| Sample search results for: abaqus thermomechanics code |
| 1 | Koric, S. and B.G. Thomas, "Efficient Thermo-Mechanical Model for Solidification Processes", Int. J. Num. Meths. Eng, Vol. 66 No. 12, (June) 2006, pp. 1955-1989. | ||
|
Summary: element code CON2D [3,4,7,8] specialized in thermo-mechanical modeling of continuous casting. Both finite... viscoplastic integration schemes from an in-house code CON2D into the commercial finite element package Abaqus... (14) just need to be coded and Abaqus will ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 2 | Thermo-Mechanical Model of Solidification Processes with Seid Koric and Brian G. Thomas | ||
|
Summary: Thermo-Mechanical Model of Solidification Processes with Abaqus Seid Koric and Brian G. Thomas... . A novel 3D thermo-mechanical analysis of a thin slab casting is performed with our Abaqus model with UMAT... Abaqus Users Conf., May 22-24, 2007, Paris, France, June, 2007, 15p. #12;7. ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 3 | NEURAL NETWORK BASED FAILURE PREDICTION MODEL FOR COMPOSITE HYDROGEN STORAGE CYLINDERS | ||
|
Summary: element code ABAQUS (Mitlitsky, 2000) to analyze the failure of the composite cylinder. Due to a large... and meshed using ABAQUS (2001) commercial Finite Element Analysis code (Fig. 2). A laminated shell element (S... to thermo-mechanical loading. A backpropagation Neural Network model ... |
|||
|
Source: Ragsdell, Kenneth M. - Design Engineering Center, University of Missouri-Rolla |
|||
|
Collection: Engineering |
|||
| 4 | Characterization and 3-D Modeling of Ni60Ti SMA for Actuation of a Variable Geometry Jet Engine Chevron | ||
|
Summary: .S.A. ABSTRACT This work describes the thermomechanical characterization and FEA modeling of commercial jet... thermomechanical experiments are performed on trained (stabilized) standard SMA tensile specimens. Primary among... -rich Ni-Ti alloys have excellent thermomechanical stability, their transition temperature can be set |
|||
|
Source: Texas A&M University, Department of Aerospace Engineering, Shape Memory Alloy Research Team |
|||
|
Collection: Engineering ; Materials Science |
|||
| 5 | An ABAQUS User Subroutine for a Modified Cohesive Zone Model that Regularizes Convergence and Instability Problems | ||
|
Summary: the cohesive zone law. More coding details can be found in ABAQUS manual. FILES · CZM_for_instability.for User... An ABAQUS User Subroutine for a Modified Cohesive Zone Model that Regularizes Convergence... and A.F. Bower, Modelling Simul. Mater. Sci. Eng. 12, 453-463, 2004. ABAQUS allows the addition |
|||
|
Source: Gao, Yanfei - Department of Materials Science and Engineering, University of Tennessee |
|||
|
Collection: Materials Science |
|||
| 6 | journal of materials processing technology 1 9 7 ( 2 0 0 8 ) 408418 journal homepage: www.elsevier.com/locate/jmatprotec | ||
|
Summary: .elsevier.com/locate/jmatprotec Thermo-mechanical models of steel solidification based on two elastic visco-plastic constitutive laws... June 2007 Accepted 15 June 2007 Keywords: Thermo-mechanical processes Solidification and melting... thermo-mechanical models based on different elastic-visco-plastic constitutive laws are ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 7 | MANE 4240/ CIVL 4240: Introduction to Finite Elements Abaqus Handout | ||
|
Summary: MANE 4240/ CIVL 4240: Introduction to Finite Elements Abaqus Handout Professor Suvranu De... ..................................................................................................................................4 2. Abaqus SE Installation Instructions... ... |
|||
|
Source: De, Suvranu - Department of Mechanical, Aerospace and Nuclear Engineering, Rensselaer Polytechnic Institute |
|||
|
Collection: Engineering |
|||
| 8 | MANE 4240/ CIVL 4240: Introduction to Finite Elements Abaqus 6.9SE Handout | ||
|
Summary: MANE 4240/ CIVL 4240: Introduction to Finite Elements Abaqus 6.9SE Handout Professor Suvranu De... ..................................................................................................................................4 2. Abaqus SE Installation Instructions... ... |
|||
|
Source: De, Suvranu - Department of Mechanical, Aerospace and Nuclear Engineering, Rensselaer Polytechnic Institute |
|||
|
Collection: Engineering |
|||
| 9 | An ABAQUS User Material (UMAT) Subroutine for the Simulation of Deformation Behavior of Metallic Glasses Using the Free-Volume Model | ||
|
Summary: of an integration scheme of the governing constitutive law. More coding details can be found in ABAQUS Theory Manual... An ABAQUS User Material (UMAT) Subroutine for the Simulation of Deformation Behavior of Metallic... ," by Y.F. Gao, Modelling Simul. Mater. Sci. Eng. 14, 1329-1345, 2006. ABAQUS allows the ... |
|||
|
Source: Gao, Yanfei - Department of Materials Science and Engineering, University of Tennessee |
|||
|
Collection: Materials Science |
|||
| 10 | Delft university of technology Faculty of electrical engineering, mathematics and computer science | ||
|
Summary: Eulerian- Lagrangian method. The concerning FEA code Abaqus is provided by Simulia. The committee... concerned by GTC*L is Simulia's Abaqus. Besides the regular in house code, Abaqus is also used for tire... element code using a coupled Eulerian-Lagrangian method A ... |
|||
|
Source: Vuik, Kees - Delft Institute of Applied Mathematics, Elektrotechniek, Wiskunde en Informatica, Technische Universiteit Delft |
|||
|
Collection: Mathematics ; Computer Technologies and Information Sciences |
|||
| 11 | Chap. 27, Materials Processing Handbook-Cat # 3216, JR Groza; JF Shackelford; EJ Lavernia; MT Powers, eds. CRC Press, 2007 Solidification Macroprocesses (Modeling of stress, distortion and hot tearing) | ||
|
Summary: , the solidification stress analysis code, CON2D14 and the commercial code ABAQUS were applied for the conditions... and more interested in the coupled thermomechanical analysis. These developments have been motivated... . Manufacturers are then interested in the development of new numerical tools able to ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 12 | COUPLED VISCO-PLASTIC THERMO-MECHANICAL MODELS OF STEEL SOLIDIFICATION | ||
|
Summary: COUPLED VISCO-PLASTIC THERMO-MECHANICAL MODELS OF STEEL SOLIDIFICATION Seid Koric* , Lance C... @illinois.edu ABSTRACT: Coupled thermo-mechanical models based on highly nonlinear elastic visco-plastic constitutive... -plastic integration scheme [Koric 2006] is implemented into both implicit and explicit FE commercial software ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 13 | Copyright (to be inserted by the publisher ) Prevalent Material Parameters Governing Spalling | ||
|
Summary: , which is implemented in the finite element code ABAQUS, allows us to carry out simulations... , slag Impregnation (I), Thermomechanics (TM) and Phase transformations (P). The variation... allows us to propose a coupling diagram (Fig. 1) with three poles: namely, Thermomechanics (TM), slag |
|||
|
Source: Ecole Normale Supérieure de Cachan, Centre de mathématiques et de leurs applications |
|||
|
Collection: Mathematics |
|||
| 14 | Modelling of Anisotropic Viscoelastic Behaviour in Super-Pressure Balloons | ||
|
Summary: -defined subroutine in ABAQUS. For verification a set of cylindrical balloons is observed analytically... material model implemented through a user-defined material subroutine in the ABAQUS finite-element package... the creep/relaxation models available in ABAQUS. These were compared to a viscoelastic model that uses 2 |
|||
|
Source: Pellegrino, Sergio - Department of Engineering, University of Cambridge |
|||
|
Collection: Engineering |
|||
| 15 | ASM Handbook, Volume 15, Casting, Division 4: Modeling and Analysis of Casting Processes, American Society of Metals (2008) 449-461 | ||
|
Summary: codes, such as MARC[15] or ABAQUS[16] and with commercial solidification codes or special... ] and the commercial code ABAQUS were applied for typical conditions of steel casting.[21] Figure 2. One... related behaviors. The thermomechanical analysis of castings ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 16 | Findings for the 5 different sub-projects of this work are described as follows: Subproject 1) Simulation of fluid flow and pressure distribution in metal delivery system in single-roll | ||
|
Summary: . 3.2. The new Abaqus solidification models not only enable thermo-mechanically coupling, but also... numerical simulation using a new code on a GPU processing system. Because the pressure drop in the model... - stress code in order to efficiently simulate the coupled multiphysics of fluid flow, heat transfer |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 17 | RESIDUAL STRESS DISTRIBUTIONS FOR MULTI-PASS WELDS IN PRESSURE VESSEL AND PIPING COMPONENTS | ||
|
Summary: the commercial code ABAQUS. Axisymmetric analyses are performed for girth welds, while generalized plane strain... the software ABAQUS to simulate multiple pass welds. In their approach, after the completion of each pass... -dimensional (2-D) thermo-mechanical welding simulations are performed to determine ... |
|||
|
Source: Michaleris, Panagiotis - Department of Mechanical and Nuclear Engineering, Pennsylvania State University |
|||
|
Collection: Engineering |
|||
| 18 | L. Hibbeler et al., AISTech 2008, Pittsburgh, PA, May 5-8, 2008. Thermo-Mechanical Modeling of Beam Blank Casting | ||
|
Summary: L. Hibbeler et al., AISTech 2008, Pittsburgh, PA, May 5-8, 2008. 1 Thermo-Mechanical Modeling... (260) 625-8825 Key words: Beam Blank Continuous Casting, Finite Elements, ABAQUS, UMAT, Solidification... . The current study was undertaken to develop a thermo-mechanical model of the solidifying steel shell |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 19 | Modeling of Stress, Distortion, and Hot Tearing | ||
|
Summary: . For example, the solidification stress analysis code, CON2D (Ref 20) and the commercial code ABAQUS were... and these important related behaviors. The thermomechanical analysis of castings pre- sents a formidable challenge... thermomechanical behavior during solidification are on the ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 20 | Nordisk kernesikkerhedsforskning Norrnar kjarnryggisrannsknir | ||
|
Summary: simulations were performed with FEM code ABAQUS. With the fatigue test data treatment applica- tion one can e... . In addition to this numerical fatigue simulations were performed with FEM code ABAQUS. With the fatigue test... . In addition to this numerical fatigue simulations were performed with FEM ... |
|||
|
Source: Risø National Laboratory |
|||
|
Collection: Multidisciplinary Databases and Resources |
|||
| 21 | 3D THERMOMECHANICAL SIMULATION OF THE SECONDARY COOLING ZONE OF STEEL CONTINUOUS CASTING | ||
|
Summary: 3D THERMOMECHANICAL SIMULATION OF THE SECONDARY COOLING ZONE OF STEEL CONTINUOUS CASTING Frédéric... thermomechanical calculations. Figure 1: the non steady-state slice method Global non steady-state method... solving a transient thermomechanical problem and also to define the values used as initial values |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 22 | A Comparison of FEBio, ABAQUS, and NIKE3D Results for a Suite of Verification Problems | ||
|
Summary: analytical solutions or results from established FE codes, such as ABAQUS and NIKE3D. We chose to compare... the solutions from FEBio to those of ABAQUS and NIKE3D because ABAQUS is the most utilized FE code in the field... A Comparison of FEBio, ABAQUS, and NIKE3D ... |
|||
|
Source: Weiss, Jeffrey A. - Department of Bioengineering, University of Utah |
|||
|
Collection: Engineering |
|||
| 23 | Manufacturing and Performance Evaluation of Advanced Composites | ||
|
Summary: · Incorporated high temperature oxidation model in to FEA code · Develop a model(s) for thermomechanical... · DSC /DMA /TGA Modeling and Simulation: · Flow Simulation · Cure Modeling · Thermomechanical Analysis... Implemented in ABAQUS Flow Simulation for a Flat Panel #12;Experimental Bending of ... |
|||
|
Source: Ragsdell, Kenneth M. - Design Engineering Center, University of Missouri-Rolla |
|||
|
Collection: Engineering |
|||
| 24 | An Abaqus implementation of the extended finite element method | ||
|
Summary: -FEM in the finite ele- ment code Abaqus [5] for crack propagation simulations in fretting fatigue problems [6... the user subroutine UEL. Implementing the X-FEM in the commercial code Abaqus does imposes certain... a coupled thermo-mechanical analysis procedure *Coupled ... |
|||
|
Source: Sukumar, N. - Department of Civil and Environmental Engineering, University of California, Davis |
|||
|
Collection: Mathematics ; Engineering |
|||
| 25 | EUROSPF Conference HIGH-TEMPERATURE EXPERIMENTAL | ||
|
Summary: thermal history is modelled in the commercial, general- purpose, non-linear FE code, ABAQUS, using... are implemented within a transient, elastic-plastic-creep, thermo-mechanical analysis method for the die... to furnish stress-strain-temperature cyclic data for creep-fatigue life prediction. A simulative ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 26 | Reliability Analysis of Microelectronic Components and Materials | ||
|
Summary: , which, in our case, is the FE-code ABAQUS. · Non-standard analysis features, for example the assessment... of interfaces in general will lead to a local intensification of these thermo-mechanical stresses, the so... -lead solder is subjected to changes in temperature as well as to thermo-mechanical stresses ... |
|||
|
Source: Berlin,Technische Universität - Institut für Schiffs- und Meerestechnik, Fachgebiete Dynamik maritimer Systeme und Entwurf und Betrieb maritimer Systeme |
|||
|
Collection: Energy Storage, Conversion and Utilization |
|||
| 27 | Multiphysics Model of Metal Solidification on the Continuum Level Seid Korica | ||
|
Summary: using the ABAQUS user subroutine DLOAD. #12;7. Shell / Mold Interface Treatment Two-way thermo-mechanical... , 61801 Abstract Separate three-dimensional (3-D) models of thermo-mechanical behavior of the solidifying... ABAQUS (Dassault Corp., 2009) via its user defined material subroutine UMAT, including ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 28 | AMPERE 2011, Toulouse Modeling -372 An Iterative Routine for Macroscopic Modeling of | ||
|
Summary: of electromagnetic FDTD and thermo-mechanical FEM solvers (represented in our consideration by QW-3D and Abaqus... -difference time-domain algorithm for the analysis of electromagnetic wave propagation, and Abaqus, a finite... for the electromagnetic part and Abaqus for the thermal and mechanical parts. In ... |
|||
|
Source: Yakovlev, Vadim - Department of Mathematical Sciences, Worcester Polytechnic Institute |
|||
|
Collection: Mathematics |
|||
| 29 | Prediction of Welding Distortion Panagiotis Michaleris and Andrew DeBiccari | ||
|
Summary: of a fully three- dimensional model to perform the thermo-mechanical weld simulations of complex structures... three dimensional thermo-mechanical analyses. In general welding practice however, the parts are tack... thermo-mechanical welding simulations are performed to determine the residual stresses. The welding |
|||
|
Source: Michaleris, Panagiotis - Department of Mechanical and Nuclear Engineering, Pennsylvania State University |
|||
|
Collection: Engineering |
|||
| 30 | Journal of the Mechanics and Physics of Solids 56 (2008) 20742091 The resistance of metallic plates to localized impulse | ||
|
Summary: using the dynamic system mechanics analysis simulation (DYSMAS) code, followed by ABAQUS... of the responses of the panel and of the water by using the commercial finite element code ABAQUS... using the code DYSMAS (Dharmasena et al., 2007a; Wei et al., 2007a, b). A similar ... |
|||
|
Source: Wadley, Haydn - Intelligent Processing of Materials Laboratory & Department of Materials Science and Engineering, University of Virginia |
|||
|
Collection: Materials Science |
|||
| 31 | Thermal And Thermo-Mechanical Modelling of Polymer Overmoulded Electronics | ||
|
Summary: Thermal And Thermo-Mechanical Modelling of Polymer Overmoulded Electronics F. Sarvar1 , D. C... the thermo-mechanical behaviour of overmoulded printed circuit boards. 2. INTRODUCTION The encapsulation... .J. Palmer Thermal and Thermo-Mechanical Modelling of Polymer Overmoulded Electronics carried out |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 32 | Viscoelastic Behaviour of Pumpkin Balloons T. Gerngross, Y. Xu and S. Pellegrino | ||
|
Summary: of ULDB balloons with the finite element software ABAQUS. First, the standard viscoelastic modelling... capabilities available in ABAQUS are examined, but are found of limited accuracy even for the case of simple... . This paper uses a User-Defined Material (UMAT) subroutine in the commer- cial finite-element software ABAQUS |
|||
|
Source: Pellegrino, Sergio - Department of Engineering, University of Cambridge |
|||
|
Collection: Engineering |
|||
| 33 | MODELING AND EXPERIMENTS OF THE HYSTERETIC RESPONSE OF AN ACTIVE HYDROFOIL ACTUATED BY SMA | ||
|
Summary: a thermomechanical constitutive model for SMA coupled with a CFD code to model the hydrodynamic load. FEA has been... program ABAQUS. Using this constitutive model and ABAQUS, it is possible to model fully coupled... thermomechanical problems or the mechanical response to a specified ... |
|||
|
Source: Texas A&M University, Department of Aerospace Engineering, Shape Memory Alloy Research Team |
|||
|
Collection: Engineering ; Materials Science |
|||
| 34 | INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING Int. J. Numer. Meth. Engng 2005; 64:877906 | ||
|
Summary: and a parallelization of the code. ¶Note that more complex formulations involving dynamical loading and inhomogeneous... reported in the table have been generated with our code (that will be detailed later) considering a square... capabilities of the method. Therefore, a general-purpose Fortran 90 code for two-dimensional ... |
|||
|
Source: Bigoni, Davide - Dipartimento di Ingegneria Meccanica e Strutturale, Università di Trento; NONE |
|||
|
Collection: Engineering ; Materials Science |
|||
| 35 | Modeling and Simulation of Wrinkling in Compression Molding Process of Fiber Reinforced Composites1 | ||
|
Summary: of the mold against the part. There are a number commercial codes for the simulation of compression molding... process of fiber-reinforced thermosets [1], [2]. These finite element based codes predict the mold filing... of the existing codes attempt to predict micromechanical failure mode in the form of wrinkle, which often ... |
|||
|
Source: Fish, Jacob - Departments of Civil and Environmental Engineering & Department of Mechanical, Aerospace and Nuclear Engineering, Rensselaer Polytechnic Institute |
|||
|
Collection: Engineering |
|||
| 36 | Using Abaqus on Barossa Step by Step User Guide | ||
|
Summary: Using Abaqus on Barossa Step by Step User Guide By Wei-Liang Wu ac3 Technical Support Officer... of codes porting existing codes to run on the supercomputer · User level support Advice and... abaqus · Transfer input files into barossa (menangle.inp) · Small job abaqus ... |
|||
|
Source: Marchant, Tim - School of Mathematics and Applied Statistics, University of Wollongong |
|||
|
Collection: Mathematics |
|||
| 37 | Comparison between computed and measured fibre orientation in injection moulded parts | ||
|
Summary: tools used were MOLDFLOW MPI® (3D module) and REM 3D® for injection moulding simulations and ABAQUS... the thermo-mechanical requirements for the used materials increase, the development cycles decrease... . The importance of accurate fibre orientation on subsequent thermo-mechanical analysis is stressed by comparing |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 38 | 10e Colloque National en Calcul des Structures 9-13 Mai 2011, Presqu'le de Giens (Var) | ||
|
Summary: 'un schéma temporel différent dans Abaqus (theta méthode) et dans le code LATIN (Galerkin discontinu d... 'ordre 1). Abaqus ainsi que le code recherche développé au LMT pour la LATIN donnent des temps de calcul... conduisent à une déformation totale maximale de 0.5%. 3.2.2 Comparaison avec ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 39 | Design and Implementation of a Shape Memory Alloy Actuated Reconfigurable Airfoil | ||
|
Summary: thermomechanical analysis environment [35,36,37]. The achieved actuation strain of the SMA depends... of the wing will in turn affect the shape of the pressure distribution. Thus, the coupled thermomechanical... computed using ABAQUS, a commercial finite element method software package, utilizing user material |
|||
|
Source: Texas A&M University, Department of Aerospace Engineering, Shape Memory Alloy Research Team |
|||
|
Collection: Engineering ; Materials Science |
|||
| 40 | SACHEEN BEKAH 1400 Avenue des Pins Ouest ~ Montreal, Quebec H3G 1B1 | ||
|
Summary: with technique that conducts CAE-based coupled thermo-mechanical analysis to reduce welding-induced thermal... -linear analyses in implicit and explicit code solvers. · Mastered technique of mathematical modeling... family, LS-DYNA, ABAQUS. Program in FORTRAN and MATLAB. KIRCHHOFF AUTOMOTIVE GRUPPE GmbH, Attendorn |
|||
|
Source: Barthelat, Francois - Department of Mechanical Engineering, McGill University |
|||
|
Collection: Engineering |
|||
| 41 | A Unified Thermodynamic Constitutive Model for SMA and Finite Element Analysis of Active Metal Matrix Composites | ||
|
Summary: to analyze the thermomechanical response of an active metal matrix composite with embedded SMA fibers. Both... to the composite. Therefore, accurate modeling of the thermomechanical response of SMA under complex loading paths... is necessary. Extensive work has been done on the thermomechanical constitutive modeling of SMA ... |
|||
|
Source: Texas A&M University, Department of Aerospace Engineering, Shape Memory Alloy Research Team |
|||
|
Collection: Engineering ; Materials Science |
|||
| 42 | 2007 ABAQUS Users' Conference 1 Implementing a gradient dependent plasticity model | ||
|
Summary: code ABAQUS. In the finite element implementation, both the nodal displacement increments n i... 2007 ABAQUS Users' Conference 1 Implementing a gradient dependent plasticity model in ABAQUS Lars... the user element subroutine interface in ABAQUS. Based on the implementation, a simple ... |
|||
|
Source: Risø National Laboratory |
|||
|
Collection: Multidisciplinary Databases and Resources |
|||
| 43 | Proceedings of the SAMPE Conference, Baltimore, MD, June 3-7, 2007 THERMOMECHANICALANALYSIS OF COMPOSITE | ||
|
Summary: in commercial finite element code ABAQUS, using user subroutines. A laminated shell theory [12, 13] accounting... not account for complexities like thermo-mechanical behavior and highly orthotropic nature of the material... and combined thermo-mechanical loads [9, 10]. In the present study, a ... |
|||
|
Source: Ragsdell, Kenneth M. - Design Engineering Center, University of Missouri-Rolla |
|||
|
Collection: Engineering |
|||
| 44 | Proceedings of the 12th Conference of the European Ceramic Society ECerS XII | ||
|
Summary: .3O3-. The implementation of the model in the F.E.A code Abaqus allows the exploration... studied4,5,6,7 . Finally, the current numerical implementation of the model in the F.E.A code Abaqus... for the chermical strain (4) has been implemented in the finite element code ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 45 | Simulation of Heat Treatment Distortion R.A. Hardin1 | ||
|
Summary: stress. Fletcher [1] also provides an overview of thermo-mechanical material properties dependent... in the model results presented in this paper. The constitutive behavior of the steel thermo-mechanical material... transfer with stress and displacement (ABAQUS, ANSYS, NASTRAN, ALGOR, and many others). These programs do |
|||
|
Source: Beckermann, Christoph - Department of Mechanical and Industrial Engineering, University of Iowa |
|||
|
Collection: Materials Science |
|||
| 46 | 238 Int. J. Machining and Machinability of Materials, Vol. 3, No. 3, 2008 Copyright 2008 Inderscience Enterprises Ltd. | ||
|
Summary: has been developed under the general purpose FEA software Abaqus/Explicit© (v6.6-1). Figure 3 shows... . Firstly, after an Abaqus Explicit step is finished, the model is imported into Abaqus Standard. Once... in Abaqus Standard, in order to interpolate the solution onto the new mesh from the output databases |
|||
|
Source: Ozel, Tugrul - Department of Industrial Engineering, Rutgers University |
|||
|
Collection: Engineering |
|||
| 47 | Smart Mater. Struct. 9 (2000) 701710. Printed in the UK PII: S0964-1726(00)14319-8 In situ displacement measurements | ||
|
Summary: -dependent thermomechanical boundary value problem. The commercial nonlinear finite-element code ABAQUS was used... simulation of the embedded ribbon was carried out using a fully-coupled thermomechanical SMA constitutive... , 1301 Algonquin Road, Schaumburg, IL 60196, USA. Current address: Multifunctional ... |
|||
|
Source: Sottos, Nancy R. - Department of Theoretical and Applied Mechanics, University of Illinois at Urbana-Champaign |
|||
|
Collection: Engineering |
|||
| 48 | Finite element modelling of a rotating piezoelectric ultrasonic motor A. Frangi a,*, A. Corigliano a | ||
|
Summary: the potential- ities of the commercial FE code ABAQUS/Explicit [14] for the solution of contact problems... been performed with the FE code ABAQUS Explicit [19] which is opti- mized for highly non... methods (FEM) are generally employed. For example Maeno et al. [17] utilize the commercial ... |
|||
|
Source: Corigliano, Alberto - Dipartimento di Ingegneria Strutturale, Politecnico di Milano; Frangi, Attilio - Dipartimento di Ingegneria Strutturale, Politecnico di Milano |
|||
|
Collection: Engineering |
|||
| 49 | Reliability of Nano-Structured Nickel Interconnections Replacing FlipChip Solder Assembly without Underfill | ||
|
Summary: microns [ 2 - 3 ]. Traditional solder interconnections may not satisfy the thermo-mechanical... -8]. The copper bump enables easier processing, minimizes the thermo-mechanical concerns, distributes the current... that are compatible with organic substrates. 2. Compare the thermomechanical reliability of the nanometal |
|||
|
Source: Swaminathan, Madhavan - School of Electrical and Computer Engineering, Georgia Institute of Technology |
|||
|
Collection: Engineering |
|||
| 50 | UNCORRECTEDPROOF 2 A sand surface element for ecient modeling of residual stress | ||
|
Summary: simulations. 42 The surface element is implemented in ABAQUSe using the user element function (UEL). The 43... in ABAQUSe, and the reader is referred to the 93 theory manual for ABAQUSe for full details [8]. The MCC... the yield surface changes 99 the yield surface size, and is in the plastic regime. We note that ... |
|||
|
Source: Dantzig, Jonathan A. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Engineering |
|||
| 51 | Running ABAQUS 6.9 Arul M Britto | ||
|
Summary: Running ABAQUS 6.9 Arul M Britto May 7, 2010 Contents 1 Introduction 2 1.1 Manuals... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1.1 ABAQUS/Standard and Explicit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... |
|||
|
Source: Talbot, James P. - Department of Engineering, University of Cambridge; Travis, Adrian - Department of Engineering, University of Cambridge |
|||
|
Collection: Engineering |
|||
| 52 | COST 526 Project CH4 Final Report | ||
|
Summary: as the residual stresses are predicted using ABAQUS® 6.5. This commercial simulation package allows performing... the wheel and liquid are neglected. FE Modelling using ABAQUS Computing the cooling rates and residual... boundary condition in ABAQUS). The surfaces of the FE mesh are shown in Figure 7. Four different surfaces |
|||
|
Source: Fachhochschule Nordwestschweiz, Hochschule für Technik, Institut für Thermo- und Fluid-Engineering |
|||
|
Collection: Engineering |
|||
| 53 | Introduction ABAQUS/Standard | ||
|
Summary: Running ABAQUS 6.4 ArulM Britto October 7, 2005 Contents 1 Introduction 3 1.1 Manuals... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1.1 ABAQUS/Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1... .1.2 ABAQUS/Explicit . . . . . . . . . . . . . . . ... |
|||
|
Source: Talbot, James P. - Department of Engineering, University of Cambridge; Travis, Adrian - Department of Engineering, University of Cambridge |
|||
|
Collection: Engineering |
|||
| 54 | The rs-method for material failure simulations R. Fan and J. Fish | ||
|
Summary: Lagrangian codes, such as LS-DYNA and ABAQUS employ the erosion element algorithm, where element deletion... reduced order s-method), has been integrated in ABAQUS and verified on several test problems. Keywords... of these technologies has been rather slow. Notable exceptions are fracture codes based on ... |
|||
|
Source: Fish, Jacob - Departments of Civil and Environmental Engineering & Department of Mechanical, Aerospace and Nuclear Engineering, Rensselaer Polytechnic Institute |
|||
|
Collection: Engineering |
|||
| 55 | Introduction ABAQUS/Standard | ||
|
Summary: Running ABAQUS 6.9 ArulM Britto May 7, 2010 Contents 1 Introduction 2 1.1 Manuals... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1.1 ABAQUS/Standard and Explicit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... |
|||
|
Source: Talbot, James P. - Department of Engineering, University of Cambridge; Travis, Adrian - Department of Engineering, University of Cambridge |
|||
|
Collection: Engineering |
|||
| 56 | j PHI'SWFRANCE 7 (1 997) Colloque C3, Supplement au Journal de Physique I11 d'aoQt 1997 | ||
|
Summary: . he codes used were LS-Dyna, [6]with the "Winfrith-model", [7]and ABAQUS Explicit, [8... . 6 ACKNOWLEDGMENTS To Dr. Jan Hernelind FemTech AB, who ran the AbaqusExplicit code, to my friend M... on beams of different sizes with and without fibres, form the basis of experimental results. The ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 57 | Available at www.sciencedirect.com journal homepage: www.elsevier.com/locate/he | ||
|
Summary: of mechanical failure. These sub-models are implemented in ABAQUS commercial finite element code using user... and implemented in commercial finite element code ABAQUS, using user subroutines. A typical high pressure hydrogen... extreme thermo-mechanical loadings. A heat transfer ... |
|||
|
Source: Ragsdell, Kenneth M. - Design Engineering Center, University of Missouri-Rolla |
|||
|
Collection: Engineering |
|||
| 58 | European Journal of Mechanics A/Solids 25 (2006) 215229 The response of clamped sandwich plates with lattice cores | ||
|
Summary: code ABAQUS1 (version 6.4). Three-dimensional simulations of a quarter model of the sandwich plates... contact" option in ABAQUS was employed to simulate contact between all possible surfaces including (i... and wedge elements (C3D8R and C3D6, respectively in ABAQUS notation) with the elements swept about |
|||
|
Source: Fleck, Norman A. - Mechanics, Materials and Design Division, Department of Engineering, University of Cambridge |
|||
|
Collection: Engineering ; Materials Science |
|||
| 59 | X. Richard Zhang Xianfan Xu1 | ||
|
Summary: , and displacement distributions. The finite element code, ABAQUS HKS, Inc., Pawtucket, RI is used. As shown in Fig... and thermomechanical phenomena during pulsed laser induced melting and solidification. The essential elements... thermal and thermomechanical prob- lems involved in laser bending, 912 . ... |
|||
|
Source: Xu, Xianfan - School of Mechanical Engineering, Purdue University |
|||
|
Collection: Engineering ; Materials Science |
|||
| 60 | Material System Thermomechanics Interactions (cont'd) International Collaboration: Role / Impact / Recognition | ||
|
Summary: Material System Thermomechanics Interactions (cont'd) · International Collaboration: Role / Impact... is providing funds to the US under JUPITER-II (starting April 2001) for joint research on thermomechanic... C thermomechanics and behavior in fusion environments · JUPITER- II involves many Japanese Universities and several |
|||
|
Source: Abdou, Mohamed - Fusion Science and Technology Center, University of California at Los Angeles |
|||
|
Collection: Plasma Physics and Fusion |
|||
| 61 | Modelling of a coke oven heating wall M. Landreau, D. Isler, Centre de Pyrolyse de Marienau (CPM) | ||
|
Summary: with thermomechanical modelling of a coke oven heating wall. The objective is to define the safe limits of coke oven... stresses. For this purpose a 3D thermomechanical model of a heating wall taking into account the assembly... in compression; · brick and joint material behaviours: refractory materials have specific ... |
|||
|
Source: Paris-Sud XI, Université de - Institut d'Optique, Laboratoire Charles-Fabry, Groupe d'Optique Atomique |
|||
|
Collection: Physics |
|||
| 62 | Micromechanical Modelling of Unidirectional Long Fiber Reinforced | ||
|
Summary: /PATRAN for Windows (www.mscsoftware.com) FE Solver ABAQUS (www.abaqus.com) Own program codes: Program Code "Meso3... -R-1672(EN) 7 preferences), you change "Analysis code" from Nastran to Abaqus (see Figure 5). Then, you... . In new window of MSC-PATRAN (Model ... |
|||
|
Source: Risø National Laboratory |
|||
|
Collection: Multidisciplinary Databases and Resources |
|||
| 63 | To appear J. of Intell. Mat. Sys. and Struc., Vol. 9 (1998) c Technomic Publishing Co., Inc. | ||
|
Summary: with the commercial nonlinear finite element code ABAQUS supplemented by a user supplied constitutive subroutine... . The thermomechanical model accurately predicted the stress contours throughout the experiment. Keywords: Shape memory... the history depen- dent thermomechanical boundary value problem. The ... |
|||
|
Source: Texas A&M University, Department of Aerospace Engineering, Shape Memory Alloy Research Team |
|||
|
Collection: Engineering ; Materials Science |
|||
| 64 | J. of Intell. Mat. Sys. and Struc., Vol. 9, No. 5 pp. 379-390 (1998) c Technomic Publishing Co., Inc. | ||
|
Summary: with the commercial nonlinear finite element code ABAQUS supplemented by a user supplied constitutive subroutine... . The thermomechanical model accurately predicted the stress contours throughout the experiment. Keywords: Shape memory... the history depen- dent thermomechanical boundary value problem. The ... |
|||
|
Source: Sottos, Nancy R. - Department of Theoretical and Applied Mechanics, University of Illinois at Urbana-Champaign |
|||
|
Collection: Engineering |
|||
| 65 | Latest Evolution in Blast Furnace Hearth thermo-Mechanical Stress Modelling Jrme BRULIN, Frdric ROULET (1) | ||
|
Summary: 1 Latest Evolution in Blast Furnace Hearth thermo-Mechanical Stress Modelling Jérôme BRULIN... subject to highest Thermo-Mechanical stresses. There is clear interest in being able to estimate... the thermo-mechanical stresses experienced between different designs. Thanks to FEM tools, SG has a means |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 66 | Modelling of joint effect in refractory structures BLOND Eric1 | ||
|
Summary: temperatures, the F.E.M. Code ABAQUS has been coupled with a Fortran routine. Bi-axial compression... ] is not actually possible in such computational codes. In the macro-modelling alternative approach, all the masonry... of the Cosserat's kinematics is a great handicap for the development of new numerical ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 67 | The continuous casting of thin aluminum strip with a single-wheel melt spinning process offers great potential for low-cost production of finished products with unique surface textures. To perfect this | ||
|
Summary: involved development of user-defined subroutines to enable the commercial code ABAQUS to simulate realistic... in-house code. As part of the current work, we have developed a method to implement this method... into the commercial package, ABAQUS, using a user-defined subroutine to incorporate the superheat ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 68 | JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES Vol. 2, No. 10, 2007 | ||
|
Summary: calculations of the shear-out tests were performed using the finite element code ABAQUS Explicit 6... with reduced integration and hourglass section control (CAX4R in [ABAQUS 2005]). A typical mesh in the plate... yields a high-quality mesh even when severe deformation occurs [ABAQUS 2005]. Comparisons with ... |
|||
|
Source: Hutchinson, John W. - School of Engineering and Applied Sciences, Harvard University |
|||
|
Collection: Engineering |
|||
| 69 | Materials Research Team, Advanced Technology Center, | ||
|
Summary: as opposed to costly and lengthy experimental trial and errors and/or fully coupled thermo-mechanical simula... configuration as opposed to lengthy and costly fully coupled thermomechanical simulations. Applicability... . Fully coupled thermomechanical analysis was used for the verifications of the FE models. In the first |
|||
|
Source: Koç, Muammer - Department of Mechanical Engineering, Virginia Commonwealth University |
|||
|
Collection: Materials Science ; Engineering |
|||
| 70 | Author's personal copy International Journal of Mechanical Sciences 50 (2008) 405421 | ||
|
Summary: slightly refined herein) is implemented into the commercial FE code Abaqus/explicit as a VUMAT user... FE code Abaqus/Explicit. In Section 3, we verify our FE implementation by refining the numerical... implemented in the explicit commercial code Abaqus/Explicit. ... |
|||
|
Source: Yosibash, Zohar - Department of Mechanical Engineering, Ben-Gurion University |
|||
|
Collection: Engineering |
|||
| 71 | Optimization and Control of Aluminum Nitride Crystal Growth W Gressick*, D Littlewood*, A Manniatty*, K Morgan, S Mueller, S Salon*, L Schowalter, J Wason*, J Wen* | ||
|
Summary: ) improved thermal control for better crystal quality · Use thermo-mechanical crystal models to predict... conditions for optimal growth Thermo-Mechanical Model Stress prediction due to temperature field Predict... temperature- dependent and anisotropic behavior Thermo-Mechanical Modeling · Goals: Model stress state in Al |
|||
|
Source: Salama, Khaled - Department of Electrical, Computer and Systems Engineering, Rensselaer Polytechnic Institute |
|||
|
Collection: Engineering |
|||
| 72 | Modeling of Hot Tearing and Other Defects in Casting Processes | ||
|
Summary: , such as MARC (Ref 50) or ABAQUS (Ref 51), and with commercial solidification codes or special-purpose software... ) and the commer- cial code ABAQUS (Ref 51) were applied for typ- ical conditions of steel casting (Ref 56... calibration and validation with experimental measurements and is a critical step in ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 73 | Miniature Specimen Testing The Small Punch Test (SPT) has successfully been used in the US and in Japan | ||
|
Summary: the SMT package is critically affected under the combined action of advanced temperatures and thermo-mechanical... on a workstation by means of the finite element program ABAQUS. An axi-symmetric model with four-node elements |
|||
|
Source: Berlin,Technische Universität - Institut für Schiffs- und Meerestechnik, Fachgebiete Dynamik maritimer Systeme und Entwurf und Betrieb maritimer Systeme |
|||
|
Collection: Energy Storage, Conversion and Utilization |
|||
| 74 | JOURNALDE PHYSIQUE IV ColloqueC6,supplCmentau Journal de Physique 111,Volume 6, octobre 1996 | ||
|
Summary: of Thermomechanical Loading on Near Tip Constraint N.P. O'Dowd and J.D.G. Sumpter* Department of Mechanical... -plastic behaviour a finite element analysis of the full thermo-mechanical cycle must be carried out to predict... stress and strain fields. Numerous schemes for estimating J under thermo-mechanical loading have been |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 75 | Towards Realization of Computational Homogenization in Practice1 | ||
|
Summary: for user-defined subroutines, Python script and input files for use with ABAQUS code. 2. Linear... solid mechanics problems, which is fully compatible with conventional finite element code architecture... . A seamless implementation in ABAQUS is presented including Python script, validation problems and a web |
|||
|
Source: Fish, Jacob - Departments of Civil and Environmental Engineering & Department of Mechanical, Aerospace and Nuclear Engineering, Rensselaer Polytechnic Institute |
|||
|
Collection: Engineering |
|||
| 76 | INSTITUTE OF PHYSICS PUBLISHING MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING Modelling Simul. Mater. Sci. Eng. 14 (2006) 13291345 doi:10.1088/0965-0393/14/8/004 | ||
|
Summary: the commercial finite element code ABAQUS [17] to implement the flow chart in figure 1. For the Newton... Raphson iterations to solve (9), the time step is controlled by the ABAQUS automatic incrementation technique. From... specifies the procedure for the ABAQUS UMAT subroutine, in which the increments of ... |
|||
|
Source: Gao, Yanfei - Department of Materials Science and Engineering, University of Tennessee |
|||
|
Collection: Materials Science |
|||
| 77 | Tribology International 39 (2006) 16641673 Consequence of contact local kinematics of sliding bodies on the surface | ||
|
Summary: surface. The study presented in this section was performed on a simple model. The thermo-mechanical code... involved during sliding with friction. The explicit dynamic finite element code PlastD in 2D is used... two parts describe the principles of the 2D explicit dynamic finite element code PlastD from |
|||
|
Source: Baillet, Laurent - Laboratoire de Géophysique Interne et Tectonophysique, Observatoire de Grenoble, Université Joseph Fourier |
|||
|
Collection: Geosciences |
|||
| 78 | INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING Int. J. Numer. Meth. Engng. 2000; 47:11231168 | ||
|
Summary: :11231168 Numerical implementation of a shape memory alloy thermomechanical constitutive model using return mapping... . In this paper, a comprehensive study on the numerical implementation of SMA thermomechanical constitutive... and the inversion of the algorithmic tangent tensor. A uniÿed thermomechanical constitutive model, ... |
|||
|
Source: Texas A&M University, Department of Aerospace Engineering, Shape Memory Alloy Research Team |
|||
|
Collection: Engineering ; Materials Science |
|||
| 79 | Materials and Design 24 (2003) 6978 0261-3069/03/$ -see front matter 2002 Elsevier Science Ltd. All rights reserved. | ||
|
Summary: by combining finite-element method based thermo-mechanical calculations with the Weibull statistical structural... using the following two computer codes: (a) the XKTC one-dimensional internal ballistic code w7x which... -shot firing event and; (b) the XBR2D code w8 11x which enables the calculation of the ... |
|||
|
Source: Grujicic, Mica - Department of Mechanical Engineering, Clemson University |
|||
|
Collection: Engineering ; Energy Storage, Conversion and Utilization |
|||
| 80 | Proceedings of the 12th Conference of the European Ceramic Society ECerS XII | ||
|
Summary: results obtained with the model implemented in a F.E.M code are shown. They prove the ability of the model... thermochemistry and thermomechanics. The observed degradations of silicon-carbide-based refractories used in waste... in the software ABAQUS thanks to a UMATHT subroutine. To do this, equations have been re-written in ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 81 | ORIGINAL ARTICLE Finite element modeling the influence of edge roundness | ||
|
Summary: :255267 257 #12;In this paper, a commercial software code, ABAQUS/ Explicit v6.4, and an explicit dynamic ALE... hand, the friction in metal cutting plays an important role in the thermo-mechanical chip flow... model. A thermo-mechanical FEM simulation scheme is created by including tool and workpiece ... |
|||
|
Source: Ozel, Tugrul - Department of Industrial Engineering, Rutgers University |
|||
|
Collection: Engineering |
|||
| 82 | SURVIVAL AND RELIABILITY ASSESSMENT OF CHAMBER STRUCTURAL MATERIALS FOR HIGH | ||
|
Summary: , by computer simulations and experiments, the thermo-mechanical response of the structure to deposited energy... of the chamber structure will depend on its thermo-mechanical response to the aggressive environment imposed... properties. We propose to develop Multiscale Hierarchical Computational Methods (MHCM) for the ... |
|||
|
Source: Ghoniem, Nasr M. - Department of Materials Science and Engineering, University of California at Los Angeles |
|||
|
Collection: Materials Science |
|||
| 83 | In this paper, we argue that the deployment of high performance wide area networks coupled with the availability of commodity | ||
|
Summary: , it would be difficult to understand why commercial codes like ANSYS [20] or ABAQUS [21] exist as sequential... codes only.) An Alternative Approach Using RDBMS We have implemented a coupled thermo-mechanical... a software testbed in which each of our codes would compile and run. ... |
|||
|
Source: Pingali, Keshav K. - Department of Computer Sciences, University of Texas at Austin; Stodghill, Paul - Department of Computer Science, Cornell University |
|||
|
Collection: Computer Technologies and Information Sciences |
|||
| 84 | PublishedbyManeyPublishing(c)IOMCommunicationsLtd ORIGINAL RESEARCH PAPER | ||
|
Summary: /or pressure dependent. In contrast, the existing version of ABAQUS/Standard code28 is limited in this respect... . This modelling approach does not account for the effects of thermomechanical coupling. The additional mechanical... elements (CAX4R) in ABAQUS/Explicit.22 The model was made up of a total of ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Composites and Coatings Group |
|||
|
Collection: Materials Science |
|||
| 85 | Micromechanics applied to the thermal shock behavior of refractory ceramics | ||
|
Summary: in the finite element code ABAQUS to provide an assistance to the design of structures subjected to thermome... element computations are carried out with the finite element code Abaqus 5.8 (Hibbitt et al., 1999). Fig... with experimental data. Second, a micro- thermomechanical analysis ... |
|||
|
Source: Ecole Normale Supérieure de Cachan, Centre de mathématiques et de leurs applications |
|||
|
Collection: Mathematics |
|||
| 86 | Comptes Rendus des JNC 17 -Poitiers 2011 OSIRHYS IV Qualification des codes pour la prdiction du comportement | ||
|
Summary: Comptes Rendus des JNC 17 - Poitiers 2011 1 OSIRHYS IV Qualification des codes pour la prédiction... de l'hydrogène OSIRHYS IV, Code Qualification for 700 bar On-board Composite Pressure Vessel... et (b) étapes de qualification des codes. 2.2 Limitations de la simulation Les limitations actuelles |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 87 | Fusion Engineering and Design 85 (2010) 16811688 Contents lists available at ScienceDirect | ||
|
Summary: technique that is capable of integrating multi-disciplinary computational codes while appropriately treating... analysis to the thermo-fluid MHD analysis code for magnetohydrodynamic (MHD) velocity profile assessments... is complex. Understanding and predicting its performance requires many specialized computational codes |
|||
|
Source: Abdou, Mohamed - Fusion Science and Technology Center, University of California at Los Angeles |
|||
|
Collection: Plasma Physics and Fusion |
|||
| 88 | UNCORRECTEDPROOF PROTEC 11307 118 | ||
|
Summary: are then imported into Abaqus and a 343 static thermo-mechanical analysis is carried out in order to: 344 (a... -cooling analyses (associated with139 the DA-PMH fabrication process) with a part post-ejection140 thermo-mechanical... of a dual-phase steel with the 186 following thermo-mechanical properties: ... |
|||
|
Source: Grujicic, Mica - Department of Mechanical Engineering, Clemson University |
|||
|
Collection: Engineering ; Energy Storage, Conversion and Utilization |
|||
| 89 | EUROSPF Conference Carcassonne, France from 3-5 September 2008 1 | ||
|
Summary: the complete thermo-mechanical calculation in order to assess accurate stress levels, or plastic strain... ) and ceramic (b) tools The heat transfer analysis is performed with ABAQUS software. It combines conduction... to reproduce the thermo-mechanical loading of SPF dies, it is quite necessary to well assess the thermal |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 90 | CHAMBER TECHNOLOGY FY 02 / 03 / 04 | ||
|
Summary: Technology · APEX · JUPITER-II Thermofluid · Pebble Bed Thermomechanics and JUPITER-II SiC Material System... Thermomechanics (involves 12 U.S. institutions) (Collaborative Program with Japan) (Collaborative Program with IEA... ) in complex closed geometries and in the presence of magnetic fields. Pebble Bed Thermomechanics ... |
|||
|
Source: Abdou, Mohamed - Fusion Science and Technology Center, University of California at Los Angeles |
|||
|
Collection: Plasma Physics and Fusion |
|||
| 91 | THERMO-MECHANICAL SIMULATIONS OF DUCTILE FAILURE BY MESHFREE METHOD | ||
|
Summary: THERMO-MECHANICAL SIMULATIONS OF DUCTILE FAILURE BY MESHFREE METHOD Dr. Akhilesh Jha Lead Engineer... (ASB), spall fracture, and crack. Since this type of thermo-mechanical phenomena involves large... Mail Code 1308 San Diego, CA 92182 Phone: 619 594 6074 Fax: 619 594 0933 http://aerospace.sdsu.edu #12; |
|||
|
Source: Ponce, V. Miguel - Department of Civil and Environmental Engineering, San Diego State University |
|||
|
Collection: Engineering |
|||
| 92 | Int. J. Machining and Machinability of Materials, Vol. 2, Nos. 3/4, 2007 451 Copyright 2007 Inderscience Enterprises Ltd. | ||
|
Summary: , a commercial software code, ABAQUS/Explicit v6.4 and explicit dynamic ALE modelling approach is used to conduct... machining in this paper. Friction in meso-scale machining plays an important role in thermo-mechanical... -scale machining are: 1 the work material model should satisfactorily represent elastic plastic and ... |
|||
|
Source: Ozel, Tugrul - Department of Industrial Engineering, Rutgers University |
|||
|
Collection: Engineering |
|||
| 93 | OutboardInboard OutboardInboard | ||
|
Summary: 1 - Hin=2 mm 1 2 3 "Center Stack +Inboard Divertor", 2.5-D model ·Flow3D code was extended... to include MHD effects (Flow3D-M) ·New 2.5-D model and computer code were developed to calculate MHD free... Thermomechanics Interactions Modeling and Experiments #12;Material System Thermomechanics Interactions ... |
|||
|
Source: Abdou, Mohamed - Fusion Science and Technology Center, University of California at Los Angeles |
|||
|
Collection: Plasma Physics and Fusion |
|||
| 94 | Nordisk kernesikkerhedsforskning Norrnar kjarnryggisrannsknir | ||
|
Summary: element method (FEM) based analysis code ABAQUS, the test data, i.e. stress- strain curves, have... . A description of this code is given also in this report. Input data for ABAQUS was obtained to describe both... of the material for analysis with finite element method (FEM) based analysis ... |
|||
|
Source: Risø National Laboratory |
|||
|
Collection: Multidisciplinary Databases and Resources |
|||
| 95 | Accepted Manuscript Numerical Characterization of Thermo-mechanical Performance of Breeder | ||
|
Summary: Accepted Manuscript Numerical Characterization of Thermo-mechanical Performance of Breeder Pebble... , M. Abdou, Numerical Characterization of Thermo-mechanical Performance of Breeder Pebble Beds... of Thermo-mechanical Performance of Breeder Pebble Beds Authors: Zhiyong An* , Alice Y. Ying, Mohamed Abdou |
|||
|
Source: Abdou, Mohamed - Fusion Science and Technology Center, University of California at Los Angeles |
|||
|
Collection: Plasma Physics and Fusion |
|||
| 96 | Fusion Engineering and Design 46 (1999) 177183 ITER reference breeding blanket design | ||
|
Summary: -element-method (FEM) based codes (i.e. ABAQUS, ANSYS, CASTEM and STAR-CD) confirmed that the prescribed temperature... ) and module c11 (the most curved one) have been performed in 3-D geometry with ABAQUS and ANSYS codes... -D FEM electromagnetic analyses have been carried out by means of EMAS ... |
|||
|
Source: Raffray, A. René - Center for Energy Research, University of California at San Diego |
|||
|
Collection: Plasma Physics and Fusion |
|||
| 97 | Comptes Rendus des JNC 17 -Poitiers 2011 Modlisation thermomcanique d'prouvettes polymre/composite | ||
|
Summary: /composite représentatives des réservoirs haute pression à hydrogène Thermo-mechanical modeling of polymer... to a thermo-mechanical loading. Mechanical and thermal behaviour laws are determined from mechanical tests... the importance of thermo-mechanical modelling to simulate the tank behaviour. A ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 98 | Colloque National en Calcul des Structures 9-13 mai 2011, Presqu'le de Giens (Var) | ||
|
Summary: obtenus par le code ABAQUS® /Explicit montre que l'API donne une bonne estimation des déformations et des... convergence. 7 Résultats numériques : forgeage d'un disque de turbine Le code ABAQUS ® /Explicit est utilisé... deux approches : 711 s utilisés par ABAQUS et seulement 67 s ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 99 | CONTRIBUTION TO A METHODOLOGY FOR THE ANALYSIS OF FRACTURE | ||
|
Summary: to analyse the behaviour of a crack placed in a multi- material structure under thermo-mechanical loads |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 100 | IOP PUBLISHING JOURNAL OF MICROMECHANICS AND MICROENGINEERING J. Micromech. Microeng. 19 (2009) 085010 (10pp) doi:10.1088/0960-1317/19/8/085010 | ||
|
Summary: ) 085010 (10pp) doi:10.1088/0960-1317/19/8/085010 Thermomechanical behavior and microstructural evolution... the thermomechanical behavior of bilayer microcantilevers, in order to better design, character- ize and manufacture... of understanding the fundamental thermomechanical deformation and microstructural evolution of bilayer |
|||
|
Source: Boston University, Center for Nanoscience and Nanobiotechnology; Zhang, Xin - Department of Manufacturing Engineering, Boston University |
|||
|
Collection: Engineering ; Materials Science |
|||