- Control Engineering Practice 10 (2002) 121132 Robust control of vertical motions in ultra-high rise elevators$
- Journal of Intelligent and Robotic Systems 39: 209225, 2004. 2004 Kluwer Academic Publishers. Printed in the Netherlands.
- Journal of Mechanical Science and Technology 24 (5) (2010) 1127~1139 www.springerlink.com/content/1738-494x
- Design of a Parallel Mechanism Platform for Simulating Six Degrees-of-freedom General Motion Including Continuous 360-degree Spin
- Design of a planar-type high speed parallel mechanism positioning platform with the capability of 180 degrees orientation
- IEEE TRANSACTIONS ON ROBOTICS AND AUTOMATION, VOL. 18, NO. 3, JUNE 2002 367 and limn!1 minifSing=n = b with probability 1. From (20)(21),
- INT. J. PROD.RES.,2000, VOL.38, NO. 7, 1677 1687 CNC tool path planning for multi-patch sculptured surfaces
- 616 IEEE/ASME TRANSACTIONS ON MECHATRONICS, VOL. 14, NO. 5, OCTOBER 2009 Dual Servo Control of a High-Tilt 3-DOF
- Computer-Aided Design 39 (2007) 218228 www.elsevier.com/locate/cad
- Optimal design of a micro evaporator with lateral gaps Taijong Sung a
- A generic event control framework for modular exible manufacturing systems
- .... ACTUATORS E LSEVI ER SensorsandActuatorsA 71 (1998) 223-229 pHYSICAL.
- Asian Symposium for Precision Engineering and Nanotechnology 2007 1. Introduction
- Robotica (2005) volume 23, pp. 109122. 2005 Cambridge University Press DOI: 10.1017/S0263574704000402 Printed in the United Kingdom
- Hyunpyo Shin Graduate School of Mechanical and Aerospace
- Journal of Mechanical Science and Technology 23 (2009) 3088~3094 www.springerlink.com/content/1738-494x
- Jay il Jeong e-mail: jayjeong@rodel.snu.ac.kr
- Hybrid rapid prototyping system using machining and deposition Junghoon Hura
- IEEE TRANSACTIONS ON ROBOTICS AND AUTOMATION, VOL. 17, NO. 4, AUGUST 2001 423 Design and Analysis of a Redundantly Actuated
- Control Engineering Practice 8 (2000) 949}958 Controller gain tuning of a simultaneous multi-axis
- http://journals.cambridge.org Downloaded: 09 Dec 2010 IP address: 147.46.112.231 Robotica: page 1 of 8. Cambridge University Press 2010
- Journal of Mechanical Science and Technology 22 (2008) 1490~1498 www.springerlink.com/content/1738-494x
- Journal of Mechanical Science and Technology 22 (2008) 746~754 www.springerlink.com/content/1738-494x
- Excavator tele-operation system using a human arm Dongmok Kim a
- INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING Vol. 10, No. 4, pp. 00-00 OCTOBER 2009 / 5 DOI XXX-XXX-XXXX
- Jinwook Kim Changbeom Park
- 1544 Journalof MechanicalScience and Technology (KSME Int. J.), VoL 19, No. 8, pp. 1544~ 1553, 2005 Design and Fabrication of a Micro PZT Cantilever Array Actuator
- Int. J. Mach. Tools Manufact. Vol. 36. No. 8. pp. 925-937. 1996 C~yriglN 1996 Elsevier Science lad
- A Micro-positioning Parallel Mechanism Platform with 100-degree Tilting Capability
- Robotica (2004) volume 22, pp. 599609. 2004 Cambridge University Press DOI: 10.1017/S0263574704000396 Printed in the United Kingdom
- Int J Adv Manuf Technol (1997) 13:523-529 I997 Springer-Verlag London Limited
- Eclipse-RP: a new RP machine based on repeated deposition and machining
- Robotics and Autonomous Systems 58 (2010) 648656 Contents lists available at ScienceDirect
- A calibration method of redundantly actuated parallel mechanism machines based on projection technique
- Sensors and Actuators A 121 (2005) 162171 A slim type microvalve driven by PZT films
- INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING Vol. 11, No. 4, pp. 519-526 AUGUST 2010 / 519 DOI: 10.1007/s12541-010-0060-x
- Asian Symposium for Precision Engineering and Nanotechnology 2007 Stiffness enhancement of a redundantly
- International Journal of Machine Tools & Manufacture 39 (1999) 17171731 Indirect cutting force measurement in multi-axis
- A three translational DoFs parallel cube-manipulator Xin-Jun Liu*, Jay il Jeong, and Jongwon Kim
- Journal of Mechanical Science and Technology 23 (2009) 3088~3094 www.springerlink.com/content/1738-494x
- Corresponding author: TaeWon Seo E-mail: taewon.seo1@gmail.com
- Robotica (2009) volume 27, pp. 241247. 2008 Cambridge University Press doi:10.1017/S0263574708004633 Printed in the United Kingdom
- Development of a mobile robotic system for working in the double-hulled structure of a ship$
- Advanced Robotics 25 (2011) 699715 brill.nl/ar
- ORIGINAL ARTICLE Development of a mobile welding robot for double-hull structures
- Self-traveling robotic system for autonomous abrasive blast cleaning in double-hulled structures of ships
- This article appeared in a journal published by Elsevier. The attached copy is furnished to the author for internal non-commercial research
- Development and application of an intelligent welding robot system for shipbuilding
- Optimal design of a micro-orifice for constant evaporator superheat in a small cooler
- Chicken Chicken Chicken: Chicken Chicken Doug Zongker
