Powered by Deep Web Technologies
Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Microsoft Word - Management Control Cover 08-02.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Contract Transition Activities at Contract Transition Activities at the Nevada Test Site OAS-M-08-02 November 2007 DOE F 1325.8 (08-93) United States Government Department of Energy memorandum DATE: November 26,2007 Audit Report No: OAS-M-08-02 REPLY TO ATTN OF: IG-32 (A06LV045) SUBJECT: Audit of "Contract Transition Activities at the Nevada Test Site" TO: Deputy Administrator for Defense Programs, National Nuclear Security Administration INTRODUCTION AND OBJECTIVE The Nevada Test Site (Test Site) is a unique combination of Federally-owned land and facilities located in a remote area approximately 65 miles northwest of Las Vegas, Nevada. The Test Site represents the United States' unique capability to support nuclear testing and complex dynamic experiments that involve nuclear and

2

OMB Control No.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

300.3 300.3 (09-93) (All other editions are obsolete) OMB Control No. 1910-0500 OMB Burden Disclosure Statement on Page 4 U.S. Department of Energy Semi-Annual Summary Report of DOE-Owned Plant and Capital Equipment (P&CE) Contractor Name Address Location of Property (City, State) Contracting Office Contract No. Asset Type Code Beginning Balance As of No. of Items $ Acquisitions No. of Items $ Dispositions No. of Items $ Ending Balance As of No. of Items $ Total Plant and Capital Equipment 1 2 3 4 5 6 7 8 9 Prepared By name (printed), title, telephone number, signature Date of Last Physical Inventory of Capital Equipment Contracting Officer Representative Signature

3

OMB Control No.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3A 3A (03-94) OMB Control No. 1910-0400 Public reporting burden for this collection of information is estimated to average 10 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Office of Information Resources Management Policy, Plans, and Oversight, Records Management Division, HR-422 - GTN, Paperwork Reduction Project (1910-0400), U.S. Department of Energy, 1000 Independence Avenue, S.W., Washington, DC 20585; and to the Office of Management and Budget (OMB), Paperwork

4

OMB Control No.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7 7 (02-94) OMB Control No. 1910-0600 U.S. Department of Energy APPLICANT DISABILITY, RACE/NATIONAL ORIGIN AND SEX IDENTIFICATION (Please read the Instructions and Privacy Act Statement before completing this form) Vacancy Announcement Number Name (Last, First, Middle Initial) Position Title, Series, Grade Social Security Number Sex Male Female OMB Burden Disclosure Statement Public reporting burden for this collection of information is estimated to average 10 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including

5

Replaces EIA-459E OMB Control No.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5 5 (04-94) Replaces EIA-459E OMB Control No. 1910-0400 U.S. DEPARTMENT OF ENERGY FEDERAL ASSISTANCE MANAGEMENT SUMMARY REPORT Page of Public reporting burden for this collection of information is estimated to average 3.38 hours per response, including the time for reviewing instructions, search- ing existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Office of Information Resources Management Policy, Plans, and Oversight, Records Management Division, HR-422 - GTN, Paperwork Reduction Project (1910-0400), U.S. Department of Energy, 1000 Independence Avenue, S.W., Washington, DC 20585; and to the Office of Management and Budget (OMB), Paperwork Reduction Project

6

Notices OMB Control Number: 1850-0803.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

870 Federal Register 870 Federal Register / Vol. 78, No. 140 / Monday, July 22, 2013 / Notices OMB Control Number: 1850-0803. Type of Review: Extension without change of an existing collection of information. Respondents/Affected Public: Individuals or households. Total Estimated Number of Annual Responses: 135,000. Total Estimated Number of Annual Burden Hours: 27,000. Abstract: This is a request for a 3-year renewal of the generic clearance to allow the National Center for Education Statistics (NCES) to continue to develop, test, and improve its survey and assessment instruments and methodologies. The procedures utilized to this effect include but are not limited to experiments with levels of incentives for various types of survey operations, focus groups, cognitive laboratory

7

Audit Letter Report: OAS-L-08-02 | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

08-02 08-02 Audit Letter Report: OAS-L-08-02 November 28, 2007 Department's Implementation of the Strategic Integrated Procurement Enterprise System - Overall Project Planning On September 28, 2007, we issued a report on the Department's Implementation of the Strategic Integrated Procurement Enterprise System - Transition Planning, Interfaces, and Testing (OAS-L-07-26). This was the first in a series of reports to address the Department of Energy's (Department) initiative and to determine whether ongoing efforts in the areas of transition planning, interfaces, and testing; overall project planning; and security were satisfying Federal and Department system development requirements, goals, and mission needs. Audit Letter Report: OAS-L-08-02 More Documents & Publications

8

Enforcement Letter -Rocky Flats-08/02/2000  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 2000 , 2000 Mr. Robert G. Card [ ] Kaiser-Hill Company, L.L.C. Rocky Flats Environmental Technology Site 10808 Highway 93, Unit B Golden, CO 80403-8200 Subject: Enforcement Letter Dear Mr. Card: This letter refers to the Department of Energy's (DOE) evaluation of potential noncompliances with the requirements of 10 CFR 830.120 (Quality Assurance Rule). The potential noncompliances involved inadequate implementation of work controls, specifically failure to perform required combustible gas surveillances. The failure to fully perform the required surveillances was identified by the contractor during a comprehensive Kaiser-Hill (KHLL) Implementation Validation Review (IVR) team verifying implementation of the Basis of Interim Operation (BIO) for Buildings 776 and

9

All Other Editions Are Obsolete OMB Control No.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

(10/92) All Other Editions Are Obsolete OMB Control No. 1910-1800 OMB Burden Disclosure Statement below U.S. Department of Energy (Facility or Installation Where Terminated) SECURITY TERMINATION STATEMENT NAME AND TITLE (Print all blocks) EMPLOYER YOU ARE LEAVING FUTURE RESIDENCE NAME AND ADDRESS OF FUTURE EMPLOYER REASON FOR TERMINATION SOCIAL SECURITY NUMBER DATE OF BIRTH DATE OF TERMINATION DOE NUMBER (IF KNOWN) I make the following statement in connection with the forthcoming termination of my access authorization (security clearance) granted by the U.S. Department of Energy (DOE). 1. In accordance with DOE security regulations, I have destroyed or transferred to persons designated

10

All Other Editions Are Obsolete OMB Control No.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5.9 5.9 (06-97) All Other Editions Are Obsolete OMB Control No. 1910-1800 OMB Burden Disclosure Statement on Reverse U.S. DEPARTMENT OF ENERGY RECORD OF DESTRUCTION See DOE Manual 471.2-1 Manual for Classified Matter Protection and Control for Instructions UNCLASSIFIED DESCRIPTION OF MATTER (Subject or title and originator) UNIQUE IDENTIFICATION NUMBER (If none, omit) DATE OF MATTER CLASSIFICATION LEVEL AND CATEGORY (Include any caveats) NUMBER of PAGES Signature, Organization, and Title of person witnessing destruction (if required) Date of Destruction Printed with soy ink on recycled paper Signature, Organization, and Title of person destroying matter Date of Destruction I CERTIFY THAT THE MATTER LISTED ABOVE HAVE BEEN DESTROYED IN ACCORDANCE WITH CURRENT SECURITY REGULATIONS.

11

Controller's Office, OMB A-123 .:. Lawrence Berkeley National...  

NLE Websites -- All DOE Office Websites (Extended Search)

of Energy --- Cost Accounting Standards DOE Accounting Handbook Federal Accounting Standards Generally Accepted Accounting Principles OMB Circular...

12

Audit Report: OAS-M-08-02 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 2 Audit Report: OAS-M-08-02 November 26, 2007 Contract Transition Activities at the Nevada Test Site The Nevada Test Site (Test Site) is a unique combination of Federally-owned land and facilities located in a remote area approximately 65 miles northwest of Las Vegas, Nevada. The Test Site represents the United States' unique capability to support nuclear testing and complex dynamic experiments that involve nuclear and hazardous materials. Bechtel Nevada was the management and operating contractor of the Test Site from 1996 through June 30, 2006. In February 2005, the National Nuclear Security Administration (NNSA) competitively bid the contract to manage the Test Site and in March 2006 awarded the contract to the National Security Technologies, LLC (NSTec). NSTec is a limited liability company formed as a

13

All Other Editions Are Obsolete OMB Control No.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

18 18 (11-94) All Other Editions Are Obsolete OMB Control No. 1910-1800 BOTH SIDES OF THIS FORM MUST BE READ AND SIGNED U.S. DEPARTMENT OF ENERGY Public reporting burden for this collection of information is estimated to average 15 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Office of Information Resources Management Policy, Plans, and Oversight, Records Management Division, HR-422 - GTN, Paperwork Reduction Project (1910-1800), U.S. Department of Energy, 1000 Independence Avenue, S.W., Washington, DC 20585; and

14

Replaces EIA-459C All Other Editions Are Obsolete OMB Control No.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4600.4 4600.4 (04-94) Replaces EIA-459C All Other Editions Are Obsolete OMB Control No. 1910-0400 U.S. Department of Energy Federal Assistance Budget Information Public reporting burden for this collection of information is estimated to average 1.87 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Office of Information Resources Management Policy, Plans, and Oversight, Records Management Division, HR-422 - GTN, Paperwork Reduction Project (1910-0400), U.S. Department of Energy, 1000 Independence Avenue, S.W., Washington, DC 20585; and to the Office of Management and Budget (OMB), Paperwork

15

Previously DOE F 5635.11 All Other Editions Are Obsolete OMB Control No.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9.2 9.2 (08-93) Previously DOE F 5635.11 All Other Editions Are Obsolete OMB Control No. 1910-1800 U.S. DEPARTMENT OF ENERGY REPORTING UNACCOUNTED FOR DOCUMENTS OMB Burden Disclosure Statement Public reporting burden for this collection of information is estimated to average 24.3 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Office of Information Resources Management Policy, Plans, and Oversight, AD-244 - GTN, Paperwork Reduction Project (1910-1800), U.S. Department of Energy, 1000

16

OMB Burden Disclosure Statement  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

71.1 OMB Control Number 71.1 OMB Control Number (09/2012) (Classification) OMB Burden Disclosure Statement 1910-1800 Public reporting burden for this collection of information is estimated to average 10 (minutes) per response, including the time for reviewing instructions, searching exist ing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comme nts regarding this estimate or any other aspect of this information, including suggestions for reducing this burden, to Information, Records, and Resource Management, MA-41-GTN, Paperwork Reduction Project (1910-1800), U.S. Department of Energy, Washington, DC 20874-1290; and to the Office of Management and Budget (OMB), Paperwork Reduction Project (1910-1800),Washington, DC 20503.

17

Replaces EIA-459F All Other Editions Are Obsolete OMB Control No.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6 6 (10-94) Replaces EIA-459F All Other Editions Are Obsolete OMB Control No. 1910-0400 U.S. DEPARTMENT OF ENERGY FEDERAL ASSISTANCE PROGRAM/PROJECT STATUS REPORT Public reporting burden for this collection of information is estimated to average 47.5 hours per response, including the time for reviewing instructions, search- ing existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Office of Information Resources Management Policy, Plans, and Oversight, Records Management Division, HR-422 - GTN, Paperwork Reduction Project (1910-0400), U.S. Department of

18

LA02-08-02  

NLE Websites -- All DOE Office Websites (Extended Search)

Engineering group has completed development of Alt 355 for the B83 Modern Strategic Bomb. Alt 355 is a near-term field retrofit kit that incorporates design modifications to...

19

LA02-08-02  

NLE Websites -- All DOE Office Websites (Extended Search)

Issue Issue February 2002 Each year we at Sandia National Laborato- ries take great pride in cataloguing significant accomplishments achieved during the past year by the men and women who make up this great laboratory. The past year, 2001, was extraordinary for the diversity and richness of the achievements and for the one day, Septem- ber 11, that so deeply affected and changed our laboratory and our nation. Sandia's staff have rapidly shifted gears to turn up the rate of progress in our national security work, suddenly rendered even more important by the instantaneous change in the free world's secu- rity situation that occurred that day. All across the Labs, individuals and teams have all made heroic efforts to extend our technology contributions to both better pro- tect our troops and to help win the war against

20

Notice of OMB Action Approving DOE Submission to Extend Information  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OMB Action Approving DOE Submission to Extend Information OMB Action Approving DOE Submission to Extend Information Collection Request Title: OE Recovery Act Financial Assistance Grants Notice of OMB Action Approving DOE Submission to Extend Information Collection Request Title: OE Recovery Act Financial Assistance Grants The Office of Management and Budget (OMB) has issued a Notice of OMB Action approving the Department of Energy's request to extend for three years the Information Collection Request Title: OE Recovery Act Financial Assistance Grants, OMB Control No. 1910-5149 that DOE is developing for submission to OMB pursuant to the Paperwork Reduction Act of 1995. Supporting documentation for the request was submitted in September and October, 2011. Comments were due on or before November 7, 2011. ICR Supporting Statement (PDF). OMB Form 83-I (PDF). SGIG Reporting Guidance

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

OMB MPI Tests  

NLE Websites -- All DOE Office Websites (Extended Search)

OMB MPI Tests OMB MPI Tests Description The Ohio MicroBenchmark suite is a collection of independent MPI message passing performance microbenchmarks developed and written at The...

22

DOE F 473.2 U.S. DEPARTMENT OF ENERGY OMB Control No.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

(Administrative Update: 03/2013) SECURITY BADGE REQUEST 1910-1800 All Other Editions Are Obsolete OMB Burden Disclosure Statement on Reverse TO: Headquarters Physical Protection Team (J) Date: (K) U.S. CITIZEN? YES NO IF NO, COUNTRY (A) FROM: NAME (printed) AND SIGNATURE OF DOE SPONSOR HAVING LIAISON WITH APPLICANT (L) REQUEST APPLICANT BE ISSUED: DOE HEADQUARTERS SITE-SPECIFIC SECURITY BADGE (USED AT HQ ONLY) (CHECK ONE): "BAO" TO HQ Facilities "FOREIGN NATIONAL" (B) TITLE DIVISION/OFFICE DOE STANDARD SECURITY BADGE (Used at HQ AND Other DOE Sites): (CHECK ONE): "Q" "L" "BAO" (Also Check): OGA IPA

23

DOE F 473.2 U.S. DEPARTMENT OF ENERGY OMB Control No.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

(01/2006) 1910-1800 All Other Editions Are Obsolete SECURITY BADGE REQUEST OMB Burden Disclosure Statement on Reverse TO: Headquarters Physical Protection Team (J) DATE: (K) U.S. CITIZEN? O YES O NO IF NO, COUNTRY (A) FROM: NAME (printed) AND SIGNATURE OF DOE SPONSOR ( U.S. C EN Y N I N HAVING LIAISON WITH APPLICANT (L) REQUEST APPLICANT BE ISSUED: 0 DOE HEADQUARTERS SITE-SPECIFIC SECURITY BADGE iUsed at HO ONLY) (Check One): 0 "BAO" TO HQ Facilities O "FOREIGN NATIONAL' El DOE STANDARD SECURITY BADGE (Used at HQ AND Other DOE Sites): (B) TITLE DIVISION/OFFICE (Check One): 0 "0" 0"L' 0 "BAO" (Also Check): 0 OGA OIPA I certify that the applicant requires access to a DOE HQS facility to (M) BADGE AT: l FORSTL [ GTN

24

Supporting Statement: OE Recovery Act Financial Assistance Grants OMB  

NLE Websites -- All DOE Office Websites (Extended Search)

Supporting Statement: OE Recovery Act Financial Assistance Grants Supporting Statement: OE Recovery Act Financial Assistance Grants OMB Control Number 1910-5149 Supporting Statement: OE Recovery Act Financial Assistance Grants OMB Control Number 1910-5149 Supporting Statement: OE Recovery Act Financial Assistance Grants OMB Control Number 1910-5149. This statement provides additional informaton regarding the DOE request for processing of the renewal of the proposed information collection, OE Recovery Act Financial Assistance Grants. Supporting Statement: OE Recovery Act Financial Assistance Grants OMB Control Number 1910-5149 More Documents & Publications Notice of OMB Action Approving DOE Submission to Extend Information Collection Request Title: OE Recovery Act Financial Assistance Grants Notice of Office of Management and Budget Action to Approve with Change the

25

OMB Requirements | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

OMB Requirements OMB Requirements OMB Requirements Acquisitions OMB Circular A-109, Acquisition of Major Systems (04-05-76) (Available in hard copy only) OMB M-04-08, Maximizing Use of SmartBuy and Avoiding Duplication of Agency Activities with with the President's 24 E-Gov Initiatives (02-25-2004) (pdf) OMB M-04-16, Software Acquisition (07-01-2004) Budget/Capital Planning OMB Circular A-11 OMB M-05-23, Improving Informational Technology (IT) Project Planning and Execution (8-04-2005) (pdf) Cyber Security & Privacy OMB M-00-07, Incorporating and Funding Security in Information Systems Investments (02-28-2000) OMB M-02-01, Guidance for Preparing and Submitting Security Plans of Action and Milestones(10-19-2001) OMB M-02-09, Reporting Instructions for the Government Information

26

OMB Policies | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

OMB Policies OMB Policies OMB Policies Cybersecurity & Privacy OMB M-00-07, Incorporating and Funding Security in Information Systems Investments (02-28-2000) OMB M-02-01, Guidance for Preparing and Submitting Security Plans of Action and Milestones(10-19-2001) OMB M-02-09, Reporting Instructions for the Government Information Security Reform Act and Updated Guidance on Security Plans of Action and Milestones (07-02-2002) (pdf) OMB M-03-04, Determination Orders Organizing the Department of Homeland Security (01-07-2003) OMB M-03-17, Program Assessment Rating Tool (PART) Update (07-16-2003) (pdf) OMB M-03-19, Reporting Instructions for the Federal Information Security Management Act and Updated Guidance on Quarterly IT Security Reporting (08-06-2003) (pdf) OMB M-04-04, E-Authentication Guidance (12-06-2003)

27

OMB Circular A-123, Appendix B  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

T H E D I R E C T O R January 15, 2009 CIRCULAR NO. A-123, Appendix B Revised TO THE HEADS OF EXECUTIVE DEPARTMENTS AND ESTABLISHMENTS SUBJECT: Improving the Management of Government Charge Card Programs Appendix B of OMB Circular A-123 prescribes policies and procedures to agencies regarding how to maintain internal controls that reduce the risk of fraud, waste, and error in government charge card programs. This revision responds to recommendations made by the Government Accountability Office (GAO) regarding the Federal purchase card program as well as agency comments and suggestions made by Agency/Organization Program Coordinators. These revisions replace and rescind all previously issued OMB Circular A-123 Appendix B policy dated February 2006 and August 2005. Significant updates to Appendix B are as follows:

28

2004 OMB Annual Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FISCAL YEAR 2004 FISCAL YEAR 2004 ANNUAL REPORT TO THE OFFICE OF MANAGEMENT AND BUDGET - STANDARDS USE AND PARTICIPATION - U. S. DEPARTMENT OF ENERGY Standards Management: The Department of Energy (DOE) implements the federal guidance and requirements of OMB Circular A-119 (OMB A-119) and the statutory requirements of Public Law (PL) 104-113 (15 USC 272) regarding the use of voluntary consensus standards (VCSs) through specific Departmental directives (policies, orders, requirements, guides, and technical standards) and supporting programs and management systems. The Department's overall standards activities are managed through the DOE-wide Technical Standards Program (TSP), established under the DOE Standards Executive within the Office of Environment, Safety and Health. (The TSP Internet address is http://www.eh.doe.gov/techstds/).

29

2011 OMB Annual Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2011 Annual Report for The Department of Energy 1. Please describe the importance of standards in the achievement of your agency's mission, how your agency uses standards to deliver its primary services in support of its mission, and provide any examples or case studies of standards success. Please include relevant Internet links and links to your agency's standards website. In accordance with the 2011 OMB Report data call, the Department of Energy (DOE) Technical Standards Program (TSP) asked for input from all DOE organizations. The request included a documentation of new case studies involving the benefits of non- government voluntary consensus standards in DOE work. Based on the input received,

30

OMB and CEQ Joint Memorandum on Environmental Collaboration and...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OMB and CEQ Joint Memorandum on Environmental Collaboration and Conflict Resolution OMB and CEQ Joint Memorandum on Environmental Collaboration and Conflict Resolution This Office...

31

08-02-2010 NNSA-B-10-0311  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

or equipment, environmental quality maintained B1.25 - Transfer, disposition, or acquisition of uncontaminated land for habitat preservation/wildlife management B1.26 - Siting/construction/operation/decommissioning of small water B1.27 - Disconnection of utilities B1.28 - Placement of unused facilities in environmentally safe condition B1.29 - Small on-site const/demolition waste disposal facility const/oper/decom B1.30 - Transfer/transportation actions, quantities incidental to amounts at receiving site B1.31 - Relocation/operation of machinery or equipment, similar use B1.32 - Traffic flow adjustments, existing roads. B2.1 - Modifications to enhance workplace habitability B2.2 - Installation/improvement of building/equipment instrumentation

32

08-02-2010 NNSA-B-10-0328  

National Nuclear Security Administration (NNSA)

decomm of facilities for R&D, B3.7 - New infill exploratory, experimental oilgasgeothermal constructionoperation B3.8 - Outdoor ecologicalenvironmental research in small...

33

08-02-2010 NNSA-B-10-0295  

National Nuclear Security Administration (NNSA)

decomm of facilities for R&D, B3.7 - New infill exploratory, experimental oilgasgeothermal constructionoperation B3.8 - Outdoor ecologicalenvironmental research in small...

34

08-02-2010 NNSA-B-09-0265  

National Nuclear Security Administration (NNSA)

decomm of facilities for R&D, B3.7 - New infill exploratory, experimental oilgasgeothermal constructionoperation B3.8 - Outdoor ecologicalenvironmental research in small...

35

08-02-2010 NNSA-B-10-0311  

National Nuclear Security Administration (NNSA)

decomm of facilities for R&D, B3.7 - New infill exploratory, experimental oilgasgeothermal constructionoperation B3.8 - Outdoor ecologicalenvironmental research in small...

36

Enforcement Letter -Rocky Flats-08/02/2000  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 It is recognized that the deficiencies did not result in an actual unanticipated event, but given the failure to monitor gas concentration, the demonstrated increase in gas...

37

08-02-2010 NNSA-B-09-0265  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LaboratoriesNew Mexico (SNLNM) proposes to provide mobile meteorological instrumentation on an as-needed or as-required basis. SNLNM owns and operates a suite of mobile...

38

08-02-2010 NNSA-B-10-0295  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8-02-2010 NNSA-B-10-0295 Sandia National LaboratoriesNew Mexico (SNLNM) proposes to heat equipment formerly used in the SNLNM explosives machine shop to burn off any traces of...

39

Technology Commercialization and Partnerships | BSA 08-02 ...  

Changes in methyl CpG islands have been associated with particular cancer diagnoses and ... Brookhaven National Laboratory conducts research in the ...

40

08-02-2010 NNSA-B-10-0328  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

onsite storage of activated material at existing facility B1.14 - Refueling of a nuclear reactor B1.19 - Sitingconstructionoperation of microwaveradio communication towers...

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

OMB Circular A-76 (Revised)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EXECUTIVE OFFICE OF THE PRESIDENT EXECUTIVE OFFICE OF THE PRESIDENT OFFICE OF MANAGEMENT AND BUDGET WASHINGTON, DC 20503 May 29, 2003 CIRCULAR NO. A-76 (REVISED) TO THE HEADS OF EXECUTIVE DEPARTMENTS AND ESTABLISHMENTS SUBJECT: Performance of Commercial Activities 1. Purpose. This circular establishes federal policy for the competition of commercial activities. 2. Supersession. This circular supersedes Office of Management and Budget (OMB) Circular No. A-76 (Revised 1999), August 4, 1983; Circular No. A-76 Revised Supplemental Handbook (Revised 2000), March 1996; Office of Federal Procurement Policy Letter 92-1, "Inherently Governmental Functions," September 23, 1992; and OMB Transmittal Memoranda 1 through 25, Performance of Commercial Activities. 3. Authority. Reorganization Plan No. 2 of 1970 (31 U.S.C. § 1111); Executive Order 11541; the Office

42

Technical Standards, OMB Circular A-119 - May 14, 1998 | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OMB Circular A-119 - May 14, 1998 Technical Standards, OMB Circular A-119 - May 14, 1998 May 14, 1998 Federal Participation in the Development and Use of Voluntary Consensus...

43

DOC Annual Reports to OMB on Technology Transfer  

Science Conference Proceedings (OSTI)

*. Bookmark and Share. Department of Commerce (DOC) Annual Reports to the Office of Management and Budget (OMB) on Technology Transfer. ...

2013-08-01T23:59:59.000Z

44

2007 OMB Annual Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

in during FY 2007: 81 Voluntary Consensus Standards Body Acronym Air Conditioning & Refrigeration Institute ARI Air Movement and Control Association AMCA American...

45

Microsoft Word - OE Monthly Reporting Request OMB 83I Renewal 2011 09282011.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Department of Energy 2. OMB control number b. __ None a. 1910-5149 3. Type of information collection (check one) a. New Collection b. Revision of a currently approved collection c. X Extension of a currently approved collection d. Reinstatement, without change, of a previously approved collection for which approval has expired. e. Reinstatement, with change, of a previously approved collection for which approval has expired f. Existing collection in use without OMB control number For b-f, note item A2 of Supporting Statement instructions 4. Type of review requested (check one) a. X Regular b. Emergency c. Delegated 5. Small entities Will this information collection have a significant economic impact on a substantial

46

OMB and CEQ Memorandum on Environmental Collaboration and Conflict...  

NLE Websites -- All DOE Office Websites (Extended Search)

and Conflict Resolution September 18, 2012 - 3:01pm Addthis The Office of Management and Budget (OMB) and the Council on Environmental Quality (CEQ) on September 7,...

47

OMB Form 83-C, Paperwork Reduction Act Change Worksheet, October 1995  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CHANGE WORKSHEET CHANGE WORKSHEET Agency/Subagency OMB control number Enter only items that change Current record New record Agency form number(s) Annual reporting and recordkeeping hour burden Number of respondents Total annual responses Percent of these responses collected electronically Total annual hours Difference Explanation of difference Program change Adjustment % % Other changes** For OIRA Use Date: **This form cannot be used to extend an expiration date. OMB FORM 83-C, 10/95 Signature of Senior Official or designee: Annual reporting and recordkeeping cost burden (in thousands of dollars) Total annualized Capital/Startup costs Total annual costs (O&M) Total annualized cost requested Difference Explanation of difference Program change Adjustment

48

OMB and CEQ Memorandum on Environmental Collaboration and Conflict  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OMB and CEQ Memorandum on Environmental Collaboration and Conflict OMB and CEQ Memorandum on Environmental Collaboration and Conflict Resolution OMB and CEQ Memorandum on Environmental Collaboration and Conflict Resolution September 18, 2012 - 3:01pm Addthis The Office of Management and Budget (OMB) and the Council on Environmental Quality (CEQ) on September 7, 2012, issued a joint memorandum calling for department and agency commitment to the goals identified in the Memorandum on Environmental Collaboration and Conflict Resolution, and the goals identified in related policy guidance. This memorandum supersedes an OMB/CEQ joint memorandum issued in November 28, 2005, on Environmental Conflict Resolution. It broadens the efforts called for under the 2005 memorandum by explicitly encouraging appropriate and effective upfront environmental collaboration to minimize or prevent

49

OMB and CEQ Memorandum on Environmental Collaboration and Conflict  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OMB and CEQ Memorandum on Environmental Collaboration and Conflict OMB and CEQ Memorandum on Environmental Collaboration and Conflict Resolution OMB and CEQ Memorandum on Environmental Collaboration and Conflict Resolution September 18, 2012 - 3:01pm Addthis The Office of Management and Budget (OMB) and the Council on Environmental Quality (CEQ) on September 7, 2012, issued a joint memorandum calling for department and agency commitment to the goals identified in the Memorandum on Environmental Collaboration and Conflict Resolution, and the goals identified in related policy guidance. This memorandum supersedes an OMB/CEQ joint memorandum issued in November 28, 2005, on Environmental Conflict Resolution. It broadens the efforts called for under the 2005 memorandum by explicitly encouraging appropriate and effective upfront environmental collaboration to minimize or prevent

50

Microsoft Word - GRS Review_OMB White Paper - Real Property Right...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

GRS ReviewOMB White Paper - Real Property Right-sizing and Carbon Reduction August 7 2009 2.docx Microsoft Word - GRS ReviewOMB White Paper - Real Property Right-sizing and...

51

Microsoft Word - GRS Review_OMB White Paper - Real Property Right...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Microsoft Word - GRS ReviewOMB White Paper - Real Property Right-sizing and Carbon Reduction August 7 2009 2.docx Microsoft Word - GRS ReviewOMB White Paper - Real Property...

52

Policy Flash 2013-48 OMB memorandum M-13-10, Antideficiency Act...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

48 OMB memorandum M-13-10, Antideficiency Act Implications of Certain Online Terms of Service Agreements Policy Flash 2013-48 OMB memorandum M-13-10, Antideficiency Act...

53

Policy Flash 2013-48 OMB memorandum M-13-10, Antideficiency Act...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8 OMB memorandum M-13-10, Antideficiency Act Implications of Certain Online Terms of Service Agreements Policy Flash 2013-48 OMB memorandum M-13-10, Antideficiency Act Implications...

54

OMB and CEQ Joint Memorandum on Environmental Collaboration and Conflict  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OMB and CEQ Joint Memorandum on Environmental Collaboration and OMB and CEQ Joint Memorandum on Environmental Collaboration and Conflict Resolution OMB and CEQ Joint Memorandum on Environmental Collaboration and Conflict Resolution This Office of Management and Budget (OMB) and Council on Environmental Quality (CEQ) joint memorandum expands and builds on the November 28, 2005, Environmental Conflict Resolution (ECR) Memorandum, directing departments and agencies to increase the appropriate and effective use of third-party assisted environmental collaboration as well as environmental conflict resolution to resolve problems and conflicts that arise in the context of environmental, public lands, or natural resources issues, including matters related to energy, transportation, and water and land management. This memorandum supersedes and broadens the 2005 memorandum on ECR by

55

Revised OMB Circular A-76 (Revised November 14, 2002)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OMB Circular A-76 Revision Comments OMB Circular A-76 Revision Comments DRAFT OMB CIRCULAR A-76 (NOVEMBER 14, 2002) REVIEW COMMENTS AND RECOMMENDATIONS GENERAL COMMENTS: The Department of Energy (DOE) supports the overarching goal of OMB Circular A-76 that agencies should obtain "the best deal to the Taxpayer." We also support revisions to the Circular that "Keep the Process Moving" with the end result being: Faster/Cheaper Competitions; Improved Performance and Measures; Enhanced/Expanded Competition; Fairness; Realizing Significant Savings; and the Redirection of Resources to Mission Critical Requirements. Upon review of the draft Circular, the Department believes the proposed changes to Circular reflect a general improvement over the current version. The Department does, however, have

56

Form Approval: OMB No. 1905-0129  

U.S. Energy Information Administration (EIA) Indexed Site

Due Date: 2013 Due Date: 2013 Form Approval: OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden hours: 0.75 SCHEDULE 1. IDENTIFICATION Contact Information Form EIA-861S ANNUAL ELECTRIC POWER INDUSTRY REPORT (Short Form) NOTICE: This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. For further information concerning sanctions and data protections see the provisions on sanctions and the provisions concerning the confidentiality of information in the instructions. Title 18 U.S.C. 1001 makes it a criminal offense for any person knowingly and willingly to make to any Agency or Department of the United States any false, fictitious, or fraudulent statements as to any matter within its jurisdiction. Entities that report using the Form EIA-861 do

57

09121-3300-10 - PhaseI Final Report - 08-02-12  

NLE Websites -- All DOE Office Websites (Extended Search)

RPSEA RPSEA Phase I Final Report 09121-3300-10.Phase_I_Final Development of Carbon Nanotube Composite Cables for Ultra- Deepwater Oil and Gas Fields RPSEA Subcontract 09121-3300-10 August 1, 2012 Terry Holesinger Staff Scientist Los Alamos National Laboratory MS G755 Los Alamos, NM 87545 LEGAL NOTICE This report was prepared by Los Alamos National Laboratory a. MAKES ANY WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED WITH RESPECT TO ACCURACY, COMPLETENESS, OR USEFULNESS OF THE INFORMATION CONTAINED IN THIS DOCUMENT, OR THAT THE USE OF ANY INFORMATION, APPARATUS, METHOD, OR PROCESS DISCLOSED IN THIS DOCUMENT MAY NOT INFRINGE PRIVATELY OWNED RIGHTS, OR as an account of work sponsored by the Research Partnership to Secure Energy for America, RPSEA. Neither

58

Microsoft Word - 08-02-06 Security Lessons Learned TEC Security Topic Group.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6, Final 6, Final 1 DOE Spent Nuclear Fuel Transportation: Lessons Learned from Security Planning and Execution OCRWM has reviewed lessons learned from past high visibility Spent Nuclear Fuel (SNF) and other radioactive material shipping campaigns. The objective was to identify trends and commonalities from past DOE shipping campaigns, which could be considered when planning for the development and operation of a national transportation system to fulfill requirements of the Nuclear Waste Policy Act (NWPA). The study examined specific planning, business, institutional and operating practices that have been identified by DOE, its transportation contractors, and stakeholders as important issues that arise repeatedly. In addition, lessons learned or activities/actions which were found not to be

59

Audit Report: OAS-FS-08-02 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 9, 2007 Report on the Department of Energy's Fiscl year 2007 Consolidated Financial Statements This is to inform you that the audit of the Departments Fiscal Year...

60

Microsoft Word - 08-02-06 Security Lessons Learned TEC Security...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

(SNF) and other radioactive material shipping campaigns. The objective was to identify trends and commonalities from past DOE shipping campaigns, which could be considered when...

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

09121-3300-10 - PhaseI Final Report - 08-02-12  

NLE Websites -- All DOE Office Websites (Extended Search)

tolerant (300 bar) 3.2 Background and Scope of Work In order to make practical use of carbon nanotubes (CNTs) for high-performance conductors, material handling and wire...

62

Microsoft Word - LAP REC Principles - FINAL 2010-08-02.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

If the sum of allocated energy for all program participants is higher than the LAP hydropower generation in a calendar year, RECs generated under the program will be...

63

OMB No. 1905-0165 Expiration Date: 1/31/2013 Version No.:2010.01 ...  

U.S. Energy Information Administration (EIA)

https://signon.eia.doe.gov/upload/noticeoog.jsp. OMB No. 1905-0165 ... Required Required Required Required Type of Commodity Port of Entry Country of Origin Quantity

64

OMB No. 1905-0175 Expiration Date: 12/31/2011 Version No ...  

U.S. Energy Information Administration (EIA)

CURRENT POST-EMERGENCY PLANT OPERATIONAL STATUS MMcf/Day Expiration Date: 12/31/2011 OMB No. 1905-0175 FORM EIA-757 Schedule B: Emergency Status ...

65

DOE _Final_ DOE - Enclosure 4 to 2005 CS 647b Report OMB.d…...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4 to 2005 CS 647b Report OMB.d&8230;&0; DOE Final DOE - Enclosure 4 to 2005 CS 647b Report OMB.d&8230;&0; DOE Final DOE - Enclosure 4 to 2005 CS 647b Report...

66

OMB Control No. DOE F 5484.3  

E-Print Network (OSTI)

/Smoke: Building Brush Vehicle Other Electrical: Equipment Contact Wiring Overload Insulation Polarity Grounding

67

OMB No. 1905-0165 Expiration Date: 1/31/2013 Version No.:2010 ...  

U.S. Energy Information Administration (EIA)

OMB No. 1905-0165 Expiration Date: 1/31/2013 Version No.:2010.01 PART 2. SUBMISSION/RESUBMISSION INFORMATION Year REPORT PERIOD: If this is a ...

68

Microsoft Word - GRS Review_OMB White Paper - Real Property Right...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

- Submitted to OMB August 7th, 2009 1 Whitepaper on Real Property Right-Sizing and Carbon Footprint Reduction Purpose: 1. The team (identified at the end of this document) was...

69

U.S. DEPARTMENT OF ENERGY OMB Number: XXXX-XXXX U.S. Energy ...  

U.S. Energy Information Administration (EIA)

EIA-863: PETROLEUM PRODUCT SALES IDENTIFICATION SURVEY. U.S. DEPARTMENT OF ENERGY U.S. Energy Information Administration . Washington, D.C. 20585 . OMB Number: XXXX-XXXX

70

OMB No. 1905-0165 Expiration Date: 1/31/2013 Version No.:2010 ...  

U.S. Energy Information Administration (EIA)

OMB No. 1905-0165 Expiration Date: 1/31/2013 Version No.:2010.01 PART 2. SUBMISSION/RESUBMISSION INFORMATION Year REPORT PERIOD: If this is a resubmission, enter an ...

71

OMB Approval No. 0348-0041 BUDGET INFORMATION - Construction Programs  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OMB Approval No. 0348-0041 BUDGET INFORMATION - Construction Programs NOTE: Certain Federal assistance programs require additional computations to arrive at the Federal share of project costs eligible for participation. If such is the case, you will be notified. COST CLASSIFICATION a. Total Cost b. Costs Not Allowable for Participation c. Total Allowable Costs (Columns a-b) 1 Administrative and legal expenses $0.00 $0.00 $0.00 2 Land, structures, rights-of-way, appraisals, etc. $0.00 $0.00 $0.00 3 Relocation expenses and payments

72

DOE-HDBK-1122-99; Radiological Control Technician Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Radioactive Source Control Radioactive Source Control Study Guide 2.08-1 Course Title: Radiological Control Technician Module Title: Radioactive Source Control Module Number: 2.08 Objectives: 2.08.01 Describe the requirements for radioactive sources per 10 CFR 835. i 2.08.02 Identify the characteristics of radioactive sources that must be controlled at your site. i 2.08.03 Identify the packaging, marking, and labeling requirements for radioactive sources. i 2.08.04 Describe the approval and posting requirements for radioactive materials areas. i 2.08.05 Describe the process and procedures used at your site for storage and accountability of radioactive sources. INTRODUCTION A radioactive source is material used for its emitted radiation. Sources are constructed as sealed or unsealed and are classified as accountable or exempt.

73

DOE-HDBK-1122-99; Radiological Control Technician Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8 Radioactive Source Control 8 Radioactive Source Control Instructor's Guide 2.08-1 Course Title: Radiological Control Technician Module Title: Radioactive Source Control Module Number: 2.08 Objectives: 2.08.01 Describe the requirements for radioactive sources per 10 CFR 835. L 2.08.02 Identify the characteristics of radioactive sources that must be controlled at your site. L 2.08.03 Identify the packaging, marking, and labeling requirements for radioactive sources. L 2.08.04 Describe the approval and posting requirements for radioactive materials areas. L 2.08.05 Describe the process and procedures used at your site for storage and accountability of radioactive sources. References: 1. 10 CFR 835, "Occupational Radiation Protection," (1998) Instructional Aids: 1. Overheads 2. Overhead projector and screen

74

McNary-John Day Transmission Line Project Record of Decision (DOE/EIs-0332), (11/08/02)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

McNary-John Day Transmission Line Project McNary-John Day Transmission Line Project Record of Decision Decision The Bonneville Power Administration (Bonneville) has decided to construct the proposed McNary-John Day Transmission Line Project in Benton and Klickitat Counties, Washington, and Sherman and Umatilla Counties, Oregon. Bonneville has decided to implement the proposed action identified in the McNary-John Day Transmission Line Project Final Environmental Impact Statement (DOE/EIS-0332, August 2002). The proposed action consists of building 79 miles of 500-kilovolt (kV) transmission line between Bonneville's McNary Substation and John Day Substation. As part of the proposed action, Bonneville has also decided to construct certain short-line routing alternatives identified in the Final EIS. These alternatives are the

75

Microsoft PowerPoint - S08-02_Rios-Armstrong_SRS Experience Preparing Salt Batches.ppt  

NLE Websites -- All DOE Office Websites (Extended Search)

Savannah River Site (SRS) Experience Savannah River Site (SRS) Experience with Preparing Salt Batches Presentation to: EM Waste Processing Technical Exchange Date: November 17 th , 2010 Author: Maria A. Rios-Armstrong Position: Small Column Ion Exchange (SCIX) Process Engineering Lead Savannah River Remediation SRR-SPT-2010-00222 Print Close 2 Agenda * SRS Composite Inventory * Salt Processing * SRS Liquid Waste System * Background * Interim Salt Disposition Project (ISDP) Salt Batches - ISDP Salt Batch 1 - ISDP Salt Batch 2 - ISDP Salt Batch 3 - ISDP Salt Batch 4 * Future Salt Batches * Summary * Questions Print Close 3 SRS Composite Inventory Saltcake Sludge Volume 37.1 Million Gallons (Mgal) Curies 183 MCi (52%) 169 MCi (48%) 352 Million Curies (MCi) 171 MCi (49%) Sludge 34.2 Mgal (92%) 2.9 Mgal (8%) 18.4 Mgal (49%) Inventory values as of 2010-06-30

76

Draft ERUS 2014 OMB Supporting Statement, Part B  

Gasoline and Diesel Fuel Update (EIA)

NUMBER 1905-0129 SUPPORTING STATEMENT, PART B NUMBER 1905-0129 SUPPORTING STATEMENT, PART B i Supporting Statement for Survey Clearance: Electric Power and Renewable Surveys Part B: Collection of Information Employing Statistical Methods Assistant Administrator for Energy Statistics | Office of Electricity, Renewables & Uranium Statistics OMB Number 1905-0129 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 FORM EIA-63B, Annual Photovoltaic Cell/Module Shipments Report FORM EIA-411, Coordinated Bulk Power Supply Program Report FORM EIA-826, Monthly Electric Utility Sales and Revenue Report with State Distributions FORM EIA-860, Annual Electric Generator Report FORM EIA-860M, Monthly Update to the Annual Electric Generator Report

77

Microsoft Word - 06-22-09 FINAL ECAT Comments on OMB Recovery Act Guidance.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EMERGENCY COMMITTEE FOR AMERICAN TRADE EMERGENCY COMMITTEE FOR AMERICAN TRADE ________________________________________________________________________________________________________ 900 17 th St., N.W., Suite 1150, Washington, D.C. 20006 Phone 202.659.5147 Fax 202.659.1347 www.ecattrade.com June 22, 2009 Ms. Marguerite Pridgen Office of Federal Financial Management Submitted via www.regulations.gov Office of Management and Budget Executive Office of the President New Executive Office Building, Washington, DC 20503 Re: Comments on OMB's Interim Final Recovery Act Guidance Dear Ms. Pridgen: Please find below comments submitted on behalf of the Emergency Committee for American Trade (ECAT) on OMB's Interim Final Guidance regarding implementation of Section 1605 of the American

78

Internal Controls Guidance | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Internal Controls Guidance Internal Controls Guidance Internal Controls Guidance Guidance required to be implemented by Departmental elements to meet the requirements of the Federal Managers' Financial Integrity Act (FMFIA), as described in Office of Management and Budget (OMB) Circular A-123, Management's Responsibility for Internal Control. This guidance provides instructions for conducting internal controls evaluations and help ensure the Secretary's annual Statement of Assurance is accurate and adequately supported. Internal Control Evaluations Guidance More Documents & Publications Re: DOE Request for Information - Implementing the National Broadband Plan by Studying the Communications Requirements of Electric Utilities To Inform Federal Smart Grid Policy Request for Information - Operations and Maintenance (O & M) Support

79

DOE-HDBK-1122-99; Radiological Control Technician Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8 Biological Effects of Radiation 8 Biological Effects of Radiation Study Guide 1.08-1 Course Title: Radiological Control Technician Module Title: Biological Effects of Radiation Module Number: 1.08 Objectives: 1.08.01 Identify the function of the following cell structures: a. Cell membrane b. Cytoplasm c. Mitochondria d. Lysosome e. Nucleus f. DNA g. Chromosomes 1.08.02 Identify effects of radiation on cell structures. 1.08.03 Define the law of Bergonie and Tribondeau. 1.08.04 Identify factors which affect the radiosensitivity of cells. 1.08.05 Given a list of types of cells, identify which are most or least radiosensitive. 1.08.06 Identify primary and secondary reactions on cells produced by ionizing radiation. 1.08.07 Identify the following definitions and give examples of each: a. Stochastic effect b. Non-stochastic effect

80

DOE-HDBK-1122-99; Radiological Control Technician Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Biological Effects of Radiation Biological Effects of Radiation Instructor's Guide 1.08-1 Course Title: Radiological Control Technician Module Title: Biological Effects of Radiation Module Number: 1.08 Objectives: 1.08.01 Identify the function of the following cell structures: a. Cell membrane b. Cytoplasm c. Mitochondria d. Lysosome e. Nucleus f. DNA g. Chromosomes 1.08.02 Identify effects of radiation on cell structures. 1.08.03 Define the law of Bergonie and Tribondeau. 1.08.04 Identify factors which affect the radiosensitivity of cells. 1.08.05 Given a list of types of cells, identify which are most or least radiosensitive. 1.08.06 Identify primary and secondary reactions on cells produced by ionizing radiation. 1.08.07 Identify the following definitions and give examples of each: a. Stochastic effect b. Non-stochastic effect

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

OMB Memorandum No. 95-18--Agency Plans for Operations During Funding Hiatus  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EXECUTIVE EXECUTIVE OFFICE OF THE PRESIDENT OFFICE OF MANAGEMENT AND BUDGET WASHINGTON, D.C. 20503 THE DIRECTOR August 22, 1995 M-95-l8 MEMORANDUM FOR HEADS OF FROM: Alice M. Director EXECUTIVE DEPARTMENTS RiVli~ AND AGENCIES SUBJECT: Agency Plans for Operations During Funding Hiatus OMB Bulletin 80-14, dated August 28, 1980 (and amended by the OMB Director's memorandum of November 17, 1981) requires all agencies to maintain contingency plans to deal with a possible appropriations hiatus. The bulletin requires agency plans to be consistent with the January 16, 1981 opinion of the Attorney General on this subject. The Office of Legal Counsel of the Department of Justice has issued an opinion dated August 16, 1995 that updates the 1981 opinion. A copy of the August 16th opinion is attached. You should review your plans in light of this opinion, make any changes necessary to conform to the opinion,

82

FY 2013 Control Table by Appropriation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Summary Control Table by Appropriation Summary Control Table by Appropriation (dollars in thousands - OMB Scoring) FY 2011 FY 2012 FY 2013 Current Enacted Congressional Approp. Approp. * Request $ % Discretionary Summary By Appropriation Energy And Water Development, And Related Agencies Appropriation Summary: Energy Programs Energy efficiency and renewable energy......................................... 1,771,721 1,809,638 2,337,000 +527,362 +29.1% Electricity delivery and energy reliability.......................................... 138,170 139,103 143,015 +3,912 +2.8% Nuclear energy................................................................................ 717,817 765,391 770,445 +5,054 +0.7% Fossil energy programs Clean coal technology..................................................................

83

FY 2009 Control Table by Appropriation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Control Table by Appropriation Control Table by Appropriation (dollars in thousands - OMB Scoring) FY 2007 FY 2008 FY 2009 Current Current Congressional Op. Plan Approp. Request $ % Discretionary Summary By Appropriation Energy And Water Development, And Related Agencies Appropriation Summary: Energy Programs Energy efficiency and renewable energy.......................... -- 1,722,407 1,255,393 -467,014 -27.1% Electricity delivery and energy reliability........................... -- 138,556 134,000 -4,556 -3.3% Nuclear energy.................................................................. -- 961,665 853,644 -108,021 -11.2% Legacy management........................................................ -- 33,872 -- -33,872 -100.0% Energy supply and Conservation...................................... 2,145,149 -- -- -- -- Fossil energy programs

84

OMB Circular A-119 Federal Participation in the Development and Use of Voluntary Consensus Standards and in Conformity Assessment Activities; Notice  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8545 8545 Thursday February 19, 1998 Part IV Executive Office of the President Office of Management and Budget OMB Circular A-119; Federal Participation in the Development and Use of Voluntary Consensus Standards and in Conformity Assessment Activities; Notice 8546 Federal Register / Vol. 63, No. 33 / Thursday, February 19, 1998 / Notices EXECUTIVE OFFICE OF THE PRESIDENT Office of Management and Budget OMB Circular A-119; Federal Participation in the Development and Use of Voluntary Consensus Standards and in Conformity Assessment Activities AGENCY: Office of Management and Budget, EOP. ACTION: Final Revision of Circular A- 119. SUMMARY: The Office of Management and Budget (OMB) has revised Circular A-119 on federal use and development of voluntary standards. OMB has revised this Circular in order to make

85

OMB No. 0990-0115 U.S. DEPARTMENT OF HEALTH AND HUMAN SERVICES PHS 2013-1  

E-Print Network (OSTI)

2013-1, Solicitation for SBIR Contract Proposals 5 1.5 REPORT FRAUD, WASTE AND ABUSE The OfficeOMB No. 0990-0115 U.S. DEPARTMENT OF HEALTH AND HUMAN SERVICES PHS 2013-1 SOLICITATION #12;PHS 2013-1, Solicitation for SBIR Contract Proposals ii TABLE OF CONTENTS PART I INSTRUCTIONS

Martin, Alex

86

Form Approved Through 9/30/2007 OMB No. 0925-0001 Department of Health and Human Services  

E-Print Network (OSTI)

Form Approved Through 9/30/2007 OMB No. 0925-0001 Department of Health and Human Services Public Health Services Review Group Type Activity Grant Number Total Project Period From: Through: Requested, SERVICE, LABORATORY, OR EQUIVALENT 5. TITLE AND ADDRESS OF ADMINISTRATIVE OFFICIAL 2d. MAJOR SUBDIVISION E

Wisconsin at Madison, University of

87

Form Approved Through 6/30/2012 OMB No. 0925-0001 Department of Health and Human Services  

E-Print Network (OSTI)

Form Approved Through 6/30/2012 OMB No. 0925-0001 Department of Health and Human Services Public Health Services Grant Application Do not exceed character length restrictions indicated. LEAVE BLANK) E-MAIL ADDRESS: 3e. DEPARTMENT, SERVICE, LABORATORY, OR EQUIVALENT 3f. MAJOR SUBDIVISION 3g

Wisconsin at Madison, University of

88

Controller's Office .:. Lawrence Berkeley National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

of Energy --- Cost Accounting Standards DOE Accounting Handbook Federal Accounting Standards Generally Accepted Accounting Principles OMB Circular...

89

Notice of Intent to prepare an environmental impact statement for the Eastern Plains Transmission Project, Colorado and Kansas (DOE/EIS-0390) (08/02/06)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

733 Federal Register 733 Federal Register / Vol. 71, No. 148 / Wednesday, August 2, 2006 / Notices term of the proposed preliminary permit would be 36 months. The work proposed under the preliminary permit would include economic analysis, preparation of preliminary engineering plans, and a study of environmental impacts. Based on the results of these studies, the Applicant would decide whether to proceed with the preparation of a development application to construct and operate the project. r. Comments, Protests, or Motions to Intervene: Anyone may submit comments, a protest, or a motion to intervene in accordance with the requirements of Rules of Practice and Procedure, 18 CFR 385.210, .211, .214. In determining the appropriate action to take, the Commission will consider all

90

Electrochemical and Integrated Process Opportunities for On-Site/On-Demand Generation of Chlorine Dioxide - Final Report - 08/02/1996 - 08/01/1999  

DOE Green Energy (OSTI)

Due to continued evidence of environmental harm from elemental chlorine bleaching, the nation's paper industry continues to search for cost effective alternative bleaching. A practical and cost effective bleaching alternative is chlorine dioxide manufactured entirely from sodium chlorate. Sodium chlorate is produced by the electrolysis of brine in an undivided cell with steel plate cathodes and dimensionally stable anodes. Although the overpotential at the anode is only 50 mV, the cathodic overpotential is 940 mV. Thus, nearly one volt of electricity is wasted in driving hydrogen evolution at the cathode. Auburn University's Center for Microfibrous Materials Manufacturing has demonstrated that high performance, three dimensional, microfibrous electrodes can improve the performance of capacitors, batteries, hybrid power cells, and electrolysis electrodes in a variety of applications. The goal of this research was to apply this technology to a chlorate cell's cathode and reduce the overpotential between 200 and 400 mV. An economic analysis of the industry has shown that for every 100 mV reduction in overpotential, $100 per square meter of electrode can be saved annually. Due to their enhanced surface area over plates, corrosion of microfibrous electrodes is a major issue in this research. Samples based on chromium protection (i.e. stainless steel) have proved unfeasible for chlorate application. However, samples based on stainless steel and nickel show dramatic performance improvements over industry status quo in chlor-alkali application. Building microfibrous electrodes on a titanium base protected with a silver coating alleviates the corrosion problem and provides 100 mV or more of overpotential reduction. Further reduction is realized by impregnating silver-titanium microfibrous mesh with a PVDF binder and dispersed platinum on activated carbon. The resulting electrodes are mechanically sound, active towards hydrogen evolution, and hold promise for practical industry use.

Tatarchuk, Bruce J.; Krishnagopalan, G.; Nickell, Ryan A.

2000-01-30T23:59:59.000Z

91

FY 2012 Control Table by Appropriation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FY 2012 Summary Control Table by Appropriation (dollars in thousands - OMB Scoring) FY 2010 FY 2011 FY 2011 FY 2012 Current Congressional Annualized Congressional Approp. Request CR Request $ % Discretionary Summary By Appropriation Energy And Water Development, And Related Agencies Appropriation Summary: Energy Programs Energy efficiency and renewable energy....................................... 2,216,392 2,355,473 2,242,500 3,200,053 +983,661 +44.4% Electricity delivery and energy reliability........................................ 168,484 185,930 171,982 237,717 +69,233 +41.1% Nuclear energy............................................................................. 774,578 824,052 786,637 754,028

92

Calendar Year 2007 | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

7 7 Calendar Year 2007 RSS December 19, 2007 Inspection Report: IG-0784 The Department of Energy's Pandemic Influenza Planning December 18, 2007 Audit Report: OAS-M-08-04 Management Controls over Operations of the Integrated Disposal Facility atthe Hanford Site December 17, 2007 Audit Report: IG-0783 Beryllium Surface Contamination at the Y-12 National Security Complex December 13, 2007 Special Report: IG-0782 Management Challenges at the Department of Energy December 11, 2007 Audit Report: OAS-L-08-03 The Department of Energy's Implementation of Revised OMB Circular No. A-123 December 11, 2007 Audit Report: OAS-M-08-03 Management Controls over Implementation of the Homeland Defense Equipment Reuse Program November 28, 2007 Audit Letter Report: OAS-L-08-02 Department's Implementation of the Strategic Integrated Procurement

93

Microsoft Word - OMB_300_AA Test Invest _Rev 4_ 10-14-2010[1]  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exhibit 300: Capital Asset Plan and Business Case Summary Exhibit 300: Capital Asset Plan and Business Case Summary Part I: Summary Information And Justification (All Capital Assets) Section A: Overview 1. Date of Submission: 2. Agency: 3. Bureau: 4. Name of this Investment: 5. Unique Project (Investment) Identifier (UPI) For IT investment only, see section 53.9. For all other, use agency ID if applicable. 6. What kind of investment will this be in FY 2012? (Please NOTE: Investments with Planning/Acquisition activities in FY 2011 should not select O&M.) 7. What was the first budget year this investment was submitted to OMB? (YYYY) 8. a) Provide a brief summary of the investment and justification, including a brief description of how this closes in part or in whole an identified agency performance gap, specific accomplishments expected by the budget year and the related benefit to

94

3-Year Renewal Request of OMB 1910-0818, Security, Information Request  

NLE Websites -- All DOE Office Websites (Extended Search)

HSS Topical Areas HSS Topical Areas Quality Assurance Enforcement / Oversight Environment HSS Outreach and Communications HSPD-12 Nuclear Materials Management & Safeguards System (NMMSS) HSS Internal Operations Council on Environmental Quality (CEQ) Office of Health, Safety and Security Collection Package Human Reliability Program OMB 1910-5122 Description of Collections 1. Human Reliability Program Certification (DOE F 470.3). Under the Department of Energy Human Reliability Program (HRP), individuals who are applicants for or incumbents in designated positions must be evaluated to ensure that they meet the requirements for certification in the program. This form documents that each part of the evaluation has been completed and records the determination by the HRP Certifying Official. The collection and documentation of this information is required by the HRP regulation found in the Code of Federal Regulations at 10 CFR 712. Form may be viewed at: http://energy.gov/cio/downloads/doe-f-4703

95

Microsoft Word - OMB_300_CF iManage _Rev 11_ 9-17-2009.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exhibit 300: Capital Asset Plan and Business Case Summary Exhibit 300: Capital Asset Plan and Business Case Summary Part I: Summary Information And Justification (All Capital Assets) Section A: Overview (All Capital Assets) 1. Date of Submission: 2. Agency: 3. Bureau: 4. Name of this Investment: 5. Unique Project (Investment) Identifier: (For IT investment only, see section 53.9. For all other, use agency ID system.) 6. What kind of investment will this be in FY 2011? (Please NOTE: Investments moving to O&M in FY 2011, with Planning/Acquisition activities prior to FY 2011 should not select O&M. These investments should indicate their current status.) 7. What was the first budget year this investment was submitted to OMB? 8. Provide a brief summary and justification for this investment, including a brief description of how this closes in part or in

96

C:\My Documents\FORMS\DOE F 551.1.cdr  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Section Section I - Traveler Information DOE F 551.1 (08-02) OMB Control No. 1910-1800 Replaces DOE F 1512.1 All Other Editions Are Obsolete U.S. DEPARTMENT OF ENERGY REQUEST FOR APPROVAL OF FOREIGN TRAVEL 1. Name (Last, First, Middle) 4. Birth Date (MO-DD-YYYY) 7. DOE Facility/Organization 11. Position/Title 13. Notes: 12a. Indicate whether you have held a DOE security clearance within the last 5 years. If yes, indicate the highest level received. ( ) Yes, please specify ( ) Top Secret ( ) Secret ( ) Q ( ) L ( ) No 12b. Indicate whether you have held any other security clearance within the last 5 years. If yes, enter agency and clearance level ( ) Yes, please specify Agency: Clearance: ( ) No 9. Employee Address: Street Address: City: 10. Contact Information State: Page 1 Zip: County: 8. Employee Type ( ) DOE Federal Employee ( ) Other Federal Employee ( ) Contractor ( ) Foreign National ( ) University Specify

97

Financial Risk, Policy & Controls | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Financial Risk, Policy & Controls Financial Risk, Policy & Controls Financial Risk, Policy & Controls The mission of the Office of Financial Risk, Policy and Controls (CF-50) is to contribute to the effective management of the financial resources of the Department of Energy by working in collaboration with our stakeholders, we will achieve the shared goal of continuous process improvement while complying with federal regulations. As stewards of taxpayers' money, we will be an objective source of internal controls expertise while providing the following functions: Internal Controls - Implement and maintain a complex-wide program for internal controls under the Federal Managers' Financial Integrity Act and OMB Circular A-123. Financial Policy - Establish and interpret Departmental accounting and

98

FY 2013 Control Table by Organization  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 Summary Control Table by Organization 3 Summary Control Table by Organization (dollars in thousands - OMB Scoring) FY 2011 FY 2012 FY 2013 Current Enacted Congressional Approp. Approp. * Request $ % Discretionary Summary By Organization Department Of Energy By Organization National Nuclear Security Administration Weapons Activities.............................................................................. 6,865,775 7,214,120 7,577,341 +363,221 +5.0% Defense Nuclear Nonproliferation........................................................ 2,281,371 2,295,880 2,458,631 +162,751 +7.1% Naval Reactors.................................................................................... 985,526 1,080,000 1,088,635 +8,635 +0.8% Office of the Administrator................................................................... 393,293 410,000 411,279

99

FY 2010 Control Table by Appropriation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Control Table by Appropriation Control Table by Appropriation (dollars in thousands - OMB Scoring) FY 2008 FY 2009 FY 2009 FY 2010 Current Current Current Congressional Approp. Approp. Recovery Request $ % Discretionary Summary By Appropriation Energy And Water Development, And Related Agencies Appropriation Summary: Energy Programs Energy efficiency and renewable energy.......................................... 1,704,112 2,178,540 16,800,000 2,318,602 +140,062 +6.4% Electricity delivery and energy reliability............................................ 136,170 137,000 4,500,000 208,008 +71,008 +51.8% Nuclear energy................................................................................... 960,903 792,000 -- 761,274 -30,726 -3.9% Legacy management.......................................................................... 33,872 -- -- --

100

FY 2012 Control Table by Organization  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 Summary Control Table by Organization 2 Summary Control Table by Organization (dollars in thousands - OMB Scoring) FY 2010 FY 2011 FY 2011 FY 2012 Current Congressional Annualized Congressional Approp. Request CR Request $ % Discretionary Summary By Organization Department Of Energy By Organization National Nuclear Security Administration Weapons Activities * ............................................................................. 6,386,371 7,008,835 7,008,835 7,629,716 +620,881 +8.9% Defense Nuclear Nonproliferation * ...................................................... 2,131,382 2,687,167 2,136,709 2,549,492 -137,675 -5.1% Naval Reactors * ................................................................................... 945,133 1,070,486 945,133 1,153,662 +83,176 +7.8% Office of the Administrator * ................................................................. 410,754 448,267 410,754 450,060

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

FY 2007 Control Table by Organization  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Control Table by Organization Control Table by Organization (dollars in thousands - OMB Scoring) FY 2005 FY 2006 FY 2007 Current Current Congressional Approp. Approp. Request $ % Discretionary Summary By Organization National Security Weapons................................................................................. 6,625,542 6,369,597 6,407,889 +38,292 +0.6% Defense Nuclear Nonproliferation.......................................... 1,507,966 1,614,839 1,726,213 +111,374 +6.9% Naval Reactors........................................................................ 801,437 781,605 795,133 +13,528 +1.7% Office of the Administrator...................................................... 363,350 338,450 386,576 +48,126 +14.2% Total, National Nuclear Security Administration........................ 9,298,295 9,104,491

102

FY 2009 Control Table by Organization  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9 Control Table by Organization 9 Control Table by Organization (dollars in thousands - OMB Scoring) FY 2007 FY 2008 FY 2009 Current Current Congressional Op. Plan Approp. Request $ % Discretionary Summary By Organization National Security Weapons................................................................................. 6,258,583 6,297,466 6,618,079 +320,613 +5.1% Defense Nuclear Nonproliferation........................................... 1,824,202 1,335,996 1,247,048 -88,948 -6.7% Naval Reactors....................................................................... 781,800 774,686 828,054 +53,368 +6.9% Office of the Administrator...................................................... 358,291 402,137 404,081 +1,944 +0.5% Total, National Nuclear Security Administration.......................

103

FY 2011 Control Table by Appropriation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Summary Control Table by Appropriation Summary Control Table by Appropriation (dollars in thousands - OMB Scoring) FY 2009 FY 2009 FY 2010 FY 2011 Current Current Current Congressional Approp. Recovery Approp. Request $ % Discretionary Summary By Appropriation Energy And Water Development, And Related Agencies Appropriation Summary: Energy Programs Energy efficiency and renewable energy........................................... 2,156,865 16,771,907 2,242,500 2,355,473 +112,973 +5.0% Electricity delivery and energy reliability............................................. 134,629 4,495,712 171,982 185,930 +13,948 +8.1% Nuclear energy................................................................................... 791,444 0 786,637 824,052 +37,415 +4.8% Fossil energy programs Clean coal technology..................................................................... 0 0 0 0

104

FY 2008 Control Table by Appriopriation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Control Table by Appropriation Control Table by Appropriation (dollars in thousands - OMB Scoring) FY 2006 FY 2007 FY 2008 Current Congressional Congressional Approp. Request Request $ % Discretionary Summary By Appropriation Energy And Water Development, And Related Agencies Appropriation Summary: Energy Programs Energy supply and Conservation..................................... 1,812,397 1,923,361 2,187,943 +264,582 +13.8% Fossil energy programs Clean coal technology................................................... -20,000 -- -58,000 -58,000 N/A Fossil energy research and development..................... 580,669 469,686 566,801 +97,115 +20.7% Naval petroleum and oil shale reserves........................ 21,285 18,810 17,301 -1,509 -8.0% Elk Hills school lands fund............................................

105

FY 2011 Control Table by Organization  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 Summary Control Table by Organization 1 Summary Control Table by Organization (dollars in thousands - OMB Scoring) FY 2009 FY 2009 FY 2010 FY 2011 Current Current Current Congressional Approp. Recovery Approp. Request $ % Discretionary Summary By Organization National Security Weapons................................................................................................. 6,410,000 0 6,384,431 7,008,835 +624,404 +9.8% Defense Nuclear Nonproliferation........................................................... 1,545,071 0 2,136,709 2,687,167 +550,458 +25.8% Naval Reactors........................................................................................ 828,054 0 945,133 1,070,486 +125,353 +13.3% Office of the Administrator....................................................................... 439,190 0 410,754 448,267

106

FY 2007 Control Table by Appropriation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Control Table by Appropriation Control Table by Appropriation (dollars in thousands - OMB Scoring) FY 2005 FY 2006 FY 2007 Current Current Congressional Approp. Approp. Request $ % Discretionary Summary By Appropriation Energy And Water Development, And Related Agencies Appropriation Summary: Energy Programs Energy supply and Conservation......................................... 1,801,815 1,812,627 1,923,361 +110,734 +6.1% Fossil energy programs Clean coal technology....................................................... -160,000 -20,000 -- +20,000 +100.0% Fossil energy research and development........................ 560,852 592,014 469,686 -122,328 -20.7% Naval petroleum and oil shale reserves........................... 17,750 21,285 18,810 -2,475 -11.6% Elk Hills school lands fund................................................

107

Microsoft Word - GRS Review_OMB White Paper - Real Property Right-sizing and Carbon Reduction August 7 2009 _2_.docx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Document - Submitted to OMB Document - Submitted to OMB August 7th, 2009 1 Whitepaper on Real Property Right-Sizing and Carbon Footprint Reduction Purpose: 1. The team (identified at the end of this document) was tasked by the Federal Real Property Council (FRPC) with identifying action-oriented goals, specific to the disposal of unneeded real property assets which will ultimately yield improved efficiency of operations. The goals related to the disposal of real property are part of a set of strategic goals to focus FRPC efforts under the new Administration and must be meaningful to the taxpayer. The objective of this tasking included: Establish a long-term, high impact "stretch" goal with enabling activities that lead to significant improvement to real property management.

108

DOE/EIS-0026-SA-03: Supplement Analysis for The Disposal of Certain Rocky Flats Plutonium-Bearing Materials at the Waste Isolation Pilot Plant (11/08/02)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Supplement Analysis For Disposal of Certain Rocky Flats Supplement Analysis For Disposal of Certain Rocky Flats Plutonium-Bearing Materials at the Waste Isolation Pilot Plant PURPOSE The U.S. Department of Energy (DOE) is proposing to revise its approach for managing approximately 0.97 metric tons (MT) of plutonium-bearing materials (containing about 0.18 MT of surplus plutonium) located at the Rocky Flats Environmental Technology Site (RFETS). DOE is proposing to repackage and transport these materials for direct disposal at the Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico. Several DOE environmental impact statements (EISs) discuss the potential impacts from different proposed alternatives for the storage and disposition of surplus plutonium and waste containing surplus plutonium. These EISs evaluated and presented the potential impacts for

109

Controller's 2006 annual report : fiscal year ending September 30, 2006.  

Science Conference Proceedings (OSTI)

I am pleased to present the CFO's FY06 Financial Report for Sandia National Laboratories (SNL). As a contractor to DOE and other government agencies, the bulk of SNL's revenue is from tax dollars. SNL's FY06 total revenue, total expenditures, and total employment levels were slightly below the FY05 record high levels. Throughout FY06, SNL business staff continued to improve SNL's financial stewardship of entrusted taxpayer funds through implementation of best-in-class practices in financial business operations and internal control policies and procedures to ensure compliance with all accounting standards and provide accountability to our customers. Our FY06 efforts focused on process certification and improvement, implementing OMB Circular A-123, achieving assurance activities, implementation of a Financial Management Competency Program throughout SNL, and continuous assessment of trends and emerging issues.

Crooks, Jennifer Shuk-Ian

2007-02-01T23:59:59.000Z

110

FY 2005 Control Table by Organization  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Organization Organization (dollars in thousands - OMB Scoring) Table of Contents Summary...................................................................................................... 1 Mandatory Funding....................................................................................... 2 National Nuclear Security Administration..................................................... 3 Energy Efficiency and Renewable Energy.................................................... 4 Electric Transmission and Distribution......................................................... 4 Fossil Energy................................................................................................ 5 Nuclear Energy, Science and Technology...................................................

111

FY 2005 Control Table by Appropriation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Appropriation Appropriation (dollars in thousands - OMB Scoring) Table of Contents Summary...................................................................................................... 1 Mandatory Funding....................................................................................... 3 Energy Supply.............................................................................................. 4 Non-Defense site acceleration completion................................................... 5 Uranium enrichment D&D fund.................................................................... 5 Non-Defense environmental services.......................................................... 5 Science.........................................................................................................

112

OMB No. 1905-0165 Expiration Date: 1/31/2013 Version No.:2011.01 ...  

U.S. Energy Information Administration (EIA)

If any Respondent Identification Data has changed since the last report, enter an "X" in the box: Company Name: Doing Business As: Site Name: Terminal Control Number ...

113

OMB No. 1905-0165 Version No.:xxxx.xx FORM EIA-819 MONTHLY ...  

U.S. Energy Information Administration (EIA)

If any Respondent Identification Data has changed since the last report, enter an "X" in the box: Company Name: Doing Business As: Site Name: Terminal Control Number ...

114

GC-859 Energy Information Administration Form Approved Revised (05/2013) U.S. DEPARTMENT OF ENERGY OMB NO. 1901-0287  

U.S. Energy Information Administration (EIA) Indexed Site

GC-859 Energy Information Administration Form Approved GC-859 Energy Information Administration Form Approved Revised (05/2013) U.S. DEPARTMENT OF ENERGY OMB NO. 1901-0287 Average Burden 67.5 Hours Expiration Date: 04/30/2016 NUCLEAR FUEL DATA SURVEY FORM GC-859 Legislative Authority: Data on this mandatory form are collected under authority of the Federal Energy Administration Act of 1974 (15 USC Schedule 761 et seq.), and the Nuclear Waste Policy Act of 1982, as amended (42 USC 10101 et seq.). Failure to file after receiving Energy Information Administration (EIA) notification may result in criminal fines, civil penalties and other sanctions as provided by the law. Data being collected on this form are not considered to be confidential. Title 18 U.S.C. 1001 makes it a criminal offense for any person knowingly and willingly to

115

Growth of SrTiO{sub 3}(110) film by oxide molecular beam epitaxy with feedback control  

SciTech Connect

By controlling the growth of complex oxide films with atomic precision, emergent phenomena and fascinating properties have been discovered, and even been manipulated. With oxide molecular beam epitaxy (OMBE) we grow high-quality SrTiO{sub 3}(110) films by evaporating Sr and Ti metals with separate controls of the open/close timing of the shutters. The incident electron beam angle of the reflective high energy electron diffraction (RHEED) is adjusted to make the (01) beam sensitive to surface chemical concentration. By monitoring such an intensity, we tune the shutter timing to synchronize the evaporation amount of Sr and Ti in real-time. The intensity is further used as a feedback control signal for automatic growth optimization to fully compensate the possible fluctuation of the source flux rates upon extended growth. A 22 nm-thick film is obtained with the precision of metal cation stoichiometry better than 0.5%.

Feng Jiagui; Yang Fang; Yang Yang; Gu Lin; Guo Jiandong [Beijing National Laboratory for Condensed-Matter Physics and Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Wang Zhiming [Beijing National Laboratory for Condensed-Matter Physics and Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Institute of Applied Physics, Vienna University of Technology, Wiedner Hauptstrasse 8-10/134, A-1040 Vienna (Austria); Zhang Jiandi [Department of Physics and Astronomy, Louisiana State University, Baton Rouge, LA 70808 (United States)

2012-12-15T23:59:59.000Z

116

Security and Privacy Controls for Federal Information Systems ...  

Science Conference Proceedings (OSTI)

... with the requirements of the Office of Management and Budget (OMB) Circular ... D-6 05-07-2013 Editorial Change SC-18 Priority Code from P1 to P2 ...

2013-05-08T23:59:59.000Z

117

2012 OMB Annual Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

National Technology Transfer and Advancement Act National Technology Transfer and Advancement Act Office of Management and Budget Report for FY-2012 Questions and Responses 1. Please describe the importance of standards in the achievement of your agency's mission, how your agency uses standards to deliver its primary services in support of its mission, and provide any examples or case studies of standards success. Please include relevant Internet links and links to your agency's standards website. The Department of Energy (DOE) relies heavily on voluntary consensus standards (VCSs) to fulfill its mission. DOE has a long history of working with the VCS community to develop standards that help DOE achieve its mission with regard to the safety, security, design, operations, and maintenance of its facilities. Where appropriate,

118

OMB Form 424A  

Science Conference Proceedings (OSTI)

... NOT RETURN YOUR COMPLETED FORM TO THE OFFICE OF MANAGEMENT AND BUDGET. ... In preparing the budget, adhere to any existing ...

2013-06-19T23:59:59.000Z

119

NTTAA 2010 OMB Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2010 Annual Report for The Department of Energy 1. Please describe the importance of standards in the achievement of your agency's mission, how your agency uses standards to deliver its primary services in support of its mission, and provide any examples or case studies of standards success. Please include relevant Internet links and links to your agency's standards website. The Department of Energy (DOE) uses voluntary consensus standards (VCSs) extensively in managing, operating, and implementing requirements applicable to its diverse sites, laboratories, operations, and facilities. The VCSs are used to support a wide range of program areas, including those addressing nuclear weapons and materials production, energy research, energy efficiency, oil storage, hydroelectric power, accelerator

120

Dream controller  

SciTech Connect

A method and apparatus for intelligently controlling continuous process variables. A Dream Controller comprises an Intelligent Engine mechanism and a number of Model-Free Adaptive (MFA) controllers, each of which is suitable to control a process with specific behaviors. The Intelligent Engine can automatically select the appropriate MFA controller and its parameters so that the Dream Controller can be easily used by people with limited control experience and those who do not have the time to commission, tune, and maintain automatic controllers.

Cheng, George Shu-Xing; Mulkey, Steven L; Wang, Qiang; Chow, Andrew J

2013-11-26T23:59:59.000Z

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

AVESTAR® - Control  

NLE Websites -- All DOE Office Websites (Extended Search)

Control Control AVESTAR control system efforts are focused on development of computational approaches for simulation and advanced controls for energy systems. Power generation technologies are growing more sophisticated and require control strategies and systems to be updated to allow plant owners to take full advantage of their increased capabilities. A well designed control system can provide the ability to hit and maintain setpoints without oscillation for optimum power plant operation. Implementation of complex control systems developed through advanced computational approaches will increase efficiency and reduce emissions. The AVESTAR team is focusing on the following three areas of process control research: 1) Plant-wide control system design, 2) Advanced regulatory control, and 3) Advanced process control. Process control models, methods, and tools are developed and applied to a wide variety of energy systems ranging from smart plant to smart grid.

122

Lighting Group: Controls: Wireless Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

Wireless Controls Wireless Lighting Control System (with DUST Networks) Objective The project objectives are to: 1. Demonstrate that wireless technology can be cost-effectively...

123

Institutional Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

Institutional Controls Institutional Controls Many major Federal laws (e.g., Atomic Energy Act (AEA), Resource Conservation Recovery Act (RCRA), Comprehensive Environmental Response, Compensation and Liability Act (CERCLA)), Executive Orders, regulations and various other drivers influence the use of institutional controls at DOE sites. Some drivers directly authorize or require the use of institutional controls, while others do not. DOE also uses institutional controls when no specific statutory requirement exists to supplement active remediation, pollution control, public and resource protection, and physical security, or to bolster the integrity of engineered remedies. DOE and its predecessor agencies have conducted activities for over 50 years, using land ownership and access control, environmental monitoring and surveillance, and other tools to support protection efforts at operational and inactive facilities, including radioactive waste burial grounds.

124

Load Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Visualization and Controls Peer Review Visualization and Controls Peer Review Load Control for System Reliability and Measurement-Based Stability Assessment Dan Trudnowski, PhD, PE Montana Tech Butte, MT 59701 dtrudnowski@mtech.edu 406-496-4681 October 2006 2 Presentation Outline * Introduction - Goals, Enabling technologies, Overview * Load Control - Activities, Status * Stability Assessment - Activities, Status * Wrap up - Related activities, Staff 3 Goals * Research and develop technologies to improve T&D reliability * Technologies - Real-time load control methodologies - Measurement-based stability-assessment 4 Enabling Technologies * Load control enabled by GridWise technology (e.g. PNNL's GridFriendly appliance) * Real-time stability assessment enabled by Phasor Measurement (PMU) technology 5 Project Overview * Time line: April 18, 2006 thru April 17, 2008

125

Smoke Control  

Science Conference Proceedings (OSTI)

... This was followed by the idea of the pressure sand- wich, ie, venting or exhausting the fire floor ... Smoke control is less dependent on tight barriers. ...

1996-08-14T23:59:59.000Z

126

ACCESS CONTROL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TERMSDEFINITIONS FROM DOE M 470.4-7 ACCESS CONTROL. The process of permitting access or denying access to information, facilities, nuclear materials, resources, or designated...

127

CONTROL ROD  

DOE Patents (OSTI)

This patent shows a method of making a fuel or control rod for a nuclear reactor. Fuel or control material is placed within a tube and plugs of porous metal wool are inserted at both ends. The metal wool is then compacted and the tube compressed around it as by swaging, thereby making the plugs liquid- impervious but gas-pervious. (AEC)

Walker, D.E.; Matras, S.

1963-04-30T23:59:59.000Z

128

REACTOR CONTROL  

DOE Patents (OSTI)

A control system employed with a high pressure gas cooled reactor in which a control rod is positioned for upward and downward movement into the neutron field from a position beneath the reactor is described. The control rod is positioned by a coupled piston cylinder releasably coupled to a power drive means and the pressurized coolant is directed against the lower side of the piston. The coolant pressure is offset by a higher fiuid pressure applied to the upper surface of the piston and means are provided for releasing the higher pressure on the upper side of the piston so that the pressure of the coolant drives the piston upwardly, forcing the coupled control rod into the ncutron field of the reactor. (AEC)

Fortescue, P.; Nicoll, D.

1962-04-24T23:59:59.000Z

129

FANS - Control  

Science Conference Proceedings (OSTI)

... If set to H+ and a magnet controller is connected, you are ... Typically motors 3, 4, 5, and 6 are fixed for FANS operation A fixed motor will not be ...

130

CONTROL SYSTEM  

DOE Patents (OSTI)

A boiling water type nuclear reactor power system having improved means of control is described. These means include provisions for either heating the coolant-moderator prior to entry into the reactor or shunting the coolantmoderator around the heating means in response to the demand from the heat engine. These provisions are in addition to means for withdrawing the control rods from the reactor. (AEC)

Shannon, R.H.; Williamson, H.E.

1962-10-30T23:59:59.000Z

131

Heliogyro Control  

E-Print Network (OSTI)

Heliogyros with blade length-to-width aspect ratios of 1000 can achieve ambitious science mission goals, but such designs have not been analyzed with rigor. Archived heliogyro analyses indicate that aspect ratios of 1000 are feasible, but the calculations supporting this claim are based on the simplifying assumptions of decoupled twist, vertical deflection, and in-plane deflection of the blades. In making such simplifications, the equations become more tractable, but crucial behavioral characteristics are possibly lost. Without a more rigorous analytical investigation, the reliability and robustness of the heliogyro remains in doubt. However, with verified control models and an appropriate operations strategy, performance of aggressive heliogyro designs can be presumed. This thesis asserts that heliogyro blades with aspect ratios of 1000:1 can sufficiently operate in space. The crux of this investigation is a high-fidelity model that accurately represents a heliogyro blade. Pitch controls command the thrust vector of the large sail structure. Although the validation model mimics a real solar sail, the controller is driven toward the most simplified configuration. The results of this research validate that a model-based controller that neglects blade twist, coning, and wrinkling can sufficiently control the thrust vector of a suitably designed heliogyro.

Richard S. Blomquist; Dimitrios Apostolopoulos; George Kantor; Andreas Von Flotow

2009-01-01T23:59:59.000Z

132

ACCESS CONTROL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TERMS/DEFINITIONS FROM DOE M 470.4-7 TERMS/DEFINITIONS FROM DOE M 470.4-7 ACCESS CONTROL. The process of permitting access or denying access to information, facilities, nuclear materials, resources, or designated security areas. ACCESS CONTROL MEASURES. Hardware and software features, physical controls, operating procedures, administrative procedures, and various combinations of these designed to detect or prevent unauthorized access to classified information; special nuclear materials; Government property; automated information systems, facilities, or materials; or areas containing the above and to enforce use of these measures to protect Departmental security and property interests. CRITICAL PATH SCENARIO. An adversary-based scenario that is generated during the conduct of a vulnerability assessment and accounts for adversary tactics that

133

Radiological Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-STD-1098-2008 October 2008 DOE STANDARD RADIOLOGICAL CONTROL U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. ii DOE-STD-1098-2008 This document is available on the Department of Energy Technical Standards Program Website at http://www.standards.doe.gov/ DOE-STD-1098-2008 Radiological Control DOE Policy October 2008 iii Foreword The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs. DOE has established regulatory requirements for occupational radiation protection in Title 10 of the Code of Federal

134

22681  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

STATE ENERGY PROGRAM (SEP) NARRATIVE INFORMATION WORKSHEET Grant Number: 1. Market (choose one): DOE F 540.1 (0805) OMB Control No. 1910-5126 Expiration Date:...

135

IT Capital Planning | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Management IT Services PKI Remote Access Training As defined by the Office of Management and Budget (OMB) Circular A-11, "Capital planning and investment control means the...

136

Recovery Act National Institute of Standards and Technology ...  

Science Conference Proceedings (OSTI)

... the Paperwork Reduction Act (PRA), unless that collection of information displays a currently valid Office of Management and Budget (OMB) Control ...

2010-10-05T23:59:59.000Z

137

47048 Federal Register /Vol. 77, No. 152/Tuesday, August 7, 2012 ...  

U.S. Energy Information Administration (EIA)

Power ProductionTariff Filings. OMB Control No.:19020213. Type of Request: Three-year extension of the FERC914 information collection

138

DOE Retrospective Review Plan Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Retrospective Review Plan Report May 2012 Agency Sub- agency RIN OMB Control Number Title of Initiative RulelCR Brief Description Actual or Target Completion Date...

139

Radiological Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-STD-1098-2008 October 2008 ------------------------------------- Change Notice 1 May 2009 DOE STANDARD RADIOLOGICAL CONTROL U.S. Department of Energy SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1098-2008 ii This document is available on the Department of Energy Technical Standards Program Website at http://www.standards.doe.gov/ iii DOE-STD-1098-2008 Change Notice 1: DOE-STD-1098-2008, Radiological Control Standard Section/page/paragraph Change Section 211, page 2-3, paragraph 1 Add new paragraph 1: "Approval by the appropriate Secretarial Officer or designee should be required

140

FY 2006 Control Table by Organization  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Organization Organization (dollars in thousands - OMB Scoring) FY 2004 FY 2005 FY 2006 Comparable Comparable Request to FY 2006 vs. FY 2005 Approp Approp Congress Discretionary Summary By Organization National Security Weapons........................................................................................ 6,447,159 6,583,350 6,630,133 +46,783 +0.7% Defense Nuclear Nonproliferation................................................... 1,367,709 1,422,103 1,637,239 +215,136 +15.1% Naval Reactors............................................................................... 761,872 801,437 786,000 -15,437 -1.9% Office of the Administrator.............................................................. 352,949 357,051 343,869 -13,182 -3.7% Other Defense Activities................................................................. -446 -- -- -- --

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

REACTOR CONTROL  

DOE Patents (OSTI)

This patent relates to nuclear reactors of the type which utilize elongited rod type fuel elements immersed in a liquid moderator and shows a design whereby control of the chain reaction is obtained by varying the amount of moderator or reflector material. A central tank for containing liquid moderator and fuel elements immersed therein is disposed within a surrounding outer tank providing an annular space between the two tanks. This annular space is filled with liquid moderator which functions as a reflector to reflect neutrons back into the central reactor tank to increase the reproduction ratio. Means are provided for circulating and cooling the moderator material in both tanks and additional means are provided for controlling separately the volume of moderator in each tank, which latter means may be operated automatically by a neutron density monitoring device. The patent also shows an arrangement for controlling the chain reaction by injecting and varying an amount of poisoning material in the moderator used in the reflector portion of the reactor.

Ruano, W.J.

1957-12-10T23:59:59.000Z

142

pdf Document (12k)  

Office of Legacy Management (LM)

Greg Lupton 2012-08-02T12:46:49Z 2012-08-02T12:49:49Z Greg Lupton 2012-08-02T12:46:49Z 2012-08-02T12:49:49Z  docProps/  xl/_rels/workbook.xml.rels  xl/_rels/  xl/calcChain.xml  xl/printerSettings/printerSettings1.bin f a l c o n F E R P C L o d X X L e t t e r SCPI IF0E FER PCL6 o d X X Letter H t d d o d Arial d d X d d d d d d d  xl/printerSettings/  xl/sharedStrings.xml 1st quarter 2nd quarter 3rd quarter 4th quarter Date placed Date removed Days in the field Transit control Deploy control Dose (mRem) Comments LOCATION DOSIMETER # 27 (Morgan) dosimeter lost in transit.  xl/styles.xml  xl/theme/theme1.xml  xl/theme/  xl/workbook.xml Data!$7:$7  xl/worksheets/_rels/sheet1.xml.rels  xl/worksheets/_rels/  xl/worksheets/sheet1.xml 0 1 2 3 4 40546 40637 40729 40819 5 40637 40729 40819 40911 6 C3-C2 91

143

Heliostat control  

DOE Patents (OSTI)

An improvement in a system and method of controlling heliostat in which the heliostat is operable in azimuth and elevation by respective stepper motors and including the respective steps or means for calculating the position for the heliostat to be at a commanded position, determining the number of steps in azimuth and elevation for each respective motor to get to the commanded position and energizing both the azimuth and elevation stepper motors to run in parallel until predetermined number of steps away from the closest commanded position in azimuth and elevation so that the closest position has been achieved, and thereafter energizing only the remaining motor to bring it to its commanded position. In this way, the heliostat can be started from a stowed position in the morning and operated by a computer means to its commanded position and kept correctly oriented throughout the day using only the time of the day without requiring the usual sensors and feedback apparatus. A computer, or microprocessor, can then control a plurality of many heliostats easily and efficiently throughout the day.

Kaehler, James A. (Littleton, CO)

1984-01-01T23:59:59.000Z

144

Federal Register Notice: Proposed Agency Information Collection |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

August 10, 2011 - 2:21pm August 10, 2011 - 2:21pm Addthis Federal Register Notice (PDF Version) on the DOE's invitation for public comment on its intent to request the Office of Management and Budget (OMB) to extend for four years the Information Collection Request Title: OE Recovery Act Financial Assistance Grants, OMB Control No. 1910-5149 that DOE is developing for submission to OMB pursuant to the Paperwork Reduction Act of 1995. Comments due on or before October 11, 2011. SUMMARY: The Department of Energy (DOE) invites public comment on DOE's intent to request OMB to renew Information Collection Request Title: OE Recovery Act Financial Assistance Grants, OMB Control No. 1910-5149 for an additional four years that DOE is developing for submission to the Office of Management and Budget (OMB) pursuant to the Paperwork Reduction

145

Fuzzy control of steam turbines  

Science Conference Proceedings (OSTI)

Keywords: PID control, comparison of PID and fuzzy control, fuzzy logic control, robustness, speed control, steam turbine control

N. Kiupel; P. M. Frank; O. Bux

1994-05-01T23:59:59.000Z

146

Controlled Synthesis  

NLE Websites -- All DOE Office Websites (Extended Search)

lUU lUU iIII---11111 q o m Controlled Synthesis of Polyenes by Catalytic Methods Progress Report for the period 12/01/92 - 11/30/93 Richard R. Schrock Five papers have appeared in the last year (see list at end), numbers 225,229, 233, 236, and 240. The living cyclopolymerization of dipropargyl derivatives has been reported for diethyl dipropargylmalonate (X = C(CO2Et)2; Scheme I; #225). We have found that c_ addition and [3 addition take place approximately to an equivalent degree, on the basis of the 13C NMR chemical shift for the quaternary carbon atom in the five or si×-membered ring, and in the presence of ethylene have isolated a molecule that contains a si×-membered ring that is formed when ethylene cleaves the cyclized species from the metal in a chain transfer-like reaction. On this basis also we can say that the polymer prepared from this monomer using classical catalysts contain

147

Lighting Group: Controls: Advanced Digital Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Digital Controls Advanced Digital Controls HPCBS Advanced Digital Controls Objective The goal of this project is to hasten the adoption of digital lighting control systems to allow commercial building operators to optimize the neergy performance of their lighting systems, implement demand responsive control, and improve occupant comfort and productivity. The specific objectives are as follows: (1) Advance the adoption of digital lighting control systems by working with industry to embed IBECS technology into existing analog control and DALI products, and by developing compelling demonstrations of digital control systems for evaluation by early adopters. (2) In collaboration with equipment manufacturers, produce digital lighting system prototypes that demonstrate the advantages of digitally controlled lighting systems to innovative property managers and other energy stakeholders. A digitally controlled lighting system consists of lights that are individually controllable via a network. The advantages of digital control are:

148

Recovery Act Federal Register Notices | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Information Center » Recovery Act » Recovery Act Federal Register Information Center » Recovery Act » Recovery Act Federal Register Notices Recovery Act Federal Register Notices October 12, 2011 Federal Register Notice (PDF Version) on the DOE's invitation for public comment on its request to the Office of Management and Budget (OMB) to extend for three years the Information Collection Request Title: OE Recovery Act Financial Assistance Grants, OMB Control No. 1910-5149 that DOE is developing for submission to OMB pursuant to the Paperwork Reduction Act of 1995. Comments due on or before November 7, 2011. OMB Form 83-I. ICR Supporting Statement. SGIG Reporting Guidance. Notice of OMB Action (January 10, 2012): OMB has approved DOE's request to extend information collection for three years. August 10, 2011 Federal Register Notice (PDF Version ) on the DOE's invitation for

149

Robotics Control using Active Disturbance Rejection Control.  

E-Print Network (OSTI)

??Conventional robotics control has been set in stone since the sixties. The world has been waiting too long for a new age of control to (more)

Khairallah, Ousama Said

2009-01-01T23:59:59.000Z

150

Change Log  

NLE Websites -- All DOE Office Websites (Extended Search)

Change Log Change Log Change Log NERSC-8 / Trinity Benchmarks Change Log 09/03/2013 Correction applied to MiniDFT web-page (to remove inconsistency with MiniDFT README). Capability Improvement measurements do not require 10,000 MPI ranks per k-point. 08/06/2013 Various pages have changed to remove "draft" status 08/02/2013 Correction added to FLOP Counts for "Small" Single-Node Miniapplication Tests page 07/12/2013 README files updated for IOR benchmark to correct an error in wording (no code changes); README file updated for osu-micro-benchmarks (OMB) changing the tests required and conditions including reinserting some tests that had been deleted earlier 07/05/2013 README updated for mpimemu benchmark; Revised version of benchmark results spreadsheet (linked on SSP web page);

151

Computer/Controller 1588  

Science Conference Proceedings (OSTI)

... Computer/Controller? What is a computer or controller? ... Computer/controllers in a system supporting IEEE 1588 will typically include a 1588 clock. ...

2010-10-29T23:59:59.000Z

152

Strong Analytic Controllability for Hydrogen Control Systems  

E-Print Network (OSTI)

The realization and representation of so(4,2) associated with the hydrogen atom Hamiltonian are derived. By choosing operators from the realization of so(4,2) as interacting Hamiltonians, a hydrogen atom control system is constructed, and it is proved that this control system is strongly analytically controllable based on a time-dependent strong analytic controllability theorem.

Chunhua Lan; Tzyh-Jong Tarn; Quo-Shin Chi; John W. Clark

2004-09-22T23:59:59.000Z

153

Incoherent Control of Locally Controllable Quantum Systems  

E-Print Network (OSTI)

An incoherent control scheme for state control of locally controllable quantum systems is proposed. This scheme includes three steps: (1) amplitude amplification of the initial state by a suitable unitary transformation, (2) projective measurement on the amplified state, and (3) final optimization by a unitary controlled transformation. The first step increases the amplitudes of some desired eigenstates and the corresponding probability of observing these eigenstates, the second step projects, with high probability, the amplified state into a desired eigenstate, and the last step steers this eigenstate into the target state. Within this scheme, two control algorithms are presented for two classes of quantum systems. As an example, the incoherent control scheme is applied to the control of a hydrogen atom by an external field. The results support the suggestion that projective measurements can serve as an effective control and local controllability information can be used to design control laws for quantum systems. Thus, this scheme establishes a subtle connection between control design and controllability analysis of quantum systems and provides an effective engineering approach for controlling quantum systems with partial controllability information.

Daoyi Dong; Chenbin Zhang; Herschel Rabitz; Alexander Pechen; Tzyh-Jong Tarn

2008-10-21T23:59:59.000Z

154

Grinding circuit control using programmable logic controllers  

Science Conference Proceedings (OSTI)

This paper presents an application for cement milling system. In this application the process is controlled by software running on Programmable Logic Controllers. The appliance used to observe industrial process show the following mill parameters: feed ... Keywords: PLC programming, ball mill, clinker grinding, grinding circuit, programmable logic controllers

Costea R. Claudiu; Silaghi Helga Maria; Rohde L. Ulrich; Silaghi A. Marius

2011-08-01T23:59:59.000Z

155

Controller synthesis for networked control systems  

Science Conference Proceedings (OSTI)

This paper presents a discrete-time model for networked control systems (NCSs) that incorporates all network phenomena: time-varying sampling intervals, packet dropouts and time-varying delays that may be both smaller and larger than the sampling interval. ... Keywords: Linear matrix inequalities, Networked control systems, Sampled-data control, Stability analysis, Time-varying delay

M. B. G. Cloosterman; L. Hetel; N. van de Wouw; W. P. M. H. Heemels; J. Daafouz; H. Nijmeijer

2010-10-01T23:59:59.000Z

156

FY 2006 Control Table by Appropriation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Appropriation Appropriation (dollars in thousands - OMB Scoring) FY 2004 FY 2005 FY 2006 Comparable Comparable Request to FY 2006 vs. FY 2005 Approp Approp Congress Discretionary Summary By Appropriation Energy And Water Development Appropriation Summary: Energy Programs Energy supply.......................................................................... 794,897 932,319 902,674 -29,645 -3.2% Non-Defense site acceleration completion............................... 167,272 157,316 172,400 15,084 +9.6% Uranium enrichment D&D fund................................................ 414,027 495,015 591,498 96,483 +19.5% Non-Defense environmental services...................................... 307,795 288,966 177,534 -111,432 -38.6% Science.................................................................................... 3,536,373 3,599,546 3,462,718 -136,828 -3.8%

157

Issued April 5, 2013 U.S. DEPARTMENT OF ENERGY  

E-Print Network (OSTI)

programs. Following the publication of the GAO Standards, the Office of Management and Budget (OMB) issued to follow in implementing internal control programs. In 1995, OMB revised Circular A-123 to require internal the improvement of program effectiveness and accountability. This revision required agencies to transmit a single

158

NOTICE OF OFFICE OF MANAGEMENT AND BUDGET ACTION  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2/26/2010 2/26/2010 Department of Energy Office of Administration FOR CERTIFYING OFFICIAL: Tom Pyke FOR CLEARANCE OFFICER: Christina Rouleau In accordance with the Paperwork Reduction Act, OMB has taken action on your request received 12/22/2009 ACTION REQUESTED: New collection (Request for a new OMB Control Number) TYPE OF REVIEW REQUESTED: Emergency ICR REFERENCE NUMBER: 200912-1910-010 AGENCY ICR TRACKING NUMBER: Jaime Carlson-OE TITLE: OE Recovery Act Financial Assistance Grants LIST OF INFORMATION COLLECTIONS: See next page OMB ACTION: Approved with change OMB CONTROL NUMBER: 1910-5149 The agency is required to display the OMB Control Number and inform respondents of its legal significance in accordance with 5 CFR 1320.5(b). EXPIRATION DATE: 08/31/2010 DISCONTINUE DATE:

159

Superconducting VAR control  

DOE Patents (OSTI)

Static VAR control means employing an asymmetrically controlled Graetz bridge and a superconducting direct current coil having low losses and low cost characteristics.

Boenig, Heinrich J. (Los Alamos, NM); Hassenzahl, William V. (Piedmont, CA)

1982-01-01T23:59:59.000Z

160

CONTROL LIMITER DEVICE  

DOE Patents (OSTI)

A control-limiting device for monltoring a control system is described. The system comprises a conditionsensing device, a condition-varying device exerting a control over the condition, and a control means to actuate the condition-varying device. A control-limiting device integrates the total movement or other change of the condition-varying device over any interval of time during a continuum of overlapping periods of time, and if the tothl movement or change of the condition-varying device exceeds a preset value, the control- limiting device will switch the control of the operated apparatus from automatic to manual control.

DeShong, J.A.

1960-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Quantum Multiobservable Control  

E-Print Network (OSTI)

We present deterministic algorithms for the simultaneous control of an arbitrary number of quantum observables. Unlike optimal control approaches based on cost function optimization, quantum multiobservable tracking control (MOTC) is capable of tracking predetermined homotopic trajectories to target expectation values in the space of multiobservables. The convergence of these algorithms is facilitated by the favorable critical topology of quantum control landscapes. Fundamental properties of quantum multiobservable control landscapes that underlie the efficiency of MOTC, including the multiobservable controllability Gramian, are introduced. The effects of multiple control objectives on the structure and complexity of optimal fields are examined. With minor modifications, the techniques described herein can be applied to general quantum multiobjective control problems.

Raj Chakrabarti; Rebing Wu; Herschel Rabitz

2008-05-12T23:59:59.000Z

162

Control of Customer Property  

NLE Websites -- All DOE Office Websites (Extended Search)

5 EOTA Inventory Control Process 110620.doc110620 Page 1 of 6 EOTA - Business Process Document Title: EOTA Inventory Control Process Document Number: MGTP-005 Rev. 110620...

163

NSLS Work Planning & Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

Work Planning & Controls NSLS Work Planning and Control Procedure Lead Working Guidelines Information on Working in Areas Subject to Radiation from VUV Injection Procedure for...

164

Air Pollution Control (Indiana)  

Energy.gov (U.S. Department of Energy (DOE))

This legislation establishes the Department of Environmental Management and the Air Pollution Control Board, which are tasked with the prevention, abatement, and control of air pollution by all...

165

Personal Universal Controllers: Controlling Complex Appliances with . . .  

E-Print Network (OSTI)

We envision a future where each person will carry with them a personal universal controller (PUC), a portable computerized device that allows the user to control any appliance within their environment. The PUC has a two-way communication channel with each appliance. It downloads a specification of the appliance's features and then automatically generates an interface for controlling that appliance (graphical, speech, or both). In this demonstration we present a working PUC system that automatically generates graphical and speech interfaces, and controls real appliances, including a shelf stereo and a Sony camcorder.

Jeffrey Nichols; Brad A. Myers; Michael Higgins; Joseph Hughes; Thomas K. Harris; Roni Rosenfeld; Kevin Litwack

2003-01-01T23:59:59.000Z

166

NSLS Controls & Diagnostics  

NLE Websites -- All DOE Office Websites (Extended Search)

Controls & Diagnostics Systems Other Projects and Responsibilities WebDAQs Presentations Papers Tech Notes...

167

Control physical models  

Science Conference Proceedings (OSTI)

This paper describes design of model physical model of rectification column. Physical model is appointed as a demonstration system control for distillation by means of control system SIMATIC PCS7 from company SIEMENS. The SIMATIC PCS7 Process control ... Keywords: description, distillation, physical model, process control system

Tom Dvo?k; Jan Blek

2005-03-01T23:59:59.000Z

168

HYDRAULIC SERVO CONTROL MECHANISM  

DOE Patents (OSTI)

A hydraulic servo control mechanism of compact construction and low fluid requirements is described. The mechanism consists of a main hydraulic piston, comprising the drive output, which is connected mechanically for feedback purposes to a servo control piston. A control sleeve having control slots for the system encloses the servo piston, which acts to cover or uncover the slots as a means of controlling the operation of the system. This operation permits only a small amount of fluid to regulate the operation of the mechanism, which, as a result, is compact and relatively light. This mechanism is particuiarly adaptable to the drive and control of control rods in nuclear reactors. (auth)

Hussey, R.B.; Gottsche, M.J. Jr.

1963-09-17T23:59:59.000Z

169

Nuclear reactor control apparatus  

DOE Patents (OSTI)

Nuclear reactor core safety rod release apparatus comprises a control rod having a detent notch in the form of an annular peripheral recess at its upper end, a control rod support tube for raising and lowering the control rod under normal conditions, latches pivotally mounted on the control support tube with free ends thereof normally disposed in the recess in the control rod, and cam means for pivoting the latches out of the recess in the control rod when a scram condition occurs. One embodiment of the invention comprises an additional magnetically-operated latch for releasing the control rod under two different conditions, one involving seismic shock.

Sridhar, Bettadapur N. (Cupertino, CA)

1983-11-01T23:59:59.000Z

170

Document Control Process  

NLE Websites -- All DOE Office Websites (Extended Search)

1 Document Control Process 11_0304 Page 1 of 7 1 Document Control Process 11_0304 Page 1 of 7 EOTA - Business Process Document Title: Document Control Process Document Number: P-001 Rev 11_0304 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: Q-001, Quality Manual Notify of Changes: EOTA Employees Referenced Document(s): F-001 Document Control Template - Process, F-002 Document Control Template - Instruction, F-003 Document Control Template - Screenshot, F-004 Document Control Template - Form, F-005 Document Control Template - Form - Excel, MGTP-002 Skill Set Model, Q-003 EOTA Processes: Sequence and Interaction, P-003, Control of Records P-001 Document Control Process 11_0304 Page 2 of 7 Revision History: Rev. Description of Change

171

Control rod drive  

DOE Patents (OSTI)

A control rod drive uses gravitational forces to insert one or more control rods upwardly into a reactor core from beneath the reactor core under emergency conditions. The preferred control rod drive includes a vertically movable weight and a mechanism operatively associating the weight with the control rod so that downward movement of the weight is translated into upward movement of the control rod. The preferred control rod drive further includes an electric motor for driving the control rods under normal conditions, an electrically actuated clutch which automatically disengages the motor during a power failure and a decelerator for bringing the control rod to a controlled stop when it is inserted under emergency conditions into a reactor core.

Hawke, Basil C. (Solana Beach, CA)

1986-01-01T23:59:59.000Z

172

Strategic Trade Control: Multilateral Export Control Arrangements  

NLE Websites -- All DOE Office Websites (Extended Search)

Multilateral Multilateral Export Control Arrangements Nonproliferation & National Security (NPNS) Overview Technical Nonproliferation Policy Support Strategic Trade Control Review of export license applications Multilateral Export Control Arrangements Interdiction Engagement & Training INECP INSEP GIPP Safeguards Concepts and Approaches Human Capital Development Additional Protocol Technical Assistance National Security Systems & Assessments National Security Information Systems Vulnerability Assessment Team (VAT) Radiation Detection & Response (RDR) Contact NPNS Other Major Programs Work with Argonne Contact us For Employees Site Map Help Join us on Facebook Follow us on Twitter NE Division on Flickr Nonproliferation and National Security Program Technical Nonproliferation Policy Support (TNPS)

173

CONTROL ROD DRIVE  

DOE Patents (OSTI)

Accurate and controlled drive for the control rod is from an electric motor. A hydraulic arrangement is provided to balance a piston against which a control rod is urged by the application of fluid pressure. The electric motor drive of the control rod for normal operation is made through the aforementioned piston. In the event scramming is required, the fluid pressure urging the control rod against the piston is relieved and an opposite fluid pressure is applied. The lack of mechanical connection between the electric motor and control rod facilitates the scramming operation.

Chapellier, R.A.; Rogers, I.

1961-06-27T23:59:59.000Z

174

Control system design method  

Science Conference Proceedings (OSTI)

A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

Wilson, David G. (Tijeras, NM); Robinett, III, Rush D. (Tijeras, NM)

2012-02-21T23:59:59.000Z

175

Appendix B - Control Points  

NLE Websites -- All DOE Office Websites (Extended Search)

B B Control Points B.1 Injector Control Points Qty Type Device 2 Magnet Bend magnet - DL1 bend 9 Magnet Quad magnet 10 Magnet X-Y Corrector Pair 2 Magnet Solenoid 2 Magnet...

176

Control of Customer Property  

NLE Websites -- All DOE Office Websites (Extended Search)

Report of Lost, Damaged, Destroyed or Stolen (RLDDS) Property, MGTP-005 EOTA Inventory Process, MGTP-006 for control of EOTA issued key(s) MGTP-003 Control of Customer...

177

Solar control design package  

DOE Green Energy (OSTI)

Information used in the evaluation of design of Solar Control's solar heating and cooling system controller and the Solarstat is presented. System performance specifications, design data brochures, and detailed design drawings are presented.

Not Available

1978-08-01T23:59:59.000Z

178

Portable controls experiments  

E-Print Network (OSTI)

Experiments for controls classes like MIT's 2.004 require large lab setups and expensive equipment such as oscilloscopes and function generators. We developed a series of controls experiments based on National Instruments' ...

Larson, Richard Winston

2012-01-01T23:59:59.000Z

179

Open Architecture Control  

Science Conference Proceedings (OSTI)

... Forum, Orlando, FL, January 2004. I-4 Regional Meeting: Process Control Security, ExxonMobil Research and Engineering ...

2007-09-26T23:59:59.000Z

180

Networked Control Systems Group  

Science Conference Proceedings (OSTI)

... and deploys measurement science for sensor networks and control systems used in manufacturing, construction, and other cyber-physical systems ...

2012-08-30T23:59:59.000Z

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Simplified distillation column controls  

SciTech Connect

A simple, energy efficient method of controlling single or double distillation columns for the production of ethyl alcohol is described. The control system is based on a material balance scheme centered around a thermostat actuated control valve to regulate reflux rate and product purity. Column bottom's levels are automatically regulated by vented suction lines on the pump inlets. Methods of minimizing control input variations are used including column insulation, stillage-to-beer heat exchanger, and a steam pressure regulator.

Badger, P.; Pile, R.; Lightsey, G.

1984-01-01T23:59:59.000Z

182

Control of Test Conduct  

NLE Websites -- All DOE Office Websites (Extended Search)

2 Revision 1 Effective June 2008 Control of Test Conduct Prepared by Electric Transportation Applications Prepared by: Date: Garrett P....

183

Lighting Control Systems  

Science Conference Proceedings (OSTI)

The demand for lighting control systems in residential, commercial, and industrial facilities is on the rise with the demand for increased energy savings. With lighting accounting for almost 23% of grid load, there is significant opportunity to reduce lighting load while improving the quality of light for customers. Lighting control systems are becoming more intelligent as the need for them to interface with building control systems and demand response systems also increases. Lighting control systems use...

2009-12-17T23:59:59.000Z

184

Informal Control code logic  

E-Print Network (OSTI)

General definitions as well as rules of reasoning regarding control code production, distribution, deployment, and usage are described. The role of testing, trust, confidence and risk analysis is considered. A rationale for control code testing is sought and found for the case of safety critical embedded control code.

Bergstra, Jan A

2010-01-01T23:59:59.000Z

185

Federal Register Notice: Proposed Agency Information Collection |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

October 11, 2011 - 10:57am October 11, 2011 - 10:57am Addthis Federal Register Notice (PDF Version) on the DOE's invitation for public comment on its request to the Office of Management and Budget (OMB) to extend for three years the Information Collection Request Title: OE Recovery Act Financial Assistance Grants, OMB Control No. 1910-5149 that DOE is developing for submission to OMB pursuant to the Paperwork Reduction Act of 1995. Comments due on or before November 7, 2011. OMB Form 83-I (PDF 70 KB). ICR Supporting Statement (PDF 85 KB). SGIG Reporting Guidance (PDF 99 KB). SUMMARY: The Department of Energy (DOE) invites public comment on DOE's request the Office of Management and Budget (OMB) to extend for three years the emergency Information Collection Request Title: OE Recovery Act

186

CONTROL FOR NEUTRONIC REACTOR  

DOE Patents (OSTI)

S>A control rod operating device in a nuclear reactor of the type in which the control rod is gradually withdrawn from the reactor to a position desired during stable operation is described. The apparatus is comprised essentially of a stop member movable in the direction of withdrawal of the control rod, a follower on the control rod engageable with the stop and means urging the follower against the stop in the direction of withdrawal. A means responsive to disengagement of the follower from the stop is provided for actuating the control rod to return to the reactor shut-down position.

Lichtenberger, H.V.; Cameron, R.A.

1959-03-31T23:59:59.000Z

187

Water heater control module  

DOE Patents (OSTI)

An advanced electric water heater control system that interfaces with a high temperature cut-off thermostat and an upper regulating thermostat. The system includes a control module that is electrically connected to the high-temperature cut-off thermostat and the upper regulating thermostat. The control module includes a switch to open or close the high-temperature cut-off thermostat and the upper regulating thermostat. The control module further includes circuitry configured to control said switch in response to a signal selected from the group of an autonomous signal, a communicated signal, and combinations thereof.

Hammerstrom, Donald J

2013-11-26T23:59:59.000Z

188

Paperwork Reduction Act Submission (OMB 83-I)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PA PA PERW ORK REDUCTION A CT SUBM ISSION to: . 1. Agency/Subagency originating request b. None - a. a. a. Regular b. b. / / c. c. Delegated d. e. Yes N o f. a. b. / Yes N o 7. Title (Mark primary with "P" and all others that apply with "X") (Mark primary with "P" and all others that apply with "X") a. d. a. Voluntary b. e. b. c. f. c. % a. b. a. e. c. Reporting b. f. Research 1. 2. 3. c. General purpose statistics g. Regulatory or compliance 4. Quarterly 5. 6. d. 7. Biennially 8. Yes N o Phone: Please read the instructions before completing this form. For additional forms or assistance in completing this form, contact your agency's Paperwork Clearance Officer. Send two copies of this form, the collection instrument to be reviewed, the Supporting Statement, and any additional documentation

189

OMB Workshop Federal Participation in VCS  

Science Conference Proceedings (OSTI)

... no on-site registration available. Technical Contact: Jasmeet Seehra Office of Management and Budget. 202-395-3123.

2013-06-12T23:59:59.000Z

190

DOE FAIR 2007 (OMB).xls  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PI DC Washington US 1 T820 C A 2005 9976 19-60 PI DC Washington US 1 T821 I Z 1999 9977 19-60 PI DC Washington US 1 T820 C B 1999 9978 19-60 PI DC Washington US 1 T821 C A...

191

NOAA Form 370 OMB#: 0648-0335  

E-Print Network (OSTI)

-End Vessel Name 5. DOLPHIN SAFE STATUS - check the statement that applies. A. The tuna or tuna products. B. The tuna or tuna products described herein are certified to be dolphin safe: (1) Tuna Administrator as causing a regular and significant mortality or serious injury to dolphins. (2) Tuna harvested

192

Paperwork Reduction Act Submission (OMB 83-I)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Keywords 10. Abstract 11. Affected public 12. Obligation to respond Individuals or households F a rm s Bus iness or othe r for-pro fit Federal Government Required to obtain or...

193

OMB CIRCULAR A-133 COMPLIANCE SUPPLEMENT  

E-Print Network (OSTI)

and changing programs that have been in existence for decades. Aid for Families with Dependent Children (AFDC will begin to replace such welfare terms as AFDC, food stamps and social insurance. Welfare reform dramatically im- prove their earning potential. In California, for example, AFDC recipients who completed a de

McQuade, D. Tyler

194

Control of Customer Property  

NLE Websites -- All DOE Office Websites (Extended Search)

6 EOTA Key Control Process 11_0119.docx1_0119 6 EOTA Key Control Process 11_0119.docx1_0119 Page 1 of 5 EOTA - Business Process Document Title: EOTA Key Control Process Document Number: MGTP-006 Rev. 11_0119 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: MGTP-003 Control of Customer Property Notify of Changes: EOTA Employees Referenced Document(s): MGTF-012 Key Check-Out Form MGTP-006 EOTA Key Control Process 11_0119.docx1_0119 Page 2 of 5 Revision History: Rev. Description of Change 10_0823 Initial Release 11_0119 Modified process to include steps to take if an employee does not return a key. MGTP-006 EOTA Key Control Process 11_0119.docx1_0119 Page 3 of 5 I. Purpose To establish a process for control of all EOTA keys.

195

CRUCIFORM CONTROL ROD JOINT  

DOE Patents (OSTI)

An invention is described which relates to nuclear reactor control rod components and more particularly to a joint between cruciform control rod members and cruciform control rod follower members. In one embodiment this invention provides interfitting crossed arms at adjacent ends of a control rod and its follower in abutting relation. This holds the members against relative opposite longitudinal movement while a compression member keys the arms against relative opposite rotation around a common axis. Means are also provided for centering the control rod and its follower on a common axis and for selectively releasing the control rod from its follower for the insertion of a replacement of the control rod and reuse of the follower. (AEC)

Thorp, A.G. II

1962-08-01T23:59:59.000Z

196

One Controlling Many  

NLE Websites -- All DOE Office Websites (Extended Search)

One Controlling Many One Controlling Many As Unmanned Systems proliferate the battle space, the decisive advantages historically provided by strategy, tactics, and training must be translated into Unmanned Systems (UMS) Control Systems. It is a challenge to effectively control large numbers of UMS. The human operator must be freed to focus on high level perception, tactics, and strategy while the system automates lower level functions. The Intelligent Systems, Robotics, and Cybernetics (ISRC) Group at Sandia National Laboratories is working to develop a controls system for single-operator multiple unmanned systems control. Critical Characteristics * A single operator controls a heterogeneous team of several (three to six) unmanned ground (UGVs) and aerial vehicles (UAVs) performing multiple

197

Modeling and control of thermostatically controlled loads  

SciTech Connect

As the penetration of intermittent energy sources grows substantially, loads will be required to play an increasingly important role in compensating the fast time-scale fluctuations in generated power. Recent numerical modeling of thermostatically controlled loads (TCLs) has demonstrated that such load following is feasible, but analytical models that satisfactorily quantify the aggregate power consumption of a group of TCLs are desired to enable controller design. We develop such a model for the aggregate power response of a homogeneous population of TCLs to uniform variation of all TCL setpoints. A linearized model of the response is derived, and a linear quadratic regulator (LQR) has been designed. Using the TCL setpoint as the control input, the LQR enables aggregate power to track reference signals that exhibit step, ramp and sinusoidal variations. Although much of the work assumes a homogeneous population of TCLs with deterministic dynamics, we also propose a method for probing the dynamics of systems where load characteristics are not well known.

Backhaus, Scott N [Los Alamos National Laboratory; Sinitsyn, Nikolai [Los Alamos National Laboratory; Kundu, S. [UNIV OF MICHIGAN; Hiskens, I. [UNIV OF MICHIGAN

2011-01-04T23:59:59.000Z

198

Impacts of NOx Controls on Mercury Controllability  

Science Conference Proceedings (OSTI)

Past tests have led researchers and air pollution regulators to hypothesize that nitrogen oxides (NOx) controls can enhance mercury capture by particulate collection devices and sulfur dioxide (SO2) scrubbers. This technology review presents results obtained to date from a comprehensive program designed to confirm, qualify, and quantify these hypotheses.

2002-03-13T23:59:59.000Z

199

Air Pollution Control Regulations: No.27 - Control of Nitrogen...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

27 - Control of Nitrogen Oxide Emissions (Rhode Island) Air Pollution Control Regulations: No.27 - Control of Nitrogen Oxide Emissions (Rhode Island) Eligibility Commercial...

200

NETL: Mercury Emissions Control  

NLE Websites -- All DOE Office Websites (Extended Search)

Home > Technologies > Coal & Power Systems > Innovations for Existing Plants > Mercury Emissions Control Home > Technologies > Coal & Power Systems > Innovations for Existing Plants > Mercury Emissions Control Innovations for Existing Plants Mercury Emissions Control NETL managed the largest funded research program in the country to develop an in-depth understanding of fossil combustion-based mercury emissions. The program goal was to develop effective control options that would allow generators to comply with regulations. Research focus areas included measurement and characterization of mercury emissions, as well as the development of cost-effective control technologies for the U.S. coal-fired electric generating industry. Control Technologies Field Testing Phase I & II Phase III Novel Concepts APCD Co-benefits Emissions Characterization

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

CHSP: HAZARD CONTROLS  

NLE Websites -- All DOE Office Websites (Extended Search)

HYGIENE HYGIENE AND SAFETY PLAN CHSP SITE MAP HAZARD CONTROLS CONTROLS FOR HAZARDOUS MATERIALS arrow image WORK PRACTICE CONTROLS arrow image CHEMICAL STORAGE GUIDELINES DECOMISSIONING LAB AND SHOP SPACES SPECIFIC CONTROLS AND PROCEDURES arrow image EMERGENCY PROCEDURES AND EQUIPMENT arrow image APPENDICES arrow image FAQs QUESTIONS Search the CHSP: > Go spacer image EH&S Home PUB 3000 LBNL Home LBNL A-Z Index LBNL Search LBNL Phone Book Privacy & Security Notice spacer spacer image spacer image spacer image HAZARD CONTROLS This section discusses control procedures for limiting employee exposure to chemical hazards. Technical Areas Technical areas include laboratories, shops, workrooms, and similar areas where non-administrative activities are performed. For the purpose of the

202

Nuclear reactor control  

DOE Patents (OSTI)

1. In a nuclear reactor incorporating a plurality of columns of tubular fuel elements disposed in horizontal tubes in a mass of graphite wherein water flows through the tubes to cool the fuel elements, the improvement comprising at least one control column disposed in a horizontal tube including fewer fuel elements than in a normal column of fuel elements and tubular control elements disposed at both ends of said control column, and means for varying the horizontal displacement of the control column comprising a winch at the upstream end of the control column and a cable extending through the fuel and control elements and attached to the element at the downstream end of the column.

Cawley, William E. (Phoenix, AZ); Warnick, Robert F. (Pasco, WA)

1982-01-01T23:59:59.000Z

203

Programmable Logic Controllers  

E-Print Network (OSTI)

Programmable Logic Controllers (PLCs) drive the behavior of industrial control systems according to uploaded programs. It is now known that PLCs are vulnerable to the uploading of malicious code that can have severe physical consequences. What is not understood is whether an adversary with no knowledge of the PLCs interface to the control system can execute a damaging, targeted, or stealthy attack against a control system using the PLC. In this paper, we present SABOT, a tool that automatically maps the control instructions in a PLC to an adversary-provided specification of the target control systems behavior. This mapping recovers sufficient semantics of the PLCs internal layout to instantiate arbitrary malicious controller code. This lowers the prerequisite knowledge needed to tailor an attack to a control system. SABOT uses an incremental model checking algorithm to map a few plant devices at a time, until a mapping is found for all adversary-specified devices. At this point, a malicious payload can be compiled and uploaded to the PLC. Our evaluation shows that SABOT correctly compiles payloads for all tested control systems when the adversary correctly specifies full system behavior, and for 4 out of 5 systems in most cases where there where unspecified features. Furthermore, SABOT completed all analyses in under 2 minutes.

Stephen Mclaughlin; Patrick Mcdaniel; Stephen Mclaughlin; Patrick Mcdaniel

2012-01-01T23:59:59.000Z

204

Ice maker safety control  

Science Conference Proceedings (OSTI)

In a refrigeration apparatus including an evaporator, a defrost heater for defrosting the evaporator, a defrost thermostat having a switch for de-energizing the defrost heater at a preselected high temperature of the evaporator, and an ice making apparatus having a mold, a mold heater, and a control circuit controllably energized the mold heater, a safety control for the ice making apparatus is described comprising: means for thermally coupling the defrost thermostat with the mold; and means electrically connecting the defrost thermostat switch with the control circuit for de-energizing the mold heater at a preselected high temperature of the mold to prevent overheating thereof.

Linstromberg, W.J.

1988-05-03T23:59:59.000Z

205

Fluctuations and Nanoscale Control  

Science Conference Proceedings (OSTI)

... Selected Publications: Simultaneous positioning and orientation of a single nano-object by flow control: theory and simulations, PP Mathai, AJ ...

2012-03-29T23:59:59.000Z

206

Emissions & Emission Controls - FEERC  

NLE Websites -- All DOE Office Websites (Extended Search)

Emissions and Emission Controls In conjunction with the research efforts at FEERC to improve fuel efficiency and reduce petroleum use, research on emissions is conducted with two...

207

Hydraulic control rod  

DOE Patents (OSTI)

Apparatus for shifting a control rod into and out of a nuclear reactor utilizing as pressure fluid the fluid employed as coolant moderator in the reactor.

Treshow, Michael (Hinsdale, IL)

1976-01-01T23:59:59.000Z

208

Role Based Access Control  

Science Conference Proceedings (OSTI)

... Nash and Poland [10] discuss the application of role based access control to cryptographic authentication devices commonly used in the banking ...

209

Control of Records Procedure  

NLE Websites -- All DOE Office Websites (Extended Search)

1 Revision 1 Effective June 2008 Control, Close-out, and Storage of Documentation Prepared by Electric Transportation Applications Prepared by: ...

210

Computer Applications & Process Control  

Science Conference Proceedings (OSTI)

[valSummaryfrmSearchResults]. Item 1. Topic: Computer Applications & Process Control. Sort by: Title, Author, Publisher, Product Type, In Stock, Date Published...

211

Cooled, temperature controlled electrometer  

DOE Patents (OSTI)

A cooled, temperature controlled electrometer for the measurement of small currents. The device employs a thermal transfer system to remove heat from the electrometer circuit and its environment and dissipate it to the external environment by means of a heat sink. The operation of the thermal transfer system is governed by a temperature regulation circuit which activates the thermal transfer system when the temperature of the electrometer circuit and its environment exceeds a level previously inputted to the external variable temperature control circuit. The variable temperature control circuit functions as subpart of the temperature control circuit. To provide temperature stability and uniformity, the electrometer circuit is enclosed by an insulated housing.

Morgan, John P. (Idaho Falls, ID)

1992-01-01T23:59:59.000Z

212

Air Pollution Controls  

Energy.gov (U.S. Department of Energy (DOE))

Various statutes within the Wisconsin Legislative Documents relate to air pollution control. These statutes describe zoning, permitting, and emissions regulations for hazardous and non-hazardous...

213

Radiation Control (Virginia)  

Energy.gov (U.S. Department of Energy (DOE))

The Department of Health is responsible for regulating radiation and radioactive materials in the Commonwealth of Virginia. Although the Department's Radiation Control Program primarily focuses on...

214

Shore Erosion Control (Maryland)  

Energy.gov (U.S. Department of Energy (DOE))

The Department of Natural Resources is responsible for creating and implementing a program designed to minimize shore erosion through education, erosion control projects, promulgate regulations,...

215

Controlling Graphene's Electronic Structure  

NLE Websites -- All DOE Office Websites (Extended Search)

Controlling Graphene's Electronic Structure Print Graphene, because of its unusual electron properties, reduced dimensionality, and scale, has enormous potential for use in...

216

Controlling Graphene's Electronic Structure  

NLE Websites -- All DOE Office Websites (Extended Search)

Controlling Graphene's Electronic Structure Print Wednesday, 25 April 2007 00:00 Graphene, because of its unusual electron properties, reduced dimensionality, and scale, has...

217

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

5ADocument Control Template - ExcelForm EOTA - Business Form Document Title: P-001, Document Control Process Document Number: Document Control Template - Excel Form EOTA...

218

Personal building controls  

Science Conference Proceedings (OSTI)

Buildings are some of the largest energy consumers in the world and yet occupants are regularly dissatisfied with the interior environment in large part due to thermal discomfort [7]. Studies show that given personal control over their environment, occupants ... Keywords: building, energy, hvac, lighting, personal controls

Andrew Krioukov; David Culler

2012-04-01T23:59:59.000Z

219

Stepping motor controller  

SciTech Connect

A stepping motor is microprocessingly controlled by digital circuitry which monitors the output of a shaft encoder adjustably secured to the stepping motor and generates a subsequent stepping pulse only after the preceding step has occurred and a fixed delay has expired. The fixed delay is variable on a real-time basis to provide for smooth and controlled deceleration.

Bourret, Steven C. (Los Alamos, NM); Swansen, James E. (Los Alamos, NM)

1984-01-01T23:59:59.000Z

220

Stepping motor controller  

DOE Patents (OSTI)

A stepping motor is microprocessor controlled by digital circuitry which monitors the output of a shaft encoder adjustably secured to the stepping motor and generates a subsequent stepping pulse only after the preceding step has occurred and a fixed delay has expired. The fixed delay is variable on a real-time basis to provide for smooth and controlled deceleration.

Bourret, S.C.; Swansen, J.E.

1982-07-02T23:59:59.000Z

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Contamination Control Techniques  

SciTech Connect

Welcome to a workshop on contamination Control techniques. This work shop is designed for about two hours. Attendee participation is encouraged during the workshop. We will address different topics within contamination control techniques; present processes, products and equipment used here at Hanford and then open the floor to you, the attendees for your input on the topics.

EBY, J.L.

2000-05-16T23:59:59.000Z

222

NUCLEAR REACTOR CONTROL SYSTEM  

DOE Patents (OSTI)

A control system is described for a nuclear reactor using enriched uranium fuel of the type of the swimming pool and other heterogeneous nuclear reactors. Circuits are included for automatically removing and inserting the control rods during the course of normal operation. Appropriate safety circuits close down the nuclear reactor in the event of emergency.

Epler, E.P.; Hanauer, S.H.; Oakes, L.C.

1959-11-01T23:59:59.000Z

223

DOE Mercury Control Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Mercury Control Research Mercury Control Research Air Quality III: Mercury, Trace Elements, and Particulate Matter September 9-12, 2002 Rita A. Bajura, Director National Energy Technology Laboratory www.netl.doe.gov 169330 RAB 09/09/02 2 Potential Mercury Regulations MACT Standards * Likely high levels of Hg reduction * Compliance: 2007 Clean Power Act of 2001 * 4-contaminant control * 90% Hg reduction by 2007 Clear Skies Act of 2002 * 3-contaminant control * 46% Hg reduction by 2010 * 70% Hg reduction by 2018 * Hg emission trading President Bush Announcing Clear Skies Initiative February 14, 2002 169330 RAB 09/09/02 3 Uncertainties Mercury Control Technologies * Balance-of-plant impacts * By-product use and disposal * Capture effectiveness with low-rank coals * Confidence of performance 169330 RAB 09/09/02 4

224

Residential Humidity Control Strategies  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Humidity Control Strategies Residential Humidity Control Strategies Armin Rudd Residential Energy Efficiency Stakeholder Meeting 2/29 - 3/2/2012 Austin, Texas 2 Residential Energy Efficiency Stakeholder Meeting 2/29 - 3/2/2012 Austin, Texas Humidity control goals  Comfort, and Indoor Air Quality  Control indoor humidity year-around, just like we do temperature  Durability and customer satisfaction  Reduce builder risk and warranty/service costs 2 3 Residential Energy Efficiency Stakeholder Meeting 2/29 - 3/2/2012 Austin, Texas Humidity control challenges 1. In humid cooling climates, there will always be times of the year when there is little sensible cooling load to create thermostat demand but humidity remains high * Cooling systems that modify fan speed and temperature set point based on humidity can help but are still limited

225

Cyclic control stick  

DOE Patents (OSTI)

A cyclic control stick of the type used in helicopters for reducing the safety hazards associated with such a mechanism in the event of a crewman being thrown violently into contact with the cyclic control stick resulting from a crash or the like. The cyclic control stick is configured to break away upon the exertion of an impact force which exceeds a predetermined value and/or is exerted for more than a momentary time duration. The cyclic control stick is also configured to be adjustable so as to locate the grip thereof as far away from the crewman as possible for safety reasons without comprising the comfort of the crewman or the use of the control stick, and a crushable pad is provided on the top of the grip for impact energy absorbing purposes.

Whitaker, Charles N. (2834 S. Extension Rd., No. 2024, Mesa, AZ 85202); Zimmermann, Richard E. (425 E. Greenway, Tempe, AZ 85282)

1989-01-01T23:59:59.000Z

226

Control of Records  

NLE Websites -- All DOE Office Websites (Extended Search)

3 Control of Records Process 11_0304 Page 1 of 6 3 Control of Records Process 11_0304 Page 1 of 6 EOTA - Business Process Document Title: Control of Records Process Document Number P-003 Rev 11_0304 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: Q-001, Quality Manual Notify of Changes: EOTA Employees Referenced Document(s): REG-003, Records Register P-003 Control of Records Process 11_0304 Page 2 of 6 Revision History: Rev. Description of Change A Initial Release 08_0805 Added Integration Group to Section III. 11_0304 Defined Record Creator and New Record for clarity and swapped Step 3.0 and 4.0 P-003 Control of Records Process 11_0304 Page 3 of 6 I. Purpose To describe the process for how records are established and maintained to provide evidence of conformity to requirements and

227

Surveillance Guides - Hazards Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Hazards Control Hazards Control 1.0 Objective The objective of this surveillance is to evaluate the effectiveness of the contractor's programs and policy for establishing controls to mitigate hazards affecting the public, worker, and environment. 2.0 References 2.1 DOE 4330.4B Maintenance Management Program 2.2 48 CFR 1970.5204-2 Department of Energy Acquisition Regulations 3.0 Requirements Implemented This surveillance is conducted to verify implementation of DOE 450.4-1A Volume 2 Appendix E core expectation #3 (CE II-3). CE II-3: An integrated process has been established and is utilized to develop controls which mitigate the identified hazards present within a facility or activity. The set of controls ensure adequate protection of the public, worker, and the environment and are established as agreed upon by DOE.

228

Control systems under attack?  

E-Print Network (OSTI)

The enormous growth of the Internet during the last decade offers new means to share and distribute both information and data. In Industry, this results in a rapprochement of the production facilities, i.e. their Process Control and Automation Systems, and the data warehouses. At CERN, the Internet opens the possibility to monitor and even control (parts of) the LHC and its four experiments remotely from anywhere in the world. However, the adoption of standard IT technologies to Distributed Process Control and Automation Systems exposes inherent vulnerabilities to the world. The Teststand On Control System Security at CERN (TOCSSiC) is dedicated to explore the vulnerabilities of arbitrary Commercial-Of-The-Shelf hardware devices connected to standard Ethernet. As such, TOCSSiC should discover their vulnerabilities, point out areas of lack of security, and address areas of improvement which can then be confidentially communicated to manufacturers. This paper points out risks of accessing the Control and Automa...

Lders, Stefan

2005-01-01T23:59:59.000Z

229

Neural daylight control system  

E-Print Network (OSTI)

The paper describes the design, the implementation of a neural controller used in an automatic daylight control system. The automatic lighting control system (ALCS) attempt to maintain constant the illuminance at the desired level on working plane even if the daylight contribution is variable. Therefore, the daylight will represent the perturbation signal for the ALCS. The mathematical model of process is unknown. The applied structure of control need the inverse model of process. For this purpose it was used other artificial neural network (ANN) which identify the inverse model of process in an on-line manner. In fact, this ANN identify the inverse model of process + the perturbation signal. In this way the learning signal for neural controller has a better accuracy for the present application.

Grif, Horatiu Stefan

2010-01-01T23:59:59.000Z

230

Isotopically controlled semiconductors  

SciTech Connect

Semiconductor bulk crystals and multilayer structures with controlled isotopic composition have attracted much scientific and technical interest in the past few years. Isotopic composition affects a large number of physical properties, including phonon energies and lifetimes, bandgaps, the thermal conductivity and expansion coefficient and spin-related effects. Isotope superlattices are ideal media for self-diffusion studies. In combination with neutron transmutation doping, isotope control offers a novel approach to metal-insulator transition studies. Spintronics, quantum computing and nanoparticle science are emerging fields using isotope control.

Haller, Eugene E.

2001-12-21T23:59:59.000Z

231

Radiological Control Manual  

Science Conference Proceedings (OSTI)

This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records.

Not Available

1993-04-01T23:59:59.000Z

232

Fermilab DART run control  

SciTech Connect

DART is the high speed, Unix based data acquisition system being developed by Fermilab in collaboration with seven High Energy Physics Experiments. This paper describes DART run control, which has been developed over the past year and is a flexible, distributed, extensible system for the, control and monitoring of the data acquisition systems. We discuss the unique and interesting concepts of the run control and some of our experiences in developing it. We also give a brief update and status of the whole DART system.

Oleynik, G.; Engelfried, J.; Mengel, L. [and others

1995-05-01T23:59:59.000Z

233

Flash protection controller  

DOE Patents (OSTI)

A controller provides a high voltage to maintain an electro-optic shutter in a transparent condition until a flash of light which would be harmful to personnel is sensed by a phototransistor. The controller then shorts the shutter to ground to minimize light transmission to the user and maintains light transmission at the pre-flash level for a predetermined time to allow the flash to subside. A log converter and differential trigger circuit keep the controller from being triggered by other light flashes which are not dangerous.

Galbraith, Lee K. (Mountain View, CA)

1981-01-01T23:59:59.000Z

234

Surface controlled blade stabilizer  

DOE Patents (OSTI)

Drill string stabilizer apparatus, controllable to expand and retract entirely from the surface by control of drill string pressure, wherein increase of drill string pressure from the surface closes a valve to create a piston means which is moved down by drill string pressure to expand the stabilizer blades, said valve being opened and the piston moving upward upon reduction of drill string pressure to retract the stabilizer blades. Upward and downward movements of the piston and an actuator sleeve therebelow are controlled by a barrel cam acting between the housing and the actuator sleeve.

Russell, Larry R. (6025 Edgemor, Suite C, Houston, TX 77081)

1983-01-01T23:59:59.000Z

235

Flash protection controller  

DOE Patents (OSTI)

A controller provides a high voltage to maintain an electro-optic shutter in a transparent condition until a flash of light which would be harmful to personnel is sensed by a phototransistor. The controller then shorts the shutter to ground to minimize light transmission to the user and maintains light transmission at the pre-flash level for a predetermined time to allow the flash to subside. A log converter and differential trigger circuit keep the controller from being triggered by other light flashes which are not dangerous.

Galbraith, L.K.

1979-12-07T23:59:59.000Z

236

Microsoft Word - Draft Advanced Fossil Solicitation Final Draft...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. Department of Energy Loan Programs Office FEDERAL LOAN GUARANTEES FOR ADVANCED FOSSIL ENERGY PROJECTS Solicitation Number: DE-SOL-000 OMB Control Number: 1910-0400...

237

Control of non-controllable quantum systems: A quantum control algorithm based on Grover iteration  

E-Print Network (OSTI)

A new notion of controllability, eigenstate controllability, is defined for finite-dimensional bilinear quantum mechanical systems which are neither strongly completely controllably nor completely controllable. And a quantum control algorithm based on Grover iteration is designed to perform a quantum control task of steering a system, which is eigenstate controllable but may not be (strongly) completely controllable, from an arbitrary state to a target state.

Chen-Bin Zhang; Dao-Yi Dong; Zong-Hai Chen

2005-03-02T23:59:59.000Z

238

Control of External Documents  

NLE Websites -- All DOE Office Websites (Extended Search)

2 Control of External Documents Process 11_0304 Page 1 of 5 2 Control of External Documents Process 11_0304 Page 1 of 5 EOTA - Business Process Document Title: Control of External Documents Process Document Number P-002 Rev 11_0304 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: Q-001, Quality Manual Notify of Changes: EOTA Employees Referenced Document(s): REG-002, External Document Register P-002 Control of External Documents Process 11_0304 Page 2 of 5 Revision History: Rev. Description of Change A Initial Release 11_0304 Changed revision format from alpha character to numbers; modified process to include a step directing addition to REG-002 External Document Register and changed verbiage to clarify and more accurately reflect current process.

239

Media Inventory Control  

NLE Websites -- All DOE Office Websites (Extended Search)

8 Media Inventory Control 11_0406 Page 1 of 5 8 Media Inventory Control 11_0406 Page 1 of 5 EOTA - Business Process Document Title: Media Inventory Control Document Number: ITTP-018 Rev. 09_0910 Document Owner: Janet Lee Backup Owner: Ben Aragon Approver(s): Melissa Otero Parent Document: Q-001, Quality Manual Notify of Changes: Referenced Document(s): MGTP-003 Customer Property, ISDP-002 Training Production Process, ADMP-001 Procurement Process, ADMP-003 Receiving/Inspection Process, ITTF-013 Media Requests ITTP-018 Media Inventory Control 11_0406 Page 2 of 5 Revision History: Rev. Description of Change A Initial Release B Added use of ITTF-013, Media Requests (SMS Records) 08_0904 Changed Media Specialist to Online Learning support Specialist (OLSS). Modified process to better fit actual media request process.

240

Stepping Motor Control System  

E-Print Network (OSTI)

This paper describes a hardware system designed to facilitate position and velocity control of a group of eight stepping motors using a PDP-11. The system includes motor driver cards and other interface cards in addition ...

Larson, Noble G.

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Condenser Microbiofouling Control Handbook  

Science Conference Proceedings (OSTI)

Microbiofouling of condenser surfaces can substantially increase costs at electric power plants. This handbook is a consolidated source of information to support decisions that must be made to control microbiofouling.

1993-11-09T23:59:59.000Z

242

Personalized HVAC control system  

E-Print Network (OSTI)

We present a novel method of building comfort control, focused around the occupant. Custom sensing, communication, and actuation hardware were developed to locate users in a building, and measure various parameters directly ...

Feldmeier, Mark Christopher

243

Radiation: Radiation Control (Indiana)  

Energy.gov (U.S. Department of Energy (DOE))

It is the policy of the state to encourage the constructive uses of radiation and to control its harmful effects. This section contains regulations pertaining to the manufacture, use,...

244

Management Control Cover  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fees in the Idaho National Laboratory Contract OAS-M-06-07 August 2006 REPORT ON MANAGEMENT CONTROLS OVER PERFORMANCE FEES IN THE IDAHO NATIONAL LABORATORY CONTRACT TABLE OF...

245

Stochastically scalable flow control  

Science Conference Proceedings (OSTI)

Recent advances in the mathematical analysis of flow control have prompted the creation of the Scalable TCP (STCP) and Exponential RED (E-RED) algorithms. These are designed to be scalable under the popular deterministic delay ...

Thomas Voice

2009-10-01T23:59:59.000Z

246

Environment induced incoherent controllability  

E-Print Network (OSTI)

We prove that the environment induced entanglement between two non interacting, two-dimensional quantum systems S and P can be used to control the dynamics of S by means of the initial state of P. Using a simple, exactly solvable model, we show that both accessibility and controllability of S can be achieved under suitable conditions on the interaction of S and P with the environment.

Raffaele Romano; Domenico D'Alessandro

2005-11-08T23:59:59.000Z

247

Combustion oscillation control  

SciTech Connect

Premixing of fuel and air can avoid high temperatures which produce thermal NOx, but oscillating combustion must be eliminated. Combustion oscillations can also occur in Integrated Gasification Combined Cycle turbines. As an alternative to design or operating modifications, METC is investigating active combustion control (ACC) to eliminate oscillations; ACC uses repeated adjustment of some combustion parameter to control the variation in heat release that drives oscillations.

Richards, G.A.; Janus, M.C.

1996-12-31T23:59:59.000Z

248

Pit disassembly motion control  

Science Conference Proceedings (OSTI)

A Department of Energy (DOE) Pit Disassembly and Conversion Facility (PDCF) is being designed for the Savannah River Site in South Carolina. The facility will recover plutonium from excess nuclear weapon pits defined in START II and START III treaties. The plutonium will be stored and used to produce mixed oxide reactor fuel at another new DOE facility. Because of radiation dose issues, much of the pit disassembly work and material transfer will be automated. Automated material handling systems will interface with disassembly lathes, conversion reactors that produce oxide for storage, robotic container welding stations, vault retrieval systems, and nondestructive assay (NDA) instrumentation. The goal is to use common motion control hardware for material transfer and possibly common motion controllers for the unique PDCF systems. The latter is complicated by the different directions manufactures are considering for distributed control, such as Firewire, SERCOS, etc., and by the unique control requirements of machines such as lathes compared to controls for an integrated NDA system. The current design approach is to standardize where possible, use network cables to replace wire bundles where possible, but to first select hardware and motion controllers that meet specific machine or process requirements.

Christensen, L. (Lowell); Pittman, P. C. (Pete C.)

2001-01-01T23:59:59.000Z

249

Closing the Gap in Control System Implementations  

E-Print Network (OSTI)

Control Systems . . . . . . . . . . . . . . . . . .Continuous-Time Linear Control Systems . . . . .Discrete-Time Linear Control Systems . . . . . . . . . . .

Saha, Indranil

2013-01-01T23:59:59.000Z

250

Control the Robot Movement by Fuzzy Logic Controller  

Science Conference Proceedings (OSTI)

Recently, great interest has been the reluctance to move to DC motors and its applications in industry Such as robotics, textiles, and household electric vehicle or application or Aviation domains. The first control techniques used classic controllers ... Keywords: control, fuzzy logic controller, pid controller, dc motor, robot movement, simulation

Yousfi Khemissi; Amrani Abdulwahab

2010-03-01T23:59:59.000Z

251

Nonlinear continuous feedback controllers  

E-Print Network (OSTI)

Packet-switched communication networks such as today's Internet are built with several interconnected core and distribution packet forwarding routers and several sender and sink transport agents. In order to maintain stability and avoid congestion collapse in the network, the sources control their rate behavior and voluntarily adjust their sending rates to accommodate other sources in the network. In this thesis, we study one class of sender rate control that is modeled using continuous first-order differential equation of the sending rates. In order to adjust the rates appropriately, the network sends continuous packet-loss feedback to the sources. We study a form of closed-loop feedback congestion controllers whose rate adjustments exhibit a nonlinear form. There are three dimensions to our work in this thesis. First, we study the network optimization problem in which sources choose utilities to maximize their underlying throughput. Each sender maximizes its utility proportional to the throughput achieved. In our model, sources choose a utility function to define their level of satisfaction of the underlying resource usages. The objective of this direction is to establish the properties of source utility functions using inequality constrained bounded sets and study the functional forms of utilities against a chosen rate differential equation. Second, stability of the network and tolerance to perturbation are two essential factors that keep communication networks operational around the equilibrium point. Our objective in this part of the thesis is to analytically understand the existence of local asymptotic stability of delayed-feedback systems under homogeneous network delays. Third, we propose a novel tangential controller for a generic maximization function and study its properties using nonlinear optimization techniques. We develop the necessary theoretical background and the properties of our controller to prove that it is a better rate adaptation algorithm for logarithmic utilities compared to the well-studied proportional controllers. We establish the asymptotic local stability of our controller with upper bounds on the increase / decrease gain parameters.

Sitharaman, Sai Ganesh

2005-05-01T23:59:59.000Z

252

Supervisory Control Strategy Development  

SciTech Connect

Task 4 of this collaborative effort between ORNL, Brazil, and Westinghouse for the International Nuclear Energy Research Initiative entitled Development of Advanced Instrumentation and Control for an Integrated Primary System Reactor focused on the design of the hierarchical supervisory control for multiple-module units. The state of the IRIS plant design specifically, the lack of a detailed secondary system design made developing a detailed hierarchical control difficult at this time. However, other simultaneous and ongoing efforts have contributed to providing the needed information. This report summarizes the results achieved under Task 4 of this Financial Assistance Award. Section 1.2 describes the scope of this effort. Section 2 discusses the IRIS control functions. Next, it briefly reviews the current control concepts, and then reviews the maneuvering requirements for the IRIS plant. It closes by noting the benefits that automated sequences have in reducing operator workload. Section 3 examines reactor loading in the frequency domain to establish some guidelines for module operation, paying particular attention to strategies for using process steam for desalination and/or district heating. The final subsection discusses the implications for reactor control, and argues that using the envisioned percentage (up to 10%) of the NSSS thermal output for these purposes should not significantly affect the NSSS control strategies. Section 4 uses some very general economic assumptions to suggest how one should approach multi-module operation. It concludes that the well-known algorithms used for economic dispatching could be used to help manage a multi-unit IRIS site. Section 5 addresses the human performance factors of multi-module operation. Section 6 summarizes our conclusions.

Gary D. Storrick; Bojan Petrovic

2007-02-28T23:59:59.000Z

253

Supporting Statement:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Supporting Statement: Supporting Statement: OE Recovery Act Financial Assistance Grants OMB Control Number 1910-5149 This supporting statement provides additional information regarding the Department of Energy (DOE) request for processing of the renewal of the proposed information collection, OE Recovery Act Financial Assistance Grants. The numbered questions correspond to the order shown on the Office of Management and Budget (OMB) Form 83-I, "Instructions for Completing OMB Form 83-I." 1. Explain the circumstances that make the collection of information necessary. The Department of Energy (DOE) requires collection of information for Recovery Act Smart Grid grants. Sections 1304 and 1306 of the Energy Independence and Security Act

254

Aquatic plant control research  

DOE Green Energy (OSTI)

The Northwest region of the United States contains extensive canal systems that transport water for hydropower generation. Nuisance plants, including algae, that grow in these systems reduce their hydraulic capacity through water displacement and increased surface friction. Most control methods are applied in an ad hoc fashion. The goal of this work is to develop cost-effective, environmentally sound, long-term management strategies to prevent and control nuisance algal growth. This paper reports on a multi-year study, performed in collaboration with the Pacific Gas & Electric Company, to investigate algal growth in their canal systems, and to evaluate various control methodologies. Three types of controls, including mechanical, biological and chemical treatment, were selected for testing and evaluation. As part of this study, water quality data were collected and algal communities were sampled from numerous stations throughout the distribution system at regular intervals. This study resulted in a more comprehensive understanding of conditions leading to the development of nuisance algal growth, a better informed selection of treatment plans, and improved evaluation of the effectiveness for the control strategies selected for testing.

Pryfogle, P.A.; Rinehart, B.N. [Idaho National Engineering Lab., Idaho Falls, ID (United States); Ghio, E.G. [Pacific Gas & Electric Company, San Francisco, CA (United States). Hydro Generation Engineering

1997-05-01T23:59:59.000Z

255

Performance of microprocessor controllers  

SciTech Connect

United States animal production systems are at the threshold of a major new method for daily management of environmental control -- the integrated microprocessor-based environmental control system. Widespread adoption of this technology has the potential for dramatic improvement in production efficiencies through lower management costs, improved energy savings, and better feed conversion efficiencies. However, the technical problems of transient surge protection and appropriate mechanical backup systems have not been adequately addressed by the industry. The goals of this research were to identify the degree to which transient surge protection was being provided by current manufacturers, and to illustrate the implementation of microprocessor environmental control systems with mechanical backup. Transient open circuit over-voltage tests (ANSI/IEEE C62.41-1980) were performed on 16 environmental control units: a maximum of 800 V spike was applied to the power supplies, and up to 100 V spike applied to temperature sensor lines. Under these relatively mild tests, no failures were noted due to power supply transients, but three units failed when subjected to transients on their temperature sensor lines. Mechanical backup systems were designed to provide essential life-support during critical conditions of extreme outside conditions and extreme animal densities. The design and installation of environmental control systems for (1) a gestation unit and (2) a broiler house was performed. An overview of the process, and difficulties noted, is presented. Both systems incorporated mechanical backups. 20 refs.

Gates, R.S.; Turner, L.W.; Overhults, D.G. (Kentucky Univ., Lexington, KY (United States). Dept. of Agricultural Engineering)

1992-01-01T23:59:59.000Z

256

Low noise control valve  

SciTech Connect

Noise is one of the problems associated with the use of any type of control valve in systems involving the flow of fluids. The advent of OSHA standards has prompted control valve manufacturers to design valves with special trim to lower the sound pressure level to meet these standards. However, these levels are in some cases too high, particularly when a valve must be located in or near an area where people are working at tasks requiring a high degree of concentration. Such locations are found around and near research devices and in laboratory-office areas. This paper describes a type of fluid control device presently being used at PPL as a bypass control valve in deionized water systems and designed to reduce sound pressure levels considerably below OSHA standards. Details of the design and construction of this constant pressure drop variable flow control valve are contained in the text and are shown in photographs and drawings. Test data taken are included. (auth)

Christie, R.S.

1975-01-01T23:59:59.000Z

257

Nuclear reactor control column  

DOE Patents (OSTI)

The nuclear reactor control column comprises a column disposed within the nuclear reactor core having a variable cross-section hollow channel and containing balls whose vertical location is determined by the flow of the reactor coolant through the column. The control column is divided into three basic sections wherein each of the sections has a different cross-sectional area. The uppermost section of the control column has the greatest cross-sectional area, the intermediate section of the control column has the smallest cross-sectional area, and the lowermost section of the control column has the intermediate cross-sectional area. In this manner, the area of the uppermost section can be established such that when the reactor coolant is flowing under normal conditions therethrough, the absorber balls will be lifted and suspended in a fluidized bed manner in the upper section. However, when the reactor coolant flow falls below a predetermined value, the absorber balls will fall through the intermediate section and into the lowermost section, thereby reducing the reactivity of the reactor core and shutting down the reactor.

Bachovchin, Dennis M. (Plum Borough, PA)

1982-01-01T23:59:59.000Z

258

Broadband accelerator control network  

SciTech Connect

A broadband data communications network has been implemented at BNL for control of the Alternating Gradient Synchrotron (AG) proton accelerator, using commercial CATV hardware, dual coaxial cables as the communications medium, and spanning 2.0 km. A 4 MHz bandwidth Digital Control channel using CSMA-CA protocol is provided for digital data transmission, with 8 access nodes available over the length of the RELWAY. Each node consists of an rf modem and a microprocessor-based store-and-forward message handler which interfaces the RELWAY to a branch line implemented in GPIB. A gateway to the RELWAY control channel for the (preexisting) AGS Computerized Accelerator Operating system has been constructed using an LSI-11/23 microprocessor as a device in a GPIB branch line. A multilayer communications protocol has been defined for the Digital Control Channel, based on the ISO Open Systems Interconnect layered model, and a RELWAY Device Language defined as the required universal language for device control on this channel.

Skelly, J.; Clifford, T.; Frankel, R.

1983-01-01T23:59:59.000Z

259

Instrumentation and Control Solutions for Optimizing Steam Temperature Control  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute and Southern Company are executing a comprehensive program to improve main steam temperature control on drum boilers. The program includes assessing and improving the performance of instrumentation, control valves, proportional-integral-derivative control strategies, controller tuning, model predictive control (MPC), and operational aspects affecting steam temperature control. Substantial plant testing, data analysis, and other work have been conducted to date. This ...

2011-12-23T23:59:59.000Z

260

SNS Control Group, Spallation Neutron Source, SNS  

NLE Websites -- All DOE Office Websites (Extended Search)

Control Group at Brookhaven Global Controls References SNS PowerSupply Control - John Smith SNS Diagnostics Control - Peter Cameron SNS Vacuum Control - Johnny Tang SNS Database...

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Transactive Control and Coordination  

NLE Websites -- All DOE Office Websites (Extended Search)

Transactive Control and Coordination Transactive Control and Coordination Speaker(s): Robert Pratt Date: March 15, 2013 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Mary Ann Piette Transactive control and coordination is PNNL's approach to operationalizing smart grid distributed assets. It is a specific case of the general class of techniques the GridWise Architecture Council refers to as transactive energy - "techniques for managing the generation, consumption or flow of electric power within an electric power system through the use of economic- or market-based constructs, with full consideration of grid reliability constraints. The term "transactive" comes from considering that decisions are made based on a value. These decisions may be analogous to or literally economic

262

REACTOR CONTROL DEVICE  

DOE Patents (OSTI)

A wholly mechanical compact control device is designed for automatically rendering the core of a fission reactor subcritical in response to core temperatures in excess of the design operating temperature limit. The control device comprises an expansible bellows interposed between the base of a channel in a reactor core and the inner end of a fuel cylinder therein which is normally resiliently urged inwardly. The bellows contains a working fluid which undergoes a liquid to vapor phase change at a temperature substantially equal to the design temperature limit. Hence, the bellows abruptiy expands at this limiting temperature to force the fuel cylinder outward and render the core subcritical. The control device is particularly applicable to aircraft propulsion reactor service. (AEC)

Graham, R.H.

1962-09-01T23:59:59.000Z

263

Energy saving furnace controller  

Science Conference Proceedings (OSTI)

This patent describes a forced air heating system including a furnace controlled by a household thermostat. The furnace includes a burner, burning valve, heat exchanger, plenum and fan for circulating air through the heat exchanger and plenum. An auxiliary controller comprises: relay means connectable between the household thermostat and the furnace burner valve; and timing means for controlling the duty cycle of the furnace burner valve by opening and closing the relay. The timing means includes means for timing alternating first and second intervals, the first interval at least substantially equal to the length of time the furnace delays between a cell for heat from the household thermostat and the start of the furnace fan when the furnace is started from a cool state. The second interval corresponds to a percentage of the first interval.

Johnson, H.R.; Lombardi, S.E.

1987-05-26T23:59:59.000Z

264

Automatic lighting controls demonstration  

SciTech Connect

The purpose of this work was to demonstrate, in a real building situation, the energy and peak demand reduction capabilities of an electronically ballasted lighting control system that can utilize all types of control strategies to efficiently manage lighting. The project has demonstrated that a state-of-the-art electronically ballasted dimmable lighting system can reduce energy and lighting demand by as least 50% using various combinations of control strategies. By reducing light levels over circulation areas (tuning) and reducing after hours light levels to accommodate the less stringent lighting demands of the cleaning crew (scheduling), lighting energy consumption on weekdays was reduced an average of 54% relative to the initial condition. 10 refs., 14 figs., 3 tabs.

Rubinstein, F.; Verderber, R.

1990-03-01T23:59:59.000Z

265

Electric turbocompound control system  

DOE Patents (OSTI)

Turbocompound systems can be used to affect engine operation using the energy in exhaust gas that is driving the available turbocharger. A first electrical device acts as a generator in response to turbocharger rotation. A second electrical device acts as a motor to put mechanical power into the engine, typically at the crankshaft. Apparatus, systems, steps, and methods are described to control the generator and motor operations to control the amount of power being recovered. This can control engine operation closer to desirable parameters for given engine-related operating conditions compared to actual. The electrical devices can also operate in "reverse," going between motor and generator functions. This permits the electrical device associated with the crankshaft to drive the electrical device associated with the turbocharger as a motor, overcoming deficient engine operating conditions such as associated with turbocharger lag.

Algrain, Marcelo C. (Dunlap, IL)

2007-02-13T23:59:59.000Z

266

SERVOMOTOR CONTROL SYSTEM  

DOE Patents (OSTI)

Control systems for automatic positioning of an electric motor operated vapor valve are described which is operable under the severe conditions existing in apparatus for electro-magnetlcally separating isotopes. In general, the system includes a rotor for turning the valve comprising two colls mounted mutually perpendicular to each other and also perpendicular to the magnetic field of the isotope separating apparatus. The coils are furnished with both a-c and d- c current by assoclate control circuitry and a position control is provided for varying the ratlo of the a-c currents in the coils and at the same time, but in an inverse manner, the ratio between the d-c currents in the coils is varied. With the present system the magnitude of the motor torque is constant for all valves of the rotor orientatlon angle.

MacNeille, S.M.

1958-12-01T23:59:59.000Z

267

Voltage controlled current source  

DOE Patents (OSTI)

A seven decade, voltage controlled current source is described for use in testing intermediate range nuclear instruments that covers the entire test current range of from 10 picoamperes to 100 microamperes. High accuracy is obtained throughout the entire seven decades of output current with circuitry that includes a coordinated switching scheme responsive to the input signal from a hybrid computer to control the input voltage to an antilog amplifier, and to selectively connect a resistance to the antilog amplifier output to provide a continuous output current source as a function of a preset range of input voltage. An operator controlled switch provides current adjustment for operation in either a real-time simulation test mode or a time response test mode.

Casne, Gregory M. (Pittsburgh, PA)

1992-01-01T23:59:59.000Z

268

Dynamic control of grid power flow using controllable network transformers .  

E-Print Network (OSTI)

??The objective of the research is to develop a cost-effective, dynamic grid controller called the controllable network transformer (CNT) that can be implemented by augmenting (more)

Das, Debrup

2011-01-01T23:59:59.000Z

269

Lighting Group: Controls: IBECS  

NLE Websites -- All DOE Office Websites (Extended Search)

IBECS IBECS Integrated Building Environmental Communications System Objective The overall technical goal of the IBECS project is to develop an integrated building equipment communications network that will allow appropriate automation of lighting and envelope systems to increase energy efficiency, improve building performance, and enhance occupant experience in the space. This network will provide a low-cost means for occupants to control local lighting and window systems, thereby improving occupant comfort, satisfaction and performance. A related goal is to improve existing lighting control components and accelerate development of new daylighting technologies that will allow daylighting to be more extensively applied to a larger proportion of building floor space.

270

AUTOMATIC LIGHT CONTROL  

DOE Patents (OSTI)

A control system for a projection kinescope used in a facsimile scanning system and, in particular, meams for maintaining substantially constant the light emanating from the flying spot on the face of the kinescope are described. In general, the invention provides a feeler member disposed in such a position with respect to a projecting lens as to intercept a portion of the light striking the lens. Suitable circuitry in conjunction with a photomultiplier tube provides a signal proportional to the light intensity of the flying spot. The grid bias on the kinescope is controlled by this signal to maintain the intensity of the spot substantially constant.

Artzt, M.

1957-08-27T23:59:59.000Z

271

SAP for Mercury Control  

Science Conference Proceedings (OSTI)

EPRI and the Illinois State Geological Survey (ISGS) have developed and patented a technology for the on-site production of activated carbon (AC). The basic approach of the sorbent activation process (SAP) is to use coal from the plant site to form AC for direct injection into flue gas, upstream of the particulate control device, for mercury adsorption. The SAP is designed to help significantly reduce the cost of AC for power plant mercury control. This report summarizes laboratory and Phase 1 field test...

2009-06-17T23:59:59.000Z

272

The Epicure Control System  

SciTech Connect

The Epicure Control System supports the Fermilab fixed target physics program. The system is distributed across a network of many different types of components. The use of multiple layers on interfaces for communication between logical tasks fits the client-server model. Physical devices are read and controlled using symbolic references entered into a database with an editor utility. The database system consists of a central portion containing all device information and optimized portions distributed among many nodes. Updates to the database are available throughout the system within minutes after being requested.

Dambik, E.; Kline, D.; West, R.

1993-09-01T23:59:59.000Z

273

Experimentally realizable control fields in quantum Lyapunov control  

E-Print Network (OSTI)

As a hybrid of techniques from open-loop and feedback control, Lyapunov control has the advantage that it is free from the measurement-induced decoherence but it includes the system's instantaneous message in the control loop. Often, the Lyapunov control is confronted with time delay in the control fields and difficulty in practical implementations of the control. In this paper, we study the effect of time-delay on the Lyapunov control, and explore the possibility of replacing the control field with a pulse train or a bang-bang signal. The efficiency of the Lyapunov control is also presented through examining the convergence time of the controlled system. These results suggest that the Lyapunov control is robust gainst time delay, easy to realize and effective for high-dimensional quantum systems.

X. X. Yi; S. L. Wu; Chunfeng Wu; X. L. Feng; C. H. Oh

2011-02-24T23:59:59.000Z

274

Experimentally realizable control fields in quantum Lyapunov control  

E-Print Network (OSTI)

As a hybrid of techniques from open-loop and feedback control, Lyapunov control has the advantage that it is free from the measurement-induced decoherence but it includes the system's instantaneous message in the control loop. Often, the Lyapunov control is confronted with time delay in the control fields and difficulty in practical implementations of the control. In this paper, we study the effect of time-delay on the Lyapunov control, and explore the possibility of replacing the control field with a pulse train or a bang-bang signal. The efficiency of the Lyapunov control is also presented through examining the convergence time of the controlled system. These results suggest that the Lyapunov control is robust gainst time delay, easy to realize and effective for high-dimensional quantum systems.

Yi, X X; Wu, Chunfeng; Feng, X L; Oh, C H

2011-01-01T23:59:59.000Z

275

Thermophotovoltaic Spectral Control  

DOE Green Energy (OSTI)

Spectral control is a key technology for thermophotovoltaic (TPV) direct energy conversion systems because only a fraction (typically less than 25%) of the incident thermal radiation has energy exceeding the diode bandgap energy, E{sub g}, and can thus be converted to electricity. The goal for TPV spectral control in most applications is twofold: (1) Maximize TPV efficiency by minimizing transfer of low energy, below bandgap photons from the radiator to the TPV diode. (2) Maximize TPV surface power density by maximizing transfer of high energy, above bandgap photons from the radiator to the TPV diode. TPV spectral control options include: front surface filters (e.g. interference filters, plasma filters, interference/plasma tandem filters, and frequency selective surfaces), back surface reflectors, and wavelength selective radiators. System analysis shows that spectral performance dominates diode performance in any practical TPV system, and that low bandgap diodes enable both higher efficiency and power density when spectral control limitations are considered. Lockheed Martin has focused its efforts on front surface tandem filters which have achieved spectral efficiencies of {approx}83% for E{sub g} = 0.52 eV and {approx}76% for E{sub g} = 0.60 eV for a 950 C radiator temperature.

DM DePoy; PM Fourspring; PF Baldasaro; JF Beausang; EJ Brown; MW Dashiel; KD Rahner; TD Rahmlow; JE Lazo-Wasem; EJ Gratrix; B Wemsman

2004-06-09T23:59:59.000Z

276

Controlling Graphene's Electronic Structure  

NLE Websites -- All DOE Office Websites (Extended Search)

Controlling Graphene's Electronic Structure Print Controlling Graphene's Electronic Structure Print Graphene, because of its unusual electron properties, reduced dimensionality, and scale, has enormous potential for use in ultrafast electronic transistors. It exhibits high conductivity and an anomalous quantum Hall effect (a phenomenon exhibited by certain semiconductor devices at low temperatures and high magnetic fields). Among its novel properties, graphene's electrical charge carriers (electrons and holes) move through a solid with effectively zero mass and constant velocity, like photons. Graphene's intrinsically low scattering rate from defects implies the possibility of a new kind of electronics based on the manipulation of electrons as waves rather than particles. The primary technical difficulty has been controlling the transport of electrical charge carriers through the sheet. This area of research is known as bandgap engineering. While bandgap engineering is the basis of semiconductor technology, it is only now being applied to graphene. Using angle-resolved photoemission spectroscopy (ARPES) at ALS Beamline 7.0.1, a team of scientists from the ALS and Germany characterized the electronic band structure and successfully controlled the gap between valence and conduction bands in a bilayer of graphene thin films deposited on a substrate of silicon carbide. This was done by doping one sheet with adsorbed potassium atoms, creating an asymmetry between the two layers.

277

Control rod studies  

SciTech Connect

This study was undertaken to answer questions asked regarding the required rod stroke for control of modified Tory II-C reactors. All problems described were solved with the Angie code and based on Tory-II-C design problems, RZ 501 and RZ 502, representing hot and cold reactors respectively.

Cole, A.

1963-02-28T23:59:59.000Z

278

Ultrastable neuroendocrine robot controller  

Science Conference Proceedings (OSTI)

The work of a simulated neuroendocrine controller with ultrastable neurons and glands is sketched and tested in terms of stability and adaptability. The artificial neurons connect to each other and to motors, while hormones produced by behaviour-related ... Keywords: Distributed adaptation, hormonal modulation, ultrastability

Lenka Pitonakova

2013-02-01T23:59:59.000Z

279

Switching between stabilizing controllers  

Science Conference Proceedings (OSTI)

This paper deals with the problem of switching between several linear time-invariant (LTI) controllers-all of them capable of stabilizing a specific LTI process-in such a way that the stability of the closed-loop system is guaranteed for any switching ... Keywords: Hybrid systems, Impulse system, Realization theory, Stability theory, Switched systems

JoO P. Hespanha; A.Stephen Morse

2002-11-01T23:59:59.000Z

280

Adaptive sequential controller  

Science Conference Proceedings (OSTI)

An adaptive sequential controller for controlling a circuit breaker or other switching device to substantially eliminate transients on a distribution line caused by closing and opening the circuit breaker. The device adaptively compensates for changes in the response time of the circuit breaker due to aging and environmental effects. A potential transformer provides a reference signal corresponding to the zero crossing of the voltage waveform, and a phase shift comparator circuit compares the reference signal to the time at which any transient was produced when the circuit breaker closed, producing a signal indicative of the adaptive adjustment that should be made. Similarly, in controlling the opening of the circuit breaker, a current transformer provides a reference signal that is compared against the time at which any transient is detected when the circuit breaker last opened. An adaptive adjustment circuit produces a compensation time that is appropriately modified to account for changes in the circuit breaker response, including the effect of ambient conditions and aging. When next opened or closed, the circuit breaker is activated at an appropriately compensated time, so that it closes when the voltage crosses zero and opens when the current crosses zero, minimizing any transients on the distribution line. Phase angle can be used to control the opening of the circuit breaker relative to the reference signal provided by the potential transformer. 15 figs.

El-Sharkawi, M.A.; Xing, J.; Butler, N.G.; Rodriguez, A.

1994-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Mercury Control Update 2009  

Science Conference Proceedings (OSTI)

EPRI has been evaluating cost-effective methods for reducing mercury emissions from coal-fired power plants. This report summarizes the current status of mercury control technologies and offers detailed discussion of boiler bromide addition balance-of-plant impacts and activated carbon injection (ACI) tests at selected sites.

2009-12-14T23:59:59.000Z

282

Adaptive sequential controller  

DOE Patents (OSTI)

An adaptive sequential controller (50/50') for controlling a circuit breaker (52) or other switching device to substantially eliminate transients on a distribution line caused by closing and opening the circuit breaker. The device adaptively compensates for changes in the response time of the circuit breaker due to aging and environmental effects. A potential transformer (70) provides a reference signal corresponding to the zero crossing of the voltage waveform, and a phase shift comparator circuit (96) compares the reference signal to the time at which any transient was produced when the circuit breaker closed, producing a signal indicative of the adaptive adjustment that should be made. Similarly, in controlling the opening of the circuit breaker, a current transformer (88) provides a reference signal that is compared against the time at which any transient is detected when the circuit breaker last opened. An adaptive adjustment circuit (102) produces a compensation time that is appropriately modified to account for changes in the circuit breaker response, including the effect of ambient conditions and aging. When next opened or closed, the circuit breaker is activated at an appropriately compensated time, so that it closes when the voltage crosses zero and opens when the current crosses zero, minimizing any transients on the distribution line. Phase angle can be used to control the opening of the circuit breaker relative to the reference signal provided by the potential transformer.

El-Sharkawi, Mohamed A. (Renton, WA); Xing, Jian (Seattle, WA); Butler, Nicholas G. (Newberg, OR); Rodriguez, Alonso (Pasadena, CA)

1994-01-01T23:59:59.000Z

283

Electrical Demand Control  

E-Print Network (OSTI)

Almost every building owner or manager is interested in controlling electrical costs. Since the HVAC system is a large user of electricity, this article will discuss what can be done in the HVAC system to influence parts of the utility bill.

Eppelheimer, D. M.

1984-01-01T23:59:59.000Z

284

Contamination control device  

DOE Patents (OSTI)

A contamination control device for use in a gas-insulated transmission bus consisting of a cylindrical center conductor coaxially mounted within a grounded cylindrical enclosure. The contamination control device is electrically connected to the interior surface of the grounded outer shell and positioned along an axial line at the lowest vertical position thereon. The contamination control device comprises an elongated metallic member having a generally curved cross-section in a first plane perpendicular to the axis of the bus and having an arcuate cross-section in a second plane lying along the axis of the bus. Each opposed end of the metallic member and its opposing sides are tapered to form a pair of generally converging and downward sloping surfaces to trap randomly moving conductive particles in the relatively field-free region between the metallic member and the interior surface of the grounded outer shell. The device may have projecting legs to enable the device to be spot welded to the interior of the grounded housing. The control device provides a high capture probability and prevents subsequent release of the charged particles after the capture thereof.

Clark, Robert M. (Ligonier, PA); Cronin, John C. (Greensburg, PA)

1977-01-01T23:59:59.000Z

285

Radionuclide deposition control  

DOE Patents (OSTI)

The deposition of radionuclides manganese-54, cobalt-58 and cobalt-60 from liquid sodium coolant is controlled by providing surfaces of nickel or high nickel alloys to extract the radionuclides from the liquid sodium, and by providing surfaces of tungsten, molybdenum or tantalum to prevent or retard radionuclide deposition.

Brehm, William F. (Richland, WA); McGuire, Joseph C. (Richland, WA)

1980-01-01T23:59:59.000Z

286

NEUTRONIC REACTOR CONTROL ELEMENT  

DOE Patents (OSTI)

A boron-10 containing reactor control element wherein the boron-10 is dispersed in a matrix material is describeri. The concentration of boron-10 in the matrix varies transversely across the element from a minimum at the surface to a maximum at the center of the element, prior to exposure to neutrons. (AEC)

Beaver, R.J.; Leitten, C.F. Jr.

1962-04-17T23:59:59.000Z

287

Framing robot arms control  

Science Conference Proceedings (OSTI)

The development of autonomous, robotic weaponry is progressing rapidly. Many observers agree that banning the initiation of lethal activity by autonomous weapons is a worthy goal. Some disagree with this goal, on the grounds that robots may equal and ... Keywords: Autonomous weapons, Machine ethics, Military robots, Moral machines, Operational morality, Robot arms control

Wendell Wallach; Colin Allen

2013-06-01T23:59:59.000Z

288

Lighting Group: Controls: Systems Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration Building Control Systems Integration Objective This research project investigates how diverse building control systems can be integrated to provide seamless...

289

Solar Control Thin Films Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Sputtering equipment Solar Control Thin Films Laboratory The Solar Control Thin Films lab develops novel thin film coatings, deposition technologies, and device systems for...

290

Superconducting VAR control. [Patent application  

DOE Patents (OSTI)

Static VAR control means are described employing an asymmetrically controlled Graetz bridge and a superconducting direct current coil having low losses and low cost characteristics.

Boenig, H.J.; Hassenzahl, W.V.

1980-12-05T23:59:59.000Z

291

BCDA Beamline Control related meetings  

NLE Websites -- All DOE Office Websites (Extended Search)

Control related meetings 071410 APS Upgrade Technical Seminar Series Beamline Control Software and Software Infrastructure (pdf) - Claude Saunders and Pete Jemian 050210 2010...

292

Document Control Template-Instruction  

NLE Websites -- All DOE Office Websites (Extended Search)

2ADocument Control Template - Instruction.doc Page 1 of 6 EOTA - Business Instruction Document Title: Document Control Template - Instruction Document Number: F-002 Rev. A...

293

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

4Document Control Template - Form 110815.doc 110815 Page 1 of 5 EOTA - Business Form Document Title: Document Control Template - Form Document Number: F-004 Rev. 110815...

294

Stored program digital process controller  

DOE Patents (OSTI)

A digital process control function generator wherein a timing clock, in conjunction with programmable read only memories controls variables in a process with respect to time.

Stephenson, Dwight L. (Los Alamos, NM)

1977-01-04T23:59:59.000Z

295

NETL: Advanced NOx Emissions Control  

NLE Websites -- All DOE Office Websites (Extended Search)

Home > Technologies > Coal & Power Systems > Innovations for Existing Plants > Advanced NOx Emissions Control Innovations for Existing Plants Advanced NOx Emissions Control Adv....

296

Transportation News  

Science Conference Proceedings (OSTI)

... NIST Finds That Ethanol-Loving Bacteria Accelerate Cracking of Pipeline Steels Release Date: 08/02/2011 US production ...

2010-10-28T23:59:59.000Z

297

Control of binary distillation column using fuzzy PI controllers  

Science Conference Proceedings (OSTI)

In this paper the automatic control of a binary distillation column is described. This control is done with fuzzy logic controllers. After a short explanation of the function and dynamic of a binary distillation column, it's operating and control strategies ... Keywords: binary distillation column, fuzzy inference system, simulation

Shahram Javadi; Jabber Hosseini

2009-08-01T23:59:59.000Z

298

ELECTRONIC CONTROLLER DEVELOPMENT AND EVALUATION OF CONTROL STRATEGIES  

E-Print Network (OSTI)

ector using solar insolation data, weather data, measuredsimulated weather and load conditions to test solar control

Wahlig, M.

2011-01-01T23:59:59.000Z

299

Intelligent Actuation Control Using Model-Free Adaptive Control Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Intelligent Actuation Control Using Intelligent Actuation Control Using Model-Free Adaptive Control Technology Background The Advanced Research Sensors and Controls Program is leading the effort to develop sensing and control technologies and methods to achieve seamlessly integrated and intelligent power systems. The program is led by the U.S. Department of Energy (DOE) Office of Fossil Energy National Energy Technology Laboratory (NETL) and is implemented

300

30-Day Federal Register Notice - Extension  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

30-Day Federal Register Notice - Extension [6450-01-P] DEPARTMENT OF ENERGY Agency Information Collection Extension AGENCY: U.S. Department of Energy. ACTION: Submission for Office of Management and Budget (OMB) review; comment request SUMMARY: The Department of Energy (DOE) has submitted an information collection request to the OMB for extension under the provisions of the Paperwork Reduction Act of 1995. The information collection requests a three-year extension of its {enter the Title of the collection from question number 7 on OMB Form 83-I}}, OMB Control Number 1910-{enter 4-digit control number}. The proposed collection will {enter a brief description of the collection that highlights the major questions being asked; suggested length is 2 to 5 sentences}..

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

NOTICE OF OFFICE OF MANAGEMENT AND BUDGET ACTION  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9/30/2010 9/30/2010 Department of Energy Office of Administration FOR CERTIFYING OFFICIAL: William Turnbull FOR CLEARANCE OFFICER: Christina Rouleau In accordance with the Paperwork Reduction Act, OMB has taken action on your request received 07/23/2010 ACTION REQUESTED: Extension without change of a currently approved collection TYPE OF REVIEW REQUESTED: Regular ICR REFERENCE NUMBER: 201005-1910-005 AGENCY ICR TRACKING NUMBER: Matthew Grosso TITLE: OE Recovery Act Financial Assistance Grants LIST OF INFORMATION COLLECTIONS: See next page OMB ACTION: Approved with change OMB CONTROL NUMBER: 1910-5149 The agency is required to display the OMB Control Number and inform respondents of its legal significance in accordance with 5 CFR 1320.5(b). EXPIRATION DATE: 12/31/2011 DISCONTINUE DATE:

302

30-Day Federal Register Notice - Extension  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

30-Day Federal Register Notice - Extension [6450-01-P] DEPARTMENT OF ENERGY Agency Information Collection Extension AGENCY: U.S. Department of Energy. ACTION: Submission for Office of Management and Budget (OMB) review; comment request SUMMARY: The Department of Energy (DOE) has submitted an information collection request to the OMB for extension under the provisions of the Paperwork Reduction Act of 1995. The information collection requests a three-year extension of its {enter the Title of the collection from question number 7 on OMB Form 83-I}}, OMB Control Number 1910-{enter 4-digit control number}. The proposed collection will {enter a brief description of the collection that highlights the major questions being asked; suggested length is 2 to 5 sentences}..

303

NOTICE OF OFFICE OF MANAGEMENT AND BUDGET ACTION  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1/10/2012 1/10/2012 Department of Energy Office of Administration FOR CERTIFYING OFFICIAL: William Turnbull FOR CLEARANCE OFFICER: Christina Rouleau In accordance with the Paperwork Reduction Act, OMB has taken action on your request received 10/13/2011 ACTION REQUESTED: Revision of a currently approved collection TYPE OF REVIEW REQUESTED: Regular ICR REFERENCE NUMBER: 201110-1910-001 AGENCY ICR TRACKING NUMBER: Matthew Grosso TITLE: OE Recovery Act Financial Assistance Grants LIST OF INFORMATION COLLECTIONS: See next page OMB ACTION: Approved with change OMB CONTROL NUMBER: 1910-5149 The agency is required to display the OMB Control Number and inform respondents of its legal significance in accordance with 5 CFR 1320.5(b). EXPIRATION DATE: 01/31/2015 DISCONTINUE DATE:

304

Securing Control Systems Modems  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Recommended Practice for Securing Recommended Practice for Securing Control System Modems January 2008 iii ABSTRACT This paper addresses an often overlooked "backdoor" into critical infrastructure control systems created by modem connections. A modem's connection to the public telephone system is similar to a corporate network connection to the Internet. By tracing typical attack paths into the system, this paper provides the reader with an analysis of the problem and then guides the reader through methods to evaluate existing modem security. Following the analysis, a series of methods for securing modems is provided. These methods are correlated to well-known networking security methods. iv ACKNOWLEDGEMENT This document was developed for the U.S. Department of Homeland

305

Steam turbine control  

SciTech Connect

In a power plant which includes a steam turbine with main control valves for admitting steam into the steam turbine and a steam bypass with bypass control valves for diverting steam around the steam turbine directly into a condenser, it is necessary to coordinate the operation of the respective valves so that the steam turbine can be started, brought up to speed, synchronized with a generator and then loaded as smoothly and efficiently as possible. The present invention provides for such operation and, in addition, allows for the transfer of power plant operation from the so-called turbine following mode to the boiler following mode through the use of the sliding pressure concept. The invention described is particularly applicable to combined cycle power plants.

Priluck, D.M.; Wagner, J.B.

1982-05-11T23:59:59.000Z

306

Hybrid powertrain controller  

DOE Patents (OSTI)

A hybrid powertrain for a vehicle comprising a diesel engine and an electric motor in a parallel arrangement with a multiple ratio transmission located on the torque output side of the diesel engine, final drive gearing connecting drivably the output shaft of transmission to traction wheels of the vehicle, and an electric motor drivably coupled to the final drive gearing. A powertrain controller schedules fuel delivered to the diesel engine and effects a split of the total power available, a portion of the power being delivered by the diesel and the balance of the power being delivered by the motor. A shifting schedule for the multiple ratio transmission makes it possible for establishing a proportional relationship between accelerator pedal movement and torque desired at the wheels. The control strategy for the powertrain maintains drivability of the vehicle that resembles drivability of a conventional spark ignition vehicle engine powertrain while achieving improved fuel efficiency and low exhaust gas emissions.

Jankovic, Miroslava (Birmingham, MI); Powell, Barry Kay (Belleville, MI)

2000-12-26T23:59:59.000Z

307

Radiological Control Technician Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Documentation Documentation ............................................................................2.01-1 Module 2.02 Communication Systems ..................................................................................2.02-1 Module 2.03 Counting Errors and Statistics ..........................................................................2.03-1 Module 2.04 Dosimetry .........................................................................................................2.04-1 Module 2.05 Contamination Control .....................................................................................2.05-1 Module 2.06 Airborne Sampling Program/Methods .............................................................2.06-1 Module 2.07 Respiratory Protection ......................................................................................2.07-1

308

Controlled CO preferential oxidation  

DOE Green Energy (OSTI)

Method for controlling the supply of air to a PROX reactor for the preferential oxidation in the presence of hydrogen wherein the concentration of the hydrogen entering and exiting the PROX reactor is monitored, the difference therebetween correlated to the amount of air needed to minimize such difference, and based thereon the air supply to the PROX reactor adjusted to provide such amount and minimize such difference.

Meltser, Mark A. (Pittsford, NY); Hoch, Martin M. (Webster, NY)

1997-01-01T23:59:59.000Z

309

Radiological Control Technician Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Documentation ............................................................................2.01-1 Documentation ............................................................................2.01-1 Module 2.02 Communication Systems ..................................................................................2.02-1 Module 2.03 Counting Errors and Statistics ..........................................................................2.03-1 Module 2.04 Dosimetry .........................................................................................................2.04-1 Module 2.05 Contamination Control .....................................................................................2.05-1 Module 2.06 Airborne Sampling Program/Methods .............................................................2.06-1 Module 2.07 Respiratory Protection ......................................................................................2.07-1

310

Radiological Control Technician Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Radiological Control Technician Training Facility Practical Training Attachment Phase IV Coordinated and Conducted for the Office of Health, Safety and Security U.S. Department of Energy DOE-HDBK-1122-2009 ii This page intentionally left blank DOE-HDBK-1122-2009 iii Table of Contents Page Introduction................................................................................................................................1 Facility Job Performance Measures ........................................................................................2 Final Verification Signatures ....................................................................................................3 DOE-HDBK-1122-2009 iv

311

Residential Gateways and Controllers  

Science Conference Proceedings (OSTI)

Energy companies are exploring two-way residential communications to help reduce the cost of providing standard energy-related services, such as itemized billing or demand reduction, as well as to provide nontraditional services, such as diagnostic services and e-mail. This report covers the key to development of these services -- residential gateways and controllers. The report was prepared with both technical and financial energy company managers in mind, for use as a reference tool and strategic plann...

1999-08-31T23:59:59.000Z

312

Radiation Field Control Manual  

Science Conference Proceedings (OSTI)

The EPRI Radiation Management Program is dedicated to reducing nuclear power plant worker personnel exposure by developing practices and technologies to increase the radiation protection of the worker, and to implement methods to reduce radiation fields. The nuclear power industry has recently implemented the RP2020 Initiative to promote positive radiation protection trends. Control of radiation fields is crucial to one of the initiative goals of reducing exposure. This manual provides the current state ...

2004-12-16T23:59:59.000Z

313

Controlled CO preferential oxidation  

DOE Patents (OSTI)

Method is described for controlling the supply of air to a PROX (PReferential OXidation for CO cleanup) reactor for the preferential oxidation in the presence of hydrogen wherein the concentration of the hydrogen entering and exiting the PROX reactor is monitored, the difference there between correlated to the amount of air needed to minimize such difference, and based thereon the air supply to the PROX reactor adjusted to provide such amount and minimize such difference. 2 figs.

Meltser, M.A.; Hoch, M.M.

1997-06-10T23:59:59.000Z

314

CONTROL MEANS FOR REACTOR  

DOE Patents (OSTI)

An apparatus for controlling a nuclear reactor includes a tank just below the reactor, tubes extending from the tank into the reactor, and a thermally expansible liquid neutron absorbent material in the tank. The liquid in the tank is exposed to a beam of neutrons from the reactor which heats the liquid causing it to expand into the reactor when the neutron flux in the reactor rises above a predetermincd danger point. Boron triamine may be used for this purpose.

Manley, J.H.

1961-06-27T23:59:59.000Z

315

CONTROL ROD DRIVE  

DOE Patents (OSTI)

BS>A drive mechanism was invented for the control rod of a nuclear reactor. Power is provided by an electric motor and an outside source of fluid pressure is utilized in conjunction with the fluid pressure within the reactor to balance the loadings on the motor. The force exerted on the drive mechanism in the direction of scramming the rod is derived from the reactor fluid pressure so that failure of the outside pressure source will cause prompt scramming of the rod.

Chapellier, R.A.

1960-05-24T23:59:59.000Z

316

Stirling engine power control  

DOE Patents (OSTI)

A power control method and apparatus for a Stirling engine including a valved duct connected to the junction of the regenerator and the cooler and running to a bypass chamber connected between the heater and the cylinder. An oscillating zone of demarcation between the hot and cold portions of the working gas is established in the bypass chamber, and the engine pistons and cylinders can run cold.

Fraser, James P. (Scotia, NY)

1983-01-01T23:59:59.000Z

317

Mercury Control Update 2010  

Science Conference Proceedings (OSTI)

A February 2008 decision by the U.S. District of Columbia Circuit Court of Appeals remanded the Clean Air Mercury Rule back to the U.S. Environmental Protection Agency, opening the possibility of more stringent federal emission limits similar to those already adopted by some states. To meet these stringent limits, high mercury removals based on Maximum Achievable Control Technology for individual power plants may be needed. To help electric power companies comply with tightening emission standards in a ...

2010-12-31T23:59:59.000Z

318

Radiological Control Technician Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7of 9 7of 9 Radiological Control Technician Training Practical Training Phase II Coordinated and Conducted for the Office of Health, Safety and Security U.S. Department of Energy DOE-HDBK-1122-2009 ii Table of Contents Page Introduction.............................................................................. ......1 Development of Job Performance Measures (JPMs)............................ .....1 Conduct Job Performance Evaluation...................................................3 Qualification Area: Radiological Instrumentation.......................................5 Task 2-1.................. ..................................................................... 5 Objective.............................................................................. 5

319

TRANSIENT CONTROL LEVEL PHILOSOPHY AND ...  

Science Conference Proceedings (OSTI)

Page 1. TRANSIENT CONTROL LEVEL PHILOSOPHY AND IMPLEMENTATION II. Techniques and Equipment for Making TCL Tests ...

2013-05-17T23:59:59.000Z

320

Weed Control Recommendations in Wheat  

E-Print Network (OSTI)

This publication offers suggestions for controlling weeds in wheat using cultural, mechanical and chemical methods.

Morgan, Gaylon; Baumann, Paul A.; Baughman, Todd; Bean, Brent W.

2008-06-05T23:59:59.000Z

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Automated manual transmission controller  

DOE Patents (OSTI)

A powertrain system for a hybrid vehicle. The hybrid vehicle includes a heat engine, such as a diesel engine, and an electric machine, which operates as both an electric motor and an alternator, to power the vehicle. The hybrid vehicle also includes a manual-style transmission configured to operate as an automatic transmission from the perspective of the driver. The engine and the electric machine drive an input shaft which in turn drives an output shaft of the transmission. In addition to driving the transmission, the electric machine regulates the speed of the input shaft in order to synchronize the input shaft during either an upshift or downshift of the transmission by either decreasing or increasing the speed of the input shaft. When decreasing the speed of the input shaft, the electric motor functions as an alternator to produce electrical energy which may be stored by a storage device. Operation of the transmission is controlled by a transmission controller which receives input signals and generates output signals to control shift and clutch motors to effect smooth launch, upshift shifts, and downshifts of the transmission, so that the transmission functions substantially as an automatic transmission from the perspective of the driver, while internally substantially functioning as a manual transmission.

Lawrie, Robert E. (Whitmore Lake, MI); Reed, Jr., Richard G. (Royal Oak, MI); Bernier, David R. (Rochester Hills, MI)

1999-12-28T23:59:59.000Z

322

Crawling the Control System  

SciTech Connect

Information about accelerator operations and the control system resides in various formats in a variety of places on the lab network. There are operating procedures, technical notes, engineering drawings, and other formal controlled documents. There are programmer references and API documentation generated by tools such as doxygen and javadoc. There are the thousands of electronic records generated by and stored in databases and applications such as electronic logbooks, training materials, wikis, and bulletin boards and the contents of text-based configuration files and log files that can also be valuable sources of information. The obvious way to aggregate all these sources is to index them with a search engine that users can then query from a web browser. Toward this end, the Google "mini" search appliance was selected and implemented because of its low cost and its simple web-based configuration and management. In addition to crawling and indexing electronic documents, the appliance provides an API that has been used to supplement search results with live control system data such as current values of EPICS process variables and graphs of recent data from the archiver.

Theodore Larrieu

2009-10-01T23:59:59.000Z

323

Control Complexity in Fallback Voting  

E-Print Network (OSTI)

We study the control complexity of fallback voting. Like manipulation and bribery, electoral control describes ways of changing the outcome of an election; unlike manipulation or bribery attempts, control actions---such as adding/deleting/partitioning either candidates or voters---modify the participative structure of an election. Via such actions one can try to either make a favorite candidate win ("constructive control") or prevent a despised candidate from winning ("destructive control"). Computational complexity can be used to protect elections from control attempts, i.e., proving an election system resistant to some type of control shows that the success of the corresponding control action, though not impossible, is computationally prohibitive. We show that fallback voting, an election system combining approval with majority voting, is resistant to each of the common types of candidate control and to each common type of constructive control. Among natural election systems with a polynomial-time winner pr...

Erdlyi, Gbor; Rothe, Jrg

2010-01-01T23:59:59.000Z

324

Optimal decentralized control of coupled subsystems with control sharing  

E-Print Network (OSTI)

The optimal decentralized control of coupled subsystems with control sharing is investigated. The system consists of $n$-coupled subsystems, each with a local control station. The evolution of a subsystem is controlled by the actions of all control stations. However, each control station observes only the state of its subsystem and the one-step delayed actions of all control stations. At each time, a cost that depends on the state of all subsystems and the actions of all control stations is incurred. The system has non-classical information structure; since each control station observes the delayed control actions of all other control stations, the system is said to have \\emph{control-sharing} information structure. We first identify redundant data at each controller, then use the common-information based approach of Nayyar et al. (2011) to obtain the structure of optimal control strategies and a dynamic programming decomposition, and finally use the specifics of the model to simplify the structure of optimal...

Mahajan, Aditya

2011-01-01T23:59:59.000Z

325

Variable flow control for a nuclear reactor control rod  

DOE Patents (OSTI)

A variable flow control for a control rod assembly of a nuclear reactor that depends on turbulent friction though an annulus. The annulus is formed by a piston attached to the control rod drive shaft and a housing or sleeve fitted to the enclosure housing the control rod. As the nuclear fuel is burned up and the need exists for increased reactivity, the control rods are withdrawn, which increases the length of the annulus and decreases the rate of coolant flow through the control rod assembly.

Carleton, Richard D. (Pittsburgh, PA); Bhattacharyya, Ajay (Vasteras, SE)

1978-01-01T23:59:59.000Z

326

Optimal control for biological movement systems  

E-Print Network (OSTI)

of hierarchical control system (results obtained afterthe greatest discovery in control and systems theory of theloop Control System. . . . . . . . . . . . . . . . . . . 10

Li, Weiwei

2006-01-01T23:59:59.000Z

327

On Cyber Security for Networked Control Systems  

E-Print Network (OSTI)

on control systems . . . . . . . . . . . . . . . . 7.2control system. . . . . . . . . . . . . . . . . . . . . . . . . .8 Stabilization of Networked Control Systems using 8.1

Amin, Saurabh

2011-01-01T23:59:59.000Z

328

Isotopically controlled semiconductors  

SciTech Connect

The following article is an edited transcript based on the Turnbull Lecture given by Eugene E. Haller at the 2005 Materials Research Society Fall Meeting in Boston on November 29, 2005. The David Turnbull Lectureship is awarded to recognize the career of a scientist who has made outstanding contributions to understanding materials phenomena and properties through research, writing, and lecturing, as exemplified by the life work of David Turnbull. Haller was named the 2005 David Turnbull Lecturer for his 'pioneering achievements and leadership in establishing the field of isotopically engineered semiconductors; for outstanding contributions to materials growth, doping and diffusion; and for excellence in lecturing, writing, and fostering international collaborations'. The scientific interest, increased availability, and technological promise of highly enriched isotopes have led to a sharp rise in the number of experimental and theoretical studies with isotopically controlled semiconductor crystals. This article reviews results obtained with isotopically controlled semiconductor bulk and thin-film heterostructures. Isotopic composition affects several properties such as phonon energies, band structure, and lattice constant in subtle, but, for their physical understanding, significant ways. Large isotope-related effects are observed for thermal conductivity in local vibrational modes of impurities and after neutron transmutation doping. Spectacularly sharp photoluminescence lines have been observed in ultrapure, isotopically enriched silicon crystals. Isotope multilayer structures are especially well suited for simultaneous self- and dopant-diffusion studies. The absence of any chemical, mechanical, or electrical driving forces makes possible the study of an ideal random-walk problem. Isotopically controlled semiconductors may find applications in quantum computing, nanoscience, and spintronics.

Haller, Eugene E.

2006-06-19T23:59:59.000Z

329

Controlled thermonuclear fusion reactors  

SciTech Connect

Controlled production of energy by fusion of light nuclei has been the goal of a large portion of the physics community since the 1950's. In order for a fusion reaction to take place, the fuel must be heated to a temperature of 100 million degrees Celsius. At this temperature, matter can exist only in the form of an almost fully ionized plasma. In order for the reaction to produce net power, the product of the density and energy confinement time must exceed a minimum value of 10/sup 20/ sec m/sup -3/, the so-called Lawson criterion. Basically, two approaches are being taken to meet this criterion: inertial confinement and magnetic confinement. Inertial confinement is the basis of the laser fusion approach; a fuel pellet is imploded by intense laser beams from all sides and ignites. Magnetic confinement devices, which exist in a variety of geometries, rely upon electromagnetic forces on the charged particles of the plasma to keep the hot plasma from expanding. Of these devices, the most encouraging results have been achieved with a class of devices known as tokamaks. Recent successes with these devices have given plasma physicists confidence that scientific feasibility will be demonstrated in the next generation of tokamaks; however, an even larger effort will be required to make fusion power commercially feasible. As a result, emphasis in the controlled thermonuclear research program is beginning to shift from plasma physics to a new branch of nuclear engineering which can be called fusion engineering, in which instrumentation and control engineers will play a major role. Among the new problem areas they will deal with are plasma diagnostics and superconducting coil instrumentation.

Walstrom, P.L.

1976-01-01T23:59:59.000Z

330

Controlling DNA Methylation  

NLE Websites -- All DOE Office Websites (Extended Search)

Controlling DNA Methylation Though life on earth is composed of a diverse range of organisms, some with many different types of tissues and cells, all these are encoded by a molecule we call DNA. The information required to build a protein is stored in DNA within the cells. Not all the message in the DNA is used in each cell and not all the message is used all the time. During cell differentiation, the cells become dedicated for their specific function which involves selectively activating some genes and repressing others. Gene regulation is an important event in the developmental biology and the biology of various diseases, but a more complex process. Controlling DNA Methylation Though life on earth is composed of a diverse range of organisms, some with many different types of tissues and cells, all these are encoded by a molecule we call DNA. The information required to build a protein is stored in DNA within the cells. Not all the message in the DNA is used in each cell and not all the message is used all the time. During cell differentiation, the cells become dedicated for their specific function which involves selectively activating some genes and repressing others. Gene regulation is an important event in the developmental biology and the biology of various diseases, but a more complex process. In the bacteria there are distinct enzymes while one is capable of cleaving DNA, the other protects DNA by modification. The complementary function provided by the set of enzymes offers a defense mechanism against the phage infection and DNA invasion. The incoming DNA is cleaved sequence specifically by the class of enzymes called restriction endonuclease (REase). The host DNA is protected by the sequence specific action of matching set of enzymes called the DNA methyltransferase (MTase). The control of the relative activities of the REase and MTase is critical because a reduced ratio of MTase/REase activity would lead to cell death via autorestriction. However too high a ratio would fail to provide protection against invading viral DNA. In addition a separate group of proteins capable of controlling R-M proteins have been identified in various restriction-modification (R-M) systems which are called C proteins (Roberts et al., 2003).

331

Management Control Cover  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Assess- Assess- ing Natural Resource Damage at Rocky Flats OAS-M-06-02 November 2005 REPORT ON MANAGEMENT CONTROLS OVER ASSESSING NATURAL RESUORCE DAMAGE AT ROCKY FLATS TABLE OF CONTENTS Natural Resource Damage Assessment at Rocky Flats Details of Finding 1 Recommendation and Comments 3 Appendices Objective, Scope, and Methodology 5 Prior Audit Reports 6 Management Comments 7 NATURAL RESURCE DAMAGE ASSESSMENT AT ROCKY FLATS Page 1 Details of Finding Natural Resource The Rocky Flats Project Office (Project Office) had not initiated, Damage Assessment and had no plans, at the time of our review, for conducting a Natural Resource Damage Assessment (NRDA) at the Rocky Flats

332

Thermionic Converter Temperature Controller  

DOE Patents (OSTI)

A method and apparatus for controlling the temperature of a thermionic reactor over a wide range of operating power, including a thermionic reactor having a plurality of integral cesium reservoirs, a honeycomb material disposed about the reactor which has a plurality of separated cavities, a solid sheath disposed about the honeycomb material and having an opening therein communicating with the honeycomb material and cavities thereof, and a shell disposed about the sheath for creating a coolant annulus therewith so that the coolant in the annulus may fill the cavities and permit nucleate boiling during the operation of the reactor.

Shaner,B. J.; Wolf, Joseph H.; Johnson, Robert G. R.

1999-08-23T23:59:59.000Z

333

REMOTE CONTROLLED SWITCHING DEVICE  

DOE Patents (OSTI)

An electrical switching device which can be remotely controlled and in which one or more switches may be accurately operated at predetermined times or with predetermined intervening time intervals is described. The switching device consists essentially of a deck, a post projecting from the deck at right angles thereto, cam means mounted for rotation around said posts and a switch connected to said deck and actuated by said cam means. Means is provided for rotating the cam means at a constant speed and the switching apparatus is enclosed in a sealed container with external adjusting means and electrical connection elements.

Hobbs, J.C.

1959-02-01T23:59:59.000Z

334

Thermionic converter temperature controller  

DOE Patents (OSTI)

A method and apparatus for controlling the temperature of a thermionic reactor over a wide range of operating power, including a thermionic reactor having a plurality of integral cesium reservoirs, a honeycomb material disposed about the reactor which has a plurality of separated cavities, a solid sheath disposed about the honeycomb material and having an opening therein communicating with the honeycomb material and cavities thereof, and a shell disposed about the sheath for creating a coolant annulus therewith so that the coolant in the annulus may fill the cavities and permit nucleate boiling during the operation of the reactor.

Shaner, Benjamin J. (McMurray, PA); Wolf, Joseph H. (Pittsburgh, PA); Johnson, Robert G. R. (Trafford, PA)

2001-04-24T23:59:59.000Z

335

Mercury Controls Update 2011  

Science Conference Proceedings (OSTI)

In light of the proposed Maximum Achievable Control Technology (MACT) ruling for hazardous air pollutants (HAPs) issued by the U.S. Environmental Protection Agency on March 16, 2011, the requirement to reduce emissions of mercury and other HAPs is one of the key challenges for coal-fired power plants. The proposed MACT ruling limits mercury emissions to 1.2 lb/TBtu at the stack (4.0 lb/TBtu for lignite-fired units), based on a 30-day rolling average including startup and shutdown periods. To help electri...

2011-12-21T23:59:59.000Z

336

Radiological Control Technician Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Change Notice No. 1 2009 Change Notice No. 2 2011 DOE HANDBOOK RADIOLOGICAL CONTROL TECHNICIAN TRAINING U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Not Measurement Sensitive DOE-HDBK-1122-2009 This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ Change 1 DOE-HDBK-1122-2009 Original Change Part 3 1.05-1 NCRP Report No. 93 "Ionizing Radiation Exposure of the Population of the United States". NCRP Report No. 160 "Ionizing Radiation Exposure of the Population

337

REACTOR CONTROL MECHANISM  

DOE Patents (OSTI)

A quick-releasing mechanism is described which may be used to rapidiy drop a device supported from beneath during normal use, such as a safety rod in a nuclear reactor. In accordance with this invention an electrical control signal, such as may be provided by radiation detection or other alarm condition sensing devices, is delivered to an electromagnetic solenoid, the armature of which is coupled to an actuating mechanism. The solenoid is energized when the mechanism is in its upper or cocked position. In such position, the mechanism engages a plurality of retaining balls, forcing them outward into engagement with a shoulder or recess in a corresponding section of a tubular extension on the upheld device. When the control signal to the solenoid suddenly ceases, the armature drops out, allowing the actuating mechanism to move slightly but rapidly under the force of a compressed spring. The weight of the device will urge the balls inward against a beveled portion of the actuating mechanism and away from the engaging section on the tubular extension, thus allowing the upheld device to fall freely under the influence of gravity.

Lane, J.A.; Engberg, R.E.; Welch, J.M.

1959-05-12T23:59:59.000Z

338

Laser fusion pulse shape controller  

DOE Patents (OSTI)

An apparatus for controlling the pulse shape, i.e., the pulse duration and intensity pattern, of a pulsed laser system, and which is particularly well adapted for controlling the pellet ignition pulse in a laser-driven fusion reaction system. The apparatus comprises a laser generator for providing an optical control pulse of the shape desired, a pulsed laser triggered by the control pulse, and a plurality of optical Kerr-effect gates serially disposed at the output of the pulsed laser and selectively triggered by the control pulse to pass only a portion of the pulsed laser output generally corresponding in shape to the control pulse.

Siebert, Larry D. (Ann Arbor, MI)

1977-01-01T23:59:59.000Z

339

Lighting Group: Controls and Communications  

NLE Websites -- All DOE Office Websites (Extended Search)

Communications Communications Controls and Communications The Controls and Communications research activity investigates how digital technologies, such as Bluetooth, can be applied to building lighting control systems to increase building efficiency and improve occupant comfort and productivity. Projects range from embedded device networks applied to building lighting systems, to WiFi and environmental sensing and monitoring. light switch Current Projects IBECS (Integrated Building Environmental Communications System) Wireless Lighting Controls (with DUST Networks) HPCBS Advanced Digital Controls Building Control Systems Integration Completed Projects CEC Public Interest Energy Research (PIER) Projects 450 Golden Gate Project New Publications Standardizing Communication Between Lighting Devices: A Role for

340

Johnson Controls ESCO Qualification Sheet  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Johnson Controls ESCO Qualification Sheet DOE Super ESPC Introduction to Johnson Controls Johnson Controls has been a worldwide leader in building controls and efficiency for over 120 years (since 1885). Johnson Controls has developed, designed, installed, financed, measured, verified, operated, maintained, and guaranteed the savings for more than 2,500 projects for our diverse customer base worldwide. Under current Federal ESPC contracts, we have Johnson Controls manages developed and implemented more than 75 projects for various a performance contracting agencies, including the Army, DOE, Air Force, Navy, General Services portfolio in the U.S. of over Administration, Department of Veterans Affairs, Justice Department, $4.3 billion

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Application of programmable logic controllers to substation control and protection  

Science Conference Proceedings (OSTI)

This paper describes the application of programmable logic controllers (PLCs) to control and protection of bulk power and regional supply substations. PLC requirements are discussed and the concept of zones of control is explained as applied to standard PP L substation arrangements. The use of a peer-to-peer communication network between logic controllers and other substation equipment is also discussed. Details of an installation completed in spring, 1992, are presented, including experience acquired from power system faults.

Gilbert, J.G.; Diehl, G.R. (Pennsylvania Power Light Co., Allentown, PA (United States))

1994-01-01T23:59:59.000Z

342

Exact null controllability of degenerate evolution equations with scalar control  

SciTech Connect

Necessary and sufficient conditions for the exact null controllability of a degenerate linear evolution equation with scalar control are obtained. These general results are used to examine the exact null controllability of the Dzektser equation in the theory of seepage. Bibliography: 13 titles.

Fedorov, Vladimir E; Shklyar, Benzion

2012-12-31T23:59:59.000Z

343

The quantum systems control and the optimal control theory  

E-Print Network (OSTI)

Mathematical theory of the quantum systems control is based on some ideas of the optimal control theory. These ideas are developed here as applied to these systems. The results obtained meet the deficiencies in the basis and algorithms of the control synthesis and expand the application of these methods.

V. F. Krotov

2008-04-21T23:59:59.000Z

344

Proposed Agency Information Collection: Federal Register Notice Volume 76,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

54 - Aug. 10, 2011 54 - Aug. 10, 2011 Proposed Agency Information Collection: Federal Register Notice Volume 76, No. 154 - Aug. 10, 2011 The Department of Energy (DOE) invites public comment on DOE's intent to request OMB to renew Information Collection Request Title: OE Recovery Act Financial Assistance Grants, OMB Control No. 1910-5149 for an additional four years that DOE is developing for submission to the Office of Management and Budget (OMB) pursuant to the Paperwork Reduction Act of 1995. Comments regarding this proposed information collection must be received on or before October 11, 2011. ICR, OMB1910.5149.pdf More Documents & Publications Proposed Agency Information Collection: Federal Register Notice Volume 76, No. 195 - Oct. 7, 2011 Department of Energy Proposed Agency Information Collection: Federal

345

Computer Control of Boiler Operation  

E-Print Network (OSTI)

Rapidly rising energy costs present the opportunity for substantial cost savings through improved boiler combustion control. A process computer control system was installed at an Air Products & Chemicals facility in 1978. As a result the boiler efficiency has increased over 11%. The control system includes; air flow, fuel flow, pressure and drum level control. Air flow control is achieved through modulation of the F.D. fan inlet vanes. Demand for airflow is produced from a high signal selection of the steam pressure controller or the total fuel signal. The output of the oxygen controller is used to modify this airflow index by the desired air/fuel ratio. The air/fuel ratio is a polynomial function of the type of fuel used. In summary, the computer control system provides for; greater overall boiler stability, operation within tight air/gas limits, increased boiler efficiency, capability to burn multiple fuels, faster response to demand changes, and fewer shutdowns.

Pareja, G. E.

1981-01-01T23:59:59.000Z

346

Management Control Cover  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

BWXT's Teaming Partner BWXT's Teaming Partner Arrangement at Pantex OAS-M-06-04 February 2006 2 approval and BWXT reimbursed the parent company of Bechtel, Bechtel National, for indirect costs in excess of contract limits. This occurred because the Pantex Site Office did not: 1) ensure that BWXT complied with contractual provisions that limited post-retirement health benefits to BWXT employees, and 2) implement adequate controls to mitigate potential conflict of interest situations involving purchases from Bechtel National and affiliates. As a result, the Department was at risk of paying $3 million in post-retirement health benefits for individuals who were ineligible for the benefits. Additionally, the Department has reimbursed BWXT approximately $90,000 for questionable costs associated with indirect charges made by Bechtel National.

347

Management Control Cover  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

the the Hanford Site Transuranic Mixed Tank Waste OAS-M-06-01 November 2005 REPORT ON MANAGEMENT CONTROLS OVER THE HANFORD SITE TRANSURANIC MIXED TANK WASTE TABLE OF CONTENTS Hanford Site Transuranic Mixed Tank Waste Details of Finding 1 Recommendations and Comments 3 Appendices Objective, Scope, and Methodology 6 Prior Audit Reports 8 Hanford Site Transuranaic Mixed Tank Waste Page 1 Details of Finding Regulation and The Office of River Protection (ORP) pursued the Transuranic Permits Mixed Tank (TRUM) Waste Project without sufficiently addressing regulatory and permitting issues. In 2003, ORP initiated efforts through its contractor, CH2M Hill Hanford Group, Inc. (CHG) to proceed with the TRUM waste project. According

348

Management Control Cover  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Performance Fees in the Idaho Performance Fees in the Idaho National Laboratory Contract OAS-M-06-07 August 2006 REPORT ON MANAGEMENT CONTROLS OVER PERFORMANCE FEES IN THE IDAHO NATIONAL LABORATORY CONTRACT TABLE OF CONTENTS Performance Fees Details of Finding 1 Recommendations and Comments 4 Appendices 1. Objective, Scope, and Methodology 6 2. Other Matters 7 3. Related Audit Reports 8 4. Management Comments 9 PERFORMANCE FEES IN THE IDAHO NATIONAL LABORATORY CONTRACT Page 1 Details of Finding Performance Measures The Department of Energy (Department) did not always effectively and Fees use performance measures and fees to appropriately reward contractor performance. Specifically, the Department allocated approximately $1.1 million for 3 of the 27 performance measures

349

REMOTE CONTROL MANIPULATOR  

DOE Patents (OSTI)

The patent covers a remote-control manipulator in which a tool is carried on a tube at an end thereof angularly related to the main portion of the tube and joined thereto by a curved section. The main portion of the tube is mounted for rotation and axial shifting in a wall separating safe and dangerous areas. The tool is actuated to grasp and release an object in the dangerous area by means of a compound shaft extending through the tube, the shaft having a flexible section extending through the curved section of the tube. The tool is moved about in the dangerous area by rotation and axial movement of the main portion of the tube. Additional movement of the tool is obtained through axial shifting of the shaft with respect to the tube through which it extends. (AEC)

Coffman, R.T.

1962-11-27T23:59:59.000Z

350

Controlled-Potential Electrolysis  

Science Conference Proceedings (OSTI)

Table 2   Metals determined by controlled-potential coulometry...27 Silver Pt Ag + ?? Ag(s) 0.1 M H 2 SO 4 14 , 28 Technetium Hg Tc 7+ ?? Tc 3+ Acetate-tripolyphosphate 29 Thallium Pt Tl + ?? Tl 3+ 1 M HCl 30 Tin Hg Sn 4+ Sn(Hg) 3 M KBr, 0.2 M HBr 31 Titanium Hg Ti 4+ ?? Ti 3+ 6??9 M H 2 SO 4 32 Uranium Hg U 6+ ?? U 4+ 0.5 M H 2 SO 4 33 Vanadium Pt V 5+ ?? V 4+ V 4+ ?? V 5+ 1.5...

351

Electronically controlled cable wrapper  

DOE Patents (OSTI)

A spindle assembly engages and moves along a length of cable to be wrapped with insulating tape. Reels of insulating tape are mounted on a outer rotatable spindle which revolves around the cable to dispense insulating tape. The rate of movement of the spindle assembly along the length of the cable is controlled by a stepper motor which is programmably synchronized to the rate at which rotatable spindle wraps the cable. The stepper motor drives a roller which engages the cable and moves the spindle assembly along the length of the cable as it is being wrapped. The spindle assembly is mounted at the end of an articulated arm which allows free movement of the spindle assembly and allows the spindle assembly to follow lateral movement of the cable.

Young, T.M.

1982-08-17T23:59:59.000Z

352

Radiological Control Technician Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

_______ _______ Change Notice 1 June 2009 DOE HANDBOOK RADIOLOGICAL CONTROL TECHNICIAN TRAINING U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Not Measurement Sensitive DOE-HDBK-1122-2009 This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ Change 1 DOE-HDBK-1122-2009 Original Change Part 3 1.05-1 NCRP Report No. 93 "Ionizing Radiation Exposure of the Population of the United States". NCRP Report No. 160 "Ionizing Radiation Exposure of the Population of the United States". Part 3 1.05-9 4) U.S. national average from diagnostic

353

Intuitionistic Control Logic  

E-Print Network (OSTI)

We introduce a propositional logic ICL, which adds to intuitionistic logic elements of classical reasoning without collapsing it into classical logic. This logic includes a new constant for false, which augments false in intuitionistic logic and in minimal logic. The new constant requires a simple-yet-significant modification of intuitionistic logic both semantically and proof-theoretically. We define a Kripke-style semantics as well as a topological space interpretation in which the new constant is given a precise denotation. We define a sequent calculus and prove cut-elimination. We then formulate a natural deduction proof system with a term calculus, one that gives a direct, computational interpretation of contraction. This calculus shows that ICL is fully capable of typing programming language control constructs such as call/cc while maintaining intuitionistic implication as a genuine connective.

Chuck Liang; Dale Miller

2012-01-01T23:59:59.000Z

354

Cell Operations and Process Control  

Science Conference Proceedings (OSTI)

Mar 5, 2013 ... Aluminum Reduction Technology: Cell Operations and Process Control Sponsored by: TMS Light Metals Division, TMS: Aluminum Committee

355

ARCS Access Rate Control System  

protected steel housing. ... Access Rate Control System This rugged, maintenance- ... Y-12 is seeking an industry partner to fully com-

356

Exercise Control System Press Release  

Science Conference Proceedings (OSTI)

MEL Transfers its Web-Based Emergency Response Exercise Control System. During FY05-FY07 the MEL staff worked ...

2010-10-05T23:59:59.000Z

357

Air Pollution Control Regulations: No.27 - Control of Nitrogen Oxide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Air Pollution Control Regulations: No.27 - Control of Nitrogen Air Pollution Control Regulations: No.27 - Control of Nitrogen Oxide Emissions (Rhode Island) Air Pollution Control Regulations: No.27 - Control of Nitrogen Oxide Emissions (Rhode Island) < Back Eligibility Commercial Industrial Investor-Owned Utility Municipal/Public Utility Rural Electric Cooperative Utility Program Info State Rhode Island Program Type Environmental Regulations Provider Department of Environmental Management These regulations apply to stationary sources with the potential to emit 50 tons of nitrogen oxides (NOx) per year from all pollutant-emitting equipment or activities. The regulations describe possibilities for exemptions (i.e., for sources which have the potential to emit 50 tons but do not actually reach that level) and Reasonably Available Control

358

The UCONABC usage control model  

Science Conference Proceedings (OSTI)

In this paper, we introduce the family of UCONABC models for usage control (UCON), which integrate Authorizations (A), oBligations (B), and Conditions (C). We call these core models because they address the essence of UCON, leaving ... Keywords: access control, digital rights management, privacy, trust, usage control

Jaehong Park; Ravi Sandhu

2004-02-01T23:59:59.000Z

359

Optimal Control of Distillation Systems  

E-Print Network (OSTI)

The optimum performance of a distillation system can be evaluated by examining the product purities, the product recoveries, and the system's capability to respond to small or large, expected or unexpected, plant disturbances. An optimal control system should include accurate instrumentation, closed loop purity control, and a computer system to execute direct digital control with appropriate feed-forward algorithms.

Chatterjee, N.; Suchdeo, S. R.

1984-01-01T23:59:59.000Z

360

REACTOR CONTROL ROD OPERATING SYSTEM  

DOE Patents (OSTI)

A nuclear reactor control rod mechanism is designed which mechanically moves the control rods into and out of the core under normal conditions but rapidly forces the control rods into the core by catapultic action in the event of an emergency. (AEC)

Miller, G.

1961-12-12T23:59:59.000Z

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Adaptive vibration control using synchronous demodulation with ...  

Adaptive vibration control using synchronous demodulation with machine tool controller motor commutation United States Patent

362

Plasma Control Requirements and Concepts For ITER  

Science Conference Proceedings (OSTI)

Technical Paper / Special Section: Plasma Control Issues for Tokamaks / Instrumentation Control and Data Handling

J. Wesley,* H.-W. Bartels; D. Boucher; A. Costley; L. De Kock; Yu. Gribov; M. Huguet; G. Janeschitz; P.-L. Mondino; V. Mukhovatov; A. Portone; M. Sugihara; I. Yonekawa

363

Inverter Controlled Screw Air Compressor Manufacturers ...  

U.S. Energy Information Administration (EIA)

Inverter Controlled Screw Air Compressor, Inverter Controlled Screw Air Compressor Manufacturers & Suppliers Directory - Find here Inverter ...

364

SAFETY SYSTEM FOR CONTROL ROD  

DOE Patents (OSTI)

A structure for monitoring the structural continuity of a control rod foi a neutron reactor is presented. A electric conductor readily breakable under mechanical stress is fastened along the length of the control rod at a plurality of positions and forms a closed circuit with remote electrical components responsive to an open circuit. A portion of the conductor between the control rod and said components is helically wound to allow free and normally unrestricted movement of the segment of conductor secured to the control rod relative to the remote components. Any break in the circuit is indicative of control rod breakage. (AEC)

Paget, J.A.

1963-05-14T23:59:59.000Z

365

NSLS control system upgrade status  

SciTech Connect

The NSLS control system initially installed in 1978 has undergone several modifications but the basic system architecture remained relatively unchanged. The need for faster response, increased reliability and better diagnostics made the control system upgrade a priority. Since the NSLS runs continuously, major changes to the control system are difficult. The upgrade plan had to allow continuous incremental changes to the control system without having any detrimental effect on operations. The plan had to provide for immediate improvement in a few key areas, such as data access rates, and be complete in a short time. At present, most accelerator operations utilize the upgraded control system.

Smith, J.; Ramamoorthy, S.; Tang, Y.; Flannigan, J.; Sathe, S.; Keane, J.; Krinsky, S.

1993-07-01T23:59:59.000Z

366

New controllers aid substation automation  

SciTech Connect

Descriptions of and experience with Siemens voltage regulators, voltage regulator control panels, and digital meters used by two electric cooperatives are described. Magic Valley Electric Cooperative in Texas retrofitted substations to improve substation regulation control. 54 Siemens MJ-XTM voltage regulator control panels were installed, replacing load tap changer control units and single-stage voltage regulator control units. The Smoky Hill Electric Cooperative in Kansas installed Siemens 4700 digital meters and upgraded substation voltage regulators with Siemens JFR single-phase, step voltage regulators to address nightly overvoltage and summer peak demand problems.

Beaty, W.

1996-09-01T23:59:59.000Z

367

Adiabatic evolution under quantum control  

E-Print Network (OSTI)

One of the difficulties in adiabatic quantum computation is the limit on the computation time. Here we propose two schemes to speed-up the adiabatic evolution. To apply this controlled adiabatic evolution to adiabatic quantum computation, we design one of the schemes without any prior knowledge of the instantaneous eigenstates of the final Hamiltonian. Whereas in another scheme, the control is constructed with the instantaneous eigenstate that is the target state of the control. As an illustration, we study a two-level system driven by a time-dependent magnetic field under the control. The physics behind the control scheme is explained.

Wang, W; Yi, X X

2009-01-01T23:59:59.000Z

368

Subsurface Contamination Control  

Science Conference Proceedings (OSTI)

There are two objectives of this report, ''Subsurface Contamination Control''. The first is to provide a technical basis for recommending limiting radioactive contamination levels (LRCL) on the external surfaces of waste packages (WP) for acceptance into the subsurface repository. The second is to provide an evaluation of the magnitude of potential releases from a defective WP and the detectability of the released contents. The technical basis for deriving LRCL has been established in ''Retrieval Equipment and Strategy for Wp on Pallet'' (CRWMS M and O 2000g, 6.3.1). This report updates the derivation by incorporating the latest design information of the subsurface repository for site recommendation. The derived LRCL on the external surface of WPs, therefore, supercede that described in CRWMS M and O 2000g. The derived LRCL represent the average concentrations of contamination on the external surfaces of each WP that must not be exceeded before the WP is to be transported to the subsurface facility for emplacement. The evaluation of potential releases is necessary to control the potential contamination of the subsurface repository and to detect prematurely failed WPs. The detection of failed WPs is required in order to provide reasonable assurance that the integrity of each WP is intact prior to MGR closure. An emplaced WP may become breached due to manufacturing defects or improper weld combined with failure to detect the defect, by corrosion, or by mechanical penetration due to accidents or rockfall conditions. The breached WP may release its gaseous and volatile radionuclide content to the subsurface environment and result in contaminating the subsurface facility. The scope of this analysis is limited to radioactive contaminants resulting from breached WPs during the preclosure period of the subsurface repository. This report: (1) documents a method for deriving LRCL on the external surfaces of WP for acceptance into the subsurface repository; (2) provides a table of derived LRCL for nuclides of radiological importance; (3) Provides an as low as is reasonably achievable (ALARA) evaluation of the derived LRCL by comparing potential onsite and offsite doses to documented ALARA requirements; (4) Provides a method for estimating potential releases from a defective WP; (5) Provides an evaluation of potential radioactive releases from a defective WP that may become airborne and result in contamination of the subsurface facility; and (6) Provides a preliminary analysis of the detectability of a potential WP leak to support the design of an airborne release monitoring system.

Y. Yuan

2001-12-12T23:59:59.000Z

369

Subsurface Contamination Control  

Science Conference Proceedings (OSTI)

There are two objectives of this report, ''Subsurface Contamination Control''. The first is to provide a technical basis for recommending limiting radioactive contamination levels (LRCL) on the external surfaces of waste packages (WP) for acceptance into the subsurface repository. The second is to provide an evaluation of the magnitude of potential releases from a defective WP and the detectability of the released contents. The technical basis for deriving LRCL has been established in ''Retrieval Equipment and Strategy for Wp on Pallet'' (CRWMS M and O 2000g, 6.3.1). This report updates the derivation by incorporating the latest design information of the subsurface repository for site recommendation. The derived LRCL on the external surface of WPs, therefore, supercede that described in CRWMS M and O 2000g. The derived LRCL represent the average concentrations of contamination on the external surfaces of each WP that must not be exceeded before the WP is to be transported to the subsurface facility for emplacement. The evaluation of potential releases is necessary to control the potential contamination of the subsurface repository and to detect prematurely failed WPs. The detection of failed WPs is required in order to provide reasonable assurance that the integrity of each WP is intact prior to MGR closure. An emplaced WP may become breached due to manufacturing defects or improper weld combined with failure to detect the defect, by corrosion, or by mechanical penetration due to accidents or rockfall conditions. The breached WP may release its gaseous and volatile radionuclide content to the subsurface environment and result in contaminating the subsurface facility. The scope of this analysis is limited to radioactive contaminants resulting from breached WPs during the preclosure period of the subsurface repository. This report: (1) documents a method for deriving LRCL on the external surfaces of WP for acceptance into the subsurface repository; (2) provides a table of derived LRCL for nuclides of radiological importance; (3) Provides an as low as is reasonably achievable (ALARA) evaluation of the derived LRCL by comparing potential onsite and offsite doses to documented ALARA requirements; (4) Provides a method for estimating potential releases from a defective WP; (5) Provides an evaluation of potential radioactive releases from a defective WP that may become airborne and result in contamination of the subsurface facility; and (6) Provides a preliminary analysis of the detectability of a potential WP leak to support the design of an airborne release monitoring system.

Y. Yuan

2001-11-16T23:59:59.000Z

370

Analytic Controllability of Time-Dependent Quantum Control Systems  

E-Print Network (OSTI)

The question of controllability is investigated for a quantum control system in which the Hamiltonian operator components carry explicit time dependence which is not under the control of an external agent. We consider the general situation in which the state moves in an infinite-dimensional Hilbert space, a drift term is present, and the operators driving the state evolution may be unbounded. However, considerations are restricted by the assumption that there exists an analytic domain, dense in the state space, on which solutions of the controlled Schrodinger equation may be expressed globally in exponential form. The issue of controllability then naturally focuses on the ability to steer the quantum state on a finite-dimensional submanifold of the unit sphere in Hilbert space -- and thus on analytic controllability. A relatively straightforward strategy allows the extension of Lie-algebraic conditions for strong analytic controllability derived earlier for the simpler, time-independent system in which the drift Hamiltonian and the interaction Hamiltonia have no intrinsic time dependence. Enlarging the state space by one dimension corresponding to the time variable, we construct an augmented control system that can be treated as time-independent. Methods developed by Kunita can then be implemented to establish controllability conditions for the one-dimension-reduced system defined by the original time-dependent Schrodinger control problem. The applicability of the resulting theorem is illustrated with selected examples.

Chunhua Lan; Tzyh-Jong Tarn; Quo-Shin Chi; John W. Clark

2004-09-22T23:59:59.000Z

371

NREL: Wind Research - Controls Analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

Controls Analysis Controls Analysis Photo of a man working inside the hub of a large 3-blades turbine. Working in the hub of Controls Advanced Research Turbine (CART) at the National Wind Technology Center (NWTC) Man in wind turbine hub viewed from inside a wind turbine's blade. At the National Wind Technology Center (NWTC), we design, implement, and test advanced wind turbine controls to maximize energy extraction and reduce structural dynamic loads. These control designs are based on linear models of the turbine that are simulated using specialized modeling software. The resulting advanced controls algorithms are field tested on the NWTC's Controls Advanced Research Turbines (CARTs). NWTC researchers are also studying blade pitch and generator torque, and employing advanced sensors to optimize power capture and reduce wind

372

Development Practice in HVAC Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

Development Practice in HVAC Controls Development Practice in HVAC Controls Speaker(s): John Zhou Date: April 11, 2011 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Philip Haves The presentation will introduce development tools and design considerations used in HVAC controls development. Controls development use simulation, lab testing and field trial at different phases of the project cycle to improve control performance and to achieve rapid development. Development starts with simulation to originate and define algorithm concept. The concept is then implemented in a prototype controller, and tested in lab environment. The concept is refined and verified by analyzing lab results. In the final phase of development, controllers with refined and verified algorithms are installed in field trial sites to ensure system integration and to confirm

373

Radiation control standards and procedures  

SciTech Connect

This manual contains the Radiation Control Standards'' and Radiation Control Procedures'' at Hanford Operations which have been established to provide the necessary control radiation exposures within Irradiation Processing Department. Provision is also made for including, in the form of Bulletins'', other radiological information of general interest to IPD personnel. The purpose of the standards is to establish firm radiological limits within which the Irradiation Processing Department will operate, and to outline our radiation control program in sufficient detail to insure uniform and consistent application throughout all IPD facilities. Radiation Control Procedures are intended to prescribe the best method of accomplishing an objective within the limitations of the Radiation Control Standards. A procedure may be changed at any time provided the suggested changes is generally agreeable to management involved, and is consistent with department policies and the Radiation Control Standards.

1956-12-14T23:59:59.000Z

374

Development of Control Models and a Robust Multivariable Controller for Surface Shape Control  

SciTech Connect

Surface shape control techniques are applied to many diverse disciplines, such as adaptive optics, noise control, aircraft flutter control and satellites, with an objective to achieve a desirable shape for an elastic body by the application of distributed control forces. Achieving the desirable shape is influenced by many factors, such as, actuator locations, sensor locations, surface precision and controller performance. Building prototypes to complete design optimizations or controller development can be costly or impractical. This shortfall, puts significant value in developing accurate modeling and control simulation approaches. This thesis focuses on the field of adaptive optics, although these developments have the potential for application in many other fields. A static finite element model is developed and validated using a large aperture interferometer system. This model is then integrated into a control model using a linear least squares algorithm and Shack-Hartmann sensor. The model is successfully exercised showing functionality for various wavefront aberrations. Utilizing a verified model shows significant value in simulating static surface shape control problems with quantifiable uncertainties. A new dynamic model for a seven actuator deformable mirror is presented and its accuracy is proven through experiment. Bond graph techniques are used to generate the state space model of the multi-actuator deformable mirror including piezo-electric actuator dynamics. Using this verified model, a robust multi-input multi-output (MIMO) H{sub {infinity}} controller is designed and implemented. This controller proved superior performance as compared to a standard proportional-integral controller (PI) design.

Winters, S

2003-06-18T23:59:59.000Z

375

Humidity Control in Residences  

E-Print Network (OSTI)

Maintaining relative humidity below 60% for residential houses in humid climates promotes a healthy indoor environment. Yet, for such homes, these lower humidity levels are difficult to maintain with conventional recirculation air conditioning units. By introducing a separate vapor compression unit to pre-condition outside air, indoor relative humidity can be controlled. This new air conditioning system combines a ventilation unit with a conventional recirculation air conditioning unit. Although successful in maintaining indoor humidity levels below 60%, the new air conditioning system will require more electric energy to provide the additional dehumidification. However, this penalty is shown to be offset by reductions in sensible load during a summer week, which should result in lower energy consumption and peak electric demand during that period. The performance of this new air conditioning system is demonstrated using FSEC 3.0, a building energy simulation program developed by the Florida Solar Energy Center, to simulate the heat and moisture transport occurring within a prototypical residence located in Austin, Texas.

Trowbridge, J.; Peterson, J.

1994-01-01T23:59:59.000Z

376

Automatic temperature control  

Science Conference Proceedings (OSTI)

An automatic temperature control system is described for maintaining a preset temperature in an enclosed space in a building, comprising: heating and cooling means for conditioning the air in the enclosed space to maintain the preset temperature; exterior thermostat means outside the building for sensing ambient exterior temperature levels; interior thermostat means in the enclosed space, preset to the preset temperature to be maintained and connected with the heating and cooling means to energize the means for heating or cooling, as appropriate, when the preset temperature is reached; means defining a heat sink containing a volume of air heated by solar radiation, the volume of the heat sink being such that the temperature level therein is not affected by minor or temporary ambient temperature fluctuations; and heat sink thermostat means in the heat sink sensing the temperature in the heat sink, the heat sink thermostat means being connected in tandem with the exterior thermostat means and operative with the exterior thermostat means to switch the interior thermostat means to either a first readiness state for heating or a second readiness state for cooling, depending upon which mode is indicated by both the exterior and heat sink thermostat means, whereby the system automatically switches between heating and cooling, as required, in response to a comparison of exterior and heat sink temperatures.

Sheridan, J.P.

1986-07-22T23:59:59.000Z

377

Integrating preconcentrator heat controller  

DOE Patents (OSTI)

A method and apparatus for controlling the electric resistance heating of a metallic chemical preconcentrator screen, for example, used in portable trace explosives detectors. The length of the heating time-period is automatically adjusted to compensate for any changes in the voltage driving the heating current across the screen, for example, due to gradual discharge or aging of a battery. The total deposited energy in the screen is proportional to the integral over time of the square of the voltage drop across the screen. Since the net temperature rise, .DELTA.T.sub.s, of the screen, from beginning to end of the heating pulse, is proportional to the total amount of heat energy deposited in the screen during the heating pulse, then this integral can be calculated in real-time and used to terminate the heating current when a pre-set target value has been reached; thereby providing a consistent and reliable screen temperature rise, .DELTA.T.sub.s, from pulse-to-pulse.

Bouchier, Francis A. (Albuquerque, NM); Arakaki, Lester H. (Edgewood, NM); Varley, Eric S. (Albuquerque, NM)

2007-10-16T23:59:59.000Z

378

Buildings Stock Load Control  

E-Print Network (OSTI)

Researchers and practitioners have proposed a variety of solutions to reduce electricity consumption and curtail peak demand. This research focuses on electricity demand control by applying some strategies in existing building to reduce it during the extreme climate period. The first part of this paper presents the objectives of the study: ? to restrict the startup polluting manufacturing units (power station), ? to limit the environmental impacts (greenhouse emission), ? to reduce the transport and distribution electricity infrastructures The second part presents the approach used to rise the objectives : ? To aggregat the individual loads and to analyze the impact of different strategies from load shedding to reduce peak power demand by: ? Developing models of tertiary buildings stocks (Schools, offices, Shops, hotels); ? Making simulations for different load shedding strategies to calculate potential peak power saving. The third part is dedicated to the description of the developed models: An assembly of the various blocks of the library of simbad and simulink permit to model building. Finally the last part prensents the study results: Graphs and tables to see the load shedding strategies impacts.

Joutey, H. A.; Vaezi-Nejad, H.; Clemoncon, B.; Rosenstein, F.

2006-01-01T23:59:59.000Z

379

The averaged control system of fast oscillating control systems  

E-Print Network (OSTI)

For control systems that either have an explicit periodic dependence on time or have periodic solutions and small controls, we define an average control system that takes into account all possible variations of the control, and prove that its solutions approximate all solutions of the oscillating systems as oscillations go faster. The dimension of its velocity set is characterised geomtrically. When it is maximum the average system defines a Finsler metric, unfortunately not twice differntiable in general. Under particular assumptions, valid for the control two body system, this Finsler metric generates a Hamiltonian flow on the cotangent bundle. For minimum time control, this average system proves that averaging the Hamiltonian given by the maximum principle is a valid approximation.

Bombrun, Alex

2011-01-01T23:59:59.000Z

380

Adaptive control for energy conservation  

DOE Green Energy (OSTI)

The use of adaptive control techniques is investigated in heating, ventilating, and air cnditioning (HVAC) systems in solar heated and cooled buildings to minimize the consumption of auxiliary energy. Optimal control theory is used in conjunction with the adaptive control techniques to accomplish the minimization of auxiliary energy. The resulting technique is referred to as adaptive optimal control (AOC). This study has been made by computer simulation and is centered on the National Security and Resources Study Center (NSRSC), a large solar heated and cooled building at the Los Alamos Scientific Laboratory (LASL). Simplified models of the building and HVAC system have been developed for both the heating and cooling modes. The control strategies actually used in the NSRSC were simulated in the models and an adaptive optimal controller was developed and also simulated. Simulation runs were made with both the conventional controller and the adaptive controller and performance results of the two simulations were compared. In the first results (obtained using a partial derivative system identification method), the adaptive optimal controller model demonstrated a savings in auxiliary energy of 28.8% for the heating simulation and 18.3% for the cooling simulation when compared to the conventional controller simulation models.

Farris, D.R.

1978-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

EXPERIMENTAL TEST FACILITY FOR EVALUATION OF CONTROLS AND CONTROL STRATEGIES  

E-Print Network (OSTI)

Pseudo collector vs Return boiler V2 Direct heating Supplysensors Flow switches Boiler enable I DORIC 220 data loggercollector, consists of a boiler with a controlled mixing

Warren, Mashuri L.

2013-01-01T23:59:59.000Z

382

EXPERIMENTAL TEST FACILITY FOR EVALUATION OF CONTROLS AND CONTROL STRATEGIES  

E-Print Network (OSTI)

Sept. Proc. of 3rd Annual Solar Heating and Cooling Researchence Applications, Inc. SOLAR HEATING/ COOLING TEST FACILITYperformance of different solar heating control strategies

Warren, Mashuri L.

2013-01-01T23:59:59.000Z

383

EXPERIMENTAL TEST FACILITY FOR EVALUATION OF CONTROLS AND CONTROL STRATEGIES  

E-Print Network (OSTI)

Workshop on Control of Solar Energy Systems for Heating andand Michael Wahlig Solar Energy Group Energy and Environmentfor active hydronic solar energy systems. The experimental

Warren, Mashuri L.

2013-01-01T23:59:59.000Z

384

NETL: Advanced NOx Emissions Control: Control Technology - Mercury...  

NLE Websites -- All DOE Office Websites (Extended Search)

Mercury Speciation from NOx Control University of North Dakota Energy and Environmental Research Center (UNDEERC) is addressing the impact that selective catalytic reduction (SCR),...

385

Coordinated train control and energy management control strategies  

DOE Green Energy (OSTI)

The Bay Area Rapid Transit (BART) system, in collaboration with Hughes Aircraft Company and Harmon Industries, as in the process of developing an Advanced Automatic Train Control (AATC) system to replace the current fixed-block automatic system. In the long run, the AATC system is expected to not only allow for safe short headway operation, but also to facilitate coordinated train control and energy management. This new system will employ spread spectrum radios, installed onboard trains, at wayside locations, and at control stations, to determine train locations and reliably transfer control information. Sandia National Laboratories has worked cooperatively with BART to develop a simulator of the train control and the power consumption of the AATC system. The authors are now in the process of developing enhanced train control algorithms to supplement the safety critical controller in order to smooth out train trajectories through coordinated control of multiple trains, and to reduce energy consumption and power infrastructure requirements. The control algorithms so far considered include (1) reducing peak power consumption to avoid voltage sags, especially during an outage or while clearing a backup, (2) rapid and smooth recovery from a backup, (3) avoiding oscillations due to train interference, (4) limiting needle peaks in power demand at substations to some specified level, (5) coasting, and (6) coordinating train movement, e.g., starts/stops and hills.

Gordon, S.P. [Sandia National Labs., Livermore, CA (United States); Lehrer, D.G. [Bay Area Rapid Transit District, Oakland, CA (United States)

1998-05-01T23:59:59.000Z

386

Environment control system  

SciTech Connect

A system for controlling the environment of an enclosed area in nuclear reactor installations. The system permits the changing of the environment from nitrogen to air, or from air to nitrogen, without the release of any radioactivity or process gas to the outside atmosphere. In changing from a nitrogen to an air environment, oxygen is inserted into the enclosed area at the same rate which the nitrogen-oxygen gas mixture is removed from the enclosed area. The nitrogen-oxygen gas mixture removed from the enclosed area is mixed with hydrogen, the hydrogen recombining with the oxygen present in the gas to form water. The water is then removed from the system and, if it contains any radioactive products, can be utilized to form concrete, which can then be transferred to a licensed burial site. The process gas is purified further by stripping it of carbon dioxide and then distilling it to remove any xenon, krypton, and other fission or non-condensable gases. The pure nitrogen is stored as either a cryogenic liquid or a gas. In changing from an air to nitrogen environment, the gas is removed from the enclosed area, mixed with hydrogen to remove the oxygen present, dried, passed through adsorption beds to remove any fission gases, and reinserted into the enclosed area. Additionally, the nitrogen stored during the nitrogen to air change, is inserted into the enclosed area, the nitrogen from both sources being inserted into the enclosed area at the same rate as the removal of the gas from the containment area. As designed, the amount of nitrogen stored during the nitrogen to air change substantially equals that required to replace oxygen removed during an air to nitrogen change.

Sammarone, Dino G. (Edgewood Borough, PA)

1978-01-01T23:59:59.000Z

387

DOE standard: Radiological control  

Science Conference Proceedings (OSTI)

The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs. DOE has established regulatory requirements for occupational radiation protection in Title 10 of the Code of Federal Regulations, Part 835 (10 CFR 835), ``Occupational Radiation Protection``. Failure to comply with these requirements may lead to appropriate enforcement actions as authorized under the Price Anderson Act Amendments (PAAA). While this Standard does not establish requirements, it does restate, paraphrase, or cite many (but not all) of the requirements of 10 CFR 835 and related documents (e.g., occupational safety and health, hazardous materials transportation, and environmental protection standards). Because of the wide range of activities undertaken by DOE and the varying requirements affecting these activities, DOE does not believe that it would be practical or useful to identify and reproduce the entire range of health and safety requirements in this Standard and therefore has not done so. In all cases, DOE cautions the user to review any underlying regulatory and contractual requirements and the primary guidance documents in their original context to ensure that the site program is adequate to ensure continuing compliance with the applicable requirements. To assist its operating entities in achieving and maintaining compliance with the requirements of 10 CFR 835, DOE has established its primary regulatory guidance in the DOE G 441.1 series of Guides. This Standard supplements the DOE G 441.1 series of Guides and serves as a secondary source of guidance for achieving compliance with 10 CFR 835.

Not Available

1999-07-01T23:59:59.000Z

388

Transformaciones del Estado y las nuevas exigencias del control de la corrupcin: transparencia fiscal, control administrativo y control social.  

E-Print Network (OSTI)

??[ES] Tesis doctoral sobre las transformaciones del Estado y las nuevas exigencias del control de la corrupcin: transparencia fiscal, control administrativo y control social.; [EN] (more)

Mileski, Helio Saul

2011-01-01T23:59:59.000Z

389

Document Control Template-Process  

NLE Websites -- All DOE Office Websites (Extended Search)

1_ADocument Control Template - Process.doc Page 1 of 7 1_ADocument Control Template - Process.doc Page 1 of 7 EOTA - Business Process Document Title: Document Control Template - Process Document Number: F-001 Rev. A Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: P-001, Document Control Process Notify of Changes: EOTA Employees Referenced Document(s): N/A F-001_ADocument Control Template - Process.doc Page 2 of 7 Revision History: Rev. Description of Change A Initial Release B C D E F-001_ADocument Control Template - Process.doc Page 3 of 7 EOTA - Business Process Document Title: DocTitle Document Number: P-DocID# Rev Document Owner: Elizabeth Sousa Backup Owner: David McKay Approver(s): Dennis Murphy Parent Document:

390

Digitally controlled distributed phase shifter  

DOE Patents (OSTI)

A digitally controlled distributed phase shifter is comprised of N phase shifters. Digital control is achieved by using N binary length-weighted electrodes located on the top surface of a waveguide. A control terminal is attached to each electrode thereby allowing the application of a control signal. The control signal is either one of two discrete bias voltages. The application of the discrete bias voltages change the modal index of a portion of the waveguide that corresponds to a length of the electrode to which the bias voltage is applied, thereby causing the phase to change through the underlying portion of the waveguide. The digitally controlled distributed phase shift network has a total phase shift comprised of the sum of the individual phase shifters.

Hietala, V.M.; Kravitz, S.H.; Vawter, G.A.

1992-12-31T23:59:59.000Z

391

Digitally controlled distributed phase shifter  

DOE Patents (OSTI)

A digitally controlled distributed phase shifter is comprised of N phase shifters. Digital control is achieved by using N binary length-weighted electrodes located on the top surface of a waveguide. A control terminal is attached to each electrode thereby allowing the application of a control signal. The control signal is either one or two discrete bias voltages. The application of the discrete bias voltages changes the modal index of a portion of the waveguide that corresponds to a length of the electrode to which the bias voltage is applied, thereby causing the phase to change through the underlying portion of the waveguide. The digitally controlled distributed phase shift network has a total phase shift comprised of the sum of the individual phase shifters.

Hietala, V.M.; Kravitz, S.H.; Vawter, G.A.

1993-08-17T23:59:59.000Z

392

Monitoring Control Applications at CERN  

E-Print Network (OSTI)

The Industrial Controls and Engineering (EN-ICE) group [1] of the Engineering Department at CERN has produced, and is responsible for the operation of around 60 applications, which control critical processes in the domains of cryogenics, quench protection systems, power interlocks for the Large Hadron Collider and other subsystems of the accelerator complex. These applications require 24/7 operation and a quick reaction to problems. For this reason the EN-ICE group is presently developing the Monitoring Operation of cOntrols Networks (MOON) tool to detect, anticipate and inform of possible anomalies in the integrity of the applications. The tool builds on top of Simatic WinCC Open Architecture (WinCC OA) [2] SCADA and makes usage of the Joint COntrols Project (JCOP) [3] and the UNified INdustrial COntrol System (UNICOS) [4] Frameworks developed at CERN. The tool provides centralized monitoring and software management of the different elements integrating the control systems like Windows and L...

Bernard, F; Milcent, H; Petrova, L B; Varela, F

2011-01-01T23:59:59.000Z

393

Integrated control system and method  

DOE Patents (OSTI)

An integrated control system for use with an engine connected to a generator providing electrical power to a switchgear is disclosed. The engine receives gas produced by a gasifier. The control system includes an electronic controller associated with the gasifier, engine, generator, and switchgear. A gas flow sensor monitors a gas flow from the gasifier to the engine through an engine gas control valve and provides a gas flow signal to the electronic controller. A gas oversupply sensor monitors a gas oversupply from the gasifier and provides an oversupply signal indicative of gas not provided to the engine. A power output sensor monitors a power output of the switchgear and provide a power output signal. The electronic controller changes gas production of the gasifier and the power output rating of the switchgear based on the gas flow signal, the oversupply signal, and the power output signal.

Wang, Paul Sai Keat; Baldwin, Darryl; Kim, Myoungjin

2013-10-29T23:59:59.000Z

394

Adaptive control for energy conservation  

DOE Green Energy (OSTI)

The objective of this project is to investigate the use of adaptive control concepts in buildings with solar-assisted heating, ventilating, and air-conditioning (HVAC) systems to maintain occupant comfort conditions while minimizing auxiliary energy use. Accomplishing this objective requires an energy management system capable of making sound tradeoffs. Optimal control theory is used along with a system identification technique to provide an adaptable stratgy. The resulting overall approach is known as adaptive optimal control (AOC).

Farris, D.R.

1980-03-01T23:59:59.000Z

395

Pump control system for windmills  

DOE Patents (OSTI)

A windmill control system having lever means, for varying length of stroke of the pump piston, and a control means, responsive to the velocity of the wind to operate the lever means to vary the length of stroke and hence the effective displacement of the pump in accordance with available wind energy, with the control means having a sensing member separate from the windmill disposed in the wind and displaceable thereby in accordance with wind velocity.

Avery, Don E. (45-437 Akimala St., Honolulu, HI 96744)

1983-01-01T23:59:59.000Z

396

Control Relay Aging Management Guideline  

Science Conference Proceedings (OSTI)

The concept for this report came from the concern that many control relays have been in service for an extended period of time and an effective aging management program may not be in place for these relays. In addition, recent Institute of Nuclear Power Operations (INPO) data indicate that relays are one of the leading component types causing scrams. With control relay age increasing and relays being a significant contributor to scrams, an evaluation of control relay maintenance and replacement strategie...

2011-05-03T23:59:59.000Z

397

Quantum error control codes  

E-Print Network (OSTI)

It is conjectured that quantum computers are able to solve certain problems more quickly than any deterministic or probabilistic computer. For instance, Shor's algorithm is able to factor large integers in polynomial time on a quantum computer. A quantum computer exploits the rules of quantum mechanics to speed up computations. However, it is a formidable task to build a quantum computer, since the quantum mechanical systems storing the information unavoidably interact with their environment. Therefore, one has to mitigate the resulting noise and decoherence effects to avoid computational errors. In this dissertation, I study various aspects of quantum error control codes - the key component of fault-tolerant quantum information processing. I present the fundamental theory and necessary background of quantum codes and construct many families of quantum block and convolutional codes over finite fields, in addition to families of subsystem codes. This dissertation is organized into three parts: Quantum Block Codes. After introducing the theory of quantum block codes, I establish conditions when BCH codes are self-orthogonal (or dual-containing) with respect to Euclidean and Hermitian inner products. In particular, I derive two families of nonbinary quantum BCH codes using the stabilizer formalism. I study duadic codes and establish the existence of families of degenerate quantum codes, as well as families of quantum codes derived from projective geometries. Subsystem Codes. Subsystem codes form a new class of quantum codes in which the underlying classical codes do not need to be self-orthogonal. I give an introduction to subsystem codes and present several methods for subsystem code constructions. I derive families of subsystem codes from classical BCH and RS codes and establish a family of optimal MDS subsystem codes. I establish propagation rules of subsystem codes and construct tables of upper and lower bounds on subsystem code parameters. Quantum Convolutional Codes. Quantum convolutional codes are particularly well-suited for communication applications. I develop the theory of quantum convolutional codes and give families of quantum convolutional codes based on RS codes. Furthermore, I establish a bound on the code parameters of quantum convolutional codes - the generalized Singleton bound. I develop a general framework for deriving convolutional codes from block codes and use it to derive families of non-catastrophic quantum convolutional codes from BCH codes. The dissertation concludes with a discussion of some open problems.

Abdelhamid Awad Aly Ahmed, Sala

2008-05-01T23:59:59.000Z

398

Access Control Policy Tool (ACPT)  

Science Conference Proceedings (OSTI)

... In regard to cyber security, privacy, and information sharing, access control is one of the crucial elements in protecting the nation's critical IT ...

2013-01-15T23:59:59.000Z

399

NETL: CO2 Control - Other  

NLE Websites -- All DOE Office Websites (Extended Search)

Other Other Active and completed projects researching other novel methods for CO2 control. Other Projects (click to expand close) Active Other Projects Geological...

400

The APS control system network  

SciTech Connect

The APS accelerator control system is a distributed system consisting of operator interfaces, a network, and computer-controlled interfaces to hardware. This implementation of a control system has come to be called the {open_quotes}Standard Model.{close_quotes} The operator interface is a UNDC-based workstation with an X-windows graphical user interface. The workstation may be located at any point on the facility network and maintain full functionality. The function of the network is to provide a generalized communication path between the host computers, operator workstations, input/output crates, and other hardware that comprise the control system. The crate or input/output controller (IOC) provides direct control and input/output interfaces for each accelerator subsystem. The network is an integral part of all modem control systems and network performance will determine many characteristics of a control system. This paper will describe the overall APS network and examine the APS control system network in detail. Metrics are provided on the performance of the system under various conditions.

Sidorowicz, K.V.; McDowell, W.P.

1995-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Export Control | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Security and Isotope Technology Division Export Control Team promotes the U.S. nonproliferation agenda by providing policy interpretation, technical guidance, and support to...

402

Computer Applications and Process Control  

Science Conference Proceedings (OSTI)

"The Computer-Aided Design and Manufacture of Sheet Metal Parts" (Forum Feature), R. Brandegger, July 1990, pp. 48-50. "Control Aspects of the Mitsubishi

403

WIPP - Passive Institutional Controls (PICs)  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy has developed a program for the development of Passive Institutional Controls to alert future generations to the potential hazards of intersecting the Waste Isolation Pilot...

404

Control Strategies For Transit Priority  

E-Print Network (OSTI)

Light Rail Transit," Transportation Research Record, No.Rail Signal Control Strategies by Combining Transit and Traffic Simulation Models," Transportation Research

Skabardonis, Alexander

1998-01-01T23:59:59.000Z

405

Available Technologies: Spatially Controlled Surface ...  

This spatial control of functionality is very difficult to achieve with non-grafting techniques currently in use such as direct copolymerization, ...

406

CONTROL SYSTEM FOR NEUTRONIC REACTORS  

DOE Patents (OSTI)

BS>A slow-acting shim rod for control of major variations in reactor neutron flux and a fast-acting control rod to correct minor flux variations are employed to provide a sensitive, accurate control system. The fast-acting rod is responsive to an error signal which is produced by changes in the neutron flux from a predetermined optimum level. When the fast rod is thus actuated in a given direction, means is provided to actuate the slow-moving rod in that direction to return the fast rod to a position near the midpoint of its control range. (AEC)

Crever, F.E.

1962-05-01T23:59:59.000Z

407

Steam Boiler Control Specification Problem:  

E-Print Network (OSTI)

Our solution to the specification problem in the specification language TLA+ is based on a model of operation where several components proceed synchronously. Our first specification concerns a simplified controller and abstracts from many details given in the informal problem description. We successively add modules to build a model of the state of the steam boiler, detect failures, and model message transmission. We give a more detailed controller specification and prove that it refines the abstract controller. We also address the relationship between the physical state of the steam boiler and the model maintained by the controller and discuss the reliability of failure detection. Finally, we discuss the implementability of our specification.

Tla Solution Frank; Frank Le Ke; Stephan Merz

1996-01-01T23:59:59.000Z

408

Avoid advanced control project mistakes  

Science Conference Proceedings (OSTI)

On-line process optimization is worth working for but without robust advanced controls it will never happen. In this paper, the author evaluates how well advanced controls worked in five refineries. Having spent money on such projects, the refineries faced a situation in which there was no measurable improvement in overall plant performance. These refineries are owned by different companies, yet they share a pattern of mistakes in administrating advanced controls. Highlighting these mistakes shows ways to improve the organization of advanced control technology, to avoid obvious pitfalls.

Friedman, Y.Z. (Petrocontrol, Madison, NJ (United States))

1992-10-01T23:59:59.000Z

409

Distributed Control for Smart Lighting.  

E-Print Network (OSTI)

??In this research, we investigate designing a smart lighting system. By extending and enhancing the centralized and distributed control algorithms we try to address the (more)

Phadke, Swanand Shripad

2010-01-01T23:59:59.000Z

410

Controlled Processing of Mesoporous ??Fe  

Science Conference Proceedings (OSTI)

The liquid mixtures were processed into amorphous solid foams in a microwave oven under controlled sensor heating process. Based on TGA/DSC experiments

411

Radiation Safety Work Control Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Radiation Safety Work Control Form (see instructions on pg-2) Rev July-2012 Area: Form : Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers...

412

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

3 Media Requests 080904 EOTA - Business Form Document Title: ITTP-018, Media Inventory Control Document Number: Media Requests ITT, ADM Ben Aragon NA Referenced Documents: Parent...

413

Pollution Control Facilities (South Carolina)  

Energy.gov (U.S. Department of Energy (DOE))

For the purpose of this legislation, pollution control facilities are defined as any facilities designed for the elimination, mitigation or prevention of air or water pollution, including all...

414

Guidelines for Particulate Control for Advanced SO2 Control Processes  

Science Conference Proceedings (OSTI)

To assist utilities in complying with Phase II of the Clean Air Act Amendments, this report delineates the effects of advanced SO2 control technologies on particulate control systems. This guide can prove invaluable to environmental engineers and planners who must select compatible systems and identify sound operating strategies for these technologies.

1994-12-30T23:59:59.000Z

415

Building Blocks for Tobacco Control: A Handbook  

E-Print Network (OSTI)

BLOCKS FOR TOBACCO CONTROL: A HANDBOOK BUILDING BLOCKS FORTOBACCO CONTROL: A HANDBOOK BUILDING BLOCKS FORTOBACCO CONTROL: A HANDBOOK BUILDING BLOCKS FOR TOBACCO

World Health Organization

2004-01-01T23:59:59.000Z

416

Frequency Control Performance Measurement and Requirements  

E-Print Network (OSTI)

power systems operations could significantly influence primary frequency control.power system operations could not significantly influence primary frequency control.power system operations. Determination of frequency control

Illian, Howard F.

2011-01-01T23:59:59.000Z

417

Model Predictive Control for Energy Efficient Buildings  

E-Print Network (OSTI)

P. Haves et al. Model Predictive Control of HVAC Systems:Bilinear Model Predictive Control of a HVAC System Usingof model predictive control algorithms for HVAC systems.

Ma, Yudong

2012-01-01T23:59:59.000Z

418

Federal Energy Management Program: Lighting Control Types  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting Control Types Characteristics of the most common lighting controls for offices and other public buildings are outlined below. Typical Lighting Control Applications...

419

Nonlinear Control of Delay and PDE Systems  

E-Print Network (OSTI)

Conference on Control and Systems, 1997. [151] O. Roesch, H.Adaptive Control for Systems with Uncertain Plant Pa-Stability of networked control systems with uncertain time-

Bekiaris-Liberis, Nikolaos

420

Automotive Powertrain Control - A Survey  

E-Print Network (OSTI)

This paper surveys recent and historical publications on automotive powertrain control. Controloriented models of gasoline and diesel engines and their aftertreatment systems are reviewed, and challenging control problems for conventional engines, hybrid vehicles and fuel cell powertrains are discussed. Fundamentals are revisited and advancements are highlighted. A comprehensive list of references is provided. 1

Jeffrey A. Cook; Jing Sun; Julia H. Buckl; Ilya V. Kolmanovsky; Huei Peng; Jessy W. Grizzle

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Statistical global metabolic control analysis  

Science Conference Proceedings (OSTI)

This work introduces the concept of global sensitivity based on simultaneous variation of a complete set of enzymes, metabolite concentrations, and cofactors in finite ranges of concentrations. Perturbations are defined by finite ranges of concentrations ... Keywords: MCA metabolic control analysis, flux control coefficients, global sensitivity, homeostasis

Zelimir Kurtanjek

2009-03-01T23:59:59.000Z

422

Proceedings: 2000 NOx Controls Workshop  

Science Conference Proceedings (OSTI)

The 2000 EPRI workshop on nitrogen oxide (NOx) controls for utility boilers provided a medium for member utilities to augment their knowledge of recent operating experience and developments on NOx control technologies. The event focused on improving methods of compliance with emission regulations mandated by the Clean Air Act Amendments (CAAA) of 1990 without jeopardizing efficiency and plant performance.

2001-04-10T23:59:59.000Z

423

TIMEOPTIMAL CONTROL FOR UNDERWATER VEHICLES  

E-Print Network (OSTI)

TIME­OPTIMAL CONTROL FOR UNDERWATER VEHICLES M. Chyba #,1 N.E. Leonard #,1 E.D. Sontag ##,2 problems for a special class of controlled mechanical systems, underwater vehicles. Lie algebras associated­optimal trajectories. We apply the general theory to a model of an underwater vehicle and illustrate our results

Sontag, Eduardo

424

Energy-efficient congestion control  

Science Conference Proceedings (OSTI)

Various link bandwidth adjustment mechanisms are being developed to save network energy. However, their interaction with congestion control can significantly reduce network throughput, and is not well understood. We firstly put forward a framework to ... Keywords: bandwidth adjustment, congestion control, stability

Lingwen Gan; Anwar Walid; Steven Low

2012-06-01T23:59:59.000Z

425

Dual control active superconductive devices  

DOE Patents (OSTI)

A superconducting active device has dual control inputs and is constructed such that the output of the device is effectively a linear mix of the two input signals. The device is formed of a film of superconducting material on a substrate and has two main conduction channels, each of which includes a weak link region. A first control line extends adjacent to the weak link region in the first channel and a second control line extends adjacent to the weak link region in the second channel. The current flowing from the first channel flows through an internal control line which is also adjacent to the weak link region of the second channel. The weak link regions comprise small links of superconductor, separated by voids, through which the current flows in each channel. Current passed through the control lines causes magnetic flux vortices which propagate across the weak link regions and control the resistance of these regions. The output of the device taken across the input to the main channels and the output of the second main channel and the internal control line will constitute essentially a linear mix of the two input signals imposed on the two control lines. The device is especially suited to microwave applications since it has very low input capacitance, and is well suited to being formed of high temperature superconducting materials since all of the structures may be formed coplanar with one another on a substrate.

Martens, Jon S. (Albuquerque, NM); Beyer, James B. (Madison, WI); Nordman, James E. (Madison, WI); Hohenwarter, Gert K. G. (Madison, WI)

1993-07-20T23:59:59.000Z

426

Intrinsically resilient energy control systems  

Science Conference Proceedings (OSTI)

To preserve critical energy control functions while under attack, it is necessary to perform comprehensive analysis on the root cause and impact of an ongoing cyber intrusion without sacrificing the availability of energy delivery. In this position paper, ... Keywords: cybersecurity, data integration, energy control system, intrusion-tolerant scada, knowledge base, ontology, root cause analysis, semantic annotation, situational awareness

Frederick Sheldon; Daniel Fetzer; David Manz; Jingshan Huang; Stuart Goose; Thomas Morris; Jiangbo Dang; Jonathan Kirsch; Dong Wei

2013-01-01T23:59:59.000Z

427

AQUATIC PLANT CONTROL RESEARCH PROGRAM  

E-Print Network (OSTI)

AQUATIC PLANT CONTROL RESEARCH PROGRAM TECHNICAL REPORT A-S3-1 AERIAL SURVEY TECHNIQUES TO MAP NUMBER rGOVT ACCESSION NO. 3. Technical Report A-83-l 4. TI T L E (""d Subtitle) 5. AERIAL SURVEY···..,." -.d Identity by block numb,,,) Aerial surveys Computer applications Aquatic plant control Mapping

US Army Corps of Engineers

428

Johnson Controls | Open Energy Information  

Open Energy Info (EERE)

Controls Controls Jump to: navigation, search Logo: Johnson Controls Name Johnson Controls Address 5757 N. Green Bay Avenue Place Milwaukee, Wisconsin Zip 53201 Sector Efficiency Stock Symbol JCI Website http://www.johnsoncontrols.com Coordinates 43.1219149°, -87.9353576° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.1219149,"lon":-87.9353576,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

429

Moisture Control | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moisture Control Moisture Control Moisture Control May 30, 2012 - 10:41am Addthis Controlling moisture can make your home more energy-efficient, less costly to heat and cool, more comfortable, and prevent mold growth. Controlling moisture can make your home more energy-efficient, less costly to heat and cool, more comfortable, and prevent mold growth. What does this mean for me? Moisture can support the growth of mold and mildew and can even rot structural members in extreme cases. Effective strategies for addressing moisture in your home will depend on your climate and how your home is constructed. How does it work? Moisture can enter a home as water vapor and as liquid water. Sealing air leaks and providing paths for liquid water to move away from the building can prevent moisture from causing health and comfort problems in your home.

430

SOWFA + Super Controller User's Manual  

DOE Green Energy (OSTI)

SOWFA + Super Controller is a modification of the NREL's SOWFA tool which allows for a user to apply multiturbine or centralized wind plant control algorithms within the high-fidelity SOWFA simulation environment. The tool is currently a branch of the main SOWFA program, but will one day will be merged into a single version. This manual introduces the tool and provides examples such that a user can implement their own super controller and set up and run simulations. The manual only discusses enough about SOWFA itself to allow for the customization of controllers and running of simulations, and details of SOWFA itself are reported elsewhere Churchfield and Lee (2013); Churchfield et al. (2012). SOWFA + Super Controller, and this manual, are in alpha mode.

Fleming, P.; Gebraad, P.; Churchfield, M.; Lee, S.; Johnson, K.; Michalakes, J.; van Wingerden, J. W.; Moriarty, P.

2013-08-01T23:59:59.000Z

431

Reactor control rod timing system  

DOE Patents (OSTI)

A fluid driven jet-edge whistle timing system for control rods of a nuclear reactor for producing real-time detection of the timing of each control rod in its scram operation. An important parameter in reactor safety, particularly for liquid metal fast breeder reactors (LMFBR), is the time deviation between the time the control rod is released and the time the rod actually reaches the down position. The whistle has a nearly pure tone signal with center frequency (above 100 kHz) far above the frequency band in which the energy of the background noise is concentrated. Each control rod can be fitted with a whistle with a different frequency so that there is no ambiguity in differentiating the signal from each control rod.

Wu, Peter T. K. (Clifton Park, NY)

1982-01-01T23:59:59.000Z

432

NETL: CO2 Emissions Control  

NLE Websites -- All DOE Office Websites (Extended Search)

Home > Technologies > Coal & Power Systems > Innovations for Existing Plants > CO2 Emissions Control Home > Technologies > Coal & Power Systems > Innovations for Existing Plants > CO2 Emissions Control Innovations for Existing Plants CO2 Emissions Control RD&D Roadmap Technology Update DOE/NETL Advanced CO2 Capture R&D Program: Technology Update DOE/NETL Advanced CO2 Capture R&D Program Accomplishments DOE/NETL Carbon Dioxide Capture and Storage RD&D Roadmap 2013 NETL CO2 Capture Technology Meeting Presentations DOE/NETL's Monthly Carbon Sequestration Newsletter Program Goals and Targets Pre-Combustion CO2 Control Post-Combustion CO2 Control Advanced Combustion CO2 Compression Other Systems Analysis Regulatory Drivers Reference Shelf Carbon capture involves the separation of CO2 from coal-based power plant flue gas or syngas. There are commercially available 1st-Generation CO2

433

Quantum control theory and applications: A survey  

E-Print Network (OSTI)

This paper presents a survey on quantum control theory and applications from a control systems perspective. Some of the basic concepts and main developments (including open-loop control and closed-loop control) in quantum control theory are reviewed. In the area of open-loop quantum control, the paper surveys the notion of controllability for quantum systems and presents several control design strategies including optimal control, Lyapunov-based methodologies, variable structure control and quantum incoherent control. In the area of closed-loop quantum control, the paper reviews closed-loop learning control and several important issues related to quantum feedback control including quantum filtering, feedback stabilization, LQG control and robust quantum control.

Daoyi Dong; Ian R Petersen

2009-10-13T23:59:59.000Z

434

Quantum control theory and applications: A survey  

E-Print Network (OSTI)

This paper presents a survey on quantum control theory and applications from a control systems perspective. Some of the basic concepts and main developments (including open-loop control and closed-loop control) in quantum control theory are reviewed. In the area of open-loop quantum control, the paper surveys the notion of controllability for quantum systems and presents several control design strategies including optimal control, Lyapunov-based methodologies, variable structure control and quantum incoherent control. In the area of closed-loop quantum control, the paper reviews closed-loop learning control and several important issues related to quantum feedback control including quantum filtering, feedback stabilization, LQG control and robust quantum control.

Dong, Daoyi

2009-01-01T23:59:59.000Z

435

Securing Supervisory Control and Data Acquisition (SCADA) ...  

Science Conference Proceedings (OSTI)

... Acquisition (SCADA) and Industrial Control Systems (ICS) Linkage of Security and Safety in SCADA and Industrial Control Systems ...

2013-04-09T23:59:59.000Z

436

Meeting Residential Ventilation Standards Through Dynamic Control...  

NLE Websites -- All DOE Office Websites (Extended Search)

Meeting Residential Ventilation Standards Through Dynamic Control of Ventilation Systems Title Meeting Residential Ventilation Standards Through Dynamic Control of Ventilation...

437

How to Select a Termite Control Service  

E-Print Network (OSTI)

This publication explains how to choose a termite control service and what control options are available for homeowners.

Gold, Roger E.; Merchant, Michael E.; Howell Jr., Harry N.; Glenn, Grady J.

2005-12-05T23:59:59.000Z

438

Internal Controls Over Sensitive Compartmented Information Access...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Controls Over Sensitive Compartmented Information Access for Selected Field Intelligence Elements, IG-0796 Internal Controls Over Sensitive Compartmented Information Access...

439

Control Systems Security Publications Library | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electricity Advisory Committee Technology Development Transmission Planning Smart Grid Energy Delivery Systems Cybersecurity Control Systems Security News Archive Control...

440

Catalysts for Lean Engine Emission Control - Emissions & Emission Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

Catalysts for Lean Engine Emission Control Catalysts for Lean Engine Emission Control Catalysts for controlling NOx from lean engines are studied in great detail at FEERC. Lean NOx Traps (LNTs) and Selective Catalytic Reduction (SCR) are two catalyst technologies of interest. Catalysts are studied from the nanoscale to full scale. On the nanoscale, catalyst powders are analyzed with chemisorptions techniques to determine the active metal surface area where catalysis occurs. Diffuse Reflectance Infrared Fourier Transform (DRIFT) spectroscopy is used to observe the chemical reactions occurring on the catalyst surface during catalyst operation. Both powder and coated catalyst samples are analyzed on bench flow reactors in controlled simulated exhaust environments to better characterize the chemical

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

ELECTRONIC CONTROLLER DEVELOPMENT AND EVALUATION OF CONTROL STRATEGIES  

E-Print Network (OSTI)

at the 3rd Annual Solar Heating and Cooling R&D Contractors'Control System for Solar Heating and Cooling", Lmvrencecapable of operating a solar heating and cooling system in a

Wahlig, M.

2011-01-01T23:59:59.000Z

442

NETL: Mercury Emissions Control Technologies - Evaluation of Control  

NLE Websites -- All DOE Office Websites (Extended Search)

Evaluation of Control Strategies to Effectively Meet 70 - 90% Evaluation of Control Strategies to Effectively Meet 70 - 90% Mercury Reduction on an Eastern Bituminous Coal Cyclone Boiler with SCR The overall objective of this project is to assess the potential for significant mercury control, between 50 and 90% above baseline, by sorbent injection for the challenging technical process configuration at Public Service of New Hampshire Company Merrimack Station Unit No. 2. The primary emphasis of this project is to evaluate the performance of mercury sorbent injection, but the effect of co-benefits from SO3 mitigation on mercury control will also be explored. Also in this program the performance capabilities of mercury measurement techniques in challenging flue-gas environment will be assessed and the impact of activated carbon injection on fly ash disposal options will be investigated.

443

NETL: Advanced NOx Emissions Control: Control Technology - ALTA...  

NLE Websites -- All DOE Office Websites (Extended Search)

of the burner design is to achieve homogeneity of the combustion products in the boiler. Not only does this create ideal conditions for combustion-related NOx control, it...

444

Pollution Control: Erosion and Sedimentation Control (Maine) | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Erosion and Sedimentation Control (Maine) Erosion and Sedimentation Control (Maine) Pollution Control: Erosion and Sedimentation Control (Maine) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Maine Program Type Siting and Permitting Provider Department of Environmental Proection A person who conducts, or causes to be conducted, an activity that involves

445

Source control strategy accelerates remediation  

SciTech Connect

Shallow land burial of ion-level radioactive wastes at ORNL has resulted in the release of contaminants into surrounding soil, groundwater, and surface water. Multiple contaminated areas occurring in close proximity make it difficult to relate contaminant releases to a specific site. To address this issue, similar and contiguous contaminated sites within the same drainage area have been combined into Waste Area Groupings. These Waste Area Groupings were prioritized and became the focus of the Comprehensive Environmental Response, Compensation, and Liability Act remediation process. Since the majority of the groupings are in the White Oak Creek drainage basin, the remediation strategy is to control contaminant releases from these source areas first, followed by remediation of White Oak Creek. In planning the remediation program, it became clear that until the issues of ultimate land use and institutional control, waste treatment technologies, and waste disposal facilities are resolved, final remediation objectives cannot be defined and remedial alternatives cannot be evaluated. Consequently, instead of postponing remedial actions until these issues are resolved, a strategy to control the sources of contaminant release with a serie s of interim actions was developed. In the near term, this strategy reduces off-site risk by eliminating contaminant releases and controls on-site risk through institutional control. Source control will allow time to achieve consensus on long-term institutional control and land use issues to develop appropriate treatment technologies, and to construct the necessary disposal facilities without further environmental degradation.

Garland, S.B. II [Oak Ridge National Lab., TN (United States); Hammond, R. [Environmental Protection Agency, Atlanta, GA (United States). Region IV

1993-06-01T23:59:59.000Z

446

EPRI BWR Iron Control Monitoring Final Report  

Science Conference Proceedings (OSTI)

This report summarizes the state of iron control in U.S. BWRs as of July 1999 and documents the implementation and performance status of new iron control technologies. Issues involving the relationship between iron control and radiation dose control, iron control with deep beds, iron control with filters, and iron addition are documented, and areas for future research are noted.

1999-09-16T23:59:59.000Z

447

Adaptive Fuzzy PID Control for Boiler Deaerator  

Science Conference Proceedings (OSTI)

The boiler deaerator temperature control system is a non-linear, time-varying, delay control process. It can not achieve satisfying effect using traditional control algorithm to control deaerator water temperature, the paper proposes an adaptive fuzzy ... Keywords: Deaerator, Adaptive, Fuzzy control, PID control

Lei Jinli

2012-08-01T23:59:59.000Z

448

Fossil Plant Instrumentation and Control Guidelines  

Science Conference Proceedings (OSTI)

Poor control loop performance can make a unit difficult and more costly to operate. Most control engineers and technicians will agree that controller tuning plays a major role in control loop performance, but few of them have actually received formal training and gained the experience necessary to tune and troubleshoot control loops effectively. A systematic approach to controller tuning is rarely followed, and ...

2012-12-12T23:59:59.000Z

449

Means for controlling battery chargers  

SciTech Connect

A battery charger control device is described that senses the placement of a battery across control terminals and utilizes the voltage thereof to place into conduction a transistor which actuates a relay which turns on a battery charger, which thereafter, monitors the the charge condition of the battery as determined by the voltage supplied to a voltage following circuit from the control terminals, and which actuates an electronic switch after the elapse of a predetermined period of time after the battery has attained a fully charged condition as determined by the voltage of the battery as presented to the voltage following circuit.

Ballman, G.C.

1980-09-16T23:59:59.000Z

450

Electronics and hydraulics control transmission  

SciTech Connect

Caterpillar engineers have combined electronics and hydraulics for improved transmission control and productivity. The control system had extensive field test experience during development. The system accumulated more than 100,000 hours on 17 vehicles, with individual vehicle times in the 2000-10,000-hour range. Job sites were chosen to test the system over a wide range of applications and locales. The EPTC components are CAT-designed and made by outside suppliers. The components must comply with CAT designs and specifications. All components are 100% functionally tested. The control box is computer-tested functionally at the supplier and at CAT before vehicle installation.

Morris, H.C.; Sorrells, G.K.

1986-04-01T23:59:59.000Z

451

RTP Controls | Open Energy Information  

Open Energy Info (EERE)

RTP Controls RTP Controls Jump to: navigation, search Name RTP Controls Place Woodstock, Georgia Product Georgia-based energy management company. Coordinates 38.890218°, -78.49849° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":38.890218,"lon":-78.49849,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

452

NETL: CO2 Emissions Control  

NLE Websites -- All DOE Office Websites (Extended Search)

Post-Combustion CO2 Control Post-Combustion CO2 Control Post-combustion CO2 control systems separate CO2 from the flue gas produced by conventional coal combustion in air. The flue gas is at atmospheric pressure and has a CO2 concentration of 10-15 volume percent. Read More! Capturing CO2 under these conditions is challenging because: (1) the low pressure and dilute concentration dictate a high total volume of gas to be treated; (2) trace impurities in the flue gas tend to reduce the effectiveness of the CO2 separation processes; and (3) compressing captured CO2 from atmospheric pressure to pipeline pressure (1,200 - 2,200 pounds per square inch) represents a large parasitic energy load. Plant Picture DOE/NETL's post-combustion CO2 control technology R&D program includes

453

Seasonalepisodic control of acid deposition  

E-Print Network (OSTI)

This report contains the climatological, technical and economic factors for episodic and seasonal control of emissions in existing power plants. Analyzing a large data set of acid deposition for the years 1982-85, we find ...

Fay, James A.

1988-01-01T23:59:59.000Z

454

Optimal adaptive control with ?LQG.  

E-Print Network (OSTI)

??This thesis introduces ?LQG, the hyper extension of the Linear Quadratic Gaussian Regulator, for solving general purpose (locally optimal) nonlinear adaptive control on multiple-input multiple-output (more)

Wendt, Luke

2013-01-01T23:59:59.000Z

455

Montana Radon Control Act (Montana)  

Energy.gov (U.S. Department of Energy (DOE))

The Radon Control Act regulates the emission of radon, the gaseous decay products of uranium or thorium. The Act addresses operator certification of radon-producing facilities, testing and...

456

Portable, remote environmental control system  

Science Conference Proceedings (OSTI)

A portable thermostat is coupled to the control unit of a heating or cooling device through a radio link. The RF signal transmitted by the thermostat is encoded and then decoded by the control unit in order to prevent interference with other similar devices. In order to maximize the life of a battery powering the thermostat, the thermostat calls for the energization of a heating or cooling device by transmitting the RF signal at widely spaced intervals. The heating or cooling device is energized by shunting a pair of terminals, thereby completing an AC control loop. The unit applies the terminals to a storage copacitor during a small portion of each EC cycle to power the control unit while shunting the terminals during the remaining part of the cycle.

Cherry, R.L.; Maes, R.P.; Pfeiffer, G.F.

1984-02-28T23:59:59.000Z

457

Advanced gray rod control assembly  

DOE Patents (OSTI)

An advanced gray rod control assembly (GRCA) for a nuclear reactor. The GRCA provides controlled insertion of gray rod assemblies into the reactor, thereby controlling the rate of power produced by the reactor and providing reactivity control at full power. Each gray rod assembly includes an elongated tubular member, a primary neutron-absorber disposed within the tubular member said neutron-absorber comprising an absorber material, preferably tungsten, having a 2200 m/s neutron absorption microscopic capture cross-section of from 10 to 30 barns. An internal support tube can be positioned between the primary absorber and the tubular member as a secondary absorber to enhance neutron absorption, absorber depletion, assembly weight, and assembly heat transfer characteristics.

Drudy, Keith J; Carlson, William R; Conner, Michael E; Goldenfield, Mark; Hone, Michael J; Long, Jr., Carroll J; Parkinson, Jerod; Pomirleanu, Radu O

2013-09-17T23:59:59.000Z

458

Cockroaches...Recognition and Control  

E-Print Network (OSTI)

Cockroaches rank high on the homeowner's list of insect problems. This publication helps the reader recognize the various species of cockroaches and understand their biology and behavior. It also describes various methods of chemical and non-chemical control.

Gold, Roger E.; Brown, Elizabeth; Merchant, Michael E.; Engler, Kimberly

2005-09-26T23:59:59.000Z

459

NETL: CO2 Emissions Control  

NLE Websites -- All DOE Office Websites (Extended Search)

CO2 Emissions Control - Program Goals and Targets The Clean Coal Research Program (CCRP) is currently pursuing the demonstration of 1st-Generation Carbon Capture and Storage (CCS)...

460

Implementing controlled languages in GF  

Science Conference Proceedings (OSTI)

This paper introduces GF, Grammatical Framework, as a tool for implementing controlled languages. GF provides a high-level grammar formalism and a resource grammar library that make it easy to write grammars that cover similar fragments in several natural ...

Krasimir Angelov; Aarne Ranta

2009-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Quadratic control of quantum processes  

E-Print Network (OSTI)

Within the framework of the Accardi-Fagnola-Quaegebeur (AFQ) representation free calculus of \\cite{b}, we consider the problem of controlling the size of a quantum stochastic flow generated by a unitary stochastic evolution affected by quantum noise. In the case when the evolution is driven by first order white noise (which includes quantum Brownian motion) the control is shown to be given in terms of the solution of an algebraic Riccati equation. This is done by first solving the problem of controlling (by minimizing an associated quadratic performance criterion) a stochastic process whose evolution is described by a stochastic differential equation of the type considerd in \\cite{b}. The solution is given as a feedback control law in terms of the solution of a stochastic Riccati equation.

Luigi Accardi; Andreas Boukas

2013-08-07T23:59:59.000Z

462

Controlling the Inner Electron Dance  

NLE Websites -- All DOE Office Websites (Extended Search)

2004 | 2003 | 2002 | 2001 2000 Subscribe to APS News rss feed Controlling the Inner Electron Dance JANUARY 9, 2012 Bookmark and Share Linda Young Linda Young, Director of the...

463

Permanent Load Shift Control Strategies  

NLE Websites -- All DOE Office Websites (Extended Search)

of Permanent Load Shifting for HVAC and other storage assets as it relates to summer on-peak demand, how it can be dynamically and autonomously controlled, and its relationship...

464

Lighting Controls | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Use dimmers to save energy and add ambience to a room Check the packages of CFL and LED lightbulbs to see if they are compatible with dimmers Use lighting controls to...

465

Publications inventory control and distribution  

Science Conference Proceedings (OSTI)

Most publications stocked by STSC, Inc. are produced at headquarters. A small number of other publications, however, are ordered from outside vendors and then stocked at headquarters for distribution. Past procedures for inventory control and distribution ...

Deborah R. Richardson

1983-04-01T23:59:59.000Z

466

Building load control and optimization  

E-Print Network (OSTI)

Researchers and practitioners have proposed a variety of solutions to reduce electricity consumption and curtail peak demand. This research focuses on load control by improving the operations in existing building HVAC ...

Xing, Hai-Yun Helen, 1976-

2004-01-01T23:59:59.000Z

467

REACTOR SYSTEM AND CONTROL VALVE  

DOE Patents (OSTI)

Valves have been developed for controlling the flow of gaseous fluid through a passage or conduit. The valves have particular application in the cooling systems of gas; cooled reactors. (R.J.S.)

Fortescue, P.; Rickard, C.; Rose, D.

1963-01-01T23:59:59.000Z

468

LCLS CDR Chapter 11 - Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

of the existing accelerator complex used for LCLS will also serve non-LCLS functions. The control system architecture for the LCLS will be the same as that used currently for...

469

Louisiana Air Control Law (Louisiana)  

Energy.gov (U.S. Department of Energy (DOE))

This law states regulations for air quality control and states the powers and duties of the secretary of environmental quality. It provides information about permits and licenses, air quality...

470

Pollution Control Act (South Carolina)  

Energy.gov (U.S. Department of Energy (DOE))

This Act declares the maintenance of reasonable standards of purity of air and water to be the public policy of the state. The Act authorizes the Department of Health and Environmental Control to...

471

Controlling acid rain : policy issues  

E-Print Network (OSTI)

The policy and regulatory ramifications of U.S. acid rain control programs are examined; particularly, the alternative of a receptor-oriented strategy as constrasted to emission-oriented proposals (e.g., the Mitchell bill) ...

Fay, James A.

1983-01-01T23:59:59.000Z

472

Nuclear reactor control room construction  

DOE Patents (OSTI)

A control room for a nuclear plant is disclosed. In the control room, objects labelled 12, 20, 22, 26, 30 in the drawing are no less than four inches from walls labelled 10.2. A ceiling contains cooling fins that extend downwards toward the floor from metal plates. A concrete slab is poured over the plates. Studs are welded to the plates and are encased in the concrete. 6 figures.

Lamuro, R.C.; Orr, R.

1993-11-16T23:59:59.000Z

473

Feedback control of spin systems  

E-Print Network (OSTI)

The feedback stabilization problem for ensembles of coupled spin 1/2 systems is discussed from a control theoretic perspective. The noninvasive nature of the bulk measurement allows for a fully unitary and deterministic closed loop. The Lyapunov-based feedback design presented does not require spins that are selectively addressable. With this method, it is possible to obtain control inputs also for difficult tasks, like suppressing undesired couplings in identical spin systems.

Claudio Altafini

2006-01-03T23:59:59.000Z

474

Instrumentation, Controls, and Automation Newsletter  

Science Conference Proceedings (OSTI)

This is the first newsletter for the Instrumentation, Controls, and Automation program of EPRI. This newsletter summarizes results of past and current projects and provides an overview of projects that will be completed in 2010. The first article describes the recently prototyped software Asset Fault Signature Database. The second article, "Inter-Control Center Communications Protocol Benefits Assessment," describes a previously completed EPRI/Southern Company tailored collaboration project. "Survey of C...

2009-12-22T23:59:59.000Z

475

Cold Controlled Chemistry Roman Krems  

E-Print Network (OSTI)

· Possible applications of cold controlled chemistry #12; #¢¡ ©£¡ ! # %¢ ¥¤6#¢¡§¦ # ¤¨¤§! # ¤§¦ Centrifugal processes remains a significant challenge..." Paul Brumer, DAMOP 2007, Bulletin of the APS #12;Thermal gas is difficult to control #12;Low temperature gas under external fieldE #12;E BLow temperature gas

Krems, Roman

476

PIA - Weapons Data Control Systems | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Weapons Data Control Systems PIA - Weapons Data Control Systems PIA - Weapons Data Control Systems PIA PIA - Weapons Data Control Systems...

477

Lighting Controls in Commercial Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting Controls in Commercial Buildings Lighting Controls in Commercial Buildings Title Lighting Controls in Commercial Buildings Publication Type Report Year of Publication 2012 Authors Williams, Alison A., Barbara A. Atkinson, Karina Garbesi, Erik Page, and Francis M. Rubinstein Series Title The Journal of the Illuminating Engineering Society of North America Volume 8 Document Number 3 Pagination 161-180 Date Published January ISBN Number 1550-2716 Keywords controls, daylighting, energy, occupancy sensors, tuning. Abstract Researchers have been quantifying energy savings from lighting controls in commercial buildings for more than 30 years. This study provides a meta-analysis of lighting energy savings identified in the literature-240 savings estimates from 88 papers and case studies, categorized into daylighting strategies, occupancy strategies, personal tuning, and institutional tuning. Beginning with an overall average of savings estimates by control strategy, successive analytical filters are added to identify potential biases introduced to the estimates by different analytical approaches. Based on this meta-analysis, the bestestimates of average lighting energy savings potential are 24 percent for occupancy, 28 percent for daylighting, 31 percent for personal tuning, 36 percent for institutional tuning, and 38 percent for multiple approaches. The results also suggest that simulations significantly overestimate (by at least 10 percent) the average savings obtainable from daylighting in actual buildings.

478

Advanced nuclear plant control complex  

DOE Patents (OSTI)

An advanced control room complex for a nuclear power plant, including a discrete indicator and alarm system (72) which is nuclear qualified for rapid response to changes in plant parameters and a component control system (64) which together provide a discrete monitoring and control capability at a panel (14-22, 26, 28) in the control room (10). A separate data processing system (70), which need not be nuclear qualified, provides integrated and overview information to the control room and to each panel, through CRTs (84) and a large, overhead integrated process status overview board (24). The discrete indicator and alarm system (72) and the data processing system (70) receive inputs from common plant sensors and validate the sensor outputs to arrive at a representative value of the parameter for use by the operator during both normal and accident conditions, thereby avoiding the need for him to assimilate data from each sensor individually. The integrated process status board (24) is at the apex of an information hierarchy that extends through four levels and provides access at each panel to the full display hierarchy. The control room panels are preferably of a modular construction, permitting the definition of inputs and outputs, the man machine interface, and the plant specific algorithms, to proceed in parallel with the fabrication of the panels, the installation of the equipment and the generic testing thereof.

Scarola, Kenneth (Windsor, CT); Jamison, David S. (Windsor, CT); Manazir, Richard M. (North Canton, CT); Rescorl, Robert L. (Vernon, CT); Harmon, Daryl L. (Enfield, CT)

1993-01-01T23:59:59.000Z

479

Adaptive hybrid impedance control of robot manipulators: a comparative study  

Science Conference Proceedings (OSTI)

Keywords: direct adaptive control, hybrid impedance control, passivity-based adaptive control, robotics

Lus F. Baptista; Jos M. G. S da Costa

1997-01-01T23:59:59.000Z

480

Optimal Control of Distributed Energy Resources using Model Predictive Control  

Science Conference Proceedings (OSTI)

In an isolated power system (rural microgrid), Distributed Energy Resources (DERs) such as renewable energy resources (wind, solar), energy storage and demand response can be used to complement fossil fueled generators. The uncertainty and variability due to high penetration of wind makes reliable system operations and controls challenging. In this paper, an optimal control strategy is proposed to coordinate energy storage and diesel generators to maximize wind penetration while maintaining system economics and normal operation. The problem is formulated as a multi-objective optimization problem with the goals of minimizing fuel costs and changes in power output of diesel generators, minimizing costs associated with low battery life of energy storage and maintaining system frequency at the nominal operating value. Two control modes are considered for controlling the energy storage to compensate either net load variability or wind variability. Model predictive control (MPC) is used to solve the aforementioned problem and the performance is compared to an open-loop look-ahead dispatch problem. Simulation studies using high and low wind profiles, as well as, different MPC prediction horizons demonstrate the efficacy of the closed-loop MPC in compensating for uncertainties in wind and demand.

Mayhorn, Ebony T.; Kalsi, Karanjit; Elizondo, Marcelo A.; Zhang, Wei; Lu, Shuai; Samaan, Nader A.; Butler-Purry, Karen

2012-07-22T23:59:59.000Z

Note: This page contains sample records for the topic "08-02 omb control" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Dual control active superconductive devices  

Science Conference Proceedings (OSTI)

A dual control active superconducting device is described comprising; (a) a first device having a first main conduction channel formed of a film of superconductor on a substrate, an active weak link region interposed in the first main conduction channel, the active weak link region composed of a plurality of links formed of a thin film of superconductor separated by non-superconductive voids, the thickness and lateral dimensions of the links selected such that magnetic flux can propagate across the weak link region when it is superconducting, and a first control line having a portion adjacent to the active weak link region of the first main conduction channel such that current in the first control line will impose a magnetic flux on the weak link region; (b) a second superconducting device having a second main conduction channel formed of a film of superconductor on a substrate, an active weak link region interposed in the second main conduction channel, the active weak link region composed of at least one link formed of a thin film of superconductor separated by non-superconductive voids, the thickness and lateral dimensions of the links selected such that magnetic flux can propagate across the weak link region when it is superconducting, and a second control line having a portion adjacent to the active weak link region such that current in the second control line will impose a magnetic flux on the weak link region in the second main conduction channel; (c) an internal control line electrically connected to receive the current passed through the first main conduction channel and having a portion adjacent to the active weak link region of the second main conduction channel such that a current in the internal control line will impose a magnetic flux on the weak link region; and (d) electrical connectors connected to provide input current to the first and second main conduction channels and to conduct the output current.

Martens, J.S.; Beyer, J.B.; Nordman, J.E.; Hohenwarter, G.K.G.

1993-07-20T23:59:59.000Z

482

Adaptive optimal control: an algorithm for direct digital control  

SciTech Connect

An algorithm for applying advanced control concepts in heating, ventilating, and air conditioning (HVAC) systems has been developed at the Los Alamos Scientific Laboratory (LASL). The algorithm uses optimal control and is adaptive in nature. Simulations for a solar heated and cooled building indicate that use of this algorithm can accomplish a substantial savings in auxiliary energy consumption. In this paper, the algorithm is described and its application is illustrated with a simple example. Simulation results for a more complex system are also presented. The hardware, including the digital computer, needed to implement this algorithm is briefly discussed.

Farris, D.R.; McDonald, T.E.

1980-01-01T23:59:59.000Z

483

Fuzzy adaptive control for the actuators position control and modeling of an expert system  

Science Conference Proceedings (OSTI)

In this paper, a heating, ventilating and air-conditioning (HVAC) system was designed and two different damper gap rates (actuators position) of the HVAC system were controlled by a conventional PID (proportional-integral-derivative) controller. One ... Keywords: Actuator position control, Air flow control, An expert system, Fuzzy adaptive control (FAC), Humidity control, Modeling, PID control, Software architecture

Servet Soyguder; Hasan Alli

2010-03-01T23:59:59.000Z

484

Control Engineering Practice 14 (2006) 757767 Model predictive control for ramp metering of motorway traffic  

E-Print Network (OSTI)

Control Engineering Practice 14 (2006) 757­767 Model predictive control for ramp metering metering implemented. Two types of controllers are compared: a traditional ALINEA based controller and a model predictive control based ramp metering controller. In order to evaluate the controllers

485

Electron gun controlled smart structure  

SciTech Connect

Disclosed is a method and system for actively controlling the shape of a sheet of electroactive material; the system comprising: one or more electrodes attached to the frontside of the electroactive sheet; a charged particle generator, disposed so as to direct a beam of charged particles (e.g. electrons) onto the electrode; a conductive substrate attached to the backside of the sheet; and a power supply electrically connected to the conductive substrate; whereby the sheet changes its shape in response to an electric field created across the sheet by an accumulation of electric charge within the electrode(s), relative to a potential applied to the conductive substrate. Use of multiple electrodes distributed across on the frontside ensures a uniform distribution of the charge with a single point of e-beam incidence, thereby greatly simplifying the beam scanning algorithm and raster control electronics, and reducing the problems associated with "blooming". By placing a distribution of electrodes over the front surface of a piezoelectric film (or other electroactive material), this arrangement enables improved control over the distribution of surface electric charges (e.g. electrons) by creating uniform (and possibly different) charge distributions within each individual electrode. Removal or deposition of net electric charge can be affected by controlling the secondary electron yield through manipulation of the backside electric potential with the power supply. The system can be used for actively controlling the shape of space-based deployable optics, such as adaptive mirrors and inflatable antennae.

Martin, Jeffrey W. (Albuquerque, NM); Main, John Alan (Lexington, KY); Redmond, James M. (Albuquerque, NM); Henson, Tammy D. (Albuquerque, NM); Watson, Robert D. (Tijeras, NM)

2001-01-01T23:59:59.000Z

486

Neutral particle beam intensity controller  

DOE Patents (OSTI)

A neutral beam intensity controller is provided for a neutral beam generator in which a neutral beam is established by accelerating ions from an ion source into a gas neutralizer. An amplitude modulated, rotating magnetic field is applied to the accelerated ion beam in the gas neutralizer to defocus the resultant neutral beam in a controlled manner to achieve intensity control of the neutral beam along the beam axis at constant beam energy. The rotating magnetic field alters the orbits of ions in the gas neutralizer before they are neutralized, thereby controlling the fraction of neutral particles transmitted out of the neutralizer along the central beam axis to a fusion device or the like. The altered path or defocused neutral particles are sprayed onto an actively cooled beam dump disposed perpendicular to the neutral beam axis and having a central open for passage of the focused beam at the central axis of the beamline. Virtually zero therough 100% intensity control is achieved by varying the magnetic field strength without altering the ion source beam intensity or its species yield.

Dagenhart, William K. (Oak Ridge, TN)

1986-01-01T23:59:59.000Z

487

CONTROL AND FAULT DETECTOR CIRCUIT  

DOE Patents (OSTI)

A power control and fault detectcr circuit for a radiofrequency system is described. The operation of the circuit controls the power output of a radio- frequency power supply to automatically start the flow of energizing power to the radio-frequency power supply and to gradually increase the power to a predetermined level which is below the point where destruction occurs upon the happening of a fault. If the radio-frequency power supply output fails to increase during such period, the control does not further increase the power. On the other hand, if the output of the radio-frequency power supply properly increases, then the control continues to increase the power to a maximum value. After the maximumn value of radio-frequency output has been achieved. the control is responsive to a ''fault,'' such as a short circuit in the radio-frequency system being driven, so that the flow of power is interrupted for an interval before the cycle is repeated.

Winningstad, C.N.

1958-04-01T23:59:59.000Z

488

What's new in well control  

Science Conference Proceedings (OSTI)

Drillers know that the most important tools used in well control are preparation and knowledge. That fact is reinforced by government agency requirements for certification of responsible people on the rig, particularly in sensitive public areas like offshore waters. And existing problems like shallow gas blowouts and kick control in conventional wells have been complicated by industry's move to horizontal wells and underbalanced drilling. The International Association of Drilling Contractors (IADC) in the US and Europe is devoting a major effort to well control technology. It sponsored a comprehensive conference in Houston in November 1993, plus a well control trainer's Roundtable meeting in Houston in March. The IADC Well Control Conference for Europe is scheduled for June 8--10, 1994, in Stavanger, Norway, with an important 22-paper program. In this article, World Oil has selected several presentations from the two US IADC conferences noted above. These selections are noted by the authors as being of wide and current interest to the industry, they include: (1) horizontal well considerations, (2) a proposed new well killing method, (3) underbalanced drilling, (4) a new onsite simulator, and (5) IADC's school accreditation program. Summaries shown here cover only major topics. Original papers should be consulted for important details.

Snyder, R.E.

1994-06-01T23:59:59.000Z

489

Controlling Structures | Open Energy Information  

Open Energy Info (EERE)

Controlling Structures Controlling Structures Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Print PDF Controlling Structures Dictionary.png Controlling Structures: No definition has been provided for this term. Add a Definition Structure Description Associated Topography Tectonic Setting Major Normal Fault Normal faults are structures in which the hanging wall is down dropped along the fault plane relative to the foot wall. They are the predominant type of structure in extensional tectonic environments, but are commonly encountered in a number of geologic settings. Major range front faults account for 3% of structural controls in the Great Basin. Mountainous, Horst and Graben Extensional Tectonics, Rift Zone Termination of a Major Normal Fault Major normal faults sometimes terminate into multiple horsetailing splays that result in increased hydrothermal fluid flux. As of 2011, 22% of all known Basin & Range structures hosting geothermal systems occur at normal fault terminations or tip-lines with multiple closely-spaced faults that enhance permeability. Mountainous, Horst and Graben Extensional Tectonics, Rift Zone

490

Neural hybrid control of manipulators, stability analysis  

Science Conference Proceedings (OSTI)

The design and implementation of adaptive control for nonlinear unknown systems is extremely difficult. The nonlinear adaptive control for assembly robots performing a peg-in-hole insertion is one such an example. The recently intensively studied neural ... Keywords: Constrained control, Force position control, Identification of system, Learning rules and Adaptive control, Neural networks

N. Saadia; Y. Amirat; J. Pontnau; N. K. M'sirdi

2001-01-01T23:59:59.000Z

491

A multivariable predictive fuzzy PID control system  

Science Conference Proceedings (OSTI)

In this paper, a novel multivariable predictive fuzzy-proportional-integral-derivative (F-PID) control system is developed by incorporating the fuzzy and PID control approaches into the predictive control framework. The developed control system has two ... Keywords: BPTT, Control, Fuzzy, LM, Multivariable, PID, Predictive

Aydogan Savran

2013-05-01T23:59:59.000Z

492

XML access control using static analysis  

Science Conference Proceedings (OSTI)

Access control policies for XML typically use regular path expressions such as XPath for specifying the objects for access-control policies. However such access-control policies are burdens to the query engines for XML documents. To relieve this burden, ... Keywords: Access control, XML, XPath, XQuery, automaton, query optimization, schema, static analysis, value-based access control, view schema

Makoto Murata; Akihiko Tozawa; Michiharu Kudo; Satoshi Hada

2006-08-01T23:59:59.000Z

493

Nitrogen Oxides Emission Control Options  

NLE Websites -- All DOE Office Websites (Extended Search)

Nitrogen Nitrogen Oxides Emission Control Options for Coal-Fired Electric Utility Boilers Ravi K. Srivastava and Robert E. Hall U.S. Environmental Protection Agency, National Risk Management Research Laboratory, Air Pollution Prevention and Control Division, Research Triangle Park, NC Sikander Khan and Kevin Culligan U.S. Environmental Protection Agency, Office of Air and Radiation, Clean Air Markets Division, Washington, DC Bruce W. Lani U.S. Department of Energy, National Energy Technology Laboratory, Environmental Projects Division, Pittsburgh, PA ABSTRACT Recent regulations have required reductions in emissions of nitrogen oxides (NO x ) from electric utility boilers. To comply with these regulatory requirements, it is increas- ingly important to implement state-of-the-art NO x con- trol technologies on coal-fired utility boilers. This paper reviews NO x control

494

Surveillance Guides - Work Control Process  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Work Control Process Work Control Process 1.0 Objective The objective of this surveillance guide is to provide lines of inquiry for evaluating the effectiveness of the contractor's work control process. Users should be cognizant that the lines of inquiry need to be further tailored to fit specific facilities or activities in accordance with contractual mechanisms such as Maintenance Implementation Plans, Conduct of Operations Implementation Plans, and the Integrated Safety Management System Description. 2.0 References 2.1 DOE 4330.4B Maintenance Management Program 2.2 48 CFR 1970.5204-2 Department of Energy Acquisition Regulations 2.3 DOE O 5480.19, Conduct of Operations 2.4 10 CFR 830.120, Quality Assurance 3.0 Requirements Implemented This surveillance is conducted to verify implementation of Core

495

Neutral particle beam intensity controller  

DOE Patents (OSTI)

The neutral beam intensity controller is based on selected magnetic defocusing of the ion beam prior to neutralization. The defocused portion of the beam is dumped onto a beam dump disposed perpendicular to the beam axis. Selective defocusing is accomplished by means of a magnetic field generator disposed about the neutralizer so that the field is transverse to the beam axis. The magnetic field intensity is varied to provide the selected partial beam defocusing of the ions prior to neutralization. The desired focused neutral beam portion passes along the beam path through a defining aperture in the beam dump, thereby controlling the desired fraction of neutral particles transmitted to a utilization device without altering the kinetic energy level of the desired neutral particle fraction. By proper selection of the magnetic field intensity, virtually zero through 100% intensity control of the neutral beam is achieved.

Dagenhart, W.K.

1984-05-29T23:59:59.000Z

496

Pulse combustor with controllable oscillations  

DOE Patents (OSTI)

A pulse combustor having thermally induced pulse combustion in a continuously flowing system is described. The pulse combustor is fitted with at lease one elongated ceramic body which significantly increases the heat transfer area in the combustion chamber of the combustor. The ceramic body or bodies possess sufficient mass and heat capacity to ignite the fuel-air charge once the ceramic body or bodies are heated by conventional spark plug initiated combustion so as to provide repetitive ignition and combustion of sequentially introduced fuel-air charges without the assistance of the spark plug and the rapid quenching of the flame after each ignition in a controlled manner so as to provide a selective control over the oscillation frequency and amplitude. Additional control over the heat transfer in the combustion chamber is provided by employing heat exchange mechanisms for selectively heating or cooling the elongated ceramic body or bodies and/or the walls of the combustion chamber.

Richards, George A. (Morgantown, WV); Welter, Michael J. (Columbiana, OH); Morris, Gary J. (Morgantown, WV)

1992-01-01T23:59:59.000Z

497

Computer controlled air conditioning systems  

SciTech Connect

This patent describes an improvement in a computer controlled air conditioning system providing for circulation of air through an air conditioned house in contact with concrete walls requiring a humidity within a critical range. The improvement consists of: a computer for processing sensed environmental input data including humidity and oxygen to produce output control signals for affecting the humidity of the air in the house; provision for an air flow circulation path through the house in contact with the concrete walls; sensing responsive to the amount of oxygen in the house for providing input signals to the computer; mixing for combining with the air in the house a variable amount of fresh atmospheric air to supply fresh oxygen; and humidity modifying means for modifying the humidity of the air flowing in the flow path responsive to the control signals.

Dumbeck, R.F.

1986-02-04T23:59:59.000Z

498

Control Measure Title Reference Number *  

E-Print Network (OSTI)

exhaustive search for emissions reductions to use in meeting federal Clean Air Act requirements for this 2008 PM2.5 Plan. Chapter 6 details the Districts process for developing control measures for reducing emissions of primary PM2.5 and PM2.5 precursors. This Appendix presents the product of this process: a master list of all candidate control measure ideas identified and evaluated for this plan. After assembling Appendix I, the District then screened the candidate measures into several categories: high priority measures to be implemented in the years immediately following plan adoption; measures that might be implemented in future years to allow for expected technology development; and those measures that require further study to identify when they could be implemented and what reductions they could achieve. Candidate control measure descriptions in Appendix I have the following major components:! Title and Number

unknown authors

2008-01-01T23:59:59.000Z

499

Radiological control manual. Revision 1  

SciTech Connect

This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPP and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP.

Kloepping, R.

1996-05-01T23:59:59.000Z

500

Substation control and protection project  

SciTech Connect

This report describes the results of EPRI-sponsored Project RP1359-7, dealing with digital protection and control of transmission class substations. Earlier work involved a study of the feasibility of an integrated protection and control system, specification of functional requirements and selection of the optimum architecture for the system. An integrated system including line, bus and transformer protection was designed, built and laboratory tested. It was subsequently installed at the Deans substation of Public Service Electric and Gas (New Jersey). A standalone, digital transmission line system was built and installed at the Branchburg substation of PSE G, for coordinated line protection with the integrated system. The system is called WESPAC, an acronym for Westinghouse Substation Protection and Control. 52 refs., 174 figs.

Cassel, R.L.; Deliyannides, J.S.; Dzieduszko, J.W.; Harvey, J.H.; Hertz, L.H.; Klancher, F.; Mays, L.M.; McGarry, M.J.; Pettis, L.G.; Pistolese, L.F.; Reuther, J.F.; Sackin, M.; Szarmach, D.J.; Udren, E.A. (Westinghouse ABB Power T and D Co., Coral Springs, FL (USA). Relay and Telecommunications Div.)

1990-04-01T23:59:59.000Z