Design of a dee vacuum vessel for Doublet III
The Doublet III tokamak is to be modified wherein the original 'doublet' plasma containment vacuum vessel will be exchanged with one of a large dee-shaped cross section. The basic dimensions of the dee vessel will allow plasmas of 1.7-m major radius, 0.7-m minor radius, and a vertical elongation of 1.8. Installation of a large dee vessel in Doublet III is made possible by the demountable toroidal field coils and the large, low-ripple volume they include. Ripple at the plasma edge will be less than one percent. The plasma parameters affecting the design of the vessel will be reviewed including plasma current, power, disruption time, allowable error field, impurity control techniques, pulse length, and limiter schemes. A driving requirement for the design of the vessel is to maximize the access to the plasma for auxiliary heating (both neutral beam injection and radio frequency heating), diagnostics, developmental component and material testing, and pumping. The dee vessel is structurally designed along the same lines as the present vessel: an Inconel 625, all-welded, continuous chamber in a corrugated sandwich construction. An overview of the vessel design and its solutions to the design criteria will be presented. An overview will also be presented of the entire modification project which includes replacement of some coils, and addition of support structure, limiters and vessel armor, and power system components.
- Research Organization:
- GA Technologies, Inc., San Diego, California 92138
- DOE Contract Number:
- AT03-76ET51011
- OSTI ID:
- 5879383
- Journal Information:
- J. Vac. Sci. Technol., A; (United States), Vol. 1:2
- Country of Publication:
- United States
- Language:
- English
Similar Records
Modification of Doublet III to a large Dee facility
Unique design of Doublet and Big Dee vacuum vessels