skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Development of detergent additives for automotive fuels in other countries

Journal Article · · Chemistry and Technology of Fuels and Oils

With increasing demands on environmental protection and with the production of reformulated unleaded motor fuels, new and effective detergent additives are urgently needed. A number of monographs and scientific works have been devoted to problems involved in the development and application of such additives. Since the mid-1980s in the United States and certain other countries, a crisis has been noted in the application of detergent additives. It has been found that certain types of detergents not only fail to give the required cleaning effect, but even promote the formation of deposits. This situation can be attributed primarily to the development of automotive gasoline engines with direct fuel injection. In the United States in 1989, about 90% of all automotive vehicles were equipped with such engines, which have very definite advantages in fuel economy, less smoking, and a number of other areas. However, after a few thousand kilometers of travel, the characteristics of these engines deteriorate, and undesirable changes are observed, including excessive fuel consumption, a reduction of the vehicle speed, and increased contents of carbon monoxide in the exhaust. These changes occur because of deposit formation in the fuel intake system, particularly on the intake valves. As the deposits continue to accumulate, the engines gradually experience an increase in octane number demand for engine operation without knocking. This phenomenon, which is known in American publications as {open_quotes}octane requirement increase{close_quotes} or ORI (Russian initialism RTOCh, literal translation, {open_quotes}increase of requirements for octane number{close_quotes}), continues until a certain equilibrium octane number is reached. This equilibrium value may change, depending on the engine design and other factors. In all cases, however, the ORI of modern engines is significant, amount to 2-14 octane numbers.

Sponsoring Organization:
USDOE
OSTI ID:
39291
Journal Information:
Chemistry and Technology of Fuels and Oils, Vol. 30, Issue 1-2; Other Information: PBD: Sep 1994; TN: Translated from Khimiya i Tekhnologiya Tekhnologiya Topliv i Masel; No. 1, 36-38(Jan 1994)
Country of Publication:
United States
Language:
English

Similar Records

The effects of intake valve detergent structure on combustion chamber deposits (CCD)
Conference · Sun Dec 31 00:00:00 EST 1995 · OSTI ID:39291

Synthetic gasoline additive packages
Journal Article · Sun May 01 00:00:00 EDT 1994 · Automotive Engineering; (United States) · OSTI ID:39291

Octane-requirement increase of 1988 and 1989 model vehicles
Technical Report · Thu Aug 01 00:00:00 EDT 1991 · OSTI ID:39291