Nomenclature and name assignment rules for the APS storage ring
Because the APS accelerators are moving into the fabrication/assembly/installation stage, it is important for consistent naming conventions to be used throughout the project. The intent of this note is to dictate the rules to be adhered to when naming devices in the storage ring. These rules are generic in nature, and shall be applied in principle to the other machines as well. It is essential that every component have a unique and, hopefully, easily recognizable name. Every ASD and XFD group, except for magnets, must interface with the control system. For this reason all device names were developed keeping in mind their actual function, such as controlling or monitoring some device in the ring. Even though magnets are not directly interfaced to the control system, their power supplies are; therefore, a magnet will have the same name as its associated power supply.
- Research Organization:
- Argonne National Lab. (ANL), Argonne, IL (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- W-31-109-ENG-38
- OSTI ID:
- 87846
- Report Number(s):
- LS-191; ON: DE95015224; TRN: 95:017834
- Resource Relation:
- Other Information: PBD: 16 Mar 1992
- Country of Publication:
- United States
- Language:
- English
Similar Records
Experimental Facilities Division/User Program Division technical progress report 1999-2000.
Power supply control units for APS ring magnets