skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Novel approaches to the production of higher alcohols from synthesis gas. Quarterly technical progress report No. 17, October 1, 1994-- December 31, 1994

Technical Report ·
DOI:https://doi.org/10.2172/369630· OSTI ID:369630

A series of experiments in which the stirrer speed was varied during a methanol synthesis run with BASF S3-86 catalyst showed that mass transfer limitations were present at 750 psig reactor pressure and at space velocities of 5000 and 10000 sl/kg(cat.)-hr.. There was no effect of stirrer speed on reaction rate at 2500 psig reactor pressure and 16500 sl/kg(cat.)-hr. space velocity. However, this was probably due to a close approach to equilibrium rather than to the lack of a mass transfer effect. The most plausible explanation for the presence of a mass transfer influence is the position of the gas feed dip tube relative to the agitator impeller. A second set of stirrer speed experiments using the same catalyst showed that feeding into the reactor headspace produced much lower reaction rates, compared with gas feed through a dip tube. The headspace feed also showed a strong dependence on stirrer speed, consistent with the dip tube feed results. In a ``blank` run at 375{degree}C with decahydronaphthalene, about 110 mL of the initial charge of 150 mL remained in the reactor after 73 hours of operation at 375{degree}C and 850 psig of hydrogen. The rate of hydrocarbon evolution was low throughout the run. Decalin is the most stable liquid identified to date. Three stirred autoclave runs with a commercial, high-pressure methanol synthesis catalyst (zinc chromite) slurried in decahydronaphthalene ended son after the initial catalyst reduction due to failures of the liquid return pump in the overhead system. However, the catalyst appeared to be reduced and the liquid appeared to be stable. 4 figs., 1 tab.

Research Organization:
North Carolina State Univ., Raleigh, NC (United States). Dept. of Chemical Engineering
Sponsoring Organization:
USDOE, Washington, DC (United States)
DOE Contract Number:
AC22-90PC90043
OSTI ID:
369630
Report Number(s):
DOE/PC/90043-T18; ON: DE96050305
Resource Relation:
Other Information: PBD: 5 Jul 1996
Country of Publication:
United States
Language:
English