
- A Numerical Study of the Transverse Modulus of Wood as a Function of Grain Orientation and Properties
- MATERIAL POINT METHOD CALCULATIONS WITH EXPLICIT CRACKS, FRACTURE PARAMETERS, AND CRACK
- Comput. Methods Appl. Mech. Engrg, 191, 20952109 (2002) Hierarchical, Adaptive, Material Point Method for Dynamic Energy Release
- HYGROTHERMAL AGING OF POLYIMIDE MATRIX COMPOSITE LAMINATES
- MODE II FRACTURE BEHAVIOR OF BONDED VISCOELASTIC THERMAL COMPRESSED WOOD
- International Journal of Fracture volume 5, number 2, 167181 (2009)
- Mechanics of Materials 26 (1997) 6380 On the Use of Shear-Lag Methods for Analysis of Stress Transfer in
- Material Point Method Simulations of Transverse Fracture in Wood with Realistic Morphologies
- Fracture Toughness of MDF and other Materials with Fiber Bridging
- Engr. Fract. Mech., in press (2004) Simulation of Crack Growth in Ductile Materials
- Copyright c 2006 Tech Science Press CMES, vol.1, no.1, pp.11-25, 2006 Three-Dimensional Dynamic Fracture Analysis Using the Material Point Method
- A Revised Shear-Lag Analysis of an Energy Model for Fiber-Matrix Debonding
- Engineering Fracture Mechanics, 41, 203221 (1992). The Formation and Effect of Outer-Ply Microcracks in
- International Journal of Fracture, 105: 243271, 2000. c 2000 Kluwer Academic Publishers. Author prepared preprint
- J. Materials Science, 37, 3965-3972 (2002) Author prepared reprint Experimental Verification of the Effects of Friction and Residual Stress on the
- Submitted to Journal of Composite Materials THE INFLUENCE OF INTERNAL STRESSES ON THE
- Numerical Implementation of Imperfect Interfaces John A. Nairn
- NUMERICAL SIMULATIONS OF TRANSVERSE COMPRESSION AND DENSIFICATION IN WOOD
- Engineering Fracture Mechanics 00 (2000) 1-25 Author prepared preprint Fracture mechanics analysis of coating/substrate systems
- Proc. 2nd ESIS TC4 Conference on Polymers and Composites, in press, 1999
- J. Adhesion, 1995, Vol. 53 pp. 4568 Author prepared reprint
- November 21, 2008 11:23 Journal of Statistical Computation & Simulation Splitting Journal of Statistical Computation & Simulation
- Polar Shear Lag Analysis of a Composite of Concentric Cylinders with Longitudinal Cracks: Application to Internal Checking in Wood
- Adv. Comp. Letts., in press (2005) Generalized Shear-Lag Analysis Including Imperfect Interfaces
- International Journal of Fracture submitted (2011)
- Fracture Modeling of Crack Propagation in Wood and Wood Composites Including Crack Tip Processes and Fiber Bridging Mechanics
- FRACTURE MECHANICS OF THE MICROBOND AND PULL-OUT TESTS
- International Journal of Fracture, 139, 267293 (2006) On the calculation of energy release rates for cracked laminates
- 2003 Society of Vacuum Coaters 505/856-7188 1 46th Annual Technical Conference Proceedings (2003) ISSN 0737-5921
- 5th Int'l Conf. on Deform. and Fract. of Comp., London, UK, March 1819, 1999. APPLICATIONS OF FINITE FRACTURE MECHANICS
- Int. J. Solids Structures, Vol. 34, No. 10, pp 1255-1281, 1996 Author prepared preprint STRESS TRANSFER INTO A FRAGMENTED,
- John A. Nairn1 , Yung Ching Liu1
- International Journal of Adhesion & Adhesives 20 (1999) 5970 International Journal of
- J. A. Nairn Material Science & Engineering,
- International Journal of Adhesion & Adhesives 19 (1999) 5970 Analytical and experimental methods for a fracture mechanics
- Polymer Matrix Composites, Chapter 13, R. Talreja and J-A. Manson, eds., in press (2000) Volume 2 of Comprehensive Composite Materials, A. Kelly and C. Zweben, eds., Elsevier Science
- Proc. 16th Ann. Tech. Conf. of the Amer. Soc. Composites, VPI, Blacksburg VA, September 9-12, 2001. Fracture Mechanics Analysis of the Single-Fiber Pull-Out
- FRACTURE TOUGHNESS OF WOOD AND WOOD COMPOSITES
- Aspect Ratio Requirements for Nanotube-Reinforced, Polymer-Matrix Composites
- Numerical Modeling and Experiments on the Role of Strand-to-Strand Interface Quality on the Properties of Oriented Strand Board
- The Fracture Toughness of Medium Density Fiberboard (MDF) Including the Effects of Fiber Bridging and Crack-Plane Interference
- NUMERICAL MODELING OF DEFORMATION AND FRACTURE OF WOOD INCLUDING HETEROGENEITY AND ANISOTROPY
- Copyright c 2004 Tech Science Press CMES, vol.?, no.?, pp.1-14, 2004 Calculation of J-Integral and Stress Intensity Factors using the Material Point
- RESIDUAL STRESS EFFECTS IN FRACTURE OF COMPOSITES AND ADHESIVES
- FINITE FRACTURE MECHANICS OF MATRIX MICROCRACKING IN COMPOSITES
- Copyright c 2003 Tech Science Press CMES, vol.4, no.6, pp.649-663, 2003 Material Point Method Calculations with Explicit Cracks
- Composites Part A, 34, 979-986 (2003) Author prepared reprint Hygrothermal Aging of Polyimide Matrix Composite Laminates
- International Journal of Adhesion and Adhesives, submitted (2002) A Compression-Loaded Double Lap Shear Test: Part 1, Theory
- ELSEVIER Mechanics of Materials 33 (2001) 335-362 www.elsevier.com/locate/mechmat
- Composites Science and Technology, 61, 2159-2167 (2000) c 2000 Elsevier Science Limited
- INVESTIGATION OF LOAD TRANSFER BETWEEN THE FIBER AND THE MATRIX IN PULL-OUT TESTS WITH FIBERS HAVING DIFFERENT DIAMETERS
- European Conference on Composite Materials, Brighton, United Kingdom, 4-7 June 2000.
- Advanced Composite Letters, Vol. 9, No. 6, 373-383 (2000) Full Article ANALYTICAL FRACTURE MECHANICS ANALYSIS OF THE
- Engineering Fracture Mechanics 00 (2000) 1-24 Author prepared preprint Fracture mechanics analysis of coating/substrate systems
- Stress Transfer From the Matrix to the Fibre in a Fragmentation Test: Raman
- Usingthe Essential Work of Fracture Method for Studying Physical Aging in Thin,
- Composite Interfaces, Vol 4, pp. 241267 (1996) Author prepared preprint
- The Effect of Hygrothermal Aging on the Microcracking Properties of of Some Carbon Fiber/Polyimide Laminates
- Proceedings of ICCM-10, Whistler, B. C., Canada, August 1995 SOME NEW VARIATIONAL MECHANICS RESULTS ON
- Proceedings of ANTEC `95, Boston, MA, May 7-11, 1995. MEASUREMENT OF THE FRICTION AND LUBRICITY
- International Journal of Fracture, 57, 124 (1992). The Initiation and Growth of Delaminations Induced
- (Proceedings of the 5th Technical Conference on Composite Materials, American Society of Composites,