Bibliographic Citation
| Document | This document is available for digitization by request/sponsorship. For copies of Journal Articles, please contact the Publisher or your local public or university library and refer to the information in the Resource Relation field. For copies of other documents, please see the Availability, Publisher, Research Organization, Resource Relation and/or Author (affiliation information) fields and/or Document Availability. |
|---|---|
| Title | Cooling-energy measurements of unoccupied single-family houses with attics containing radiant barriers |
| Creator/Author | Levins, W.P. ; Karnitz, M.A. |
| Publication Date | 1986 Jul 01 |
| OSTI Identifier | OSTI ID: 5462630; Legacy ID: DE86014343 |
| Report Number(s) | ORNL/CON-200 |
| DOE Contract Number | AC05-84OR21400 |
| Other Number(s) | Other: ON: DE86014343 |
| Resource Type | Technical Report |
| Resource Relation | Other Information: Portions of this document are illegible in microfiche products. Original copy available until stock is exhausted |
| Research Org | Oak Ridge National Lab., TN (USA) |
| Subject | 32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION; ATTICS; RADIANT HEAT TRANSFER; COOLING LOAD; HEAT FLUX; HOUSES; THERMAL INSULATION; BUILDINGS; ENERGY TRANSFER; HEAT TRANSFER; RESIDENTIAL BUILDINGS |
| Description/Abstract | Tests were conducted by Oak Ridge National Laboratory (ORNL) to determine the magnitude of the energy savings brought about by installing radiant barriers in the attics of single-family houses. The radiant barrier used for this test is a product with two reflective aluminum surfaces on a kraft paper base. The purpose of the radiant barrier is to reduce the radiant heat transfer component impinging on the fiberglass attic insulation. The radiant barrier works as a system in conjunction with an air space and can theoretically block up to 95% of far-infrared radiation heat transfer. The experiment was conducted in three unoccupied research houses that are operated by ORNL. Two variations on the installation of radiant barriers were studied. One house was used as the control house (no barrier was installed), while the other two were used to test the two different methods for installing the radiant barriers. In one house the barrier was laid on top of the attic fiberglass batt insulation, and in the other house, the barrier was attached to the underside of the roof trusses. The attics of all three houses were insulated with kraft-paper-faced R-19 fiberglass batt insulation. The results showed a savings in the cooling loads of 21% when the radiant barrier was laid on top of the attic fiberglass insulation and 13% with the radiant barrier attached to the underside of the roof trusses. The savings in electrical consumption were 17% and 9%, respectively. The electrical consumption data and the cooling load data indicate that the most effective way of installing the foil is to lay it on top of the fiberglass insulation. The radiant barriers reduced the measured peak ceiling heat fluxes by 39% for the case where the barrier was laid on top of the fiberglass insulation. The radiant barrier reduced the integrated heat flows from the attic to the house by approximately 30 to 35% over a 7-day time period. |
| Country of Publication | United States |
| Language | English |
| Format | Medium: X; Size: Pages: 53 |
| Availability | NTIS, PC A04/MF A01; 1. |
| System Entry Date | 2008 Feb 06 |
Top | |