- Materials Science and Engineering A252 (1998) 117132 Optimization of 316 stainless steel/alumina functionally graded
- Model-based control strategies in the dynamic interaction of air supply and fuel cell
- Design, Optimization andDesign, Optimization and Statistical Sensitivity Analysis of theStatistical Sensitivity Analysis of the
- UNCORRECTEDPROOF Please cite this article in press as: M. Grujicic, et al., Mater. Sci. Eng. A (2008), doi:10.1016/j.msea.2008.07.056
- OPTICAL PROPERTIES OFOPTICAL PROPERTIES OF METALLIC NANOPARTICLES,METALLIC NANOPARTICLES,
- Particle/substrate interaction in the cold-spray bonding process
- Multi-length Scale Modeling of CVD of Diamond Films
- A meso-scale unit-cell based material model for the single-ply flexible-fabric armor M. Grujicic a,*, W.C. Bell a
- UNCORRECTEDPROOF Please cite this article in press as: M. Grujicic et al., Selection of the spraying technologies for over-coating of metal-stampings
- The effect of topological defects and oxygen adsorption on the electronic transport properties of
- Materials and Design 23 (2002) 657666 0261-3069/02/$ -see front matter 2002 Elsevier Science Ltd. All rights reserved.
- The effect of a carbon-nanotube forest-mat strike face on the ballistic-protection performance of E-glass
- Materials Chemistry and Physics 86 (2004) 358369 Effect of shear, compaction and nesting on permeability of the orthogonal
- Computational analysis of the interfacial bonding between feed-powder particles and the substrate in the cold-gas
- A computational analysis of the ballistic performance of light-weight hybrid composite armors
- JOURNAL OF MATERIALS SCIENCE 32 (1997) 4865 --4874 Transformation toughening in the -TiAl -TiV
- JOURNAL OF MATERIALS SCIENCE 35 (2000) 4635 4647 Crystal plasticity analysis of stressassisted
- Chemical Engineering Science 59 (2004) 58835895 www.elsevier.com/locate/ces
- Multidiscipline Modeling in Mat. and Str.4(2008)XX -XX www.brill.nl/mmms CKoninklijke Brill NV, Leiden, 2007
- Atomistic modeling of solubilization of carbon nanotubes by non-covalent functionalization with poly(p-phenylenevinylene-
- JOURNAL OF MATERIALS SCIENCE 39 (2004) 2315 2325 Atomistic simulations of the solubilization
- UNCORRECTED 2 Multi-scale ballistic material modeling of cross-plied compliant composites
- Multidiscipline Modeling in Mat. and Str.4(2008)XX -XX www.brill.nl/mmms C Koninklijke Brill NV, Leiden, 2008
- Journal of Materials Synthesis and Processing, Vol. 9, No. 6, November 2001 ( 2002) 1064-7562/01/1100-0329/0 2002 Plenum Publishing Corporation
- Heat transfer and effective thermal conductivity analyses in carbon-based foams for use in thermal
- JOURNAL OF MATERIALS SCIENCE 35 (2000) 5371 5381 Multi-length scale modeling of CVD of diamond
- Optimization of Blank Shape to Minimize Earing in Fully-Drawn
- International Journal of Fracture 83: 337358, 1997. c 1997 Kluwer Academic Publishers. Printed in the Netherlands.
- Optimization of the chemical vapor deposition process for carbon nanotubes fabrication
- Multidiscipline Modeling in Mat. and Str., Vol. XX, No. XX, pp. 1-26(XXXX) BRILL XXXX.
- Modeling and Simulations ofModeling and Simulations of Processing/Structure/Property RelationshipsProcessing/Structure/Property Relationships
- Multi-length Scale Modeling of Titanium Nitride Coatings
- Computational Modeling of theComputational Modeling of the Vacuum Assisted Resin Transfer MoldingVacuum Assisted Resin Transfer Molding
- MS Thesis Defense A Combined Discrete-dislocation/Scale-
- Development, parameterization, and validation of a visco-plastic material model for sand with different
- UNCORRECTED 2 Derivation, Parameterization and Validation
- UNCORRECTED 2 Development and verification of a meso-scale based dynamic
- This article appeared in a journal published by Elsevier. The attached copy is furnished to the author for internal non-commercial research
- Multidiscipline Modeling in Mat. and Str.4(2008)XX -XX www.brill.nl/mmms C Koninklijke Brill NV, Leiden, 2008
- UNCORRECTEDPROOF Please cite this article in press as: M. Grujicic et al., An overview of the polymer-to-metal direct-adhesion hybrid technologies for load-bearing
- This article was published in an Elsevier journal. The attached copy is furnished to the author for non-commercial research and
- Galley Proof 26/01/2007; 10:02 File: sav392.tex; BOKCTP/ljl p. 1 Shock and Vibration 14 (2007) 121 1
- 3 Micro-mechanics based derivation of the materials constitutive 4 relations for carbon-nanotube reinforced poly-vinyl-ester-epoxy
- Impulse loading resulting from shallow buried explosives in water-saturated sand
- Hypervelocity impact resistance of reinforced carboncarbon/ carbonfoam thermal protection systems
- [RD1: JMS] SJNW567-14-1414 December 21, 2005 23:25 JOURNAL OF MATERIALS SCIENCE
- Suitability of boron-nitride single-walled nanotubes as fluid-flow conduits in nano-valve applications
- The effect of thermal contact resistance on heat management in the electronic packaging
- Computational analysis of the thermal conductivity of the carboncarbon composite materials
- Materials Science and Engineering B 117 (2005) 5361 Finite element analysis-based design of a fluid-flow control nano-valve
- Optimization of a piezoelectric bimorph grasper for use in minimally invasive surgical applications
- Materials Science and Engineering B 117 (2005) 187197 An atomic level analysis of conductivity and strength
- Concentration efficiency of doping in phosphors: Investigation of the copper-and aluminum-doped zinc sulfide
- 9 Abstract Changes in the permeability tensor of fabric 10 preforms caused by various modes of fabric distortion
- Control of the transient behaviour of polymer electrolyte membrane fuel cell systems
- Materials Science and Engineering B 108 (2004) 241252 Cathode and interdigitated air distributor geometry optimization
- Non-isothermal preform infiltration during the vacuum-assisted resin transfer molding (VARTM) process
- Flow analysis and nozzle-shape optimization for the cold-gas dynamic-spray process
- UV-light enhanced oxidation of carbon nanotubes M. Grujicica,*
- Feb 25, 2003 Dear Prof. Grujicic
- Materials Science and Engineering B107 (2004) 204216 Atomic-scale computations of the lattice contribution to thermal
- Materials and Design 24 (2003) 6978 0261-3069/03/$ -see front matter 2002 Elsevier Science Ltd. All rights reserved.
- UNCORRECTED Reliability analysis of hybrid ceramic/steel gun barrels
- A PROBABILISTIC FINITE ELEMENT ANALYSIS OF RESIDUAL STRESS FORMATION
- JOURNAL OF MATERIALS SCIENCE 38 (2003) 307 322 Crystal plasticity-based finite element analysis
- K LUWER ACADEMIC /PLENUM PUBLISHERS F New York Boston Dordrecht London Moscow
- EFFECTIVE MATERIALS PROPERTIES: DETERMINATION AND APPLICATION IN MECHANICAL DESIGN AND OPTIMIZATION
- /typeset2:/sco3/jobs1/ELSEVIER/msa/week.17/Pmsa15088y.001 Wed May 16 07:53:37 2001 Page Wed Materials Science and Engineering A000 (2001) 000000
- JOURNAL OF MATERIALS SCIENCE 36 (2001) 2851 2863 A crystal plasticity materials constitutive model
- JOURNAL OF MATERIALS SCIENCE 36 (2001) 2937 2953 Multi-length scale modeling of chemical vapor
- STRAIN AGING OF AUSTENITIC HADFIELD MANGANESE STEEL
- JOURNAL OF MATERIALS SCIENCE 34 (1999) 1419 1437 Combined atomisticcrystal plasticity analysis
- JOURNAL OF MATERIALS SCIENCE 34 (1999) 7 20 Atomistic simulation of chemical vapor
- INTERFACE SCIENCE 6, 155164 (1998) c 1998 Kluwer Academic Publishers. Manufactured in The Netherlands.
- Journal of Computer-Aided Materials Design, 4 (1997) 183192. 183 Article based on an Invited Poster presented at the workshop Multiscale Materials Prediction: Fundamentals and Industrial
- JOURNAL OF MATERIALS SCIENCE 32 (1997) 4875 --4887 Transformation toughening in the -TiAl -TiV
- Modelling Simul. Mater. Sci. Eng. 4 (1996) 123136. Printed in the UK An atomistic simulation study of the effect of crystal defects
- JOURNAL OF MATERIALS SCIENCE 35 (2000) 5359 5369 Multi-length scale modeling of CVD of diamond
- UNCORRECTED 2 The Potential of a Clinch-Lock Polymer Metal Hybrid
- Modelling Simul. Mater. Sci. Eng. 3 (1995) 811-828. Printed in the UK Atomistic simulation of transformation toughening in
- Ballistic-Performance Optimization of A Hybrid Carbon-Nanotube/E-Glass Reinforced
- Multidiscipline Modeling in Mat. and Str., Vol. XX, No. XX, pp. 1-26(XXXX) BRILL XXXX.
- A numerical investigation of the influence of yarn-level finite-element model on energy absorption by a
- Multilevel Scale Computational SimulationMultilevel Scale Computational Simulation of the Processing/Properties/Performanceof the Processing/Properties/Performance
- Enhancement of eld emission in carbon nanotubes through adsorption of polar molecules
- Mica Grujicic Department of Mechanical Engineering,
- UNCORRECTEDPROOF PROTEC 12115 114
- UNCORRECTEDPROOF PROTEC 11307 118
- A computational analysis of the carbon-nanotube-based resonant-circuit sensors
- A TRIBUTE TO PROFESSOR WALTER SHEPHERD OWEN ONE OF THE PIONEERS IN
- UNCORRECTEDPROOF Please cite this article in press as: M. Grujicic et al., Computational feasibility analysis of direct-adhesion polymer-to-metal hybrid technology
- JOURNAL OF MATERIALS SCIENCE 37 (2002) 753 764 Crystal plasticity analysis of earing in deep-drawn
- Adiabatic shear instability based mechanism for particles/substrate bonding in the cold-gas dynamic-spray process
- JOURNAL OF MATERIALS SCIENCES 33 (1998) 4401--4415 Effect of martensitic transformation in Ti15 at % V
- An atomic-scale analysis of catalytically-assisted chemical vapor deposition of carbon nanotubes
- JOURNAL OF MATERIALS SCIENCE 33 (1998) 4389 4400 Effect of martensitic transformation in Ti15 at%
- Computer Modeling of the Evolution of Dendrite Microstructure in Binary Alloys During
- A COMPUTATIONAL ANALYSIS AND SUITABILITY ASSESSMENT OF COLD-GAS DYNAMIC SPRAYING OF GLASS-FIBER REINFORCED POLY-AMIDE 6
- Materials Science and Engineering A265 (1999) 285300 Crystal plasticity analysis of the effect of dispersed i-phase on
- Design and optimization of polymer electrolyte membrane (PEM) fuel cells
- Multidiscipline Modeling in Mat. and Str., Vol. 3, No. 4, pp. 431-460(2007) BRILL 2007.
- Multidiscipline Modeling in Mat. and Str., Vol. XX, No. XX, pp. 1-30(XXXX) BRILL XXXX.
- A comparison of mode I fracture behavior of fcc and bcc metallic materials: a discrete dislocation analysis
- COMPUTATIONAL MODELING OF THE VACUUM ASSISTED RESIN TRANSFER MOLDING (VARTM) PROCESS
- Multidiscipline Modeling in Mat. and Str.4(2008)XX -XX www.brill.nl/mmms C Koninklijke Brill NV, Leiden, 2008
- Multidiscipline Modeling in Mat. and Str., Vol. XX, No. XX, pp. 1-28(XXXX) BRILL XXXX.
- FEM Analysis ofFEM Analysis of Deformation and Fracture ofDeformation and Fracture of
- Computer simulations of the evolution of solidication microstructure in the LENSTM
- Soil Dynamics and Earthquake Engineering ] (]]]]) ]]]]]] Computer-simulations based development of a high strain-rate, large-
- Journal of Materials Synthesis and Processing, Vol. 8, No. 2, 2000 1064-7562/00/0300-0073$18.00/0 2000 Plenum Publishing Corporation
- JOURNAL OF MATERIALS SCIENCE 36 (2001) 2179 2188 A comparative discrete-dislocation/
- ORRECTEDPROOF Please cite this article in press as: M. Grujicic, et al., Mater. Sci. Eng. A (2008), doi:10.1016/j.msea.2008.02.020
- UNCORRECTEDPROOF APSUSC 14456 113
- Materials Science and Engineering A251 (1998) 6476 Determination of effective elastic properties of functionally graded
- UNCORRECTEDPROOF Please cite this article in press as: M. Grujicic et al., Mater. Sci. Eng. A (2007), doi:10.1016/j.msea.2007.06.013
- Department of Mechanical EngineeringDepartment of Mechanical Engineering Dr. M. GrujicicDr. M. Grujicic
- Materials Science and Engineering A368 (2004) 222230 Analysis of the impact velocity of powder particles in the
- Structural Analysis of LargeStructural Analysis of Large Caliber Hybrid Ceramic/SteelCaliber Hybrid Ceramic/Steel
- JOURNAL OF MATERIALS SCIENCE 40 (2005) 1943 1952 Computational analysis of the lattice contribution
- UNCORRECTED 2 Total Life Cycle-Based Materials Selection for Polymer
- A COMPUTATIONAL INVESTIGATION OF IMPACT INTO MULTI-PLIES OF PLAIN-WOVEN FABRIC
- JOURNAL OF MATERIALS SCIENCE 40 (2005) 5181 5190 A statistical analysis of the mechanical and
- UNCORRECTED 2 An Improved Mechanical Material Model for Ballistic
