| Sample search results for: a537 carbon steel |
| 1 | Commercialization of NuCu Steel Principal Investigators: Professors Morris Fine and Semyon Vaynman | ||
|
Summary: have been fabricated from plain carbon steels that have yield strengths between 35 ksi and 50 ksi... Ksi yield as in the micro-alloyed steels in common use). Lower carbon content for improved welding... the lowest equivalent carbon content of any other construction ... |
|||
|
Source: Northwestern University, Robert R. McCormick School of Engineering and Applied Science, Infrastructure Technology Institute |
|||
|
Collection: Engineering |
|||
| 2 | Investigation of Inclusions in Steel Ingot ($100,000) Awarded Investigator: Lifeng Zhang (zhanglife@mst.edu) | ||
|
Summary: ) Publications: 1. Lifeng Zhang, Bret Rietow, Brian G. Thomas, Ken Erkin. "Large Inclusions in Plain-Carbon Steel... 7 Investigation of Inclusions in Steel Ingot ($100,000) Awarded Investigator: Lifeng Zhang... the bottom teeming process of steel ingots. Detailed work include the alteration of the ingate ... |
|||
|
Source: Ragsdell, Kenneth M. - Design Engineering Center, University of Missouri-Rolla |
|||
|
Collection: Engineering |
|||
| 3 | Technical Report Documentation Page 1. Report No. A406, 426, A442, A454 2. Government Accession No. 3. Recipient's Catalog No. | ||
|
Summary: For many decades, bridges have been fabricated from plain carbon steels that have yield strengths between... minimum (compared to 50 Ksi yield as in the micro-alloyed steels in common use). Lower carbon content... carbon content of any other construction steel and, ... |
|||
|
Source: Northwestern University, Robert R. McCormick School of Engineering and Applied Science, Infrastructure Technology Institute |
|||
|
Collection: Engineering |
|||
| 4 | CFRP Materials for Reinforced Concrete Structures Mina Dawood Research Assistant, Constructed Facilities Laboratory, North | ||
|
Summary: connection of carbon and steel in the presence of an electrolyte, such as saltwater, can possibly lead... between steel and carbon. Finally, there must be a sustained cathodic reaction on the more noble material... the occurrence of galvanic corrosion of the materials. Therefore, although ... |
|||
|
Source: Rizkalla, Sami H. - Department of Civil, Construction, and Environmental Engineering, North Carolina State University |
|||
|
Collection: Engineering |
|||
| 5 | JOURNAL DE PHYSIQUE CoZZoque C4, suppZ&mentau no 12, Tome 43, dScembre 2982 page C4-417 | ||
|
Summary: OF THE LOW-CARBON MARTENSITIC STRUCTURAL STEEL FOR HIGH STRENGTH AND TOUGHNESS AND ITS STRUCTURE... and compared for medium and low-carbon martensitic structural steels. The structure-property relations for low-carbon... obtained, related the composition of these ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 6 | Ris-R-1244(EN) Tool Steels | ||
|
Summary: with properties, which are different from those of carbon steels due to the presence of alloying elements... reduction in hardness and temper brittleness [22]. Tool steels, expect for plain carbon and low-alloyed tool... of hardness for tool steels. The four different classes refers to: ... |
|||
|
Source: Risø National Laboratory |
|||
|
Collection: Multidisciplinary Databases and Resources |
|||
| 7 | Abstract submitted for Corrosion 2000 Orlando, Fl . Mar 26-31, 2000 | ||
|
Summary: OXIDES FROM SHORT-TERM ATMOSPHERIC CORROSION OF CARBON STEEL Rama Balasubramanian1 , Desmond C. Cook1 , T... formed on carbon steel atmospherically exposed for short times along the Gulf of México. Two sets... of carbon steel coupons were exposed between 1 and 12 ... |
|||
|
Source: Cook, Desmond - Department of Physics, Old Dominion University |
|||
|
Collection: Physics |
|||
| 8 | Use Of High-Performance A710 Grade B Steel in Construction of | ||
|
Summary: steel mill Low carbon weldable without preheat #12;A710 Grade B steel is Cu-precipitation strengthened... -mechanical-controlled processing steel plates of any size produced by any steel mill Low carbon weldable without preheat Copper... -mechanical-controlled ... |
|||
|
Source: Northwestern University, Robert R. McCormick School of Engineering and Applied Science, Infrastructure Technology Institute |
|||
|
Collection: Engineering |
|||
| 9 | Cement and Concrete Research 29 (1999) 427428 0008-8846/99/$see front matter 1999 Elsevier Science Ltd. All rights reserved. | ||
|
Summary: in a moist room (humidity 100%) for 28 days. In another set of specimens, a low-carbon rimmed steel plate (2... Science Ltd. All rights reserved. PII: S0008-8846(98) 00205- 1 Communication Effect of embedded steel... Abstract Steel embedded in cement mortar in the uniaxial compressive stress direction was ... |
|||
|
Source: Chung, Deborah D.L. - Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo |
|||
|
Collection: Materials Science ; Engineering |
|||
| 10 | SeptemberOctober 2007 27 cFrP Materials For reinForced | ||
|
Summary: connection of carbon and steel in the presence of an electrolyte, such as saltwater, can possibly lead... the case between steel and carbon. · Finally, there must be a sustained cathodic reaction on the more noble... , in this case the steel, can experience an acceler- ated rate of ... |
|||
|
Source: |
|||
|
Collection: Engineering |
|||
| 11 | JOURNALDE PHYSIQUEIV Colloque C7, supplkment au Journalde Physique 111, Volume 3,novembre1993 | ||
|
Summary: structuresin continuouslycooledlow-carbon automotive steels EA. KHALID and D.V. EDMONDS Department of Materials... - carbon microalloyed steels suitable for automotive applications, after continuous cooling from the hot... impact toughness as compared with microalloyedmedium- carbon ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 12 | JOURNALDE PHYSIQUEIV Colloque C8, supplement au Journal de Physique III,Volume 5, ddcembre 1995 | ||
|
Summary: Variation of Transition Temperatures from Upper to Lower Bainites in Plain Carbon Steels M. Oka and H... results and explanations for the transition temperature from upper to lower bainites in carbon steels... to a microstructural change from a feathery to a needle one in medium and high ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 13 | Master thesis Modelling of Microstructure in | ||
|
Summary: -Assisted steels Adivisor: Liu, Weijie; Bhadeshia, H.K.D.H. Text in English Abstract A carbon diffusion... transformation of ferrite into austenite is completed in paraequilibrium, in hypoeutectoid steel. V #12;D Carbon... or plain carbon steel; BH: bake hardenable ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 14 | JOURNAL DE PHYSIQUE IV Colloque C7, suppl6ment au Journal de Physique 111,Volume 5, novembre 1995 | ||
|
Summary: nuclei appeared along deformation bands, as in the laboratory steel with a similar carbon content... the decarburization process is slower than in the laboratory steel in spite of the fact that the initial carbon... Recovery and Grain Growth in a 2% Si - 0.3% A1 - 0.003%C Steel D. ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 15 | Transmission Mssbauer Analysis of Nanophased Oxides formed on High Strength Steels | ||
|
Summary: . Samples of weathering steel and carbon steel were exposed in Campeche, along the Gulf of Mexico for up... clearly shown the need for improved corrosion monitoring and analysis techniques [1]. Carbon steel... , the corrosion rate for carbon steel ... |
|||
|
Source: Cook, Desmond - Department of Physics, Old Dominion University |
|||
|
Collection: Physics |
|||
| 16 | STUDY OF SHORT-TERM ATMOSPHERIC CORROSION OF CARBON STEEL Rama Balasubramanian1 | ||
|
Summary: #12;STUDY OF SHORT-TERM ATMOSPHERIC CORROSION OF CARBON STEEL Rama Balasubramanian1 , Desmond C... formed on carbon steel atmospherically exposed for short times along the Gulf of México. Two sets... of carbon steel coupons were exposed between 1 and 12 months at ... |
|||
|
Source: Cook, Desmond - Department of Physics, Old Dominion University |
|||
|
Collection: Physics |
|||
| 17 | ASTM A-710 GRADE B High Performance | ||
|
Summary: -lbs at -80°F. Due to its very low carbon equivalent, NUCu 70W (ASTM A710 Grade B) steel generally does... Steel Construction, March, 2007 S. Vaynman, M.E. Fine, S.P. Bhat, "High-Strength, Low-Carbon, Ferritic... and Microstructure of a Weldable High Performance Low Carbon ... |
|||
|
Source: Northwestern University, Robert R. McCormick School of Engineering and Applied Science, Infrastructure Technology Institute |
|||
|
Collection: Engineering |
|||
| 18 | Communication Seebeck effect in steel fiber reinforced cement | ||
|
Summary: used for cement than carbon fibers, so study of steel fiber reinforced cement is techno- logically... the carbon-fiber cement pastes. An increase of the steel fiber content from 0.5% to 1.0% by mass of cement... with the lower steel fiber content. In contrast, for pastes with ... |
|||
|
Source: Chung, Deborah D.L. - Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo |
|||
|
Collection: Materials Science ; Engineering |
|||
| 19 | Materials Science & Metallurgy Part II Course C9, Alloys, H. K. D. H. Bhadeshia | ||
|
Summary: concentration of the steel. As the transformation temperature is reduced, some of the carbon is encouraged... microstructure results when this siliconalloyed steel is transformed into upper bainite. The carbon... and microstructure of bainite in steels. A plate of bainite forms without ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 20 | ORNL 2010-G01022/jcn UT-B ID 200601819 | ||
|
Summary: steel, titanium, and other scrap metal in industrial electric arc furnaces. Researchers invented... a carbon fiber-pitch binder composition that is tough enough to avoid recurrent electrode failure... in industrial smelting. The technology also reduces the amount of carbon needed in the production process |
|||
|
Source: Controlled Fusion Atomic Data Center (CFADC) |
|||
|
Collection: Plasma Physics and Fusion |
|||
| 21 | JOURNAL DE PHYSIQUE IV ColloqueC7,supplement au Journal de Physique 111,Vol. 1,dkembre 1991 | ||
|
Summary: MODELLING OF LASER INDUCED METALLURGICAL TRANSFORMATIONSIN TITANIUM ALLOYS AND CARBON STEELS A.I. GORDIENKO... ->y -transformation in eutectic carbon steel during heat treatment using laser irradiation have been established... diffusion in steel in the same conditions. It leads to a ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 22 | H. K. D. H. Bhadeshia, Encyclopedia of Materials Science: Science and Technology, eds K. Buschow, R. W. Cahn, M. C. Flemings, B. Iischner, E. J. Kramer and S. Mahajan, Pergamon | ||
|
Summary: . Ordinary rail steels contain about 0.7 wt% of carbon and are pearlitic (Table 1). Pearlite consists... and continuity of the cementite layers depending on the carbon concentration of the steel. As the transformation... and Schweitzer, 1982). Work on a low carbon bainitic ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 23 | JOURNALDE PHYSIQUEIV ColloqueC8, supplCmentau Journal de PhysiqueIII, Volume 5,dkcembre 1995 | ||
|
Summary: School of Mines, Golden, Colorado 80401, U.S.A. Abstract. A series of medium-carbon low alloy steels was quenched... the commercial hardenable steels are in fact low-alloy steels. However, it is carbon content which largely... determines the hardness and strength of low- alloy ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 24 | JOURNALDE PHYSIQUE IV ColloqueC8, supplkmentau Journal de Physique111,Volume 5, dCcembre 1995 | ||
|
Summary: formed at the early stage of transformation was made in silicon alloyed high-carbon steels (C wt%=0.6, 0... - 1Mn-0.34C and 2%- 1Mn- 0.59C steels[5]. 4.DISCUSSION According to the displacive modelB1, the carbon... rises as shown by a dashed line in Fig. 5 because it rises rapidly in ultra-low ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 25 | ORNL 2011-G00246/jcn UT-B ID 200501518 | ||
|
Summary: to lower-strength, heavier conventional structure materials such as steel. Current carbon fiber production... ORNL 2011-G00246/jcn UT-B ID 200501518 09.2011 System to Continuously Produce Carbon Fiber via... developed at ORNL, carbon fibers with specific mechanical properties can be produced on a continuous ... |
|||
|
Source: Pennycook, Steve - Materials Science and Technology Division, Oak Ridge National Laboratory |
|||
|
Collection: Materials Science |
|||
| 26 | A COMPARATIVE STUDY OF THE WETTABILITY OF STEEL, CARBON, AND POLYETHYLENE FIBERS BY WATER | ||
|
Summary: A COMPARATIVE STUDY OF THE WETTABILITY OF STEEL, CARBON, AND POLYETHYLENE FIBERS BY WATER W. Lu, X... was effective for improving the wettability of carbon and steel fibers. Treatment with acetone was effective... of reinforcement (e.g., steel, carbon and polymer) as ... |
|||
|
Source: Chung, Deborah D.L. - Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo |
|||
|
Collection: Materials Science ; Engineering |
|||
| 27 | EFFECT OF RUST ON THE WETTABILITY OF STEEL BY WATER W. Lu and D.D.L. Chung1 | ||
|
Summary: December 15, 1997; in final form February 6, 1998) ABSTRACT Rust, as formed on steel by immersion of low-carbon... EFFECT OF RUST ON THE WETTABILITY OF STEEL BY WATER W. Lu and D.D.L. Chung1 Composite Materials... steel in water, was found to improve the wettability of steel by water. The ... |
|||
|
Source: Chung, Deborah D.L. - Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo |
|||
|
Collection: Materials Science ; Engineering |
|||
| 28 | Materials Science & Metallurgy Master of Philosophy, Materials Modelling, Course MP10, Process Modelling, H. K. D. H. Bhadeshia | ||
|
Summary: transformation. Each curve represents a Fe-1MnC wt.% steel with the carbon concentration as indicated... that the general trend in the steel industry is to reduce the carbon concentration, sometimes to levels approaching... concentration of the steel approaches its solubility in ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 29 | Materials Science & Metallurgy Part II Course C9, Alloys, H. K. D. H. Bhadeshia | ||
|
Summary: .% steel with the carbon concentration as indicated on the diagram. The magnitude of the parabolic rate... observations given that the general trend in the steel industry is to reduce the carbon concentration... increases sharply as the carbon concentration of the ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 30 | Materials Science & Metallurgy Master of Philosophy, Materials Modelling, Course MP10, Process Modelling, H. K. D. H. Bhadeshia | ||
|
Summary: into ferrite and cementite (a compound of iron and carbon Fe3C). Steels with a carbon concentration less than... with the undercooling below MS. The martensite in steels is supersaturated with carbon. Carbon occupies octa- hedral... cell edges (Fig. 2). Fig. 2: ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 31 | Very Strong, LowTemperature Bainite Case for Support, Part I | ||
|
Summary: ; by controlling the mean carbon concentration; and by minimising the transformation temperature. Steels were... at the point where bainite ceases to grow in a siliconrich steel. The carbon concentration of this austenite... of ductility whereas martensite in the same steel does not. ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 32 | Cement and Concrete Research 30 (2000) 327330 0008-8846/00/$ see front matter 2000 Elsevier Science Ltd. All rights reserved. | ||
|
Summary: reduction ability of concrete by using steel reinforcement and steel surface treatments Sihai Wen, D... by three (or more) orders of magnitude upon the embedment of steel rebars in the mortar, mainly due... to the increase in the vibration damping ca- pacity. By sandblasting the steel rebars, the loss ... |
|||
|
Source: Chung, Deborah D.L. - Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo |
|||
|
Collection: Materials Science ; Engineering |
|||
| 33 | JOURNALDE PHYSIQUE IV Colloque C8, supplkmentau Journal de PhysiqueIII, Volume 5, dkcembre 1995 | ||
|
Summary: the toughness of the steel. 1. CARBON DIFFUSION DURING THE FORMATION OF LATH MARTENSITE Rao and Thomas[l] found... from high resolution TEM that in quenched steel with low or medium carbon the retained austenite... steel with 0.27%C, the time required for carbon ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 34 | Reduction of CO2 emissions and utilization of slag | ||
|
Summary: emissions is 314 #12;CO2 sequestration by mineral carbonation. Con- crete and steel manufacturers produce... Figure 1. Annual production of calcium carbonate from steelmaking slag, case Ruukki steel mill. #12;of... utilization. A simplified example of integration of a carbonation process ... |
|||
|
Source: Zevenhoven, Ron - Heat Engineering Laboratory, Åbo Akademi University, |
|||
|
Collection: Fossil Fuels |
|||
| 35 | Proceedings of the 1st International Symposium on Steel Science (IS3 The Iron and Steel Institute of Japan, 2007 | ||
|
Summary: -C-Si-Mn steel indicate two lattice parameters in the austenite, possibly due to the development of carbon... . For example, the carbon concentration of the retained austenite in FeNiC steels can be measured by atom probe... Proceedings of the 1st International Symposium on Steel Science ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 36 | Effect of strain rate and temperature on mechanical properties and fracture mode of high strength | ||
|
Summary: 2006 The effect of strain rate on the flow stress of a low carbon high strength ferritic steel... Nanoscale precipitation strengthening of low carbon ferritic steels is an alternate path to high strength... carbon steel containing approximately 1.35 wt.% Cu and 0.75 ... |
|||
|
Source: Espinosa, Horacio D. - Department of Mechanical Engineering, Northwestern University |
|||
|
Collection: Engineering |
|||
| 37 | Abstract submitted for the International Conference on the Applications of the Mssbauer Effect. | ||
|
Summary: -TERM ATMOSPHERIC EXPOSURES OF CARBON STEEL Rama Balasubramanian1 , Desmond C. Cook1 , T. Perez2 , and J. Reyes2 1... on carbon steel atmospherically exposed for short times along the Gulf of México. Two sets of carbon steel... is one of the most important phenomena ... |
|||
|
Source: Cook, Desmond - Department of Physics, Old Dominion University |
|||
|
Collection: Physics |
|||
| 38 | 13 Modern Bainitic Steels Steels with yield strengths in excess of 1000 MPa are important in certain | ||
|
Summary: generation of bainitic steels, in which the emphasis is on reductions in carbon and other alloying element... the carbon-equivalent of the steel can be reduced to improve weldability (Fig. 13.9). Accelerated cooling... . The martensite does not form in the HAZ because of the lower carbon ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 39 | Materials Solutions for Hydrogen Delivery in Pipelines | ||
|
Summary: information #12;Project Team SECAT (KY) Project Manager Oregon Steel Mills (OR) Steel Pipe Producer Columbia... ) Codes and Standards DGS Metallurgical Solutions (OR) Steel consulting University of Illinois (IL) Basic... Objective: Develop materials technologies to minimize embrittlement of steels used for ... |
|||
|
Source: DOE Office of Energy Efficiency and Renewable Energy, Hydrogen, Fuel Cells and Infrastructure Technologies Program |
|||
|
Collection: Energy Storage, Conversion and Utilization ; Renewable Energy |
|||
| 40 | JOURNAL DE PHYSIQUE IV Colloque C7, supplCment au Journal de Physique 111,Volume 5, novembre 1995 | ||
|
Summary: of liquid steel through the nozzlesof the continuouscasting machine. Carbon In order to achieve extra deep... -drawing quality (EDDQ) for car bodies and beverage-can fabrication, ultra-low Carbon steels are needed. Carbon... additionsin orderto achievean interstitialfree (IF) ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 41 | Author's personal copy Magnetic properties of stainless steels at room and cryogenic temperatures | ||
|
Summary: soft magnetic properties adequate for magnetic applications. The carbon content of the steels was found... to affect the permeability and coercive force, with lower-carbon steels displaying significantly higher... in higher carbon steels. These inclusions inhibit ... |
|||
|
Source: Oxley, Paul - Department of Physics, College of the Holy Cross |
|||
|
Collection: Physics |
|||
| 42 | 85th Steelmaking Conference Proceedings, ISS-AIME, Warrendale, PA, 2002 pp. 431-452. EVALUATION AND CONTROL OF STEEL CLEANLINESS REVIEW | ||
|
Summary: generate many defects in the steel product. For example, Low Carbon Al-Killed steel (LCAK steel) coils... (Belgium) 37 2000 [62] Koerhar Works, Fundia (Finland) (high carbon steel) Gas stirring 32 23 2000 [63] #12... for producing ultra low ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 43 | 7 Upper & Lower Bainite Although there have been attempts at generalising the denition of bainite, the | ||
|
Summary: and Okamoto (1986) on high purity, high carbon Fe±0.85±1.8C wt% steels has shown the absence of upper bainite... results for plain carbon steels are presented in Fig. 7.2. In each case, td is found to go through... .2 m) in plain carbon steels with 0.1, 0.2 and 0.4 ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 44 | Basic oxygen furnace based steelmaking processes and cleanliness control at Baosteel | ||
|
Summary: . For example, interstitial free (IF) steel requires both carbon and nitrogen to be ,30 ppm; line pipe steel... , H and C levels to achieve low carbon aluminium killed (LCAK) steel, ultra LCAK steel... examination. The steel powders resulting from ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 45 | Proceedings of the XI International Symposium on Gas Flow and Chemical Lasers and High Power Laser Conference, Edinburgh, UK 25-30 August 1996, SPIE Vol. 3092, ed. H.J. Baker, pp. 758-763 (1997). | ||
|
Summary: -5776 ABSTRACT A chemical oxygen-iodine laser (COIL) was used for cutting aluminum and carbon steel. Cut depths... of 20 mm were obtained in aluminum and 41 mm in carbon steel using an N2 gas assist and 5-6 kW of power... on target. The same laser at the same power level produced a cut depth of 65 mm in ... |
|||
|
Source: Carroll, David L. - CU Aerospace |
|||
|
Collection: Engineering |
|||
| 46 | CARBON ENRICHMENT IN RESIDUAL AUSTENITE DURING MARTENSITIC TRANSFORMATION | ||
|
Summary: , retained austenite, autotempering and low carbon steel. Abstract Carbon enrichment of austenite and carbide... precipitation during martensitic transformation have been investigated in three novel low-carbon steels... concentration x of the austenite is much higher in each case than ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 47 | Proceedings of the 4th Ulcos seminar, 1-2 October 2008 | ||
|
Summary: , Dissemination & Training / n°1-1 Introducing carbon constraint in the steel sector : ULCOS scenarios... prices and carbon constraint scenarios. The impact of climate policy on the steel sector... The global steel production mix is greatly impacted by the introduction of a ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 48 | Self-sensing of flexural damage and strain in carbon fiber reinforced cement and effect of embedded steel reinforcing bars | ||
|
Summary: strain in carbon fiber reinforced cement is enhanced by the presence of embedded steel rebars... conductive than carbon fiber), there has been concern that the presence of steel rebar may make carbon fiber... of steel rebars on the self-sensing ability of ... |
|||
|
Source: Chung, Deborah D.L. - Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo |
|||
|
Collection: Materials Science ; Engineering |
|||
| 49 | Use of CFRP for Strengthening Steel Structures & Bridges S. Rizkalla1 | ||
|
Summary: suited to enhance the serviceability of steel structures. The typical material properties of the carbon... carbon fiber materials to steel surfaces. This included selection of a saturating resin to bond the dry... to select a suitable resin for bonding carbon fiber tow sheets to ... |
|||
|
Source: |
|||
|
Collection: Engineering |
|||
| 50 | High Performance Copper-Precipitation-Hardened Steel Semyon Vaynman, Morris E. Fine | ||
|
Summary: -rolled and air-cooled low-carbon, copper-precipitation-hardened steel developed at Northwestern University (NUCu... was added to reduce grain size. The steel has very low carbon equivalent weldability index. The initial... ) Welding. Due to the very low carbon level and the absence of ... |
|||
|
Source: Northwestern University, Robert R. McCormick School of Engineering and Applied Science, Infrastructure Technology Institute |
|||
|
Collection: Engineering |
|||
| 51 | JOURNAL DE PHYSIQUE Colloque C1, suppl6ment au no I, Tome 45, janvier 1984 page Cl-301 | ||
|
Summary: performances d'un aimant qua- drupole . Abstract - The low carbon steel developped f o r the magnet core... steel are t h e candidates, b u t they are r a t h e r expensive. Recently t h e cheaper low carbon... steel i s used frequently t o economize the expenses. However, the low ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 52 | Spectroscopic identification of protective and non-protective corrosion coatings on | ||
|
Summary: by about 75% relative to unpainted carbon steel [2,3]. The cost savings for these maintenance-free bridges... is significant relative to painted carbon steel, and concrete bridges. Additionally, weathering steel bridges now... on weathering and carbon ... |
|||
|
Source: Cook, Desmond - Department of Physics, Old Dominion University |
|||
|
Collection: Physics |
|||
| 53 | NAME ____________________________________ ID# __________________________ CHBE 213 EXAM 2 (covering ch. 7 -11) | ||
|
Summary: .61% carbon content _U___A shiny and brittle metal has HCP structure _F___6140 steel has about 0.61% carbon... ) A carbon steel which would transform isothermally from ferrite and cementite to 100% austenite when heated... with martensite 20) (1 pt) A plain carbon ... |
|||
|
Source: Montana State University, Chemical and Biological Engineering Department, Composite Technologies Research Group |
|||
|
Collection: Materials Science |
|||
| 54 | Electromagnetic interference shielding reaching 70 dB in steel fiber cement | ||
|
Summary: effectiveness in cement-based materials by using short steel fibers, as steel is more conductive than carbon... .50 carbon 40 [10] Thermoplastic 7.0 nickel 1.0 87 [11] Cement 0.72 steel 1.5 70 this work S. Wen, D... Electromagnetic interference shielding reaching 70 dB in ... |
|||
|
Source: Chung, Deborah D.L. - Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo |
|||
|
Collection: Materials Science ; Engineering |
|||
| 55 | PROPERTIES, IDENTIFICATION, HEAT TREATMENT OF METALS | ||
|
Summary: steel alloys, The only difference between iron and steel is the carbon content. Cast iron contains more... than 2-percent carbon, while steel contains less than 2 percent. An alloy is a substance composed... of two or more elements. Therefore, all steels are an alloy ... |
|||
|
Source: Gellman, Andrew J. - Department of Chemical Engineering, Carnegie Mellon University |
|||
|
Collection: Engineering ; Chemistry |
|||
| 56 | Journal of Nuclear Materials 103 Rr104 (1981) 327.332 North-Holland Publishing Company | ||
|
Summary: pressure and low X-ray attenuation coefficient of carbon give it a lower erosion rate than stainless steel... of both carbon and stainless steel has been computed for various X-ray spectra and gas reradiation... -ray and debris spectra, and buffer gas have been selected. The evaporation of a ... |
|||
|
Source: Harilal, S. S. - School of Nuclear Engineering, Purdue University |
|||
|
Collection: Plasma Physics and Fusion |
|||
| 57 | Materials Science and Engineering A 395 (2005) 124128 Fabrication of carbon nanotube reinforced alumina matrix | ||
|
Summary: Materials Science and Engineering A 395 (2005) 124128 Fabrication of carbon nanotube reinforced... in revised form 2 December 2004; accepted 6 December 2004 Abstract Carbon nanotube reinforced alumina matrix... distribution of carbon nanotubes within alumina matrix can be obtained by mixing the carbon ... |
|||
|
Source: Hong, Soon Hyung - Department of Materials Science and Engineering, Korea Advanced Institute of Science and Engineering |
|||
|
Collection: Materials Science |
|||
| 58 | JOURNAL DE PHYSIQUE 1%' Colloque C7,suppMmentau Journal de Physique111,Volume 3, novembre 1993 | ||
|
Summary: Structure and properties of TM processed HSLA steels A.C. KNEISSLand I? BALDINGER Institute of Physical... with the influence of steel composition (with respect to the microalloyingelements) and therrnomechanical treatment... on structure and mechanical behaviour of HSLA (High Strength Low Alloy) steels. Four different ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 59 | Communication Origin of the thermoelectric behavior of steel fiber cement paste | ||
|
Summary: [3]. The use of carbon fibers in place of steel fibers gives smaller effects [13,5]. The addition... Communication Origin of the thermoelectric behavior of steel fiber cement paste Sihai Wen, D... ; accepted 30 November 2001 Abstract Carrier scattering dominates the origin of the Seebeck effect in steel |
|||
|
Source: Chung, Deborah D.L. - Department of Mechanical and Aerospace Engineering, State University of New York at Buffalo |
|||
|
Collection: Materials Science ; Engineering |
|||
| 60 | Hyperfine Interactions 153: 6182, 2004. 2004 Kluwer Academic Publishers. Printed in the Netherlands. | ||
|
Summary: the corrosion by about 75% relative to unpainted carbon steel [2, 3]. The cost savings for these maintenance... -free bridges is significant relative to painted carbon steel, and concrete bridges. Additionally, weathering... on weathering and carbon steels. One common ... |
|||
|
Source: Cook, Desmond - Department of Physics, Old Dominion University |
|||
|
Collection: Physics |
|||
| 61 | SCHNERCH, "Design Guidelines for Strengthening Steel Beams", 1/10 DESIGN GUIDELINES FOR STRENGTHENING OF | ||
|
Summary: carbon fiber reinforced polymer (CFRP) materials for strengthening typical steel-concrete composite... Guidelines for Strengthening Steel Beams", 10/10 Strengthened with High Modulus Carbon Fiber Reinforced... SCHNERCH, "Design Guidelines for Strengthening Steel Beams", 1/10 DESIGN ... |
|||
|
Source: |
|||
|
Collection: Engineering |
|||
| 62 | Elec 331 -Surgical Instruments Surgical Instruments | ||
|
Summary: Elec 331 - Surgical Instruments 1 Surgical Instruments Stainless Steel · Iron Alloy · Stains (rusts... . · Precipitate out during cooling Interstitial Atoms in Fe · Carbon (C) Precipitates out of stable Austenite... · Nitrogen (N) Smaller atomic radius than Carbon Solubility greater than for ... |
|||
|
Source: Pulfrey, David L. - Department of Electrical and Computer Engineering, University of British Columbia |
|||
|
Collection: Energy Storage, Conversion and Utilization ; Engineering |
|||
| 63 | 1 2P9 Steels Practical 2P9 | ||
|
Summary: plain carbon steels are provided; E, N and P, containing 0.54, 0.85 and 1.15 weight percent carbon... piece, L, has been prepared from 0.54 weight percent carbon steel, oil quenched from 840ºC and tempered... weight percent carbon, 2 weight percent silicon, 0.8 ... |
|||
|
Source: Paxton, Anthony T. - Department of Pure and Applied Physics, Queen's University Belfast |
|||
|
Collection: Physics ; Materials Science |
|||
| 64 | Liquid Metal Corrosion of 316L Stainless Steel, 410 Stainless Steel, and 1015 Carbon Steel in a Molten Zinc Bath | ||
|
Summary: Liquid Metal Corrosion of 316L Stainless Steel, 410 Stainless Steel, and 1015 Carbon Steel... carbon steel provided a lower solubility than 410 stainless steel. Investigating the failure mechanisms... alloys (1015 low-carbon ... |
|||
|
Source: Barbero, Ever J. - Department of Mechanical and Aerospace Engineering, West Virginia University |
|||
|
Collection: Materials Science |
|||
| 65 | Sengupta, J., H.-J. Shin, B. G. Thomas, and S.-H. Kim, "Micrograph Evidence of Meniscus Solidification and Sub-Surface Microstructure Evolution in Continuous-Cast Ultra-Low Carbon Steels", Acta Materialia, Vol. 54, | ||
|
Summary: Solidification and Sub-Surface Microstructure Evolution in Continuous-Cast Ultra-Low Carbon Steels", Acta... AND SUB-SURFACE MICROSTRUCTURE EVOLUTION IN CONTINUOUS-CAST ULTRA-LOW CARBON STEELS J. SENGUPTA 1 , H... -784, Republic of Korea Key words: Casting; EBSD; SEM; Solidification microstructure; Ultra-low ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 66 | Bainite transformation kinetics Part 2 Non-uniform distribution of carbon | ||
|
Summary: effect can be investigated. Calculations wereperformed for three hypothetical steels of different carbon... be hidden when a comparison is made at constant driving force. The higher carbon steels show less... on the autocatalysisfactor greatly affecting the overall transformation rate. For ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 67 | The Fourth International Conference on Advances in Steel Structures 13-15 June 2005, Shanghai, China | ||
|
Summary: The Fourth International Conference on Advances in Steel Structures 13-15 June 2005, Shanghai... , China THE EFFECT OF FATIGUE LOADING ON THE BONDING STRENGTH BETWEEN CFRP AND STEEL PLATES Ms. Hongbo Liu... ) ABSTRACT Recent years the application of CFRP (Carbon Fibre Reinforced Plastics) laminates in strengthening |
|||
|
Source: |
|||
|
Collection: Engineering |
|||
| 68 | By: Leif Karlsson, ESAB AB, Gothenburg. The large and steadily growing family of stainless steels can offer unique combina- | ||
|
Summary: such as formability, strength and cryogenic toughness. I The vast majority of the world's steel is carbon and alloy... recent contribution to the stainless family [8]. These steels are extremely low in carbon (typically <0... Brearley. This first stainless steel was martensitic with ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 69 | Prediction of Reoxidation Inclusion Composition in Casting of Steel | ||
|
Summary: that are found in steel castings. They account for approximately 83% of the inclusions in carbon and low... inclusion compositions in carbon steel castings as a function of the Al content and the Mn/Si ratio. Griffin... of the predictions and the comparisons with measurements for carbon, ... |
|||
|
Source: Beckermann, Christoph - Department of Mechanical and Industrial Engineering, University of Iowa |
|||
|
Collection: Materials Science |
|||
| 70 | JOURNAL DE PHYSIQUE CoZZoque C4, supple'ment au n o 12, Tome 43, de'cembre 1982 page C4-547 | ||
|
Summary: at a frequency of 1 Hz in martensitic carbon steels. Baraz et al.(l) and Mezzetti et al. (2) have found 370... -547 AN INTERNAL FRICTION PEAK DUE TO STRESS INDUCED a ' MARTENSITE I N A SUS 304 STEEL N. Igata, H.B. ChenXand K... to be due to a' martensite phase in a cold worked 304L stain- less steel has been ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 71 | Inclusion Nucleation, Growth, Transport and Entrapment during Steel Casting Investigator: Lifeng Zhang (zhanglife@mst.edu) | ||
|
Summary: . 712720 6. Guo Wei, Lifeng Zhang, Miaoyong Zhu, "Modeling on Dendrite Growth of Medium Carbon Steel... 3 Inclusion Nucleation, Growth, Transport and Entrapment during Steel Casting Investigator: Lifeng... : or the high-volume, low-profit-margin steel industry to continue competing in the world market, it ... |
|||
|
Source: Ragsdell, Kenneth M. - Design Engineering Center, University of Missouri-Rolla |
|||
|
Collection: Engineering |
|||
| 72 | Current Opinion in Solid State and Materials Science 8 (2004) 251-257 Very Strong Bainite | ||
|
Summary: for the high carbon steels of interest here [27]. Together with the growth condition, the function allows... . The carbon concentrations of the austenite and bainitic ferrite, determined using X-ray analysis in Steels... , University of Cambridge, Pembroke Street, Cambridge CB2 3QZ, U. K. hkdb@cus.cam.ac.uk ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 73 | Strength is a term that is much used and abused in materials science. It is common to claim that a novel | ||
|
Summary: Si-3Mn steel as a function of the carbon concentration; (b) the calculated time required to initiate... that a novel material is as strong as steel, without specifying the nature of the steel against which... . The giga-pascal steels rely for their strength on martensitic microstructures ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 74 | Altenpohl. D.; Materials in World Perspective, Assessment of Resources, Technologies and Trends for Key Materials Industries; Springer-verlag Berlin | ||
|
Summary: of Carbon Dioxide Emissions, thesis; 1991 [3] Böhm, C., Eberle, A.; Latest developments in COREX® technology... [9] Eurofer; Communications from Mr A. de Jong, Hoogovens, 1997 [10] Eurostat; Iron and steel, Yearly... statistics 1994; ECSC-EG-EAG, Brussels.Luxembourg, 1994 [11] Eurostat; Iron and steel yearbook 1976 |
|||
|
Source: Groningen, Rijksuniversiteit - Centre for Ecological and Evolutionary Studies, Department of Marine Benthic Ecology and Evolution, |
|||
|
Collection: Biology and Medicine ; Environmental Sciences and Ecology |
|||
| 75 | Carbonation: An Efficient and Economical Process for CO2 Sequestration | ||
|
Summary: concrete is not harmful but it may be detrimental for reinforcing steel in concrete. Carbon dioxide... of reinforcing steel or coating that could protect or reduce the chances of corrosion due to carbonation reaction... Carbonation: An Efficient and Economical Process for CO2 ... |
|||
|
Source: Wisconsin-Milwaukee, University of - Department of Civil Engineering and Mechanics, Center for By-Products Utilization |
|||
|
Collection: Engineering ; Materials Science |
|||
| 76 | ISSUES TO ADDRESS... How are metal alloys classified and how are they used? | ||
|
Summary: ;4 Carbon: Present in all steels, it is the most important hardening element. Also increases the strength... -speed" P Mold steel L Low-alloy F Carbon-tungsten #12;8 Stainless Steels Ferritic Austenitic (non... Carbon Steels (<0.2%C). Low to ... |
|||
|
Source: Montana State University, Chemical and Biological Engineering Department, Composite Technologies Research Group |
|||
|
Collection: Materials Science |
|||
| 77 | JOURNALDE PHYSIQUE IV Colloque C7, supplkmentau Journal de Physique 111, Volume 3, novernbre 1993 | ||
|
Summary: the mixing. For laser welding, core is made of a medium carbon steel with the following composition (wt %): 0... of an oil quenched and tempered medium carbon steel, i.e. a fine tempered martensite revealed by etching. b... et al (4), after laser melting of a medium carbon ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 78 | Copper Precipitation Hardened, High Strength, Weldable Steel by Semyon Vaynman 1 | ||
|
Summary: . Abstract Steel containing 0.03% carbon, 1.35% copper and 0.84% nickel had yield strength in the 540-625 MPa... weldability without pre-heating and post-heating, the carbon content of the steel was kept low and high... -Oregon), are listed in TABLE 1. For good weldability the carbon ... |
|||
|
Source: Northwestern University, Robert R. McCormick School of Engineering and Applied Science, Infrastructure Technology Institute |
|||
|
Collection: Engineering |
|||
| 79 | Microstructural Evolution in Power Plant Steels | ||
|
Summary: . In plain carbon steels with <0.5 wt. % C, very little austenite is retained (2% or less) but higher carbon... . % in plain-carbon steels. Higher carbon contents gave a microstruc- ture of irrationally arranged laths... throughout the prior austenite grain. In ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 80 | Materials Science Forum, 500501 (2005) 6374. High Performance Bainitic Steels | ||
|
Summary: ; the transformation temperature (T) can be reduced to increase xT0 ; the average carbon concentration x of the steel... Materials Science Forum, 500501 (2005) 6374. High Performance Bainitic Steels H. K. D. H... . www.msm.cam.ac.uk/phasetrans Keywords: Hard bainite, carbidefree, fast bainite, armour, rail ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 81 | The Engineering Materials Institute (EMI) incorporates the BlueScope Steel Metallurgy Centre (BSMC), which | ||
|
Summary: Overview The Engineering Materials Institute (EMI) incorporates the BlueScope Steel Metallurgy... Centre (BSMC), which co-ordinates research of specific relevance to the steel industry. EMI research fits... and environmental sustainability of key industries, such as steel production. EMI consists of 27 academic |
|||
|
Source: Cox, Grant - School of Mathematics and Applied Statistics, University of Wollongong |
|||
|
Collection: Materials Science ; Mathematics |
|||
| 82 | WELDING RESEARCH -s55WELDING JOURNAL | ||
|
Summary: between the carbon steel and stainless steel end members to permit the deposition of two similar welds... a tran- sition joint between 1085 carbon steel and 316 stainless steel. Microstructural devel- opment... exist in industry that require joining of ... |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 83 | Proceedings of the ICALEO `96 Conference, Southfield, Michigan, USA, 14-17 October 1996 Experimental Analysis of the Materials Processing Performance | ||
|
Summary: -iodine laser (COIL) was used for cutting aluminum and carbon steel, and for depositing a ceramic coating... on a substrate. Cut depths of 20 mm were obtained in aluminum and 41 mm in carbon steel using an N2 gas assist... in carbon steel with an O2 gas assist; a low ... |
|||
|
Source: Carroll, David L. - CU Aerospace |
|||
|
Collection: Engineering |
|||
| 84 | JOURNALDE PHYSIQUEIV Colloque C8, supplCment au Journal de PhysiqueHI,Volume 5,dCcembre 1995 | ||
|
Summary: carbon equivalents (C,,) than is possible with C-Mn steels [I]. Such high-strength low-alloy (HSLA... , and it is evident that the volume fraction of M* increases with carbon content in steels MCLA, HCMA and HCLA... be equated to the effect of carbon by comparing ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 85 | .IPHYS. IV FRANCE 7 (1997) Colloque C5, Supplementau Journal de Physique 111de novembre 1997 | ||
|
Summary: annealing in two low carbon Mn-Si steels. Bainitic transformation was followed by dilatometryand SEM... of a carbon content 1.5times lsger for steel B than for steel A, the maximum amount of retained austenite... -Assisted Multiphase Steels P. Jacques, E. Girault*, J. ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 86 | -TRIPSteel2010Yi,Hongliang Thesis for Doctor of Philosophy | ||
|
Summary: into martensite in TRIP-assisted steels. C. The -TRIP steel is expected to be weldable even though its carbon... .........................................................................................................131 Appendix 2 Medium carbon fully pearlitic steel obtained by slow ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 87 | Evaluation of Economical and Efficient Method for Corrosion | ||
|
Summary: Evaluation of Coatings and Inhibitors in ConcreteInhibitors in Concrete Outline: Corrosion Behavior of Carbon Steel... and Galvanized Steel in the presence of chlorides. Effect of Calcium Nitrite in Carbon Steel and Galvanized Steel... Intensity of ... |
|||
|
Source: Popov, Branko N. - Center for Electrochemical Engineering & Department of Chemical Engineering, University of South Carolina |
|||
|
Collection: Energy Storage, Conversion and Utilization ; Engineering |
|||
| 88 | JOURNAL DE PHYSIQUE Colloque C8, Supplement au no 12, Tome 49, dkembre 1988 | ||
|
Summary: EXPANSION, AND ELECTRICAL RESISTIVITY STUDIES OF FeAlMnC STEELS S. U. Jen, Y. D. Yao and H. Y. Pai Institute... ), and electrical resistivity ( p ) studies between 10 and 300 K. Carbon and aluminum contents are found... briefly. 1. Introduction 3. Results and discussions FeAlMnC steels are subjects of growing interests |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 89 | ISSUES TO ADDRESS... How are metal alloys classified and how are they used? | ||
|
Summary: ® tools 4027 steel #12;2 Carbon: Present in all steels, it is the most important hardening element. Also... based "high-speed" P Mold steel L Low-alloy F Carbon-tungsten Stainless Steels Ferritic Austenitic... deformation. This depends upon the ... |
|||
|
Source: Montana State University, Chemical and Biological Engineering Department, Composite Technologies Research Group |
|||
|
Collection: Materials Science |
|||
| 90 | 100 150 200 250 300 350 10 15 20 25 | ||
|
Summary: -% in the untreated steel. This accumulation of carbon at the interface has been observed previously in surface... steel beam-induced desorption of nitrogen is negligible, so that precise nitrogen depth-profiles can... to both depth and concentration. Nitrogen Depth-Profiles in Stainless Steel from Elastic ... |
|||
|
Source: Timmers, Heiko - School of Physical, Environmental and Mathematical Sciences, Australian Defence Force Academy, University of New South Wales |
|||
|
Collection: Physics ; Materials Science |
|||
| 91 | Amr Shaat, David Schnerch, Amir Fam, and Sami Rizkalla 1 Retrofit of Steel Structures Using Fiber Reinforced Polymers (FRP): State-of-the-Art1 | ||
|
Summary: Keywords: FRP, steel, girder, bridge, bond, retrofit, rehabilitation, sheets, strips, carbon, galvanic15... of FRP sheets, including glass, aramid, and carbon, around damaged steel pipelines. A14 mathematical... corrosion to22 occur between carbon and steel: an ... |
|||
|
Source: Rizkalla, Sami H. - Department of Civil, Construction, and Environmental Engineering, North Carolina State University |
|||
|
Collection: Engineering |
|||
| 92 | JOURNAL DE PHYSIQUEIV Colloque Cl, supplCment au Journal de Physique111,Volume 6,janvier 1996 | ||
|
Summary: , for the highest Si-alloyed steels E and F, the carbon content and volume fraction of retained austenite increase... is twinned in steels A and B because of the higher than 0.4 wt% carbon contentof The "MA constituent... austenite. Alternatively, and in agreement with its only 0.3 wt% ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 93 | Introduction of a novel, scrap-based, fully continuous steelmaking process Kent D. Peaslee | ||
|
Summary: -equilibrium conditions allow for a partial de-O of the steel in the Oxidizer, depending on the required final carbon... carbon content and iron yield in the EAF and low final carbon and phosphorus concentration. The steel... % and is in close equilibrium with the ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 94 | Introduction of a novel, scrap-based, fully continuous steelmaking process Kent D. Peaslee | ||
|
Summary: in the Oxidizer, depending on the required final carbon concentration. In the third vessel (Reducer), steel... and iron yield in the EAF and low final carbon and phosphorus concentration. The steel enters... % and is in close equilibrium with the carbon content of the ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 95 | The role of carbon segregation on nanocrystallisation of pearlitic steels processed by severe plastic deformation. | ||
|
Summary: 1 The role of carbon segregation on nanocrystallisation of pearlitic steels processed by severe... and the carbon distribution in a pearlitic steel processed by torsion under high pressure was investigated... in such carbon steel than in pure iron. The nanostructure ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 96 | S T A I N L E S S S T E E L W O R L D O C T O B E R 2 0 0 2 www.stainless-steel-world.net16 i l & G a sO | ||
|
Summary: steel. INTRODUCTION Low carbon and modified2 low carbon "13 %Cr" martensitic stainless steels have... Phase diagrams Low-carbon martensitic stainless steels are essentially alloys of Fe, Cr and Ni. Figure 1... from the melt, low carbon ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 97 | Technical Report Documentation Page 1. Report No. | ||
|
Summary: of stainless steels in chloride- contaminated and carbonated concrete. The stainless steels studied were 304L... al. 1998). The paper describes the behavior of stainless steel coupled with carbon steel in order... for partial substitution of ... |
|||
|
Source: Texas at Austin, University of - Center for Transportation Research |
|||
|
Collection: Energy Storage, Conversion and Utilization |
|||
| 98 | Influence of silicon on cementite precipitation E. Kozeschnik1 | ||
|
Summary: the carbon concentration of the retained austenite rather than the average concentration of the steel.1... reinforces this theory in that it shows that y90% of the carbon atoms in a silicon rich martensitic steel... (continuous curves) and 300M (dotted curves) steels as function of ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 99 | JOURNAL DE PHYSIQUE Colloque C5, supplement au n010, Tome 49, octobre 1988 | ||
|
Summary: of the carbon segregation to the grain boundaries has been little investigated in low alloy steels. We tried... to estimate the grain boundary segregation of carbon in low alloy steels by means of AES analysis, assuming... % in the case of MO steels without manganese. The effect of ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 100 | JOURNAL OF MATERIALS SCIENCE 32 (1997) 1711--1715 Carbon black/high density polyethylene conducting | ||
|
Summary: JOURNAL OF MATERIALS SCIENCE 32 (1997) 1711--1715 Carbon black/high density polyethylene conducting... resistivity P. J. MATHER, K. M. THOMAS Northern Carbon Research Laboratories, Bedson Building, Department... of Chemistry, University of Newcastle upon Tyne, Newcastle upon Tyne NE1 7RU, UK Carbon black |
|||
|
Source: Thomas, Mark - School of Chemical Engineering and Advanced Materials, University of Newcastle upon Tyne |
|||
|
Collection: Materials Science |
|||