Cryogenic DT and D{sub 2} targets for inertial confinement fusion
- Laboratory for Laser Energetics, University of Rochester, Rochester, New York 14623 (United States)
Ignition target designs for inertial confinement fusion on the National Ignition Facility (NIF) [W. J. Hogan et al., Nucl. Fusion 41, 567 (2001)] are based on a spherical ablator containing a solid, cryogenic-fuel layer of deuterium and tritium. The need for solid-fuel layers was recognized more than 30 years ago and considerable effort has resulted in the production of cryogenic targets that meet most of the critical fabrication tolerances for ignition on the NIF. At the University of Rochester's Laboratory for Laser Energetics (LLE), the inner-ice surface of cryogenic DT capsules formed using {beta}-layering meets the surface-smoothness requirement for ignition (<1-{mu}m rms in all modes). Prototype x-ray-drive cryogenic targets being produced at the Lawrence Livermore National Laboratory are nearing the tolerances required for ignition on the NIF. At LLE, these cryogenic DT (and D{sub 2}) capsules are being imploded on the direct-drive 60-beam, 30-kJ UV OMEGA laser [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)]. The designs of these cryogenic targets for OMEGA are energy scaled from the baseline direct-drive-ignition design for the NIF. Significant progress with the formation and characterization of cryogenic targets for both direct and x-ray drive will be described. Results from recent cryogenic implosions will also be presented.
- OSTI ID:
- 20975093
- Journal Information:
- Physics of Plasmas, Vol. 14, Issue 5; Other Information: DOI: 10.1063/1.2671844; (c) 2007 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 1070-664X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Improving cryogenic deuterium tritium implosion performance on OMEGA
Direct-drive, cryogenic target implosions on OMEGA