
- Comprehensive modeling of ELMs and their effect on plasma-facing surfaces during normal tokamak operation q
- Effects of plasma spatial profile on conversion efficiency of laser-produced plasma
- INSTITUTE OF PHYSICS PUBLISHING JOURNAL OF PHYSICS D: APPLIED PHYSICS J. Phys. D: Appl. Phys. 39 (2006) 484487 doi:10.1088/0022-3727/39/3/010
- Accepted Manuscript Integrated models to study the impact of ELMs and disruptions on lithium in
- 474 IEEE TRANSACTIONS ON PLASMA SCIENCE, VOL. 33, NO. 2, APRIL 2005 Fast Photography of a Laser Generated Plasma
- Extreme-ultraviolet spectral purity and magnetic ion debris mitigation by use of low-density
- INSTITUTE OF PHYSICS PUBLISHING NANOTECHNOLOGY Nanotechnology 15 (2004) 390403 PII: S0957-4484(04)68788-5
- Chamber wall response to target implosion in inertial fusion reactors: new and critical assessments,
- a._-__k!BEUEVIER Journal of Nuclear Materials 233-237 (1996) 713-717 Lifetime evaluation of plasma-facing materials during a tokamak
- IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 49 (2009) 104016 (14pp) doi:10.1088/0029-5515/49/10/104016
- U.S. ITER LIMITER MODULE DESIGN* R.F. Mattas, M. Billone, and A. Hassanein
- NUMERICAL SIMULATION OF LASER-PRODUCED PLASMA DEVICES FOR EUV LITHOGRAPHY USING
- Integrated simulation of plasma surface interaction during edge localized modes and disruptions: Self-consistent approach
- Expansion dynamics of laser ablated carbon plasma plume in helium ambient
- Tritium Behavior in Eroded Dust and Debris of Plasma-Facing Materials*
- 3550 GENERAL ATOMICS COURT, SAN DIEGO, CA 92121-1122 P.O. BOX 85608, SAN DIEGO, CA 92186-5608 (858) 455-3000 May 10, 2010
- MODELING AND MECHANISMS OF MACROSCOPIC EROSION OF MELT LAYERS OF PLASMA FACING COMPONENTS IN FUSION REACTORS
- (7 ________final radiation uI
- Modeling and optimization of debris mitigation systems for laser and discharge-produced
- J. Phys. D: Appl. Phys. 29 (1996) 10741079. Printed in the UK Measurement of the absolute
- Distribution Category: Magnetic Fusion Reactor Materials
- Internal structure and expansion dynamics of laser ablation plumes into ambient gases
- This report was prepared as an account ut work sponsored b^ an agency of [he I'ruled Slate (iovernmenl Neither the 1 nited Slates (iovcHiin.'nt nor any agency thercut, not any >l the
- Experimental studies of lithium-based surface chemistry for fusion plasma-facing materials applications q
- PossibleExplanationofTotalAblationofthe 1908TunguskaAsteroid*
- Design Windows for a He Cooled Fusion Reactor* Dai-Kai Sze and Ahmed Hassanein
- ORIGINAL PAPER Spatial and temporal variations of electron temperatures
- ELSEVIER Journal of NuclearMaterials241-243 (1997) 848-852 Exposure of CFC-materials to high transient heat loads in the
- Llllli0... i_,5.oII111_II111_ lllIl_II111_11111_
- \-%ooS\ i--1 INTOR FIRST WALL/BLANKET/SHIELD ACTIVITY CONF-860391 1
- Molecular dynamics simulation of Li surface erosion and bubble formation
- Spectroscopic characterization of laser-induced tin plasma S. S. Harilal,a
- HEIGHTS Initial Simulation of Discharge Produced Plasma Hydrodynamics and Radiation Transport for EUV Lithography
- IIII1'op 1.32 IIIIINIllllgIllllg
- * hassanein@purdue.edu; phone 1 765 496-9731; fax 1 765 496-2233 Effects of Plasma Spatial Profile on Conversion Efficiency of Laser
- Antiport Mechanism for Cl in ClC-ec1 from Normal-Mode Analysis
- ELSEVIER Journal of Nuclear Materials 212-215 (1994) 1272-1277 Beryllium and graphite performance in ITER
- SPECTROCHIMICA E LS EV I E R Spectrochimica Acta Part B 52 (I 997) 657 666
- Shape-dependent global deformation modes of large protein structures Gennady V. Miloshevsky a,*, Ahmed Hassanein a
- EMISSION CHARACTERISTICS OF ND:YAG AND CO2 LASER-PRODUCED TIN PLASMAS FOR EXTREME ULTRAVIOLET LITHOGRAPHY SOURCE
- Spatial and temporal evolution of argon sparks Sivanandan S. Harilal
- INSTITUTE OF PHYSICS PUBLISHING JOURNAL OF PHYSICS D: APPLIED PHYSICS J. Phys. D: Appl. Phys. 40 (2007) 447452 doi:10.1088/0022-3727/40/2/021
- NUCLEAR MODULES OF ITER TOKAMAK SYSTEMS CODE* ain CONF-871007--68
- Nanosecond spectroscopy of expanding laser-produced tin B. O'Shay, F. Najmabadi, S. S. Harilal and M. S. Tillack
- LOW TECHNOLOGY HIGH TRITIUM BREEDING BLANKET CONCEPT* Y. Gohar, C. C. Baker, D. L. Smith, M. C. Billone, Y. S. Cha,
- Effect of focal spot size on in-band 13.5 nm extreme ultraviolet emission from laser-produced
- BNL -(j8736 cA!?-326-NuFact-OIC
- Journal of Nuclear Materials 207 (1993) 116-122 North-Holland
- Damage to nearby divertor components of ITER-like devices during giant ELMs and disruptions
- IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 49 (2009) 095003 (9pp) doi:10.1088/0029-5515/49/9/095003
- Fusion Engineering and Design 3940 (1998) 287294 Response of plasma-facing materials to high transient heat
- Heat and particle uxes from collisionless scrape-o-layer during tokamak plasma disruptions
- _ _4 HnNUFnCTURED TO nIIH STRNORROS _I_ _.._ ' BY _PPLIED IHRGE, INC. _.._ _@_'_
- High heat ux erosion of carbon bre composite materials in the TEXTOR tokamak
- Time resolved Nomarski interferometery of laser produced plasma plumes P. Hough a,
- RECEIVED BY OSTI APR 2 Paper presented at the
- Influence of ambient gas on the temperature and density of laser produced carbon plasma
- CONF-880505--17 DE88 011237
- CONF-901007--48 Pi! ' " DR91 006 500
- IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 48 (2008) 115008 (11pp) doi:10.1088/0029-5515/48/11/115008
- Paper presented at 10th Symposium on Fusion Engineering, Phiiadelphia, Pennsylvania, December 5~9> 1983; also for COf
- DiMES Contributions to PMI Understanding C.P.C.Wong, D, G.Whyte,b R. Bastasz,c W. Wamplerc J. N. Brooks,e T.E. Evans,a W.P. West,a
- Electron density and temperature measurements in a laser produced carbon plasma
- IOP PUBLISHING JOURNAL OF PHYSICS D: APPLIED PHYSICS J. Phys. D: Appl. Phys. 42 (2009) 055211 (6pp) doi:10.1088/0022-3727/42/5/055211
- New critical assessments of chamber and wall response to target implosion in inertial fusion reactors
- ANUFPP/TM-296 PHYSICS OF COLLISIONLESS SCRAPE-OFF-LAYER
- Ambient gas effects on the dynamics of laser-produced tin plume expansion
- Analysis, simulation, and experimental studies of YAG and CO2 laser-produced plasma for EUV lithography sources
- Electroelastic coupling between membrane surface fluctuations and membrane-embedded charges: Continuum multidielectric treatment
- Temporal and spatial evolution of laser ablated plasma from YBa,Ch.& S. S. Harilal, P. Radhakrishnan, V. P. N. Nampoori, and C. P. G. Vallabhan
- Appl. Phys. B 70, 429434 (2000) / Digital Object Identifier (DOI) 10.1007/s003400000196 Applied Physics B
- Emission characteristics and dynamics of the stagnation layer in colliding laser produced plasmas
- Confinement and dynamics of laser-produced plasma expanding across a transverse magnetic field S. S. Harilal, M. S. Tillack, B. O'Shay, C. V. Bindhu, and F. Najmabadi
- ANL-HEP-CP-99-29 TI-IEDESIGN OFA LIQUID LITHIUM LENS
- fwL/--t+Q-9N3$? ALPS -Advanced Limiter-divertor Plasma-facing Systems*
- PossibleApplications of PowerfulPulsed C0,-Lasers in Tokamak Reactors
- Influence of Solar-ProbeInherent Atmosphereon In-Situ Observations
- Comprehensive Physical Models and Simulation Package for Plasma/Material Interactions during Plasma Instabilities"
- Materials Effects and Design Implications of Disruptions and Off-NormalEvents in ITER
- Tritium Containment in the Dust and Debris of Plasma-Facing Materials Produced During Operations
- DistributionCategory: Magnetic Fusion Reactor Materials
- ANALYSIS OF THE TRITIUM-WATER (T-H20) SYSTEM FOR A FUSION MATERIAL TEST FACILITY
- ANL/CP--74880 DE92 016183
- cERTAINDATA CONTAINEDIN THIS
- CERTAIN DATA . CONTAINEDINTHIS
- CONF-881031--66 DE89 007397
- Paper submitted to the Winter ASME Meeting, Nov. 27-Dec. 2, 1988, Chicago, IL. CONF-881120 --1 2
- To be presented at the Eighth Topical Meeting on Technology of Fusion Energy, Salt Lake City, UT,October 9-13, 1988.
- LEGIBILITY NOTICE A major purpose of the
- ThisreportwaspreparedananaccountofworksponsoredbyiinagencyoftheUnited.Stales Government.Neither(heUnitedSlatesGovernmentnoranyagencythereof,nor.inyoftheir
- ENGINEERING DESIGN OF A LIQUID METAL COOLED SELF-PUMPED LIMITER FOR A TOKAMAK REACTOR*
- AUG 1 91986 Rpppivfirt bvOSTl
- Ei^n BY OJ/VI 1 9 1985 ELASTIC AND INELASTIC SURFACE EFFECTS ON ION PENETRATION AND THE RESULTING
- ThiireportwupreparedaianaccountofworksponsoredbyanagencyoftheUnitedStitet Government.NeithertheUnitedStatecGovernmentfloranyagencythereof,noranyoftheir
- ThisreportwaspreparedasanaccountofworksponsoredbyanagencyoftheUnitedStates Government.NeithertheUnitedStalesGovernmentnoranyagencythereof,noranyoftheir
- Distribution Category: Magnetic Fusion Energy
- CALCULATION OF THE INFLUENCE OF THE INJECTION RATE OF CARRIERS
- I. E. TRALLEand V. A. SIZ.IUK:Beam Instability and Wave Amplification 85 phys. stat. sol. (b) 196,85 (1996)
- ARGONNE NATIONAL LABORATORY 9700 South Cass Avenue, Argonne Illinois 60439
- Author's personal copy Fusion Engineering and Design 85 (2010) 687693
- Volume 58, Number 6, 2004 APPLIED SPECTROSCOPY 719 0003-7028 / 04 / 5806-719$2.00 / 0
- ee ,_ 0__/_ MRNUFRCTUREDByRPPLIEDTOI_MIIGM,STI_NNc_RRDS __'_" Plasma Disruption Modeling and Simulation*
- Integrated Models for PlasmalMaterial Interaction . during Loss of Plasma Confhernent
- Abstract of paper to be presented at the ANR 1984 Annual Meeting. New Louisiana, June ?-8, 1984.
- High Heat Flux Interactions and Tritium Removal from Plasma Facing Components by a Scanning Laser'
- DYNAMICS OF LIQUID METAL JETS PENETRATING A STRONG MAGNETIC FIELD IN HIGH-POWER COLLIDERS
- PRAMANA 9 Indian Academy of Sciences Vol. 52, No. 4 --journal of April 1999
- A. M. Hassanein Argonne National Laboratory,
- wov 2 1 1995 DESIGNAND ANALYSIS OF THE LITHIUMTA&&&&EM FOR THE
- Combined effects of pre-pulsing and target geometry on efficient EUV production from laser produced plasma experiments and modeling
- Dynamics of C2 formation in laser-produced carbon plasma in helium environment
- Analysis of atomic and ion debris features of laser-produced Sn and Li plasmas
- Efficient laser-produced plasma extreme ultraviolet sources using grooved Sn targets
- Angular distribution of debris from CO2 and YAG laser-produced tin plasmas
- Influence of spot size on extreme ultraviolet efficiency of laser-produced S. S. Harilal,1,a
- Author's personal copy Reactivity of lithium exposed graphite surface
- Pulse shaping of transversely excited atmospheric CO2 laser using a simple plasma shutter
- Debris and Radiation-Induced Damage Effects on EUV Nanolithography Source Collector Mirror Optics Performance
- Debris mitigation in a laser-produced tin plume using a magnetic field S. S. Harilal,a
- Laser propagation and energy absorption by an argon spark C. V. Bindhu, S. S. Harilal,a)
- INSTITUTE OF PHYSICS PUBLISHING JOURNAL OF PHYSICS B: ATOMIC, MOLECULAR AND OPTICAL PHYSICS J. Phys. B: At. Mol. Opt. Phys. 34 (2001) 37173726 PII: S0953-4075(01)25041-X
- Charge-exchange collisions in interpenetrating laser-produced magnesium plasmas
- Time evolution of colliding laser produced magnesium plasmas investigated using a pinhole camera
- INSTITUTE OF PHYSICS PUBLISHING JOURNAL OF PHYSICS D: APPLIED PHYSICS J. Phys. D: Appl. Phys. 34 (2001) 560566 www.iop.org/Journals/jd PII: S0022-3727(01)16772-0
- Appl. Phys. B 66, 633638 (1998) Applied Physics B
- surface science ELSEVIER Applied Surface Science 125 (1998) 227-235
- Volume 52, Number 3, 1998 APPLIED SPECTROSCOPY 4490003-7028 / 98 / 5203-0449$2.00 / 0 q 1998 Society for Applied Spectroscopy
- Thermal diffusivity measurements in organic liquids using transient thermal lens calorimetry
- Appl. Phys. A 67, 557561 (1998) Applied Physics A
- Plasma Sources Sci. Technol. 6 (1997) 317322. Printed in the UK PII: S0963-0252(97)83960-6 Spatial analysis of C2 band emission
- Emission characteristics and dynamics of C2 from laser produced graphite plasma
- ELSEVIER Spectrochimica Acta Part A 53 (1997)1527-1536 SPECTROCHIMICA
- PRAMANA Printed in India Vol. 44, No. 3, __ journalof March 1995
- This article appeared in a journal published by Elsevier. The attached copy is furnished to the author for internal non-commercial research
- 2 Dynamic analysis of mixed ion beams/materials effects on the performance 3 of ITER-like devices
- Fusion Engineering and Design 85 (2010) 13311335 Contents lists available at ScienceDirect
- Fusion Engineering and Design 83 (2008) 10201024 Contents lists available at ScienceDirect
- EUV Radiation of Xenon Plasma Streams Generated by Magnetoplasma I.E. Garkusha1
- Multidimensional Simulation and Optimization of Hybrid Laser and Discharge Plasma Devices for EUV Lithography
- Hollow laser self-confined plasma for extreme ultraviolet lithography and other applications
- PLASMA DYNAMICS AND PLASMA WALL INTERACTION 130 Problems of Atomic Science and Technology. 2006, 6. Series: Plasma Physics (12), p. 130-134
- CONCAVE LIQUID METAL DIVERTOR FOR SPHERICAL TOKAMAKS
- Three-dimensional simulation of laser-produced plasma for extreme ultraviolet lithography applications
- Application of finite-difference methods to membrane-mediated protein interactions and to heat
- Modeling and analysis of mixed-material surface evolution and sputtering
- MHD problems in free liquid surfaces as plasma-facing materials in magnetically confined reactors
- Study of brittle destruction and erosion mechanisms of carbon-based materials during plasma instabilities
- Hydrodynamic eects of eroded materials of plasma-facing component during a Tokamak disruption
- Performance and lifetime assessment of reactor wall and nearby components during plasma instabilities
- Fusion Engineering and Design 3940 (1998) 201210 Materials effects and design implications of disruptions and
- ELSEVIER Journal of Nuclear Materials 241-243 (1997) 288-293 Modeling and simulation of melt-layer erosion during a plasma
- materialsELSEVIER Journal of Nuclear Materials 233-237 (1996) 1547-1551 Deuteron beam interaction with lithium jet in a neutron source test
- ELSEVIER Journal of Nuclear Materials 212-215 (1994)1671-1677 Analysis of beam-on-target interaction in a neutron-source
- Journal of Nuclear Materials 191-194 (1992) 499-502 North-Holland
- Journal of Nuclear Materials 141-143 (1986) 221-225 North-Holland, Amsterdam
- Journal of Nuclear Materials 122 & 123 (1984) 1453-1458 North-Holland, Amsterdam
- 400 Journal of Nuclear Materials 128& 129(1984) 400-406 DESIGN AND ANALYSIS OF A LOW-EDGE-TEMPERATURE DIVERTOR FOR INTOR *
- 554 Journal of Nuclear Materials II I & 112 (1982) 554-559 North-Holland Publishing Company
- LLNL-CONF-409744 An Experiment to Tame the
- AN ADJUSTABLE THICKNESS Li/Be TARGET FOR FRAGMENTATION OF 3-kW HEAVY ION BEAMS
- Chamber Wall Response to Target Implosion in Inertial Fusion Reactors: New and Critical Assessments
- A LASER STRAIN GAUGE FOR ACCELERATOR TARGETS A. Hassanein, J. Norem, ANL, Argonne, IL 60439
- ARGONNE NATIONAL LABORATORY 9700 South Cass Avenue, Argonne, Illinois 60439
- BNL -66968 CAP-265-Muon-99C
- A New High-Speed X-ray Beam Chopper* Armon McPherson, Jin Wang, Peter L. Lee, and Dennis M. Mills
- THE INTERACTIONS OF SURFACE DAMAGE AND RF CAVITY OPERATION
- Investigation of the interaction of a laser pulse with a preformed Gaussian Sn plume for an extreme ultraviolet lithography source
- Argonne National Laboratory, a U.S. Department of Energy Office of Science Laboratory, is operated by The University of Chicago under contract W-31-109-Eng-38.
- Heights Integrated Model as Instrument for Simulation of Hydrodynamic, Radiation
- DEUTERONBEAMINTERACTIONWITH Li JET FOR A NEUTRONSOURCE TEST FACILITY*
- DOI: 10.1007/s00340-006-2532-3 Appl. Phys. B 86, 547553 (2007)
- IOP PUBLISHING and INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR FUSION Nucl. Fusion 49 (2009) 035007 (6pp) doi:10.1088/0029-5515/49/3/035007
- 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 mm Inches IIII!,.0,+,+
- IllllIILIIIIII!11m DistributionCategory
- BY I:IPPLTED "rHI:I_E, rNC, " Revised
- Nuclear Engineering and Design/Fusion 2 (1985) 305-318 305 North-Holland, Amsterdam
- INSTITUTE OF PHYSICS PUBLISHING JOURNAL OF PHYSICS D: APPLIED PHYSICS J. Phys. D: Appl. Phys. 39 (2006) 40274030 doi:10.1088/0022-3727/39/18/014
- Journal of Nuclear Materials 122 & 123 (1984) 1459-1465 North-Holland. Amsterdam
- Performance and Lifetime Assessment of Reactor Wall and Nearby Components during Plasma Instabilities*
- Tritium behavior in eroded dust and debris of plasma-facing A. Hassanein a,*, B. Wiechers b
- Comprehensive physical models and simulation package for plasma/material interactions during plasma instabilities 1
- Study of Material DestrultioYDuringPowerful Plasma A. Hassanein
- Laser wavelength effects on ionic and atomic emission from tin plasmas D. Campos,a
- September 10, 1999 16:43 WSPC/147-MPLB 0178 Modern Physics Letters B, Vol. 13, No. 16 (1999) 563576
- Proceedings ol'tlie 1999 Particle Accelerator Conl'erencc,New York, 1999 THE DESIGN OF A IJQUID LITHIUM LENS
- COMPI,,PTATIONALMODEL OF SURFACE ABLATION FROM TOKAMAK DISRUPTIONS
- J. Phys. D: Appl. Phys. 32 (1999) 407411. Printed in the UK PII: S0022-3727(99)96803-1 Studies of nonlinear absorption and
- Disruption Simulation Experiments and Extrapolation to Reactor Conditions
- ELSEVIER Journal of Nuclear Materials 220-222 (1995)244-248 Comprehensive model for disruption erosion
- Fusion Engineering and Design 84 (2009) 21582166 Contents lists available at ScienceDirect
- JUL 3 1 l%P Dvnamic Behavior of @&&!-Facing Materials during--a ---------
- Dynamic chamber armor behavior in IFE and MFE A.R. Raffray a,
- Journal of Nuclear Materials 103 Rr104 (1981) 327.332 North-Holland Publishing Company
- Erosion Damage of Nearby Plasma-Facing Components during a Disruption on the Divertor Plate*
- IMPACT: A facility to study the interaction of low-energy intense particle beams with dynamic heterogeneous surfaces
- EFFECT OF TIN BOMBARDMENT AND DEPOSITION ON COLLECTOR MIRROR
- UFETIME EVALUATIONOF PLASMA-FACING MATERIALSDURING A TOKAMAK DISRUPTION*
- Optical limiting and thermal lensing studies in C60 S. S. Harilal,a)
- Argonne National Laboratory is managed by The University of Chicago for the U.S.Department of Energy
- Journal of Nuclear Materials 103 & 104 (1981) 321-326 North-Holland Publishing Company
- INTEGRATED SIMULATION OF DISCHARGE AND LASER PRODUCED PLASMAS IN EUV LITHOGRAPHY DEVICES
- ANL/CP--7 2828 DE92 004147
- Macroscopic erosion of plasma facing and nearby components during plasma instabilities: the droplet shielding phenomenon
- HEIGHTS initial simulation of discharge produced plasma hydrodynamics and radiation
- Proceedings of the 200,l Particle AcceleratorConference,Chicago THERMOELASTIC RESPONSE OF SUDDENLY HEATED LIQUID
- The effect of excitation wavelength on dynamics of laser-produced S. S. Harilal,1
- Distribution Categories: Magnetic Fusion Energy (UC-20)
- Journal of Engineering Physics and Thermophysics, VoL 71, No..5, 1998 SIMULATION OF A GALLIUM ARSENIDE RUNNING
- Hydrodynamic Effects of Eroded Materials on Response of Plasma-Fachg Component during a Tokamak Disruption*
- Photoacoustic signal saturation and optical limiting in C70-toluene solution
- Comparison of EUV spectral and ion emission features from laser-produced Sn and Li plasmas
- ENHANCEMENT OF HEAT REMOVAL USING CONCAVE LIQUID METAL TARGETS FOR HIGH-POWER ACCELERATORS
- ARGONNE NATIONAL LABORATORY 9700 South Cass Avenue, Argonne Illinois 60439
- Optimization of EUV laser and discharge devices for high-volume manufacturing
- Journal of Nuclear Materials 196-198 (1992) 680-685 North-Holland
- Distribution Categories: Magnetic Fusion Energy (UC-20)
- Temporal and spatial evolution of C2 in laser induced plasma from graphite target
- INSTITUTE OF PHYSICS PUBLISHING JOURNAL OF PHYSICS D: APPLIED PHYSICS J. Phys. D: Appl. Phys. 34 (2001) 12131218 www.iop.org/Journals/jd PII: S0022-3727(01)19887-6
- Hydrogen and helium entrapment in flowing liquid metal plasma-facing surfaces
- ARGONNE NATIONAL LABORATORY 9700 South Cass Avenue, Argonne Illinois 60439
- lullIIlllIllLLLII DESIGN WINDOWS FOR A He COOLED FUSION REACTOR*
- J. Phys. D: Appl. Phys. 30 (1997) 17031709. Printed in the UK PII: S0022-3727(97)81246-6 Optical emission studies of C2
- Modeling of EUV Emission and Conversion Efficiency from Laser-Produced Tin Plasmas for Nanolithography
- Fusion Engineering and Design 4950 (2000) 127134 ALPSadvanced limiter-divertor plasma-facing systems
- Simulation and Optimization of DPP Hydrodynamics and Radiation Transport for EUV Lithography Devices
- Journal of Nuclear Materials 191-194 (1992) 503-507 NorthHolland
- CONF-850708--4 DE85 018393
- Vacuum 82 (2008) 872879 Surface erosion and modification by energetic ions
- Influence of spot size on propagation dynamics of laser-produced S. S. Harilala
- High Heat Flux Erosion of Carbon Fibre Composite Materials in the TEXTOR Tokamak*
- Mass-limited Sn target irradiated by dual laser pulses for an extreme ultraviolet lithography source
- The effect of laser wavelength on emission and particle dynamics of Sn plasma
- THERMOELASTIC RESPONSE OF SUDDENLY HEATED LIQUID TARGETS IN HIGH-POWER COLLIDERS
- 6PA40 6PA41 Sputtering ofW-Pd Bimetallic System under Nitrogen
- PRAMANA Printed in India Vol. 49, No. 3, --journal of September 1997
- 560 Journal of Nuclear Materials 11I & 112 (1982) 560-565 North-Holland Publishing Company
- Dynamic analysis and evolution of mixed materials bombarded with multiple T. Sizyuk *, A. Hassanein
- Appl. Phys. B 67, 647651 (1998) Applied Physics B
- TRITIUM RECYCLING AND INVENTORY IN ERODED DEBRIS OF PLASMA-FACING MATERIALS*
- This article has been accepted for inclusion in a future issue of this journal. Content is final as presented, with the exception of pagination. IEEE TRANSACTIONS ON PLASMA SCIENCE 1
- MODELING OF DAMAGE AND LIFETIME ANALYSIS OF PLASMA FACING COMPONENTS DURING PLASMA INSTABILITIES IN TOKAMAKS
- This article has been accepted for inclusion in a future issue of this journal. Content is final as presented, with the exception of pagination. IEEE TRANSACTIONS ON PLASMA SCIENCE 1
- Late-time particle emission from laser-produced graphite plasma S. S. Harilal,a)
- __ joumalof Printed in India Voi. 42, No. 3,
- PRAMANA Printed in India Vol.44, No. 3, __ journalof March 1995
- Combined effects of prepulsing and target geometry on efficient extreme ultraviolet
- Ion emission in collisions between two laser-produced plasmas This article has been downloaded from IOPscience. Please scroll down to see the full text article.
- Modeling hydrogen and helium entrapment in flowing liquid metal surfaces as plasma-facing components in
- Fusion Engineering and Design 5152 (2000) 681694 Theory and models of material erosion and lifetime during
- Fusion Engineering and Design 18(1991)135-144 135 North-Holland
- ELSEVIER Fusion Engineering and Design 28 (1995) 27 33 Engineering
- Fusion Engineering and Design 4950 (2000) 249253 Material response due to simulated plasma disruption loads
- Acta Technica 56 (2011), T113T122 c 2011 Institute of Thermomechanics AS CR, v.v.i. Features of plasma focus formation
- PRAMANA Printed in India Vol. 43, No. 5, journalof November 1994
- This article has been accepted for inclusion in a future issue of this journal. Content is final as presented, with the exception of pagination. IEEE TRANSACTIONS ON PLASMA SCIENCE 1
- Please cite this article in press as: J.N. Brooks, et al., Modeling of plasma/lithium-surface interactions in NSTX: Status and key issues. Fusion Eng. Des. (2011), doi:10.1016/j.fusengdes.2011.08.002
- Enhancements of extreme ultraviolet emission using prepulsed Sn laser-produced plasmas for advanced lithography applications
- Gas dynamic effects on formation of carbon dimers in laser-produced plasmas
- CARBON PLUME STAGNATION: PLATFORM FOR VAPOR SHIELD STUDY K.A. Tanaka, A. Hassanein1)
- Adsorption dynamics and angular dependency of contaminants on Ru mirror surfaces
- Excitation wavelength dependence of water-window line emissions from boron-nitride laser-produced plasmas
- Probing temporal evolution of extreme ultraviolet assisted contamination on Ru mirror by x-ray photoelectron spectroscopy
- Analysis of C-MOD molybdenum divertor erosion and code/data comparison q J.N. Brooks a,
- Two-dimensional mapping of the electron density in laser-produced plasmas