Densification of an YSZ electrolyte layer prepared by chemical/electrochemical vapor deposition for metal-supported solid oxide fuel cells
|
journal
|
September 2017 |
High temperature water electrolysis using metal supported solid oxide electrolyser cells (SOEC)
|
journal
|
October 2008 |
A high‐performance solid oxide fuel cell with a layered electrolyte for reduced temperatures
|
journal
|
May 2020 |
Surface resistivity and bonding strength of atmosphere plasma sprayed copper‐coated alumina substrate
|
journal
|
November 2020 |
Atmospheric Plasma-Sprayed Metal-Supported Solid Oxide Fuel Cells with Varying Cathode Microstructures
|
journal
|
June 2015 |
The beneficial effects of straight open large pores in the support on steam electrolysis performance of electrode-supported solid oxide electrolysis cell
|
journal
|
January 2018 |
Metal-supported solid oxide fuel cell operated at 400–600°C
|
journal
|
May 2007 |
Suspension Plasma Spray and Performance Characterization of Half Cells with NiO/YSZ Anode and YSZ Electrolyte
|
journal
|
October 2011 |
Effect of casting slurry composition on anode support microstructure and cell performance of MT-SOFCs by phase inversion method
|
journal
|
December 2014 |
Characterization of microstructural defects in plasma-sprayed thermal barrier coatings
|
journal
|
September 1995 |
Microchanneled anode supports of solid oxide fuel cells
|
journal
|
May 2014 |
High performance metal-supported intermediate temperature solid oxide fuel cells fabricated by atmospheric plasma spraying
|
journal
|
February 2011 |
Novel architectured metal-supported solid oxide fuel cells with Mo-doped SrFeO3−δ electrocatalysts
|
journal
|
December 2014 |
Preparation of dense ScSZ thin films by plasma spraying with densified ScSZ powders
|
journal
|
February 2021 |
Facile fabrication strategy of highly dense gadolinium-doped ceria/yttria-stabilized zirconia bilayer electrolyte via cold isostatic pressing for low temperature solid oxide fuel cells
|
journal
|
March 2019 |
Effects of discharge mode and fuel treating temperature on the fuel utilization of direct carbon solid oxide fuel cell
|
journal
|
January 2019 |
Permeability and Microstructure of Suspension Plasma-Sprayed YSZ Electrolytes for SOFCs on Various Substrates
|
journal
|
October 2012 |
Development of ScSZ Electrolyte by Very Low Pressure Plasma Spraying for High-Performance Metal-Supported SOFCs
|
journal
|
December 2019 |
Recent progress in integration of reforming catalyst on metal-supported SOFC for hydrocarbon and logistic fuels
|
journal
|
September 2021 |
Electrically Conductive Diffusion barrier layers for Metal-Supported SOFC
|
journal
|
September 2008 |
Thermal Plasma Spraying Applied on Solid Oxide Fuel Cells
|
journal
|
April 2013 |
High performance metal-supported solid oxide fuel cells with infiltrated electrodes
|
journal
|
January 2019 |
Thermally sprayed high-performance porous metal-supported solid oxide fuel cells with nanostructured La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3−δ cathodes
|
journal
|
January 2016 |
Phase relations and conductivity of Sr- and La-zirconates
|
journal
|
July 1992 |
Plasma sprayed metal supported YSZ/Ni–LSGM–LSCF ITSOFC with nanostructured anode
|
journal
|
May 2008 |
Asymmetric La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ membrane with reduced concentration polarization prepared by phase-inversion tape casting and warm pressing
|
journal
|
July 2017 |
Unique performance of thermal barrier coatings made of yttria‐stabilized zirconia at extreme temperatures (>1500°C)
|
journal
|
September 2020 |
Characterization of Ni–YSZ anodes for solid oxide fuel cells fabricated by suspension plasma spraying with axial feedstock injection
|
journal
|
December 2013 |
Nondestructive measurements of residual stress in air plasma‐sprayed thermal barrier coatings
|
journal
|
November 2020 |
Durability of symmetric-structured metal-supported solid oxide fuel cells
|
journal
|
November 2017 |
Interaction of a ceria-based anode functional layer with a stabilized zirconia electrolyte: Considerations from a materials perspective
|
journal
|
October 2017 |
Electrochemical Performance of Cobalt-free Nd 0.5 Ba 0.5 Fe 1-x Ni x O 3- δ Cathode Materials for Intermediate Temperature Solid Oxide Fuel Cells
|
journal
|
March 2016 |
Performance and DRT analysis of P-SOFCs fabricated using new phase inversion combined tape casting technology
|
journal
|
January 2017 |
Effects of Anode Microstructure on Mechanical and Electrochemical Properties for Anode-Supported Microtubular Solid Oxide Fuel Cells
|
journal
|
October 2013 |
Nanostructured Composite Cathodes by Suspension Plasma Spraying for SOFC Applications
|
journal
|
April 2011 |
Progress in metal-supported solid oxide fuel cells: A review
|
journal
|
August 2010 |
Tailoring SOFC Electrode Microstructures for Improved Performance
|
journal
|
June 2018 |
Optimization of anode structure for intermediate temperature solid oxide fuel cell via phase-inversion cotape casting
|
journal
|
April 2017 |
Y0.08Sr0.88TiO3–CeO2 composite as a diffusion barrier layer for stainless-steel supported solid oxide fuel cell
|
journal
|
March 2016 |
Electrochemical Properties of La 0.5 Sr 0.5 Co 0.8 M 0.2 O 3-δ (M=Mn, Fe, Ni, Cu) Perovskite Cathodes for IT-SOFCs
|
journal
|
February 2016 |
Performances of Plasma Sprayed Metal-supported Solid Oxide Fuel Cell and Stack
|
journal
|
November 2018 |
Efficient Electro-Catalysts for Enhancing Surface Activity and Stability of SOFC Cathodes
|
journal
|
May 2013 |
Performance of La0.8Sr0.2Ga0.8Mg0.2O3-based SOFCs with atmospheric plasma sprayed La-doped CeO2 buffer layer
|
journal
|
June 2018 |
Atmospheric plasma-sprayed La 0.8 Sr 0.2 Ga 0.8 Mg 0.2 O 3 electrolyte membranes for intermediate-temperature solid oxide fuel cells
|
journal
|
January 2015 |
Solvent effects on the morphology and performance of the anode substrates for solid oxide fuel cells
|
journal
|
September 2017 |