skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Chemical Compatibility of Barium-Calcium-Aluminosilicate Based Sealing Glasses with Heat Resistant Alloys

Conference ·
OSTI ID:15011120

In most planar SOFC stacks operating at an intermediate temperature (700-800 degrees C), the interconnect is typically made from a ferritic stainless steel and has to be hermitically sealed to its adjacent components, such as the ceramic PEN (Positive electrode-Electrolyte-Negative electrode) by a sealing glass. To large extent the seal performance relies on the chemical compatibility of the sealing glass with the metallic interconnect. In this study, a barium-calcium-aluminosilicate (BCAS) based glass-ceramic, specifically developed as a sealant in SOFC stacks, and a ferritic stainless steel (446) were chosen as examples to investigate the chemical interactions or corrosions at the sealing glass interface with the ferritic stainless steels. Evaluation of the interfaces of coupon joints indicated that interactions between the BCAS glass-ceramic and the ferritic stainless steel depended on the exposure conditions. At the edges of joints, where oxygen or air was accessible, the interaction often led to the formation of BaCrO4, while in the interior of the joints, chromium or chromia dissolved into the glass to form a thin layer of chromium rich solid solution. It was also found that, in the interior of the joints, the interaction often resulted in the formation of pores aligning along the interface. The pore formation along the interface of sealing glass and ferritic stainless steel however could be avoided through a pre-heat treatment of the ferriitc stainless steel.

Research Organization:
Pacific Northwest National Lab. (PNNL), Richland, WA (United States)
Sponsoring Organization:
USDOE
DOE Contract Number:
AC05-76RL01830
OSTI ID:
15011120
Report Number(s):
PNNL-SA-37464; AA2530000; TRN: US200503%%681
Resource Relation:
Conference: Materials Solutions 2002; Columbus, OH; USA; 7-9 Oct. 2002. International Conference on Joining of Advanced and Specialty Materials, 116-122
Country of Publication:
United States
Language:
English