Microstructure and mechanical properties of oxide dispersion strengthened FeCoNi concentrated solid solution alloys

Guo, Yuanhang; Li, Mingyang; Li, Pei; Chen, Cunguang; Zhan, Qian; Chang, Yongqin; Zhang, Yanwen

doi:10.1016/j.jallcom.2019.153104

Title: Microstructure and mechanical properties of oxide dispersion strengthened FeCoNi concentrated solid solution alloys

Journal Article · Wed Nov 20 00:00:00 EST 2019 · Journal of Alloys and Compounds

DOI:https://doi.org/10.1016/j.jallcom.2019.153104· OSTI ID:1761646

Guo, Yuanhang ^[1]; Li, Mingyang ^[1]; Li, Pei ^[1];

^[1]; Zhan, Qian ^[1];

^[1];

^[2]

Univ. of Science and Technology, Beijing (China)
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States)

Microstructure and mechanical properties of two kinds of oxide dispersion strengthened concentrated solid solution alloys (CSAs), FeCoNi-1.5Y₂O₃ (FCNY) and FeCoNi-1.2Ti-1.5Y₂O₃ (FCNTY), are studied through a comparing investigation with FeCoNi (FCN) CSAs. All these alloys are fabricated by mechanical alloying, spark plasma sintering, hot rolling and annealing treatment. For three kinds of alloys, both the as-milled powders and bulk materials are of single face-centered cubic structure. Electron backscattered diffraction results reveal that the texture transformation is suppressed during the hot rolling process because the movement of grain boundaries is hindered by the oxide particles. Compared with FCN CSAs, grains are refined by 43% and 47% for FCNY and FCNTY CSAs, respectively. Nano-sized Y₂O₃ (monoclinic structure) and Y₂Ti₂O₇ (pyrochlore structure) particles are uniformly distributed in FCNY and FCNTY CSAs, respectively. Both Y2O3 and Y2Ti2O7 particles show a semi-coherent relationship with the matrix. Yield strength of FCN, FCNY and FCNTY CSAs is 559, 981 and 1050 MPa, respectively. Theoretical calculations illustrate that high strength of FCNY and FCNTY CSAs comes from refined grains and high-density nano-sized oxide particles.

View Accepted Manuscript (DOE)

View Accepted Manuscript (Publisher)

Cite

Export

Save

Research Organization:: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

Sponsoring Organization:: USDOE Office of Science (SC), Basic Energy Sciences (BES); National Natural Science Foundation of China (NSFC); Beijing Municipal Natural Science Foundation

Grant/Contract Number:: AC05-00OR22725; 11775017; 11175014; FRF-GF-17-B5; 2162023

OSTI ID:: 1761646

Alternate ID(s):: OSTI ID: 1702034

Journal Information:: Journal of Alloys and Compounds, Vol. 820, Issue N/A; ISSN 0925-8388

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (67)

Effects of compositional complexity on the ion-irradiation induced swelling and hardening in Ni-containing equiatomic alloys Jin, K.; Lu, C.; Wang, L. M. Scripta Materialia, Vol. 119 https://doi.org/10.1016/j.scriptamat.2016.03.030	journal	July 2016
CoCrFeMnNi high entropy alloy matrix nanocomposite with addition of Al 2 O 3 Rogal, Łukasz; Kalita, Damian; Litynska-Dobrzynska, Lidia Intermetallics, Vol. 86 https://doi.org/10.1016/j.intermet.2017.03.019	journal	July 2017
X-ray line broadening from filed aluminium and wolfram Williamson, G. K.; Hall, W. H. Acta Metallurgica, Vol. 1, Issue 1 https://doi.org/10.1016/0001-6160(53)90006-6	journal	January 1953
Y2O3 evolution and dispersion refinement in Co-base ODS alloys Zhang, Lin; Ukai, Shigeharu; Hoshino, Takeshi Acta Materialia, Vol. 57, Issue 12 https://doi.org/10.1016/j.actamat.2009.04.033	journal	July 2009
Mechanical activated synthesis of alumina dispersed FeNiCoCrAlMn high entropy alloy Prasad, Hari; Singh, Sheela; Panigrahi, Bharat B. Journal of Alloys and Compounds, Vol. 692 https://doi.org/10.1016/j.jallcom.2016.09.080	journal	January 2017
Enhancing radiation tolerance by controlling defect mobility and migration pathways in multicomponent single-phase alloys Lu, Chenyang; Niu, Liangliang; Chen, Nanjun Nature Communications, Vol. 7, Issue 1 https://doi.org/10.1038/ncomms13564	journal	December 2016
Formation of nanoscale complex oxide particles in mechanically alloyed ferritic steel Yamashita *, S.; Ohtsuka, S.; Akasaka, N. Philosophical Magazine Letters, Vol. 84, Issue 8 https://doi.org/10.1080/09500830412331303609	journal	July 2004
Effect of Nb addition on the microstructure and properties of AlCoCrFeNi high-entropy alloy Ma, S. G.; Zhang, Y. Materials Science and Engineering: A, Vol. 532 https://doi.org/10.1016/j.msea.2011.10.110	journal	January 2012
Correlation between lattice distortion and friction stress in Ni-based equiatomic alloys Zhao, Y. Y.; Nieh, T. G. Intermetallics, Vol. 86 https://doi.org/10.1016/j.intermet.2017.03.011	journal	July 2017
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures Wu, Z.; Bei, H.; Pharr, G. M. Acta Materialia, Vol. 81 https://doi.org/10.1016/j.actamat.2014.08.026	journal	December 2014
Microstructural observation and tensile properties of ODS-304 austenitic steel Wang, Man; Zhou, Zhangjian; Sun, Hongying Materials Science and Engineering: A, Vol. 559 https://doi.org/10.1016/j.msea.2012.08.099	journal	January 2013
Effect of cold-rolling on microstructure, texture and mechanical properties of an equiatomic FeCrCuMnNi high entropy alloy Shabani, Ali; Toroghinejad, Mohammad Reza; Shafyei, Ali Materialia, Vol. 1 https://doi.org/10.1016/j.mtla.2018.06.004	journal	September 2018
Joining of 14YWT and F82H by friction stir welding Hoelzer, D. T.; Unocic, K. A.; Sokolov, M. A. Journal of Nuclear Materials, Vol. 442, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2013.04.027	journal	November 2013
Phase transitions in yttrium oxide at high pressure studied by Raman spectroscopy Husson, E.; Proust, C.; Gillet, P. Materials Research Bulletin, Vol. 34, Issue 12-13 https://doi.org/10.1016/S0025-5408(99)00205-6	journal	September 1999
Characterization of Oxide Dispersed AlCoCrFe High Entropy Alloy Synthesized by Mechanical Alloying and Spark Plasma Sintering Praveen, S.; Anupam, Ameey; Sirasani, Teja Transactions of the Indian Institute of Metals, Vol. 66, Issue 4 https://doi.org/10.1007/s12666-013-0268-4	journal	May 2013
In-situ TEM observation of structural changes in nano-crystalline CoCrCuFeNi multicomponent high-entropy alloy (HEA) under fast electron irradiation by high voltage electron microscopy (HVEM) Nagase, Takeshi; Rack, Philip D.; Noh, Joo Hyon Intermetallics, Vol. 59 https://doi.org/10.1016/j.intermet.2014.12.007	journal	April 2015
Mechanism of grain refinement in an equiatomic medium-entropy alloy CrCoNi during hot deformation He, Guoai; Zhao, Yifan; Gan, Bin Journal of Alloys and Compounds, Vol. 815 https://doi.org/10.1016/j.jallcom.2019.152382	journal	January 2020
Strengthening mechanisms of MgSi alloys Mabuchi, M.; Higashi, K. Acta Materialia, Vol. 44, Issue 11 https://doi.org/10.1016/1359-6454(96)00072-9	journal	November 1996
Microstructural stability of 11Cr ODS steel Yamashiro, Tetsuya; Ukai, Shigeharu; Oono, Naoko Journal of Nuclear Materials, Vol. 472 https://doi.org/10.1016/j.jnucmat.2016.01.002	journal	April 2016
Study of the deformation mechanisms in a Fe–14% Cr ODS alloy Praud, M.; Mompiou, F.; Malaplate, J. Journal of Nuclear Materials, Vol. 428, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2011.10.046	journal	September 2012
Texture formation in metal alloys with cubic crystal structures Kestens, L. A. I.; Pirgazi, H. Materials Science and Technology, Vol. 32, Issue 13 https://doi.org/10.1080/02670836.2016.1231746	journal	January 2016
An in situ SANS study of nanoparticles formation in 9Cr ODS steel powders He, Pei; Gao, Penglin; Tian, Qiang Materials Letters, Vol. 209 https://doi.org/10.1016/j.matlet.2017.08.051	journal	December 2017
Dynamic recrystallisation and the development of microstructure during the high temperature deformation of magnesium Ion, S. E.; Humphreys, F. J.; White, S. H. Acta Metallurgica, Vol. 30, Issue 10 https://doi.org/10.1016/0001-6160(82)90031-1	journal	October 1982
Microstructure and mechanical properties of FeCoNiCr high-entropy alloy strengthened by nano-Y2O3 dispersion Jia, Bei; Liu, XiongJun; Wang, Hui Science China Technological Sciences, Vol. 61, Issue 2 https://doi.org/10.1007/s11431-017-9115-5	journal	September 2017
Irradiation behavior evaluation of oxide dispersion strengthened ferritic steel cladding tubes irradiated in JOYO Yamashita, Shinichiro; Yano, Yasuhide; Ohtsuka, Satoshi Journal of Nuclear Materials, Vol. 442, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2013.04.051	journal	November 2013
Microstructure, tensile and creep properties of an austenitic ODS 316L steel Leo, J. R. O.; Pirfo Barroso, S.; Fitzpatrick, M. E. Materials Science and Engineering: A, Vol. 749 https://doi.org/10.1016/j.msea.2019.02.014	journal	March 2019
A note on grain size dependent pinning Brechet, Y.; Militzer, M. Scripta Materialia, Vol. 52, Issue 12 https://doi.org/10.1016/j.scriptamat.2005.02.021	journal	June 2005
A precipitation-hardened high-entropy alloy with outstanding tensile properties He, J. Y.; Wang, H.; Huang, H. L. Acta Materialia, Vol. 102 https://doi.org/10.1016/j.actamat.2015.08.076	journal	January 2016
Influence of microstructural parameters on the mechanical properties of oxide dispersion strengthened Fe-14Cr steels Dadé, M.; Malaplate, J.; Garnier, J. Acta Materialia, Vol. 127 https://doi.org/10.1016/j.actamat.2017.01.026	journal	April 2017
Irradiation Resistance in Al x CoCrFeNi High Entropy Alloys Xia, S. Q.; Yang, X.; Yang, T. F. JOM, Vol. 67, Issue 10 https://doi.org/10.1007/s11837-015-1568-4	journal	August 2015
Enhanced strength and high temperature resistance of 25Cr20Ni ODS austenitic alloy through thermo-mechanical treatment and addition of Mo Zhou, Zhangjian; Sun, Shengying; Zou, Lei Fusion Engineering and Design, Vol. 138 https://doi.org/10.1016/j.fusengdes.2018.11.020	journal	January 2019
The effect of injected interstitials on void formation in self-ion irradiated nickel containing concentrated solid solution alloys Yang, Tai-ni; Lu, Chenyang; Jin, Ke Journal of Nuclear Materials, Vol. 488 https://doi.org/10.1016/j.jnucmat.2017.02.026	journal	May 2017
Annealing behavior of ferritic–martensitic 9%Cr–ODS–Eurofer steel Sandim, H. R. Z.; Renzetti, R. A.; Padilha, A. F. Materials Science and Engineering: A, Vol. 527, Issue 15 https://doi.org/10.1016/j.msea.2010.02.051	journal	June 2010
Hall–Petch relation and boundary strengthening Hansen, Niels Scripta Materialia, Vol. 51, Issue 8 https://doi.org/10.1016/j.scriptamat.2004.06.002	journal	October 2004
Evaluation of mechanical properties and biological response of an alumina-forming Ni-free ferritic alloy González-Carrasco, J. L.; Ciapetti, G.; Montealegre, M. A. Biomaterials, Vol. 26, Issue 18 https://doi.org/10.1016/j.biomaterials.2004.09.058	journal	June 2005
Mechanical properties of irradiated ODS-EUROFER and nanocluster strengthened 14YWT McClintock, D. A.; Sokolov, M. A.; Hoelzer, D. T. Journal of Nuclear Materials, Vol. 392, Issue 2 https://doi.org/10.1016/j.jnucmat.2009.03.024	journal	July 2009
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions Sakai, Taku; Belyakov, Andrey; Kaibyshev, Rustam Progress in Materials Science, Vol. 60 https://doi.org/10.1016/j.pmatsci.2013.09.002	journal	March 2014
Effect of SiC nano-particles on microstructure and mechanical properties of the CoCrFeMnNi high entropy alloy Rogal, Łukasz; Kalita, Damian; Tarasek, Anna Journal of Alloys and Compounds, Vol. 708 https://doi.org/10.1016/j.jallcom.2017.02.274	journal	June 2017
Effect of annealing on the microstructure and texture of cold rolled CrCoNi medium-entropy alloy Dan Sathiaraj, G.; Skrotzki, Werner; Pukenas, Aurimas Intermetallics, Vol. 101 https://doi.org/10.1016/j.intermet.2018.07.014	journal	October 2018
Shock-induced phase transition of M2O3 (M = Sc, Y, Sm, Gd, and In)-type compounds Atou, T.; Kusaba, K.; Fukuoka, K. Journal of Solid State Chemistry, Vol. 89, Issue 2 https://doi.org/10.1016/0022-4596(90)90280-B	journal	December 1990
Microstructures and corrosion behaviors of FeCoNi and CrFeCoNi equimolar alloys Tsau, Chun-Huei; Lin, Si-Xuan; Fang, Chien-Hao Materials Chemistry and Physics, Vol. 186 https://doi.org/10.1016/j.matchemphys.2016.11.033	journal	January 2017
Tensile properties of Co-based oxide dispersion strengthened superalloys Yu, Hao; Ukai, Shigeharu; Oono, Naoko Journal of Alloys and Compounds, Vol. 714 https://doi.org/10.1016/j.jallcom.2017.04.276	journal	August 2017
High-entropy alloy strengthened by in situ formation of entropy-stabilized nano-dispersoids Gwalani, Bharat; Pohan, Rizaldy M.; Lee, Junho Scientific Reports, Vol. 8, Issue 1 https://doi.org/10.1038/s41598-018-32552-6	journal	September 2018
Oxide dispersion strengthened CoCrFeNiMn high-entropy alloy Hadraba, Hynek; Chlup, Zdenek; Dlouhy, Antonin Materials Science and Engineering: A, Vol. 689 https://doi.org/10.1016/j.msea.2017.02.068	journal	March 2017
Theory of strengthening in fcc high entropy alloys Varvenne, Céline; Luque, Aitor; Curtin, William A. Acta Materialia, Vol. 118 https://doi.org/10.1016/j.actamat.2016.07.040	journal	October 2016
Irradiation effects in oxide dispersion strengthened (ODS) Ni-base alloys for Gen. IV nuclear reactors Oono, Naoko; Ukai, Shigeharu; Kondo, Sosuke Journal of Nuclear Materials, Vol. 465 https://doi.org/10.1016/j.jnucmat.2015.06.057	journal	October 2015
Production, microstructure and mechanical properties of two different austenitic ODS steels Gräning, T.; Rieth, M.; Hoffmann, J. Journal of Nuclear Materials, Vol. 487 https://doi.org/10.1016/j.jnucmat.2017.02.034	journal	April 2017
A critical review of high entropy alloys and related concepts Miracle, D. B.; Senkov, O. N. Acta Materialia, Vol. 122 https://doi.org/10.1016/j.actamat.2016.08.081	journal	January 2017
Oxide particle refinement in Ni-based ODS alloy Oono, Naoko; Tang, Q. X.; Ukai, Shigeharu Materials Science and Engineering: A, Vol. 649 https://doi.org/10.1016/j.msea.2015.09.094	journal	January 2016
Composition dependence of structure, physical and mechanical properties of FeCoNi(MnAl) x high entropy alloys Li, Panpan; Wang, Anding; Liu, C. T. Intermetallics, Vol. 87 https://doi.org/10.1016/j.intermet.2017.04.007	journal	August 2017
Microstructure and mechanical properties of mechanically alloyed ODS copper alloy for fusion material application Aghamiri, S. M. S.; Oono, N.; Ukai, S. Nuclear Materials and Energy, Vol. 15 https://doi.org/10.1016/j.nme.2018.05.019	journal	May 2018
Evolution of ultrafine grained microstructure and nano-sized semi-coherent oxide particles in austenitic oxide dispersion strengthened steel Mao, Xiaodong; Oh, Kyu Hwan; Jang, Jinsung Materials Characterization, Vol. 117 https://doi.org/10.1016/j.matchar.2016.04.022	journal	July 2016
A novel approach for strengthening Cu–Y2O3 composites by in situ reaction at liquidus temperature Zhuo, Haiou; Tang, Jiancheng; Ye, Nan Materials Science and Engineering: A, Vol. 584 https://doi.org/10.1016/j.msea.2013.07.007	journal	November 2013
High-entropy alloy: challenges and prospects Ye, Y. F.; Wang, Q.; Lu, J. Materials Today, Vol. 19, Issue 6 https://doi.org/10.1016/j.mattod.2015.11.026	journal	July 2016
Microstructure, Mechanical and Tribological Properties of Oxide Dispersion Strengthened High-Entropy Alloys Liu, Xinyu; Yin, Hangboce; Xu, Yi Materials, Vol. 10, Issue 11 https://doi.org/10.3390/ma10111312	journal	November 2017
Composition design of high entropy alloys using the valence electron concentration to balance strength and ductility Chen, Ruirun; Qin, Gang; Zheng, Huiting Acta Materialia, Vol. 144 https://doi.org/10.1016/j.actamat.2017.10.058	journal	February 2018
Microstructure–mechanical property correlation in oxide dispersion strengthened 18Cr ferritic steel Nagini, M.; Vijay, R.; Rajulapati, Koteswararao V. Materials Science and Engineering: A, Vol. 708 https://doi.org/10.1016/j.msea.2017.10.023	journal	December 2017
Influence of chemical disorder on energy dissipation and defect evolution in concentrated solid solution alloys Zhang, Yanwen; Stocks, G. Malcolm; Jin, Ke Nature Communications, Vol. 6, Issue 1 https://doi.org/10.1038/ncomms9736	journal	October 2015
High-temperature mechanical properties and microstructure of 9Cr oxide dispersion strengthened steel compared with RAFMs Li, Yanfen; Nagasaka, Takuya; Muroga, Takeo Fusion Engineering and Design, Vol. 86, Issue 9-11 https://doi.org/10.1016/j.fusengdes.2011.03.004	journal	October 2011
Dissipation of radiation energy in concentrated solid-solution alloys: Unique defect properties and microstructural evolution Zhang, Yanwen; Egami, Takeshi; Weber, William J. MRS Bulletin, Vol. 44, Issue 10 https://doi.org/10.1557/mrs.2019.233	journal	October 2019
Effects of milling process and alloying additions on oxide particle dispersion in austenitic stainless steel Oka, Hiroshi; Watanabe, Masashi; Ohnuki, Somei Journal of Nuclear Materials, Vol. 447, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2014.01.025	journal	April 2014
Microstructural characterization and strengthening mechanisms of a 12Cr-ODS steel Shen, Jingjie; Li, Yanfen; Li, Feng Materials Science and Engineering: A, Vol. 673 https://doi.org/10.1016/j.msea.2016.07.030	journal	September 2016
Morphology of oxide particles in ODS austenitic stainless steel Oka, Hiroshi; Watanabe, Masashi; Hashimoto, Naoyuki Journal of Nuclear Materials, Vol. 442, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2013.04.073	journal	November 2013
Deformation twins and interface characteristics of nano-Al2O3 reinforced Al0.4FeCrCo1.5NiTi0.3 high entropy alloy composites Yang, Shaofeng; Zhang, Yan; Yan, Xing Materials Chemistry and Physics, Vol. 210 https://doi.org/10.1016/j.matchemphys.2017.11.037	journal	May 2018
Effect of alloying elements on defect evolution in Ni-20X binary alloys Yang, Tai-ni; Lu, Chenyang; Velisa, Gihan Acta Materialia, Vol. 151 https://doi.org/10.1016/j.actamat.2018.03.054	journal	June 2018
Melting behavior of levitated Y2O3 Hennet, L.; Thiaudière, D.; Landron, C. Applied Physics Letters, Vol. 83, Issue 16 https://doi.org/10.1063/1.1621090	journal	October 2003
Atomic-level heterogeneity and defect dynamics in concentrated solid-solution alloys Zhang, Yanwen; Zhao, Shijun; Weber, William J. Current Opinion in Solid State and Materials Science, Vol. 21, Issue 5 https://doi.org/10.1016/j.cossms.2017.02.002	journal	October 2017

Similar Records

Oxide dispersion strengthened FeCoNi concentrated solid-solution alloys synthesized by mechanical alloying

Journal Article · Mon Dec 09 00:00:00 EST 2019 · Intermetallics · OSTI ID:1761646

Guo, Yuanhang; Li, Mingyang; Chen, Cunguang; +5 more

Establishing a Scientific Basis for Optimizing Compositions, Process Paths and Fabrication Methods for Nanostructured Ferritic Alloys for Use in Advanced Fission Energy Systems

Technical Report · Tue Feb 21 00:00:00 EST 2012 · OSTI ID:1761646

Odette, G Robert; Etienne, Auriane; Stergar, Erich; +1 more

The role of processing route on the microstructure of 14YWT nanostructured ferritic alloy

Journal Article · Wed Jun 03 00:00:00 EDT 2015 · Journal of Nuclear Materials · OSTI ID:1761646

Mazumder, B.; Parish, C. M.; Bei, H.; +1 more

Related Subjects

36 MATERIALS SCIENCE
metal matrix composites
mechanical alloying
microstructure
phase transitions
mechanical properties

Title: Microstructure and mechanical properties of oxide dispersion strengthened FeCoNi concentrated solid solution alloys

Citation Formats

References (67)

Similar Records

Related Subjects