Brightness limitations in multi-kiloampere electron beam sources
Heuristic relationships such as the Lawson-Penner criterion, used to scale Free Electron Laser (FEL) amplifier gain and efficiency over orders of magnitude in beam current and brightness, have no fundamental basis. The brightness of a given source is set by practical design choices such as peak voltage, cathode type, gun electrode geometry, and focusing field topology. The design of low emittance, high current electron guns has received considerable attention at Livermore over the past few years. The measured brightnesses of the Experimental Test Accelerator (ETA) and Advanced Test Accelerator (ATA) guns are less than predicted with the EBQ gun design code; this discrepancy is due to plasma effects from the present cold, plasma cathode in the code. The EBQ code is well suited to exploring the current limits of gridless relativistic Pierce columns with moderate current density (<50 A/cm/sup 2/) at the cathode. As EBQ uses a steady-state calculation it is not amenable for study of transient phenomena at the beam head. For this purpose, a Darwin approximation code, DPC, has been written. The main component in our experimental cathode development effort is a readily modified electron gun that will allow us to test many candidate cathode materials, types and electrode geometries at field stresses up to 1 MV/cm. 6 references, 6 figures.
- Research Organization:
- Lawrence Livermore National Lab., CA (USA); Lawrence Berkeley Lab., CA (USA)
- DOE Contract Number:
- AC03-76SF00098
- OSTI ID:
- 6226155
- Report Number(s):
- UCRL-90914; CONF-8409144-1; ON: DE84017417
- Resource Relation:
- Conference: Free electron laser conference, Castelgandolfo, Italy, 3 Sep 1984; Other Information: Portions are illegible in microfiche products
- Country of Publication:
- United States
- Language:
- English
Similar Records
Enhancing the brightness of high current electron guns
Improved brightness of the ATA injector