Isabelle dipole and quadrupole coil configurations
The coil configurations of the ISABELLE dipole and quadrupole magnets have been reviewed and a number of improvements were suggested for incorporation into the final design. The coil designs are basically single layer multiple block approximations to cosine current distributions, wound from a high aspect ratio non-keystoned braided conductor. The blocks are separated by knife-edge wedges to maximize the quench propagation velocity. The current density variation is obtained by an appropriate distribution of the spacer turns and, to a lesser degree, by the wedge locations. The use of inert turns is necessary to minimize the peak field enhancement both in the ends and in the two dimensional section. Schemes for deriving turns distributions yielding harmonic coefficients satisfying the stringent ISABELLE tolerances on field uniformity, while allowing for simplicity in winding and taking into account quench propagation considerations, will be discussed, as well as our approach to the coil end configuration.
- Research Organization:
- Brookhaven National Lab., Upton, NY (USA)
- DOE Contract Number:
- AC02-76CH00016
- OSTI ID:
- 6810896
- Report Number(s):
- BNL-28365; CONF-800980-19; TRN: 80-018834
- Resource Relation:
- Conference: Applied superconductivity conference, Santa Fe, NM, USA, 29 Sep 1980
- Country of Publication:
- United States
- Language:
- English
Similar Records
Prototype and proposed ISABELLE dipoles
Stability of superconducting ISABELLE dipole magnets
Related Subjects
71 CLASSICAL AND QUANTUM MECHANICS
GENERAL PHYSICS
ISABELLE STORAGE RINGS
SUPERCONDUCTING MAGNETS
MAGNET COILS
SPECIFICATIONS
BEAM BENDING MAGNETS
BEAM FOCUSING MAGNETS
MAGNETIC DIPOLES
MAGNETIC FIELD CONFIGURATIONS
QUADRUPOLES
DIPOLES
ELECTRIC COILS
ELECTRICAL EQUIPMENT
ELECTROMAGNETS
EQUIPMENT
MAGNETS
MULTIPOLES
STORAGE RINGS
SUPERCONDUCTING DEVICES
430303* - Particle Accelerators- Experimental Facilities & Equipment
420201 - Engineering- Cryogenic Equipment & Devices