- Application of New Feeding Rules To Risering of Steel Castings
- hf. J. Hcut Mau lian~fir. Vol 31, No. I, pp. 3546. 1988 0017-9310/88$3.00+0.00 Prmtcd in Great Br~tam :r` 1988 Pergamon Journals Ltd
- Acta mater. 49 (2001) 40414054 www.elsevier.com/locate/actamat
- Feeding of High-Nickel Alloy Castings KENT D. CARLSON, SHOUZHU OU, and CHRISTOPH BECKERMANN
- This article appeared in a journal published by Elsevier. The attached copy is furnished to the author for internal non-commercial research
- Prediction of Shrinkage Pore Volume Fraction Using a Dimensionless Niyama Criterion
- METALLURGICAL AND MATERIALS TRANSACTIONS A U.S. GOVERNMENT WORK
- 14. S.E. Battersby, R.F. Cochrane, and A.M. Mullis: J. Mater. Sci., 1999, vol. 34, pp. 2049-56. +
- Fig. 2 Correlation of natural convection data Test data are correlated in Fig. 2 in the form of a Nu versus
- the accuracy of the method can be found from Hong et al. (1994a), Hong and Rubinsky (1994), and Hong (1993).
- MCWASP 2009 Edited by ... TMS (The Minerals, Metals & Materials Society), 2009
- This article appeared in a journal published by Elsevier. The attached copy is furnished to the author for internal non-commercial research
- Equiaxed Dendritic Solidification with Convection: Part I1. Numerical Simulations for an AI-4 Wt Pct Cu Alloy
- The Effect of Pour Time and Head Height on Air Entrainment Malcolm Blair, Technical and Research Director, SFSA
- Simulation of Heat Treatment Distortion R.A. Hardin1
- Natural Convection of Liquid Metals in Vertical Cavities
- Technical Notes 1547 ht. J. Hear Mass Transfer. Vol. 30, No. I, pp. 1547-1551, 1987
- A Solutal Interaction Mechanism for the Columnar-to-Equiaxed Transition in Alloy Solidification
- Effect of melt convection and solid transport on macrosegregation and grain structure in equiaxed Al/Cu alloys
- A Unified Model of Microsegregation and Coarsening V.R. VOLLER and C. BECKERMANN
- Modeling of Reoxidation Inclusion Formation in Steel Sand Casting K.D. Carlson, A.J. Melendez and C. Beckermann
- C. Beckermann S. Ramadhyani
- Development of Thermophysical Property Datasets, Benchmark Niyama Results, and A Simulation
- Analysis of Water Modeling of Air Entrainment
- Phase-field modeling of binary alloy solidification with coupled heat and solute diffusion J. C. Ramirez,1
- Feeding & Risering Guidelines for
- *Corresponding author. Journal of Crystal Growth 187 (1998) 289--302
- Journal of Crystal Growth 280 (2005) 320334 Three-dimensional phase-field simulations of the effect of
- METALLURGICAL AND MATERIALS TRANSACTIONS A VOLUME 28A, JULY 1997--1533 Motion and Remelting of Dendrite Fragments during
- C. Beckermann Associate Professor.
- MODELING OF POROSITY FORMATION AND FEEDING FLOW IN STEEL CASTING
- Formation of Macrosegregation by Multicomponent Thermosolutal Convection during the Solidificationof Steel
- Fatigue of 8630 cast steel in the presence of K. M. Sigl{, R. A. Hardin, R. I. Stephens and C. Beckermann*
- MODELING OF POROSITY FORMATION IN ALUMINUM ALLOYS Kent D. Carlson1
- A NEW STANDARD FOR RADIOGRAPHIC ACCEPTANCE CRITERIA FOR STEEL CASTINGS
- Microstructure evolution in equiaxed dendritic growth C. Beckermann*, Q. Li, X. Tong
- Modeling the Effect of Finite-Rate Hydrogen Diffusion on Porosity Formation in Aluminum Alloys
- Effect of mould expansion on pattern allowances in sand casting of steel
- EFFECT OF POROSITY ON MECHANICAL PROPERTIES OF 8630 CAST STEEL
- 7International Journal of Metalcasting/Fall 10 MEASUREMENT OF ELASTIC MODULUS OF
- Prediction of burn-on and mould penetration in steel casting using simulation
- 1 Copyright 2004 by ASME PHASE-FIELD SIMULATION OF SOLIDIFICATION WITH DENSITY CHANGE
- SIMULATION OF POROSITY AND HOT TEARS IN A SQUEEZE CAST MAGNESIUM CONTROL ARM
- Presented at the 63rd Technical and Operating Conference of the of the Steel Founders' Society of
- DEVELOPMENT OF A MODEL FOR TRANSIENT SIMULATION AND CONTROL OF A CONTINUOUS STEEL SLAB CASTER
- Prediction of Riser Carbon Macrosegregation due to Shrinkage Flow in Steel Casting
- Phase-field simulation of the columnar-to-equiaxed transition in alloy solidification
- Journal of Computational Physics 154, 468496 (1999) Article ID jcph.1999.6323, available online at http://www.idealibrary.com on
- MCWASP 2009 Edited by ... TMS (The Minerals, Metals & Materials Society), 2009
- Prediction of Reoxidation Inclusion Composition in Casting of Steel
- 41International Journal of Metalcasting/Fall 08 Prediction of Hot tear formation in a
- Development of New Feeding-Distance Rules Using Casting Simulation: Part I. Methodology
- This article was published in an Elsevier journal. The attached copy is furnished to the author for non-commercial research and
- 2005 May JOM 29 Casting DefectsOverview
- Water Modeling of Steel Flow, Air Entrainment and Filtration
- FATIGUE OF 8630 CAST STEEL IN THE PRESENCE OF SHRINKAGE POROSITY
- "Maximizing resources through a global network of materials specialists" | SUMMER 2008 COMMUNICATIONS
- UNCONVENTIONAL METHODS FOR YIELD IMPROVEMENT
- An Experimental Study of Melting of Binary Mixtures with Double-Diffusive Convection in
- Table 3 TheNuL Gr{ 1/5 results for power law variation of the surface
- 0. Beckermann Department of Mechanical Engineering,
- On the Effect of Porous Layers on Melting Heat Transfer in an Enclosure
- Effects of simplified enthalpy relations on the prediction of heat transfer during solidification of
- T. F. Smith Member ASME
- Mathematical modeling of transport phenomena during alloy solidification
- hr. J. ffeleotMass Transfer. Vol. 36, No. 1I, pp. 2741-2158, 1993 0017.-9310/93 36.0O+O.C~l Printed in Great Britain Q 1993 Pergamon Press Ltd
- In,. J. Heat Mass Transfer. Vol. 36,No. 11.pp. 2159-2768,1993 0017-9310/93$6.00+0.00 Printedin GreatBritain 0 1993Pergamon PressLtd
- A Multiphase Solute Diffusion Model for Dendritic Alloy Solidification
- Prediction of Columnar to Equiaxed Transition during Diffusion-Controlled Dendritic Alloy Solidification
- Multiparticle Interfacial Drag in Equiaxed Solidification C.Y. WANG, S. AHUJA, C. BECKERMANN, and H.C. de GROH III
- Modeling Segregation and Grain Structure Development in Equiaxed
- METALLURGICAL AND MATERIALS TRANSACTIONS B VOLUME 28B, DECEMBER 1997--1165 Modeling of Solidification of Metal-Matrix Particulate
- METALLURGICAL AND MATERIALS TRANSACTIONS B VOLUME 28B, JUNE 1997--479 Modeling of Macrosegregation Due to Thermosolutal
- Scaling behavior of three-dimensional dendrites Q. Li and C. Beckermann*
- THREE-DIMENSIONAL MODELING OF EQUIAXED DENDRITIC GROWTH ON A MESOSCOPIC SCALE
- Simulation of Convection and Macrosegregation in a Large Steel Ingot
- Velocity and shape selection of dendritic crystals in a forced flow C. Beckermann,1,
- Development of a Freckle Predictor via Rayleigh Number Method for Single-Crystal Nickel-Base Superalloy
- Journal of Crystal Growth 222 (2001) 380391 Measurement of the density of succinonitrileacetone alloys
- Phase-field simulations of dendritic crystal growth in a forced flow C. Beckermann,1,
- Journal of Crystal Growth 236 (2002) 482498 Modeling of free dendritic growth of succinonitrileacetone
- Modelling of macrosegregation: applications and future needs
- Development of New Feeding-Distance Rules Using Casting Simulation: Part II. The New Rules
- THREE-DIMENSIONAL SIMULATION OF FRECKLE FORMATION DURING BINARY ALLOY SOLIDIFICATION
- Physica D 198 (2004) 281308 Diffuse interface modeling of two-phase flows based on averaging
- Materials Science and Engineering A 413-414 (2005) 3036 Development of a hot tear indicator for steel castings
- Prediction of Reoxidation Inclusion Composition in Casting of Steel
- Effect of Porosity on the Stiffness of Cast Steel RICHARD A. HARDIN and CHRISTOPH BECKERMANN
- Author's personal copy Physica D 237 (2008) 30893098
- Prediction of the Fatigue Life of Cast Steel Containing Shrinkage Porosity
- Authors' Reply to Discussion of ``Prediction of Shrinkage Pore
- Modelling of reoxidation inclusion formation in steel sand casting
- Simulation of Stresses during Casting of Binary Magnesium-Aluminum Alloys
- 1. Introduction Recently, X-ray imaging techniques have emerged as an
- Capabilities and Integration Potential of Current Casting Design Software
- Simulation of Convection and Macrosegregation in Steel Casting C. Beckermann* and M. C. Schneider**
- The Current State of Casting Yield: Results from the 1997 Steel Founders'
- A Computational Study of Feeding Rules and Yield Improvement Techniques
- Progress in the Development of Improved Feeding Rules for the Risering of Steel
- ANALYSIS OF ASTM X-RAY SHRINKAGE RATING FOR STEEL CASTINGS
- YIELD IMPROVEMENT CASE STUDY: STACKED SPRING CAPS
- Presented at the Flemings Symposium, Boston, MA, June 2000 MODELING OF MACROSEGREGATION: PAST, PRESENT AND FUTURE
- The application of higher than atmospheric pressure to the risers of steel castings has been reported in the foundry literature going back at least to the 1940's. In these reports, the
- Macrosegregation Macrosegregation refers to variations in composition
- Convection Effects in Three-Dimensional Dendritic Growth , C. Beckermann1
- Annu. Rev. Mater. Res. 2002. 32:16394 doi: 10.1146/annurev.matsci.32.101901.155803
- 1 Copyright 2002 by ASME Proceedings of IMECE2002
- Feeding and Risering of High Alloy Steel Castings
- Modeling of Reoxidation Inclusion Formation During Filling of Steel Castings
- Phase-field simulation of two-phase micro-flows in a Hele-Shaw cell
- INTEGRATED DESIGN OF STEEL CASTINGS FOR SERVICE PERFORMANCE
- Simulation of Hot Tearing and Distortion during Casting of Steel: Comparison with Experiments
- Growth of equiaxed dendritic crystals settling in an undercooled melt
- Deformation during casting of steel: model and material C. Beckermann
- Round Robin Study to Assess Variations in Casting Simulation Niyama Criterion Predictions
- Simulation of Reoxidation Inclusion Formation in Steel Casting
- PREDICTION OF DEFORMATION AND HOT TEAR FORMATION USING A VISCOPLASTIC MODEL WITH DAMAGE
- MCWASP 2009 Edited by ... TMS (The Minerals, Metals & Materials Society), 2009
- Modeling and in-situ X-Ray video microscopy of confined equiaxed grain growth in Al-Cu Edited by TMS (The Minerals, Metals & Materials Society), 2008
- Presented at the 63rd Technical and Operating Conference of the Steel Founders' Society of America,
- Measurement of Elastic Modulus of PUNB Bonded Sand as a Function of Temperature J. Thole and C. Beckermann
- SIMULATION OF STRESSES DURING CASTING OF BINARY MAGNESIUM-ALUMINUM ALLOYS M.G. Pokorny1
- Journal of Crystal Growth 275 (2005) 624638 Transient growth and interaction of equiaxed dendrites
- Examination of binary alloy free dendritic growth theories with a phase-field model
- Vehicle and Heavy Equipment Integrated Product & Process Development (IPPD)
- the university of iowa College of engineering Man of steel
- Simulation of the Mechanical Performance of Cast Steel with Porosity: Static Properties
- hf. J. Hear Mass Transfer. Vol. 31, No. 10, pp. 2077-2089, 1988 0017-9310/88 $3.co+o.O0 Printed in Great Britain 0 1988 Pergamon Press plc
- EVOLUTION OF THE SIDEBRANCH STRUCTURE IN FREE DENDRITIC GROWTH
- Macrosegregation Christoph Beckermann, University of Iowa
- Presented at the 64th Technical and Operating Conference of the Steel Founders' Society of America, December 9-11, 2010, Chicago, Illinois.
- Feeding and Risering of High-Alloy Steel Castings SHOUZHU OU, KENT D. CARLSON, and CHRISTOPH BECKERMANN
- I. INTRODUCTION IN order to remain competitive in the worldwide market
- Development of a Hot Tear Indicator for Steel Castings C. Monroe, C. Beckermann
- TILT POUR TRIALS AND ANALYSIS Bob Bryant1
- ISIJ International. Vol. 35 (1995). No. 6, pp. 665-672 Simulation of
- Equiaxed Dendritic Solidification with Convection Part I. Multiscale/Multiphase Modeling
- This article appeared in a journal published by Elsevier. The attached copy is furnished to the author for internal non-commercial research
- METALLURGICAL AND MATERIALS TRANSACTIONS A VOLUME 34A, JULY 2003--1525 Evaluation of a Rayleigh-Number-Based Freckle Criterion for
- Development of a Hot Tear Indicator for Use in Casting Simulation C. Beckermann
- Research activity related to transport mechanisms for heat and mass during solidification is the key to efficient and intelligent manufacturing process. Gaming fundamental understanding of the transport phe-
- This article was published in an Elsevier journal. The attached copy is furnished to the author for non-commercial research and
- Calculation of Dendrite Settling Velocities Using a Porous Envelope
- Equiaxed Dendritic Solidification with Convection" Part II1. Comparisons with NH4CI-H20 Experiments
- COMPARISON OF FATIGUE BEHAVIOR FOR CENTRIFUGALLY CAST AND
- Feeding of Nickel-Based Alloys Kent D. Carlson, Shouzhu Ou and Christoph Beckermann
- A Volume-Averaged Two-Phase Model for Transport Phenomena during Solidification
- Bringing you a prosperous future where energy is clean, abundant, reliable and affordable Industrial Technologies Program
- Presented at the 61st Technical and Operating Conference of the of the Steel Founders' Society of
- Use of the Niyama Criterion To Predict Shrinkage-Related Leaks in High-Nickel
- Journal of Crystal Growth 197 (1999) 355--363 Equiaxed dendritic solidification in supercooled melts
- Sharp interface tracking using the phase-field equation Y. Sun, C. Beckermann *
- PREDICTION OF HEAT TREATMENT DISTORTION OF CAST STEEL C-RINGS
- PREDICTION OF BURN-ON AND MOLD PENETRATION IN STEEL CASTING USING SIMULATION
- Modeling of Reoxidation Inclusion Formation During Filling of Steel Castings Kent D. Carlson and Christoph Beckermann
- Simulation of Dimensional Changes in Steel Casting
- An Experimental Study of Deformation of a Columnar Dendritic Mushy Zone Using a Transparent
- Bringing you a prosperous future where energy is clean, abundant, reliable and affordable Industrial Technologies Program
- SIMULATION OF CONVECTION AND RIPENING IN A BINARY ALLOY MUSH USING THE PHASE-FIELD
- Effect of Shrinkage on Service Performance of Steel Castings
- DEVELOPMENT OF A METHODOLOGY TO PREDICT AND PREVENT LEAKS CAUSED
- Heat transfer Session 2 1 Dsseldorf, 27 June 1 July 2011
- Determination of solid fractiontemperature relation and latent heat using full scale
- Measurement of Gas Evolution from PUNB Bonded Sand as a Function of Temperature G. Samuels and C. Beckermann
- Richard A. Hardin and Christoph Beckermann Department of Mechanical and Industrial Engineering
- This article appeared in a journal published by Elsevier. The attached copy is furnished to the author for internal non-commercial research
- Measurement and Prediction of Stresses during Casting of a Steel Bar , C. Monroe2
