skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Measurement of internal forces in superconducting accelerator magnets with strain gauge transducers

Conference ·
OSTI ID:6276641

An improved method has been developed for the measurement of internal forces in superconducting accelerator magnets, in particular the compressive stresses in coils and the end restraint forces on the coils. The transducers have been designed to provide improved sensitivity to purely mechanical strain by using bending mode deflections for sensing the applied loads. Strain gauge resistance measurements are made with a new system that eliminates sources of errors due to spurious resistance changes in interconnecting wiring and solder joints. The design of the transducers and their measurement system is presented along with a discussion of the method of compensation for thermal and magnetic effects, methods of calibration with typical calibration data, and measured effect in actual magnets of the thermal stress changes from cooldown and the Lorentz forces during magnet excitation. 13 figs., 1 tab.

Research Organization:
Brookhaven National Lab., Upton, NY (USA)
DOE Contract Number:
AC02-76CH00016
OSTI ID:
6276641
Report Number(s):
BNL-41979; CONF-880812-43; ON: DE89008158; TRN: 89-008566
Resource Relation:
Conference: Applied superconductivity conference, San Francisco, CA, USA, 21 Aug 1988; Other Information: Paper copy only, copy does not permit microfiche production
Country of Publication:
United States
Language:
English