| Sample search results for: a2 tool steel |
| 1 | Ris-R-1244(EN) Tool Steels | ||
|
Summary: Risø-R-1244(EN) Tool Steels Christian Højerslev Risø National Laboratory, Roskilde January 2001 #12... ;Abstract On designing a tool steel, its composition and heat treatment parame- ters are chosen to provide... deformation. Tool steels are alloyed with carbide ... |
|||
|
Source: Risø National Laboratory |
|||
|
Collection: Multidisciplinary Databases and Resources |
|||
| 2 | Recycling Steel Automatically-Through Resource Recovery Walter J. Foley | ||
|
Summary: recycle their used steel cans, old bicycles, tools and other used items. Therefore, magnetic separation... Recycling Steel Automatically-Through Resource Recovery - ABSTRACT Walter J. Foley General Manager... , Federal Relations Steel Recycling Institute 1667 K Street, NW Suite 460 Washington, DC 20006 Last ... |
|||
|
Source: Columbia University - Waste-to-Energy Research and Technology Council (WTERT) |
|||
|
Collection: Renewable Energy |
|||
| 3 | Super Bainite (High Hardness) Steel Super Bainite steel is a high performance armour steel, following live fire trials it has been | ||
|
Summary: Materials Super Bainite (High Hardness) Steel Background Super Bainite steel is a high performance... armour steel, following live fire trials it has been demonstrated to have a hardness matching... that of alternative high hardness armour steels, and some ceramic armours, at a much reduced cost. Technology ... |
|||
|
Source: Centre for Environment, Fisheries and Aquaculture Science (Cefas) |
|||
|
Collection: Environmental Sciences and Ecology |
|||
| 4 | Design of Partially or Fully Composite Beams, with Ribbed Metal Deck, Using | ||
|
Summary: compressive force in the slab is C = Fc ba = 0.85 fc ' ba (16) and it acts at a distance a/2 from the top... a/2. In the bottom part of the chart (Fig. 7) locate the line corresponding to the particular value... is worth a thousand words (numbers)." With this optic in mind, the design aspects of ... |
|||
|
Source: Foley, Christopher M. - Department of Civil and Environmental Engineering, Marquette University |
|||
|
Collection: Engineering |
|||
| 5 | Ris-R-1359(EN) Fractography analysis of tool samples | ||
|
Summary: -speed tool steels 6 Heat treatment 7 Effect of alloying elements 8 Powder metallurgy 10 Third generation P... shape or near net shape parts. High-speed tool steels Typical materials used for cold forging tools... are P/M (powder metallurgical) high-speed tool ... |
|||
|
Source: Risø National Laboratory |
|||
|
Collection: Multidisciplinary Databases and Resources |
|||
| 6 | Packaging of Micro Strain Sensors Hung-I Kuo, Jun Guo, Darrin J. Young, and Wen H. Ko | ||
|
Summary: on the adhesive is 1 = 2V/A = 2.2 MPa. The displacement of the base due to the maximum strain of 10-3 , d1 can... attached to a stainless steel base as a module and techniques of rapid attachment of sensor modules... bonded onto a patterned stainless steel foil by using conventional strain gage adhesive and ... |
|||
|
Source: Young, Darrin J. - Department of Electrical Engineering and Computer Sciences, Case Western Reserve University |
|||
|
Collection: Engineering |
|||
| 7 | NIST NCSTAR 1-3A (Draft) Federal Building and Fire Safety Investigation of the | ||
|
Summary: Disaster Contemporaneous Structural Steel Specifications (Draft) William E. Luecke Thomas A. Siewert Frank... Building and Fire Safety Investigation of the World Trade Center Disaster Contemporaneous Structural Steel... Investigation, NIST NCSTAR 1-3A iii ABSTRACT This report reviews the contemporaneous (1960s era) steel |
|||
|
Source: National Institute of Standards and Technology (NIST), Ceramics Division |
|||
|
Collection: Materials Science |
|||
| 8 | -TRIPSteel2010Yi,Hongliang Thesis for Doctor of Philosophy | ||
|
Summary: .........................................................................................................131 Appendix 2 Medium carbon fully pearlitic steel obtained by slow cooling ..................132 A2... .........................................................................................................132 ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 9 | Prediction of Reoxidation Inclusion Composition in Casting of Steel | ||
|
Summary: Prediction of Reoxidation Inclusion Composition in Casting of Steel Liang Wang and Christoph... ABSTRACT A model is developed to calculate the composition of reoxidation inclusions in steel casting... . It is assumed that oxygen is continually absorbed by the steel during pouring. The software package Thermo |
|||
|
Source: Beckermann, Christoph - Department of Mechanical and Industrial Engineering, University of Iowa |
|||
|
Collection: Materials Science |
|||
| 10 | High-speed machining of cast iron and alloy steels for die and mold manufacturing | ||
|
Summary: -effective technology using advanced machine tools and cutting tools. Furthermore, machining of alloy steels in hardened... and molds from tool steels, HSM at hardened state replaces the slow EDM processes in many applications. HSC... of hard steels, however, result ... |
|||
|
Source: Ozel, Tugrul - Department of Industrial Engineering, Rutgers University |
|||
|
Collection: Engineering |
|||
| 11 | Monitoring and Advising on Lave Villa Bridge Principal Investigators: Professors Morris Fine and Semyon Vaynman | ||
|
Summary: is depicted in Fig. 5. 1 #12;60 70 80 90 100 110 0 0.5 1 1.5 Yield Stress UTS Stress,Ksi (a) 2 Plate Thickness... ;During the last few years the new 70-ksi yield strength grade structural steel developed by ITI (NUCu-70W... high performance steel now covered by ASTM A710 Grade B specification) achieved ... |
|||
|
Source: Northwestern University, Robert R. McCormick School of Engineering and Applied Science, Infrastructure Technology Institute |
|||
|
Collection: Engineering |
|||
| 12 | Construction Management Applications: Challenges in Developing Execution Plans | ||
|
Summary: and Events (TONAE) A1,B A1,E A4,B A4,E A2,B A2,E A3,B T1 T2 T3 T4 T5 0 0 6 0 TNOW Y2 1 1 1 1 E1,B E1,E 0 1... execution What-if analysis Contingency planning #12;Stages of Steel Project Management Design decision... to use steel Participants Owner Architect ... |
|||
|
Source: Onder, Nilufer - Department of Computer Science, Michigan Technological University |
|||
|
Collection: Computer Technologies and Information Sciences |
|||
| 13 | ISSUES TO ADDRESS... How are metal alloys classified and how are they used? | ||
|
Summary: - <0.25% C, medium = 0.25% - 0.60%, high = 0.6% 1.4% #12;3 Sears Craftsman® tools 4027 steel #12... classification....... #12;7 Tool steels are denoted with a letter, ie. O1, H2... AISI American Iron and Steel... Institute UNS unified numbering system ... |
|||
|
Source: Montana State University, Chemical and Biological Engineering Department, Composite Technologies Research Group |
|||
|
Collection: Materials Science |
|||
| 14 | Journal of Nuclear Materials 329-333 (2004) 238-242 Design of new Fe-9CrWV reduced-activation martensitic steels for | ||
|
Summary: 100 1000 200 400 600 800 1000 1200 1400 1600 1800 Temperature / ( 0 C) Mass/% "LIQUID" "BCC_A2" "FCC... -activation martensitic steels for creep properties at 650°C Y. de Carlan*a , M. Murugananthb , T. Sourmailc and H. K. D... , Pembroke Street, Cambridge CB2 3QZ, U.K. Abstract New low-activation martensitic ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 15 | ISSUES TO ADDRESS... How are metal alloys classified and how are they used? | ||
|
Summary: ® tools 4027 steel #12;2 Carbon: Present in all steels, it is the most important hardening element. Also... has different metal classification....... #12;3 Tool steels are denoted with a letter, ie. O1, H2... ... AISI American Iron and Steel Institute UNS ... |
|||
|
Source: Montana State University, Chemical and Biological Engineering Department, Composite Technologies Research Group |
|||
|
Collection: Materials Science |
|||
| 16 | 9, , 15780 : . , .:210 772 3129, Fax: 210 772 3228, | ||
|
Summary: ) Industrial relevance of academic research on pickling of alloyed steels and stainless steels It is not always... to environmental regulations, complexity of steel assemblies, and requirements on turn-over for economical reasons... are the industrial needs? and how does pickling proceeds? - a first case study: the pickling of ... |
|||
|
Source: Papadopoulos, Evangelos - Department of Mechanical Engineering, National Technical University of Athens |
|||
|
Collection: Engineering |
|||
| 17 | ABSTRACT. The stress-relief cracking (SRC) susceptibility of single-pass welds | ||
|
Summary: . Halstead Press, New York, N.Y. 23. Pigrova, G. D. 1996. Metallurgical Transactions A, 27A(2): 498502. 24... steel, HCM2S, has been evaluated and compared to 2.25Cr-1Mo steel using Gleeble thermal simulation... techniques. HCM2S was found to be more susceptible to stress-relief cracking than 2.25Cr-1Mo ... |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 18 | March 28, 2006 19:7 Advances in Cooperative Control and Optimization chapteruryasev ESTIMATING THE PROBABILITY DISTRIBUTIONS OF | ||
|
Summary: . Recalling that dQ/d > 0 for all (l, r), it follows from (A.2) that f (x) > 0. Therefore f... < d2 Q/d2 |l < d2 Q/d2 |r . As in case (i), but the numera- tor of (A.2) is now positive, which... distributions for the impact toughness characteristic of steels, as measured by ... |
|||
|
Source: Uryasev, Stanislav - Department of Industrial and Systems Engineering, University of Florida |
|||
|
Collection: Engineering |
|||
| 19 | Effect of Shrinkage on Service Performance of Steel Castings | ||
|
Summary: properties and structural performance of steel castings. · A validated simulation tool that predicts... = 2.5 mm; a/b = 1 2a 2b Dh = 2a Figure 10: Measured internal shrinkage pores and the defect geometry... |10 10|11 10|12 Cycles to Failure (Nf ) 500 1000 1500 2000 2500 MaximumLoad(P),lb ... |
|||
|
Source: Beckermann, Christoph - Department of Mechanical and Industrial Engineering, University of Iowa |
|||
|
Collection: Materials Science |
|||
| 20 | Improving the Performance of Creep-Strength-Enhanced Ferritic Steels | ||
|
Summary: Improving the Performance of Creep- Strength-Enhanced Ferritic Steels Mike Santella April 27, 2011... the Performance of Creep-Strength-Enhanced Ferritic Steels Purpose is to build fundamental understanding needed... to maximize performance of CSEF steels · Activities combine basic & applied R&D with strong power ... |
|||
|
Source: Oak Ridge National Laboratory Fossil Energy Program |
|||
|
Collection: Fossil Fuels |
|||
| 21 | ORNL 2011-G00424/jcn UT-B ID 201102564 | ||
|
Summary: ORNL 2011-G00424/jcn UT-B ID 201102564 09.2011 Decorative Steel Composition with a Crystalline... Surface Technology Summary A method for producing a new decorative steel with a crystalline surface... was developed by an ORNL researcher. This invention potentially represents the first new decorative steel |
|||
|
Source: Pennycook, Steve - Materials Science and Technology Division, Oak Ridge National Laboratory |
|||
|
Collection: Materials Science |
|||
| 22 | STRIP TEMPERATURE IN A METAL COATING LINE ANNEALING FURNACE | ||
|
Summary: radiators in the furnace. The net heat received from the hot wall by a surface element dA2 on the cylinder... is q21 = dA2 F21(T4 2 - T4 1 ) where the shape factor is dA2 F21 = cos(1) cos(2) R2 dA1 where R... is the variable distance from ... |
|||
|
Source: McGuinness, Mark - School of Mathematical and Computing Sciences, Victoria University of Wellington |
|||
|
Collection: Mathematics |
|||
| 23 | Prediction of Reoxidation Inclusion Composition in Casting of Steel | ||
|
Summary: Prediction of Reoxidation Inclusion Composition in Casting of Steel LIANG WANG and CHRISTOPH... pouring of steel castings. The software package Thermo-Calc is used to obtain the inclusion phase... fractions and compositions as a function of the temperature and oxygen content of the steel. Oxygen |
|||
|
Source: Beckermann, Christoph - Department of Mechanical and Industrial Engineering, University of Iowa |
|||
|
Collection: Materials Science |
|||
| 24 | Copyright 2003, The AISE Steel Foundation, Pittsburgh, PA. All rights reserved. 1 The high cost of empirical investigation in an operating steel plant makes it prudent to use all | ||
|
Summary: of empirical investigation in an operating steel plant makes it prudent to use all available tools in designing... Copyright © 2003, The AISE Steel Foundation, Pittsburgh, PA. All rights reserved. 1 The high cost... , troubleshooting and optimizing the process. Physical modeling, such as using water to simulate molten ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 25 | Technical Report Documentation Page 1. Report No. | ||
|
Summary: .............................................................90 Table A.2. U.S. and Brazil Prices of Hot-Rolled Steel Per Ton (US$).............................94... .S.-Latin American Trade on the Southwest's Economy and Transportation System: Case Studies of Coffee and Steel... and steel ... |
|||
|
Source: Southwest Region University Transportation Center |
|||
|
Collection: Engineering ; Energy Storage, Conversion and Utilization |
|||
| 26 | Materials Solutions for Hydrogen Delivery in Pipelines | ||
|
Summary: .8 102.3 7.9 0.81 API X70, A-2 82.3 101.3 7.8 0.81 API X70, A-3 81.4 100.9 8.0 0.81 API X80, B-1 74.9 93... information #12;Project Team SECAT (KY) Project Manager Oregon Steel Mills (OR) Steel Pipe Producer Columbia... ) Codes and Standards DGS Metallurgical Solutions (OR) Steel ... |
|||
|
Source: DOE Office of Energy Efficiency and Renewable Energy, Hydrogen, Fuel Cells and Infrastructure Technologies Program |
|||
|
Collection: Energy Storage, Conversion and Utilization ; Renewable Energy |
|||
| 27 | James A Swanson Page 1 of 16 | ||
|
Summary: ," Caroline R. Kayser , James A. Swanson , and Daniel G. Linzell, Steel Bridge Committee Meeting (A2C02... Research Board - Member of Committee A2CO2 Committee on Steel Bridges, Since 2001 · National Bridge... of Steel Stringer Bridges: ... |
|||
|
Source: Cincinnati, University of - Department of Civil and Environmental Engineering, Infrastructure Institute |
|||
|
Collection: Engineering |
|||
| 28 | Process Efficiency Measurements in the Laser Engineered Net Shaping Process | ||
|
Summary: conducted for the laser-engineered net-shaping process (LENS) for H-13 tool steel and copper pow- der... deposits on H-13 tool steel substrates. This study focused on the effects of laser deposition pro- cessing... was used to produce single-pass deposits of (1) H-13 tool ... |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 29 | 1026 / JOURNAL OF STRUCTURAL ENGINEERING / SEPTEMBER 2000 ANALYSIS AND DESIGN OF LOW-RISE MASONRY AND CONCRETE | ||
|
Summary: ) = 858 142 2 = 1,142 mm2 · n = Es /Ec, n = 7.2, A2 = (2,000 300/7.2) .0025 2,000 300) = 84,833 mm2 · A3... = 100 100/ 7.2 = 1,389 mm2 ; A12 = 3,576 mm2 ; where A1, A2, A3, A4, A5, and A6 = vertical members from... AND CONCRETE WALLS RETROFITTED USING STEEL STRIPS By Mustafa Taghdi,1 ... |
|||
|
Source: Bruneau, Michel - Multidisciplinary Center for Earthquake Engineering Research & Department of Civil, Structural and Environmental Engineering, State University of New York at Buffalo |
|||
|
Collection: Engineering |
|||
| 30 | National Waste Processing Conference Proceedings ASME 1994 RESOURCE RECOVERY: AUTOMATIC RECYCLING | ||
|
Summary: OF STEEL CANS AND OTHER FERROUS GREGORY L. CRAWFORD Steel Recycling Institute Pittsburgh, Pennsylvania... ). While curbside and drop-off recycling programs divert and capture much of the steel can portion... to be a significant means of collecting virtually all steel cans and steel ... |
|||
|
Source: Columbia University - Waste-to-Energy Research and Technology Council (WTERT) |
|||
|
Collection: Renewable Energy |
|||
| 31 | DAWOOD, MINA MAGDY RIAD. Fundamental Behavior of Steel-Concrete Composite Beams Strengthened with High Modulus Carbon Fiber Reinforced Polymer (CFRP) | ||
|
Summary: ................................................................................................... 203 Figure A.2: Measured strains for beam OVL-2... ABSTRACT DAWOOD, MINA MAGDY RIAD. Fundamental Behavior of Steel-Concrete Composite Beams... for the repair and strengthening of steel bridges. Recently, high ... |
|||
|
Source: |
|||
|
Collection: Engineering |
|||
| 32 | International Journal of Machine Tools & Manufacture 40 (2000) 133152 Determination of workpiece flow stress and friction at the | ||
|
Summary: , the following conditions were used: Workpiece: P20 mold steel disks, 3 mm thickness, 30 HRC hardness Tool... , material properties for P20 mold steel workpiece and uncoated carbide tool used in the process simulations... T A eb(T-T0)2 ) c log e¯· e¯· R d log(e¯) ... |
|||
|
Source: Ozel, Tugrul - Department of Industrial Engineering, Rutgers University |
|||
|
Collection: Engineering |
|||
| 33 | Metallurgical and Materials Transactions B, Vol. 34B, No. 5, Oct., 2003, pp. 685-705. HEAT TRANSFER AND SOLIDIFICATION MODEL | ||
|
Summary: , but comprehensive model of heat transfer and solidification of the continuous casting of steel slabs is described... -difference calculation of heat conduction within the solidifying steel shell coupled with 2-D steady-state heat... , and #12;2 thinner shell towards the bottom. This modeling tool can be applied to a wide range of ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 34 | MEASUREMENTS OF MOLTEN STEEL/FLUX INTERFACE PHENOMENA IN THIN SLAB CASTING | ||
|
Summary: A2.1: Pertinent Information for Heats That Were Part of 4-Port SEN Trial...........126 #12;vii LIST... Profile for Heat 213763.....................................124 Figure A2.1: Plot of Metal Level... Fluctuation from Setpoint for Heat 117021................127 Figure ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 35 | Jobsite Layout Considerations The controlling contractor must consider many factors when laying out a site | ||
|
Summary: Worker parking Tool and equipment storage Construction operations facilities and trailers Sanitary... steel project · It should be noted that in some cases the steel contractor will have both fabrication... and erection responsibilities (AISC 1999) General Contractor Steel contractor (fabricator) Architect ... |
|||
|
Source: Mukherjee, Amlan - Department of Civil and Environmental Engineering, Michigan Technological University |
|||
|
Collection: Engineering |
|||
| 36 | Form No. 836 R5 ST 2629 10/91 | ||
|
Summary: a solid solution, that the relevant reaction that controls pO2 is most likely: 2/(2a-b)[PuaOb] + O2 2a/(2... to be determined. Also, these calculations provide a tool for determining the maximum rate of vaporization... , and waste type. Potential for Embrittlement of Stainless Steel Based on a fairly ... |
|||
|
Source: Los Alamos National Laboratory, Materials Science and Technology Division, Materials Corrosion & Environmental Effects Lab. |
|||
|
Collection: Materials Science |
|||
| 37 | Quan Yuan, B. G. Thomas, and S. P. Vanka, ISSTech 2003 (Conf. Proc.), Indianapolis, IN, USA, Apr. 27-30, 2003, ISS-AIME, Warrendale, PA, 2003, pp. 913-927. | ||
|
Summary: /Liquid Interface," Metallurgical Transactions A, Vol. 23A (2), 1992, 669-680. 20. J. Potschke and V. Rogge, "On... : Fluid flow, turbulence, large eddy simulation (LES), particle, continuous casting molds, steel... of inclusion particles and plays an important role in the quality of the steel. As shown in ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 38 | 85th Steelmaking Conference Proceedings, ISS-AIME, Warrendale, PA, 2002 pp. 431-452. EVALUATION AND CONTROL OF STEEL CLEANLINESS REVIEW | ||
|
Summary: AND CONTROL OF STEEL CLEANLINESS REVIEW Lifeng ZHANG, Brian G. THOMAS Dept of Mech. Engg., University... : wxhhome@public3.bta.net.cn Key words: Steel Cleanliness, Inclusions, Size Distribution, Morphology, Total... Oxygen, Nitrogen Pick-up INTRODUCTION The demand for cleaner steels increases every year. In addition |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 39 | Abstract submitted for Corrosion 2000 Orlando, Fl . Mar 26-31, 2000 | ||
|
Summary: . Perez2 , and J. Reyes2 1 Department of Physics, Old Dominion University, Norfolk, VA 23529, U. S. A. 2... OXIDES FROM SHORT-TERM ATMOSPHERIC CORROSION OF CARBON STEEL Rama Balasubramanian1 , Desmond C. Cook1 , T... . The performance of steels used for structural and industrial applications is affected by ... |
|||
|
Source: Cook, Desmond - Department of Physics, Old Dominion University |
|||
|
Collection: Physics |
|||
| 40 | 300Steel-I3 Steels 14 0.11 0.12 0.13 0.14 0.15 0.16 0.17 | ||
|
Summary: used in the present study. Steel Chemical Composition (wt. %) C Si Mn Mo Ti Al o (ppm) A2 0.22 2.05 3... .%) of the alloys used in this investigation. Al A2 C 0.22 0.22 Si 2.07 2.05 Mn 3.00 3.07 Mo 0.70 Al 0.011 0.005 Ti... 0.004 0.004 o 0.0035 0.0057 The alloys Al and ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 41 | Stiffness and Deflection of SteelConcrete Composite Beams under Negative Bending | ||
|
Summary: at the free end of cantilever can be calculated as 4 = P 2a2 L + a3 6EI + 4 = P 2a2 L + a3 6B 39 Fig. 7... reduction factor of this case is derived as 4 = 3 sech a L - a + sinh a - L cosh a a2 a - 3L 3 40 Eq. (40... Stiffness and Deflection of ... |
|||
|
Source: Cai, Steve C. S. - Department of Civil and Environmental Engineering, Louisiana State University |
|||
|
Collection: Engineering |
|||
| 42 | SELIEM, HATEM MOHAMED A. Behavior of Concrete Bridges Reinforced with High-Performance Steel Reinforcing Bars. (Under the direction of Dr. | ||
|
Summary: Weeks of Exposure (3 Wet-Dry Cycles)................................................... 241 A.2 12 Weeks... of exposure............................. 242 Table A.2: Weight of Corroded bars after 12 weeks of exposure... ... |
|||
|
Source: |
|||
|
Collection: Engineering |
|||
| 43 | Transmission Mssbauer Analysis of Nanophased Oxides formed on High Strength Steels | ||
|
Summary: Transmission Mössbauer Analysis of Nanophased Oxides formed on High Strength Steels R... , Bethlehem Steel Corporation, Bethlehem, PA 18016, USA Nanophased oxides found in the corrosion coatings... of atmospherically weathered steels have properties that are scientifically significant and industrially important |
|||
|
Source: Cook, Desmond - Department of Physics, Old Dominion University |
|||
|
Collection: Physics |
|||
| 44 | Metallurgical and Materials Transactions B, Vol. 38B, No. 1 (Feb.), 2007, pp. 63-83. INVESTIGATION OF FLUID FLOW AND STEEL CLEANLINESS IN THE | ||
|
Summary: -83. INVESTIGATION OF FLUID FLOW AND STEEL CLEANLINESS IN THE CONTINUOUS CASTING STRAND Authors: Prof. Lifeng Zhang... -73550203 Email: lifeng.zhang@material.ntnu.no Dr. Subo Yang Technical Research Center, Panzhihua Iron and Steel... @uiuc.edu #12;2 Abstract: Fluid flow in the mold region of the continuous slab caster at Panzhihua ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 45 | VICKERY, JOHN D. Fundamental Properties and Bond Characteristics of Chlorinated Polyvinyl Chloride and SS340 Adhesive for Evaluation of Steel Tank Linings. (Under | ||
|
Summary: -A: CPVC Tabulated Results .............................................. 147 A.2 Test I-B: CPVC Tabulated... Chloride and SS340 Adhesive for Evaluation of Steel Tank Linings. (Under the Direction of Dr. Sami Rizkalla... (CPVC) as well as the steel material at various temperatures and sustained stress levels |
|||
|
Source: |
|||
|
Collection: Engineering |
|||
| 46 | SteelConcrete Composite Beams Considering Shear Slip Effects | ||
|
Summary: .67 3.7 2.7 4.1 3.9 0.73 1.05 A1 0.54 8.4 7.3 8.8 8.8 0.87 1.05 A2 0.51 8.6 7.2 8.8 8.7 0.84 1.01 A3 0... 1969 A2 0.68 6.4 5.6 7.9 7.7 0.88 1.20 A3 0.67 4.2 3.1 1.7 4.5 0.74 1.07 502 / JOURNAL OF STRUCTURAL... SteelConcrete Composite Beams Considering Shear Slip Effects Jianguo Nie1 and ... |
|||
|
Source: Cai, Steve C. S. - Department of Civil and Environmental Engineering, Louisiana State University |
|||
|
Collection: Engineering |
|||
| 47 | PREFABRICATED CAGE SYSTEM FOR REINFORCING CONCRETE MEMBERS | ||
|
Summary: ............................................................ 271 A.2 Concrete mix design for NSC Specimens... : Concrete mix design used in HSC specimens. ............................................. 271 Table A.2... to resist applied loads. PCS is fabricated by perforating hollow steel ... |
|||
|
Source: Sezen, Halil - Department of Civil and Environmental Engineering and Geodetic Science, Ohio State University |
|||
|
Collection: Engineering |
|||
| 48 | Ecole doctorale 432 : Sciences des Metiers de l'Ingenieur Doctorat ParisTech | ||
|
Summary: Metallurgical evolution and creep strength of 9-12% Cr heat resistant steels at 600 C and 650 C Directeurs de th... 2011 #12;iv Abstract 9-12%Cr tempered martensite steels are used for high temperature (400-600 C... steels with improved long-term creep strength relies on a better understanding of the long |
|||
|
Source: Paris-Sud XI, Université de - Institut d'Optique, Laboratoire Charles-Fabry, Groupe d'Optique Atomique |
|||
|
Collection: Physics |
|||
| 49 | Steel Material Models Steel_1: Bilinear Steel Model with Isotropic Strain Hardening | ||
|
Summary: of compression yield envelope as proportion of yield strength after a plastic strain of a y2 A a2 : isotropic... strain of a y2 A a2 : isotropic hardening parameter (see explanation under a1) a3 : isotropic hardening... Steel Material Models Steel_1: Bilinear ... |
|||
|
Source: Filippou, Filip C. - Department of Civil and Environmental Engineering, University of California at Berkeley |
|||
|
Collection: Engineering |
|||
| 50 | Institute for the Study of International Aspects of Competition University of Rhode Island | ||
|
Summary: , and 6 percent in 1970. This does not include the share of stainless and tool steel producers... Consensus and Conflict in the Steel Market Hans Mueller ISIAC Working Paper 02-1 I S I A C #12;1 Consensus... and Conflict in the Steel Market* Hans Mueller TN Consulting 614 May Lane Murfreesboro, TN 37130-3234 ... |
|||
|
Source: Rhode Island, University of - Rhode Island Water Resources Center |
|||
|
Collection: Environmental Sciences and Ecology ; Geosciences |
|||
| 51 | Journal of Constructional Steel Research 63 (2007) 165174 www.elsevier.com/locate/jcsr | ||
|
Summary: notched at steel tube with 20 × 10 mm 5 SZ5S3A2 Fig. 1(b) 219 × 4.73 × 650 42.6 3150 6 SZ5S4E1 Fig. 1(c... ) 165 × 2.72 × 510 57.0 1750 16 SZ3S4A2 Fig. 1(b) 165 × 2.74 × 510 1785 Small holes notched at steel... 1 Fig. 1(a) 219 × 4.75 × 650 42.6 3150 4 ... |
|||
|
Source: Cai, Steve C. S. - Department of Civil and Environmental Engineering, Louisiana State University |
|||
|
Collection: Engineering |
|||
| 52 | M hi i C tti T lMachining -Cutting Tools ME 6222: Manufacturing Processes and Systems | ||
|
Summary: Cutting Tools · 1900: Development of high-speed steel by Taylor, et al.y y , add W, Mo, Cr, V to steel Fex... -30% by volume carbides20 30% by volume carbides can be used at twice the speed of tool steels ME 6222... : Manufacturing Processes and Systems Prof. J.S. Colton © GIT 2009 ... |
|||
|
Source: Colton, Jonathan S. - School of Mechanical Engineering, Georgia Institute of Technology |
|||
|
Collection: Engineering |
|||
| 53 | Improving the Performance of Creep- | ||
|
Summary: of CSEF Steels and Ni-based Alloys Highlights: · Using advanced tools like APS to better understand... Improving the Performance of Creep- Strength-Enhanced Ferritic Steels Mike Santella May 12, 2009 23... the Performance of Creep-Strength-Enhanced Ferritic Steels Purpose is to build fundamental ... |
|||
|
Source: Oak Ridge National Laboratory Fossil Energy Program |
|||
|
Collection: Fossil Fuels |
|||
| 54 | Technical Report Documentation Page 1. Report No. | ||
|
Summary: to loss of steel have been shown to be an effective tool. This paper includes results from laboratory... coated steels, galvanized steel, corrosion resistant steels, dual- phase steels, and stainless steels... . Also included are ... |
|||
|
Source: Texas at Austin, University of - Center for Transportation Research |
|||
|
Collection: Energy Storage, Conversion and Utilization |
|||
| 55 | Constructed Facilities Laboratory Department of Civil, Construction, | ||
|
Summary: DESIGN GUIDELINES FOR THE USE OF HM STRIPS: STRENGTHENING OF STEEL CONCRETE COMPOSITE BRIDGES WITH HIGH... -02 #12;1 Design Guidelines for the Use of HM Strips STRENGTHENING OF STEEL-CONCRETE COMPOSITE BRIDGES... of the literature and considerable personal experience in bonding CFRP materials to steel surfaces. 2. HIGH MODULUS |
|||
|
Source: NONE; Rizkalla, Sami H. - Department of Civil, Construction, and Environmental Engineering, North Carolina State University |
|||
|
Collection: Engineering |
|||
| 56 | Metallurgical Transactions B, Vol. 27B, No. 4 (August), 1996, pp. 617-632. Intermixing Model of Continuous Casting during a Grade Transition | ||
|
Summary: ABSTRACT To investigate the composition distribution that develops in continuously-cast steel during... procedures on the amount of intermixed steel, including standard sequence casting, flying tundish change... for wider ranges of steel products increases at the same time, the intermixing of dissimilar grades |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 57 | STUDY OF SHORT-TERM ATMOSPHERIC CORROSION OF CARBON STEEL Rama Balasubramanian1 | ||
|
Summary: 23529, U. S. A. 2 Programma de Corrosión del Golfo de México, Universidad Autonoma de Campeche, C. P... #12;STUDY OF SHORT-TERM ATMOSPHERIC CORROSION OF CARBON STEEL Rama Balasubramanian1 , Desmond C... formed on carbon steel atmospherically exposed for short times along the Gulf of México. Two sets |
|||
|
Source: Cook, Desmond - Department of Physics, Old Dominion University |
|||
|
Collection: Physics |
|||
| 58 | Master thesis Modelling of Microstructure in | ||
|
Summary: the following phases to be present: FCC_A1, BCC_A2, CEMENTITE and LIQUID. There is in each case, a pronounced... , BCC_A2, and CEMENTITE. All substitutional solutes except Si, Al and P were forced into paraequilibrium... Database version 1.1, 27 March 2000. The phases permitted to exist were FCC_A1, ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 59 | Overview of Fusion Technologies Fusion research requires a range of technologies such as those indicated below in the | ||
|
Summary: Radioactive sources 8A2 Laboratory radiation detectors (*), and spectrometers 8A3 Radiation monitors 8A4... 920 CONSULTANTS 9A1 Civil engineering and building consultants 9A2 Electrical engineering consultants... Steel pipes 133 Stainless steel pipes 134 Sanitary ... |
|||
|
Source: UK Fusion Center at Culham (UKAEA) |
|||
|
Collection: Plasma Physics and Fusion |
|||
| 60 | Water Modeling of Steel Flow, Air Entrainment and Filtration | ||
|
Summary: steel pouring appears to be a very promising tool. In particular, the use of heated water ( 60°C... Water Modeling of Steel Flow, Air Entrainment and Filtration Christoph Beckermann Associate... Beckermann, C., "Water Modeling of Steel Flow, Air Entrainment and Filtration," in Proceedings of the 46th |
|||
|
Source: Beckermann, Christoph - Department of Mechanical and Industrial Engineering, University of Iowa |
|||
|
Collection: Materials Science |
|||
| 61 | WELDING RESEARCH -s77WELDING JOURNAL | ||
|
Summary: Steel/AISC Steel Building Structures AWS D1.1/D1.1M 2004 STRUCTURAL WELDING CODE--STEEL $360 $270 AWS A2... Building Structures AWS D1.1/D1.1M 2004 STRUCTURAL WELDING CODE--STEEL $360 $270 AWS A2.4 1998 STANDARD... harder ... |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 62 | Heat-Transfer and Solidification Model of Continuous Slab Casting: CON1D | ||
|
Summary: of steel slabs is described, including phenomena in the mold and spray regions. The model includes a one... -dimensional (1-D) transient finite-difference calculation of heat conduction within the solidifying steel shell... and a thinner shell toward the bottom. This modeling tool can be applied to a wide range of practical ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 63 | High-performance polysilicon thin lm transistors on steel Ming Wu *, Yu Chen, Kiran Pangal, James C. Sturm, Sigurd Wagner | ||
|
Summary: , and the electron ®eld eect mobility in the saturated regime was obtained from a plot of I 1a2 ds vs Vgs at Vds Vgs... High-performance polysilicon thin ®lm transistors on steel substrates Ming Wu *, Yu Chen, Kiran... , Princeton, NJ 08544, USA Abstract We fabricated thin ®lm transistors in polycrystalline silicon on ... |
|||
|
Source: Sturm, James C.- Department of Electrical Engineering, Princeton University |
|||
|
Collection: Engineering |
|||
| 64 | SCHNERCH, "Design Guidelines for Strengthening Steel Beams", 1/10 DESIGN GUIDELINES FOR STRENGTHENING OF | ||
|
Summary: SCHNERCH, "Design Guidelines for Strengthening Steel Beams", 1/10 DESIGN GUIDELINES... FOR STRENGTHENING OF STEEL-CONCRETE COMPOSITE BEAMS WITH HIGH MODULUS CFRP MATERIALS David Schnerch Wiss, Janney... carbon fiber reinforced polymer (CFRP) materials for strengthening typical steel-concrete composite |
|||
|
Source: |
|||
|
Collection: Engineering |
|||
| 65 | JOURNAL DE PHYSIQUE Colloque C7, suppl6ment au no 11, Tome 47, Novembre 1986 | ||
|
Summary: .A.Mulford, Metall. TransTA, (1982) 745. /4/ K.Yoshihara, M.Tosa and K.Nii, J.Vac. Sci. Technol. A,2,4 (1985) 1804... SEGREGATION OF A TYPE 304 STAINLESS STEEL BY ATOM-PROBE K. TAKAHASHI, Y. ISHIKAWA, T. YOSHIMURA and 0... layer of a type 304 stainless steel for use in an -& vacuum systen was ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 66 | SA 2008-APR (3-2009) Supersedes (2-2009) Issue Affirmative Procurement Report | ||
|
Summary: sheets or web sites. Steel: The Environmental Protection Agency assumes that all steel contains a minimum... on Affirmative Procurement and associated EPA guidelines visit: http://www.epa.gov/epawaste/conserve/tools... -Pressure Pipe Steel 25 to 100% HDPE Plastic 100% PVC Plastic 25% Concrete ... |
|||
|
Source: Fuerschbach, Phillip - Joining and Coating Department, Materials and Process Sciences Center, Sandia National Laboratories |
|||
|
Collection: Materials Science |
|||
| 67 | By: Leif Karlsson, ESAB AB, Gothenburg. The large and steadily growing family of stainless steels can offer unique combina- | ||
|
Summary: stainless steels have been reported [17], but tool life and welding speed are still major obstacles... By: Leif Karlsson, ESAB AB, Gothenburg. The large and steadily growing family of stainless steels... temperature toughness, creep strength and formability. Although small in tonnage compared to mild steels |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 68 | Heat treatment and Magnetic Field Procedure A 32mm diameter bore resistive magnet with a 33T maximum field strength at the National High | ||
|
Summary: . The apparatus locates the specimen in the center of the bore mid length and can heat the steel specimen up... as summarized in Table 2. Table 1. Compositions of steel used in the current investigation Alloy C Si Mn Mo Cr... Co Al V Fe Slow Kinetic Steel SK (wt.%) 0.75 1.63 1.95 0.28 1.48 - 0.01 0.10 Balance SK (at.%) 3.34 3 |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 69 | Copper Precipitation Hardened, High Strength, Weldable Steel by Semyon Vaynman 1 | ||
|
Summary: (87) 623 (90) 27 A2 12.7 (0.5) 623 (90) 658 (95) 28 B1 15.9 (0.625) 595 (86) 685 (99) 25 B2 15.9 (0... ) A1 12.7 (0.5) 303 (222) 246 (180) 221 (162) 180 (132) A2 12.7 (0.5) 276 (202) >361 (>264) 264 (193... Copper Precipitation Hardened, High Strength, Weldable Steel by Semyon ... |
|||
|
Source: Northwestern University, Robert R. McCormick School of Engineering and Applied Science, Infrastructure Technology Institute |
|||
|
Collection: Engineering |
|||
| 70 | UCB/SEMM-90/14 STRUCTURAL ENGINEERING | ||
|
Summary: that the behavior of these members can be described by a plane stress field. Concrete and reinforcing steel... reinforcing steel and concrete through bond-slip to describe the behavior of the composite reinforced concrete... reinforcing steel model which is embedded inside a concrete element, but accounts for the effect of bond |
|||
|
Source: Filippou, Filip C. - Department of Civil and Environmental Engineering, University of California at Berkeley |
|||
|
Collection: Engineering |
|||
| 71 | UNCORRECTED Reliability analysis of hybrid ceramic/steel gun barrels | ||
|
Summary: UNCORRECTED PROOF Reliability analysis of hybrid ceramic/steel gun barrels M. GRUJICIC1 , J. R... stresses in the lined barrel, as introduced during shrink-fitting of the steel jacket over the ceramic... of the heat transfer coefficient. The results obtained reveal that due to thermal expansion of the steel |
|||
|
Source: Grujicic, Mica - Department of Mechanical Engineering, Clemson University |
|||
|
Collection: Engineering ; Energy Storage, Conversion and Utilization |
|||
| 72 | NISTIR 7563 DRAFT For Public Comments | ||
|
Summary: Design of Concrete and Steel Buildings National Institute of Standards and Technology Technology... and Steel Buildings Long T. Phan Therese P. McAllister John L. Gross Building and Fire Research Laboratory... that contains the current "best practice" for fire-resistant design of concrete and steel structures. The report |
|||
|
Source: National Institute of Standards and Technology (NIST), Ceramics Division |
|||
|
Collection: Materials Science |
|||
| 73 | Critical assessment: friction stir welding of H. K. D. H. Bhadeshia*1 | ||
|
Summary: without melting. In contrast, there are in general no cost effective tools available for steel... tool would have to go through in the case of steel would be much greater than that for aluminium unless... founded.19 There has been work on the girth welding using FSW of X65 steel pipe ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 74 | 1D subsurface electromagnetic fields excited by energized steel casing | ||
|
Summary: subject to SEG license or copyright; see Terms of Use at http://segdl.org/ #12;H A E i A 1 h ·A . 2 First... ,z Idz 4 0 ui exp ui z zi Ai exp uiz Bi exp uiz J0 d 1 i M 1 , A-2 m ,z Idz 4 0 Am exp umz Bm exp umz... the ensuing system of linear equations yields the coeffi- cients B0 , A1 , B1 , ... |
|||
|
Source: Torres-Verdín, Carlos - Department of Petroleum and Geosystems Engineering, University of Texas at Austin |
|||
|
Collection: Fossil Fuels ; Geosciences |
|||
| 75 | NIST NCSTAR 1-3D (Draft) Federal Building and Fire Safety Investigation of the | ||
|
Summary: Disaster Mechanical Properties of Structural Steels (Draft) William E. Luecke J. David Mc... Investigation of the World Trade Center Disaster Mechanical Properties of Structural Steels (Draft) William E... for steels from the World Trade Center (WTC): elastic, room-temperature tensile, room-temperature high strain |
|||
|
Source: National Institute of Standards and Technology (NIST), Ceramics Division |
|||
|
Collection: Materials Science |
|||
| 76 | Microstructural development and solidification cracking susceptibility of Cu deposits on steel: Part I | ||
|
Summary: -equilibrium solidification conditions. Introduction Tool steel is a widely used mold material due to its favorable mechanical... . The thermal conductivity of copper [1] is approximately 13 times that of AISI H-13 tool steel [2] at operating... in steel molds significantly decrease the ... |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 77 | Introduction of a novel, scrap-based, fully continuous steelmaking process Kent D. Peaslee | ||
|
Summary: , refine, alloy, and cast steel, using a system of interconnected vessels. In the proposed process... , the steel will be continuously melted in a 55-t Consteel EAF and flow through three refining vessels... of steelmaking while increasing productivity, production rates, and the steel quality. The design of a novel |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 78 | Introduction of a novel, scrap-based, fully continuous steelmaking process Kent D. Peaslee | ||
|
Summary: , refine, alloy, and cast steel, using a system of interconnected vessels. In the proposed process... , the steel will be continuously melted in a 55-t Consteel EAF and flow through three refining vessels... of steelmaking while increasing productivity, production rates, and the steel quality. The design of a novel |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 79 | Center for Precision Forming (CPF) 1 Forming of High Strength Steels | ||
|
Summary: /AHSS/UHSS · Accelerated wear in conventional cast iron tool when forming high strength steels due to high contact pressure... and temperature. · Tools steels with plasma nitrided coating preferred for forming. · Research is being conducted... steels IISI, 2006 ... |
|||
|
Source: Ghosh, Somnath - Department of Mechanical Engineering, Ohio State University |
|||
|
Collection: Materials Science |
|||
| 80 | Ris-R-1360(EN) Analysis of carbides and inclusions in | ||
|
Summary: Risø-R-1360(EN) Analysis of carbides and inclusions in high speed tool steels Kasper Tipsmark... information re- garding the role of carbides and inclusions in fractures of different high speed tool steels... tool steels are highly alloyed steels ... |
|||
|
Source: Risø National Laboratory |
|||
|
Collection: Multidisciplinary Databases and Resources |
|||
| 81 | Operations Research Contest 2008 Introduction | ||
|
Summary: in the steel processing industry. Coils of raw steel arrive at a plant, and need to be transformed into a final... consists of the following types of elements: [Input] Raw steel coils are hoisted and unwound. [Output... ] After going through a sequence of processing steps, the final steel product is wound up ... |
|||
|
Source: Könemann, Jochen - Department of Combinatorics and Optimization, University of Waterloo |
|||
|
Collection: Mathematics |
|||
| 82 | Characterisation and Development of Nanostructured, Ultrahigh | ||
|
Summary: . . . . . . . . . . . . . . . . . . . . 119 A.2 Experimental Procedures . . . . . . . . . . . . . . . . . . . . 120 A.3 Analysis... Characterisation and Development of Nanostructured, Ultrahigh Strength, and Ductile Bainitic Steels... -containing Silicon-containing Low-alloy Steels. Int. Mater. Rev., 2005. ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 83 | INCLUSIONS IN CONTINUOUS CASTING OF STEEL Lifeng Zhang (Dr.), Brian G. Thomas (Prof.) | ||
|
Summary: 1 INCLUSIONS IN CONTINUOUS CASTING OF STEEL Lifeng Zhang (Dr.), Brian G. Thomas (Prof.) 140 Mech... of inclusions in continuous casting of steel including both indigenous and exogenous inclusions, focusing... defects in continuous cast steel products are reviewed, such as flange cracked cans, slag spots, and line |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 84 | Brian G. Thomas, "University -Steel Industry Interaction", R&D in the Steel Industry, ILAFA 40 Congress, Buenos Aries, Sept. 12-15, 1999, Inst. Argentino de Siderurgia, pp. 65-67. | ||
|
Summary: Brian G. Thomas, "University - Steel Industry Interaction", R&D in the Steel Industry, ILAFA 40... Congress, Buenos Aries, Sept. 12-15, 1999, Inst. Argentino de Siderurgia, pp. 65-67. University - Steel... : 217-244-6534; Email: bgthomas@uiuc.edu Cooperation between the steel industry and Universities |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 85 | JOURNAL DE PHYSIQUE Colloque C6, supplgment au nOl1, Tome 48, novembre 1987 | ||
|
Summary: fcnmantles carbureest decrit. Abstract -Secondary hardeningprecipitates in six high speed tool steels have... , molybdenum, vanadium and chromium. High speed steel tools are shaped in the annealed condition... IN HIGH SPEED STEELS K. Stiller, S. Karagoz*, H.-0. Andr6n and H. ... |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 86 | Author's personal copy Investigation of effect of polyurea on response of steel plates | ||
|
Summary: finite-element code, LS-DYNA, and used to predict the experimental results (Amini et al., 2010a). 2... Author's personal copy Investigation of effect of polyurea on response of steel plates to impulsive... Keywords: Direct ballistic Steel-polyurea bilayer Fracture resistance a b s t r a c t We summarize |
|||
|
Source: Krstic, Miroslav - Department of Mechanical and Aerospace Engineering, University of California at San Diego |
|||
|
Collection: Engineering |
|||
| 87 | ISET Journal of Earthquake Technology, Technical Note, Vol. 46, No. 3-4, Sept.-Dec. 2009, pp. 133146 SOME ISSUES REGARDING THE STRUCTURAL IDEALIZATION OF | ||
|
Summary: Hills, U.S.A. 2. Colson, A. (1991). "Theoretical Modeling of Semirigid Connections Behavior", Journal... 146 SOME ISSUES REGARDING THE STRUCTURAL IDEALIZATION OF PERIMETER MOMENT-RESISTING STEEL FRAMES A. Reyes... and increase efficiency in designing the steel buildings made with W-shape members, the use of ... |
|||
|
Source: Gupta, Vinay Kumar - Department of Civil Engineering, Indian Institute of Technology Kanpur |
|||
|
Collection: Engineering |
|||
| 88 | Tempering of a Mixture of Bainite and Retained Austenite | ||
|
Summary: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 A.2 Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 A.3... D H Bhadeshia, Thermal Stability of Austenite Retained in Bainitic Steels, Materials Science... and British Petroleum (BP plc) for financial support. I am indebted to Tata ... |
|||
|
Source: Cambridge, University of - Department of Materials Science and Metallurgy, Phase Transformations and Complex Properties Research Group |
|||
|
Collection: Materials Science |
|||
| 89 | State of the Art in the Control of Inclusions during Steel Ingot Casting | ||
|
Summary: State of the Art in the Control of Inclusions during Steel Ingot Casting LIFENG ZHANG and BRIAN G... . THOMAS This article extensively reviews published research on inclusions in ingot steel and defects... on ingot products, methods to measure and detect inclusions in steel, the causes of exogenous inclusions |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 90 | MECH 321 ASSIGNMENT #5 March. 2011 Question 1 | ||
|
Summary: cutting tool because it is the hardest material Carbide glass cutter can also be used. (vi)Die steel... protection can be used to protect a steel pipe from corroding. (iii) Describe the corrosion behavior... of steel pipe can be achieved by (1) An external DC power supply, or by (2) Galvanic coupling with a ... |
|||
|
Source: Medraj, Mamoun - Department of Mechanical and Industrial Engineering, Concordia University |
|||
|
Collection: Engineering |
|||
| 91 | Center for Precision Forming (CPF) Evaluation of Die Materials/Coatings/Treatments in | ||
|
Summary: Variation 6 Pairs of inserts were tested with DP590 steel Two best performing tools Worst performing tool #12... and are on CPF web-site: · CPF-2.3/09/01, Tool Wear in Stamping of Advanced High Strength Steels (AHSS... in Commodity Tool Steels ... |
|||
|
Source: Ghosh, Somnath - Department of Mechanical Engineering, Ohio State University |
|||
|
Collection: Materials Science |
|||
| 92 | Process Metallurgy steel research int 77 (2006) No.7 1 | ||
|
Summary: . Therefore simulation becomes an important tool to get knowledge about the conditions in a steel continuous... ) ( ) ( ) slssssssssss QTfkhufhf t -=+ )( (A-2) The liquid enthalpy hl is defined as hl = hs + L, while hs... by adding Eq. (A-1) and Eq. (A-2): ( ) ( ) ( ... |
|||
|
Source: Thomas, Brian G. - Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign |
|||
|
Collection: Materials Science ; Engineering |
|||
| 93 | International Journal of Machine Tools & Manufacture 40 (2000) 713738 Process simulation using finite element method --prediction | ||
|
Summary: ). As an application, mach- ining of P-20 mold steel at 30 HRC hardness using uncoated carbide tooling was investigated... & Manufacture 40 (2000) 713738 1. Introduction High-speed milling (HSM) of tool steels (usually hardness 30 HRC... milling of P-20 mold steel (at a hardness of ... |
|||
|
Source: Ozel, Tugrul - Department of Industrial Engineering, Rutgers University |
|||
|
Collection: Engineering |
|||
| 94 | DAWOOD, MINA MAGDY RIAD. Bond Characteristics and Environmental Durability of CFRP Materials for Strengthening Steel Bridges and Structures. (Under the direction of Dr. | ||
|
Summary: .......................................................................................................................................211 FIGURE A.2 RESULTS FOR BEAM SPLICE CONFIGURATION 800-S(1) (A) MEASURED STRAINS AT THE SURFACE... Materials for Strengthening Steel Bridges and Structures. (Under the direction of Dr. Sami ... |
|||
|
Source: |
|||
|
Collection: Engineering |
|||
| 95 | EXPERIMENTALLY VALIDATED COMPATIBILITY STRUT AND TIE MODELING OF REINFORCED CONCRETE BRIDGE PIERS | ||
|
Summary: , this can be found in Appendix A. 2.1 Chapter Scope and Background Due to the complex nature of shear... , and beam- columns. This provides engineers with a supplementary analysis tool that can be used to assess... Figure 3.14 Nonlinear concrete and steel response |
|||
|
Source: Bracci, Joseph - Department of Civil Engineering, Texas A&M University |
|||
|
Collection: Engineering |
|||
| 96 | PROPOSED MODIFICATION TO THE ACI 318-02 CODE EQUATION ON BOND STRENGTH FOR MMFX STEEL | ||
|
Summary: f T f T ++= = (SI Units) [3a] ( ) 2 min2121 5005.0 10 13 bbd c c c b ddcl f T f... ST-263-1 PROPOSED MODIFICATION TO THE ACI 318-02 CODE EQUATION ON BOND STRENGTH FOR MMFX STEEL R... the bond characteristics of Micro-composite Multi-structural Formable reinforcing steel rebars |
|||
|
Source: |
|||
|
Collection: Engineering |
|||
| 97 | JOURNAL DE PHYSIQUE IV C3-5 11 Colloque C3, suppl. au Journal de Physique 111, Vol. 1, octobre 1991 | ||
|
Summary: Impact resistance OrJlmA2) I 637 I 722 I #12;JOURNAL DE PHYSIQUE IV T Fig.3Ammgement forthe hardeningof... STEEL-18G2A AND STEEL-14HNMBCu STRENGTHENED BY EXPLOSIVE AND COLD-ROLLED DEFORMATION J. PALCZEWSKI... -treated types of steel: ferritic-pearlite118G2AIand sorbitic 114HNMBW.To prove |
|||
|
Source: Ecole Polytechnique, Centre de mathématiques |
|||
|
Collection: Mathematics |
|||
| 98 | Composition Control in the Direct Laser-Deposition Process R.R. UNOCIC and J.N. DuPONT | ||
|
Summary: flow rate) on dilution was conducted for deposits of H-13 tool steel and copper powder on H-13 tool... (Albuquerque, NM), was used to deposit H-13 tool steel and copper onto grit- blasted H-13 tool steel substrates... of Processing Parameters ... |
|||
|
Source: DuPont, John N. - Department of Materials Science and Engineering, Lehigh University |
|||
|
Collection: Materials Science |
|||
| 99 | PhD Opportunity with the Department of Engineering Materials and Corus Predictions of the Behaviour of Inclusions Introduced by Alloy Impurities | ||
|
Summary: Steel The steel industry is delivering new steel grades, e... .g., advanced high strength steels, with highly critical properties for high... and establish their cost effective limits, and to develop tools ... |
|||
|
Source: Ojovan, Michael - Department of Engineering Materials, University of Southampton |
|||
|
Collection: Environmental Management and Restoration Technologies ; Fission and Nuclear Technologies |
|||
| 100 | NIST NCSTAR 1-3 (Draft) Federal Building and Fire Safety Investigation of the | ||
|
Summary: Disaster Mechanical and Metallurgical Analysis of Structural Steel (Draft) Frank W. Gayle Richard J. Fields... of Structural Steel (Draft) Frank W. Gayle Richard J. Fields William E. Luecke Stephen W. Banovic Timothy Foecke... and metallurgical analysis of structural steel from the World Trade Center (WTC), part of the National ... |
|||
|
Source: National Institute of Standards and Technology (NIST), Ceramics Division |
|||
|
Collection: Materials Science |
|||