Study of CO2 laser smoothing of surface roughness in fused silica
Small micrometer-sized roughness on optical surfaces, caused by laser damage and/or redeposition of laser ablated material, can cause local electric field intensification which may lead to damage initiation both on the optics and/or downstream. We examined the smoothing of etched periodic surface structures on SiO{sub 2} substrate with 10.6 {micro}m CO{sub 2} laser using atomic force microscopy. The characteristic surface tension driven mass flow of the glass under different laser parameters were simulated using computational fluid dynamics and correlated with experimental results. We found that during CO{sub 2} laser polishing the estimate viscosity of the silica glass appears to be higher than typical literature values measured at a temperature similar to the laser heating conditions. This discrepancy can be explained by the observation that at high temperature, a significant portion of the hydroxyl content in the layer of heated silica glass can diffuse out resulting in a much stiffer glass.
- Research Organization:
- Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 969078
- Report Number(s):
- LLNL-PROC-420985; TRN: US201001%%382
- Resource Relation:
- Conference: Presented at: Boulder Damage Symposium, Boulder, CO, United States, Sep 21 - Sep 23, 2009
- Country of Publication:
- United States
- Language:
- English
Similar Records
Downstream Intensification Effects Associated with CO2 Laser Mitigation of Fused Silica
Residual stress and damage-induced critical fracture on CO2 laser treated fused silica