Control of quench distortion for steel parts
- Japan Society for Heat Treatment, Tokyo (Japan)
There are two types in quench distortion of steel parts: thermal distortion and transformation distortion. Quench distortion is caused mainly by uneven cooling rate of steel parts from Austenitising temperature. The rapid cooled side is lengthened (convex deformation); the slow cooled side is shortened (concave deformation). So, to control the quench distortion, it is necessary to regulate the cooling rate of steel parts during quenching. TWO COMPONENTS produce the quench distortion of steel parts: the thermal stress and transformation stress. Generally, the effect of the thermal stress on the quench distortion is stronger than the transformation stress. The quench distortion is caused by uneven cooling rate of the steel parts, from Austenitising temperature to Ms point and Ms-Mf range. So, to control the quench distortion, it is very important to regulate the cooling rate of the steel parts during quenching. The purpose of this paper is to present the results of a study on the occurrence of quench distortion of steel parts and its control.
- OSTI ID:
- 484257
- Report Number(s):
- CONF-961140-; TRN: 97:000168-0018
- Resource Relation:
- Conference: 2. international conference on quenching and the control of distortion, Cleveland, OH (United States), 4-7 Nov 1996; Other Information: PBD: 1996; Related Information: Is Part Of 2nd International conference on quenching and the control of distortion; Totten, G.E.; Howes, M.A.H.; Sjoestrom, S.J.; Funatani, Kiyoshi [eds.]; PB: 652 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Distortion at CVD-coating and gas quenched tools steels
Reduced pressure quenching oil and distortion