skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Correction of the field in the SSC dipoles using superconductor on the wedges

Conference · · IEEE Trans. Magn.; (United States)
OSTI ID:6471248

The SSC colliding beam storage ring requires superconducting magnets capable of producing a magnetic field of 6.6 T which has very high accuracy. For many of the multipoles, that multipole must be reduced (at a radius of 1 centimeter) to the order of 0.2 parts in 10,000. This field accuracy is dictated by the physics of storing very small high-current proton beams at energies ranging from 1 TeV to 20 TeV. Magnetization of the superconductor can cause sextupole field errors of up to 6 parts in 10,000 at an injection field of 0.33 T at a radius of 1 centimeter. Saturation of the magnet iron can induce sextupole field errors of 1 to 2 parts in 10,000 at the full field of 6.6 T. Manufacturing errors can induce other multipole components, both normal and skew. The SSC coil has three wedges separating the superconducting coil blocks on the inner layer of the coil. These wedges must be accurately located. If the wedges have superconductors attached, one can correct all of the magnetic field multipoles (both normal and skew) from N=1 (dipole) to N=6 (12 pole). This paper describes this method of correction as it pertains to the SSC dipole magnet.

Research Organization:
Lawrence Berkeley Lab., Berkeley, CA (US)
OSTI ID:
6471248
Report Number(s):
CONF-870901-; TRN: 89-007329
Journal Information:
IEEE Trans. Magn.; (United States), Vol. 24:2; Conference: 10. international conference on magnet technology (MT-10), Boston, MA, USA, 21 Sep 1987
Country of Publication:
United States
Language:
English