Modeling of a Modified Rocha Slot Test in welded tuff
The design of nuclear waste repositories in hard rock underground requires an understanding of how the jointed rock mass responds to the various loads introduced. The Nevada Nuclear Waste Storage Investigations (NNWSI) is conducting a series of field tests in G-Tunnel on the Nevada Test Site to characterize the behavior of welded tuff. In particular, one of the ways its modulus of deformation is being measured in situ is by means of a slot loaded by a pressurized flatjack. This is called the Modified Rocha Slot Test, after Manuel Rocha who pioneered investigations using this type of test. Numerical calculations were undertaken using the stress-wave dynamic finite difference code STEALTH. Using dynamic relaxation, the code is able to follow the quasi-static loading curve quite closely, so that the path-dependent aspects of the solution are captured economically. The material model (CAVS) represents an elastic-plastic rock matrix with evenly-spaced joints in three mutually perpendicular planes. The joints have nonlinear normal compliance, shear cohesion, and shear strength that depend on the slip history. Slip-induced dilation of the joints is also taken into consideration. Results of the calculations are presented which illustrate the stresses, deformations, and joint slippages resulting from the application of pressure loading in the slot. The stress field is remarkably sensitive to joint orientation and cohension, but rather insensitive to the normal compliance. The effect of a confining in situ stress field is also examined.
- Research Organization:
- RE/SPEC, Inc., Albuquerque, NM (United States); Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
- DOE Contract Number:
- AC04-76DP00789
- OSTI ID:
- 60141
- Report Number(s):
- SAND-83-1865A; ON: TI87012200
- Resource Relation:
- Other Information: PBD: [1987]
- Country of Publication:
- United States
- Language:
- English
Similar Records
Evaluation of the accuracy of continuum-based computational models in relation to field measurements in welded tuff
Results of pressurized-slot measurements in the G-Tunnel underground facility