Strengthening polylactic acid (PLA) composites with poly(methyl methacrylate)-functionalized cellulose nanofibrils created through grafting-through emulsion polymerization

Senkum, Hathaithep; Kelly, Peter V.; Ahmad, Ahmad A. L.; Shams Es-haghi, Siamak; Gramlich, William M.

doi:10.1039/D3LP00248A

Title: Strengthening polylactic acid (PLA) composites with poly(methyl methacrylate)-functionalized cellulose nanofibrils created through grafting-through emulsion polymerization

Journal Article · Thu Mar 21 00:00:00 EDT 2024 · RSC Applied Polymers

DOI:https://doi.org/10.1039/D3LP00248A· OSTI ID:2282804

Senkum, Hathaithep ^[1]; Kelly, Peter V. ^[1];

^[1];

^[2];

^[3]

Department of Chemistry, University of Maine, Orono, ME, 04469, USA, Advanced Structures and Composites Center, University of Maine, Orono, ME 04469, USA
Advanced Structures and Composites Center, University of Maine, Orono, ME 04469, USA, Department of Chemical and Biomedical Engineering, University of Maine, Orono, ME, 04469, USA
Department of Chemistry, University of Maine, Orono, ME, 04469, USA, Advanced Structures and Composites Center, University of Maine, Orono, ME 04469, USA, Forest Bioproducts Research Institute, University of Maine, Orono, ME, 04469, USA

Aqueous surfactant free emulsion grafting-through polymerization produced poly(methyl methacrylate) coated cellulose nanofibrils that retained microstructure and strengthened poly(lactic acid) composites.

View Journal Article

Cite

Export

Save

Sponsoring Organization:: USDOE

Grant/Contract Number:: DEAC05-00OR22725 (subcontract number 4000174848)

OSTI ID:: 2282804

Journal Information:: RSC Applied Polymers, Journal Name: RSC Applied Polymers Vol. 2 Journal Issue: 2; ISSN 2755-371X

Publisher:: Royal Society of Chemistry (RSC)Copyright Statement

Country of Publication:: Country unknown/Code not available

Language:: English

References (53)

The effective surface energy of heterogeneous solids measured by inverse gas chromatography at infinite dilution Sun, Chenhang; Berg, John C. Journal of Colloid and Interface Science, Vol. 260, Issue 2 https://doi.org/10.1016/S0021-9797(02)00238-2	journal	April 2003
Glass fiber reinforced PLA composite with enhanced mechanical properties, thermal behavior, and foaming ability Wang, Guilong; Zhang, Dongmei; Wan, Gengping Polymer, Vol. 181 https://doi.org/10.1016/j.polymer.2019.121803	journal	October 2019
Drying cellulose nanofibrils: in search of a suitable method Peng, Yucheng; Gardner, Douglas J.; Han, Yousoo Cellulose, Vol. 19, Issue 1 https://doi.org/10.1007/s10570-011-9630-z	journal	December 2011
Biopolymer blends of polyhydroxybutyrate and polylactic acid reinforced with cellulose nanofibrils Aydemir, Deniz; Gardner, Douglas J. Carbohydrate Polymers, Vol. 250 https://doi.org/10.1016/j.carbpol.2020.116867	journal	December 2020
Polylactide cellulose-based nanocomposites Vatansever, Emre; Arslan, Dogan; Nofar, Mohammadreza International Journal of Biological Macromolecules, Vol. 137 https://doi.org/10.1016/j.ijbiomac.2019.06.205	journal	September 2019
Recycling technologies for thermoset composite materials—current status Pickering, S. J. Composites Part A: Applied Science and Manufacturing, Vol. 37, Issue 8 https://doi.org/10.1016/j.compositesa.2005.05.030	journal	August 2006
Highly absorbent cellulose nanofibrils aerogels prepared by supercritical drying Darpentigny, Clémentine; Nonglaton, Guillaume; Bras, Julien Carbohydrate Polymers, Vol. 229 https://doi.org/10.1016/j.carbpol.2019.115560	journal	February 2020
Optimizing lignocellulosic nanofibril dimensions and morphology by mechanical refining for enhanced adhesion Kelly, Peter V.; Gardner, Douglas J.; Gramlich, William M. Carbohydrate Polymers, Vol. 273 https://doi.org/10.1016/j.carbpol.2021.118566	journal	December 2021
Recent advances in surface-modified cellulose nanofibrils Rol, Fleur; Belgacem, Mohamed Naceur; Gandini, Alessandro Progress in Polymer Science, Vol. 88 https://doi.org/10.1016/j.progpolymsci.2018.09.002	journal	January 2019
The determination of the surface energy of conducting polymers by inverse gas chromatography at infinite dilution Chehimi, Mohamed M.; Abel, Marie-Laure; Perruchot, Christian Synthetic Metals, Vol. 104, Issue 1 https://doi.org/10.1016/S0379-6779(99)00040-5	journal	June 1999
All-Aqueous SI-ARGET ATRP from Cellulose Nanofibrils Using Hydrophilic and Hydrophobic Monomers Kaldéus, Tahani; Telaretti Leggieri, Maria Rosella; Cobo Sanchez, Carmen Biomacromolecules, Vol. 20, Issue 5 https://doi.org/10.1021/acs.biomac.9b00153	journal	March 2019
Rheology of PLA/regenerated cellulose nanocomposites prepared by the pickering emulsion process: Network formation and modeling Cui, Lu; Yi, Lan; Wang, Yating Materials & Design, Vol. 206 https://doi.org/10.1016/j.matdes.2021.109774	journal	August 2021
Cellulose and the role of hydrogen bonds: not in charge of everything Wohlert, Malin; Benselfelt, Tobias; Wågberg, Lars Cellulose, Vol. 29, Issue 1 https://doi.org/10.1007/s10570-021-04325-4	journal	November 2021
Thermal degradation of poly(lactic acid) measured by thermogravimetry coupled to Fourier transform infrared spectroscopy Zou, Hantao; Yi, Changhai; Wang, Luoxin Journal of Thermal Analysis and Calorimetry, Vol. 97, Issue 3 https://doi.org/10.1007/s10973-009-0121-5	journal	June 2009
Rheological and mechanical properties of polylactide nanocomposites reinforced with the cellulose nanofibers with various surface treatments Ying, Zeren; Wu, Defeng; Wang, Zhifeng Cellulose, Vol. 25, Issue 7 https://doi.org/10.1007/s10570-018-1862-8	journal	May 2018
Improved mechanical properties of polylactide nanocomposites-reinforced with cellulose nanofibrils through interfacial engineering via amine-functionalization Lu, Yuan; Cueva, Mario Calderón; Lara-Curzio, Edgar Carbohydrate Polymers, Vol. 131 https://doi.org/10.1016/j.carbpol.2015.05.047	journal	October 2015
Non-isothermal kinetics of cold crystallization in multicomponent PLA/thermoplastic polyurethane/nanofiller system Kratochvíl, Jaroslav; Kelnar, Ivan Journal of Thermal Analysis and Calorimetry, Vol. 130, Issue 2 https://doi.org/10.1007/s10973-017-6417-y	journal	May 2017
Thermoplastic Processing of PLA/Cellulose Nanomaterials Composites Mokhena, T.; Sefadi, J.; Sadiku, E. Polymers, Vol. 10, Issue 12 https://doi.org/10.3390/polym10121363	journal	December 2018
High modulus biocomposites via additive manufacturing: Cellulose nanofibril networks as “microsponges” Tekinalp, Halil L.; Meng, Xiangtao; Lu, Yuan Composites Part B: Engineering, Vol. 173 https://doi.org/10.1016/j.compositesb.2019.05.028	journal	September 2019
Surface-modified and oven-dried microfibrillated cellulose reinforced biocomposites: Cellulose network enabled high performance Li, Kai; Mcgrady, Denver; Zhao, Xianhui Carbohydrate Polymers, Vol. 256 https://doi.org/10.1016/j.carbpol.2020.117525	journal	March 2021
Thermal properties of spray-dried cellulose nanofibril-reinforced polypropylene composites from extrusion-based additive manufacturing Wang, Lu; Palmer, Janice; Tajvidi, Mehdi Journal of Thermal Analysis and Calorimetry, Vol. 136, Issue 3 https://doi.org/10.1007/s10973-018-7759-9	journal	October 2018
A review of research and application of polylactic acid composites Li, Xiangrui; Lin, Yu; Liu, Mingli Journal of Applied Polymer Science, Vol. 140, Issue 7 https://doi.org/10.1002/app.53477	journal	December 2022
Isothermal and non-isothermal cold crystallization kinetics of polylactide/cellulose nanocrystal (PLA/CNC) nanocomposites Alanalp, Mine Begum; Ozdemir, Burcu; Nofar, Mohammadreza Journal of Thermal Analysis and Calorimetry, Vol. 147, Issue 24 https://doi.org/10.1007/s10973-022-11598-9	journal	September 2022
Aqueous Polymer Modification of Cellulose Nanofibrils by Grafting‐Through a Reactive Methacrylate Group Kelly, Peter V.; Cheng, Peng; Gardner, Douglas J. Macromolecular Rapid Communications, Vol. 42, Issue 3 https://doi.org/10.1002/marc.202000531	journal	November 2020
Estimation of the dispersive component of surface energy of polymer-grafted lignocellulosic fibers with inverse gas chromatography Riedl, B.; Kamdem, P. D. Journal of Adhesion Science and Technology, Vol. 6, Issue 9 https://doi.org/10.1163/156856192X00935	journal	January 1992
Long and entangled native cellulose I nanofibers allow flexible aerogels and hierarchically porous templates for functionalities Pääkkö, Marjo; Vapaavuori, Jaana; Silvennoinen, Riitta Soft Matter, Vol. 4, Issue 12 https://doi.org/10.1039/b810371b	journal	January 2008
Water redispersible cellulose nanofibrils adsorbed with carboxymethyl cellulose Butchosa, Núria; Zhou, Qi Cellulose, Vol. 21, Issue 6 https://doi.org/10.1007/s10570-014-0452-7	journal	September 2014
Topochemistry of cellulose nanofibers resulting from molecular and polymer grafting Ahmadi, Mobina; Behzad, Tayebeh; Bagheri, Rouhollah Cellulose, Vol. 24, Issue 5 https://doi.org/10.1007/s10570-017-1254-5	journal	March 2017
Mechanical properties of cellulose nanofiber (CNF) reinforced polylactic acid (PLA) prepared by twin screw extrusion Jonoobi, Mehdi; Harun, Jalaluddin; Mathew, Aji P. Composites Science and Technology, Vol. 70, Issue 12 https://doi.org/10.1016/j.compscitech.2010.07.005	journal	October 2010
Inverse gas chromatography in the examination of surface properties of experimental dental composites Adamska, Katarzyna; Sandomierski, Mariusz; Buchwald, Zuzanna Polymer Testing, Vol. 90 https://doi.org/10.1016/j.polymertesting.2020.106697	journal	October 2020
Mechanisms contributing to mechanical property changes in composites of polypropylene reinforced with spray-dried cellulose nanofibrils Wang, Lu; Roach, Alec W.; Gardner, Douglas J. Cellulose, Vol. 25, Issue 1 https://doi.org/10.1007/s10570-017-1556-7	journal	November 2017
Preparation and characterization of modified cellulose nanofibers reinforced polylactic acid nanocomposite Abdulkhani, Ali; Hosseinzadeh, Jaber; Ashori, Alireza Polymer Testing, Vol. 35 https://doi.org/10.1016/j.polymertesting.2014.03.002	journal	May 2014
A review on the tensile properties of natural fiber reinforced polymer composites Ku, H.; Wang, H.; Pattarachaiyakoop, N. Composites Part B: Engineering, Vol. 42, Issue 4 https://doi.org/10.1016/j.compositesb.2011.01.010	journal	June 2011
A critical review on recycling of end-of-life carbon fibre/glass fibre reinforced composites waste using pyrolysis towards a circular economy Naqvi, S. R.; Prabhakara, H. Mysore; Bramer, E. A. Resources, Conservation and Recycling, Vol. 136 https://doi.org/10.1016/j.resconrec.2018.04.013	journal	September 2018
A comprehensive review on polylactic acid (PLA) – Synthesis, processing and application in food packaging Swetha, T. Angelin; Bora, Abhispa; Mohanrasu, K. International Journal of Biological Macromolecules, Vol. 234 https://doi.org/10.1016/j.ijbiomac.2023.123715	journal	April 2023
Green and Efficient Synthesis of Dispersible Cellulose Nanocrystals in Biobased Polyesters for Engineering Applications Spinella, Stephen; Samuel, Cédric; Raquez, Jean-Marie ACS Sustainable Chemistry & Engineering, Vol. 4, Issue 5 https://doi.org/10.1021/acssuschemeng.5b01611	journal	April 2016
Poly (vinyl alcohol) as a capping agent in oven dried cellulose nanofibrils Velásquez-Cock, J.; Gómez H., B. E.; Posada, P. Carbohydrate Polymers, Vol. 179 https://doi.org/10.1016/j.carbpol.2017.09.089	journal	January 2018
Determination of optical constants of polymethyl methacrylate films from IR reflection-absorption spectra Jitian, Simion; Bratu, Ioan; Lazar, Mihaela D. PROCESSES IN ISOTOPES AND MOLECULES (PIM 2011), AIP Conference Proceedings https://doi.org/10.1063/1.3681958	conference	January 2012
Polymer-Grafted Cellulose Nanofibrils with Enhanced Interfacial Compatibility for Stronger Poly(lactic acid) Composites Kelly, Peter V.; Shams Es-haghi, Siamak; Lamm, Meghan E. ACS Applied Polymer Materials, Vol. 5, Issue 5 https://doi.org/10.1021/acsapm.3c00312	journal	April 2023
Determination of BET Specific Surface Area of Hydrate-Anhydrate Systems Susceptible to Phase Transformation Using Inverse Gas Chromatography Bui, Minhthi; Nagapudi, Karthik; Chakravarty, Paroma AAPS PharmSciTech, Vol. 23, Issue 7 https://doi.org/10.1208/s12249-022-02395-6	journal	August 2022
The effect of polymer grafting on the mechanical properties of PEG‐grafted cellulose nanocrystals in poly(lactic acid) Macke, Nicholas; Hemmingsen, Christina M.; Rowan, Stuart J. Journal of Polymer Science, Vol. 60, Issue 24 https://doi.org/10.1002/pol.20220127	journal	May 2022
Miscibility and phase structure of binary blends of polylactide and poly(methyl methacrylate) Zhang, Guobao; Zhang, Jianming; Wang, Shenguo Journal of Polymer Science Part B: Polymer Physics, Vol. 41, Issue 1 https://doi.org/10.1002/polb.10353	journal	November 2002
Alternative modification by grafting in bamboo cellulose nanofibrils: A potential option to improve compatibility and tunable surface energy in bionanocomposites Rodríguez-Ramírez, C. A.; Dufresne, Alain; D'Accorso, Norma International Journal of Biological Macromolecules, Vol. 211 https://doi.org/10.1016/j.ijbiomac.2022.05.050	journal	June 2022
Bacterial Cellulose Nanopaper as Reinforcement for Polylactide Composites: Renewable Thermoplastic NanoPaPreg Montrikittiphant, Thanit; Tang, Min; Lee, Koon‐Yang Macromolecular Rapid Communications, Vol. 35, Issue 19 https://doi.org/10.1002/marc.201400181	journal	July 2014
Influence of Lactic Acid Surface Modification of Cellulose Nanofibrils on the Properties of Cellulose Nanofibril Films and Cellulose Nanofibril–Poly(lactic acid) Composites Lafia-Araga, Ruth Anayimi; Sabo, Ronald; Nabinejad, Omid Biomolecules, Vol. 11, Issue 9 https://doi.org/10.3390/biom11091346	journal	September 2021
Effects of an aqueous surface modification via a grafting-through polymerization approach on the fibrillation and drying of bleached softwood kraft pulp Christau, Stephanie; Alyamac-Seydibeyoglu, Elif; Thayer, Kayla Cellulose, Vol. 30, Issue 2 https://doi.org/10.1007/s10570-022-04938-3	journal	November 2022
Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive review Farah, Shady; Anderson, Daniel G.; Langer, Robert Advanced Drug Delivery Reviews, Vol. 107 https://doi.org/10.1016/j.addr.2016.06.012	journal	December 2016
Free radical graft copolymerization of nanofibrillated cellulose with acrylic monomers Littunen, Kuisma; Hippi, Ulla; Johansson, Leena-Sisko Carbohydrate Polymers, Vol. 84, Issue 3 https://doi.org/10.1016/j.carbpol.2010.12.064	journal	March 2011
Comparison of the Properties of Cellulose Nanocrystals and Cellulose Nanofibrils Isolated from Bacteria, Tunicate, and Wood Processed Using Acid, Enzymatic, Mechanical, and Oxidative Methods Sacui, Iulia A.; Nieuwendaal, Ryan C.; Burnett, Daniel J. ACS Applied Materials & Interfaces, Vol. 6, Issue 9 https://doi.org/10.1021/am500359f	journal	April 2014
Impact of Aqueous Grafting of Polystyrene through Methacrylate-Modified Cellulose Nanofibrils on Emulsion Stabilization and Drying Behavior Driscoll, Megan E.; Kelly, Peter V.; Gramlich, William M. Langmuir, Vol. 39, Issue 20 https://doi.org/10.1021/acs.langmuir.3c00321	journal	May 2023
Improving tensile strength and impact toughness of plasticized poly(lactic acid) biocomposites by incorporating nanofibrillated cellulose Tian, Jiarong; Cao, Zhongqi; Qian, Shaoping Nanotechnology Reviews, Vol. 11, Issue 1 https://doi.org/10.1515/ntrev-2022-0142	journal	June 2022
Strong and thermal-resistance glass fiber-reinforced polylactic acid (PLA) composites enabled by heat treatment Wang, Guilong; Zhang, Dongmei; Li, Bo International Journal of Biological Macromolecules, Vol. 129 https://doi.org/10.1016/j.ijbiomac.2019.02.020	journal	May 2019
Melt Spinning of Cellulose Nanofibril/Polylactic Acid (CNF/PLA) Composite Fibers For High Stiffness Clarkson, Caitlyn M.; El Awad Azrak, Sami M.; Chowdhury, Reaz ACS Applied Polymer Materials, Vol. 1, Issue 2 https://doi.org/10.1021/acsapm.8b00030	journal	December 2018

Similar Records

Aqueous Polymer Modification of Cellulose Nanofibrils by Grafting‐Through a Reactive Methacrylate Group

Journal Article · Wed Nov 18 00:00:00 EST 2020 · Macromolecular Rapid Communications · OSTI ID:2282804

Kelly, Peter V.; Cheng, Peng; Gardner, Douglas J.; +1 more

Polymer-Grafted Cellulose Nanofibrils with Enhanced Interfacial Compatibility for Stronger Poly(lactic acid) Composites

Journal Article · Tue Apr 25 00:00:00 EDT 2023 · ACS Applied Polymer Materials · OSTI ID:2282804

Kelly, Peter V.; Shams Es-haghi, Siamak; Lamm, Meghan E.; +4 more

SYNTHESIS AND PROPERTIES OF THE GRAFTED COPOLYMERS POLY(METHYL METHACRYLATE)-POLYSTYRENE. I. POLYMERIZATION OF STYRENE INITIATED BY PREIRRADIATED POLY(METHYL METHACRYLATE)

Journal Article · Fri Jun 01 00:00:00 EDT 1962 · Journal de Chimie Physique (France) Merged with Rev. Gen. Colloides to form J. Chim. Phys. Rev. Gen. Colloides · OSTI ID:2282804

Mita, I

Title: Strengthening polylactic acid (PLA) composites with poly(methyl methacrylate)-functionalized cellulose nanofibrils created through grafting-through emulsion polymerization

Citation Formats

References (53)

Similar Records

Related Subjects