| Sample search results for: a-si alloy production |
| 1 | S. Guha, J. Yang, A. Banerjee, K. Hoffman, S. Sugiyama, and J. Call United Solar Systems Corp., Troy, Michigan 48084 USA | ||
|
Summary: products which have been around for a long time, and a-Si alloy products are no exception. During the last... few years, however, several new, attractive features of a-Si alloy products have been established... resulting in a wider acceptance of ... |
|||
|
Source: Deng, Xunming - Department of Physics and Astronomy, University of Toledo |
|||
|
Collection: Renewable Energy |
|||
| 2 | Electronic properties of hydrogenated amorphous silicon-germanium alloys (+) | ||
|
Summary: : the photoresponse of the Si0.62Ge0.38 alloy is 104 times smaller than that of a-Si:H. This deterioration... and the density of gap states are about two orders of magnitude larger in a-Ge:H than in a-Si:H. Alloying C or Ge... , the SiGe alloys have a maxi- mum photoconductivity ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 3 | JOURNAL DE PHYSIQUE IV Colloque C7, supplCmentau Journal de Physique 111,Volume 3, novembre 1993 | ||
|
Summary: mechanical alloying (alloy D) had titanium. The characterization of the as-received products was carried out... oxidationof Fe-Cr-A1alloys E CLEMENDOT, E ARNOLDI, J.B. CEREDE, B. DIONNET*,E NARDOU* and J.C. VAN DUYSEN... of four industrial Fe-Cr-A1 alloys was studied. Two of them were ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 4 | Materials Science and Engineering A 460461 (2007) 392402 High temperature corrosion resistance of candidate nickel-based | ||
|
Summary: as comparison. The corrosion product on each alloy was examined and related to the weld metal composition... , developed thick corrosion products that were non-adherent and very porous. The corrosion product on alloy 33... than the products formed on ... |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 5 | Selecting and Developing Advanced Alloys for Creep-Resistance for Microturbine Recuperator Applications | ||
|
Summary: stainless steels and alloys were commercial grades obtained from production-scale plate stock that was 1... for thicker products given by the materials producers, and on experience in alloy processing at ORNL... . Clearly, alloy 230 ranks lower in relative creep resistance as a foil ... |
|||
|
Source: Pint, Bruce A. - Materials Science & Technology Division, Oak Ridge National Laboratory |
|||
|
Collection: Materials Science |
|||
| 6 | MANUFACTURING OF TRIPLE-JUNCTION 4 fe a-Si ALLOY PV MODULES M. Izu, X. Deng, A. Krisko, K. Whelan, R. Young, II. C. G-&n&y, K. L. Namsimhan and S. R. Gvshinsky | ||
|
Summary: for a-Si alloy production modules (24 ft'). Major accomplishments which produced the significant... . This is the highest efftciency achieved in any a-Si alloy production ntachine. The J-V characteristics of the solar... -reflector; *Initial aperture area mcdule ... |
|||
|
Source: Deng, Xunming - Department of Physics and Astronomy, University of Toledo |
|||
|
Collection: Renewable Energy |
|||
| 7 | MATERIALS PROBLEMS IN INCINERATION PLANTS S. BARANOW, G. Y. LAI, M. F. ROTHMAN | ||
|
Summary: performance capabilities of various possible alloy alterna tives. In this paper, it is demonstrated... ex posed to the combustion products in the incineration side. Combustions in both sections were... in the incineration section. The combustion products, which were not analyzed, are believed to con sist of N2, O2, CO2 |
|||
|
Source: Columbia University - Waste-to-Energy Research and Technology Council (WTERT) |
|||
|
Collection: Renewable Energy |
|||
| 8 | CONTINUOUS ROLL-TO-ROLL SERPENTINE DEPOSITION FOR HIGH THROUGHPUT a-Si PV MANUFACTURING | ||
|
Summary: (1994). [18] "Stability Test of 4ft2 Triple-Junction a-Si Alloy PV Production Modules", X. Deng, M. Izu... will improve the gas utilization efficiency since deposition of a-Si alloy material on the cathode is reduced... ] "Manufacturing of Triple-Junction 4 f? a-Si ... |
|||
|
Source: Deng, Xunming - Department of Physics and Astronomy, University of Toledo |
|||
|
Collection: Renewable Energy |
|||
| 9 | JOURNALDE PHYSIQUEIV Colloque C8, supplkmentau Journal de Physique111, Volume 5, dkcembre 1995 C8-391 | ||
|
Summary: is proposed as the best production condition of the Fe-17%Mn-O.O2%C alloy. 4. CONCLUSION (1) As the carbon... .%Mn Martensitic Alloy S.B. Baik, J.C. Kim, K.K. Jee*, M.C. Shin* and C.S. Choi** Woojin OSK Corp... -749, Korea ABSTRACT Effect of carbon content on damping capacity of Fe-l7%Mn alloy is investigated ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 10 | Microstructure, biocorrosion and cytotoxicity evaluations of rapid solidified Mg3Ca alloy ribbons as a biodegradable material | ||
|
Summary: alloy sample, only the corrosion products. For the three as-spun Mg3Ca 5 #12;Biomed. Mater. 5 (2010... Microstructure, biocorrosion and cytotoxicity evaluations of rapid solidified Mg3Ca alloy ribbons... and cytotoxicity evaluations of rapid solidified Mg3Ca alloy ribbons as a biodegradable material X N ... |
|||
|
Source: Zheng, Yufeng - Department of Advanced Materials and Nanotechnology, Peking University |
|||
|
Collection: Materials Science ; Biology and Medicine |
|||
| 11 | Radioisotope Power Systems Materials Production and Technology Program | ||
|
Summary: Radioisotope Power Systems Materials Production and Technology Program Alloy and Component... range of capabilities that span the entire sphere of alloy design, production, mechanical property... areas: Alloy Design, Production and Processing · Vacuum Arc Remelting ... |
|||
|
Source: Oak Ridge National Laboratory, Metals and Ceramics Division, Nuclear Materials Science and Technology Group |
|||
|
Collection: Materials Science |
|||
| 12 | PhD Opportunity with the Department of Engineering Materials and Corus Predictions of the Behaviour of Inclusions Introduced by Alloy Impurities | ||
|
Summary: performance products, safety components etc, which require more alloying elements... Predictions of the Behaviour of Inclusions Introduced by Alloy Impurities in Liquid... . The stable inclusions may result in product failures and ... |
|||
|
Source: Ojovan, Michael - Department of Engineering Materials, University of Southampton |
|||
|
Collection: Environmental Management and Restoration Technologies ; Fission and Nuclear Technologies |
|||
| 13 | the machinist mar 2007 agnesium is 36 per cent | ||
|
Summary: alloys. Reducing the automobile weights by certain amount will result in similar percentage... a combination of innovative structural design and increased use of lightweight materials. Magnesium alloys... (120 kg). Magnesium and its alloys are important for structural application and demand for them |
|||
|
Source: Medraj, Mamoun - Department of Mechanical and Industrial Engineering, Concordia University |
|||
|
Collection: Engineering |
|||
| 14 | JOURNAL DE PHYSIQUE IV Colloque 2, supplCment au Journal de Physique 111,Volume 6, mars 1996 | ||
|
Summary: 33, Rosebank MDC, Clayton, Victoria 3169,Australia Abstract. The past two decades have seen alloys... of advanced engineering alloys. This evolution, which has been achieved through a very significant research... in the early scientific studies of intermetallics but have entered the engineering intermetallic alloys field |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 15 | JOURNALDE PHYSIQUE IV ColloqueC7,supplkmentau Journalde Physique111,Volume 3, novembre 1993 | ||
|
Summary: Titanium alloys. Advances in alloys, processes, products and applications PA. BLENKINSOP Interdisciplinary... and products developments. EXISTING 'OLDER' ALLOYS The titanium alloy developers have... , allied to process/product developments, has ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 16 | JOURNAL DE PHYSIQUE Colloque C3, supplgment au n09, Tome 48, septembre 1987 | ||
|
Summary: of preprecipitation hardening (e.g. in underaged alloys) and intergranular precipitation in industrial semi-products... HARDENING IN Al-Li-Cu-Mg ALLOYS P. SAINFORT and B. DUBOST Cegedur-PBchiney, C e n t r e d e Recherche e... families governing the strength of Al-Li-Cu-Mg(-Zr) alloys within a wide ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 17 | International Conference on Advanced Materials: Cancun 2001 Design Considerations for a Hybrid AmorphousDesign Considerations for a Hybrid Amorphous | ||
|
Summary: cost a-Si and a-Si:Ge alloys can be designed with voltage and current characteristics well... -connected cells of a-Si and a-Si:Ge alloys (nip structures)used to extend collection range for photo... : WO3 with a-Si/a-Si:Ge double junction Model ... |
|||
|
Source: Hawaii Natural Energy Institute |
|||
|
Collection: Renewable Energy |
|||
| 18 | * Corresponding author. E-mail address: dengx@physics.utoledo.edu (X. Deng) | ||
|
Summary: bandgap research We deposited wide bandgap a-Si alloy solar cells having structure of SS/Ag/ZnO/ a-Si n>/a-Si... in the amorphous silicon (a-Si)-based photovol- taic research program at The University of Toledo (UT). We have... achieved the fabrication of (1) wide bandgap ... |
|||
|
Source: Deng, Xunming - Department of Physics and Astronomy, University of Toledo |
|||
|
Collection: Renewable Energy |
|||
| 19 | JOURNAL DE PHYSIQUE IV Colloque C9, suppltment auJournal de Physique 111, Volume 3, dtcembre 1993 | ||
|
Summary: , alloy C is completely oxidized Alloy C 1000 h 1 3 0 0 ~ ~ ~ Cr1,3Fe0,703 Fe203 Product Ageing... ofthreeindustrial Fe-Cr-A1alloys (withor without yttrium)at temperatures rangingbetween 1200and 1350"C. At 1200OC... , the behaviour of these alloys is improved as the yttrium content rises. ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 20 | 12th North American Waste to Energy Conference May 17-19, 2004, Savannah, Georgia USA | ||
|
Summary: .1 Waterwall tubes Alloy 50 is a Nb-free welding product that is being considered as a replacement for Alloy... -2216 Experience with Weld Overlay and Solid Alloy Tubing Materials in Waste to Energy Plants Larry Paul Thyssen... in refuse-to-energy boilers. Over the years, many different ... |
|||
|
Source: Columbia University - Waste-to-Energy Research and Technology Council (WTERT) |
|||
|
Collection: Renewable Energy |
|||
| 21 | 134 www.pv-tech.org Introduction | ||
|
Summary: Materials PV Modules Introduction Hydrogenated amorphous silicon alloys (a-Si:H) have received a great deal... thin film, thereby reducing material costs. The a-Si:H alloy is also being extensively used for large... employed an amorphous silicon- germanium alloy ... |
|||
|
Source: Schiff, Eric A. - Department of Physics, Syracuse University |
|||
|
Collection: Materials Science ; Renewable Energy |
|||
| 22 | JOURNAL DE PHYSIQUE IV Colloque C2, supplkment au Journal de Physique JII,Volume 5,fkvrier 1995 | ||
|
Summary: of the product. In Table 1the chemical composition of the memory alloysinvestigated are given. Table 1 Alloy... The Effect of Stress Ageing on the Properties of Shape Memory Alloys A.D. Michael Memory Metals Limited, 3... characteristics of shape memory alloys operating in an overtemperature shut-off valve ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 23 | technology offer Research and Transfer Support | Tanja Sovic | ||
|
Summary: alloy, which allows high compressibility and introduction into parts production without adoption... of the common technology. By reduction of melting temperatures the production route of the master alloy allows... by the production route of the master alloy. The ... |
|||
|
Source: Szmolyan, Peter - Institut für Analysis und Scientific Computing, Technische Universität Wien |
|||
|
Collection: Mathematics |
|||
| 24 | JOURNALDE PHYSIQUE IV ColloqueC7,suppl6mentau Journal de Physique111, Volume3, novembre1993 | ||
|
Summary: Magnesium alloys can be cast into products by a variety of methods including high pressure die casting, low... parameters, emphasizing the need to tailor alloys and processes to obtain the required product performance... Magnesium alloys for structural applications;recent advances H. ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 25 | JOURNAL DE PHYSIQUE Colloque C3, suppl6ment au n09, Tome 48, septembre 1987 | ||
|
Summary: , including the production of rod. When the alloy is available in this form it should Provide advantages... ALUMINIUM : A NOVEL GRAIN REFINER FOR ALUMINIUM-LITHIUM ALLOYS M.E.J. BIRCH and A.J.J. COWELL London... -Britain This work explores the possibility of achieving grain size control in aluminium-lithium ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 26 | JOURNAL DE PHYSIQUE CoZZoque C4, suppZe'ment au nOIO, Tome 42, octobre 1981 page C4-1077 | ||
|
Summary: is ro in~esiigatethe phenomena occurring ut the interface between hydrogenated amorphous Si (a-Si... there has been much interest in making a-Si:H Schottky diodes (2). 'Thus, in this work the structure... of the metal-a-Si:H interfaces are correlated with the electrical characteristics of the Schottky diodes |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 27 | SoSyM manuscript No. (will be inserted by the editor) | ||
|
Summary: , such as union(), intersection() and product() can be expressed using the equivalent Alloy set operators... UML to Alloy Kyriakos Anastasakis1 , Behzad Bordbar1 , Geri Georg2 , Indrakshi Ray2 1 School... be automatically transformed into Alloy which, in turn, can be automatically analysed by the ... |
|||
|
Source: Bordbar, Behzad - School of Computer Science, University of Birmingham |
|||
|
Collection: Computer Technologies and Information Sciences |
|||
| 28 | SEM and EPMA Analysis of Spark Plug Electrode Erosion | ||
|
Summary: . Lykowski Federal Mogul Corporation Ignition Products Toledo, OH 43607, USA #12;Background... (s) of electrode wear. Based on this insight, select alternative alloys or develop new alloys to improve erosion... Plug #12;Substantial Crack Generation and Growth Observed Between Pt-4W Alloy Insert and Ni |
|||
|
Source: Pint, Bruce A. - Materials Science & Technology Division, Oak Ridge National Laboratory |
|||
|
Collection: Materials Science |
|||
| 29 | a-Si:H-based Triple-Juncti of 10 A/s usi | ||
|
Summary: performance for the triple-junction cells. INTRODUCTION The production costs of amorphous silicon (a-Si... process since these thin layers are not rate limiting in a production process. To fabricate the a-Si... is desirable over the standard 13.56 MHz technique for high speed production ... |
|||
|
Source: Deng, Xunming - Department of Physics and Astronomy, University of Toledo |
|||
|
Collection: Renewable Energy |
|||
| 30 | New Recuperator Alloy Commercialized Affordable AL20-25+Nb Alloy Demonstrates Improved Creep and | ||
|
Summary: a group of commercial alloys for the production of more durable recuperator components. Both lab testing... New Recuperator Alloy Commercialized Affordable AL20-25+Nb Alloy Demonstrates Improved Creep... to moisture-enhanced oxidation and insufficient creep resistance; however, the new Allegheny-Ludlum (AL) ... |
|||
|
Source: Pint, Bruce A. - Materials Science & Technology Division, Oak Ridge National Laboratory |
|||
|
Collection: Materials Science |
|||
| 31 | JOURNALDE PHYSIQUEIV Colloque C7,supplkment au Journal de Physique 111, Volume 3, novembre1993 | ||
|
Summary: The correlationbetween microstructureand thermomechanical properties studied on AlCuMg-based alloys U. SCHMIDTand R... : This paper deals with the description of the structure and precipitation sequence of AlCu4.5 alloys... with a content of Mg between those of binary AlCu and quasi-binary AlCuMg alloys. For ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 32 | Isoelectronic bound-exciton photoluminescence in strained beryllium-doped Si0.92Ge0.08 epilayers and Si0.92Ge0.08 /Si superlattices at ambient and elevated hydrostatic pressure | ||
|
Summary: to the layer is zz b 2C12 C11 xx b , 3 where a and aSi are the lattice constants for the relaxed alloy and Si... .974 0.002 0.71 0.4 SL-A SiGe zero phonon 1.041 0.001 0.97 0.03 SiGe TO-phonon replicas of free excitons... bands.14,15 The biaxial strain in the plane of the layer is xx b yy b ... |
|||
|
Source: Herman, Irving P. - Department of Applied Physics and Applied Mathematics, Columbia University |
|||
|
Collection: Materials Science |
|||
| 33 | JOURNALDE PHYSIQUE IV Colloque C8, supplkment au Journal de Physique 111,Volume 5, dkcembre 1995 C8-515 | ||
|
Summary: of nitrogen (0 to 0.27 wtYo) on martensite formation in an experimental low-nickel stainless-steel alloy (Fe... -17Cr-7Mn-4Ni) has been investigated. The alloys containing 0.1 wtYo or more nitrogen are fully... and S-ferrite. The alloys containing less than 0.2 wtYo nitrogen are metastable and undergo |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 34 | Magnetic anisotropy in Fe-25Cr-12Co-1Si alloy induced by external magnetic field | ||
|
Summary: Magnetic anisotropy in Fe-25Cr-12Co-1Si alloy induced by external magnetic field ZHEN Liang( )1... properties of Fe-25Cr-12Co-1Si alloy thermo-magnetically treated under different external magnetic field... Si alloy thermo-magnetically treated with a parallel magnetic field. Key words: Fe-Cr-Co alloy |
|||
|
Source: Qin, Lu-Chang - Department of Physics and Astronomy, University of North Carolina at Chapel Hill |
|||
|
Collection: Materials Science ; Physics |
|||
| 35 | JOURNAL DE PHYSIQUE IV Colloque C4, supplkment au Journal de Physique 111,Vol. 1,novembre 1991 | ||
|
Summary: : The present study on a Cu-Al-Be alloy has given the following characteristics: the addition of small... concentration of beryllium to the eutectoidal alloy close to Cu3Al leads to a sharp decrease of the martensitic... is the M, temperature chosen, the beta phase stability will be approximately the same since the alloy |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 36 | INSTITUTE OF PHYSICS PUBLISHING JOURNAL OF PHYSICS: CONDENSED MATTER J. Phys.: Condens. Matter 16 (2004) S5265S5275 PII: S0953-8984(04)85451-1 | ||
|
Summary: -mobility measurements in hydrogenated amorphous silicon (a-Si:H), amorphous silicon alloys (a-SiGe:H and a-Si... of alloying of a-Si:H with Ge (a-SiGe:H) and C (a-SiC:H), and about `mixed phase' nanocrystalline aggregates... ... |
|||
|
Source: Schiff, Eric A. - Department of Physics, Syracuse University |
|||
|
Collection: Materials Science ; Renewable Energy |
|||
| 37 | In vitro corrosion and biocompatibility of binary magnesium alloys Xuenan Gu a | ||
|
Summary: alloys are expected to be totally degraded in the body and their biocorrosion products not deleterious... in the as-cast and as-rolled Mg1X alloys and their corrosion products after immersion. 2.3. Tensile test... adhesion is seen for the other as-rolled Mg1X alloys samples. 4. ... |
|||
|
Source: Zheng, Yufeng - Department of Advanced Materials and Nanotechnology, Peking University |
|||
|
Collection: Materials Science ; Biology and Medicine |
|||
| 38 | Journal of Materials Science, 2010, 45, 4256-4264 Fundamental issues of reactive wetting by liquid | ||
|
Summary: to the activity of Si in the alloy aSi by the equation 6: (6) where aSi I is the minimum value of Si activity... for SiC formation by reaction between Si in the alloy and solid carbon (aSi I corresponds... .2 0.4 0.6 0.8 1 Immersionenergy,mJ/m 2 aSi Limitofreactivity ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 39 | JOURNAL DE PHYSIQUE CoZZoque 64, supple'rnent au no 12, Tome 43, de'eernbre 1982 page C4-467 | ||
|
Summary: -467 COMPOSITIONAL DEPENDENCE OF Ms TEMPERATURES IN HIGH-PURITY IRON- CHROMIUM-NICKEL AUSTENITIC ALLOYS M. Harmelin... transformationoncooling has been studied in high-purity Fe-14 to 20 wt Z Cr -8 to 25 wt % Ni austenitic alloys. In samples... represent the majority of the stainless steels produced. In this range, the effects of ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 40 | Materials Science and Engineering A 496 (2008) 247255 Contents lists available at ScienceDirect | ||
|
Summary: and Magnesium-Alloy Products: Metric. [14] M. Carlone, S. Saimoto, Exp. Mech. 36 (1996) 360366. [15] D.H. St... on microstructure and tensile deformation of Mg AZ80 alloy at room temperature I.A. Yakubtsova , B.J. Diaka, , C... May 2008 Keywords: Ductility -Phase Magnesium alloys Strain rate sensitivity ... |
|||
|
Source: Niewczas, Marek - Department of Materials Science and Engineering, McMaster University |
|||
|
Collection: Materials Science |
|||
| 41 | The Effect of Water Vapor on Passive-Layer Stability and Corrosion Behavior of FeAlCr Base Alloys | ||
|
Summary: of the corrosion products that formed on alloys exposed to both wet and dry environments. The purpose of this study... sulfidizing gas were the same corrosion products that covered the alloy exposed to the wet sulfidizing gas... to be block-like and similar in appearance to corrosion ... |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 42 | JOURNAL DE PHYSIQUE IV Colloque (77, suppl6ment au Journal de Physique 111,Volume 3, novembre 1993 | ||
|
Summary: Advances in aluminium alloy products for structural applications in transportation J.T. STALEY and D... and presents examples of developments of aluminum alloy products to fill these needs. Designers of aircraft... of the metallurgical characteristics of Al-Li alloy ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 43 | JOURNALDE PHYSIQUEN Colloque C8, supplCmentau Journal de Physique111,Volume 6, dCcembre 1996 C8-413 | ||
|
Summary: -413 Internal Friction and Young Modulus Behaviour of Hot-Rolled Cu-Al-Ni-Ti Shape Memory Alloys E. Cesari, C... a three-point bending Dynamical Mechanical Analyser. In both alloys, Ti-rich X-phase particles, psized... of the parentlmartensite interfaces in a oscillatingstresscycle caused by the precipitates. 1. INTRODUCTION Cu-Al-Ni ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 44 | Tritiated amorphous silicon films and devices T. Kosteskia) | ||
|
Summary: and betaconductivity was observed in a-Si:H:T films. Although the half-life of tritium is 12.5 years, the decay... lifetime and decreased the power from the betavoltaic battery. The betaconductivity properties of the a-Si... into the lattice of a semiconductor.3 Tritiated-hydrogenated amorphous silicon a-Si:H:T is a novel thin ... |
|||
|
Source: Kherani, Nazir P. - Departments of Electrical and Computer Engineering & Materials Science and Engineering, University of Toronto |
|||
|
Collection: Materials Science ; Energy Storage, Conversion and Utilization |
|||
| 45 | Preparation of hydrogenated amorphous silicon tin alloys M. Vergnat, G. Marchal and M. Piecuch | ||
|
Summary: ) versus annealing temperature TA for a-Si samples prepared with di f fe- rent substrate temperatures Ts (P... temperature TA for a-Si samples prepared with different dissociator temperatures TD (PH2 = 4 x 10- 5 Torr, Ts... conductivity UDT R.T. (n-1. cm-1) versus anneal- ing temperature TA for a-Si samples prepared with ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 46 | Band structure calculations in N-ary alloys A. A. Mbaye | ||
|
Summary: 1085 Band structure calculations in N-ary alloys A. A. Mbaye Laboratoire de Physique du Solide et... ofcomplex crystalline alloys is presented This method is twostepwise : within the virtual crystal... ofthe alloy in terms ofthose ofits pure constituents and the intrinsic (VCA) bowing effects |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 47 | Pseudo-elastic deformation behavior in a Ti/Mo-based alloy , M. Aindow a,*, S.P. Alpay a | ||
|
Summary: for medical applications. As a preamble to scale-up and production, a supplemental alloy-screening program... . Both wire and sheet product forms of the alloy were evaluated. Fig. 2. (a) and (b) Secondary electron... Pseudo-elastic deformation behavior in a Ti/Mo-based alloy T. Zhou a , M. ... |
|||
|
Source: Alpay, S. Pamir - Department of Materials Science and Engineering, University of Connecticut |
|||
|
Collection: Materials Science |
|||
| 48 | JOURNAL DE PHYSIQUE Colloque C8, Supplement au no 12, Tome 49, decembre 1988 | ||
|
Summary: (2)CSIRO, Division of Appl. Physics, Lindfield, NSW 2070, Australia (3) Metglass Product, Parsippany... FexNiso-,BlsSi2 alloys indicate the onset of ferromagnetismat x, 2: 2.3. Down to x,, both... of amorphous Fe.Ni~o-~B1~Si2alloys have shown that the alloys with x 2 3 have well defined Curie temperatures |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 49 | The development of binary MgeCa alloys for use as biodegradable materials within bone | ||
|
Summary: Mge1Ca and Mge2Ca alloy samples showed compact surface morphologies, with a layer of corrosion product... crystalline corrosion product in both alloy sam- ples and the Mg(OH)2 peak intensities increased with the ex... The development of binary MgeCa alloys for use as biodegradable ... |
|||
|
Source: Zheng, Yufeng - Department of Advanced Materials and Nanotechnology, Peking University |
|||
|
Collection: Materials Science ; Biology and Medicine |
|||
| 50 | JOURNAL DE PHYSIQUE CoZZoque C4, suppZ6ment au nO1O, Tome 42, octobre 1981 page C4-233 | ||
|
Summary: -RAY DIFFRACTION STUDY OF ATOMIC STRUCTURE OF PLASMA DEPOSITED a-Si :H ALLOYS K. Tsuji and S. Minomura Institute... absorption in a series of plasma-deposited a-Si:H alloys prepared by glow-discharge decompo- sition of silane... in the fundamental edge region of plasma- deposited a-Si:H ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 51 | J PHYS. IV FRANCE 7 (1997) ColloqueC5, Supplkmentau Journal de Physique 111 de novembre 1997 | ||
|
Summary: shape memory alloys as a source of product innovation and differentiation. Strategies are considered... &D and promotion could increase the market opportunities for shape memory alloys whilst making the whole product... and product strategies should aim to diffuse shape memory ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 52 | Materials Science and Engineering A 405 (2005) 102110 Gaseous corrosion resistance of FeAl based | ||
|
Summary: of surface area covered by unwanted nodule corrosion products for alloys exposed to the sulfidizing... of surface area covered by unwanted nodule corrosion products for alloys exposed to the mixed oxidizing... and chromium effect on the amount of surface area covered by unwanted nodule corrosion ... |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 53 | SOME MAGNETIC PROPERTIES OF PLATINUM-RICH Pt-Fe ALLOYS By J. CRANGLE, | ||
|
Summary: 435 SOME MAGNETIC PROPERTIES OF PLATINUM-RICH Pt-Fe ALLOYS By J. CRANGLE, Department of Physics... magnetization on face centred cubic platinum-iron alloys having compositions around Pt3Fe and also on alloys... with lower iron contents, are reported. In the Pt3Fe superlattice region the alloys appear to be ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 54 | In vitro investigation of Fe30Mn6Si shape memory alloy as potential biodegradable metallic material | ||
|
Summary: into consideration in electrochemical measurements. For Fe-based alloy the surface layer of corrosion products can... In vitro investigation of Fe30Mn6Si shape memory alloy as potential biodegradable metallic material... 2010 Available online xxxx Keywords: Mechanical properties Shape memory materials FeMnSi ... |
|||
|
Source: Zheng, Yufeng - Department of Advanced Materials and Nanotechnology, Peking University |
|||
|
Collection: Materials Science ; Biology and Medicine |
|||
| 55 | A Tool for Verified Design using Alloy for Specification and CrocoPat for Verification | ||
|
Summary: A Tool for Verified Design using Alloy for Specification and CrocoPat for Verification Alain... in Alloy, and use the effi- cient interpreter for relational programs CrocoPat to verify that the design... fulfills all constraints specified in the ontology. Techni- cally, we transform all constraints from Alloy |
|||
|
Source: Beyer, Dirk - Fakultät für Informatik und Mathematik, Universität Passau |
|||
|
Collection: Computer Technologies and Information Sciences |
|||
| 56 | Using Traceability for Reverse Instance Transformations with SiTra | ||
|
Summary: demonstrate the method in a case study of UML2Alloy, a complex transformation from UML to the Alloy analysis... language. In this case study, A UML Class Diagram is transformed in to its equivalent Alloy form... . The presented method automatically transforms analysis (instances) of the Alloy model, back into ... |
|||
|
Source: Bordbar, Behzad - School of Computer Science, University of Birmingham |
|||
|
Collection: Computer Technologies and Information Sciences |
|||
| 57 | Effect of Composition on the Solidification Behavior of Several Ni-Cr-Mo and Fe-Ni-Cr-Mo Alloys | ||
|
Summary: Effect of Composition on the Solidification Behavior of Several Ni-Cr-Mo and Fe-Ni-Cr-Mo Alloys M... .J. PERRICONE and J.N. DUPONT The microstructural development of several Ni-Cr-Mo and Fe-Ni-Cr-Mo alloys over... a range of conditions has been examined. A commercial alloy, AL-6XN, was chosen for analysis along |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 58 | December 1999 NREL/SR-520-27666 A.D. Compaan, X. Deng, and R.G. Bohn | ||
|
Summary: and Astronomy The University of Toledo Toledo, Ohio High Efficiency Thin Film CdTe and a-Si Based Solar Cells... /SR-520-27666 High Efficiency Thin Film CdTe and a-Si Based Solar Cells Annual Technical Report March 4... efficiency CdTe-based thin-film solar cells and on high efficiency a-Si-based thin-film solar cells |
|||
|
Source: Deng, Xunming - Department of Physics and Astronomy, University of Toledo |
|||
|
Collection: Renewable Energy |
|||
| 59 | JOURNAL DE PHYSIQUE Colloque C3, suppl6men-t au n 0 9 , Tome 48, septembre 1987 | ||
|
Summary: -Li-Mg AND Al-Li-Cu-Mg ALLOYS C.H. TONG, L.G. YAO, C.Y. NIEH, C.P. CHANG and S.E. HSU Chung shan Institute... of the present work is to study the casting characteristics of various A1-Li alloys, which include fluidity... and strengths of the alloys and their interaction with cast molds. Materials investigated are Al-Li-Mg and Al |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 60 | JOURNAL DE PHYSIQUE IV Colloque C7, supplement au Journal de Physique III, Volume 5, novembre 1995 C7-265 | ||
|
Summary: C7-265 Experimental Determination of the Miscibility Gap in High Purity Iron-Chromium Alloys V. Nika... established the miscibility gap in the iron - chromium system by studying ageing of alloys prepared from high... purity materials. Samples were obtained by levitation melting. Alloys with less than 50% of chromium were |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 61 | CORROSION ENGINEERING SECTION CORROSION--Vol. 60, No. 5 501 | ||
|
Summary: . The substrate corrosion products formed on these alloys were uniform and appeared to be made up of multiple... . The substrate corrosion products observed on these alloys seemed to consist of multiple layers, and cracks... adjacent to the substrate corrosion product. The nominal aluminum ... |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 62 | Part IB Metals and Alloys Course A: Worked Examples | ||
|
Summary: Part IB Metals and Alloys Course A: Worked Examples H. K. D. H. Bhadeshia Download postscript file... Download PDF file Question 1 Substitutional atom diffusion in binary alloys within the cubic crystal system... . Non-cubic crystals 2. Ternary alloys 3. Alloys with a very fine grain size 4. Non-ideal solid |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 63 | Amorphous Siliconbased Solar Cells Xunming Deng1 | ||
|
Summary: is typically about 1.75 eV in a-Si:H, but varies substantially with deposition conditions and alloying... for a-Si1-xGex:H in Figure 12.10. For simplicity, we shall usually refer to these alloys using... in devices. In particular, a-SiGe alloys with optical gaps down ... |
|||
|
Source: Schiff, Eric A. - Department of Physics, Syracuse University |
|||
|
Collection: Materials Science ; Renewable Energy |
|||
| 64 | Durable alloy foils are needed for gas turbine recuperators operating at 650-700C. It has been established that water vapor in the | ||
|
Summary: ABSTRACT Durable alloy foils are needed for gas turbine recuperators operating at 650°-700°C... . Laboratory testing at 650°-800°C of commercial and model alloys is being used to develop a better... for commercial alloys 709, 120 and 625. After 10,000h exposures at 650° and 700°C in humid air, grain boundary Cr |
|||
|
Source: Pint, Bruce A. - Materials Science & Technology Division, Oak Ridge National Laboratory |
|||
|
Collection: Materials Science |
|||
| 65 | Discussion 229 to [111] which divide the reciprocal lattice distance 220 into | ||
|
Summary: RT(X{ - X~)2 · r. _r tanh y~2 - 8XY (l + V a/smh V a) . ---'----- . SI1. I ya/2 ... (68) For the ~ lamellae... -Pd alloy, but at 50% Ag there is an increase. I wonder if there is an explanation for this effect. I know... :One of the ways to deal with this is to look at an alloy that does not show a sharp ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 66 | A study on alkaline heat treated MgCa alloy for the control of the biocorrosion rate | ||
|
Summary: A study on alkaline heat treated MgCa alloy for the control of the biocorrosion rate X.N. Gu a , W... the biocorrosion rate by surface modification, MgCa alloy (1.4 wt.% Ca content) was soaked in three alkaline... oxide layers with the thickness of about 13, 9 and 26 lm were formed on the surfaces of MgCa alloy |
|||
|
Source: Zheng, Yufeng - Department of Advanced Materials and Nanotechnology, Peking University |
|||
|
Collection: Materials Science ; Biology and Medicine |
|||
| 67 | JOURNAL DE PHYSIQUE CoZloque C4, supple'ment au nOIO, Tome 42, octobre 1981 page C4-667 | ||
|
Summary: .Sn, provided such an alloy exists. 0.5 I 1 I 1005 OK) 0.15 I - Fig. 2 : Variation of the bandgap of a-Si Sn... absorption at room temperature of a-Si 1-xSnx alloys. These salient features can be related f l... - lating to 0 at x % 0.5. The high sensibility of a-Si electronic structure to ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 68 | Ris-R-1276(EN) Final Report | ||
|
Summary: of the microstructure originating from the manu-facturing procedure employed in the production of this alloy is another... and Copper Alloys before and after Irradiation (ITER R & D Task No. T213) B.N. Singh and S. Tähtinen... on physical and mechanical properties of copper and copper alloys. The work ... |
|||
|
Source: Risø National Laboratory |
|||
|
Collection: Multidisciplinary Databases and Resources |
|||
| 69 | ISSUES TO ADDRESS... How are metal alloys classified and how are they used? | ||
|
Summary: ISSUES TO ADDRESS... · How are metal alloys classified and how are they used? · What are some... quenched, for example? · How can properties be modified by post heat treatment? CHAPTER 11: METAL ALLOYS... APPLICATIONS AND PROCESSING #12;Classifications of Metal Alloys Fe3C cementite Metal Alloys Steels ... |
|||
|
Source: Mukasyan, Alexander - Department of Chemical and Biomolecular Engineering, University of Notre Dame |
|||
|
Collection: Materials Science |
|||
| 70 | PublishedbyManeyPublishing(c)IOMCommunicationsLtd ISSN 13621718 Science and Technology of Welding and Joining 1999 Vol. 4 No. 1 1 | ||
|
Summary: and Joining 1999 Vol. 4 No. 1 1 Many alloys of engineering significance contain multiple solute additions... of multicomponent alloys of engineering significance. However, in recent years there has been considerable progress... which can be applied to alloy systems containing many elements. In view of this fact it is useful |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 71 | UPDATE ON THE STATUS OF ODS ALLOYS FOR FOSSIL ENERGY APPLICATIONS I.G. Wright and B.A. Pint | ||
|
Summary: UPDATE ON THE STATUS OF ODS ALLOYS FOR FOSSIL ENERGY APPLICATIONS I.G. Wright and B.A. Pint Oak... of oxide dispersion-strengthened (ODS) alloys. A report has been prepared compiling results from... the literature of ODS alloy joining trials to provide a comprehensive documentation of the methods, procedures |
|||
|
Source: Oak Ridge National Laboratory Fossil Energy Program |
|||
|
Collection: Fossil Fuels |
|||
| 72 | Software Specification (2IW05) Z and Alloy Notations: A Quick Reference | ||
|
Summary: and Functions Z Alloy Intuitive meaning A × B A -> B Cartesian product R · R R.R composition dom R R.univ domain... Software Specification (2IW05) Z and Alloy Notations: A Quick Reference Logic and Set Theory Z... Alloy Intuitive meaning p q p and q, p && q conjunction p q p or q, p || q ... |
|||
|
Source: Mousavi, Mohammad - Wiskunde en Informatica, Technische Universiteit Eindhoven |
|||
|
Collection: Computer Technologies and Information Sciences |
|||
| 73 | RECENT PROGRESS IN THE FIELD OF PERMANENT MAGNETS By K. HOSELITZ. | ||
|
Summary: and the BH",", product of Vicalloy II according to Nesbitt. Diffusion hardening Permanent Magnet Alloys... a paper by Zum- busch [1942]. Zumbusch found that for production of anisotropic properties the alloys must... or shock or electromagnetic fields and this should be achieved preferably with a minimum of ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 74 | IOP PUBLISHING BIOMEDICAL MATERIALS Biomed. Mater. 4 (2009) 065011 (8pp) doi:10.1088/1748-6041/4/6/065011 | ||
|
Summary: , AZ91 alloys X N Gu1, Y F Zheng1,3 and L J Chen2 1 State Key Laboratory for Turbulence and Complex... .iop.org/BMM/4/065011 Abstract The electrochemical behavior of potential orthopedic MgCa, AZ31 and AZ91 alloys... three alloys for various immersion time intervals was investigated by linear polarization |
|||
|
Source: Zheng, Yufeng - Department of Advanced Materials and Nanotechnology, Peking University |
|||
|
Collection: Materials Science ; Biology and Medicine |
|||
| 75 | Abstract--We have studied the thermal treatments necessary to texture Cu-Ni alloys in view of applications as substrate for | ||
|
Summary: 2MK05 1 Abstract--We have studied the thermal treatments necessary to texture Cu-Ni alloys in view... of applications as substrate for the YBCO coated conductors. Several alloy compositions chosen in order to avoid... and X-rays. The results show that the annealing temperature is dependant of the alloy composition |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 76 | Properties of Porous TiNbZr Shape Memory Alloy Fabricated by Mechanical Alloying | ||
|
Summary: Properties of Porous TiNbZr Shape Memory Alloy Fabricated by Mechanical Alloying and Hot Isostatic... Nb-6Zr (at.%) shape memory alloys produced using elemental powders by means of mechanical alloying... and hot isostatic pressing. It is found that the porous Ti-22Nb-6Zr alloys prepared by ... |
|||
|
Source: Zheng, Yufeng - Department of Advanced Materials and Nanotechnology, Peking University |
|||
|
Collection: Materials Science ; Biology and Medicine |
|||
| 77 | JOURNAL DE PHYSIQUE Colloque C8, Supplbment au no 12, Tome 49, dbcembre 1988 | ||
|
Summary: , Yugoslavia (3)Metglass Products, Allied Chemical, Parsippany, New York 07054, U.S.A. Abstract... . The magnetization showed strong depression for x 2 50. The alloys with x 2 65 are paramagnetic at room temperature... and paramagnetic alloys. The magnetism of amorphous alloys has attracted considerable ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 78 | JOURNALDE PHYSIQUEIV Colloque C7, supplkmentau Journal de Physique 111,Volume3, novembre 1993 | ||
|
Summary: by the CEC under BRITE EURAM contract BREU 0356 C which aims at developping a new Aluminium alloy for use... at temperatures up to 350°C, fracture.toughnessand corrosion results on 11 alloys from the A1-Fe-V, Al-Fe-Mo, Al... atomizationprocessfor the A1-Fe-V system. The results obtained on the most promising products are ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 79 | (ORhCL/Sub/93-SPI73/04) STUDY OF FATIGUE AND FRACTURE BEHAVIOR OF | ||
|
Summary: h (ORhCL/Sub/93-SPI73/04) STUDY OF FATIGUE AND FRACTURE BEHAVIOR OF CR-BASED ALLOYS... -Ta Alloys January IS, 2001 ReportPreparedby Y.H. He, I? Lu, D. F. Wang,and P. K. Liaw The University... AND FRACTURE BEHAVIOR OF CR-BASED ALLOYS AND INTERMETALLIC MATERIALS: Effects of Processing |
|||
|
Source: Oak Ridge National Laboratory Fossil Energy Program |
|||
|
Collection: Fossil Fuels |
|||
| 80 | SEM and EPMA Analysis of Spark Plug Electrode Erosion L.R. Walker*, H.T. Lin*, I. Levina**, M.P. Brady*, J. Lykowski** | ||
|
Summary: -6064 USA ** Federal Mogul Corporation Ignition Products, 900 Upton Av. Toledo, OH 43607 USA Ignition... -base alloy (nominally 90-95 wt.% Ni) with inserts of Pt-4W and Ir alloys at the ground and center electrodes... the Ni alloy and the Pt-4W insert, nearly completely separating the Pt-4W tip from the ground ... |
|||
|
Source: Pint, Bruce A. - Materials Science & Technology Division, Oak Ridge National Laboratory |
|||
|
Collection: Materials Science |
|||
| 81 | Journal of Magnetism and Magnetic Materials ] (]]]]) ]]]]]] The influence of composition and field annealing on magnetic | ||
|
Summary: annealing on magnetic properties of FeCo-based amorphous and nanocrystalline alloys F. Johnsona,Ã, C.Y. Umb... of four FeCo-based amorphous and nanocrystalline alloys. The compositions (Fe50Co50)89Zr7B4 and (Fe65Co35... .5 was chosen to investigate Nb substitution for Zr in an FeCo-based alloy. This substitution is shown |
|||
|
Source: McHenry, Michael E. - Department of Materials Science and Engineering, Carnegie Mellon University |
|||
|
Collection: Materials Science |
|||
| 82 | JOURNAL DE PHYSIQUE IV Colloque C9, supplCmentau Journal de Physique 111,Volume 3, decembre 1993 | ||
|
Summary: -Martind'HCres, France Abstract. - Laser alloying of boron predeposited on iron samplesled to Fe-Fe2Balloys... , with composition and microstructure depending on the irradiation conditions. Three different sur- face alloys were... prepared corresponding to hypo-, hyper- and eutectic microstructures. This last kind of surface alloy |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 83 | Introduction of antibacterial function into biomedical TiNi shape memory alloy by the addition of element Ag | ||
|
Summary: Introduction of antibacterial function into biomedical TiNi shape memory alloy by the addition... alloy Ion release Biocompatibility Antibacterial property a b s t r a c t A new kind of biomedical shape... memory TiNiAg alloy with antibacterial function was successfully devel- oped in the present study |
|||
|
Source: Zheng, Yufeng - Department of Advanced Materials and Nanotechnology, Peking University |
|||
|
Collection: Materials Science ; Biology and Medicine |
|||
| 84 | This article appeared in a journal published by Elsevier. The attached copy is furnished to the author for internal non-commercial research | ||
|
Summary: the corrosion products on the surface of the extruded WE43 alloy sample tested in SBF at 37 °C. Clearly... 's personal copy Corrosion fatigue behaviors of two biomedical Mg alloys AZ91D and WE43 In simulated body... July 2010 Available online 23 July 2010 Keywords: Fatigue Corrosion fatigue Magnesium ... |
|||
|
Source: Zheng, Yufeng - Department of Advanced Materials and Nanotechnology, Peking University |
|||
|
Collection: Materials Science ; Biology and Medicine |
|||
| 85 | 2724 IEEE TRANSACTIONS ON MAGNETICS, VOL. 40, NO. 4, JULY 2004 Magnetic Properties of Co-Substituted | ||
|
Summary: -Substituted Fe-Nb-Ta-Mo-B Amorphous Alloys C.-Y. Um and M. E. McHenry Abstract--Fe Co Nb Ta Mo B 0 41 amor- phous... alloys were produced by rapid solidification. The Co substitutions for Fe on the magnetic and structural... properties of as-cast and crystalline alloys were studied. Co substitutions were shown to enhance |
|||
|
Source: McHenry, Michael E. - Department of Materials Science and Engineering, Carnegie Mellon University |
|||
|
Collection: Materials Science |
|||
| 86 | METALLURGICAL AND MATERIALS TRANSACTIONS A VOLUME 29A, MAY 1998--1449 A Combined Solubility Product/New PHACOMP Approach | ||
|
Summary: METALLURGICAL AND MATERIALS TRANSACTIONS A VOLUME 29A, MAY 1998--1449 A Combined Solubility Product... -base alloys containing systematic variations in Nb, Si, and C. The procedure correctly predicts formation... of the NbC phase prior to the Laves phase and reveals the effect of nominal alloy content on reaction |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 87 | JOURNAL DE PHYSIQUE Colloque C8,Suppl6ment au no 12, Tome 49, dkembre 1988 | ||
|
Summary: by powder metal- lurgy. alloy, hot-pressed product and sintered one. Fig. 2. - SEM micrographs of (a) as... magnets based on b the R-Fe-B system directly from cast alloy without . -4 the handling of magnetic powder... ) and scanningelectronmi- croscopy (SME)were utilized to investigate the mi- crostructures of the ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 88 | JOURNAL OF MATERIALS SCIENCE LETTERS 20, 2001, 457459 Tensile and fatigue behavior of AZ91D magnesium alloy | ||
|
Summary: magnesium alloy A. BAG, W. ZHOU School of Mechanical and Production Engineering, Nanyang Technological... University, Nanyang Avenue, Singapore 639 789 E-mail: mwzhou@ntu.edu.sg Recently magnesium alloys, owing... developments of mag- nesium alloys and processes have been driven by the requirements of the ... |
|||
|
Source: Zhou, Wei - School of Mechanical and Aerospace Engineering, Nanyang Technological University |
|||
|
Collection: Engineering ; Materials Science |
|||
| 89 | As microturbine recuperators are needed to operate at higher temperatures in order to achieve higher engine operating efficiencies, a | ||
|
Summary: accelerated attack caused by water vapor, which is often present as a combustion product. Nickel-base alloys... , fundamental understanding of alloy composition effects on corrosion resistance of stainless steel components... used in recuperators, the oxidation behavior of model alloys is being studied. A ... |
|||
|
Source: Pint, Bruce A. - Materials Science & Technology Division, Oak Ridge National Laboratory |
|||
|
Collection: Materials Science |
|||
| 90 | EUROSPF Conference Carcassonne, France from 3-5 September 2008 1 | ||
|
Summary: in the US automotive industry. QPF has been mainly studied in the case of Al-Mg alloy and to a much lesser... extent in the case of magnesium alloys. In this presentation, some similarities and differences between... and fracture mechanisms to temperature and strain rate of a wrought magnesium alloy. In this framework, data |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 91 | This article appeared in a journal published by Elsevier. The attached copy is furnished to the author for internal non-commercial research | ||
|
Summary: are shown in Fig. 5. The resulting corrosion products for the untreated MgCa alloy sample after 50 days... amounts of Mg(OH)2 corrosion product can be found on the surface of the 300 V MAO-treated MgCa alloy... Ca alloy X.N. Gu a,b , N. Li a,b , W.R. Zhou a,b , Y.F. Zheng a,b, , X. ... |
|||
|
Source: Zheng, Yufeng - Department of Advanced Materials and Nanotechnology, Peking University |
|||
|
Collection: Materials Science ; Biology and Medicine |
|||
| 92 | Materials Science and Engineering B 176 (2011) 17781784 Contents lists available at ScienceDirect | ||
|
Summary: the extruded alloy sample than those from the cast one, indicating the less Mg(OH)2 corrosion product formation... performance and biological response of a MgZnZr alloy X.N. Gua,b , N. Lia,b , Y.F. Zhenga,b, , Liquan Ruanc... May 2011 Keywords: MgZnZr alloy Biomaterials Degradable Corrosion Cell ... |
|||
|
Source: Zheng, Yufeng - Department of Advanced Materials and Nanotechnology, Peking University |
|||
|
Collection: Materials Science ; Biology and Medicine |
|||
| 93 | Effects of alloying elements (Mn, Co, Al, W, Sn, B, C and S) on biodegradability and in vitro biocompatibility of pure iron | ||
|
Summary: -compact and not tightly adhering to the original alloy surface. As a result of this the corrosion product layer easily... the experimental Fe X alloys initiates at an edge position. (ii) The corrosion products grow along the direction... -rolled FeCo, FeC, and FeS alloys. (iv) The ... |
|||
|
Source: Zheng, Yufeng - Department of Advanced Materials and Nanotechnology, Peking University |
|||
|
Collection: Materials Science ; Biology and Medicine |
|||
| 94 | JOURNAL DE PHYSIQUE Colloque C3, suppl6ment au n09, Tome 48, septembre 1987 | ||
|
Summary: low, even for conventional alloys. The yield of finished product from aircraft manufacturers... ~OQB, Bucks., Great-Britain Abstract The yield of finished aluminium-lithium product from suppliers... ' semi- fabrication facilities varies with the product form but is generally quite low. The yield |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 95 | HIGH TEMPERATURE SULFIDATION BEHAVIOR OF LOW Al IRON-ALUMINUM COMPOSITIONS | ||
|
Summary: of corrosion product can be seen as the aluminum content increases in the alloy. The 5 wt% sample has a scale... are currently being considered for enhanced sulfidation resis- tance. The performance of these alloys... , the application of iron-aluminum alloys is currently limited due to hydrogen cracking ... |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 96 | JOURNAL DE PHYSIQUE Colloque C3, suppl6ment au n09, Tome 48, septembre 1987 | ||
|
Summary: product forms. Deformation and Fracture In any alloy strengthened by coherent particles... OF ALUMINIUM-LITHIUM-COPPER-MAGNESIUM- ZIRCONIUM ALLOYS-8090 AND 8091 W.S. MILLER, J. WHITE and D.J. LLOYD... alloys containing up to 3wt% lithium and cast using an ingot metallurgy route are currently being |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 97 | Introduction Goals Dissolution Precipitation Continuation Questions Mathematical Models for Simultaneous | ||
|
Summary: Alloys #12;Introduction Goals Dissolution Precipitation Continuation Questions Aluminium alloy production... for Simultaneous Particle Dissolution and Nucleation during Heat Treatment of Commercial Aluminium Alloys Jos de... Dissolution and Nucleation during Heat Treatment of Commercial Aluminium ... |
|||
|
Source: Vuik, Kees - Delft Institute of Applied Mathematics, Elektrotechniek, Wiskunde en Informatica, Technische Universiteit Delft |
|||
|
Collection: Mathematics ; Computer Technologies and Information Sciences |
|||
| 98 | Comparative study on the corrosion behavior of TiNb and TMA alloys for dental application in various artificial solutions | ||
|
Summary: Comparative study on the corrosion behavior of TiNb and TMA alloys for dental application... 2011 Keywords: TiNb alloy TMA Corrosion Fluoride Artificial saliva The corrosion behavior of Ti... Nb dental alloy in artificial saliva with and without the addition of lactic acid and sodium fluoride |
|||
|
Source: Zheng, Yufeng - Department of Advanced Materials and Nanotechnology, Peking University |
|||
|
Collection: Materials Science ; Biology and Medicine |
|||
| 99 | Analysis of Model Transformations via Alloy Kyriakos Anastasakis1 | ||
|
Summary: step results in the production of an Alloy model of the model transformation. The Alloy Analyzer can... Analysis of Model Transformations via Alloy Kyriakos Anastasakis1 and Behzad Bordbar1 and Jochen M... of representing declarative model transformations in a formalism called Alloy. We ... |
|||
|
Source: Bordbar, Behzad - School of Computer Science, University of Birmingham |
|||
|
Collection: Computer Technologies and Information Sciences |
|||
| 100 | JOURNAL DE PHYSIQUE IV Colloque C9, supplCment au Journal de Physique 111, Volume 3, dCcembre 1993 | ||
|
Summary: Corrosion of chromium containing alloys in non-steady state environments containingoxygen, carbon... containing alloys in mixed oxygen-chlorine environ- ments occurs by the formation of pores which penetrate... down grain boundaries of the alloys. No internal attack was detected in a binary Fe-20 %Cr alloy |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||