skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Impurities in chemical bath deposited CdS films for Cu(In,Ga)Se{sub 2} solar cells and their stability

Journal Article · · Journal of the Electrochemical Society
DOI:https://doi.org/10.1149/1.1837066· OSTI ID:413418

The highest efficiencies for Cu(In,Ga)Se{sub 2}-based thin film solar cells have been achieved with CdS films prepared by a solution growth method known as the chemical bath deposition (CBD) technique. The impurity content in such cadmium sulfide films has been examined. By means of secondary ion mass spectroscopy, Fourier transform infrared spectroscopy, Rutherford backscattering spectrometry, and X-ray photoelectron spectroscopy, the authors conclude that CBD grown CdS films contain {approximately}11 atom percent (a/o) O, {approximately}5 a/o N as well as C and H. Unlike previously published results, cadmium carbonate and water are found to be the main oxygen-containing compounds. No clear evidence of cadmium hydroxide and/or oxide is found. Carbon-nitrogen bonds originating from any pseudohalogenic ions [e.g., cyanamide, thiocyanate, cyanate, cyanide] are identified as the main nitrogen impurity. To investigate the stability of the impurities, the films were subjected to air annealing (200 to 350 C) as well as storage (1.5 month) in three different environments: desiccator, humidity of 79%, and at 100 C. Air annealing results in a decrease of the water content, which disappears at 350 C. On exposure to humidity, the water content increases somewhat. The CN bonds are very sensitive to all treatments, but do not totally decompose, even at 350 C. In contrast, CdCO{sub 3} is much more stable.

Sponsoring Organization:
USDOE
OSTI ID:
413418
Journal Information:
Journal of the Electrochemical Society, Vol. 143, Issue 8; Other Information: PBD: Aug 1996
Country of Publication:
United States
Language:
English