Gas Test Loop Booster Fuel Hydraulic Testing
The Gas Test Loop (GTL) project is for the design of an adaptation to the Advanced Test Reactor (ATR) to create a fast-flux test space where fuels and materials for advanced reactor concepts can undergo irradiation testing. Incident to that design, it was found necessary to make use of special booster fuel to enhance the neutron flux in the reactor lobe in which the Gas Test Loop will be installed. Because the booster fuel is of a different composition and configuration from standard ATR fuel, it is necessary to qualify the booster fuel for use in the ATR. Part of that qualification is the determination that required thermal hydraulic criteria will be met under routine operation and under selected accident scenarios. The Hydraulic Testing task in the GTL project facilitates that determination by measuring flow coefficients (pressure drops) over various regions of the booster fuel over a range of primary coolant flow rates. A high-fidelity model of the NW lobe of the ATR with associated flow baffle, in-pile-tube, and below-core flow channels was designed, constructed and located in the Idaho State University Thermal Fluids Laboratory. A circulation loop was designed and constructed by the university to provide reactor-relevant water flow rates to the test system. Models of the four booster fuel elements required for GTL operation were fabricated from aluminum (no uranium or means of heating) and placed in the flow channel. One of these was instrumented with Pitot tubes to measure flow velocities in the channels between the three booster fuel plates and between the innermost and outermost plates and the side walls of the flow annulus. Flow coefficients in the range of 4 to 6.5 were determined from the measurements made for the upper and middle parts of the booster fuel elements. The flow coefficient for the lower end of the booster fuel and the sub-core flow channel was lower at 2.3.
- Research Organization:
- Idaho National Lab. (INL), Idaho Falls, ID (United States)
- Sponsoring Organization:
- DOE - NE
- DOE Contract Number:
- DE-AC07-99ID-13727
- OSTI ID:
- 911788
- Report Number(s):
- INL/EXT-06-11751; TRN: US0800136
- Country of Publication:
- United States
- Language:
- English
Similar Records
Estimation of critical flow velocity for collapse of booster fuel assembly
Boosted Fast Flux Loop Final Report
Related Subjects
11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS
ACCIDENTS
ALUMINIUM
CONFIGURATION
COOLANTS
FLOW RATE
FUEL ELEMENTS
FUEL PLATES
HEATING
HYDRAULICS
IRRADIATION
NEUTRON FLUX
PITOT TUBES
TEST REACTORS
TESTING
THERMAL HYDRAULICS
URANIUM
WATER
ATR
booster fuel
flow coefficient
Gas Test Loop
hydraulic testing