Home

About

Advanced Search

Browse by Discipline

Scientific Societies

E-print Alerts

Add E-prints

E-print Network
FAQHELPSITE MAPCONTACT US


  Topic List  Advanced Search  
Sample search results for: a 285 steel

Page:   2  3  4  5 
 
1 Estimation of Atmospheric Corrosion of High-Strength, Low-Alloy Steels
 

Summary:  .5552 For steels from the LaQue (5) database: Loss of thickness (µm) in 15.5 years = 885.16 (-48.3 C + 10.0 Mn + 28.5... Estimation of Atmospheric Corrosion of High-Strength, Low- Alloy Steels by S. Vaynman, R.S. Guico... the weatherability of steels whose compositions do not fall in the range of ASTM ...

  

Source: Northwestern University, Robert R. McCormick School of Engineering and Applied Science, Infrastructure Technology Institute

 

Collection: Engineering

 
2 Master thesis Modelling of Microstructure in
 

Summary:  Master thesis Modelling of Microstructure in TRIP-Assisted steels Guo, Lei () Department of Ferrous... ;Modelling of Microstructure in TRIP-Assisted steels #12;Modelling of Microstructure in TRIP-Assisted steels... -Assisted steels Guo, Lei This dissertation is submitted for the degree of Master of Science at ...

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
3 570 ACI Structural Journal/September-October 2008 ACI STRUCTURAL JOURNAL TECHNICAL PAPER
 

Summary:  for the flexural strength design of concrete beams reinforced with high-strength reinforcing steel that conforms... design; high-strength reinforcement; high- strength steel; reinforcing bars; strength design... . INTRODUCTION Recently, high-strength steel reinforcement conforming to ASTM A1035-071 has been developed

  

Source: 

 

Collection: Engineering

 
4 Engineering Structures 30 (2008) 18691878 www.elsevier.com/locate/engstruct
 

Summary:  -dimensional nonlinear seismic performance evaluation of retrofit measures for typical steel girder bridges Jamie E... in revised form 11 December 2007; accepted 12 December 2007 Available online 22 January 2008 Abstract Steel... -dimensional models of typical multi-span simply supported and multi- span continuous steel girder ...

  

Source: Padgett, Jamie Ellen - Department of Civil and Environmental Engineering, Rice University

 

Collection: Engineering

 
5 INCLUSIONS IN CONTINUOUS CASTING OF STEEL Lifeng Zhang (Dr.), Brian G. Thomas (Prof.)
 

Summary:  1 INCLUSIONS IN CONTINUOUS CASTING OF STEEL Lifeng Zhang (Dr.), Brian G. Thomas (Prof.) 140 Mech... of inclusions in continuous casting of steel including both indigenous and exogenous inclusions, focusing... defects in continuous cast steel products are reviewed, such as flange cracked cans, slag spots, and line

  

Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign

 

Collection: Materials Science ; Engineering

 
6 13 Modern Bainitic Steels Steels with yield strengths in excess of 1000 MPa are important in certain
 

Summary:  13 Modern Bainitic Steels Steels with yield strengths in excess of 1000 MPa are important... balance of hardenability in the context of large scale steel production technologies. Lean steels tend... -carbon steels, containing small amounts of boron and molybdenum to suppress ...

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
7 ACI Structural Journal/March-April 2009 1 ACI Structural Journal, V. 106, No. 2, March-April 2009.
 

Summary:  of high-performance (HP) steel as shear reinforcement for concrete beams. HP steel is characterized... by enhanced corrosion resistance and higher strength in comparison to ASTM A615-06 Grade 60 steel. The HP... steel selected for this research is commercially known as microcomposite multistructural formable ...

  

Source: Rizkalla, Sami H. - Department of Civil, Construction, and Environmental Engineering, North Carolina State University

 

Collection: Engineering

 
8 A COMPARATIVE STUDY OF THE WETTABILITY OF STEEL, CARBON, AND POLYETHYLENE FIBERS BY WATER
 

Summary:  A COMPARATIVE STUDY OF THE WETTABILITY OF STEEL, CARBON, AND POLYETHYLENE FIBERS BY WATER W. Lu, X... The wettability of fibers by water was found to increase in this order: polyethylene fiber, steel fiber... was effective for improving the wettability of carbon and steel fibers. Treatment with acetone was effective

  

Source: Chung, Deborah D.L. - Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo

 

Collection: Materials Science ; Engineering

 
9 ACI STRUCTURAL JOURNAL TECHNICAL PAPER Title no. 106-S18
 

Summary:  ACI STRUCTURAL JOURNAL TECHNICAL PAPER Title no. 106-S18 Behavior of High-Performance Steel... describes the behavior ofhigh-perfonnance (HPJ steel as shear reiliforcememfor concrete beams. HP steel... is characterized by enhanced conoslon resistance and higher strength in comparison to ASTM A6J5-06 Grade 60 ...

  

Source: 

 

Collection: Engineering

 
10 absolute reaction rate theory 156 accelerated cooled steels 3538
 

Summary:  absolute reaction rate theory 156 accelerated cooled steels 353±8 acicular ferrites 237±76 forging... steels 273±4 growth 240±3 inoculation 267±75 lattice matches 245 morphology 237±40 nucleation 243... bainitic steels 343±96 allotriomorphic ferrites 39, 262±5 alloys carbides 100±1, 108±14 inoculated 274

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
11 WELDING RESEARCH -s51WELDING JOURNAL
 

Summary:  625 and 309L stainless steel were de- posited onto A285 carbon steel using the electroslag welding... across the PMZ for A) 309L stainless steel/A285 carbon steel, and B) IN625/A285 carbon steel dissimilar... in dilution of ...

  

Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University

 

Collection: Materials Science

 
12 DualPhase HotPress Forming Alloy H. K. D. H. Bhadeshia a,b
 

Summary:  ­press forming steels are formed in a fully austenitic state followed by die­ quenching in order to generate... martensite and achieve a strong steel. The ductility however, tends to be limited. We explore in this work... a novel steel design in which the forming operation is in the two­phase austenite and ferrite field, so

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
13 12 Mechanical Properties 12.1 General Introduction
 

Summary:  /3750-012.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 290 285-342 290 #12;steels, it is unlikely... and Bain before the commer- cial exploitation of bainitic steels. There were dif®culties in obtaining fully... bainitic microstructures in sizable samples of steel. It has long been recognised that the in

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
14 Materials Science Forum, 500501 (2005) 6374. High Performance Bainitic Steels
 

Summary:  Materials Science Forum, 500­501 (2005) 63­74. High Performance Bainitic Steels H. K. D. H... . www.msm.cam.ac.uk/phase­trans Keywords: Hard bainite, carbide­free, fast bainite, armour, rail steels... unconventional alloys - for example, rail steels which do not rely on carbides for their properties

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
15 Spot weldability of d-TRIP steel containing , K. Y. Lee2
 

Summary:  Spot weldability of d-TRIP steel containing 0?4 wt-%C H. L. Yi1 , K. Y. Lee2 , J. H. Lim2 and H. K... . D. H. Bhadeshia*1,3 Strong steels are usually difficult to resistance spot weld because... ) assisted steels with relatively high carbon equivalents. A new development in this context is the d

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
16 4th International Conference on Earthquake Engineering Taipei, Taiwan
 

Summary:  . 155 THE SUB-STRUCTURAL PSEUDO DYNAMIC TESTS OF AFULL-SCALE TWO-STORY STEEL PLATE SHEAR WALL Chih... , Bing Qu 6 and Michel Bruneau 7 ABSTRACT This paper describes a 2-story steel plate shear wall frame... setup and phase I test results. The thickness of SS400 grade steel plate for first story wall is 3mm

  

Source: Bruneau, Michel - Multidisciplinary Center for Earthquake Engineering Research & Department of Civil, Structural and Environmental Engineering, State University of New York at Buffalo

 

Collection: Engineering

 
17 INSTITUTE OF PHYSICS PUBLISHING MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING Modelling Simul. Mater. Sci. Eng. 13 (2005) 633644 doi:10.1088/0965-0393/13/4/013
 

Summary:  strength of high strength low alloy steel based on its chemical composition and processing parameters... corresponding to each steel specimen can be plausibly modelled as observations from the 20th, 50th and 80th... levels prove sufficiently accurate for ranking steels and selecting the best combinations of composition

  

Source: Uryasev, Stanislav - Department of Industrial and Systems Engineering, University of Florida

 

Collection: Engineering

 
18 -TRIPSteel2010Yi,Hongliang Thesis for Doctor of Philosophy
 

Summary:  -TRIPSteel2010Yi,Hongliang Thesis for Doctor of Philosophy -TRIP Steel Yi, Hongliang... and Technology 2010 #12;-TRIP Steel #12;-TRIP Steel by Yi, Hongliang Department of Ferrous Technology Graduate... Co-advisor #12;-TRIP Steel Yi, Hongliang This dissertation is submitted for the degree of Doctor

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
19 University of California at Berkeley College of Engineering
 

Summary:  -strength steel y 52,000 psi (yield) #12;High-strength steel cost $2.85/lb Safety factor 2 Please use a FEA... described below with low-stress steel. Variable Value Beam type Wide-flange beam, W6x9 Beam length 120... Simple support Low-strength steel y 36,000 psi (yield) Low-strength ...

  

Source: Lin, Liwei - Department of Mechanical Engineering, University of California at Berkeley

 

Collection: Engineering

 
20 Strength is a term that is much used and abused in materials science. It is common to claim that a novel
 

Summary:  that a novel material is as strong as steel, without specifying the nature of the steel against which... . The giga-pascal steels rely for their strength on martensitic microstructures or on pearlite containing... mysteries, it is appropriate to set martensitic and pearlitic strong-steels in context. ...

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science


Page:   2  3  4  5 
Page:   1  2  3  4  5 
 
21 List of Material in MADAMS Database (with citation of original references)
 

Summary:  you, Ferrous Materials Original Reference ERC Report 20 MoCrS4 steel Completed questionnaire from Prof... . Meyer at Chemnitz [2] 21Cr16Ni5Mn3Mo steel [Meyer, 1992] [2] 25 CrMo 4 Steel [Meyer, 2000] [2] 30 Cr... NiMo 8 Steel [Meyer, 2000] [2] 35 NiCrMo 12 5 [Meyer, 1982] [2] 35 C 3Ni 1Cr [Meyer, 1992] [2] ...

  

Source: Ghosh, Somnath - Department of Mechanical Engineering, Ohio State University

 

Collection: Materials Science

 
22 Critical assessment: friction stir welding of H. K. D. H. Bhadeshia*1
 

Summary:  Critical assessment: friction stir welding of steels H. K. D. H. Bhadeshia*1 and T. DebRoy2... The level of activity in research on the friction stir welding of steels is dwarfed when compared... without melting. In contrast, there are in general no cost effective tools available for steel

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
23 B. Rietow and BG Thomas, AISTech 2008, Pittsburgh, PA, May 5-8, 2008. Using Nail Board Experiments to Quantify Surface Velocity in the CC Mold
 

Summary:  -mail: bgthomas@uiuc.edu Key words: steel, continuous casting; fluid flow, velocity measurement, computational... models, mold slag. INTRODUCTION Steel quality is greatly affected by the fluid flow pattern in the mold... , which is difficult to measure, owing to the harsh molten steel / slag environment and electrical

  

Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign

 

Collection: Materials Science ; Engineering

 
24 The climate change challenge and transitions for radical changes in the European steel industry
 

Summary:  Page 1 The climate change challenge and transitions for radical changes in the European steel... at presenting transitions envisaged in the steel industry from cleaner production to systems innovation. Limits... , distribution and consumption patterns of steel and other materials. Insights from industrial economics

  

Source: Ecole Polytechnique, Centre de mathématiques

 

Collection: Mathematics

 
25 High-Strength Concrete Columns Reinforced with Prefabricated Cage System
 

Summary:  ; and Mohammad Shamsai2 Abstract: A new steel reinforcement system is introduced to be used in concrete columns... associated with cutting, bending, and tying steel bars in traditional rebar construction. The axial strength... with that of similar rebar reinforced concrete columns. The effect of several parameters, such as steel ...

  

Source: Sezen, Halil - Department of Civil and Environmental Engineering and Geodetic Science, Ohio State University

 

Collection: Engineering

 
26 Commercialization of NuCu Steel Principal Investigators: Professors Morris Fine and Semyon Vaynman
 

Summary:  Commercialization of NuCu Steel Principal Investigators: Professors Morris Fine and Semyon Vaynman... . #12;Commercialization of NuCu Steel A426, A442, A454 Years 1-2-3 (2001-2004) $148,109 By M.E. Fine... have been fabricated from plain carbon steels that have yield strengths between 35 ksi and 50 ksi

  

Source: Northwestern University, Robert R. McCormick School of Engineering and Applied Science, Infrastructure Technology Institute

 

Collection: Engineering

 
27 Journal of Constructional Steel Research 66 (2010) 14671482 Contents lists available at ScienceDirect
 

Summary:  Journal of Constructional Steel Research 66 (2010) 1467­1482 Contents lists available at Science... Direct Journal of Constructional Steel Research journal homepage: www.elsevier.com/locate/jcsr Sub... -structural pseudo-dynamic performance of two full-scale two-story steel plate shear walls Chih-Han Linb,1 , Keh

  

Source: Bruneau, Michel - Multidisciplinary Center for Earthquake Engineering Research & Department of Civil, Structural and Environmental Engineering, State University of New York at Buffalo

 

Collection: Engineering

 
28 BEHAVIOUR OF CONCRETE SLABS REINFORCED Dr. Hany Abdalla, P.Eng.
 

Summary:  ultimate tensile strength ofLeadline, 1970 MPa (285 ksi), compared to the yield stress of steel, 435 MPa... to corrosion of steel, and consequently, a reduced serviceability. Significant fluctuation of the temperature... and use of salt for deicing also accelerates the corrosion process of the steel ...

  

Source: 

 

Collection: Engineering

 
29 1. Introduction The demand for cleaner steels increases every year. In
 

Summary:  1. Introduction The demand for cleaner steels increases every year. In addition to lowering non... -metallic oxide inclusions and con- trolling their size distribution, morphology, and composi- tion, clean steel... impurity elements such as As, Sn, Sb, Se, Cu, Zn, Pb, Cd, Te and Bi.3) These requirements vary with steel

  

Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign

 

Collection: Materials Science ; Engineering

 
30 Friction stir welding and processing has come a long way since the heady days of the pioneering work done at TWI in Cambridge some two decades ago. The FSWP 2010 conference held in Lille,
 

Summary:  and welded zone toughness of dissimilar aluminum­steel joint', Sci. Technol. Weld. Join., 2010, 15, 279­285... it comes to joining steels or dissimilar FSW joints involving steels. The mechanical characterisation... with an interpretation of load bearing capacity. A fascinating study by Chen and Nakata7 ...

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
31 A Tribute to Professor David V. Edmonds on the Eve of his Retirement Colorado School of Mines, Golden, CO, USA
 

Summary:  in the context of microalloyed, ferritic, pearlitic, bainitic, and martensitic steels, as well as cementite... -austenite interfaces in alloy steels. The prestigious ICI Research Fellowship which funded his research was meant... exceptional years at Cambridge (1968-1979). These included the British Steel Corporation Research ...

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
32 Influence of silicon on cementite precipitation E. Kozeschnik1
 

Summary:  Influence of silicon on cementite precipitation in steels E. Kozeschnik1 and H. K. D. H. Bhadeshia... rich grey cast iron.1 In strong steels, the silicon is used to control the tempering of martensite.2... compared with a corresponding steel without the silicon.8 Silicon also retards the precipitation of cemen

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
33 James A Swanson Page 1 of 16
 

Summary:  of steel structures, behavior of bolted partial restraint and partial strength moment connections, behavior... of structural fasteners, high performance steel, and the interaction between bridge decks and their supporting... Institute of Steel Construction, Accepted for Publication, Oct. 2003 4. Kayser , C. R., Swanson, J. A

  

Source: Cincinnati, University of - Department of Civil and Environmental Engineering, Infrastructure Institute

 

Collection: Engineering

 
34 Technical Report Documentation Page 1. Report No.
 

Summary:  .S.-Latin American Trade on the Southwest's Economy and Transportation System: Case Studies of Coffee and Steel... and steel from Brazil to the U.S.-destination Port of Houston. It is the second of a two-report series... as units for analysis, and the case studies of coffee and steel delineate how trade and transportation

  

Source: Southwest Region University Transportation Center

 

Collection: Engineering ; Energy Storage, Conversion and Utilization

 
35 B.G. Thomas (PI), Flow Dynamics and Inclusion Transport in Continuous Casting of Steel, NSF DMI Grant 01-15486, Final Report, 2005.
 

Summary:  B.G. Thomas (PI), Flow Dynamics and Inclusion Transport in Continuous Casting of Steel, NSF DMI... of Steel Overview of Significant Findings This report summarizes some of the many findings obtained from... to develop and apply comprehensive models of the continuous casting of steel. Results are reported here

  

Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign

 

Collection: Materials Science ; Engineering

 
36 Behavior of Reinforced Concrete ColumnSteel Beam Roof Level T-Connections under Displacement Reversals
 

Summary:  285 mm2 . These bars were assumed to be developed at the level of the bottom steel beam flange... Behavior of Reinforced Concrete Column­Steel Beam Roof Level T-Connections under Displacement... study on the seismic response of two hybrid RC column-to-steel S beam RCS roof level T

  

Source: Parra-Montesinos, Gustavo J. - Department of Civil and Environmental Engineering, University of Michigan

 

Collection: Engineering

 
37 Welding residual stresses in ferritic power plant steels
 

Summary:  REVIEW Welding residual stresses in ferritic power plant steels J. A. Francis*1 , H. K. D. H... in the estimation of welding residual stresses in austenitic stainless steels. The progress has been less convincing... steel welds, relate these to the difficulties in calculating residual stresses, and highlight some

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
38 Properties of FineGrained Steels Generated by Displacive Transformation
 

Summary:  Properties of Fine­Grained Steels Generated by Displacive Transformation H. K. D. H. Bhadeshia... of steels in which the controlling scale is 20 nm or less, i.e., comparable to that of carbon nanotubes... . The mechanical properties of such steels are abnormal. For example, in some cases the ductility vanishes

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
39 Recycling Steel Automatically-Through Resource Recovery Walter J. Foley
 

Summary:  Recycling Steel Automatically-Through Resource Recovery - ABSTRACT Walter J. Foley General Manager... , Federal Relations Steel Recycling Institute 1667 K Street, NW Suite 460 Washington, DC 20006 Last year... , more than 55 percent of all steel cans were recycled. But no matter how effective the local recycling

  

Source: Columbia University - Waste-to-Energy Research and Technology Council (WTERT)

 

Collection: Renewable Energy

 
40 Resource Recovery: Automatic Recycling of Steel Cans and Other Ferrous by Gregory L. Crawford
 

Summary:  Resource Recovery: Automatic Recycling of Steel Cans and Other Ferrous by Gregory L. Crawford Vice... President - Recycling Operations Steel Can Recycling Institute It is truly a pleasure to speak... of these facilities magnetically separated steel cans and other discarded steel items either pre- or post

  

Source: Columbia University - Waste-to-Energy Research and Technology Council (WTERT)

 

Collection: Renewable Energy


Page:   1  2  3  4  5 
Page:   1  2  3  4  5 
 
41 Technical Report Documentation Page 1. Report No.
 

Summary:  , and steel stress at crack are obtained. From this study, the relationships between the design variables... and the coefficient of thermal expansion of concrete are the most sensitive design variables, and the steel bar... Properties of Concrete.................................................................... 15 3.2 Steel

  

Source: Texas at Austin, University of - Center for Transportation Research

 

Collection: Energy Storage, Conversion and Utilization

 
42 Zhang, L., B. Rietow, B.G. Thomas, and K. Eakin, "Large Inclusions in Plain-Carbon Steel Ingots Cast by Bottom Teeming" ISIJ International, Vol. 46, No. 5, 2006; pp.670-679.
 

Summary:  1 Zhang, L., B. Rietow, B.G. Thomas, and K. Eakin, "Large Inclusions in Plain-Carbon Steel Ingots... -Carbon Steel Ingots Cast by Bottom Teeming By Prof. Lifeng Zhang (correspondence author) Department... Steel Company 700 Moravia St., New Castle, PA 16101 Email: KEAKIN@elwd.com #12;2 Abstract Inclusions

  

Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign

 

Collection: Materials Science ; Engineering

 
43 Direct current plasma spraying of mechanofused alumina-steel particles M. Bouneder, H. Ageorges, M. El Ganaoui, B. Pateyron, P. Fauchais,
 

Summary:  1 Direct current plasma spraying of mechanofused alumina-steel particles M. Bouneder, H. Ageorges... .ageorges@unilim.fr Abstract : Stainless steel particles (60 µm in mean diameter) cladded with an alumina shell (2 µm thick... of the nozzle exit: particles with a steel core with pieces of alumina unevenly distributed at their ...

  

Source: Ecole Polytechnique, Centre de mathématiques

 

Collection: Mathematics

 
44 Effective Splices for a Carbon Fiber-Reinforced Polymer
 

Summary:  r Effective Splices for a Carbon Fiber-Reinforced Polymer Strengthening System for Steel Bridges... . To implement the proposed strengthening system in longer-span steel bridges, adjacent lengths of CFRP must... to strengthen steel bridges and structures. Fiber-reinforced polymer (FRP) materials have been successfully used

  

Source: 

 

Collection: Engineering

 
45 -carbide in Alloy Steels: First-principles Jae Hoon Jang a
 

Summary:  -carbide in Alloy Steels: First-principles Assessment Jae Hoon Jang a In Gee Kim a H. K. D. H... , Cambridge CB2 3QZ, U.K. Abstract There is now a large volume of sophisticated steels which rely on silicon... words: Steels, -carbide, cementite, silicon, tempering There are two long­established reasons for adding

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
46 SolidSolid Phase Transformations in Inorganic Materials Edited by J. M. Howe, D. E. Laughlin, J. K. Lee, U. Dahmen and W. A. Soffa,
 

Summary:  ­treatments. All this can be achieved in bulk steel and without the use of expensive solutes, deformation or rapid... be exploited to develop unconventional alloys ­ for example, rail steels which do not rely on carbides... transformations that occur in steels and which lead to an invariant­plane strain shape deformation with ...

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
47 The Postweld Heat-Treatment Response of Simulated Coarse-Grained Heat-Affected Zones in a New Ferritic
 

Summary:  Ferritic Steel J.G. NAWROCKI, J.N. DuPONT, C.V. ROBINO, and A.R. MARDER The tempering behavior of simulated... coarse-grained (CG) heat-affected zones (HAZs) in two ferritic alloy steels, 2.25Cr-1Mo and HCM2S... .25Cr-1Mo steel, even though the "as- welded" hardnesses were approximately equal. Both materials

  

Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University

 

Collection: Materials Science

 
48 CHEMICAL CHARACTERIZATION OF STEEL/POLYMER INTERFACES OCTAVIO CERVANTES
 

Summary:  CHEMICAL CHARACTERIZATION OF STEEL/POLYMER INTERFACES BY OCTAVIO CERVANTES B.S., California State... CHEMICAL CHARACTERIZATION OF STEEL/POLYMER INTERFACES Octavio Cervantes Department of Materials Science... of steel/fluoropolymer (SF) interfaces is highly dependent on the chemistry of the interface. In this work

  

Source: Braun, Paul - Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign

 

Collection: Materials Science

 
49 Stabilisation of ferrite in hot rolled d-TRIP steel , K. Y. Lee2
 

Summary:  Stabilisation of ferrite in hot rolled d-TRIP steel H. L. Yi1 , K. Y. Lee2 and H. K. D. H... . Bhadeshia*1,3 A steel has recently been designed to benefit from the deformation induced transformation... that contrary to expectations from calculated phase diagrams, the steel becomes fully austenitic under

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
50 (37). The current fragility curves used for seismic risk assessment of bridges are typically based on simplified analyses or empirical
 

Summary:  ) steel girder bridges account for about 10% of the bridges in the region. The present study focuses... on developing fragility curves for seis- mically and nonseismically designed MSC steel girder bridges in CSUS... in the region reveals that the predominant difference between seismically MSC and nonseismically MSC steel

  

Source: Padgett, Jamie Ellen - Department of Civil and Environmental Engineering, Rice University

 

Collection: Engineering

 
51 PublishedbyManeyPublishing(c)IOMCommunicationsLtd Friction stir welding of dissimilar alloys a
 

Summary:  aluminium­steel joint', Science and Technology of Welding and Joining, 2010, 15, 279­285. Deb... ­19 was devoted to the joining of steels by FSW, but as yet there do not appear to be cost- effective tools which... by-passed the issue.18 A joint was made between aluminium and steel with the ordinary tool ...

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
52 Super Bainite (High Hardness) Steel Super Bainite steel is a high performance armour steel, following live fire trials it has been
 

Summary:  Materials Super Bainite (High Hardness) Steel Background Super Bainite steel is a high performance... armour steel, following live fire trials it has been demonstrated to have a hardness matching... that of alternative high hardness armour steels, and some ceramic armours, at a much reduced cost. Technology ...

  

Source: Centre for Environment, Fisheries and Aquaculture Science (Cefas)

 

Collection: Environmental Sciences and Ecology

 
53 CANADIAN METALLURGICAL QUARTERLY HOT WORKABILITY OF 2304 AND 2205 DUPLEX
 

Summary:  339 CANADIAN METALLURGICAL QUARTERLY HOT WORKABILITY OF 2304 AND 2205 DUPLEX STAINLESS STEELS E... , 2002; in revised form December, 2003) Abstract -- The duplex stainless steels 2304 and 2205 were... is observed only at very high temperatures. The hot ductility of the steels is limited by the cracking

  

Source: Niewczas, Marek - Department of Materials Science and Engineering, McMaster University

 

Collection: Materials Science

 
54 FACILITIES INSTRUCTIONS, STANDARDS, & TECHNIQUES
 

Summary:  EPRI AP-4719. (1) "Carbon Steel Pipe "Specification: ASTM A285 - Grade B; ASTM A516 - Grade 65, 70, 75... . 2. RUNNER MATERIALS Older runners in Reclamation service are commonly cast steel conforming... are used on all turbine components of plate steel construction. They are low to intermediate strength

  

Source: Laughlin, Robert B. - Department of Physics, Stanford University

 

Collection: Physics

 
55 The 3rd International Conference on Advanced Structural Steels Gyeongju, Korea, August 2224, 2006,
 

Summary:  The 3rd International Conference on Advanced Structural Steels Gyeongju, Korea, August 22­24, 2006... ­Nanocrystalline Steel H. K. D. H. Bhadeshia Graduate Institute of Ferrous Technology (GIFT) POSTECH, Pohang, Korea http... , hardness and toughness. All this in bulk steel without the use of expensive alloying elements. We now ...

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
56 Forging Industry Technical Conference, Cleveland, Ohio, 2002 FATIGUE PERFORMANCE EVALUATION OF FORGED VERSUS
 

Summary:  competitions to forged steel steering knuckle are cast iron and cast aluminum steering knuckles. The overall... steel steering knuckle will be performed. Such optimization seeks to minimize stress, maximize fatigue... will be followed for all tests. The forged steel data are available from the AISI fatigue database, while

  

Source: Fatemi, Ali - Department of Mechanical, Industrial and Manufacturing Engineering, University of Toledo

 

Collection: Materials Science ; Engineering

 
57 Name Title Affiliations H K D H Bhadeshia Professor The University of Cambridge
 

Summary:  ICHIKAWA Dr NIPPON STEEL CORPORATION 2 Osamu UMEZAWA Professor Yokohama National University 3 Toshihiko... Steel Corporation 6 Manabu TAKAHASHI Dr NIPPON STEEL CORPORATION 7 Susumu TSUKAMOTO Dr National... NIPPON STEEL CORPORATION 10 MichihikoNAGUMO Professor Waseda University 11 Yuko Nomura Ms ITOCHU Techno

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
58 Investigation of Inclusions in Steel Ingot ($100,000) Awarded Investigator: Lifeng Zhang (zhanglife@mst.edu)
 

Summary:  7 Investigation of Inclusions in Steel Ingot ($100,000) ­ Awarded Investigator: Lifeng Zhang... the bottom teeming process of steel ingots. Detailed work include the alteration of the ingate shape... represent actual filling conditions. Fig.1 Steel dendrite (left) and inclusions in steel (right

  

Source: Ragsdell, Kenneth M. - Design Engineering Center, University of Missouri-Rolla

 

Collection: Engineering

 
59 Effect of d-ferrite on impact properties of supermartensitic stainless steel
 

Summary:  Effect of d-ferrite on impact properties of supermartensitic stainless steel heat affected zones D... of the presence of non-equilibrium d-ferrite on the impact properties of a supermartensitic stainless steel... -ferrite. STWJ/410 Keywords: supermartensitic stainless steels, weld heat affected zone, delta-ferrite toughness

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
60 SELIEM, HATEM MOHAMED A. Behavior of Concrete Bridges Reinforced with High-Performance Steel Reinforcing Bars. (Under the direction of Dr.
 

Summary:  -Performance Steel Reinforcing Bars. (Under the direction of Dr. Sami Rizkalla.) High-performance (HP) steel... in comparison to conventional ASTM A 615 Grade 60 steel. Use of HP steel in concrete bridges could lead... to potential savings by reducing the amount of steel required based on ...

  

Source: 

 

Collection: Engineering


Page:   1  2  3  4  5 
Page:   1  2  3  4  5 
 
61 Cement and Concrete Research 29 (1999) 427428 0008-8846/99/$see front matter 1999 Elsevier Science Ltd. All rights reserved.
 

Summary:  Science Ltd. All rights reserved. PII: S0008-8846(98) 00205- 1 Communication Effect of embedded steel... Abstract Steel embedded in cement mortar in the uniaxial compressive stress direction was found to decrease... of mortar by steel. The latter is due to debonding at the steel-mortar interface. © 1999 ...

  

Source: Chung, Deborah D.L. - Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo

 

Collection: Materials Science ; Engineering

 
62 Technical Report Documentation Page 1. Report No. A406, 426, A442, A454 2. Government Accession No. 3. Recipient's Catalog No.
 

Summary:  and Commercialization of High-Performance Steel 6. Performing Organization Code 7. Author/s Morris E. Fine, Semyon... -precipitation-hardened, high-performance weathering steel (NUCu 70W Steel) that is produced by hot rolling after casting... and then air-cooling. Due to simple processing the steel is ...

  

Source: Northwestern University, Robert R. McCormick School of Engineering and Applied Science, Infrastructure Technology Institute

 

Collection: Engineering

 
63 42nd International SAMPE Symposium May 4-8, 1997
 

Summary:  , where a reinforcing steel-free concrete deck slab was constructed based on the research work conducted... to provide sufficient warning before failure which normally can be measured by the ductility ratio for steel... internal steel reinforcements. The lateral restraint was achieved by providing transverse ...

  

Source: 

 

Collection: Engineering

 
64 Application of Bayesian Neural Network for modeling and prediction of ferrite number in austenitic stainless steel welds
 

Summary:  in austenitic stainless steel welds M. Vasudevan, M. Murugananth*, and A.K. Bhaduri Materials Joining Section... the influence of compositional variations on ferrite content for the austenitic stainless steel base... content in austenitic stainless steel welds based on the optimized neural network model. Bayesian neural

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
65 Author's personal copy Engineering Structures 33 (2011) 17231733
 

Summary:  attracts tensile stresses due to the effects of bond between the concrete and the reinforcing steel... ­8], the equilibrium condition at a crack is typically checked using the yield strength of steel reinforcement... steel bars. Consequently, the customary equilibrium check at a crack results in the member's calculated

  

Source: Vecchio, Frank J. - Department of Civil Engineering, University of Toronto

 

Collection: Engineering

 
66 Zhang, L. and B.G. Thomas, UIUC, Continuous Casting Report No. 200206, March, 2002, Rev. Sept. 2003., pp 1-19. INCLUSION NUCLEATION, GROWTH, AND MIXING DURING
 

Summary:  ., pp 1-19. 1 INCLUSION NUCLEATION, GROWTH, AND MIXING DURING STEEL DEOXIDATION Lifeng ZHANG* and Brian... nucleation theory, thermodynamic analysis and numerical simulation, has been developed to study steel... deoxidation by aluminum in a low carbon aluminum-killed steel ladle. The model calculates the nucleation

  

Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign

 

Collection: Materials Science ; Engineering

 
67 PREFABRICATED CAGE SYSTEM FOR REINFORCING CONCRETE MEMBERS
 

Summary:  to resist applied loads. PCS is fabricated by perforating hollow steel tubes or steel plates. Various... and costly labor associated with cutting, bending, and tying steel bars in traditional rebar construction... and properties of the longitudinal and transverse steel in traditional rebar cage and PCS are ...

  

Source: Sezen, Halil - Department of Civil and Environmental Engineering and Geodetic Science, Ohio State University

 

Collection: Engineering

 
68 B.G. Thomas, Brimacombe Lecture, 59th Electric Furnace Conf., Pheonix, AZ, 2001, Iron & Steel Soc., pp. 3-30
 

Summary:  B.G. Thomas, Brimacombe Lecture, 59th Electric Furnace Conf., Pheonix, AZ, 2001, Iron & Steel Soc... ., pp. 3-30 3 MODELING OF THE CONTINUOUS CASTING OF STEEL - PAST, PRESENT AND FUTURE Brian G. Thomas... and to help solve practical problems in the continuous casting of steel. Early finite-difference models

  

Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign

 

Collection: Materials Science ; Engineering

 
69 International Conference on the Physics of Reactors "Nuclear Power: A Sustainable Resource" Casino-Kursaal Conference Center, Interlaken, Switzerland, September 14-19, 2008
 

Summary:  .7 Polyethylene C 12.0 28.1 8.7 Steel 13.5 26.8 8.7 Pixel 8 Carbon 12.0 28.5 13.4 Polyethylene C 12.0 28.5 13... Reflection and Transmission for Carbon, Polyethylene, and Steel Brandon Grogana , Seth McConchiea, * , John... , polyethylene, and steel. The neutron return data presented in ...

  

Source: Pennycook, Steve - Materials Science and Technology Division, Oak Ridge National Laboratory

 

Collection: Materials Science

 
70 Transformation induced plasticity assisted steels: stress or strain affected martensitic
 

Summary:  Transformation induced plasticity assisted steels: stress or strain affected martensitic... transformation? S. Chatterjee and H. K. D. H. Bhadeshia* Transformation induced plasticity (TRIP) assisted steels... , Strain induced transformation Introduction Transformation induced plasticity (TRIP) assisted steels have

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
71 PRELIMINARY REVIEW COPY Technical Report Documentation Page
 

Summary:  up 100 feet were considered. A steel bridge using rolled W sections with either metal grid deck... , the rolled beam steel bridge was the most economical. The concrete bridges require larger cranes for erection... contractors. Details of the steel girder bridge design are included including a novel cross frame design

  

Source: Texas at Austin, University of - Center for Transportation Research

 

Collection: Energy Storage, Conversion and Utilization

 
72 Design of CreepResistant Steel Welds D. Cole and H. K. D. H. Bhadeshia
 

Summary:  Design of Creep­Resistant Steel Welds D. Cole and H. K. D. H. Bhadeshia University of Cambridge... with quantitative methods for the design of steel weld metals for elevated temperature applications. A methodology... Typical operating parameters for steels used in the manufacture of power plant are compared against

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
73 SteelConcrete Composite Beams Considering Shear Slip Effects
 

Summary:  Steel­Concrete Composite Beams Considering Shear Slip Effects Jianguo Nie1 and C. S. Cai, P.E., M... .ASCE2 Abstract: The present study investigated the effects of shear slip on the deformation of steel... transformed section method except that American Institute of Steel Construction AISC specifications recommend

  

Source: Cai, Steve C. S. - Department of Civil and Environmental Engineering, Louisiana State University

 

Collection: Engineering

 
74 Thermal Stability of Retained Austenite in Bainitic Steel: an in situ study
 

Summary:  Thermal Stability of Retained Austenite in Bainitic Steel: an in situ study By A. Saha Podder, I... Carbide­free bainitic steels in which a proportion of the microstructure consists of a mixture of bainitic... . Molinari and H. K. D. H. Bhadeshia One role of retained austenite is to enhance the ductility of the steel

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
75 POSCO Lectures: The Bainite Reaction H. K. D. H. Bhadeshia, GIFT, POSTECH
 

Summary:  Examination of a time­temperature­transformation (TTT) diagram for an eutectoid carbon steel (Fig. 1), bearing... of close-packed directions within those planes. 1 #12;Figure 1: TTT diagram for a 0.89 wt% carbon steel. (a... in the same steel [2]. It was emphasized earlier that upper bainite forms in two distinct stages, the ...

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
76 GFRP DOWEL BARs FOR CONCRETE PAVEMENT Susan L. Grieef
 

Summary:  ;ABSTRACT Traditionally, plain steel or epoxy-coated steel has be~n used for dowel bars in concrete... pavements. However, problems arising from corrosion ofthe steel have prompted recent investigations... . A total ofeight push-offspecimens were tested with either steel or Isorod dowels that were either

  

Source: 

 

Collection: Engineering

 
77 BAINITE IN STEELS [13:43 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-prelims.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 1 1-24
 

Summary:  BAINITE IN STEELS [13:43 3/9/01 C:/3B2 Templates/keith/3750 BAINITE.605/3750-prelims.3d] Ref: 0000... /3750-prelims.3d] Ref: 0000 Auth: Title: Chapter 00 Page: 2 1-24 #12;BAINITE IN STEELS Transformations... that bainitic steels have featured prominently in this kind of metal- lurgy is a testimony to the depth

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
78 TRIP-assisted steels: cracking of high-carbon S. Chatterjee and H. K. D. H. Bhadeshia*
 

Summary:  TRIP-assisted steels: cracking of high-carbon martensite S. Chatterjee and H. K. D. H. Bhadeshia... * Modern TRIP assisted steels contain retained austenite with carbon concentrations in excess of 1 wt... fine martensite. It is the fine scale of the retained austenite in TRIP assisted steels that permits

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
79 Process Technology Division Conference Proceedings, (Baltimore, MD, March 25-28, 2001), Vol. 18, Iron and Steel Society, Warrendale, PA, 2001, pp 895-912.
 

Summary:  . 18, Iron and Steel Society, Warrendale, PA, 2001, pp 895-912. TUNDISH NOZZLE CLOGGING ­ APPLICATION... of steel for several reasons. Firstly, clogging increases the frequency of operation disruptions to change... in the mold, leading to surface defects in the steel product and even breakouts. Dislodged clogs also disturb

  

Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign

 

Collection: Materials Science ; Engineering

 
80 Ecole doctorale 432 : Sciences des Metiers de l'Ingenieur Doctorat ParisTech
 

Summary:  Metallurgical evolution and creep strength of 9-12% Cr heat resistant steels at 600 C and 650 C Directeurs de th... 2011 #12;iv Abstract 9-12%Cr tempered martensite steels are used for high temperature (400-600 C... steels with improved long-term creep strength relies on a better understanding of the long

  

Source: Paris-Sud XI, Université de - Institut d'Optique, Laboratoire Charles-Fabry, Groupe d'Optique Atomique

 

Collection: Physics


Page:   1  2  3  4  5 
Page:   1  2  3  4  5 
 
81 52nd Hatfield Memorial Lecture Large chunks of very strong steel
 

Summary:  . Bhadeshia: J. Phys. Colloque, 2003, 112, 285­288 60. H. K. D. H. Bhadeshia: Millenium Steel, 2004, 5, 25... 52nd Hatfield Memorial Lecture Large chunks of very strong steel H. K. D. H. Bhadeshia* Most new... materials are introduced by selectively comparing their properties against those of steels. ...

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
82 PROCEEDINGS, Thirty-Sixth Workshop on Geothermal Reservoir Engineering Stanford University, Stanford, California, January 31 -February 2, 2011
 

Summary:  Invest Carbon Steel with Coating 28.5 Million Carbon Steel with Inhibitor 28.2 Million Stainless Steel... , such as carbon steel, stainless steel, etc. The downtime of a geothermal power plant will depend on the speed... of probabilistic distributions of the ...

  

Source: Stanford University - Department of Energy Resources Engineering, Reservoir Simulation Research

 

Collection: Fossil Fuels

 
83 MEASUREMENTS OF MOLTEN STEEL/FLUX INTERFACE PHENOMENA IN THIN SLAB CASTING
 

Summary:  MEASUREMENTS OF MOLTEN STEEL/FLUX INTERFACE PHENOMENA IN THIN SLAB CASTING By Joseph W. Shaver B... trials investigating meniscus behavior and defects in thin-slab casting were conducted at Nucor Steel... in the emergence of a novel and inexpensive method of measuring meniscus steel velocity using nailboards

  

Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign

 

Collection: Materials Science ; Engineering

 
84 Scripta Materialia 52 (2004) 461-466 Effect of 30 Tesla Magnetic Field on Transformations in a
 

Summary:  in a Novel Bainitic Steel R. A. Jaramillo, S. S. Babu, G. M. Ludtka, R. A. Kisner, J. B. Wilgen, G... transformation characteristics of novel bainitic steels have been studied, both under ordinary conditions... found in the published literature. Introduction Novel bainitic steels have recently been developed

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
85 SMITH, GLEN. Bond Characteristics and Qualifications of Adhesives for Marine Applications and Steel Pipe Repair. (Under the direction of Dr. Sami Rizkalla.)
 

Summary:  and Steel Pipe Repair. (Under the direction of Dr. Sami Rizkalla.) Performance of adhesives significantly... . The bond characteristics between composite-to-composite and composite-to-steel materials are investigated... for marine application and repair of steel pipeline. #12;BOND CHARACTERISTICS AND QUALIFICATIONS OF ADHESIVES

  

Source: 

 

Collection: Engineering

 
86 12th North American Waste to Energy Conference May 17-19. 2004. Savannah. Georgia USA
 

Summary:  -2217 SUPERHEATER LIFE WITH STAINLESS, INCONEL, AND CARBON STEEL ALLOYS AT THE MAINE ENERGY RECOVERY COMPANY Ken... processes approximately 285,000 tons per year ofMSW, producing approximately 8,000 tons per year... describes these changes. Waterwalls At startup in 1987, all boiler components were carbon steel. The first

  

Source: Columbia University - Waste-to-Energy Research and Technology Council (WTERT)

 

Collection: Renewable Energy

 
87 CHAPTER 5: FACTORY BUILDINGS SINGLE STORY REINFORCED CONCRETE
 

Summary:  ;151 236. The Coach Bogie Workshop of the Tangshan Rolling Stock Plant had steel roof trusses. The large... . The Coach Body Workshop of the Tangshan Rolling Stock Plant had steel roof trusses. The well-type skylight... collapsed at the Cast Steel Workshop of the Tangshan Rolling Stock Plant. (Photo: Earthquake Resistance

  

Source: Heaton, Thomas H. - Division of Geological and Planetary Sciences, California Institute of Technology

 

Collection: Geosciences ; Engineering

 
88 Effect of mould expansion on pattern allowances in sand casting of steel
 

Summary:  Effect of mould expansion on pattern allowances in sand casting of steel F. Peters1 , R. Voigt2 , S... . Z. Ou3 and C. Beckermann*3 For steel castings produced in sand moulds, the expansion of the sand... , which in the present experiments controls the amount of steel in the mould and thus the heat input

  

Source: Beckermann, Christoph - Department of Mechanical and Industrial Engineering, University of Iowa

 

Collection: Materials Science

 
89 Characterist Passenger Demand
 

Summary:  LacsPublicTransit,Inc. MurrayCounty SteeleCountyAreaTransit PrairieFiveCAC,Inc. FaribaultCounty CityofBrainerd Cottonwood... 2030: $216.9 million 2009 actual costs: $55 million *Future year costs adjusted for 2.85% inflation... adjusted for 2.85% inflation. #12;17 2015 Target level* of 80% of total needs =$102 million 2025 Target

  

Source: Levinson, David M. - Department of Civil Engineering, University of Minnesota

 

Collection: Engineering

 
90 Optimization of Composition and Processing Parameters for Alloy Development: A Statistical Model-Based Approach
 

Summary:  science, steel fabrication, regression model, Charpy V-Notch, efficient frontier 1 Introduction In recent... and toughness behavior of high strength low alloy (HSLA-100) steel. The yield strength was shown to be well... by the experimental program involves several expensive rounds and phases of steel pouring and testing. Models

  

Source: Uryasev, Stanislav - Department of Industrial and Systems Engineering, University of Florida

 

Collection: Engineering

 
91 L. Zhang, B.G. Thomas, et al. ISS Tech 2003 (Conf. Proc.), Indianapolis, IN, USA, April.27-30, 2003, ISS-AIME, Warrendale, PA, 2003, pp. 141-156.
 

Summary:  , ISS-AIME, Warrendale, PA, 2003, pp. 141-156. 141 141 Inclusion Investigation during Clean Steel... Zhu The Technical Research Center, Baosteel CO., Baoshan Shanghai 201900, P.R.China Key words: Steel... of clean steel to product quality is increasingly being recognized. Controlling the size distribution

  

Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign

 

Collection: Materials Science ; Engineering

 
92 Durability of Concrete Beams Prestressed with CFRP Halit Cenan Mertol, Sami Rizkalla, Paul Scott, Janet M. Lees and Raafat El-Hacha
 

Summary:  prestressed with steel wires. A total of 15 beams have been constructed and tested under different mechanical... in comparison to equivalent steel prestressed concrete beams. Furthermore, test results show that the beams... prestressed with steel wires did not survive the environmental exposure over 12 months whereas the beams

  

Source: 

 

Collection: Engineering

 
93 Lecture 15 : Steel's conjecture MATH285K -Spring 2010 Lecturer: Sebastien Roch
 

Summary:  Lecture 15 : Steel's conjecture MATH285K - Spring 2010 Lecturer: Sebastien Roch References: [Mos03... that E[ ^(a, b)] = e-(a,b) . 1 Upper bound Steel's conjecture asserts that ancestral reconstruction... ]. 1 #12;Lecture 15: Steel's conjecture 2 An illustration of Steel's conjecture. Here ...

  

Source: Roch, Sébastien - Department of Mathematics, University of California at Los Angeles

 

Collection: Biology and Medicine ; Mathematics

 
94 Journal of Engineering for Industry, ASME, New York, NY, Vol. 118, No. 1, 1996, pp. 37-44. SPREAD SHEET MODEL OF CONTINUOUS CASTING
 

Summary:  , in the continuous casting process, the temperature history of the solidifying steel shell is very important... the solidifying steel shell and the copper mold controls this temperature distribution (Jenkins et al., 1994... in the mold region of continuous steel slab casters (Thomas, 1989). These models include the effects of ...

  

Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign

 

Collection: Materials Science ; Engineering

 
95 implemented in bridges; the focus in this paper will be on using two types of structural fuses.
 

Summary:  . First, an innovative steel plate shear link (SPSL) is introduced. The proposed SPSL shown in Figure 1... consists of a steel plate restrained from out-of-plane buckling using a concrete encasement... and an unbonding material. The steel plate is designed to yield in shear, at a stress equal to 0.6Fy dissipating

  

Source: Bruneau, Michel - Multidisciplinary Center for Earthquake Engineering Research & Department of Civil, Structural and Environmental Engineering, State University of New York at Buffalo

 

Collection: Engineering

 
96 Bibliography 1. G. Balalchandran, M. L. Bhatia, N. B. Ballal and P. Krishna Rao: Some
 

Summary:  Aspects on Designing Nickel Free High Nitrogen Austenitic Stainless Steels, ISIJ Int., Vol. 41:9 (2001... Steels, Journal of the Iron and Steel Institute 207 (1969), pp. 379­ 390. 3. Internet website: http... : Stainless Steels, Les Editions de Physique Les Ulis (1993). 6. Internet website: http

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
97 Bibliography 1. G. Balalchandran, M. L. Bhatia, N. B. Ballal and P. Krishna Rao: Some
 

Summary:  Aspects on Designing Nickel Free High Nitrogen Austenitic Stainless Steels, ISIJ Int., Vol. 41:9 (2001... Steels, Journal of the Iron and Steel Institute 207 (1969), pp. 379- 390. 3. Internet website: http... : Stainless Steels, Les Editions de Physique Les Ulis (1993). 6. Internet website: http

  

Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group

 

Collection: Materials Science

 
98 NIST NCSTAR 1-3D (Draft) Federal Building and Fire Safety Investigation of the
 

Summary:  Disaster Mechanical Properties of Structural Steels (Draft) William E. Luecke J. David Mc... Investigation of the World Trade Center Disaster Mechanical Properties of Structural Steels (Draft) William E... for steels from the World Trade Center (WTC): elastic, room-temperature tensile, room-temperature high strain

  

Source: National Institute of Standards and Technology (NIST), Ceramics Division

 

Collection: Materials Science

 
99 Int J Fract (2010) 162:187204 DOI 10.1007/s10704-010-9472-y
 

Summary:  plastic behavior of austenitic steel TRIP-120 compared with martensitic steel HSLA-100 F. Latourte · Z... ThemechanicalperformanceofTRIP-120, a novel transformation induced plasticity steel alloy, is evaluated for different loading... cases and strain rates. The performance is compared with HSLA-100, a low- alloy ...

  

Source: Espinosa, Horacio D. - Department of Mechanical Engineering, Northwestern University

 

Collection: Engineering

 
100 European Journal of Mechanics A/Solids 25 (2006) 215229 The response of clamped sandwich plates with lattice cores
 

Summary:  at a displacement rate of 10-5 m s-1 using a flat-bottomed steel cylindrical punch of diameter 28.5 mm... the plates at mid-span with metal foam projectiles. The sandwich plates comprise AISI 304 stainless steel... face sheets and either AL-6XN stainless steel pyramidal core or AISI 304 stainless ...

  

Source: Fleck, Norman A. - Mechanics, Materials and Design Division, Department of Engineering, University of Cambridge

 

Collection: Engineering ; Materials Science


Page:   1  2  3  4  5