Design and Construction of Test Coils for the MICE Coupling Solenoid Magnet
The superconducting coupling solenoid to be applied in the Muon Ionization Cooling Experiment (MICE) is made from copper matrix Nb-Ti conductors with inner radius of 750 mm, length of 285 mm and thickness of 102.5 mm at room temperature. The magnetic field up to 2.6 T at the magnet centerline is to keep the muons within the MICE RF cavities. Its self inductance is around 592 H and its magnet stored energy is about 13 MJ at a full current of 210 A for the worst operation case of the MICE channel. The stress induced inside the coil during cool down and charging is relatively high. Two test coils are to build and test in order to validate the design method and develop the fabrication technique required for the coupling coil winding, one is 350 mm inner diameter and full length same as the coupling coil, and the other is one-quarter length and 1.5 m diameter. The 1.5 m diameter coil will be charged to strain conditions that are greater than would be encountered in the coupling coil. This paper presents detailed design of the test coils as well as developed winding skills. The analyses on stress in coil assemblies, AC loss, and quench process are carried out.
- Research Organization:
- Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)
- Sponsoring Organization:
- Accelerator& Fusion Research Division; Engineering Division
- DOE Contract Number:
- DE-AC02-05CH11231
- OSTI ID:
- 948036
- Report Number(s):
- LBNL-1463E; TRN: US0901499
- Journal Information:
- IEEE Transactions on Applied Superconductivity, Vol. 19, Issue 3
- Country of Publication:
- United States
- Language:
- English
Similar Records
Design and Construction of a Prototype Solenoid Coil for MICE Coupling Magnets
Mechanical Behavior Analysis of a Test Coil for MICE Coupling Solenoid during Quench