Advanced Direct Liquefaction Concepts for PETC Generic Units - Phase II
The results of Laboratory and Bench-Scale experiments and supporting technical and economic assessments conducted under DOE Contract No. DE-AC22-91PC91040 are reported for the period July 1, 1997 to September 30, 1997. This contract is with the University of Kentucky Research Foundation which supports work with the University of Kentucky Center for Applied Energy Research, CONSOL, Inc., LDP Associates, and Hydrocarbon Technologies, Inc. This work involves the introduction into the basic two stage liquefaction process several novel concepts which include dispersed lower-cost catalysts, coal cleaning by oil agglomeration, and distillate hydrotreating and dewaxing. Results are reported from experiments in which various methods were tested to activate dispersed Mo precursors. Several oxothiomolybdates precursors having S/Mo ratios from two to six were prepared. Another having a S/Mo ratio of eleven was also prepared that contained an excess of sulfur. In the catalyst screening test, none of these precursors exhibited an activity enhancement that might suggest that adding sulfur into the structure of the Mo precursors would be beneficial to the process. In another series of experiments, AHM impregnated coal slurried in the reaction mixture was pretreated withH S/H under pressure and successively heated for 30 min at 120, 250 2 2 and 360 C. THF conversions in the catalyst screening test were not affected while resid conversions o increased such that pretreated coals impregnated with 100 ppm Mo gave conversions equivalent to untreated coals impregnated with 300 ppm fresh Mo. Cobalt, nickel and potassium phosphomolybdates were prepared and tested as bimetallic precursors. The thermal stability of these compounds was evaluated in TG/MS to determine whether the presence of the added metal would stabilize the Keggin structure at reaction temperature. Coals impregnated with these salts showed the Ni and Co salts gave the same THF conversion as PMA while the Ni salt gave higher resid conversion than the other salts and untreated PMA. To activate PMA, a series of sulfided PMA materials was prepared by subjecting the crystalline acid to H S/H at 125-450 C. The chemistries 2 2 o of these partially sulfided materials are reported as well as the reactivity of several impregnated coals. None of the coals impregnated with these sulfided PMA materials gave conversions that exceeded PMA. Reports covering work by the subcontractors for this reporting period have not been received. A report from CONSOL covering a previous reporting period is included.
- Research Organization:
- Federal Energy Technology Center, Morgantown, WV, and Pittsburgh, PA (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC22-91PC91040
- OSTI ID:
- 1974
- Report Number(s):
- DE-AC22-91PC91040-08; ON: DE00001974
- Country of Publication:
- United States
- Language:
- English
Similar Records
Evaluation of dispersed Mo catalysts for direct coal liquefaction
Evaluation of dispersed Mo catalysts for direct coal liquefaction