| Sample search results for: a-286 austenitic stainless |
| 1 | ORNL 2010-G01207/chj UT-B ID 200701976 | ||
|
Summary: structure changes and offers better, tougher mechanical properties. High manganese austenitic stainless... to substitute manganese have produced austenitic stainless steels with desirable properties at either room... Austenitic Stainless Steel, U.S. Patent 7,754,305, ... |
|||
|
Source: Controlled Fusion Atomic Data Center (CFADC) |
|||
|
Collection: Plasma Physics and Fusion |
|||
| 2 | Bibliography 1. G. Balalchandran, M. L. Bhatia, N. B. Ballal and P. Krishna Rao: Some | ||
|
Summary: Aspects on Designing Nickel Free High Nitrogen Austenitic Stainless Steels, ISIJ Int., Vol. 41:9 (2001... ), pp. 10181027. 2. K. J. Irvine, T. Gladman and F. P. Pickering: The Strength of Austenitic Stainless... , Coating and Magnetic Property Issues of Nonmagnetic Austenitic ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 3 | Bibliography 1. G. Balalchandran, M. L. Bhatia, N. B. Ballal and P. Krishna Rao: Some | ||
|
Summary: Aspects on Designing Nickel Free High Nitrogen Austenitic Stainless Steels, ISIJ Int., Vol. 41:9 (2001... ), pp. 1018-1027. 2. K. J. Irvine, T. Gladman and F. P. Pickering: The Strength of Austenitic Stainless... , Coating and Magnetic Property Issues of Nonmagnetic Austenitic ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 4 | 1. Introduction The focus of the work presented in the initial chapters is to explore the factors that affect the | ||
|
Summary: that affect the tensile properties of austenitic stainless steels, including the yield strength (or 0.2% proof... have incorporated austenitic stainless steel into their new twin drum washing machine, Contrarotator... solution and precipitation hardening. 1.1 Austenitic ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 5 | Influence of Annealing Treatment on the Formation of Nano/Submicron Grain Size AISI 301 Austenitic | ||
|
Summary: Stainless Steels D.L. JOHANNSEN, A. KYROLAINEN, and P.J. FERREIRA Nano/submicron austenitic stainless steels... austenitic stainless steels are heavily cold-worked, and annealed to convert the deformation... of annealing temperature. In this work, an AISI 301 metastable ... |
|||
|
Source: Ferreira, Paulo J. - Department of Mechanical Engineering, University of Texas at Austin |
|||
|
Collection: Materials Science ; Engineering |
|||
| 6 | Literature review Precipitation in creep resistant austenitic | ||
|
Summary: behaviour of (TizAl) alloyed austenitic stainless steels (type A286) is very little documented.6... Literature review Precipitation in creep resistant austenitic stainless steels T. Sourmail... Austenitic stainless steels have ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 7 | Elec 331 -Surgical Instruments Surgical Instruments | ||
|
Summary: Elec 331 - Surgical Instruments 1 Surgical Instruments Stainless Steel · Iron Alloy · Stains (rusts... arrangement of atoms (lattice) · Ferrite < 910° C · Austenite 910°-1400° C · Melting point 1540° C... Atomic Structure of Iron Crystal Body Centered Ferrite ( iron) Face Centered Austenite ( iron) 910° C |
|||
|
Source: Pulfrey, David L. - Department of Electrical and Computer Engineering, University of British Columbia |
|||
|
Collection: Energy Storage, Conversion and Utilization ; Engineering |
|||
| 8 | METALLURGICAL AND MATERIALS TRANSACTIONS A VOLUME 28A, FEBRUARY 1997--277 An Experimental and Theoretical Study of Heat-Affected Zone | ||
|
Summary: and Theoretical Study of Heat-Affected Zone Austenite Reformation in Three Duplex Stainless Steels STAFFAN... the duplex grades were ob- served with an increased ability to reform austenite with increased alloying... austenite reformation. This implies that the alloy nitrogen compositions should lie close to ... |
|||
|
Source: Ferreira, Paulo J. - Department of Mechanical Engineering, University of Texas at Austin |
|||
|
Collection: Materials Science ; Engineering |
|||
| 9 | Characterisation of severely deformed austenitic stainless steel wire | ||
|
Summary: Characterisation of severely deformed austenitic stainless steel wire H. S. Wang1 , J. R. Yang1... of 316L austenitic stainless steel has been examined using TEM and X-ray diffraction. The deformation... austenitic stainless steel threads and used, for example, to ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 10 | JOURNAL DE PHYSIQUE IV Colloque C4, suppltment au Journal de Physique 111,Volume 4, avril1994 | ||
|
Summary: amounts of predeposited materials. The 316L austenitic stainless steel is widely used owing to its high... carbides. 11. RESULTS The substrate material used for the experimentswas the austenitic stainless steel 316... . CONCLUSION We have shown that 316L austenitic ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 11 | Materials Science and Engineering A 527 (2010) 19861996 Contents lists available at ScienceDirect | ||
|
Summary: electron microscopy Austenitic stainless steel Martensite Microstructure evolution Nano/sub-micron grains... rights reserved. 1. Introduction The corrosion resistance of austenitic stainless steels (SSs) makes them... in nano/submicron grained AISI 301LN stainless steel S. Rajasekharaa , ... |
|||
|
Source: Ferreira, Paulo J. - Department of Mechanical Engineering, University of Texas at Austin |
|||
|
Collection: Materials Science ; Engineering |
|||
| 12 | Scripta Materialia 55 (2006) 779-781 Transformation Texture in Deformed Stainless Steel | ||
|
Summary: .msm.cam.ac.uk/phasetrans In an elegant experimental study on an austenitic stainless steel, Gey et al. [1] found that not all of the 24... reported by Lagneborg [11]. The lattice parameter of austenite in 304 stainless steel is estimated to be 0... Scripta Materialia 55 (2006) 779-781 Transformation Texture ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 13 | COLLOQUE DE PHYSIQUE Colloque C8, Supplement au nO1l, Tome 50, novembre 1989 | ||
|
Summary: IN AND AROUND FERRITE-AUSTENITE PHASE BOUNDARIES IN DUPLEX STAINLESS STEELS V.J. GADGIL*, J.J. SWENS*" and B... 8039, NL-7550 + KA Hengelo, The Nether1 ands Abstract - Austenitic-ferritic duplex stainless steels... are particularly susceptible, as observed not only in austenitic but also ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 14 | ORNL's alumina-forming austenitic alloy family licensed to Carpenter Technology Corp. | ||
|
Summary: Technology Corp. has licensed an alumina-forming austenitic (AFA) stainless steel alloy developed under... ORNL's alumina-forming austenitic alloy family licensed to Carpenter Technology Corp. Carpenter... stainless steels form a less stable chromium-rich surface oxide. By forming an alumina surface oxide |
|||
|
Source: Oak Ridge National Laboratory Fossil Energy Program |
|||
|
Collection: Fossil Fuels |
|||
| 15 | Texture analysis of deformation induced martensite in an AISI 301L stainless steel: microtexture and macrotexture aspects. | ||
|
Summary: in a metastable AISI 301LN austenitic stainless steel, deformed by uniaxial tension applied along rolling... of martensite in austenitic stainless steels. The amount of martensite depends on processing parameters... been proposed for austenitic stainless steels ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 16 | Figure 5.19. Light micrographs showing the microstructure of duplex rolled metal IC381 solution treated at 1300 C for 26 hours and then quenched into | ||
|
Summary: ON THE FERRITE/AUSTENITE BALANCE 6.1 Introduction The essential reason for the success of duplex stainless steels... is their higher strength and better corrosion resistance when compared with austenitic stainless steels. Moreover... , ferrite and austenite are the only phases which are ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 17 | Analysis of deformation induced martensitic transformation in stainless steels | ||
|
Summary: of applied stress. Keywords: Austenitic stainless steels, Stress induced transformation, Strain induced... that the crystallographic texture due to martensitic transformation can be predicted for 18/8 austenitic stainless steel... of stress induced martensitic transformation.10 In a particular study where ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 18 | Neural Networks: A set of four case studies Stephane Forsik | ||
|
Summary: . · Neural network model of creep strength of austenitic stainless steels (T. Sourmail et al. [2]): the 104... neural network for modelling and prediction of ferrite number in austenitic stainless steel welds (M... . Vasudevan et al. [4]): the ferrite volume fraction in austenitic ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 19 | Thermal Stability of Retained Austenite in Bainitic Steel: an in situ study | ||
|
Summary: characterization of ion-implanted austenitic stainless steel. Surface and Coating Technology 195, 816. Matsumura... Thermal Stability of Retained Austenite in Bainitic Steel: an in situ study By A. Saha Podder, I... ferrite and carbonenriched re- tained austenite has been investigated in an effort to ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 20 | J PHYS. IV FRANCE 7 (1997) Colloque C5, Supplement au Journal de Physique 111de novembre 1997 | ||
|
Summary: Microscopical Characterisationof Martensite Formation in a Metastable Austenitic Stainless Steel G. Fourlaris... , and modified magnetic characteristics. 302 type metastable austenitic stainless steel after solution treatment... 's field, as well as low remanence and coercivity). ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 21 | JOURNAL DE PHYSIQUE IV Colloque C4, suppltment au Journal de Physique 111,Volume 4, avril 1994 | ||
|
Summary: Austenitic stainless steels layers depositedby laser cladding on a mild steel: realizationand... favourable to prevent hot cracking of the austenitic stainless steels layers. The corrosion resistance... and AISI 316 austenitic stainless steels on a carbon steel ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 22 | Severe deformation (/) interface is obstructed by the defects. | ||
|
Summary: sites and hence promote nucleation, the movement of the martensite-austenite Severely defor stainless... -known that stainless steels such as 316L are in a metastable state when they are fully austenitic. Equilibrium requires... ,4,5,6,7,8,9,10,11,12 30 February 2007 Wire Industry T extiles woven using ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 23 | JOURNALDE PHYSIQUE IV Colloque C8, supplkment au Journal de Physique 111,Volume 5, dkcembre 1995 C8-515 | ||
|
Summary: of stainless steel. Metastable austenitic alloys (alloys which undergo a deformation-induced transformation... -515 The Effect of Nitrogen on Martensite Formation in a Cr-Mn-Ni Stainless Steel T. Biggs and R.D. Knutsen... of nitrogen (0 to 0.27 wtYo) on martensite formation in an experimental low-nickel ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 24 | PublishedbyManeyPublishing(c)IOMCommunicationsLtd Crystallography of Widmanstatten austenite in | ||
|
Summary: of austenite. Keywords: Duplex stainless steels, Welding, Crystallography, Texture Introduction The combination... of Widmansta¨tten austenite in duplex stainless steel weld metal Science and Technology of Welding and Joining... Menezes et al. Crystallography of Widmansta¨tten ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 25 | Residual Stresses in Weldments by Neutron Diffraction | ||
|
Summary: of Residual Stress inside Materials Material: 3 Pass Weld Austenitic Stainless Steel Working Principle... -Cr-Ni systems. Austenitic stainless steel is used in many nuclear reactors including British Energy Gas Cooled... 1600 Transvers Normal Longitudinal Stress Distance in mm Weld Region Background: ... |
|||
|
Source: Bandara, Arosha - Faculty of Mathematics, Computing and Technology, Open University |
|||
|
Collection: Computer Technologies and Information Sciences |
|||
| 26 | ECE 331 -Biomedical Instrumentation Department of Electrical & Computer Engineering, UBC Stainless Steel & Surgical Instruments | ||
|
Summary: Stainless Steel & Surgical Instruments Due: Start of NEXT Class (collect all data during lab) Name... . The scalpel blade must be: Ferrite Austenite Martensite 3. The implant contains: Fe Cr Ni C/N Mo 4... . The implant must be: Ferrite Austenite Martensite 5. The hemostat contains: Fe Cr Ni C/N Mo 6. The hemostat |
|||
|
Source: Pulfrey, David L. - Department of Electrical and Computer Engineering, University of British Columbia |
|||
|
Collection: Energy Storage, Conversion and Utilization ; Engineering |
|||
| 27 | Master thesis Modelling of Microstructure in | ||
|
Summary: austenite formation. Paraequilibrium thermodynamic calculations show that the substitution of Si by P has... these temperatures to appreciably higher values and effectively eliminates the presence of a fully austenitic region... for diffusion-controlled growth Austenite Cementite R Retained austenite ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 28 | This is the documentation for the database used to train the neural network models, as described in chapter 8. | ||
|
Summary: the short-term (yield and ultimate tensile strength) mechanical properties data on austenitic stainless... (NRIM, Japan). Further Comments None. Keywords materials, data, austenitic stainless steel, neural... , as described in chapter 8. Data Library MAP_DATA_AUSTENITIC_STMECH 1. ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 29 | 1. Introduction The focus of the work presented in the initial chapters is to explore the factors that affect the | ||
|
Summary: that affect the tensile properties of austenitic stainless steels, including the yield strength (or 0.2% proof... have incorporated austenitic stainless steel into their new twin drum washing machine, Contrarotator... solution and precipitation hardening. 1.1 Austenitic ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 30 | Research aim : Measurement of internal stresses accurately using neutron diffraction using ENGIN-X, neutron diffractometer at ISIS Facility, UK | ||
|
Summary: -resistant filler material (Alloy-52) joining the austenitic stainless steel and ferritic steel by AREVA NP... length as a shift in Bragg angle, Austenitic stainless steel Low alloy ferritic steel Alloy 52 L0 L d0 d... Atom Austenite 3.5935 3.594 3.5945 3.595 3.5955 3.596 3.5965 3.597 ... |
|||
|
Source: Bandara, Arosha - Faculty of Mathematics, Computing and Technology, Open University |
|||
|
Collection: Computer Technologies and Information Sciences |
|||
| 31 | S T A I N L E S S S T E E L W O R L D O C T O B E R 2 0 0 2 www.stainless-steel-world.net16 i l & G a sO | ||
|
Summary: from the melt, low carbon martensitic stainless steels first solidify as -ferrite followed by austenite... substructure. The latter is consistent with the observation made on a range of austenitic stainless steels... encountered in austenitic stainless steels ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 32 | (will be inserted by the editor) Dual Orientation and Variant Selection during Diffusional | ||
|
Summary: Transformation of Austenite to Allotriomorphic Ferrite Dae Woo Kim · DongWoo Suh · R. S. Qin · H. K. D. H... . Bhadeshia Received: date / Accepted: date Abstract The crystallographic relationship between austenite... for the ferrite to adopt a favoured orientation relationship with both of the austenite grains with which |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 33 | JOURNAL DE PHYSIQUE IV Colloque C1, suppldment au Journal de Physique 111,Volume 6,janvier 1996 | ||
|
Summary: -hardenable austenitic steels based on A286 steel were designed to have a constant 1300 MPa yield strength, varying... of Narutani, Olson and Cohen [I71 is based on criticalexperiments on a series of austenitic stainless steels... -141. 3.2 Strain-Induced Transformation In homogeneous ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 34 | -TRIPSteel2010Yi,Hongliang Thesis for Doctor of Philosophy | ||
|
Summary: . Bhadeshia, Mechanical Stabilisation Phenomenon of Retained Austenite in -TRIP Steel. to be submitted... and retained austenite in the microstructure. -TRIP steel contains a small amount of silicon to avoid surface... cooling conditions. The solid-state transformation of -ferrite into austenite occurs without the required |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 35 | Effect of d-ferrite on impact properties of supermartensitic stainless steel | ||
|
Summary: Austenite 3 311 Carrouge et al. Effect of d-ferrite on impact properties of supermartensitic stainless steel... Effect of d-ferrite on impact properties of supermartensitic stainless steel heat affected zones D... of the presence of non-equilibrium d-ferrite on the impact properties of a supermartensitic ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 36 | Hyperfine Interact (2006) 170:131143 DOI 10.1007/s10751-006-9463-6 | ||
|
Summary: overlayer (ranging between 17(1) nm and 6.1 m) on a 304 stainless steel substrate, through CEMS and XBS... . The difference between the Mössbauer patterns of non-magnetic stainless steel and magnetic iron motivates... of the stainless steel signal vs. Fe overlayer thickness for conversion electrons. The K-conversion electrons |
|||
|
Source: Ryan, Dominic - Physics Department, McGill University |
|||
|
Collection: Physics |
|||
| 37 | JOURNAL DE PHYSIQUE IV ColIoque C3, supplkment au Journal de Physique 111,Volume4, fkvrier 1994 | ||
|
Summary: Mechanism of austenitic transformation in the martensitic stainless steel of type PH 15-5 H.R. HABIBI... , 91405 Orsay,France Abstract :By dilatometric analysisand TEM experiments,the martensite(M)+austenite (y... in two steps. Detailed analysis of the diffusion processes controlling the two stages of the ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 38 | Variant selection in samples of austenitic stainless steel cold | ||
|
Summary: Variant selection in samples of austenitic stainless steel cold rolled and deformed by tension... austenitic stainless steels such as AISI- 304L and 301L partially transform to martensite when deformed. #12... Tensor for deformation in a tension test Tensor for deformation by cold rolling ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 39 | Martensite ? austenite phase transformation kinetics in an ultrafine-grained metastable austenitic stainless steel | ||
|
Summary: -grained austenitic stainless steel. The model shows that the presence of interstitial nitro- gen and heavy cold... . All rights reserved. Keywords: Austenite; Martensite; Stainless steel; Phase transformation kinetics 1... austenitic stainless steel, in order to ... |
|||
|
Source: Ferreira, Paulo J. - Department of Mechanical Engineering, University of Texas at Austin |
|||
|
Collection: Materials Science ; Engineering |
|||
| 40 | Strain-Induced Transformation of Very Strong Metal Mohamed Youssef Sherif | ||
|
Summary: Mateo, T. Sourmail and H. K. D. H. Bhadeshia, Stability of Retained Austenite in TRIPAssisted Steels... as an attempt to represent quantitatively the strain-induced transformation behaviour of austenite... time allows the estimation of the amount of austenite transformed as a function of plastic strain |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 41 | Mechanical stabilisation of austenite S. Chatterjee1 | ||
|
Summary: : Mechanical stabilisation, Martensite, Bainite, Austenitic stainless steels, Dislocations Introduction... , beginning with austenitic stainless steels alloys 14 as listed in Table 2. The reason for varying... strengthening and for a variety of temperatures. Austenitic ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 42 | Assessment of the Corrosion, Stress Corrosion Cracking and Embrittlement Susceptibility of 30313 Storage Containers | ||
|
Summary: and low alloy steels states that "austenitic stainless steels are satisfactory at all temperatures... . Therefore, it may be inferred that austenitic stainless steels are safe for hydrogen storage to 250o C... controversy in the literature regarding some aspects of hydrogen embrittlement (HE) of ... |
|||
|
Source: Los Alamos National Laboratory, Materials Science and Technology Division, Materials Corrosion & Environmental Effects Lab. |
|||
|
Collection: Materials Science |
|||
| 43 | PublishedbyManeyPublishing(c)IOMCommunicationsLtd Stainless steel weld metal designed to | ||
|
Summary: was to develop a corresponding alloy for welding austenitic stainless steels. The weld metal must therefore... ) the solidification of stainless steels is classified as austenitic or ferritic when the liquid com- pletely freezes... ?3 1?6 0?5 ... ... 0?7 Austenitic ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 44 | By: Leif Karlsson, ESAB AB, Gothenburg. The large and steadily growing family of stainless steels can offer unique combina- | ||
|
Summary: . The Many of today's martensitic, ferritic, austenitic and ferritic-austenitic stainless consumable, types... 3..Two examples of submerged arc welds in 8 and 25 mm 18%Ct; 8%Ni austenitic stainless steels from... , or if suitable welding consumables are not available. A trend in ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 45 | Tempering of a Mixture of Bainite and Retained Austenite | ||
|
Summary: Tempering of a Mixture of Bainite and Retained Austenite By Arijit Saha Podder St. John's College... D H Bhadeshia, Thermal Stability of Austenite Retained in Bainitic Steels, Materials Science... as brittle cemen- tite instead partitions into the residual austenite, allowing the latter to be retained |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 46 | Application of Bayesian Neural Network for modeling and prediction of ferrite number in austenitic stainless steel welds | ||
|
Summary: in austenitic stainless steel welds M. Vasudevan, M. Murugananth*, and A.K. Bhaduri Materials Joining Section... the influence of compositional variations on ferrite content for the austenitic stainless steel base... content in austenitic stainless steel welds based ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 47 | This is the documentation for the UTS neural network, as described in chapter 8. Program MAP_NEURAL_AUSTENITIC_UTS | ||
|
Summary: To estimate the UTS of austenitic stainless steels at particular temperatures as a function of chemical... MAP_NEURAL_AUSTENITIC_UTS 1. Provenance of code. 2. Purpose of code. 3. Specification. 4. Description |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 48 | This is the documentation for the yield strength neural network, as described in Program MAP_NEURAL_AUSTENITIC_YIELD | ||
|
Summary: 2002 #12; Purpose To estimate the yield strength of austenitic stainless steels at particular... 8. Program MAP_NEURAL_AUSTENITIC_YIELD 1. Provenance of code. 2. Purpose of code. 3. Specification |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 49 | WELDING RESEARCH -s281WELDING JOURNAL | ||
|
Summary: on Stainless Steel Weld Microstructures A method of producing austenitic welds is proposed that can potentially... mode (austenite) as 310 stainless steel in order to use the expression above to es- timate the cooling... rate. Although austenitic stainless steels ... |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 50 | JOURNAL DE PHYSIQUE CoZZoque C4, suppZe'rnent au n o 12, Tome 43, de'cembre 1982 page C4-423 | ||
|
Summary: -423 KINETICS OF a'-MARTENSITEFORMATION DURING FATIGUE DEFORMATION IN METASTABLE AUSTENITIC STAINLESS STEEL K... , on the kinetics of a'-martensite formation in metastable austenitic stainless steel during the total strain... . Experimental Procedure AISI type 304 (18Cr-9Ni) and type 310 (25Cr-20Ni) ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 51 | 1. Introduction It has been discovered that bainite with an ultimate ten- | ||
|
Summary: . Technol., 11 (1995), 874. 14) F. Maratray: High Carbon Manganese Austenitic Stainless Steels... plates (2040 nm thickness) and the fine-scale dispersion of austenite between the plates, obtained... accompanying the austenite (g) to ferrite (a) transformation. This has to be done without compromising |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 52 | JOURNAL DE PHYSIQUE C o l l o q u e CS, suppl6ment au nO1l, Tome 49, novembre 1988 | ||
|
Summary: . For this purpose the 475 'C embrittlementof two duplex austenitic-femtic stainless steel alloys containing low... STUDY OF 475OC EMBRITTLEMENT OF DUPLEX STAINLESS STEELS G. WAHLBERG and G.L. DUNLOP D e p a r t m e n... Abstract -The decompositionofferrite during 475 'C embrittlement of duplex stainless ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 53 | WELDING RESEARCH -S289WELDING JOURNAL | ||
|
Summary: -Enriched Stainless Steel Austenitic Alloys Solid-State Transformation Weldability Ductility Solidification Cracking... observed. It is known that a very limited quantity of Gd- alloyed austenitic stainless steel was pro- duced... and austenite in stainless steels ... |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 54 | Scripta Materialia 57 (2007) 869872 Crystallographic Texture and | ||
|
Summary: that in deformed austenitic stainless steels, the trans- formation texture should be calculated in twostages [1... In a recent study the crystallographic texture of an austenitic stainless steel which trans- formed into body... evolution in austenitic stainless ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 55 | ORNL-TIL -1-April 2009 Historical List of Publications | ||
|
Summary: the Origin of Deformation Microstructures in Austenitic Stainless Steel: Part I - Microstructures," Acta... , "On the Origin of Deformation Microstructures in Austenitic Stainless Steel: Part II - Mechanisms... , "Origin of Hardening and Deformation Mechanisms in Irradiated 316LN ... |
|||
|
Source: Oak Ridge National Laboratory, Metals and Ceramics Division, Nuclear Materials Science and Technology Group |
|||
|
Collection: Materials Science |
|||
| 56 | JOURNALDE PHYSIQUEIV ColloqueC8, supplCment au Journal de PhysiqueIII,Volume 5, dkcembre 1995 | ||
|
Summary: )technique and MartensiteStart (Ms) temperature measurementsby dilatometryperformed after partial austenite... correlatedwith the residual interstitial (C+N) concentration in solid solution of the non transformed austenite... austeniteduringboth isothermal and anisothermal (i.e. duringcontinuous coolingfrom the auste~tephase field) ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 57 | WELDING RESEARCH -s55WELDING JOURNAL | ||
|
Summary: corrosion conditions that require the use of austenitic stainless steels. A dissimi- lar metal weld (DMW... to a carbon con- centration gradient across the DMW joint. Austenitic stainless steels exhibit a high... expansion (CTE) of austenitic stainless steels are ~ ... |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 58 | Thesis for Doctor of Philosophy Variant selection of Allotriomorphic | ||
|
Summary: selection during diffusional transformation of austenite to allotriomorphic ferrite. Journal of Materials... The orientation of crystals of allotriomorphic ferrite in austenite has been investigated in order to understand... seek to adopt an orientation which matches well with all the adjacent austenite grains |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 59 | JOURNAL DE PHYSIQUE IV ColloqueC7,supplkment au Journalde Physique 111,Volume3,novembre 1993 | ||
|
Summary: [I]. Surface alloys thus obtained were austenitic stainless steels with an excellent uniform... The corrosion properties of the laser deposited 18-10austenitic stainless steel clad layers have been tested... , Switzerland ABSTRACT The present work reports on 18-10stainless steel coatings ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 60 | Fatigue-Crack Growth Behavior in the Superelastic and Shape-Memory Alloy Nitinol | ||
|
Summary: for superelastic austenite, n 1.2, p 2, were again nominally similar indicating a balanced material, 304 stainless... at 37 C. The titanium and Ti-6Al-4V, austenitic stainless steel, and CoCrdata reveal that the material... was characterized in stable austenite (at 120 C), superelastic ... |
|||
|
Source: Ritchie, Robert O. - Lawrence Berkeley National Laboratory |
|||
|
Collection: Materials Science |
|||
| 61 | Phase Transformations and Microstructural Evolution of Mo-Bearing Stainless Steels | ||
|
Summary: Phase Transformations and Microstructural Evolution of Mo-Bearing Stainless Steels T.D. ANDERSON, J... Transformations and Microstructural Evolution of Mo-Bearing Stainless Steels T.D. ANDERSON, J.N. DUPONT, M... .J. PERRICONE, and A.R. MARDER The good corrosion resistance of superaustenitic stainless steel (SASS) alloys |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 62 | JOURNALDE PHYSIQUEIV Colloque C7, supplement au Journal de Physique111,Volume 3, novembre 1993 | ||
|
Summary: material representing a natural composite is a duplex austenitic-ferritic stainless steel. Various... of femtic and austenitic grains in fatigued duplex stainless steel [I11revealed features characteristicfor... , polycrystals and in a duplex austenitic-ferritic stainlesssteel, in ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 63 | HIGH CREEP-STRENGTH ALLOYS P.J. Maziasz, J.P Shingledecker, R.W. Swindeman, R.L. Klueh and N.D. Evans | ||
|
Summary: , austenitic stainless steels and nickel-based superalloys. One fundamental premis here is that better... austenitic stainless steels based on modifications of type 347 stainless steel (cast grade is CF8C); b... AUSTENITIC STAINLESS STEELS Wrought ... |
|||
|
Source: Oak Ridge National Laboratory Fossil Energy Program |
|||
|
Collection: Fossil Fuels |
|||
| 64 | Overview of Alumina-Forming Austenitic (AFA) Stainless Steel Development | ||
|
Summary: Overview of Alumina-Forming Austenitic (AFA) Stainless Steel Development M.P. Brady, Y. Yamamoto, M... Cost to High-Ni Austenitics/Ni-Base Alloys EstimatedCostRelative to347StainlessSteel AFAHP HR120® 625... USA 37831-6115 Further Information: Bradymp@ornl.gov Aug 11, 2010 #12;Stainless ... |
|||
|
Source: Pint, Bruce A. - Materials Science & Technology Division, Oak Ridge National Laboratory |
|||
|
Collection: Materials Science |
|||
| 65 | A Study of Austenite Precipitate Growth in Duplex Stainless Steel A Research Performance Evaluation | ||
|
Summary: A Study of Austenite Precipitate Growth in Duplex Stainless Steel A Research Performance Evaluation... and a variety of methods are examined in the context of austenite precipitation from ferrite in a duplex... stainless steel. Current State of Knowledge The velocity of an interface during a phase ... |
|||
|
Source: McGaughey, Alan - Department of Mechanical Engineering, Carnegie Mellon University |
|||
|
Collection: Engineering ; Materials Science |
|||
| 66 | Development of Gd-Enriched Alloys for Spent Nuclear Fuel Applications--Part 1: Preliminary Characterization | ||
|
Summary: / austenite matrix with interdendritic (Fe, Ni, Cr)3Gd. As previ- ously indicated, the 1992 WRC stainless... levels were set at 0.03 wt.% maximum and are similar to conventional low carbon austenitic stainless... in the austenitic or ferritic matrix of stainless ... |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 67 | Development of Alumina-Forming Austenitic (AFA) Stainless Steels | ||
|
Summary: Development of Alumina-Forming Austenitic (AFA) Stainless Steels Michael P. Brady, Yukinori... Structural Alloy for Use from 600-900°C · Approach: Al2O3-forming austenitic stainless steels -background... ;Challenge of Alumina-forming Austenitic (AFA) Stainless Steel ... |
|||
|
Source: Oak Ridge National Laboratory Fossil Energy Program |
|||
|
Collection: Fossil Fuels |
|||
| 68 | HallPetch Behavior in Ultra-Fine-Grained AISI 301LN Stainless Steel | ||
|
Summary: , L.P. KARJALAINEN, and A. KYRO¨ LA¨ INEN An ultra-fine-grained AISI 301LN austenitic stainless steel... The Minerals, Metals & Materials Society and ASM International 2007 I. INTRODUCTION AUSTENITIC stainless steels... annealed at 800 °C and 900 °C, respec- tively. As the strength of ... |
|||
|
Source: Ferreira, Paulo J. - Department of Mechanical Engineering, University of Texas at Austin |
|||
|
Collection: Materials Science ; Engineering |
|||
| 69 | Crystallographic Texture of StressAffected Bainite | ||
|
Summary: transformation has been demonstrated for austenitic stainless steel deformed in tension (Kundu and Bhadeshia... to hinder the progress of growing plates. For example, it has been shown that when an austenitic stainless... the martensitic transformation texture in an austenitic ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 70 | CANADIAN METALLURGICAL QUARTERLY HOT WORKABILITY OF 2304 AND 2205 DUPLEX | ||
|
Summary: to the steady state of classical DRX as observed in homogenized austenitic stainless steels [17,25-33]. At low... . In austenitic stainless steels, the inter- pass softening was very high at 1200 °C due to SRX, but was only 30... enhanced the duc- tility in the multistage tests but much less than in ... |
|||
|
Source: Niewczas, Marek - Department of Materials Science and Engineering, McMaster University |
|||
|
Collection: Materials Science |
|||
| 71 | Materials Science and Engineering A311 (2001) 162173 Estimation of the amount of retained austenite in austempered | ||
|
Summary: ) 245250. [45] S.K. Putatunda, P.K. Gadicherla, Mater. Sci. Eng. A286 (1999) 1531. [46] P. Prasad, S... austenite in austempered ductile irons using neural networks M.A. Yescas a , H.K.D.H. Bhadeshia a, *, D... of austempered ductile iron depend on the austenite which is retained following the bainite ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 72 | 100 150 200 250 300 350 10 15 20 25 | ||
|
Summary: (2001). [2] J.M. Priest et al., Low Pressure r.f. nitriding of austenitic stainless steel... -nitrided austenitic stainless steel . Dose-dependent measurements (Figure 4) for several samples confirm... Preparation: Several samples of austenitic stainless steel were ... |
|||
|
Source: Timmers, Heiko - School of Physical, Environmental and Mathematical Sciences, Australian Defence Force Academy, University of New South Wales |
|||
|
Collection: Physics ; Materials Science |
|||
| 73 | Tensile Properties of Austenitic Stainless Steel | ||
|
Summary: Tensile Properties of Austenitic Stainless Steel by Iqbal Shah Corpus Christi College, Cambridge... ; Abstract The shortterm mechanical properties of austenitic stainless steels can be affected by a myriad... , in an attempt to find compositions of a similar tensile strength for ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 74 | Det&rmlrvatton af AuetenH vs. a-ferrlt Hi Steel by Neutron | ||
|
Summary: ^A« Lfb«rit*fy, 3&-4*00 K M W W # , Qvnmfk JAH« t f » 4 #12;RISØ-M-2439 DETERMINATION OP AUSTENITE vs. a... . Neutron and X-ray diffraction studies for deteririning the relative content of fee (austenite) and bec (a... Physics Division at Risø National Laboratory. INIS descriptors; AUSTENITE; NEUTRON DIFFRACTION; QUALITY |
|||
|
Source: Risø National Laboratory |
|||
|
Collection: Multidisciplinary Databases and Resources |
|||
| 75 | Selecting and Developing Advanced Alloys for Creep-Resistance for Microturbine Recuperator Applications | ||
|
Summary: at 750 o C and 100 MPa were determined for a range of austenitic stainless alloys made into 0.1 mm foils... current compact recuperators are manufactured from austenitic stainless steels like type 347 or from heat... connectors. CONCLUSIONS A group of heat-resistant and oxidation/corrosion resistant ... |
|||
|
Source: Pint, Bruce A. - Materials Science & Technology Division, Oak Ridge National Laboratory |
|||
|
Collection: Materials Science |
|||
| 76 | PublishedbyManeyPublishing(c)IOMCommunicationsLtd Fatigue of extremely fine bainite | ||
|
Summary: in metastable austenitic stainless steels: effect on fatigue crack growth rate', J. Mater. Eng. Perform., 1996... retained austenite. The resulting large density of interfaces makes the alloy very strong in its... melting technique. Keywords: Fatigue, Bainite, Nanostructure, Inclusions, Retained austenite ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 77 | JOURNALDE PHYSIQUE IV Colloque C7,supplkmentau Journal de Physique 111,Volume 3, novembre 1993 | ||
|
Summary: austenitic alloys FeNi36, FeNi36NbC and austenitic stainless steel AISI 304 after hot deformation was studied... The influence of deformation rate on recrystallization kinetics of austenitic alloys E? ZUNA Faculty |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 78 | Phase Transformations during Spot Welding of InterstitialFree Steel | ||
|
Summary: that eventually forms the nugget. For example, the resistance spot welding of austenitic stainless steel... . Dasgupta, and S. A. David. Microstructural modification of austenitic stainless steels by rapid... steel and 304 austenitic stainless steel. Journal of ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 79 | Some European Developments in Welding Consumables L. Karlsson | ||
|
Summary: corrosive environments and high temperatures. A trend in both austenitic and duplex stainless steel... presented here was to develop a corresponding alloy for welding austenitic stainless steels. The weld metal... . D. H. Bhadeshia, and P. M. Kelly. .: Crystallography of widmanst¨tten ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 80 | Effect of Composition on the Formation of Sigma during Single-Pass Welding of Mo-Bearing Stainless Steels | ||
|
Summary: and superaustenitic stainless steels, where microsegrega- tion during primary c-austenite solidification results in Mo... Effect of Composition on the Formation of Sigma during Single-Pass Welding of Mo-Bearing Stainless... -bearing stainless steel compositions ranging from 0 to 10 wt pct Mo and over a broad ... |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 81 | UT-BATTELLEOak Ridge National Laboratory U.S. Department of Energy | ||
|
Summary: , Stainless Steels And exhaust valves, and any other Various Austenitic components where superalloys Stainless... And Experience in Developing High-Performance Stainless Steels And Alloys · Cast CN12 and CF8C exhaust manifold |
|||
|
Source: Pint, Bruce A. - Materials Science & Technology Division, Oak Ridge National Laboratory |
|||
|
Collection: Materials Science |
|||
| 82 | Bainite Orientation in Plastically Deformed Austenite International Journal of Materials Research 100 (2009) 40-45. | ||
|
Summary: of martensite in austenitic stainless steel. Journal of the Iron and Steel Institute, 181:165174, 1954. [12] G... Bainite Orientation in Plastically Deformed Austenite International Journal of Materials Research... deformed austenite which is otherwise free from externally applied stress. It is demonstrated ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 83 | Austenitic stainless steels and high strength copper alloys for fusion components | ||
|
Summary: Austenitic stainless steels and high strength copper alloys for fusion components A.F. Rowclie a... .O. Box 999, Richland, WA 99352, USA Abstract An austenitic stainless steel (316LN), an oxide... -layer interface. Ó 1998 Elsevier Science B.V. All rights reserved. 1. Introduction ... |
|||
|
Source: Oak Ridge National Laboratory, Metals and Ceramics Division, Nuclear Materials Science and Technology Group |
|||
|
Collection: Materials Science |
|||
| 84 | 9 From Bainite to Austenite Many commercial processes cause the steel to revert into the austenitic condi- | ||
|
Summary: 9 From Bainite to Austenite Many commercial processes cause the steel to revert into the austenitic... for austenite formation increase as a ferritic microstructure is superheated. The rate of transformation... to a low temperature where the lack of atomic mobility prevents further transformation. Austenite ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 85 | Swagelok Center for Surface Analysis of Materials (SCSAM) at Case | ||
|
Summary: 316L stainless steel thin foil. The BF image reveals heavily dislocated austenite, labeled... software for identifying phases XRD scans obtained from a carburized 316L austenitic stainless steel... of Carburized 316L Stainless Steel S Mn counts keV S Mn counts keV SEM image and XEDS ... |
|||
|
Source: Dormidontova, Elena E. - Department of Macromolecular Science and Engineering, Case Western Reserve University |
|||
|
Collection: Engineering ; Materials Science |
|||
| 86 | 10. Conclusions and Future Work The aim of the project was to create neural network models to characterise the | ||
|
Summary: to characterise the mechanical properties of austenitic stainless steels. From this work, a genetic algorithm... of austenitic stainless steel were outlined, including everyday uses. It was also shown that there are many |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 87 | Experimental Investigation of the Wear Behavior in Surface Modified NiTi Lizhen Tane, Wendy C. Cronee%, Erik H. Wilson@+, Kumar Sridharan* | ||
|
Summary: the temperature window where pseudoelastic transformation of the austenite phase is possible. Cyclic mechanical... from 240 to 1000 grit followed by a 1 micron diamond lapping compound. To produce the austenitic phase... in the furnace. The austenite finish temperature (Af) was determined by Differential Scanning Calorimetry ... |
|||
|
Source: Crone, Wendy C. - Department of Engineering Physics, University of Wisconsin at Madison |
|||
|
Collection: Materials Science |
|||
| 88 | STEEL 212. 0,3 % C Cr Ni Mo LOW ALLOY STEEL Steel 212 43 | ||
|
Summary: '(s) Liquidus temperature, austenitic primary phase, QC Liquidus temperature, ferritic primary phase, QC CD... Temperature of austenite formation, QC CD Solidus temperature, QC CD Solidification range, QC Solidification... Rate,R, rC/s) 2,0 0,5 0,1 Liquidus temperature, ferritic primary phase, °C CD Temperature of austenite |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 89 | Wear 260 (2006) 509522 Role of phase transition in the unusual microwear behavior of | ||
|
Summary: -materials such as stainless steel AISI 304 and that the material exhibits unusual hardness dependence of wear within certain... -temperature martensite phase and the high-temperature austenite phase. In most applications of NiTi, the stress... temperatures on cooling), Ms, Mf (martensite start and finish temperatures on cooling), As and Af ... |
|||
|
Source: Sun, Qing-Ping - Department of Mechanical Engineering, Hong Kong University of Science and Technology |
|||
|
Collection: Materials Science ; Engineering |
|||
| 90 | WELDING RESEARCH -S25WELDING JOURNAL | ||
|
Summary: , stainless steels, and Ni-based superalloys. Stress- relief cracking occurs primarily in the coarse... precipitation con- trolled the stress-relief cracking susceptibility. Cracking initiated at prior austenite... EDS traces taken across prior austenite grain boundaries. In addi- tion, SE STEM imaging with the VG |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 91 | Tensile Properties of Austenitic Stainless Steel | ||
|
Summary: Tensile Properties of Austenitic Stainless Steel by Iqbal Shah Corpus Christi College, Cambridge... ;Abstract The short-term mechanical properties of austenitic stainless steels can be affected by a myriad... , in an attempt to find compositions of a similar tensile strength for austenitic ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 92 | A creep model for austenitic stainless steels incorporating cavitation and wedge cracking | ||
|
Summary: A creep model for austenitic stainless steels incorporating cavitation and wedge cracking S Mahesh... , Kalpakkam 603102. India Abstract. A model of damage evolution in austenitic stainless steels under creep... experimental data for a type 316 austenitic stainless ... |
|||
|
Source: Mahesh, Sivasambu - Department of Aerospace Engineering, Indian Institute of Technology Kanpur |
|||
|
Collection: Engineering |
|||
| 93 | Neural network model of creep strength of austenitic stainless steels | ||
|
Summary: Neural network model of creep strength of austenitic stainless steels T. Sourmail, H. K. D. H... . Bhadeshia, and D. J. C. MacKay The creep rupture life and rupture strength of austenitic stainless steels... M Communications Ltd. Introduction Austenitic stainless steels ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 94 | Paper GT2004-54239 for 2004 Turbo Expo Austenitic Stainless Steels and Alloys With Improved High-Temperature | ||
|
Summary: Paper GT2004-54239 for 2004 Turbo Expo Austenitic Stainless Steels and Alloys With Improved High... -resistant austenitic stainless at 700-800 o C [15,16]. Therefore it was also included in these most recent ORNL creep... , but the combination of Mn and Cu with Nb + N is unique. Several other advanced ... |
|||
|
Source: Pint, Bruce A. - Materials Science & Technology Division, Oak Ridge National Laboratory |
|||
|
Collection: Materials Science |
|||
| 95 | Form No. 836 R5 ST 2629 10/91 | ||
|
Summary: , it appears that little information exists on the failure of austenitic stainless steels exposed to Ga... Austenitic stainless steels have been shown to be LM embrittled by Zn (T > 490°C). Also, LME by Ga has been... , and waste type. Potential for Embrittlement of Stainless Steel ... |
|||
|
Source: Los Alamos National Laboratory, Materials Science and Technology Division, Materials Corrosion & Environmental Effects Lab. |
|||
|
Collection: Materials Science |
|||
| 96 | JOURNAL DE PHYSIQUE Colloque C10, suppl6ment au n012, Tome 46, d6cembre 1985 page C10-795 | ||
|
Summary: from isotropic to transverse isotropic. I - INTRODUCTION Cast austenitic stainless steel and weld mtal... . J. Reimann, "Ultrasonic Wave Propagation and hisotropy in Austenitic Stainless Steel Weld Metal... -795 VISUALIZATION OF ULTRASONIC-BEAM DISTORTION IN ANISOTROPIC STAINLESS STEEL ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 97 | Gas Carburization of Thin-Walled Austenitic Stainless Steel Formed via the Reduction of Metal Oxide Extrusions | ||
|
Summary: Gas Carburization of Thin-Walled Austenitic Stainless Steel Formed via the Reduction of Metal Oxide... of 316L austenitic stainless steel by means of extrusion, reduction, and gas carburization... with constant carbon composition. In the case of stainless steels, the protective layer of ... |
|||
|
Source: Li, Mo - School of Materials Science and Engineering, Georgia Institute of Technology |
|||
|
Collection: Materials Science |
|||
| 98 | Characterisation and Development of Nanostructured, Ultrahigh | ||
|
Summary: of carbon depleted and carbon- rich austenite and their response to strain, grain rotation, anisotropy... to Bainite . . . . . . . . . . . . . 11 1.6 Stability of the Retained Austenite... . . . . . . . . . . . . . . . . . . . . . . 55 3.7.5 Austenite Carbon Content . . . . . . . . . . . . . . . . 59 3.7.6 Comparison with Alloy ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 99 | STAINLESS STEEL 2000 Proceedings of an International | ||
|
Summary: nitrogen and Ni. These results support a model of the kinetics of nitriding in austenitic stainless steel... of one grade of austenitic stainless steel, nitrided by exposure to a low-pressure rf plasma at elevated... AND THE NITRIDING PROCESS The material examined is AISI 316 austenitic ... |
|||
|
Source: Timmers, Heiko - School of Physical, Environmental and Mathematical Sciences, Australian Defence Force Academy, University of New South Wales |
|||
|
Collection: Physics ; Materials Science |
|||
| 100 | Bessemer Memorial Lecture The dimensions of steel | ||
|
Summary: why austenitic stainless steels cannot be used with vengeance in the construction of efficient steam... . They nevertheless determine the macroscopic behaviour. One example is that the magnetic properties of austenite... otherwise given that austenite has a greater density. This and other aspects of the ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||