A comparison of EBSD based strain indicators for the study of Fe-3Si steel subjected to cyclic loading
- Université Lille 1 sciences et technologies, UMET – UMR CNRS 8207/ENSCL/Université de Lille, team Métallurgie Physique et Génie des Matériaux, Bâtiment C6, 59655 Villeneuve d'Ascq (France)
- Valeo Engine Electrical Systems, 2 Rue André Boulle, 94046 Créteil (France)
- Max-Planck-Institut für Eisenforschung, Abteilung Mikrostrukturphysik und Umformtechnik, Max-Planck-Strasse 1, 40237 Düsseldorf (Germany)
The current work aims at proposing an EBSD-based indicator for fatigue damage of a Fe-3Si steel. At the same time direct observation of dislocation structures is provided by electron channelling contrast imaging (ECCI). The investigation consisted in processing the EBSD data from patterns collected on specimen subjected to low cycle fatigue. It revealed two different regimes depending on the applied total strain variation which is explained by the identification of the dislocations structures and their evolution. At low strain variation, strain accommodation occurs by planar glide of dislocations uniformly distributed throughout the grains. No misorientation evolution is observed. At higher strain variation, the vein-channel structure is observed within the grain and the wall-channel structure in the vicinity of grain boundaries. The misorientation between these two dislocation structures is evaluated at about 0.7° which is detected by the EBSD analyses and explains the increase of the different misorientation based criteria. The EBSD study enables also the prediction of crack initiation mode. Finally, this study points out the limits of the EBSD technique as no misorientation evolution is detected at small strain variation. Indeed, the lattice distortion is too weak to be detected by conventional EBSD. - Highlights: • Microstructure investigation of the fatigue behaviour of an iron-silicon steel • Use of cECCI to investigate the fatigue dislocations structures • Characterisation of local plastic accommodation through EBSD misorientation criteria.
- OSTI ID:
- 22587147
- Journal Information:
- Materials Characterization, Vol. 115; Other Information: Copyright (c) 2016 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.; Country of input: International Atomic Energy Agency (IAEA); ISSN 1044-5803
- Country of Publication:
- United States
- Language:
- English
Similar Records
Characterization of twin boundaries in an Fe–17.5Mn–0.56C twinning induced plasticity steel
Microstructural Characterization of Deformation Localization at Small Strains in a Neutron Irradiated 304 Stainless Steel