- The dynamic response of composite sandwich beams to transverse impact
- Journal of the Mechanics and Physics of Solids 52 (2004) 14811505
- European Journal of Mechanics A/Solids 28 (2009) 195201 Contents lists available at ScienceDirect
- Fabrication and structural performance of periodic cellular metal sandwich structures
- Int. J. Solids Srructures Vol. 34, No. 13, pp. 1645-1665, 1997 0 1997 Elsevier Science Ltd
- Acta mater. 49 (2001) 18591866 www.elsevier.com/locate/actamat
- A mathematical basis for strain-gradient plasticity theory. Part II: Tensorial plastic multiplier
- European Journal of Mechanics A/Solids 22 (2003) 801814 Finite element analysis of the dynamic response of clamped
- Materials Science and Engineering A 380 (2004) 272280 The out-of-plane compressive behavior of metallic honeycombs
- The selection of mechanical actuators based on performance indices
- International Journal of Mechanical Sciences 46 (2004) 585608 Collapse mechanisms of sandwich beams with composite faces
- Dynamic rupture of polymermetal bilayer plates G.J. McShane a
- Materials Science and Engineering A269 (1999) 3848 Compression fatigue of a cellular Al alloy
- Eect of imperfections on the yielding of two-dimensional foams
- International Journal of Mechanical Sciences 48 (2006) 799808 Plastic collapse of thin-walled frusta and egg-box material under shear
- An underwater shock simulator BY V. S. DESHPANDE, A. HEAVER AND N. A. FLECK*
- An evaluation of higher-order plasticity theories for predicting size effects and localisation
- International Journal of Mechanical Sciences 43 (2001) 487}504 E!ect of inclusions and holes on the sti!ness
- B. P. Russell V. S. Deshpande
- Influence of imperfections on the performance of metal foam core sandwich panels
- Journal of the Mechanics and Physics of Solids 55 (2007) 25382564
- Journal of the Mechanics and Physics of Solids 53 (2005) 23472383
- End compression of sandwich columns N.A. Fleck*, I. Sridhar
- International Journal of Fatigue 23 (2001) 499507 www.elsevier.com/locate/ijfatigue
- A. Srikantha Phani Department of Mechanical Engineering,
- Oliver A. Shergold Norman A. Fleck1
- Size effects in the torsion of thin metal wires Martin I Idiart1,2
- European Journal of Mechanics A/Solids 23 (2004) 411421 The out-of-plane compressive behaviour
- Sensors and Actuators A 132 (2006) 346353 Modelling and fabrication of low operation temperature microcages
- PLEASE SCROLL DOWN FOR ARTICLE This article was downloaded by: [Pane, I.]
- Acta mater. 49 (2001) 10351040 www.elsevier.com/locate/actamat
- Journal of the Mechanics and Physics of Solids 52 (2004) 18551888
- Journal of the Mechanics and Physics of Solids 49 (2001) 13611395
- In,. J. So/i& Struc~ure.~Vol 35, NO. 13, pp. 1363 1383, 199X :,`, 1998 Elsev1er Saence Ltd
- Effect of geometry upon the performance of a thin film ferroelectric capacitor
- Journal of the Mechanics and Physics of Solids 49 (2001) 231259
- Prediction of the dynamic response of composite sandwich beams under shock loading
- Dynamic crushing of sandwich panels with prismatic lattice cores
- FATIGUE FAILURE OF AN OPEN CELL AND A CLOSED CELL ALUMINIUM ALLOY FOAM
- Journal of the Mechanics and Physics of solids 53 (2005) 10151046
- Journal of the Mechanics and Physics of Solids 36 "0888# 674704
- The shearing behaviour of a sugar aggregate Catherine A. Davy a,*, M.D. Bolton b
- Compressive strength of composite laminates with terminated internal plies
- The topological design of multifunctional cellular metals
- The high strain rate response of PVC foams and end-grain balsa wood V.L. Tagarielli, V.S. Deshpande, N.A. Fleck *
- The role of geometrically necessary dislocations in giving material strengthening
- Microbuckle tunnelling in bre composites N.A. Fleck*, L.G. Zhao
- JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, VOL. 15, NO. 5, OCTOBER 2006 1039 A Systematic Approach to Process Selection in
- International Journal of Impact Engineering 32 (2006) 968987 The response of clamped sandwich beams subjected to
- Fatigue performance of sandwich beams with a pyramidal core F. Co^te, N.A. Fleck, V.S. Deshpande *
- Frictionless indentation of dissimilar elasticplastic spheres Sinisa Dj Mesarovic a
- Eur. J. Mech. A/Solids 19 (2000) 3150 2000 ditions scientifiques et mdicales Elsevier SAS. All rights reserved
- PERGAMON Journal of the Mechanics and Physics of Solids 36 "0888# 05520586
- Mechanics of Materials and Structures
- Performance of metallic honeycomb-core sandwich beams under shock loading
- Sensors and Actuators A 132 (2006) 139146 MEMS based digital variable capacitors with a high-k dielectric insulator
- In-plane properties of composite laminates with through-thickness pin reinforcement
- Modelling of fatigue crack tunneling and delamination in layered composites
- Journal of the Mechanics and Physics of Solids 36 "0888# 186213
- JOURNAL OF MATERIALS SCIENCE 40 (2005) 4005 4008 The multiaxial yield behaviour of an aluminium
- Cellular Metals and Polymers 2004, edited by R. F. Singer, C. Krner, V. Altstdt Fragezeichenverlag, Frth, Long ISBN number 8585858585
- Kagome plate structures for actuation R.G. Hutchinson a
- Journal of the Mechanics and Physics of Solids 49 (2001) 22452271
- PLEASE SCROLL DOWN FOR ARTICLE This article was downloaded by: [Cambridge University]
- The compressive and shear responses of corrugated and diamond lattice materials
- INSTITUTE OF PHYSICS PUBLISHING JOURNAL OF MICROMECHANICS AND MICROENGINEERING J. Micromech. Microeng. 15 (2005) 14061413 doi:10.1088/0960-1317/15/8/005
- INDENTATION RESISTANCE OF AN ALUMINIUM FOAM O.B. Olurin, N.A. Fleck
- INSTITUTE OF PHYSICS PUBLISHING JOURNAL OF MICROMECHANICS AND MICROENGINEERING J. Micromech. Microeng. 15 (2005) 12941302 doi:10.1088/0960-1317/15/6/022
- Shear fatigue strength of a prismatic diamond sandwich core F. Co^te, V.S. Deshpande* and N.A. Fleck
- Journal of the Mechanics and Physics of Solids 55 (2007) 562588
- International Journal of Fatigue 23 (2001) 375382 www.elsevier.com/locate/ijfatigue
- THE THERMAL SHOCK RESISTANCE OF SOLIDS T. J. LU{ and N. A. FLECK
- Journal of the Mechanics and Physics of Solids 54 (2006) 756782
- INSTITUTE OF PHYSICS PUBLISHING JOURNAL OF MICROMECHANICS AND MICROENGINEERING J. Micromech. Microeng. 15 (2005) 15271535 doi:10.1088/0960-1317/15/8/022
- International Journal of Mechanical Sciences 46 (2004) 561583 Collapse mechanisms of sandwich beams with composite faces
- The mechanical properties of adipose tissue June 2009 1/30 Fleck
- Wear 256 (2004) 735746 Mechanisms governing the high temperature erosion
- Acla melall. maler. Vo\. 43, No.8, pp. 3177-3184, \995 EI~\ier Science Lld
- Isotropic constitutive models for metallic V.S. Deshpande, N.A. Fleck*
- Acta Materialia 51 (2003) 61236137 www.actamat-journals.com
- * Corresponding author. Tel.: #44-01223-332650; fax: 0044-1223-332662. E-mail address: naf1@eng.cam.ac.uk (N.A. Fleck).
- .I.Mrch. P/tw. S&l.7 Vol.41,No. I, pp. 183-11I. 1993 Printedin Great Britain.
- INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING Int. J. Numer. Meth. Engng. 44, 373--391 (1999)
- Spherical indentation of elastic-plastic solids By Sinisa D j. Mesarovic and Norman A. Fleck
- Microbuckle initiation from a hole and from the free edge of a bre composite
- UNIAXIAL STRESSSTRAIN BEHAVIOUR OF ALUMINIUM ALLOY FOAMS
- * Corresponding author. Tel.: #44-01223-332650; fax: #44-01223-332662. E-mail address: na#@eng.cam.ac.uk (N.A. Fleck)
- TOUGHNESS OF ALUMINIUM ALLOY FOAMS K. Y. G. McCULLOUGH, N. A. FLECK and M. F. ASHBY{
- Crack channelling and spalling in a plate due to thermal shock loading
- DEFORMATION AND FAILURE MECHANISMS OF BRAIDED COMPOSITE TUBES IN COMPRESSION AND
- Eur. J. Mech. A/Solids 19 (2000) 259275 2000 ditions scientifiques et mdicales Elsevier SAS. All rights reserved
- Materials Science and Engineering A291 (2000) 136146 Deformation and fracture of aluminium foams
- Eur. J. Mech. A/Solids 20 (2001) 2337 2001 ditions scientifiques et mdicales Elsevier SAS. All rights reserved
- Journal of the Mechanics and Physics of Solids 49 (2001) 785811
- * Corresponding author. Tel.: #44-01223-332650; fax: #44-01223-332662. E-mail address: naf1@eng.cam.ac.uk (N.A. Fleck).
- Journal of the Mechanics and Physics of Solids 49 (2001) 20152030
- The selection of sensors J. Shieh, J.E. Huber, N.A. Fleck *, M.F. Ashby
- Journal of the Mechanics and Physics of Solids 49 (2001) 17471769
- Collapse of truss core sandwich beams in 3-point bending V.S. Deshpande, N.A. Fleck *
- Acta mater. 49 (2001) 43254335 www.elsevier.com/locate/actamat
- Journal of the Mechanics and Physics of Solids 50 (2002) 955977
- Journal of the Mechanics and Physics of Solids 51 (2003) 187208
- Akke S. J. Suiker Koiter Institute Delft,
- Available online at www.sciencedirect.com International Journal of Mechanical Sciences 45 (2003) 851871
- International Journal of Fracture 125: 132, 2004. 2004 Kluwer Academic Publishers. Printed in the Netherlands.
- Mechanisms of crack bridging by composite and metallic rods D.D.R. Cartiea
- N. A. Fleck1 e-mail: naf1@eng.cam.ac.uk
- European Journal of Mechanics A/Solids 23 (2004) 203217 Ferroelectric switching: a micromechanics model
- V. S. Deshpande N. A. Fleck1
- Material selection in sandwich beam construction Craig A. Steeves, Norman A. Fleck *
- INSTITUTE OF PHYSICS PUBLISHING JOURNAL OF MICROMECHANICS AND MICROENGINEERING J. Micromech. Microeng. 15 (2005) S153S164 doi:10.1088/0960-1317/15/7/022
- International Journal of Impact Engineering 31 (2005) 11521171 The use of metal foam projectiles to simulate shock loading
- 10.1098/rspa.2004.1315 Mechanisms of deep penetration of soft solids,
- Materials Science and Engineering A 404 (2005) 2632 Numerical simulations of crack formation from pegs in
- International Journal for Multiscale Computational Engineering, 2(4)599-619(2004) Computational Evaluation of Strain
- V. L. Tagarielli N. A. Fleck
- Wear 260 (2006) 886894 Scaling laws governing the erosion and impact resistance
- International Journal of Impact Engineering 32 (2006) 13841402 The uniaxial stress versus strain response of pig skin
- Journal of the European Ceramic Society 26 (2006) 95109 Fatigue crack growth in ferroelectrics under electrical loading
- Young's modulus of electroplated Ni thin film for MEMS applications J.K. Luoa,*, A.J. Flewitta
- International Journal of Mechanical Sciences 47 (2005) 666686 A constitutive model for transversely isotropic foams, and its
- Page 1 of 29 Effect of imperfections on the actuation stiffness of the Kagome Double Layer Grid
- The response of clamped sandwich plates with metallic foam cores to simulated blast loading
- C. B. W. Pedersen e-mail: cbwp2@eng.cam.ac.uk
- Journal of Biomechanics 39 (2006) 25932602 The penetration of a soft solid by a liquid jet, with application
- European Journal of Mechanics A/Solids 25 (2006) 215229 The response of clamped sandwich plates with lattice cores
- G. J. McShane V. S. Deshpande
- D. D. Radford G. J. McShane
- Mechanics of Materials and Structures
- Damage tolerance of an elastic-brittle diamond-celled honeycomb I. Quintana Alonso and N.A. Fleck*
- International Journal of Mechanical Sciences 50 (2008) 233246 The collapse response of sandwich beams with a Y-frame
- Optimal design of box-section sandwich beams in three-point bending
- An analytic model for the response to water blast of unsupported metallic sandwich panels
- International Journal of Impact Engineering 35 (2008) 829844 The dynamic response of end-clamped sandwich beams
- I. Quintana Alonso N. A. Fleck1
- European Journal of Mechanics A/Solids 28 (2009) 1424 Contents lists available at ScienceDirect
- doi: 10.1098/rspa.2008.0328 , 685-7084652009Proc. R. Soc. A
- A mathematical basis for strain-gradient plasticity theory--Part I: Scalar plastic multiplier
- A multi-scale constitutive model for the sintering of an air-plasma-sprayed thermal barrier coating, and its response under hot
- Available online at www.sciencedirect.com Journal of the European Ceramic Society 29 (2009) 22892296
- Size effects in the bending of thin foils M.I. Idiart a,c
- Polarization change in ferroelectric thin film capacitors under external D. P. Chu,1,a
- Compressive response of a sandwich plate containing a cracked diamond-celled lattice
- Journal of the Mechanics and Physics of Solids 54 (2006) 22422280
- THE RESISTANCE OF METALLIC SANDWICH BEAMS WITH LATTICE CORES TO UNDER-WATER SHOCK LOADING
- YIELD BEHAVIOUR OF COLD COMPACTED COMPOSITE I. SRIDHAR and N. A. FLECK{
- Acta mater.Vol. 45, No. 3, pp. 921-932, 1997 Copyright 0 1997 Acta Metallurgica Inc.
