- Velocity-Level Kinematics of the Atlas Spherical Orienting Device Using Omni-Wheels
- ATLAS: A NOVEL KINEMATIC ARCHITECTURE FOR SIX DOF MOTION PLATFORMS
- TENSEGRITY PLATFORMS AND GEOMETRIC FORM FINDING A.A. Dobson, M.J.D. Hayes
- A Complete Kinematic and Dynamic Model for Spherical Actuation of the Atlas Motion Platform
- CUSP Kinematic Model Development Lucia Martinez M. John D. Hayes
- Mechanical and Aerospace Engineering Capstone Design Projects at Carleton University
- Proceedings of The Canadian Society for Mechanical Engineering Forum 2010 CSME FORUM 2010
- Kinematics of an Atlas Platform with Redundant Contact Points A. WEISS, M.J.D. HAYES, R.G. LANGLOIS
- 13th World Congress in Mechanism and Machine Science, Guanajuato, Mexico, 19-23 June, 2011 A7-561 Quadric Surface Fitting Applications to Approximate Dimensional Synthesis
- Carleton University Department of Mechanical and Aerospace Engineering
- Proceedings of the RAAD 2008 17th International Workshop on Robotics in AlpeAdriaDanube Region
- LOCALIZATION IN LARGE-SCALE UNDERGROUND ENVIRONMENTS WITH RFID S. Radacina Rusu, M. J. D. Hayes
- Type, Number, and Dimensional Synthesis
- Pareto Optimality and Multiobjective Trajectory Planning for a 7-DOF Redundant Manipulator
- This article appeared in a journal published by Elsevier. The attached copy is furnished to the author for internal non-commercial research
- Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference
- IMTC 2008 IEEE International Instrumentation and Measurement Technology Conference
- Towards Workspace Analysis of Platforms with Three Arbitrary Legs M. John D. HAYES 1
- Velocity Level Kinematic Analysis of Serial James D. Robinson and M. John D. Hayes
- Keywords--3D geometric modeling, 3D scanning, laser light-sectioning, Elliptical Fourier Descriptors
- Velocity-Level Kinematics of the Atlas Spherical Orienting Device Using Omni-Wheels
- KINEMATIC MAPPING APPLICATION TO APPROXIMATE TYPE AND DIMENSION
- Proceedings of the WORKSHOP on Fundamental Issues and Future Research Directions for Parallel Mechanisms and Manipulators
- Atlas: A Novel Kinematic Architecture for Six DOF Motion Platforms
- Rigid Body Displacements 2.1 The Isometry Group
- KINEMATIC AND DYNAMIC ANALYSIS OF A SPATIAL ONE-DOF FOLDABLE TENSEGRITY MECHANISM
- The Dynamics of a Single Algebraic Screw Pair J.D. Robinson1
- A Slip Model for the Spherical Actuation of the Atlas Motion J.B. HOLLAND, M.J.D. HAYES, and R.G. LANGLOIS
- PROOF COPY 013405JMD M. J. D. Hayes
- Proceedings of EuCoMeS, the first European Conference on Mechanism Science
- Largest Ellipse Inscribing an Arbitrary Polygon M. John D. HAYES 1
- Kinematic Calibration of Industrial Manipulators Nicholas W. Simpson M. John D. Hayes
- A PLANAR PARALLEL MANIPULATOR WITH HOLONOMIC HIGHER PAIRS: INVERSE KINEMATICS
- Carleton University Simulator Project (CUSP) M.J.D. Hayes1
- Relative Measurement for Kinematic Calibration Using Digital Image Processing
- Unified Treatment of the Kinematic Interface Between a Sphere and Omnidirectional Wheel Actuators
- Dynamic Analysis of a Flexible Beam Undergoing Reciprocating Rotational Motion
- On the kinematic constraint surfaces of general three-legged planar robot platforms
- Kinematic Mapping of Planar Stewart-Gough Platforms M. John D. HAYES 1
- Kinematic Calibration Procedure for Serial Robots with Six Revolute Axes
- Reconfigurable Planar Three-Legged Parallel Manipulators
- Proceedings of the Second International Workshop on Fundamental Issues and Future Research Directions for Parallel Mechanisms and Manipulators
- Advanced Kinematics Lecture Notes
- A Novel Approach to Designing Engineers M. John D. HAYES Malcolm J. BIBBY
- Position Level Kinematics of the Atlas Motion R. Beranek and M.J.D. Hayes
- Reciprocating excitation of a flexible beam: Benchmark study R.G. Langlois, M.J.D. Hayes *
- CSME 2004 Forum 1 Use of the HLA in a Real-Time Multi-Vehicle Simulator
- Contributions to the Promotion of Mechanism and Machine Science by the IFToMM Canadian Community (CCToMM)
- An Integrated Optical-Robotic Measurement System M.J.D. Hayes 1
- Towards Integrated Type and Dimensional Synthesis of Mechanisms for Rigid Body Guidance
- 12th IFToMM World Congress, Besancon, June 18-21, 2007 CK-xxx Temperature-Induced Deformation in a Mechanical System
- Extreme Distance to a Spatial Circle P.J. ZSOMBOR-MURRAY1
- Noname manuscript No. (will be inserted by the editor)
- Experiments in real-time map-based underground global positioning S. Radacina Rusu and M. J. D. Hayes
- Grassmannian Reduction of Quadratic Forms P.J. Zsombor-Murray M.J.D. Hayes
- A Dynamic Programming Approach to Redundancy Resolution with Multiple Criteria
- A SLIP MODEL FOR THE SPHERICALACTUATION OF THE ATLAS MOTION J.B. Holland, M.J.D. Hayes and R.G. Langlois
- Direct Kinematic Mapping for General Planar Parallel Manipulators
- Advanced Kinematics Assigned: September 12, 2011 Due: October 24, 2011.
- Integrated Type And Dimensional Synthesis of Planar Four-Bar Mechanisms
- WORKSPACE CHARACTERIZATION OF PLANAR THREE-LEGGED PLATFORMS WITH HOLONOMIC HIGHER PAIRS
- Int. J. Advanced Media and Communication, Vol. 3, Nos. 1/2, 2009 35 A 3D scanning system for biomedical purposes
- THE DYNAMICS OF A SINGLE ALGEBRAIC SCREW PAIR James D. Robinson1
- TENTH WORLD CONGRESS ON THE THEORY OF MACHINES AND MECHANISMS
- Kinematic Calibration of Six-Axis Robots Kathleen English
- The kinematic analysis and synthesis of mechanisms, or any type of linkage, is greatly facilitated by suitable geometric representation, or algebraic formulation,
- Analytic Projective 5.1 Line and Point Coordinates: Duality in the
- Elementary Kinematics from an Advanced Standpoint Paul J. ZSOMBOR-MURRAY 1
- Development of the Several Integrated Degree-of-Freedom Demonstrator (SIDFreD) Simulator
- Integrated Type and Approximate Dimensional Synthesis of Four-Bar Planar Mechanisms for Rigid Body Guidance
- Proceedings of DETC/CIE'02 2002 ASME Design Engineering Technical Conferences
- Singular Configurations of Wrist-Partitioned 6R Serial Robots: a Geometric Perspective for Users
- Copyright by SIAM. Unauthorized reproduction of this article is prohibited. SIAM J. CONTROL OPTIM. c 2009 Society for Industrial and Applied Mathematics
