth Edition (3002000891) provides the utility industry with a single, comprehensive, updated guidebook on live working standards, tools, and procedures.BackgroundDeregulation demands higher levels of ...

2013-12-27T23:59:59.000Z

236

Stakeholder Engagement and Outreach: Wind Working Groups  

Wind Powering America (EERE)

Information Information Resources Printable Version Bookmark and Share Publications Success Stories Webinars Podcasts Videos Stakeholder Interviews Lessons Learned Wind Working Groups Economic Impact Studies Wind Turbine Ordinances Wind Working Groups Wind Powering America educates, equips, and supports state wind working groups that form strategic alliances to communicate wind's benefits and challenges to state stakeholders. State Wind Working Groups The U.S. map below shows which states have wind working groups. Click on a state to read about its wind working group. Text version of states with Wind Working Groups Alaska Arizona Arkansas Colorado Connecticut Georgia Hawaii Idaho Illinois Indiana Kansas Kentucky Maine Massachusetts Michigan Montana Nebraska Nevada New Jersey New Mexico North Carolina

237

Undergraduate Program Time Limits and Work Schedules  

NLE Websites -- All DOE Office Websites (Extended Search)

Time Limits and Work Schedules Time Limits and Work Schedules Undergraduate Program Time Limits and Work Schedules Point your career towards LANL: work with the best minds on the planet in an inclusive environment that is rich in intellectual vitality and opportunities for growth. Contact Student Programs (505) 665-8899 Email Time limits The length of participation in the undergraduate program is limited to a maximum of six years for students pursuing a bachelor's degree and three years for students pursuing an associate's degree. Work schedules Year-round students Students participating in some special undergraduate programs, post-baccalaureate appointments, post-master's appointments, and GRA students working on a thesis or dissertation are excluded from the 30-hour per week work restriction.

238

Renewable Energy Working Group | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Working Group Working Group Renewable Energy Working Group October 7, 2013 - 10:17am Addthis The Renewable Energy Working Group provides a forum for Federal agencies and the renewable energy industry to exchange information on existing and planned projects, lessons learned, sources of project funds, and technologies. Guidance The Renewable Energy Working Group is charged with providing guidance about renewable energy regulatory requirements. Federal Renewable Energy Requirement Guidance Under EPAct 2005 and Executive Order 13423 Transmittal Letter Summarizing the Federal Renewable Energy Requirement Guidance Members Led by the Federal Energy Management Program, the Renewable Energy Working Group is made up of more than 100 Federal agency representatives, U.S. Department of Energy programs, and the renewable energy industry.

239

HQ Work Control Permit | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HQ Work Control Permit HQ Work Control Permit HQ Work Control Permit To ensure safe operations when undertaking work at DOE Headquarters, the Office of Headquarters Health and Safety has developed a Work Permit document (doc) to help ensure the safety of all workers and headquarters employees. The form should be completed and brought to the Office of Headquarters Safety, Health and Security office at GE-112 at the Forrestal facility, or the Germantown Building Manager's office at E-076 for review and sign off. Any questions can be directed to the HQ Health and Safety office on (202) 586-1005. HQ_Work_Control_Permit.docx More Documents & Publications Preliminary Notice of Violation, Petsco and Son, Inc - EA-96-06 OSS 19.10 Barriers and Postings 5/26/95 OSS 19.3 Confined Space Entry 5/23/95

240

HQ Work Control Permit | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HQ Work Control Permit HQ Work Control Permit HQ Work Control Permit To ensure safe operations when undertaking work at DOE Headquarters, the Office of Headquarters Health and Safety has developed a Work Permit document (doc) to help ensure the safety of all workers and headquarters employees. The form should be completed and brought to the Office of Headquarters Safety, Health and Security office at GE-112 at the Forrestal facility, or the Germantown Building Manager's office at E-076 for review and sign off. Any questions can be directed to the HQ Health and Safety office on (202) 586-1005. HQ_Work_Control_Permit.docx More Documents & Publications Preliminary Notice of Violation, Petsco and Son, Inc - EA-96-06 OSS 19.3 Confined Space Entry 5/23/95 WA_02_026_UNITED_TECHNOLOGIES_Waiver_of_Domestic_and_Foreign

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Geophysical survey work plan for White Wing Scrap Yard (Waste Area Grouping 11) at Oak Ridge National Laboratory, Oak Ridge, Tennessee  

SciTech Connect

The White Wing Scrap Yard, located on the U.S. Department of Energy`s Oak Ridge Reservation, served as an aboveground storage and disposal area for contaminated debris and scrap from the Oak Ridge K-25 Site, the Oak Ridge Y-12 Plant, and the Oak Ridge National laboratory. The site is believed to have been active from the early 1950s until the mid-1960s. A variety of materials were disposed of at the site, including contaminated steel tanks and vehicles. As an interim corrective action, a surface debris removal effort was initiated in November 1993 to reduce the potential threat to human health and the environment from the radionuclide-contaminated debris. Following this removal effort, a geophysical survey will be conducted across the site to locate and determine the lateral extent of buried nonindigenous materials. This survey will provide the data necessary to prepare a map showing areas of conductivity and magnetic intensity that vary from measured background values. These anomalies represent potential buried materials and therefore can be targeted for further evaluation. This work plan outlines the activities necessary to conduct the geophysical survey.

Not Available

1994-02-01T23:59:59.000Z

242

Shift Work and Potential Health Effects  

Science Conference Proceedings (OSTI)

The objective of this report is to inform the electric power industry of current scientific knowledge on worker health and safety risks associated with shift work in order to support future research planning. Shift work has been found to be associated with increased cancer risks8212primarily of breast cancer and (to a lesser extent) prostate and colon cancer. Risk of occupational injuries increases with several common characteristics of shift work8212particularly rotating shifts and longer shift lengths....

2011-10-31T23:59:59.000Z

243

Ropes for Live Working and Energized Rescue  

Science Conference Proceedings (OSTI)

EPRI's Ropes for Live Working report (1015912, 2008) was the culmination of several years of research on the subject of live working ropes. As part of that research, some 45 samples of 12 different ropes were tested electrically at the EPRI-Lenox laboratory. The objective of the 2011 project, summarized in this report, was to identify performance requirements of rope suitable for live work and energized rescue. Based on experience in other disciplines, particularly mountaineering, Kernmantle rope is sui...

2011-12-16T23:59:59.000Z

244

Working with Interpreters | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Working with Interpreters | National Nuclear Security Administration Working with Interpreters | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog The National Nuclear Security Administration Working with Interpreters Home > About Us > Our Programs > Defense Programs > Future Science & Technology Programs > Office of Advanced Simulation and Computing and

245

TRUTeamWorks 06-24-04  

NLE Websites -- All DOE Office Websites (Extended Search)

nuclear waste repository program to assist with these challenges is also in the works." "WIPP is, of course, the only operational geological repository in the world,"...

246

Fuel Cell Technologies Office: Photoelectrochemical Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Photoelectrochemical Working Group Photoelectrochemical Working Group Promising PEC Materials The PEC Working Group invites the international research community to assist in the development of PEC Materials White Papers to track the research status of the most promising materials classes for solar water splitting. The Photoelectrochemical Working Group meets regularly to review technical progress, develop synergies, and collaboratively develop common tools and processes for photoelectrochemical (PEC) water splitting. Its members include principal investigators and supporting personnel from U.S. Department of Energy (DOE)-funded photoelectrochemical projects. More information on planned DOE photoelectrochemical activities can be found in the Multi-Year Research, Development, and Demonstration Plan.

247

TEC Working Group Background | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TEC Working Group Background TEC Working Group Background TEC Working Group Background Through the TEC/WG, DOE interacted with representatives of organizations at the state, tribal, and local levels to obtain input for program needs assessment, development and management, and to enhance their capability to carry out transportation emergency preparedness and safety activities specifically related to radioactive materials shipments. TEC membership included representatives from national, state, tribal and local government organizations, labor, industry and professional groups. Members meet semiannually to participate in plenary sessions, breakout work sessions, and in more specialized Topic Groups. To learn more about the history and background of TEC, please see the following documents:

248

Argonne TDC: Work for Others Program - ANL  

Identify In-house Project Support: 3 : Draft Statement of Work (SOW) with milestones. 4: Submit WFO information to DOE Operations Office Send Draft WFO Agreement to ...

249

Underground Natural Gas Working Storage Capacity - Energy ...  

U.S. Energy Information Administration (EIA)

... (see Table 1), and why any given week's storage ... Demonstrated maximum working gas volume is the sum of the highest storage inventory levels of ...

250

NREL: Solar Radiation Research - Working with Us  

NLE Websites -- All DOE Office Websites (Extended Search)

solar technologies into the clean energy market. There are many ways to work with NREL's solar radiation research program. Developing Technology Partnerships NREL offers a variety...

251

Fuel Cell Technologies Office: Durability Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

About Printable Version Share this resource Send a link to Fuel Cell Technologies Office: Durability Working Group to someone by E-mail Share Fuel Cell Technologies Office:...

252

NREL: Process Development and Integration Laboratory - Working...  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with Us The Process Development and Integration Laboratory (PDIL), which accommodates the process development and integration approach, facilitates collaborative projects...

253

TRU TeamWorks - August 14, 2003  

NLE Websites -- All DOE Office Websites (Extended Search)

aligning work with mission and requirements. Knerr presented recommendations last week to Jessie Roberson, Assistant Secretary for EM, with confidence they are "good for the...

254

Work Management Improvement at Louisa Generating Station  

Science Conference Proceedings (OSTI)

This report describes results of a Work Management Improvement project at the Louisa Generating Station, MidAmerican Energy Company, Muscatine, Iowa.

2001-11-19T23:59:59.000Z

255

Car Access and Welfare-To-Work  

E-Print Network (OSTI)

Problems Related to Child Car, Transportation, and Illness30. March. Ong, Paul "Work and Car Ownership Among WelfareRice (2000). "The Effect of Car Ownershipon the Employment

Ong, Paul M.

2002-01-01T23:59:59.000Z

256

Working and Net Available Shell Storage Capacity  

U.S. Energy Information Administration (EIA)

Containing storage capacity data for crude oil, petroleum products, and selected biofuels. The report includes tables detailing working and net available shell ...

257

NNSA's Sequoia Supercomputer Transitions to Classified Work,...  

NLE Websites -- All DOE Office Websites (Extended Search)

Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home >...

258

Fermilab at Work | Experiments and Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

Working Group U.S. Long-Baseline Neutrino Experiment Study U.S. Lattice QCD Very Large Hadron Collider WFIRST Accelerator Experiments FermilabNICADD Photoinjector Laboratory...

259

Wind Working Group Toolkit | Open Energy Information  

Open Energy Info (EERE)

state Wind Working Groups to conduct these information-sharing activities. In 2013, DOE funded an independent analysis 1 of the WPA initiative. Interviewees identified two...

260

NREL: Water Power Research - Working with Us  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Center (NWTC) has an outstanding performance record for working with the wind industry to advance wind turbine science and lower the cost of wind-generated electricity...

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Work Plans & Manuals | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Reports Calendar Year Reports Recovery Act Peer Reviews DOE Directives Performance Strategic Plan Testimony Financial Statements Semiannual Reports Work Plan Mission About Us...

262

Working With the Federal Fleets (Presentation)  

Science Conference Proceedings (OSTI)

Presentation about federal fleet data, working with the federal government, and results from a survey of Clean Cities coordinators about their experiences with regulated fleets.

Daley, R.

2010-10-25T23:59:59.000Z

263

City of Nashville- Energy Works Rebate Program  

Energy.gov (U.S. Department of Energy (DOE))

The Nashville Energy Works Program offers residents in Nashville rebates for implementing energy efficient improvements in their homes. To qualify for this rebate, homeowners must receive an energy...

264

Work: An educational alternative to schooling  

Science Conference Proceedings (OSTI)

The educational establishment in America faces serious problems. The ... The first level at which an alternative program of work could function is the home.

265

WANT TO STUDY AND WORK IN Now you can with the Work Study Program!  

E-Print Network (OSTI)

WANT TO STUDY AND WORK IN GERMANY? Now you can with the Work Study Program! Werkstudentenprogramm in the Work Study Program include: Opportunity to broaden German language skills and develop a strong.cautg.org/wsp Eligible Canadian Summer School in Germany (CSSG) students may apply to participate in the Work Study

Peak, Derek

266

Master of Social Work Why a Master of Social Work at CSUF?  

E-Print Network (OSTI)

on Social Work Education (CSWE) · The only MSW program offered at a public university in Orange County the CSUF MSW Program · The mission of the newly developing Master of Social Work (MSW) program at CSUFMaster of Social Work At CSUF #12;Why a Master of Social Work at CSUF? · Accredited by the Council

de Lijser, Peter

267

Mobile digital calendars in knowledge work  

Science Conference Proceedings (OSTI)

This article investigates the usage of mobile digital-calendar solutions in a knowledge work setting through the means of an empirical survey (n = 220) among managers and experts in a global telecommunications company. It is indicated, that the mobile digital ... Keywords: PIM, calendar use, digital calendars, electronic calendaring, electronic scheduling, global telecommunications, knowledge work, mobile calendars, mobile communications, mobile computing, personal information management

Anna Sell

2008-08-01T23:59:59.000Z

268

Second Proof Work, Power, and Energy  

E-Print Network (OSTI)

Administration. (2001). ``Annual Energy Review 2001.'' U.S. Department of Energy, Washington, DC. T0025 TABLE V. (2001). ``Annual Energy Review 2001.'' U.S. Department of Energy, Washington, DC. P0140 Work, Power Administration. (2001). ``Annual Energy Review 2001.'' U.S. Department of Energy, Washington, DC. P0145 536 Work

Kostic, Milivoje M.

269

Building boundaries and negotiating work at home  

Science Conference Proceedings (OSTI)

Millions of people are now working full-or part-time at home. Computer technology allows workers remote access to materials and facilitates communication with coworkers and supervisors. Companies are developing telecommuting programs to benefit both ... Keywords: boundaries, groups, home, telecommuting, telework, virtual environments, work

Christine Salazar

2001-09-01T23:59:59.000Z

270

Live Work with High Temperature Conductors  

Science Conference Proceedings (OSTI)

This report examines issues that may arise when live work is undertaken on conductors that operate at high temperatures (HT conductors) and provides the results from selected tests on the temperature levels reached by tools in contact with hot conductors. It also discusses possible concerns that may arise during de-energized work on lines that use HT conductors.

2009-12-15T23:59:59.000Z

271

Graduate Program Time Limits and Work Schedules  

NLE Websites -- All DOE Office Websites (Extended Search)

Time Limits and Work Schedules Time Limits and Work Schedules Graduate Program Time Limits and Work Schedules Point your career towards LANL: work with the best minds on the planet in an inclusive environment that is rich in intellectual vitality and opportunities for growth. Contact Student Programs (505) 665-8899 Email Time Limits The length of participation in the graduate program is limited as follows: With a bachelor's pursuing a master's degree: 4 years With a bachelor's pursuing a PhD: 7 years With a master's pursuing a second master's degree: 2 years With a master's pursuing a PhD: 4 years With a master's pursuing a master's and PhD in a new field: 6 years Students may remain in the GRA program for up to three months after receiving their PhD. Work schedules Year-round students Students participating in the MBA program, post-baccalaureate appointments,

272

Working at NNSA | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

at NNSA | National Nuclear Security Administration at NNSA | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog The National Nuclear Security Administration Working at NNSA Home > Federal Employment > Working at NNSA Working at NNSA The work at NNSA will challenge you. You may take on significant responsibility quickly, and you will always be engaged in some of the most

273

NREL: Buildings Research - Working With Us  

NLE Websites -- All DOE Office Websites (Extended Search)

Working With Us Working With Us NREL's award-winning work with the commercial and public sectors to improve building energy performance is central to its mission. Learn about our awards. At NREL, industry, universities, and government agencies have many opportunities to take advantage of our residential and commercial buildings expertise. Here's how you can work with us to improve the energy efficiency of your buildings. Partner with Us You can work with our experts and use NREL's outstanding facilities and technical capabilities, which range from fundamental research to applications engineering, to capture proven energy savings in your buildings. Collaborations and Agreements NREL offers a variety of technology partnership agreements. These include collaborations through Cooperative Research and Development Agreements, as

274

Working at NNSA | National Nuclear Security Administration  

NLE Websites -- All DOE Office Websites (Extended Search)

at NNSA | National Nuclear Security Administration at NNSA | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog The National Nuclear Security Administration Working at NNSA Home > Federal Employment > Working at NNSA Working at NNSA The work at NNSA will challenge you. You may take on significant responsibility quickly, and you will always be engaged in some of the most

275

NREL: Photovoltaics Research - Working with Us  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with Us Working with Us At the National Renewable Energy Laboratory (NREL), our photovoltaic (PV) expertise can be leveraged by industry, university, and government agencies through a variety of opportunities. Find out more about working with us based on what you want to do. Partner with Us A wide angle photo from the ceiling of a laboratory. A man is adjusting something on a circular machine. You can work with our experts and take advantage of NREL's outstanding facilities and technical capabilities to make progress on your projects, which may range from fundamental research to applications engineering. Collaborations, Agreements, and Solicitations We offer a variety of non-proprietary and proprietary opportunities, for either industry partners or university partners. You can also work with us

276

NREL: Geothermal Technologies - Working with Us  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with Us Working with Us NREL offers industry, academia, and other government agencies opportunities to work with us and leverage our research expertise. Our technology partnership agreements help you gain access to our capabilities and facilities. There are several ways for your organization to get involved with us: Work collaboratively with NREL through Cooperative Research and Development Agreements- the most widely used means of industrial collaboration. Pay NREL to conduct research without your collaboration through Work for Others Research-an effective way for industry to use NREL's expertise. Commercialize NREL-developed energy technologies and products through our licensing agreements. Partner with NREL to use the lab's state-of-the-art research facilities.

277

TEC Working Group Background | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Background Background TEC Working Group Background Through the TEC/WG, DOE interacted with representatives of organizations at the state, tribal, and local levels to obtain input for program needs assessment, development and management, and to enhance their capability to carry out transportation emergency preparedness and safety activities specifically related to radioactive materials shipments. TEC membership included representatives from national, state, tribal and local government organizations, labor, industry and professional groups. Members meet semiannually to participate in plenary sessions, breakout work sessions, and in more specialized Topic Groups. To learn more about the history and background of TEC, please see the following documents: TEC Charter TEC Work Plan

278

Working with NREL | Open Energy Information  

Open Energy Info (EERE)

Working with NREL Working with NREL Jump to: navigation, search Each year, NREL initiates or renews relationships with dozens of external partners, including research institutions, industry experts, large corporations, start-ups, and a variety of other organizations. The partnerships take on many forms, ranging from research and development to licensing agreements. Check out the map below to see if NREL is working with any industry partners near you. Loading map... {"format":"googlemaps3","type":"SATELLITE","types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"limit":500,"offset":0,"link":"all","sort":[""],"order":[],"headers":"show","mainlabel":"","intro":"","outro":"","searchlabel":"\u2026

279

Sandia National Laboratories: Working with Sandia: Procurement:  

NLE Websites -- All DOE Office Websites (Extended Search)

Construction and Facilities Construction and Facilities Opportunities Potential Suppliers Current Suppliers Accounts Payable Contract Audit Contractor/Bidder Information Construction and Facilities Staff Augmentation What Does Sandia Buy? Enterprise IT Services Working with Sandia Construction and Facilities Sandia establishes contracts to support design and construction, including contracts for leased space, decontamination and demolition work, and infrastructure maintenance. AE & Construction Partnerships Design Management Partnerships Error/Omission Process (PDF) Sandia completes construction work through Construction Partnerships and the Construction Registration Database. Construction Partnerships are used for general construction, electrical services, and mechanical services. The

280

NREL: Advanced Power Electronics - Working with Us  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with Us Working with Us Interaction with industrial, university, and government partners is key to moving advanced vehicle and fuels technologies into the marketplace and the U.S. economy. There are a variety of ways to get involved with NREL's advanced vehicle and fuels research activities: Work collaboratively with NREL through a variety of Technology Partnership Agreements. We can assist you in selecting which agreement is most appropriate for your research project. Gain access to the Center for Transportation Technologies and Systems expertise and specialized research facilities through an Analytical Services Agreement (ASA). In addition, NREL's patented transportation technologies are available for commercialization and NREL's vehicles and fuels research facilities are

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

September 8, 2011, HSS/Union Focus Group Work Group Telecom - Work Group Charter  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of Health, Safety and Security Focus Group [Name of Work Group] Work Group Charter (Date) I. PURPOSE The HSS Focus Group [Name of Work Group] is one of several HSS Work Groups, established to address worker health, safety and security programs improvements across the U.S. Department of Energy Complex. The [Name of Work Group] has been established to (state specific purpose). II. OBJECTIVES (State the desired impact(s) and major outcome(s) for, the Work Group) 1. Establish specific improvement goals, intended outputs and supporting activities that respond to identified worker health and safety improvement needs. 2. Establish measurable indicators when possible to support findings, recommendations and accomplishments.

282

How it Works | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

How it Works How it Works How it Works How Does Hydroelectricity Work? Types of Hydropower Facilities Impoundment Hydropower: Uses a dam to store water. Water may be released either to meet changing electricity needs or to maintain a constant reservoir level. Diversion Hydropower: Channels a portion of the river through a canal or a penstock but may require a dam. Pumped Storage: Pumps water from a lower reservoir to an upper reservoir at times when demand for electricity is low. During periods of high electrical demand, the water is released back to the lower reservoir to generate electricity. The Hydrologic Cycle Water constantly moves through a vast global cycle, in which it evaporates from lakes and oceans, forms clouds, precipitates as rain or snow, then flows back to the sea. The energy of this water cycle, which is driven by

283

Working with Our Communities | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Working with Our Communities Working with Our Communities Working with Our Communities Working with Our Communities Asset Revitalization promotes a more efficient business environment through integration of DOE missions with community interests. ARI encourages collaborative efforts of public, private, and community sector resources. Through ARI, DOE supports efforts to economically diversify the economies of those communities most impacted by DOE site activities, including DOE mission consolidation and/or cleanup and closure of excess sites and facilities no longer needed to support the DOE mission. ARI promotes a more efficient business environment that integrates DOE missions with community interests and encourages collaboration between public and private resources. DOE employees, Energy Community Alliance, and Community Reuse Organization

284

Working at EERE | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Working at EERE Working at EERE Working at EERE As a model employer and diversity/inclusion leader, we treat people as our greatest asset at the Office of Energy Efficiency and Renewable Energy (EERE). Our goal is to be an employer of choice and a diversity leader, and we measure our success by the engagement of our employees, the satisfaction of our customers and our relationships with the communities in which we work. In EERE, we constantly strive for a workplace that is inclusive and values each individual, as well as his or her experience, perspective and contribution to our success. The high value we place on diversity is critical to our mission because we must attract and retain the best talent, and create an engaged workforce to accomplish our worldwide national

285

ACME solar works | Open Energy Information  

Open Energy Info (EERE)

ACME solar works ACME solar works Jump to: navigation, search Logo: ACME solar works Name ACME solar works Address 20738 Brown Lane Place Summerdale, Alabama Zip 36580 Sector Solar Product Solar power systems, products Phone number 877-226-3004 Website http://www.acmesolarworks.net/ Coordinates 30.5165433°, -87.6490183° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":30.5165433,"lon":-87.6490183,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

286

Peak Underground Working Natural Gas Storage Capacity  

Gasoline and Diesel Fuel Update (EIA)

Definitions Definitions Definitions Since 2006, EIA has reported two measures of aggregate capacity, one based on demonstrated peak working gas storage, the other on working gas design capacity. Demonstrated Peak Working Gas Capacity: This measure sums the highest storage inventory level of working gas observed in each facility over the 5-year range from May 2005 to April 2010, as reported by the operator on the Form EIA-191M, "Monthly Underground Gas Storage Report." This data-driven estimate reflects actual operator experience. However, the timing for peaks for different fields need not coincide. Also, actual available maximum capacity for any storage facility may exceed its reported maximum storage level over the last 5 years, and is virtually certain to do so in the case of newly commissioned or expanded facilities. Therefore, this measure provides a conservative indicator of capacity that may understate the amount that can actually be stored.

287

How it Works | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

How it Works How it Works How it Works How Does Hydroelectricity Work? Types of Hydropower Facilities Impoundment Hydropower: Uses a dam to store water. Water may be released either to meet changing electricity needs or to maintain a constant reservoir level. Diversion Hydropower: Channels a portion of the river through a canal or a penstock but may require a dam. Pumped Storage: Pumps water from a lower reservoir to an upper reservoir at times when demand for electricity is low. During periods of high electrical demand, the water is released back to the lower reservoir to generate electricity. The Hydrologic Cycle Water constantly moves through a vast global cycle, in which it evaporates from lakes and oceans, forms clouds, precipitates as rain or snow, then flows back to the sea. The energy of this water cycle, which is driven by

288

THE EARLY ANTIPROTON WORK [Nobel Lecture  

SciTech Connect

Early work on the antiproton, particularly that part which led to the first paper on the subject, is described. Conclusions that can be drawn purely from the existence of the antiproton are discussed. (W.D.M.)

Chamberlain, O.

1959-12-15T23:59:59.000Z

289

The Neural Substrate of Orientation Working Memory  

Science Conference Proceedings (OSTI)

We have used positron emission tomography (PET) to identify the neural substrate of two major cognitive components of working memory (WM), maintenance and manipulation of a single elementary visual attribute, i.e., the orientation of a grating presented ...

L. Cornette; P. Dupont; E. Salmon; Guy A. Orban

2001-08-01T23:59:59.000Z

290

Copan Public Works Authority | Open Energy Information  

Open Energy Info (EERE)

Copan Public Works Authority Copan Public Works Authority Jump to: navigation, search Name Copan Public Works Authority Place Oklahoma Utility Id 4319 Utility Location Yes Ownership M NERC Location SPP NERC SPP Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png General Service Average Rates Residential: $0.0900/kWh Commercial: $0.0859/kWh References ↑ "EIA Form EIA-861 Final Data File for 2010 - File1_a" Retrieved from "http://en.openei.org/w/index.php?title=Copan_Public_Works_Authority&oldid=410530" Categories: EIA Utility Companies and Aliases

291

SpringWorks | Open Energy Information  

Open Energy Info (EERE)

SpringWorks SpringWorks Jump to: navigation, search Name SpringWorks Place Minnetonka, Minnesota Zip 55343-8684 Product SpringWorks was created to discover and nurture incubation companies and emerging technologies for Petters Group Worldwide. Coordinates 44.939448°, -93.467869° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":44.939448,"lon":-93.467869,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

292

Walters Public Works Authority | Open Energy Information  

Open Energy Info (EERE)

Walters Public Works Authority Walters Public Works Authority Jump to: navigation, search Name Walters Public Works Authority Place Oklahoma Utility Id 20061 Utility Location Yes Ownership M NERC Location SPP NERC SPP Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Commercial Rate- Single Phase Commercial Commercial Rate- Three Phase Commercial Residential Rate Residential Average Rates Residential: $0.0944/kWh Commercial: $0.0927/kWh References ↑ "EIA Form EIA-861 Final Data File for 2010 - File1_a" Retrieved from "http://en.openei.org/w/index.php?title=Walters_Public_Works_Authority&oldid=41213

293

July 2012, Training Work Group Status Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Work Group Status Overview Training Work Group Status Overview Accomplishments: 1. May 7 - 8. Attended NIEHS Trainer's Exchange in Oak Ridge . 2. May 8 - 9. Joined HAMMER in visiting Oak Ridge entities to build support for the Radworker Pilot. 3. June 19-20. Joined Char Wells at Sandia (with NIEHS and HAMMER) for the Learning/Training Workshop. 2. NTC offered support for Data Warehousing at the Learning/Training Workshop. 3. Obtained EFCOG commitment to create a Human Capital Training Subgroup under the Business Management Working Group. 4. June 20 - 21. Hosted HAMMER to develop Radworker Reciprocity Program Checklist. 5. July 10-11. HSS Focus Group Training Working Group and Subcommittee meetings at NTC. Upcoming Meetings: Boardman meeting with HAMMER week of July 29.

294

NREL: Wind Research - Working with Us  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with Us Working with Us NREL works with industry in a public-private contracting environment to research, design, and build advanced wind energy technologies. We have an outstanding performance record for working with the wind industry to advance wind turbine science and lower the cost of wind-generated electricity. Companies partner with NREL when they have particular design challenges, when they wish to cost-share development of state-of-the-art wind turbines, and when they want to document their turbine's performance for certification. See projects and NREL's Wind R&D Success Stories for examples of current and past industry partnerships. Flexibility is the key to government-industry collaborations at the National Wind Technology Center (NWTC), where companies get the support

295

NREL: Research Facilities - Working with Us  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with Us Working with Us For developing commercially viable energy products, organizations may partner with NREL to use our state-of-the-art laboratories, testing and user facilities. We typically develop technology partnership agreements for using our facilities and/or working with our researchers. Learn more about technology partnership agreements on the NREL Technology Transfer Web site. Printable Version Research Facilities Home Laboratories Test & User Facilities Laboratories & Facilities by Technology Working with Us Did you find what you needed? Yes 1 No 0 Thank you for your feedback. Would you like to take a moment to tell us how we can improve this page? Submit We value your feedback. Thanks! We've received your feedback. Something went wrong. Please try again later.

296

Working At DOE | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

At DOE At DOE Working At DOE Working At DOE Only Here...Will you Define the Future of Energy The people of DOE are engaged in a wide range of challenging and innovative work - from participating in groundbreaking international initiatives like the Global Nuclear Partnership, to solar power demonstration projects, to projects that convert captured carbon dioxide (CO2) emissions from industrial sources into fuel, plastics, and fertilizers. Only here can the diversity of activities throughout our organization make for an exciting and dynamic work environment. And the diversity carries over to the makeup of the DOE workforce, with men and women from a variety of backgrounds and a wide range of expertise. We offer unsurpassed geographical variety - from our headquarters in

297

Implementation Workshop: High Performance Work Organizations  

E-Print Network (OSTI)

Since the rise of the industrial revolution, there are few challenges that compare in scale and scope with the challenge of implementing lean principles in order to achieve high performance work systems. This report summarize ...

Klein, Jan

298

From Higher Education To Work In West  

E-Print Network (OSTI)

1. Work Participation And Average Annualized Wages Of Graduates From West Virginia Public Higher .................................................................................................1 Results By Year And Residency ........................................................................................22 Appendix I: Detailed Description Of Employment Data .........................................29

Mohaghegh, Shahab

299

From Higher Education To Work In West  

E-Print Network (OSTI)

1. Work Participation And Average Annualized Wages In 2010 Of Graduates From West Virginia Public .................................................................................................1 Results By Year, Experience, Residency, And Degree............................................5.....................................................34 Appendix I: Detailed Description Of Employment Data .........................................35

Mohaghegh, Shahab

300

Bring Your Green to Work | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

interactive activities-to encourage your team to save energy in the workplace. Bring Your Green to Work is a national ENERGY STAR campaign encouraging all of us to help improve the...

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

How did the Rocket steam engine work?  

E-Print Network (OSTI)

Simon Schaffer talks to a museum curator at the York railway museum about the way in which steam engines worked and the imagination and technical ability of George Stephenson....

Dugan, David

2004-08-17T23:59:59.000Z

302

Kansas City- EnergyWorks KC  

Energy.gov (U.S. Department of Energy (DOE))

The Energy Works KC program offers rebates to commercial, residential, and non-profit Kansas City organizations and residents who improve energy efficiency in their homes or buildings. Residential...

303

Water+works : a new ecological infrastructure  

E-Print Network (OSTI)

With the global water crisis as catalyst, Water+Works acts as a model for a localized water initiative that will mitigate flooding and provide a freshwater resource in times of crisis, while enriching urban ecosystems and ...

Hedstrom, Lisa Kristin

2011-01-01T23:59:59.000Z

304

LotusWorks | Open Energy Information  

Open Energy Info (EERE)

management service provider. References LotusWorks1 LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now This article is a stub. You can help OpenEI...

305

W Boson Mass Working Group Report  

SciTech Connect

The W boson mass working group discussed the current status of the W boson mass measurement and the prospects for improving on LEP and Tevatron measurements at the LHC.

Kilgore, W.; Kilgore, W.

2010-06-14T23:59:59.000Z

306

Representing aggregate works in the digital library  

Science Conference Proceedings (OSTI)

This paper studies the challenge of representing aggregate works such as encyclopedias, collected poems and journals in heterogenous digital library collections. Reflecting on the materials used by humanities academics, we demonstrate the varied range ... Keywords: aggregate documents, architecture, digital libraries

George Buchanan; Jeremy Gow; Ann Blandford; Jon Rimmer; Claire Warwick

2007-06-01T23:59:59.000Z

307

DOE Guide to Working with Tribal Nations  

Energy.gov (U.S. Department of Energy (DOE))

U.S. Department of Energy (DOE) employees and contractors frequently work with Indian tribes or nations as part of their jobs. The purpose of this guide is to help DOE employees and contractors...

308

2012 Fuel Cycle MPACT Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

presentations 12:00-12:30 Working Lunch 12:30-5:00 Meeting Presentations Thursday, March 15 8:00 Arrival at SRS Badge Office Badging 9:00 - 12:00 Optional tour (H-Canyon and MOX)...

309

Goltry Public Works Authority | Open Energy Information  

Open Energy Info (EERE)

Goltry Public Works Authority Goltry Public Works Authority Jump to: navigation, search Name Goltry Public Works Authority Place Oklahoma Utility Id 7441 Utility Location Yes Ownership M NERC Location SPP NERC SPP Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Commercial Commercial Large Commercial Industrial Residential Residential Average Rates Residential: $0.1070/kWh Commercial: $0.1420/kWh References ↑ "EIA Form EIA-861 Final Data File for 2010 - File1_a" Retrieved from "http://en.openei.org/w/index.php?title=Goltry_Public_Works_Authority&oldid=410749

310

Working with ORNL | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

News Careers Work with ORNL Careers Partnerships Procurement Small Business About ORNL Visiting ORNL Events and Conferences Highlights Success Stories Contact Us Index Home | ORNL | Work with ORNL SHARE Work with ORNL There are a few different way of "working" with ORNL. If you're interested in a job with the laboratory, you'll want to visit our Careers site. If you need information about ORNL technologies, partnerships, or collaborations, you should contact our Partnerships group. Small businesses should get in touch with ORNL's Small Business Program Office. If you're a supplier or vendor, the Procurement site is probably what you're looking for. If the links above don't provide the information you're looking for, let us know and we'll point you in the right direction.

311

Work with EETD scientists on cooperative research?  

NLE Websites -- All DOE Office Websites (Extended Search)

Work with EETD scientists on cooperative research? EETD invites R&D collaboration with scientists who have a mutual interest in the research areas we cover, from industry and the...

312

Working Fluids Low Global Warming Potential Refrigerants  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Working Fluids Low GWP Working Fluids Low GWP Refrigerants - CRADA Ed Vineyard Oak Ridge National Laboratory vineyardea@ornl.gov (865) 574-0576 3 April 2013 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Problem Statement: - High GWP refrigerants increase CO 2 equivalent emissions for HVAC&R equipment - Low GWP alternatives may increase energy consumption, introduce safety risks, require significant modifications to equipment, and have higher costs

313

Working Fluids Low Global Warming Potential Refrigerants  

NLE Websites -- All DOE Office Websites (Extended Search)

Working Fluids Low GWP Working Fluids Low GWP Refrigerants - CRADA Ed Vineyard Oak Ridge National Laboratory vineyardea@ornl.gov (865) 574-0576 3 April 2013 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Problem Statement: - High GWP refrigerants increase CO 2 equivalent emissions for HVAC&R equipment - Low GWP alternatives may increase energy consumption, introduce safety risks, require significant modifications to equipment, and have higher costs

314

EPRI Live Working Reference Book Edition 2  

Science Conference Proceedings (OSTI)

This report contains updated information on the 2012 edition of the National Electrical Safety Code (NESC) and on glass insulators that became available after publication of the first edition of the Tan Book (Electric Power Research Institute [EPRI] report 1018974) in 2009. The 2009 first edition of the this report was a fully revised, updated, and expanded version of the Live Working Guide for Overhead Lines (EPRI report 1008747), published in 2004. The new EPRI Live Working Reference Book provides the ...

2011-11-02T23:59:59.000Z

315

Stirling engine with air working fluid  

DOE Patents (OSTI)

A Stirling engine capable of utilizing air as a working fluid which includes a compact heat exchange module which includes heating tube units, regenerator and cooler positioned about the combustion chamber. This arrangement has the purpose and effect of allowing the construction of an efficient, high-speed, high power-density engine without the use of difficult to seal light gases as working fluids.

Corey, John A. (North Troy, NY)

1985-01-01T23:59:59.000Z

316

The Working Poor and Welfare Recipiency by  

E-Print Network (OSTI)

Many people do not seem to take advantage of the welfare system. Of the working poor who qualify for welfare, two thirds of those eligible for food stamps and one-third of those eligible for AFDC do not receive these benefits. Those who qualified for assistance were in their prime working years--between 25 and 45. Thus they were not "marginal" workers who were too young or old to be attached to the labor force. Those who qualified for assistance worked many hours: Most of those who qualified for food stamps worked full time. Most of those who qualified for AFDC worked at least half-time. Most of those who qualified for AFDC or food stamps had high school degrees or greater. Many of those who qualified for AFDC or food stamps were in married couple families: For food stamps, almost half of those who qualified were in married couple families; one third of those who qualified for AFDC were in married couple families. Thus the portrait of the eligible working poor was not one of marginal workers, either disproportionately younger or older workers, or workers who are otherwise out of the ordinary. Most were in their prime working years, most worked many hours, most had decent educations, and many were married. Most of those who qualified for food stamps or AFDC simply earned too little or were in unstable jobs: Most were in service and clerical occupations, and in retail and professional industries (the latter dominated by health and residential care). These jobs are the lowest paying occupations and industries. Few of those eligible for AFDC or food stamps belonged to unions (7 % were represented by labor unions), further depressing their wages and adding job instability. 2

Marlene Kim; Thanos Mergoupis; Marlene Kim; Thanos Mergoupis

1995-01-01T23:59:59.000Z

317

MN471018, Work Planning and Control Manual  

NLE Websites -- All DOE Office Websites (Extended Search)

18, Work Planning and Control Manual 18, Work Planning and Control Manual Sponsor: Michael W. Hazen, 4000 Issue Date: January 3, 2007 Revision Date: June 1, 2009 This document is no longer a CPR. This document implements the requirements of Corporate procedure ESH100.1.WPC.1, Plan and Control Work. IMPORTANT NOTICE: A printed copy of this document may not be the document currently in effect. The official version is the online version located on the Sandia Restricted Network (SRN) MN471018 - WORK PLANNING AND CONTROL MANUAL Subject Matter Expert: Brad Elkin; CA Counterpart: Aden Jackson MN471018 Revision Date: June 1, 2009; Replaces Document: October 28, 2008 Implementation Notice: The requirements outlined in this document must be incorporated into approved comprehensive organizational procedures on or before June 30, 2009. New work planned and conducted after June 30, 2009 shall be performed in accordance with this document. Ongoing work, conducted under an existing, current, and approved PHS and TWD (if required), is authorized until the expiration of the applicable PHS, TWD, or June 30, 2010.

318

November 13 - 15, 2012 HSS Work Group Leadership Meeting Summary - Work Force Retention  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Work Force Retention Work Group Work Force Retention Work Group Co-Lead Telecom November 16, 2012 DRAFT Discussion Overview Purpose: This HSS Focus Group Work Group telecom was held with the Work Group Co-Leads to discuss change elements and strategic direction to support accelerated efforts to advancing progress, productivity and performance within each of the Work Groups. Although current roles within all of the Work Groups and Focus Group efforts remain the same, the addition of centralized leadership and oversight by representatives (2) of the Departmental Representative to the Defense Nuclear Facilities Safety Board are established. 1. Leadership Transition * Co-Leads will continue to provide technical functions * Functions of the Focus Group Program will remain the same. [Lily/Stephanie]

319

DOE O 481.1C, WORK FOR OTHERS (NON-DEPARTMENT OF ENERGY FUNDED WORK)  

Energy.gov (U.S. Department of Energy (DOE))

Work-for-Others (WFO) Agreements permit DOE laboratories and facilities to conduct work for other federal agencies and non-federal entities (including state and local governments, universities) on...

320

MARKETING WORKS: Marketing Works is an opportunity for companies and organizations to commission a marketing  

E-Print Network (OSTI)

MARKETING WORKS: Marketing Works is an opportunity for companies and organizations to commission a marketing project, undertaken by postgraduate students from Strathclyde Business School's MSc programmes in the marketing department. In 2010/11 we undertook 22 Marketing Works projects, to include a wide range

Martin, Ralph R.

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Generation of energy by means of a working fluid, and regeneration of a working fluid  

SciTech Connect

A method is provided of optimizing, within limits imposed by a heating medium from the surface of an ocean and a cooling medium from an ocean depth, the energy supply capability of a gaseous working fluid which is expanded from a charged high pressure level to a spent low pressure level to provide available energy, the method comprising expanding the gaseous working fluid to a spent low pressure level where the condensation temperature of the working fluid is below the minimum temperature of the cold water, and regenerating the spent working fluid by, in at least one regeneration stage, absorbing the working fluid being regenerated in an absorption stage by dissolving it in a solvent solution while cooling with the cold water, the solvent solution comprising a solvent having an initial working fluid concentration which is sufficient to provide a solution having a boiling point, after dissolving the working fluid being regenerated, which is above the minimum temperature of the cold water to permit effective absorption of the working fluid being regenerated, increasing the pressure and then evaporating the working fluid being regenerated by heating in an evaporation stage with the available hot water, feeding the evaporated working fluid and the solvent solution to a separator stage for separating the evaporated working fluid and the solvent solution, recovering the evaporated, separated working fluid, and recycling the balance of the solvent solution from the separator stage to constitute the solvent solution for the absorption stage; and an apparatus for carrying out the method.

Kalina, A.I.

1982-08-31T23:59:59.000Z

322

RefWorks for Business: Basics Ways to Get References into RefWorks  

E-Print Network (OSTI)

time. Type in your search terms. 5. Import from a text file. This method works for some onlineWorks function is located along side the print, e-mail, save and download functions. 2. Manually enter references. Search and import from an online catalogue within RefWorks. You can search and import references from

Haykin, Simon

323

Military Munitions Waste Working Group report  

SciTech Connect

This report presents the findings of the Military Munitions Waste Working Group in its effort to achieve the goals directed under the Federal Advisory Committee to Develop On-Site Innovative Technologies (DOIT Committee) for environmental restoration and waste management. The Military Munitions Waste Working Group identified the following seven areas of concern associated with the ordnance (energetics) waste stream: unexploded ordnance; stockpiled; disposed -- at known locations, i.e., disposal pits; discharged -- impact areas, unknown disposal sites; contaminated media; chemical sureties/weapons; biological weapons; munitions production; depleted uranium; and rocket motor and fuel disposal (open burn/open detonation). Because of time constraints, the Military Munitions Waste Working Group has focused on unexploded ordnance and contaminated media with the understanding that remaining waste streams will be considered as time permits. Contents of this report are as follows: executive summary; introduction; Military Munitions Waste Working Group charter; description of priority waste stream problems; shortcomings of existing approaches, processes and technologies; innovative approaches, processes and technologies, work force planning, training, and education issues relative to technology development and cleanup; criteria used to identify and screen potential demonstration projects; list of potential candidate demonstration projects for the DOIT committee decision/recommendation and appendices.

Not Available

1993-11-30T23:59:59.000Z

324

Transuranic Waste Transportation Working Group Agenda  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

States Energy Board States Energy Board Joint Meeting of the Radioactive Materials Transportation Committee and the Transuranic Waste Transportation Working Group The Hilton Knoxville Knoxville, Tennessee May 15, 2012 Tuesday, May 15, 2012 8:30 a.m. Breakfast 9:30 a.m. Welcome / Opening Remarks / Introductions - Christopher Wells, Southern States Energy Board - Sandra Threatt, Chair, SSEB Radioactive Materials Transportation Working Group - Elgan Usrey, Chair, SSEB Transuranic Waste Transportation Working Group 9:45 a.m. WIPP Transportation Program and National TRU Activities - Bill Mackie, Carlsbad Field Office 10:30 a.m. Break 10:45 a.m. Commercial Vehicle Safety Alliance Level VI Program Update - Larry Stern, Commercial Vehicle Safety Alliance

325

Interagency Sustainability Working Group | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program Areas » Sustainable Buildings & Campuses » Interagency Program Areas » Sustainable Buildings & Campuses » Interagency Sustainability Working Group Interagency Sustainability Working Group October 4, 2013 - 5:00pm Addthis The Interagency Sustainability Working Group (ISWG) is the coordinating body for sustainable buildings in the Federal Government. The ISWG: Serves as a forum for information exchange and promotes agency implementation of goals for high-performance and sustainable buildings Develops policy and reporting guidance that fosters the widespread adoption of sustainable design and operations in the Federal sector Develops technical guidance and tools to support implementation of agency sustainability policies for Federally owned, operated, and leased buildings. The ISWG is also charged with providing assistance for implementing the

326

Solar Industry At Work | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Industry At Work Industry At Work Solar Industry At Work Addthis 1 of 11 Vice President Joe Biden talks with staff at the National Renewable Energy Lab's Process Development and Integration Laboratory (PDIL). The PDIL brings together technical experts from NREL, the solar industry, and universities for collaborative research. Image: Dennis Schroeder (NREL) 2 of 11 Steven Bohn, an engineer at SunEdison oversees SunEdison's testing facility at SolarTAC in Aurora, CO. The SolarTAC mission is to increase the efficiency of solar energy products and rapidly deploy them to the commercial market. Image: Dennis Schroeder (NREL) 3 of 11 NREL scientists Ki Ye and Joe Berry peer into the glass siding of a deposition instrument to view the latest results of an experiment with a new material.

327

Brad Foote Gear Works | Open Energy Information  

Open Energy Info (EERE)

Brad Foote Gear Works Brad Foote Gear Works Jump to: navigation, search Name Brad Foote Gear Works Place Cicero, Illinois Zip 60804-1404 Sector Wind energy Product Gearing systems manufacturer making systems for wind energy, power generation, and oil field equipment in addition to other industries. Coordinates 43.177106°, -76.082399° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.177106,"lon":-76.082399,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

328

Why.Spring. working.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

nuclear inspectors nuclear inspectors train by playing video games | pg. 10 April 2011 In this Issue Plans to reduce LANL's environmental impact | pg. 16 LANL is operated by Los Alamos National Security, LLC for the U.S. Department of Energy's National Nuclear Security Administration About this issue Why would a graphic artist choose to work at Los Alamos National Laboratory over DreamWorks or Pixar? Why would a team of scientists and engineers play games to make the world a safer place? We'll introduce you to an unlikely team working (and playing) together to blend the real world with the virtual one. Step into the best of both on page 10. In your own corner of the world, you may notice fewer copies of Why magazine in your workplace-starting with this issue, you will only be mailed a printed paper copy if you

329

Working and Net Available Shell Storage Capacity  

U.S. Energy Information Administration (EIA) Indexed Site

Working and Net Available Shell Storage Capacity Working and Net Available Shell Storage Capacity With Data for September 2013 | Release Date: November 27, 2013 | Next Release Date: May 29, 2013 Previous Issues Year: September 2013 March 2013 September 2012 March 2012 September 2011 March 2011 September 2010 Go Containing storage capacity data for crude oil, petroleum products, and selected biofuels. The report includes tables detailing working and net available shell storage capacity by type of facility, product, and Petroleum Administration for Defense District (PAD District). Net available shell storage capacity is broken down further to show the percent for exclusive use by facility operators and the percent leased to others. Crude oil storage capacity data are also provided for Cushing, Oklahoma, an

330

NREL: News Feature - Weatherization Work Guidelines Launched  

NLE Websites -- All DOE Office Websites (Extended Search)

Weatherization Work Guidelines Launched Weatherization Work Guidelines Launched September 30, 2013 Photo of a man in a suit blowing insulation into an attic. Enlarge image William Stewart with Veterans Green Jobs blows cellulose insulation in the attic of a home A recent collaboration between the Energy Department, NREL, and the home energy performance industry is supporting the weatherization workforce with consistent on-the-job tools and accreditations that lead to better-defined career paths. Credit: Dennis Schroeder Getting up and going to work is hard enough every day. But add to your burden the need to remember every step of your job down to the smallest detail - and the fact that if you want to change careers, your lack of credentials might mean starting from scratch. These are the challenges

331

Underground Natural Gas Working Storage Capacity - Methodology  

Gasoline and Diesel Fuel Update (EIA)

Summary Prices Exploration & Reserves Production Imports/Exports Pipelines Storage Consumption All Natural Gas Data Reports Analysis & Projections Most Requested Consumption Exploration & Reserves Imports/Exports & Pipelines Prices Production Projections Storage All Reports ‹ See All Natural Gas Reports Underground Natural Gas Working Storage Capacity With Data for November 2012 | Release Date: July 24, 2013 | Next Release Date: Spring 2014 Previous Issues Year: 2013 2012 2011 2010 2009 2008 2007 2006 Go Methodology Demonstrated Peak Working Gas Capacity Estimates: Estimates are based on aggregation of the noncoincident peak levels of working gas inventories at individual storage fields as reported monthly over a 60-month period ending in November 2012 on Form EIA-191, "Monthly Natural Gas Underground Storage

332

About the RHIC II Working Groups  

NLE Websites -- All DOE Office Websites (Extended Search)

About the Working Groups About the Working Groups The BNL Physics Department is organizing a series of meetings among theorists and experimenters from throughout the interested scientific community to focus on the central questions that will drive the next phase of RHIC physics. The November 2004 workshop was a kick-off meeting, to collect ideas and topics for future workshops, and assemble community-wide working groups. At the November workshop we had an extensive discussion of how the RHIC community should best organize itself to refine the science agenda for the next phase of RHIC research, to fully understand the science drivers for the RHIC II upgrades, and make a compelling scientific case for these upgrades to the broader nuclear physics community and to the young generation of RHIC scientists.

333

Fuel Cell Technologies Office: Catalysis Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Catalysis Working Group Catalysis Working Group The Catalysis Working Group (CWG) meets twice per year to exchange information, create synergies, and collaboratively develop both an understanding of and tools for studying electrocatalysis for polymer electrolyte fuel cells (PEFCs) and other low- and intermediate-temperature fuel cell systems, including direct methanol fuel cells (DMFCs), alkaline fuel cells (AFCs), alkaline membrane fuel cells (AMFCs), and phosphoric acid fuel cells (PAFCs). The CWG members include principal and co-principal investigators in electrocatalysis projects funded by the U.S. Department of Energy (DOE), as well as supporting DOE personnel. More information on DOE electrocatalysis activities can be found in the Multi-Year Research, Development, and Demonstration Plan.

334

ClimateWorks Feed | Open Energy Information  

Open Energy Info (EERE)

ClimateWorks Feed ClimateWorks Feed Jump to: navigation, search Home | About | Inventory | Partnerships | Capacity Building | Webinars | Reports | Events | News | List Serve CLEAN Member Feeds Center for Environment and National Security at Scripps Centro de Energías Renovables (CER) The Children's Investment Fund Foundation (CIFF) Climate and Development Knowledge Network (CDKN) Climate Technology Initiative (CTI) ClimateWorks Foundation Coalition for Rainforest Nations (CfRN) Ecofys Energy Research Centre of the Netherlands (ECN) Energy Sector Management Assistance Program of the World Bank (ESMAP) Environment and Development Action in the Third World (ENDA-TM) German Aerospace Center (DLR) German Agency for International Cooperation (GIZ) Global Village Energy Partnership (GVEP)

335

Earth Day event showcases LANL energy work  

NLE Websites -- All DOE Office Websites (Extended Search)

Earth Day showcases energy work Earth Day showcases energy work Earth Day event showcases LANL energy work The public is invited to learn about projects in energy conservation, generation, research, and management at an Energy Town Hall April 21. April 19, 2010 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Contact

336

Example Retro-Commissioning Statement of Work  

NLE Websites -- All DOE Office Websites (Extended Search)

11.3 11.3 Example Retro-Cx Scope of Work Example Retro-Commissioning Scope of Work To Include Services As Part of Super ESPC Detailed Energy Survey Background Agency requests that ESCo perform retro-commissioning services 1 , as detailed herein, as a part of performing the Detailed Energy Survey (DES) for site. The incremental cost for these services will be covered as a part of the project development cost for the Super ESPC project, whether or not viable measures are identified and ultimately implemented. It is the intent of the Agency to expand the work that will be performed during the DES. Leveraging the DES to complete a thorough scoping of retro-commissioning opportunities will substantially enhance the value of the ESCO services by ensuring that

337

NREL: Energy Systems Integration - Working with Us  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with Us Working with Us NREL offers industry, universities, and other government agencies opportunities to leverage NREL's research expertise. Working with outside organizations is the key to moving clean energy technologies into the market. We provide opportunities to develop technology partnerships, license our technologies, and use our facilities. Learn about the ESIF's current partners. Partner with NREL The Energy Systems Integration Facility (ESIF) is the latest addition to the Energy Department's national network of user facilities that provide nearly 30,000 scientists and engineers each year with open access to some of the world's best instruments and tools, including x-ray sources, accelerators and supercomputers. Corporate users pay the full cost of conducting research and retain their intellectual property and data rights,

338

NREL: Energy Storage - Working with Us  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with Us Working with Us Partnering with industry, government, and universities is key to developing affordable energy storage technology and moving it into the marketplace and the U.S. economy. In collaboration with our diverse partners, we use thermal management and modeling and analysis from a vehicle systems perspective to improve energy storage devices. Much of our research is conducted at the state-of-the-art energy storage laboratory, in Golden, Colorado. There are a variety of ways to become involved with NREL's Energy Storage activities: NREL's Partnering Agreements Work collaboratively with NREL through a variety of Technology Partnership Agreements. We can help you select the most appropriate agreement for your research project. Gain access to NREL's expertise and specialized research facilities through

339

WIPP AT WORK | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

AT WORK AT WORK WIPP AT WORK February 1, 2010 - 12:00pm Addthis Carlsbad, NM - Transuranic (TRU) waste cleanup efforts are underway across the DOE complex, as the Waste Isolation Pilot Plant (WIPP) wraps up its 11th year of disposal operations. The Carlsbad Field Office (CBFO) manages the DOE's National TRU Program (NTP) Office and WIPP facility operations. TRU waste temporarily stored at DOE generator sites around the country is shipped to WIPP and disposed in rooms mined out of an ancient salt formation 2,150 feet below the surface. WIPP, which began waste disposal operations in 1999, is located 26 miles outside of Carlsbad, New Mexico. Over the last year, CBFO has successfully completed two major remote-handled (RH) TRU waste shipping campaigns and continues efforts to

340

Prague Public Works Authority | Open Energy Information  

Open Energy Info (EERE)

Prague Public Works Authority Prague Public Works Authority Place Oklahoma Utility Id 15311 Utility Location Yes Ownership M NERC Location SPP NERC SPP Yes Activity Distribution Yes Activity Bundled Services Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Commercial Rate Commercial Commercial Time of Use Rate Commercial Industrial Rate Industrial Residential Rate Residential Average Rates Residential: $0.0879/kWh Commercial: $0.0917/kWh Industrial: $0.0711/kWh References ↑ "EIA Form EIA-861 Final Data File for 2010 - File1_a" Retrieved from "http://en.openei.org/w/index.php?title=Prague_Public_Works_Authority&oldid=411392

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Students gain work experience at WIPP  

NLE Websites -- All DOE Office Websites (Extended Search)

Students Gain Work Experience at WIPP Students Gain Work Experience at WIPP CARLSBAD, N.M., January 10, 2000 -- Students from two Eddy County high schools are gaining valuable experience by spending time with employees of the Westinghouse Waste Isolation Division and Day & Zimmermann, LLC at the Waste Isolation Pilot Plant (WIPP). Six students from Carlsbad High School and four students from Loving High School are participating in the 1999-2000 WIPP Shadow Program. A "shadow" is a student who teams up with an employee to gain hands-on experience in the workplace. This activity helps the students identify career options and develop confidence. Each student spends three days during the school year with a volunteer mentor at the work location. "This program offers our employees the opportunity to share their knowledge and

342

Working and Net Available Shell Storage Capacity  

U.S. Energy Information Administration (EIA) Indexed Site

Working and Net Available Shell Working and Net Available Shell Storage Capacity November 2013 With Data as of September 30, 2013 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 U.S. Energy Information Administration | Working and Net Available Shell Storage Capacity as of September 30, 2013 This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA's data, analyses, and forecasts are independent of approval by any other officer or employee of the United States Government. The views in this report therefore should not be construed as representing those of the Department of Energy or

343

Tahlequah Public Works Auth | Open Energy Information  

Open Energy Info (EERE)

Tahlequah Public Works Auth Tahlequah Public Works Auth Jump to: navigation, search Name Tahlequah Public Works Auth Place Oklahoma Utility Id 18433 Utility Location Yes Ownership M NERC Location SPP NERC SPP Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Academic Commercial City Services Commercial Large Commercial LC-1 Commercial Large Commercial LC-2 Commercial Large Commercial LC-3 Commercial Northeastern State University Commercial Outdoor Lighting MH 400 W Lighting Outdoor Lighting MV 175 W Lighting Outdoor Lighting MV 250 W Lighting Residential Residential

344

FINAL Transportation External Coordination Working Group (TEC)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transportation External Coordination Working Group (TEC) January 28-30, 2002 New Orleans, Louisiana Meeting Summary The Transportation External Coordination Working Group (TEC) held its 20 th semi-annual meeting January 28-30, 2002, in New Orleans, Louisiana. This was the tenth anniversary of TEC, and 102 attendees from national, State, Tribal, and local government organizations; industry and professional groups and other interested parties in the U.S. Department of Energy (DOE) programs, met to address a variety of issues related to DOE's radioactive materials transportation activities. The TEC process includes the involvement of these key stakeholders in developing solutions to DOE transportation issues through their actual participation in the work product. These members provide continuing and improved

345

Transportation External Coordination Working Group (TEC)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transportation External Coordination Working Group (TEC) Transportation External Coordination Working Group (TEC) July 17-19, 2001 Cincinnati, Ohio Meeting Summary The Transportation External Coordination Working Group (TEC) held its 19 th semi-annual meeting July 17-19, 2001, in Cincinnati, Ohio. One hundred fifteen people attended (see Appendix A for listing of participants). Jim Carlson, U.S. Department of Energy (DOE) Office of Civilian Radioactive Waste Management (OCRWM) and TEC co-chair, welcomed participants to the meeting. He then introduced Robert Owen of the Ohio Department of Health, and Jim Richter of the Cincinnati/Hamilton County Emergency Management Agency, who also made some welcoming remarks. Topic Group Meetings Tribal Issues Topic Group Issues discussed during this meeting included the Federal Railroad Administration (FRA) rail safety pilot

346

Anadarko Public Works Auth | Open Energy Information  

Open Energy Info (EERE)

Anadarko Public Works Auth Anadarko Public Works Auth Jump to: navigation, search Name Anadarko Public Works Auth Place Oklahoma Utility Id 588 Utility Location Yes Ownership M NERC Location SPP NERC SPP Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png COMMERCIAL (C1):link Commercial LARGE COMMERCIAL 1 (LC1) Commercial LARGE POWER 1 (LP1) Commercial LIGHT AND POWER 7 PEAK MANAGEMENT (LP7) Commercial LIMITED USAGE RESIDENTIAL SERVICE R-2 Residential RESIDENTIAL SERVICE (R1) Residential Average Rates Residential: $0.1040/kWh Commercial: $0.0895/kWh References ↑ "EIA Form EIA-861 Final Data File for 2010 - File1_a"

347

WIPP AT WORK | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

WIPP AT WORK WIPP AT WORK WIPP AT WORK February 1, 2010 - 12:00pm Addthis Carlsbad, NM - Transuranic (TRU) waste cleanup efforts are underway across the DOE complex, as the Waste Isolation Pilot Plant (WIPP) wraps up its 11th year of disposal operations. The Carlsbad Field Office (CBFO) manages the DOE's National TRU Program (NTP) Office and WIPP facility operations. TRU waste temporarily stored at DOE generator sites around the country is shipped to WIPP and disposed in rooms mined out of an ancient salt formation 2,150 feet below the surface. WIPP, which began waste disposal operations in 1999, is located 26 miles outside of Carlsbad, New Mexico. Over the last year, CBFO has successfully completed two major remote-handled (RH) TRU waste shipping campaigns and continues efforts to

348

September 2012, Training Work Group Status Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Work Group Status Overview Training Work Group Status Overview Accomplishments: 1. May 7-8. Attended NIEHS Trainer's Exchange in Oak Ridge. 2. May 8-9. Joined HAMMER in visiting Oak Ridge entities to build support for the Radworker pilot. Entities visited included ORISE, Y-12, DOE TRU Project, and local labor entities. 3. June 19-20. Participated with Char Wells, Sandia National Laboratory Training Manager, (NTC, NIEHS and HAMMER in attendance) at a DOE M&O contractor led Learning/Training Workshop. - Obtained EFCOG commitment to create a Human Capital Training Subgroup under the Business Management Working Group. - Serving this group as data repository and communications hub for efforts to standardize General Employee Radiation Training (GERT) within DOE. - Briefed the complex wide Radworker reciprocity concept finding interest and

349

A process for creating Celtic knot work  

E-Print Network (OSTI)

Celtic art contains mysterious and fascinating aesthetic elements including complex knot work motifs. The problem is that creating and exploring these motifs require substantial human effort. One solution to this problem is to create a process that collaboratively uses interactive and procedural methods within a computer graphic environment. Spline models of Celtic knot work can be interactively modeled and used as input into procedural shaders. Procedural shaders are computer programs that describe surface, light, and volumetric appearances to a renderer. The control points of spline models can be used to drive shading procedures such as the coloring and displacement of surface meshes. The result of this thesis provides both an automated and interactive process that is capable of producing complex interlaced structures such as Celtic knot work within a three-dimensional environment.

Parks, Hunter Guymin

2005-05-01T23:59:59.000Z

350

Low work function thermionic emission materials  

DOE Green Energy (OSTI)

Thermionic energy conversion in a microminiature format shows potential as a viable, high efficiency, on-chip power source. Microminiature thermionic converters (MTC) with inter-electrode spacings on the order of microns are currently being prototyped and evaluated at Sandia. The remaining enabling technology is the development of low work function materials and processes than can be integrated into these converters. In this report, the authors demonstrate a method of incorporating thin film emitters into converters using rf sputtering. They find that the resultant films possess a minimum work function of 1.2 eV. Practical energy conversion is hindered by surface work function non-uniformity. They postulate the source of this heterogeneity to be a result of limited bulk and surface transport of barium. Several methods are proposed for maximizing transport, including increased film porosity and the use of metal terminating layers. They demonstrate a novel method for incorporating film porosity based on metal interlayer coalescence.

Zavadil, K.R.; King, D.B.; Ruffner, J.A.

1999-11-01T23:59:59.000Z

351

NREL: About NREL - Working with Us  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with Us Working with Us NREL offers many opportunities to industry, organizations, governments, researchers, small businesses, students, educators, and vendors. Photo of two men in suits walking and talking with people in background. Industry, Organizations, and Governments We welcome organizations to partner with us on R&D and deployment projects and to use our research facilities. Partnering with NREL Capabilities Research Facilities Technology Transfer Frequently Asked Questions Photo of five researchers in lab coats looking at a solar cell on a substrate wafer. Researchers We invite researchers and professionals from around the world to work with us. Careers at NREL Foreign Nationals Program Research Participant Program Director's Fellowship Photo of people seated at a long table listening to a speaker on stage. Small Businesses, Subcontractors, and Vendors

352

Wagoner Public Works Authority | Open Energy Information  

Open Energy Info (EERE)

Wagoner Public Works Authority Wagoner Public Works Authority Place Oklahoma Utility Id 20163 Utility Location Yes Ownership M NERC Location SPP NERC SPP Yes Activity Buying Transmission Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png INDUSTRIAL RATES Industrial LARGE COMMERCIAL RATES Commercial RESIDENTIAL RATES Residential SMALL COMMERCIAL RATES Commercial Average Rates Residential: $0.0954/kWh Commercial: $0.0873/kWh Industrial: $0.0753/kWh References ↑ "EIA Form EIA-861 Final Data File for 2010 - File1_a" Retrieved from "http://en.openei.org/w/index.php?title=Wagoner_Public_Works_Authority&oldid=412137

353

Working with MDF | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

MDF MDF Working with MDF MDF | Manufacturing Demonstration Facility Home | User Facilities | MDF | Working with MDF SHARE Technology Collaborations for US Manufacturers in Advanced Manufacturing and Materials Technologies Oak Ridge National Laboratory is seeking industry partners to participate in short-term, collaborative projects within the Manufacturing Demonstration Facility to assess applicability and of new energy efficient manufacturing technologies. This opportunity will provide selected participants access to ORNL's experienced staff and unique equipment and capabilities to demonstrate proof-of-principle for advanced concepts with intent to develop and deploy new manufacturing processes or materials in U.S. manufacturing industries. ORNL is requesting proposals from industry to assess applicability of new

354

Live Working Tools for High Temperature Conductors  

Science Conference Proceedings (OSTI)

In long-duration (several days) tests, strain link sticks used for live work were removed from service and exposed to conductors operating at high temperature of about 250-260C. Only strain link sticks were tested to date. Results obtained do not indicate damage or deterioration of the tested sticks. The research is a joint effort between project 35.010 Live Working Research for Overhead Transmission Equipment, Techniques, Procedures and Protective Grounding and project 35.015 Advanced Conductors to inve...

2010-12-17T23:59:59.000Z

355

Abandoned Mine Waste Working Group report  

SciTech Connect

The Mine Waste Working Group discussed the nature and possible contributions to the solution of this class of waste problem at length. There was a consensus that the mine waste problem presented some fundamental differences from the other classes of waste addresses by the Develop On-Site Innovative Technologies (DOIT) working groups. Contents of this report are: executive summary; stakeholders address the problems; the mine waste program; current technology development programs; problems and issues that need to be addressed; demonstration projects to test solutions; conclusion-next steps; and appendices.

Not Available

1993-12-10T23:59:59.000Z

356

Overview of Incidents Related to Live Working  

Science Conference Proceedings (OSTI)

This report is a summary of progress in the research on injury and fatality information among workers who perform energized (live) and/or de-energized work. While every effort is made in the industry to avoid incidents during work on energized and de-energized lines, they do occur, and there are lessons embedded within every incident from which the utility industry can benefit, if the incidents are thoroughly analyzed, root causes are identified, and corrective actions are taken. The primary objective of...

2006-03-30T23:59:59.000Z

357

ClimateWorks | Open Energy Information  

Open Energy Info (EERE)

ClimateWorks ClimateWorks Jump to: navigation, search Logo: ClimateWorks Name ClimateWorks Address 235 Montgomery Street, Suite 1300, Place San Francisco, CA Zip 94104 Region Bay Area Number of employees 11-50 Year founded 2008 Phone number 415.433.0500 Website http://www.climateworks.org/ Coordinates 37.791386°, -122.402859° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.791386,"lon":-122.402859,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

358

Academic Achievement And Work In West  

E-Print Network (OSTI)

............................................................20 #12;List of Tables 1. Summary Statistics for W.Va. Public Higher Education Graduates During.............................................................4 2. Work Participation Rates For W.Va. Public Higher Education Graduates With ACT Score Reported ..........................................................................................................7 4. Annualized Wages For W.Va. Public Higher Education Graduates With ACT Score Reported

Mohaghegh, Shahab

359

Assigning multiple activities to work shifts  

Science Conference Proceedings (OSTI)

In some companies such as large retail stores, the employees perform different activities (e.g., cashier or clerk in a specific department) to respond to a customer demand for each activity that varies over the planning horizon and must be fulfilled ... Keywords: Activity assignment, Column generation, Multi-commodity network flow model, Rolling horizon, Work shifts

Quentin Lequy; Mathieu Bouchard; Guy Desaulniers; Franois Soumis; Beyime Tachefine

2012-04-01T23:59:59.000Z

360

Report of the tunnel safety working group  

Science Conference Proceedings (OSTI)

On 18 February 1991 the Project Manager formed a working group to address the safety guidelines and requirements for the underground facilities during the period of accelerator construction, installation, and commissioning. The following report summarizes the research and discussions conducted by the group and the recommended guidelines for safety during this phase of the project.

Gannon, J.

1991-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Working on the moon: The Apollo experience  

Science Conference Proceedings (OSTI)

The successful completion of any scientific or engineering project on the Moon will depend, in part, on human ability to do useful work under lunar conditions. In making informed decisions about such things as the use of humans rather than robots for specific tasks, the scheduling of valuable human time, and the design and selection of equipment and tools, good use can be made of the existing experience base. During the six completed landing missions, Apollo lunar surface crews conducted 160 astronaut-hours of extra-vehicular activities (EVAs) and also spent a similar sum of waking hours working in the cramped confines of the Lunar Module. The first three missions were primarily proof-tests of flight hardware and procedures. The ability to land equipment and consumables was very modest but, despite stay times of no more than 32 hours, the crews of Apollos 11, 12, and 14 were able to test their mobility and their capability of doing useful work outside the spacecraft. For the last three missions, thanks to LM modifications which enabled landings with significant amounts of cargo, stay times more than doubled to three days. The crews were able to use Lunar Rovers to conduct extensive local exploration and to travel up to 10 kilometers away from their immediate landing sites. During these final missions, the astronauts spent enough time doing work of sufficient complexity that their experience should be of use in the formulation early-stage lunar base operating plans. 2 refs.

Jones, E.M.

1989-01-01T23:59:59.000Z

362

DOE Hydrogen Pipeline Working Group Workshop  

E-Print Network (OSTI)

DOE Hydrogen Pipeline Working Group Workshop August 31, 2005 Augusta, Georgia #12;Hydrogen Pipeline Experience Presented By: LeRoy H. Remp Lead Project Manager Pipeline Projects #12;ppt00 3 Hydrogen Pipeline and the customer. #12;ppt00 4 Pipeline Photos #12;ppt00 5 Pipeline Photos #12;ppt00 6 Pipeline Photos #12;ppt00 7

363

How does Google work? Three aspects  

E-Print Network (OSTI)

How does Google work? Three aspects: 1 How does Google know what is on the Web? 2 How does Google search the Web for your query phrase? 3 How does Google decide which results you may be interested in? Google is not the first Search Engine, earlier were, for example, Altavista and Yahoo. Google introduced

Rydeheard, David

364

MSU AT WORK IN BRAZIL: AN OVERVIEW  

E-Print Network (OSTI)

MSU AT WORK IN BRAZIL: AN OVERVIEW InternationalStudiesandPrograms Michigan State University. With more than 100 faculty members studying issues related to Brazil, Michigan State University is strategically placed to have a positive impact in Brazil and beyond. MSU is supporting Brazil in its efforts

Liu, Taosheng

365

ICDF Complex Remedial Action Work Plan  

SciTech Connect

This Remedial Action Work Plan provides the framework for operation of the Idaho Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Disposal Facility Complex (ICDF). This facility includes (a) an engineered landfill that meets the substantial requirements of DOE Order 435.1, Resource Conservation and Recovery Act Subtitle C, Idaho Hazardous Waste Management Act, and Toxic Substances Control Act polychlorinated biphenyl landfill requirements; (b) centralized receiving, inspections, administration, storage/staging, and treatment facilities necessary for CERCLA investigation-derived, remedial, and removal waste at the Idaho National Laboratory (INL) prior to final disposition in the disposal facility or shipment off-Site; and (c) an evaporation pond that has been designated as a corrective action management unit. The ICDF Complex, including a buffer zone, will cover approximately 40 acres, with a landfill disposal capacity of approximately 510,000 yd3. The ICDF Complex is designed and authorized to accept INL CERCLA-generated wastes, and includes the necessary subsystems and support facilities to provide a complete waste management system. This Remedial Action Work Plan presents the operational approach and requirements for the various components that are part of the ICDF Complex. Summaries of the remedial action work elements are presented herein, with supporting information and documents provided as appendixes to this work plan that contain specific detail about the operation of the ICDF Complex. This document presents the planned operational process based upon an evaluation of the remedial action requirements set forth in the Operable Unit 3-13 Final Record of Decision.

W. M. Heileson

2006-12-01T23:59:59.000Z

366

Gain International Work Experience in China  

E-Print Network (OSTI)

Gain International Work Experience in China www.StudyCLI.org "The CLI internship gave me a huge boost both personally and professionally. At 21 years old, I've lived in China and can speak basic city of Guilin, China. CLIinternsengageinadynamicrangeofprojects: Y Establishnewrelationshipswith

Virginia Tech

367

Standardization of Work: Co-constructed Practice  

Science Conference Proceedings (OSTI)

There is strong pressure to achieve greater uniformity, standardization and application of best practices in the service professions, a sector that is growing in presence and importance. At the same time, there is a conflicting demand for the delivery ... Keywords: classification, health care, nursing, service work, standardization

Gunnar Ellingsen; Eric Monteiro; Glenn Munkvold

2007-10-01T23:59:59.000Z

368

Community e-government coordination work platform  

Science Conference Proceedings (OSTI)

Community Management informatization is an important component of urban informatization. Community E-government coordination work platform is the key to community management informatization. This paper proposed a system mode of community E-government ... Keywords: community informatization, e-government, information integration

Jiang Luquan; Zhang Pengzhu; Wang Huanchen

2005-05-01T23:59:59.000Z

369

Weak information work in scientific discovery  

Science Conference Proceedings (OSTI)

Scientists continually work with information to move their research projects forward, but the activities involved in finding and using information and their impact on discovery are poorly understood. In the Information and Discovery in Neuroscience (IDN) ... Keywords: Information practices, Information seeking, Neuroscience, Research processes, Scientific discovery

Carole L. Palmer; Melissa H. Cragin; Timothy P. Hogan

2007-05-01T23:59:59.000Z

370

TEC Working Group Topic Groups Rail Key Documents Intermodal...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Intermodal Subgroup TEC Working Group Topic Groups Rail Key Documents Intermodal Subgroup Intermodal Subgroup Draft Work Plan More Documents & Publications TEC Working Group Topic...

371

PROJECT MANGEMENT PLAN EXAMPLES Prepare Detailed Work Packages...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Work Packages Examples Example 71 8.2.5 Work Processes Work associated with nuclear safety functions will be planned, authorized, and performed following approved technical...

372

Headquarters Facilities Work Planning and Control Program | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Headquarters Facilities Work Planning and Control Program Headquarters Facilities Work Planning and Control Program Headquarters Facilities Work Planning and Control Program...

373

U.S. CMS - U.S. CMS @ Work - Working at CERN - Relocating to...  

NLE Websites -- All DOE Office Websites (Extended Search)

Short Term For the French and Swiss invitations, the following information is needed: Gender: (malefemale) Work address: (including street address for Federal Express) Home...

374

How did you make the detectors work in...  

NLE Websites -- All DOE Office Websites (Extended Search)

How did you make the detectors work in halls A, B and C? Well how did we get them to work? A lot of us worked in teams, really hard, and continue to work to make the detectors...

375

Putting the sun to work in Sacramento  

SciTech Connect

At dawn this morning, the sun went to work for customers of the Sacramento Municipal Utility District (SMUD). The largest photovoltaic (PV) power plant in the world, adjacent to the closed nuclear power plant at Rancho Seco, generated enough electricity for over a thousand customers, rooftop solar water heaters lowered thousands of residential electric bills and rooftop PV systems turned hundreds of Sacramento homes into mini power plants. SMUD, in partnership with their customers-owners, is leading the way in putting the sun to work today. SMUD plans to have at least half of its energy come from energy efficiency, existing hydroelectric plants and renewable resources in this decade. SMUD expects investments made in solar power today to provide its customer-owners with substantial long-term energy, environmental and community benefits. This article describes some of SMUD's efforts.

Osborn, D.E.

2000-06-01T23:59:59.000Z

376

Intermodal Subgroup Draft Work Plan2  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 of 2 Work Plan for the DOE TEC Rail Topic Group Intermodal Sub-Group Status: Active Chair: Melissa Bailey (CSG-NE) DOE Lead: Alex Thrower (OCRWM) Contractor Support: John Smegal (Legin) Start Date: July 17, 2007 Purpose: The purpose of the Transportation External Coordinating (TEC) Working Group's Rail Topic Group (RTG) is to provide stakeholder perspectives and feedback to the Office of National Transportation (ONT) in the Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM) and Environmental Management (EM) regarding topics of common interest concerning operating practices, logistical constraints, and other rail-related issues affecting the development and deployment of a safe, secure, and efficient system for transporting spent fuel (SNF) and high-level radioactive waste (HLW) to a

377

Working with Us | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Us Us Working with Us Secretary Chu takes a holistic view to diversity, recognizing that the goal of ensuring equal access to participation in the Department's programs and policies comes through in our workforce, our partners, our research, our policies, our education efforts, and our work with the general public. Our core constituenties include: Historically Underrepresented Communities Small Businesses Minority Serving Institutions Departmental Workforce Tribal Communities Minority Banks * indicates required Email * Subscribe Office of Economic Impact and Diversity Blog Why 3D Printers Might Create the Next Robotic Champion December 11, 2013 4:18 PM High school teams competing in the FIRST Robotics Competition should head over to this FIRST Robotics website to put in their bid for a free Cube 3D

378

Cloud Properties Working Group Low Clouds Update  

NLE Websites -- All DOE Office Websites (Extended Search)

Cloud Properties Working Group Cloud Properties Working Group Low Clouds Update Low Clouds Update Jennifer Comstock Jennifer Comstock Dave Turner Dave Turner Andy Andy Vogelmann Vogelmann Instruments Instruments 90/150 GHz microwave radiometer 90/150 GHz microwave radiometer Deployed during COPS AMF Deployed during COPS AMF Exploring calibration w/ DPR ( Exploring calibration w/ DPR ( Crewell Crewell & & L L ö ö hnert hnert ) ) See COPS Breakout, Wednesday evening See COPS Breakout, Wednesday evening 183 GHz (GVR) deployed at the NSA 183 GHz (GVR) deployed at the NSA Neural network algorithm to retrieve PWV & LWP (Maria Neural network algorithm to retrieve PWV & LWP (Maria Cadeddu Cadeddu ) ) Potential VAP candidate (RPWG) Potential VAP candidate (RPWG)

379

Federal Utility Partnership Working Group Meeting Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MAY 3-4, 2006 MAY 3-4, 2006 ATLANTA, GEORGIA INTRODUCTION The Federal Utility Partnership Working Group (FUPWG) held its Spring 2006 meeting in Atlanta, Georgia, on May 3-4. A total of 77 individuals attended the meeting. Participants included officials from Federal Energy Management Program (FEMP) representatives, other Federal agencies, national laboratories, the utility industry, and representatives from energy-related organizations. The working group is a joint effort between FEMP and the utility industry to stimulate the exchange of information among participants and foster energy efficiency projects in Federal facilities nationwide. The Spring 2006 FUPWG meeting was hosted by Atlanta Gas and Light. The agenda included the following presentations:

380

Federal Utility Partnership Working Group Meeting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 Report Page 1 of 26 3 Report Page 1 of 26 Federal Utility Partnership Working Group Meeting May 22-23, 2013 Hosted by PG&E San Francisco, CA Meeting Record The Federal Utility Partnership Working Group (FUPWG) is a joint effort between the Federal Energy Management Program (FEMP) and the utility industry to stimulate the exchange of information among participants and foster energy efficiency projects in Federal facilities nationwide. The FUPWG meeting was held in San Francisco, CA on May 22-23 and was attended by 203 professionals: 52 Federal agency/lab representatives 62 utility officials 89 representatives from energy-related organizations An additional 45 professionals participated in the Wednesday morning session via webinar. This was the first time a webinar option was offered. Feedback from the participants was very positive, especially from

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Research Highlights Sorted by Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Working Group Working Group Aerosol Life Cycle | Cloud Life Cycle | Cloud-Aerosol-Precipitation Interactions | Aerosol | Cloud Modeling | Cloud Properties | Radiative Processes Aerosol Life Cycle 2013 Bhattacharya, A. Wildfires Lead to More Warming Than Climate Models Predict, a New Mexico Fire Study Reports ASR Fast, J. . Development and Validation of a Black Carbon Mixing State Resolved Three-Dimensional Model ARM ASR Gilles, M., Moffet, R. Spectro-microscopic Measurements of Carbonaceous Aerosol Aging in Central California ARM ASR Kafle, D. N., Coulter, R. L. Micropulse Lidar-Derived Aerosol Optical Depth Climatology at ARM Sites Worldwide ARM Keppel-Aleks, G. Determining the Future of CO2 Using an Earth System Model ARM Li, Z. A Mixed Bag of Aerosols over Northeastern China ARM

382

Working at Argonne's Center for Nanoscale Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

Working at CNM Working at CNM For information on visiting Argonne National Laboratory, collaborating with us, or becoming an independent outside user of our facilities, please contact the CNM User Office. Hours of Operation The CNM, which is mandated to offer user access only 40 hours per week, provides users with routine access to facilities and instrumentation, as well as technical assistance when needed, between the hours of 7:00 a.m. and 7:00 p.m., Monday-Friday, except for Laboratory holidays and maintenance shutdowns. These hours are also in place for the availability of staff in the Theory and Modeling and X-Ray Microscopy Groups. The supercomputing facility (Carbon) and the hard X-ray nanoprobe facility at Sector 26 of the APS are available 24 hours, 7 days a week, except for maintenance shutdowns.

383

TeamWorks09-30-04  

NLE Websites -- All DOE Office Websites (Extended Search)

30, 2004 30, 2004 By the Numbers Congressional delegates tour WIPP Transportation and disposal statistics are available on pages 3 and 4. D E P A R T M E N T O F E N E R G Y U N I T E D S T A T ES O F A M E R I C A TeamWorks TeamWorks TRU A biweekly e-newsletter for the Waste Isolation Pilot Plant team roject personnel were honored to host a group of distinguished visitors on a rare weekend tour that included Chairman David Hobson of the U.S. House of Representatives Energy and Water Development Appropriations subcommittee; Ambassador Linton Brooks, Under Secretary for Nuclear Security; Congressman Steve Pearce; Ines Triay, DOE-EM Deputy Chief Operating Officer, Susan Grant, DOE Chief Financial Officer and several state and city officials. CBFO Deputy Manager Lloyd Piper said it was apparent that the

384

Federal Utility Partnership Working Group Meeting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 Report Page 1 of 18 2 Report Page 1 of 18 Federal Utility Partnership Working Group Meeting April 11-12, 2012 Hosted by AGL Resources Jekyll Island, GA Meeting Record The Federal Utility Partnership Working Group (FUPWG) is a joint effort between the Federal Energy Management Program (FEMP) and the utility industry to stimulate the exchange of information among participants and foster energy efficiency projects in Federal facilities nationwide. The FUPWG meeting held in Jekyll Island, GA, on April 11 -12 was attended by 222 professionals: * 59 utility officials * 52 federal agency representatives * 10 national laboratory representatives * 101 representatives from energy-related organizations The complete meeting participant list can be found in Appendix A and the meeting agenda in Appendix B.

385

TEC Working Group Members | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Members Members TEC Working Group Members TEC members represent many different national, regional, tribal, state and local governmental, labor, industry and professional groups. To maximize the opportunity for broad-based input and information exchange, no single state, local or tribal governmental, or other entity is itself a member. Instead, membership is composed of organizations representing those perspectives. DOE programs participate in TEC by providing regular updates on key activities and provide resources and work on issues brought to the TEC by members or DOE. Members serve the group in three broad capacities: * Represent their constituent organizations; * Participate actively and consistently in TEC activities; and * Communicate the findings and recommendations of the group back to their

386

Long working distance incoherent interference microscope  

DOE Patents (OSTI)

A full-field imaging, long working distance, incoherent interference microscope suitable for three-dimensional imaging and metrology of MEMS devices and test structures on a standard microelectronics probe station. A long working distance greater than 10 mm allows standard probes or probe cards to be used. This enables nanometer-scale 3-dimensional height profiles of MEMS test structures to be acquired across an entire wafer while being actively probed, and, optionally, through a transparent window. An optically identical pair of sample and reference arm objectives is not required, which reduces the overall system cost, and also the cost and time required to change sample magnifications. Using a LED source, high magnification (e.g., 50.times.) can be obtained having excellent image quality, straight fringes, and high fringe contrast.

Sinclair, Michael B. (Albuquerque, NM); De Boer, Maarten P. (Albuquerque, NM)

2006-04-25T23:59:59.000Z

387

Healthy Housing Opportunities During Weatherization Work  

SciTech Connect

In the summer and early fall of 2010, the National Center for Healthy Housing interviewed people from a selection of state and local agencies that perform weatherizations on low-income housing in order to gauge their approach to improving the health and safety of the homes. The interviews provided a strong cross section of what work agencies can do, and how they go about funding this work when funds from the Weatherization Assistance Program (WAP) do not cover the full extent of the repairs. The report also makes recommendations for WAP in how to assist agencies to streamline and maximize the health and safety repairs they are able to make in the course of a standard weatherization.

Wilson, J.; Tohn, E.

2011-03-01T23:59:59.000Z

388

Transportation External Coordination Working Group (TEC)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Portland, Oregon - February 6-7, 2001 Portland, Oregon - February 6-7, 2001 Transportation External Coordination Working Group (TEC) February 6-7, 2001 Portland, Oregon Meeting Summary The Transportation External Coordination Working Group (TEC) held its 18 th semi-annual meeting February 6-7, 2001, in Portland, Oregon. Attending were 125 representatives from national, State, Tribal and local government organizations, industry and professional groups and other interested parties/DOE programs who meet to address a variety of issues related to DOE's radioactive materials transportation activities and provide continuing and improved coordination between DOE, other levels of government, and outside organizations with DOE transportation-related responsibilities. PLENARY I - TRANSCOM 2000 PRESENTATION (February 6)

389

Federal Utility Partnership Working Group Meeting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 Report Page 1 of 18 2 Report Page 1 of 18 Federal Utility Partnership Working Group Meeting October 16-17, 2012 Hosted by Alabama Power Mobile, Alabama Meeting Record The Federal Utility Partnership Working Group (FUPWG) is a joint effort between the Federal Energy Management Program (FEMP) and the utility industry to stimulate the exchange of information among participants and foster energy efficiency projects in Federal facilities nationwide. The FUPWG meeting held in Mobile, AL, on October 16-17 was attended by 179 professionals: 55 utility officials 39 federal agency representatives 10 national laboratory representatives 75 representatives from energy-related organizations The complete meeting participant list can be found in Appendix A and the meeting agenda in Appendix B.

390

DOE Guide to Working with Tribal Nations  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

for DOE Employees for DOE Employees WORKING WITH INDIAN TRIBAL NATIONS December 2000 ACKNOWLEDGMENTS The guide was developed for the U.S. Department of Energy by Creighton & Creighton, Inc., under contract to the Office of Intergovernmental and Public Accountability (EM-11). The guide was reviewed by representatives of several tribes and DOE staff who work regularly with tribal nations. However, Creighton & Creighton, Inc., remains responsible for the editorial content of this guide. This guide includes materials taken from guides prepared by the U.S. Environmental Protection Agency, the U.S. Forest Service, and the National Congress of American Indians and used without attribution. Creighton & Creighton, Inc., and the Department of Energy wish to thank these organizations for permission to use these

391

Working and Net Available Shell Storage Capacity  

U.S. Energy Information Administration (EIA) Indexed Site

Working Storage Capacity by PAD District as of September 30, 2013 Working Storage Capacity by PAD District as of September 30, 2013 (Thousand Barrels) Commodity 1 2 3 4 5 U.S. Total Ending Stocks Utilization Rate 1 Refineries Crude Oil 15,154 17,952 72,858 4,109 35,324 145,397 90,778 62% Fuel Ethanol 151 142 257 114 79 743 482 65% Natural Gas Plant Liquids and Liquefied Refinery Gases 2 1,149 10,996 24,902 581 2,219 39,847 19,539 49% Propane/Propylene (dedicated) 3 405 3,710 3,886 54 199 8,254 4,104 NA Motor Gasoline (incl. Motor Gasoline Blending Components)

392

Annual work plan for FY 1992  

SciTech Connect

The Office of Inspector General (OIG) has an overall mission to prevent and detect fraud, waste, and mismanagement in Department of Energy (DOE) programs. As part of its responsibility in accomplishing its mission, the DOE Office of Audits publishes an Annual Work Plan'' in September of each year. The prime focus of the plan is to identify opportunities for audits to enhance the effectiveness, efficiency, and integrity of the DOE's programs and operations. Through this plan, we are able to maximize the effectiveness of our resources and to avoid duplicating audit coverage being provided by other audit groups, such as the US General Accounting Office (GAO) to US Department of Energy programs. Such planning is required by Office of Management and Budget Circular A-73 and DOE Order 2321.1A. This work plan, includes those audits that are to be carried over from Fiscal Year 1991 and those that are to be started during Fiscal year 1992.

Not Available

1991-09-30T23:59:59.000Z

393

Development of Video Camera for Live Working  

Science Conference Proceedings (OSTI)

This report is an update on the progress in the development of a small lightweight video camera for use in live work. The camera is designed to be attached to the end of an insulating tool, can be placed directly near or at the object to be observed, and can transmit the video (and audio) signal remotely to a receiver. The receiver can be located at the other end of the insulating tool (hotstick) or at any place convenient for the ...

2012-12-21T23:59:59.000Z

394

Cold worked ferritic alloys and components  

DOE Patents (OSTI)

This invention relates to liquid metal fast breeder reactor and steam generator precipitation hardening fully ferritic alloy components which have a microstructure substantially free of the primary precipitation hardening phase while having cells or arrays of dislocations of varying population densities. It also relates to the process by which these components are produced, which entails solution treating the alloy followed by a final cold working step. In this condition, the first significant precipitation hardening of the component occurs during high temperature use.

Korenko, Michael K. (Wexford, PA)

1984-01-01T23:59:59.000Z

395

Live Work on High Temperature Conductors  

Science Conference Proceedings (OSTI)

Feedback from field personnel working with high-temperature conductors indicates that when a dead-end compression yoke assembly (DCYA) is installed on the conductor according to normal utility procedures, the soft aluminum strands are deformed and "birdcage." This is of course a concern to the field crews and the utility operating the line. This report presents results of research and tests performed on selected conductors operating at high temperature (approximately 250-260C) with selected live wor...

2011-12-13T23:59:59.000Z

396

Work Management Improvement at Burlington Generating Station  

Science Conference Proceedings (OSTI)

The Work Coordination Process (WCP), developed in an EPRI tailored collaboration effort to upgrade the maintenance program at Burlington Generating Station, is an organized methodology to prepare for and perform preventative and corrective maintenance during both outages and running periods. The coordinating process supports both the need of operational personnel for maximum equipment availability and the need of maintenance personnel for access to plant equipment to ensure maximum reliability.

2001-11-19T23:59:59.000Z

397

Nanoscale Chemical Imaging of a Working Catalyst  

NLE Websites -- All DOE Office Websites (Extended Search)

Nanoscale Chemical Imaging of a Working Catalyst Print Nanoscale Chemical Imaging of a Working Catalyst Print The heterogeneous catalysts used in most chemical processes typically consist of nanoscale metal or metal oxide particles dispersed on high-surface-area supports. While these particles are the active elements of the catalyst, the overall performance depends not only on their size and composition but also on their multiple interactions with the support, reactants, and products. Probing this chemical soup in real time under realistic reaction conditions is such a tall order that in some cases even the catalytically active chemical species is not known. A Dutch team working at the ALS has combined scanning transmission x-ray microscopy with a reaction chamber adapted from electron microscopy to identify the chemical species present for an iron-based Fischer-Tropsch synthesis catalyst and to image their distribution on the nanoscale. When developed further, this new tool may give chemists the ability to design and tailor catalysts for maximum selectivity and efficiency in a wide range of chemical processes.

398

Nanoscale Chemical Imaging of a Working Catalyst  

NLE Websites -- All DOE Office Websites (Extended Search)

Nanoscale Chemical Imaging of a Nanoscale Chemical Imaging of a Working Catalyst Nanoscale Chemical Imaging of a Working Catalyst Print Wednesday, 28 January 2009 00:00 The heterogeneous catalysts used in most chemical processes typically consist of nanoscale metal or metal oxide particles dispersed on high-surface-area supports. While these particles are the active elements of the catalyst, the overall performance depends not only on their size and composition but also on their multiple interactions with the support, reactants, and products. Probing this chemical soup in real time under realistic reaction conditions is such a tall order that in some cases even the catalytically active chemical species is not known. A Dutch team working at the ALS has combined scanning transmission x-ray microscopy with a reaction chamber adapted from electron microscopy to identify the chemical species present for an iron-based Fischer-Tropsch synthesis catalyst and to image their distribution on the nanoscale. When developed further, this new tool may give chemists the ability to design and tailor catalysts for maximum selectivity and efficiency in a wide range of chemical processes.

399

Nanoscale Chemical Imaging of a Working Catalyst  

NLE Websites -- All DOE Office Websites (Extended Search)

Nanoscale Chemical Imaging of a Working Catalyst Print Nanoscale Chemical Imaging of a Working Catalyst Print The heterogeneous catalysts used in most chemical processes typically consist of nanoscale metal or metal oxide particles dispersed on high-surface-area supports. While these particles are the active elements of the catalyst, the overall performance depends not only on their size and composition but also on their multiple interactions with the support, reactants, and products. Probing this chemical soup in real time under realistic reaction conditions is such a tall order that in some cases even the catalytically active chemical species is not known. A Dutch team working at the ALS has combined scanning transmission x-ray microscopy with a reaction chamber adapted from electron microscopy to identify the chemical species present for an iron-based Fischer-Tropsch synthesis catalyst and to image their distribution on the nanoscale. When developed further, this new tool may give chemists the ability to design and tailor catalysts for maximum selectivity and efficiency in a wide range of chemical processes.

400

Nanoscale Chemical Imaging of a Working Catalyst  

NLE Websites -- All DOE Office Websites (Extended Search)

Nanoscale Chemical Imaging of a Working Catalyst Print Nanoscale Chemical Imaging of a Working Catalyst Print The heterogeneous catalysts used in most chemical processes typically consist of nanoscale metal or metal oxide particles dispersed on high-surface-area supports. While these particles are the active elements of the catalyst, the overall performance depends not only on their size and composition but also on their multiple interactions with the support, reactants, and products. Probing this chemical soup in real time under realistic reaction conditions is such a tall order that in some cases even the catalytically active chemical species is not known. A Dutch team working at the ALS has combined scanning transmission x-ray microscopy with a reaction chamber adapted from electron microscopy to identify the chemical species present for an iron-based Fischer-Tropsch synthesis catalyst and to image their distribution on the nanoscale. When developed further, this new tool may give chemists the ability to design and tailor catalysts for maximum selectivity and efficiency in a wide range of chemical processes.

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Nanoscale Chemical Imaging of a Working Catalyst  

NLE Websites -- All DOE Office Websites (Extended Search)

Nanoscale Chemical Imaging of a Working Catalyst Print Nanoscale Chemical Imaging of a Working Catalyst Print The heterogeneous catalysts used in most chemical processes typically consist of nanoscale metal or metal oxide particles dispersed on high-surface-area supports. While these particles are the active elements of the catalyst, the overall performance depends not only on their size and composition but also on their multiple interactions with the support, reactants, and products. Probing this chemical soup in real time under realistic reaction conditions is such a tall order that in some cases even the catalytically active chemical species is not known. A Dutch team working at the ALS has combined scanning transmission x-ray microscopy with a reaction chamber adapted from electron microscopy to identify the chemical species present for an iron-based Fischer-Tropsch synthesis catalyst and to image their distribution on the nanoscale. When developed further, this new tool may give chemists the ability to design and tailor catalysts for maximum selectivity and efficiency in a wide range of chemical processes.

402

Nanoscale Chemical Imaging of a Working Catalyst  

NLE Websites -- All DOE Office Websites (Extended Search)

Nanoscale Chemical Imaging of a Working Catalyst Print Nanoscale Chemical Imaging of a Working Catalyst Print The heterogeneous catalysts used in most chemical processes typically consist of nanoscale metal or metal oxide particles dispersed on high-surface-area supports. While these particles are the active elements of the catalyst, the overall performance depends not only on their size and composition but also on their multiple interactions with the support, reactants, and products. Probing this chemical soup in real time under realistic reaction conditions is such a tall order that in some cases even the catalytically active chemical species is not known. A Dutch team working at the ALS has combined scanning transmission x-ray microscopy with a reaction chamber adapted from electron microscopy to identify the chemical species present for an iron-based Fischer-Tropsch synthesis catalyst and to image their distribution on the nanoscale. When developed further, this new tool may give chemists the ability to design and tailor catalysts for maximum selectivity and efficiency in a wide range of chemical processes.

403

Fuel Cell Technologies Office: Durability Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Durability Working Group Durability Working Group The Durability Working Group meets twice per year to exchange information, create synergies, and collaboratively develop both an understanding of and tools for studying degradation mechanisms of polymer electrolyte fuel cell stacks. Its members include principle investigators and supporting personnel from U.S. Department of Energy (DOE)-funded durability projects. More information on DOE durability activities can be found in the Multi-Year Research, Development, and Demonstration Plan. Description Technical Targets Meetings Contacts Description DOE durability targets for stationary and transportation fuel cells are 40,000 hours and 5,000 hours, respectively, under realistic operating conditions. In the most demanding applications, realistic operating conditions include impurities in the fuel and air, starting and stopping, freezing and thawing, and humidity and load cycles that result in stresses on the chemical and mechanical stability of the fuel cell materials, components, and interfaces. Degradation-exacerbating conditions resulting from cyclic operation include hydrogen starvation, differential pressure imbalance, oxidation-reduction cycling, and oxygen ingress to the anode, resulting in high cathode potentials. Significant progress has been made in determining the degradation mechanisms of fuel cell components and developing improved materials. However, as stated in the 2008 DOE Fuel Cell Solicitation, there is a need for further research and development in the following areas:

404

Peak Underground Working Natural Gas Storage Capacity  

Gasoline and Diesel Fuel Update (EIA)

Methodology Methodology Methodology Demonstrated Peak Working Gas Capacity Estimates: Estimates are based on aggregation of the noncoincident peak levels of working gas inventories at individual storage fields as reported monthly over a 60-month period ending in April 2010 on Form EIA-191M, "Monthly Natural Gas Underground Storage Report." The months of measurement for the peak storage volumes by facilities may differ; i.e., the months do not necessarily coincide. As such, the noncoincident peak for any region is at least as big as any monthly volume in the historical record. Data from Form EIA-191M, "Monthly Natural Gas Underground Storage Report," are collected from storage operators on a field-level basis. Operators can report field-level data either on a per reservoir basis or on an aggregated reservoir basis. It is possible that if all operators reported on a per reservoir basis that the demonstrated peak working gas capacity would be larger. Additionally, these data reflect inventory levels as of the last day of the report month, and a facility may have reached a higher inventory on a different day of the report month, which would not be recorded on Form EIA-191M.

405

Spent Fuel Working Group Report. Volume 1  

SciTech Connect

The Department of Energy is storing large amounts of spent nuclear fuel and other reactor irradiated nuclear materials (herein referred to as RINM). In the past, the Department reprocessed RINM to recover plutonium, tritium, and other isotopes. However, the Department has ceased or is phasing out reprocessing operations. As a consequence, Department facilities designed, constructed, and operated to store RINM for relatively short periods of time now store RINM, pending decisions on the disposition of these materials. The extended use of the facilities, combined with their known degradation and that of their stored materials, has led to uncertainties about safety. To ensure that extended storage is safe (i.e., that protection exists for workers, the public, and the environment), the conditions of these storage facilities had to be assessed. The compelling need for such an assessment led to the Secretary`s initiative on spent fuel, which is the subject of this report. This report comprises three volumes: Volume I; Summary Results of the Spent Fuel Working Group Evaluation; Volume II, Working Group Assessment Team Reports and Protocol; Volume III; Operating Contractor Site Team Reports. This volume presents the overall results of the Working Group`s Evaluation. The group assessed 66 facilities spread across 11 sites. It identified: (1) facilities that should be considered for priority attention. (2) programmatic issues to be considered in decision making about interim storage plans and (3) specific vulnerabilities for some of these facilities.

O`Toole, T.

1993-11-01T23:59:59.000Z

406

FY 1987 current fiscal year work plan  

SciTech Connect

This Current Year Work Plan presents a detailed description of the activities to be performed by the Joint Integration Office during FY87. It breaks down the activities into two major work areas: Program Management and Program Analysis. Program Management is performed by the JIO by providing technical planning and guidance for the development of advanced TRU waste management capabilities. This includes equipment/facility design, engineering, construction, and operations. These functions are integrated to allow transition from interim storage to final disposition. JIO tasks include program requirements identification, long-range technical planning, budget development, program planning document preparation, task guidance, task monitoring, information gathering and task reporting to DOE, interfacing with other agencies and DOE lead programs, integrating public involvement with program efforts, and preparation of program status reports for DOE. Program Analysis is performed by the JIO to support identification and assessment of alternatives, and development of long-term TRU waste program capabilities. This work plan includes: system analyses, requirements analyses, interim and procedure development, legislative and regulatory analyses, dispatch and traffic analyses, and data bases.

1986-12-01T23:59:59.000Z

407

Nanoscale Chemical Imaging of a Working Catalyst  

NLE Websites -- All DOE Office Websites (Extended Search)

Nanoscale Chemical Imaging of a Working Catalyst Print Nanoscale Chemical Imaging of a Working Catalyst Print The heterogeneous catalysts used in most chemical processes typically consist of nanoscale metal or metal oxide particles dispersed on high-surface-area supports. While these particles are the active elements of the catalyst, the overall performance depends not only on their size and composition but also on their multiple interactions with the support, reactants, and products. Probing this chemical soup in real time under realistic reaction conditions is such a tall order that in some cases even the catalytically active chemical species is not known. A Dutch team working at the ALS has combined scanning transmission x-ray microscopy with a reaction chamber adapted from electron microscopy to identify the chemical species present for an iron-based Fischer-Tropsch synthesis catalyst and to image their distribution on the nanoscale. When developed further, this new tool may give chemists the ability to design and tailor catalysts for maximum selectivity and efficiency in a wide range of chemical processes.

408

Sustainable Energy Works LLC | Open Energy Information  

Open Energy Info (EERE)

Sustainable Energy Works LLC Sustainable Energy Works LLC Jump to: navigation, search Name Sustainable Energy Works LLC Address 106 Short Street Place Gahanna, Ohio Zip 43230 Sector Buildings, Efficiency, Renewable Energy, Services, Solar Product Agriculture; Consulting;Energy audits/weatherization; Investment/finances; Trainining and education Phone number 614-532-5622 Website http://www.seworksllc.com Coordinates 40.020296°, -82.877017° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.020296,"lon":-82.877017,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

409

Integrated Safety Management (ISM) - Work Planning and Control  

NLE Websites -- All DOE Office Websites (Extended Search)

Work Planning and Control Integrated Safety Management (ISM) ism logo NNSA Activity Level Work Planning & Control Processes - January 2006...

410

IEEE Standards Working Group P1622 on Voting Systems ...  

Science Conference Proceedings (OSTI)

IEEE Standards Working Group P1622 on Voting Systems Electronic Data Worked Examples of EML Usage. The OASIS ...

2012-03-06T23:59:59.000Z

411

Fiscal Year 2011 Work Performed Under the Work for Others Program at Sandia National Laboratories  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Audit Report Fiscal Year 2011 Work Performed Under the Work for Others Program at Sandia National Laboratories OAS-L-13-14 September 2013 Department of Energy Washington, DC 20585 September 25, 2013 MEMORANDUM FOR THE MANAGER, SANDIA FIELD OFFICE FROM: Rickey R. Hass Deputy Inspector General for Audits and Inspections Office of Inspector General SUBJECT: INFORMATION: Audit Report on "Fiscal Year 2011 Work Performed Under the Work for Others Program at Sandia National Laboratories" BACKGROUND The attached report presents the results of the audit of Sandia National Laboratories' (Sandia) Fiscal Year (FY) 2011 Work for Others (WFO) Program. The Office of Inspector General contracted with an independent certified public accounting firm, KPMG, LLP (KPMG), to assess

412

New ways of working: a proposed framework and literature review  

Science Conference Proceedings (OSTI)

The drive towards new ways of working is of great relevance to our modern world. Many companies and organizations have introduced aspects of this new approach in recent years, while many others are on the verge of doing so. The new way of working consists ... Keywords: activity related work, flexible office environment, flexible working, home working, new way of working, social ICT, telecommuting, teleworking

Merle Blok; Liesbeth Groenesteijn; Christiaan Van Den Berg; Peter Vink

2011-07-01T23:59:59.000Z

413

Dual Arm Work Module Development and Appplications  

SciTech Connect

The dual arm work module (DAWM) was developed at Oak Ridge National Laboratory (ORNL) by the Robotics Technology Development Program (RTDP) as a development test bed to study issues related to dual arm manipulation, including platform cotilguration, controls, automation, operations, and tooling. The original platform was based on two Schilling Titan II manipulators mounted to a 5-degree-of- freedom (DOF) base fabricated by RedZone Robotics, Inc. The 5-DOF articulation provided a center torso rotation, linear actuation to change the separation between the arms, and arm base rotation joints to provide "elbows up," elbows down," or "elbows out" orientation. A series of tests were conducted on operations, tooling, and task space scene analysis (TSSA)-driven robotics for overhead transporter- mounted and crane hook-deployed scenarios. A concept was developed for DAWM deployment from a large remote work vehicle, but the project was redirected to support dismantlement of the Chicago Pile #5 (CP-5) reactor at Argonne National Laboratory in fiscal year (FY) 1997. Support of CP-5 required a change in focus of the dual arm technology from that of a development test bed to a system focussed for a specific end user. ORNL teamed with the Idaho National Environmental ,Engineering Laboratory, Sandia National Laboratory, and the Savannah River Technology Center to deliver a crane-deployed derivative of the DAWM, designated the dual arm work platform (DAWP). RTDP staff supported DAWP at CP-5 for one FY; Argonne staff continued operation through to dismantlement of the reactor internals. Lessons learned from this interaction were extensive. Beginning in FY 1999, dual arm development activities are again being pursued in the context of those lessons learned. This paper describes the progression of philosophy of the DAWM from initial test bed to lessons learned through interaction at CP-5 and to the present investigation of telerobotic assist of teleoperation and TSSA- driven robotics.

Noakes, M.W.

1999-04-25T23:59:59.000Z

414

NREL: Electricity Integration Research - Working With Us  

NLE Websites -- All DOE Office Websites (Extended Search)

Power Systems Engineering Center Power Systems Engineering Center The Power Systems Engineering Center supports the science and technology goals of the U.S. Department of Energy and NREL toward a sustainable energy future. The center works with the electricity industry to optimize strategies for effectively interconnecting renewable resources and emerging energy efficiency technologies in the existing electric power system. The center focuses on resolving grid integration barriers and providing improved control and management strategies for increased grid flexibility, consumer empowerment, and transportation electrification. Organization Photo of Dr. Santiago Grijalva Dr. Santiago Grijalva is the director of the Power Systems Engineering Center. Dr. Grijalva is a leading researcher on ultra-reliable

415

Investigation of Jacketed Rope for Live Work  

Science Conference Proceedings (OSTI)

Since the early 1990s, insulating tools have been used for live work (LW). Initially tools were made of wood and had homemade attachments, but fiberglass reinforced plastic (FRP) tools were introduced in late 1950s and replaced essentially all wooden tools. In view of the long time span since the previous major innovation in LW tools, the EPRI advisory task force of the LW project requested that research be performed on new tools, materials, and ropes that could serve as substitutes for some of the ...

2013-12-14T23:59:59.000Z

416

Designing Industrial DSM Programs that Work  

E-Print Network (OSTI)

There are many reasons why industrial customers do not implement all cost-effective efficiency measures on their own. Utility demand side management (DSM) programs can help overcome some of these barriers. DSM programs provide an opportunity for utilities to reduce the cost of providing energy services while helping customers to reduce their energy bills and thereby increase profit margins and competitiveness. A review of utility experience with industrial DSM programs shows that some types of programs work much better than other types. Successful efforts include both custom and prescriptive components that show an understanding of the customers perspective, use marketing that is personal and user-friendly, provide flexibility, and include financial incentives. Among the less successful programs are programs that do not address customer needs, including information-only, loan, and shared savings programs. A number of other program approaches are largely untested and merit further experimentation. Based on these findings, we recommend that utilities and industrial customers work together to design DSM programs that serve the needs of industrial customers.

Nadel, S. M.; Jordan, J. A.

1994-04-01T23:59:59.000Z

417

Batteries and fuel cells working group report  

DOE Green Energy (OSTI)

Electrochemical energy systems are dominated by interfacial phenomena. Catalysis, corrosion, electrical and ionic contact, and wetting behavior are critical to the performance of fuel cells and batteries. Accordingly, development of processing techniques to control these surface properties is important to successful commercialization of advanced batteries and fuel cells. Many of the surface processing issues are specific to a particular electrochemical system. Therefore, the working group focused on systems that are of specific interest to DOE/Conservation and Renewable Energy. These systems addressed were: Polymer Electrolyte Membrane (PEM) Fuel Cells, Direct Methanol Oxidation (DMO) Fuel Cells, and Lithium/Polymer Batteries. The approach used by the working group for each of these systems was to follow the current path through the system and to identify the principal interfaces. The function of each interface was specified together with its desired properties. The degree to which surface properties limit performance in present systems was rated. Finally, the surface processing needs associated with the performance limiting interfaces were identified. This report summarizes this information.

Eberhardt, J. [USDOE Assistant Secretary for Conservation and Renewable Energy, Washington, DC (United States). Office of Advanced Transportation Materials; Landgrebe, A. [USDOE Assistant Secretary for Conservation and Renewable Energy, Washington, DC (United States). Electric and Hybrid Propulsion Systems; Lemons, R.; Wilson, M. [Los Alamos National Lab., NM (United States); MacAurther, D. [CHEMAC International Corp., (United States); Savenell, R. [Case Western Reserve Univ., Cleveland, OH (United States); Swathirajan, S. [General Motors Research Labs., Warren, MI (United States); Wilson, D. [Oak Ridge National Lab., TN (United States)

1991-12-31T23:59:59.000Z

418

Batteries and fuel cells working group report  

DOE Green Energy (OSTI)

Electrochemical energy systems are dominated by interfacial phenomena. Catalysis, corrosion, electrical and ionic contact, and wetting behavior are critical to the performance of fuel cells and batteries. Accordingly, development of processing techniques to control these surface properties is important to successful commercialization of advanced batteries and fuel cells. Many of the surface processing issues are specific to a particular electrochemical system. Therefore, the working group focused on systems that are of specific interest to DOE/Conservation and Renewable Energy. These systems addressed were: Polymer Electrolyte Membrane (PEM) Fuel Cells, Direct Methanol Oxidation (DMO) Fuel Cells, and Lithium/Polymer Batteries. The approach used by the working group for each of these systems was to follow the current path through the system and to identify the principal interfaces. The function of each interface was specified together with its desired properties. The degree to which surface properties limit performance in present systems was rated. Finally, the surface processing needs associated with the performance limiting interfaces were identified. This report summarizes this information.

Eberhardt, J. (USDOE Assistant Secretary for Conservation and Renewable Energy, Washington, DC (United States). Office of Advanced Transportation Materials); Landgrebe, A. (USDOE Assistant Secretary for Conservation and Renewable Energy, Washington, DC (United States). Electric and Hybrid Propulsion Systems); Lemons, R.; Wilson, M. (Los Alamos National Lab., NM (United States)); MacAurther, D. (CH

1991-01-01T23:59:59.000Z

419

TERMS OF REFERENCE FP2020 WORKING GROUP ON COUNTRY ENGAGEMENT A. PURPOSE OF WORKING GROUP  

E-Print Network (OSTI)

The London Summit on Family Planning brought together partners representing country governments, donors, multilateral agencies, civil society and private sector organisations around an ambitious goal: to provide an additional 120 million women in the worlds poorest countries with access to voluntary family planning by 2020. Developing country leaders and other partners made transformative financial, policy and delivery commitments and $2.6bn in donor financing was pledged to enable millions more girls and women to use family planning information, services and supplies. The commitments made at the Summit will support the right of women and girls around the world to decide, freely and for themselves, whether, when and how many children they have. The purpose of the FP2020 Country Engagement Working Group is to work with existing partners to provide additional support to countries as they develop, implement, and monitor progress against their transformational family planning plans, building on existing country plans wherever possible, and within the context of countries wider RMNCH and health sector plans. B. OBJECTIVES OF THE WORKING GROUP The Country Engagement Working Group, recognizes that there are partners on the ground working with governments and other partners in many areas within the TOR of the working group. The primary

unknown authors

2012-01-01T23:59:59.000Z

420

The Higgs Working Group: Summary report  

SciTech Connect

In this working group we have investigated the prospects for Higgs boson searches at the Tevatron and LHC and, in particular, the potential of these colliders to determine the Higgs properties once these particles have been found. The analyses were done in the framework of the Standard Model (SM) and its supersymmetric extensions as the minimal (MSSM) and next-to-minimal (NMSSM) supersymmetric extensions. The work for the discovery potential of the LHC mainly concentrated on the difficult regions of previous analyses as those which are plagued by invisible Higgs decays and Higgs decays into supersymmetric particles. Moreover, the additional signatures provided by the weak vector-boson fusion process (WBF) have been addressed and found to confirm the results of previous analyses. A major experimental effort has been put onto charged Higgs boson analyses. The final outcome was a significant improvement of the discovery potential at the Tevatron and LHC than previous analyses suggested. For an accurate determination of Higgs boson couplings, the theoretical predictions for the signal and background processes have to be improved. A lot of progress has been made during and after this workshop for the gluon-fusion gg {yields} H + (0, 1, 2jets) and the associated t{bar t}H production process. A thorough study of the present theoretical uncertainties of signal and background processes has been initialized, culminating in a list of open theoretical problems. A problem of major experimental interest is the proper treatment of processes involving bottom quark densities, which is crucial for some important signal and background processes. Further theoretical improvements have been achieved for the MSSM Higgs boson masses and Higgs bosons in the NMSSM. This report summarizes our work. The first part deals with theoretical developments for the signal and background processes. The second part gives an overview of the present status of Higgs boson searches at the Tevatron. The third part analyzes invisible Higgs boson decays at the LHC and the forth part the Higgs boson search in the WBF channel. Part 5 summarizes the progress that has been achieved for A/H {yields} {tau}{sup +}{tau}{sup -}. decays in the MSSM. In part 6 the status of the Higgs boson search in t{bar t}H production is presented. Finally, part 7 describes the charged Higgs boson analyses in detail.

D. Cavalli et al.

2004-03-18T23:59:59.000Z

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

The Effects of Structured Work Experience on the Work-Readiness Skills of Students with Disabilities  

E-Print Network (OSTI)

It is common knowledge that employment is a large part of participation in society for all adults; and, one role of public education is to prepare students for these adult roles. Despite increasing school accountability measures for post-school outcomes of students with disabilities, a significant gap in employment between those with and those without disabilities remains. Work experience during high school has been established as the most consistent predictor of post-school employment. The problem is the lack of intervention research demonstrating ways of implementing programs that are associated with acquisition of work-readiness skills. The purpose of this study was to investigate the effects of structured work experience on the work-readiness skills of students with disabilities, and examine whether or not disability, or type of program, affected student outcomes while controlling for number of participant contact hours. To accomplish this purpose, a quasi- experimental one-group pretest-posttest design was selected and used. The target population for this study was high school students with disabilities in three high schools in Texas. The final sample included 37 students. The Becker Work Adjustment Profile: 2 was the instrument used to measure the participants work-readiness skills. The pretest was administered within two weeks of student entry into the program. The posttest was administered within two weeks of student exit from the program. Descriptive and inferential analyses were conducted to answer the primary and exploratory research questions. Inferential analyses included a dependent sample t test and an ANCOVA using number of participant contact hours as the covariate. Results indicated participation in a structured work experience program had a positive effect on the work-readiness skills of these participants. ANCOVA results indicated (a) disability type was not a significant factor affecting the work-readiness of the participants, (b) program type produced a statistically significant main effect, (c) there was no statistically significant interaction effect between disability type and program type, and (d) number of contact hours produced a statistically significant main effect. Future research studies should focus on replication of the current study results and examination of the long-term effects of participation in structured work experience programs on post-school outcomes.

Pacha, Jacqueline K

2013-05-01T23:59:59.000Z

422

A Marriage of Hardware and Hard Work  

NLE Websites -- All DOE Office Websites (Extended Search)

Shaken but Not Stirred Shaken but Not Stirred 2008 Rosalind Franklin Young Investigator Award The 2008 3-Way Meeting In R&D, Super X-rays Mark Many Spots A New Gas Loading System for Diamond Anvil Cells at GSECARS APS News Archives: 2012 | 2011 | 2010 | 2009 2008 | 2007 | 2006 | 2005 2004 | 2003 | 2002 | 2001 2000 Subscribe to APS News rss feed A Marriage of Hardware and Hard Work MAY 5, 2008 Bookmark and Share The first assembled production girder for the LCLS sits atop the coordinate measuring machine. From "SLAC Today," http://today.slac.stanford.edu/ The first undulator support girder assembly for the Linac Coherent Light Source (LCLS) at the Stanford Linear Accelerator Center (SLAC) made its way from the Collider Hall, where technicians are piecing them together, to the

423

Energy Cost Control: How the Money Works  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Russell Russell Energy PathFINDER www.energypathfinder.com crussell@energypathfinder.com Energy Cost Control: How the Money Works (Copies of these slides to be provided by DOE-ITP) (c)2009 Energy Pathfinder Mangement Consulting, LLC www.energypathfinder.com 2 Samuel Goldwyn (1879-1974) "Spare no expense to save money on this one." (c)2009 Energy Pathfinder Mangement Consulting, LLC www.energypathfinder.com 3 OUTLINE A "money" perspective on energy Projects, payback Make-or-buy Annualized cost analysis Cost of doing nothing Break-even analysis Budget for additional analysis (c)2009 Energy Pathfinder Mangement Consulting, LLC www.energypathfinder.com 4 A print-on-demand publication www.lulu.com/content/2152882 About Christopher Russell

424

DOE Hydrogen Pipeline Working Group Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Pipeline Pipeline Working Group Workshop August 31, 2005 Augusta, Georgia Hydrogen Pipeline Experience Presented By: LeRoy H. Remp Lead Project Manager Pipeline Projects ppt00 3 Hydrogen Pipeline - Scope of Presentation Only those systems that are regulated by DOT in the US, DOT delegated state agency, or other federal regulatory authority. Cross property of third party and/or public properties for delivery to customers. Does not include in-plant or in-house hydrogen piping. Does not include piping (aboveground or underground) that delivers to a customer if all property is owned and controlled by Air Products and the customer. ppt00 4 Pipeline Photos ppt00 5 Pipeline Photos ppt00 6 Pipeline Photos ppt00 7 Pipeline Photos ppt00 8 Pipeline Photos ppt00 9 Overview of North American

425

USDOE Technology Transfer, Working with DOE  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency & Renewable and Energy - Commercialization Energy Efficiency & Renewable and Energy - Commercialization Deployment SBIR/STTR - Small Business Innovation Research and Small Business Technology Transfer Advanced Research Projects Agency-Energy (ARPA-E) Oil & Gas Technology Transfer Initiatives USEFUL LINKS Contract Opportunities: FBO.gov FedConnect.net Grant Opportunities DOE Organization Chart Association of University Technology Managers (AUTM) Federal Laboratory Consortium (FLC) Feedback Contact us about Tech Transfer: Mary.McManmon@science.doe.gov Mary McManmon, 202-586-3509 Working with DOE Navigate Home About Us Contact Information Hide Thumbs First Previous Pause Next Last Set Speed Slideshow speed: 5 seconds Move Decontamination New Image Set Autoinduction Autoinduction System The award winning Overnight Express(tm) Autoinduction System developed at

426

2012 Fuel Cycle MPACT Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Site Site Hydrogen Research Center 301 Gateway Drive Aiken, SC 29803 Accommodations Country Inn & Suites Aiken 3270 Whiskey Road Aiken, SC 29803 (803) 649-4024 RESERVATIONS: The cut-off date for guest room block reservations is Wednesday, February 22, 2012. We have a block of rooms reserved at this hotel at the government per diem rate of $86.00 per night. Please reference DOE -NE Fuel Cycle MPACT Working Group Meeting when making your reservations to the get the government rate. Reservations will be by individual call-in, per your institutional protocol. Here is a listing of other hotels that offer government room rates. Please note that we do not have rooms reserved at the list locations, only Country Inn & Suites in Aiken. Maps Maps to SRNL from Columbia, Aiken, and Augusta

427

Tankless Water Heaters: Do They Really Work?  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tankless Water Heaters: Do They Tankless Water Heaters: Do They Really Work? Center for Energy and Environment, NorthernSTAR, Ben Schoenbauer Context * Domestic Water Heating is the next big residential energy in efficiency. - Space heating loads are being reduced - Largest peak load in almost all homes is water heating - Annual water heating load is larger than annual space heating load in many homes - Most DHW equipment is inefficiency 50-60% Technical Approach * TWHs and condensing TWHs have significant energy savings potential - Do these ratings relate to real world performance? - How do TWHs compare to standard water heaters? - What performance/install issues do they have? * 10 home 26 water heater alternating mode field study was conducted Recommended Guidance * In situations where economics are

428

Why.Nov.work3.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

Los Alamos National Laboratory Advancing National Security Through Scientifi c Inquiry scientists poke and prod the Red Planet November 2011 In this Issue Seeking solutions to global energy problems | pg. 14 LANL is operated by Los Alamos National Security, LLC for the U.S. Department of Energy's National Nuclear Security Administration About this issue We've reached the one-year mark for Why magazine-one full trip around the Sun. This issue takes us to other parts of the solar system. Our cover story highlights the science- and collaboration-behind preparing a mobile laboratory for a Mars reconnaissance mission. Meanwhile, on another side of the Lab, Los Alamos researchers work on solutions to some of planet Earth's greatest energy concerns-applying cutting-edge

429

End-of-Month Working Gas in  

Gasoline and Diesel Fuel Update (EIA)

5 5 Notes: The level of gas in storage at the end of the last heating season (March 31, 2000) was 1,150 billion cubic feet (Bcf), just above the 1995-1999 average of 1,139 Bcf. However, according to American Gas Association data, injection rates since April 1 have been below average, resulting in a 10-percent shortfall compared to the 5-year average for total stocks as of September 1. Net injections in August have been 10 percent below average. If net injections continue at 10 percent below historically average rates through the remainder of the refill season, gas inventories would be 2,750 Bcf on November 1, which is 8 percent below the 5-year average of about 3,000 Bcf. We are currently projecting that working gas will be between 2,800 and 2,900 Bcf at the end of October, entering the heating season

430

Microsoft Word - tchr_work_info.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

Number of teachers: Number of teachers: 3. Number of years teacher can participate: 4. Nature of academic year follow-up: 5. Remuneration received by teachers: 6. Major content focus of teacher work projects: Facility Characteristics 1. Special facilities: 2. Unique capabilities or attributes: 3. Core science mathematics, and technological competencies (e.g., applied and basic technologies, integration activities, product realization): Teacher Characteristics* 1. Education in scientific/technical discipline (major degrees): 2. Gender 3. Race, ethnicity 4. Years of teaching experience 5. Research Experience 6. Computer knowledge/experience 7. Courses currently teaching 8. Student ability level 9. Community type (urban/suburban/rural) 10. Community wealth (High/middle/low SES)

431

Bachelor of Arts in Social Work Degree (BASW) Program  

E-Print Network (OSTI)

Bachelor of Arts in Social Work Degree (BASW) Program e School of Social Work offers a Bachelor of Arts degree with a major in Social Work. is new BASW program is the only baccalaureate social work program in the Oregon University System. e Portland State University's School of Social Work is excited

432

THE HIGGS WORKING GROUP: SUMMARY REPORT.  

SciTech Connect

This working group has investigated Higgs boson searches at the Tevatron and the LHC. Once Higgs bosons are found their properties have to be determined. The prospects of Higgs coupling measurements at the LHC and a high-energy linear e{sup +}e{sup -} collider are discussed in detail within the Standard Model and its minimal supersymmetric extension (MSSM). Recent improvements in the theoretical knowledge of the signal and background processes are presented and taken into account. The residual uncertainties are analyzed in detail. Theoretical progress is discussed in particular for the gluon-fusion processes gg {yields} H(+j), Higgs-bremsstrahlung off bottom quarks and the weak vector-boson-fusion (VBF) processes. Following the list of open questions of the last Les Houches workshop in 2001 several background processes have been calculated at next-to-leading order, resulting in a significant reduction of the theoretical uncertainties. Further improvements have been achieved for the Higgs sectors of the MSSM and NMSSM. This report summarizes our work performed before and after the workshop in Les Houches. Part A describes the theoretical developments for signal and background processes. Part B presents recent progress in Higgs boson searches at the Tevatron collider. Part C addresses the determination of Higgs boson couplings, part D the measurement of tan {beta} and part E Higgs boson searches in the VBF processes at the LHC. Part F summarizes Higgs searches in supersymmetric Higgs decays, part G photonic Higgs decays in Higgs-strahlung processes at the LHC, while part H concentrates on MSSM Higgs bosons in the intense-coupling regime at the LHC. Part I presents progress in charged Higgs studies and part J the Higgs discovery potential in the NMSSM at the LHC. The last part K describes Higgs coupling measurements at a 1 TeV linear e{sup +}e{sup -} collider.

DAWSON, S.; ET AL.

2005-08-01T23:59:59.000Z

433

U.S. CMS - U.S. CMS @ Work - Working at CERN - Relocating to CERN -  

NLE Websites -- All DOE Office Websites (Extended Search)

Working at CERN Working at CERN Mandate Life in Geneva Map to P5 Computers Search People Relocation Visa: Long Term Invitation: Long Term Visa: Short Term Invitation: Short Term Invitation: Long Term For the long term French and Swiss invitations, the following information is needed: *Gender: (male/female) Work address: (including street address for Federal Express) *Home address: *Citizenship: *Place of birth (City and country): *Date of birth: *Passport number: *Date of passport issue: *Date of passport expiration: Professional title: Address of employing institute: Dates of visit to CERN: Email address: Your phone number: Your fax number: The fax numbers of the Swiss and French consulates where you will apply for the visas: *We also need this information for any family members traveling with you...

434

Property Libraries for Working Fluids for Calculating Heat ...  

Science Conference Proceedings (OSTI)

... properties of working fluids can be used for the daily work of an engineer who calculates heat cycles, steam or gas turbines, boilers, heat pumps or ...

2006-07-20T23:59:59.000Z

435

Environment/Health/Safety/Security (EHSS): Stop Work Policy  

NLE Websites -- All DOE Office Websites (Extended Search)

Stop Work Policy stop All Berkeley Lab employees, contractors, and participating guests are responsible for stopping work activities that are considered to be an imminent danger....

436

Statement: Committee on Environment and Public Works United States...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Statement: Committee on Environment and Public Works United States Senate Statement: Committee on Environment and Public Works United States Senate Senate Testimony Committee on...

437

CRAD, Work Controls Assessment Plan | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Work Controls Assessment Plan Work Controls Assessment Plan CRAD, Work Controls Assessment Plan Performance Objective: Management should have an established work control process in place with authorized, controlled and documented methods that provide an accurate status of the work to be performed. Criteria: Work planning addresses applicable laws, codes and regulations. Work planning includes operational configuration constraints; material, tool, and manpower requirements; inter-organizational coordination; operational history; special training; safety considerations; hazards protection requirements; post-maintenance testing; quality control requirements; and other considerations as necessary. The work to be accomplished is defined by identifying the existing deficiency and condition; prescribing appropriate approvals; and including

438

DOE O 412.1A, Work Authorization System  

Directives, Delegations, and Requirements

To establish a work authorization and control process for work performed by designated site and facility management contractors, and other contractors as ...

2005-04-21T23:59:59.000Z

439

Does the Air-Conditioning Engineering Rubric Work in Residences...  

NLE Websites -- All DOE Office Websites (Extended Search)

Does the Air-Conditioning Engineering Rubric Work in Residences? Title Does the Air-Conditioning Engineering Rubric Work in Residences? Publication Type Conference Paper LBNL...

440

EM QA Working Group September 2011 Meeting Materials | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PowerPoint presentations and reference material used in the EM QA Working Group video conference meeting held in September 2011. EM QA Working Group September 2011 Meeting...

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Climate VISION: Private Sector Initiatives: Magnesium: Work Plans  

Office of Scientific and Technical Information (OSTI)

Work Plans EPA's SF6 Emission Reduction Partnership for the Magnesium Industry in cooperation with the International Magnesium Association has developed a work plan for achieving...

442

Work Control Process, 3/9/95 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Work Control Process, 3995 Work Control Process, 3995 The objective of this surveillance guide is to provide lines of inquiry for evaluating the effectiveness of the...

443

Fuel Cell Technologies Office: Hydrogen Pipeline Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

- Energy Efficiency and Renewable Energy Fuel Cell Technologies Office Hydrogen Pipeline Working Group The Hydrogen Pipeline Working Group of research and industry experts...

444

Fuel Cell Technologies Office: 2005 Hydrogen Pipeline Working...  

NLE Websites -- All DOE Office Websites (Extended Search)

- Energy Efficiency and Renewable Energy Fuel Cell Technologies Office 2005 Hydrogen Pipeline Working Group Workshop DOE held a Hydrogen Pipeline Working Group Workshop August...

445

Training Work Group Status Overview - July 2012 | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Work Group Status Overview - July 2012 Training Work Group Status Overview - July 2012 Documents Available for Download July 2012 Status Overviews More Documents &...

446

Training Work Group Status Overview - September 2012 | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

September 2012 Training Work Group Status Overview - September 2012 Documents Available for Download September 2012 Status Overviews More Documents & Publications Training Work...

447

Training Work Group Status Overview - July 2012 | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

July 2012 Training Work Group Status Overview - July 2012 Documents Available for Download July 2012 Status Overviews More Documents & Publications Training Work Group Status...

448

Climate VISION: Private Sector Initiatives: Oil and Gas: Work...  

Office of Scientific and Technical Information (OSTI)

Work Plans API has developed a work plan based on API's commitment letter and the Climate Challenge Program which addresses the overall elements of the Climate VISION program...

449

TEC Working Group Topic Groups Rail Conference Call Summaries...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TRAGIS Subgroup TEC Working Group Topic Groups Rail Conference Call Summaries TRAGIS Subgroup TRAGIS Subgroup April 11, 2006 More Documents & Publications TEC Working Group Topic...

450

DOE - Office of Legacy Management -- Hanford Engineer Works ...  

NLE Websites -- All DOE Office Websites (Extended Search)

Hanford Engineer Works - WA 01 FUSRAP Considered Sites Site: Hanford Engineer Works (WA.01 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site...

451

Interagency Advanced Power Group, Solar Working Group: Meeting minutes  

SciTech Connect

This report is the minutes of the Solar Working group. The meeting was prompted by the Steering Group`s desire to resolve issues the Solar Working Group.

Not Available

1993-10-14T23:59:59.000Z

452

DOE Field Procurement Offices Where EM Work is Performed | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program Management Acquisition DOE Field Procurement Offices Where EM Work is Performed DOE Field Procurement Offices Where EM Work is Performed The following is a list of...

453

Working crude oil storage capacity at Cushing, Oklahoma rises ...  

U.S. Energy Information Administration (EIA)

Greenhouse gas data, ... as reported in EIA's recently released report on Working and Net Available Shell Storage Capacity. Utilization of working storage capacity ...

454

University of Central Florida Students' Energy Saving Work Showcased...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Central Florida Students' Energy Saving Work Showcased in New Department of Energy Video University of Central Florida Students' Energy Saving Work Showcased in New Department of...

455

Legacy Management Work Progresses on Defense-Related Uranium...  

NLE Websites -- All DOE Office Websites (Extended Search)

Legacy Management Work Progresses on Defense-Related Uranium Mines Report to Congress Legacy Management Work Progresses on Defense-Related Uranium Mines Report to Congress October...

456

TEC Working Group Topic Groups Rail Key Documents Radiation Monitoring...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Radiation Monitoring Subgroup TEC Working Group Topic Groups Rail Key Documents Radiation Monitoring Subgroup Radiation Monitoring Subgroup Draft Work Plan - February 4, 2008 More...

457

NSLS Committees | Work Planning/Permit Review Committee  

NLE Websites -- All DOE Office Websites (Extended Search)

require enhanced work planning. Committees review and approve submitted work permits. NSLS reports to Operations Section Head, Emil Zitvogel. NSLS-II reports to ESH Manager,...

458

US - Brazil Binational Energy Working Group Joint Action Plan...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

US - Brazil Binational Energy Working Group Joint Action Plan US - Brazil Binational Energy Working Group Joint Action Plan brazilactionplan7202010.pdf More Documents &...

459

Oak Ridge Environmental Management Program Completes Work at...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Ridge Environmental Management Program Completes Work at Bethel Valley Burial Grounds Oak Ridge Environmental Management Program Completes Work at Bethel Valley Burial Grounds...

460

Beyond 'Work First': An Empowering Approach to Welfare Programs  

E-Print Network (OSTI)

Discourse, Resistance, and AFDC Workfare Programs. SocialWorks: The Working Lives of AFDC Recipients. Washington, DC:Welcomed Any Reform after AFDC Chapter 2: From Repressive to

Woodward, Kerry C.

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Alaska Natural Gas in Underground Storage (Working Gas) (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

9302013 Next Release Date: 10312013 Referring Pages: Underground Working Natural Gas in Storage - All Operators Alaska Underground Natural Gas Storage - All Operators Working...

462

Quantum cryptography put to work for electric grid security  

NLE Websites -- All DOE Office Websites (Extended Search)

Quantum cryptography put to work Quantum cryptography put to work for electric grid security LANL's quantum cryptography team successfully completed the first-ever demonstration of...

463

Indiana Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Indiana Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

464

Wyoming Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Wyoming Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

465

Louisiana Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Louisiana Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

466

Virginia Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Virginia Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

467

New Mexico Working Natural Gas Underground Storage Capacity ...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) New Mexico Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

468

Illinois Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Illinois Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

469

New York Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) New York Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

470

Maryland Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Maryland Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

471

Oklahoma Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Oklahoma Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

472

Alabama Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Alabama Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

473

Kansas Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Kansas Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

474

Utah Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Utah Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3...

475

Missouri Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Missouri Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

476

Oregon Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Oregon Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

477

Colorado Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Colorado Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

478

Montana Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Montana Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

479

Minnesota Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Minnesota Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

480

Arkansas Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Arkansas Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

Note: This page contains sample records for the topic "1943-1944 working k-25" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Iowa Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Iowa Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3...

482

Nebraska Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Nebraska Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

483

Texas Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Texas Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3...

484

Kentucky Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Kentucky Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

485

Michigan Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Michigan Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2...

486

Ohio Working Natural Gas Underground Storage Capacity (Million...  

U.S. Energy Information Administration (EIA) Indexed Site

Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Ohio Working Natural Gas Underground Storage Capacity (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3...

487

HSS Work Group Telecom (Draft Charters) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Meeting SummaryActionsParticipants Draft Proposed Charter Template Draft Work Group Matrix Draft Work Group Guidance More Documents & Publications HSS Focus Group Meeting...

488

Making the audit work for you  

SciTech Connect

These slides presented at an Environmental Auditing Conference, focus on one aspect of environmental auditing: its important role in the even broader practice of Environmental Management. The use of audits by the Department of Energy will be examined within the context of sound environmental management to illustrate the delicate practice of Making the Audit Work for You.'' A summary of the main points to be covered follows. (1) Brief description of DOE Environmental Audit process; disciplines covered, DOE Orders reviewed, management/operations evaluated. (2) Brief discussion of DOE/Secretary Watkin's Tiger Team initiative as the cornerstone of his plan to strengthen the Department's Environment, Safety, and Health (ESH) programs. (3) Examples given of the types of findings presented in each of these areas, along with brief examples of root causes, lessons learned, trends, and noteworthy practices. (4) Discussion of the relationships between environmental audits, safety and health assessments, and management and organization assessments. (5) Discussion of Environmental Auditing/Assessment and its recurring role in the Environmental Management continuum. (6) DOE is cited as an example of an organization that uses audits as a powerful environmental management tool to help achieve its objectives and multiple goals.

Wilczynski, E.J.

1991-10-01T23:59:59.000Z

489

MEMORANDUM TO: SPSC DSM WORK GROUP PARTICIPANTS  

E-Print Network (OSTI)

SPSCs 20-year High DSM/DG study case is intended to be based on a load forecast that reflects significantly higher energy efficiency levels than in the reference case. LBNL and Itron have developed a preliminary SPSC High DSM load forecast using Itrons statistically adjusted enduse (SAE) load forecasting framework, which allows the specification of end use efficiency levels for 30 individual residential and commercial end-use categories. The stock efficiency levels selected for the High DSM/DG case are intended to represent the highest efficiency levels that are commercially available today. Accompanying this memorandum are two Excel workbooks containing the residential and commercial stock efficiency assumptions proposed for the High DSM case. We are seeking feedback from SPSC DSM Work Group participants on whether the stock efficiency assumptions in those workbooks are appropriate (i.e., reflective of the highest efficiency levels commercially available today). Please focus your attention, in particular, on the information contained in Columns F and H in each of the state-labeled worksheets, which identify the proposed average stock efficiency levels for the High DSM case and the corresponding energy savings relative to

unknown authors

2012-01-01T23:59:59.000Z

490

Report on all ARRA Funded Technical Work  

DOE Green Energy (OSTI)

The main focus of this American Recovery and Reinvestment Act of 2009 (ARRA) funded project was to design an energy efficient carbon capture and storage (CCS) process using the Recipient?s membrane system for H{sub 2} separation and CO{sub 2} capture. In the ARRA-funded project, the Recipient accelerated development and scale-up of ongoing hydrogen membrane technology research and development (R&D). Specifically, this project focused on accelerating the current R&D work scope of the base program-funded project, involving lab scale tests, detail design of a 250 lb/day H{sub 2} process development unit (PDU), and scale-up of membrane tube and coating manufacturing. This project scope included the site selection and a Front End Engineering Design (FEED) study of a nominally 4 to 10 ton-per-day (TPD) Pre-Commercial Module (PCM) hydrogen separation membrane system. Process models and techno-economic analysis were updated to include studies on integration of this technology into an Integrated Gasification Combined Cycle (IGCC) power generation system with CCS.

None

2013-10-05T23:59:59.000Z

491

Working with 36 CFR Part 79  

SciTech Connect

In anticipation of the new federal curation regulation, staff at Los Alamos National Laboratory (LANL) have begun a curation program which complies with the proposed law. Cultural resources include archaeological sites dating from Archaic to Classic Period Anasazi as well as historical Homesteading and WWII (Manhattan Project) era sites. Recent curation work has included the identification of Department of Energy (DOE) owned archaeological and historical artifact collections and inspections of their various repositories have also been started. During the winter of 1989 all human skeletal remains excavated from DOE/LANL land (from 1943 to present) were located and inventoried. At present, all such sensitive materials are curated with the Museum of New Mexico and the Maxwell Museum of Anthropology's Osteology Laboratory at the University of New Mexico. This paper discusses problems and issues that have arisen for the LANL curation program. These include artifact ownership, inadequate archival records, repository acquisition of federally-owned collections, evaluation of repositories, evaluation of artifact condition and curation plans for the future.

McGehee, E.D.

1990-01-01T23:59:59.000Z

492

International Technical Working Group Round Robin Tests  

SciTech Connect

The goal of nuclear forensics is to develop a preferred approach to support illicit trafficking investigations. This approach must be widely understood and accepted as credible. The principal objectives of the Round Robin Tests are to prioritize forensic techniques and methods, evaluate attribution capabilities, and examine the utility of database. The HEU (Highly Enriched Uranium) Round Robin, and previous Plutonium Round Robin, have made tremendous contributions to fulfilling these goals through a collaborative learning experience that resulted from the outstanding efforts of the nine participating internal laboratories. A prioritized list of techniques and methods has been developed based on this exercise. Current work is focused on the extent to which the techniques and methods can be generalized. The HEU Round Robin demonstrated a rather high level of capability to determine the important characteristics of the materials and processes using analytical methods. When this capability is combined with the appropriate knowledge/database, it results in a significant capability to attribute the source of the materials to a specific process or facility. A number of shortfalls were also identified in the current capabilities including procedures for non-nuclear forensics and the lack of a comprehensive network of data/knowledge bases. The results of the Round Robin will be used to develop guidelines or a ''recommended protocol'' to be made available to the interested authorities and countries to use in real cases.

Dudder, Gordon B.; Hanlen, Richard C.; Herbillion, Georges M.

2003-02-01T23:59:59.000Z

493

J.2 ATTACHMENT A- STATEMENT OF WORK A. SCOPE OF WORK STATEMENT OF WORK Specification for North American SynchroPhasor Initiative (NASPI)  

E-Print Network (OSTI)

The scope of work is limited to the contractor developing, and delivering a specification for a NASPI network

unknown authors

2008-01-01T23:59:59.000Z

494

ADDITIONAL TERMS AND CONDITIONS FOR NRC WORK Additional Terms and Conditions for NRC Work -March 2012  

E-Print Network (OSTI)

, the NRC may direct the Laboratory/DOE to not publish the work as a NUREG/CR, but publish as a Laboratory shall follow general guidance provided in NUREG/BR-0167, "Software Quality Assurance Program with the designation NUREG/IA-XXXX for international agreement reports or NUREG/CR-XXXX for contractor reports. Details

495

WORKING PAPER SERIES MIT-IPC-Energy Innovation Working Paper 09-003  

E-Print Network (OSTI)

energy resources they use ­ oil, coal, natural gas, nuclear, hydro power, geothermal, wind, solar% Nuclear 0% Hydro (conventional) 0% Renewable energies 0% Source: Lawrence Livermore National Laboratory, UWORKING PAPER SERIES MIT-IPC-Energy Innovation Working Paper 09-003 [also MIT-IPC-09-002] 292 Main

496

Director of Consolidated Public Works Recording Secretary  

E-Print Network (OSTI)

A three-member board to exercise authority over the planning and design of streets, including the alignment and grade of the street and also the drainage of the contiguous areas. 1910 Board of Survey establishes specifications for street layouts. 1913 Five member Planning Board formed to make studies of resource possibilities and needs of the city. 1914 Membership of Planning Board resigns. 1915 Planning Board reconstructed with five new members. 1921 By City Council Ordinance, the Board of Survey is combined with the Planning Board to form the Board of Survey and Planning consisting of three members and a clerk. The Clerk is to be a city engineer. 1923 By an act of the State Legislature, the Board of Survey is combined with the Planning Board to form the Board of Survey and Planning with a five-member board. The first task is to zone the City. 1924 Board of Survey and Planning officially organized on February 12, 1924. 1933 Board of Survey and Planning voted to recommend to the Slate Department of Public Works that Route 128 be built between Bear Hill and Prospect Hill. 1934 Overpass at Beaver Brook and Main Street Railroad crossing planned by the Board of Survey and Planning. 1946 By City Ordinance, no development shall be accepted unless the developer provides sewer and drainage. 1950 Board of Survey and Planning studies new zoning for the City. 1953 By City Ordinance, all new subdivisions will be required to have water mains and services installed by the developer in its entirety.

S. Anthony Devito; Priscilla Lane; John Tashjian; Janice E. Deveney

1997-01-01T23:59:59.000Z

497

DOE O 481.1C Admin Chg 1, Work for Others (Non-Department of Energy Funded Work)  

Directives, Delegations, and Requirements

Work for Others is the performance of work for non-Department of Energy (DOE) entities by DOE/National Nuclear Security Administration (NNSA) and/or their ...

2005-01-24T23:59:59.000Z

498

Individual Virtual Competence and Its Influence on Work Outcomes  

Science Conference Proceedings (OSTI)

Witnessing both opportunities and challenges in virtual work arrangements, researchers have explored a number of technological, social, and organizational factors in order to improve virtual work effectiveness. However, there is limited understanding ... Keywords: Individual Virtual Competence, Individual Work Outcomes, Virtual Organization, Virtual Work

Yinglei Wang; Nicole Haggerty

2011-04-01T23:59:59.000Z

499

Liquid effluents program FY 1997 multi-year work plan  

Science Conference Proceedings (OSTI)

This document provides the technical baseline and work breakdown structure for the liquid effluents program.

Green, F.T.

1996-09-30T23:59:59.000Z

500

BIOS working paper no: 4 The Transnational Governance  

E-Print Network (OSTI)

companies such as LS9, Amyris, OPX Biotechnologies, Solazyme, Gevo and Synthetic Genomics are working