A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718

Ghorbanpour, Saeede; Zecevic, Milovan; Kumar, Anil; Jahedi, Mohammad; Bicknell, Jonathan; Jorgensen, Luke; Beyerlein, Irene J.; Knezevic, Marko

doi:10.1016/j.ijplas.2017.09.006

Title: A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718

Journal Article · Thu Sep 14 00:00:00 EDT 2017 · International Journal of Plasticity

DOI:https://doi.org/10.1016/j.ijplas.2017.09.006· OSTI ID:1396145

Ghorbanpour, Saeede ^[1]; Zecevic, Milovan ^[1]; Kumar, Anil ^[2]; Jahedi, Mohammad ^[1]; Bicknell, Jonathan ^[3]; Jorgensen, Luke ^[3]; Beyerlein, Irene J. ^[4]; Knezevic, Marko ^[1]

Univ. of New Hampshire, Durham, NH (United States). Dept. of Mechanical Engineering
Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
Turbocam Energy Solutions, Dover, NH (United States)
Univ. of California, Santa Barbara, CA (United States). Mechanical Engineering Dept., Materials Dept.

An elasto-plastic polycrystal plasticity model is developed and applied to an Inconel 718 (IN718) superalloy that was produced by additive manufacturing (AM). The model takes into account the contributions of solid solution, precipitates shearing, and grain size and shape effects into the initial slip resistance. Non-Schmid effects and backstress are also included in the crystal plasticity model for activating slip. The hardening law for the critical resolved shear stress is based on the evolution of dislocation density. In using the same set of material and physical parameters, the model is compared against a suite of compression, tension, and large-strain cyclic mechanical test data applied in different AM build directions. We demonstrate that the model is capable of predicting the particularities of both monotonic and cyclic deformation to large strains of the alloy, including decreasing hardening rate during monotonic loading, the non-linear unloading upon the load reversal, the Bauschinger effect, the hardening rate change during loading in the reverse direction as well as plastic anisotropy and the concomitant microstructure evolution. It is anticipated that the general model developed here can be applied to other multiphase alloys containing precipitates.

View Accepted Manuscript (DOE)

Cite

Export

Save

Research Organization:: Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)

Sponsoring Organization:: USDOE; National Science Foundation (NSF)

Grant/Contract Number:: AC52-06NA25396; CMMI-1728224

OSTI ID:: 1396145

Report Number(s):: LA-UR-17-28453

Journal Information:: International Journal of Plasticity, Vol. 99; ISSN 0749-6419

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

Citation Metrics:

Cited by: 122 works

Citation information provided by
Web of Science

References (98)

Plastic anisotropy of electro-deposited pure α-iron with sharp crystallographic <111>// texture in normal direction: Analysis by an explicitly dislocation-based crystal plasticity model Alankar, Alankar; Field, David P.; Raabe, Dierk International Journal of Plasticity, Vol. 52 https://doi.org/10.1016/j.ijplas.2013.03.006	journal	January 2014
A dislocation density based crystal plasticity finite element model: Application to a two-phase polycrystalline HCP/BCC composites Ardeljan, Milan; Beyerlein, Irene J.; Knezevic, Marko Journal of the Mechanics and Physics of Solids, Vol. 66 https://doi.org/10.1016/j.jmps.2014.01.006	journal	May 2014
Strain rate and temperature sensitive multi-level crystal plasticity model for large plastic deformation behavior: Application to AZ31 magnesium alloy Ardeljan, Milan; Beyerlein, Irene J.; McWilliams, Brandon A. International Journal of Plasticity, Vol. 83 https://doi.org/10.1016/j.ijplas.2016.04.005	journal	August 2016
A study of microstructure-driven strain localizations in two-phase polycrystalline HCP/BCC composites using a multi-scale model Ardeljan, Milan; Knezevic, Marko; Nizolek, Thomas International Journal of Plasticity, Vol. 74 https://doi.org/10.1016/j.ijplas.2015.06.003	journal	November 2015
Antiphase boundary energies and the transition from shearing to looping in alloys strengthened by ordered precipitates Ardell, A. J.; Huang, J. C. Philosophical Magazine Letters, Vol. 58, Issue 4 https://doi.org/10.1080/09500838808214752	journal	October 1988
Effect of the applied stress and the friction stress on the dislocation dissociation in face centered cubic metals Baudouin, Jean-Baptiste; Monnet, Ghiath; Perez, Michel Materials Letters, Vol. 97 https://doi.org/10.1016/j.matlet.2012.10.117	journal	April 2013
Dependence of the antiphase boundary energy upon orientation in the L1 ₂ structure Beauchamp, P.; Douin, J.; Veyssière, P. Philosophical Magazine A, Vol. 55, Issue 5 https://doi.org/10.1080/01418618708214369	journal	May 1987
Modeling transients in the mechanical response of copper due to strain path changes Beyerlein, Irene J.; Tomé, Carlos N. International Journal of Plasticity, Vol. 23, Issue 4 https://doi.org/10.1016/j.ijplas.2006.08.001	journal	April 2007
A dislocation-based constitutive law for pure Zr including temperature effects Beyerlein, I. J.; Tomé, C. N. International Journal of Plasticity, Vol. 24, Issue 5 https://doi.org/10.1016/j.ijplas.2007.07.017	journal	May 2008
Projector augmented-wave method Blöchl, P. E. Physical Review B, Vol. 50, Issue 24, p. 17953-17979 https://doi.org/10.1103/PhysRevB.50.17953	journal	December 1994
Non-Schmid effects and localized plastic flow in intermetallic alloys Dao, M.; Asaro, R. J. Materials Science and Engineering: A, Vol. 170, Issue 1-2 https://doi.org/10.1016/0921-5093(93)90376-P	journal	October 1993
TEM Study of High-Temperature Precipitation of Delta Phase in Inconel 718 Alloy Dehmas, Moukrane; Lacaze, Jacques; Niang, Aliou Advances in Materials Science and Engineering, Vol. 2011 https://doi.org/10.1155/2011/940634	journal	January 2011
Gamma double prime precipitation kinetic in Alloy 718 Devaux, A.; Nazé, L.; Molins, R. Materials Science and Engineering: A, Vol. 486, Issue 1-2 https://doi.org/10.1016/j.msea.2007.08.046	journal	July 2008
Physical analyses of crystal plasticity by DD simulations Devincre, B.; Kubin, L.; Hoc, T. Scripta Materialia, Vol. 54, Issue 5 https://doi.org/10.1016/j.scriptamat.2005.10.066	journal	March 2006
Dislocation line stability in Ni ₃ AI Douin, J.; Veyssière, P.; Beauchamp, P. Philosophical Magazine A, Vol. 54, Issue 3 https://doi.org/10.1080/01418618608240722	journal	September 1986
The determination of the elastic field of an ellipsoidal inclusion, and related problems Eshelby, John Douglas Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, Vol. 241, Issue 1226, p. 376-396 https://doi.org/10.1098/rspa.1957.0133	journal	August 1957
Hardening anisotropy of γγ′ superalloy single crystals—II. Numberical analysis of heterogeneity effects Estevez, R.; Hoinard, G.; Franciosi, P. Acta Materialia, Vol. 45, Issue 4 https://doi.org/10.1016/S1359-6454(96)00265-0	journal	April 1997
The structure and paramagnetism of Ni ₃ Nb Fang, T.; Kennedy, S. J.; Quan, L. Journal of Physics: Condensed Matter, Vol. 4, Issue 10 https://doi.org/10.1088/0953-8984/4/10/007	journal	March 1992
Application of the embedded atom method to Ni ₃ Al Foiles, S. M.; Daw, M. S. Journal of Materials Research, Vol. 2, Issue 1 https://doi.org/10.1557/JMR.1987.0005	journal	February 1987
Multislip in f.c.c. crystals a theoretical approach compared with experimental data Franciosi, P.; Zaoui, A. Acta Metallurgica, Vol. 30, Issue 8 https://doi.org/10.1016/0001-6160(82)90184-5	journal	August 1982
High-temperature deformation mechanisms in a polycrystalline nickel-base superalloy studied by neutron diffraction and electron microscopy Francis, E. M.; Grant, B. M. B.; Fonseca, J. Quinta da Acta Materialia, Vol. 74 https://doi.org/10.1016/j.actamat.2014.04.028	journal	August 2014
Elastic moduli and internal frictions of Inconel 718 and Ti-6Al-4V as a function of temperature Fukuhara, M.; Sanpei, A. Journal of Materials Science Letters, Vol. 12, Issue 14 https://doi.org/10.1007/BF00420541	journal	January 1993
Study of standard heat treatment on mechanical properties of Inconel 718 using ball indentation technique Ghosh, Sabita; Yadav, Sandip; Das, Goutam Materials Letters, Vol. 62, Issue 17-18 https://doi.org/10.1016/j.matlet.2008.01.001	journal	June 2008
Strengthening contributions of strong ordered precipitates Glazer, J.; Morris, J. W. Philosophical Magazine A, Vol. 56, Issue 4 https://doi.org/10.1080/01418618708214402	journal	October 1987
Precipitation hardening by coherent particles Gleiter, H.; Hornbogen, E. Materials Science and Engineering, Vol. 2, Issue 6 https://doi.org/10.1016/0025-5416(68)90047-5	journal	March 1968
Low cycle fatigue behavior of direct metal laser sintered Inconel alloy 718 Gribbin, Sean; Bicknell, Jonathan; Jorgensen, Luke International Journal of Fatigue, Vol. 93 https://doi.org/10.1016/j.ijfatigue.2016.08.019	journal	December 2016
Multi-component solid solution hardening: Part 1 Proposed model Gypen, L. A.; Deruyttere, A. Journal of Materials Science, Vol. 12, Issue 5 https://doi.org/10.1007/BF00540987	journal	May 1977
The effects of grain size on the cyclic deformation behaviour of polycrystalline nickel Haddou, H.; Risbet, M.; Marichal, G. Materials Science and Engineering: A, Vol. 379, Issue 1-2 https://doi.org/10.1016/j.msea.2003.12.069	journal	August 2004
Limiting configuration in dislocation glide through a random array of point obstacles Hanson, Kenton; Morris, J. W. Journal of Applied Physics, Vol. 46, Issue 3 https://doi.org/10.1063/1.321718	journal	March 1975
Deformation behaviour and dislocation structures upon stress reversal in polycrystalline aluminium Hasegawa, T.; Yakou, T.; Karashima, S. Materials Science and Engineering, Vol. 20 https://doi.org/10.1016/0025-5416(75)90159-7	journal	January 1975
Order strengthening in the cast nickel-based superalloy IN 100 at room temperature Heilmaier, Martin; Leetz, Utje; Reppich, Bernd Materials Science and Engineering: A, Vol. 319-321 https://doi.org/10.1016/S0921-5093(01)00989-3	journal	December 2001
Progress in Additive Manufacturing Herderick, Edward D. JOM, Vol. 67, Issue 3 https://doi.org/10.1007/s11837-015-1323-x	journal	February 2015
Joining of Inconel 718 and 316 Stainless Steel using electron beam melting additive manufacturing technology Hinojos, Alejandro; Mireles, Jorge; Reichardt, Ashley Materials & Design, Vol. 94 https://doi.org/10.1016/j.matdes.2016.01.041	journal	March 2016
Kear-Wilsdorf locks and the formation of antiphase-boundary tubes in L1 2 alloys Hirsch, P. B. Philosophical Magazine, Vol. 83, Issue 8 https://doi.org/10.1080/0141861021000062684	journal	January 2003
Hardening anisotropy of γ/γ′ superalloy single crystals—I. Experimental estimates at 650°C from a homogeneous analysis Hoinard, G.; Estevez, R.; Franciosi, P. Acta Metallurgica et Materialia, Vol. 43, Issue 4 https://doi.org/10.1016/0956-7151(94)00352-I	journal	April 1995
Enhancement of orientation gradients during simple shear deformation by application of simple compression Jahedi, Mohammad; Ardeljan, Milan; Beyerlein, Irene J. Journal of Applied Physics, Vol. 117, Issue 21 https://doi.org/10.1063/1.4922032	journal	June 2015
Deformation twinning in rolled WE43-T5 rare earth magnesium alloy: Influence on strain hardening and texture evolution Jahedi, Mohammad; McWilliams, Brandon A.; Moy, Paul Acta Materialia, Vol. 131 https://doi.org/10.1016/j.actamat.2017.03.075	journal	June 2017
A crystal plasticity finite element model for flow stress anomalies in Ni ₃ Al single crystals Keshavarz, Shahriyar; Ghosh, Somnath Philosophical Magazine, Vol. 95, Issue 24 https://doi.org/10.1080/14786435.2015.1073858	journal	August 2015
A crystallographic dislocation model for describing hardening of polycrystals during strain path changes. Application to low carbon steels Kitayama, K.; Tomé, C. N.; Rauch, E. F. International Journal of Plasticity, Vol. 46 https://doi.org/10.1016/j.ijplas.2012.09.004	journal	July 2013
A strain-rate and temperature dependent constitutive model for BCC metals incorporating non-Schmid effects: Application to tantalum–tungsten alloys Knezevic, Marko; Beyerlein, Irene J.; Lovato, Manuel L. International Journal of Plasticity, Vol. 62 https://doi.org/10.1016/j.ijplas.2014.07.007	journal	November 2014
Characterization of microstructure in Nb rods processed by rolling: Effect of grooved rolling die geometry on texture uniformity Knezevic, Marko; Bhattacharyya, Abhishek International Journal of Refractory Metals and Hard Materials, Vol. 66 https://doi.org/10.1016/j.ijrmhm.2017.02.007	journal	August 2017
Anisotropic stress–strain response and microstructure evolution of textured α-uranium Knezevic, Marko; Capolungo, Laurent; Tomé, Carlos N. Acta Materialia, Vol. 60, Issue 2 https://doi.org/10.1016/j.actamat.2011.10.041	journal	January 2012
Material-based design of the extrusion of bimetallic tubes Knezevic, Marko; Jahedi, Mohammad; Korkolis, Yannis P. Computational Materials Science, Vol. 95 https://doi.org/10.1016/j.commatsci.2014.07.021	journal	December 2014
Procedures for reducing large datasets of crystal orientations using generalized spherical harmonics Knezevic, Marko; Landry, Nicholas W. Mechanics of Materials, Vol. 88 https://doi.org/10.1016/j.mechmat.2015.04.014	journal	September 2015
Deformation twinning in AZ31: Influence on strain hardening and texture evolution Knezevic, Marko; Levinson, Amanda; Harris, Ryan Acta Materialia, Vol. 58, Issue 19 https://doi.org/10.1016/j.actamat.2010.07.041	journal	November 2010
Strain rate and temperature effects on the selection of primary and secondary slip and twinning systems in HCP Zr Knezevic, Marko; Zecevic, Milovan; Beyerlein, Irene J. Acta Materialia, Vol. 88 https://doi.org/10.1016/j.actamat.2015.01.037	journal	April 2015
A numerical procedure enabling accurate descriptions of strain rate-sensitive flow of polycrystals within crystal visco-plasticity theory Knezevic, Marko; Zecevic, Miroslav; Beyerlein, Irene J. Computer Methods in Applied Mechanics and Engineering, Vol. 308 https://doi.org/10.1016/j.cma.2016.05.025	journal	August 2016
Kinetics of flow and strain-hardening Mecking, H.; Kocks, U. F. Acta Metallurgica, Vol. 29, Issue 11 https://doi.org/10.1016/0001-6160(81)90112-7	journal	November 1981
Strengthening Mechanisms in Polycrystalline Multimodal Nickel-Base Superalloys Kozar, R. W.; Suzuki, A.; Milligan, W. W. Metallurgical and Materials Transactions A, Vol. 40, Issue 7 https://doi.org/10.1007/s11661-009-9858-5	journal	May 2009
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set Kresse, G.; Furthmüller, J. Physical Review B, Vol. 54, Issue 16, p. 11169-11186 https://doi.org/10.1103/PhysRevB.54.11169	journal	October 1996
Ab initio molecular-dynamics simulation of the liquid-metal–amorphous-semiconductor transition in germanium Kresse, G.; Hafner, J. Physical Review B, Vol. 49, Issue 20, p. 14251-14269 https://doi.org/10.1103/PhysRevB.49.14251	journal	May 1994
From ultrasoft pseudopotentials to the projector augmented-wave method Kresse, G.; Joubert, D. Physical Review B, Vol. 59, Issue 3, p. 1758-1775 https://doi.org/10.1103/PhysRevB.59.1758	journal	January 1999
An atomic-scale modeling and experimental study of $〈 c + a 〉$ dislocations in Mg Kumar, Anil; Morrow, Benjamin M.; McCabe, Rodney J. Materials Science and Engineering: A, Vol. 695 https://doi.org/10.1016/j.msea.2017.04.027	journal	May 2017
Aging effects on the microstructure and creep behavior of Inconel 718 superalloy Kuo, C. -M.; Yang, Y. -T.; Bor, H. -Y. Materials Science and Engineering: A, Vol. 510-511 https://doi.org/10.1016/j.msea.2008.04.097	journal	June 2009
The orientation and temperature dependence of the yield stress of Ni3 (Al, Nb) single crystals Lall, C.; Chin, S.; Pope, D. P. Metallurgical Transactions A, Vol. 10, Issue 9 https://doi.org/10.1007/BF02811988	journal	September 1979
A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys Lebensohn, R. A.; Tomé, C. N. Acta Metallurgica et Materialia, Vol. 41, Issue 9 https://doi.org/10.1016/0956-7151(93)90130-K	journal	September 1993
In situ X-ray diffraction and crystal plasticity modeling of the deformation behavior of extruded Mg–Li–(Al) alloys: An uncommon tension–compression asymmetry Lentz, Martin; Klaus, Manuela; Beyerlein, Irene J. Acta Materialia, Vol. 86 https://doi.org/10.1016/j.actamat.2014.12.003	journal	March 2015
Effect of age hardening on the deformation behavior of an Mg–Y–Nd alloy: In-situ X-ray diffraction and crystal plasticity modeling Lentz, Martin; Klaus, Manuela; Wagner, Michael Materials Science and Engineering: A, Vol. 628 https://doi.org/10.1016/j.msea.2015.01.069	journal	March 2015
Application of generalized non-Schmid yield law to low-temperature plasticity in bcc transition metals Lim, H.; Weinberger, C. R.; Battaile, C. C. Modelling and Simulation in Materials Science and Engineering, Vol. 21, Issue 4 https://doi.org/10.1088/0965-0393/21/4/045015	journal	May 2013
Elastoplasticity of micro-inhomogeneous metals at large strains Lipinski, P.; Berveiller, M. International Journal of Plasticity, Vol. 5, Issue 2 https://doi.org/10.1016/0749-6419(89)90027-2	journal	January 1989
Effects of precipitation phases on the hydrogen embrittlement sensitivity of Inconel 718 Liu, Liufa; Tanaka, Katsumi; Hirose, Akio Science and Technology of Advanced Materials, Vol. 3, Issue 4 https://doi.org/10.1016/S1468-6996(02)00039-6	journal	January 2002
Dislocation/precipitate interactions in IN100 at 650°C Maciejewski, Kimberly; Jouiad, Mustapha; Ghonem, Hamouda Materials Science and Engineering: A, Vol. 582 https://doi.org/10.1016/j.msea.2013.06.004	journal	October 2013
The Role of Collinear Interaction in Dislocation-Induced Hardening Madec, R. Science, Vol. 301, Issue 5641 https://doi.org/10.1126/science.1085477	journal	September 2003
Anomalous phonon stiffening associated with the (1 1 1) antiphase boundary in L12 Ni3Al Manga, Venkateswara Rao; Shang, Shun-Li; Wang, William Yi Acta Materialia, Vol. 82 https://doi.org/10.1016/j.actamat.2014.09.005	journal	January 2015
Effects of cold rolling on the precipitation kinetics and the morphology evolution of intermediate phases in Inconel 718 alloy Mei, Yunpeng; Liu, Yongchang; Liu, Chenxi Journal of Alloys and Compounds, Vol. 649 https://doi.org/10.1016/j.jallcom.2015.07.149	journal	November 2015
Modeling lattice strain evolution at finite strains and experimental verification for copper and stainless steel using in situ neutron diffraction Neil, C. J.; Wollmershauser, J. A.; Clausen, B. International Journal of Plasticity, Vol. 26, Issue 12 https://doi.org/10.1016/j.ijplas.2010.03.005	journal	December 2010
Modelling the orientation and direction dependence of the critical resolved shear stress of nickel-base superalloy single crystals Österle, Werner; Bettge, Dirk; Fedelich, Bernard Acta Materialia, Vol. 48, Issue 3 https://doi.org/10.1016/S1359-6454(99)00404-8	journal	February 2000
"Special points for Brillouin-zone integrations"—a reply Pack, James D.; Monkhorst, Hendrik J. Physical Review B, Vol. 16, Issue 4 https://doi.org/10.1103/PhysRevB.16.1748	journal	August 1977
A theory of the anomalous yield behavior in L12 ordered alloys Paidar, V.; Pope, D. P.; Vitek, V. Acta Metallurgica, Vol. 32, Issue 3 https://doi.org/10.1016/0001-6160(84)90117-2	journal	March 1984
Dissociation and core structure of 〈110〉 screw dislocations in L1 ₂ ordered alloys II. Effects of an applied shear stress Paidar, V.; Yamaguchi, M.; Pope, D. P. Philosophical Magazine A, Vol. 45, Issue 5 https://doi.org/10.1080/01418618208239910	journal	May 1982
Generalized Gradient Approximation Made Simple Perdew, John P.; Burke, Kieron; Ernzerhof, Matthias Physical Review Letters, Vol. 77, Issue 18, p. 3865-3868 https://doi.org/10.1103/PhysRevLett.77.3865	journal	October 1996
Effect of standard heat treatment on the microstructure and mechanical properties of hot isostatically pressed superalloy inconel 718 Rao, G. Appa; Kumar, Mahendra; Srinivas, M. Materials Science and Engineering: A, Vol. 355, Issue 1-2 https://doi.org/10.1016/S0921-5093(03)00079-0	journal	August 2003
Modeling solid solution strengthening in nickel alloys Roth, H. A.; Davis, C. L.; Thomson, R. C. Metallurgical and Materials Transactions A, Vol. 28, Issue 6 https://doi.org/10.1007/s11661-997-0268-2	journal	June 1997
Coupled texture and non-Schmid effects on yield surfaces of body-centered cubic polycrystals predicted by a crystal plasticity finite element approach Savage, Daniel J.; Beyerlein, Irene J.; Knezevic, Marko International Journal of Solids and Structures, Vol. 109 https://doi.org/10.1016/j.ijsolstr.2017.01.003	journal	March 2017
Microstructure-sensitive modeling of polycrystalline IN 100 Shenoy, Mahesh; Tjiptowidjojo, Yustianto; McDowell, David International Journal of Plasticity, Vol. 24, Issue 10 https://doi.org/10.1016/j.ijplas.2008.01.001	journal	October 2008
Structural characterization of the aged Inconel 718 Slama, C.; Abdellaoui, M. Journal of Alloys and Compounds, Vol. 306, Issue 1-2 https://doi.org/10.1016/S0925-8388(00)00789-1	journal	June 2000
Microstructure and mechanical behavior of direct metal laser sintered Inconel alloy 718 Smith, Derek H.; Bicknell, Jonathan; Jorgensen, Luke Materials Characterization, Vol. 113 https://doi.org/10.1016/j.matchar.2016.01.003	journal	March 2016
Phenomena in interrupted tensile tests of heat treated aluminium alloy 6061 Sritharan, T.; Chandel, R. S. Acta Materialia, Vol. 45, Issue 8 https://doi.org/10.1016/S1359-6454(97)00013-X	journal	August 1997
Aspects of non-associated single crystal plasticity: Influence of non-schmid effects and localization analysis Steinmann, P.; Kuhl, E.; Stein, E. International Journal of Solids and Structures, Vol. 35, Issue 33 https://doi.org/10.1016/S0020-7683(97)00241-2	journal	November 1998
A study of residual stresses in Zircaloy-2 with rod texture Turner, P. A.; Tomé, C. N. Acta Metallurgica et Materialia, Vol. 42, Issue 12 https://doi.org/10.1016/0956-7151(94)90191-0	journal	December 1994
The asymmetry of the flow stress in Ni3(Al,Ta) single crystals Umakoshi, Y.; Pope, D. P.; Vitek, V. Acta Metallurgica, Vol. 32, Issue 3 https://doi.org/10.1016/0001-6160(84)90118-4	journal	March 1984
On the presence of super lattice intrinsic stacking faults in plastically deformed Ni ₃ Al Veyssiere, P.; Douin, J.; Beauchamp, P. Philosophical Magazine A, Vol. 51, Issue 3 https://doi.org/10.1080/01418618508237567	journal	March 1985
Microstructure-Based Multiscale Constitutive Modeling of of γ — γ′ Nickel-Base Superalloys Wang, A. -J.; Kumar, R. S.; Shenoy, M. M. International Journal for Multiscale Computational Engineering, Vol. 4, Issue 5-6 https://doi.org/10.1615/IntJMultCompEng.v4.i5-6.70	journal	January 2006
Effect of double aging treatment on structure in Inconel 718 alloy Wang, Changzheng; Li, Rongbin Journal of Materials Science, Vol. 39, Issue 7 https://doi.org/10.1023/B:JMSC.0000020036.96777.9c	journal	April 2004
Mechanical behavior of Mg subjected to strain path changes: Experiments and modeling Wen, W.; Borodachenkova, M.; Tomé, C. N. International Journal of Plasticity, Vol. 73 https://doi.org/10.1016/j.ijplas.2014.10.009	journal	October 2015
The Effects of Long Time Exposure on Alloy 718 Wlodek, S. T.; Field, R. D. Superalloys 718, 625, 706 and Various Derivatives (1994) https://doi.org/10.7449/1994/Superalloys_1994_659_670	conference	January 1994
Inhomogeneous deformation in INCONEL 718 during monotonic and cyclic loadings Worthem, D. W.; Robertson, I. M.; Leckie, F. A. Metallurgical Transactions A, Vol. 21, Issue 12 https://doi.org/10.1007/BF02647316	journal	December 1990
Shearing of γ″ precipitates and formation of planar slip bands in Inconel 718 during cyclic deformation Xiao, L.; Chen, D. L.; Chaturvedi, M. C. Scripta Materialia, Vol. 52, Issue 7 https://doi.org/10.1016/j.scriptamat.2004.11.023	journal	April 2005
Cyclic deformation mechanisms of precipitation-hardened Inconel 718 superalloy Xiao, L.; Chen, D. L.; Chaturvedi, M. C. Materials Science and Engineering: A, Vol. 483-484 https://doi.org/10.1016/j.msea.2006.10.181	journal	June 2008
Dissociation and core structure of 〈110〉 screw dislocations in L1 ₂ ordered alloys I. Core structure in an unstressed crystal Yamaguchi, M.; Paidar, V.; Pope, D. P. Philosophical Magazine A, Vol. 45, Issue 5 https://doi.org/10.1080/01418618208239909	journal	May 1982
Crack-tip dislocations and fracture behavior in Ni3Al and Ni3Si Yoo, M. H.; Fu, C. L.; Horton, J. A. Materials Science and Engineering: A, Vol. 176, Issue 1-2 https://doi.org/10.1016/0921-5093(94)91011-1	journal	March 1994
The effects of temperature, composition and strain rate on the deformation microstructure of Ni ₃ Al Yu, H. F.; Jones, I. P.; Smallman, R. E. Philosophical Magazine A, Vol. 70, Issue 6 https://doi.org/10.1080/01418619408242942	journal	December 1994
Coupling elasto-plastic self-consistent crystal plasticity and implicit finite elements: Applications to compression, cyclic tension-compression, and bending to large strains Zecevic, Milovan; Beyerlein, Irene J.; Knezevic, Marko International Journal of Plasticity, Vol. 93 https://doi.org/10.1016/j.ijplas.2016.07.016	journal	June 2017
A dislocation density based elasto-plastic self-consistent model for the prediction of cyclic deformation: Application to AA6022-T4 Zecevic, Milovan; Knezevic, Marko International Journal of Plasticity, Vol. 72 https://doi.org/10.1016/j.ijplas.2015.05.018	journal	September 2015
Modeling of Sheet Metal Forming Based on Implicit Embedding of the Elasto-Plastic Self-Consistent Formulation in Shell Elements: Application to Cup Drawing of AA6022-T4 Zecevic, Milovan; Knezevic, Marko JOM, Vol. 69, Issue 5 https://doi.org/10.1007/s11837-017-2255-4	journal	February 2017
An elasto-plastic self-consistent model with hardening based on dislocation density, twinning and de-twinning: Application to strain path changes in HCP metals Zecevic, Milovan; Knezevic, Marko; Beyerlein, Irene J. Materials Science and Engineering: A, Vol. 638 https://doi.org/10.1016/j.msea.2015.04.066	journal	June 2015
Dual-phase steel sheets under cyclic tension–compression to large strains: Experiments and crystal plasticity modeling Zecevic, Milovan; Korkolis, Yannis P.; Kuwabara, Toshihiko Journal of the Mechanics and Physics of Solids, Vol. 96 https://doi.org/10.1016/j.jmps.2016.07.003	journal	November 2016
Interaction of forming temperature and grain size effect in micro/meso-scale plastic deformation of nickel-base superalloy Zhao, R.; Han, J. Q.; Liu, B. B. Materials & Design, Vol. 94 https://doi.org/10.1016/j.matdes.2016.01.022	journal	March 2016

Cited By (2)

Experimental studies into the role of cyclic bending during stretching of dual-phase steel sheets Poulin, Camille M.; Vogel, Sven C.; Korkolis, Yannis P. International Journal of Material Forming, Vol. 13, Issue 3 https://doi.org/10.1007/s12289-019-01530-2	journal	January 2020
Low‐cycle fatigue behavior of rolled WE43‐T5 magnesium alloy Ghorbanpour, Saeede; McWilliams, Brandon A.; Knezevic, Marko Fatigue & Fracture of Engineering Materials & Structures, Vol. 42, Issue 6 https://doi.org/10.1111/ffe.12992	journal	March 2019

Similar Records

Synergistic effect of microstructure and defects on the initiation of fatigue cracks in additively manufactured Inconel 718

Journal Article · Fri May 13 00:00:00 EDT 2022 · International Journal of Fatigue · OSTI ID:1396145

Dodaran, Mohammad S.; Muhammad, Muztahid; Shamsaei, Nima; +1 more

Characterization of precipitation in gradient Inconel 718 superalloy

Journal Article · Wed Dec 23 00:00:00 EST 2020 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing · OSTI ID:1396145

Ding, Jie; Xue, S.; Shang, Z.; +6 more

An investigation into the effects of cyclic strain rate on the high cycle and very high cycle fatigue behaviors of wrought and additively manufactured Inconel 718

Journal Article · Mon Nov 23 00:00:00 EST 2020 · International Journal of Fatigue · OSTI ID:1396145

Muhammad, Muztahid; Frye, Palmer; Simsiriwong, Jutima; +2 more

Related Subjects

36 MATERIALS SCIENCE
Material Science

Title: A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718

Citation Formats

References (98)

Cited By (2)

Similar Records

Related Subjects