Heat Transfer Coefficient at Cast-Mold Interface During Centrifugal Casting: Calculation of Air Gap
- Montanuniversitaet Leoben, Chair of Simulation and Modeling Metallurgical Processes, Metallurgy Department (Austria)
- Christian Doppler Laboratory for “Advanced Process Simulation of Solidification and Melting” (Austria)
During centrifugal casting, the thermal resistance at the cast-mold interface represents a main blockage mechanism for heat transfer. In addition to the refractory coating, an air gap begins to form due to the shrinkage of the casting and the mold expansion, under the continuous influence of strong centrifugal forces. Here, the heat transfer coefficient at the cast-mold interface h has been determined from calculations of the air gap thickness d{sub a} based on a plane stress model taking into account thermoelastic stresses, centrifugal forces, plastic deformations, and a temperature-dependent Young’s modulus. The numerical approach proposed here is rather novel and tries to offer an alternative to the empirical formulas usually used in numerical simulations for a description of a time-dependent heat transfer coefficient h. Several numerical tests were performed for different coating thicknesses d{sub C}, rotation rates Ω, and temperatures of solidus T{sub sol}. Results demonstrated that the scenario at the interface is unique for each set of parameters, hindering the possibility of employing empirical formulas without a preceding experiment being performed. Initial values of h are simply equivalent to the ratio of the coating thermal conductivity and its thickness (~ 1000 Wm{sup −2} K{sup −1}). Later, when the air gap is formed, h drops exponentially to values at least one order of magnitude smaller (~ 100 Wm{sup −2} K{sup −1}).
- OSTI ID:
- 22857956
- Journal Information:
- Metallurgical and Materials Transactions B, Process Metallurgy and Materials Processing Science, Vol. 49, Issue 3; Other Information: Copyright (c) 2018 The Minerals, Metals & Materials Society and ASM International; Article Copyright (c) 2018 The Author(s); http://www.springer-ny.com; Country of input: International Atomic Energy Agency (IAEA); ISSN 1073-5615
- Country of Publication:
- United States
- Language:
- English
Similar Records
Relationship Between Casting Distortion, Mold Filling, and Interfacial Heat Transfer in Sand Molds
A Combined Experimental and Computational Approach for the Design of Mold Topography that Leads to Desired Ingot Surface and Microstructure in Aluminum Casting.