Nucleate pool boiling of R-245fa at low saturation temperatures for hydrogen precooling applications

Moreno, Gilberto; Kekelia, Bidzina; Sitaraman, Hariswaran; Narumanchi, Sreekant; Bennion, Kevin

doi:10.1016/j.ijheatmasstransfer.2018.11.123

Title: Nucleate pool boiling of R-245fa at low saturation temperatures for hydrogen precooling applications

Journal Article · Fri Dec 07 00:00:00 EST 2018 · International Journal of Heat and Mass Transfer

DOI:https://doi.org/10.1016/j.ijheatmasstransfer.2018.11.123· OSTI ID:1489325

Moreno, Gilberto ^[1]; Kekelia, Bidzina ^[1]; Sitaraman, Hariswaran ^[1]; Narumanchi, Sreekant ^[1]; Bennion, Kevin ^[1]

National Renewable Energy Lab. (NREL), Golden, CO (United States)

In this study, experiments were conducted to measure the pool boiling performance of saturated R-245fa at low saturation temperatures (-30 degrees C, -40 degrees C, and -50 degrees C). Horizontally oriented cylindrical heat sources were used as the test samples and were intended to simulate a small section of a hydrogen-filled tube. Measurements evaluated the effects of saturation temperature and two microporous coatings on heat transfer coefficients (HTC), critical heat flux (CHF), and boiling incipient superheat. Results show that boiling performance decreases as the saturation temperature reduces - a result of less active nucleation sites and higher vapor coverage of the heated surface at lower temperatures. Microporous coatings increased HTCs and CHF values, but did not have a significant effect on reducing the boiling incipient superheat. Finally, the experimental results were used to develop correlations for nucleate pool boiling on plain and microporous surfaces that can be used to predict HTCs and CHF values at low saturation temperature conditions (down to -50 degrees C).

View Accepted Manuscript (DOE)

View Accepted Manuscript (Publisher)

Cite

Export

Save

Research Organization:: National Renewable Energy Laboratory (NREL), Golden, CO (United States)

Sponsoring Organization:: USDOE; Laboratory Directed Research and Development (LDRD) Program

Grant/Contract Number:: AC36-08GO28308

OSTI ID:: 1489325

Alternate ID(s):: OSTI ID: 1775812

Report Number(s):: NREL/JA-5400-72625

Journal Information:: International Journal of Heat and Mass Transfer, Vol. 132, Issue C; ISSN 0017-9310

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

Citation Metrics:

Cited by: 6 works

Citation information provided by
Web of Science

References (27)

Effect of pressure, subcooling, and dissolved gas on pool boiling heat transfer from microporous, square pin-finned surfaces in FC-72 Rainey, K. N.; You, S. M.; Lee, S. International Journal of Heat and Mass Transfer, Vol. 46, Issue 1 https://doi.org/10.1016/S0017-9310(02)00257-0	journal	January 2003
Pool Boiling Heat Transfer Characteristics of HFO-1234yf on Plain and Microporous-Enhanced Surfaces Moreno, Gilberto; Narumanchi, Sreekant; King, Charles Journal of Heat Transfer, Vol. 135, Issue 11 https://doi.org/10.1115/1.4024622	journal	September 2013
Effects of Pressure and a Microporous Coating on HFC-245fa Pool Boiling Heat Transfer Moreno, Gilberto; Jeffers, Jana R.; Narumanchi, Sreekant Journal of Heat Transfer, Vol. 136, Issue 10 https://doi.org/10.1115/1.4027966	journal	July 2014
Fluid flow and heat transfer characteristics of low temperature two-phase micro-channel heat sinks – Part 1: Experimental methods and flow visualization results Lee, Jaeseon; Mudawar, Issam International Journal of Heat and Mass Transfer, Vol. 51, Issue 17-18 https://doi.org/10.1016/j.ijheatmasstransfer.2008.02.012	journal	August 2008
Fluid flow and heat transfer characteristics of low temperature two-phase micro-channel heat sinks – Part 2. Subcooled boiling pressure drop and heat transfer Lee, Jaeseon; Mudawar, Issam International Journal of Heat and Mass Transfer, Vol. 51, Issue 17-18 https://doi.org/10.1016/j.ijheatmasstransfer.2008.02.013	journal	August 2008
Local heat transfer coefficients and pressure gradients for R-134a during flow boiling at temperatures between −9°C and +20°C de Rossi, F.; Mauro, A. W.; Rosato, A. Energy Conversion and Management, Vol. 50, Issue 7 https://doi.org/10.1016/j.enconman.2009.03.022	journal	July 2009
Boiling of new refrigerants: a state-of-the-art review Thome, John R. International Journal of Refrigeration, Vol. 19, Issue 7 https://doi.org/10.1016/S0140-7007(96)00004-7	journal	September 1996
Experimental study of nucleate boiling of halocarbon refrigerants on cylindrical surfaces Ribatski, Gherhardt; Jabardo, José M. Saiz International Journal of Heat and Mass Transfer, Vol. 46, Issue 23 https://doi.org/10.1016/S0017-9310(03)00252-7	journal	November 2003
Nucleate pool boiling data for five refrigerants on plain, integral-fin and enhanced tube geometries Webb, Ralph L.; Pais, Christopher International Journal of Heat and Mass Transfer, Vol. 35, Issue 8 https://doi.org/10.1016/0017-9310(92)90192-U	journal	August 1992
Comparative assessment of condensation and pool boiling heat transfer on horizontal plain single tubes for R1234ze(E), R1234ze(Z), and R1233zd(E) Nagata, Ryuichi; Kondou, Chieko; Koyama, Shigeru International Journal of Refrigeration, Vol. 63 https://doi.org/10.1016/j.ijrefrig.2015.11.002	journal	March 2016
Pool boiling data and prediction method for enhanced boiling tubes with R-134a, R-236fa and R-1234ze(E) van Rooyen, E.; Thome, J. R. International Journal of Refrigeration, Vol. 36, Issue 2 https://doi.org/10.1016/j.ijrefrig.2012.11.023	journal	March 2013
Nucleate boiling of low GWP refrigerants on highly enhanced tube surface Gorgy, Evraam International Journal of Heat and Mass Transfer, Vol. 96 https://doi.org/10.1016/j.ijheatmasstransfer.2016.01.057	journal	May 2016
Nucleate boiling of pure and quasi-azeotropic refrigerants from copper coated surfaces Dewangan, Ashok K.; Kumar, Anil; Kumar, Ravi Applied Thermal Engineering, Vol. 94 https://doi.org/10.1016/j.applthermaleng.2015.10.138	journal	February 2016
Nucleate pool boiling from coated surfaces in saturated R-134a and R-407c Hsieh, Shou-Shing; Weng, Chun-Jen International Journal of Heat and Mass Transfer, Vol. 40, Issue 3 https://doi.org/10.1016/0017-9310(96)00166-4	journal	February 1997
Pool boiling heat transfer of R134a on single horizontal tube surfaces sintered with open-celled copper foam Ji, Wen-Tao; Qu, Zhi-Guo; Li, Zeng-Yao International Journal of Thermal Sciences, Vol. 50, Issue 11 https://doi.org/10.1016/j.ijthermalsci.2011.05.018	journal	November 2011
Boiling from small cylinders Bakhru, Nanik; Lienhard, John H. International Journal of Heat and Mass Transfer, Vol. 15, Issue 11 https://doi.org/10.1016/0017-9310(72)90028-2	journal	November 1972
Heater Size and Gravity Based Pool Boiling Regime Map: Transition Criteria Between Buoyancy and Surface Tension Dominated Boiling Raj, Rishi; Kim, Jungho Journal of Heat Transfer, Vol. 132, Issue 9 https://doi.org/10.1115/1.4001635	journal	July 2010
Nucleate boiling heat transfer coefficients of flammable refrigerants Jung, Dongsoo; Lee, Heungseok; Bae, Dongsoo International Journal of Refrigeration, Vol. 27, Issue 4 https://doi.org/10.1016/j.ijrefrig.2003.11.007	journal	June 2004
Prediction methods for pool boiling heat transfer: A state-of-the-art review Gorenflo, Dieter; Baumhögger, Elmar; Herres, Gerhard International Journal of Refrigeration, Vol. 43 https://doi.org/10.1016/j.ijrefrig.2013.12.012	journal	July 2014
The Influence of Surface Roughness on Nucleate Pool Boiling Heat Transfer Jones, Benjamin J.; McHale, John P.; Garimella, Suresh V. Journal of Heat Transfer, Vol. 131, Issue 12 https://doi.org/10.1115/1.3220144	journal	October 2009
Hydrodynamic Prediction of Peak Pool-boiling Heat Fluxes from Finite Bodies Lienhard, J. H.; Dhir, V. K. Journal of Heat Transfer, Vol. 95, Issue 2 https://doi.org/10.1115/1.3450013	journal	May 1973
The peak pool boiling heat flux on horizontal cylinders Sun, Kauo-Hwa; Lienhard, John H. International Journal of Heat and Mass Transfer, Vol. 13, Issue 9 https://doi.org/10.1016/0017-9310(70)90178-X	journal	September 1970
Hydrodynamic Aspects Of Boiling Heat Transfer (Thesis) Zuber, Novak https://doi.org/10.2172/4175511	report	June 1959
Parametric Study of Pool Boiling on Horizontal Highly Conductive Microporous Coated Surfaces Li, Chen; Peterson, G. P. Journal of Heat Transfer, Vol. 129, Issue 11 https://doi.org/10.1115/1.2759969	journal	April 2007
Pool boiling characteristics and critical heat flux mechanisms of microporous surfaces and enhancement through structural modification Ha, Minseok; Graham, Samuel Applied Physics Letters, Vol. 111, Issue 9 https://doi.org/10.1063/1.4999158	journal	August 2017
Experimental investigation of nucleate boiling incipience with a highly-wetting dielectric fluid (R-113) You, S. M.; Simon, T. W.; Bar-Cohen, A. International Journal of Heat and Mass Transfer, Vol. 33, Issue 1 https://doi.org/10.1016/0017-9310(90)90145-K	journal	January 1990
Boiling incipience and nucleate boiling heat transfer of highly wetting dielectric fluids from electronic materials You, S. M.; Bar-Cohen, A.; Simon, T. W. IEEE Transactions on Components, Hybrids, and Manufacturing Technology, Vol. 13, Issue 4 https://doi.org/10.1109/33.62545	journal	January 1990

Cited By (1)

Test 1 EDITED Agresta, Ronald Office of Scientific and Technical Information, Oak Ridge, TN; 123123123 (TestAuthority); Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States) https://doi.org/10.11578/1721336	dataset	January 2016

Similar Records

The effect of heater material and thickness on the saturated pool nucleate boiling curve

Conference · Mon Nov 01 00:00:00 EST 1993 · OSTI ID:1489325

Pasamehmetoglu, K. O.; Unal, C.

Numerical modeling of the effect of surface topology on the saturated pool nucleate boiling curve

Conference · Thu Apr 01 00:00:00 EST 1993 · OSTI ID:1489325

Unal, C; Pasamehmetoglu, K O

Boiling behavior of sodium-potassium alloy in a bench-scale solar receiver

Conference · Wed Jan 01 00:00:00 EST 1992 · OSTI ID:1489325

Moreno, J B; Andraka, C E; Moss, T A

Related Subjects

08 HYDROGEN
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CHEMISTRY
CHF
hydrogen heat exchangers
low-temperature boiling
nucleate pool boiling

Title: Nucleate pool boiling of R-245fa at low saturation temperatures for hydrogen precooling applications

Citation Formats

References (27)

Cited By (1)

Similar Records

Related Subjects