Energy Citations Database
Bookmark and Share

Bibliographic Citation

 
Document
For copies of Journal Articles, please contact the Publisher or your local public or university library and refer to the information in the Resource Relation field.
For copies of other documents, please see the Availability, Publisher, Research Organization, Resource Relation and/or Author (affiliation information) fields and/or Document Availability.
Title Conditioning monitoring by microstructural evaluation of cumulative fatigue damage
Creator/Author Fukuoka, C. ; Nakagawa, Y.G. [Ishikawajima-Harima Heavy Industries Co., Ltd., Tokyo (Japan). Research Labs.] ; Lance, J.J. [Electric Power Research Inst., Charlotte, NC (United States). O and M Cost Control Technology] ; Pangborn, R.N. [Pennsylvania State Univ., University Park, PA (United States). Coll. of Engineering]
Publication Date1996 Dec 01
OSTI IdentifierOSTI ID: 438549
Other Number(s)Journal ID: MMTAEB; ISSN 1073-5623; TRN: TRN: IM9711%%9
Resource TypeJournal Article
Resource RelationJournal Name: Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science; Journal Volume: 27; Journal Issue: 12; Other Information: PBD: Dec 1996
Subject36 MATERIALS SCIENCE ;22 NUCLEAR REACTOR TECHNOLOGY; MICROSTRUCTURE; FATIGUE; STEELS; REACTORS; PRESSURE VESSELS; DAMAGE; CRACKS; DISLOCATIONS; ORIENTATION; SERVICE LIFE; CORRELATIONS
Description/AbstractThe objective of this work is to evaluate the damage induced below and above the fatigue limit ({Delta}{sigma}{sub t} = 360 MPa) in pressure vessel steels, such as SA508. Fatigue damage was induced in samples taken from an SA508 steel plate by various loading histories in order to examine the influence of prior cyclic loading below the fatigue limit. Cell-to-cell misorientation differences were measured by the selected area diffraction (SAD) method. Surface cracking was also studied by the replication method. Small cracks were observed after precycling both below and above the fatigue limit. It was, however, found that fatigue test bars had a longer lifetime after precycling below the fatigue limit, while precycling above the fatigue limit caused other specimens to fail even when subsequently cycled below the fatigue limit. Cell-to-cell misorientation usually increases with accumulation of fatigue damage, but it was found that the misorientations measured after precycling below the fatigue limit decreased again at the beginning of the subsequent cycling above the fatigue limit. It should be noted that the misorientation at failure was always about 4 to 5 deg, regardless of loading histories. Misorientation showed good correlation with the fatigue lifetime of the samples.
Country of PublicationUnited States
LanguageEnglish
FormatMedium: X; Size: pp. 3841-3852
System Entry Date2009 Dec 16

Top