- Safety and Reliability for Managing Risk Guedes Soares & Zio (eds) 2006 Taylor & Francis Group, London, ISBN 0-415-41620-5
- IEEE Transactions on Electronics Packaging Manufacturing, 2001 On the Use of Yielded Cost in Modeling Electronic
- Proceedings of the 2007 Aging Aircraft Conference Cost Model for Assessing the Transition to Lead-Free Electronics
- IEEE Trans. on Reliability, Vol. 58, No. 2, pp. 305-316, June 2009 A Methodology for Determining the Return on Investment Associated with
- University of Maryland1Center for Advanced Life Cycle Engineering DMSMS Lifetime Buy Characterization
- Designing Engineering Systems for Sustainability Peter Sandborn and Jessica Myers
- 1. INTRODUCTION The electronics industry is one of the most dynamic
- Microelectronics Reliability, Vol. 47, No. 12, pp. 1857-1864, December 2007 Life Cycle Cost Impact of Using Prognostic Health Management (PHM)
- International Journal of Computer Integrated Manufacturing *Corresponding author. Email: sandborn@umd.edu
- 1 Copyright 2011 by ASME Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and
- University of Maryland1Center for Advanced Life Cycle Engineering Calculating the Return on Investment
- IEEE Trans on Components and Packaging Technologies, Vol. 30, No. 4, pp. 886-888, December 2007. Software Obsolescence Complicating the Part and Technology Obsolescence
- Microelectronics Reliability, Vol. 47, No. 12, pp. 1889-1901, Dec. 2007 A Maintenance Planning and Business Case Development Model for the
- Microelectronics Reliability, Vol. 47, No. 12, pp. 1847-1848, December 2007. Guest Editorial
- Using Embedded Resistor Emulation and Trimming to Demonstrate Measurement
- Proceedings of the 2007 Aging Aircraft Conference Integration of Technology Roadmapping Information and Business Case
- The Engineering Economist, Vol. 51, No. 2, pp. 115-139, April-June 2006 1 OBSOLESCENCE DRIVEN DESIGN REFRESH PLANNING FOR SUSTAINMENT-
- Proceedings of the International Electronics Packaging Education Conference (at the ECTC), May 30, 2006 Using Teardown Analysis as a Vehicle to Teach Electronic Systems Manufacturing Cost Modeling
- To be published in IEEE Trans. on Electronics Packaging Manufacturing July 26, 2004 Peter Sandborn 1
- DMSMS Center of Excellence Newsletter Vol. 2, Issue 4, July 2004 Beyond Reactive Thinking We Should be Developing Pro-Active Approaches to
- P. Sandborn and P. Singh, "Forecasting Technology Insertion Concurrent with Design Refresh Planning for COTS-Based Electronics Systems," Logistics Spectrum, Vol. 38, No. 2, pp. 25-28, April-June 2004.
- Volume 7 Issue 2 2004 2004 IJAMS
- Optimum Technology Insertion into Systems Based on the Assessment of Viability
- Proceedings of the International Test Conference, October 2003 Optimization of Test/Diagnosis/Rework Location(s) and Characteristics in
- Circuit World, Vol. 30, No. 1, pp. 25-30, 2003 Cost and production analysis for substrates with embedded passives
- Joint FAA/DoD/NASA Aging Aircraft Conference Sept.16-19, 2002 Page 1 of 13
- Paper 40.2 ITC INTERNATIONAL TEST CONFERENCE A New Test/Diagnosis/Rework Model for Use in Technical Cost Modeling of
- IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING, VOL. 24, NO. 3, JULY 2001 203 Application-Specific Economic Analysis of Integral
- IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING, VOL. 22, NO. 2, APRIL 1999 105 A Model for Optimizing the Assembly
- THE PRIMARY DRIVER of today's com-mercial electronics market is time. Portable
- Minimization of Life Cycle Costs Through Optimization of the Validation Program A Test Sample Size and Warranty Cost
- Proceedings of the IEEE/ACM Design Automation Conference, New Orleans, LA, pp. 269-274, June 2002 A Detailed Cost Model for Concurrent Use With
- DMSMS Knowledge Sharing Portal Newsletter, Vol. 4, Issue 4, pp. 3 and 11, June 2006 The Other Half of the DMSMS Problem -Software Obsolescence
- Analysis of the Cost of Embedded Passives in Printed Circuit Boards Peter Sandborn, Bevin Etienne and Daniel Becker
- Proceedings of the 2005 DMSMS Conference A Data Mining Based Approach to Electronic Part Obsolescence Forecasting
- Copyright 2003 by ASME Proceedings of InterPACK03
- Proceedings of the Capacitor and Resistor Technology Symposium (CARTS), Scottsdale, AZ, April 2003 Joseph P. Dougherty Page 1 CARTS April 1, 2003
- Int. Journal of Eng. Education, Vol. 25, No. 1, pp. 42-52, 2009 Using Teardown Analysis as a Vehicle to Teach Electronic Systems
- Annual Conference of the Prognostics and Health Management Society, 2010 A Design for Availability Approach for Use with PHM
- This article was published in an Elsevier journal. The attached copy is furnished to the author for non-commercial research and
- International Journal of Performability Engineering Vol. 1, No. 2, October 2005, pp. 105-120 Beyond Tools: A Design for Environment Process
- A comparison of routing estimation methods for microelectronic modules
- IEEE TRANSACTIONS ON COMPONENTS, PACKAGING, AND MANUFACTURING TECHNOLOGY--PART C, VOL. 21, NO. 2, APRIL 1998 97 Material-Centric Modeling of PWB Fabrication
- Copyright 2008 by ASME Proceedings of the ASME 2008 International Design Engineering Technical Conferences & Computers and
- in Integrated Passive Component Technology, R. Ulrich and L. Schaper editors, Wiley-IEEE Press, 2003. 13. The Economics of Embedded Passives
- By Peter Sandborn Strategic Management
- Proceedings of the 2007 Aging Aircraft Conference Lifetime Buy Optimization to Minimize Lifecycle Cost
- to be published in Proc. Reliability and Maintainability Symposium, Arlington, VA, Jan. 2005 1 Forecasting Technology Insertion Concurrent with Design Refresh
- Proceedings of the 2007 Industrial Engineering Research Conference G. Bayraksan, W. Lin, Y. Son, and R. Wysk, eds.
- 1 Copyright 2011 by ASME Proceedings of the ASME 2011 International Design Engineering Technical Conferences &
- Proceedings of the 2007 Aging Aircraft Conference A Taxonomy and Evaluation Criteria for DMSMS Tools, Databases and Services
- IEEE Trans. on Components and Packaging Technologies, Vol. 30, No. 3, pp. 397-401, Sept. 2007. A Data Mining Based Approach to Electronic Part Obsolescence Forecasting
- Application-Specific Economic Analysis of Integral Passives in Printed Circuit Boards
- IEEE Trans. On Advance Packaging, Vol. 31, No. 1, pp. 76-83, Feb. 2008. A Random Trimming Approach for Obtaining High-Precision
- IEEE Trans. on Components and Packaging Technologies, Dec. 2000, pp. 707-717 1 Electronic Part Life Cycle Concepts and Obsolescence Forecasting
- Determining Optimum Redesign Plans for Avionics Based on Electronic Part Obsolescence Forecasts
- 1 Journal of Electronic Testing Theory and Application, 2006 Optimization of Test/Diagnosis/Rework Location(s) and Characteristics in
- Proceedings of the International Conference on Prognostics and Health Management, Denver, CO, October 2008. Abstract--Prognostics and Health Management (PHM)
- Copyright 2001 by ASME1 Proceedings of DETC'01
- A warranty forecasting model based on piecewise statistical distributions and stochastic simulation
- Microelectronics Reliability, Vol. 51, pp. 392-399, 2011 Forecasting electronic part procurement lifetimes to enable the
- Progress on Internet-Based Educational Material Development for Electronic Products and Systems Cost Analysis
- IEEE Trans. on Electronics Packaging Manufacturing, Vol. 30, No. 4, pp. 246-257, October 2007. Optimizing Embedded Passive Content in Printed Circuit Boards
- Copyright 2003 by ASME1 Proceedings of DETC'03
- Using Real Options to Manage Condition-Based Maintenance Enabled by PHM
- A REAL OPTIONS OPTIMIZATION MODEL TO MEET AVAILABILITY REQUIREMENTS FOR OFFSHORE WIND TURBINES
- 1 INTRODUCTION Alternative energy sources have increasingly gained
- Using PHM to Meet Availability-Based Contracting Requirements
